mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-27 13:30:52 +00:00
33e30f11c7
There is no 'slave match interrupt' enable bit in the Interrupt Control Register. Consider it is always enabled and extend the mask value 'bus->regs[intr_ctrl_reg]' with the SLAVE_ADDR_RX_MATCH bit when the interrupt is raised. Signed-off-by: Cédric Le Goater <clg@kaod.org>
1243 lines
42 KiB
C
1243 lines
42 KiB
C
/*
|
|
* ARM Aspeed I2C controller
|
|
*
|
|
* Copyright (C) 2016 IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/sysbus.h"
|
|
#include "migration/vmstate.h"
|
|
#include "qemu/cutils.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/module.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/i2c/aspeed_i2c.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "hw/registerfields.h"
|
|
#include "trace.h"
|
|
|
|
/* Enable SLAVE_ADDR_RX_MATCH always */
|
|
#define R_I2CD_INTR_STS_ALWAYS_ENABLE R_I2CD_INTR_STS_SLAVE_ADDR_RX_MATCH_MASK
|
|
|
|
static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
|
|
uint32_t intr_ctrl_reg = aspeed_i2c_bus_intr_ctrl_offset(bus);
|
|
uint32_t intr_ctrl_mask = bus->regs[intr_ctrl_reg] |
|
|
R_I2CD_INTR_STS_ALWAYS_ENABLE;
|
|
bool raise_irq;
|
|
|
|
if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_RAISE_INTERRUPT)) {
|
|
g_autofree char *buf = g_strdup_printf("%s%s%s%s%s%s%s",
|
|
aspeed_i2c_bus_pkt_mode_en(bus) &&
|
|
ARRAY_FIELD_EX32(bus->regs, I2CM_INTR_STS, PKT_CMD_DONE) ?
|
|
"pktdone|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, TX_NAK) ?
|
|
"nak|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, TX_ACK) ?
|
|
"ack|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, RX_DONE) ?
|
|
"done|" : "",
|
|
ARRAY_FIELD_EX32(bus->regs, I2CD_INTR_STS, SLAVE_ADDR_RX_MATCH) ?
|
|
"slave-match|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, NORMAL_STOP) ?
|
|
"normal|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, ABNORMAL) ?
|
|
"abnormal" : "");
|
|
|
|
trace_aspeed_i2c_bus_raise_interrupt(bus->regs[reg_intr_sts], buf);
|
|
}
|
|
|
|
raise_irq = bus->regs[reg_intr_sts] & intr_ctrl_mask ;
|
|
|
|
/* In packet mode we don't mask off INTR_STS */
|
|
if (!aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
bus->regs[reg_intr_sts] &= intr_ctrl_mask;
|
|
}
|
|
|
|
if (raise_irq) {
|
|
bus->controller->intr_status |= 1 << bus->id;
|
|
qemu_irq_raise(aic->bus_get_irq(bus));
|
|
}
|
|
}
|
|
|
|
static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
uint64_t value = bus->regs[offset / sizeof(*bus->regs)];
|
|
|
|
switch (offset) {
|
|
case A_I2CD_FUN_CTRL:
|
|
case A_I2CD_AC_TIMING1:
|
|
case A_I2CD_AC_TIMING2:
|
|
case A_I2CD_INTR_CTRL:
|
|
case A_I2CD_INTR_STS:
|
|
case A_I2CD_DEV_ADDR:
|
|
case A_I2CD_POOL_CTRL:
|
|
case A_I2CD_BYTE_BUF:
|
|
/* Value is already set, don't do anything. */
|
|
break;
|
|
case A_I2CD_CMD:
|
|
value = SHARED_FIELD_DP32(value, BUS_BUSY_STS, i2c_bus_busy(bus->bus));
|
|
break;
|
|
case A_I2CD_DMA_ADDR:
|
|
if (!aic->has_dma) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
value = -1;
|
|
}
|
|
break;
|
|
case A_I2CD_DMA_LEN:
|
|
if (!aic->has_dma) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
value = -1;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
|
|
value = -1;
|
|
break;
|
|
}
|
|
|
|
trace_aspeed_i2c_bus_read(bus->id, offset, size, value);
|
|
return value;
|
|
}
|
|
|
|
static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
uint64_t value = bus->regs[offset / sizeof(*bus->regs)];
|
|
|
|
switch (offset) {
|
|
case A_I2CC_FUN_CTRL:
|
|
case A_I2CC_AC_TIMING:
|
|
case A_I2CC_POOL_CTRL:
|
|
case A_I2CM_INTR_CTRL:
|
|
case A_I2CM_INTR_STS:
|
|
case A_I2CC_MS_TXRX_BYTE_BUF:
|
|
case A_I2CM_DMA_LEN:
|
|
case A_I2CM_DMA_TX_ADDR:
|
|
case A_I2CM_DMA_RX_ADDR:
|
|
case A_I2CM_DMA_LEN_STS:
|
|
case A_I2CC_DMA_ADDR:
|
|
case A_I2CC_DMA_LEN:
|
|
/* Value is already set, don't do anything. */
|
|
break;
|
|
case A_I2CM_CMD:
|
|
value = SHARED_FIELD_DP32(value, BUS_BUSY_STS, i2c_bus_busy(bus->bus));
|
|
break;
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
|
|
value = -1;
|
|
break;
|
|
}
|
|
|
|
trace_aspeed_i2c_bus_read(bus->id, offset, size, value);
|
|
return value;
|
|
}
|
|
|
|
static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
AspeedI2CBus *bus = opaque;
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
return aspeed_i2c_bus_new_read(bus, offset, size);
|
|
}
|
|
return aspeed_i2c_bus_old_read(bus, offset, size);
|
|
}
|
|
|
|
static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state)
|
|
{
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, R_I2CC_MS_TXRX_BYTE_BUF, TX_STATE,
|
|
state);
|
|
} else {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, R_I2CD_CMD, TX_STATE, state);
|
|
}
|
|
}
|
|
