Compare commits

..
1 Commits
Author SHA1 Message Date
nobody 2c2381e666 This commit was manufactured by cvs2svn to create tag 'MCS_0_26'.
svn path=/tags/MCS_0_26/mcs/; revision=17313
2003-08-13 20:59:43 +00:00
5461 changed files with 138271 additions and 500954 deletions

No files matched your search

-3
View File
@@ -17,6 +17,3 @@ stamp-h
stamp-h.in
mono.pc
mono.spec
autom4te.cache
mint.pc
stamp-h1
-328
View File
@@ -1,331 +1,3 @@
2004-03-16 Duncan Mak <[email protected]>
* runtime/Makefile.am
(MakeCert.exe, cert2spc.exe, certmgr.exe, setreg.exe):
Remember to install them to mono/runtime.
2004-03-14 Zoltan Varga <[email protected]>
* configure.in: Enable JIT on sparc.
2004-03-13 Martin Willemoes Hansen <[email protected]>
* data/config.in: Changed libgtkhtml-3.0.so.2 to libgtkhtml-3.0.so to fix
breakage with gtkhtml-3.0.10
2004-03-10 Zoltan Varga <[email protected]>
* configure.in acconfig.h: Add a --with-sigaltstack option for platforms
where the sigaltstack based exception handling does not work.
2004-03-08 Zoltan Varga <[email protected]>
* configure.in acconfig.h: Add check for aintl function, which is the
solaris equivalent of truncl.
2004-02-29 Zoltan Varga <[email protected]>
* configure.in: Add check for GC_enable.
* configure.in: Remove amd64/Makefile from AC_OUTPUT to fix build.
2004-02-19 Zoltan Varga <[email protected]>
* configure.in: Add proper support for --with-nptl for people who
have linking problems when it is enabled.
2004-02-18 Zoltan Varga <[email protected]>
* configure.in: Add test for __thread keyword and shared libs.
2004-02-16 Zoltan Varga <[email protected]>
* configure.in: Enable --with-nptl by default.
2004-02-03 Zoltan Varga <[email protected]>
* configure.in: Applied patch from Adrian Bunk ([email protected]). Fix
message for failed gethostbyname2_r check.
Fri Jan 23 16:07:05 EST 2004 Paolo Molaro <[email protected]>
* configure.in, acconfig.h: check for truncl. Disable
version script on MacOSX (see bug #51590 if a check becomes
necessary).
Fri Jan 23 21:26:01 CET 2004 Paolo Molaro <[email protected]>
* configure.in, acconfig.h: added check for socklen_t.
2004-01-22 Zoltan Varga <[email protected]>
* Makefile.am: Do not install mono.pc on platforms without a JIT.
2004-01-21 Zoltan Varga <[email protected]>
* Makefile.am (remove-binaries): Get rid of non-portable >& construct.
2003-12-29 Miguel de Icaza <[email protected]>
* scripts/sn.in: Add sn script.
2004-01-15 Zoltan Varga <[email protected]>
* scripts/Makefile.am: Add al.exe.
* scripts/al.in: New file.
* runtime/Makefile.am: Add al.exe.
2004-01-10 Jackson Harper <[email protected]>
* data/machine.config: Add trace handler (Trace.axd) add trace
configuration handlers.
2004-01-06 Martin Willemoes Hansen <[email protected]>
* doc/books: Added books on Web Services and ASP.NET
2004-01-04 Daniel Morgan <[email protected]>
* monowiz.win32.nsi: update the NSIS installer script for windows
to support NSIS 2.0 rc1 and Mono 0.29
2003-12-22 Bernie Solomon <[email protected]>
* configure.in: missed in my last change
* samples/embed/testi.c: interpreter embedding example
* docs/embedded-api: add info on interpreter embedding
Mon Dec 22 18:27:14 CET 2003 Paolo Molaro <[email protected]>
* configure.in, acconfig.h: use mach semaphores on darwin.
2003-12-22 Bernie Solomon <[email protected]>
* Makefile.am: Create mint.pc
mint.pc.in: Added for embedding the interpreter
2003-12-16 Martin Baulig <[email protected]>
* Makefile.am: In a Makefile.am, comments are started with `#' and
not with `dnl' - I must have been an idiot ...
2003-12-10 Todd Berman <[email protected]>
* configure.in: adding libicu url to the ICU: no message.
2003-12-05 John Luke <[email protected]>
* data/config.in: new dll mapping entry for libgstreamer
2003-12-02 Atsushi Enomoto <[email protected]>
* README: tiny fix ;-)
2003-11-26 Zoltan Varga <[email protected]>
* configure.in: Add -fno-strict-aliasing to CFLAGS.
* configure.in: Applied patch from [email protected]. Avoid linking in
librt if not neccesary.
2003-11-24 Zoltan Varga <[email protected]>
* configure.in: Fix signbit check. Fixes #51315.
2003-11-20 Jackson Harper <[email protected]>
* data/machine.config: Add OutputCacheModule
2003-11-19 Jackson Harper <[email protected]>
* doc/web/team.xml: New email address and job description
* doc/web/team/jackson.png: Picture of me debugging...seems appropriate
2003-11-14 Jackson Harper <[email protected]>
* Makefile.am: delete mscorlib.dll
2003-11-12 Jackson Harper <[email protected]>
* Makefile.am: corlib is now named mscorlib.dll
2003-11-12 Zoltan Varga <[email protected]>
* configure.in acconfig.h: Add check for signbit, which is missing in
FreeBSD 4.x.
2003-11-07 Zoltan Varga <[email protected]>
* configure.in: Remove debugging junk accidently checked in.
* configure.in: Add new --with-nptl option to enable NPTL only
features since auto-detection is not reliable.
* autogen.sh: Fix previous patch and silence noisy GNU which.
2003-11-07 Bernie Solomon <[email protected]>
* autogen.sh: tweak glibtool check so it works
if which doesn't set return code properly
2003-11-07 Zoltan Varga <[email protected]>
* autogen.sh: Silence noisy GNU which.
* autogen.sh: Applied patch from Peter Teichman ([email protected]).
Use 'glibtool' instead of 'libtool' on OSX.
2003-11-06 Zoltan Varga <zovarga@ws-zovarga2>
* mono/benchmark/pinvoke.cs: New benchmark for testing the performance
of the managed/unmanaged boundary.
2003-11-06 Zoltan Varga <[email protected]>
* configure.in acconfig.h: Add check for __thread keyword in gcc.
2003-10-29 Dick Porter <[email protected]>
* man/mono.1: Document MONO_EXTERNAL_ENCODINGS variable
2003-10-16 Miguel de Icaza <[email protected]>
* man/mono.1: Document new --trace options
2003-10-13 Bernie Solomon <[email protected]>
* configure.in: add hppa support (64bit only)
make solaris build work with Forte compiler
2003-10-13 Zoltan Varga <[email protected]>
* configure.in: Added check for pthread_attr_setstacksize.
* mono/tests/ChangeLog: New file.
2003-10-13 Zoltan Varga <[email protected]>
* mono/tests/Makefile.am: Link the tests with the test driver program
used for the mini tests.
2003-10-10 Zoltan Varga <[email protected]>
* mono/tests/libtest.c (mono_test_marshal_delegate): Added test for
stdcall calling convention.
2003-10-09 Dick Porter <[email protected]>
* acconfig.h:
* configure.in: Check for ICU availability
2003-10-09 Bernie Solomon <[email protected]>
* mono/tests/libtest.c: fix after merge of pinvoke2.cs
2003-10-07 Bernie Solomon <[email protected]>
* mono/tests/Makefile.am mono/tests/libtest.c
mono/tests/pinvoke18.cs: new test for bool marshalling.
2003-10-07 Bernie Solomon <[email protected]>
* mono/scripts/Makefile.am mono/scripts/*.in: fix
managed .exe paths so they are found under cygwin.
2003-10-07 Zoltan Varga <[email protected]>
* mono/tests/pinvoke2.cs mono/tests/libtest.c: Fix array of structs
test.
2003-10-06 Bernie Solomon <[email protected]>
* mono/tests/pinvoke2.cs mono/tests/pinvoke11.cs
mono/tests/libtest.c: Add more pass by value struct
tests for platforms with more complex calling conventions
(Sparc V9, HPPA 64 bit).
2003-10-06 Zoltan Varga <[email protected]>
* mono/tests/pinvoke2.cs mono/tests/libtest.c: Add array of structs
marshalling test.
2003-10-04 Bernie Solomon <[email protected]>
* mono/tests/libtest.c: remove warnings except
"no previous prototype"
2003-10-03 Bernie Solomon <[email protected]>
* mono/tests/libtest.c: (test_lpwstr_marshal) remove undefined
behaviour of increment, (mono_test_marshal_char) = should be ==
2003-09-30 Zoltan Varga <[email protected]>
* mono/tests/remoting1.cs: Added test for interface casts on
TransparentProxies.
2003-09-24 Bernie Solomon <[email protected]>
* mono/tests/pinvoke*.cs, delegate4.cs, marshal10.cs, marshal4.cs
marshal5.cs: remove .so from DllImport of libtest to aid portability.
2003-09-08 Zoltan Varga <[email protected]>
* configure.in: Added check for valgrind headers.
2003-09-03 Zoltan Varga <[email protected]>
* Makefile.am: Use $(MAKE) in even more places. Patch by Bernie Solomon
([email protected]).
2003-08-27 Zoltan Varga <[email protected]>
* Makefile.am: Use $(MAKE) instead of make. Patch by Bernie Solomon
([email protected]).
2003-08-25 Zoltan Varga <[email protected]>
* mono.pc.in: Added gthread-2.0.
2003-08-22 Zoltan Varga <[email protected]>
* configure.in: Added gthread-2.0 to GLIB_CFLAGS and GLIB_LIBS, so we
can call g_thread_init ().
2003-08-21 Zoltan Varga <[email protected]>
* mono/tests/threadpool.cs mono/tests/threadpool1.cs: Make increments
of static variables atomic. Fixes bug #47683.
2003-08-21 Johannes Roith <[email protected]>
* mono/Makefile.am: small update. make sure, glib makes it in the build, add optional target for dependencies
2003-08-18 Johannes Roith <[email protected]>
* mono/Makefile.am: add windows build option
* mono/monowiz.win32.nsi: add windows build script
* mono/mono-win32-light.bmp: add bitmap
2003-08-16 Zoltan Varga <[email protected]>
* mono/tests/checked.cs: Added mul.ovf tests.
2003-08-15 Duncan Mak <[email protected]>
* doc/mysql: Change references to ByteFX.Data.MySQLClient to the
correct ByteFX.Data.MySqlClient (note the change in
capitalization). Thanks to Tom Wagner <[email protected]> for
spotting the error.
2003-08-15 Zoltan Varga <[email protected]>
* mono/tests/bug-47295.cs: Regression test for bug #47295.
2003-08-11 Duncan Mak <[email protected]>
* runtime/Makefile.am (assemblies_DATA): Add Mono.Cairo.dll.
+13 -44
View File
@@ -1,18 +1,14 @@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = @libgc_dir@ mono web docs runtime scripts man data samples support
SUBDIRS = @libgc_dir@ mono doc docs runtime scripts man data samples
# EXTRA_SUBDIRS = libgc
dnl EXTRA_SUBDIRS = libgc
EXTRA_DIST= mono.pc.in mono.spec.in mint.pc.in
EXTRA_DIST= mono.pc.in mono.spec.in
pkgconfigdir = $(libdir)/pkgconfig
if JIT_SUPPORTED
pkgconfig_DATA= mono.pc mint.pc
else
pkgconfig_DATA= mint.pc
endif
DISTCLEANFILES= mono.pc mint.pc
pkgconfig_DATA= mono.pc
DISTCLEANFILES= mono.pc
#
# The following target is used to compile and install
@@ -23,45 +19,18 @@ DISTCLEANFILES= mono.pc mint.pc
fullbuild: remove-binaries mcs-tree-safe-build xinstall-runtime mcs-rest install
mcs-tree-safe-build:
(cd ../mcs/jay; $(MAKE))
(cd ../mcs/mcs; $(MAKE) MCS=mcs BOOTSTRAP_MCS=mcs)
(cd ../mcs/class/corlib; $(MAKE) MCS=mcs BOOTSTRAP_MCS=mcs)
cp ../mcs/class/lib/mscorlib.dll runtime
(cd ../mcs/jay; make)
(cd ../mcs/mcs; make MCS=mcs)
(cd ../mcs/class/corlib; make MCS=mcs)
cp ../mcs/class/lib/corlib.dll runtime
cp ../mcs/mcs/mcs.exe runtime
xinstall-runtime:
if echo $(SUBDIRS) | grep "libgc " > /dev/null; then (cd libgc; $(MAKE) && $(MAKE) install); fi
(cd mono; $(MAKE) && $(MAKE) install)
(cd runtime; $(MAKE) install assemblies_DATA=mscorlib.dll monobins_DATA=mcs.exe)
if echo $(SUBDIRS) | grep "libgc " > /dev/null; then (cd libgc; make && make install); fi
(cd mono; make && make install)
mcs-rest:
(cd ../mcs/class; $(MAKE))
(cd ../mcs/class; make)
remove-binaries:
rm ../mcs/class/lib/mscorlib.dll ../mcs/mcs/mcs.exe runtime/*dll runtime/*.exe > /dev/null 2>&1; echo
win32getdeps:
wget http://www.go-mono.com/archive/pkgconfig-0.11-20020310.zip
wget http://www.go-mono.com/archive/glib-2.0.4-20020703.zip
wget http://www.go-mono.com/archive/glib-dev-2.0.4-20020703.zip
wget http://www.go-mono.com/archive/libiconv-1.7.zip
wget http://www.go-mono.com/archive/libiconv-dev-1.7.zip
wget http://www.go-mono.com/archive/libintl-0.10.40-20020101.zip
wget http://www.jroith.de/nsis4cygwin.zip
unzip -n -d / pkgconfig-0.11-20020310.zip
unzip -n -d / glib-2.0.4-20020703.zip
unzip -n -d / glib-dev-2.0.4-20020703.zip
unzip -n -d / libiconv-1.7.zip
unzip -n -d / libiconv-dev-1.7.zip
unzip -n -d / libintl-0.10.40-20020101.zip
unzip -n -d / nsis4cygwin.zip
win32setup:
cp /usr/lib/libglib-2.0-0.dll @prefix@/lib
cp /usr/lib/iconv.dll @prefix@/lib
cp /usr/lib/libgmodule-2.0-0.dll @prefix@/lib
cp /usr/lib/libgobject-2.0-0.dll @prefix@/lib
cp /usr/lib/libgthread-2.0-0.dll @prefix@/lib
cp /usr/lib/libintl-1.dll @prefix@/lib
makensis /DMILESTONE=@VERSION@ /DSOURCE_INSTALL_DIR=`cygpath -a -w @prefix@`\\* monowiz.win32.nsi
rm ../mcs/class/lib/corlib.dll ../mcs/mcs/mcs.exe runtime/*dll runtime/*.exe >& /dev/null; echo
+3 -100
View File
@@ -8,36 +8,6 @@ This is Mono.
1. Compilation and Installation
===============================
a. Build Requirements
---------------------
To build Mono, you will need the following components:
* pkg-config
Available from: http://www.freedesktop.org/Software/pkgconfig
* glib 2.0
Available from: http://www.gtk.org/
Optional dependencies:
* ICU library
http://oss.software.ibm.com/icu/index.html
You will need this one to get complete support for the international
features of the .NET Framework.
* Cairo and libgdiplus
If you want to get support for System.Drawing, you will need to get
both Libgdiplus and Cairo.
b. Building the Software
------------------------
If you obtained this package as an officially released tarball,
this is very simple, use configure and make:
@@ -45,60 +15,12 @@ This is Mono.
make
make install
Mono supports a JIT engine on x86, SPARC and PowerPC systems.
The various commands that ship with Mono default to the JIT engine
on x86 and SPARC, to turn it on for PPC systems, use the --with-jit=yes
command line option to configure.
MacOS X Users: you will need to download the latest Boehm GC
Alpha release for garbage collection to work properly.
If you obtained this as a snapshot, you will need an existing
Mono installation. To upgrade your installation, unpack both
mono and mcs:
Mono installation. To upgrade your installation do:
tar xzf mcs-XXXX.tar.gz
tar xzf mono-XXXX.tar.gz
cd mono-XXXX
./autogen.sh --prefix=/usr/local
./autogen --prefix=/usr/local
make fullbuild
c. Upgrade from CVS
-------------------
If you are upgrading from CVS you will need an existing Mono installation.
First verify that you have a working installation:
echo 'class X { static void Main () { System.Console.Write("OK");}}' > x.cs
Compile:
mcs x.cs
And run:
mono x.exe
If you get the output `OK' and no errors, you are ready to start your CVS upgrade.
First, make sure that you have up-to-date mcs and mono sources:
cvs co mono mcs
Then, go into the mono directory, and configure:
cd mono
./autogen.sh --prefix=/usr/local
Then compile using the special target `fullbuild':
make fullbuild
This step will compile and install at the same time.
Failure to follow these steps will result in a broken installation.
2. Using Mono
=============
@@ -125,13 +47,7 @@ This is Mono.
====================
doc/
Contains the web site contents.
docs/
Technical documents about the Mono runtime.
data/
Configuration files installed as part of the Mono runtime.
Contains documentation and the web site contents.
mono/
The core of the Mono Runtime.
@@ -162,17 +78,4 @@ This is Mono.
arch/
Architecture specific portions.
man/
Manual pages for the various Mono commands and programs.
scripts/
Scripts used to invoke Mono and the corresponding program.
runtime/
A directory holding a pre-compiled version of the Mono
runtime.
-9
View File
@@ -25,14 +25,5 @@
#undef PTHREAD_POINTER_ID
#undef HAVE_GC_H
#undef HAVE_GC_GCJ_MALLOC
#undef HAVE_GC_ENABLE
#undef WITH_BUNDLE
#undef HAVE_GETHOSTBYNAME2_R
#undef HAVE_ICU
#undef HAVE_KW_THREAD
#undef HAVE_SIGNBIT
#undef USE_MACH_SEMA
#undef HAVE_SOCKLEN_T
#undef HAVE_TRUNCL
#undef HAVE_AINTL
#undef HAVE_WORKING_SIGALTSTACK
+2 -9
View File
@@ -30,15 +30,8 @@ fi
DIE=1
}
if [ -z "$LIBTOOL" ]; then
LIBTOOL=`which glibtool 2>/dev/null`
if [ ! -x "$LIBTOOL" ]; then
LIBTOOL=`which libtool`
fi
fi
(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && {
($LIBTOOL --version) < /dev/null > /dev/null 2>&1 || {
(libtool --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`libtool' installed to compile Mono."
echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.2d.tar.gz"
@@ -98,7 +91,7 @@ esac
if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then
if test -z "$NO_LIBTOOLIZE" ; then
echo "Running libtoolize..."
