diff --git a/Cobalt/Cobalt.vcxproj b/Cobalt/Cobalt.vcxproj
index a468f06..765507c 100644
--- a/Cobalt/Cobalt.vcxproj
+++ b/Cobalt/Cobalt.vcxproj
@@ -145,10 +145,10 @@
-
+
diff --git a/Cobalt/Cobalt.vcxproj.filters b/Cobalt/Cobalt.vcxproj.filters
index e323d34..fde1e5b 100644
--- a/Cobalt/Cobalt.vcxproj.filters
+++ b/Cobalt/Cobalt.vcxproj.filters
@@ -20,9 +20,6 @@
-
- Header Files
-
Header Files
@@ -35,6 +32,9 @@
Header Files
+
+ Header Files
+
diff --git a/Cobalt/curldefinitions.h b/Cobalt/curldefinitions.h
deleted file mode 100644
index 308aa50..0000000
--- a/Cobalt/curldefinitions.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#pragma once
-
-//got these definitions from reversing curl
-#define CURLOPT_URL 0x2712
-#define CURLOPT_NOPROXY 0x27C1
-#define CURLOPT_SSL_VERIFYPEER 0x40
-#define CURLOPT_SSL_VERIFYHOST 0x51
-#define CURLOPT_PINNEDPUBLICKEY 0x27F6
-#define CURLOPT_POSTFIELDS 0x271F
-
-//got from curl includes
-typedef enum {
- CURLE_OK = 0,
- CURLE_UNSUPPORTED_PROTOCOL, /* 1 */
- CURLE_FAILED_INIT, /* 2 */
- CURLE_URL_MALFORMAT, /* 3 */
- CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for
- 7.17.0, reused in April 2011 for 7.21.5] */
- CURLE_COULDNT_RESOLVE_PROXY, /* 5 */
- CURLE_COULDNT_RESOLVE_HOST, /* 6 */
- CURLE_COULDNT_CONNECT, /* 7 */
- CURLE_WEIRD_SERVER_REPLY, /* 8 */
- CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server
- due to lack of access - when login fails
- this is not returned. */
- CURLE_FTP_ACCEPT_FAILED, /* 10 - [was obsoleted in April 2006 for
- 7.15.4, reused in Dec 2011 for 7.24.0]*/
- CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */
- CURLE_FTP_ACCEPT_TIMEOUT, /* 12 - timeout occurred accepting server
- [was obsoleted in August 2007 for 7.17.0,
- reused in Dec 2011 for 7.24.0]*/
- CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */
- CURLE_FTP_WEIRD_227_FORMAT, /* 14 */
- CURLE_FTP_CANT_GET_HOST, /* 15 */
- CURLE_HTTP2, /* 16 - A problem in the http2 framing layer.
- [was obsoleted in August 2007 for 7.17.0,
- reused in July 2014 for 7.38.0] */
- CURLE_FTP_COULDNT_SET_TYPE, /* 17 */
- CURLE_PARTIAL_FILE, /* 18 */
- CURLE_FTP_COULDNT_RETR_FILE, /* 19 */
- CURLE_OBSOLETE20, /* 20 - NOT USED */
- CURLE_QUOTE_ERROR, /* 21 - quote command failure */
- CURLE_HTTP_RETURNED_ERROR, /* 22 */
- CURLE_WRITE_ERROR, /* 23 */
- CURLE_OBSOLETE24, /* 24 - NOT USED */
- CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */
- CURLE_READ_ERROR, /* 26 - couldn't open/read from file */
- CURLE_OUT_OF_MEMORY, /* 27 */
- /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error
- instead of a memory allocation error if CURL_DOES_CONVERSIONS
- is defined
- */
- CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */
- CURLE_OBSOLETE29, /* 29 - NOT USED */
- CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */
- CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */
- CURLE_OBSOLETE32, /* 32 - NOT USED */
- CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */
- CURLE_HTTP_POST_ERROR, /* 34 */
- CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */
- CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
- CURLE_FILE_COULDNT_READ_FILE, /* 37 */
- CURLE_LDAP_CANNOT_BIND, /* 38 */
- CURLE_LDAP_SEARCH_FAILED, /* 39 */
- CURLE_OBSOLETE40, /* 40 - NOT USED */
- CURLE_FUNCTION_NOT_FOUND, /* 41 - NOT USED starting with 7.53.0 */
- CURLE_ABORTED_BY_CALLBACK, /* 42 */
- CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */
- CURLE_OBSOLETE44, /* 44 - NOT USED */
- CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */
- CURLE_OBSOLETE46, /* 46 - NOT USED */
- CURLE_TOO_MANY_REDIRECTS, /* 47 - catch endless re-direct loops */
- CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */
- CURLE_TELNET_OPTION_SYNTAX, /* 49 - Malformed telnet option */
- CURLE_OBSOLETE50, /* 50 - NOT USED */
- CURLE_OBSOLETE51, /* 51 - NOT USED */
- CURLE_GOT_NOTHING, /* 52 - when this is a specific error */
- CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */
- CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as
- default */
- CURLE_SEND_ERROR, /* 55 - failed sending network data */
- CURLE_RECV_ERROR, /* 56 - failure in receiving network data */
- CURLE_OBSOLETE57, /* 57 - NOT IN USE */
- CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */
- CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */
- CURLE_PEER_FAILED_VERIFICATION, /* 60 - peer's certificate or fingerprint
- wasn't verified fine */
- CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */
- CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */
- CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */
- CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */
- CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind
- that failed */
- CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */
- CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not
- accepted and we failed to login */
- CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */
- CURLE_TFTP_PERM, /* 69 - permission problem on server */
- CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */
- CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */
- CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */
- CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */
- CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */
- CURLE_CONV_FAILED, /* 75 - conversion failed */
- CURLE_CONV_REQD, /* 76 - caller must register conversion
- callbacks using curl_easy_setopt options
- CURLOPT_CONV_FROM_NETWORK_FUNCTION,
- CURLOPT_CONV_TO_NETWORK_FUNCTION, and
- CURLOPT_CONV_FROM_UTF8_FUNCTION */
- CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing
- or wrong format */
- CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */
- CURLE_SSH, /* 79 - error from the SSH layer, somewhat
- generic so the error message will be of
- interest when this has happened */
-
- CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL
- connection */
- CURLE_AGAIN, /* 81 - socket is not ready for send/recv,
- wait till it's ready and try again (Added
- in 7.18.2) */
- CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or
- wrong format (Added in 7.19.0) */
- CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in
- 7.19.0) */
- CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */
- CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */
- CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */
- CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */
- CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */
- CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the
- session will be queued */
- CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not
- match */
- CURLE_SSL_INVALIDCERTSTATUS, /* 91 - invalid certificate status */
- CURLE_HTTP2_STREAM, /* 92 - stream error in HTTP/2 framing layer
- */
- CURLE_RECURSIVE_API_CALL, /* 93 - an api function was called from
- inside a callback */
- CURLE_AUTH_ERROR, /* 94 - an authentication function returned an
- error */
- CURLE_HTTP3, /* 95 - An HTTP/3 layer problem */
- CURL_LAST /* never use! */
-} CURLcode;
-
-typedef void CURL;
\ No newline at end of file
diff --git a/Cobalt/curlhook.h b/Cobalt/curlhook.h
index af66c6e..1c2c30a 100644
--- a/Cobalt/curlhook.h
+++ b/Cobalt/curlhook.h
@@ -3,71 +3,81 @@
#include
#include
-#include "curldefinitions.h"
#include "memcury.h"
#include "settings.h"
+#include "../vendor/cURL/curl.h"
+#include "url.h"
+
// #define HYBRID_ENABLED
-auto (*curl_easy_setopt_original)(CURL* Curl, uintptr_t opt, ...)->CURLcode;
+inline CURLcode(*CurlSetOpt)(struct Curl_easy*, CURLoption, va_list) = nullptr;
+inline CURLcode(*CurlEasySetOpt)(struct Curl_easy*, CURLoption, ...) = nullptr;
-//This routine is used for setting up curl. we will be hijacking this to change the values.
-auto Hijacked_curl_easy_setopt(CURL* Curl, uintptr_t opt, va_list info) -> CURLcode
+inline CURLcode CurlSetOpt_(struct Curl_easy* data, CURLoption option, ...)
{
- int OFF = 0;
- switch (opt)
- {
- case CURLOPT_NOPROXY:
- return curl_easy_setopt_original(Curl, opt, "");
- break;
+ va_list arg;
+ va_start(arg, option);
- case CURLOPT_SSL_VERIFYPEER:
- return curl_easy_setopt_original(Curl, opt, OFF);
- break;
- case CURLOPT_SSL_VERIFYHOST:
- return curl_easy_setopt_original(Curl, opt, OFF);
- break;
- case CURLOPT_PINNEDPUBLICKEY:
- return CURLcode::CURLE_OK;
- break;
- case CURLOPT_URL:
- std::string url = info;
- std::regex Host(("(.*).ol.epicgames.com"));
-#ifdef HYBRID_ENABLED
- if (std::regex_search(info, std::regex(("/fortnite/api/cloudstorage/system")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- else if (std::regex_search(info, std::regex(("/fortnite/api/v2/versioncheck/")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- else if (std::regex_search(info, std::regex(("/fortnite/api/game/v2/profile")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- else if (std::regex_search(info, std::regex(("/content/api/pages/fortnite-game")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- else if (std::regex_search(info, std::regex(("/affiliate/api/public/affiliates/slug")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- else if (std::regex_search(info, std::regex(("/socialban/api/public/v1")))) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
- /* else if (std::regex_search(info, std::regex(ENC("player.platform")))) { // idk if this even works
- if (version == S13)
- {
- url = std::regex_replace(info, Host, "IOS");
- Log(ENC("Changed Windows to IOS"));
- }
- } */
-#else
- if (std::regex_search(info, Host)) {
- url = std::regex_replace(info, Host, REDIRECT_TO_HOST);
- }
-#endif
- return curl_easy_setopt_original(Curl, opt, url.c_str());
- break;
- }
- return curl_easy_setopt_original(Curl, opt, info);
+ const auto result = CurlSetOpt(data, option, arg);
+
+ va_end(arg);
+ return result;
}
+#define XOR
+
+inline CURLcode CurlEasySetOptDetour(struct Curl_easy* data, CURLoption tag, ...)
+{
+ va_list arg;
+ va_start(arg, tag);
+
+ CURLcode result = {};
+
+ if (!data) return CURLE_BAD_FUNCTION_ARGUMENT;
+
+ //Ssl bypass
+ if (tag == CURLOPT_SSL_VERIFYPEER)
+ {
+ result = CurlSetOpt_(data, tag, 0);
+ }
+
+ //Disable Proxy
+ if (tag == CURLOPT_PROXY)
+ {
+ result = CurlSetOpt_(data, tag, "");
+ }
+
+ //URL redirection
+ else if (tag == CURLOPT_URL)
+ {
+ std::string url = va_arg(arg, char*);
+
+ Uri uri = Uri::Parse(url);
+
+#ifdef URL_HOST
+
+ if (uri.Host.ends_with(XOR("ol.epicgames.com"))
+ || uri.Host.ends_with(XOR(".akamaized.net"))
+ || uri.Host.ends_with(XOR("on.epicgames.com"))
+ || uri.Host.ends_with(XOR("game-social.epicgames.com"))
+ || uri.Host.contains(XOR("superawesome.com")))
+ {
+ url = Uri::CreateUri(URL_PROTOCOL, URL_HOST, URL_PORT, uri.Path, uri.QueryString);
+ }
+
+#endif
+ result = CurlSetOpt_(data, tag, url.c_str());
+ }
+
+ else
+ {
+ result = CurlSetOpt(data, tag, arg);
+ }
+
+ va_end(arg);
+ return result;
+}
+
+
__int64 sigscan(const std::string& Str) { return Memcury::Scanner::FindPattern(Str.c_str()).Get(); }
\ No newline at end of file
diff --git a/Cobalt/dllmain.cpp b/Cobalt/dllmain.cpp
index 09dc08a..9cd3d64 100644
--- a/Cobalt/dllmain.cpp
+++ b/Cobalt/dllmain.cpp
@@ -21,7 +21,13 @@ bool InitializeCurlHook()
if (!CurlEasySetOptAddr)
{
- CurlEasySetOptAddr = sigscan("89 54 24 10 4C 89 44 24 18 4C 89 4C 24 20 48 83 EC 28 48 85 C9 75 08 8D 41 2B 48 83 C4 28 C3 4C");
+ std::cout << "Fallback!\n";
+
+ while (!CurlEasySetOptAddr)
+ {
+ CurlEasySetOptAddr = sigscan("89 54 24 10 4C 89 44 24 18 4C 89 4C 24 20 48 83 EC 28 48 85 C9 75 08 8D 41 2B 48 83 C4 28 C3 4C");
+ Sleep(200);
+ }
}
if (!CurlEasySetOptAddr)
@@ -30,15 +36,30 @@ bool InitializeCurlHook()
return false;
}
- curl_easy_setopt_original = decltype(curl_easy_setopt_original)(CurlEasySetOptAddr);
+ auto CurlSetOptAddr = sigscan("48 89 5C 24 08 48 89 6C 24 10 48 89 74 24 18 57 48 83 EC 30 33 ED 49 8B F0 48 8B D9");
+
+ if (!CurlSetOptAddr)
+ {
+ CurlSetOptAddr = sigscan("48 89 5C 24 08 48 89 6C 24 10 56 57 41 56 48 83 EC 50 33 ED 49 8B F0 8B DA 48 8B F9");
+ }
+
+ if (!CurlSetOptAddr)
+ {
+ std::cout << "Failed to find CurlSetOptAddr! But we will go ahead..\n";
+ }
+
+ CurlEasySetOpt = decltype(CurlEasySetOpt)(CurlEasySetOptAddr);
+ CurlSetOpt = decltype(CurlSetOpt)(CurlSetOptAddr);
if (FindPushWidget())
{
- DetoursEasy(curl_easy_setopt_original, Hijacked_curl_easy_setopt);
+ DetoursEasy(CurlEasySetOpt, CurlEasySetOptDetour);
}
else
{
- Memcury::VEHHook::AddHook(curl_easy_setopt_original, Hijacked_curl_easy_setopt); // TODO find a better way to "bypass" UAC.
+ // TODO find a better way to "bypass" UAC (aka switch off VEH hooks)
+
+ Memcury::VEHHook::AddHook(CurlEasySetOpt, CurlEasySetOptDetour);
}
return true;
@@ -74,6 +95,8 @@ DWORD WINAPI Main(LPVOID)
FILE* fptr;
freopen_s(&fptr, "CONOUT$", "w+", stdout);
+ Memcury::VEHHook::Init();
+
bool curlResult = InitializeCurlHook();
InitializeExitHook();
diff --git a/Cobalt/settings.h b/Cobalt/settings.h
index c3e7a41..af9922c 100644
--- a/Cobalt/settings.h
+++ b/Cobalt/settings.h
@@ -1,3 +1,5 @@
#pragma once
-#define REDIRECT_TO_HOST "127.0.0.1:3551"
\ No newline at end of file
+#define URL_PROTOCOL XOR("http")
+#define URL_HOST XOR("127.0.0.1")
+#define URL_PORT XOR("3551")
\ No newline at end of file
diff --git a/Cobalt/url.h b/Cobalt/url.h
new file mode 100644
index 0000000..a6e0f5f
--- /dev/null
+++ b/Cobalt/url.h
@@ -0,0 +1,91 @@
+#pragma once
+#include
+#include
+#include
+#include
+
+struct Uri
+{
+private:
+ typedef std::string_view::const_iterator iterator_t;
+
+public:
+ std::string_view Protocol, Host, Port, Path, QueryString;
+
+ static Uri Parse(const std::string_view& uri)
+ {
+ Uri result;
+
+ if (uri.length() == 0) return result;
+
+ iterator_t uriEnd = uri.end();
+
+ iterator_t queryStart = std::find(uri.begin(), uriEnd, '?');
+
+ iterator_t protocolStart = uri.begin();
+ iterator_t protocolEnd = std::find(protocolStart, uriEnd, ':');
+
+ if (protocolEnd != uriEnd)
+ {
+ std::string_view prot = &*(protocolEnd);
+ if ((prot.length() > 3) && (prot.substr(0, 3) == "://"))
+ {
+ result.Protocol = make_string_view(uri, protocolStart, protocolEnd);
+ protocolEnd += 3;
+ }
+ else protocolEnd = uri.begin();
+ }
+ else protocolEnd = uri.begin();
+
+ iterator_t hostStart = protocolEnd;
+ iterator_t pathStart = std::find(hostStart, uriEnd, '/');
+
+ iterator_t hostEnd = std::find(protocolEnd, (pathStart != uriEnd) ? pathStart : queryStart, ':');
+
+ result.Host = make_string_view(uri, hostStart, hostEnd);
+
+ if ((hostEnd != uriEnd) && ((&*(hostEnd))[0] == ':'))
+ {
+ ++hostEnd;
+ iterator_t portEnd = (pathStart != uriEnd) ? pathStart : queryStart;
+ result.Port = make_string_view(uri, hostEnd, portEnd);
+ }
+
+ if (pathStart != uriEnd) result.Path = make_string_view(uri, pathStart, queryStart);
+
+ if (queryStart != uriEnd) result.QueryString = make_string_view(uri, queryStart, uri.end());
+
+ return result;
+ }
+
+ static std::string CreateUri(std::string_view Protocol, std::string_view Host, std::string_view Port, std::string_view Path, std::string_view QueryString)
+ {
+ std::ostringstream str;
+ if (!Protocol.empty())
+ {
+ str.write(Protocol.data(), Protocol.size());
+ str.write("://", 3);
+ }
+ str.write(Host.data(), Host.size());
+ if (!Port.empty())
+ {
+ str.write(":", 1);
+ str.write(Port.data(), Port.size());
+ }
+ if (!Path.empty())
+ {
+ str.write(Path.data(), Path.size());
+ }
+ if (!QueryString.empty())
+ {
+ str.write(QueryString.data(), QueryString.size());
+ }
+ return str.str();
+ }
+
+private:
+ static constexpr std::string_view make_string_view(const std::string_view& base, iterator_t first, iterator_t last)
+ {
+ return base.substr(std::distance(base.begin(), first), std::distance(first, last));
+ }
+};
diff --git a/README.md b/README.md
index ba5ca18..4e61897 100644
--- a/README.md
+++ b/README.md
@@ -4,5 +4,4 @@ SSL Bypass for Fortnite.
