Mans Rullgard
add8f5eab7
fate: simplify variable setting filter.mak
...
This removes some needless indirection and duplication.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-08-06 10:19:27 +01:00
Mans Rullgard
73486e3b61
fate: force pix_fmt in lagarith-rgb32 test
...
This makes big and little endian systems use the same output
format.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-08-04 14:15:45 +01:00
Ronald S. Bultje
c5d5d17880
fate: add tests for lagarith lossless video codec.
...
Based on patch by Oana Stratulat <oanaandreeastratulat@gmail.com>.
2012-08-03 20:48:34 -07:00
Mans Rullgard
70c8753d33
fate: amix: specify f32 sample format for comparison
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-29 22:05:09 +01:00
Mans Rullgard
9f1280def4
tiny_psnr: support 32-bit float samples
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-29 22:05:09 +01:00
Anton Khirnov
aba232cfa9
lavf: deprecate r_frame_rate.
...
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
2012-07-29 08:06:30 +02:00
Anton Khirnov
fe1c1198e6
lavf: use dts difference instead of AVPacket.duration in find_stream_info()
...
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
2012-07-29 08:04:42 +02:00
Mans Rullgard
d905c64406
fate: make yadif tests consistent across systems
...
MMX-enabled systems by default use some dsputil functions differing
from the C versions. Adding these flags ensures accurate ones are
used everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-28 22:23:52 +01:00
Anton Khirnov
8f9537f314
FATE: add tests for yadif.
2012-07-28 14:33:44 +02:00
Anton Khirnov
8112710f17
FATE: add a test for delogo video filter.
2012-07-28 14:33:32 +02:00
Anton Khirnov
7339340787
FATE: add a test for amix audio filter.
2012-07-28 14:32:53 +02:00
Anton Khirnov
67ef5f4eb5
audiogen: allow specifying random seed as a commandline parameter.
2012-07-28 14:32:48 +02:00
Mans Rullgard
b9d3c37848
build: use COMPILE template for HOSTOBJS
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-26 23:58:59 +01:00
Mashiat Sarker Shakkhar
8d2e3fee0b
vc1: Add a test for interlaced field pictures
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2012-07-22 22:28:30 -04:00
Anton Khirnov
df53a4a7c1
FATE: fix the asyncts test
...
Nellymoser is float, so use oneoff comparison instead of md5.
2012-07-22 17:58:56 +02:00
Anton Khirnov
73cd131ebc
FATE: add a test for the asyncts audio filter.
2012-07-22 10:14:16 +02:00
Anton Khirnov
5eb9c495af
FATE: add a test for flac cover art.
2012-07-20 10:17:25 +02:00
Janne Grunau
2d497c141d
eval: add gt(), gte(), lt() and lte() fate tests
2012-07-14 13:43:10 +02:00
Max Lazarov
caac3ab6ef
eval: fix swapping of lt() and lte()
...
CC: libav-stable@libav.org
2012-07-14 13:33:25 +02:00
Anton Khirnov
8d18bc550e
fate-run: make avconv() properly deal with multiple inputs.
2012-07-09 08:22:38 +02:00
Mans Rullgard
7c29377b70
lavfi: reclassify showfiltfmts as a TESTPROG
...
This tool uses lavfi internal symbols not accessible in shared
libraries. TESTPROGS are linked statically to allow them use of
library internals not normally exported.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-04 17:48:25 +01:00
Samuel Pitoiset
8c14f7a593
Add XTEA encryption support in libavutil
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-07-04 15:10:57 +03:00
Samuel Pitoiset
bc3dbcc8e5
Add Blowfish encryption support in libavutil
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-07-04 15:10:57 +03:00
Martin Storsjö
143f1e9203
eval: Add the isinf() function and tests for it
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-07-04 15:10:56 +03:00
Anton Khirnov
1c840fa227
FATE: add a test for WMA cover art.
2012-07-04 05:59:14 +02:00
Anton Khirnov
8059d3b7d4
FATE: add a test for apetag cover art
2012-07-04 05:59:05 +02:00
Anton Khirnov
bf2a7f9161
FATE: add a test for itunes cover art.
2012-07-04 05:58:47 +02:00
Mans Rullgard
983fa8bc46
fate: add flac encode/decode tests with various options
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-07-04 01:22:40 +01:00
Alex Converse
a112822597
movenc: Add channel layouts for PCM.
2012-06-27 13:47:58 -07:00
Mans Rullgard
7457ebee3a
fate: vorbis: add 5.1 surround test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-06-18 11:47:08 +01:00
Mans Rullgard
16b8525963
fate: add snow hpel tests
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2012-06-15 19:10:58 +02:00
Diego Biurrun
a488028362
build: Do not delete tests/vsynth2 directory, which is no longer created.
2012-06-13 12:27:49 +02:00
Mans Rullgard
d0e9415d23
fate: avoid freopen(NULL) in videogen/rotozoom
...
A number of systems do not implement freopen() with a NULL filename
correctly. This changes these programs to output individual images
if opening a named output argument as a file fails, in this case
assuming it is a directory.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-06-07 11:28:39 +01:00
Alex Converse
41e9682af2
movenc: Write chan atom for all audio tracks in mov mode movies.
2012-06-04 10:08:31 -07:00
Michael Niedermayer
0fcf3013c4
fate: Fix fate-ac3-fixed-encode for pre-ssse3 x86 machines
...
The default mmxext and sse implementations of apply_window_int16
aren't bitexact.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-05-31 00:01:04 +03:00
Mans Rullgard
0857e46dd5
fate: add missing $(TARGET_PATH) to ac3-fixed-encode
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-30 07:55:13 +01:00
Mans Rullgard
00c78a0a15
fate: fix md5sum replacement on some systems
...
On systems where the 'md5' command is used, there is a conflict
with the md5() shell function in fate-run.sh. Using the 'command'
keyword bypasses the shell function for correct behaviour.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-30 07:52:35 +01:00
Anton Khirnov
8daf21d567
avconv: merge configuration code for complex and simple filters
...
Some tests change because -s now inserts the scaler to the end instead
of beginning of the filtergraph.
2012-05-29 19:19:16 +02:00
Mans Rullgard
f919cc7df6
fate: fix acodec/vsynth tests for make 3.81
...
GNU make 3.81 applies pattern rules in declaration order rather than
by stem length as in 3.82. This moves the more generic patterns above
the more specific ones such that they work with either make version.
Some of the vsynth patterns are also simplified a little.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-29 17:49:44 +01:00
Mans Rullgard
7263cd5544
fate: convert codec-regression.sh to makefile rules
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-29 08:35:41 +01:00
Mans Rullgard
47b5996bb0
fate: allow tests to specify unit size for psnr comparison
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-29 08:27:19 +01:00
Mans Rullgard
7e5880e0cb
fate: teach videogen/rotozoom to output a single raw video stream
...
This makes videogen/rotozoom output a raw video stream on stdout
if no output directory is specified.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-29 08:27:19 +01:00
Mans Rullgard
4852cb37ce
fate: fix dependencies for non-SAMPLES avconv tests
...
The encode/decode tests should all depend on avconv. Since
avconv requires libavfilter, there is no need to enable those
tests selectively.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-20 12:54:31 +01:00
Mans Rullgard
68aef0b481
lavf: change some (de)muxer names to lowercase
...
This is consistent with other format names.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-19 19:44:16 +01:00
Mans Rullgard
63dcd16d56
fate: fix dependencies on SAMPLES being set
...
This allows fate to run without errors with or without SAMPLES
being set.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-19 14:30:41 +01:00
Mans Rullgard
8ccc1c5975
fate: remove unnecessary libavfilter dependency
...
avconv now requires libavfilter so this dependency is redundant.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-19 14:25:00 +01:00
Anton Khirnov
74b961db77
avconv: replace -vsync cfr code with the fps filter.
...
Invented timestamps for the h264 tests return to something resembling
sanity.
In the idroq-video-encode test when converting 25 fps -> 30 fps the
fifth frame gets duplicated instead of the sixth.
2012-05-18 19:38:40 +02:00
Anton Khirnov
755cd4197d
mov: enable parsing for VC-1.
...
This makes lavf discard broken timestamps for non-B frames in
samples/isom/vc1-wmapro.ism.
2012-05-18 19:38:21 +02:00
Diego Biurrun
1afc278994
fate: Set FUZZ factor of vorbis-13 test to 2.
...
This is necessary to account for different rounding done in the 3DNow!
Assembly optimizations.
2012-05-18 16:08:41 +02:00
Diego Biurrun
4cc8e15371
fate: Set FUZZ factor of (e)ac3-encode test to 3.
...
This is necessary to account for different rounding done in the 3DNow!
Assembly optimizations.
2012-05-18 16:08:40 +02:00
Mans Rullgard
ab5c38ec45
fate: remove unused code from regressions-funcs.sh
...
The only uses of the do_avconv_nomd5() function were removed in
85cf49f
.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-18 14:00:36 +01:00
Mans Rullgard
7d7b40f48a
pcmenc: set correct bitrate value
...
This fixes a bogus bitrate value in the header of WAV files with
alaw/ulaw audio.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-17 02:34:57 +01:00
Anton Khirnov
d894752387
avprobe: don't print format entry name when only one was requested
...
This is easier to parse with automated tools.
2012-05-16 18:35:05 +02:00
Martin Storsjö
6ce51a9b39
fate: Work around non-standard wc implementations at more places
...
This applies the same fix as in ed7409fe9d
for lavf-regressions.sh.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-05-16 14:48:58 +03:00
Mans Rullgard
ed7409fe9d
fate: work around non-standard wc implementations
...
