mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-28 14:00:44 +00:00
49865b9014
Change the allwinner-h3 based board to use the new boot.c functionality to allow us to enable psci-conduit only if the guest is being booted in EL1 or EL2, so that if the user runs guest EL3 firmware code our PSCI emulation doesn't get in its way. To do this we stop setting the psci-conduit property on the CPU objects in the SoC code, and instead set the psci_conduit field in the arm_boot_info struct to tell the common boot loader code that we'd like PSCI if the guest is starting at an EL that it makes sense with. This affects the orangepi-pc board. This commit leaves the secondary CPUs in the powered-down state if the guest is booting at EL3, which is the same behaviour as before this commit. The secondaries can no longer be started by that EL3 code making a PSCI call but can still be started via the CPU Configuration Module registers (which we model in hw/misc/allwinner-cpucfg.c). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20220127154639.2090164-6-peter.maydell@linaro.org
457 lines
18 KiB
C
457 lines
18 KiB
C
/*
|
|
* Allwinner H3 System on Chip emulation
|
|
*
|
|
* Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/module.h"
|
|
#include "qemu/units.h"
|
|
#include "hw/qdev-core.h"
|
|
#include "hw/sysbus.h"
|
|
#include "hw/char/serial.h"
|
|
#include "hw/misc/unimp.h"
|
|
#include "hw/usb/hcd-ehci.h"
|
|
#include "hw/loader.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/arm/allwinner-h3.h"
|
|
|
|
/* Memory map */
|
|
const hwaddr allwinner_h3_memmap[] = {
|
|
[AW_H3_DEV_SRAM_A1] = 0x00000000,
|
|
[AW_H3_DEV_SRAM_A2] = 0x00044000,
|
|
[AW_H3_DEV_SRAM_C] = 0x00010000,
|
|
[AW_H3_DEV_SYSCTRL] = 0x01c00000,
|
|
[AW_H3_DEV_MMC0] = 0x01c0f000,
|
|
[AW_H3_DEV_SID] = 0x01c14000,
|
|
[AW_H3_DEV_EHCI0] = 0x01c1a000,
|
|
[AW_H3_DEV_OHCI0] = 0x01c1a400,
|
|
[AW_H3_DEV_EHCI1] = 0x01c1b000,
|
|
[AW_H3_DEV_OHCI1] = 0x01c1b400,
|
|
[AW_H3_DEV_EHCI2] = 0x01c1c000,
|
|
[AW_H3_DEV_OHCI2] = 0x01c1c400,
|
|
[AW_H3_DEV_EHCI3] = 0x01c1d000,
|
|
[AW_H3_DEV_OHCI3] = 0x01c1d400,
|
|
[AW_H3_DEV_CCU] = 0x01c20000,
|
|
[AW_H3_DEV_PIT] = 0x01c20c00,
|
|
[AW_H3_DEV_UART0] = 0x01c28000,
|
|
[AW_H3_DEV_UART1] = 0x01c28400,
|
|
[AW_H3_DEV_UART2] = 0x01c28800,
|
|
[AW_H3_DEV_UART3] = 0x01c28c00,
|
|
[AW_H3_DEV_EMAC] = 0x01c30000,
|
|
[AW_H3_DEV_DRAMCOM] = 0x01c62000,
|
|
[AW_H3_DEV_DRAMCTL] = 0x01c63000,
|
|
[AW_H3_DEV_DRAMPHY] = 0x01c65000,
|
|
[AW_H3_DEV_GIC_DIST] = 0x01c81000,
|
|
[AW_H3_DEV_GIC_CPU] = 0x01c82000,
|
|
[AW_H3_DEV_GIC_HYP] = 0x01c84000,
|
|
[AW_H3_DEV_GIC_VCPU] = 0x01c86000,
|
|
[AW_H3_DEV_RTC] = 0x01f00000,
|
|
[AW_H3_DEV_CPUCFG] = 0x01f01c00,
|
|
[AW_H3_DEV_SDRAM] = 0x40000000
|
|
};
|
|
|
|
/* List of unimplemented devices */
|
|
