xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-28 14:00:44 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
d0ccb3922d
xemu/hw/misc/mac_via.c
Eduardo Habkost 9db70dac85 mos6522: Rename QOM macros 
Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02 07:29:25 -04:00

1271 lines
42 KiB
C
Raw Blame History

/*
* QEMU m68k Macintosh VIA device support
*
* Copyright (c) 2011-2018 Laurent Vivier
* Copyright (c) 2018 Mark Cave-Ayland
*
* Some parts from hw/misc/macio/cuda.c
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
*
* some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "migration/vmstate.h"
#include "hw/sysbus.h"
#include "hw/irq.h"
#include "qemu/timer.h"
#include "hw/misc/mac_via.h"
#include "hw/misc/mos6522.h"
#include "hw/input/adb.h"
#include "sysemu/runstate.h"
#include "qapi/error.h"
#include "qemu/cutils.h"
#include "hw/qdev-properties.h"
#include "sysemu/block-backend.h"
#include "trace.h"
#include "qemu/log.h"
/*
* VIAs: There are two in every machine,
*/
#define VIA_SIZE (0x2000)
/*
* Not all of these are true post MacII I think.
* CSA: probably the ones CHRP marks as 'unused' change purposes
* when the IWM becomes the SWIM.
* http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
* ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
*
* also, http://developer.apple.com/technotes/hw/hw_09.html claims the
* following changes for IIfx:
* VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
* Also, "All of the functionality of VIA2 has been moved to other chips".
*/
#define VIA1A_vSccWrReq 0x80 /*
* SCC write. (input)
* [CHRP] SCC WREQ: Reflects the state of the
* Wait/Request pins from the SCC.
* [Macintosh Family Hardware]
* as CHRP on SE/30,II,IIx,IIcx,IIci.
* on IIfx, "0 means an active request"
*/
#define VIA1A_vRev8 0x40 /*
* Revision 8 board ???
* [CHRP] En WaitReqB: Lets the WaitReq_L
* signal from port B of the SCC appear on
* the PA7 input pin. Output.
* [Macintosh Family] On the SE/30, this
* is the bit to flip screen buffers.
* 0=alternate, 1=main.
* on II,IIx,IIcx,IIci,IIfx this is a bit
* for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
*/
#define VIA1A_vHeadSel 0x20 /*
* Head select for IWM.
* [CHRP] unused.
* [Macintosh Family] "Floppy disk
* state-control line SEL" on all but IIfx
*/
#define VIA1A_vOverlay 0x10 /*
* [Macintosh Family] On SE/30,II,IIx,IIcx
* this bit enables the "Overlay" address
* map in the address decoders as it is on
* reset for mapping the ROM over the reset
* vector. 1=use overlay map.
* On the IIci,IIfx it is another bit of the
* CPU ID: 0=normal IIci, 1=IIci with parity
* feature or IIfx.
* [CHRP] En WaitReqA: Lets the WaitReq_L
* signal from port A of the SCC appear
* on the PA7 input pin (CHRP). Output.
* [MkLinux] "Drive Select"
* (with 0x20 being 'disk head select')
*/
#define VIA1A_vSync 0x08 /*
* [CHRP] Sync Modem: modem clock select:
* 1: select the external serial clock to
* drive the SCC's /RTxCA pin.
* 0: Select the 3.6864MHz clock to drive
* the SCC cell.
* [Macintosh Family] Correct on all but IIfx
*/
/*
* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
* on Macs which had the PWM sound hardware. Reserved on newer models.
* On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
* bit 2: 1=IIci, 0=IIfx
* bit 1: 1 on both IIci and IIfx.
* MkLinux sez bit 0 is 'burnin flag' in this case.
* CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
* inputs, these bits will read 0.
*/
#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
/*
* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
* CHRP offers no info.
*/
#define VIA1B_vSound 0x80 /*
* Sound enable (for compatibility with
* PWM hardware) 0=enabled.
* Also, on IIci w/parity, shows parity error
* 0=error, 1=OK.
*/
#define VIA1B_vMystery 0x40 /*
* On IIci, parity enable. 0=enabled,1=disabled
* On SE/30, vertical sync interrupt enable.
* 0=enabled. This vSync interrupt shows up
* as a slot $E interrupt.
*/
#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
/*
* VIA2 A register is the interrupt lines raised off the nubus
* slots.
* The below info is from 'Macintosh Family Hardware.'
* MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
* It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
* defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
* Perhaps OSS uses vRAM1 and vRAM2 for ADB.
*/
#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
/*
* RAM size bits decoded as follows:
* bit1 bit0 size of ICs in bank A
* 0 0 256 kbit
* 0 1 1 Mbit
* 1 0 4 Mbit
* 1 1 16 Mbit
*/
/*
* Register B has the fun stuff in it
*/
#define VIA2B_vVBL 0x80 /*
* VBL output to VIA1 (60.15Hz) driven by
* timer T1.
* on IIci, parity test: 0=test mode.
* [MkLinux] RBV_PARODD: 1=odd,0=even.
*/
#define VIA2B_vSndJck 0x40 /*
* External sound jack status.
* 0=plug is inserted. On SE/30, always 0
*/
#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
#define VIA2B_vMode32 0x08 /*
* 24/32bit switch - doubles as cache flush
* on II, AMU/PMMU control.
* if AMU, 0=24bit to 32bit translation
* if PMMU, 1=PMMU is accessing page table.
* on SE/30 tied low.
* on IIx,IIcx,IIfx, unused.
* on IIci/RBV, cache control. 0=flush cache.
*/
#define VIA2B_vPower 0x04 /*
* Power off, 0=shut off power.
* on SE/30 this signal sent to PDS card.
*/
#define VIA2B_vBusLk 0x02 /*
* Lock NuBus transactions, 0=locked.
* on SE/30 sent to PDS card.
*/
#define VIA2B_vCDis 0x01 /*
* Cache control. On IIci, 1=disable cache card
* on others, 0=disable processor's instruction
* and data caches.
*/
/* interrupt flags */
#define IRQ_SET 0x80
/* common */
#define VIA_IRQ_TIMER1 0x40
#define VIA_IRQ_TIMER2 0x20
/*
* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
* Another example of a valid function that has no ROM support is the use
* of the alternate video page for page-flipping animation. Since there
* is no ROM call to flip pages, it is necessary to go play with the
* right bit in the VIA chip (6522 Versatile Interface Adapter).
* [CSA: don't know which one this is, but it's one of 'em!]
*/
/*
* 6522 registers - see databook.
* CSA: Assignments for VIA1 confirmed from CHRP spec.
*/
/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
/* Note: 15 VIA regs, 8 RBV regs */
#define vBufB 0x0000 /* [VIA/RBV] Register B */
#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
#define vSR 0x1400 /* [VIA only] Shift register. */
#define vACR 0x1600 /* [VIA only] Auxilary control register. */
#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
/*
* CHRP sez never ever to *write* this.
* Mac family says never to *change* this.
* In fact we need to initialize it once at start.
*/
#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
/* from linux 2.6 drivers/macintosh/via-macii.c */
/* Bits in ACR */
#define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */
#define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */
#define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */
/*
* Apple Macintosh Family Hardware Refenece
* Table 19-10 ADB transaction states
*/
#define ADB_STATE_NEW 0
#define ADB_STATE_EVEN 1
#define ADB_STATE_ODD 2
#define ADB_STATE_IDLE 3
#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
#define VIA1B_vADB_StateShift 4
#define VIA_TIMER_FREQ (783360)
#define VIA_ADB_POLL_FREQ 50 /* XXX: not real */
/* VIA returns time offset from Jan 1, 1904, not 1970 */
#define RTC_OFFSET 2082844800
enum {
REG_0,
REG_1,
REG_2,
REG_3,
REG_TEST,
REG_WPROTECT,
REG_PRAM_ADDR,
REG_PRAM_ADDR_LAST = REG_PRAM_ADDR + 19,
REG_PRAM_SECT,
REG_PRAM_SECT_LAST = REG_PRAM_SECT + 7,
REG_INVALID,
REG_EMPTY = 0xff,
};
static void via1_VBL_update(MOS6522Q800VIA1State *v1s)
{
MOS6522State *s = MOS6522(v1s);
/* 60 Hz irq */
v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) /
16630 * 16630;
if (s->ier & VIA1_IRQ_VBLANK) {
timer_mod(v1s->VBL_timer, v1s->next_VBL);
} else {
