mirror of
https://github.com/xemu-project/xemu.git
synced 2024-12-13 14:36:08 +00:00
7f1d87ab0f
SystemTap's dtrace(1) produces the following warning when it encounters "char const" instead of "const char": Warning: /usr/bin/dtrace:trace-dtrace-root.dtrace:66: syntax error near: probe flatview_destroy_rcu Warning: Proceeding as if --no-pyparsing was given. This is a limitation in current SystemTap releases. I have sent a patch upstream to accept "char const" since it is valid C: https://sourceware.org/ml/systemtap/2018-q1/msg00017.html In QEMU we still wish to avoid warnings in the current SystemTap release. It's simple enough to replace "char const" with "const char". I'm not changing the documentation or implementing checks to prevent this from occurring again in the future. The next release of SystemTap will hopefully resolve this issue. Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180201162625.4276-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
113 lines
9.8 KiB
Plaintext
113 lines
9.8 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# hw/block/virtio-blk.c
|
|
virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d"
|
|
virtio_blk_rw_complete(void *vdev, void *req, int ret) "vdev %p req %p ret %d"
|
|
virtio_blk_handle_write(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_handle_read(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_submit_multireq(void *vdev, void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "vdev %p mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d"
|
|
|
|
# hw/block/hd-geometry.c
|
|
hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d"
|
|
hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d"
|
|
|
|
# hw/block/nvme.c
|
|
# nvme traces for successful events
|
|
nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u"
|
|
nvme_irq_pin(void) "pulsing IRQ pin"
|
|
nvme_irq_masked(void) "IRQ is masked"
|
|
nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64""
|
|
nvme_rw(const char *verb, uint32_t blk_count, uint64_t byte_count, uint64_t lba) "%s %"PRIu32" blocks (%"PRIu64" bytes) from LBA %"PRIu64""
|
|
nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
|
|
nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
|
|
nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
|
|
nvme_del_cq(uint16_t cqid) "deleted completion queue, sqid=%"PRIu16""
|
|
nvme_identify_ctrl(void) "identify controller"
|
|
nvme_identify_ns(uint16_t ns) "identify namespace, nsid=%"PRIu16""
|
|
nvme_identify_nslist(uint16_t ns) "identify namespace list, nsid=%"PRIu16""
|
|
nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s"
|
|
nvme_getfeat_numq(int result) "get feature number of queues, result=%d"
|
|
nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d"
|
|
nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64""
|
|
nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64""
|
|
nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64""
|
|
nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64""
|
|
nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
nvme_mmio_start_success(void) "setting controller enable bit succeeded"
|
|
nvme_mmio_stopped(void) "cleared controller enable bit"
|
|
nvme_mmio_shutdown_set(void) "shutdown bit set"
|
|
nvme_mmio_shutdown_cleared(void) "shutdown bit cleared"
|
|
|
|
# nvme traces for error conditions
|
|
nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size"
|
|
nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is null or not page aligned: 0x%"PRIx64""
|
|
nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64""
|
|
nvme_err_invalid_prp2_missing(void) "PRP2 is null and more data to be transferred"
|
|
nvme_err_invalid_field(void) "invalid field"
|
|
nvme_err_invalid_prp(void) "invalid PRP"
|
|
nvme_err_invalid_sgl(void) "invalid SGL"
|
|
nvme_err_invalid_ns(uint32_t ns, uint32_t limit) "invalid namespace %u not within 1-%u"
|
|
nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8""
|
|
nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8""
|
|
nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64""
|
|
nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16""
|
|
nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16""
|
|
nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16""
|
|
nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16""
|
|
nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64""
|
|
nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16""
|
|
nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16""
|
|
nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16""
|
|
nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16""
|
|
nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16""
|
|
nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64""
|
|
nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16""
|
|
nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16""
|
|
nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16""
|
|
nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32""
|
|
nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32""
|
|
nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues"
|
|
nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues"
|
|
nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
|
|
nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null"
|
|
nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64""
|
|
nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64""
|
|
nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u"
|
|
nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u"
|
|
nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u"
|
|
nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u"
|
|
nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u"
|
|
nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u"
|
|
nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero"
|
|
nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
|
|
nvme_err_startfail(void) "setting controller enable bit failed"
|
|
|
|
# Traces for undefined behavior
|
|
nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
|
|
nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u"
|
|
nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled"
|
|
nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status"
|
|
nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)"
|
|
nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)"
|
|
nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored"
|
|
nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored"
|
|
nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64""
|
|
nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64""
|
|
nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64""
|
|
nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0"
|
|
nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring"
|
|
nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring"
|
|
nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring"
|
|
nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
|
|
# hw/block/xen_disk.c
|
|
xen_disk_alloc(char *name) "%s"
|
|
xen_disk_init(char *name) "%s"
|
|
xen_disk_connect(char *name) "%s"
|
|
xen_disk_disconnect(char *name) "%s"
|
|
xen_disk_free(char *name) "%s"
|