|
|
static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus)
|
|
{
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
return SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CC_MS_TXRX_BYTE_BUF,
|
|
TX_STATE);
|
|
}
|
|
return SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CD_CMD, TX_STATE);
|
|
}
|
|
|
|
static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data)
|
|
{
|
|
MemTxResult result;
|
|
AspeedI2CState *s = bus->controller;
|
|
uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
|
|
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
|
|
|
|
result = address_space_read(&s->dram_as, bus->regs[reg_dma_addr],
|
|
MEMTXATTRS_UNSPECIFIED, data, 1);
|
|
if (result != MEMTX_OK) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n",
|
|
__func__, bus->regs[reg_dma_addr]);
|
|
return -1;
|
|
}
|
|
|
|
bus->regs[reg_dma_addr]++;
|
|
bus->regs[reg_dma_len]--;
|
|
return 0;
|
|
}
|
|
|
|
static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
int ret = -1;
|
|
int i;
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
|
|
uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
|
|
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
|
|
int pool_tx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
|
|
TX_COUNT);
|
|
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
|
|
for (i = pool_start; i < pool_tx_count; i++) {
|
|
uint8_t *pool_base = aic->bus_pool_base(bus);
|
|
|
|
trace_aspeed_i2c_bus_send("BUF", i + 1, pool_tx_count,
|
|
pool_base[i]);
|
|
ret = i2c_send(bus->bus, pool_base[i]);
|
|
if (ret) {
|
|
break;
|
|
}
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, TX_BUFF_EN, 0);
|
|
} else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) {
|
|
/* In new mode, clear how many bytes we TXed */
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN_STS, TX_LEN, 0);
|
|
}
|
|
while (bus->regs[reg_dma_len]) {
|
|
uint8_t data;
|
|
aspeed_i2c_dma_read(bus, &data);
|
|
trace_aspeed_i2c_bus_send("DMA", bus->regs[reg_dma_len],
|
|
bus->regs[reg_dma_len], data);
|
|
ret = i2c_send(bus->bus, data);
|
|
if (ret) {
|
|
break;
|
|
}
|
|
/* In new mode, keep track of how many bytes we TXed */
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN_STS, TX_LEN,
|
|
ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN_STS,
|
|
TX_LEN) + 1);
|
|
}
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, TX_DMA_EN, 0);
|
|
} else {
|
|
trace_aspeed_i2c_bus_send("BYTE", pool_start, 1,
|
|
bus->regs[reg_byte_buf]);
|
|
ret = i2c_send(bus->bus, bus->regs[reg_byte_buf]);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
|
|
{
|
|
AspeedI2CState *s = bus->controller;
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
|
|
uint8_t data;
|
|
int i;
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
|
|
uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
|
|
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
|
|
uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
|
|
int pool_rx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
|
|
RX_COUNT);
|
|
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
|
|
uint8_t *pool_base = aic->bus_pool_base(bus);
|
|
|
|
for (i = 0; i < pool_rx_count; i++) {
|
|
pool_base[i] = i2c_recv(bus->bus);
|
|
trace_aspeed_i2c_bus_recv("BUF", i + 1, pool_rx_count,
|
|
pool_base[i]);
|
|
}
|
|
|
|
/* Update RX count */
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_pool_ctrl, RX_COUNT, i & 0xff);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, RX_BUFF_EN, 0);
|
|
} else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN)) {
|
|
uint8_t data;
|
|
/* In new mode, clear how many bytes we RXed */
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN_STS, RX_LEN, 0);
|
|
}
|
|
|
|
while (bus->regs[reg_dma_len]) {
|
|
MemTxResult result;
|
|
|
|
data = i2c_recv(bus->bus);
|
|
trace_aspeed_i2c_bus_recv("DMA", bus->regs[reg_dma_len],
|
|
bus->regs[reg_dma_len], data);
|
|
result = address_space_write(&s->dram_as, bus->regs[reg_dma_addr],
|
|
MEMTXATTRS_UNSPECIFIED, &data, 1);
|
|
if (result != MEMTX_OK) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n",
|
|
__func__, bus->regs[reg_dma_addr]);
|
|
return;
|
|
}
|
|
bus->regs[reg_dma_addr]++;
|
|
bus->regs[reg_dma_len]--;
|
|
/* In new mode, keep track of how many bytes we RXed */
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN_STS, RX_LEN,
|
|
ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN_STS,
|
|
RX_LEN) + 1);
|
|
}
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, RX_DMA_EN, 0);
|
|
} else {
|
|
data = i2c_recv(bus->bus);
|
|
trace_aspeed_i2c_bus_recv("BYTE", 1, 1, bus->regs[reg_byte_buf]);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_byte_buf, RX_BUF, data);
|
|
}
|
|
}
|
|
|
|
