FFmpeg/Makefile
Måns Rullgård 82bb33290e Allow different executable suffix for host and target
Originally committed as revision 17885 to svn://svn.ffmpeg.org/ffmpeg/trunk
2009-03-08 22:11:24 +00:00

306 lines
10 KiB
Makefile

include config.mak
SRC_DIR = $(SRC_PATH_BARE)
vpath %.texi $(SRC_PATH_BARE)
PROGS-$(CONFIG_FFMPEG) += ffmpeg
PROGS-$(CONFIG_FFPLAY) += ffplay
PROGS-$(CONFIG_FFSERVER) += ffserver
PROGS = $(addsuffix $(EXESUF), $(PROGS-yes))
PROGS_G = $(addsuffix _g$(EXESUF), $(PROGS-yes))
OBJS = $(addsuffix .o, $(PROGS-yes)) cmdutils.o
MANPAGES = $(addprefix doc/, $(addsuffix .1, $(PROGS-yes)))
BASENAMES = ffmpeg ffplay ffserver
ALLPROGS = $(addsuffix $(EXESUF), $(BASENAMES))
ALLPROGS_G = $(addsuffix _g$(EXESUF), $(BASENAMES))
ALLMANPAGES = $(addsuffix .1, $(BASENAMES))
FFLIBS-$(CONFIG_AVFILTER) += avfilter
FFLIBS-$(CONFIG_POSTPROC) += postproc
FFLIBS := avdevice avformat avcodec avutil swscale
DATA_FILES := $(wildcard $(SRC_DIR)/ffpresets/*.ffpreset)
include common.mak
FF_LDFLAGS := $(FFLDFLAGS)
FF_EXTRALIBS := $(FFEXTRALIBS)
FF_DEP_LIBS := $(DEP_LIBS)
ALL_TARGETS-$(BUILD_DOC) += documentation
ifneq ($(PROGS),)
INSTALL_TARGETS-yes += install-progs install-data
INSTALL_TARGETS-$(BUILD_DOC) += install-man
endif
INSTALL_PROGS_TARGETS-$(BUILD_SHARED) = install-libs
all: $(FF_DEP_LIBS) $(PROGS) $(ALL_TARGETS-yes)
$(PROGS): %$(EXESUF): %_g$(EXESUF)
cp -p $< $@
$(STRIP) $@
SUBDIR_VARS := OBJS FFLIBS CLEANFILES DIRS TESTS
define RESET
$(1) :=
$(1)-yes :=
endef
define DOSUBDIR
$(foreach V,$(SUBDIR_VARS),$(eval $(call RESET,$(V))))
SUBDIR := $(1)/
include $(1)/Makefile
endef
$(foreach D,$(FFLIBS),$(eval $(call DOSUBDIR,lib$(D))))
ffplay_g$(EXESUF): FF_EXTRALIBS += $(SDL_LIBS)
ffserver_g$(EXESUF): FF_LDFLAGS += $(FFSERVERLDFLAGS)
%_g$(EXESUF): %.o cmdutils.o $(FF_DEP_LIBS)
$(CC) $(FF_LDFLAGS) -o $@ $< cmdutils.o $(FF_EXTRALIBS)
output_example$(EXESUF): output_example.o $(FF_DEP_LIBS)
$(CC) $(CFLAGS) $(FF_LDFLAGS) -o $@ $< $(FF_EXTRALIBS)
tools/%$(EXESUF): tools/%.c
$(CC) $(CFLAGS) $(FF_LDFLAGS) -o $@ $< $(FF_EXTRALIBS)
ffplay.o ffplay.d: CFLAGS += $(SDL_CFLAGS)
cmdutils.o cmdutils.d: version.h
alltools: $(addsuffix $(EXESUF),$(addprefix tools/, cws2fws pktdumper qt-faststart trasher))
documentation: $(addprefix doc/, ffmpeg-doc.html faq.html ffserver-doc.html \
ffplay-doc.html general.html $(ALLMANPAGES))
doc/%.html: doc/%.texi
texi2html -monolithic -number $<
mv $(@F) $@
doc/%.pod: doc/%-doc.texi
doc/texi2pod.pl $< $@
doc/%.1: doc/%.pod
pod2man --section=1 --center=" " --release=" " $< > $@
install: $(INSTALL_TARGETS-yes)