# Credits
Memcury - https://github.com/kem0x/Memcury
-CSM (Curl Server Manipulation) for the base cURL hook - https://github.com/ALEHACKsp/Curl-Server-Manipulation
-Neonite++ for the signatures - https://github.com/PeQuLeaks/NeonitePP-Fixed/tree/1.4
+Neonite++ for the signatures and curl hook - https://github.com/PeQuLeaks/NeonitePP-Fixed/tree/1.4
diff --git a/vendor/cURL/curl.h b/vendor/cURL/curl.h
new file mode 100644
index 0000000..3e51358
--- /dev/null
+++ b/vendor/cURL/curl.h
@@ -0,0 +1,2791 @@
+#ifndef __CURL_CURL_H
+#define __CURL_CURL_H
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2017, Daniel Stenberg, , et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+/*
+ * If you have libcurl problems, all docs and details are found here:
+ * https://curl.haxx.se/libcurl/
+ *
+ * curl-library mailing list subscription and unsubscription web interface:
+ * https://cool.haxx.se/mailman/listinfo/curl-library/
+ */
+
+#ifdef CURL_NO_OLDIES
+#define CURL_STRICTER
+#endif
+
+#include "curlver.h" /* libcurl version defines */
+#include "system.h" /* determine things run-time */
+
+/*
+ * Define WIN32 when build target is Win32 API
+ */
+
+#if (defined(_WIN32) || defined(__WIN32__)) && \
+ !defined(WIN32) && !defined(__SYMBIAN32__)
+#define WIN32
+#endif
+
+#include
+#include
+
+#if defined(__FreeBSD__) && (__FreeBSD__ >= 2)
+/* Needed for __FreeBSD_version symbol definition */
+#include
+#endif
+
+/* The include stuff here below is mainly for time_t! */
+#include
+#include
+
+#if defined(WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__)
+#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \
+ defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H))
+/* The check above prevents the winsock2 inclusion if winsock.h already was
+ included, since they can't co-exist without problems */
+#include
+#include
+#endif
+#endif
+
+/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish
+ libc5-based Linux systems. Only include it on systems that are known to
+ require it! */
+#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
+ defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \
+ defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \
+ (defined(__FreeBSD_version) && (__FreeBSD_version < 800000))
+#include
+#endif
+
+#if !defined(WIN32) && !defined(_WIN32_WCE)
+#include
+#endif
+
+#if !defined(WIN32) && !defined(__WATCOMC__) && !defined(__VXWORKS__)
+#include
+#endif
+
+#ifdef __BEOS__
+#include
+#endif
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER)
+typedef struct Curl_easy CURL;
+typedef struct Curl_share CURLSH;
+#else
+typedef void CURL;
+typedef void CURLSH;
+#endif
+
+/*
+ * libcurl external API function linkage decorations.
+ */
+
+#ifdef CURL_STATICLIB
+# define CURL_EXTERN
+#elif defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__)
+# if defined(BUILDING_LIBCURL)
+# define CURL_EXTERN __declspec(dllexport)
+# else
+# define CURL_EXTERN __declspec(dllimport)
+# endif
+#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS)
+# define CURL_EXTERN CURL_EXTERN_SYMBOL
+#else
+# define CURL_EXTERN
+#endif
+
+#ifndef curl_socket_typedef
+/* socket typedef */
+#if defined(WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H)
+typedef SOCKET curl_socket_t;
+#define CURL_SOCKET_BAD INVALID_SOCKET
+#else
+typedef int curl_socket_t;
+#define CURL_SOCKET_BAD -1
+#endif
+#define curl_socket_typedef
+#endif /* curl_socket_typedef */
+
+struct curl_httppost
+{
+ struct curl_httppost* next; /* next entry in the list */
+ char* name; /* pointer to allocated name */
+ long namelength; /* length of name length */
+ char* contents; /* pointer to allocated data contents */
+ long contentslength; /* length of contents field, see also
+ CURL_HTTPPOST_LARGE */
+ char* buffer; /* pointer to allocated buffer contents */
+ long bufferlength; /* length of buffer field */
+ char* contenttype; /* Content-Type */
+ struct curl_slist* contentheader; /* list of extra headers for this form */
+ struct curl_httppost* more; /* if one field name has more than one
+ file, this link should link to following
+ files */
+ long flags; /* as defined below */
+
+ /* specified content is a file name */
+#define CURL_HTTPPOST_FILENAME (1<<0)
+ /* specified content is a file name */
+#define CURL_HTTPPOST_READFILE (1<<1)
+ /* name is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRNAME (1<<2)
+ /* contents is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRCONTENTS (1<<3)
+ /* upload file from buffer */
+#define CURL_HTTPPOST_BUFFER (1<<4)
+ /* upload file from pointer contents */
+#define CURL_HTTPPOST_PTRBUFFER (1<<5)
+ /* upload file contents by using the regular read callback to get the data and
+ pass the given pointer as custom pointer */
+#define CURL_HTTPPOST_CALLBACK (1<<6)
+ /* use size in 'contentlen', added in 7.46.0 */
+#define CURL_HTTPPOST_LARGE (1<<7)
+
+ char* showfilename; /* The file name to show. If not set, the
+ actual file name will be used (if this
+ is a file part) */
+ void* userp; /* custom pointer used for
+ HTTPPOST_CALLBACK posts */
+ curl_off_t contentlen; /* alternative length of contents
+ field. Used if CURL_HTTPPOST_LARGE is
+ set. Added in 7.46.0 */
+};
+
+/* This is the CURLOPT_PROGRESSFUNCTION callback proto. It is now considered
+ deprecated but was the only choice up until 7.31.0 */
+typedef int (*curl_progress_callback)(void* clientp,
+ double dltotal,
+ double dlnow,
+ double ultotal,
+ double ulnow);
+
+/* This is the CURLOPT_XFERINFOFUNCTION callback proto. It was introduced in
+ 7.32.0, it avoids floating point and provides more detailed information. */
+typedef int (*curl_xferinfo_callback)(void* clientp,
+ curl_off_t dltotal,
+ curl_off_t dlnow,
+ curl_off_t ultotal,
+ curl_off_t ulnow);
+
+#ifndef CURL_MAX_READ_SIZE
+/* The maximum receive buffer size configurable via CURLOPT_BUFFERSIZE. */
+#define CURL_MAX_READ_SIZE 524288
+#endif
+
+#ifndef CURL_MAX_WRITE_SIZE
+/* Tests have proven that 20K is a very bad buffer size for uploads on
+ Windows, while 16K for some odd reason performed a lot better.
+ We do the ifndef check to allow this value to easier be changed at build
+ time for those who feel adventurous. The practical minimum is about
+ 400 bytes since libcurl uses a buffer of this size as a scratch area
+ (unrelated to network send operations). */
+#define CURL_MAX_WRITE_SIZE 16384
+#endif
+
+#ifndef CURL_MAX_HTTP_HEADER
+/* The only reason to have a max limit for this is to avoid the risk of a bad
+ server feeding libcurl with a never-ending header that will cause reallocs
+ infinitely */
+#define CURL_MAX_HTTP_HEADER (100*1024)
+#endif
+
+/* This is a magic return code for the write callback that, when returned,
+ will signal libcurl to pause receiving on the current transfer. */
+#define CURL_WRITEFUNC_PAUSE 0x10000001
+
+typedef size_t (*curl_write_callback)(char* buffer,
+ size_t size,
+ size_t nitems,
+ void* outstream);
+
+
+/* enumeration of file types */
+typedef enum
+{
+ CURLFILETYPE_FILE = 0,
+ CURLFILETYPE_DIRECTORY,
+ CURLFILETYPE_SYMLINK,
+ CURLFILETYPE_DEVICE_BLOCK,
+ CURLFILETYPE_DEVICE_CHAR,
+ CURLFILETYPE_NAMEDPIPE,
+ CURLFILETYPE_SOCKET,
+ CURLFILETYPE_DOOR,
+ /* is possible only on Sun Solaris now */
+
+ CURLFILETYPE_UNKNOWN /* should never occur */
+} curlfiletype;
+
+#define CURLFINFOFLAG_KNOWN_FILENAME (1<<0)
+#define CURLFINFOFLAG_KNOWN_FILETYPE (1<<1)
+#define CURLFINFOFLAG_KNOWN_TIME (1<<2)
+#define CURLFINFOFLAG_KNOWN_PERM (1<<3)
+#define CURLFINFOFLAG_KNOWN_UID (1<<4)
+#define CURLFINFOFLAG_KNOWN_GID (1<<5)
+#define CURLFINFOFLAG_KNOWN_SIZE (1<<6)
+#define CURLFINFOFLAG_KNOWN_HLINKCOUNT (1<<7)
+
+/* Content of this structure depends on information which is known and is
+ achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man
+ page for callbacks returning this structure -- some fields are mandatory,
+ some others are optional. The FLAG field has special meaning. */
+struct curl_fileinfo
+{
+ char* filename;
+ curlfiletype filetype;
+ time_t time;
+ unsigned int perm;
+ int uid;
+ int gid;
+ curl_off_t size;
+ long int hardlinks;
+
+ struct
+ {
+ /* If some of these fields is not NULL, it is a pointer to b_data. */
+ char* time;
+ char* perm;
+ char* user;
+ char* group;
+ char* target; /* pointer to the target filename of a symlink */
+ } strings;
+
+ unsigned int flags;
+
+ /* used internally */
+ char* b_data;
+ size_t b_size;
+ size_t b_used;
+};
+
+/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */
+#define CURL_CHUNK_BGN_FUNC_OK 0
+#define CURL_CHUNK_BGN_FUNC_FAIL 1 /* tell the lib to end the task */
+#define CURL_CHUNK_BGN_FUNC_SKIP 2 /* skip this chunk over */
+
+/* if splitting of data transfer is enabled, this callback is called before
+ download of an individual chunk started. Note that parameter "remains" works
+ only for FTP wildcard downloading (for now), otherwise is not used */
+typedef long (*curl_chunk_bgn_callback)(const void* transfer_info,
+ void* ptr,
+ int remains);
+
+/* return codes for CURLOPT_CHUNK_END_FUNCTION */
+#define CURL_CHUNK_END_FUNC_OK 0
+#define CURL_CHUNK_END_FUNC_FAIL 1 /* tell the lib to end the task */
+
+/* If splitting of data transfer is enabled this callback is called after
+ download of an individual chunk finished.
+ Note! After this callback was set then it have to be called FOR ALL chunks.
+ Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC.
+ This is the reason why we don't need "transfer_info" parameter in this
+ callback and we are not interested in "remains" parameter too. */
+typedef long (*curl_chunk_end_callback)(void* ptr);
+
+/* return codes for FNMATCHFUNCTION */
+#define CURL_FNMATCHFUNC_MATCH 0 /* string corresponds to the pattern */
+#define CURL_FNMATCHFUNC_NOMATCH 1 /* pattern doesn't match the string */
+#define CURL_FNMATCHFUNC_FAIL 2 /* an error occurred */
+
+/* callback type for wildcard downloading pattern matching. If the
+ string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */
+typedef int (*curl_fnmatch_callback)(void* ptr,
+ const char* pattern,
+ const char* string);
+
+/* These are the return codes for the seek callbacks */
+#define CURL_SEEKFUNC_OK 0
+#define CURL_SEEKFUNC_FAIL 1 /* fail the entire transfer */
+#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so
+ libcurl might try other means instead */
+typedef int (*curl_seek_callback)(void* instream,
+ curl_off_t offset,
+ int origin); /* 'whence' */
+
+/* This is a return code for the read callback that, when returned, will
+ signal libcurl to immediately abort the current transfer. */
+#define CURL_READFUNC_ABORT 0x10000000
+/* This is a return code for the read callback that, when returned, will
+ signal libcurl to pause sending data on the current transfer. */
+#define CURL_READFUNC_PAUSE 0x10000001
+
+typedef size_t (*curl_read_callback)(char* buffer,
+ size_t size,
+ size_t nitems,
+ void* instream);
+
+typedef enum
+{
+ CURLSOCKTYPE_IPCXN,
+ /* socket created for a specific IP connection */
+ CURLSOCKTYPE_ACCEPT,
+ /* socket created by accept() call */
+ CURLSOCKTYPE_LAST /* never use */
+} curlsocktype;
+
+/* The return code from the sockopt_callback can signal information back
+ to libcurl: */
+#define CURL_SOCKOPT_OK 0
+#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return
+ CURLE_ABORTED_BY_CALLBACK */
+#define CURL_SOCKOPT_ALREADY_CONNECTED 2
+
+typedef int (*curl_sockopt_callback)(void* clientp,
+ curl_socket_t curlfd,
+ curlsocktype purpose);
+
+struct curl_sockaddr
+{
+ int family;
+ int socktype;
+ int protocol;
+ unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it
+ turned really ugly and painful on the systems that
+ lack this type */
+ struct sockaddr addr;
+};
+
+typedef curl_socket_t
+(*curl_opensocket_callback)(void* clientp,
+ curlsocktype purpose,
+ struct curl_sockaddr* address);
+
+typedef int
+(*curl_closesocket_callback)(void* clientp, curl_socket_t item);
+
+typedef enum
+{
+ CURLIOE_OK,
+ /* I/O operation successful */
+ CURLIOE_UNKNOWNCMD,
+ /* command was unknown to callback */
+ CURLIOE_FAILRESTART,
+ /* failed to restart the read */
+ CURLIOE_LAST /* never use */
+} curlioerr;
+
+typedef enum
+{
+ CURLIOCMD_NOP,
+ /* no operation */
+ CURLIOCMD_RESTARTREAD,
+ /* restart the read stream from start */
+ CURLIOCMD_LAST /* never use */
+} curliocmd;
+
+typedef curlioerr (*curl_ioctl_callback)(CURL* handle,
+ int cmd,
+ void* clientp);
+
+#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS
+/*
+ * The following typedef's are signatures of malloc, free, realloc, strdup and
+ * calloc respectively. Function pointers of these types can be passed to the
+ * curl_global_init_mem() function to set user defined memory management
+ * callback routines.
+ */
+typedef void*(*curl_malloc_callback)(size_t size);
+typedef void (*curl_free_callback)(void* ptr);
+typedef void*(*curl_realloc_callback)(void* ptr, size_t size);
+typedef char*(*curl_strdup_callback)(const char* str);
+typedef void*(*curl_calloc_callback)(size_t nmemb, size_t size);
+
+#define CURL_DID_MEMORY_FUNC_TYPEDEFS
+#endif
+
+/* the kind of data that is passed to information_callback*/
+typedef enum
+{
+ CURLINFO_TEXT = 0,
+ CURLINFO_HEADER_IN,
+ /* 1 */
+ CURLINFO_HEADER_OUT,
+ /* 2 */
+ CURLINFO_DATA_IN,
+ /* 3 */
+ CURLINFO_DATA_OUT,
+ /* 4 */
+ CURLINFO_SSL_DATA_IN,
+ /* 5 */
+ CURLINFO_SSL_DATA_OUT,
+ /* 6 */
+ CURLINFO_END
+} curl_infotype;
+
+typedef int (*curl_debug_callback)
+(CURL* handle, /* the handle/transfer this concerns */
+ curl_infotype type, /* what kind of data */
+ char* data, /* points to the data */
+ size_t size, /* size of the data pointed to */
+ void* userptr); /* whatever the user please */
+
+/* All possible error codes from all sorts of curl functions. Future versions
+ may return other values, stay prepared.
+
+ Always add new return codes last. Never *EVER* remove any. The return
+ codes must remain the same!