static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus)
|
|
{
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
|
|
|
|
aspeed_i2c_set_state(bus, I2CD_MRXD);
|
|
aspeed_i2c_bus_recv(bus);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, RX_DONE, 1);
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_S_RX_CMD_LAST)) {
|
|
i2c_nack(bus->bus);
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_RX_CMD, 0);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_S_RX_CMD_LAST, 0);
|
|
aspeed_i2c_set_state(bus, I2CD_MACTIVE);
|
|
}
|
|
|
|
static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
return (ARRAY_FIELD_EX32(bus->regs, I2CM_CMD, PKT_DEV_ADDR) << 1) |
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_RX_CMD);
|
|
}
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
|
|
uint8_t *pool_base = aic->bus_pool_base(bus);
|
|
|
|
return pool_base[0];
|
|
} else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) {
|
|
uint8_t data;
|
|
|
|
aspeed_i2c_dma_read(bus, &data);
|
|
return data;
|
|
} else {
|
|
return bus->regs[reg_byte_buf];
|
|
}
|
|
}
|
|
|
|
static bool aspeed_i2c_check_sram(AspeedI2CBus *bus)
|
|
{
|
|
AspeedI2CState *s = bus->controller;
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
bool dma_en = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN);
|
|
if (!aic->check_sram) {
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* AST2500: SRAM must be enabled before using the Buffer Pool or
|
|
* DMA mode.
|
|
*/
|
|
if (!FIELD_EX32(s->ctrl_global, I2C_CTRL_GLOBAL, SRAM_EN) && dma_en) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: SRAM is not enabled\n", __func__);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus)
|
|
{
|
|
g_autofree char *cmd_flags = NULL;
|
|
uint32_t count;
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
|
|
uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
|
|
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
|
|
count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT);
|
|
} else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN)) {
|
|
count = bus->regs[reg_dma_len];
|
|
} else { /* BYTE mode */
|
|
count = 1;
|
|
}
|
|
|
|
cmd_flags = g_strdup_printf("%s%s%s%s%s%s%s%s%s",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_START_CMD) ? "start|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN) ? "rxdma|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN) ? "txdma|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN) ? "rxbuf|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN) ? "txbuf|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_TX_CMD) ? "tx|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_RX_CMD) ? "rx|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_S_RX_CMD_LAST) ? "last|" : "",
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_STOP_CMD) ? "stop|" : "");
|
|
|
|
trace_aspeed_i2c_bus_cmd(bus->regs[reg_cmd], cmd_flags, count,
|
|
bus->regs[reg_intr_sts]);
|
|
}
|
|
|
|
/*
|
|
* The state machine needs some refinement. It is only used to track
|
|
* invalid STOP commands for the moment.
|
|
*/
|
|
static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
|
|
{
|
|
uint8_t pool_start = 0;
|
|
uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
|
|
uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
|
|
uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
|
|
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
|
|
|
|
if (!aspeed_i2c_check_sram(bus)) {
|
|
return;
|
|
}
|
|
|
|
if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_CMD)) {
|
|
aspeed_i2c_bus_cmd_dump(bus);
|
|
}
|
|
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_START_CMD)) {
|
|
uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ?
|
|
I2CD_MSTARTR : I2CD_MSTART;
|
|
uint8_t addr;
|
|
|
|
aspeed_i2c_set_state(bus, state);
|
|
|
|
addr = aspeed_i2c_get_addr(bus);
|
|
if (i2c_start_transfer(bus->bus, extract32(addr, 1, 7),
|
|
extract32(addr, 0, 1))) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_NAK, 1);
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_INTR_STS, PKT_CMD_FAIL, 1);
|
|
}
|
|
} else {
|
|
/* START doesn't set TX_ACK in packet mode */
|
|
if (!aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_ACK, 1);
|
|
}
|
|
}
|
|
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_START_CMD, 0);
|
|
|
|
/*
|
|
* The START command is also a TX command, as the slave
|
|
* address is sent on the bus. Drop the TX flag if nothing
|
|
* else needs to be sent in this sequence.
|
|
*/
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT)
|
|
== 1) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
|
|
} else {
|
|
/*
|
|
* Increase the start index in the TX pool buffer to
|
|
* skip the address byte.