On some systems, the wc command prints spaces before the first
number causing mismatches with the test references. Using the
output of wc as arguments to echo removes any extra whitespace.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-16 03:04:53 +01:00
Mans Rullgard
11e33402ca
fate: use standard diff options
...
diff -w is not a standard option. This fixes the reference files
to match what the tests actually output and switches to using the
standard diff -b which is sufficient to handle different line ending
styles.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-15 19:47:18 +01:00
Mans Rullgard
6d042f7989
fate: rename psx-str-v3-mdec to mdec-v3
...
This name better reflects that it is v3 of mdec that is tested.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-15 15:49:56 +01:00
Mans Rullgard
c68adc7b2f
fate: convert psx-str to a demuxer test
...
While these codecs are covered elsewhere, the container is different
from the other psx-str file.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-15 15:49:56 +01:00
Mans Rullgard
0ff0af731c
fate: use diff -b in oneline comparison
...
This is simpler and should take care of any problems with mixed
line ending styles.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-15 15:23:34 +01:00
Mans Rullgard
7abf789975
fate: make smjpeg a demux test
...
These codecs are covered elsewhere so make this a pure demux test.
Also rename it accordingly.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-15 00:03:40 +01:00
Mans Rullgard
b1c1d7dae7
fate: separate sierra-vmd audio and video tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 21:38:28 +01:00
Mans Rullgard
0b1c868508
fate: separate smacker audio and video tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 21:38:28 +01:00
Anton Khirnov
369cb092ec
avconv: add support for audio filters.
...
The FATE changes are all off-by-one due to different rounding being used
(lrintf vs av_rescale_q).
2012-05-14 21:36:11 +02:00
Mans Rullgard
7c6d240665
mtv: do not byteswap raw video in demuxer
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 20:26:39 +01:00
Mans Rullgard
09a35f251a
fate: westwood-aud: disable decoding
...
The codec (adpcm-ima-ws) is tested elsewhere. Using framecrc output
provides more information than a single md5 if something goes wrong.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:06:05 +01:00
Mans Rullgard
f70d91e268
fate: caf: disable decoding
...
This is intended as a demuxer test and the file contains pcm_s16be
audio which is tested elsewhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:05:30 +01:00
Mans Rullgard
b809991a31
fate: film-cvid: drop pcm audio and rename test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:05:07 +01:00
Mans Rullgard
0bbb330ee3
fate: d-cinema-demux: drop unnecessary flags
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:04:20 +01:00
Mans Rullgard
cd7b82c5d1
fate: split off dpcm-interplay from interplay-mve tests
...
These two files use the same audio codec so only one test for
this is needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:02:02 +01:00
Mans Rullgard
838521e110
fate: rename funcom-iss to adpcm-ima-iss
...
This matches the name of the codec.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:01:01 +01:00
Mans Rullgard
9656b7f2ae
fate: rename cryo-apc to adpcm-ima-apc
...
This matches the name of the tested codec.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 13:00:26 +01:00
Mans Rullgard
773459e757
fate: rename adpcm-psx-str-v3 to adpcm-xa
...
This matches the name of the codec tested.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:56:06 +01:00
Mans Rullgard
6a64ff74fe
fate: split off adpcm-ms-mono test from dxa-feeble
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:55:47 +01:00
Mans Rullgard
95939bf565
fate: split off adpcm-ima-ws test from vqa-cc
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:55:33 +01:00
Mans Rullgard
88ae6178b1
fate: add adpcm-ima-smjpeg test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:54:34 +01:00
Mans Rullgard
cb0713fca2
fate: split off adpcm-ima-amv from amv test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:53:46 +01:00
Mans Rullgard
35d88a86e3
fate: separate bmv audio and video tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:51:59 +01:00
Mans Rullgard
bd7ac952b1
fate: separate delphine-cin audio and video tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:51:31 +01:00
Mans Rullgard
f4d2b93be4
fate: truemotion1: disable audio
...
These tests include adpcm-ima-dk3 audio which is tested elsewhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:51:19 +01:00
Mans Rullgard
63322d8c89
fate: qtrle: disable audio in all tests
...
These files contain mace6 audio which is tested elsewhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:50:19 +01:00
Mans Rullgard
0c26380f4f
fate: pcm-planar: disable video
...
This file has eamad video which is tested elsewhere.
Also rename the test to reflect this change.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:50:01 +01:00
Mans Rullgard
1c0e8b94ad
fate: mtv: disable video decoding
...
This test contains raw rgb565le video. Converting to rgb24 serves
no useful purpose here.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-14 12:49:42 +01:00
Diego Biurrun
ec2dbec84d
fate: employ better names and add a convenient shorthand for vp6 tests
2012-05-11 10:50:28 +02:00
Mans Rullgard
4f1500689d
avconv: use lrint() for rounding double timestamps
...
Converting the double to float for lrintf() loses precision when
the value is not exactly representable as a single-precision float.
Apart from being inaccurate, this causes discrepancies in some
configurations due to differences in rounding.
Note that the changed timestamp in the vc1-ism test is a bogus,
made-up value.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-10 22:54:27 +01:00
Diego Biurrun
454b1f9b58
fate: cosmetics: lowercase some comments
2012-05-09 18:12:28 +02:00
Diego Biurrun
7ac4bde22a
fate: Give more consistent names to some RealVideo/RealAudio tests.
2012-05-09 18:12:27 +02:00
Mans Rullgard
b1f9be5436
fate: split idroq audio and video into separate tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-09 14:13:34 +01:00
Mans Rullgard
f7c2dca0d9
fate: improve dependencies
...
This makes only tests actually using avconv depend on it.
The remaining tests already depend on what they need.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-09 14:13:34 +01:00
Diego Biurrun
63e01c2f19
fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-09 14:13:34 +01:00
Diego Biurrun
f2a5586c64
fate: split some combined tests into separate audio and video tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-09 14:13:34 +01:00
Mans Rullgard
d57b43df2e
fate: fix dependencies for probe tests
...
Only the probe tests should depend on avprobe and these should
be enabled only if avprobe is configured.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-05-09 13:48:58 +01:00
Alex Converse
fa8fc3b73a
fate: Change the probe-format refs to match the final text format committed.
2012-05-07 11:01:38 -07:00
Alex Converse
6345209a7d
fate: Add avprobe as a make dependency
2012-05-07 11:00:54 -07:00
Ronald S. Bultje
4bfa67bdad
Add probe fate tests to test for regressions in detecting media types.
...
Signed-off-by: Alex Converse <alex.converse@gmail.com>
2012-05-07 10:14:51 -07:00
Mans Rullgard
40fa14f775
fate: Add oneline comparison method
...
Signed-off-by: Alex Converse <alex.converse@gmail.com>
2012-05-07 10:14:50 -07:00
Sean McGovern
be6009d32c
tests/utils: don't ignore the return value of fwrite()
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2012-05-06 17:44:59 +02:00
Diego Biurrun
f0ccd53a3b
tests: Refactor rotozoom/videogen common code into a separate file.
2012-05-05 17:11:06 +02:00
Diego Biurrun
814208a7a6
tests: Mark some file-internal symbols as static.
2012-05-05 16:32:57 +02:00
Mans Rullgard
b6a6e90a7c
fft-test: add option to set cpuflag mask
...
This can be useful for testing.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-04-25 23:19:40 +01:00
Justin Ruggles
394dbde548
FATE: use updated reference for aac-latm_stereo_to_51
...
This uses correct stereo to 5.1 upmixing via libavresample.
2012-04-24 23:38:54 -04:00
Justin Ruggles
c5671aeb77
FATE: avoid channel mixing in lavf-dv_fmt
...
This partially reverts acb1730218
which would only have needed to change the checksums if channel mixing had
been properly avoided. This changes the output file size reference and the
seek test reference back to the previous values.
2012-04-24 15:55:45 -04:00
Dale Curtis
8336eb6f85
matroska: Add incremental parsing of clusters.
...
Reduces the amount of upfront data required for cluster parsing
thus decreasing latency on seek and startup.
The change in the seek-lavf_mkv FATE test is due to incremental
parsing no longer reading as much data as the old parser and
thus not having that additional data to generate index entries
based on keyframes. Index entries are added correctly as the
file is parsed.
All FATE tests pass and Chrome has been using this patch for ~6
months without issue.
Currently incremental parsing is not supported for files with
SSA tracks since they require merging packets between clusters.
In this case the code falls back to non-incremental parsing.
Signed-off-by: Aaron Colwell <acolwell@chromium.org>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2012-04-22 17:23:50 -07:00
Justin Ruggles
acb1730218
FATE: allow lavf tests to alter input parameters
...
Change some lavf tests to avoid resampling and channel mixing.
2012-04-20 10:23:57 -04:00
Justin Ruggles
5052980400
FATE: replace the acodec-pcm_s24daud test with an enc_dec_pcm checksum test
...
This avoids resampling and channel mixing by using a source with
the correct channel layout and sample rate.
2012-04-20 10:23:57 -04:00
Justin Ruggles
03caef1bed
FATE: replace the acodec-g726 test with 4 new encode/decode tests
...
Avoids resampling and channel mixing. This only tests the behavior
with respect to input and output audio rather than also testing changes
to the encoder or muxer that do not affect the resulting decoded output.
2012-04-20 10:23:57 -04:00
Justin Ruggles
a6c8cca2a8
FATE: replace current g722 encoding tests with an encode/decode test
...