+ */
+
+typedef enum
+{
+ CURLE_OK = 0,
+ CURLE_UNSUPPORTED_PROTOCOL,
+ /* 1 */
+ CURLE_FAILED_INIT,
+ /* 2 */
+ CURLE_URL_MALFORMAT,
+ /* 3 */
+ CURLE_NOT_BUILT_IN,
+ /* 4 - [was obsoleted in August 2007 for
+ 7.17.0, reused in April 2011 for 7.21.5] */
+ CURLE_COULDNT_RESOLVE_PROXY,
+ /* 5 */
+ CURLE_COULDNT_RESOLVE_HOST,
+ /* 6 */
+ CURLE_COULDNT_CONNECT,
+ /* 7 */
+ CURLE_WEIRD_SERVER_REPLY,
+ /* 8 */
+ CURLE_REMOTE_ACCESS_DENIED,
+ /* 9 a service was denied by the server
+ due to lack of access - when login fails
+ this is not returned. */
+ CURLE_FTP_ACCEPT_FAILED,
+ /* 10 - [was obsoleted in April 2006 for
+ 7.15.4, reused in Dec 2011 for 7.24.0]*/
+ CURLE_FTP_WEIRD_PASS_REPLY,
+ /* 11 */
+ CURLE_FTP_ACCEPT_TIMEOUT,
+ /* 12 - timeout occurred accepting server
+ [was obsoleted in August 2007 for 7.17.0,
+ reused in Dec 2011 for 7.24.0]*/
+ CURLE_FTP_WEIRD_PASV_REPLY,
+ /* 13 */
+ CURLE_FTP_WEIRD_227_FORMAT,
+ /* 14 */
+ CURLE_FTP_CANT_GET_HOST,
+ /* 15 */
+ CURLE_HTTP2,
+ /* 16 - A problem in the http2 framing layer.
+ [was obsoleted in August 2007 for 7.17.0,
+ reused in July 2014 for 7.38.0] */
+ CURLE_FTP_COULDNT_SET_TYPE,
+ /* 17 */
+ CURLE_PARTIAL_FILE,
+ /* 18 */
+ CURLE_FTP_COULDNT_RETR_FILE,
+ /* 19 */
+ CURLE_OBSOLETE20,
+ /* 20 - NOT USED */
+ CURLE_QUOTE_ERROR,
+ /* 21 - quote command failure */
+ CURLE_HTTP_RETURNED_ERROR,
+ /* 22 */
+ CURLE_WRITE_ERROR,
+ /* 23 */
+ CURLE_OBSOLETE24,
+ /* 24 - NOT USED */
+ CURLE_UPLOAD_FAILED,
+ /* 25 - failed upload "command" */
+ CURLE_READ_ERROR,
+ /* 26 - couldn't open/read from file */
+ CURLE_OUT_OF_MEMORY,
+ /* 27 */
+ /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error
+ instead of a memory allocation error if CURL_DOES_CONVERSIONS
+ is defined
+ */
+ CURLE_OPERATION_TIMEDOUT,
+ /* 28 - the timeout time was reached */
+ CURLE_OBSOLETE29,
+ /* 29 - NOT USED */
+ CURLE_FTP_PORT_FAILED,
+ /* 30 - FTP PORT operation failed */
+ CURLE_FTP_COULDNT_USE_REST,
+ /* 31 - the REST command failed */
+ CURLE_OBSOLETE32,
+ /* 32 - NOT USED */
+ CURLE_RANGE_ERROR,
+ /* 33 - RANGE "command" didn't work */
+ CURLE_HTTP_POST_ERROR,
+ /* 34 */
+ CURLE_SSL_CONNECT_ERROR,
+ /* 35 - wrong when connecting with SSL */
+ CURLE_BAD_DOWNLOAD_RESUME,
+ /* 36 - couldn't resume download */
+ CURLE_FILE_COULDNT_READ_FILE,
+ /* 37 */
+ CURLE_LDAP_CANNOT_BIND,
+ /* 38 */
+ CURLE_LDAP_SEARCH_FAILED,
+ /* 39 */
+ CURLE_OBSOLETE40,
+ /* 40 - NOT USED */
+ CURLE_FUNCTION_NOT_FOUND,
+ /* 41 - NOT USED starting with 7.53.0 */
+ CURLE_ABORTED_BY_CALLBACK,
+ /* 42 */
+ CURLE_BAD_FUNCTION_ARGUMENT,
+ /* 43 */
+ CURLE_OBSOLETE44,
+ /* 44 - NOT USED */
+ CURLE_INTERFACE_FAILED,
+ /* 45 - CURLOPT_INTERFACE failed */
+ CURLE_OBSOLETE46,
+ /* 46 - NOT USED */
+ CURLE_TOO_MANY_REDIRECTS,
+ /* 47 - catch endless re-direct loops */
+ CURLE_UNKNOWN_OPTION,
+ /* 48 - User specified an unknown option */
+ CURLE_TELNET_OPTION_SYNTAX,
+ /* 49 - Malformed telnet option */
+ CURLE_OBSOLETE50,
+ /* 50 - NOT USED */
+ CURLE_PEER_FAILED_VERIFICATION,
+ /* 51 - peer's certificate or fingerprint
+ wasn't verified fine */
+ CURLE_GOT_NOTHING,
+ /* 52 - when this is a specific error */
+ CURLE_SSL_ENGINE_NOTFOUND,
+ /* 53 - SSL crypto engine not found */
+ CURLE_SSL_ENGINE_SETFAILED,
+ /* 54 - can not set SSL crypto engine as
+ default */
+ CURLE_SEND_ERROR,
+ /* 55 - failed sending network data */
+ CURLE_RECV_ERROR,
+ /* 56 - failure in receiving network data */
+ CURLE_OBSOLETE57,
+ /* 57 - NOT IN USE */
+ CURLE_SSL_CERTPROBLEM,
+ /* 58 - problem with the local certificate */
+ CURLE_SSL_CIPHER,
+ /* 59 - couldn't use specified cipher */
+ CURLE_SSL_CACERT,
+ /* 60 - problem with the CA cert (path?) */
+ CURLE_BAD_CONTENT_ENCODING,
+ /* 61 - Unrecognized/bad encoding */
+ CURLE_LDAP_INVALID_URL,
+ /* 62 - Invalid LDAP URL */
+ CURLE_FILESIZE_EXCEEDED,
+ /* 63 - Maximum file size exceeded */
+ CURLE_USE_SSL_FAILED,
+ /* 64 - Requested FTP SSL level failed */
+ CURLE_SEND_FAIL_REWIND,
+ /* 65 - Sending the data requires a rewind
+ that failed */
+ CURLE_SSL_ENGINE_INITFAILED,
+ /* 66 - failed to initialise ENGINE */
+ CURLE_LOGIN_DENIED,
+ /* 67 - user, password or similar was not
+ accepted and we failed to login */
+ CURLE_TFTP_NOTFOUND,
+ /* 68 - file not found on server */
+ CURLE_TFTP_PERM,
+ /* 69 - permission problem on server */
+ CURLE_REMOTE_DISK_FULL,
+ /* 70 - out of disk space on server */
+ CURLE_TFTP_ILLEGAL,
+ /* 71 - Illegal TFTP operation */
+ CURLE_TFTP_UNKNOWNID,
+ /* 72 - Unknown transfer ID */
+ CURLE_REMOTE_FILE_EXISTS,
+ /* 73 - File already exists */
+ CURLE_TFTP_NOSUCHUSER,
+ /* 74 - No such user */
+ CURLE_CONV_FAILED,
+ /* 75 - conversion failed */
+ CURLE_CONV_REQD,
+ /* 76 - caller must register conversion
+ callbacks using curl_easy_setopt options
+ CURLOPT_CONV_FROM_NETWORK_FUNCTION,
+ CURLOPT_CONV_TO_NETWORK_FUNCTION, and
+ CURLOPT_CONV_FROM_UTF8_FUNCTION */
+ CURLE_SSL_CACERT_BADFILE,
+ /* 77 - could not load CACERT file, missing
+ or wrong format */
+ CURLE_REMOTE_FILE_NOT_FOUND,
+ /* 78 - remote file not found */
+ CURLE_SSH,
+ /* 79 - error from the SSH layer, somewhat
+ generic so the error message will be of
+ interest when this has happened */
+
+ CURLE_SSL_SHUTDOWN_FAILED,
+ /* 80 - Failed to shut down the SSL
+ connection */
+ CURLE_AGAIN,
+ /* 81 - socket is not ready for send/recv,
+ wait till it's ready and try again (Added
+ in 7.18.2) */
+ CURLE_SSL_CRL_BADFILE,
+ /* 82 - could not load CRL file, missing or
+ wrong format (Added in 7.19.0) */
+ CURLE_SSL_ISSUER_ERROR,
+ /* 83 - Issuer check failed. (Added in
+ 7.19.0) */
+ CURLE_FTP_PRET_FAILED,
+ /* 84 - a PRET command failed */
+ CURLE_RTSP_CSEQ_ERROR,
+ /* 85 - mismatch of RTSP CSeq numbers */
+ CURLE_RTSP_SESSION_ERROR,
+ /* 86 - mismatch of RTSP Session Ids */
+ CURLE_FTP_BAD_FILE_LIST,
+ /* 87 - unable to parse FTP file list */
+ CURLE_CHUNK_FAILED,
+ /* 88 - chunk callback reported error */
+ CURLE_NO_CONNECTION_AVAILABLE,
+ /* 89 - No connection available, the
+ session will be queued */
+ CURLE_SSL_PINNEDPUBKEYNOTMATCH,
+ /* 90 - specified pinned public key did not
+ match */
+ CURLE_SSL_INVALIDCERTSTATUS,
+ /* 91 - invalid certificate status */
+ CURLE_HTTP2_STREAM,
+ /* 92 - stream error in HTTP/2 framing layer
+ */
+ CURL_LAST /* never use! */
+} CURLcode;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+ the obsolete stuff removed! */
+
+/* Previously obsolete error code re-used in 7.38.0 */
+#define CURLE_OBSOLETE16 CURLE_HTTP2
+
+/* Previously obsolete error codes re-used in 7.24.0 */
+#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED
+#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT
+
+/* compatibility with older names */
+#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING
+#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY
+
+/* The following were added in 7.21.5, April 2011 */
+#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION
+
+/* The following were added in 7.17.1 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION
+
+/* The following were added in 7.17.0 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */
+#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46
+#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44
+#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10
+#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16
+#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32
+#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29
+#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12
+#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20
+#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40
+#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24
+#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57
+#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN
+
+#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED
+#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE
+#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR
+#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL
+#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS
+#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR
+#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED
+
+/* The following were added earlier */
+
+#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT
+
+#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
+#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
+#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED
+
+#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
+
+/* This was the error code 50 in 7.7.3 and a few earlier versions, this
+ is no longer used by libcurl but is instead #defined here only to not
+ make programs break */
+#define CURLE_ALREADY_COMPLETE 99999
+
+/* Provide defines for really old option names */
+#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */
+#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */
+#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA
+
+/* Since long deprecated options with no code in the lib that does anything
+ with them. */
+#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40
+#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72
+
+#endif /*!CURL_NO_OLDIES*/
+
+/* This prototype applies to all conversion callbacks */
+typedef CURLcode (*curl_conv_callback)(char* buffer, size_t length);
+
+typedef CURLcode (*curl_ssl_ctx_callback)(CURL* curl, /* easy handle */
+ void* ssl_ctx, /* actually an
+ OpenSSL SSL_CTX */
+ void* userptr);
+
+typedef enum
+{
+ CURLPROXY_HTTP = 0,
+ /* added in 7.10, new in 7.19.4 default is to use
+ CONNECT HTTP/1.1 */
+ CURLPROXY_HTTP_1_0 = 1,
+ /* added in 7.19.4, force to use CONNECT
+ HTTP/1.0 */
+ CURLPROXY_HTTPS = 2,
+ /* added in 7.52.0 */
+ CURLPROXY_SOCKS4 = 4,
+ /* support added in 7.15.2, enum existed already
+ in 7.10 */
+ CURLPROXY_SOCKS5 = 5,
+ /* added in 7.10 */
+ CURLPROXY_SOCKS4A = 6,
+ /* added in 7.18.0 */
+ CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the
+ host name rather than the IP address. added
+ in 7.18.0 */
+} curl_proxytype; /* this enum was added in 7.10 */
+
+/*
+ * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options:
+ *
+ * CURLAUTH_NONE - No HTTP authentication
+ * CURLAUTH_BASIC - HTTP Basic authentication (default)
+ * CURLAUTH_DIGEST - HTTP Digest authentication
+ * CURLAUTH_NEGOTIATE - HTTP Negotiate (SPNEGO) authentication
+ * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated)
+ * CURLAUTH_NTLM - HTTP NTLM authentication
+ * CURLAUTH_DIGEST_IE - HTTP Digest authentication with IE flavour
+ * CURLAUTH_NTLM_WB - HTTP NTLM authentication delegated to winbind helper
+ * CURLAUTH_ONLY - Use together with a single other type to force no
+ * authentication or just that single type
+ * CURLAUTH_ANY - All fine types set
+ * CURLAUTH_ANYSAFE - All fine types except Basic
+ */
+
+#define CURLAUTH_NONE ((unsigned long)0)
+#define CURLAUTH_BASIC (((unsigned long)1)<<0)
+#define CURLAUTH_DIGEST (((unsigned long)1)<<1)
+#define CURLAUTH_NEGOTIATE (((unsigned long)1)<<2)
+/* Deprecated since the advent of CURLAUTH_NEGOTIATE */
+#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE
+/* Used for CURLOPT_SOCKS5_AUTH to stay terminologically correct */
+#define CURLAUTH_GSSAPI CURLAUTH_NEGOTIATE
+#define CURLAUTH_NTLM (((unsigned long)1)<<3)
+#define CURLAUTH_DIGEST_IE (((unsigned long)1)<<4)
+#define CURLAUTH_NTLM_WB (((unsigned long)1)<<5)
+#define CURLAUTH_ONLY (((unsigned long)1)<<31)
+#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE)
+#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
+
+#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */
+#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */
+#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */
+#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */
+#define CURLSSH_AUTH_HOST (1<<2) /* host key files */
+#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */
+#define CURLSSH_AUTH_AGENT (1<<4) /* agent (ssh-agent, pageant...) */
+#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY
+
+#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */
+#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */
+#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */
+
+#define CURL_ERROR_SIZE 256
+
+enum curl_khtype
+{
+ CURLKHTYPE_UNKNOWN,
+ CURLKHTYPE_RSA1,
+ CURLKHTYPE_RSA,
+ CURLKHTYPE_DSS
+};
+
+struct curl_khkey
+{
+ const char* key; /* points to a zero-terminated string encoded with base64
+ if len is zero, otherwise to the "raw" data */
+ size_t len;
+ enum curl_khtype keytype;
+};
+
+/* this is the set of return values expected from the curl_sshkeycallback
+ callback */
+enum curl_khstat
+{
+ CURLKHSTAT_FINE_ADD_TO_FILE,
+ CURLKHSTAT_FINE,
+ CURLKHSTAT_REJECT,
+ /* reject the connection, return an error */
+ CURLKHSTAT_DEFER,
+ /* do not accept it, but we can't answer right now so
+ this causes a CURLE_DEFER error but otherwise the
+ connection will be left intact etc */
+ CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */
+};
+
+/* this is the set of status codes pass in to the callback */
+enum curl_khmatch
+{
+ CURLKHMATCH_OK,
+ /* match */
+ CURLKHMATCH_MISMATCH,
+ /* host found, key mismatch! */
+ CURLKHMATCH_MISSING,
+ /* no matching host/key found */
+ CURLKHMATCH_LAST /* not for use, only a marker for last-in-list */
+};
+
+typedef int
+(*curl_sshkeycallback)(CURL* easy, /* easy handle */
+ const struct curl_khkey* knownkey, /* known */
+ const struct curl_khkey* foundkey, /* found */
+ enum curl_khmatch, /* libcurl's view on the keys */
+ void* clientp); /* custom pointer passed from app */
+
+/* parameter for the CURLOPT_USE_SSL option */
+typedef enum
+{
+ CURLUSESSL_NONE,
+ /* do not attempt to use SSL */
+ CURLUSESSL_TRY,
+ /* try using SSL, proceed anyway otherwise */
+ CURLUSESSL_CONTROL,
+ /* SSL for the control connection or fail */
+ CURLUSESSL_ALL,
+ /* SSL for all communication or fail */
+ CURLUSESSL_LAST /* not an option, never use */
+} curl_usessl;
+
+/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */
+
+/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the
+ name of improving interoperability with older servers. Some SSL libraries
+ have introduced work-arounds for this flaw but those work-arounds sometimes
+ make the SSL communication fail. To regain functionality with those broken
+ servers, a user can this way allow the vulnerability back. */
+#define CURLSSLOPT_ALLOW_BEAST (1<<0)
+
+/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those
+ SSL backends where such behavior is present. */
+#define CURLSSLOPT_NO_REVOKE (1<<1)
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+ the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2009 */
+
+#define CURLFTPSSL_NONE CURLUSESSL_NONE
+#define CURLFTPSSL_TRY CURLUSESSL_TRY
+#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL
+#define CURLFTPSSL_ALL CURLUSESSL_ALL
+#define CURLFTPSSL_LAST CURLUSESSL_LAST
+#define curl_ftpssl curl_usessl
+#endif /*!CURL_NO_OLDIES*/
+
+/* parameter for the CURLOPT_FTP_SSL_CCC option */
+typedef enum
+{
+ CURLFTPSSL_CCC_NONE,
+ /* do not send CCC */
+ CURLFTPSSL_CCC_PASSIVE,
+ /* Let the server initiate the shutdown */
+ CURLFTPSSL_CCC_ACTIVE,
+ /* Initiate the shutdown */
+ CURLFTPSSL_CCC_LAST /* not an option, never use */
+} curl_ftpccc;
+
+/* parameter for the CURLOPT_FTPSSLAUTH option */
+typedef enum
+{
+ CURLFTPAUTH_DEFAULT,
+ /* let libcurl decide */
+ CURLFTPAUTH_SSL,
+ /* use "AUTH SSL" */
+ CURLFTPAUTH_TLS,
+ /* use "AUTH TLS" */
+ CURLFTPAUTH_LAST /* not an option, never use */
+} curl_ftpauth;
+
+/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */
+typedef enum
+{
+ CURLFTP_CREATE_DIR_NONE,
+ /* do NOT create missing dirs! */
+ CURLFTP_CREATE_DIR,
+ /* (FTP/SFTP) if CWD fails, try MKD and then CWD
+ again if MKD succeeded, for SFTP this does
+ similar magic */
+ CURLFTP_CREATE_DIR_RETRY,
+ /* (FTP only) if CWD fails, try MKD and then CWD
+ again even if MKD failed! */
+ CURLFTP_CREATE_DIR_LAST /* not an option, never use */
+} curl_ftpcreatedir;
+
+/* parameter for the CURLOPT_FTP_FILEMETHOD option */
+typedef enum
+{
+ CURLFTPMETHOD_DEFAULT,
+ /* let libcurl pick */
+ CURLFTPMETHOD_MULTICWD,
+ /* single CWD operation for each path part */
+ CURLFTPMETHOD_NOCWD,
+ /* no CWD at all */
+ CURLFTPMETHOD_SINGLECWD,
+ /* one CWD to full dir, then work on file */
+ CURLFTPMETHOD_LAST /* not an option, never use */
+} curl_ftpmethod;
+
+/* bitmask defines for CURLOPT_HEADEROPT */
+#define CURLHEADER_UNIFIED 0
+#define CURLHEADER_SEPARATE (1<<0)
+
+/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */
+#define CURLPROTO_HTTP (1<<0)
+#define CURLPROTO_HTTPS (1<<1)
+#define CURLPROTO_FTP (1<<2)
+#define CURLPROTO_FTPS (1<<3)
+#define CURLPROTO_SCP (1<<4)
+#define CURLPROTO_SFTP (1<<5)
+#define CURLPROTO_TELNET (1<<6)
+#define CURLPROTO_LDAP (1<<7)
+#define CURLPROTO_LDAPS (1<<8)
+#define CURLPROTO_DICT (1<<9)
+#define CURLPROTO_FILE (1<<10)
+#define CURLPROTO_TFTP (1<<11)
+#define CURLPROTO_IMAP (1<<12)
+#define CURLPROTO_IMAPS (1<<13)
+#define CURLPROTO_POP3 (1<<14)
+#define CURLPROTO_POP3S (1<<15)
+#define CURLPROTO_SMTP (1<<16)
+#define CURLPROTO_SMTPS (1<<17)
+#define CURLPROTO_RTSP (1<<18)
+#define CURLPROTO_RTMP (1<<19)
+#define CURLPROTO_RTMPT (1<<20)
+#define CURLPROTO_RTMPE (1<<21)
+#define CURLPROTO_RTMPTE (1<<22)
+#define CURLPROTO_RTMPS (1<<23)
+#define CURLPROTO_RTMPTS (1<<24)
+#define CURLPROTO_GOPHER (1<<25)
+#define CURLPROTO_SMB (1<<26)
+#define CURLPROTO_SMBS (1<<27)
+#define CURLPROTO_ALL (~0) /* enable everything */
+
+/* long may be 32 or 64 bits, but we should never depend on anything else
+ but 32 */
+#define CURLOPTTYPE_LONG 0
+#define CURLOPTTYPE_OBJECTPOINT 10000
+#define CURLOPTTYPE_STRINGPOINT 10000
+#define CURLOPTTYPE_FUNCTIONPOINT 20000
+#define CURLOPTTYPE_OFF_T 30000
+
+/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the
+ string options from the header file */
+
+/* name is uppercase CURLOPT_,
+ type is one of the defined CURLOPTTYPE_
+ number is unique identifier */
+#ifdef CINIT
+#undef CINIT
+#endif
+
+#ifdef CURL_ISOCPP
+#define CINIT(na,t,nu) CURLOPT_ ## na = CURLOPTTYPE_ ## t + nu
+#else
+/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
+#define LONG CURLOPTTYPE_LONG
+#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT
+#define STRINGPOINT CURLOPTTYPE_OBJECTPOINT
+#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
+#define OFF_T CURLOPTTYPE_OFF_T
+#define CINIT(name,type,number) CURLOPT_/**/name = type + number
+#endif
+
+/*
+ * This macro-mania below setups the CURLOPT_[what] enum, to be used with
+ * curl_easy_setopt(). The first argument in the CINIT() macro is the [what]
+ * word.
