This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (29 commits)
amrwb: remove duplicate arguments from extrapolate_isf().
amrwb: error out early if mode is invalid.
h264: change underread for 10bit QPEL to overread.
matroska: check buffer size for RM-style byte reordering.
vp8: disable mmx functions with sse/sse2 counterparts on x86-64.
vp8: change int stride to ptrdiff_t stride.
wma: fix invalid buffer size assumptions causing random overreads.
Windows Media Audio Lossless decoder
rv10/20: Fix slice overflow with checked bitstream reader.
h263dec: Disallow width/height changing with frame threads.
rv10/20: Fix a buffer overread caused by losing track of the remaining buffer size.
rmdec: Honor .RMF tag size rather than assuming 18.
g722: Fix the QMF scaling
r3d: don't set codec timebase.
electronicarts: set timebase for tgv video.
electronicarts: parse the framerate for cmv video.
ogg: don't set codec timebase
electronicarts: don't set codec timebase
avs: don't set codec timebase
wavpack: Fix an integer overflow
...
Conflicts:
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/fraps.c
libavcodec/h264.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/msmpeg4.c
libavcodec/pnmdec.c
libavcodec/qpeg.c
libavcodec/rawenc.c
libavcodec/ulti.c
libavcodec/vcr1.c
libavcodec/version.h
libavcodec/wmalosslessdec.c
libavformat/electronicarts.c
libswscale/ppc/yuv2rgb_altivec.c
tests/ref/acodec/g722
tests/ref/fate/ea-cmv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The container has no timestamps and the framerate isn't stored in the
data either.
The decoder sets codec timebase to experimentally found value 1/15. Do
the same for the demuxer too, it should at least be better than the
default 1/90000.
This fixes duplicate timestamps on mp2 in ts with non seekable input.
It also fixed the fate pva demux timestamps.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fields "Number of Bytes" and "Number of Frames" are mixed up. "Bytes"
come first, "Frames" behind.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master:
h264: error out on invalid bitdepth.
aacsbr: use a swap index for the Y matrix rather than copy buffers.
huffyuv: do not abort on unknown pix_fmt; instead, return an error.
lcl: return negative error codes on decode_init() errors.
rtpenc: Use MB info side data for splitting H263 packets for RFC 2190
h263enc: Add an option for outputting info about MBs as side data
avpacket: Add a function for shrinking already allocated side data
nellymoserdec: Saner and faster IMDCT windowing
Conflicts:
doc/APIchanges
libavcodec/avpacket.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the packetization spec compliant for cases where one single
GOB doesn't fit into an RTP packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes cases where the user had specified one desired MTU
via an option, and the protocol indicates another one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Frame sizes in ID3v2.3 are not synchsafe, they are simply 32be numbers.
In practice this bug is not noticeable unless the frame size takes more
than 7 bits (which is almost never for text frames).
Seeking back on EOF will reset the EOF flag, causing us to re-enter
the loop to find the next marker in the ASF file, thus potentially
causing an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
adpcm: Clip step_index values read from the bitstream at the beginning of each frame.
oma: don't read beyond end of leaf_table.
doxygen: Remove documentation for non-existing parameters; misc small fixes.
Indeo3: fix crashes on corrupt bitstreams.
msmpeg4: Replace forward declaration by proper #include.
segment: implement wrap around
avf: reorder AVStream and AVFormatContext
aacdec: Remove erroneous reference to global gain from the out of bounds scalefactor error message.
Conflicts:
libavcodec/indeo3.c
libavformat/avformat.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Must check all 16 bytes because there is a planar 10-bit format
label that has equal first 15 bytes
Review-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Provide a way to wrap around the segment index so pseudostreaming
live through a web server and html5 browser is simpler.
Also ensure that 0 (disable) is a valid value across the options
providing wrap around.
* qatar/master:
avcodec_default_reget_buffer(): fix compilation in DEBUG mode
fate: Overhaul WavPack coverage
h264: fix mmxext chroma deblock to use correct TC values.
flvdec: Remove the now redundant check for known broken metadata creator
flvdec: Validate index entries added from metadata while reading
rtsp: Handle requests from server to client
movenc: use timestamps instead of frame_size for samples-per-packet
movenc: use the first cluster duration as the tfhd default duration
movenc: factorize calculation of cluster duration into a separate function
doc/APIchanges: fill in missing dates and hashes.
lavc: reorder AVCodecContext fields.
lavc: reorder AVFrame fields.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavformat/flvdec.c
libavformat/movenc.c
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
By validating the index entries while reading, we don't need to
seek at startup to validate the entries. If the error in the
index entries is not pointing to (our definition of) the start
of packets, and there is an index entry pointing at some of the
first packets after the metadata, the invalid index can be discarded
almost immediately.