struct AwH3Unimplemented {
|
|
const char *device_name;
|
|
hwaddr base;
|
|
hwaddr size;
|
|
} unimplemented[] = {
|
|
{ "d-engine", 0x01000000, 4 * MiB },
|
|
{ "d-inter", 0x01400000, 128 * KiB },
|
|
{ "dma", 0x01c02000, 4 * KiB },
|
|
{ "nfdc", 0x01c03000, 4 * KiB },
|
|
{ "ts", 0x01c06000, 4 * KiB },
|
|
{ "keymem", 0x01c0b000, 4 * KiB },
|
|
{ "lcd0", 0x01c0c000, 4 * KiB },
|
|
{ "lcd1", 0x01c0d000, 4 * KiB },
|
|
{ "ve", 0x01c0e000, 4 * KiB },
|
|
{ "mmc1", 0x01c10000, 4 * KiB },
|
|
{ "mmc2", 0x01c11000, 4 * KiB },
|
|
{ "crypto", 0x01c15000, 4 * KiB },
|
|
{ "msgbox", 0x01c17000, 4 * KiB },
|
|
{ "spinlock", 0x01c18000, 4 * KiB },
|
|
{ "usb0-otg", 0x01c19000, 4 * KiB },
|
|
{ "usb0-phy", 0x01c1a000, 4 * KiB },
|
|
{ "usb1-phy", 0x01c1b000, 4 * KiB },
|
|
{ "usb2-phy", 0x01c1c000, 4 * KiB },
|
|
{ "usb3-phy", 0x01c1d000, 4 * KiB },
|
|
{ "smc", 0x01c1e000, 4 * KiB },
|
|
{ "pio", 0x01c20800, 1 * KiB },
|
|
{ "owa", 0x01c21000, 1 * KiB },
|
|
{ "pwm", 0x01c21400, 1 * KiB },
|
|
{ "keyadc", 0x01c21800, 1 * KiB },
|
|
{ "pcm0", 0x01c22000, 1 * KiB },
|
|
{ "pcm1", 0x01c22400, 1 * KiB },
|
|
{ "pcm2", 0x01c22800, 1 * KiB },
|
|
{ "audio", 0x01c22c00, 2 * KiB },
|
|
{ "smta", 0x01c23400, 1 * KiB },
|
|
{ "ths", 0x01c25000, 1 * KiB },
|
|
{ "uart0", 0x01c28000, 1 * KiB },
|
|
{ "uart1", 0x01c28400, 1 * KiB },
|
|
{ "uart2", 0x01c28800, 1 * KiB },
|
|
{ "uart3", 0x01c28c00, 1 * KiB },
|
|
{ "twi0", 0x01c2ac00, 1 * KiB },
|
|
{ "twi1", 0x01c2b000, 1 * KiB },
|
|
{ "twi2", 0x01c2b400, 1 * KiB },
|
|
{ "scr", 0x01c2c400, 1 * KiB },
|
|
{ "gpu", 0x01c40000, 64 * KiB },
|
|
{ "hstmr", 0x01c60000, 4 * KiB },
|
|
{ "spi0", 0x01c68000, 4 * KiB },
|
|
{ "spi1", 0x01c69000, 4 * KiB },
|
|
{ "csi", 0x01cb0000, 320 * KiB },
|
|
{ "tve", 0x01e00000, 64 * KiB },
|
|
{ "hdmi", 0x01ee0000, 128 * KiB },
|
|
{ "r_timer", 0x01f00800, 1 * KiB },
|
|
{ "r_intc", 0x01f00c00, 1 * KiB },
|
|
{ "r_wdog", 0x01f01000, 1 * KiB },
|
|
{ "r_prcm", 0x01f01400, 1 * KiB },
|
|
{ "r_twd", 0x01f01800, 1 * KiB },
|
|
{ "r_cir-rx", 0x01f02000, 1 * KiB },
|
|
{ "r_twi", 0x01f02400, 1 * KiB },
|
|
{ "r_uart", 0x01f02800, 1 * KiB },
|
|
{ "r_pio", 0x01f02c00, 1 * KiB },
|
|
{ "r_pwm", 0x01f03800, 1 * KiB },
|
|
{ "core-dbg", 0x3f500000, 128 * KiB },
|
|
{ "tsgen-ro", 0x3f506000, 4 * KiB },
|
|
{ "tsgen-ctl", 0x3f507000, 4 * KiB },
|
|
{ "ddr-mem", 0x40000000, 2 * GiB },
|
|
{ "n-brom", 0xffff0000, 32 * KiB },
|
|
{ "s-brom", 0xffff0000, 64 * KiB }
|
|
};
|
|
|
|
/* Per Processor Interrupts */
|
|
enum {
|
|
AW_H3_GIC_PPI_MAINT = 9,
|
|
AW_H3_GIC_PPI_HYPTIMER = 10,
|
|
AW_H3_GIC_PPI_VIRTTIMER = 11,
|
|
AW_H3_GIC_PPI_SECTIMER = 13,
|
|
AW_H3_GIC_PPI_PHYSTIMER = 14
|
|
};
|
|
|
|
/* Shared Processor Interrupts */
|
|
enum {
|
|
AW_H3_GIC_SPI_UART0 = 0,
|
|
AW_H3_GIC_SPI_UART1 = 1,