${LIBTOOL}ize --force --copy
libtoolize --force --copy
fi
fi
+17 -125
View File
@@ -1,13 +1,15 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* config.h.in. Generated automatically from configure.in by autoheader 2.13. */
/* Define if you have the ANSI C header files. */
#undef STDC_HEADERS
#undef HAVE_INET_PTON
#undef HAVE_INET_ATON
#undef HAVE_MSG_NOSIGNAL
#undef HAVE_SOL_IP
#undef HAVE_SOL_TCP
#undef HAVE_SOL_IPV6
#undef HAVE_IP_PKTINFO
#undef HAVE_STRUCT_IP_MREQN
#undef HAVE_STRUCT_IP_MREQ
#undef HAVE_PTHREAD
#undef HAVE_PTHREAD_MUTEX_TIMEDLOCK
#undef USE_MONO_MUTEX
#undef HAVE_LARGE_FILE_SUPPORT
@@ -16,144 +18,34 @@
#undef NAME_DEV_RANDOM
#undef HAVE_CRYPT_RNG
#undef HAVE_BOEHM_GC
#undef USE_INCLUDED_LIBGC
#undef DISABLE_SHARED_HANDLES
#undef HAVE_TIMEZONE
#undef HAVE_TM_GMTOFF
#undef MONO_SIZEOF_SUNPATH
#undef MONO_ZERO_ARRAY_LENGTH
#undef NEED_LINK_UNLINK
#undef PTHREAD_POINTER_ID
#undef HAVE_GC_H
#undef HAVE_GC_GCJ_MALLOC
#undef HAVE_GC_ENABLE
#undef WITH_BUNDLE
#undef HAVE_GETHOSTBYNAME2_R
#undef HAVE_ICU
#undef HAVE_KW_THREAD
#undef HAVE_SIGNBIT
#undef USE_MACH_SEMA
#undef HAVE_SOCKLEN_T
#undef HAVE_TRUNCL
#undef HAVE_AINTL
#undef HAVE_WORKING_SIGALTSTACK
/* Define to 1 if you have the <aio.h> header file. */
#undef HAVE_AIO_H
/* The number of bytes in a void *. */
#undef SIZEOF_VOID_P
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <elf.h> header file. */
#undef HAVE_ELF_H
/* Define to 1 if you have the `finite' function. */
#undef HAVE_FINITE
/* Define to 1 if you have the <gc/gc.h> header file. */
#undef HAVE_GC_GC_H
/* Define to 1 if you have the <gc.h> header file. */
#undef HAVE_GC_H
/* Define to 1 if you have the `inet_aton' function. */
/* Define if you have the inet_aton function. */
#undef HAVE_INET_ATON
/* Define to 1 if you have the `inet_pton' function. */
/* Define if you have the inet_pton function. */
#undef HAVE_INET_PTON
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the `isfinite' function. */
#undef HAVE_ISFINITE
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the <netdb.h> header file. */
/* Define if you have the <netdb.h> header file. */
#undef HAVE_NETDB_H
/* Define to 1 if you have the `poll' function. */
#undef HAVE_POLL
/* Define to 1 if you have the `pthread_attr_setstacksize' function. */
#undef HAVE_PTHREAD_ATTR_SETSTACKSIZE
/* Define to 1 if you have the <pthread.h> header file. */
#undef HAVE_PTHREAD_H
/* Define to 1 if you have the `pthread_mutex_timedlock' function. */
#undef HAVE_PTHREAD_MUTEX_TIMEDLOCK
/* Define to 1 if you have the <semaphore.h> header file. */
#undef HAVE_SEMAPHORE_H
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the <sys/filio.h> header file. */
/* Define if you have the <sys/filio.h> header file. */
#undef HAVE_SYS_FILIO_H
/* Define to 1 if you have the <sys/sockio.h> header file. */
/* Define if you have the <sys/sockio.h> header file. */
#undef HAVE_SYS_SOCKIO_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <sys/un.h> header file. */
#undef HAVE_SYS_UN_H
/* Define to 1 if you have the `truncl' function. */
#undef HAVE_TRUNCL
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the <utime.h> header file. */
/* Define if you have the <utime.h> header file. */
#undef HAVE_UTIME_H
/* Define to 1 if you have the <valgrind/memcheck.h> header file. */
#undef HAVE_VALGRIND_MEMCHECK_H
/* Define to 1 if you have the <wchar.h> header file. */
#undef HAVE_WCHAR_H
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* The size of a `void *', as computed by sizeof. */
#undef SIZEOF_VOID_P
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
+11 -231
View File
@@ -1,7 +1,7 @@
AC_INIT(README)
AC_CANONICAL_SYSTEM
AM_CONFIG_HEADER(config.h)
AM_INIT_AUTOMAKE(mono,0.31)
AM_INIT_AUTOMAKE(mono,0.26)
AM_MAINTAINER_MODE
dnl
@@ -27,9 +27,6 @@ libmono_ldflags=""
AC_SUBST(libmono_cflags)
AC_SUBST(libmono_ldflags)
dnl if linker handles the version script
no_version_script=no
# Thread configuration inspired by sleepycat's db
AC_MSG_CHECKING([host platform characteristics])
libgc_threads=no
@@ -77,9 +74,7 @@ case "$host" in
;;
*-*-hpux*)
platform_win32=no
CPPFLAGS="$CPPFLAGS -DGC_HPUX_THREADS -D_HPUX_SOURCE -D_XOPEN_SOURCE_EXTENDED -D_REENTRANT"
CFLAGS="$CFLAGS +ESdbgasm"
LDFLAGS="$LDFLAGS -z"
CPPFLAGS="$CPPFLAGS -DGC_HPUX_THREADS -D_HPUX_SOURCE -D_XOPEN_SOURCE_EXTENDED -D_REENTRANT"
libmono_cflags="-D_REENTRANT"
libmono_ldflags="-lpthread"
libgc_threads=pthreads
@@ -100,8 +95,6 @@ case "$host" in
libmono_ldflags="-pthread"
AC_DEFINE(NEED_LINK_UNLINK)
AC_DEFINE(PTHREAD_POINTER_ID)
AC_DEFINE(USE_MACH_SEMA)
no_version_script=yes
libdl=
libgc_threads=no
gc_default=none
@@ -114,7 +107,6 @@ case "$host" in
esac
AC_MSG_RESULT(ok)
AM_CONDITIONAL(PLATFORM_WIN32, test x$platform_win32 = xyes)
AM_CONDITIONAL(NO_VERSION_SCRIPT, test x$no_version_script = xyes)
AC_CHECK_TOOL(CC, gcc, gcc)
AC_PROG_CC
@@ -153,9 +145,6 @@ AM_PROG_LIBTOOL
AC_CHECK_HEADERS(sys/filio.h sys/sockio.h netdb.h utime.h semaphore.h sys/un.h)
# for mono/mini/tramp-x86.c
AC_CHECK_HEADERS(valgrind/memcheck.h)
# for mono/metadata/debug-symfile.c
AC_CHECK_HEADERS(elf.h)
@@ -168,18 +157,8 @@ AC_CHECK_SIZEOF(void *, 4)
WARN=''
if test x"$GCC" = xyes; then
WARN='-Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-cast-qual -Wcast-align -Wwrite-strings'
# The runtime code does not respect ANSI C strict aliasing rules
CFLAGS="$CFLAGS -fno-strict-aliasing"
else
# The Sun Forte compiler complains about inline functions that access static variables
# so disable all inlining.
case "$host" in
*-*-solaris*)
CFLAGS="$CFLAGS -Dinline="
;;
esac
fi
CFLAGS="$CFLAGS -g $WARN"
CFLAGS="-g $WARN"
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
if test "x$PKG_CONFIG" = "xno"; then
@@ -188,8 +167,8 @@ fi
dnl for use on the build system
dnl pkg-config is stupid
BUILD_GLIB_CFLAGS=`$PKG_CONFIG --cflags glib-2.0 gthread-2.0`
BUILD_GLIB_LIBS=`$PKG_CONFIG --libs glib-2.0 gthread-2.0`
BUILD_GLIB_CFLAGS=`$PKG_CONFIG --cflags glib-2.0`
BUILD_GLIB_LIBS=`$PKG_CONFIG --libs glib-2.0`
AC_SUBST(BUILD_GLIB_CFLAGS)
AC_SUBST(BUILD_GLIB_LIBS)
@@ -211,8 +190,8 @@ GLIB_REQUIRED_VERSION=1.3.11
PKG_CHECK_MODULES(BASE_DEPENDENCIES, glib-2.0 >= $GLIB_REQUIRED_VERSION)
GLIB_CFLAGS=`$PKG_CONFIG --cflags glib-2.0 gthread-2.0`
GLIB_LIBS=`$PKG_CONFIG --libs glib-2.0 gthread-2.0`
GLIB_CFLAGS=`$PKG_CONFIG --cflags glib-2.0`
GLIB_LIBS=`$PKG_CONFIG --libs glib-2.0`
GMODULE_CFLAGS=`$PKG_CONFIG --cflags gmodule-2.0`
GMODULE_LIBS=`$PKG_CONFIG --libs gmodule-2.0`
@@ -223,19 +202,6 @@ AC_SUBST(GMODULE_LIBS)
AC_ARG_WITH(gc, [ --with-gc=boehm,included,none],[gc=$with_gc],[gc=$gc_default])
# Enable support for NPTL only features like fast thread-local storage
# We can't reliably detect nptl at compile & run time
# so this option will stay until nptl becomes more widespread
AC_ARG_WITH(nptl, [ --with-nptl=yes,no enable/disable support for NPTL],[],[with_nptl=yes])
# Enable support for using sigaltstack for SIGSEGV and stack overflow handling
# This does not work on some platforms (bug #55253)
AC_ARG_WITH(sigaltstack, [ --with-sigaltstack=yes,no enable/disable support for sigaltstack],[],[with_sigaltstack=yes])
if test x$with_sigaltstack = "xyes"; then
AC_DEFINE(HAVE_WORKING_SIGALTSTACK)
fi
# assembly bundle support, see metadata/make-bundle.pl for more info
AC_ARG_WITH(bundle, [ --with-bundle=bundle_template],[
BUNDLE_FILE=$with_bundle
@@ -268,10 +234,6 @@ case "x$gc" in
if test "x$found_gcj_malloc" = "xyes"; then
AC_DEFINE(HAVE_GC_GCJ_MALLOC)
fi
AC_CHECK_LIB(gc, GC_enable, found_gc_enable="yes",,$libdl)
if test "x$found_gc_enable" = "xyes"; then
AC_DEFINE(HAVE_GC_ENABLE)
fi
;;
xincluded)
@@ -293,7 +255,6 @@ case "x$gc" in
# The included libgc contains GCJ support
AC_DEFINE(HAVE_GC_GCJ_MALLOC)
AC_DEFINE(HAVE_GC_ENABLE)
;;
xnone)
@@ -482,8 +443,6 @@ if test x$platform_win32 = xno; then
# Yes, we have it...
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_GETHOSTBYNAME2_R)
], [
AC_MSG_RESULT(no)
])
dnl *****************************
@@ -560,7 +519,6 @@ if test x$platform_win32 = xno; then
dnl *** Checks for libpthread ***
dnl *****************************
AC_CHECK_LIB(pthread, main, LIBS="$LIBS -lpthread")
AC_CHECK_HEADERS(pthread.h)
AC_CHECK_FUNCS(pthread_mutex_timedlock)
AC_MSG_CHECKING(for PTHREAD_MUTEX_RECURSIVE)
AC_TRY_COMPILE([ #include <pthread.h>], [
@@ -573,59 +531,11 @@ if test x$platform_win32 = xno; then
AC_MSG_WARN(Using mono_mutex_t for recursive mutexes)
AC_DEFINE(USE_MONO_MUTEX)
])
AC_CHECK_FUNCS(pthread_attr_setstacksize)
dnl ***********************************
dnl *** Checks for working __thread ***
dnl ***********************************
AC_MSG_CHECKING(for working __thread)
AC_TRY_RUN([
#include <pthread.h>
__thread int i;
static int res1, res2;
void thread_main (void *arg)
{
i = arg;
sleep (1);
if (arg == 1)
res1 = (i == arg);
else
res2 = (i == arg);
}
int main () {
pthread_t t1, t2;
i = 5;
pthread_create (&t1, NULL, thread_main, 1);
pthread_create (&t2, NULL, thread_main, 2);
pthread_join (t1, NULL);
pthread_join (t2, NULL);
return !(res1 + res2 == 2);
}
], [
if test "x$with_nptl" != "xyes"; then
AC_MSG_RESULT(disabled)
else
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_KW_THREAD)
fi
], [
AC_MSG_RESULT(no)
])
dnl ********************************
dnl *** Checks for semaphore lib ***
dnl ********************************
# 'Real Time' functions on Solaris
# posix4 on Solaris 2.6
# pthread (first!) on Linux
AC_SEARCH_LIBS(sem_init, pthread rt posix4)
AC_CHECK_LIB(rt, sem_init, LIBS="$LIBS -lrt")
dnl ********************************
dnl *** Checks for timezone stuff **
@@ -653,79 +563,16 @@ if test x$platform_win32 = xno; then
fi
fi
dnl *********************************
dnl *** Checks for math functions ***
dnl *********************************
LIBS="$LIBS -lm";
AC_CHECK_FUNCS(finite, , AC_MSG_CHECKING(for finite in math.h)
AC_TRY_LINK([#include <math.h>],
[ finite(0.0); ],
AC_DEFINE(HAVE_FINITE) AC_MSG_RESULT(yes),
AC_MSG_RESULT(no)))
AC_CHECK_FUNCS(isfinite, , AC_MSG_CHECKING(for isfinite in math.h)
AC_TRY_LINK([#include <math.h>],
[ isfinite(0.0); ],
AC_DEFINE(HAVE_ISFINITE) AC_MSG_RESULT(yes),
AC_MSG_RESULT(no)))
dnl ****************************************************************
dnl *** Checks for working poll() (macosx defines it but doesn't ***
dnl *** have it in the library (duh)) ***
dnl ****************************************************************
AC_CHECK_FUNCS(poll)
dnl *************************
dnl *** Check for signbit ***
dnl *************************
AC_MSG_CHECKING(for signbit)
AC_TRY_LINK([#include <math.h>], [
int s = signbit(1.0);
], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_SIGNBIT)
], [
AC_MSG_RESULT(no)
])
dnl *********************
dnl *** Check for AIO ***
dnl *********************
AC_CHECK_HEADERS(aio.h)
AC_CHECK_LIB(rt, aio_read, [ LIBS="$LIBS -lrt" ],)
else
AC_CHECK_LIB(ws2_32, main, LIBS="$LIBS -lws2_32", AC_ERROR(bad mingw install?))
AC_CHECK_LIB(psapi, main, LIBS="$LIBS -lpsapi", AC_ERROR(bad mingw install?))
fi
dnl socklen_t check
AC_MSG_CHECKING(for socklen_t)
AC_TRY_COMPILE([
#include <sys/types.h>
#include <sys/socket.h>
],[
socklen_t foo;
],[
ac_cv_c_socklen_t=yes
AC_DEFINE(HAVE_SOCKLEN_T)
AC_MSG_RESULT(yes)
],[
AC_MSG_RESULT(no)
])
AC_CHECK_FUNCS(truncl, , AC_MSG_CHECKING(for truncl in math.h)
AC_TRY_LINK([#include <math.h>],
[ truncl(0.0); ],
[
AC_DEFINE(HAVE_TRUNCL)
AC_MSG_RESULT(yes)
ac_cv_truncl=yes
],
AC_MSG_RESULT(no)))
if test "x$ac_cv_truncl" != "xyes"; then
AC_CHECK_LIB(sunmath, aintl, [ AC_DEFINE(HAVE_AINTL) LIBS="$LIBS -lsunmath"])
fi
dnl ****************************
dnl *** Look for /dev/random ***
dnl ****************************
@@ -799,29 +646,12 @@ if test "x$try_shared_handles" != "xyes"; then
AC_SUBST(DISABLE_SHARED_HANDLES)
fi
ICU_CFLAGS=""
ICU_LIBS=""
enable_icu=no
AC_PATH_PROG(ICU_CONFIG, icu-config, no)
if test "x$ICU_CONFIG" = "xno" -o ! -x "$ICU_CONFIG"; then
AC_MSG_WARN([Only invariant locale available; install ICU for I18N support])
enable_icu="no, if you want full i18n support download it from: http://oss.software.ibm.com/icu/index.html"
else
enable_icu="yes. Version: `$ICU_CONFIG --version`"
AC_DEFINE(HAVE_ICU)
ICU_CFLAGS=`$ICU_CONFIG --cppflags`
ICU_LIBS=`$ICU_CONFIG --ldflags`
fi
AC_SUBST(ICU_CFLAGS)
AC_SUBST(ICU_LIBS)
TARGET="unknown"
ACCESS_UNALIGNED="yes"
JIT_SUPPORTED=no
LIBC="libc.so.6"
jit_wanted=false
case "$host" in
# mips-sgi-irix5.* | mips-sgi-irix6.*)
# TARGET=MIPS;
@@ -831,19 +661,11 @@ case "$host" in
TARGET=X86;
arch_target=x86;
JIT_SUPPORTED=yes
jit_wanted=true
;;
x86_64-*-* | amd64-*-*)
TARGET=AMD64;
arch_target=x86-64;
JIT_SUPPORTED=no
;;
sparc*-*-*)
TARGET=SPARC;
arch_target=sparc;
JIT_SUPPORTED=yes
ACCESS_UNALIGNED="no"
jit_wanted=true
;;
# alpha*-*-linux* | alpha*-*-osf*)
# TARGET=ALPHA;
@@ -862,11 +684,6 @@ case "$host" in
# m68k-*-linux*)
# TARGET=M68K
# ;;
hppa2.0w-hp-hpux11.00 | hppa64-hp-hpux11.00)
TARGET=HPPA;
arch_target=hppa;
ACCESS_UNALIGNED="no"
;;
macppc-*-openbsd* | powerpc-*-linux* | powerpc-*-openbsd* | \
powerpc-*-sysv* | powerpc-*-darwin*)
TARGET=POWERPC;
@@ -885,33 +702,6 @@ case "$host" in
;;
esac
AC_ARG_WITH(jit, [ --with-jit=yes,no If you want to build scripts that default to the JIT],[
jit_wanted=true
])
USEJIT=false
if test x$JIT_SUPPORTED = xyes; then
if $jit_wanted; then
USEJIT=true
jit_status="Building and using the JIT"
else
jit_status="Building the JIT, defaulting to the interpreter"
fi
else
jit_status="interpreter"
fi
AM_CONDITIONAL(USE_JIT, test x$USEJIT = xtrue)
libsuffix=".so"
case "$host" in
powerpc-*-darwin*)
libsuffix=".dylib"
;;
esac
AC_SUBST(libsuffix)
if test ${TARGET} = ARM; then
dnl ******************************************
dnl *** Check to see what FPU is available ***
@@ -944,14 +734,12 @@ AM_CONDITIONAL(MIPS_GCC, test ${TARGET}${ac_cv_prog_gcc} = MIPSyes)
AM_CONDITIONAL(MIPS_SGI, test ${TARGET}${ac_cv_prog_gcc} = MIPSno)
AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
AM_CONDITIONAL(X86, test x$TARGET = xX86)
AM_CONDITIONAL(AMD64, test x$TARGET = xAMD64)
AM_CONDITIONAL(ALPHA, test x$TARGET = xALPHA)
AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
AM_CONDITIONAL(ARM, test x$TARGET = xARM)
AM_CONDITIONAL(S390, test x$TARGET = xS390)
AM_CONDITIONAL(HPPA, test x$TARGET = xHPPA)
AM_CONDITIONAL(JIT_SUPPORTED, test x$JIT_SUPPORTED = xyes)
@@ -964,7 +752,6 @@ AC_SUBST(LDFLAGS)
AC_OUTPUT([
Makefile
mint.pc
mono.pc
mono/Makefile
mono/utils/Makefile
@@ -976,8 +763,6 @@ mono/os/Makefile
mono/os/win32/Makefile
mono/os/unix/Makefile
mono/arch/x86/Makefile
mono/arch/amd64/Makefile
mono/arch/hppa/Makefile
mono/arch/ppc/Makefile
mono/arch/sparc/Makefile
mono/arch/s390/Makefile
@@ -996,21 +781,16 @@ mono/profiler/Makefile
runtime/Makefile
scripts/Makefile
man/Makefile
web/Makefile
doc/Makefile
docs/Makefile
data/Makefile
samples/Makefile
support/Makefile
data/config
mono.spec
])
echo "
GC: $gc
ICU: $enable_icu
NPTL: $with_nptl
SIGALTSTACK: $with_sigaltstack
Engine: $jit_status
GC: $gc
"
-5
View File
@@ -1,5 +0,0 @@
Makefile.in
Makefile
config
.cvsignore
browscap.ini
File diff suppressed because it is too large. Load diff
+2 -11
View File
@@ -1,15 +1,6 @@
monodir = $(sysconfdir)/mono
EXTRA_DIST = config.in \
machine.config \
DefaultWsdlHelpGenerator.aspx \
browscap.ini.gz
EXTRA_DIST = config.in machine.config
mono_DATA = config \
machine.config \
DefaultWsdlHelpGenerator.aspx \
browscap.ini
browscap.ini: browscap.ini.gz
gunzip -c $^ > $@
mono_DATA = config machine.config
Binary file not shown.