Signed-off-by: Martin Storsjö <martin@martin.st>
This returns 200 OK for OPTIONS requests and 501 Not Implemented
for all other requests.
Even though this doesn't do much actual handling of the requests,
it makes the code properly identify server requests as such, instead
of interpreting it as a reply to the client's request as it did
before.
Signed-off-by: Martin Storsjö <martin@martin.st>
For encoding, AVCodecContext.frame_size is the number of input samples to
send to the encoder and does not necessarily correspond directly to the
timestamps of the output packets.
* qatar/master: (34 commits)
mlp_parser: fix the channel mask value used for the top surround channel
vorbisenc: check all allocations for failure
roqaudioenc: return AVERROR codes instead of -1
roqaudioenc: set correct bit rate
roqaudioenc: use AVCodecContext.frame_size correctly.
roqaudioenc: remove unneeded sample_fmt check
ra144enc: use int16_t* for input samples rather than void*
ra144enc: set AVCodecContext.coded_frame
ra144enc: remove unneeded sample_fmt check
nellymoserenc: set AVCodecContext.coded_frame
nellymoserenc: improve error checking in encode_init()
nellymoserenc: return AVERROR codes instead of -1
libvorbis: improve error checking in oggvorbis_encode_init()
mpegaudioenc: return AVERROR codes instead of -1
libfaac: improve error checking and handling in Faac_encode_init()
avutil: add AVERROR_UNKNOWN
check for coded_frame allocation failure in several audio encoders
audio encoders: do not set coded_frame->key_frame.
g722enc: check for trellis data allocation error
libspeexenc: export encoder delay through AVCodecContext.delay
...
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/fraps.c
libavcodec/kgv1dec.c
libavcodec/libfaac.c
libavcodec/libgsm.c
libavcodec/libvorbis.c
libavcodec/mlp_parser.c
libavcodec/roqaudioenc.c
libavcodec/vorbisenc.c
libavutil/avutil.h
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents certain tags with a default value assigned to them (as per
the EBML syntax elements) from ever being assigned a NULL value. Other
parts of the code rely on these being non-NULL (i.e. they don't check for
NULL before e.g. using the string in strcmp() or similar), and thus in
effect this prevents crashes when reading of such specific tags fails,
either because of low memory or because of targeted file corruption.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
docs: use -bsf:[vas] instead of -[vas]bsf.
mpegaudiodec: Prevent premature clipping of mp3 input buffer.
lavf: move the packet keyframe setting code.
oggenc: free comment header for all codecs
lcl: error out if uncompressed input buffer is smaller than framesize.
mjpeg: abort decoding if packet is too large.
golomb: use HAVE_BITS_REMAINING() macro to prevent infloop on EOF.
get_bits: add HAVE_BITS_REMAINING macro.
lavf/output-example: use new audio encoding API correctly.
lavf/output-example: more proper usage of the new API.
tiff: Prevent overreads in the type_sizes array.
tiff: Make the TIFF_LONG and TIFF_SHORT types unsigned.
apetag: do not leak memory if avio_read() fails
apetag: propagate errors.
SBR DSP x86: implement SSE sbr_hf_g_filt
SBR DSP x86: implement SSE sbr_sum_square_sse
SBR DSP: use intptr_t for the ixh parameter.
Conflicts:
doc/bitstream_filters.texi
doc/examples/muxing.c
doc/ffmpeg.texi
libavcodec/golomb.h
libavcodec/x86/Makefile
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
compute_pkt_fields() is for unreliable estimates or guessing. The
keyframe information from the parser is (at least in theory) reliable,
so it should be used even when the other guessing is disabled with the
AVFMT_FLAG_NOFILLIN flag.
Therefore, move setting the packet keyframe flag based on parser
information from compute_pkt_fields() to read_frame_internal().
fixes a memleak for Vorbis and Theora, where the comment header from
avpriv_split_xiph_headers() is replaced by a buffer that must be freed
separately.