|
|
AW_H3_GIC_SPI_UART2 = 2,
|
|
AW_H3_GIC_SPI_UART3 = 3,
|
|
AW_H3_GIC_SPI_TIMER0 = 18,
|
|
AW_H3_GIC_SPI_TIMER1 = 19,
|
|
AW_H3_GIC_SPI_MMC0 = 60,
|
|
AW_H3_GIC_SPI_EHCI0 = 72,
|
|
AW_H3_GIC_SPI_OHCI0 = 73,
|
|
AW_H3_GIC_SPI_EHCI1 = 74,
|
|
AW_H3_GIC_SPI_OHCI1 = 75,
|
|
AW_H3_GIC_SPI_EHCI2 = 76,
|
|
AW_H3_GIC_SPI_OHCI2 = 77,
|
|
AW_H3_GIC_SPI_EHCI3 = 78,
|
|
AW_H3_GIC_SPI_OHCI3 = 79,
|
|
AW_H3_GIC_SPI_EMAC = 82
|
|
};
|
|
|
|
/* Allwinner H3 general constants */
|
|
enum {
|
|
AW_H3_GIC_NUM_SPI = 128
|
|
};
|
|
|
|
void allwinner_h3_bootrom_setup(AwH3State *s, BlockBackend *blk)
|
|
{
|
|
const int64_t rom_size = 32 * KiB;
|
|
g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size);
|
|
|
|
if (blk_pread(blk, 8 * KiB, buffer, rom_size) < 0) {
|
|
error_setg(&error_fatal, "%s: failed to read BlockBackend data",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
rom_add_blob("allwinner-h3.bootrom", buffer, rom_size,
|
|
rom_size, s->memmap[AW_H3_DEV_SRAM_A1],
|
|
NULL, NULL, NULL, NULL, false);
|
|
}
|
|
|
|
static void allwinner_h3_init(Object *obj)
|
|
{
|
|
AwH3State *s = AW_H3(obj);
|
|
|
|
s->memmap = allwinner_h3_memmap;
|
|
|
|
for (int i = 0; i < AW_H3_NUM_CPUS; i++) {
|
|
object_initialize_child(obj, "cpu[*]", &s->cpus[i],
|
|
ARM_CPU_TYPE_NAME("cortex-a7"));
|
|
}
|
|
|
|
object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC);
|
|
|
|
object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT);
|
|
object_property_add_alias(obj, "clk0-freq", OBJECT(&s->timer),
|
|
"clk0-freq");
|
|
object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer),
|
|
"clk1-freq");
|
|
|
|
object_initialize_child(obj, "ccu", &s->ccu, TYPE_AW_H3_CCU);
|
|
|
|
object_initialize_child(obj, "sysctrl", &s->sysctrl, TYPE_AW_H3_SYSCTRL);
|
|
|
|
object_initialize_child(obj, "cpucfg", &s->cpucfg, TYPE_AW_CPUCFG);
|
|
|
|
object_initialize_child(obj, "sid", &s->sid, TYPE_AW_SID);
|
|
object_property_add_alias(obj, "identifier", OBJECT(&s->sid),
|
|
"identifier");
|
|
|
|
object_initialize_child(obj, "mmc0", &s->mmc0, TYPE_AW_SDHOST_SUN5I);
|
|
|
|
object_initialize_child(obj, "emac", &s->emac, TYPE_AW_SUN8I_EMAC);
|
|
|
|
object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_H3_DRAMC);
|
|
object_property_add_alias(obj, "ram-addr", OBJECT(&s->dramc),
|
|
"ram-addr");
|
|
object_property_add_alias(obj, "ram-size", OBJECT(&s->dramc),
|
|
"ram-size");
|
|
|
|
object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I);
|
|
}
|
|
|
|
static void allwinner_h3_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
AwH3State *s = AW_H3(dev);
|
|
unsigned i;
|
|
|
|
/* CPUs */
|
|
for (i = 0; i < AW_H3_NUM_CPUS; i++) {
|
|
|
|
/*
|
|
* Disable secondary CPUs. Guest EL3 firmware will start
|
|
* them via CPU reset control registers.