Avoids resampling and channel mixing. This only tests the behavior
with respect to input and output audio rather than also testing changes
to the encoder or muxer that do not affect the resulting decoded output.
2012-04-20 10:23:57 -04:00
Justin Ruggles
870165e217
FATE: add a pattern rule for generating asynth wav files
2012-04-20 10:23:57 -04:00
Justin Ruggles
010943c6ce
FATE: optionally write a WAVE header in audiogen
2012-04-20 10:23:57 -04:00
Justin Ruggles
9cc338b1de
FATE: pass the decoded output format and audio source file to enc_dec_pcm
...
This will allow decoding to md5 and doing a diff comparison to a reference
checksum instead of a fuzzy stddev or oneoff comparison.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-04-18 22:26:56 -04:00
Justin Ruggles
c755b1fbbc
FATE: specify the input format when decoding in enc_dec_pcm()
...
The output format is not always the same as the file extension,
which is sometimes required for correct probing. We can avoid
probing by specifying the format since it is already known.
2012-04-18 22:26:49 -04:00
Anton Khirnov
b7327887ea
avconv: get output pixel format from lavfi.
...
This way we don't require a clearly defined corresponding input stream.
The result for the xwd test changes because rgb24 is now chosen instead
of bgra.
2012-04-15 20:22:36 +02:00
Justin Ruggles
d3c59d5003
avconv: use default channel layouts when they are unknown
...
If either input or output layout is known and the channel counts match,
use the known layout for both. Otherwise choose the default layout based on
av_get_default_channel_layout().
Changed some FATE references due to some WAVE files now having a non-zero
channel mask.
2012-04-10 11:30:01 -04:00
Ronald S. Bultje
7756859a31
fate: add BMP tests.
2012-04-04 11:16:23 -07:00
Derek Buitenhuis
0aaa45ef69
FATE: Add RALF decoding test
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2012-04-01 15:56:08 -04:00
Anton Khirnov
e2e165c00f
FATE: add a test for vp8 with changing frame size.
2012-03-28 09:28:29 +02:00
Ronald S. Bultje
e74d6daa29
fate: add kgv1 fate test.
...
Tested to be bit-exact across x86-64, x86-32 and ppc.
2012-03-27 17:54:04 -07:00
Ronald S. Bultje
7beec7e29d
fate: add wmalossless test.
2012-03-23 14:03:03 -07:00
Derek Buitenhuis
e9c0b12c2e
FATE: Add ZeroCodec test
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2012-03-22 19:52:56 +01:00
Justin Ruggles
b0f75ba272
mpegaudioenc: use AVCodec.encode2()
...
Update FATE references due to encoder delay.
2012-03-20 18:56:22 -04:00
Justin Ruggles
bb03b6f7b1
g722enc: use AVCodec.encode2()
...
FATE reference updated due timestamp rounding because of resampling from
44100 Hz to 16000 Hz in avconv.
2012-03-20 18:47:23 -04:00
Justin Ruggles
aa872af5e3
ac3enc: update to AVCodec.encode2()
...
Update FATE references due to encoder delay.
2012-03-20 18:46:56 -04:00
Justin Ruggles
e056f8d37d
FATE: use +/- flag option syntax for vp8 emu-edge tests
2012-03-20 15:51:58 -04:00
Justin Ruggles
9b9fc9ba32
avconv: pass input stream timestamps to audio encoders
...
5 FATE test references updated due to using demuxer-generated timestamps that
are either not sample-accurate or are slightly off in the input file.
2012-03-20 14:12:54 -04:00
Justin Ruggles
cd2ffb67ad
xa: fix timestamp calculation
...
The packet duration is always 28 samples.
2012-03-20 14:12:53 -04:00
Paul B Mahol
791d6df4ae
FATE: change fate-maxis-xa to a normal demuxing test
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-03-19 17:17:54 -04:00
Paul B Mahol
b36872bdb6
FATE: add test for adpcm-ea-maxis-xa
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-03-19 17:15:54 -04:00
Ronald S. Bultje
c346f6304c
adpcm: fix nb_samples rounding for adpcm_ima_dk3, and update reference.
2012-03-18 15:25:25 -07:00
Mans Rullgard
a56fba502e
fate: make compare() function compatible with POSIX bc
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-03-18 18:40:59 +00:00
Mans Rullgard
b1740cb00a
fate: fix enc_dec_pcm tests with remote target
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-03-17 17:28:33 +00:00
Justin Ruggles
85cf49fab7
FATE: remove WMA acodec tests
2012-03-17 11:46:15 -04:00
Justin Ruggles
3a1e453e54
FATE: add WMAv1 and WMAv2 encode/decode tests with fuzzy comparison
2012-03-17 11:33:35 -04:00
Justin Ruggles
a4cf4ef256
FATE: add AC-3 and E-AC-3 encode/decode tests with fuzzy comparison
2012-03-17 11:33:35 -04:00
Justin Ruggles
90e5b58a53
FATE: add capability for audio encode/decode tests with fuzzy psnr comparison
...
This allows for testing floating-point audio encoders across different
platforms where exact comparisons are unreliable due to float rounding
differences.
2012-03-15 17:06:17 -04:00
Justin Ruggles
cffd7580bb
FATE: allow a tolerance in the size comparison in do_tiny_psnr()
...
This will allow for comparing decoded output to the original source when the
decoded size is not exactly the same as the original size.
2012-03-15 14:40:31 -04:00
Justin Ruggles
bb6842966e
FATE: use absolute difference from a target value in do_tiny_psnr()
...
This will allow comparison to original pre-encoded content instead of
comparing to expected decoded output.
2012-03-15 14:40:31 -04:00
Justin Ruggles
5ecadc6620
FATE: allow tests to set CMP_SHIFT to pass to tiny_psnr
...
This will allow adjusting for any encoder or decoder delay when doing
comparisons.
2012-03-15 14:40:24 -04:00
Justin Ruggles
0720d263ea
FATE: use $fuzz directly in do_tiny_psnr() instead of passing it around
2012-03-15 12:06:56 -04:00
Paul B Mahol
92a02d935b
Add ffvhuff encoding and decoding regression test
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-03-14 13:24:17 -07:00
Paul B Mahol
05e0061ef6
fate: add pam image regression test
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2012-03-14 15:34:50 +01:00
Paul B Mahol
6efe180782
FATE: add shorthand to wavpack test
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-03-12 21:47:47 -07:00
Paul B Mahol
5a877d9530
FATE: add test for cdxl demuxer
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-03-12 17:01:58 +02:00
Anton Khirnov
018f39ef49
FATE: add CPUFLAGS variable, mapping to -cpuflags avconv option.
2012-03-06 15:03:36 +01:00
Justin Ruggles
6c65cf58fd
lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
...
Also, do not give AVCodecContext.frame_size priority for muxing.
Updated 2 FATE references:
dxa-feeble - adds 1 audio frame that is still within 2 seconds as specified
by -t 2 in the FATE test
wmv8-drm-nodec - durations are not needed. previously they were estimated
using the packet size and average bit rate.
2012-03-05 13:08:18 -05:00
Justin Ruggles
8d1a20aa7c
aiffdec: do not set AVCodecContext.frame_size
...
It is unnecessary. Also, for some codecs we're reading more than 1 frame per
packet. Instead we use a private context variable to calculate the bit rate,
stream duration, and packet durations.
Updated FATE seek test, which has slightly different timestamps due to a
more accurate bit rate calculation.
2012-03-05 13:08:17 -05:00
Anton Khirnov
27c7ca9c12
lavf: deobfuscate read_frame_internal().
...
Split off packet parsing into a separate function. Parse full packets at
once and store them in a queue, eliminating the need for tracking
parsing state in AVStream.
The horrible unreadable loop in read_frame_internal() now isn't weirdly
ordered and doesn't contain evil gotos, so it should be much easier to
understand.
compute_pkt_fields() now invents slightly different timestamps for two
raw vc1 tests, due to has_b_frames being set a bit later. They shouldn't
be more wrong (or right) than previous ones.
2012-03-05 18:47:05 +01:00
Derek Buitenhuis
6aa6e3e814
fate: Add sunrast regression test
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-03-03 20:57:03 -05:00
Justin Ruggles
51ddf35c90
wmaenc: fix m/s stereo encoding for the first frame
...
We need to set ms_stereo in encode_init() in order to avoid incorrectly
encoding the first frame as non-m/s while flagging it as m/s. Fixes an
uncomfortable pop in the left channel at the start of playback.
CC:libav-stable@libav.org
2012-03-03 18:20:10 -05:00
Justin Ruggles
f9cf91d822
tiertexseq: set audio stream start time to 0
...
Update FATE test to reflect delayed video due to the file having audio-only
frames prior to the first frame with video.
2012-03-03 17:03:27 -05:00
Justin Ruggles
0883109b27
voc/avs: Do not change the sample rate mid-stream.
...
Also, set the time base based on the sample rate.
lavf-voc seek test updated to reflect slightly different seek points.
2012-03-03 17:03:27 -05:00
Justin Ruggles
d0ab585074
vqf: set packet duration
...
Fixes timestamp calculation.
The FATE reference is updated because timestamp calculations are now more
accurate. Previous timestamps were based on average bit rate.
2012-03-03 17:03:26 -05:00
Justin Ruggles
0b8b7db01b
mpegaudio_parser: do not ignore information from the first parsed frame
...
Update some demuxing and seeking fate tests.
2012-03-03 17:03:26 -05:00
Martin Storsjö
b087ce2bee
g722: Fix the QMF scaling
...
