Shannon Zhao d7c2e2db28 hw/arm/virt: Enable dynamic generation of ACPI v5.1 tables ...

Initialize VirtGuestInfoState and register a machine_init_done notify to
call virt_acpi_build().

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-25-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

2015-05-29 11:28:59 +01:00

..

allwinner-a10.c

hw: Mark device misusing nd_table[] FIXME

2015-04-02 15:30:32 +02:00

armv7m.c

target_arm: Parameterise the irq lines for armv7m_init

2015-02-05 13:37:21 +00:00

boot.c

Switch non-CPU callers from ld/st*_phys to address_space_ld/st*

2015-04-26 16:49:24 +01:00

collie.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

cubieboard.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

digic_boards.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

digic.c

hw/arm/digic: add UART support

2013-12-17 20:12:51 +00:00

exynos4_boards.c

machine: Conversion of QEMUMachineInitArgs to MachineState

2014-05-28 17:35:01 +02:00

exynos4210.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

gumstix.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

highbank.c

hw/arm/highbank.c: Wire FIQ between CPU <> GIC

2015-05-12 11:57:19 +01:00

integratorcp.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

kzm.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

mainstone.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

Makefile.objs

hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM

2015-05-29 11:28:54 +01:00

musicpal.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

netduino2.c

netduino2: Add the Netduino 2 Machine

2015-03-11 13:21:06 +00:00

nseries.c

hw/arm/nseries: convert ffs(3) to ctz32()

2015-04-28 15:36:08 +02:00

omap1.c

Convert ffs() != 0 callers to ctz32()

2015-04-28 15:36:08 +02:00

omap2.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

omap_sx1.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

palm.c

memory: add parameter errp to memory_region_init_ram

2014-09-09 13:41:43 +02:00

pxa2xx_gpio.c

Convert (ffs(val) - 1) to ctz32(val)

2015-04-28 15:36:08 +02:00

pxa2xx_pic.c

savevm: Remove all the unneeded version_minimum_id_old (arm)

2014-05-13 16:09:35 +01:00

pxa2xx.c

target-arm: rename c1_coproc to cpacr_el1

2015-04-26 16:49:25 +01:00

realview.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

spitz.c

sysbus: Make devices picking up backends unavailable with -device

2015-04-02 15:30:44 +02:00

stellaris.c

target_arm: Parameterise the irq lines for armv7m_init

2015-02-05 13:37:21 +00:00

stm32f205_soc.c

stm32f205: Add the stm32f205 SoC

2015-03-11 13:21:06 +00:00

strongarm.c

Convert (ffs(val) - 1) to ctz32(val)

2015-04-28 15:36:08 +02:00

strongarm.h

…

tosa.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

versatilepb.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

vexpress.c

hw/arm/vexpress.c: Wire FIQ between CPU <> GIC

2015-05-12 11:57:18 +01:00

virt-acpi-build.c

hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table

2015-05-29 11:28:59 +01:00

virt.c

hw/arm/virt: Enable dynamic generation of ACPI v5.1 tables

2015-05-29 11:28:59 +01:00

xilinx_zynq.c

arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory

2015-04-08 17:30:36 +01:00

xlnx-ep108.c

arm: xlnx-ep108: Add bootloading

2015-05-18 16:41:14 +01:00

xlnx-zynqmp.c

arm: xlnx-zynqmp: Add UART support

2015-05-18 16:41:13 +01:00

z2.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00