+ */
+
+typedef enum
+{
+ /* This is the FILE * or void * the regular output should be written to. */
+ CINIT(WRITEDATA, OBJECTPOINT, 1),
+
+ /* The full URL to get/put */
+ CINIT(URL, STRINGPOINT, 2),
+
+ /* Port number to connect to, if other than default. */
+ CINIT(PORT, LONG, 3),
+
+ /* Name of proxy to use. */
+ CINIT(PROXY, STRINGPOINT, 4),
+
+ /* "user:password;options" to use when fetching. */
+ CINIT(USERPWD, STRINGPOINT, 5),
+
+ /* "user:password" to use with proxy. */
+ CINIT(PROXYUSERPWD, STRINGPOINT, 6),
+
+ /* Range to get, specified as an ASCII string. */
+ CINIT(RANGE, STRINGPOINT, 7),
+
+ /* not used */
+
+ /* Specified file stream to upload from (use as input): */
+ CINIT(READDATA, OBJECTPOINT, 9),
+
+ /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
+ * bytes big. If this is not used, error messages go to stderr instead: */
+ CINIT(ERRORBUFFER, OBJECTPOINT, 10),
+
+ /* Function that will be called to store the output (instead of fwrite). The
+ * parameters will use fwrite() syntax, make sure to follow them. */
+ CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11),
+
+ /* Function that will be called to read the input (instead of fread). The
+ * parameters will use fread() syntax, make sure to follow them. */
+ CINIT(READFUNCTION, FUNCTIONPOINT, 12),
+
+ /* Time-out the read operation after this amount of seconds */
+ CINIT(TIMEOUT, LONG, 13),
+
+ /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
+ * how large the file being sent really is. That allows better error
+ * checking and better verifies that the upload was successful. -1 means
+ * unknown size.
+ *
+ * For large file support, there is also a _LARGE version of the key
+ * which takes an off_t type, allowing platforms with larger off_t
+ * sizes to handle larger files. See below for INFILESIZE_LARGE.
+ */
+ CINIT(INFILESIZE, LONG, 14),
+
+ /* POST static input fields. */
+ CINIT(POSTFIELDS, OBJECTPOINT, 15),
+
+ /* Set the referrer page (needed by some CGIs) */
+ CINIT(REFERER, STRINGPOINT, 16),
+
+ /* Set the FTP PORT string (interface name, named or numerical IP address)
+ Use i.e '-' to use default address. */
+ CINIT(FTPPORT, STRINGPOINT, 17),
+
+ /* Set the User-Agent string (examined by some CGIs) */
+ CINIT(USERAGENT, STRINGPOINT, 18),
+
+ /* If the download receives less than "low speed limit" bytes/second
+ * during "low speed time" seconds, the operations is aborted.
+ * You could i.e if you have a pretty high speed connection, abort if
+ * it is less than 2000 bytes/sec during 20 seconds.
+ */
+
+ /* Set the "low speed limit" */
+ CINIT(LOW_SPEED_LIMIT, LONG, 19),
+
+ /* Set the "low speed time" */
+ CINIT(LOW_SPEED_TIME, LONG, 20),
+
+ /* Set the continuation offset.
+ *
+ * Note there is also a _LARGE version of this key which uses
+ * off_t types, allowing for large file offsets on platforms which
+ * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
+ */
+ CINIT(RESUME_FROM, LONG, 21),
+
+ /* Set cookie in request: */
+ CINIT(COOKIE, STRINGPOINT, 22),
+
+ /* This points to a linked list of headers, struct curl_slist kind. This
+ list is also used for RTSP (in spite of its name) */
+ CINIT(HTTPHEADER, OBJECTPOINT, 23),
+
+ /* This points to a linked list of post entries, struct curl_httppost */
+ CINIT(HTTPPOST, OBJECTPOINT, 24),
+
+ /* name of the file keeping your private SSL-certificate */
+ CINIT(SSLCERT, STRINGPOINT, 25),
+
+ /* password for the SSL or SSH private key */
+ CINIT(KEYPASSWD, STRINGPOINT, 26),
+
+ /* send TYPE parameter? */
+ CINIT(CRLF, LONG, 27),
+
+ /* send linked-list of QUOTE commands */
+ CINIT(QUOTE, OBJECTPOINT, 28),
+
+ /* send FILE * or void * to store headers to, if you use a callback it
+ is simply passed to the callback unmodified */
+ CINIT(HEADERDATA, OBJECTPOINT, 29),
+
+ /* point to a file to read the initial cookies from, also enables
+ "cookie awareness" */
+ CINIT(COOKIEFILE, STRINGPOINT, 31),
+
+ /* What version to specifically try to use.
+ See CURL_SSLVERSION defines below. */
+ CINIT(SSLVERSION, LONG, 32),
+
+ /* What kind of HTTP time condition to use, see defines */
+ CINIT(TIMECONDITION, LONG, 33),
+
+ /* Time to use with the above condition. Specified in number of seconds
+ since 1 Jan 1970 */
+ CINIT(TIMEVALUE, LONG, 34),
+
+ /* 35 = OBSOLETE */
+
+ /* Custom request, for customizing the get command like
+ HTTP: DELETE, TRACE and others
+ FTP: to use a different list command
+ */
+ CINIT(CUSTOMREQUEST, STRINGPOINT, 36),
+
+ /* FILE handle to use instead of stderr */
+ CINIT(STDERR, OBJECTPOINT, 37),
+
+ /* 38 is not used */
+
+ /* send linked-list of post-transfer QUOTE commands */
+ CINIT(POSTQUOTE, OBJECTPOINT, 39),
+
+ CINIT(OBSOLETE40, OBJECTPOINT, 40),
+ /* OBSOLETE, do not use! */
+
+ CINIT(VERBOSE, LONG, 41),
+ /* talk a lot */
+ CINIT(HEADER, LONG, 42),
+ /* throw the header out too */
+ CINIT(NOPROGRESS, LONG, 43),
+ /* shut off the progress meter */
+ CINIT(NOBODY, LONG, 44),
+ /* use HEAD to get http document */
+ CINIT(FAILONERROR, LONG, 45),
+ /* no output on http error codes >= 400 */
+ CINIT(UPLOAD, LONG, 46),
+ /* this is an upload */
+ CINIT(POST, LONG, 47),
+ /* HTTP POST method */
+ CINIT(DIRLISTONLY, LONG, 48),
+ /* bare names when listing directories */
+
+ CINIT(APPEND, LONG, 50),
+ /* Append instead of overwrite on upload! */
+
+ /* Specify whether to read the user+password from the .netrc or the URL.
+ * This must be one of the CURL_NETRC_* enums below. */
+ CINIT(NETRC, LONG, 51),
+
+ CINIT(FOLLOWLOCATION, LONG, 52),
+ /* use Location: Luke! */
+
+ CINIT(TRANSFERTEXT, LONG, 53),
+ /* transfer data in text/ASCII format */
+ CINIT(PUT, LONG, 54),
+ /* HTTP PUT */
+
+ /* 55 = OBSOLETE */
+
+ /* DEPRECATED
+ * Function that will be called instead of the internal progress display
+ * function. This function should be defined as the curl_progress_callback
+ * prototype defines. */
+ CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56),
+
+ /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION
+ callbacks */
+ CINIT(PROGRESSDATA, OBJECTPOINT, 57),
+#define CURLOPT_XFERINFODATA CURLOPT_PROGRESSDATA
+
+ /* We want the referrer field set automatically when following locations */
+ CINIT(AUTOREFERER, LONG, 58),
+
+ /* Port of the proxy, can be set in the proxy string as well with:
+ "[host]:[port]" */
+ CINIT(PROXYPORT, LONG, 59),
+
+ /* size of the POST input data, if strlen() is not good to use */
+ CINIT(POSTFIELDSIZE, LONG, 60),
+
+ /* tunnel non-http operations through a HTTP proxy */
+ CINIT(HTTPPROXYTUNNEL, LONG, 61),
+
+ /* Set the interface string to use as outgoing network interface */
+ CINIT(INTERFACE, STRINGPOINT, 62),
+
+ /* Set the krb4/5 security level, this also enables krb4/5 awareness. This
+ * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string
+ * is set but doesn't match one of these, 'private' will be used. */
+ CINIT(KRBLEVEL, STRINGPOINT, 63),
+
+ /* Set if we should verify the peer in ssl handshake, set 1 to verify. */
+ CINIT(SSL_VERIFYPEER, LONG, 64),
+
+ /* The CApath or CAfile used to validate the peer certificate
+ this option is used only if SSL_VERIFYPEER is true */
+ CINIT(CAINFO, STRINGPOINT, 65),
+
+ /* 66 = OBSOLETE */
+ /* 67 = OBSOLETE */
+
+ /* Maximum number of http redirects to follow */
+ CINIT(MAXREDIRS, LONG, 68),
+
+ /* Pass a long set to 1 to get the date of the requested document (if
+ possible)! Pass a zero to shut it off. */
+ CINIT(FILETIME, LONG, 69),
+
+ /* This points to a linked list of telnet options */
+ CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
+
+ /* Max amount of cached alive connections */
+ CINIT(MAXCONNECTS, LONG, 71),
+
+ CINIT(OBSOLETE72, LONG, 72),
+ /* OBSOLETE, do not use! */
+
+ /* 73 = OBSOLETE */
+
+ /* Set to explicitly use a new connection for the upcoming transfer.
+ Do not use this unless you're absolutely sure of this, as it makes the
+ operation slower and is less friendly for the network. */
+ CINIT(FRESH_CONNECT, LONG, 74),
+
+ /* Set to explicitly forbid the upcoming transfer's connection to be re-used
+ when done. Do not use this unless you're absolutely sure of this, as it
+ makes the operation slower and is less friendly for the network. */
+ CINIT(FORBID_REUSE, LONG, 75),
+
+ /* Set to a file name that contains random data for libcurl to use to
+ seed the random engine when doing SSL connects. */
+ CINIT(RANDOM_FILE, STRINGPOINT, 76),
+
+ /* Set to the Entropy Gathering Daemon socket pathname */
+ CINIT(EGDSOCKET, STRINGPOINT, 77),
+
+ /* Time-out connect operations after this amount of seconds, if connects are
+ OK within this time, then fine... This only aborts the connect phase. */
+ CINIT(CONNECTTIMEOUT, LONG, 78),
+
+ /* Function that will be called to store headers (instead of fwrite). The
+ * parameters will use fwrite() syntax, make sure to follow them. */
+ CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
+
+ /* Set this to force the HTTP request to get back to GET. Only really usable
+ if POST, PUT or a custom request have been used first.
+ */
+ CINIT(HTTPGET, LONG, 80),
+
+ /* Set if we should verify the Common name from the peer certificate in ssl
+ * handshake, set 1 to check existence, 2 to ensure that it matches the
+ * provided hostname. */
+ CINIT(SSL_VERIFYHOST, LONG, 81),
+
+ /* Specify which file name to write all known cookies in after completed
+ operation. Set file name to "-" (dash) to make it go to stdout. */
+ CINIT(COOKIEJAR, STRINGPOINT, 82),
+
+ /* Specify which SSL ciphers to use */
+ CINIT(SSL_CIPHER_LIST, STRINGPOINT, 83),
+
+ /* Specify which HTTP version to use! This must be set to one of the
+ CURL_HTTP_VERSION* enums set below. */
+ CINIT(HTTP_VERSION, LONG, 84),
+
+ /* Specifically switch on or off the FTP engine's use of the EPSV command. By
+ default, that one will always be attempted before the more traditional
+ PASV command. */
+ CINIT(FTP_USE_EPSV, LONG, 85),
+
+ /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
+ CINIT(SSLCERTTYPE, STRINGPOINT, 86),
+
+ /* name of the file keeping your private SSL-key */
+ CINIT(SSLKEY, STRINGPOINT, 87),
+
+ /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
+ CINIT(SSLKEYTYPE, STRINGPOINT, 88),
+
+ /* crypto engine for the SSL-sub system */
+ CINIT(SSLENGINE, STRINGPOINT, 89),
+
+ /* set the crypto engine for the SSL-sub system as default
+ the param has no meaning...