timer_del(v1s->VBL_timer);
}
}
static void via1_one_second_update(MOS6522Q800VIA1State *v1s)
{
MOS6522State *s = MOS6522(v1s);
v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) /
1000 * 1000;
if (s->ier & VIA1_IRQ_ONE_SECOND) {
timer_mod(v1s->one_second_timer, v1s->next_second);
} else {
timer_del(v1s->one_second_timer);
}
}
static void via1_VBL(void *opaque)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(s);
s->ifr |= VIA1_IRQ_VBLANK;
mdc->update_irq(s);
via1_VBL_update(v1s);
}
static void via1_one_second(void *opaque)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(s);
s->ifr |= VIA1_IRQ_ONE_SECOND;
mdc->update_irq(s);
via1_one_second_update(v1s);
}
static void via1_irq_request(void *opaque, int irq, int level)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(s);
if (level) {
s->ifr |= 1 << irq;
} else {
s->ifr &= ~(1 << irq);
}
mdc->update_irq(s);
}
static void via2_irq_request(void *opaque, int irq, int level)
{
MOS6522Q800VIA2State *v2s = opaque;
MOS6522State *s = MOS6522(v2s);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(s);
if (level) {
s->ifr |= 1 << irq;
} else {
s->ifr &= ~(1 << irq);
}
mdc->update_irq(s);
}
static void pram_update(MacVIAState *m)
{
if (m->blk) {
if (blk_pwrite(m->blk, 0, m->mos6522_via1.PRAM,
sizeof(m->mos6522_via1.PRAM), 0) < 0) {
qemu_log("pram_update: cannot write to file\n");
}
}
}
/*
* RTC Commands
*
* Command byte Register addressed by the command
*
* z0000001 Seconds register 0 (lowest-order byte)
* z0000101 Seconds register 1
* z0001001 Seconds register 2
* z0001101 Seconds register 3 (highest-order byte)
* 00110001 Test register (write-only)
* 00110101 Write-Protect Register (write-only)
* z010aa01 RAM address 100aa ($10-$13) (first 20 bytes only)
* z1aaaa01 RAM address 0aaaa ($00-$0F) (first 20 bytes only)
* z0111aaa Extended memory designator and sector number
*
* For a read request, z=1, for a write z=0
* The letter a indicates bits whose value depend on what parameter
* RAM byte you want to address
*/
static int via1_rtc_compact_cmd(uint8_t value)
{
uint8_t read = value & 0x80;
value &= 0x7f;
/* the last 2 bits of a command byte must always be 0b01 ... */
if ((value & 0x78) == 0x38) {
/* except for the extended memory designator */
return read | (REG_PRAM_SECT + (value & 0x07));
}
if ((value & 0x03) == 0x01) {
value >>= 2;
if ((value & 0x1c) == 0) {
/* seconds registers */
return read | (REG_0 + (value & 0x03));
} else if ((value == 0x0c) && !read) {
return REG_TEST;
} else if ((value == 0x0d) && !read) {
return REG_WPROTECT;
} else if ((value & 0x1c) == 0x08) {
/* RAM address 0x10 to 0x13 */
return read | (REG_PRAM_ADDR + 0x10 + (value & 0x03));
} else if ((value & 0x43) == 0x41) {
/* RAM address 0x00 to 0x0f */
return read | (REG_PRAM_ADDR + (value & 0x0f));
}
}
return REG_INVALID;
}
static void via1_rtc_update(MacVIAState *m)
{
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
MOS6522State *s = MOS6522(v1s);
int cmd, sector, addr;
uint32_t time;
if (s->b & VIA1B_vRTCEnb) {
return;
}
if (s->dirb & VIA1B_vRTCData) {
/* send bits to the RTC */
if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
m->data_out <<= 1;
m->data_out |= s->b & VIA1B_vRTCData;
m->data_out_cnt++;
}
trace_via1_rtc_update_data_out(m->data_out_cnt, m->data_out);
} else {
trace_via1_rtc_update_data_in(m->data_in_cnt, m->data_in);
/* receive bits from the RTC */
if ((v1s->last_b & VIA1B_vRTCClk) &&
!(s->b & VIA1B_vRTCClk) &&
m->data_in_cnt) {
s->b = (s->b & ~VIA1B_vRTCData) |
((m->data_in >> 7) & VIA1B_vRTCData);
m->data_in <<= 1;
m->data_in_cnt--;
}
return;
}
if (m->data_out_cnt != 8) {
return;
}
m->data_out_cnt = 0;
trace_via1_rtc_internal_status(m->cmd, m->alt, m->data_out);
/* first byte: it's a command */