+1 -4
View File
@@ -6,7 +6,6 @@
<dllmap dll="odbc32.dll" target="libodbc.so" />
<dllmap dll="libglib-2.0-0.dll" target="libglib-2.0.so" />
<dllmap dll="libgobject-2.0-0.dll" target="libgobject-2.0.so" />
<dllmap dll="libgthread-2.0-0.dll" target="libgthread-2.0.so" />
<dllmap dll="libpango-1.0-0.dll" target="libpango-1.0.so" />
<dllmap dll="libatk-1.0-0.dll" target="libatk-1.0.so" />
<dllmap dll="libgdk-win32-2.0-0.dll" target="libgdk-x11-2.0.so" />
@@ -15,7 +14,5 @@
<dllmap dll="libgtk-win32-2.0-0.dll" target="libgtk-x11-2.0.so" />
<dllmap dll="libglade-2.0-0.dll" target="libglade-2.0.so" />
<dllmap dll="oci" target="clntsh" />
<dllmap dll="gtkhtml-3.0" target="libgtkhtml-3.0.so" />
<dllmap dll="db2cli" target="libdb2_36.so"/>
<dllmap dll="gstreamer" target="libgstreamer-0.6.so" />
<dllmap dll="gtkhtml-3.0" target="libgtkhtml-3.0.so.2" />
</configuration>
+7 -84
View File
@@ -3,9 +3,9 @@
<configuration>
<configSections>
<section name="appSettings" type="System.Configuration.NameValueFileSectionHandler, System" />
<section name="appSettings" type="System.Configuration.NameValueFileSectionHandler, System" />
<section name="system.diagnostics" type="System.Diagnostics.DiagnosticsConfigurationHandler, System" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSectionHandler, System" allowLocation="false"/>
<sectionGroup name="system.web">
<section name="httpHandlers"
type="System.Web.Configuration.HttpHandlersSectionHandler, System.Web" />
@@ -21,20 +21,8 @@
type="System.Web.Configuration.GlobalizationConfigurationHandler, System.Web" />
<section name="sessionState"
type="System.Web.SessionState.SessionStateSectionHandler, System.Web" />
<section name="trace"
type="System.Web.Configuration.TraceConfigurationHandler, System.Web" />
<section name="webServices"
type="System.Web.Services.Configuration.WebServicesConfigurationSectionHandler, System.Web.Services" />
<section name="webControls"
type="System.Web.Configuration.WebControlsSectionHandler, System.Web" />
<section name="compilation"
type="System.Web.Configuration.CompilationConfigurationHandler, System.Web" />
<section name="httpRuntime"
type="System.Web.Configuration.HttpRuntimeConfigurationHandler, System.Web" />
<section name="customErrors"
type="System.Web.Configuration.CustomErrorsConfigHandler, System.Web" />
<section name="pages"
type="System.Web.Configuration.PagesConfigurationHandler, System.Web" />
</sectionGroup>
<sectionGroup name="system.net">
<section name="settings"
@@ -48,7 +36,7 @@
<section name="webRequestModules"
type="System.Net.Configuration.WebRequestModuleHandler, System" />
</sectionGroup>
<section name="system.drawing" type="System.Configuration.NameValueSectionHandler" />
<section name="system.drawing" type="System.Configuration.NameValueSectionHandler" />
</configSections>
<system.net>
<connectionManagement>
@@ -56,8 +44,6 @@
</connectionManagement>
<authenticationModules>
<add type="System.Net.BasicClient" />
<add type="System.Net.DigestClient" />
<add type="System.Net.NtlmClient" />
</authenticationModules>
<defaultProxy>
<proxy />
@@ -75,18 +61,14 @@
</system.net>
<system.web>
<httpHandlers>
<add verb="*" path="Trace.axd" type="System.Web.Handlers.TraceHandler, System.Web" />
<add verb="*" path="*.aspx" type="System.Web.UI.PageHandlerFactory, System.Web" />
<add verb="*" path="*.asmx" validate="false"
type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services" />
<add verb="*" path="*.ashx" type="System.Web.UI.SimpleHandlerFactory, System.Web" />
<add verb="GET" path="WebResource.axd" type="System.Web.Handlers.AssemblyResourceLoader, System.Web" />
<add verb="*" path="*.asax" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.ascx" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.config" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.cs" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.rem" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting" validate="false" />
<add verb="*" path="*.soap" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting" validate="false" />
<add verb="GET,HEAD" path="*" type="System.Web.StaticFileHandler, System.Web" />
<add verb="*" path="*" type="System.Web.HttpMethodNotAllowedHandler, System.Web" />
</httpHandlers>
@@ -94,7 +76,6 @@
<add name="FormsAuthentication" type="System.Web.Security.FormsAuthenticationModule, System.Web" />
<add name="UrlAuthorization" type="System.Web.Security.UrlAuthorizationModule, System.Web" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web" />
<add name="OutputCache" type="System.Web.Caching.OutputCacheModule, System.Web" />
</httpModules>
<authentication mode="Forms">
<forms name=".MONOAUTH" loginUrl="login.aspx" protection="All" timeout="30" path="/">
@@ -104,10 +85,10 @@
</forms>
</authentication>
<machineKey validationKey="AutoGenerate" decryptionKey="AutoGenerate" validation="SHA1" />
<globalization requestEncoding="utf-8"
responseEncoding="utf-8"
fileEncoding="utf-8"/>
<!--
<!-- Sample globalization settings
<globalization requestEncoding="iso-8859-1"
responseEncoding="iso-8859-1"
fileEncoding="iso-8859-1"
culture="en-US"
uiculture="en-US" />
-->
@@ -121,66 +102,8 @@
</protocols>
<wsdlHelpGenerator href="DefaultWsdlHelpGenerator.aspx" />
</webServices>
<webControls clientScriptsLocation="/web_scripts" />
<compilation debug="false" defaultLanguage="c#">
<compilers>
<compiler language="cs;c#;csharp" extension=".cs" warningLevel="1" compilerOptions=""
type="Microsoft.CSharp.CSharpCodeProvider, System" />
<compiler language="vb;vbs;visualbasic;vbscript" extension=".vb"
warningLevel="1" compilerOptions=""
type="Microsoft.VisualBasic.VBCodeProvider, System" />
</compilers>
<assemblies>
<!--<add assembly="mscorlib" /> -->
<add assembly="System" />
<add assembly="System.Xml" />
<add assembly="System.Data" />
<add assembly="System.Web" />
<add assembly="System.Web.Services" />
<add assembly="System.Drawing" />
<add assembly="*" /> <!-- Add assemblies in bin directory -->
</assemblies>
</compilation>
<httpRuntime executionTimeout="90"
maxRequestLength="4096"
useFullyQualifiedRedirectUrl="false"
minFreeThreads="8"
minLocalRequestFreeThreads="4"
appRequestQueueLimit="100" />
<pages buffer="true"
enableSessionState="true"
autoEventWireup="true"
validateRequest="true" />
</system.web>
<system.runtime.remoting>
<application>
<channels>
<channel ref="http client" displayName="http client (delay loaded)" delayLoadAsClientChannel="true" />
<channel ref="tcp client" displayName="tcp client (delay loaded)" delayLoadAsClientChannel="true" />
</channels>
</application>
<channels>
<channel id="http" type="System.Runtime.Remoting.Channels.Http.HttpChannel, System.Runtime.Remoting" />
<channel id="http client" type="System.Runtime.Remoting.Channels.Http.HttpClientChannel, System.Runtime.Remoting" />
<channel id="http server" type="System.Runtime.Remoting.Channels.Http.HttpServerChannel, System.Runtime.Remoting" />
<channel id="tcp" type="System.Runtime.Remoting.Channels.Tcp.TcpChannel, System.Runtime.Remoting" />
<channel id="tcp client" type="System.Runtime.Remoting.Channels.Tcp.TcpClientChannel, System.Runtime.Remoting" />
<channel id="tcp server" type="System.Runtime.Remoting.Channels.Tcp.TcpServerChannel, System.Runtime.Remoting" />
</channels>
<channelSinkProviders>
<clientProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapClientFormatterSinkProvider, System.Runtime.Remoting" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryClientFormatterSinkProvider, System.Runtime.Remoting" />
</clientProviders>
<serverProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapServerFormatterSinkProvider, System.Runtime.Remoting" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryServerFormatterSinkProvider, System.Runtime.Remoting" />
<provider id="wsdl" type="System.Runtime.Remoting.MetadataServices.SdlChannelSinkProvider, System.Runtime.Remoting" />
</serverProviders>
</channelSinkProviders>
</system.runtime.remoting>
<appSettings>
<!--<add key="yourkey" value="your value" /> -->
<!--<remove key="a key defined higher in the hierarchy" /> -->
+4
View File
@@ -0,0 +1,4 @@
Makefile.in
Makefile
all-docs
pending-classes.in
+37
View File
@@ -0,0 +1,37 @@
WEB_FILES= \
ado-net anoncvs asp-net books ccvs c-sharp class-library contact contributing devel-faq documentation download \
embedded-api faq firebird gcc-frontend hackers ideas index \
java jit-debug languages mailing-lists monodoc-xml mysql odbc \
oledb papers \
passport plans porting postgresql ppc projects rationale \
resources roadmap runtime sqlclient sqlite sybase tdsclient \
tds-providers status testing thanks tools \
porting anoncvs monodoc-xml winforms
OTHERS= pending resources-pending todo mono-build.sh mono-build-w32.sh
EXTRA_DIST = $(WEB_FILES) README $(OTHERS)
all-docs: $(WEB_FILES)
cat rationale roadmap c-sharp tools class-library \
runtime documentation download faq contributing \
resources status > all-docs
class-status: class-status.in pending-classes Makefile.am
cat class-status.in pending-classes > class-status
pending-classes:
#pending-classes: pending-classes.in Makefile.am
# echo "This is a list of pending classes, and links to their documentation on MSDN.Microsoft.com<p><p>" > pending-classes
# for i in `cat pending-classes.in`; do x=`echo $$i | sed s/\\\.//g`; link=`echo http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrf@@@ClassTopic.asp | sed "s/@@@/$$x/"`; echo " <a href=\"$$link\">$$i</a><br>" >> pending-classes; done
webit: dummy
(cd web; make && make push)
push-notes:
scp release-notes/mono* www@www:/web/cvsmodules/mono/archive
dummy:
BIN
View File
Binary file not shown.

After

Width:  |  Height:  |  Size: 448 B

+47
View File
@@ -0,0 +1,47 @@
To edit the website appearance:
cd doc/web
edit template.html.in
make
To edit website content:
cd doc (this directory)
edit files carefully
cd web
make
To publish changes:
cd web
make push
############## Samples
If you want to add a new item in the left menu
you have to edit mono/doc/web/commands and add
the entry there.
For new files you can add something as:
level,entry,path_to_the_file,file.src
ex: 1,COBOL#,cobol.html,cobol.src
If you just want to add a link to the menu:
1,MyEntry,URL
ex: 1,About Linux,http://www.linux.org
To test the results under Linux:
1. Edit mono/doc/web/makefile
Delete all the references to class status
and the deploy/index.rss as well as the
mono.exe commands.
2. make
3. Open your browser and point to the
file:///(YOUR PATH HERE)mono/doc/web/deploy/index.html
+446
View File
@@ -0,0 +1,446 @@
* ADO.NET
<p>Mono's ADO.NET Developers:
<table border=1>
<tr>
<td><b>Developer</b></td>
<td><b>Email</b></td>
<td><b>Contribution</b></td>
</tr>
<tr>
<td>Rodrigo Moya</td>
<td>rodrigo -AT-<br> ximian.comNOSPAM</td>
<td>ADO.NET coordinator,<br> OLE DB provider,<br> and tests</td>
</tr>
<tr>
<td>Daniel Morgan</td>
<td>danmorg -AT-<br> sc.rr.comNOSPAM</td>
<td>MySQL, PostgreSQL, <br>Oracle providers,<br> and tests</td>
</tr>
<tr>
<td>Tim Coleman</td>
<td>tim -AT- <br>timcoleman.comNOSPAM</td>
<td>Microsoft SQL Server, <br>Sybase, <br>TDS providers,<br> Oracle,
<br>and tests.<br>
He has
contributed <br>to other parts <br>of Mono too, <br>such as,
<br>EnterpriseServices,
XML, <br>and WebServices.</td>
</tr>
<tr>
<td>Brian Ritchie</td>
<td>brianlritchie -AT-<br> hotmail.comNOSPAM</td>
<td>ODBC provider <br>and the ProviderFactory <br>in Mono.Data</td>
</tr>
<tr>
<td>Vladimir Vukicevic</td>
<td>vladimir -AT-<br> pobox.comNOSPAM</td>
<td>SQL Lite provider. <br> He has contributed to GTK# <br>and mPhoto too.</td>
</tr>
<tr>
<td>Christopher Bockner</td>
<td>cleared -AT-<br> rogers.comNOSPAM</td>
<td>IBM DB2 Universal <br>Database provider</td>
</tr>
<tr>
<td>Ville Palo</td>
<td>vi64pa -AT-<br> koti.soon.fiNOSPAM</td>
<td>XML stuff <br>in System.Data <br>including DataSet <br>
and XmlDataDocument, <br>and tests</td>
</tr>
<tr>
<td>Gonzalo Paniagua Javier</td>
<td>gonzalo -AT-<br> ximian.comNOSPAM</td>
<td>Integration between <br>System.Web and <br>System.Data</td>
</tr>
<tr>
<td>Gaurav Vaish</td>
<td>gvaish -AT-<br> iitk.ac.inNOSPAM</td>
<td>Web controls</td>
</tr>
<tr>
<td>Phillip Jerkins</td>
<td>Phillip.Jerkins -AT-<br> morgankeegan.comNOSPAM</td>
<td>Named Instance support <br>in System.Data.SqlClient</td>
</tr>
</table>
** Bugs and Feature Requests
<ul>
<li>Bugs with Mono or any data provider in Mono should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have a Bugzilla user account, it is free
and easy to create
one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
<li>Any RFE (Request For Enhancement) for features missing or new functionality
should be entered as a bug in Bugzilla too</li>
</ul>
** ADO.NET Data Providers
<p>List of ADO.NET Data Providers working in Mono:
<ul>
<li><a href="http://www.go-mono.com/ibmdb2.html">IBM DB2 Universal Database</a></li>
<li><a href="http://www.go-mono.com/mysql.html">MySQL</a></li>
<li><a href="http://www.go-mono.com/odbc.html">ODBC</a></li>
<li><a href="http://www.go-mono.com/oracle.html">Oracle</a></li>
<li><a href="http://www.go-mono.com/oledb.html">OLE DB</a></li>
<li><a href="http://www.go-mono.com/postgresql.html">PostgreSQL</a></li>
<li><a href="http://www.go-mono.com/sqlclient.html">Microsoft SQL Server</a></li>
<li><a href="http://www.go-mono.com/sqlite.html">SQL Lite</a></li>
<li><a href="http://www.go-mono.com/sybase.html">Sybase</a></li>
<li><a href="http://www.go-mono.com/tdsclient.html">TDS Generic</a></li>
</ul>
<p>Providers which we do not have, but we would like to have. Currently,
some of these databases are supported via the ODBC or OLE DB providers.
<ul>
<li><a href="http://msdn.microsoft.com/library/en-us/dnsql2k/html/sqlxml_intromanagedclasses.asp?frame=true">Managed Classes for SqlXml</a> which is
a .NET data provider for retrieving XML data from a Microsoft SQL Server 2000 database. The System.Data.SqlClient provider
in Mono can be used as a starting point at mcs/class/System.Data/System.Data.SqlClient.</li>
<li><a href="http://www.hughes.com.au/">miniSQL</a></li>
<li><a href="http://www.sleepycat.com/">BerkeleyDB (Sleepycat)</a></li>
<li><a href="http://www.sapdb.org/">SapDB</a></li>
<li><a href="http://www-3.ibm.com/software/data/informix/">Informix</a></li>
<li><a href="http://msdn.microsoft.com/vfoxpro/">Foxpro</a></li>
<li>Microsoft Access - could be done by creating C# bindings to <a href="http://mdbtools.sourceforge.net">MDB Tools</a></li>
<li>dbase or xbase type database files</li>
<li>Others are welcome</li>
</ul>
<p>External Projects that have created ADO.NET Providers that work on Mono:
<ul>
<li><a href="http://www.go-mono.com/firebird.html">Firebird Interbase</a></li> is a
Firebird SQL Managed data provider. It can be used with Interbase databases too. It
is written in 100%C# and does not require a client library. Works on .NET and Mono.</a>
<li><a href="http://gborg.postgresql.org/project/npgsql/projdisplay.php">Npgsql</a> is a
PostgreSQL Managed data provider written
in 100% C#, does not require a client library, and works on .NET and Mono</li>
<li><a href="http://sourceforge.net/projects/mysqlnet/">MySQLNet</a> is a
MySQL Managed data provider written in 100% C#, does not
require a client library, and works on .NET and Mono</li>
</ul>
** Tools
<p>Some tools that can be used for ADO.NET and other technologies (ASP.NET, XML, etc).
<ul>
<li><b>SQL# CLI</b> - a SQL query tool with a command-line interface.
It can be used to enter and execute SQL statements or
execute a batch of SQL commands from a file. It can
be used to test connection strings, connect to various ADO.NET
providers, save output to text, html, or xml. It is a work-in-progress.
The SQL# CLI is distributed with the
Mono runtime and class libraries as an executable assembly sqlsharp.exe.
The source to SQL# CLI can be found in the mcs source at
mcs/tools/SqlSharp/SqlSharpCli.cs
</li>
<li><p><b>SQL# GUI - a graphical SQL query tool</b> allows a user
to enter SQL commands in a top panel which is a text editor. It
has a toolbar and menu for various tasks, such as, executing
SQL commands one-at-a-time or in a batch. The results would appear
in a bottom panel in a grid or could be saved to a file (xml, html, csv).
Also, the bottom panel would allow logging of SQL command executed.
Currently, there is a <a href="http://go-mono.com/images/sqlsharp.png">SQL# For GTK#</a> which
provides a GUI interface using the <a href="http://gtk-sharp.sourceforge.net">Gtk#</a> toolkit. SQL# For GTK#
is a work-in-progress and can be found in the mcs source at
mcs/tools/SqlSharp/gui/gtk-sharp</li>
</ul>
<p>Tools we would like to have, but they have not been created yet:
<ul>
<li><b>XML Schema Definition tool</b> <a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cptools/html/cpconxmlschemadefinitiontoolxsdexe.asp">xsd.exe</a> needs
to be created. Maybe this TODO item should be at the System.XML web page instead.
<ul>
<li>This tool
would work like the xsd.exe tool included with
the .NET Framework. The Xsd.exe tools has the
following uses:
<ul>
<li><b>XDR to XSD</b> - used to generate an XML schema from an XDR (XML Data Reduced schema) file.