This fixes clipping if the encoder input used the full 16 bit
input range (samples with a magnitude below 16383 worked fine).
The filtered subband samples should be 15 bit maximum, while
the code earlier produced them scaled to 16 bit.
This makes the decoder output have double the magnitude
compared to before.
The spec reference samples doesn't test the QMF at all, which
was why this part slipped past initially.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-03-02 18:58:19 +02:00
Anton Khirnov
efec3bc65a
electronicarts: set timebase for tgv video.
...
The container has no timestamps and the framerate isn't stored in the
data either.
The decoder sets codec timebase to experimentally found value 1/15. Do
the same for the demuxer too, it should at least be better than the
default 1/90000.
2012-03-02 11:11:38 +01:00
Anton Khirnov
e39400c3a8
electronicarts: parse the framerate for cmv video.
2012-03-02 11:11:38 +01:00
Anton Khirnov
1d3144c318
electronicarts: don't set codec timebase
...
Demuxers are not supposed to set it.
Set stream timebase and framerates instead (this is a cfr container with
no timestamps).
2012-03-02 11:11:38 +01:00
Justin Ruggles
f240df6a74
FATE: do not decode audio in the nuv test.
...
We already have sufficient coverage for 16-bit pcm.
2012-02-29 15:45:50 -05:00
Justin Ruggles
841c17177b
FATE: add mp3 test for sample that exhibited false overreads
...
related to b716542691
Error messages and audible artifacts were fixed in that commit.
2012-02-29 15:12:18 -05:00
Paul B Mahol
31b132c094
fate: add cdxl test for bit line plane arrangement
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-29 15:11:05 -05:00
Martin Storsjö
85b221e4d3
dpxenc: Don't include the libavcodec ident if bitexact mode is enabled
...
This avoids breaking fate every time the lavc version is bumped.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-02-29 20:08:09 +02:00
Kostya Shishkov
12b812d2e5
prores: store and retrieve extended colourspace information
...
Based on the patch by Phil Barrett.
2012-02-29 09:29:02 +01:00
Kostya Shishkov
235d693286
prores: handle 444 chroma in right order
...
ProRes codes chroma blocks in 444 mode in different order than luma blocks,
so make both decoder and encoder read/write chroma blocks in right order.
Reported by Phil Barrett
2012-02-29 09:28:34 +01:00
Anton Khirnov
63efd83ae1
mpegvideo_enc: add chroma/luma_elim_threshold private options.
...
Deprecate corresponding AVCodecContext fields.
2012-02-29 07:23:31 +01:00
Anton Khirnov
ff71a383ac
mpegvideo_enc: add qp_rd flag to mpv_flags.
...
Deprecate CODEC_FLAG_QP_RD.
2012-02-29 07:12:10 +01:00
Derek Buitenhuis
273f4b39fc
fate: Overhaul WavPack coverage
...
WavPack has a comprehensive test suite, and a bunch
of corner cases.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-02-27 09:40:36 -08:00
Anton Khirnov
7929e22bde
lavf: don't guess r_frame_rate from either stream or codec timebase.
...
Neither of those is guaranteed to be connected to framerate in any way
(if it even exists).
Fixes bug 56.
2012-02-26 19:32:33 +01:00
Anton Khirnov
832ba44d8d
avconv: saner output video timebase.
...
r_frame_rate should in theory have something to do with input framerate,
but in practice it is often made up from thin air by lavf. So unless we
are targeting a constant output framerate, it's better to just use input
stream timebase.
Brings back dropped frames in nuv and cscd tests introduced in
cd1ad18a65
2012-02-26 07:48:45 +01:00
Anton Khirnov
87d7a92b62
rawdec: set timebase to 1/fps.
2012-02-26 07:30:21 +01:00
Anton Khirnov
493a86e25b
FATE: remove a bunch of useless -vsync 0
...
No changes in the test results.
2012-02-26 07:28:04 +01:00
Paul B Mahol
159a2436b0
fate: add tests for cdxl video
...
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-25 00:18:24 -05:00
Anton Khirnov
0584e3ca97
lavf: don't set AVCodecContext.has_b_frames in compute_pkt_fields().
...
It is not supposed to be done outside lavc.
This is basically a revert of 818062f2f3
.
It is unclear what issue this was supposed to fix, if it reappears again
it will have to be fixed in a more proper place.
The wtv-demux test change is because the sample starts with a B-frame.
2012-02-22 19:31:06 +01:00
Reimar Döffinger
2c87c7a952
Add prores regression test.
...
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-21 14:42:30 -05:00
Reimar Döffinger
a86ca94615
Enable already existing rso regression test.
...
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-21 14:42:30 -05:00
Reimar Döffinger
ecdb31caf2
Add regression test for "sox" format muxer/demuxer.
...
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-21 14:42:30 -05:00
Carl Eugen Hoyos
8ee2ddcb2a
Add dpx encoding regression test.
...
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2012-02-21 14:42:30 -05:00
Justin Ruggles
770a5c6d02
adpcmenc: Use correct frame_size for Yamaha ADPCM.
...
Output packet size should match avctx->block_align. The target output packet
size is 1024 bytes.
Before:
mono - 1024 samples -> 512 bytes
stereo - 2048 samples -> 2048 bytes
After:
mono - 2048 samples -> 1024 bytes
stereo - 1024 samples -> 1024 bytes
2012-02-20 15:52:32 -05:00
Justin Ruggles
c9fdf3241a
bethsoftvid: synchronize video timestamps with audio sample rate
...
According to unofficial documentation, the video rate is locked to the audio
sample rate. This results in proper synchronization of audio and video
timestamps from the demuxer. This only works if the first audio packet occurs
before the first video packet or the audio sample rate is the default rate of
11111 Hz, both of which are true for all samples in our archive.
2012-02-16 10:47:11 -05:00
Justin Ruggles
9546f331c6
bethsoftvid: Set video packet duration instead of accumulating pts.
2012-02-16 10:47:11 -05:00
Justin Ruggles
f320fb894c
bethsoftvid: pass palette in side data instead of in a separate packet.
...
Update FATE reference to account for now non-existent palette packet.
This also fixes the FATE test if frame data is not initialized in
get_buffer(), so update comment in avconv accordingly.
2012-02-16 10:47:11 -05:00
Aneesh Dogra
186dcbcb50
sunrast: Add fate test for gray8.
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2012-02-13 22:29:22 +01:00
Anton Khirnov
177bb4bf50
cljr: set the properties of the coded_frame, not input frame.
2012-02-12 08:05:38 +01:00
Justin Ruggles
b498867d66
FATE: update reference for seek-alac_mp4
...
This should have been updated in b590f3a7bf
.
2012-02-11 16:41:01 -05:00
Justin Ruggles
b590f3a7bf
alacenc: only encode frame size in header for a final smaller frame
...
Otherwise it is not needed because it matches the frame size as encoded in
the extradata.
2012-02-11 12:49:22 -05:00
Alex Converse
37bed6ff3f
aacdec: Try to sniff a reasonable channel layout for PCE based configurations.
...
This changes the output order of multichannel PCE based streams.
2012-02-09 13:33:06 -08:00
Diego Biurrun
0bba26466f
cosmetics: Delete empty lines at end of file.
2012-02-09 12:26:45 +01:00
Anton Khirnov
cd1ad18a65
rawenc: switch to encode2().
...
This changes a number of FATE results, since before this commit, the
timestamps in all tests using rawenc were made up by lavf.
In most cases, the previous timestamps were completely bogus.
In some other cases -- raw formats, mostly h264 -- the new timestamps
are bogus as well. The only difference is that timestamps invented by
the muxer are replaced by timestamps invented by the demuxer.
cscd -- avconv sets output codec timebase from r_frame_rate
and r_frame_rate is in this case some guessed number 31.42 (377/12),
which is not accurate enough to represent all timestamps. This results
in some frames having duplicate pts. Therefore, vsync 0 needs to be
changed to vsync 2 and avconv drops two frames. A proper fix in the
future would be to set output timebase to something saner in avconv.
nuv -- previous timestamps for video were wrong AND the cscd
comment applies, one frame is dropped.
vp8-signbias -- the file contains two frames with identical timestamps,
so -vsync 0 needs to be removed/changed to -vsync 2 and avconv drops one
frame.
vc1-ism -- apparrently either the demuxer lies about timestamps or the
file is broken, since dts == pts on all packets, but reordering clearly
takes place.
2012-02-08 21:51:24 +01:00
Anton Khirnov
1270e12e49
avconv: rework -t handling for encoding.
...
Current code compares the desired recording time with InputStream.pts,
which has a very unclear meaning. Change the code to use actual
timestamps of the frames passed to the encoder.
In several tests, one less frame is encoded, which is more correct.
In the idroq test one more frame is encoded, which is again more
correct.
Behavior with stream copy should be unchanged.
2012-02-07 20:11:11 +01:00
Anton Khirnov
4be1d7dc20
pva-demux test: add -vn
...
The output is obviously not supposed to contain video (since only
-acodec copy is specified), but that only happens because of the way -t
handling is implemented currently.
2012-02-07 20:06:57 +01:00
Anton Khirnov
d2afbd9a56
frame{crc/md5}: set the stream timebase from codec timebase.
...
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
2012-02-03 09:29:02 +01:00
Mans Rullgard
2c98f407c8
fate: make acodec-ac3_fixed test output raw AC3
...
There is no point in this test using the RM format.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-02-02 14:31:54 +00:00
Justin Ruggles
c3a06615bd
bethsoftvideo: fix palette reading.