|
|
*/
|
|
qdev_prop_set_bit(DEVICE(&s->cpus[i]), "start-powered-off",
|
|
i > 0);
|
|
|
|
/* All exception levels required */
|
|
qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el3", true);
|
|
qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el2", true);
|
|
|
|
/* Mark realized */
|
|
qdev_realize(DEVICE(&s->cpus[i]), NULL, &error_fatal);
|
|
}
|
|
|
|
/* Generic Interrupt Controller */
|
|
qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", AW_H3_GIC_NUM_SPI +
|
|
GIC_INTERNAL);
|
|
qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2);
|
|
qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", AW_H3_NUM_CPUS);
|
|
qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", false);
|
|
qdev_prop_set_bit(DEVICE(&s->gic), "has-virtualization-extensions", true);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gic), &error_fatal);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, s->memmap[AW_H3_DEV_GIC_DIST]);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, s->memmap[AW_H3_DEV_GIC_CPU]);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2, s->memmap[AW_H3_DEV_GIC_HYP]);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3, s->memmap[AW_H3_DEV_GIC_VCPU]);
|
|
|
|
/*
|
|
* Wire the outputs from each CPU's generic timer and the GICv3
|
|
* maintenance interrupt signal to the appropriate GIC PPI inputs,
|
|
* and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
|
|
*/
|
|
for (i = 0; i < AW_H3_NUM_CPUS; i++) {
|
|
DeviceState *cpudev = DEVICE(&s->cpus[i]);
|
|
int ppibase = AW_H3_GIC_NUM_SPI + i * GIC_INTERNAL + GIC_NR_SGIS;
|
|
int irq;
|
|
/*
|
|
* Mapping from the output timer irq lines from the CPU to the
|
|
* GIC PPI inputs used for this board.
|
|
*/
|
|
const int timer_irq[] = {
|
|
[GTIMER_PHYS] = AW_H3_GIC_PPI_PHYSTIMER,
|
|
[GTIMER_VIRT] = AW_H3_GIC_PPI_VIRTTIMER,
|
|
[GTIMER_HYP] = AW_H3_GIC_PPI_HYPTIMER,
|
|
[GTIMER_SEC] = AW_H3_GIC_PPI_SECTIMER,
|
|
};
|
|
|
|
/* Connect CPU timer outputs to GIC PPI inputs */
|
|
for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
|
|
qdev_connect_gpio_out(cpudev, irq,
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
ppibase + timer_irq[irq]));
|
|
}
|
|
|
|
/* Connect GIC outputs to CPU interrupt inputs */
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
|
|
qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + AW_H3_NUM_CPUS,
|
|
qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (2 * AW_H3_NUM_CPUS),
|
|
qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (3 * AW_H3_NUM_CPUS),
|
|
qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
|
|
|
|
/* GIC maintenance signal */
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (4 * AW_H3_NUM_CPUS),
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
ppibase + AW_H3_GIC_PPI_MAINT));
|
|
}
|
|
|
|
/* Timer */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->timer), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer), 0, s->memmap[AW_H3_DEV_PIT]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER0));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 1,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER1));
|
|
|
|
/* SRAM */
|
|
memory_region_init_ram(&s->sram_a1, OBJECT(dev), "sram A1",
|
|
64 * KiB, &error_abort);
|
|
memory_region_init_ram(&s->sram_a2, OBJECT(dev), "sram A2",
|
|
32 * KiB, &error_abort);
|
|
memory_region_init_ram(&s->sram_c, OBJECT(dev), "sram C",
|
|
44 * KiB, &error_abort);
|
|
memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_DEV_SRAM_A1],
|
|
&s->sram_a1);
|
|
memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_DEV_SRAM_A2],
|
|
&s->sram_a2);
|
|
memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_DEV_SRAM_C],
|
|
&s->sram_c);
|
|
|
|
/* Clock Control Unit */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->ccu), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_DEV_CCU]);
|
|
|
|
/* System Control */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->sysctrl), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_DEV_SYSCTRL]);
|
|
|
|
/* CPU Configuration */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->cpucfg), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->cpucfg), 0, s->memmap[AW_H3_DEV_CPUCFG]);
|
|
|
|