* qatar/master: (40 commits)
swf: check return values for av_get/new_packet().
wavpack: Don't shift minclip/maxclip
rtpenc: Expose the max packet size via an avoption
rtpenc: Move max_packet_size to a context variable
rtpenc: Add an option for not sending RTCP packets
lavc: drop encode() support for video.
snowenc: switch to encode2().
snowenc: don't abuse input picture for storing information.
a64multienc: switch to encode2().
a64multienc: don't write into output buffer when there's no output.
libxvid: switch to encode2().
tiffenc: switch to encode2().
tiffenc: properly forward error codes in encode_frame().
lavc: drop libdirac encoder.
gifenc: switch to encode2().
libvpxenc: switch to encode2().
flashsvenc: switch to encode2().
Remove libpostproc.
lcl: don't overwrite input memory.
swscale: take first/lastline over/underflows into account for MMX.
...
Conflicts:
.gitignore
Makefile
cmdutils.c
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdiracenc.c
libavcodec/libxvidff.c
libavcodec/qtrleenc.c
libavcodec/tiffenc.c
libavcodec/utils.c
libavformat/mov.c
libavformat/movenc.c
libpostproc/Makefile
libpostproc/postprocess.c
libpostproc/postprocess.h
libpostproc/postprocess_altivec_template.c
libpostproc/postprocess_internal.h
libpostproc/postprocess_template.c
libswscale/swscale.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows opting for a lower MTU than what the AVIOContext
indicated, and allows writing into outputs that don't indicate
an MTU at all (such as plain files, which is useful for testing).
This also allows querying for the MTU via the avoption.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to newer RFCs, this packetization scheme should only
be used for interfacing with legacy systems.
Implementing this packetization mode properly requires parsing
the full H263 bitstream to find macroblock boundaries (and knowing
their macroblock and gob numbers and motion vector predictors).
This implementation tries to look for GOB headers (which
can be inserted by using -ps <small number>), but if the GOBs
aren't small enough to fit into the MTU, the packetizer blindly
splits packets at any offset and claims it to be a GOB boundary
(by using Mode A from the RFC). While not correct, this seems
to work with some receivers.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
dxva2: don't check for DXVA_PictureParameters->wDecodedPictureIndex
img2: split muxer and demuxer into separate files
rm: prevent infinite loops for index parsing.
aac: fix infinite loop on end-of-frame with sequence of 1-bits.
mov: Add more HDV and XDCAM FourCCs.
lavf: don't set AVCodecContext.has_b_frames in compute_pkt_fields().
rmdec: when using INT4 deinterleaving, error out if sub_packet_h <= 1.
cdxl: correctly synchronize video timestamps to audio
mlpdec_parser: fix a few channel layouts.
Add channel names to channel_names[] array for channels added in b2890f5
movenc: Buffer the mdat for the initial moov fragment, too
flvdec: Ignore the index if the ignidx flag is set
flvdec: Fix indentation
movdec: Don't parse all fragments if ignidx is set
movdec: Restart parsing root-level atoms at the right spot
prores: use natural integer type for the codebook index
mov: Add support for MPEG2 HDV 720p24 (hdv4)
swscale: K&R formatting cosmetics (part I)
swscale: variable declaration and placement cosmetics
Conflicts:
configure
libavcodec/aacdec.c
libavcodec/mlp_parser.c
libavformat/flvdec.c
libavformat/img2.c
libavformat/isom.h
libavformat/mov.c
libavformat/movenc.c
libswscale/rgb2rgb.c
libswscale/rgb2rgb_template.c
libswscale/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifically, prevent jumping back in the file for the next index, since
this can lead to infinite loops where we jump between indexes referring
to each other, and don't read indexes that don't fit in the file.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
It is not supposed to be done outside lavc.
This is basically a revert of 818062f2f3.
It is unclear what issue this was supposed to fix, if it reappears again
it will have to be fixed in a more proper place.
The wtv-demux test change is because the sample starts with a B-frame.
We read sub_packet_h / 2 packets per line of data (during deinterleaving),
which equals zero if sub_packet_h <= 1, thus causing us to not read any
data, leading to an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This allows writing QuickTime-compatible fragmented mp4 (with
a non-empty moov atom) to a non-seekable output.
This buffers the mdat for the initial fragment just as it does
for all normal fragments, too. Previously, the resulting
atom structure was mdat,moov, moof,mdat ..., while it now
is moov,mdat, moof,mdat.
