xemu/hw/char/sh_serial.c
Geert Uytterhoeven 71bb4ce1b5 hw/char/sh_serial: Add timeout handling to unbreak serial input
As of commit 18e8cf159177100e ("serial: sh-sci: increase RX FIFO trigger
defaults for (H)SCIF") in Linux v4.11-rc1, the serial console on the
QEMU SH4 target is broken: it delays serial input until enough data has
been received.

Since aforementioned commit, the Linux SCIF driver programs the Receive
FIFO Data Count Trigger bits in the FIFO Control Register, to postpone
generating a receive interrupt until:
  1. At least the receive trigger count of bytes of data are available
     in the receive FIFO, OR
  2. No further data has been received for at least 15 etu after the
     last received data.

While QEMU implements the former, it does not implement the latter.
Hence the receive interrupt is not generated until the former condition
is met.

Fix this by adding basic timeout handling.  As the QEMU SCIF emulation
ignores any serial speed programming, the timeout value used conforms to
a default speed of 9600 bps, which is fine for any interactive console.

Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <uli@fpond.eu>
Tested-by: Rob Landley <rob@landley.net>
Tested-by: Rich Felker <dalias@libc.org>
Message-Id: <20180905131125.12635-1-geert+renesas@glider.be>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 18:47:55 +02:00