install-progs: $(PROGS) $(INSTALL_PROGS_TARGETS-yes)
install -d "$(BINDIR)"
install -c -m 755 $(PROGS) "$(BINDIR)"
install-data: $(DATA_FILES)
install -d "$(DATADIR)"
install -m 644 $(DATA_FILES) "$(DATADIR)"
install-man: $(MANPAGES)
install -d "$(MANDIR)/man1"
install -m 644 $(MANPAGES) "$(MANDIR)/man1"
uninstall: uninstall-progs uninstall-data uninstall-man
uninstall-progs:
rm -f $(addprefix "$(BINDIR)/", $(ALLPROGS))
uninstall-data:
rm -rf "$(DATADIR)"
uninstall-man:
rm -f $(addprefix "$(MANDIR)/man1/",$(ALLMANPAGES))
testclean:
rm -rf tests/vsynth1 tests/vsynth2 tests/data tests/asynth1.sw tests/*~
clean:: testclean
rm -f $(ALLPROGS) $(ALLPROGS_G) output_example$(EXESUF)
rm -f doc/*.html doc/*.pod doc/*.1
rm -f tests/seek_test$(EXESUF)
rm -f $(addprefix tests/,$(addsuffix $(HOSTEXESUF),audiogen videogen rotozoom tiny_psnr))
rm -f $(addprefix tools/,$(addsuffix $(EXESUF),cws2fws pktdumper qt-faststart trasher))
distclean::
rm -f version.h config.*
# regression tests
check: test checkheaders
fulltest test: codectest libavtest seektest
FFMPEG_REFFILE = $(SRC_PATH)/tests/ffmpeg.regression.ref
FFSERVER_REFFILE = $(SRC_PATH)/tests/ffserver.regression.ref
LIBAV_REFFILE = $(SRC_PATH)/tests/libav.regression.ref
ROTOZOOM_REFFILE = $(SRC_PATH)/tests/rotozoom.regression.ref
SEEK_REFFILE = $(SRC_PATH)/tests/seek.regression.ref
CODEC_TESTS = $(addprefix regtest-, \
mpeg \
mpeg2 \
mpeg2thread \
msmpeg4v2 \
msmpeg4 \
wmv1 \
wmv2 \
h261 \
h263 \
h263p \
mpeg4 \
huffyuv \
rc \
mpeg4adv \
mpeg4thread \
error \
mpeg4nr \
mpeg1b \
mjpeg \
ljpeg \
jpegls \
rv10 \
rv20 \
asv1 \
asv2 \
flv \
ffv1 \
snow \
snowll \
dv \
dv50 \
svq1 \
flashsv \
mp2 \
ac3 \
g726 \
adpcm_ima_wav \
adpcm_ima_qt \
adpcm_ms \
adpcm_yam \
adpcm_swf \
flac \
wma \
pcm \
)
LAVF_TESTS = $(addprefix regtest-, \
avi \
asf \
rm \
mpg \
ts \
swf \
ffm \
flv_fmt \
mov \
dv_fmt \
gxf \
nut \
mkv \
pbmpipe \
pgmpipe \
ppmpipe \
gif \
yuv4mpeg \
pgm \
ppm \
bmp \
tga \
tiff \
sgi \
jpg \
wav \
alaw \
mulaw \
au \
mmf \
aiff \
voc \
ogg \
pixfmt \
)
REGFILES = $(addprefix tests/data/,$(addsuffix .$(1),$(2:regtest-%=%)))
CODEC_ROTOZOOM = $(call REGFILES,rotozoom.regression,$(CODEC_TESTS))
CODEC_VSYNTH = $(call REGFILES,vsynth.regression,$(CODEC_TESTS))
LAVF_REGFILES = $(call REGFILES,lavf.regression,$(LAVF_TESTS))
LAVF_REG = tests/data/lavf.regression
ROTOZOOM_REG = tests/data/rotozoom.regression
VSYNTH_REG = tests/data/vsynth.regression
ifneq ($(CONFIG_ZLIB),yes)
regtest-flashsv codectest: zlib-error
endif
zlib-error:
@echo
@echo "This regression test requires zlib."