Signed-off-by: Martin Storsjö <martin@martin.st>
In nonseekable files, we already stop parsing the toplevel atoms
after finding moov and one mdat. In large seekable files (or files
that are seekable, but slowly, e.g. http), reading all the fragments
at the start can take a considerable amount of time. This allows
opting out from this behaviour.
Signed-off-by: Martin Storsjö <martin@martin.st>
If parsing moov+mdat in a non-seekable file, we currently
abort parsing directly after parsing the header of the mdat
atom. If we want to continue parsing later (if looking to
parse later fragments), we need to skip past the content of the
mdat atom, otherwise we end up parsing the content of the mdat
atom as root level atoms.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mpegvideo_enc: only allocate output packet when we know there will be output
Add names for more channel layouts to the channel layout map.
sunrast: Add a sample request for RMP_RAW colormap.
avcodec: do not override pts or duration from the audio encoder
Add prores regression test.
Enable already existing rso regression test.
Add regression test for "sox" format muxer/demuxer.
Add dpx encoding regression test.
swscale: K&R formatting cosmetics for PowerPC code (part I/II)
img2: Use ff_guess_image2_codec(filename) shorthand where appropriate.
Clarify licensing information about files borrowed from libjpeg.
Mark mutable static data const where appropriate.
avplay: fix -threads option
dvbsubdec: avoid undefined signed left shift in RGBA macro
mlpdec: use av_log_ask_for_sample()
gif: K&R formatting cosmetics
png: make .long_name more descriptive
movdec: Adjust keyframe flagging in fragmented files
rv34: change most "int stride" into "ptrdiff_t stride".
Conflicts:
avprobe.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/mpegvideo_enc.c
libavcodec/pngenc.c
libavcodec/x86/v210-init.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_drawtext.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_setpts.c
libavfilter/vf_settb.c
libavformat/img2.c
libavutil/audioconvert.c
tests/codec-regression.sh
tests/lavf-regression.sh
tests/ref/lavf/dpx
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For video, mark the first sample in a trun which doesn't have the
sample-is-non-sync-sample flag set as a keyframe.
In particular, the "sample does not depend on other samples" flag
isn't enough to make it a keyframe, since later frames still can
reference frames prior to that one (the flag only says that that
particular frame doesn't depend on other frames).
This fixes bug 215.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (36 commits)
adpcmenc: Use correct frame_size for Yamaha ADPCM.
avcodec: add ff_samples_to_time_base() convenience function to internal.h
adx parser: set duration
mlp parser: set duration instead of frame_size
gsm parser: set duration
mpegaudio parser: set duration instead of frame_size
(e)ac3 parser: set duration instead of frame_size
flac parser: set duration instead of frame_size
avcodec: add duration field to AVCodecParserContext
avutil: add av_rescale_q_rnd() to allow different rounding
pnmdec: remove useless .pix_fmts
libmp3lame: support float and s32 sample formats
libmp3lame: renaming, rearrangement, alignment, and comments
libmp3lame: use the LAME default bit rate
libmp3lame: use avpriv_mpegaudio_decode_header() for output frame parsing
libmp3lame: cosmetics: remove some pointless comments
libmp3lame: convert some debugging code to av_dlog()
libmp3lame: remove outdated comment.
libmp3lame: do not set coded_frame->key_frame.
libmp3lame: improve error handling in MP3lame_encode_init()
...
Conflicts:
doc/APIchanges
libavcodec/libmp3lame.c
libavcodec/pcxenc.c
libavcodec/pnmdec.c
libavcodec/pnmenc.c
libavcodec/sgienc.c
libavcodec/utils.c
libavformat/hls.c
libavutil/avutil.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The parser was fixed so this workaround should no longer
be necessary.
This allows using stream-copy to fix files with keyframes
incorrectly marked.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This avoids reading any old data in the AVIOContext buffer after
the seek, and indicates to the mpegts demuxer that we've seeked,
avoiding continuity check errors.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
doxy: remove reference to removed api
examples: unbreak compilation
ttadec: cosmetics: reindent
sunrast: use RLE trigger macro inplace of the hard coded value.
sunrastenc: set keyframe flag for the output packet.
mpegvideo_enc: switch to encode2().
mpegvideo_enc: force encoding delay of at least 1 frame when low_delay=0
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Enhance seeking by demuxing until the requested timestamp is
reached within the segment selected by the seek code using the
playlist info.