if (m->cmd == REG_EMPTY) {
cmd = via1_rtc_compact_cmd(m->data_out);
trace_via1_rtc_internal_cmd(cmd);
if (cmd == REG_INVALID) {
trace_via1_rtc_cmd_invalid(m->data_out);
return;
}
if (cmd & 0x80) { /* this is a read command */
switch (cmd & 0x7f) {
case REG_0...REG_3: /* seconds registers */
/*
* register 0 is lowest-order byte
* register 3 is highest-order byte
*/
time = m->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)
/ NANOSECONDS_PER_SECOND);
trace_via1_rtc_internal_time(time);
m->data_in = (time >> ((cmd & 0x03) << 3)) & 0xff;
m->data_in_cnt = 8;
trace_via1_rtc_cmd_seconds_read((cmd & 0x7f) - REG_0,
m->data_in);
break;
case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST:
/* PRAM address 0x00 -> 0x13 */
m->data_in = v1s->PRAM[(cmd & 0x7f) - REG_PRAM_ADDR];
m->data_in_cnt = 8;
trace_via1_rtc_cmd_pram_read((cmd & 0x7f) - REG_PRAM_ADDR,
m->data_in);
break;
case REG_PRAM_SECT...REG_PRAM_SECT_LAST:
/*
* extended memory designator and sector number
* the only two-byte read command
*/
trace_via1_rtc_internal_set_cmd(cmd);
m->cmd = cmd;
break;
default:
g_assert_not_reached();
break;
}
return;
}
/* this is a write command, needs a parameter */
if (cmd == REG_WPROTECT || !m->wprotect) {
trace_via1_rtc_internal_set_cmd(cmd);
m->cmd = cmd;
} else {
trace_via1_rtc_internal_ignore_cmd(cmd);
}
return;
}
/* second byte: it's a parameter */
if (m->alt == REG_EMPTY) {
switch (m->cmd & 0x7f) {
case REG_0...REG_3: /* seconds register */
/* FIXME */
trace_via1_rtc_cmd_seconds_write(m->cmd - REG_0, m->data_out);
m->cmd = REG_EMPTY;
break;
case REG_TEST:
/* device control: nothing to do */
trace_via1_rtc_cmd_test_write(m->data_out);
m->cmd = REG_EMPTY;
break;
case REG_WPROTECT:
/* Write Protect register */
trace_via1_rtc_cmd_wprotect_write(m->data_out);
m->wprotect = !!(m->data_out & 0x80);
m->cmd = REG_EMPTY;
break;
case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST:
/* PRAM address 0x00 -> 0x13 */
trace_via1_rtc_cmd_pram_write(m->cmd - REG_PRAM_ADDR, m->data_out);
v1s->PRAM[m->cmd - REG_PRAM_ADDR] = m->data_out;
pram_update(m);
m->cmd = REG_EMPTY;
break;
case REG_PRAM_SECT...REG_PRAM_SECT_LAST:
addr = (m->data_out >> 2) & 0x1f;
sector = (m->cmd & 0x7f) - REG_PRAM_SECT;
if (m->cmd & 0x80) {
/* it's a read */
m->data_in = v1s->PRAM[sector * 32 + addr];
m->data_in_cnt = 8;
trace_via1_rtc_cmd_pram_sect_read(sector, addr,
sector * 32 + addr,
m->data_in);
m->cmd = REG_EMPTY;
} else {
/* it's a write, we need one more parameter */
trace_via1_rtc_internal_set_alt(addr, sector, addr);
m->alt = addr;
}
break;
default:
g_assert_not_reached();
break;
}
return;
}
/* third byte: it's the data of a REG_PRAM_SECT write */
g_assert(REG_PRAM_SECT <= m->cmd && m->cmd <= REG_PRAM_SECT_LAST);
sector = m->cmd - REG_PRAM_SECT;
v1s->PRAM[sector * 32 + m->alt] = m->data_out;
pram_update(m);
trace_via1_rtc_cmd_pram_sect_write(sector, m->alt, sector * 32 + m->alt,
m->data_out);
m->alt = REG_EMPTY;
m->cmd = REG_EMPTY;
}
static void adb_via_poll(void *opaque)
{
MacVIAState *m = opaque;
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
MOS6522State *s = MOS6522(v1s);
ADBBusState *adb_bus = &m->adb_bus;
uint8_t obuf[9];
uint8_t *data = &s->sr;
int olen;
uint16_t pending;
/*
* Setting vADBInt below indicates that an autopoll reply has been
* received, however we must block autopoll until the point where
* the entire reply has been read back to the host
*/
adb_autopoll_block(adb_bus);
m->adb_data_in_index = 0;
m->adb_data_out_index = 0;
olen = adb_poll(adb_bus, obuf, adb_bus->autopoll_mask);
if (olen > 0) {
/* Autopoll response */
*data = obuf[0];
olen--;
memcpy(m->adb_data_in, &obuf[1], olen);
m->adb_data_in_size = olen;
s->b &= ~VIA1B_vADBInt;
qemu_irq_raise(m->adb_data_ready);