@echo
@exit 1
codectest: $(VSYNTH_REG) $(ROTOZOOM_REG)
diff -u -w $(FFMPEG_REFFILE) $(VSYNTH_REG)
diff -u -w $(ROTOZOOM_REFFILE) $(ROTOZOOM_REG)
libavtest: $(LAVF_REG)
diff -u -w $(LIBAV_REFFILE) $(LAVF_REG)
$(VSYNTH_REG) $(ROTOZOOM_REG) $(LAVF_REG):
cat $^ > $@
$(LAVF_REG): $(LAVF_REGFILES)
$(ROTOZOOM_REG): $(CODEC_ROTOZOOM)
$(VSYNTH_REG): $(CODEC_VSYNTH)
$(CODEC_VSYNTH) $(CODEC_ROTOZOOM): $(CODEC_TESTS)
$(LAVF_REGFILES): $(LAVF_TESTS)
$(CODEC_TESTS) $(LAVF_TESTS): regtest-ref
regtest-ref: ffmpeg$(EXESUF) tests/vsynth1/00.pgm tests/vsynth2/00.pgm tests/asynth1.sw
$(CODEC_TESTS) regtest-ref: tests/tiny_psnr$(HOSTEXESUF)
$(SRC_PATH)/tests/regression.sh $@ vsynth tests/vsynth1 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
$(SRC_PATH)/tests/regression.sh $@ rotozoom tests/vsynth2 a "$(TARGET_EXEC)" "$(TARGET_PATH)"
$(LAVF_TESTS):
$(SRC_PATH)/tests/regression.sh $@ lavf tests/vsynth1 b "$(TARGET_EXEC)" "$(TARGET_PATH)"
seektest: codectest libavtest tests/seek_test$(EXESUF)
$(SRC_PATH)/tests/seek_test.sh $(SEEK_REFFILE) "$(TARGET_EXEC)" "$(TARGET_PATH)"
servertest: ffserver$(EXESUF) tests/vsynth1/00.pgm tests/asynth1.sw
@echo
@echo "Unfortunately ffserver is broken and therefore its regression"
@echo "test fails randomly. Treat the results accordingly."
@echo
$(SRC_PATH)/tests/server-regression.sh $(FFSERVER_REFFILE) $(SRC_PATH)/tests/test.conf
tests/vsynth1/00.pgm: tests/videogen$(HOSTEXESUF)
mkdir -p tests/vsynth1
$(BUILD_ROOT)/$< 'tests/vsynth1/'
tests/vsynth2/00.pgm: tests/rotozoom$(HOSTEXESUF)
mkdir -p tests/vsynth2
$(BUILD_ROOT)/$< 'tests/vsynth2/' $(SRC_PATH)/tests/lena.pnm
tests/asynth1.sw: tests/audiogen$(HOSTEXESUF)
$(BUILD_ROOT)/$< $@
tests/%$(HOSTEXESUF): tests/%.c
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $< $(HOSTLIBS)
tests/seek_test$(EXESUF): tests/seek_test.c $(FF_DEP_LIBS)
$(CC) $(FF_LDFLAGS) $(CFLAGS) -o $@ $< $(FF_EXTRALIBS)
.PHONY: lib documentation *test regtest-* swscale-error zlib-error alltools check