Some mpegts streams don't have dts set for all packets though,
this seeking method doesn't work well for that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mov: Use defines for sample flags in fragments
mov: Use defines for trun flags
mov: Use defines for tfhd flags
proresenc: force bitrate not to exceed given limit
vc1parse: call vc1_init_common().
wma: don't return 0 on invalid packets.
asf: prevent packet_size_left from going negative if hdrlen > pktlen.
mjpegb: don't return 0 at the end of frame decoding.
rtpdec: Identify incorrectly signalled H263
vp8dsp: split long line.
aiff: don't skip block_align==0 check on COMM-after-SSND files.
dpcm: ignore extra unpaired bytes in stereo streams.
mp3on4: require a minimum framesize.
mpc7: assign an error level + context to av_log() msg.
huffyuv: error out on bit overrun.
dct-test: Add the missing ff_ prefix to the altivec functions
dct-test: Remove a stray declaration of a nonexistent function
movenc: Write the unknown duration as 64 bit fields in ismv
movenc: Write track durations with all bits set if duration is unknown
Conflicts:
libavcodec/dct-test.c
libavcodec/wmadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This prevents failed assertions further down in the packet processing
where we require non-negative values for packet_size_left.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
H263 in RTP can be packetized in two formats (RFC 2190, RFC
2429/4629). The former normally uses the static payload type 34,
while the latter normally uses dynamic payload types with the
SDP format names H263-1998 or H263-2000.
Look for packets that don't look like proper RFC 2190 packets and
switch to depacketizing them according to the new format if they
match some heuristic criteria.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to match Linux behaviour better our
Windows-specific open() replacement should disable
Windows default file locking.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This needs the extradata to be extracted.
The approach used is the one MPlayer uses, though it is
unclear whether the 4 bytes extradata that are skipped
should be skipped always or only for AAC.
The AAC parser must be disabled, too, otherwise playback
still does not work.
Fixes trac issue #547.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (22 commits)
als: prevent infinite loop in zero_remaining().
cook: prevent div-by-zero if channels is zero.
pamenc: switch to encode2().
svq1enc: switch to encode2().
dvenc: switch to encode2().
dpxenc: switch to encode2().
pngenc: switch to encode2().
v210enc: switch to encode2().
xwdenc: switch to encode2().
ttadec: use branchless unsigned-to-signed unfolding
avcodec: add a Sun Rasterfile encoder
sunrast: Move common defines to a new header file.
cdxl: fix video decoding for some files
cdxl: fix audio for some samples
apetag: add proper support for binary tags
ttadec: remove dead code
swscale: make access to filter data conditional on filter type.
swscale: update context offsets after removal of AlpMmxFilter.
prores: initialise encoder and decoder parts only when needed
swscale: make monowhite/black RGB-independent.
...
Conflicts:
Changelog
libavcodec/alsdec.c
libavcodec/dpxenc.c
libavcodec/golomb.h
libavcodec/pamenc.c
libavcodec/pngenc.c
libavformat/img2.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to 14496-12, the duration should be all 1s if
the duration is unknown. This is the case if writing a moov
atom without any samples described in it (e.g. as in ismv files).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows handling matroska files with errors.
Fixes test4.mkv and test7.mkv from the official Matroska test suite.
These are also trac issues #544 and #545.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Muxing pcm audio in MOV using avcodec_encode_audio() was failing
because avcodec_encode_audio() returns an incorrect packet size of 4
bytes. This can be reproduced by modifying the sample
ffmpeg/doc/examples/muxing.c to encode PCM, see ML patch
muxing-test.diff
I git bisected and commit 89ddff92a3 is the one that broke this. In
mov_write_header() if st->codec->frame_size <= 1 it sets it to 1. Then
avcodec_encode_audio() sets frame->nb_samples = avctx->frame_size, and
frame->nb_samples of 1 is used to compute a packet size of 4 bytes.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
shorten: Use separate pointers for the allocated memory for decoded samples.
atrac3: Fix crash in tonal component decoding.
ws_snd1: Fix wrong samples counts.
movenc: Don't set a default sample duration when creating ismv
rtp: Factorize the check for distinguishing RTCP packets from RTP
golomb: avoid infinite loop on all-zero input (or end of buffer).
bethsoftvid: synchronize video timestamps with audio sample rate
bethsoftvid: add audio stream only after getting the first audio packet
bethsoftvid: Set video packet duration instead of accumulating pts.
bethsoftvid: set packet key frame flag for audio and I-frame video packets.
bethsoftvid: fix read_packet() return codes.
bethsoftvid: pass palette in side data instead of in a separate packet.
sdp: Ignore RTCP packets when autodetecting RTP streams
proresenc: initialise 'sign' variable
mpegaudio: replace memcpy by SIMD code
vc1: prevent using last_frame as a reference for I/P first frame.