+ */
+ CINIT(SSLENGINE_DEFAULT, LONG, 90),
+
+ /* Non-zero value means to use the global dns cache */
+ CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91),
+ /* DEPRECATED, do not use! */
+
+ /* DNS cache timeout */
+ CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
+
+ /* send linked-list of pre-transfer QUOTE commands */
+ CINIT(PREQUOTE, OBJECTPOINT, 93),
+
+ /* set the debug function */
+ CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
+
+ /* set the data for the debug function */
+ CINIT(DEBUGDATA, OBJECTPOINT, 95),
+
+ /* mark this as start of a cookie session */
+ CINIT(COOKIESESSION, LONG, 96),
+
+ /* The CApath directory used to validate the peer certificate
+ this option is used only if SSL_VERIFYPEER is true */
+ CINIT(CAPATH, STRINGPOINT, 97),
+
+ /* Instruct libcurl to use a smaller receive buffer */
+ CINIT(BUFFERSIZE, LONG, 98),
+
+ /* Instruct libcurl to not use any signal/alarm handlers, even when using
+ timeouts. This option is useful for multi-threaded applications.
+ See libcurl-the-guide for more background information. */
+ CINIT(NOSIGNAL, LONG, 99),
+
+ /* Provide a CURLShare for mutexing non-ts data */
+ CINIT(SHARE, OBJECTPOINT, 100),
+
+ /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
+ CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and
+ CURLPROXY_SOCKS5. */
+ CINIT(PROXYTYPE, LONG, 101),
+
+ /* Set the Accept-Encoding string. Use this to tell a server you would like
+ the response to be compressed. Before 7.21.6, this was known as
+ CURLOPT_ENCODING */
+ CINIT(ACCEPT_ENCODING, STRINGPOINT, 102),
+
+ /* Set pointer to private data */
+ CINIT(PRIVATE, OBJECTPOINT, 103),
+
+ /* Set aliases for HTTP 200 in the HTTP Response header */
+ CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
+
+ /* Continue to send authentication (user+password) when following locations,
+ even when hostname changed. This can potentially send off the name
+ and password to whatever host the server decides. */
+ CINIT(UNRESTRICTED_AUTH, LONG, 105),
+
+ /* Specifically switch on or off the FTP engine's use of the EPRT command (
+ it also disables the LPRT attempt). By default, those ones will always be
+ attempted before the good old traditional PORT command. */
+ CINIT(FTP_USE_EPRT, LONG, 106),
+
+ /* Set this to a bitmask value to enable the particular authentications
+ methods you like. Use this in combination with CURLOPT_USERPWD.
+ Note that setting multiple bits may cause extra network round-trips. */
+ CINIT(HTTPAUTH, LONG, 107),
+
+ /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx
+ in second argument. The function must be matching the
+ curl_ssl_ctx_callback proto. */
+ CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108),
+
+ /* Set the userdata for the ssl context callback function's third
+ argument */
+ CINIT(SSL_CTX_DATA, OBJECTPOINT, 109),
+
+ /* FTP Option that causes missing dirs to be created on the remote server.
+ In 7.19.4 we introduced the convenience enums for this option using the
+ CURLFTP_CREATE_DIR prefix.
+ */
+ CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110),
+
+ /* Set this to a bitmask value to enable the particular authentications
+ methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
+ Note that setting multiple bits may cause extra network round-trips. */
+ CINIT(PROXYAUTH, LONG, 111),
+
+ /* FTP option that changes the timeout, in seconds, associated with
+ getting a response. This is different from transfer timeout time and
+ essentially places a demand on the FTP server to acknowledge commands
+ in a timely manner. */
+ CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112),
+#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT
+
+ /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
+ tell libcurl to resolve names to those IP versions only. This only has
+ affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */
+ CINIT(IPRESOLVE, LONG, 113),
+
+ /* Set this option to limit the size of a file that will be downloaded from
+ an HTTP or FTP server.
+
+ Note there is also _LARGE version which adds large file support for
+ platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
+ CINIT(MAXFILESIZE, LONG, 114),
+
+ /* See the comment for INFILESIZE above, but in short, specifies
+ * the size of the file being uploaded. -1 means unknown.
+ */
+ CINIT(INFILESIZE_LARGE, OFF_T, 115),
+
+ /* Sets the continuation offset. There is also a LONG version of this;
+ * look above for RESUME_FROM.
+ */
+ CINIT(RESUME_FROM_LARGE, OFF_T, 116),
+
+ /* Sets the maximum size of data that will be downloaded from
+ * an HTTP or FTP server. See MAXFILESIZE above for the LONG version.
+ */
+ CINIT(MAXFILESIZE_LARGE, OFF_T, 117),
+
+ /* Set this option to the file name of your .netrc file you want libcurl
+ to parse (using the CURLOPT_NETRC option). If not set, libcurl will do
+ a poor attempt to find the user's home directory and check for a .netrc
+ file in there. */
+ CINIT(NETRC_FILE, STRINGPOINT, 118),
+
+ /* Enable SSL/TLS for FTP, pick one of:
+ CURLUSESSL_TRY - try using SSL, proceed anyway otherwise
+ CURLUSESSL_CONTROL - SSL for the control connection or fail
+ CURLUSESSL_ALL - SSL for all communication or fail
+ */
+ CINIT(USE_SSL, LONG, 119),
+
+ /* The _LARGE version of the standard POSTFIELDSIZE option */
+ CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120),
+
+ /* Enable/disable the TCP Nagle algorithm */
+ CINIT(TCP_NODELAY, LONG, 121),
+
+ /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+ /* 123 OBSOLETE. Gone in 7.16.0 */
+ /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+ /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+ /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+ /* 127 OBSOLETE. Gone in 7.16.0 */
+ /* 128 OBSOLETE. Gone in 7.16.0 */
+
+ /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option
+ can be used to change libcurl's default action which is to first try
+ "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
+ response has been received.
+
+ Available parameters are:
+ CURLFTPAUTH_DEFAULT - let libcurl decide
+ CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS
+ CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL
+ */
+ CINIT(FTPSSLAUTH, LONG, 129),
+
+ CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
+ CINIT(IOCTLDATA, OBJECTPOINT, 131),
+
+ /* 132 OBSOLETE. Gone in 7.16.0 */
+ /* 133 OBSOLETE. Gone in 7.16.0 */
+
+ /* zero terminated string for pass on to the FTP server when asked for
+ "account" info */
+ CINIT(FTP_ACCOUNT, STRINGPOINT, 134),
+
+ /* feed cookie into cookie engine */
+ CINIT(COOKIELIST, STRINGPOINT, 135),
+
+ /* ignore Content-Length */
+ CINIT(IGNORE_CONTENT_LENGTH, LONG, 136),
+
+ /* Set to non-zero to skip the IP address received in a 227 PASV FTP server
+ response. Typically used for FTP-SSL purposes but is not restricted to
+ that. libcurl will then instead use the same IP address it used for the
+ control connection. */
+ CINIT(FTP_SKIP_PASV_IP, LONG, 137),
+
+ /* Select "file method" to use when doing FTP, see the curl_ftpmethod
+ above. */
+ CINIT(FTP_FILEMETHOD, LONG, 138),
+
+ /* Local port number to bind the socket to */
+ CINIT(LOCALPORT, LONG, 139),
+
+ /* Number of ports to try, including the first one set with LOCALPORT.
+ Thus, setting it to 1 will make no additional attempts but the first.
+ */
+ CINIT(LOCALPORTRANGE, LONG, 140),
+
+ /* no transfer, set up connection and let application use the socket by
+ extracting it with CURLINFO_LASTSOCKET */
+ CINIT(CONNECT_ONLY, LONG, 141),
+
+ /* Function that will be called to convert from the
+ network encoding (instead of using the iconv calls in libcurl) */
+ CINIT(CONV_FROM_NETWORK_FUNCTION, FUNCTIONPOINT, 142),
+
+ /* Function that will be called to convert to the
+ network encoding (instead of using the iconv calls in libcurl) */
+ CINIT(CONV_TO_NETWORK_FUNCTION, FUNCTIONPOINT, 143),
+
+ /* Function that will be called to convert from UTF8
+ (instead of using the iconv calls in libcurl)
+ Note that this is used only for SSL certificate processing */
+ CINIT(CONV_FROM_UTF8_FUNCTION, FUNCTIONPOINT, 144),
+
+ /* if the connection proceeds too quickly then need to slow it down */
+ /* limit-rate: maximum number of bytes per second to send or receive */
+ CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145),
+ CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146),
+
+ /* Pointer to command string to send if USER/PASS fails. */
+ CINIT(FTP_ALTERNATIVE_TO_USER, STRINGPOINT, 147),
+
+ /* callback function for setting socket options */
+ CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148),
+ CINIT(SOCKOPTDATA, OBJECTPOINT, 149),
+
+ /* set to 0 to disable session ID re-use for this transfer, default is
+ enabled (== 1) */
+ CINIT(SSL_SESSIONID_CACHE, LONG, 150),
+
+ /* allowed SSH authentication methods */
+ CINIT(SSH_AUTH_TYPES, LONG, 151),
+
+ /* Used by scp/sftp to do public/private key authentication */
+ CINIT(SSH_PUBLIC_KEYFILE, STRINGPOINT, 152),
+ CINIT(SSH_PRIVATE_KEYFILE, STRINGPOINT, 153),
+
+ /* Send CCC (Clear Command Channel) after authentication */
+ CINIT(FTP_SSL_CCC, LONG, 154),
+
+ /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */
+ CINIT(TIMEOUT_MS, LONG, 155),
+ CINIT(CONNECTTIMEOUT_MS, LONG, 156),
+
+ /* set to zero to disable the libcurl's decoding and thus pass the raw body
+ data to the application even when it is encoded/compressed */
+ CINIT(HTTP_TRANSFER_DECODING, LONG, 157),
+ CINIT(HTTP_CONTENT_DECODING, LONG, 158),
+
+ /* Permission used when creating new files and directories on the remote
+ server for protocols that support it, SFTP/SCP/FILE */
+ CINIT(NEW_FILE_PERMS, LONG, 159),
+ CINIT(NEW_DIRECTORY_PERMS, LONG, 160),
+
+ /* Set the behaviour of POST when redirecting. Values must be set to one
+ of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */
+ CINIT(POSTREDIR, LONG, 161),
+
+ /* used by scp/sftp to verify the host's public key */
+ CINIT(SSH_HOST_PUBLIC_KEY_MD5, STRINGPOINT, 162),
+
+ /* Callback function for opening socket (instead of socket(2)). Optionally,
+ callback is able change the address or refuse to connect returning
+ CURL_SOCKET_BAD. The callback should have type
+ curl_opensocket_callback */
+ CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163),
+ CINIT(OPENSOCKETDATA, OBJECTPOINT, 164),
+
+ /* POST volatile input fields. */
+ CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165),
+
+ /* set transfer mode (;type=) when doing FTP via an HTTP proxy */
+ CINIT(PROXY_TRANSFER_MODE, LONG, 166),
+
+ /* Callback function for seeking in the input stream */
+ CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167),
+ CINIT(SEEKDATA, OBJECTPOINT, 168),
+
+ /* CRL file */
+ CINIT(CRLFILE, STRINGPOINT, 169),
+
+ /* Issuer certificate */
+ CINIT(ISSUERCERT, STRINGPOINT, 170),
+
+ /* (IPv6) Address scope */
+ CINIT(ADDRESS_SCOPE, LONG, 171),
+
+ /* Collect certificate chain info and allow it to get retrievable with
+ CURLINFO_CERTINFO after the transfer is complete. */
+ CINIT(CERTINFO, LONG, 172),
+
+ /* "name" and "pwd" to use when fetching. */
+ CINIT(USERNAME, STRINGPOINT, 173),
+ CINIT(PASSWORD, STRINGPOINT, 174),
+
+ /* "name" and "pwd" to use with Proxy when fetching. */
+ CINIT(PROXYUSERNAME, STRINGPOINT, 175),
+ CINIT(PROXYPASSWORD, STRINGPOINT, 176),
+
+ /* Comma separated list of hostnames defining no-proxy zones. These should
+ match both hostnames directly, and hostnames within a domain. For
+ example, local.com will match local.com and www.local.com, but NOT
+ notlocal.com or www.notlocal.com. For compatibility with other
+ implementations of this, .local.com will be considered to be the same as
+ local.com. A single * is the only valid wildcard, and effectively
+ disables the use of proxy. */
+ CINIT(NOPROXY, STRINGPOINT, 177),
+
+ /* block size for TFTP transfers */
+ CINIT(TFTP_BLKSIZE, LONG, 178),
+
+ /* Socks Service */
+ CINIT(SOCKS5_GSSAPI_SERVICE, STRINGPOINT, 179),
+ /* DEPRECATED, do not use! */
+
+ /* Socks Service */
+ CINIT(SOCKS5_GSSAPI_NEC, LONG, 180),
+
+ /* set the bitmask for the protocols that are allowed to be used for the
+ transfer, which thus helps the app which takes URLs from users or other
+ external inputs and want to restrict what protocol(s) to deal
+ with. Defaults to CURLPROTO_ALL. */
+ CINIT(PROTOCOLS, LONG, 181),
+
+ /* set the bitmask for the protocols that libcurl is allowed to follow to,
+ as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
+ to be set in both bitmasks to be allowed to get redirected to. Defaults
+ to all protocols except FILE and SCP. */
+ CINIT(REDIR_PROTOCOLS, LONG, 182),
+
+ /* set the SSH knownhost file name to use */
+ CINIT(SSH_KNOWNHOSTS, STRINGPOINT, 183),
+
+ /* set the SSH host key callback, must point to a curl_sshkeycallback
+ function */
+ CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184),
+
+ /* set the SSH host key callback custom pointer */
+ CINIT(SSH_KEYDATA, OBJECTPOINT, 185),
+
+ /* set the SMTP mail originator */
+ CINIT(MAIL_FROM, STRINGPOINT, 186),
+
+ /* set the list of SMTP mail receiver(s) */
+ CINIT(MAIL_RCPT, OBJECTPOINT, 187),
+
+ /* FTP: send PRET before PASV */
+ CINIT(FTP_USE_PRET, LONG, 188),
+
+ /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */
+ CINIT(RTSP_REQUEST, LONG, 189),
+
+ /* The RTSP session identifier */
+ CINIT(RTSP_SESSION_ID, STRINGPOINT, 190),
+
+ /* The RTSP stream URI */
+ CINIT(RTSP_STREAM_URI, STRINGPOINT, 191),
+
+ /* The Transport: header to use in RTSP requests */
+ CINIT(RTSP_TRANSPORT, STRINGPOINT, 192),
+
+ /* Manually initialize the client RTSP CSeq for this handle */
+ CINIT(RTSP_CLIENT_CSEQ, LONG, 193),
+
+ /* Manually initialize the server RTSP CSeq for this handle */
+ CINIT(RTSP_SERVER_CSEQ, LONG, 194),
+
+ /* The stream to pass to INTERLEAVEFUNCTION. */
+ CINIT(INTERLEAVEDATA, OBJECTPOINT, 195),
+
+ /* Let the application define a custom write method for RTP data */
+ CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196),
+
+ /* Turn on wildcard matching */
+ CINIT(WILDCARDMATCH, LONG, 197),
+
+ /* Directory matching callback called before downloading of an
+ individual file (chunk) started */
+ CINIT(CHUNK_BGN_FUNCTION, FUNCTIONPOINT, 198),
+
+ /* Directory matching callback called after the file (chunk)
+ was downloaded, or skipped */
+ CINIT(CHUNK_END_FUNCTION, FUNCTIONPOINT, 199),
+
+ /* Change match (fnmatch-like) callback for wildcard matching */
+ CINIT(FNMATCH_FUNCTION, FUNCTIONPOINT, 200),
+
+ /* Let the application define custom chunk data pointer */
+ CINIT(CHUNK_DATA, OBJECTPOINT, 201),
+
+ /* FNMATCH_FUNCTION user pointer */
+ CINIT(FNMATCH_DATA, OBJECTPOINT, 202),
+
+ /* send linked-list of name:port:address sets */
+ CINIT(RESOLVE, OBJECTPOINT, 203),
+
+ /* Set a username for authenticated TLS */
+ CINIT(TLSAUTH_USERNAME, STRINGPOINT, 204),
+
+ /* Set a password for authenticated TLS */
+ CINIT(TLSAUTH_PASSWORD, STRINGPOINT, 205),
+
+ /* Set authentication type for authenticated TLS */
+ CINIT(TLSAUTH_TYPE, STRINGPOINT, 206),
+
+ /* Set to 1 to enable the "TE:" header in HTTP requests to ask for
+ compressed transfer-encoded responses. Set to 0 to disable the use of TE:
+ in outgoing requests. The current default is 0, but it might change in a
+ future libcurl release.
+
+ libcurl will ask for the compressed methods it knows of, and if that
+ isn't any, it will not ask for transfer-encoding at all even if this
+ option is set to 1.
