lavfi has been considered to be stable for a while now, so it is enabled
in most configurations. Supporting avplay without lavfi requires a lot
of nontrivial ifdef mess for no good reason.
AVX2 support was introduced in Yasm 1.2.0 and NASM 2.10, and the
oldest versions currently supported are Yasm 0.8.0 and NASM 2.03
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Before this patch trying to enable only https by issuing
--disable-protocols --enable-protocol=https --enable-gnutls
does not enable https, and
--disable-all --enable-protocols
does not enable libavformat and the protocols component.
Now the default-enabled options are set after the explicitly
disabled/enabled options are evaluated.
If an explicitly enabled option cannot be enabled configure
will fail printing an error message.
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes builds with --disable-vda, which previously failed with
undefined references to CVImageBuffer* and CVPixelBuffer* functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
While pr is a valid POSIX.1 command, its usage in configure
is a little borderline and is possible to replace it with
printf.
Bug-Id: 913
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
MSYS, as per cygwin, by default uses a custom posix abstraction
in the form of a "msys2.dll". Programs build that way are harder to
distribute and use.
MSYS2 provides alternate launcher scripts that provide a MINGW
environment nearly out of box.
In order to load libraries in Android they need to be unversioned.
The android target section was derived from the BSD ones, and they
that simply drop the SONAME
Android M requires to have a SONAME entry but unversioned.
Some systems may be lacking getservbyport; the previous ifdef wasn't
quite enough since it still assumed that struct servent was defined,
as pointed out by Clément Gregoire.
Simply remove the possibility to return non-numeric services in
getnameinfo; no caller of getnameinfo within libavformat
currently try to use getnameinfo for retrieving the port number without
NI_NUMERICSERV, and falling back on getservbyport may be non-threadsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings like this one:
libavformat/file.c(62) : warning C4996: 'read': The POSIX name for this
item is deprecated. Instead, use the ISO C++ conformant name: _read.
See online help for details.
Signed-off-by: Martin Storsjö <martin@martin.st>
The versioning facility in the Solaris linker differs from Linux in 3 ways:
1. It does not support globs in linker scripts for
symbol versioning -- this is a GNU extension.
2. The linker argument is '-M', instead of '--version-script'.
3. It is picky about line endings.
Each symbol or directive must be on a line of it's own.
Let's use make_sunver.pl from GCC to generate a version script that works
correctly with the Solaris linker. It's function is to correctly expand the
globs in the original generated version script.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This way is sufficient to use the component specific configure variable
and not guard against the global library configure variable in code
that is outside it (e.g. checkasm).
Some gcc-based toolchain would fail to link if the abi set by the
cpuflags does not match the default.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Don't try to detect the float ABI by checking at the toolchain
name or by trying to assemble and link files with eabi_attributes.
This fixes the float ABI detection when building using clang
with -fembed-bitcode, where the current eabi_attributes check
accidentally passes.
This issue was pointed out by James Howe <james.howe@hp.com>.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This avoids having to manually set _WIN32_WINNT in --extra-cflags
when targeting these API families, which only was necessary to
work around configure setting _WIN32_WINNT to an older version
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
This macro identifies whether VFPv3 is available; MSVC defaults
to hardfloat (except for older MSVC versions for CE, targeting
ARMv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is only necessary on MSVC 2010/2012 (and possibly on some
ICL versions). This both avoids an extra hack on newer MSVC
versions, and better documents what the extra compiler option
is used for.
Signed-off-by: Martin Storsjö <martin@martin.st>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
The -nologo- option is the inverse of -nologo, reenabling printing the
"logo" version header. This is useful if the compiler actually is a
wrapper that forces -nologo.
Signed-off-by: Martin Storsjö <martin@martin.st>
Export symbols by name rather then ordinal.
Remove PROTMODE directive as it does not make sense for 32 bit library.
Also silences a warning from some linkers.
Signed-off-by: Dave Yeo <dave.r.yeo@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The C runtime C99 compatibility had been improved a lot and it now
rejects some of the compatibility defines provided for the older
versions.
Many thanks to Ray for the time spent testing.
Bug-Id: 864
CC: libav-stable@libav.org
These are only necessary once/if avconv gets support for this hwaccel.
While that obviously is desireable, we don't have it yet, and they
currently only are a distraction.
Signed-off-by: Martin Storsjö <martin@martin.st>
The only need to be listed if they are to be used in ifdefs from
within the code - config items used as dependencies only within
configure don't need to be exported.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes dxva2 detection (i.e. correctly realizes that it isn't
available) for WinRT, where dxva2api.h does exist, but these definitions
are omitted (when targeting the API subsets).
Ideally we should rather check for e.g. DXVA2_ConfigPictureDecode,
but configure might fail to find that definition due to _WIN32_WINNT
not being set to the right value during configure. (libavcodec/dxva2.h
manually overrides the _WIN32_WINNT define.)
This allows removing hardcoded --disable-dxva2 from such build
configurations.
Signed-off-by: Martin Storsjö <martin@martin.st>
mpz_import and mpz_export were added in GMP 4.1, in 2002.
This simplifies the DH code by clarifying that it only uses pure
bignum functions, no other parts of nettle/hogweed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the OpenSSL and GnuTLS implementations to their own files. Other
than the connection code (including options) and some boilerplate, no
code is actually shared.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the Multi-library interface to load at runtime x265 libraries
supporting alternative bit depths (e.g. 8bit and 16bit).
The linked library will try to load the library supporting the
pixel format if it is not supported by itself.
Fallback requesting the native library (passing 0 to x265_api_get) if
a library supporting the requested bit depth is not available.