...
Return the correct number of consumed bytes and set *data_size = 0.
Returned size is 1 too small, leading to that 1 byte being read as the next
frame, which results in an extra blank frame at the beginning of the stream.
2012-02-01 19:41:39 -05:00
Janne Grunau
e67e3a3f4a
fate-golomb: extend golomb-test to get_ue_golomb_long()
...
get_ue_golomb_long() is only tested for values up to 2^15 - 2 since
we can not write larger values.
Silence the test on success and return a non-zero value on error.
Use an heap scratch buffer instead of large stack buffer.
Remove unneeded includes.
2012-02-01 01:18:55 +01:00
Diego Biurrun
52afc97168
fate: add golomb-test
2012-01-31 19:56:13 +01:00
Diego Biurrun
e9ba6b3704
build: Use order-only prerequisites for creating FATE reference file dirs.
2012-01-30 13:00:35 +01:00
Anton Khirnov
7773161b8f
codec-regression: use private options instead of deprecated codec flags.
2012-01-27 10:38:33 +01:00
Anton Khirnov
7063b6eaee
lavc: increase major version to 54.
...
The lavf-ffm test results change because ffmenc writes
AVCodecContext.flags/flags2 and the defaults for those change.
2012-01-27 10:38:30 +01:00
Alex Converse
08628b6afb
Revert "sws/pixfmt/pixdesc: add support for yuva444p"
...
This reverts commit fc115c80b7
.
Tests are broken.
2012-01-26 18:06:57 -08:00
Paul B Mahol
fc115c80b7
sws/pixfmt/pixdesc: add support for yuva444p
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-27 09:24:08 +08:00
Paul B Mahol
7de9af65c7
fate: add XWD image regression test
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2012-01-26 01:51:26 +01:00
Janne Grunau
f028d4d1c3
mxfdec: hybrid demuxing/seeking solution
...
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
2012-01-22 14:40:53 +01:00
Diego Biurrun
e5903e2972
fate: add some shorthands to run groups of tests
2012-01-19 00:45:21 +01:00
Diego Biurrun
395e6402fe
fate: Give some tests more sensible names.
2012-01-19 00:45:06 +01:00
Gaurav Narula
b481bbc32a
tests: K&R formatting cosmetics for test programs
2012-01-18 21:07:17 +01:00
Diego Biurrun
2df5f59ad0
fate: split ADPCM and DPCM test references into separate files.
2012-01-15 22:00:12 +01:00
Justin Ruggles
4c82c6d993
FATE: convert output to rgba for the targa tests which currently output pal8
...
fixes the tests on big-endian systems
2012-01-13 18:40:12 -05:00
Janne Grunau
502bf3b462
fate: add missing reference files for targa tests in 9c2f9b0e2
...
Fixes fate-targa-conformance-CCM8 and fate-targa-conformance-UCM8.
2012-01-13 23:52:59 +01:00
Justin Ruggles
9c2f9b0e2d
FATE: enable the 2 remaining targa conformance suite tests
2012-01-13 17:13:12 -05:00
Justin Ruggles
e1a7af6f29
FATE: fix targa tests on big-endian systems
2012-01-13 16:14:48 -05:00
Justin Ruggles
68d6012c72
FATE: add tests for targa
...
Based on a patch by Oana Stratulat <oanaandreeastratulat@gmail.com>
2012-01-13 15:45:30 -05:00
Martin Storsjö
5c7c9a9f33
fate: Update file checksums after the mov muxer change in a78dbada55
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-01-10 16:54:23 +02:00
Gaurav Narula
a67b8c86d0
fate: Add tests for more AAC features.
...
al15_44 uses independent coupling.
al18_44 uses PNS (perceptual noise substitution).
am05_44 uses main prediction and independent coupling.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
2012-01-09 11:21:40 -08:00
Alex Converse
cd6e34d369
fate: Add tests for vc1/wmapro in ism.
2012-01-09 11:04:17 -08:00
Alex Converse
46ef355c65
aacdec: Add a fate test for 5.1 channel SBR.
2012-01-09 11:04:05 -08:00
Paul B Mahol
5cad970971
swscale: RGB4444 and BGR444 input
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-08 20:19:41 -08:00
Mike Melanson
d41d7773bc
FATE: add test for xWMA demuxer.
...
(Does not attempt to decode percetual audio data inside.)
Code coverage: libavformat/xwma.c: 3% -> 75%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-08 18:33:59 -08:00
Mike Melanson
2dee0cdb8e
FATE: add test for SMJPEG demuxer and associated IMA ADPCM audio decoder.
...
(Don't attempt to decode JPEG data.)
Code coverage: libavformat/smjpeg.c: 0% -> 69%
libavcodec/adpcm.c: 0% -> 10% (fresh run); 92.4% -> 93% following a FATE run
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-08 18:31:50 -08:00
Mike Melanson
599855748a
FATE: test to exercise WTV demuxer.
...
Does not attempt to decode perceptual codecs inside.
Code coverage: libavformat/wtv.c: 0% -> 71%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-08 14:53:35 -08:00
Mike Melanson
a83f5b8a96
FATE test: cvid-grayscale; ensures that the grayscale Cinepak variant is exercised.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-08 14:20:04 -08:00
Mike Melanson
15f073ee6d
FATE: xmv-demux test; exercise the XMV demuxer without decoding the perceptual codecs inside.
...
Code coverage:
libavformat/xmv.c: 3% -> 91%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-07 11:21:27 -08:00
Mike Melanson
2907f88aee
FATE test: BMV demuxer and associated video and audio decoders.
...
Code coverage:
libavcodec/bmv.c: 0% -> 75%
libavformat/bmv.c: 0% -> 85%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-07 11:10:58 -08:00
Mike Melanson
9689a1af6d
FATE: indeo4 video decoder test.
...
Code coverage:
libavcodec/indeo4.c: 0% -> 78%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-07 11:09:04 -08:00
Mike Melanson
f93843e9a0
FATE: update xxan-wc4 test to a sample with more code coverage.
...
The previous sample used for this test only contained type 0 frames.
Replace it with a sample that also features type 1 frames.
Code coverage:
libavcodec/xxan.c: 72% -> 89%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-07 11:06:53 -08:00
Mike Melanson
c262404d98
Change the recent h264_mp4toannexb bitstream filter test to output to an elementary stream rather than a program stream.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2012-01-07 11:04:46 -08:00
Justin Ruggles
77c5b66cbe
g722enc: set frame_size, and also handle an odd number of input samples
...
The fate reference is updated because the previous test skipped a sample in
each encode() call due each input frame having an odd number of samples.
2012-01-07 13:38:23 -05:00
Alex Converse
ce23b2af18
fate: Add missing reference file from 9b4767e4
.
2012-01-05 11:14:23 -08:00
Janne Grunau
5e5cde2745
vp3: add fate test for non-zero last coefficient
2012-01-05 18:18:08 +01:00
Justin Ruggles
3e57573fce
fate: add ADX encoding/decoding test
2012-01-03 18:47:42 -05:00
Oana Stratulat
fd16f56798
fate: add dxtory test
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2012-01-03 23:16:29 +01:00
Janne Grunau
881a5e047d
mpegenc: use avctx->slices as number of slices
...
Adds a new member to MpegEncContext to hold the number of used slice
contexts. Fixes segfaults with '-threads 17 -thread_type slice' and
fate-vsynth{1,2}-mpeg{2,4}thread{,_ilace} with --disable-pthreads.
2012-01-02 19:20:23 +01:00
Janne Grunau
60d626650a
fate: use rgb24 as output format for dfa tests
...
Palette is as supposed in native endianness. Converting the pal8 output
to rgb24 is thus necessary for identical CRCs on big and little endian
systems.
2012-01-01 17:11:27 +01:00
Oana Stratulat
febd022228
FATE: add tests for dfa
...
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
2011-12-31 15:06:31 -05:00
Diego Biurrun
9afc025bff
fate: whitespace cosmetics
2011-12-30 22:18:17 +01:00
Diego Biurrun
628637f67b
fate: split off video codec FATE tests into their own file
2011-12-30 22:18:14 +01:00
Diego Biurrun
ab2d11f75b
fate: split off audio codec FATE tests into their own file
2011-12-30 22:18:13 +01:00
Diego Biurrun
394f0b18bf
fate: split off Electronic Arts codec FATE tests into their own file
2011-12-30 22:18:12 +01:00
Diego Biurrun
f6ba1f2641
fate: split off QuickTime codec FATE tests into their own file
2011-12-30 22:18:11 +01:00
Diego Biurrun
51150cf070
fate: split off voice codec FATE tests into their own file
2011-12-30 22:18:10 +01:00
Diego Biurrun
c7cb1730da
fate: split off demuxer FATE tests into their own file
2011-12-30 22:18:09 +01:00
Diego Biurrun
f486fb338e
fate: drop pointless _audio and _video suffixes from xan tests
2011-12-30 21:14:07 +01:00
Mike Melanson
ae51b1a9ba
FATE: Add test for H.264 MP4->annex.B bitstream filter.
...
This test uses an existing FATE sample (h264/interlaced_crop.mp4).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-12-30 11:20:20 -08:00
Diego Biurrun
209c445267
fate: split off DPCM codec FATE tests into their own file
2011-12-30 01:01:20 +01:00
Diego Biurrun
bdda1616f4
fate: split off PCM codec FATE tests into their own file
2011-12-30 01:01:18 +01:00
Aneesh Dogra
8ca903ebcb
fate: Add a video test for xxan decoder
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-12-29 13:59:09 -08:00
Aneesh Dogra
ac1c27bc2b
fate: add more tests for VC-1 decoder
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-12-29 15:32:31 +01:00
Reimar Döffinger
733b23c2e4
fate: Add v210 codec regression tests
...