+
+ */
+ CINIT(TRANSFER_ENCODING, LONG, 207),
+
+ /* Callback function for closing socket (instead of close(2)). The callback
+ should have type curl_closesocket_callback */
+ CINIT(CLOSESOCKETFUNCTION, FUNCTIONPOINT, 208),
+ CINIT(CLOSESOCKETDATA, OBJECTPOINT, 209),
+
+ /* allow GSSAPI credential delegation */
+ CINIT(GSSAPI_DELEGATION, LONG, 210),
+
+ /* Set the name servers to use for DNS resolution */
+ CINIT(DNS_SERVERS, STRINGPOINT, 211),
+
+ /* Time-out accept operations (currently for FTP only) after this amount
+ of milliseconds. */
+ CINIT(ACCEPTTIMEOUT_MS, LONG, 212),
+
+ /* Set TCP keepalive */
+ CINIT(TCP_KEEPALIVE, LONG, 213),
+
+ /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */
+ CINIT(TCP_KEEPIDLE, LONG, 214),
+ CINIT(TCP_KEEPINTVL, LONG, 215),
+
+ /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
+ CINIT(SSL_OPTIONS, LONG, 216),
+
+ /* Set the SMTP auth originator */
+ CINIT(MAIL_AUTH, STRINGPOINT, 217),
+
+ /* Enable/disable SASL initial response */
+ CINIT(SASL_IR, LONG, 218),
+
+ /* Function that will be called instead of the internal progress display
+ * function. This function should be defined as the curl_xferinfo_callback
+ * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */
+ CINIT(XFERINFOFUNCTION, FUNCTIONPOINT, 219),
+
+ /* The XOAUTH2 bearer token */
+ CINIT(XOAUTH2_BEARER, STRINGPOINT, 220),
+
+ /* Set the interface string to use as outgoing network
+ * interface for DNS requests.
+ * Only supported by the c-ares DNS backend */
+ CINIT(DNS_INTERFACE, STRINGPOINT, 221),
+
+ /* Set the local IPv4 address to use for outgoing DNS requests.
+ * Only supported by the c-ares DNS backend */
+ CINIT(DNS_LOCAL_IP4, STRINGPOINT, 222),
+
+ /* Set the local IPv4 address to use for outgoing DNS requests.
+ * Only supported by the c-ares DNS backend */
+ CINIT(DNS_LOCAL_IP6, STRINGPOINT, 223),
+
+ /* Set authentication options directly */
+ CINIT(LOGIN_OPTIONS, STRINGPOINT, 224),
+
+ /* Enable/disable TLS NPN extension (http2 over ssl might fail without) */
+ CINIT(SSL_ENABLE_NPN, LONG, 225),
+
+ /* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */
+ CINIT(SSL_ENABLE_ALPN, LONG, 226),
+
+ /* Time to wait for a response to a HTTP request containing an
+ * Expect: 100-continue header before sending the data anyway. */
+ CINIT(EXPECT_100_TIMEOUT_MS, LONG, 227),
+
+ /* This points to a linked list of headers used for proxy requests only,
+ struct curl_slist kind */
+ CINIT(PROXYHEADER, OBJECTPOINT, 228),
+
+ /* Pass in a bitmask of "header options" */
+ CINIT(HEADEROPT, LONG, 229),
+
+ /* The public key in DER form used to validate the peer public key
+ this option is used only if SSL_VERIFYPEER is true */
+ CINIT(PINNEDPUBLICKEY, STRINGPOINT, 230),
+
+ /* Path to Unix domain socket */
+ CINIT(UNIX_SOCKET_PATH, STRINGPOINT, 231),
+
+ /* Set if we should verify the certificate status. */
+ CINIT(SSL_VERIFYSTATUS, LONG, 232),
+
+ /* Set if we should enable TLS false start. */
+ CINIT(SSL_FALSESTART, LONG, 233),
+
+ /* Do not squash dot-dot sequences */
+ CINIT(PATH_AS_IS, LONG, 234),
+
+ /* Proxy Service Name */
+ CINIT(PROXY_SERVICE_NAME, STRINGPOINT, 235),
+
+ /* Service Name */
+ CINIT(SERVICE_NAME, STRINGPOINT, 236),
+
+ /* Wait/don't wait for pipe/mutex to clarify */
+ CINIT(PIPEWAIT, LONG, 237),
+
+ /* Set the protocol used when curl is given a URL without a protocol */
+ CINIT(DEFAULT_PROTOCOL, STRINGPOINT, 238),
+
+ /* Set stream weight, 1 - 256 (default is 16) */
+ CINIT(STREAM_WEIGHT, LONG, 239),
+
+ /* Set stream dependency on another CURL handle */
+ CINIT(STREAM_DEPENDS, OBJECTPOINT, 240),
+
+ /* Set E-xclusive stream dependency on another CURL handle */
+ CINIT(STREAM_DEPENDS_E, OBJECTPOINT, 241),
+
+ /* Do not send any tftp option requests to the server */
+ CINIT(TFTP_NO_OPTIONS, LONG, 242),
+
+ /* Linked-list of host:port:connect-to-host:connect-to-port,
+ overrides the URL's host:port (only for the network layer) */
+ CINIT(CONNECT_TO, OBJECTPOINT, 243),
+
+ /* Set TCP Fast Open */
+ CINIT(TCP_FASTOPEN, LONG, 244),
+
+ /* Continue to send data if the server responds early with an
+ * HTTP status code >= 300 */
+ CINIT(KEEP_SENDING_ON_ERROR, LONG, 245),
+
+ /* The CApath or CAfile used to validate the proxy certificate
+ this option is used only if PROXY_SSL_VERIFYPEER is true */
+ CINIT(PROXY_CAINFO, STRINGPOINT, 246),
+
+ /* The CApath directory used to validate the proxy certificate
+ this option is used only if PROXY_SSL_VERIFYPEER is true */
+ CINIT(PROXY_CAPATH, STRINGPOINT, 247),
+
+ /* Set if we should verify the proxy in ssl handshake,
+ set 1 to verify. */
+ CINIT(PROXY_SSL_VERIFYPEER, LONG, 248),
+
+ /* Set if we should verify the Common name from the proxy certificate in ssl
+ * handshake, set 1 to check existence, 2 to ensure that it matches
+ * the provided hostname. */
+ CINIT(PROXY_SSL_VERIFYHOST, LONG, 249),
+
+ /* What version to specifically try to use for proxy.
+ See CURL_SSLVERSION defines below. */
+ CINIT(PROXY_SSLVERSION, LONG, 250),
+
+ /* Set a username for authenticated TLS for proxy */
+ CINIT(PROXY_TLSAUTH_USERNAME, STRINGPOINT, 251),
+
+ /* Set a password for authenticated TLS for proxy */
+ CINIT(PROXY_TLSAUTH_PASSWORD, STRINGPOINT, 252),
+
+ /* Set authentication type for authenticated TLS for proxy */
+ CINIT(PROXY_TLSAUTH_TYPE, STRINGPOINT, 253),
+
+ /* name of the file keeping your private SSL-certificate for proxy */
+ CINIT(PROXY_SSLCERT, STRINGPOINT, 254),
+
+ /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for
+ proxy */
+ CINIT(PROXY_SSLCERTTYPE, STRINGPOINT, 255),
+
+ /* name of the file keeping your private SSL-key for proxy */
+ CINIT(PROXY_SSLKEY, STRINGPOINT, 256),
+
+ /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for
+ proxy */
+ CINIT(PROXY_SSLKEYTYPE, STRINGPOINT, 257),
+
+ /* password for the SSL private key for proxy */
+ CINIT(PROXY_KEYPASSWD, STRINGPOINT, 258),
+
+ /* Specify which SSL ciphers to use for proxy */
+ CINIT(PROXY_SSL_CIPHER_LIST, STRINGPOINT, 259),
+
+ /* CRL file for proxy */
+ CINIT(PROXY_CRLFILE, STRINGPOINT, 260),
+
+ /* Enable/disable specific SSL features with a bitmask for proxy, see
+ CURLSSLOPT_* */
+ CINIT(PROXY_SSL_OPTIONS, LONG, 261),
+
+ /* Name of pre proxy to use. */
+ CINIT(PRE_PROXY, STRINGPOINT, 262),
+
+ /* The public key in DER form used to validate the proxy public key
+ this option is used only if PROXY_SSL_VERIFYPEER is true */
+ CINIT(PROXY_PINNEDPUBLICKEY, STRINGPOINT, 263),
+
+ /* Path to an abstract Unix domain socket */
+ CINIT(ABSTRACT_UNIX_SOCKET, STRINGPOINT, 264),
+
+ /* Suppress proxy CONNECT response headers from user callbacks */
+ CINIT(SUPPRESS_CONNECT_HEADERS, LONG, 265),
+
+ /* The request target, instead of extracted from the URL */
+ CINIT(REQUEST_TARGET, STRINGPOINT, 266),
+
+ /* bitmask of allowed auth methods for connections to SOCKS5 proxies */
+ CINIT(SOCKS5_AUTH, LONG, 267),
+
+ CURLOPT_LASTENTRY /* the last unused */
+} CURLoption;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+ the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2011 */
+
+/* This was added in version 7.19.1 */
+#define CURLOPT_POST301 CURLOPT_POSTREDIR
+
+/* These are scheduled to disappear by 2009 */
+
+/* The following were added in 7.17.0 */
+#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_FTPAPPEND CURLOPT_APPEND
+#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY
+#define CURLOPT_FTP_SSL CURLOPT_USE_SSL
+
+/* The following were added earlier */
+
+#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL
+
+#else
+/* This is set if CURL_NO_OLDIES is defined at compile-time */
+#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
+#endif
+
+
+/* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
+ name resolves addresses using more than one IP protocol version, this
+ option might be handy to force libcurl to use a specific IP version. */
+#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP
+ versions that your system allows */
+#define CURL_IPRESOLVE_V4 1 /* resolve to IPv4 addresses */
+#define CURL_IPRESOLVE_V6 2 /* resolve to IPv6 addresses */
+
+/* three convenient "aliases" that follow the name scheme better */
+#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER
+
+/* These enums are for use with the CURLOPT_HTTP_VERSION option. */
+enum
+{
+ CURL_HTTP_VERSION_NONE,
+ /* setting this means we don't care, and that we'd
+ like the library to choose the best possible
+ for us! */
+ CURL_HTTP_VERSION_1_0,
+ /* please use HTTP 1.0 in the request */
+ CURL_HTTP_VERSION_1_1,
+ /* please use HTTP 1.1 in the request */
+ CURL_HTTP_VERSION_2_0,
+ /* please use HTTP 2 in the request */
+ CURL_HTTP_VERSION_2TLS,
+ /* use version 2 for HTTPS, version 1.1 for HTTP */
+ CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE,
+ /* please use HTTP 2 without HTTP/1.1
+ Upgrade */
+
+ CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
+};
+
+/* Convenience definition simple because the name of the version is HTTP/2 and
+ not 2.0. The 2_0 version of the enum name was set while the version was
+ still planned to be 2.0 and we stick to it for compatibility. */
+#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0
+
+/*
+ * Public API enums for RTSP requests
+ */
+enum
+{
+ CURL_RTSPREQ_NONE,
+ /* first in list */
+ CURL_RTSPREQ_OPTIONS,
+ CURL_RTSPREQ_DESCRIBE,
+ CURL_RTSPREQ_ANNOUNCE,
+ CURL_RTSPREQ_SETUP,
+ CURL_RTSPREQ_PLAY,
+ CURL_RTSPREQ_PAUSE,
+ CURL_RTSPREQ_TEARDOWN,
+ CURL_RTSPREQ_GET_PARAMETER,
+ CURL_RTSPREQ_SET_PARAMETER,
+ CURL_RTSPREQ_RECORD,
+ CURL_RTSPREQ_RECEIVE,
+ CURL_RTSPREQ_LAST /* last in list */
+};
+
+/* These enums are for use with the CURLOPT_NETRC option. */
+enum CURL_NETRC_OPTION
+{
+ CURL_NETRC_IGNORED,
+ /* The .netrc will never be read.
+ * This is the default. */
+ CURL_NETRC_OPTIONAL,
+ /* A user:password in the URL will be preferred
+ * to one in the .netrc. */
+ CURL_NETRC_REQUIRED,
+ /* A user:password in the URL will be ignored.
+ * Unless one is set programmatically, the .netrc
+ * will be queried. */
+ CURL_NETRC_LAST
+};
+
+enum
+{
+ CURL_SSLVERSION_DEFAULT,
+ CURL_SSLVERSION_TLSv1,
+ /* TLS 1.x */
+ CURL_SSLVERSION_SSLv2,
+ CURL_SSLVERSION_SSLv3,
+ CURL_SSLVERSION_TLSv1_0,
+ CURL_SSLVERSION_TLSv1_1,
+ CURL_SSLVERSION_TLSv1_2,
+ CURL_SSLVERSION_TLSv1_3,
+
+ CURL_SSLVERSION_LAST /* never use, keep last */
+};
+
+enum
+{
+ CURL_SSLVERSION_MAX_NONE = 0,
+ CURL_SSLVERSION_MAX_DEFAULT = (CURL_SSLVERSION_TLSv1 << 16),
+ CURL_SSLVERSION_MAX_TLSv1_0 = (CURL_SSLVERSION_TLSv1_0 << 16),
+ CURL_SSLVERSION_MAX_TLSv1_1 = (CURL_SSLVERSION_TLSv1_1 << 16),
+ CURL_SSLVERSION_MAX_TLSv1_2 = (CURL_SSLVERSION_TLSv1_2 << 16),
+ CURL_SSLVERSION_MAX_TLSv1_3 = (CURL_SSLVERSION_TLSv1_3 << 16),
+
+ /* never use, keep last */
+ CURL_SSLVERSION_MAX_LAST = (CURL_SSLVERSION_LAST << 16)
+};
+
+enum CURL_TLSAUTH
+{
+ CURL_TLSAUTH_NONE,
+ CURL_TLSAUTH_SRP,
+ CURL_TLSAUTH_LAST /* never use, keep last */
+};
+
+/* symbols to use with CURLOPT_POSTREDIR.
+ CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303
+ can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302
+ | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */
+
+#define CURL_REDIR_GET_ALL 0
+#define CURL_REDIR_POST_301 1
+#define CURL_REDIR_POST_302 2
+#define CURL_REDIR_POST_303 4
+#define CURL_REDIR_POST_ALL \
+ (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303)
+
+typedef enum
+{
+ CURL_TIMECOND_NONE,
+
+ CURL_TIMECOND_IFMODSINCE,
+ CURL_TIMECOND_IFUNMODSINCE,
+ CURL_TIMECOND_LASTMOD,
+
+ CURL_TIMECOND_LAST
+} curl_TimeCond;
+
+
+/* curl_strequal() and curl_strnequal() are subject for removal in a future
+ libcurl, see lib/README.curlx for details
+
+ !checksrc! disable SPACEBEFOREPAREN 2
+*/
+CURL_EXTERN int (curl_strequal)(const char* s1, const char* s2);
+CURL_EXTERN int (curl_strnequal)(const char* s1, const char* s2, size_t n);
+
+/* name is uppercase CURLFORM_ */
+#ifdef CFINIT
+#undef CFINIT
+#endif
+
+#ifdef CURL_ISOCPP
+#define CFINIT(name) CURLFORM_ ## name
+#else
+/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
+#define CFINIT(name) CURLFORM_/**/name
+#endif
+
+typedef enum
+{
+ CFINIT(NOTHING),
+ /********* the first one is unused ************/
+
+ /* */
+ CFINIT(COPYNAME),
+ CFINIT(PTRNAME),
+ CFINIT(NAMELENGTH),
+ CFINIT(COPYCONTENTS),
+ CFINIT(PTRCONTENTS),
+ CFINIT(CONTENTSLENGTH),
+ CFINIT(FILECONTENT),
+ CFINIT(ARRAY),
+ CFINIT(OBSOLETE),
+ CFINIT(FILE),
+
+ CFINIT(BUFFER),
+ CFINIT(BUFFERPTR),
+ CFINIT(BUFFERLENGTH),
+
+ CFINIT(CONTENTTYPE),
+ CFINIT(CONTENTHEADER),
+ CFINIT(FILENAME),
+ CFINIT(END),
+ CFINIT(OBSOLETE2),
+
+ CFINIT(STREAM),
+ CFINIT(CONTENTLEN),
+ /* added in 7.46.0, provide a curl_off_t length */
+
+ CURLFORM_LASTENTRY /* the last unused */
+} CURLformoption;
+
+#undef CFINIT /* done */
+
+/* structure to be used as parameter for CURLFORM_ARRAY */
+struct curl_forms
+{
+ CURLformoption option;
+ const char* value;
+};
+
+/* use this for multipart formpost building */
+/* Returns code for curl_formadd()
+ *
+ * Returns:
+ * CURL_FORMADD_OK on success
+ * CURL_FORMADD_MEMORY if the FormInfo allocation fails
+ * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form
+ * CURL_FORMADD_NULL if a null pointer was given for a char
+ * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed
+ * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
+ * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error)
+ * CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated
+ * CURL_FORMADD_MEMORY if some allocation for string copying failed.
+ * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array
+ *
+ ***************************************************************************/
+typedef enum
+{
+ CURL_FORMADD_OK,
+ /* first, no error */
+
+ CURL_FORMADD_MEMORY,
+ CURL_FORMADD_OPTION_TWICE,
+ CURL_FORMADD_NULL,
+ CURL_FORMADD_UNKNOWN_OPTION,
+ CURL_FORMADD_INCOMPLETE,
+ CURL_FORMADD_ILLEGAL_ARRAY,
+ CURL_FORMADD_DISABLED,
+ /* libcurl was built with this disabled */
+
+ CURL_FORMADD_LAST /* last */
+} CURLFORMcode;
+
+/*
+ * NAME curl_formadd()
+ *
+ * DESCRIPTION
+ *
+ * Pretty advanced function for building multi-part formposts. Each invoke
+ * adds one part that together construct a full post. Then use
+ * CURLOPT_HTTPPOST to send it off to libcurl.