|
|
*/
|
|
pool_start++;
|
|
}
|
|
} else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) {
|
|
if (bus->regs[reg_dma_len] == 0) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
|
|
}
|
|
} else {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
|
|
}
|
|
|
|
/* No slave found */
|
|
if (!i2c_bus_busy(bus->bus)) {
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_INTR_STS, PKT_CMD_FAIL, 1);
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_INTR_STS, PKT_CMD_DONE, 1);
|
|
}
|
|
return;
|
|
}
|
|
aspeed_i2c_set_state(bus, I2CD_MACTIVE);
|
|
}
|
|
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_TX_CMD)) {
|
|
aspeed_i2c_set_state(bus, I2CD_MTXD);
|
|
if (aspeed_i2c_bus_send(bus, pool_start)) {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_NAK, 1);
|
|
i2c_end_transfer(bus->bus);
|
|
} else {
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_ACK, 1);
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
|
|
aspeed_i2c_set_state(bus, I2CD_MACTIVE);
|
|
}
|
|
|
|
if ((SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_RX_CMD) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_S_RX_CMD_LAST)) &&
|
|
!SHARED_ARRAY_FIELD_EX32(bus->regs, reg_intr_sts, RX_DONE)) {
|
|
aspeed_i2c_handle_rx_cmd(bus);
|
|
}
|
|
|
|
if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_STOP_CMD)) {
|
|
if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, ABNORMAL, 1);
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_INTR_STS, PKT_CMD_FAIL, 1);
|
|
}
|
|
} else {
|
|
aspeed_i2c_set_state(bus, I2CD_MSTOP);
|
|
i2c_end_transfer(bus->bus);
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, NORMAL_STOP, 1);
|
|
}
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_STOP_CMD, 0);
|
|
aspeed_i2c_set_state(bus, I2CD_IDLE);
|
|
}
|
|
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_INTR_STS, PKT_CMD_DONE, 1);
|
|
}
|
|
}
|
|
|
|
static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
bool handle_rx;
|
|
bool w1t;
|
|
|
|
trace_aspeed_i2c_bus_write(bus->id, offset, size, value);
|
|
|
|
switch (offset) {
|
|
case A_I2CC_FUN_CTRL:
|
|
if (SHARED_FIELD_EX32(value, SLAVE_EN)) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
bus->regs[R_I2CD_FUN_CTRL] = value & 0x007dc3ff;
|
|
break;
|
|
case A_I2CC_AC_TIMING:
|
|
bus->regs[R_I2CC_AC_TIMING] = value & 0x1ffff0ff;
|
|
break;
|
|
case A_I2CC_MS_TXRX_BYTE_BUF:
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, R_I2CC_MS_TXRX_BYTE_BUF, TX_BUF,
|
|
value);
|
|
break;
|
|
case A_I2CC_POOL_CTRL:
|
|
bus->regs[R_I2CC_POOL_CTRL] &= ~0xffffff;
|
|
bus->regs[R_I2CC_POOL_CTRL] |= (value & 0xffffff);
|
|
break;
|
|
case A_I2CM_INTR_CTRL:
|
|
bus->regs[R_I2CM_INTR_CTRL] = value & 0x0007f07f;
|
|
break;
|
|
case A_I2CM_INTR_STS:
|
|
handle_rx = SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CM_INTR_STS, RX_DONE)
|
|
&& SHARED_FIELD_EX32(value, RX_DONE);
|
|
|
|
/* In packet mode, clearing PKT_CMD_DONE clears other interrupts. */
|
|
if (aspeed_i2c_bus_pkt_mode_en(bus) &&
|
|
FIELD_EX32(value, I2CM_INTR_STS, PKT_CMD_DONE)) {
|
|
bus->regs[R_I2CM_INTR_STS] &= 0xf0001000;
|
|
if (!bus->regs[R_I2CM_INTR_STS]) {
|
|
bus->controller->intr_status &= ~(1 << bus->id);
|
|
qemu_irq_lower(aic->bus_get_irq(bus));
|
|
}
|
|
break;
|
|
}
|
|
bus->regs[R_I2CM_INTR_STS] &= ~(value & 0xf007f07f);
|
|
if (!bus->regs[R_I2CM_INTR_STS]) {
|
|
bus->controller->intr_status &= ~(1 << bus->id);
|
|
qemu_irq_lower(aic->bus_get_irq(bus));
|
|
}
|
|
if (handle_rx && (SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CM_CMD,
|
|
M_RX_CMD) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CM_CMD,
|
|
M_S_RX_CMD_LAST))) {
|
|
aspeed_i2c_handle_rx_cmd(bus);
|
|
aspeed_i2c_bus_raise_interrupt(bus);
|
|
}
|
|
break;
|
|
case A_I2CM_CMD:
|
|
if (!aspeed_i2c_bus_is_enabled(bus)) {
|
|
break;
|
|
}
|
|
|
|
if (!aspeed_i2c_bus_is_master(bus)) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
|
|
if (!aic->has_dma &&
|
|
(SHARED_FIELD_EX32(value, RX_DMA_EN) ||
|
|
SHARED_FIELD_EX32(value, TX_DMA_EN))) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
break;
|
|
}
|
|
|
|