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-12-28 20:50:41 +01:00
Diego Biurrun
723c35feb0
fate: split off vqf/twinvq FATE tests into their own file
2011-12-26 16:43:04 +01:00
Diego Biurrun
9e5bd6cc94
fate: split off mpc FATE tests into their own file
2011-12-26 16:43:03 +01:00
Diego Biurrun
913b6b4b98
fate: split off libavcodec FATE tests into their own file
2011-12-26 16:43:03 +01:00
Diego Biurrun
4e616d0915
fate: split off Microsoft codec FATE tests into their own file
2011-12-26 16:43:02 +01:00
Diego Biurrun
bebf9f923e
fate: group all VP* codec FATE tests together in one file
2011-12-26 16:43:01 +01:00
Luca Barbato
9f3c77dd2a
fate: account for NUT 10bit support
...
Some libavifilter tests use NUT as output even if the produced
files were not decodable. The support for 10bit introduced in
432f0e5b7d
and 91b1e6f0c
changed the hashes.
2011-12-21 03:01:18 +01:00
Mans Rullgard
583d3b7f97
fate: fix eatqi test
...
The sample has an incomplete last frame. Decoding it is pointless.
The garbage produced was changed by the bitstream reader now
protecting against over-reads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-12-17 15:49:25 +00:00
Alex Converse
d3b8bde2f1
movenc: Rudimentary IODs support.
2011-12-15 14:06:13 -08:00
Janne Grunau
ef5756aee0
fate: add -pix_fmt rgb48le to r210 test
...
Fixes checksum on big endian systems.
2011-12-15 15:56:15 +01:00
Aneesh Dogra
beaf4012d2
fate: add r210 decoder test
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-12-15 14:34:09 +01:00
Diego Biurrun
6146d78d35
fate: split off Indeo FATE tests into their own file
2011-12-15 13:31:43 +01:00
Diego Biurrun
44b7e1b942
fate: split off ATRAC FATE tests into their own file
2011-12-15 13:31:41 +01:00
Derek Buitenhuis
6c3abd70fd
fate: Add FATE tests for v410 encoder and decoder
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2011-12-15 13:31:40 +01:00
Diego Biurrun
61ad9a4bb3
fate: Replace misleading "aac" in the name of an ADTS test with "adts".
2011-12-14 20:09:46 +01:00
Diego Biurrun
80726be491
fate: Drop pointless "-an" from pictor test command.
2011-12-14 20:09:44 +01:00
Diego Biurrun
d69a03ef41
fate: split off image codec FATE tests into their own file
2011-12-14 20:06:18 +01:00
Diego Biurrun
b998aec461
fate: split off WMA codec FATE tests into their own file
2011-12-14 19:59:54 +01:00
Diego Biurrun
8602767492
fate: split off lossless video and audio FATE tests into their own files
2011-12-14 19:52:14 +01:00
Diego Biurrun
f8c47cb863
fate: split off qtrle codec FATE tests into their own file
2011-12-14 19:52:12 +01:00
Diego Biurrun
42de665db9
fate: split off Ut Video codec FATE tests into their own file
2011-12-14 19:52:07 +01:00
Diego Biurrun
753a5063bd
fate: split off screen codec FATE tests into their own file
2011-12-14 19:09:58 +01:00
Diego Biurrun
bad3817919
fate: split off Real Inc. codec FATE tests into their own file
2011-12-14 19:09:56 +01:00
Diego Biurrun
bf6923577e
fate: split off AC-3 codec FATE tests into their own file
2011-12-14 19:09:48 +01:00
Luca Barbato
4f3667ba59
vc1: mark with ER_MB_ERROR bits overconsumption
...
This patch is a generalization of what Michael Niedermayer
fixed in a single case.
The wmv8-drm fate test had been updated accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-12-13 16:20:58 +01:00
Diego Biurrun
58c42af722
doxygen: misc consistency, spelling and wording fixes
2011-12-12 23:06:23 +01:00
Anton Khirnov
e745d7525a
rawdec: don't set codec timebase.
...
It's not supposed to be set outside of lavc. Set r_frame_rate and
avg_frame_rate instead.
2011-12-10 22:02:44 +01:00
Paul B Mahol
7d18d17abd
Add CLJR encoding and decoding regression tests
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2011-12-10 20:11:29 +01:00
Aneesh Dogra
97334f106c
utvideo: add fate tests covering all codec variants
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-12-10 15:29:53 +01:00
Justin Ruggles
8e8c51318c
movenc: simplify handling of pcm vs. adpcm vs. other compressed codecs
...
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
2011-12-09 16:12:58 -05:00
Ronald S. Bultje
b41995d20e
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
2011-12-05 07:39:46 -08:00
Martin Storsjö
714cd7e758
g722: Add a regression test for muxing/demuxing in wav
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2011-12-05 12:41:46 +02:00
Janne Grunau
8dd92eca74
latmdec: add fate test for audio config change
2011-12-04 15:38:14 +01:00
Derek Buitenhuis
55a280569f
fate: Add a test for the VBLE decoder
...
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-12-03 01:50:07 +01:00
Luca Barbato
5a2e251645
fate: update asf seektest
2011-12-02 16:43:05 +01:00
Justin Ruggles
ca12401376
fate: split acodec-pcm into individual tests
...
this removes 2 redundant tests for pcm in mkv.
we can add the coverage back in later as fate-lavf tests if needed.
2011-12-01 13:27:56 -05:00
Janne Grunau
d14d4d982c
aacdec: add more fate tests covering SBR and PS
...
Add all seven test bitstreams of Coding Technologies "aacPlus Decoder
Check Package". The streams cover different ways to signal SBR and PS
in different formats.
2011-11-25 08:25:12 +01:00
Anton Khirnov
3eedd29bd7
bethsoftvideo: return proper consumed size for palette packets.
...
Also check for sufficient packet size.
2011-11-23 21:58:30 +01:00
Justin Ruggles
5872c78122
cdg: skip packets that don't contain a cdg command.
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-11-23 21:58:10 +01:00
Anton Khirnov
0844b57c11
crcenc: add flags
...
AVFMT_NOTIMESTAMPS for crc, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framecrc, as it prints dts.
Many FATE changes, because avconv is no longer duplicating frames in
those tests.
Also added -vsync 0 for some tests to prevent avconv from dropping
frames until it can be fixed more properly.
2011-11-23 21:43:46 +01:00
Anton Khirnov
50efd3cad8
md5enc: add flags
...
AVFMT_NOTIMESTAMPS for md5, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framemd5, as it prints dts.
-vsync 0 for the vp8 test is needed because with vsync 2 the timestamp
guessing code gets confused by an altref frame that is never displayed
and drops a frame later.
2011-11-23 20:19:26 +01:00
Mans Rullgard
3fe5fc9325
regtest: split video encode/decode tests into individual targets
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-11-22 12:13:04 +00:00
Anton Khirnov
81ac4cda0b
fate-lavf-ts: use -mpegts_transport_stream_id option.
...
Serves as a test of muxer private options.
2011-11-18 11:01:46 +01:00
Diego Biurrun
c6cd0e17f3
Replace vendor string in Ogg and FLAC muxers.
2011-11-02 10:43:39 +01:00
Justin Ruggles
82ed4f1ed8
remove the zork pcm seek test
...
this was forgotten when the encoder was removed
2011-10-26 18:48:02 -04:00
Justin Ruggles
85579b6381
avcodec: remove the Zork PCM encoder.
...
The Zork PCM decoder does not decode the 1 sample we have correctly, therefore
the encoder based on the decoder is also incorrect. There is no good reason to
keep the encoder.
2011-10-26 12:01:07 -04:00
Ronald S. Bultje
f99654d470
swscale: reintroduce full precision in 16-bit output.
2011-10-22 10:35:14 -07:00
Ronald S. Bultje
dc49bf1270
sws/pixfmt/pixdesc: add support for yuv420p9le/be.
2011-10-21 00:58:01 -07:00
Ronald S. Bultje
e85297e0e7
Revert d1d421cbc0
: change to fate-lavfi-crop_scale.
2011-10-21 00:21:31 -07:00
Justin Ruggles
1baa25c7da
shorten: fix end-of-stream decoding.
...
enable CODEC_CAP_DELAY to flush any remaining frames in the buffer.
Stop decoding when the FN_QUIT command is found so that a trailing seek table
isn't decoded as a normal frame.
decode all channels in the same call to avcodec_decode_audio3() so that
decoding will not stop after the first channel of the last frame.
Updated FATE reference. More valid audio is now decoded.
2011-10-20 13:09:46 -04:00
Ronald Bultje
d1d421cbc0
swscale: prevent overflow during initialization
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-18 10:29:49 +02:00
Martin Storsjö
6e6003a4d2
g722: Add a fate test for the encoder
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2011-10-18 10:45:22 +03:00
Martin Storsjö
73dbc89cbb
fate: Add a target for creating a 16000 Hz mono synthetic audio file
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2011-10-18 10:45:17 +03:00
Mans Rullgard
91038cdbd1
prores: get correct size for coded V plane if alpha is present
...
The size check must be updated to take into account both manners
in which v_data_size might be set.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-10-15 14:59:44 +01:00
Mans Rullgard
cd14e297e6
prores: do not set pixel format on codec init
...
