FFmpeg/Makefile
Diego Biurrun 1cde611d80 Rename libavtest target to lavftest to better express what it tests.
Also rename related variables to match the new name.

Originally committed as revision 18227 to svn://svn.ffmpeg.org/ffmpeg/trunk
2009-03-29 21:24:04 +00:00

306 lines
10 KiB
Makefile

include config.mak
SRC_DIR = $(SRC_PATH_BARE)
vpath %.texi $(SRC_PATH_BARE)
PROGS-$(CONFIG_FFMPEG) += ffmpeg
PROGS-$(CONFIG_FFPLAY) += ffplay
PROGS-$(CONFIG_FFSERVER) += ffserver
PROGS = $(addsuffix $(EXESUF), $(PROGS-yes))
PROGS_G = $(addsuffix _g$(EXESUF), $(PROGS-yes))
OBJS = $(addsuffix .o, $(PROGS-yes)) cmdutils.o
MANPAGES = $(addprefix doc/, $(addsuffix .1, $(PROGS-yes)))
BASENAMES = ffmpeg ffplay ffserver
ALLPROGS = $(addsuffix $(EXESUF), $(BASENAMES))
ALLPROGS_G = $(addsuffix _g$(EXESUF), $(BASENAMES))
ALLMANPAGES = $(addsuffix .1, $(BASENAMES))
FFLIBS-$(CONFIG_AVFILTER) += avfilter
FFLIBS-$(CONFIG_POSTPROC) += postproc
FFLIBS := avdevice avformat avcodec avutil swscale
DATA_FILES := $(wildcard $(SRC_DIR)/ffpresets/*.ffpreset)
include common.mak
FF_LDFLAGS := $(FFLDFLAGS)
FF_EXTRALIBS := $(FFEXTRALIBS)
FF_DEP_LIBS := $(DEP_LIBS)
ALL_TARGETS-$(BUILD_DOC) += documentation
ifneq ($(PROGS),)
INSTALL_TARGETS-yes += install-progs install-data
INSTALL_TARGETS-$(BUILD_DOC) += install-man
endif
INSTALL_PROGS_TARGETS-$(BUILD_SHARED) = install-libs
all: $(FF_DEP_LIBS) $(PROGS) $(ALL_TARGETS-yes)
$(PROGS): %$(EXESUF): %_g$(EXESUF)
cp -p $< $@
$(STRIP) $@
SUBDIR_VARS := OBJS FFLIBS CLEANFILES DIRS TESTPROGS EXAMPLES \
ALTIVEC-OBJS MMX-OBJS YASM-OBJS-FFT YASM-OBJS
define RESET
$(1) :=
$(1)-yes :=
endef
define DOSUBDIR
$(foreach V,$(SUBDIR_VARS),$(eval $(call RESET,$(V))))
SUBDIR := $(1)/
include $(1)/Makefile
endef
$(foreach D,$(FFLIBS),$(eval $(call DOSUBDIR,lib$(D))))
ffplay_g$(EXESUF): FF_EXTRALIBS += $(SDL_LIBS)
ffserver_g$(EXESUF): FF_LDFLAGS += $(FFSERVERLDFLAGS)
%_g$(EXESUF): %.o cmdutils.o $(FF_DEP_LIBS)
$(CC) $(FF_LDFLAGS) -o $@ $< cmdutils.o $(FF_EXTRALIBS)
tools/%$(EXESUF): tools/%.c
$(CC) $(CFLAGS) $(FF_LDFLAGS) -o $@ $< $(FF_EXTRALIBS)
ffplay.o ffplay.d: CFLAGS += $(SDL_CFLAGS)
cmdutils.o cmdutils.d: version.h
alltools: $(addsuffix $(EXESUF),$(addprefix tools/, cws2fws pktdumper qt-faststart trasher))
documentation: $(addprefix doc/, ffmpeg-doc.html faq.html ffserver-doc.html \
ffplay-doc.html general.html $(ALLMANPAGES))
doc/%.html: doc/%.texi
texi2html -monolithic -number $<
mv $(@F) $@
doc/%.pod: doc/%-doc.texi
doc/texi2pod.pl $< $@
doc/%.1: doc/%.pod
pod2man --section=1 --center=" " --release=" " $< > $@
install: $(INSTALL_TARGETS-yes)
install-progs: $(PROGS) $(INSTALL_PROGS_TARGETS-yes)
install -d "$(BINDIR)"
install -c -m 755 $(PROGS) "$(BINDIR)"
install-data: $(DATA_FILES)
install -d "$(DATADIR)"
install -m 644 $(DATA_FILES) "$(DATADIR)"
install-man: $(MANPAGES)
install -d "$(MANDIR)/man1"
install -m 644 $(MANPAGES) "$(MANDIR)/man1"
uninstall: uninstall-progs uninstall-data uninstall-man
uninstall-progs:
rm -f $(addprefix "$(BINDIR)/", $(ALLPROGS))
uninstall-data:
rm -rf "$(DATADIR)"
uninstall-man:
rm -f $(addprefix "$(MANDIR)/man1/",$(ALLMANPAGES))
testclean:
rm -rf tests/vsynth1 tests/vsynth2 tests/data tests/asynth1.sw tests/*~
clean:: testclean
rm -f $(ALLPROGS) $(ALLPROGS_G)
rm -f doc/*.html doc/*.pod doc/*.1
rm -f tests/seek_test$(EXESUF)
rm -f $(addprefix tests/,$(addsuffix $(HOSTEXESUF),audiogen videogen rotozoom tiny_psnr))
rm -f $(addprefix tools/,$(addsuffix $(EXESUF),cws2fws pktdumper qt-faststart trasher))
distclean::
rm -f version.h config.*
# regression tests
check: test checkheaders