if (bus->regs[R_I2CM_INTR_STS] & 0xffff0000) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: Packet mode is not implemented\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
|
|
value &= 0xff0ffbfb;
|
|
if (ARRAY_FIELD_EX32(bus->regs, I2CM_CMD, W1_CTRL)) {
|
|
bus->regs[R_I2CM_CMD] |= value;
|
|
} else {
|
|
bus->regs[R_I2CM_CMD] = value;
|
|
}
|
|
|
|
aspeed_i2c_bus_handle_cmd(bus, value);
|
|
aspeed_i2c_bus_raise_interrupt(bus);
|
|
break;
|
|
case A_I2CM_DMA_TX_ADDR:
|
|
bus->regs[R_I2CM_DMA_TX_ADDR] = FIELD_EX32(value, I2CM_DMA_TX_ADDR,
|
|
ADDR);
|
|
bus->regs[R_I2CC_DMA_ADDR] = FIELD_EX32(value, I2CM_DMA_TX_ADDR, ADDR);
|
|
bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
|
|
TX_BUF_LEN) + 1;
|
|
break;
|
|
case A_I2CM_DMA_RX_ADDR:
|
|
bus->regs[R_I2CM_DMA_RX_ADDR] = FIELD_EX32(value, I2CM_DMA_RX_ADDR,
|
|
ADDR);
|
|
bus->regs[R_I2CC_DMA_ADDR] = FIELD_EX32(value, I2CM_DMA_RX_ADDR, ADDR);
|
|
bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
|
|
RX_BUF_LEN) + 1;
|
|
break;
|
|
case A_I2CM_DMA_LEN:
|
|
w1t = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN_W1T) ||
|
|
ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN_W1T);
|
|
/* If none of the w1t bits are set, just write to the reg as normal. */
|
|
if (!w1t) {
|
|
bus->regs[R_I2CM_DMA_LEN] = value;
|
|
break;
|
|
}
|
|
if (ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN_W1T)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN,
|
|
FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN));
|
|
}
|
|
if (ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN_W1T)) {
|
|
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN,
|
|
FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN));
|
|
}
|
|
break;
|
|
case A_I2CM_DMA_LEN_STS:
|
|
/* Writes clear to 0 */
|
|
bus->regs[R_I2CM_DMA_LEN_STS] = 0;
|
|
break;
|
|
case A_I2CC_DMA_ADDR:
|
|
case A_I2CC_DMA_LEN:
|
|
/* RO */
|
|
break;
|
|
case A_I2CS_DMA_LEN_STS:
|
|
case A_I2CS_DMA_TX_ADDR:
|
|
case A_I2CS_DMA_RX_ADDR:
|
|
case A_I2CS_DEV_ADDR:
|
|
case A_I2CS_INTR_CTRL:
|
|
case A_I2CS_INTR_STS:
|
|
case A_I2CS_CMD:
|
|
case A_I2CS_DMA_LEN:
|
|
qemu_log_mask(LOG_UNIMP, "%s: Slave mode is not implemented\n",
|
|
__func__);
|
|
break;
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
}
|
|
}
|
|
|
|
static void aspeed_i2c_bus_old_write(AspeedI2CBus *bus, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
|
|
bool handle_rx;
|
|
|
|
trace_aspeed_i2c_bus_write(bus->id, offset, size, value);
|
|
|
|
switch (offset) {
|
|
case A_I2CD_FUN_CTRL:
|
|
if (SHARED_FIELD_EX32(value, SLAVE_EN)) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
bus->regs[R_I2CD_FUN_CTRL] = value & 0x0071C3FF;
|
|
break;
|
|
case A_I2CD_AC_TIMING1:
|
|
bus->regs[R_I2CD_AC_TIMING1] = value & 0xFFFFF0F;
|
|
break;
|
|
case A_I2CD_AC_TIMING2:
|
|
bus->regs[R_I2CD_AC_TIMING2] = value & 0x7;
|
|
break;
|
|
case A_I2CD_INTR_CTRL:
|
|
bus->regs[R_I2CD_INTR_CTRL] = value & 0x7FFF;
|
|
break;
|
|
case A_I2CD_INTR_STS:
|
|
handle_rx = SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CD_INTR_STS, RX_DONE)
|
|
&& SHARED_FIELD_EX32(value, RX_DONE);
|
|
bus->regs[R_I2CD_INTR_STS] &= ~(value & 0x7FFF);
|
|
if (!bus->regs[R_I2CD_INTR_STS]) {
|
|
bus->controller->intr_status &= ~(1 << bus->id);
|
|
qemu_irq_lower(aic->bus_get_irq(bus));
|
|
}
|
|
if (handle_rx && (SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CD_CMD,
|
|
M_RX_CMD) ||
|
|
SHARED_ARRAY_FIELD_EX32(bus->regs, R_I2CD_CMD,
|
|
M_S_RX_CMD_LAST))) {
|
|
aspeed_i2c_handle_rx_cmd(bus);
|
|
aspeed_i2c_bus_raise_interrupt(bus);
|
|
}
|
|
break;
|
|
case A_I2CD_DEV_ADDR:
|
|
bus->regs[R_I2CD_DEV_ADDR] = value;
|
|
break;
|
|
case A_I2CD_POOL_CTRL:
|
|
bus->regs[R_I2CD_POOL_CTRL] &= ~0xffffff;
|
|
bus->regs[R_I2CD_POOL_CTRL] |= (value & 0xffffff);
|
|
break;
|
|
|
|
case A_I2CD_BYTE_BUF:
|
|
SHARED_ARRAY_FIELD_DP32(bus->regs, R_I2CD_BYTE_BUF, TX_BUF, value);
|
|
break;
|
|
case A_I2CD_CMD:
|
|
if (!aspeed_i2c_bus_is_enabled(bus)) {
|
|
break;
|
|
}
|
|
|
|
if (!aspeed_i2c_bus_is_master(bus)) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
|
|
if (!aic->has_dma &&
|
|
(SHARED_FIELD_EX32(value, RX_DMA_EN) ||
|
|