XDR was used by Microsoft prior to XSD becoming a W3C recommendation. So, this needs
to be supported for legacy reasons</li>
<li><b>XML to XSD</b> - used to generate an XML schema from an XML file</li>
<li><b>XSD to DataSet</b> - used to generate DataSet classes from an XSD schema file. The
DataSet classes created can then be used with XML data</li>
<li><b>XSD to Classes</b> - used to generate classes from an XSD schema file. The
classes created can be used with System.XML.Serialization.XMLSerializer
to read and write XML code that follows the schema</li>
<li><b>Classes to XSD</b> - used to generate an XML schema
from type(s) in a assembly file. The
XML schema created by the tool defines the XML format used
by System.XML.Serialization.XMLSerializer</li>
</ul>
<li>Xsd.exe is used to manipulate XML schemas that
follow the http://www.w3.org/XML/Schema">XML Schema Definition (XSD)</a> language
recommended by the <a href="http://w3.org/">World Wide Web Consortium (W3C)</a></li>
<li>How this tool could be created:
<ul>
<li>Write xsd.exe in C# and run on Mono</li>
<li>Make sure we have XML Schema support in System.Xml.Schema. Currently,
it is wrapped around libxlst</li>
<li>XML serialization support in System.Data classes</li>
<li>Create the TypedDataSetGenerator class in System.Data</li>
<li>Using CodeDOM or Reflection.Emit to create code</li>
<li>Make sure DataSet, XmlDataDocument, and related classes
are implemented fully</li>
</ul>
</li>
</li>
</ul>
</li>
<li><b>Application XML Configuration File Editor</b> - a tool
to create and edit an application configuration file, such as,
we have a .net application named Accouting.exe, the tool could edit
the application configuration file Accounting.exe.config so a user could
connect to the database used by the program. This tool has not
been created.</li>
<li><b>Configuration Command-Line and GUI Tools for ADO.NET</b>.
These tools have not been started. The tools would be written in
C# and run on Mono. The
configuration tool can be used to do the following:
<ul>
<li>bebased on the Application XML Configuration File Editor</li>
<li>setup DSNs for the ODBC and OLE-DB
providers and configurations for
their underlying libraries (unixODBC and libgda)</li>
<li>setup configurations for the Mono.Data.ProviderFactory
that Brian Ritchie created</li>
<li>setup native database client library configurations too, such as,
freetds.conf for Microsoft SQL Server and Sybase</li>
</ul>
</li>
</ul>
** Extra Classes in Mono ADO.NET
<p>An ADO.NET <a href="http://www.go-mono.com/provider-factory.html">Provider Factory</a>
was created by Brian Ritchie. The
Provider Factory is a way to dynamically create
connections, commands, parameters, and data adapters based on configuration
information.
** Current Status
<p>Various ADO.NET Providers have been created at various stages of
development including:
Firebird/Interbase, IBM DB2 Universal Database, MySQL, ODBC, OLE DB, Oracle,
PostgreSQL, SQL Lite, Sybase, Microsoft SQL Server, and TDS Generic.
See their respective web page for more information.
<p><b>Data Relations</b> via DataRelation, DataRelationCollection, and
other classes have not been implemented
<p><b>Constraints</b> need lots of work
<p><b>XML Schema Definition tool</b> xsd.exe that is included
in the .NET Framework has not been created for Mono
<p><b>TypeDataSetGenerator</b> needs to be stubbed and implemented.
<p><b>DataSet, DataAdaptor, DataTable, DataRelation, DataRow, DataColumn,
DataColumnCollection, DataRowCollection, and others</b> need more work. There are
many classes that are just stubs and need to be implemented. Ville Palo has been
doing much testing here.
<p><b>XML support in System.Data</b> needs work. This involves working on
the classes: DataSet, XmlDataDocument, and the method ExecuteXmlReader() that
exists in a provider's class that implements IDbCommand, and others.
Stuart Caborn has started the XML support in a DataSet. Tim Coleman started
XML support in the ExecuteXmlReader() in a SqlCommand. Ville Palo has been
heavily modifying DataSet, XmlDataDocument, and other classes for reading
and writing XML. XML Serialization support in DataSet needs to be implemented.
<p><b>Integration with ASP.NET</b> has been created. Data binding of
a DataTable in a DataSet to a System.Web.UI.WebControls.DataGrid works. Data binding
of other types works too.
<p><b>Database Access from ASP.NET</b>:
<ul>
<li>Take a look at xsp in cvs and look at the examples in test: dbpage1.aspx
and dbpage2.aspx:
<ul>
<li>Notice that the namespace System.Data is imported via <b>import</b></li>
<li>A NameValueCollection is gotten using ConfigurationSettings.AppSetings. These
settings are gotten from the file server.exe.config which is a XML file. The XML
file has a section appSettings. In the appSettings section, you have keys
for DBProviderAssembly, DBConnectionType, and DBConnectionString.
<ul>
<li><b>DBProviderAssembly</b> is the assembly of the ADO.NET provider.
For example:
"Mono.Data.PostgreSqlClient"</li>
<li><b>DBConnectionType</b> is the System.Type of the class that
implements System.Data.IDbConnection that is found
in the DBProviderAssembly.
For example:
"Mono.Data.PostgreSqlClient.PgConnection"</li>
<li><b>DBConnectionString</b> is the ConnectionString to set to the
IDbConnection object to use in opening a connection to a data source.
For Example:
"hostaddr=127.0.0.1;user=monotest;password=monotest;dbname=monotest"</li>
</ul>
<li>The function GetConnectionData() gets the database provider assembly, connection type,
and connection string parameters if they exist; otherwise, it uses default values. This is
done during the loading of the web page.</li>
<li>With the connection parameters, the assembly is loaded, the connection type is verified that
it implements IDbConnection and an instance of the class can be created, creates a instance
of the class, sets the connection string, and opens the connection.</li>
</ul>
</li>
</ul>
<p><b>Integration with Windows.Forms</b> has not been started, such as, data binding
to a System.Windows.Forms.DataGrid. This may involve implementing many classes
in System.Windows.Forms and System.Data.
<p><b>Integration with <a href="http://gtk-sharp.sourceforge.net/">GTK#</a></b>
has not been started, such as, data binding
to a GtkTreeView. This may involve creating new classes
to go between the glist data model and the ADO.NET data model.
Mike Kestner or Rachel Hestilov would be the best people to ask for help on GTK#.
<p><b>Integration with QT#</b> has not been started. Any information on
how this can be done is appreciated. Adam Treat would be the best
person to ask about QT#.
<p><b>Building System.Data</b>
<p>The System.Data.dll gets built with the rest of the class library.
To compile the System.Data.dll assembly separately, you need:
<b>On Unix</b>
<ul>
* update your mono sources. Be sure you have latest mcs.exe
and .dll's, since there have been many fixes needed for
compilation on Linux.
* compile System.Data.dll:
<pre>
cd mcs/class/System.Data<br>
mcs --target library -o \
System.Data.dll @list
</pre>
</ul>
<b>On Windows</b>
<ul>
* update your mono sources. Be sure you have latest mcs.exe
and .dll's. You can use the same method as Linux,
or you can use NAnt.
* To use NAnt:
<pre>
cd mcs/class/System.Data
../../nant/NAnt.exe
</pre>
* This will automatically copy the System.Data.dll to Test.
If you need to do a clean for the System.Data.dll assembly,<br><br>
<pre>
cd mcs/class/System.Data
../../nant/NAnt.exe clean
</pre>
</ul>
** Testing
<ul>
<li>Testing connection-oriented classes are done
via the provider specific tests
found in the mcs source at mcs/class</br>
<table border=1>
<tr>
<td><b>Name</b></td>
<td><b>Assembly /</br> Namespace</b></td>
<td><b>Test</b></td>
</tr>
<tr>
<td>Microsoft</br> SQL</br> Server</br></td>
<td>System.Data /</br> System.Data.SqlClient</td>
<td>SqlTest.cs at</br> System.Data/Test</td>
</tr>
<tr>
<td>PostgreSQL</br> (Mono)</td>
<td>Mono.Data.PostgreSqlClient /</br> Mono.Data.PostgreSqlClient</td>
<td>PostgresTest.cs at</br> System.Data/Test</td>
</tr>
<tr>
<td>MySQL</br> (Mono)</td>
<td>Mono.Data.MySql /</br> Mono.Data.MySql</td>
<td>MySqlTest.cs at</br> Mono.Data.MySql/Test</td>
</tr>
<tr>
<td>Oracle</br> (Mono)</td>
<td>System.Data.OracleClient /</br> System.Data.OracleClient</td>
<td>TestOracleClient.cs at</br> System.Data.OracleClient</td>
</tr>
<tr>
<td>ODBC</br> (Mono)</td>
<td>System.Data.OracleClient /</br> System.Data.OracleClient</td>
<td>TestOracleClient.cs at</br> System.Data.OracleClient</td>
</tr>
</table>
<li><a href="http://www.go-mono.com/testing.html">Testing non-connection classes</a> are
done via mono's modified version of NUnit.
<ul>
<li>To run all the NUnit tests for Mono, you need the mcs source. cd to the root
of the mcs source. To run it:
<ul>
<li>On Linux: make -f makefile test</li>
<li>On Windows: make test</li>
</ul>
</li>
<li>If you just want to run the NUnit tests for System.Data, you would cd into
the mcs source at class/System.Data/Test and run it:
<ul>
<li>On Linux: make -f makefile test</li>
<li>On Windows: make test</li>
</ul>
</li>
</ul>
</li>
</ul>
+70
View File
@@ -0,0 +1,70 @@
* Anonymous CVS access
Anonymous access to the Mono is available currently from three
servers (anoncvs-spain-1.go-mono.com,
anoncvs-spain-2.go-mono.com and anoncvs-us-1.go-mono.com).
You can also use `anoncvs.go-mono.com', and that will pick a
server automatically for you.
Sources are currently being updated every hour.
** Checking out the sources
To check out the sources for the first time from the
repository, use this command:
<pre>
export CVSROOT=:pserver:[email protected]:/mono
cvs login
cvs -z3 co mcs mono gtk-sharp
</pre>
That will get you the compiler and class libraries (mcs), the
interpreter and JITer (mono) and the Gtk# bindings.
The server is located in Spain.
** Updating the sources
To update your sources every day, you use this command:
<pre>
export CVSROOT=:pserver:[email protected]:/mono
cvs -z3 update -dP mcs mono gtk-sharp
</pre>
** Thanks
Thanks to <a href="http://www.hispalinux.es">HispaLinux</a>
for providing this Anon CVS server. The server is located in
Spain.
Special thanks to Jesus Climent, Rodrigo Moya, Juantomás
García and Ismael Olea for making this happen.
<a name="#mirror">
** Becoming an AnonCVS mirror
To become an AnonCVS mirror, you currently need about 40
megabytes of free disk space and bandwidth that you do not
mind sharing (you probably want enough to spare).
I need to be able to rsync to your machine from the main CVS
server. The preferred method to rsync is to setup ssh in your
machine.
The requirements are:
<ul>
* An account where we can ssh into.
* rsync.
* AnonCVS setup with the same paths as the rest of the
servers.
* Currently, about 40 megabytes of disk space, but this
will likely grow as the project evolves.
* A sysadmin contact e-mail address.
</ul>
Executable
+101
View File
@@ -0,0 +1,101 @@
* ASP.NET
ASP.NET support is divided in two pieces:
<ul>
* Web Forms (Web Applications infrastructure).
* Web Services (the SOAP-based rpc system).
</ul>
Both are functional at this point, and applications like
"IBuySpy" run with Mono.
ASP.NET works either embedded into
our XSP server test server or the mod_mono Apache module.
We are now working bug fixing and adding missing features
after making the whole pipeline compatible with MS.
Tim started work on the Web Services. Lluis is in charge of
it now and web services are now supported. He also added a web
service sample to the XSP server set of tests.
** Hosting
ASP.NET provides a hosting interface. Today we ship support
for two different hosting mechanisms:
<ul>
* <a href="#xsp">XSP</a>: A light-weight C# web server.
* <a href="#mod_mono">mod_mono</a>: An apache module
that can host the Mono runtime and the ASP.NET runtime
</ul>
<a name="xsp">
** XSP
XSP is a simple web server written in C# that can be used to
run your ASP.NET applications. The code is available from our
<a href="download.html">download page</a> or from the <a
href="anoncvs.html">Anonymous CVS</a> repository (module name:
xsp)/.
This is where initial development of the .aspx/.ascx/.asax
compiler to C# took place. That compiler is now integrated in
System.Web classes mostly under System.Web.Compilation
namespace. We added a new web server that works with mono and
MS runtime and is being used to debug our classes. It resides
in xsp/server.
A couple of classes of this new server can be reused/extended
to make an apache module/cgi using mono (MonoWorkerRequest and
MonoApplicationHost). This server also uses a couple of
plugins distributed with Mono to support gzip HTTP transfers.
There is also a set of .aspx pages to test the server along with
a few user controls under xsp/test.
You can check it out from CVS and run 'make install' to test it.
<a name="mod_mono">
* mod_mono
This Apache module available at <a
href="http://www.apacheworld.org/modmono/">ApacheWorld.org</a>
hosts the Mono runtime and the Mono's ASP.NET runtime, and
allows apache to server asp.net web pages.
Work is underway to improve it.
** Controls
A lot of work has been put in the various classes that
implement the controls (UI.HtmlControls and UI.WebControls),
but they have been coded mostly in the dark, and without being
able to test them in real life: Gaurav and Leen worked very
hard on this namespace.
We can now render all HtmlControls and all WebControls.
Help in making the controls better is appreciated.
** ASP.NET and free controls.
We want to encourage developers to create open source controls
that can be used both on Mono's ASP.NET and Microsoft's ASP.NET.
** How to Help
Testing and fixing HtmlControls, WebControls and validators is an
easy way to help.
In the CVS module XSP you can find a small web server used for
testing and a directory containing sample aspx pages.
You have some documentation under doc directory and in the README
file of each directory. They explain how to test our System.Web.
Testing is really easy!
As the server also works with MS runtime, you can use it to check
what the expected results are.
+53
View File
@@ -0,0 +1,53 @@
* Mono Books
<a href="http://www.amazon.de/exec/obidos/ASIN/3827264928/qid=1050051051/sr=2-1/ref=sr_2_3_1/028-2755135-1623712">
Mono: .NET-kompatible Anwendungen mit dem Open Source-Framework
</a>
* C# Books
A Programmer's Introduction to C# - Second Edition: Eric Gunnerson
* .NET Framework
Avery good techincal book about .NET is Don Box's <a
href="http://service.bfast.com/bfast/click?bfmid=2181&sourceid=39391960&isbn=0201734117">Essential
.NET</a>
* Remoting
<a href="http://www.dotnetremoting.cc/book/AdvancedDotNetRemoting.asp">
Advanced .NET Remoting: Ingo Rammer</a>
* Compiler Implementation
Compilers - Principles, Techniques, and Tools: Alfred V. Aho, Ravi Sethi,
Jeffrey D. Ullman
Advanced Compiler Design Implementation: Steven S. Muchnick
Modern Compiler Implementation in C: Andrew W. Appel
A Retargetable C Compiler - Design and Implementation: C. Fraser, David
Hanson
* Threading
.NET Multithreading: Alan L. Dennis (ISBN 1-930110-54-5)
* Reference Manuals
<a
href="http://developer.intel.com/design/pentium/manuals/24319101.pdf">Intel
Architecture Software Developer's Manual, Volume 2 - Instruction Set Reference Manual</a>
<a
href="http://www.caldera.com/developers/devspecs/abi386-4.pdf">System V ABI
- i386 Architecture Processor Supplement</a>
<a
href="http://www.caldera.com/developers/devspecs/mipsabi.pdf">System V ABI -
MIPS Processor supplement</a>
<a href="http://www.sparc.org/standards/V8.pdf">The SPARC Architecture
Manual Version 8</a>
+209
View File
@@ -0,0 +1,209 @@
* MCS: The Ximian C# compiler
The Mono C# compiler is considered feature complete at this
point and relatively mature. MCS is able to compile itself
and many more C# programs (there is a test suite included that
you can use). It is routinely used to compile Mono, roughly
half a million lines of C# code.
* Pending tasks
There are a few known bugs in the Mono C# compiler, but
they are very very few at this point,
you can also browse the MCS <a href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FMCS&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">bugs</a> from Bugzilla.
A test suite is maintained to track the progress of
the compiler and various programs are routinely compiled and
ran.
** Slides
Slides for the Mono C# Compiler presentation at .NET ONE are
available <a
href="http://primates.ximian.com/~miguel/slides-europe-nov-2002/Mono_C_Sharp_Overview_1007.sxi">here</a>
in StarOffice format.
** Obtaining MCS
The Mono C# compiler is part of the `mcs' module in the Mono CVS
you can get it from our <a href="anoncvs.html">Anonymous CVS</a> server,
or you can get nightly <a href="download.html">download page</a>.
** Running MCS
MCS is written in C# and uses heavily the .NET APIs. MCS runs
on Linux with the Mono runtime and on Windows with both the
.NET runtime and the Mono runtime.
** Reporting Bugs in MCS
When you report a bug, try to provide a small test case that would
show the error so we can include this as part of the Mono C# regression
test suite.
If the bug is an error or a warning that we do not flag, write
a sample program called `csXXXX.cs' where XXXX is the code number
that is used by the Microsoft C# compiler that illustrates the
problem. That way we can also do regression tests on the invalid
input.
** Phases of the compiler
The compiler has a number of phases:
<ul>
* Lexical analyzer: hand-coded lexical analyzer that
provides tokens to the parser.
* The Parser: the parser is implemented using Jay (A
Berkeley Yacc port to Java, that I ported to C#).
The parser does minimal work and syntax checking,
and only constructs a parsed tree.
Each language element gets its own class. The code
convention is to use an uppercase name for the
language element. So a C# class and its associated
information is kept in a "Class" class, a "struct"
in a "Struct" class and so on. Statements derive
from the "Statement" class, and Expressions from the
Expr class.
* Parent class resolution: before the actual code
generation, we need to resolve the parents and
interfaces for interface, classe and struct
definitions.
* Semantic analysis: since C# can not resolve in a
top-down pass what identifiers actually mean, we
have to postpone this decision until the above steps
are finished.
* Code generation: The code generation is done through
the System.Reflection.Emit API.
</ul>
** CIL Optimizations.
The compiler performs a number of simple optimizations on its input:
constant folding (this is required by the C# language spec) and
can perform dead code elimination.
Other more interesting optimizations like hoisting are not possible
at this point since the compiler output at this point does not
generate an intermediate representation that is suitable to
perform basic block computation.
Adding an intermediate layer to enable the basic block
computation to the compiler should be a simple task, but we
are considering having a generic CIL optimizer. Since all the
information that is required to perform basic block-based
optimizations is available at the CIL level, we might just skip
this step altogether and have just a generic IL optimizer that
would perform hoisting on arbitrary CIL programs, not only
those produced by MCS.
If this tool is further expanded to perform constant folding
(not needed for our C# compiler, as it is already in there)
and dead code elimination, other compiler authors might be
able to use this generic CIL optimizer in their projects
reducing their time to develop a production compiler.
** History
MCS was able to parse itself on April 2001, MCS compiled itself
for the first time on December 28 2001. MCS became self hosting
on January 3rd, 2002.
The Mono Runtime and the Mono execution engine were able to make
our compiler self hosting on March 12, 2002.
** Questions and Answers
Q: Why not write a C# front-end for GCC?
A: I wanted to learn about C#, and this was an exercise in this
task. The resulting compiler is highly object-oriented, which has
lead to a very nice, easy to follow and simple implementation of
the compiler.
I found that the design of this compiler is very similar to
Guavac's implementation.
Targeting the CIL/MSIL byte codes would require to re-architecting
GCC, as GCC is mostly designed to be used for register machines.
The GCC Java engine that generates Java byte codes cheats: it does
not use the GCC backend; it has a special backend just for Java, so
you can not really generate Java bytecodes from the other languages
supported by GCC.
Q: If your C# compiler is written in C#, how do you plan on getting
this working on a non-Microsoft environment.
We will do this through an implementation of the CLI Virtual
Execution System for Unix (our JIT engine).
Our JIT engine is working for the purposes of using the compiler.
The supporting class libraries are being worked on to fully support
the compiler.
Q: Do you use Bison?
A: No, currently I am using Jay which is a port of Berkeley Yacc to
Java that I later ported to C#. This means that error recovery is
not as nice as I would like to, and for some reason error
productions are not being caught.
In the future I want to port one of the Bison/Java ports to C# for
the parser.
Q: Should someone work on a GCC front-end to C#?
A: I would love if someone does, and we would love to help anyone that
takes on that task, but we do not have the time or expertise to
build a C# compiler with the GCC engine. I find it a lot more fun
personally to work on C# on a C# compiler, which has an intrinsic
beauty.