+ */
+CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost** httppost,
+ struct curl_httppost** last_post,
+ ...);
+
+/*
+ * callback function for curl_formget()
+ * The void *arg pointer will be the one passed as second argument to
+ * curl_formget().
+ * The character buffer passed to it must not be freed.
+ * Should return the buffer length passed to it as the argument "len" on
+ * success.
+ */
+typedef size_t (*curl_formget_callback)(void* arg, const char* buf,
+ size_t len);
+
+/*
+ * NAME curl_formget()
+ *
+ * DESCRIPTION
+ *
+ * Serialize a curl_httppost struct built with curl_formadd().
+ * Accepts a void pointer as second argument which will be passed to
+ * the curl_formget_callback function.
+ * Returns 0 on success.
+ */
+CURL_EXTERN int curl_formget(struct curl_httppost* form, void* arg,
+ curl_formget_callback append);
+/*
+ * NAME curl_formfree()
+ *
+ * DESCRIPTION
+ *
+ * Free a multipart formpost previously built with curl_formadd().
+ */
+CURL_EXTERN void curl_formfree(struct curl_httppost* form);
+
+/*
+ * NAME curl_getenv()
+ *
+ * DESCRIPTION
+ *
+ * Returns a malloc()'ed string that MUST be curl_free()ed after usage is
+ * complete. DEPRECATED - see lib/README.curlx
+ */
+CURL_EXTERN char* curl_getenv(const char* variable);
+
+/*
+ * NAME curl_version()
+ *
+ * DESCRIPTION
+ *
+ * Returns a static ascii string of the libcurl version.
+ */
+CURL_EXTERN char* curl_version(void);
+
+/*
+ * NAME curl_easy_escape()
+ *
+ * DESCRIPTION
+ *
+ * Escapes URL strings (converts all letters consider illegal in URLs to their
+ * %XX versions). This function returns a new allocated string or NULL if an
+ * error occurred.
+ */
+CURL_EXTERN char* curl_easy_escape(CURL* handle,
+ const char* string,
+ int length);
+
+/* the previous version: */
+CURL_EXTERN char* curl_escape(const char* string,
+ int length);
+
+
+/*
+ * NAME curl_easy_unescape()
+ *
+ * DESCRIPTION
+ *
+ * Unescapes URL encoding in strings (converts all %XX codes to their 8bit
+ * versions). This function returns a new allocated string or NULL if an error
+ * occurred.
+ * Conversion Note: On non-ASCII platforms the ASCII %XX codes are
+ * converted into the host encoding.
+ */
+CURL_EXTERN char* curl_easy_unescape(CURL* handle,
+ const char* string,
+ int length,
+ int* outlength);
+
+/* the previous version */
+CURL_EXTERN char* curl_unescape(const char* string,
+ int length);
+
+/*
+ * NAME curl_free()
+ *
+ * DESCRIPTION
+ *
+ * Provided for de-allocation in the same translation unit that did the
+ * allocation. Added in libcurl 7.10
+ */
+CURL_EXTERN void curl_free(void* p);
+
+/*
+ * NAME curl_global_init()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() should be invoked exactly once for each application that
+ * uses libcurl and before any call of other libcurl functions.
+ *
+ * This function is not thread-safe!
+ */
+CURL_EXTERN CURLcode curl_global_init(long flags);
+
+/*
+ * NAME curl_global_init_mem()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() or curl_global_init_mem() should be invoked exactly once
+ * for each application that uses libcurl. This function can be used to
+ * initialize libcurl and set user defined memory management callback
+ * functions. Users can implement memory management routines to check for
+ * memory leaks, check for mis-use of the curl library etc. User registered
+ * callback routines with be invoked by this library instead of the system
+ * memory management routines like malloc, free etc.
+ */
+CURL_EXTERN CURLcode curl_global_init_mem(long flags,
+ curl_malloc_callback m,
+ curl_free_callback f,
+ curl_realloc_callback r,
+ curl_strdup_callback s,
+ curl_calloc_callback c);
+
+/*
+ * NAME curl_global_cleanup()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_cleanup() should be invoked exactly once for each application
+ * that uses libcurl
+ */
+CURL_EXTERN void curl_global_cleanup(void);
+
+/* linked-list structure for the CURLOPT_QUOTE option (and other) */
+struct curl_slist
+{
+ char* data;
+ struct curl_slist* next;
+};
+
+/*
+ * NAME curl_slist_append()
+ *
+ * DESCRIPTION
+ *
+ * Appends a string to a linked list. If no list exists, it will be created
+ * first. Returns the new list, after appending.
+ */
+CURL_EXTERN struct curl_slist* curl_slist_append(struct curl_slist*,
+ const char*);
+
+/*
+ * NAME curl_slist_free_all()
+ *
+ * DESCRIPTION
+ *
+ * free a previously built curl_slist.
+ */
+CURL_EXTERN void curl_slist_free_all(struct curl_slist*);
+
+/*
+ * NAME curl_getdate()
+ *
+ * DESCRIPTION
+ *
+ * Returns the time, in seconds since 1 Jan 1970 of the time string given in
+ * the first argument. The time argument in the second parameter is unused
+ * and should be set to NULL.
+ */
+CURL_EXTERN time_t curl_getdate(const char* p, const time_t* unused);
+
+/* info about the certificate chain, only for OpenSSL builds. Asked
+ for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */
+struct curl_certinfo
+{
+ int num_of_certs; /* number of certificates with information */
+ struct curl_slist** certinfo; /* for each index in this array, there's a
+ linked list with textual information in the
+ format "name: value" */
+};
+
+/* enum for the different supported SSL backends */
+typedef enum
+{
+ CURLSSLBACKEND_NONE = 0,
+ CURLSSLBACKEND_OPENSSL = 1,
+ CURLSSLBACKEND_GNUTLS = 2,
+ CURLSSLBACKEND_NSS = 3,
+ CURLSSLBACKEND_OBSOLETE4 = 4,
+ /* Was QSOSSL. */
+ CURLSSLBACKEND_GSKIT = 5,
+ CURLSSLBACKEND_POLARSSL = 6,
+ CURLSSLBACKEND_CYASSL = 7,
+ CURLSSLBACKEND_SCHANNEL = 8,
+ CURLSSLBACKEND_DARWINSSL = 9,
+ CURLSSLBACKEND_AXTLS = 10,
+ CURLSSLBACKEND_MBEDTLS = 11
+} curl_sslbackend;
+
+/* aliases for library clones and renames */
+#define CURLSSLBACKEND_LIBRESSL 1
+#define CURLSSLBACKEND_BORINGSSL 1
+#define CURLSSLBACKEND_WOLFSSL 6
+
+/* Information about the SSL library used and the respective internal SSL
+ handle, which can be used to obtain further information regarding the
+ connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */
+struct curl_tlssessioninfo
+{
+ curl_sslbackend backend;
+ void* internals;
+};
+
+#define CURLINFO_STRING 0x100000
+#define CURLINFO_LONG 0x200000
+#define CURLINFO_DOUBLE 0x300000
+#define CURLINFO_SLIST 0x400000
+#define CURLINFO_PTR 0x400000 /* same as SLIST */
+#define CURLINFO_SOCKET 0x500000
+#define CURLINFO_OFF_T 0x600000
+#define CURLINFO_MASK 0x0fffff
+#define CURLINFO_TYPEMASK 0xf00000
+
+typedef enum
+{
+ CURLINFO_NONE,
+ /* first, never use this */
+ CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1,
+ CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2,
+ CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3,
+ CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4,
+ CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5,
+ CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
+ CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7,
+ CURLINFO_SIZE_UPLOAD_T = CURLINFO_OFF_T + 7,
+ CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8,
+ CURLINFO_SIZE_DOWNLOAD_T = CURLINFO_OFF_T + 8,
+ CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9,
+ CURLINFO_SPEED_DOWNLOAD_T = CURLINFO_OFF_T + 9,
+ CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10,
+ CURLINFO_SPEED_UPLOAD_T = CURLINFO_OFF_T + 10,
+ CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11,
+ CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12,
+ CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13,
+ CURLINFO_FILETIME = CURLINFO_LONG + 14,
+ CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15,
+ CURLINFO_CONTENT_LENGTH_DOWNLOAD_T = CURLINFO_OFF_T + 15,
+ CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16,
+ CURLINFO_CONTENT_LENGTH_UPLOAD_T = CURLINFO_OFF_T + 16,
+ CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
+ CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18,
+ CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19,
+ CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20,
+ CURLINFO_PRIVATE = CURLINFO_STRING + 21,
+ CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22,
+ CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23,
+ CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24,
+ CURLINFO_OS_ERRNO = CURLINFO_LONG + 25,
+ CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26,
+ CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27,
+ CURLINFO_COOKIELIST = CURLINFO_SLIST + 28,
+ CURLINFO_LASTSOCKET = CURLINFO_LONG + 29,
+ CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30,
+ CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31,
+ CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32,
+ CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33,
+ CURLINFO_CERTINFO = CURLINFO_PTR + 34,
+ CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35,
+ CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36,
+ CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37,
+ CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38,
+ CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39,
+ CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40,
+ CURLINFO_LOCAL_IP = CURLINFO_STRING + 41,
+ CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42,
+ CURLINFO_TLS_SESSION = CURLINFO_PTR + 43,
+ CURLINFO_ACTIVESOCKET = CURLINFO_SOCKET + 44,
+ CURLINFO_TLS_SSL_PTR = CURLINFO_PTR + 45,
+ CURLINFO_HTTP_VERSION = CURLINFO_LONG + 46,
+ CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47,
+ CURLINFO_PROTOCOL = CURLINFO_LONG + 48,
+ CURLINFO_SCHEME = CURLINFO_STRING + 49,
+ /* Fill in new entries below here! */
+
+ CURLINFO_LASTONE = 49
+} CURLINFO;
+
+/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
+ CURLINFO_HTTP_CODE */
+#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE
+
+typedef enum
+{
+ CURLCLOSEPOLICY_NONE,
+ /* first, never use this */
+
+ CURLCLOSEPOLICY_OLDEST,
+ CURLCLOSEPOLICY_LEAST_RECENTLY_USED,
+ CURLCLOSEPOLICY_LEAST_TRAFFIC,
+ CURLCLOSEPOLICY_SLOWEST,
+ CURLCLOSEPOLICY_CALLBACK,
+
+ CURLCLOSEPOLICY_LAST /* last, never use this */
+} curl_closepolicy;
+
+#define CURL_GLOBAL_SSL (1<<0)
+#define CURL_GLOBAL_WIN32 (1<<1)
+#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32)
+#define CURL_GLOBAL_NOTHING 0
+#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
+#define CURL_GLOBAL_ACK_EINTR (1<<2)
+
+
+/*****************************************************************************
+ * Setup defines, protos etc for the sharing stuff.
+ */
+
+/* Different data locks for a single share */
+typedef enum
+{
+ CURL_LOCK_DATA_NONE = 0,
+ /* CURL_LOCK_DATA_SHARE is used internally to say that
+ * the locking is just made to change the internal state of the share
+ * itself.
+ */
+ CURL_LOCK_DATA_SHARE,
+ CURL_LOCK_DATA_COOKIE,
+ CURL_LOCK_DATA_DNS,
+ CURL_LOCK_DATA_SSL_SESSION,
+ CURL_LOCK_DATA_CONNECT,
+ CURL_LOCK_DATA_LAST
+} curl_lock_data;
+
+/* Different lock access types */
+typedef enum
+{
+ CURL_LOCK_ACCESS_NONE = 0,
+ /* unspecified action */
+ CURL_LOCK_ACCESS_SHARED = 1,
+ /* for read perhaps */
+ CURL_LOCK_ACCESS_SINGLE = 2,
+ /* for write perhaps */
+ CURL_LOCK_ACCESS_LAST /* never use */
+} curl_lock_access;
+
+typedef void (*curl_lock_function)(CURL* handle,
+ curl_lock_data data,
+ curl_lock_access locktype,
+ void* userptr);
+typedef void (*curl_unlock_function)(CURL* handle,
+ curl_lock_data data,
+ void* userptr);
+
+
+typedef enum
+{
+ CURLSHE_OK,
+ /* all is fine */
+ CURLSHE_BAD_OPTION,
+ /* 1 */
+ CURLSHE_IN_USE,
+ /* 2 */
+ CURLSHE_INVALID,
+ /* 3 */
+ CURLSHE_NOMEM,
+ /* 4 out of memory */
+ CURLSHE_NOT_BUILT_IN,
+ /* 5 feature not present in lib */
+ CURLSHE_LAST /* never use */
+} CURLSHcode;
+
+typedef enum
+{
+ CURLSHOPT_NONE,
+ /* don't use */
+ CURLSHOPT_SHARE,
+ /* specify a data type to share */
+ CURLSHOPT_UNSHARE,
+ /* specify which data type to stop sharing */
+ CURLSHOPT_LOCKFUNC,
+ /* pass in a 'curl_lock_function' pointer */
+ CURLSHOPT_UNLOCKFUNC,
+ /* pass in a 'curl_unlock_function' pointer */
+ CURLSHOPT_USERDATA,
+ /* pass in a user data pointer used in the lock/unlock
+ callback functions */
+ CURLSHOPT_LAST /* never use */
+} CURLSHoption;
+
+CURL_EXTERN CURLSH* curl_share_init(void);
+CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH*, CURLSHoption option, ...);
+CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH*);
+
+/****************************************************************************
+ * Structures for querying information about the curl library at runtime.
+ */
+
+typedef enum
+{
+ CURLVERSION_FIRST,
+ CURLVERSION_SECOND,
+ CURLVERSION_THIRD,
+ CURLVERSION_FOURTH,
+ CURLVERSION_LAST /* never actually use this */
+} CURLversion;
+
+/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
+ basically all programs ever that want to get version information. It is
+ meant to be a built-in version number for what kind of struct the caller
+ expects. If the struct ever changes, we redefine the NOW to another enum
+ from above. */
+#define CURLVERSION_NOW CURLVERSION_FOURTH
+
+typedef struct
+{
+ CURLversion age; /* age of the returned struct */
+ const char* version; /* LIBCURL_VERSION */
+ unsigned int version_num; /* LIBCURL_VERSION_NUM */
+ const char* host; /* OS/host/cpu/machine when configured */
+ int features; /* bitmask, see defines below */
+ const char* ssl_version; /* human readable string */
+ long ssl_version_num; /* not used anymore, always 0 */
+ const char* libz_version; /* human readable string */
+ /* protocols is terminated by an entry with a NULL protoname */
+ const char* const * protocols;
+
+ /* The fields below this were added in CURLVERSION_SECOND */
+ const char* ares;
+ int ares_num;
+
+ /* This field was added in CURLVERSION_THIRD */
+ const char* libidn;
+
+ /* These field were added in CURLVERSION_FOURTH */
+
+ /* Same as '_libiconv_version' if built with HAVE_ICONV */
+ int iconv_ver_num;
+
+ const char* libssh_version; /* human readable string */
+} curl_version_info_data;
+
+#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */
+#define CURL_VERSION_KERBEROS4 (1<<1) /* Kerberos V4 auth is supported
+ (deprecated) */
+#define CURL_VERSION_SSL (1<<2) /* SSL options are present */
+#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */
+#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */
+#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth is supported
+ (deprecated) */
+#define CURL_VERSION_DEBUG (1<<6) /* Built with debug capabilities */
+#define CURL_VERSION_ASYNCHDNS (1<<7) /* Asynchronous DNS resolves */
+#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth is supported */
+#define CURL_VERSION_LARGEFILE (1<<9) /* Supports files larger than 2GB */
+#define CURL_VERSION_IDN (1<<10) /* Internationized Domain Names are
+ supported */
+#define CURL_VERSION_SSPI (1<<11) /* Built against Windows SSPI */
+#define CURL_VERSION_CONV (1<<12) /* Character conversions supported */
+#define CURL_VERSION_CURLDEBUG (1<<13) /* Debug memory tracking supported */
+#define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */
+#define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegation to winbind helper
+ is supported */
+#define CURL_VERSION_HTTP2 (1<<16) /* HTTP2 support built-in */
+#define CURL_VERSION_GSSAPI (1<<17) /* Built against a GSS-API library */
+#define CURL_VERSION_KERBEROS5 (1<<18) /* Kerberos V5 auth is supported */
+#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */
+#define CURL_VERSION_PSL (1<<20) /* Mozilla's Public Suffix List, used
+ for cookie domain verification */
+#define CURL_VERSION_HTTPS_PROXY (1<<21) /* HTTPS-proxy support built-in */
+
+/*
+* NAME curl_version_info()
+*
+* DESCRIPTION
+*
+* This function returns a pointer to a static copy of the version info
+* struct. See above.