} else if (olen < 0) {
/* Bus timeout (device does not exist) */
*data = 0xff;
s->b |= VIA1B_vADBInt;
adb_autopoll_unblock(adb_bus);
} else {
pending = adb_bus->pending & ~(1 << (m->adb_autopoll_cmd >> 4));
if (pending) {
/*
* Bus timeout (device exists but another device has data). Block
* autopoll so the OS can read out the first EVEN and first ODD
* byte to determine bus timeout and SRQ status
*/
*data = m->adb_autopoll_cmd;
s->b &= ~VIA1B_vADBInt;
obuf[0] = 0xff;
obuf[1] = 0xff;
olen = 2;
memcpy(m->adb_data_in, obuf, olen);
m->adb_data_in_size = olen;
qemu_irq_raise(m->adb_data_ready);
} else {
/* Bus timeout (device exists but no other device has data) */
*data = 0;
s->b |= VIA1B_vADBInt;
adb_autopoll_unblock(adb_bus);
}
}
trace_via1_adb_poll(*data, (s->b & VIA1B_vADBInt) ? "+" : "-",
adb_bus->status, m->adb_data_in_index, olen);
}
static int adb_via_send_len(uint8_t data)
{
/* Determine the send length from the given ADB command */
uint8_t cmd = data & 0xc;
uint8_t reg = data & 0x3;
switch (cmd) {
case 0x8:
/* Listen command */
switch (reg) {
case 2:
/* Register 2 is only used for the keyboard */
return 3;
case 3:
/*
* Fortunately our devices only implement writes
* to register 3 which is fixed at 2 bytes
*/
return 3;
default:
qemu_log_mask(LOG_UNIMP, "ADB unknown length for register %d\n",
reg);
return 1;
}
default:
/* Talk, BusReset */
return 1;
}
}
static void adb_via_send(MacVIAState *s, int state, uint8_t data)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
MOS6522State *ms = MOS6522(v1s);
ADBBusState *adb_bus = &s->adb_bus;
uint16_t autopoll_mask;
switch (state) {
case ADB_STATE_NEW:
/*
* Command byte: vADBInt tells host autopoll data already present
* in VIA shift register and ADB transceiver
*/
adb_autopoll_block(adb_bus);
if (adb_bus->status & ADB_STATUS_POLLREPLY) {
/* Tell the host the existing data is from autopoll */
ms->b &= ~VIA1B_vADBInt;
} else {
ms->b |= VIA1B_vADBInt;
s->adb_data_out_index = 0;
s->adb_data_out[s->adb_data_out_index++] = data;
}
trace_via1_adb_send(" NEW", data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
qemu_irq_raise(s->adb_data_ready);
break;
case ADB_STATE_EVEN:
case ADB_STATE_ODD:
ms->b |= VIA1B_vADBInt;
s->adb_data_out[s->adb_data_out_index++] = data;
trace_via1_adb_send(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
qemu_irq_raise(s->adb_data_ready);
break;
case ADB_STATE_IDLE:
return;
}
/* If the command is complete, execute it */
if (s->adb_data_out_index == adb_via_send_len(s->adb_data_out[0])) {
s->adb_data_in_size = adb_request(adb_bus, s->adb_data_in,
s->adb_data_out,
s->adb_data_out_index);
s->adb_data_in_index = 0;
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
/*
* Bus timeout (but allow first EVEN and ODD byte to indicate
* timeout via vADBInt and SRQ status)
*/
s->adb_data_in[0] = 0xff;
s->adb_data_in[1] = 0xff;
s->adb_data_in_size = 2;
}
/*
* If last command is TALK, store it for use by autopoll and adjust
* the autopoll mask accordingly
*/
if ((s->adb_data_out[0] & 0xc) == 0xc) {
s->adb_autopoll_cmd = s->adb_data_out[0];
autopoll_mask = 1 << (s->adb_autopoll_cmd >> 4);
adb_set_autopoll_mask(adb_bus, autopoll_mask);
}
}
}
static void adb_via_receive(MacVIAState *s, int state, uint8_t *data)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
MOS6522State *ms = MOS6522(v1s);
ADBBusState *adb_bus = &s->adb_bus;
uint16_t pending;
switch (state) {
case ADB_STATE_NEW:
ms->b |= VIA1B_vADBInt;
return;
case ADB_STATE_IDLE:
/*
* Since adb_request() will have already consumed the data from the
* device, we must detect this extra state change and re-inject the
* reponse as either a "fake" autopoll reply or bus timeout
* accordingly
*/
if (s->adb_data_in_index == 0) {