We can provide help and assistance to anyone who would like to work
on this task.
Q: Should someone make a GCC backend that will generate CIL images?
A: I would love to see a backend to GCC that generates CIL images. It
would provide a ton of free compilers that would generate CIL
code. This is something that people would want to look into
anyways for Windows interoperation in the future.
Again, we would love to provide help and assistance to anyone
interested in working in such a project.
Q: What about making a front-end to GCC that takes CIL images and
generates native code?
A: I would love to see this, specially since GCC supports this same
feature for Java Byte Codes. You could use the metadata library
from Mono to read the byte codes (ie, this would be your
"front-end") and generate the trees that get passed to the
optimizer.
Ideally our implementation of the CLI will be available as a shared
library that could be linked with your application as its runtime
support.
Again, we would love to provide help and assistance to anyone
interested in working in such a project.
Q: But would this work around the GPL in the GCC compiler and allow
people to work on non-free front-ends?
A: People can already do this by targeting the JVM byte codes (there
are about 130 compilers for various languages that target the JVM).
Q: Why are you writing a JIT engine instead of a front-end to GCC?
A: The JIT engine and runtime engine will be able to execute CIL
executables generated on Windows.
You might also want to look at the <a href="faq.html#gcc">GCC</a>
section on the main FAQ
+286
View File
@@ -0,0 +1,286 @@
* CVS Access
Here we describe how one obtains commit access to the CVS repository
and the responsibilities that come with that access privilege.
** What is CVS?
Briefly, CVS is a system tool used to store and maintain files and
a history of their changes over time. The Mono source code and related
files are kept on a CVS server at Ximian.
** What Access?
We mean "commit" access. This is the privilege to make permanent
changes to the Mono source code and related files. You need an account
created by the CVS server administrator in order to commit changes to
the files on that server.
** How Does One Obtain Access?
Any active Mono developer can get a CVS account. Normally one is
considered an 'active' developer after sending several patches to the
mailing lists and/or bugzilla for review.
If you are not a developer, but want to access the latest sources,
please see the <a href="anoncvs.html">AnonCVS</a> instructions.
If you feel you are ready for a CVS account send an e-mail to
<a href="mailto:[email protected]">miguel</a> with your public OpenSSH
key for this purpose. Please specify if the key was generated with SSH
version 1 or version 2. Detailed instructions are below.
* Policies
It is necessary that everyone with CVS commit access respect and
adhere to the following rules. If you ask for and are granted CVS
access, you are agreeing to follow these policies.
** Code License
If you are about to commit code to a module, the code that is
being committed should be released under the same license as
the code that the module has.
Check the license if you are unsure, but it is basically:
class libraries X11; compiler and tools: GPL; runtime: LGPL.
If in doubt, check with the maintainers of the module, or send
mail to [email protected].
** Changing code
Even if you have CVS commit access, that doesn't mean you can change
code at will in any directory or module. Directories and Namespaces
have a sort of unofficial ownership. If you are not the owner of a
piece of code and you want to make changes/fixes to it, there are two
cases.
1) The change is a typo fix or a one-liner build or trivial fix. In
this case almost anyone can commit (always remembering to add the
proper changelog entry to explain the change). We say "almost anyone",
because changes to certain directories almost always should be reviewed
first. Such as changes to core stuff: corlib/System, System.Collections,
mini/, metadata/, System.IO.
2) The change is larger. In this case the patch *must* be sent to
mono-devel-list for review by the owner of the code and by the other
hackers. Always submit such patches to the list or bugzilla, although
you may put the owner of the code in the CC header. Hackers come and go.
Mailing a patch to only a personal address is a good way to get the
patch forgotten and missed. Plus, getting the patches reviewed as well
as reviewing them, is a good thing, so try to get used to it.
Note: If the patch is an addition of code and doesn't change any of the
existing code, the rules are slightly relaxed: there is more freedom
in committing such changes, if they don't interfere with the existing
codebase.
** Owning Code
Now, how do you get to be the owner of a chunk of code? The answer is
simple. You wrote the code, so you're the unofficial owner. There is
also another way. After sending a few patches for the code, the
owner (or the core developers of mono, if the owner somehow disappeared)
trusts you and tells you you're free to commit without getting his
review first.
Here is a (partial) list of namespaces/directories with their owners:
<ul>
<li>Debugger module and debug code in mono: martin
<li>mcs compiler: miguel, martin, ravi
<li>Reflection/Reflection.Emit: lupus, zoltan
<li>IO-layer: dick
<li>mini: lupus, dietmar
<li>test suite: nickd (though anyone should feel free to add test cases)
<li>System.IO: dick, ville
<li>security stuff: spouliot
<li>ilasm: jackson
<li>System.Web and related: gonzalo
<li>System.Xml: eno, piers
<li>Remoting: dietmar, lluis
<li>interop/marshal: dietmar
<li>threads: dick
</ul>
If you are the owner of a piece of code, feel free to commit code, and
delegate the work to others.
But, if you're not the owner of the code, committing a rewrite without
getting a review first is not good cvsitizenship (especially when the
rewrite claimed to fix bugs, but not a single regression test has been
added to the suite).
** Commit Rules
Once you know you can commit a patch (because of the rules above) there
are a few other small rules to follow:
<ul>
<li>Always add a changelog entry with a meaningful explanation
<li>If you fix a bug, add a regression test for it in the regression
suite
<li>Don't commit unrelated changes together with a fix: do fine-grained
commits
<li>Always check what you're committing: make sure you're only committing
what you need and make sure you don't change line endings and
whitespace. Do a 'cvs diff -u' of the files you're going to commit and
check the changes.
<li>Don't do reformatting commits, unless you're the original author of
the code
<li>When fixing bugs, don't follow the documentation blindly, it may
well be wrong. Test the behavior on the MS runtime or ask on the list
for discussion if unsure. Don't be afraid of having your changes
reviewed.
<li>Never remove copyright notices from the code
<li>Never remove licensing info from code
<li>Never commit code you didn't write yourself or code that doesn't
have a suitable license
<li>Follow the style conventions
<li>Keep an eye on performance considerations, especially for code in
core classes, ask on the list for guidance
<li>Do a regression test run and a bootstrapping build if making changes
to core functionality before committing. Do not commit code that would
break the compile, because that wastes everybody's time. Two things
are important in this step: trying to build your sources and making
sure that you add all the new files before you do a commit.
</ul>
Also, remember to pat yourself on the back after the commit, smile and
think we're a step closer to a better free software world.
* Using CVS.
This is a small tutorial for using CVS.
** Generating an SSH key
If you are using SSH version 2, please generate your key using:
<pre>
ssh-keygen -t rsa
</pre>
And mail <a href="mailto:[email protected]">miguel</a> the
id_rsa.pub file.
If you are using SSH version 1, run:
<pre>
ssh-keygen
</pre>
And mail <a href="mailto:[email protected]">miguel</a> your
identity.pub file.
If you are using SSH from SSH Communications Security (they offer
a free SSH client for personal use), you have to use OpenSSH to
convert your public key to the required format. You have to use
OpenSSH's ssh-keygen program and write the following:
<pre>
ssh-keygen -i -f id_XXX.pub > my_public_key.pub
</pre>
where the file id_XXX.pub is your public key file,
normally located under ~/.ssh/ or ~/.ssh2/.
Send to <a href="mailto:[email protected]">miguel</a> the
my_public_key.pub file.
The *exact* format for this file must be:
<pre>
ssh-rsa XXXXX....
</pre>
You will need CVS and SSH. Windows users can get both by
installing Cygwin (<a
href="http://www.cygwin.com">http://www.cygwin.com</a>)
Unix users will probably have those tools installed already.
** Checking out the sources
To check out the sources for the first time from the
repository, use this command:
<pre>
export CVS_RSH=ssh
export [email protected]:/cvs/public
cvs -z3 co mcs mono
</pre>
** Updating your sources
Every day people will be making changes, to get your latest
updated sources, use:
<pre>
cvs -z3 update -Pd mcs mono
</pre>
Note: The '-z3' enables compression for the whole cvs action.
The '-Pd' makes the update operation (P)rune directories that
have been deleted and get new (d)irectories added to the
repository.
** Making patches
Usually you will want to make a patch to contribute, and let
other people review it before committing it. To obtain such a
"patch", you type:
<pre>
cd directory-you-want-to-diff
cvs -z3 diff -u > file.diff
mail [email protected] < file.diff
</pre>
** Committing your work
Once you get approval to commit to the CVS, or if you are
committing code that you are the maintainer of, you will want
to commit your code to CVS.
To do this, you have to "add" any new files that you created:
<pre>
cvs add new-file.cs
</pre>
And then commit your changes to the repository:
<pre>
cvs commit file-1.cs file-2.cs
</pre>
* Keeping track of changes.
We provide two e-mail based mechanisms to keep track of
changes to the code base:
<ul>
* <a href="mailto:[email protected]">
[email protected]</a>: This mailing list receives
in patch form all the changes that are being made to the
CVS.
* <a href="mailto:[email protected]">
[email protected]</a>: This mailing list only
receives the CVS commit logs with a list of files
modified.
</ul>
We hope to offer LXR and Bonsai in the future as well.
To subscribe, send an email message to
[email protected] and in the body of the
message put `subscribe'.
This will send you an email message every time a change is
made to the CVS repository, together with the information that
the author of the changes submitted.
You might also want to track the live changes, subscribe to
the <a
href="mailto:[email protected]">[email protected]</a>
to receive the patches as they are checked into CVS.
+190
View File
@@ -0,0 +1,190 @@
* The Class Library
The Class Library should be compatible with Microsoft's .NET
implementation.
Please see the <a href="class-status.html">Class Status</a>
page for a status of who is working on which classes.
We will write as much code as possible in C#. We may need to
interface with code written in C to gain access to the
functionality of libraries like libart, Gtk+, and libc.
** Contributing
We welcome contributions to the the Class Library. To get
started, check the status page for information about which
APIs are being worked on, and how to get in touch with
individual maintainers.
If you want to work on a class, first check the <a
href="download.html">Classes Distribution</a> to see if it is
not implemented yet, if not, check the <a
href="class-status.html">Class Status</a> to see if someone is
already working on it, and maybe contact them.
If nobody is working on it, mail <a
href="mailto:[email protected]">[email protected]</a>
with the class you want to implement and CC <a
href="mailto:[email protected]">[email protected]</a>.
You can also track live the activities of the Mono CVS module
by subscribing to the <a
href="http://lists.ximian.com/mailman/listinfo/mono-cvs-list">mono-cvs-list</a>
** Missing features
Our class libraries miss some features, for example, most classes
do not implement the serialization bits at all, it would be a good
contribution to add this to each class.
This is a simple task, but it needs to be done in a compatible way
with the Microsoft.NET classes: using the same arguments to serialize
and reincarnate data.
** Layout
The Class Library resides in the `mcs' module in the directoy
`class'.
Each directory in the directory represents the assembly where
the code belongs to, and inside each directory we divide the
code based on the namespace they implement.
There are two cases when we should consider portability: when
we are dealing with a couple of classes only that differ from
system to system (Consider System.Net and System.IO for Win32
and Unix). In those cases we will just place the files for
example on <t>corlib/System/System.IO/Unix-Console.cs</t> and
<t>corlib/System/System.IO/Win32-Console.cs</t>.
For classes that might differ more (for example, the
implementation of Windows.Forms), we might have different
directories altogether: <t>System.Windows.Forms/Win32</t>,
<t>System.Windows.Forms/Gtk+</t> and
<t>System.Windows.Forms/Cocoa</t>.
** Using existing components from GNOME.
Our current plan is to implement the GUI tools on top of
Gtk+. The only obstacle here is that applications from Windows
might expect to be able to pull the HWND property from the
widgets and use PInvoke to call Windows functions.
** Class Library and Win32 dependencies.
There are a few spots where the Win32 foundation is exposed to
the class library (for example, the HDC and HWND properties in
the GDI+). Casual inspection suggests that these can be
safely mapped to Gdk's GC and GdkWindow pointers without
breaking anything.
The only drawback is that support for PInvoke of Win32 code
won't be available. An alternate solution would be to use
portions of Wine, or even to use Wine as our toolkit.
*** Initial GDI+ and WinForms implementation
The initial implementation will use Gtk+ as the underlying
toolkit. Since GTK+ has already been ported to many windowing
systems other than X (including frame buffer, Win32, and BeOS)
its use should cover most applications for most users.
*** Database access
We will implement ADO.NET functionality by reusing <a
href="http://www.gnome-db.org">GNOME-DB</a>. This is an ideal
choice, since GNOME-DB was implemented precisely to provide an
ADO-like system for GNOME.
*** Component Integration
We will provide a new namespace to use GNOME specific features
as well as a namespace to host Bonobo interfaces and classes
in Mono.
** Licensing
The class library is being licensed under the terms of the
<a
href="http://www.opensource.org/licenses/mit-license.html">MIT
license.</a> This is the same license used by the X11 window
system.
** Class Library testing
We need to write regression tests that will verify
the correctness of the class library, compiler, and JIT
engine.
Please write your regression tests using <a
href="http://nunit.sourceforge.net">NUnit</a>
** Coding conventions
Please follow the conventions on the ECMA specification (On
the Annex Partition) for your coding your libraries.
Use 8 space tabs for writing your code (hopefully we can keep
this consistent). If you are modifying someone else's code, try
to keep the coding style similar.
For a rationale on 8 space tabs, read Linus Torvald's Coding
Style guidelines in the Linux kernel source for a rationale.
*** Missing implementation bits
If you implement a class and you are missing implementation bits,
please put in the code the word "TODO" and a description of what
is missing to be implemented.
*** Tagging buggy code
If there is a bug in your implementation tag the problem by using
the word "FIXME" in the code, together with a description of the
problem.
Do not use XXX or obscure descriptions, because otherwise people
will not be able to understand what you mean.
*** Tagging Lame specs
Sometimes the specification will be lame (consider Version.ToString (fieldCount)
where there is no way of knowing how many fields are available, making the API
not only stupid, but leading to unreliable code).
In those cases, use the keyword "LAMESPEC".
** Namespaces
We are using a number of namespaces in the class libraries for
private classes when we need them, you are encouraged to use these:
<pre>
Mono
.Languages // General Compiler classes
.CSharp // Specific C# parsing/tokenizing classes
.MonoBASIC // Specific VB.NET/MonoBASIC parsing/tokenizing classes
.Python // Specific Python parsing/tokenizing classes
.Runtime
.LateBind // General latebinding-support for MonoBASIC/Python
.MonoBASIC // Specific runtime classes for MonoBASIC programs
.Python // Specific runtime classes for Python programs
.Web
.UI
.Utils // Gaurav utility classes
</pre>
** FAQ
Frequently asked questions about the class library:
Q: I am writing a new class that overrides one of the system classes,
and I am getting a 1595 warning from the compiler. Should we use a
different namespace?
A: There is a quick solution to the problem, you can pass the command
line argument /nowarn:1595 and this will effectively let you use
your implementation of the code, while overriding the ones from the
system assemblies.
+54
View File
@@ -0,0 +1,54 @@
* Status of the various pieces of the class library
Classes in Mono are organized by the assembly that they belong to.
Here is the status of the different assemblies:
<ul>
<li><a href="http://www.go-mono.com/class-status-corlib.html">corlib</a>: The core library.
<li><a href="http://www.go-mono.com/class-status-System.html">System</a>.
<li><a href="http://www.go-mono.com/class-status-System.Xml.html">System.Xml</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Data.html">System.Data</a>:
Database access functionality (also check the <a href="ado-net.html">Mono ADO.NET status</a> pages).
<li><a href="http://www.go-mono.com/class-status-System.Drawing.html">System.Drawing</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Web.html">System.Web</a>:
ASP.NET classes, also check the <a href="asp-net.html">Mono ASP.NET status pages</a>
<li><a href="http://www.go-mono.com/class-status-System.Web.Services.html">System.Web.Services</a>.
<li><a
href="http://www.go-mono.com/class-status-Microsoft.VisualBasic.html">Microsoft.VisualBasic</a>:
Support runtime for Visual Basic applications
<li><a
href="http://www.go-mono.com/class-status-System.Windows.Forms.html">Windows.Forms</a>:
there is also a <a
href="http://lists.ximian.com/mailman/listinfo/mono-winforms-list">mailing
list available</a>
<li><a href="http://www.go-mono.com/class-status-System.EnterpriseServices.html">EnterpriseServices</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Runtime.Serialization.Formatters.Soap.html">System.Runtime.Serialization.Formatters.Soap</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Security.html">System.Security</a>:
Xml Signature Security classes, also check the <a href="crypto.html">Cryptography status pages</a>
</ul>
* List of not-implemented classes
Pick from the list of assemblies in the menu on the left to
view the current status of that assembly.
The tree shows items that are either missing or that have TODO
attributes associated with them.
You can use the checkboxes to show only missing or only TODO items.
Clicking on a name will take you to the <a href="http://msdn.microsoft.com/">MSDN documentation</a> for that item.
CTRL-Clicking will take you to the <a href="http://cvs.hispalinux.es/cgi-bin/cvsweb/?cvsroot=Mono">mono CVS tree</a>.
+40
View File
@@ -0,0 +1,40 @@
* Class Library Documentation
** Summary
While using inline XML tags to document classes is certainly
convenient, properly verbose documentation quickly overwhelms
the code, making the source quite difficult to read. Furthermore,
multilingual documentation makes for significant additional text.
With these considerations in mind, Mono will use external XML files
for type documentation, rather than documenting the source
inline. The XML file format used is inspired by the XML format used
to document the ECMA APIs.
Several tools will be created for managing, verifying, generating,
and updating class library documentation, including:
<ul>
<li><a href="#monodoc">monodoc - A graphical documentation viewer.</a></li>
<li>xmllint: a tool used to validate a proper XML document.
</ul>
You can download the tools to document Mono from the CVS
repository from module `monodoc'.
** Documentation Tools
*** <a name="monodoc">MonoDoc</a>
A graphical documentation viewer written in Gtk#. In the
future we will have an ASP.NET front-end to present the
documentation on the web as well.
** Status and Roadmap
** Get Involved
Help us develop Mono's documentation tools! Subscribe to
<a href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mono-docs-list</a>
and wade right in.
+13
View File
@@ -0,0 +1,13 @@
* Contacting the Mono team.
You can contact the general forum of discussion by sending
e-mail to <a href="mailto:[email protected]">[email protected]</a>
You can contact me (Miguel de Icaza) by sending e-mail to <a
href="mailto:[email protected]">[email protected]</a>. My web
page is <a
href="http://primates.ximian.com/~miguel">http://primates.ximian.com/~miguel"</a>
You can also <a
href="http://www.ximian.com/about_us/contact/">reach Ximian.</a>
+272
View File
@@ -0,0 +1,272 @@
* Contributing to the Mono project
Mono has not been completed yet. It is a project under
active development and with a vibrant community. If you are
looking at ways of helping the project, you have come to the
right web page.
There are three different philosophical approaches to helping
the Mono project, the selfish way, the altruistic or the
educational way.
The <b>selfish</b> way is packed with adventure. You start by
building your own software, and start using the compiler and
tools that come with Mono. Eventually you will run into
missing features, or a bug in the software. Since we ship all
the source code for Mono, you can start tracking down the
problem. Depending on how much time you have to devote to the
problem you could: <a href="http://bugzilla.ximian.com">File a
bug report</a> (read <a href="#goodbugreport">this</a>); track
down the problem and provide a better
<a href="http://bugzilla.ximian.com">bug report</a>; fix the
bug and provide a patch (you can <a
href="mailto:[email protected]">post it</a> to the <a
href="http://lists.ximian.com/mailman/listinfo/mono-list">mono
mailing list</a>; or discuss the solution on the mailing
list. Ideally you will also write a <a
href="testing.html">regression test</a> so the bug does not
get re-introduced in the future.
