FFmpeg/doc/examples/Makefile

# use pkg-config for getting CFLAGS and LDLIBS
FFMPEG_LIBS=    libavdevice                        \
                libavformat                        \
                libavfilter                        \
                libavcodec                         \
                libswresample                      \
                libswscale                         \
                libavutil                          \

CFLAGS += -Wall -g
CFLAGS := $(shell pkg-config --cflags $(FFMPEG_LIBS)) $(CFLAGS)
LDLIBS := $(shell pkg-config --libs $(FFMPEG_LIBS)) $(LDLIBS)

EXAMPLES=       avio_dir_cmd                       \
                avio_reading                       \
                decode_audio                       \
                decode_video                       \
                demuxing_decoding                  \
                encode_audio                       \
                encode_video                       \
                extract_mvs                        \
                filtering_video                    \
                filtering_audio                    \
                http_multiclient                   \
                hw_decode                          \
                metadata                           \
                muxing                             \
                remuxing                           \
                resampling_audio                   \
                scaling_video                      \
                transcode_aac                      \
                transcoding                        \

OBJS=$(addsuffix .o,$(EXAMPLES))

# the following examples make explicit use of the math library
avcodec:           LDLIBS += -lm
encode_audio:      LDLIBS += -lm
muxing:            LDLIBS += -lm
resampling_audio:  LDLIBS += -lm

.phony: all clean-test clean

all: $(OBJS) $(EXAMPLES)

clean-test:
	$(RM) test*.pgm test.h264 test.mp2 test.sw test.mpg

clean: clean-test
	$(RM) $(EXAMPLES) $(OBJS)
doc/examples: fix typo. 2012-05-12 16:08:26 +00:00			`# use pkg-config for getting CFLAGS and LDLIBS`
doc/examples/Makefile: split lines up to make diffs that change them clearer Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2012-05-08 16:22:28 +00:00			`FFMPEG_LIBS= libavdevice \`
			`libavformat \`
			`libavfilter \`
			`libavcodec \`
doc/examples: add libswresample in the libraries. It is required for audio filtering. 2012-05-09 21:45:16 +00:00			`libswresample \`
doc/examples/Makefile: split lines up to make diffs that change them clearer Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2012-05-08 16:22:28 +00:00			`libswscale \`
			`libavutil \`

examples/Makefile: disable -O2 optimizations There is no much point in optimizing example code, and the -O2 flag is annoying when debugging. 2013-06-26 14:13:58 +00:00			`CFLAGS += -Wall -g`
examples/Makefile: give priority to pkg-config flags In case CFLAGS/LDLIBS are already defined and conflicting with the pkg-config flags, give priority to the latter since they are used to detect compilation flags. This should fix for example the case where there are many different instances of a library, CFLAGS=-I/foo/include and pkg-config cflags say -I/bar/include. 2012-08-24 14:49:04 +00:00			`CFLAGS := $(shell pkg-config --cflags $(FFMPEG_LIBS)) $(CFLAGS)`
			`LDLIBS := $(shell pkg-config --libs $(FFMPEG_LIBS)) $(LDLIBS)`
examples: move API examples to a dedicated dir in doc 2011-05-29 10:47:40 +00:00
doc/examples: rename avio_list_dir -> avio_dir_cmd Signed-off-by: Michael Niedermayer <michael@niedermayer.cc> 2015-08-15 15:59:17 +00:00			`EXAMPLES= avio_dir_cmd \`
doc/examples: add directory listing example Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2014-07-05 16:12:04 +00:00			`avio_reading \`
Merge commit 'f5df897c4b61985e3afc89ba1290649712ff438e' * commit 'f5df897c4b61985e3afc89ba1290649712ff438e': examples/avcodec: split audio decoding into a separate example Merged-by: Clément Bœsch <u@pkh.me> 2017-03-29 11:38:29 +00:00			`decode_audio \`
Merge commit '7b1f03477f1a43d2261fbd83e50a4ad90c7f806d' * commit '7b1f03477f1a43d2261fbd83e50a4ad90c7f806d': examples/avcodec: split the remaining two examples into separate files Merged-by: Clément Bœsch <u@pkh.me> 2017-03-29 12:07:39 +00:00			`decode_video \`
doc/examples: rename demuxing to demuxing_decoding. That example shows how the decoding process works, not only the demuxing. 2013-11-04 11:35:17 +00:00			`demuxing_decoding \`
Merge commit '40aaa8dadfd1c69ff4460d04750e1403b5535a6d' * commit '40aaa8dadfd1c69ff4460d04750e1403b5535a6d': examples/avcodec: split audio encoding into a separate example Merged-by: Clément Bœsch <u@pkh.me> 2017-03-29 11:29:00 +00:00			`encode_audio \`
Merge commit '7b1f03477f1a43d2261fbd83e50a4ad90c7f806d' * commit '7b1f03477f1a43d2261fbd83e50a4ad90c7f806d': examples/avcodec: split the remaining two examples into separate files Merged-by: Clément Bœsch <u@pkh.me> 2017-03-29 12:07:39 +00:00			`encode_video \`
avcodec: export motion vectors in frame side data on demand The reasoning behind this addition is that various third party applications are interested in getting some motion information out of a video "for free" when it is available. It was considered to export other information as well (such as the intra information about the block, or the quantization) but the structure might have ended up into a half full-generic, half full of codec specific cruft. If more information is necessary, it should either be added in the "flags" field of the AVMotionVector structure, or in another side-data. This commit also includes an example exporting them in a CSV stream. 2014-07-16 14:42:42 +00:00			`extract_mvs \`
doc/examples/Makefile: split lines up to make diffs that change them clearer Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2012-05-08 16:22:28 +00:00			`filtering_video \`
			`filtering_audio \`
doc/example: Add http multi-client example code Signed-off-by: Stephan Holljes <klaxa1337@googlemail.com> 2015-07-25 00:07:15 +00:00			`http_multiclient \`
examples/hw_decode: Add a HWAccel decoding example. Works with VAAPI, VDPAU, DXVA2 and D3D11VA. Signed-off-by: Liu, Kaixuan <kaixuan.liu@intel.com> Signed-off-by: Jun Zhao <jun.zhao@intel.com> Reviewed-by: Steven Liu <lingjiujianke@gmail.com> Signed-off-by: Mark Thompson <sw@jkqxz.net> 2017-07-20 04:58:56 +00:00			`hw_decode \`
doc/examples/Makefile: split lines up to make diffs that change them clearer Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2012-05-08 16:22:28 +00:00			`metadata \`
			`muxing \`
examples: add remuxing example Show how to perform streamcopy from one container to another. 2014-01-19 12:45:48 +00:00			`remuxing \`
examples: add resampling_audio.c file 2012-11-30 12:51:40 +00:00			`resampling_audio \`
examples: add scaling_video example This example should be useful to show the basic functionality of the libswscale API. More advanced features (scaling options etc., colorspace tweaking) may be added later. 2012-08-21 12:43:51 +00:00			`scaling_video \`
doc/examples: add transcode_aac to local Makefile. 2013-11-28 12:18:58 +00:00			`transcode_aac \`
doc/examples: Add example transcoding.c Signed-off-by: Michael Niedermayer <michaelni@gmx.at> 2014-03-09 00:20:41 +00:00			`transcoding \`
examples: move API examples to a dedicated dir in doc 2011-05-29 10:47:40 +00:00
			`OBJS=$(addsuffix .o,$(EXAMPLES))`