Conflicts:
libavcodec/atrac3.c
libavcodec/golomb.h
libavcodec/shorten.c
libavcodec/ws-snd1.c
tests/ref/fate/bethsoft-vid
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to unofficial documentation, the video rate is locked to the audio
sample rate. This results in proper synchronization of audio and video
timestamps from the demuxer. This only works if the first audio packet occurs
before the first video packet or the audio sample rate is the default rate of
11111 Hz, both of which are true for all samples in our archive.
This avoids initializing a stream with dummy values or when the file does not
contain audio.
Also set duration for audio packets, using the sample rate as the time base.
Update FATE reference to account for now non-existent palette packet.
This also fixes the FATE test if frame data is not initialized in
get_buffer(), so update comment in avconv accordingly.
The rtp demuxer which listens for RTP packets and detects the
RTP payload type will currently get confused if the first packet
received is an RTCP packet. Thus ignore such packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
Prefix the functions/tables brktimegm, pcm_read_seek,
dv_offset_reset, voc_get_packet, codec_movaudio_tags,
codec_movvideo_tags.
After this, lavf has no global symbols without the proper prefix.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (21 commits)
CDXL demuxer and decoder
hls: Re-add legacy applehttp name to preserve interface compatibility.
hlsproto: Rename the functions and context
hlsproto: Encourage users to try the hls demuxer instead of the proto
doc: Move the hls protocol section into the right place
libavformat: Rename the applehttp protocol to hls
hls: Rename the functions and context
libavformat: Rename the applehttp demuxer to hls
rtpdec: Support H263 in RFC 2190 format
rv30: check block type validity
ttadec: CRC checking
movenc: Support muxing VC1
avconv: Don't split out inline sequence headers when stream copying VC1
rv34: handle size changes during frame multithreading
rv40: prevent undefined signed overflow in rv40_loop_filter()
rv34: use AVERROR return values in ff_rv34_decode_frame()
rv34: use uint16_t for RV34DecContext.deblock_coefs
librtmp: Add "lib" prefix to librtmp URLProtocol declarations.
movenc: Use defines instead of hardcoded numbers for RTCP types
smjpegdec: implement seeking
...
Conflicts:
Changelog
doc/general.texi
libavcodec/avcodec.h
libavcodec/rv30.c
libavcodec/tta.c
libavcodec/version.h
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Keep the old protocol name around for backwards compatibility
until the next bump.
Deprecate the method of implicitly assuming the nested protocol.
For applehttp://server/path, it might have felt logical, but
supporting hls://server/path isn't quite as intuitive. Therefore
only support hls+http://server/path from now on.
Using this protocol at all is discouraged, since the hls demuxer
is more complete and fits into the architecture better. There
have been cases where the protocol implementation worked better
than the demuxer, but this should no longer be the case.
Signed-off-by: Martin Storsjö <martin@martin.st>
When this demuxer was created, there didn't seem to be any
consensus of a common short name for this protocol. Now
the consensus seems to be to call it hls.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is different from the "modern" RTP payload formats for H263
as defined by RFC 4629, 2429 and 3555. According to the newer RFCs,
this old one is to be considered deprecated and only be used for
interoperating with legacy systems.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows easily differentiating between both implementations within the build
system and combining the native implementation for plain RTMP with librtmp for
the RTMPE, RTMPS, RTMPT, RTMPTE protocol variants.
* qatar/master:
rtpdec: Use 4 byte startcodes for H.264
matroskadec: Mark variable as av_unused.
Move some conditionally used variables into the block where they are used.
Drop some completely unnecessary av_unused attributes.
swscale: Remove unused variable alpMmxFilter.
Drop unnecessary av_uninit attributes from some variable declarations.
movenc: Support muxing wmapro in ismv/isma
mpegtsenc: Add an AVOption for forcing a new PAT/PMT/SDT to be written
swscale: move YUV2PACKED16WRAPPER() macro down to where it is used.
swscale: handle gray16 as a "planar" YUV format (Y-only, of course).
swscale: use yuv2packed1() functions for unscaled chroma also.
swscale: fix incorrect chroma bias in yuv2rgb48_1_c().
swscale: fix invalid memory accesses in yuvpacked1() functions.
