xemu/tests/qemu-iotests/026
Eric Blake 5be5b7764f blkdebug: Avoid '.' in enum values
Our qapi conventions document that '.' should only be used in
the prefix of downstream names.  BlkdebugEvent was a lone
exception to this.  Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable.  It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.

Done with:

$ for str in \
     l1_grow.{alloc,write,activate}_table \
     l2_alloc.{cow_read,write} \
     refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
     pwritev_rmw.{head,after_head,tail,after_tail}; do
   str1=$(echo "$str" | sed 's/\./\\./')
   str2=$(echo "$str" | sed 's/\./_/')
   git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
 done

followed by a manual touchup to test 77 to keep the test working.

Reported-by: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00

208 lines
4.4 KiB
Bash
Executable File

#!/bin/bash
#
# qcow2 error path testing
#
# Copyright (C) 2010 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# creator
owner=kwolf@redhat.com
seq=`basename $0`
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
_cleanup()
{
_cleanup_test_img
rm "$TEST_DIR/blkdebug.conf"
}
trap "_cleanup; exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common.rc
. ./common.filter
. ./common.pattern
# Currently only qcow2 supports rebasing
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
_default_cache_mode "writethrough"
_supported_cache_modes "writethrough" "none"
# The refcount table tests expect a certain minimum width for refcount entries
# (so that the refcount table actually needs to grow); that minimum is 16 bits,
# being the default refcount entry width.
# 32 and 64 bits do not work either, however, due to different leaked cluster
# count on error.
# Thus, the only remaining option is refcount_bits=16.
_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
echo "Errors while writing 128 kB"
echo
CLUSTER_SIZE=1024
BLKDBG_TEST_IMG="blkdebug:$TEST_DIR/blkdebug.conf:$TEST_IMG"
for event in \
l1_update \
\
l2_load \
l2_update \
l2_alloc_write \
\
write_aio \
\
refblock_load \
refblock_update_part \
refblock_alloc \
\
cluster_alloc \
do
for errno in 5 28; do
for imm in off; do
for once in on off; do
for vmstate in "" "-b"; do
cat > "$TEST_DIR/blkdebug.conf" <<EOF
[inject-error]
event = "$event"
errno = "$errno"
immediately = "$imm"
once ="$once"
EOF
_make_test_img 1G
echo
echo "Event: $event; errno: $errno; imm: $imm; once: $once; write $vmstate"
# We want to catch a simple L2 update, not the allocation of the first L2 table
if [ "$event" == "l2_update" ]; then
$QEMU_IO -c "write $vmstate 0 512" "$TEST_IMG" > /dev/null 2>&1
fi
$QEMU_IO -c "write $vmstate 0 128k " "$BLKDBG_TEST_IMG" | _filter_qemu_io
# l2_load is not called on allocation, so issue a second write
# Reads are another path to trigger l2_load, so do a read, too
if [ "$event" == "l2_load" ]; then
$QEMU_IO -c "write $vmstate 0 128k " "$BLKDBG_TEST_IMG" | _filter_qemu_io
$QEMU_IO -c "read $vmstate 0 128k " "$BLKDBG_TEST_IMG" | _filter_qemu_io
fi
_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
done
done
done
echo
echo === Refcout table growth tests ===
echo
CLUSTER_SIZE=512
for event in \
refblock_alloc_hookup \
refblock_alloc_write \
refblock_alloc_write_blocks \
refblock_alloc_write_table \
refblock_alloc_switch_table \
do
# This one takes a while, so let's test only one error code (ENOSPC should
# never be generated by qemu, so it's probably a good choice)
for errno in 28; do
for imm in off; do
for once in on off; do
for vmstate in "" "-b"; do
cat > "$TEST_DIR/blkdebug.conf" <<EOF
[inject-error]
event = "$event"
errno = "$errno"
immediately = "$imm"
once = "$once"
EOF
_make_test_img 1G
echo
echo "Event: $event; errno: $errno; imm: $imm; once: $once; write $vmstate"
$QEMU_IO -c "write $vmstate 0 64M" "$BLKDBG_TEST_IMG" | _filter_qemu_io
_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
done
done
done
echo
echo === L1 growth tests ===
echo
CLUSTER_SIZE=1024
for event in \
l1_grow_alloc_table \
l1_grow_write_table \
l1_grow_activate_table \
do
for errno in 5 28; do
for imm in off; do
for once in on off; do
cat > "$TEST_DIR/blkdebug.conf" <<EOF
[inject-error]
event = "$event"
errno = "$errno"
immediately = "$imm"
once = "$once"
EOF
_make_test_img 1G
echo
echo "Event: $event; errno: $errno; imm: $imm; once: $once"
$QEMU_IO -c "write -b 0 64k" "$BLKDBG_TEST_IMG" | _filter_qemu_io
_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
done
done
# success, all done
echo "*** done"
rm -f $seq.full
status=0