SHARED_FIELD_EX32(value, TX_DMA_EN))) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
break;
|
|
}
|
|
|
|
bus->regs[R_I2CD_CMD] &= ~0xFFFF;
|
|
bus->regs[R_I2CD_CMD] |= value & 0xFFFF;
|
|
|
|
aspeed_i2c_bus_handle_cmd(bus, value);
|
|
aspeed_i2c_bus_raise_interrupt(bus);
|
|
break;
|
|
case A_I2CD_DMA_ADDR:
|
|
if (!aic->has_dma) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
break;
|
|
}
|
|
|
|
bus->regs[R_I2CD_DMA_ADDR] = value & 0x3ffffffc;
|
|
break;
|
|
|
|
case A_I2CD_DMA_LEN:
|
|
if (!aic->has_dma) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
|
|
break;
|
|
}
|
|
|
|
bus->regs[R_I2CD_DMA_LEN] = value & 0xfff;
|
|
if (!bus->regs[R_I2CD_DMA_LEN]) {
|
|
qemu_log_mask(LOG_UNIMP, "%s: invalid DMA length\n", __func__);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
}
|
|
}
|
|
|
|
static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
AspeedI2CBus *bus = opaque;
|
|
if (aspeed_i2c_is_new_mode(bus->controller)) {
|
|
aspeed_i2c_bus_new_write(bus, offset, value, size);
|
|
} else {
|
|
aspeed_i2c_bus_old_write(bus, offset, value, size);
|
|
}
|
|
}
|
|
|
|
static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
AspeedI2CState *s = opaque;
|
|
|
|
switch (offset) {
|
|
case A_I2C_CTRL_STATUS:
|
|
return s->intr_status;
|
|
case A_I2C_CTRL_GLOBAL:
|
|
return s->ctrl_global;
|
|
case A_I2C_CTRL_NEW_CLK_DIVIDER:
|
|
if (aspeed_i2c_is_new_mode(s)) {
|
|
return s->new_clk_divider;
|
|
}
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
break;
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
break;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
AspeedI2CState *s = opaque;
|
|
|
|
switch (offset) {
|
|
case A_I2C_CTRL_GLOBAL:
|
|
s->ctrl_global = value;
|
|
break;
|
|
case A_I2C_CTRL_NEW_CLK_DIVIDER:
|
|
if (aspeed_i2c_is_new_mode(s)) {
|
|
s->new_clk_divider = value;
|
|
} else {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx
|
|
"\n", __func__, offset);
|
|
}
|
|
break;
|
|
case A_I2C_CTRL_STATUS:
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps aspeed_i2c_bus_ops = {
|
|
.read = aspeed_i2c_bus_read,
|
|
.write = aspeed_i2c_bus_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
};
|
|
|
|
static const MemoryRegionOps aspeed_i2c_ctrl_ops = {
|
|
.read = aspeed_i2c_ctrl_read,
|
|
.write = aspeed_i2c_ctrl_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
};
|
|
|
|
static uint64_t aspeed_i2c_pool_read(void *opaque, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
AspeedI2CState *s = opaque;
|
|
uint64_t ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
ret |= (uint64_t) s->pool[offset + i] << (8 * i);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void aspeed_i2c_pool_write(void *opaque, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
AspeedI2CState *s = opaque;
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
s->pool[offset + i] = (value >> (8 * i)) & 0xFF;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps aspeed_i2c_pool_ops = {
|
|
.read = aspeed_i2c_pool_read,
|
|
.write = aspeed_i2c_pool_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 4,
|
|
},
|
|
};
|
|
|
|
static const VMStateDescription aspeed_i2c_bus_vmstate = {
|
|
.name = TYPE_ASPEED_I2C,
|
|
.version_id = 5,
|
|
.minimum_version_id = 5,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32_ARRAY(regs, AspeedI2CBus, ASPEED_I2C_NEW_NUM_REG),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription aspeed_i2c_vmstate = {
|
|
.name = TYPE_ASPEED_I2C,
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32(intr_status, AspeedI2CState),
|
|
VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState,
|
|
ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate,
|
|
AspeedI2CBus),
|
|
VMSTATE_UINT8_ARRAY(pool, AspeedI2CState, ASPEED_I2C_MAX_POOL_SIZE),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void aspeed_i2c_reset(DeviceState *dev)
|
|
{
|
|
AspeedI2CState *s = ASPEED_I2C(dev);
|
|
|
|
s->intr_status = 0;
|
|
}
|
|
|
|
static void aspeed_i2c_instance_init(Object *obj)
|
|
{
|
|
AspeedI2CState *s = ASPEED_I2C(obj);
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
|
|
int i;
|
|
|
|