431 lines
11 KiB
C

/*
* QEMU SCI/SCIF serial port emulation
*
* Copyright (c) 2007 Magnus Damm
*
* Based on serial.c - QEMU 16450 UART emulation
* Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/sh4/sh.h"
#include "chardev/char-fe.h"
#include "qapi/error.h"
#include "qemu/timer.h"
//#define DEBUG_SERIAL
#define SH_SERIAL_FLAG_TEND (1 << 0)
#define SH_SERIAL_FLAG_TDE (1 << 1)
#define SH_SERIAL_FLAG_RDF (1 << 2)
#define SH_SERIAL_FLAG_BRK (1 << 3)
#define SH_SERIAL_FLAG_DR (1 << 4)
#define SH_RX_FIFO_LENGTH (16)
typedef struct {
MemoryRegion iomem;
MemoryRegion iomem_p4;
MemoryRegion iomem_a7;
uint8_t smr;
uint8_t brr;
uint8_t scr;
uint8_t dr; /* ftdr / tdr */
uint8_t sr; /* fsr / ssr */
uint16_t fcr;
uint8_t sptr;
uint8_t rx_fifo[SH_RX_FIFO_LENGTH]; /* frdr / rdr */
uint8_t rx_cnt;
uint8_t rx_tail;
uint8_t rx_head;
int freq;
int feat;
int flags;
int rtrg;
CharBackend chr;
QEMUTimer *fifo_timeout_timer;
uint64_t etu; /* Elementary Time Unit (ns) */
qemu_irq eri;
qemu_irq rxi;
qemu_irq txi;
qemu_irq tei;
qemu_irq bri;
} sh_serial_state;
static void sh_serial_clear_fifo(sh_serial_state * s)
{
memset(s->rx_fifo, 0, SH_RX_FIFO_LENGTH);
s->rx_cnt = 0;
s->rx_head = 0;
s->rx_tail = 0;
}
static void sh_serial_write(void *opaque, hwaddr offs,
uint64_t val, unsigned size)
{
sh_serial_state *s = opaque;
unsigned char ch;
#ifdef DEBUG_SERIAL
printf("sh_serial: write offs=0x%02x val=0x%02x\n",
offs, val);
#endif
switch(offs) {
case 0x00: /* SMR */
s->smr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0x7b : 0xff);
return;
case 0x04: /* BRR */
s->brr = val;
return;
case 0x08: /* SCR */
/* TODO : For SH7751, SCIF mask should be 0xfb. */
s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff);
if (!(val & (1 << 5)))
s->flags |= SH_SERIAL_FLAG_TEND;
if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) {
qemu_set_irq(s->txi, val & (1 << 7));
}
if (!(val & (1 << 6))) {
qemu_set_irq(s->rxi, 0);
}
return;
case 0x0c: /* FTDR / TDR */
if (qemu_chr_fe_backend_connected(&s->chr)) {
ch = val;
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &ch, 1);
}
s->dr = val;
s->flags &= ~SH_SERIAL_FLAG_TDE;
return;
#if 0
case 0x14: /* FRDR / RDR */
ret = 0;
break;
#endif
}
if (s->feat & SH_SERIAL_FEAT_SCIF) {
switch(offs) {
case 0x10: /* FSR */
if (!(val & (1 << 6)))
s->flags &= ~SH_SERIAL_FLAG_TEND;
if (!(val & (1 << 5)))
s->flags &= ~SH_SERIAL_FLAG_TDE;
if (!(val & (1 << 4)))
s->flags &= ~SH_SERIAL_FLAG_BRK;
if (!(val & (1 << 1)))
s->flags &= ~SH_SERIAL_FLAG_RDF;
if (!(val & (1 << 0)))
s->flags &= ~SH_SERIAL_FLAG_DR;
if (!(val & (1 << 1)) || !(val & (1 << 0))) {
if (s->rxi) {
qemu_set_irq(s->rxi, 0);
}
}
return;
case 0x18: /* FCR */
s->fcr = val;
switch ((val >> 6) & 3) {
case 0:
s->rtrg = 1;
break;
case 1:
s->rtrg = 4;
break;
case 2:
s->rtrg = 8;
break;
case 3:
s->rtrg = 14;
break;
}
if (val & (1 << 1)) {
sh_serial_clear_fifo(s);
s->sr &= ~(1 << 1);
}
return;
case 0x20: /* SPTR */
s->sptr = val & 0xf3;
return;
case 0x24: /* LSR */
return;
}
}
else {
switch(offs) {
#if 0
case 0x0c:
ret = s->dr;
break;
case 0x10:
ret = 0;
break;
#endif
case 0x1c:
s->sptr = val & 0x8f;
return;
}
}
fprintf(stderr, "sh_serial: unsupported write to 0x%02"
HWADDR_PRIx "\n", offs);
abort();
}
static uint64_t sh_serial_read(void *opaque, hwaddr offs,
unsigned size)
{
sh_serial_state *s = opaque;
uint32_t ret = ~0;
#if 0
switch(offs) {
case 0x00:
ret = s->smr;
break;
case 0x04:
ret = s->brr;
break;
case 0x08:
ret = s->scr;
break;
case 0x14:
ret = 0;
break;
}
#endif
if (s->feat & SH_SERIAL_FEAT_SCIF) {
switch(offs) {
case 0x00: /* SMR */
ret = s->smr;
break;
case 0x08: /* SCR */
ret = s->scr;
break;
case 0x10: /* FSR */
ret = 0;
if (s->flags & SH_SERIAL_FLAG_TEND)
ret |= (1 << 6);