The pixel format is not known until the frame header is parsed.
Guessing it here only causes trouble for the caller if the guess
turns out to be wrong (and actually causes very wrong output by
avconv/avplay).
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-10-15 14:59:44 +01:00
Justin Ruggles
ff5790c761
adpcmdec: do not terminate early in ADPCM IMA Duck DK3 decoder.
...
There are still 2 nibbles to decode once the last byte in the packet has been
read. Updated FATE reference.
2011-10-14 15:53:41 -04:00
Ronald S. Bultje
f78cd0c243
prores-idct: fix overflow in c code.
...
Fix the fate ref for prores-422_proxy by reverting the changes to it
in commit f492df0927
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-14 21:34:20 +02:00
Janne Grunau
8aa80ec5e3
fate: update prores-alpha ref after changing pix_fmt to yuv444p10le
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-14 21:33:01 +02:00
Diego Biurrun
f492df0927
prores: add appropriate -fix_fmt parameter to FATE command
...
Also correct CRCs for Sequence_1-Apple_ProRes_422_Proxy.mov, previous
CRCs were generated with the non-bitexact x86_64 assembler IDCT.
2011-10-14 18:17:34 +02:00
John Brooks
2c4e08d893
riff: always generate a proper WAVEFORMATEX structure in ff_put_wav_header
...
The cbSize field should be included in all cases, even with PCM where
its value is ignored.
Fixes encoding PCM audio in Matroska for some players which insist on
a full WAVEFORMATEX structure for A_MS/ACM audio.
Since fate uses wav files for the audio test a larger number of tests
has changed checksums or shifted positions due to the 2 byte longer
wave header.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-14 13:28:58 +02:00
Diego Biurrun
a62d36697d
prores: add FATE tests
2011-10-13 23:20:39 +02:00
Anton Khirnov
04de1569cd
sws: support yuv444p9/10 output.
2011-10-12 08:27:30 +02:00
Mans Rullgard
0836d48a16
fate: run avconv with -nostats flag
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-10-09 16:53:12 +01:00
Janne Grunau
c2f2dfb3dd
motionpixels: decode only the 111 complete frames for fate
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-07 19:32:07 +02:00
Laurent Aimar
d337dd3a90
motionpixels: Clear FF_INPUT_BUFFER_PADDING_SIZE bytes at the end of the temporary buffer
...
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2011-10-07 16:25:31 +02:00
Mans Rullgard
dec4b4705f
fate: use 'run' helper for seek-test
...
This is simpler, and the actual seek-test command is printed with V=1.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-09-28 02:30:30 +01:00
Mans Rullgard
bc3a741fa0
fate: remove seek-mpeg2reuse test
...
The input file for this test is no longer generated.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-09-28 02:30:30 +01:00
Anton Khirnov
d3c1d37a90
avconv: use different variables for decoded and filtered frame.
...
Makes the code less obfuscated and fixes encoding one video stream to
several outputs.
Also use avcodec_alloc_frame() instead of allocating AVFrame on stack.
Breaks me_threshold in avconv, as motion vectors aren't passed through
lavfi. They could be copied manually, but I don't think this misfeature
is useful enough to justify ugly hacks.
2011-09-27 19:17:37 +02:00
Mans Rullgard
908f12f342
fate: allow testing with libavfilter disabled
...
This declares dependencies to skip tests using libavfilter
when it is disabled.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-09-27 00:05:51 +01:00
Baptiste Coudurier
b304244b54
adpcmenc: fix QT IMA ADPCM encoder
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-09-23 20:54:29 -04:00
Baptiste Coudurier
bf334535b4
adpcmdec: Fix QT IMA ADPCM decoder
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-09-23 20:54:28 -04:00
Kieran Kunhya
4d4d0e8176
Fix unnecessary shift with 9/10bit vertical scaling
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2011-09-23 02:13:30 +02:00
Diego Biurrun
20e1829dad
fate.sh: Ignore errors from rm command during cleanup.
...
The install directory being deleted might not be present if the build failed.
This can lead to annoying error output if the FATE client is run as a cronjob.
2011-09-22 17:39:30 +02:00
Diego Biurrun
12ad0677b4
fate.sh: Run git-pull in quiet mode to avoid console spam.
...
Since fate.sh can be run from cron, silent commands are preferrable.
2011-09-22 17:39:29 +02:00
Anton Khirnov
775af761a0
eval: test isnan(sqrt(-1)) instead of just sqrt(-1)
...
sqrt(-1) returns "some NaN", it's not specified which exactly.
2011-09-22 08:13:55 +02:00
Stefano Sabatini
8cee38a298
eval: implement not() expression
2011-09-19 12:38:34 +02:00
Stefano Sabatini
9bc393908a
eval: add sqrt function for computing the square root
2011-09-19 12:38:14 +02:00
Anton Khirnov
7574cacbd5
movenc: create an alternate group for each media type
...
Partially fixes bug 44.
2011-09-17 08:42:30 +02:00
Anton Khirnov
d906f49aa8
rawdec: g722 is always 1 channel/16kHz
2011-09-17 06:42:17 +02:00
Michael Niedermayer
5166376f24
smacker: fix a few off by 1 errors
...
stereo & 16bit is untested due to lack of samples
Signed-off-by: Martin Storsjö <martin@martin.st>
2011-09-14 11:13:54 +03:00
Anton Khirnov
77d9c4542c
avconv: rewrite -qscale and -aq handling.
...
Merge video_qscale (set by -qscale) and audio_qscale (set by -aq) into
one 'qscale' field in the options context. Add a shortcut -q for -qscale
and make -aq an alias for -q:a.
2011-09-11 17:30:03 +02:00
Baptiste Coudurier
08fa23d6c2
v210dec: switch to PIX_FMT_422P10
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-09-07 12:16:15 +02:00
Anton Khirnov
9c684feadc
libx264: add 'direct-pred' private option
...
Deprecate AVCodecContext.directpred
2011-09-07 07:27:55 +02:00
Anton Khirnov
0635a8aa21
libx264: add 'partitions' private option
...
Deprecate AVCodecContext.partitions.
2011-09-07 07:27:18 +02:00
Justin Ruggles
ae264bb29b
ac3enc: Add channel coupling support for the fixed-point AC-3 encoder.
...
Update FATE references accordingly.
2011-09-05 10:09:44 -04:00
Anton Khirnov
bc5acfa7af
fate: use +frame+slice named constants instead of '3'
2011-09-05 12:11:08 +02:00
Anton Khirnov
96139b5e32
avconv: move max_frames to options context.
...
Add a -frames option that uses generic stream specifiers, change
-[vad]frames into aliases to it.
2011-09-05 11:16:46 +02:00
Anton Khirnov
13ccba50d4
avconv: move limit_filesize to options context
2011-09-04 13:12:00 +02:00
Anton Khirnov
6b779cccaa
avconv: move start_time, recording_time and input_ts_offset to options context
2011-09-04 13:12:00 +02:00
Alex Converse
757b86cd9e
codec-regression: force vsync 0 on the me_threshold test to make sure frames match.
2011-09-01 16:35:38 -07:00
Stefano Sabatini
1717ba0cdd
fifo: add FIFO API test program, and fate test
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-08-26 20:54:36 +02:00
Anton Khirnov
fb42d156ed
movenc: use libx264 by default when possible for mov, mp4 and psp
2011-08-22 07:17:35 +02:00
Anton Khirnov
b71389cbae
avienc: saner default audio codec.
...
libmp3lame if available, ac3 otherwise.
2011-08-22 07:17:19 +02:00
Anton Khirnov
3436c4a368
matroskaenc: saner default codecs.
...
libvorbis/libx264 for video if available, otherwise ac3/mpeg4.
2011-08-22 07:16:55 +02:00
Anton Khirnov
ddf5ef0263
avconv: remove -intra option.
...
It's equivalent to -g 0.
2011-08-18 11:22:05 +02:00
Anton Khirnov
ef44a60710
avconv: rescue poor abused recording_time global.
...
Keep a per-OutputFile instance of it, thus making -t work with multiple
output files.
2011-08-17 20:00:06 +02:00
Kostya Shishkov
a43b1e74e2
rmdec: parse FPS in RealMedia properly
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-08-17 15:00:42 +02:00
Kostya Shishkov
48ce8b8da7
Use parsers for RealVideo 3/4 to determine correct PTS
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-08-17 15:00:42 +02:00
Kostya Shishkov
7c1f6df4b5
rmdec: correct DTS calculation in RealMedia container.
...
First, container stores only DTS and not PTS as it was believed.
Second, multiple frames in a packet store timestamp instead of position
after the frame length.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-08-17 15:00:42 +02:00
Anton Khirnov
6cd9d0f77d
Revert "avconv: use stream copy by default when possible."
...
This reverts commit 4f4f33844a
.
This commit has some ugly corner cases and needs to be discussed
further.
2011-08-16 20:59:14 +02:00
Anton Khirnov
4f4f33844a
avconv: use stream copy by default when possible.
2011-08-16 20:24:20 +02:00
Anton Khirnov
64db1a82d6
lavc: add audio flag to the 'b' option, deprecate 'ab'.
...
Its only reason for its existence was ffmpeg's inability to properly assign
AVOptions to streams. Now this is not a problem anymore, so 'ab' should
go.
2011-08-16 06:20:43 +02:00
Anton Khirnov
f4ad238c6c
avconv: rename sameq to same_quant
...
It's often mistakenly used as 'same quality', emphasize that it's not
true in the manual.