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
*data = 0xff;
ms->b |= VIA1B_vADBInt;
qemu_irq_raise(s->adb_data_ready);
} else if (s->adb_data_in_size > 0) {
adb_bus->status = ADB_STATUS_POLLREPLY;
*data = s->adb_autopoll_cmd;
ms->b &= ~VIA1B_vADBInt;
qemu_irq_raise(s->adb_data_ready);
}
} else {
ms->b |= VIA1B_vADBInt;
adb_autopoll_unblock(adb_bus);
}
trace_via1_adb_receive("IDLE", *data,
(ms->b & VIA1B_vADBInt) ? "+" : "-", adb_bus->status,
s->adb_data_in_index, s->adb_data_in_size);
break;
case ADB_STATE_EVEN:
case ADB_STATE_ODD:
switch (s->adb_data_in_index) {
case 0:
/* First EVEN byte: vADBInt indicates bus timeout */
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
adb_bus->status, s->adb_data_in_index,
s->adb_data_in_size);
*data = s->adb_data_in[s->adb_data_in_index++];
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
ms->b &= ~VIA1B_vADBInt;
} else {
ms->b |= VIA1B_vADBInt;
}
break;
case 1:
/* First ODD byte: vADBInt indicates SRQ */
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
adb_bus->status, s->adb_data_in_index,
s->adb_data_in_size);
*data = s->adb_data_in[s->adb_data_in_index++];
pending = adb_bus->pending & ~(1 << (s->adb_autopoll_cmd >> 4));
if (pending) {
ms->b &= ~VIA1B_vADBInt;
} else {
ms->b |= VIA1B_vADBInt;
}
break;
default:
/*
* Otherwise vADBInt indicates end of data. Note that Linux
* specifically checks for the sequence 0x0 0xff to confirm the
* end of the poll reply, so provide these extra bytes below to
* keep it happy
*/
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
adb_bus->status, s->adb_data_in_index,
s->adb_data_in_size);
if (s->adb_data_in_index < s->adb_data_in_size) {
/* Next data byte */
*data = s->adb_data_in[s->adb_data_in_index++];
ms->b |= VIA1B_vADBInt;
} else if (s->adb_data_in_index == s->adb_data_in_size) {
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
/* Bus timeout (no more data) */
*data = 0xff;
} else {
/* Return 0x0 after reply */
*data = 0;
}
s->adb_data_in_index++;
ms->b &= ~VIA1B_vADBInt;
} else {
/* Bus timeout (no more data) */
*data = 0xff;
ms->b &= ~VIA1B_vADBInt;
adb_bus->status = 0;
adb_autopoll_unblock(adb_bus);
}
break;
}
qemu_irq_raise(s->adb_data_ready);
break;
}
}
static void via1_adb_update(MacVIAState *m)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
MOS6522State *s = MOS6522(v1s);
int oldstate, state;
oldstate = (v1s->last_b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
if (state != oldstate) {
if (s->acr & VIA1ACR_vShiftOut) {
/* output mode */
adb_via_send(m, state, s->sr);
} else {
/* input mode */
adb_via_receive(m, state, &s->sr);
}
}
}
static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
MOS6522State *ms = MOS6522(s);
int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
/*
* If IRQs are disabled, timers are disabled, but we need to update
* VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR
*/
if (now >= s->next_VBL) {
ms->ifr |= VIA1_IRQ_VBLANK;
via1_VBL_update(s);
}
if (now >= s->next_second) {
ms->ifr |= VIA1_IRQ_ONE_SECOND;
via1_one_second_update(s);
}
addr = (addr >> 9) & 0xf;
return mos6522_read(ms, addr, size);
}
static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque);
MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
MOS6522State *ms = MOS6522(v1s);
addr = (addr >> 9) & 0xf;
mos6522_write(ms, addr, val, size);
switch (addr) {
case VIA_REG_B:
via1_rtc_update(m);
via1_adb_update(m);
v1s->last_b = ms->b;
break;
}
via1_one_second_update(v1s);
via1_VBL_update(v1s);
}
static const MemoryRegionOps mos6522_q800_via1_ops = {
.read = mos6522_q800_via1_read,
.write = mos6522_q800_via1_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
MOS6522State *ms = MOS6522(s);
addr = (addr >> 9) & 0xf;
return mos6522_read(ms, addr, size);