Move PS2 MMI code below the mips subdirectory, where it belongs.
mips: Move MMI function declarations to a header.
build: Set correct dependencies for rtmp* protocols implemented by librtmp.
Conflicts:
libavcodec/ac3enc_template.c
libavformat/mpegtsenc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If muxing into mpegts, 4 byte startcodes for the first NAL
of an access unit is required. Thus it is simplest for the
RTP depacketizer to just use 4 byte startcodes everywhere.
Signed-off-by: Martin Storsjö <martin@martin.st>
In particular, detect when the index is obviously broken.
This fixes the worst symptoms of trac issue #958 and makes
sense to allow seeking in files without index.
However it is possible that there still is an index parsing bug
with that file.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Otherwise when we run into levels beyond the max. allowed
playback will be permanently broken.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
When segmenting the output from the mpegts muxer, one can
now set this option when cutting to a new segment, to make sure
the next segment starts with PAT/PMT/SDT.
Signed-off-by: Martin Storsjö <martin@martin.st>
To make seeking work correctly, we must write a new granule for
each keyframe.
Unfortunately we currently have no regression tests due to no
included Theora encoder.
A test based on -vcodec copy from a Theora FATE sample should
probably be added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This is so that TS fragments produced by
http://code.google.com/p/httpsegmenter/
would be compatible with JW Player.
A new member variable prev_payload_key was added to MpegTSWriteStream
to help detect transition from non-key to key frame, so that
PAT/PMT would not be produced for every keyframe in intra-only videos.
Signed-off-by: Pavel Koshevoy <pkoshevoy@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (38 commits)
v210enc: remove redundant check for pix_fmt
wavpack: allow user to disable CRC checking
v210enc: Use Bytestream2 functions
cafdec: Check return value of avio_seek and avoid modifying state if it fails
yop: Check return value of avio_seek and avoid modifying state if it fails
tta: Check return value of avio_seek and avoid modifying state if it fails
tmv: Check return value of avio_seek and avoid modifying state if it fails
r3d: Check return value of avio_seek and avoid modifying state if it fails
nsvdec: Check return value of avio_seek and avoid modifying state if it fails
mpc8: Check return value of avio_seek and avoid modifying state if it fails
jvdec: Check return value of avio_seek and avoid modifying state if it fails
filmstripdec: Check return value of avio_seek and avoid modifying state if it fails
ffmdec: Check return value of avio_seek and avoid modifying state if it fails
dv: Check return value of avio_seek and avoid modifying state if it fails
bink: Check return value of avio_seek and avoid modifying state if it fails
Check AVCodec.pix_fmts in avcodec_open2()
svq3: Prevent illegal reads while parsing extradata.
remove ParseContext1
vc1: use ff_parse_close
mpegvideo parser: move specific fields into private context
...
Conflicts:
libavcodec/4xm.c
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/mpeg4video_parser.c
libavcodec/svq3.c
libavcodec/v210enc.c
libavformat/cafdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
eac3dec: replace undefined 1<<31 with INT32_MIN in noise generation
yadif: specify array size outside DECLARE_ALIGNED
prores: specify array size outside DECLARE_ALIGNED brackets.
WavPack demuxer: set packet duration
tta: use skip_bits_long()
mxfdec: Ignore the last entry in Avid's index table segments
mxfdec: Sanity-check SampleRate
mxfdec: Handle small EditUnitByteCount
mxfdec: Consider OPAtom files that do not have exactly one EC to be OP1a
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check eof_reached in mxf_read_local_tags()
mxfdec: Check for NULL component
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Make sure x < index_table->nb_ptses
build: Add missing directories to DIRS declarations.
...