The <b>altruistic</b> is probably the easiest because you get
to pick a piece of Mono that you might want to work on. You
can pick an unfinished <a href="class-library.html">class</a> (from our <a
href="class-status.html">class status page</a>); help with the
<a href="documentation.html">documentation effort</a> (<a
href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mailing
list for the documentation effort</a>); fix existing <a
href=http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FClass+Libraries&product=Mono%2FRuntime&component=CORLIB&component=misc&component=System&component=System.Web&component=System.XML&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">runtime
bugs</a>; <a
href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FMCS&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">compiler
bugs</a>; help with the <a href="tools.html">tools</a> or
writing <a href="testing.html">tests</a> that help make Mono
more robust or help with the <a
href="http://www.go-mono.com/winforms.html">Winforms
effort</a>.
The <b>educational</b> way is an interesting one, because you
pick a technology you are interested in, and work on that
technology to learn the technology.
Those are just broad things that need to be worked on, but
something that would help tremendously would be to help with
small duties in the project that need to be addressed.
You can see what needs to be done in the class libraries <a href="class-status.html">here</a>
* IRC Channel
Many developers get together on the <b>#mono</b> irc channel
on the <b>irc.gnome.org</b> server.
** To start contributing
As a programmer, you can contribute in three different scenarios to Mono:
<ul>
* If you only have Linux/Unix.
* If you only have Windows.
* If you have both Linux and Windows.
</ul>
You might also want to check our <a href="#setup">common
setups</a> section that describes some common setups that people
use while working on Mono.
*** Contributing to the class library, regression tests or the compiler
This only requires Windows currently.
To start developing classes or to contribute to the compiler,
you only need Windows and the .NET Framework 1.0 SDK. Please notice
that you do not need Visual Studio (although you can use it if
you want). The .NET Framework SDK requires some version of
Windows XP or Windows NT. If you are running Windows 98, 95
or Me, you could use instead the <a
href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/001/829/msdncompositedoc.xml">.NET Redist package</a>, but it
lacks the documentation browser and the ildasm program (C#, VB, JScript and IL
assembler are included).
You can get it <a href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/000/976/msdncompositedoc.xml&frame=true">here</a>
If you are new to .NET, writing regression tests is a good way
of starting to contribute: it will help you get used to C# as
well as getting comfortable with the .NET APIs.
This helps because at this point you might be the best
qualified person to fix a problem found by the regression
test, or you might have a new class to implement in the .NET
world that only has a test suite.
To get started writing tests see the <a href="testing.html">Test Suite</a>
section. <a href="mono-contribution-howto.html">Here</a> there is a good All-In-One introduction to the art of writing tests.
*** Contributing to the runtime engine
This only requires Linux, currently some tasks are easier if you
have access to Windows as well.
Here are a few things you can do:
<ul>
* Port the runtime to other architectures.
* Port the runtime to other operating systems.
* Finish the IL code verifier in the runtime.
* Hack the JIT, improve the code generator, add new
pattern rules, improve the register allocator.
* Implement the debugging interfaaces
</ul>
** Bug reporting
If you find bugs in Mono, please make sure you enter a bug
report so we can keep track of problems in Mono.
To enter bug reports go to <a href="http://bugzilla.ximian.com">
http://bugzilla.ximian.com</a> and enter bug reports against
your favorite component (Mono, Runtime, C# compiler).
You can review the list of current bugs by going <a href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FClass+Libraries&product=Mono%2FMCS&product=Mono%2FRuntime&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&order=%27Importance%27&form_name=query">here</a>
<a name="goodbugreport"/>
** How to make good bug reports
A mail from Paolo to mono-devel-list contained this check list:
<ol>
* Submit a test case, the smaller it is, the better
* Use <a href="http://bugzilla.ximian.com">
http://bugzilla.ximian.com</a> to report the bug.
<p>In <b>addition</b> to bugzilla, posting to the list is
fine if the bug merits larger exposure or design
discussions to solve; posting to the list twice or more
is just a way to annoy people and make them waste time,
specially when you start a new thread about it.
* If the test involves libraries or assemblies that are
not part of mono, add info about where to download all
the dependencies, and how to compile/install them.
* If compiling the test case requires more than:
<pre> mcs test.cs </pre>
provide the <b>full command line</b> you used to compile
the test.
* If running the test requires more than:
<pre> mono test.exe </pre>
provide the <b>full command line</b> needed to replicate
the bug.
* Provide info about the version of the software you're
using (both mono and the operating system or relevant
libraries).
* Provide the output you expect the test case to produce.
* Provide the actual output <b>you</b> get from the test case.
</ol>
A good bug report complies with at least 6 items from the list.
If your bug report complies with 3 or less items, it is very
poor and it means it will take much more time to fix (when it's
not ignored).
** Small tasks
A few smaller tasks are here, dropped in no particular order:
<ul>
* <b>Mono/doc and web site:</b> They need to be
packaged up in the official `distribution'
* Adding serialization support to all the classes.
We have many classes, but we have not implemented in
many cases the serialization and re-incarnation support in
them (this is pretty straight forward code, and simple,
but there is a lot to be done here).
</ul>
* Emacs support
Brad Merryl's C# mode for Emacs is available: <a
href="http://www.cybercom.net/~zbrad/DotNet/Emacs/">http://www.cybercom.net/~zbrad/DotNet/Emacs/</a>
* Books on C# and DotNet.
<ul>
* Dotnet Books (<a href="http://www.dotnetbooks.com">http://www.dotnetbooks.com</a>)
* Dotnet Resources (<a href="http://www.dotnetexperts.com/resources/">
http://www.dotnetexperts.com/resources</a>)
* O'Reilly C# Essentials (<a href="http://www.oreilly.com/catalog/csharpess/">
http://www.oreally.com/catalog/csharpess</a>)
* O'Really .NET Essentials (<a href="http://www.oreilly.com/catalog/dotnetfrmess/">
http://www.oreally.com/catalog/dotnetfrmess</a>)
</ul>
<a name="setup">
* Common Setups
People running both Linux and Windows while contributing to
Mono use a number of tricks to increase their productivity.
Scenarios:
<ul>
* <b>Linux host and Windows host</b>
The Windows file system is shared (right click on
your hard drive icon, and select sharing, allow this
to be shared).
The Windows machine has the required build tools
(cygwin, and the .NET framework). On the Windows
machine, you want to setup the ssh server (run the
ssh-host-config program to configure your ssh) and
run it (from a cygwin terminal, type: /usr/sbin/sshd).
From the Linux side, you want to mount the Windows
file system, using something like this:
<tt><pre>
mount -t smbfs -o uid=miguel,username="Miguel de Icaza" "//quack/c$" /mnt
</pre></tt>
In the above example, my Linux user name is
`miguel', and this will allow this user to have
read/write access to the share.
The host name is `quack', and the name of the share
is `c$' (that is the C: partition).
The file system is accessible on /mnt.
You can perform your cvs update and cvs commits from
the /mnt directory, and run Emacs or your favorite
Linux text editor on the Unix side in this way.
Then from another terminal, you can ssh into your
Windows box using ssh, like this: ssh "Miguel de Icaza@quack"
</ul>
* Special Note
If you have looked at Microsoft's implementation of .NET or
their shared source code, you may not be able to contribute
to Mono. Details will follow when we know more about this.
In general be careful when you are implementing free software
and you have access to proprietary code. We need to make sure
that we are not using someone else's copyrighted code
accidentally.
Please do not use the <b>ildasm</b> program to disassemble
proprietary code when you are planning to reimplement a class
for Mono. If you have done this, we might not be able to use
your code.
Please stick to published documentation for implementing any
classes.
+378
View File
@@ -0,0 +1,378 @@
* Cryptography
In the .NET framework cryptography can be found under a number of
namespaces in several assemblies.
** Assembly: corlib
*** Namespace: <b>System.Security.Cryptography</b>
Thanks to the work of many people this namespace is almost complete.
**** Status
<ul>
* Every classes are present.
* Most classes have their unit tests. Some tests like <code>
SymmetricAlgorithmTest</code> are generated by external
tools.
* MACTripleDES is compatible with the implementation shipped in
framework 1.0. Version 1.1 gives different results when the
MACed data is a multiple of BlockSize (8 bytes).
</ul>
**** TODO
<ul>
* RNGCryptoServiceProvider is currently only working on Linux.
The current implementation reside in Mono's runtime and use
the <code>/dev/[u]random</code> device (which do not exists
under Windows). A Windows specific alternative is available
using the Mono.Security.Win32 assembly.
* Keypair persistance for RSA and DSA. This persistance must
somehow be linked with X509 certificate stores (in planning).
* <code>PasswordDeriveBytes.CryptDeriveKey</code> is included
in MS BCL to provide compatibility with existing Windows
applications. The main problem is that the key derivation
algorithm can be different for every CSP (Crypto Service
Provider). However for compatibility we should provide an
implementation compatible with the MS CSP (most likely used).
</ul>
**** Notes
<ul>
* All cryptographic algorithms are entirely managed, including
classes named <code>*CryptoServiceProvider</code>, with the
exception of <code>RNGCryptoServiceProvider</code> (which
implementation resides in the runtime).
* There is a bug in the <code>PKCS1MaskGenerationMethod</code>
class (in both framework 1.0 and 1.1). This means our
implementation isn't compatible with MS (but is compatible with
PKCS#1 v.2.1). However we get OAEP padding for every platform!
* Look at assembly Mono.Security.Win32 if you require more
compatiblity with the Microsoft implementation (like accessing
a particuliar keypair container inside a specific CSP).
</ul>
*** Namespace: <b>System.Security.Cryptography.X509Certificates</b>
**** Status
<ul>
* X.509 certificates are parsed using 100% managed code
(using the Mono.Security.ASN1 class).
* Software Publisher Certificates (SPC) used by Authenticode
(tm) to sign assemblies are supported (extraction from PE
files) but <b>not yet</b> validated.
* Unit tests are generated from a set of existing certificates
(about a dozen) each having different properties. Another
set of certificates (more than 700) are used for a more
complete test (but isn't part of the standard test suite for
size and time consideration, i.e. a 7.5Mb C# source file).
</ul>
**** TODO
<ul>
* Authenticode(tm) support is incomplete. We can extract the
certificates from PE files but cannot validate the signature
nor the certificate chain (and we're still missing some trust
anchors). See Tools section for more information.
</ul>
**** Notes
<ul>
* Except for their structure <b>there are no validation of the
certificates</b> done by this class (this is by design and
isn't a restriction of Mono!). This means that certificate
signatures and validity dates are <b>never</b> checked
(except when used for Authenticode, i.e.
<code>CreateFromSignedFile</code>).
* The newer X509Certificate class included in Microsoft's Web
Service Enhancement (WSE) is a little better (as it includes
CryptoAPI's validation) when <code>IsCurrent</code> is called.
See assembly <b>Microsoft.Web.Services</b> for more details.
* The class Mono.Security.X509.X509Certificate (in Mono.Security
assembly) is becoming a much better alternative - and will
continue to evolve to support the security tools.
* Microsoft implementation of <code>X509Certificate</code> is
done by using CryptoAPI (unmanaged code). From the exceptions
thrown Authenticode(tm) support is done via COM.
</ul>
<hr>
** Assembly: System.Security
*** Namespace: <b>System.Security.Cryptography.Xml</b>
This namespace implements the <a href="http://www.w3.org/TR/xmldsig-core/">
XML Digital Signature</a> specification from
<a href="http://www.w3.org/">W3C</a>.
**** Status
<ul>
* All classes are present but some Transforms are only stubbed.
* We now have a fully managed C14N implementation.
* Most classes have their unit tests.
</ul>
**** TODO
<ul>
* Complete all Transform derived classes.
</ul>
<hr>
** Assembly: Mono.Security
<b>Rational: </b>
This assembly provides the missing pieces to .NET security. On Windows
CryptoAPI is often used to provide much needed functionalities (like
some cryptographic algorithms, code signing, X.509 certificates). Mono,
for platform independance, implements these functionalities in 100%
managed code.
*** Namespace: Mono.Security
<ul>
* Structures (ASN1, PKCS7) and primitives (PKCS1).
</ul>
*** Namespace: Mono.Security.Authenticode
<ul>
* Code signing and verification.
* Support for SPC (Software Publisher Certificate) files and
PVK (Private Key) files.
</ul>
*** Namespace: Mono.Security.Cryptography
<ul>
* Additional algorithms: MD2, ARCFOUR (required for SSL)
* Convertion helpers
</ul>
*** Namespace: Mono.Security.X509
<ul>
* X.509 structures (certificate, CRL...) building and decoding.
</ul>
*** Namespace: Mono.Security.X509.Extensions
<ul>
* X.509 extensions (from public X.509 to private PKIX, Netsapce,
Microsoft, Entrust...).
</ul>
**** Status
<ul>
* Some part of the work has not yet been commited (still cleaning up).
* A big part of this assembly is also included inside Mono's
corlib. The classes are duplicated in this assembly so the
functionalities can be used without a dependency on Mono's
corlib (which depends on Mono's runtime).
* Unit test coverage isn't (yet) complete.
</ul>
<hr>
** Assembly: Mono.Security.Win32
<b>Rational: </b>
This assembly goal is to provide maximum compatibility with CryptoAPI
to application running with Mono's runtime on the Windows operating
system.
<b>This assembly should NEVER be used directly by any application</b>
(e.g. referecing the assembly from a project).
The classes should only be used by modifying the <code>machine.config
</code> configuration file (and then only if this increased
compatibility is required by an application).
See the file <code><a href="http://cvs.hispalinux.es/cgi-bin/cvsweb/~checkout~/mcs/class/Mono.Security.Win32/README?rev=1.1&content-type=text/plain&cvsroot=mono">/mcs/class/Mono.Security.Win32/README</a></code>
for complete instructions.
*** Namespace: Mono.Security.Cryptography
**** Status
<ul>
* A RNGCryptoServiceProvider built on top of CryptoAPI. This
allows Windows users to get around the limitation of the
runtime RNG (which requires <code>/dev/[u]random/</code>).
* Wrapper classes for unmanaged versions of hash algorithms:
MD2, MD4, MD5 and SHA1 are supported. <b>note</b>: some
algorithms shouldn't be used in new design (MD4 is broken,
MD2 and MD5 aren't considered safe for some usage). They are
included to preserve interoperability with older applications
(e.g. some old, but still valid, X.509 certificates use MD2).
</ul>
**** TODO
<ul>
* Wrapper classes for unmanaged versions of symmetric
encryption algorithms (like DES, TripleDES, RC2 and others
present in default CSP).
* Wrapper classes for unmanaged versions of asymmetric
algorithms (like DSA and RSA) which persist their keypair
into the specified CSP.
</ul>
**** Ideas
<ul>
* Similar assemblies (e.g. <code>Mono.Security.XXX</code>)
could be created for <a href="http://www.openssl.org">OpenSSL</a>,
<a href="http://www.mozilla.org/projects/security/pki/nss/">NSS</a>,
<a href="http://www.eskimo.com/~weidai/cryptlib.html">crypto++</a>,
<a href="http://www.cryptlib.orion.co.nz/">cryptlib</a> ... for
improved performance and/or HSM (Hardware Security Module) support
under Linux and/or Windows.
</ul>
<hr>
** Assembly: Microsoft.Web.Services
Microsoft Web Service Enhancement (WSE), known as Web Service
Development Kit (WSDK) in it's beta days, is an add-on the .NET
framework that implements WS-Security (and other WS-* specifications).
It also includes improved support for XML Signature (replacing and/or
extending <code>System.Security.Cryptography.Xml</code>) and X.509
certificates classes.
Note: WSE is distributed as an add-on because some specifications,
like WS-Security, aren't yet completed by
<a href="http://www.oasis-open.org/committees/wss/">OASIS</a> or
other committees.
<b>[*] There are some licensing issues to consider before starting to
implement WS-Security. All contributors must sign an agreement with
Microsoft before commiting anything related to WS-Security into CVS.
</b>
*** Namespace: Microsoft.Web.Services.Security [*]
*** Namespace: Microsoft.Web.Services.Timestamp [*]
**** Status
<ul>
* Nothing (yet) commited in CVS <b>[*]</b>.
</ul>
*** Namespace: Microsoft.Web.Services.Security.X509
**** Status
<ul>
* Nothing (yet) commited in CVS. However the classes in this
namespace are outside WS-Security scope. So development, for
those classes, could be done without signing this agreement.
</ul>
**** TODO
<ul>
* We need to define certificate stores (for both users and
machines). These sames stores must be linked with asymmetric
keypairs. This could also be used to store the SPC roots.
</ul>
*** Notes
<ul>
* Microsoft has <a href="http://microsoft.com/downloads/details.aspx?FamilyId=21FB9B9A-C5F6-4C95-87B7-FC7AB49B3EDD&displaylang=en">released</a>
a technical preview of WSE 2.
</ul>
<hr>
** Tools
There are many tools in the .NET framework that indirectly interacts
with some cryptographic classes. Mono will eventually need these tools.
Unless noted the tools should work on any CLR (tested with both Mono
and Microsoft).
**** Status
The following tools are complete (mostly complete):
<ul>
* <code>secutil</code> is a tool to extract certificates and
strongnames from assemblies in a format that can be easily
re-used in source code (C# or VB.NET syntax).
* <code>cert2spc</code> is a tool to transform multiple X.509
certificates and CRLs into a Software Publisher Certificate
(SPC) file - which is a long name for a simple PKCS#7 file.
* <code>makecert</code> to create X.509 test certificates that
can be used (once transformed in SPC) to sign assemblies. It's
now possible to generate SSL certificates for web servers.
</ul>
Somewhat usable, somewhat incomplete:
<ul>
* <code>certview</code> is a certificate viewer for
<code>System.Windows.Forms</code> (right now only working on
Windows), while <code>gcertview</code> is the same viewer
implemented for GTK# (working on both Windows and Linux).
* <code>sn</code> is a clone of the <code>sn</code> to manage
strongnames. Current version is limited to creating new keypairs
and converting values.
* <code>monosn</code> is a clone of the <code>sn</code> to manage
strongnames. This tools is part of the runtime (not the class
library) and as such is written in C and won't run without Mono.
</ul>
**** TODO
The following tools are still missing or largely incomplete:
<ul>
* <code>signcode</code> and <code>chktrust</code> (in progress)
for signing and validating Authenticode(tm) signatures on
assemblies (or any PE file).
* Other tools like a, GUI-based, certificate manager...
</ul>
Note that many of the tools requires the class library and/or the
runtime to be ready for them. E.g. StrongName and Authenticode signatures
tools are of limited use until supported by the runtime.
<hr>
** Other stuff
<ul>
* SSL/TLS for secure communication (a prototype is under way).
Some work is already visible in Mono.Security assembly (e.g.
RC4, RSAManaged ...).
</ul>
<hr>
** How to Help
<ul>
* Complete any of the TODO (and feel good about it ;-).
* Analyse the current coverage of the unit tests on the
cryptographic classes and complete the unit tests. <b><code>
monocov</code> does a great job at this! Now we just need to
complete the missing unit tests.</b>
* Optimization can also be done on most algorithms as crypto
is never fast enough. Some have been done using the
Community Edition of BoundChecker (a free VisualStudio
addon) - recommanded! Just be sure to test every optimization
(using the unit tests) carefully - it's so fast to break an
algorithm ;-).
* Write some documentation on the cryptographic classes for
<b>monodoc</b> as I'm not a very good writer (at least in English).
</ul>
Contact Sebastien Pouliot (<a href="mailto:[email protected]">home</a>
, <a href="mailto:[email protected]">work</a>) if you need additional
informations about the status of the cryptographic classes.
<hr>
Last reviewed: August 9, 2003 (post mono 0.25)
+190
View File
@@ -0,0 +1,190 @@
* Developer FAQ
** New classes
Q: Should we write classes which are not part of the .NET or ECMA specs?
A: Yes. The ECMA and .NET specifications are far from complete, and
to produce a complete platform we will need a number of other
classes and components.
Any new classes that are not part of .NET or ECMA should be
designed to be reusable on anyone's CLI implementation. So that
Windows developers can also use any new classes that we come up
with.