fulltest test: codectest lavftest seektest
FFMPEG_REFFILE = $(SRC_PATH)/tests/ffmpeg.regression.ref
FFSERVER_REFFILE = $(SRC_PATH)/tests/ffserver.regression.ref
LAVF_REFFILE = $(SRC_PATH)/tests/libav.regression.ref
ROTOZOOM_REFFILE = $(SRC_PATH)/tests/rotozoom.regression.ref
SEEK_REFFILE = $(SRC_PATH)/tests/seek.regression.ref
CODEC_TESTS = $(addprefix regtest-, \
mpeg \
mpeg2 \
mpeg2thread \
msmpeg4v2 \
msmpeg4 \
wmv1 \
wmv2 \
h261 \
h263 \
h263p \
mpeg4 \
huffyuv \
rc \
mpeg4adv \
mpeg4thread \
error \
mpeg4nr \
mpeg1b \
mjpeg \
ljpeg \
jpegls \
rv10 \
rv20 \
asv1 \
asv2 \
flv \
ffv1 \
snow \
snowll \
dv \
dv50 \
svq1 \
flashsv \
mp2 \
ac3 \
g726 \
adpcm_ima_wav \
adpcm_ima_qt \
adpcm_ms \
adpcm_yam \
adpcm_swf \
flac \
wma \
pcm \
)
LAVF_TESTS = $(addprefix regtest-, \
avi \
asf \
rm \
mpg \
mxf \
ts \
swf \
ffm \
flv_fmt \
mov \
dv_fmt \
gxf \
nut \
mkv \
pbmpipe \
pgmpipe \
ppmpipe \
gif \
yuv4mpeg \
pgm \
ppm \
bmp \
tga \
tiff \
sgi \
jpg \
wav \
alaw \
mulaw \
au \
mmf \
aiff \
voc \
ogg \
pixfmt \
pcx \
)
REGFILES = $(addprefix tests/data/,$(addsuffix .$(1),$(2:regtest-%=%)))
CODEC_ROTOZOOM = $(call REGFILES,rotozoom.regression,$(CODEC_TESTS))
CODEC_VSYNTH = $(call REGFILES,vsynth.regression,$(CODEC_TESTS))
LAVF_REGFILES = $(call REGFILES,lavf.regression,$(LAVF_TESTS))
LAVF_REG = tests/data/lavf.regression
ROTOZOOM_REG = tests/data/rotozoom.regression
VSYNTH_REG = tests/data/vsynth.regression
ifneq ($(CONFIG_ZLIB),yes)
regtest-flashsv codectest: zlib-error
endif
zlib-error:
@echo
@echo "This regression test requires zlib."
@echo
@exit 1
codectest: $(VSYNTH_REG) $(ROTOZOOM_REG)
diff -u -w $(FFMPEG_REFFILE) $(VSYNTH_REG)
diff -u -w $(ROTOZOOM_REFFILE) $(ROTOZOOM_REG)
lavftest: $(LAVF_REG)
diff -u -w $(LAVF_REFFILE) $(LAVF_REG)
$(VSYNTH_REG) $(ROTOZOOM_REG) $(LAVF_REG):
cat $^ > $@
$(LAVF_REG): $(LAVF_REGFILES)
$(ROTOZOOM_REG): $(CODEC_ROTOZOOM)
$(VSYNTH_REG): $(CODEC_VSYNTH)
$(CODEC_VSYNTH) $(CODEC_ROTOZOOM): $(CODEC_TESTS)
$(LAVF_REGFILES): $(LAVF_TESTS)
$(CODEC_TESTS) $(LAVF_TESTS): regtest-ref
regtest-ref: ffmpeg$(EXESUF) tests/vsynth1/00.pgm tests/vsynth2/00.pgm tests/asynth1.sw
$(CODEC_TESTS) regtest-ref: tests/tiny_psnr$(HOSTEXESUF)
$(SRC_PATH)/tests/regression.sh $@ vsynth tests/vsynth1 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
$(SRC_PATH)/tests/regression.sh $@ rotozoom tests/vsynth2 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
$(LAVF_TESTS):
$(SRC_PATH)/tests/regression.sh $@ lavf tests/vsynth1 b "$(TARGET_EXEC)" "$(TARGET_PATH)"
seektest: codectest lavftest tests/seek_test$(EXESUF)
$(SRC_PATH)/tests/seek-regression.sh $(SEEK_REFFILE) "$(TARGET_EXEC)" "$(TARGET_PATH)"
servertest: ffserver$(EXESUF) tests/vsynth1/00.pgm tests/asynth1.sw
@echo
@echo "Unfortunately ffserver is broken and therefore its regression"
@echo "test fails randomly. Treat the results accordingly."
@echo
$(SRC_PATH)/tests/server-regression.sh $(FFSERVER_REFFILE) $(SRC_PATH)/tests/ffserver.conf
tests/vsynth1/00.pgm: tests/videogen$(HOSTEXESUF)
mkdir -p tests/vsynth1
$(BUILD_ROOT)/$< 'tests/vsynth1/'
tests/vsynth2/00.pgm: tests/rotozoom$(HOSTEXESUF)
mkdir -p tests/vsynth2
$(BUILD_ROOT)/$< 'tests/vsynth2/' $(SRC_PATH)/tests/lena.pnm
tests/asynth1.sw: tests/audiogen$(HOSTEXESUF)
$(BUILD_ROOT)/$< $@
tests/%$(HOSTEXESUF): tests/%.c
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $< $(HOSTLIBS)
tests/seek_test$(EXESUF): tests/seek_test.c $(FF_DEP_LIBS)
$(CC) $(FF_LDFLAGS) $(CFLAGS) -o $@ $< $(FF_EXTRALIBS)
.PHONY: documentation *test regtest-* zlib-error alltools check