}
static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
MOS6522State *ms = MOS6522(s);
addr = (addr >> 9) & 0xf;
mos6522_write(ms, addr, val, size);
}
static const MemoryRegionOps mos6522_q800_via2_ops = {
.read = mos6522_q800_via2_read,
.write = mos6522_q800_via2_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static void mac_via_reset(DeviceState *dev)
{
MacVIAState *m = MAC_VIA(dev);
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
ADBBusState *adb_bus = &m->adb_bus;
adb_set_autopoll_enabled(adb_bus, true);
timer_del(v1s->VBL_timer);
v1s->next_VBL = 0;
timer_del(v1s->one_second_timer);
v1s->next_second = 0;
m->cmd = REG_EMPTY;
m->alt = REG_EMPTY;
}
static void mac_via_realize(DeviceState *dev, Error **errp)
{
MacVIAState *m = MAC_VIA(dev);
MOS6522State *ms;
ADBBusState *adb_bus = &m->adb_bus;
struct tm tm;
int ret;
/* Init VIAs 1 and 2 */
object_initialize_child(OBJECT(dev), "via1", &m->mos6522_via1,
TYPE_MOS6522_Q800_VIA1);
object_initialize_child(OBJECT(dev), "via2", &m->mos6522_via2,
TYPE_MOS6522_Q800_VIA2);
/* Pass through mos6522 output IRQs */
ms = MOS6522(&m->mos6522_via1);
object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms),
SYSBUS_DEVICE_GPIO_IRQ "[0]");
ms = MOS6522(&m->mos6522_via2);
object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms),
SYSBUS_DEVICE_GPIO_IRQ "[0]");
sysbus_realize(SYS_BUS_DEVICE(&m->mos6522_via1), &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&m->mos6522_via2), &error_abort);
/* Pass through mos6522 input IRQs */
qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq");
qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq");
/* VIA 1 */
m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
via1_one_second,
&m->mos6522_via1);
m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL,
&m->mos6522_via1);
qemu_get_timedate(&tm, 0);
m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
adb_register_autopoll_callback(adb_bus, adb_via_poll, m);
m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
VIA1_IRQ_ADB_READY_BIT);
if (m->blk) {
int64_t len = blk_getlength(m->blk);
if (len < 0) {
error_setg_errno(errp, -len,
"could not get length of backing image");
return;
}
ret = blk_set_perm(m->blk,
BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE,
BLK_PERM_ALL, errp);
if (ret < 0) {
return;
}
len = blk_pread(m->blk, 0, m->mos6522_via1.PRAM,
sizeof(m->mos6522_via1.PRAM));
if (len != sizeof(m->mos6522_via1.PRAM)) {
error_setg(errp, "can't read PRAM contents");
return;
}
}
}
static void mac_via_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
MacVIAState *m = MAC_VIA(obj);
/* MMIO */
memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE);
sysbus_init_mmio(sbd, &m->mmio);
memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops,
&m->mos6522_via1, "via1", VIA_SIZE);
memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem);
memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops,
&m->mos6522_via2, "via2", VIA_SIZE);
memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem);
/* ADB */
qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus),
TYPE_ADB_BUS, DEVICE(obj), "adb.0");
}
static void postload_update_cb(void *opaque, int running, RunState state)
{
MacVIAState *m = MAC_VIA(opaque);
qemu_del_vm_change_state_handler(m->vmstate);
m->vmstate = NULL;
pram_update(m);
}
static int mac_via_post_load(void *opaque, int version_id)
{
MacVIAState *m = MAC_VIA(opaque);
if (m->blk) {
m->vmstate = qemu_add_vm_change_state_handler(postload_update_cb,
m);
}
return 0;
}
static const VMStateDescription vmstate_mac_via = {
.name = "mac-via",
.version_id = 2,
.minimum_version_id = 2,
.post_load = mac_via_post_load,
.fields = (VMStateField[]) {
/* VIAs */
VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522,
MOS6522State),
VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState),
VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState),
VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState),
VMSTATE_INT64(mos6522_via1.next_second, MacVIAState),
VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState),
VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState),
VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522,
MOS6522State),
/* RTC */
VMSTATE_UINT32(tick_offset, MacVIAState),
VMSTATE_UINT8(data_out, MacVIAState),
VMSTATE_INT32(data_out_cnt, MacVIAState),
VMSTATE_UINT8(data_in, MacVIAState),
VMSTATE_UINT8(data_in_cnt, MacVIAState),
VMSTATE_UINT8(cmd, MacVIAState),
VMSTATE_INT32(wprotect, MacVIAState),
VMSTATE_INT32(alt, MacVIAState),
/* ADB */
VMSTATE_INT32(adb_data_in_size, MacVIAState),
VMSTATE_INT32(adb_data_in_index, MacVIAState),
VMSTATE_INT32(adb_data_out_index, MacVIAState),
VMSTATE_BUFFER(adb_data_in, MacVIAState),
VMSTATE_BUFFER(adb_data_out, MacVIAState),
VMSTATE_UINT8(adb_autopoll_cmd, MacVIAState),
VMSTATE_END_OF_LIST()
}
};
static Property mac_via_properties[] = {
DEFINE_PROP_DRIVE("drive", MacVIAState, blk),
DEFINE_PROP_END_OF_LIST(),
};
static void mac_via_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = mac_via_realize;
dc->reset = mac_via_reset;
dc->vmsd = &vmstate_mac_via;
device_class_set_props(dc, mac_via_properties);
}
static TypeInfo mac_via_info = {
.name = TYPE_MAC_VIA,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(MacVIAState),
.instance_init = mac_via_init,
.class_init = mac_via_class_init,
};
/* VIA 1 */
static void mos6522_q800_via1_reset(DeviceState *dev)
{
MOS6522State *ms = MOS6522(dev);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms);
mdc->parent_reset(dev);
ms->timers[0].frequency = VIA_TIMER_FREQ;
ms->timers[1].frequency = VIA_TIMER_FREQ;
ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb;
}
static void mos6522_q800_via1_init(Object *obj)
{
qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
VIA1_IRQ_NB);
}
static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->reset = mos6522_q800_via1_reset;
}
static const TypeInfo mos6522_q800_via1_type_info = {
.name = TYPE_MOS6522_Q800_VIA1,
.parent = TYPE_MOS6522,
.instance_size = sizeof(MOS6522Q800VIA1State),
.instance_init = mos6522_q800_via1_init,
.class_init = mos6522_q800_via1_class_init,
};
/* VIA 2 */
static void mos6522_q800_via2_portB_write(MOS6522State *s)
{
if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) {
/* shutdown */
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
}
static void mos6522_q800_via2_reset(DeviceState *dev)
{
MOS6522State *ms = MOS6522(dev);
MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms);
mdc->parent_reset(dev);
ms->timers[0].frequency = VIA_TIMER_FREQ;
ms->timers[1].frequency = VIA_TIMER_FREQ;
ms->dirb = 0;
ms->b = 0;
}
static void mos6522_q800_via2_init(Object *obj)
{
qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
VIA2_IRQ_NB);
}
static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
MOS6522DeviceClass *mdc = MOS6522_CLASS(oc);
dc->reset = mos6522_q800_via2_reset;
mdc->portB_write = mos6522_q800_via2_portB_write;
}
static const TypeInfo mos6522_q800_via2_type_info = {
.name = TYPE_MOS6522_Q800_VIA2,
.parent = TYPE_MOS6522,
.instance_size = sizeof(MOS6522Q800VIA2State),
.instance_init = mos6522_q800_via2_init,
.class_init = mos6522_q800_via2_class_init,
};
static void mac_via_register_types(void)
{
type_register_static(&mos6522_q800_via1_type_info);
type_register_static(&mos6522_q800_via2_type_info);
type_register_static(&mac_via_info);
}
type_init(mac_via_register_types);
Reference in New Issue View Git Blame Copy Permalink