doc/examples: link decoding_encoding and muxing with math lib. These two examples use the sin() function. 2012-05-09 21:06:43 +00:00			`# the following examples make explicit use of the math library`
Merge commit 'b339182eba34f28de5f1a477cdd2c84f1ef35d90' * commit 'b339182eba34f28de5f1a477cdd2c84f1ef35d90': Move all example programs to doc/examples Conflicts: configure doc/Makefile doc/doxy-wrapper.sh doc/examples/avcodec.c doc/examples/decoding_encoding.c doc/examples/metadata.c doc/examples/muxing.c doc/examples/transcode_aac.c libavcodec/Makefile libavcodec/api-example.c libavformat/Makefile Merged-by: Michael Niedermayer <michaelni@gmx.at> 2014-02-17 00:48:42 +00:00			`avcodec: LDLIBS += -lm`
Merge commit '40aaa8dadfd1c69ff4460d04750e1403b5535a6d' * commit '40aaa8dadfd1c69ff4460d04750e1403b5535a6d': examples/avcodec: split audio encoding into a separate example Merged-by: Clément Bœsch <u@pkh.me> 2017-03-29 11:29:00 +00:00			`encode_audio: LDLIBS += -lm`
doc/examples: link decoding_encoding and muxing with math lib. These two examples use the sin() function. 2012-05-09 21:06:43 +00:00			`muxing: LDLIBS += -lm`
doc/examples: fix lib math dep for resampling_audio. It uses at least sin() 2013-09-04 13:49:18 +00:00			`resampling_audio: LDLIBS += -lm`
doc/examples: link decoding_encoding and muxing with math lib. These two examples use the sin() function. 2012-05-09 21:06:43 +00:00
examples/decoding_encoding: store temporary files in current dir Do not clutter the temporary directory with files, also "/tmp" is not always available, e.g. in Windows. Also add the clean-test Makefile rule, which will clean the generated files. 2012-08-23 18:17:25 +00:00			`.phony: all clean-test clean`
examples: move API examples to a dedicated dir in doc 2011-05-29 10:47:40 +00:00
			`all: $(OBJS) $(EXAMPLES)`

examples/decoding_encoding: store temporary files in current dir Do not clutter the temporary directory with files, also "/tmp" is not always available, e.g. in Windows. Also add the clean-test Makefile rule, which will clean the generated files. 2012-08-23 18:17:25 +00:00			`clean-test:`
examples/scaling_video: write to rawvideo file This is more useful for testing purposes. Also allow to specify the name of the output file. 2012-08-30 20:37:44 +00:00			`$(RM) test*.pgm test.h264 test.mp2 test.sw test.mpg`
examples/decoding_encoding: store temporary files in current dir Do not clutter the temporary directory with files, also "/tmp" is not always available, e.g. in Windows. Also add the clean-test Makefile rule, which will clean the generated files. 2012-08-23 18:17:25 +00:00
			`clean: clean-test`
examples/Makefile: remove duplicated -f switch $(RM) already includes that flag. Spotted-by: ubitux 2012-08-28 18:06:45 +00:00			`$(RM) $(EXAMPLES) $(OBJS)`