/* Security Identifier */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->sid), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_DEV_SID]);
|
|
|
|
/* SD/MMC */
|
|
object_property_set_link(OBJECT(&s->mmc0), "dma-memory",
|
|
OBJECT(get_system_memory()), &error_fatal);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->mmc0), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, s->memmap[AW_H3_DEV_MMC0]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_MMC0));
|
|
|
|
object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0),
|
|
"sd-bus");
|
|
|
|
/* EMAC */
|
|
/* FIXME use qdev NIC properties instead of nd_table[] */
|
|
if (nd_table[0].used) {
|
|
qemu_check_nic_model(&nd_table[0], TYPE_AW_SUN8I_EMAC);
|
|
qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
|
|
}
|
|
object_property_set_link(OBJECT(&s->emac), "dma-memory",
|
|
OBJECT(get_system_memory()), &error_fatal);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->emac), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->emac), 0, s->memmap[AW_H3_DEV_EMAC]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->emac), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_EMAC));
|
|
|
|
/* Universal Serial Bus */
|
|
sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_DEV_EHCI0],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_EHCI0));
|
|
sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_DEV_EHCI1],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_EHCI1));
|
|
sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_DEV_EHCI2],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_EHCI2));
|
|
sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_DEV_EHCI3],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_EHCI3));
|
|
|
|
sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_DEV_OHCI0],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_OHCI0));
|
|
sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_DEV_OHCI1],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_OHCI1));
|
|
sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_DEV_OHCI2],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_OHCI2));
|
|
sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_DEV_OHCI3],
|
|
qdev_get_gpio_in(DEVICE(&s->gic),
|
|
AW_H3_GIC_SPI_OHCI3));
|
|
|
|
/* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */
|
|
serial_mm_init(get_system_memory(), s->memmap[AW_H3_DEV_UART0], 2,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0),
|
|
115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
|
|
/* UART1 */
|
|
serial_mm_init(get_system_memory(), s->memmap[AW_H3_DEV_UART1], 2,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART1),
|
|
115200, serial_hd(1), DEVICE_NATIVE_ENDIAN);
|
|
/* UART2 */
|
|
serial_mm_init(get_system_memory(), s->memmap[AW_H3_DEV_UART2], 2,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART2),
|
|
115200, serial_hd(2), DEVICE_NATIVE_ENDIAN);
|
|
/* UART3 */
|
|
serial_mm_init(get_system_memory(), s->memmap[AW_H3_DEV_UART3], 2,
|
|
qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART3),
|
|
115200, serial_hd(3), DEVICE_NATIVE_ENDIAN);
|
|
|
|
/* DRAMC */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, s->memmap[AW_H3_DEV_DRAMCOM]);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 1, s->memmap[AW_H3_DEV_DRAMCTL]);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 2, s->memmap[AW_H3_DEV_DRAMPHY]);
|
|
|
|
/* RTC */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]);
|
|
|
|
/* Unimplemented devices */
|
|
for (i = 0; i < ARRAY_SIZE(unimplemented); i++) {
|
|
create_unimplemented_device(unimplemented[i].device_name,
|
|
unimplemented[i].base,
|
|
unimplemented[i].size);
|
|
}
|
|
}
|
|
|
|
static void allwinner_h3_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
dc->realize = allwinner_h3_realize;
|
|
/* Reason: uses serial_hd() in realize function */
|
|
dc->user_creatable = false;
|
|
}
|
|
|
|
static const TypeInfo allwinner_h3_type_info = {
|
|
.name = TYPE_AW_H3,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_size = sizeof(AwH3State),
|
|
.instance_init = allwinner_h3_init,
|
|
.class_init = allwinner_h3_class_init,
|
|
};
|
|
|
|
static void allwinner_h3_register_types(void)
|
|
{
|
|
type_register_static(&allwinner_h3_type_info);
|
|
}
|
|
|
|
type_init(allwinner_h3_register_types)
|