* qatar/master:
swscale: K&R formatting cosmetics (part II)
tiffdec: Add a malloc check and refactor another.
faxcompr: Check malloc results and unify return path
configure: escape colons in values written to config.fate
ac3dsp: call femms/emms at the end of float_to_fixed24() for 3DNow and SSE
matroska: Fix leaking memory allocated for laces.
pthread: Fix crash due to fctx->delaying not being cleared.
vp3: Assert on invalid filter_limit values.
h264: fix 10bit biweight functions after recent x86inc.asm fixes.
ffv1: Fix size mismatch in encode_line.
movenc: Remove a dead initialization
git-howto: Explain how to avoid Windows line endings in git checkouts.
build: Move all arch OBJS declarations into arch subdirectory Makefiles.
Conflicts:
configure
libavcodec/vp3.c
libavformat/matroskadec.c
libavutil/Makefile
libswscale/Makefile
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Its bad to free things without zeroing them.
This fixes a potential issue when mov_read_close() would be called twice.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If mov_read_header exits under error, the memory allocated is
not freed.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Convert key_off initialize to use the same sc->keyframe_count as
used elsewhere in the function.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes potential out-of-bounds writes.
This is mostly possible when muxing ALS files where from
an extradata size of about 1050 put_bits would write data
outside the buffer.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
For the FATE test sample used, this only avoids a warning
message.
However for other samples like al05_44.mp4 the converted
file can be played only after this fix.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This will only work for DSEs that are first in a packet, but
that is enough to fix handling of the reference files in
fate-suite/aac (though most of them still have other issues).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Otherwise for muxers like e.g. latmenc that never call
avio_flush (and do not have a write_trailer function)
a part of the data will always be missing.
Also update references for the voc muxer, which was also
buggy before and did not write out all data.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
avplay: Don't free video filters string until the end of decoding.
movenc: small refactor mov_write_packet
movenc: remove redundant check
interplayvideo: fix av_dlog parameter type mismatch
Drop some pointless #ifdefs.
Conflicts:
libavcodec/interplayvideo.c
libavcodec/libxvidff.c
libavcodec/snowenc.c
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously it would just silently write out incorrect data.
This also fixes a potential integer overflow in the allocation.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
"Fix" in so far as at least it will no longer overread and possibly
crash and makes somewhat sense, but no idea whether there is anything
that can play the resulting files (FFmpeg can't).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtsp: Don't use av_malloc(0) if there are no streams
rtsp: Don't use uninitialized data if there are no streams
vaapi: mpeg2: fix slice_vertical_position calculation.
hwaccel: mpeg2: decode first field, if requested.
cosmetics: Fix indentation
rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Searching for packet markers doesn't make sense for this use case,
where packets are fed one at a time to the demuxer.
This fixes playing back streams that have packets not starting
with the 0x82, 0x00, 0x00 marker.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can take a long time before subtitles or data streams show up,
so we shouldn't wait for those before assuming we have all info
for streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The correct point that seperates ISO and MAC language codes is 0x400
according to the current QT spec. Old QT specs did not list where this
seperation is but apparently only defined the meaning of the first 137.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The handler name is stored as a pascal string in the QT specs (first
byte is the length of the string), thus leading to an invalid metadata
string export.
Also add a second length check based on the first character to avoid
overwriting an already specified handler_name (it happens with Youtube
videos for instance, the handler_name get masked), or specifying an
empty string metadata.
To reproduce the problem, using ffprobe:
./ffprobe -show_packets -print_format compact -fflags +genpts -i
fate_samples/mxf/C0023S01.mxf
You will notice that the last video frame does not have it's PTS being
set, even with using genpts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