We have a few existing <a href="ideas.html">Ideas on missing
classes</a>
** Language Compatibility
Q: What is the magic that allow multiple languages to co-exist?
A: From Fergus Henderson:
<i><blockquote>
There are different levels of interoperability.
The ECMA spec defines different categories of
CLS (Common Language Specification) conformance.
There are also some useful categories that don't
correspond to any of the levels defined in the ECMA spec.
In increasing degree of difficulty, your language implementation
can
<ul>
* (a) just generate IL
* (b) be a CLS "consumer", which means that it can read in
meta-data describing component interfaces,
and that it provides a way to declare variables of
CLS-complaint types and to call CLS-complaint methods.
* (c) be a CLS "extender", which means that it can in addition
derive from CLS-compliant classes
and implement CLS-compliant interfaces
* (d) be able to produce components with *any* CLS-compliant
component interface.
</ul>
Supporting some of these may require extending your language. However,
you can get quite a lot of interoperability by just putting appropriate
functionality in your compiler, without extending your language.
For some things, e.g. ASP.NET, your language implementation also needs to be
able to
<ul>
* (e) consume CodeDom trees. CodeDom trees are an abstract
representation of programs in a form similar to a C# parse
tree, with embedded code snippets (unparsed strings).
Given a CodeDom tree, with the snippets in your language,
your language implementation needs to generate a (i) .NET
assembly and possibly also (ii) a source file in your language.
* (f) produce CodeDom trees. For some applications,
your language implementation also needs to be able to
round-trip from CodeDom -> your language -> CodeDom.
</ul>
and for some things it needs to
<ul>
* (g) generate *verifiable* IL
</ul>
So when you hear all the hype about how language XYZ is a
".NET language", make sure you ask which of these different
things are supported.
[For the record, Mercury currently supports (a). We're working on
(b) and (g), and on parts of (c) and (e). We're never going to do (f), I very
strongly doubt we'll ever do (d), and for (c) we might only ever support
implementing interfaces, not deriving from classes.]
</blockquote></i>
** PInvoke
Q: What are the two major initiatives to implement PInvoke?
A: Fergus Henderson answers:
<i><blockquote>
Many of the .NET APIs will need to be implemented using code that calls C/Unix
APIs, such as stat(). The standard way of interfacing with native code from
.NET code is to use "PInvoke". However, there is a difficulty: many of
these APIs are defined in terms of types such as C's `long' or `size_t'
or the Posix `struct stat' whose representation varies depending on the
platform (architecture/OS/C compiler). There's no *portable* way of
accessing those from .NET managed code.
So, there are a couple of different approaches.
One possibility is to access such routines by writing a wrapper, e.g. in C,
that provides the same functionality without using types with a system-dependent
representation. The wrapper can then be directly accessed from portable
.NET code. The .NET code remains both source- and binary-portable;
the wrapper code is source-portable, but needs to be compiled
seperately for each target platform. The drawback of this approach is
that you have to write a lot of cumbersome wrapper code.
Another possibility is to extend the .NET VM with support for an
additional custom attribute, e.g. "[PosixType]". The VM would then
represent types tagged with this attribute in the same way that the
underlying system represents those types. With this approach, no
wrapper code would be needed. A drawback of this approach is that it
pushes quite a bit of complexity into the VM; the VM would have to know
the native representation of all types annotated with this attribute.
Another drawback is that code using this extension might not work on
different VMs.
There have also been some other suggestions, but those are the two that
I think are the best.
</blockquote></i>
Q: What is the problem implementing PInvoke?
A: Again, from Fergus Henderson:
<i><blockquote>
There's no problem implementing PInvoke as specified in the ECMA
specs and/or MS documentation. It's just that PInvoke by itself
doesn't solve all of the problems; in particular it doesn't solve
the problem of C types whose representation is different on different
systems.
</blockquote></i>
** CVS use
Q: Why do we keep ChangeLogs and make the CVS commit messages be the
same? One could be generated from the other
A: There are a number of reasons for keeping ChangeLog files as well as
CVS commit files:
<ul>
* Offline programming: when people are traveling, CVS logs are
not available.
* Slow CVS access: Many people work over modem lines (very
typical for contributors in Europe, Asia, Latin America)
using CVS is slow and might not be available to you (cvs
server down, no anoncvs server available).
* ChangeLogs travel in a released tarball package, so it is
possible to study the rationale of changes even after a
project is long "released", or you only have the sources for
the code.
* ChangeLog are not metadata for each file, they are live
files that you can browse in the package that is being
distributed.
</ul>
Making the CVS commit message be the same as the ChangeLog has other
benefits:
<ul>
* You can track down with `cvs log' what things were changed,
and match those to meaningful reports on the intentions of
the commit.
* When reading the commits-list, you can get a glimpse of the
changes without having to diff out or cvs update your tree.
* You can read off-line the changes that are being made
(asyncrouns operation).
</ul>
This mechanism works very well for GNOME and other projects.
Q: Should I use any of the special RCS keywords like $Id: devel-faq,v 1.1 2001/07/31 21:13:05 miguel Exp $, $Author: miguel $,
$Date: 2001/07/31 21:13:05 $, or $Revision: 1.1 $?
A: Please avoid using those in the source code in the CVS. They
are not really useful, and they cause a lot of conflicts when
people have separate CVS trees.
It was a nightmare with the Linux kernel when two people had their
private CVS trees and were submitting patches to the core.
+251
View File
@@ -0,0 +1,251 @@
* Documentation
Although most of the concepts from Microsoft.NET can
be applied to the completed Mono platform, we do need to
have a complete set of free documentation written specifically
for Mono.
The documentation license we have chosen is the GNU Free
Documentation License (FDL), the standard for most documents
in the free software world.
We need documentation on a number of topics:
<ul>
* The development tools (compilers, assembler tools,
language reference, design time features): these
live in the `monodoc' CVS module.
* Frequently Asked Question compilations.
* HOWTO documents.
* The Class Libraries (Both the original .NET class
libraries as well as the class libraries produced by
the project).
* Tutorials on Mono and the specifics of running it.
* A guide to Mono as compared to the Microsoft.NET
Framework SDK
</ul>
* Class Library documentation
We are moving to a new setup for documenting the class libraries,
and you can read about it <a href="classlib-doc.html">here</a>.
There are two classes of documentation: free documentation for
existing .NET classes and documentation for the classes that
we have developed on top of .NET.
There is a large body of documentation that came from the ECMA
standarization effort that has been checked into CVS. It does
not contain everything Mono and .NET have, so they need to be
updated and augmented.
** Gtk# documentation
We also have a large body of class libraries that are specific
to Mono, for example the documentation for Gtk#.
We have checked in stub documentation for Gtk# into the CVS
repository (on gtk-sharp/doc) and we need volunteers to help
populate the documentation for it. Since Gtk# is a wrapper
for Gtk, plenty of documentation exists in the <a
href="http://developer.gnome.org/doc/API">Gnome developer
site</a>.
To get started:
You need to download Gtk# from the CVS repository. The module
name is `gtk-sharp'. You can obtain a copy from both the CVS
repository or the anonymous CVS repository.
To pull your copy type:
<pre>
cvs co gtk-sharp
</pre>
Documentation lives in gtk-sharp/doc/en. The "en" indicates the
English language, the first one we are targeting. We can later
do translations, but for now we are focusing on a single
language.
In that directory you will find the documentation organized by
namespaces. One directory per namespace. In the directories
you will find one XML file per class that needs to be
documented. The mission is to fill in the data with useful
information. Feel free to grab liberally information from the
Gtk documentation from:
<a href="http://developer.gnome.org/doc/API/">http://developer.gnome.org/doc/API/</a>
Of course, the API does not apply directly. It only applies at
a foundational level, so you can not really just copy and
paste. Summaries, and remarks sections can probably be lifted
with little or no effort.
Gtk# uses properties to represent get/set operations in the C
API, so you can also use some bits from there.
Most of the documentation contains already place holders for
text, we use the internationally approved phrase for this
purpose, `To be added'. So the quest is to remove all of the
"To be added" strings with information with resembles as closely
as possible the toolkit reality.
*** The pieces to be filled.
Summaries are one or two line descriptions of the element
(class, struct, interface, method, field, event, delegate), and
its used to render summary pages. So it has to be short.
The "remarks" section is used to describe in detail the element.
**** Tags.
As you document Gtk# you will have a number of tags that you can
use inside the summary and remarks sections, these are:
<pre>
&lt;para&gt; &lt;/para&gt;
</pre>
Used to separate paragraphs.
<pre>
&lt;paramref name="param_name"/&gt;
</pre>
Used to reference a formal parameter to a function.
<pre>
&lt;see cref="T:SomeTypeName"/&gt;
</pre>
Use this to reference a type, this will include an hyper
link to the page for type SomeTypeName.
For example, to reference "System.Enum", do:
<pre>
&lt;see cref="T:System.Enum"/&gt;
</pre>
<pre>
&lt;see cref="P:SomeTypeName.Property"/&gt;
</pre>
Use this to reference a property, this will include an hyper
link to the page for the property `Property' of type `SomeTypeName'.
For example, to reference the BaseType property in System.Type, do:
<pre>
&lt;see cref="P:System.Type.BaseType"/&gt;
</pre>
<pre>
&lt;see cref="M:SomeTypeName.Method(type,type)"/&gt;
</pre>
Use this to reference a method, this will include an hyper
link to the page for the method `Method' of type `SomeTypeName'.
For example, to reference the ToString method in System.Object, do:
<pre>
&lt;see cref="M:System.Object.ToString()"/&gt;
</pre>
<pre>
&lt;see langword="keyword"/&gt;
</pre>
Use this to link to a keyword in the C# language, for
example to link to `true', do:
<pre>
&lt;see langword="true"/&gt;
</pre>
<pre>
&lt;example&gt; ... &lt;/example&gt;
</pre>
Use example to insert an example. The example can
contain explanatory text and code.
<pre>
&lt;code lang="C#"&gt;.. &lt;/code&gt;
</pre>
Use this to provide a sample C# program, typically used
within the &lt;example&gt; tags.
When providing examples, try to provide a full example,
we would like to be able to have a button to compile and
run samples embedded into the documentation, or pop up
an editor to let the user play with the sample.
You can link to an example like this:
<pre>
&lt;code lang="C#" source="file.cs"&gt; &lt;/code&gt;
</pre>
<pre>
&lt;item&gt;
</pre>
<pre>
&lt;list type="bullet"&gt; &lt;/list&gt;
</pre>
Use this to create lists. Lists contains &lt;item&gt;
elements
<pre>
&lt;list type="table"&gt; &lt;/lits&gt;
&lt;listheader&gt;
&lt;term&gt;YOUR FIRST COLUMN&lt;/term&gt;
&lt;description&gt;YOUR DESCRIPTION&lt;/description&gt;
&lt;/listheader&gt;
</pre>
For two-column tables. Inside use:
<pre>
&lt;item&gt;
&lt;term&gt;First&lt;/term&gt;
&lt;description&gt;First descritpion&lt;/description&gt;
&lt;/item&gt;
&lt;item&gt;
&lt;term&gt;Second&lt;/term&gt;
&lt;description&gt;Second descirption&lt;/description&gt;
&lt;/item&gt;
</pre>
** Words of warning.
A few words of warning and advice for class documentors:
A well-documented API can ease hours of frustration; as Mono
matures, robust and complete class library documentation will
become increasingly important. As you write API documentation,
whether it is embedded in source files or in external Monodoc XML,
please keep the following in mind:
Plagarism, even if it's unintentional, is a Bad Thing(TM).
Microsoft's .NET Framework Class Library documentation is an
excellent resource for understanding the behavior and properties of
a type, and a lot of hard work went in to creating this (copyrighted)
resource. Please don't copy from Microsoft's reference when
documenting a type.
To avoid this, I (<a href="mailto:[email protected]">[email protected]</a>)
suggest that you read the complete Microsoft documentation for a type,
ponder it for a while, and write the Mono documentation in your own
words. While it's certainly okay to refer to the Microsoft
documentation to clarify your understanding of behavior or properties,
please don't open the Microsoft docs and refer to them for each member
you document.
There's a lot of domain expertise among the class library contributors;
let's put the same personal stamp on the class library documentation
that we have on the class libraries themselves.
+1183
View File
File diff suppressed because it is too large. Load diff
+301
View File
@@ -0,0 +1,301 @@
* Embedding the Mono runtime, preliminary version
This document describes how to embed the Mono runtime in your
application, and how to invoke CIL methods from C, and how to
invoke C code from CIL
Slides for Paolo's presentation at .NET ONE on the embedding
API are available here: <a
href="http://primates.ximian.com/~lupus/slides/embed">Hosting the Mono
Runtime</a>. You can also get his <a
href="http://primates.ximian.com/~lupus/slides/embed/Mono-0.01.tar.gz">sample
Mono module for Perl</a>
Authors: Paolo Molaro, Miguel de Icaza.
* Embedding the runtime.
Embedding the runtime consists of various steps:
<ul>
* Compiling and linking the Mono runtime
* Initializing the Mono runtime
* Optionally expose C code to the C#/CIL universe.
</ul>
These are discussed in detail next.
** Compiling and Linking
To embed the runtime, you have to link your code against the
Mono runtime libraries. To do this, you want to pass the
flags returned by pkg-config to your compiler:
<pre>
pkg-config --cflags --libs mono
</pre>
Like this:
<pre>
gcc sample.c `pkg-config --cflags --libs mono`
</pre>
You can separate the compilation flags from the linking flags, for
instance, you can use the following macros in your makefile:
<pre>
CFLAGS=`pkg-config --cflags mono`
LDFLAGS=`pkg-config --libs mono`
</pre>
** Initializing the Mono runtime
To initialize the runtime, call mono_jit_init, like this:
<pre>
MonoDomain *domain;
domain = mono_jit_init ("domain-name");
</pre>
That will return a MonoDomain where your code will be
executed. You can create multiple domains. Each domain is
isolated from the other domains and code in one domain will
not interfere with code in other domains. This is useful if
you want to host different applications in your program.
Now, it is necessary to transfer control to Mono, and setup
the threading infrastructure, you do this like this:
<pre>
void *user_data = NULL;
mono_runtime_exec_managed_code (domain, main_thread_handler, user_data);
</pre>
Where your main_thread_handler can load your assembly and execute it:
<pre>
static void main_thread_handler (gpointer user_data)
{
MonoAssembly *assembly;
assembly = mono_domain_assembly_open (domain, "file.dll");
if (!assembly)
error ();
</pre>
In the above example, the contents of `file.dll' will be
loaded into the domain. This only loads the code, but it will
not execute anything yet. You can replace `file.dll' with
another transport file, like `file.exe'
To start executing code, you must invoke a method in the
assembly, or if you have provided a static Main method (an
entry point), you can use the convenience function:
<pre>
retval = mono_jit_exec (domain, assembly, argc - 1, argv + 1);
</pre>
If you want to invoke a different method, look at the
`Invoking Methods in the CIL universe' section later on.
** Shutting down the runtime
To shutdown the Mono runtime, you have to clean up all the
domains that were created, use this function:
<pre>
mono_jit_cleanup (domain);
</pre>
** Applications that use threads.
The Boehm GC system needs to catch your calls to the pthreads
layer, so in each file where you use pthread.h you should
include the &lt;gc/gc.h&gt; file.
* Exposing C code to the CIL universe
The Mono runtime provides two mechanisms to expose C code to
the CIL universe: internal calls and native C code. Internal
calls are tightly integrated with the runtime, and have the
least overhead, as they use the same data types that the
runtime uses.
The other option is to use the Platform Invoke (P/Invoke) to
call C code from the CIL universe, using the standard P/Invoke
mechanisms.
To register an internal call, use this call in the C code:
<pre>
mono_add_internal_call ("Hello::Sample", sample);
</pre>
Now, you need to declare this on the C# side:
<pre>
using System;
using System.Runtime.CompilerServices;
</pre>
<pre>
class Hello {
[MethodImplAttribute(MethodImplOptions.InternalCall)]
extern static string Sample ();
}
</pre>
Since this routine returns a string, here is the C definition:
<pre>
static MonoString*
Sample ()
{
return mono_string_new (mono_domain_get (), "Hello!");
}
</pre>
Notice that we have to return a `MonoString', and we use the
`mono_string_new' API call to obtain this from a string.
* Invoking Methods in the CIL universe
Calling a method in the CIL universe from C requires a number of steps:
<ul>
* Obtaining the MonoMethod handle to the method.
* The method invocation.
</ul>
** Obtaining a MonoMethod
To get a MonoMethod there are several ways.
You can get a MonoClass (the structure representing a type)
using:
<pre>
MonoClass *
mono_class_from_name (MonoImage *image, const char* name_space, const char *name);
</pre>
and then loop in the returned class method array until you get
the one you're looking for. There are examples of such
searches as static functions in several C files in
metadata/*.c: we need to expose one through the API and remove
the duplicates.
The other, simpler, way is to use the functions in
debug-helpers.h: there are examples of their use in monograph,
mint and the jit as well. You basically use a string
description of the method, like:
<pre>
"System.Object:GetHashCode()"
</pre>
and create a MonoMethodDesc out of it with:
<pre>
MonoMethodDesc* mono_method_desc_new (const char *name, gboolean include_namespace);
</pre>
You can then use:
<pre>
MonoMethod* mono_method_desc_search_in_class (MonoMethodDesc *desc, MonoClass *klass);
MonoMethod* mono_method_desc_search_in_image (MonoMethodDesc *desc, MonoImage *image);
</pre>
to search for the method in a class or in an image. You would
tipically do this just once at the start of the program and
store the result for reuse somewhere.
** Invoking a Method
There are two functions to call a managed method:
<pre>
MonoObject*
mono_runtime_invoke (MonoMethod *method, void *obj, void **params,
MonoObject **exc);
and
MonoObject*
mono_runtime_invoke_array (MonoMethod *method, void *obj, MonoArray *params,
MonoObject **exc);
</pre>
obj is the 'this' pointer, it should be NULL for static
methods, a MonoObject* for object instances and a pointer to
the value type for value types.
The params array contains the arguments to the method with the
same convention: MonoObject* pointers for object instances and
pointers to the value type otherwise. The _invoke_array
variant takes a C# object[] as the params argument (MonoArray
*params): in this case the value types are boxed inside the
respective reference representation.
From unmanaged code you'll usually use the
mono_runtime_invoke() variant.
Note that this function doesn't handle virtual methods for
you, it will exec the exact method you pass: we still need to
expose a function to lookup the derived class implementation
of a virtual method (there are examples of this in the code,
though).
You can pass NULL as the exc argument if you don't want to
catch exceptions, otherwise, *exc will be set to the exception
thrown, if any. if an exception is thrown, you can't use the
MonoObject* result from the function.
If the method returns a value type, it is boxed in an object
reference.
We have plans for providing an additional method that returns
an unmanaged->managed thunk like this:
<pre>
void* mono_method_get_unmanaged_thunk (MonoMethod *method);
</pre>
You'll be able to store the returned pointer in a function
pointer with the proper signature and call that directly from
C:
<pre>
typedef gint32 (*GetHashCode) (MonoObject *obj);
GetHashCode func = mono_method_get_unmanaged_thunk (System_Object_GetHashCode_method);
gint32 hashvalue = func (myobject);
</pre>
It may not be possible to manage exceptions in that case,
though. I need to think more about it.
** Threading issues
If your application creates threads on its own, and you want them to
be able to call code into the CIL universe with Mono, you have to
register the thread with Mono before issuing the call.
To do so, call the mono_thread_attach() function before you execute
any managed code from the thread
* Samples
See the sample programs in mono/sample/embed for examples of
embedding the Mono runtime in your application.