if (s->flags & SH_SERIAL_FLAG_TDE)
ret |= (1 << 5);
if (s->flags & SH_SERIAL_FLAG_BRK)
ret |= (1 << 4);
if (s->flags & SH_SERIAL_FLAG_RDF)
ret |= (1 << 1);
if (s->flags & SH_SERIAL_FLAG_DR)
ret |= (1 << 0);
if (s->scr & (1 << 5))
s->flags |= SH_SERIAL_FLAG_TDE | SH_SERIAL_FLAG_TEND;
break;
case 0x14:
if (s->rx_cnt > 0) {
ret = s->rx_fifo[s->rx_tail++];
s->rx_cnt--;
if (s->rx_tail == SH_RX_FIFO_LENGTH)
s->rx_tail = 0;
if (s->rx_cnt < s->rtrg)
s->flags &= ~SH_SERIAL_FLAG_RDF;
}
break;
case 0x18:
ret = s->fcr;
break;
case 0x1c:
ret = s->rx_cnt;
break;
case 0x20:
ret = s->sptr;
break;
case 0x24:
ret = 0;
break;
}
}
else {
switch(offs) {
#if 0
case 0x0c:
ret = s->dr;
break;
case 0x10:
ret = 0;
break;
case 0x14:
ret = s->rx_fifo[0];
break;
#endif
case 0x1c:
ret = s->sptr;
break;
}
}
#ifdef DEBUG_SERIAL
printf("sh_serial: read offs=0x%02x val=0x%x\n",
offs, ret);
#endif
if (ret & ~((1 << 16) - 1)) {
fprintf(stderr, "sh_serial: unsupported read from 0x%02"
HWADDR_PRIx "\n", offs);
abort();
}
return ret;
}
static int sh_serial_can_receive(sh_serial_state *s)
{
return s->scr & (1 << 4);
}
static void sh_serial_receive_break(sh_serial_state *s)
{
if (s->feat & SH_SERIAL_FEAT_SCIF)
s->sr |= (1 << 4);
}
static int sh_serial_can_receive1(void *opaque)
{
sh_serial_state *s = opaque;
return sh_serial_can_receive(s);
}
static void sh_serial_timeout_int(void *opaque)
{
sh_serial_state *s = opaque;
s->flags |= SH_SERIAL_FLAG_RDF;
if (s->scr & (1 << 6) && s->rxi) {
qemu_set_irq(s->rxi, 1);
}
}
static void sh_serial_receive1(void *opaque, const uint8_t *buf, int size)
{
sh_serial_state *s = opaque;
if (s->feat & SH_SERIAL_FEAT_SCIF) {
int i;
for (i = 0; i < size; i++) {
if (s->rx_cnt < SH_RX_FIFO_LENGTH) {
s->rx_fifo[s->rx_head++] = buf[i];
if (s->rx_head == SH_RX_FIFO_LENGTH) {
s->rx_head = 0;
}
s->rx_cnt++;
if (s->rx_cnt >= s->rtrg) {
s->flags |= SH_SERIAL_FLAG_RDF;
if (s->scr & (1 << 6) && s->rxi) {
timer_del(s->fifo_timeout_timer);
qemu_set_irq(s->rxi, 1);
}
} else {
timer_mod(s->fifo_timeout_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 15 * s->etu);
}
}
}
} else {
s->rx_fifo[0] = buf[0];
}
}
static void sh_serial_event(void *opaque, int event)
{
sh_serial_state *s = opaque;
if (event == CHR_EVENT_BREAK)
sh_serial_receive_break(s);
}
static const MemoryRegionOps sh_serial_ops = {
.read = sh_serial_read,
.write = sh_serial_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
void sh_serial_init(MemoryRegion *sysmem,
hwaddr base, int feat,
uint32_t freq, Chardev *chr,
qemu_irq eri_source,
qemu_irq rxi_source,
qemu_irq txi_source,
qemu_irq tei_source,
qemu_irq bri_source)
{
sh_serial_state *s;
s = g_malloc0(sizeof(sh_serial_state));
s->feat = feat;
s->flags = SH_SERIAL_FLAG_TEND | SH_SERIAL_FLAG_TDE;
s->rtrg = 1;
s->smr = 0;
s->brr = 0xff;
s->scr = 1 << 5; /* pretend that TX is enabled so early printk works */
s->sptr = 0;
if (feat & SH_SERIAL_FEAT_SCIF) {
s->fcr = 0;
}
else {
s->dr = 0xff;
}
sh_serial_clear_fifo(s);
memory_region_init_io(&s->iomem, NULL, &sh_serial_ops, s,
"serial", 0x100000000ULL);
memory_region_init_alias(&s->iomem_p4, NULL, "serial-p4", &s->iomem,
0, 0x28);
memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4);
memory_region_init_alias(&s->iomem_a7, NULL, "serial-a7", &s->iomem,
0, 0x28);
memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7);
if (chr) {
qemu_chr_fe_init(&s->chr, chr, &error_abort);
qemu_chr_fe_set_handlers(&s->chr, sh_serial_can_receive1,
sh_serial_receive1,
sh_serial_event, NULL, s, NULL, true);
}
s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
sh_serial_timeout_int, s);
s->etu = NANOSECONDS_PER_SECOND / 9600;
s->eri = eri_source;
s->rxi = rxi_source;
s->txi = txi_source;
s->tei = tei_source;
s->bri = bri_source;
}