for (i = 0; i < aic->num_busses; i++) {
|
|
object_initialize_child(obj, "bus[*]", &s->busses[i],
|
|
TYPE_ASPEED_I2C_BUS);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Address Definitions (AST2400 and AST2500)
|
|
*
|
|
* 0x000 ... 0x03F: Global Register
|
|
* 0x040 ... 0x07F: Device 1
|
|
* 0x080 ... 0x0BF: Device 2
|
|
* 0x0C0 ... 0x0FF: Device 3
|
|
* 0x100 ... 0x13F: Device 4
|
|
* 0x140 ... 0x17F: Device 5
|
|
* 0x180 ... 0x1BF: Device 6
|
|
* 0x1C0 ... 0x1FF: Device 7
|
|
* 0x200 ... 0x2FF: Buffer Pool (unused in linux driver)
|
|
* 0x300 ... 0x33F: Device 8
|
|
* 0x340 ... 0x37F: Device 9
|
|
* 0x380 ... 0x3BF: Device 10
|
|
* 0x3C0 ... 0x3FF: Device 11
|
|
* 0x400 ... 0x43F: Device 12
|
|
* 0x440 ... 0x47F: Device 13
|
|
* 0x480 ... 0x4BF: Device 14
|
|
* 0x800 ... 0xFFF: Buffer Pool (unused in linux driver)
|
|
*/
|
|
static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
int i;
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
AspeedI2CState *s = ASPEED_I2C(dev);
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
|
|
|
|
sysbus_init_irq(sbd, &s->irq);
|
|
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s,
|
|
"aspeed.i2c", 0x1000);
|
|
sysbus_init_mmio(sbd, &s->iomem);
|
|
|
|
for (i = 0; i < aic->num_busses; i++) {
|
|
Object *bus = OBJECT(&s->busses[i]);
|
|
int offset = i < aic->gap ? 1 : 5;
|
|
|
|
if (!object_property_set_link(bus, "controller", OBJECT(s), errp)) {
|
|
return;
|
|
}
|
|
|
|
if (!object_property_set_uint(bus, "bus-id", i, errp)) {
|
|
return;
|
|
}
|
|
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(bus), errp)) {
|
|
return;
|
|
}
|
|
|
|
memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset),
|
|
&s->busses[i].mr);
|
|
}
|
|
|
|
memory_region_init_io(&s->pool_iomem, OBJECT(s), &aspeed_i2c_pool_ops, s,
|
|
"aspeed.i2c-pool", aic->pool_size);
|
|
memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem);
|
|
|
|
if (aic->has_dma) {
|
|
if (!s->dram_mr) {
|
|
error_setg(errp, TYPE_ASPEED_I2C ": 'dram' link not set");
|
|
return;
|
|
}
|
|
|
|
address_space_init(&s->dram_as, s->dram_mr,
|
|
TYPE_ASPEED_I2C "-dma-dram");
|
|
}
|
|
}
|
|
|
|
static Property aspeed_i2c_properties[] = {
|
|
DEFINE_PROP_LINK("dram", AspeedI2CState, dram_mr,
|
|
TYPE_MEMORY_REGION, MemoryRegion *),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void aspeed_i2c_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->vmsd = &aspeed_i2c_vmstate;
|
|
dc->reset = aspeed_i2c_reset;
|
|
device_class_set_props(dc, aspeed_i2c_properties);
|
|
dc->realize = aspeed_i2c_realize;
|
|
dc->desc = "Aspeed I2C Controller";
|
|
}
|
|
|
|
static const TypeInfo aspeed_i2c_info = {
|
|
.name = TYPE_ASPEED_I2C,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_init = aspeed_i2c_instance_init,
|
|
.instance_size = sizeof(AspeedI2CState),
|
|
.class_init = aspeed_i2c_class_init,
|
|
.class_size = sizeof(AspeedI2CClass),
|
|
.abstract = true,
|
|
};
|
|
|
|
static void aspeed_i2c_bus_reset(DeviceState *dev)
|
|
{
|
|
AspeedI2CBus *s = ASPEED_I2C_BUS(dev);
|
|
|
|
memset(s->regs, 0, sizeof(s->regs));
|
|
i2c_end_transfer(s->bus);
|
|
}
|
|
|
|
static void aspeed_i2c_bus_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
AspeedI2CBus *s = ASPEED_I2C_BUS(dev);
|
|
AspeedI2CClass *aic;
|
|
g_autofree char *name = g_strdup_printf(TYPE_ASPEED_I2C_BUS ".%d", s->id);
|
|
|
|
if (!s->controller) {
|
|
error_setg(errp, TYPE_ASPEED_I2C_BUS ": 'controller' link not set");
|
|
return;
|
|
}
|
|
|
|
aic = ASPEED_I2C_GET_CLASS(s->controller);
|
|
|
|
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
|
|
|
|
s->bus = i2c_init_bus(dev, name);
|
|
|
|
memory_region_init_io(&s->mr, OBJECT(s), &aspeed_i2c_bus_ops,
|
|
s, name, aic->reg_size);
|
|
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr);
|
|
}
|
|
|
|
static Property aspeed_i2c_bus_properties[] = {
|
|
DEFINE_PROP_UINT8("bus-id", AspeedI2CBus, id, 0),
|
|
DEFINE_PROP_LINK("controller", AspeedI2CBus, controller, TYPE_ASPEED_I2C,
|
|
AspeedI2CState *),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void aspeed_i2c_bus_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->desc = "Aspeed I2C Bus";