Signed-off-by: Gopu Govindaswamy <gopu@multicorewareinc.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Only MSVC 2010 in x64 mode, in the static msvcrt, had a
stray log2 function (which wasn't available in the headers).
MSVC 2013 has got a proper log2 function though.
Signed-off-by: Martin Storsjö <martin@martin.st>
$cc is the compiler requested as main target compiler, while $_cc
is the actual tool tested in the probe function right now (which
can also be e.g. the host compiler).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default, but can be disbled via the -noautorotate
option.
Based on a patch by Clément Bœsch.
Signed-off-by: Martin Storsjö <martin@martin.st>
Useful to understand where and in what execution state a certain message
is generated. It is enabled only when optimizations are disabled, since
function names are not printed otherwise.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
When all the codepaths using manually set .arch/.fpu code is
behind runtime detection, the elf attributes should be suppressed.
This allows tools to know that the final built binary doesn't
strictly require these extensions.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since not all systems need the libraw1394 dependency, let pkg-config
provide the list of libraries actually needed.
The libdc1394-2.pc file has been included since version 2 (2008-01-05),
so it should be safe to use.
This fixes builds with vc1_parser enabled without vc1_decoder. All
the vc1_decoder object files were included in the vc1_parser line
in libavcodec/Makefile before, but architecture specific object files
for vc1_decoder were not.
Signed-off-by: Martin Storsjö <martin@martin.st>
Compared to existing, common opensource H264 encoders, this can be
useful since it has got a different license (BSD instead of GPL).
Performance- and qualitywise it is comparable to x264 in ultrafast
mode.
Hooking it up as an encoder in libavcodec also simplifies comparing
it against other common encoders.
This requires OpenH264 1.3 or newer. Since the OpenH264 API and ABI
changes frequently, only releases are supported.
To take advantage of the OpenH264 patent offer, the OpenH264 library
must not be redistributed, but downloaded at runtime at the end-user's
system.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows using libraries that are detected via pkg-config with
msvc. (The libraries themselves may have to be built with MSVC
though.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The MoveFileExA is available in the headers regardless which API
subset is targeted, but it is missing in the Windows Phone link
libraries. When targeting Windows Store apps, the function is
available both in the headers and in the link libraries, and thus
there is no indication for the build system that this function
should be avoided - such an indication is only given by the
Windows App Certification Kit, which forbids using the MoveFileExA
function.
Therefore check the WINAPI_FAMILY defines instead, to figure out
which API subset is targeted.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows getting the normal unix semantics, where a rename
allows replacing an existing file.
Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>
simd_align_16 is a configure item that can be enabled or disabled,
it's not a variable containing a list of other configure items
as need_memalign previously. This was broken in eba2233b5.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows writing most code as if they always are is available.
These are ok to use from other libraries even though it's not a
public header, since they only provide an inline declaration, and
doesn't add an actual dependency on lavu internals. (This can be
considered more a build system compatibility fallback than a
libavutil feature.)
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings about passing arguments from incompatible pointer type
when targeting Windows Vista or newer.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This option facilitates testing shared libarary builds: for instance
fate builders do no longer need to set LD_LIBRARY_PATH as the binaries will
get the right search paths hardcoded into their executable file.
This option is only meant to be used for testing purposes: The installed
libraries must not move around in the file system, and doing so will
cause a lot of subtle problems. For more information why using RPATH is
dangerous, please refer to
https://blog.flameeyes.eu/2010/06/the-why-and-how-of-rpath
On mingw64 with c++11 support, the link libraries do contain a
nanosleep function, while it isn't exposed via the headers. Using
check_func_headers instead of a plain check_func fixes this
misdetection.
Signed-off-by: Martin Storsjö <martin@martin.st>
The -MD option (for enabling a dynamically linked crt) gets interpreted
as a cpp option for generating dependency information (into a file named
'-.d', when preprocessing to a pipe). We shouldn't be passing
any and all C compiler flags to armasm (which is a plain assembler,
only with cpp bolted on via gas-preprocessor), but these are the
main conflicting ones.
Signed-off-by: Martin Storsjö <martin@martin.st>
This tries to find the most expressive part of the output of
armcc --vsn to include, giving a compiler identification of
"ARM Compiler 5.04 update 2 (build 82)" instead of just
"ARM Compiler 5.04" for armcc 5.0.
4.x versions of armcc output the following, for "armcc --vsn":
ARM C/C++ Compiler, RVCT4.0 [Build 925]
For evaluation purposes only
Software supplied by: ARM Limited
ARM C/C++ Compiler, 4.1 [Build 894]
For evaluation purposes only
Software supplied by: ARM Limited
5.0 versions output this:
Product: ARM Compiler 5.04
Component: ARM Compiler 5.04 update 2 (build 82)
Tool: armcc [5040081]
For evaluation purposes only
Software supplied by: ARM Limited
Signed-off-by: Martin Storsjö <martin@martin.st>
llvm's integrated assembler supports the AArch64 asm on darwin since
August 2014. So check $as first before using gas-preprocessor.pl via
$gas. Makes the checks specific for that the architecture specific asm
needs. PPC Altivec and AArch64 needs on ':vararg' for macro arguments.
Arm needs in addition the '.altmacro' directive.
Initialise VC1DSPContext for parser as well as for decoder.
Note, the VC-1 code doesn't actually use the function pointer yet.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Check for an instruction that causes the (very old) Apple GCC 4.2
to error out ("unrecognizable insn").
Signed-off-by: Martin Storsjö <martin@martin.st>
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