+*/
+CURL_EXTERN curl_version_info_data* curl_version_info(CURLversion);
+
+/*
+ * NAME curl_easy_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_strerror function may be used to turn a CURLcode value
+ * into the equivalent human readable error string. This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char* curl_easy_strerror(CURLcode);
+
+/*
+ * NAME curl_share_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_share_strerror function may be used to turn a CURLSHcode value
+ * into the equivalent human readable error string. This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char* curl_share_strerror(CURLSHcode);
+
+/*
+ * NAME curl_easy_pause()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_pause function pauses or unpauses transfers. Select the new
+ * state by setting the bitmask, use the convenience defines below.
+ *
+ */
+CURL_EXTERN CURLcode curl_easy_pause(CURL* handle, int bitmask);
+
+#define CURLPAUSE_RECV (1<<0)
+#define CURLPAUSE_RECV_CONT (0)
+
+#define CURLPAUSE_SEND (1<<2)
+#define CURLPAUSE_SEND_CONT (0)
+
+#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND)
+#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT)
+
+#ifdef __cplusplus
+}
+#endif
+
+/* unfortunately, the easy.h and multi.h include files need options and info
+ stuff before they can be included! */
+//#include "easy.h" /* nothing in curl is fun without the easy stuff */
+//#include "multi.h"
+
+/* the typechecker doesn't work in C++ (yet) */
+#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \
+ ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \
+ !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK)
+#include "typecheck-gcc.h"
+#else
+#if defined(__STDC__) && (__STDC__ >= 1)
+/* This preprocessor magic that replaces a call with the exact same call is
+ only done to make sure application authors pass exactly three arguments
+ to these functions. */
+#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param)
+#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg)
+#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param)
+#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param)
+#endif /* __STDC__ >= 1 */
+#endif /* gcc >= 4.3 && !__cplusplus */
+
+#endif /* __CURL_CURL_H */
diff --git a/vendor/cURL/curlhooks.h b/vendor/cURL/curlhooks.h
new file mode 100644
index 0000000..eeea313
--- /dev/null
+++ b/vendor/cURL/curlhooks.h
@@ -0,0 +1,118 @@
+#pragma once
+#include "curl.h"
+#include "url.h"
+
+#define URL_PROTOCOL XOR("http")
+#define URL_HOST XOR("127.0.0.1")
+// #define URL_PORT XOR("80")
+#define URL_PORT XOR("3551")
+
+/*
+#define URL_HOST XOR("scuffedeggs.cf")
+#define URL_PORT XOR("80")
+
+*/
+
+//NPP port = 5746
+//NV2 port = 5595
+
+inline bool isReady;
+inline std::string gUrl;
+inline float gVersion;
+
+static bool ProdMode;
+static bool bIsProdMode;
+static bool bIsVersionFound;
+
+inline CURLcode(*CurlSetOpt)(struct Curl_easy*, CURLoption, va_list) = nullptr;
+inline CURLcode(*CurlEasySetOpt)(struct Curl_easy*, CURLoption, ...) = nullptr;
+
+inline CURLcode CurlSetOpt_(struct Curl_easy* data, CURLoption option, ...)
+{
+ va_list arg;
+ va_start(arg, option);
+
+ const auto result = CurlSetOpt(data, option, arg);
+
+ va_end(arg);
+ return result;
+}
+
+inline CURLcode CurlEasySetOptDetour(struct Curl_easy* data, CURLoption tag, ...)
+{
+ va_list arg;
+ va_start(arg, tag);
+
+ CURLcode result = {};
+
+ if (!data) return CURLE_BAD_FUNCTION_ARGUMENT;
+
+ //Ssl bypass
+ if (tag == CURLOPT_SSL_VERIFYPEER)
+ {
+ result = CurlSetOpt_(data, tag, 0);
+ }
+
+ //Disable Proxy
+ if (tag == CURLOPT_PROXY)
+ {
+ result = CurlSetOpt_(data, tag, "");
+ }
+
+ //URL redirection
+ else if (tag == CURLOPT_URL)
+ {
+ std::string url = va_arg(arg, char*);
+ gUrl = url;
+
+ if (url.find("ClientQuest") != std::string::npos) isReady = !isReady;
+
+ Uri uri = Uri::Parse(url);
+
+ std::cout << "URL: " << uri.Host.data() << '\n';
+
+#ifdef URL_HOST
+
+ if (!ProdMode)
+ {
+ if (uri.Host.ends_with(XOR("ol.epicgames.com"))
+ || uri.Host.ends_with(XOR(".akamaized.net"))
+ || uri.Host.ends_with(XOR("on.epicgames.com"))
+ || uri.Host.ends_with(XOR("game-social.epicgames.com"))
+ || uri.Host.contains(XOR("superawesome.com")))
+ {
+ //printf("LogURL: %s\n", url.c_str());
+ url = Uri::CreateUri(URL_PROTOCOL, URL_HOST, URL_PORT, uri.Path, uri.QueryString);
+ }
+ }
+
+#endif
+ result = CurlSetOpt_(data, tag, url.c_str());
+ }
+
+ //Version determination
+ else if (tag == CURLOPT_HTTPHEADER && !bIsVersionFound)
+ {
+ auto list = va_arg(arg, curl_slist*);;
+
+ while (list->next != nullptr && list->data)
+ {
+ std::string listData = list->data;
+ if (listData.starts_with(XOR("User-Agent:")))
+ {
+ const auto version = listData.erase(0, listData.find_first_of("0123456789")); //find first number
+ gVersion = std::stof(version);
+ bIsVersionFound = !bIsVersionFound;
+ }
+ list = list->next;
+ }
+ }
+
+ else
+ {
+ result = CurlSetOpt(data, tag, arg);
+ }
+
+ va_end(arg);
+ return result;
+}
diff --git a/vendor/cURL/curlver.h b/vendor/cURL/curlver.h
new file mode 100644
index 0000000..f3cc1ea
--- /dev/null
+++ b/vendor/cURL/curlver.h
@@ -0,0 +1,77 @@
+#ifndef __CURL_CURLVER_H
+#define __CURL_CURLVER_H
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2017, Daniel Stenberg, , et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+/* This header file contains nothing but libcurl version info, generated by
+ a script at release-time. This was made its own header file in 7.11.2 */
+
+/* This is the global package copyright */
+#define LIBCURL_COPYRIGHT "1996 - 2017 Daniel Stenberg, ."
+
+/* This is the version number of the libcurl package from which this header
+ file origins: */
+#define LIBCURL_VERSION "7.55.1"
+
+/* The numeric version number is also available "in parts" by using these
+ defines: */
+#define LIBCURL_VERSION_MAJOR 7
+#define LIBCURL_VERSION_MINOR 55
+#define LIBCURL_VERSION_PATCH 1
+
+/* This is the numeric version of the libcurl version number, meant for easier
+ parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
+ always follow this syntax:
+
+ 0xXXYYZZ
+
+ Where XX, YY and ZZ are the main version, release and patch numbers in
+ hexadecimal (using 8 bits each). All three numbers are always represented
+ using two digits. 1.2 would appear as "0x010200" while version 9.11.7
+ appears as "0x090b07".
+
+ This 6-digit (24 bits) hexadecimal number does not show pre-release number,
+ and it is always a greater number in a more recent release. It makes
+ comparisons with greater than and less than work.
+
+ Note: This define is the full hex number and _does not_ use the
+ CURL_VERSION_BITS() macro since curl's own configure script greps for it
+ and needs it to contain the full number.
+*/
+#define LIBCURL_VERSION_NUM 0x073701
+
+/*
+ * This is the date and time when the full source package was created. The
+ * timestamp is not stored in git, as the timestamp is properly set in the
+ * tarballs by the maketgz script.
+ *
+ * The format of the date follows this template:
+ *
+ * "2007-11-23"
+ */
+#define LIBCURL_TIMESTAMP "2017-08-14"
+
+#define CURL_VERSION_BITS(x,y,z) ((x)<<16|(y)<<8|z)
+#define CURL_AT_LEAST_VERSION(x,y,z) \
+ (LIBCURL_VERSION_NUM >= CURL_VERSION_BITS(x, y, z))
+
+#endif /* __CURL_CURLVER_H */
diff --git a/vendor/cURL/system.h b/vendor/cURL/system.h
new file mode 100644
index 0000000..6f3629c
--- /dev/null
+++ b/vendor/cURL/system.h
@@ -0,0 +1,547 @@
+#ifndef __CURL_SYSTEM_H
+#define __CURL_SYSTEM_H
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2017, Daniel Stenberg, , et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+/*
+ * Try to keep one section per platform, compiler and architecture, otherwise,
+ * if an existing section is reused for a different one and later on the
+ * original is adjusted, probably the piggybacking one can be adversely
+ * changed.
+ *
+ * In order to differentiate between platforms/compilers/architectures use
+ * only compiler built in predefined preprocessor symbols.
+ *
+ * curl_off_t
+ * ----------
+ *
+ * For any given platform/compiler curl_off_t must be typedef'ed to a 64-bit
+ * wide signed integral data type. The width of this data type must remain
+ * constant and independent of any possible large file support settings.
+ *
+ * As an exception to the above, curl_off_t shall be typedef'ed to a 32-bit
+ * wide signed integral data type if there is no 64-bit type.
+ *
+ * As a general rule, curl_off_t shall not be mapped to off_t. This rule shall
+ * only be violated if off_t is the only 64-bit data type available and the
+ * size of off_t is independent of large file support settings. Keep your
+ * build on the safe side avoiding an off_t gating. If you have a 64-bit
+ * off_t then take for sure that another 64-bit data type exists, dig deeper
+ * and you will find it.
+ *
+ */
+
+#if defined(__DJGPP__) || defined(__GO32__)
+# if defined(__DJGPP__) && (__DJGPP__ > 1)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__SALFORDC__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__BORLANDC__)
+# if (__BORLANDC__ < 0x520)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T i64
+# define CURL_SUFFIX_CURL_OFF_TU ui64
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__TURBOC__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__WATCOMC__)
+# if defined(__386__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T i64
+# define CURL_SUFFIX_CURL_OFF_TU ui64
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__POCC__)
+# if (__POCC__ < 280)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# elif defined(_MSC_VER)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T i64
+# define CURL_SUFFIX_CURL_OFF_TU ui64
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__LCC__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__SYMBIAN32__)
+# if defined(__EABI__) /* Treat all ARM compilers equally */
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(__CW32__)
+# pragma longlong on
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(__VC32__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__MWERKS__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(_WIN32_WCE)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T i64
+# define CURL_SUFFIX_CURL_OFF_TU ui64
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__MINGW32__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_WS2TCPIP_H 1
+
+#elif defined(__VMS)
+# if defined(__VAX)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__OS400__)
+# if defined(__ILEC400__)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+# endif
+
+#elif defined(__MVS__)
+# if defined(__IBMC__) || defined(__IBMCPP__)
+# if defined(_ILP32)
+# define CURL_SIZEOF_LONG 4
+# elif defined(_LP64)
+# define CURL_SIZEOF_LONG 8
+# endif
+# if defined(_LONG_LONG)
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(_LP64)
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# else
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+# endif
+
+#elif defined(__370__)
+# if defined(__IBMC__) || defined(__IBMCPP__)
+# if defined(_ILP32)
+# define CURL_SIZEOF_LONG 4
+# elif defined(_LP64)
+# define CURL_SIZEOF_LONG 8
+# endif
+# if defined(_LONG_LONG)
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(_LP64)
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# else
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+# endif
+
+#elif defined(TPF)
+# define CURL_SIZEOF_LONG 8
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+#elif defined(__TINYC__) /* also known as tcc */
+
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+
+#elif defined(__SUNPRO_C) /* Oracle Solaris Studio */
+# if !defined(__LP64) && (defined(__ILP32) || \
+ defined(__i386) || defined(__sparcv8))
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(__LP64) || \
+ defined(__amd64) || defined(__sparcv9)
+# define CURL_SIZEOF_LONG 8
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+
+/* ===================================== */
+/* KEEP MSVC THE PENULTIMATE ENTRY */
+/* ===================================== */
+
+#elif defined(_MSC_VER)
+# if (_MSC_VER >= 900) && (_INTEGRAL_MAX_BITS >= 64)
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T __int64
+# define CURL_FORMAT_CURL_OFF_T "I64d"
+# define CURL_FORMAT_CURL_OFF_TU "I64u"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T i64
+# define CURL_SUFFIX_CURL_OFF_TU ui64
+# else
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+
+/* ===================================== */
+/* KEEP GENERIC GCC THE LAST ENTRY */
+/* ===================================== */
+
+#elif defined(__GNUC__)
+# if !defined(__LP64__) && (defined(__ILP32__) || \
+ defined(__i386__) || defined(__powerpc__) || defined(__arm__) || \
+ defined(__sparc__) || defined(__mips__) || defined(__sh__) || \
+ defined(__XTENSA__) || (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 4))
+# define CURL_SIZEOF_LONG 4
+# define CURL_TYPEOF_CURL_OFF_T long long
+# define CURL_FORMAT_CURL_OFF_T "lld"
+# define CURL_FORMAT_CURL_OFF_TU "llu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T LL
+# define CURL_SUFFIX_CURL_OFF_TU ULL
+# elif defined(__LP64__) || \
+ defined(__x86_64__) || defined(__ppc64__) || defined(__sparc64__) || \
+ (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 8)
+# define CURL_SIZEOF_LONG 8
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SIZEOF_CURL_OFF_T 8
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# endif
+# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_PULL_SYS_TYPES_H 1
+# define CURL_PULL_SYS_SOCKET_H 1
+
+#else
+/* generic "safe guess" on old 32 bit style */
+# define CURL_SIZEOF_LONG 4
+# define CURL_SIZEOF_CURL_SOCKLEN_T 4
+# define CURL_SIZEOF_CURL_OFF_T 4
+# define CURL_TYPEOF_CURL_OFF_T long
+# define CURL_FORMAT_CURL_OFF_T "ld"
+# define CURL_FORMAT_CURL_OFF_TU "lu"
+# define CURL_SUFFIX_CURL_OFF_T L
+# define CURL_SUFFIX_CURL_OFF_TU UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+#endif
+
+/* CURL_PULL_WS2TCPIP_H is defined above when inclusion of header file */
+/* ws2tcpip.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_WS2TCPIP_H
+# include
+# include
+# include
+#endif
+
+/* CURL_PULL_SYS_TYPES_H is defined above when inclusion of header file */
+/* sys/types.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_SYS_TYPES_H
+# include
+#endif
+
+/* CURL_PULL_SYS_SOCKET_H is defined above when inclusion of header file */
+/* sys/socket.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_SYS_SOCKET_H
+# include
+#endif
+
+/* Data type definition of curl_socklen_t. */
+#ifdef CURL_TYPEOF_CURL_SOCKLEN_T
+typedef CURL_TYPEOF_CURL_SOCKLEN_T curl_socklen_t;
+#endif
+
+/* Data type definition of curl_off_t. */
+
+#ifdef CURL_TYPEOF_CURL_OFF_T
+typedef CURL_TYPEOF_CURL_OFF_T curl_off_t;
+#endif
+
+/*
+ * CURL_ISOCPP and CURL_OFF_T_C definitions are done here in order to allow
+ * these to be visible and exported by the external libcurl interface API,
+ * while also making them visible to the library internals, simply including
+ * curl_setup.h, without actually needing to include curl.h internally.
+ * If some day this section would grow big enough, all this should be moved
+ * to its own header file.
+ */
+
+/*
+ * Figure out if we can use the ## preprocessor operator, which is supported
+ * by ISO/ANSI C and C++. Some compilers support it without setting __STDC__
+ * or __cplusplus so we need to carefully check for them too.
+ */
+
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
+ defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__) || \
+ defined(__POCC__) || defined(__SALFORDC__) || defined(__HIGHC__) || \
+ defined(__ILEC400__)
+/* This compiler is believed to have an ISO compatible preprocessor */
+#define CURL_ISOCPP
+#else
+ /* This compiler is believed NOT to have an ISO compatible preprocessor */
+#undef CURL_ISOCPP
+#endif
+
+/*
+ * Macros for minimum-width signed and unsigned curl_off_t integer constants.
+ */
+
+#if defined(__BORLANDC__) && (__BORLANDC__ == 0x0551)
+# define __CURL_OFF_T_C_HLPR2(x) x
+# define __CURL_OFF_T_C_HLPR1(x) __CURL_OFF_T_C_HLPR2(x)
+# define CURL_OFF_T_C(Val) __CURL_OFF_T_C_HLPR1(Val) ## \
+ __CURL_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_T)
+# define CURL_OFF_TU_C(Val) __CURL_OFF_T_C_HLPR1(Val) ## \
+ __CURL_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_TU)
+#else
+# ifdef CURL_ISOCPP
+# define __CURL_OFF_T_C_HLPR2(Val,Suffix) Val ## Suffix
+# else
+# define __CURL_OFF_T_C_HLPR2(Val,Suffix) Val/**/Suffix
+# endif
+# define __CURL_OFF_T_C_HLPR1(Val,Suffix) __CURL_OFF_T_C_HLPR2(Val,Suffix)
+# define CURL_OFF_T_C(Val) __CURL_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_T)
+# define CURL_OFF_TU_C(Val) __CURL_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_TU)
+#endif
+
+#endif /* __CURL_SYSTEM_H */