|
|
dc->realize = aspeed_i2c_bus_realize;
|
|
dc->reset = aspeed_i2c_bus_reset;
|
|
device_class_set_props(dc, aspeed_i2c_bus_properties);
|
|
}
|
|
|
|
static const TypeInfo aspeed_i2c_bus_info = {
|
|
.name = TYPE_ASPEED_I2C_BUS,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(AspeedI2CBus),
|
|
.class_init = aspeed_i2c_bus_class_init,
|
|
};
|
|
|
|
static qemu_irq aspeed_2400_i2c_bus_get_irq(AspeedI2CBus *bus)
|
|
{
|
|
return bus->controller->irq;
|
|
}
|
|
|
|
static uint8_t *aspeed_2400_i2c_bus_pool_base(AspeedI2CBus *bus)
|
|
{
|
|
uint8_t *pool_page =
|
|
&bus->controller->pool[ARRAY_FIELD_EX32(bus->regs, I2CD_FUN_CTRL,
|
|
POOL_PAGE_SEL) * 0x100];
|
|
|
|
return &pool_page[ARRAY_FIELD_EX32(bus->regs, I2CD_POOL_CTRL, OFFSET)];
|
|
}
|
|
|
|
static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2400 I2C Controller";
|
|
|
|
aic->num_busses = 14;
|
|
aic->reg_size = 0x40;
|
|
aic->gap = 7;
|
|
aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq;
|
|
aic->pool_size = 0x800;
|
|
aic->pool_base = 0x800;
|
|
aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2400_i2c_info = {
|
|
.name = TYPE_ASPEED_2400_I2C,
|
|
.parent = TYPE_ASPEED_I2C,
|
|
.class_init = aspeed_2400_i2c_class_init,
|
|
};
|
|
|
|
static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus)
|
|
{
|
|
return bus->controller->irq;
|
|
}
|
|
|
|
static uint8_t *aspeed_2500_i2c_bus_pool_base(AspeedI2CBus *bus)
|
|
{
|
|
return &bus->controller->pool[bus->id * 0x10];
|
|
}
|
|
|
|
static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2500 I2C Controller";
|
|
|
|
aic->num_busses = 14;
|
|
aic->reg_size = 0x40;
|
|
aic->gap = 7;
|
|
aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq;
|
|
aic->pool_size = 0x100;
|
|
aic->pool_base = 0x200;
|
|
aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
|
|
aic->check_sram = true;
|
|
aic->has_dma = true;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2500_i2c_info = {
|
|
.name = TYPE_ASPEED_2500_I2C,
|
|
.parent = TYPE_ASPEED_I2C,
|
|
.class_init = aspeed_2500_i2c_class_init,
|
|
};
|
|
|
|
static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus)
|
|
{
|
|
return bus->irq;
|
|
}
|
|
|
|
static uint8_t *aspeed_2600_i2c_bus_pool_base(AspeedI2CBus *bus)
|
|
{
|
|
return &bus->controller->pool[bus->id * 0x20];
|
|
}
|
|
|
|
static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2600 I2C Controller";
|
|
|
|
aic->num_busses = 16;
|
|
aic->reg_size = 0x80;
|
|
aic->gap = -1; /* no gap */
|
|
aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq;
|
|
aic->pool_size = 0x200;
|
|
aic->pool_base = 0xC00;
|
|
aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
|
|
aic->has_dma = true;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2600_i2c_info = {
|
|
.name = TYPE_ASPEED_2600_I2C,
|
|
.parent = TYPE_ASPEED_I2C,
|
|
.class_init = aspeed_2600_i2c_class_init,
|
|
};
|
|
|
|
static void aspeed_1030_i2c_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 1030 I2C Controller";
|
|
|
|
aic->num_busses = 14;
|
|
aic->reg_size = 0x80;
|
|
aic->gap = -1; /* no gap */
|
|
aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq;
|
|
aic->pool_size = 0x200;
|
|
aic->pool_base = 0xC00;
|
|
aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
|
|
aic->has_dma = true;
|
|
}
|
|
|
|
static const TypeInfo aspeed_1030_i2c_info = {
|
|
.name = TYPE_ASPEED_1030_I2C,
|
|
.parent = TYPE_ASPEED_I2C,
|
|
.class_init = aspeed_1030_i2c_class_init,
|
|
};
|
|
|
|
static void aspeed_i2c_register_types(void)
|
|
{
|
|
type_register_static(&aspeed_i2c_bus_info);
|
|
type_register_static(&aspeed_i2c_info);
|
|
type_register_static(&aspeed_2400_i2c_info);
|
|
type_register_static(&aspeed_2500_i2c_info);
|
|
type_register_static(&aspeed_2600_i2c_info);
|
|
type_register_static(&aspeed_1030_i2c_info);
|
|
}
|
|
|
|
type_init(aspeed_i2c_register_types)
|
|
|
|
|
|
I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr)
|
|
{
|
|
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
|
|
I2CBus *bus = NULL;
|
|
|
|
if (busnr >= 0 && busnr < aic->num_busses) {
|
|
bus = s->busses[busnr].bus;
|
|
}
|
|
|
|
return bus;
|
|
}
|