2011-08-16 06:19:08 +02:00
Ronald S. Bultje
28c1115a91
swscale: use 15-bit intermediates for 9/10-bit scaling.
2011-08-12 11:54:25 -07:00
Anton Khirnov
6291d7e416
Make a copy of ffmpeg under a new name -- avconv.
...
It will be further developed with a few incompatible changes.
ffmpeg.c will stay as is for some time, so any scripts using it won't be
broken.
2011-08-12 13:27:30 +02:00
Kostya Shishkov
b86ab38137
Add weighted motion compensation for RV40 B-frames
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-08-11 16:07:58 -07:00
Ronald S. Bultje
62ee0e6a97
Revert "swscale: use 15-bit intermediates for 9/10-bit scaling."
...
This reverts commit ac0fb59348
. It
causes valgrind errors which I'll want to investigate before
resubmitting this.
2011-08-02 12:27:43 -07:00
Ronald S. Bultje
ac0fb59348
swscale: use 15-bit intermediates for 9/10-bit scaling.
2011-08-02 10:34:02 -07:00
Kostya Shishkov
6f7fe4723b
Correct chroma vector calculation for RealVideo 3.
...
Old version divided it wrong, which resulted in chroma drift (visible on FATE
sample too as dirty trails left by clouds).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-08-02 08:23:47 -07:00
Anton Khirnov
b4ea1c5a77
Remove the ffserver test.
...
It doesn't work and is therefore useless.
2011-08-01 11:36:16 +02:00
Mans Rullgard
4555874af1
dnxhd: add regression test for 10-bit
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-21 18:44:46 +01:00
Joseph Artsimovich
eedb1f2034
swscale: mark YUV422P10(LE,BE) as supported for output
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-21 02:10:31 +01:00
Mans Rullgard
b13c6e336c
fate: make vsynth tests depend on only the relevant vref
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-18 18:46:57 +01:00
Mans Rullgard
0218808d49
fate: separate lavf-mxf_d10 test from lavf-mxf
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-17 16:30:49 +01:00
Jindrich Makovicka
575c38d76c
mpegtsenc: set Random Access indicator on keyframe start packets
...
Signed-off-by: Jindrich Makovicka <jindrich.makovicka@nangu.tv>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2011-07-13 20:49:26 +02:00
Diego Biurrun
191c5f8ff3
build: move tests/seek_test.c to libavformat and reuse generic build rules
2011-07-13 13:27:15 +02:00
Mans Rullgard
ca9036155d
build: remove unnecessary FFLDFLAGS variable
...
This variable is set to the same value for all directories.
Adding the -L flags directly to LDFLAGS is simpler and achieves
the same thing.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-11 11:39:04 +01:00
Mans Rullgard
28e1c97916
build: rework rules for things in the tools dir
...
Declaring tools associated with each library in their respective
makefiles allows these tools to easily depend on the correct
prerequisites and link against the libs they need.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-10 21:13:38 +01:00
Anton Khirnov
18c007ba37
lavc: remove a half-working attempt at different defaults for audio/video codecs.
...
It should be replaced with proper per-codec defaults.
2011-07-10 17:08:58 +02:00
Ronald S. Bultje
7d7bacf0f1
swscale: fix overflow in 16-bit vertical scaling.
...
We operated on 31-bits, but with e.g. lanczos scaling, values can
add up to beyond 0x80000000, thus leading to output of zeroes. Drop
one bit of precision fixes this.
2011-07-08 15:15:30 -07:00
Ronald S. Bultje
f44d50a94c
swscale: fix 16-bit horizontal scaling underflow.
...
When using e.g. lanczos scaling, values can drop below 0, so they
should never be unsigned.
2011-07-08 15:15:30 -07:00
Ronald S. Bultje
42d622fab3
swscale: fix 16-bit scaling when output is 8-bits.
...
We would use the second half of the U plane buffer, rather than the
V plane buffer, to output the V plane pixels.
2011-07-08 15:15:30 -07:00
Anton Khirnov
f5302e5dcf
ffmpeg: deprecate loop_input and loop_output options
...
They were replaced by (de)muxer private options.
2011-07-08 19:58:19 +02:00
Diego Biurrun
bb83478d2c
build: remove unused copy regression test script
...
The copy regression test script is unused, bash-specific and did
not even work properly when it was originally committed.
2011-07-07 22:47:24 +02:00
Anton Khirnov
5e8d2e337e
lavf: deprecate AVStream.quality.
...
AVStream is no place for it and it's unused outside of ffmpeg anyway.
2011-07-06 20:10:41 +02:00
Ronald S. Bultje
dfd8116986
eval: add missing comma to tests.
2011-07-05 18:18:11 -07:00
Mans Rullgard
240c5d6f3b
fate: test more FFT etc sizes
...
This tests sizes from 16 to 4096, not only the default 512.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 18:33:04 +01:00
Mans Rullgard
75a24bef4a
iirfilter: add fate test
...
Change the test program to output text instead of binary files so
it can be compared easily in FATE.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 16:26:26 +01:00
Mans Rullgard
94350ab986
eval: clear Parser instances before using
...
This prevents random values from the stack being used as
"variables" in expressions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 12:31:47 +01:00
Mans Rullgard
27e7144350
fate: add idct8x8 test
...
This tests the IDCT implementations available in the build.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 10:38:17 +01:00
Mans Rullgard
883fd9e393
eval: add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 10:26:24 +01:00
Mans Rullgard
84757de0f5
fate: add 'null' comparison method
...
Setting CMP=null uses stdout from the test as the diff record in
the report without further inspection. This can be useful when
the exit status of the test itself determines success while the
output is informative.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-04 09:54:16 +01:00
Mans Rullgard
0ebcdf5cda
Do not include mathematics.h in avutil.h
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-03 21:42:06 +01:00
Mans Rullgard
8b53755ebd
md5: add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-03 18:19:18 +01:00
Mans Rullgard
14376a53b2
crc: add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-03 17:17:54 +01:00
Mans Rullgard
03256d96e4
fate: move libavutil test rules to a separate file
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-03 17:17:16 +01:00
Mans Rullgard
904b5d302d
fate: add DES test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-07-03 13:41:31 +01:00
Alex Converse
29651e1d44
fate-aac: Expand coverage.
...
Add al05_44, al06_44, al17_44.
2011-07-01 10:14:14 -07:00
Ronald S. Bultje
8a8d0ce208
swscale: for >8bit scaling, read in native bit-depth.
...
For 9/10bit, it means we don't have to upscale to 16bit before
actual scaling or pixel format conversion, and thus a performance
gain.
2011-07-01 09:08:26 -07:00
Diego Biurrun
bd9a9a2f18
build: Eliminate obsolete test targets.
...
The targets are now part of FATE and can be run as individual FATE targets.
2011-06-30 13:06:27 +02:00
Mans Rullgard
71f029146c
base64: add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-30 09:47:32 +01:00
Mans Rullgard
744765a9c5
aes: improve test program and add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-30 09:47:32 +01:00
Mans Rullgard
f6252b4845
adler32: make test program more useful and add fate test
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-30 09:47:32 +01:00
Mans Rullgard
0291ce840c
fate: move amr[nw]b test rules into separate files
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-29 19:22:58 +01:00
Ronald S. Bultje
ef1ee362b3
swscale: implement >8bit scaling support.
...
This means that precision is retained when scaling between sample
formats with >8 bits per component (48bit RGB, 16bit grayscale,
9/10/16bit YUV).
2011-06-29 09:45:52 -07:00
Mans Rullgard
b0da4903dd
fate: enable lavfi-pixmt tests on big endian systems
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-28 23:35:00 +01:00
Mans Rullgard
842f463c77
fate: merge identical pixdesc_be/le tests
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-28 21:31:42 +01:00
Ronald S. Bultje
618230c7f4
swscale: update big endian reference values after dff5a835
.
2011-06-28 08:58:21 -07:00
Mans Rullgard
deb3ed01b5
build: replace some addprefix/addsuffix with substitution refs
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-28 15:59:27 +01:00
Ronald S. Bultje
dff5a83532
swscale: re-add support for non-native endianness.
...
This works through some non-obvious hacks in utils.c.
2011-06-27 18:10:41 -07:00
Mans Rullgard
f038cf3c74
build: remove SRC_PATH_BARE variable
...
Setting SRC_PATH to "." when building in-tree removes the need
for a quoted version of the source path since out-of-tree builds
are not possible if the pathname contains spaces.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-23 12:17:25 +01:00
Mans Rullgard
698a183e30
build: move test rules to tests/Makefile
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-22 22:53:07 +01:00
Mans Rullgard
ea57502c82
fate: remove output redirections from old regtest scripts
...
All tests are run through the fate-run.sh script which already
sets up redirections. Using the outputs set there simplifies
things somewhat.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-21 12:37:58 +01:00
Ronald Bultje
d42aaa802e
error_resilience: actually add counter when adding a MV predictor.
...
Without, the predictor isn't actually used.
2011-06-20 22:18:23 +02:00
Anton Khirnov
8035f42968
ffmpeg: use new avformat_open_* API.
2011-06-16 20:24:57 +02:00
Anton Khirnov
7cbc2e60af
codec-regression: remove pointless -r options for dnxhd
2011-06-16 10:56:45 +02:00
Anton Khirnov
d7ee44024c
ffmpeg: don't abuse a global for passing samplerate from input to output
...
It's broken with multiple files or audio streams.
This removes the default samplerate of 44100 for raw input, hence all
the FATE changes.
2011-06-15 21:57:52 +02:00