Conflicts:
doc/build_system.txt
doc/fate.texi
libavfilter/x86/yadif_template.c
libavformat/mxfdec.c
libavutil/Makefile
tests/fate/audio.mak
tests/fate/prores.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/ref/fate/bethsoft-vid
tests/ref/fate/cscd
tests/ref/fate/dfa4
tests/ref/fate/nuv
tests/ref/fate/vp8-sign-bias
tests/ref/fate/wmv8-drm
tests/ref/lavf/gxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though
segments like these are expected.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
These are common with audio atoms. Without this the demuxer would read two
bytes at a time for a mono 16-bit file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend
past the end of the set and not allowing other KLVs to be read past
the end of themselves.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This can happen if an index table segment has a very large IndexStartPosition.
zzuf3.mxf is an example of such a file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Only the OPAtom demuxing logic is guaranteed to have index tables,
meaning OP1a files that lack an index would cause SIGSEGV.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
Revert "v210enc: use FFALIGN()"
doxygen: Do not include license boilerplates in Doxygen comment blocks.
avplay: reset decoder flush state when seeking
ape: skip packets with invalid size
ape: calculate final packet size instead of guessing
ape: stop reading after the last frame has been read
ape: return AVERROR_EOF instead of AVERROR(EIO) when demuxing is finished
ape: return error if seeking to the current packet fails in ape_read_packet()
avcodec: Clarify AVFrame member documentation.
v210dec: check for coded_frame allocation failure
v210enc: use stride as it is already calculated
v210enc: use FFALIGN()
v210enc: return proper AVERROR codes instead of -1
v210enc: do not set coded_frame->key_frame
v210enc: check for coded_frame allocation failure
drawtext: add 'fix_bounds' option on coords fixing
drawtext: fix text_{w, h} expression vars
drawtext: add missing braces around an if() block.
Conflicts:
libavcodec/arm/vp8.h
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/v210dec.c
libavfilter/vf_drawtext.c
libavformat/ape.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A lot of files do not mark keyframes correctly via
granule, so detect keyframe or not based on data
and complain if it mismatches.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Calculates based on total file size and wavetaillength from the header.
Falls back to multiplying finalframeblocks by 8 instead of 4 so that it will
at least be overestimating for 24-bit. Currently it can underestimate the
final packet size, leading to decoding errors.
It would never be called when the searched-for position
was already in the index.
In the other cases, the ogg_reset at the end of the
read_timestamp function handled it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
In this case, the pts values will be delayed by one, but
at the same time pts values might only be supplied for e.g.
keyframes.
This results on only the frame after the keyframe having a
pts value.
As a hack, make read_timestamp return the keyframe position
together with the pts from a following frame when seeking
to a keyframe.
Fixes trac issue #438.
However it causes the read_timestamp function to return a
pos value that is actually before the packet with the
indicated pts.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
We can handle v4 just fine, the parts we currently use
are the same for v3 and v4.
v4 can in addition contain an index which we so far do
not use though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Fixes trac issue #438.
Seeking in that sample would cause ogg_read_timestamp to fail
because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
* qatar/master:
libx264: fix indentation.
vorbis: fix overflows in floor1[] vector and inverse db table index.
win64: add a XMM clobber test configure option.
movdec: Parse the dvc1 atom
ARM: ac3: fix ac3_bit_alloc_calc_bap_armv6
swscale: K&R formatting cosmetics for Blackfin code
frwu: lowercase the FRWU codec name
movdec: fix dts generation in fragmented files
fate: make acodec-ac3_fixed test output raw AC3
APIchanges: add missing commit hashes
swscale: implement MMX, SSE2 and AVX functions for RGB32 input.
ra144enc: drop pointless "encoder" from .long_name
bethsoftvideo: fix palette reading.
mpc7: use av_fast_padded_malloc()
mpc7: simplify handling of packet sizes that are not a multiple of 4 bytes
doc: decoding Forward Uncompressed is supported
Fix a typo in the x86 asm version of ff_vector_clip_int32()
pcmenc: Do not set avpkt->size.
ff_alloc_packet: modify the size of the packet to match the requested size
Conflicts:
doc/APIchanges
libavcodec/libx264.c
libavcodec/mpc7.c
libavformat/isom.h
libswscale/Makefile
libswscale/bfin/yuv2rgb_bfin.c
tests/ref/fate/bethsoft-vid
tests/ref/seek/ac3_ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Normally, the actual payload data contains sequence headers, too,
and the parser can extract this and set it as extradata. However,
the data in the dvc1 atom is the "official" extradata for the file.
This is required for proper stream copy of vc1 from ismv to ismv.
Signed-off-by: Martin Storsjö <martin@martin.st>
Do not use AVStream's duration for dts generation since it contains in
some cases the duration of the whole file instead of duration of the
samples in the moov. This happens if the mdhd holds the duration of the
whole file but has no entries or a zero duration in its stts.