+1424
View File
File diff suppressed because it is too large. Load diff
Executable
+196
View File
@@ -0,0 +1,196 @@
* Firebird and Interbase Data Provider
<ul>
<li>ADO.NET Data Provider for Firebird and Interbase databases</li>
<li>Does not exist in Mono, but is a separate project</li>
<li>The <a href="http://firebird.sourceforge.net/index.php">Firebird Relational Database</a> is
is an independent project which uses source code based on the Interbase source code released
by Borland under the Interbase Public License</li>
<li>Both the Firebird Relational Database and the Firebird .NET Data Provider can be
downloaded from <a href="http://sourceforge.net/projects/firebird/">here</a></li>
<li>The Firebird .NET Data provider has been made
available by Carlos Guzmán Álvarez (aka "Carlos G.A."), who has also made a
number of contributions to the OdbcJdbc code</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Currently, it is able to connect to Firebird and Interbase databases
and execute commands</li>
<li>The new data
provider/driver is written in C# and provides a high-performance native
implementation of the GDS32/API functions. This means that .Net developers
will be able to access Firebird databases without the need of Firebird
client install</li>
<li>In support of the new module, a new mailing list
<a href="http://lists.sourceforge.net/lists/listinfo/firebird-net-provider">firebird-net-provider</a> has
been created. Please use this list for any
questions that you may have about the provider</li>
<li>Stuff that works:
<ul>
<li>Currently implemented classes:
<ul>
<li>Connection and Connection Pooling</li>
<li>Command</li>
<li>Transaction</li>
<li>CommandBuilder</li>
<li>DataAdapter</li>
<li>DataReader</li>
<li>Error</li>
<li>ErrorCollection</li>
<li>Exception</li>
<li>Parameter</li>
<li>ParameterCollection</li>
<li>Transaction</li>
</ul>
</li>
</ul>
</li>
</ul>
** Action Plan
<ul>
<li>Bug fixing</li>
<li>Improving API reference documentation</li>
<li>Full testing with Firebird 1.5</li>
<li>Test with Mono ( http://www.go-mono.com )
<ul>
<li>Status : Started</li>
</ul>
</li>
<li>Support for array datatype
<ul>
<li>Status : Started</li>
<li>Comments: See Interbase API reference documentation</li>
<li>Add new file FbArray.cs for array fields management</li>
</ul>
</li>
<li>Support for Stored Procs calls that have returns values
<ul>
<li>Status : Pending.</li>
<li>Comments: Modify the isc_dsql_prepare method of GDS implementation for
allow to return the output parameters.</li>
</ul>
</li>
<li>Implementation of FbClientPermission and FbClientPermissionAttribute
<ul>
<li>Status : Pending</li>
<li>Comments: See if these are really needed for Firebird</li>
</ul>
</li>
<li>Improve Logger implementation
<ul>
<li>Status: Pending</li>
</ul>
</li>
</ul>
** Testing
<ul>
<li>Need a working mono and mcs</li>
<li>Need access to a Firebird Relational Database or you can download
it from <a href="http://firebird.sourceforge.net">here</a></li>
<li>Get the Firebird .NET data provider from here as
<a href="http://lists.sourceforge.net/lists/listinfo/firebird-net-provider">firebird-net-provider</a>. Make
sure the Firebird .NET data provider binary assembly FirebirdSql.Data.Firebird.dll is
installed in the same place as the mono class libraries.</li>
<li>Has a ConnectionString format:
<pre>
"Database=databasefile.gdb;User=user;Password=pass;Dialect=3;Server=hostname"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using FirebirdSql.Data.Firebird;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Database=C:\\PROGRAM FILES\\FIREBIRD\\EXAMPLES\\EMPLOYEE.GDB;" +
"User=SYSDBA;" +
"Password=masterkey;" +
"Dialect=3;" +
"Server=localhost";
IDbConnection dbcon = new FbConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
string sql = "SELECT * FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
object dataValue = myReader.GetValue(0);
string sValue = dataValue.ToString();
Console.WriteLine("Value: " + sValue);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r FirebirdSql.Data.Firebird.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r FirebirdSql.Data.Firebird.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+7
View File
@@ -0,0 +1,7 @@
* The GCC front-end
Jeremy Singer has developed a .NET backend for GCC, his
research work is available <a
href="http://www.cl.cam.ac.uk/~jds31/research/gccnet/">here</a>.
+162
View File
@@ -0,0 +1,162 @@
* Gtk#
<a href="http://gtk-sharp.sourceforge.net">Gtk#</a> (Gtk
sharp) is a set of C# language bindings for the
<a href="http://www.gtk.org">Gtk+</a> toolkit and other
libraries that are part of the
<a href="http://www.gnome.org">GNOME</a> platform .
* Wiki
There is a <a
href="http://www.nullenvoid.com/gtksharp/wiki/index.php/">Gtk#
Wiki</a>. You are encouraged to contribute to it.
** API of Gtk#
The Gtk# API is documented using the ECMA XML document format, you can read
more about it <a href="documentation.html">here</a>. You can
also use the MonoDoc tool that ships with Gtk# documentation.
** Where to learn more.
Visit the official site for the <a href="http://gtk-sharp.sourceforge.net">Gtk# Project</a>.
The <a href="http://www.go-mono.org/faq">Mono FAQ</a> has some useful
information too.
** GTK# On Linux
<p>Where to get distributions of GTK# for Linux:
<ul>
<li><a href="http://gtk-sharp.sourceforge.net">RPMs</a></li>
<li><a href="http://www.debianplanet.org/mono/">Debs</a></li>
</ul>
<p>Buidling on Linux:
<ul>
<li>Get GTK# source from <a href="http://gtk-sharp.sourceforge.net">Gtk# Project</a>.</li>
<li>run ./autogen.sh --prefix=my_mono_installation_prefix</li>
<li>make</li>
<li>make install</li>
</ul>
** GTK# On Windows
<p>Look at our Wiki for installation instructions <a href="http://www.nullenvoid.com/gtksharp/wiki/index.php/InstallingBeginnersGuide">here</a>
<p>If you want to build GTK# yourself on Windows:
<p>To build gtk# under windows, you will need the following:
<ul>
<li>cygwin from <a href="http://www.cygwin.com/">here</a> When installing Cygwin via setup.exe,
by default binutils and other tools do not get installed; you have to make
sure to select these items. Just make
sure Base and Development are set to Install.</li>
<li>Mono 0.17 or later from <a href="http://www.go-mono.com/download.html">here</a>
You can use Windows Setup Wizard (NT/2000/XP).</li>
<li>GTK+ 2.0 (and dependencies). You can obtain gtk+ 2.0 by either of the
following:
<ul>
<li>You can get a Windows Installer at:
<a href="http://www.dropline.net/jade/download.html">here</a> </li>
<li>or get the separate binary and dev/lib packages at
at <a href="http://www.gimp.org/~tml/gimp/win32/downloads.html">here</a> </li>
<li>or binary package from Dev-C++ site <a href="http://www.bloodshed.net/dev/packages/gtk.html">here</a> </li>
<li>or get Gtk4Win <a href="http://wingtk.sourceforge.net/index.html">here</a> </li>
<li>or the source at <a href="http://www.gtk.org/">here</a> </li>
</ul>
</li>
<li>binary distriubtion of a current web browser
like Internet Explorer 4.0, Mozilla 1.0, or Netscape 7.0 which
includes things like msvcrt.dll.</li>
<li>Microsoft .NET Framework at
<a href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/000/976/msdncompositedoc.xml&frame=true">here</a> </li>
<p>If you are running Windows 95/98/ME, then you will need Unicode support.
Look in
mono-list archives for information about how to get
Mono to work on Windows 9x.
<a href="http://lists.ximian.com/archives/public/mono-list/2002-December/004158.html">here</a>
<p>Environment Variables to set:
<ul>
<li>PATH - set to your mono installation bin and lib path.
For example, my mono installation prefix is:
<pre>
F:/cygwin/home/DanielMorgan/mono/install
</pre>
<p>So, I would set my PATH in the Windows Control Panel as:
<pre>
F:/cygwin/home/DanielMorgan/mono/install/bin;F:/cygwin/home/DanielMorgan/mono/install/lib</li>
</pre>
</li>
<li>LD_LIBRARY_PATH - set to your mono installation lib path</li>
<li>PKG_CONFIG_PATH - set to your mono installation lib/pkgconfig path, such
as,
<pre>
F:/cygwin/home/DanielMorgan/mono/install/lib/pkgconfig</li>
</pre>
<p>If you got the gtk-sharp source, cd to the gtk-sharp directory, type:
<pre>
./autogen.sh --prefix=~/mono/install
</pre>
<p>Set your --prefix= to whatever your mono installation prefix is located.
This will take awhile to go through the ./autogen.sh and ./configure...
<p>After that it finishes succesfully, you run make with the makefile.win32
like:
<pre>
make -f makefile.win32
</pre>
<p>After that finishes succesfully, you can copy to your mono installation lib
path like:
<pre>
cp */*.dll ~/mono/install/lib
</pre>
</ul>
<p>The pkg-config files for
gtk+ 2.0 and dependencies will need to be set correctly if they haven't
already been.
<p>Look in your mono installation/lib/pkgconfig, such as,
<pre>
F:/cygwin/home/DanielMorgan/mono/install/lib/pkgconfig
</pre>
<p>You will find files like: gtk+-2.0.pc
<p>Edit the line that says
<pre>
prefix=something
</pre>
<p>And set it to your mono installation prefix, such as,
<pre>
prefix=F:/cygwin/home/DanielMorgan/mono/install
</pre>
<p>Do this for all the .pc files in that directory. If there are not any, then
you will need to create them. Or get them from somewhere like the dev
packages at
<a href="http://www.gimp.org/~tml/gimp/win32/downloads.html">here</a>
** GTK# On FreeBSD
TODO. Any volunteers?
** GTK# On Solaris
TODO. Any volunteers?
** GTK# On AIX
TODO. Any volunteers?
+39
View File
@@ -0,0 +1,39 @@
* Mono Hackers Hall Of Fame
Without the help, the skills and the time of many passionate developers outside of
the Ximian Mono team, Mono would not be where it is today.
Many of them do it for fun, some do it because they really want a nice CLR they
can hack on, some do it because they need a working solution to some development
issues and mono is the ideal tool for the job.
Some of them may start contributing because they want a mention in the
<b>Mono Hackers Hall Of Fame</b>! Whatever the cause, join us in a big<br>
<h1 align="center">Thank you!</h1>
* Mono Hackers
** Zoltan Varga
Zoltan has contributed significantly to Mono, with bug reports and bug
fixes as well as pushing the envelope of the things that can be done in
and with the mono runtime: the gcc-based ngen compiler, code coverage
and more recently his work with Reflection.Emit that got mono to the
point of running the IKVM Java virtual machine.
** Sergey Chaban
Sergey has been a long time contributor to the project, from the early
work on the class libraries that were critical to Mono's origin: every
time you use a Hashtable in Mono, it runs Sergey's code, to the
low-level optimizations on the JIT engine and to his work on ILASM and
the PEToolkit. And countless other things.
** Nick Drochak
The first, deserved, entry in the <b>Mono Hackers Hall Of Fame</b> is for
Nick Drochak, who joined us in the first days of Mono and built the testing
infrastructure for the C# assemblies, fixed tons of bugs and even adventured
himself in the lands of the C runtime. His work is invaluable for keeping
Mono on the right track through the daily changes in the codebase.
Executable
+157
View File
@@ -0,0 +1,157 @@
* IBM DB2 Data Provider
<ul>
<li>ADO.NET Data Provider for <a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a></li>
<li>Exists in namespace DB2ClientCS and assembly Mono.Data.DB2Client</li>
<li>The source code exists at mcs/class/Mono.Data.DB2Client</li>
<li>Requires the Call Level Interface to IBM DB2 shared library. This
is db2cli.dll on Windows. The IBM DB2 CLI API is very similar to the ODBC API. If
you take a look at Mono's <a href="http://www.go-mono.com/odbc.html">System.Data.Odbc</a> ODBC provider, you will see the
DllImport's have similiar function names.</li>
<li>IBM DB2 Provider created by Christopher Bockner.</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Compiles on Windows and Linux. Works on Windows. Still needs to be tested on Linux.</li>
<li>Able to connect to IBM DB2</li>
<li>Able to execute DML, such as, CREATE TABLE via ExecuteNonQuery()</li>
<li>Christopher says it can retrieve data via the DB2ClientDataReader</li>
</ul>
** Action Plan
<ul>
<li>Still needs work to get it to retrieve data via ExecuteReader() and
use the data reader to read data.</li>
</ul>
** Testing
In order to test.
<ul>
<li>Have working mono and mcs setup</li>
<li>Have access to an IBM DB2 database. If you do not have access, download the
<a href="http://www-3.ibm.com/software/data/db2/">IBM DB2</a> software. There
are versions for Windows, Linux, AIX, and Sun Solaris.</li>
<li>Make sure the assembly Mono.Data.DB2Client.dll was built and installed
where the other class libraries are installed.</li>
<li>If you do not have the source to mcs, get the source from
<a href="http://www.go-mono.com/download">here</a></li>
<li>Has a ConnectionString format like ODBC</li>
<li>Here is a ConnectionString format if you have a DSN setup:
<pre>
"DSN=dataSetName;UID=myuserid;PWD=mypassword"
</pre>
</li>
<li>Here is a ConnectionString format if you do not have a DSN (have not
gotten this to work though, so, I am open to suggestions):
<pre>
"DRIVER={DB2 Driver};SERVER=localhost;DATABASE=test;UID=myuserid;PASSWORD=mypassword"
</pre>
</li>
<li>In mcs/class/Mono.Data.DB2Client/Test/DBConnTest, you will find
a DBConnTest.cs.</li>
<li>To build DBConnTest:
<ul>
<li>On Unix:</li>
<pre>
mcs DBConnTest.cs -r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
<li>On Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe DBConnTest.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
<li>To run it on mono:
<pre>
mono DBConnTest.exe database userid password
</pre>
</li>
</ul>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.DB2Client;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"DSN=sample;UID=db2admin;PWD=mypass";
IDbConnection dbcon = new DB2ClientConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"CREATE TABLE mono_db2_test1 ( " +
" testid varchar(2), " +
" testdesc varchar(16) " +
")";
dbcmd.CommandText = sql;
dbcmd.ExecuteNonQuery();
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.DB2Client.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+97
View File
@@ -0,0 +1,97 @@
* Ideas
There are many pending classes that need to be implemented. Those have
the highest impact in the Mono project: the sooner they are done,
the sooner we can start using this platform to create new and
exciting applications.
That being said, if you are not very excited about working on class
libraries, here is a list of other related projects or tools that might
be useful to the Mono project.
Here are a few ideas of tools, classes and projects that you
could start. More are forthcoming.
<a name="runtime">
** Runtime
We need a verifier that can be run on an executable (assembly)
and tells whether the metadata for the executable is correct
or not. It should report any anomalies.
For a list of anomalies in assemblies, check the various assertions
that are described on the ECMA documentation.
This will help test our generated executables and can be also
used as an external verifier.
<a name="classes">
** Classes
<ul>
TODO=jxta,The JXTA Peer to Peer foundation
* Implement a JXTA protocol implementation:
<a href="http://www.jxta.org">http://www.jxta.org</a>
TODO=camel,Mail API
* Implement a Mail API, similar to Camel or JavaMail (Camel has
significant architecture features that are required on a real
mailer).
You can check the current C
<a href="http://cvs.gnome.org/bonsai/rview.cgi?dir=evolution%2Fcamel">
Camel implementation</a>.
Such an implementation could be used both with
Microsoft .NET and Mono.
TODO=multimedia
* Interfacing to Multimedia systems. You might want
to look into the Quicktime API. I know <a
href="mailto:[email protected]">Vladimir</a> has
researched the problem before
</ul>
<a name="projects">
** Projects
This list of projects ideas is outdated
TODO=guavac,Java compiler for .NET
* You could take one of the existing Java compilers
(Guavac comes to mind as it is so nice) and modify
it to generate .NET code rather than JVM byte
codes.
This should be a pretty straightforward task.
Guavac has the advantage of being written in C++ and
it could be compiled with the Microsoft Managed C++
compiler and produce a .NET executable with it.
TODO=Bonobo,Bonobo for Mono
* Once <a href="http://remoting-corba.sourceforge.net/">CORBA</a> is done, implement the Bonobo interfaces
to allow people to use Bonobo components in Mono and
Mono components with Bonobo. The best of both worlds!
TODO=moniker,Object Naming System with Monikers
* A naming space for Mono. An object naming space is
a very powerful tool. Bonobo implements a moniker
system that is more powerful than the original
moniker concept that was pioneered by COM/OLE in the
Microsoft world.
Our implementation builds on a concept, and we have
made it simpler, more powerful, more extensible and
a much better mechanism than the equivalent monikers
on Windows.
Implementing Mono monikers would benefit both
Windows users using .NET and Mono users on Unix and
Windows.
Here is <a
href="http://primates.ximian.com/~miguel/monikers.html">an
overview of the moniker system</a> in Bonobo.
</ul>
+1289
View File
File diff suppressed because it is too large. Load diff
Executable
+66
View File
@@ -0,0 +1,66 @@
* Java
<b>This is an outline on how to support Java, actual
implementations of ideas like this can be found <a href="http://radio.weblogs.com/0109845/">here</a></b>
It would be interesting to support the Java language as part
of the Mono project.
You have to think of Java as various pieces: Java the
language and Java the virtual machine.
It is possible to compile Java to .NET, as shown by the
Microsoft J# compiler. We could then allow the migration of
Java applications to the Mono runtime.
** Native compiler
Although a native compiler can be built, and probably should be
built using an existing compiler, a short term solution is to
build a translator from Java class files to the ECMA CIL images.
This has the advantage that we can use an existing and tested
Java compiler to generate the code, and then we can use an automated
code compiler that compiles Java VM bytecodes to CIL bytecodes.
** The translator.
It would be interesting to write a semantic translator that
converts java byte codes into CIL opcodes. This is possible
because the Java byte codes are a subset of the CIL ones.
A semantic tree needs to be constructed (very much in the
spirit of what is done in mono_analize_stack in
<tt>mono/mono/jit/jit.c</tt>. Once such a semantic tree is
constructed, we could generate the equivalent Java code.
This has a number of interesting side effects: people can
continue to use their existing Java compilers to compile their
code, and a simple tool that converts their .class files into
a .NET assembly can be used.
** Libraries
We could translate the GNU Classpath libraries with the above
tools to provide the Java runtime required to host into the
Mono runtime. Some special treatment would be required for
core data types like integers, arrays and strings, and of
course reuse where possible existing classes from .NET to make
them compatible.
** JILC - Java to IL Compiler
This is an attempt to make the java bytecode available for the
.NET environment.
The project attempts to generate the IL code / bytecode from the
compiled java class files. It has reached the stage of code-generation.
The issues that needs to be addressed is the mapping of java objects
to the IL objects, eg: java.lang.String to System.String.
Gaurav Vaish and Abhaya Agarwal are currently leading this project.
The project is currently hosted at <a href="http://sourceforge.net/projects/jilc">SourceForge.Net</a>.
The official home page of the project is
<a href="http://jilc.sourceforge.net">http://jilc.sourceforge.net</a>.
+41
View File
@@ -0,0 +1,41 @@
* Debugging information
Compile your programs using the `-g' flag in MCS, that will all a special
resource containing debugging information to your executable.
To get stack traces with line number information, you need to run your
program like this:
<b>
mono --debug program.exe
</b>
Notice that the program will need to be compiled with the -g
flag and that running with --debug will slow down the execution.
* Mono Debugger
The Mono debugger is written in C# and can debug both managed
and unmanaged applications, support for multiple-threaded
applications and should be relatively easy to port to new
platforms.
Details of the release are available in <a
href="http://lists.ximian.com/archives/public/mono-list/2003-January/011415.html">post</a>.
The debugger contains both Gtk# and command line interfaces.
The debugging file format used in Dwarf (its already supported
by our class libraries and the Mono C# compiler; To debug C
applications, you need a recent GCC, or to pass the -gdwarf-2
flag to gcc).
The debugger is available now, you can get it from <a
href="http://primates.ximian.com/~martin/debugger/mono-debugger-0.2.0.tar.gz">here</a>
Executable
+161
View File
@@ -0,0 +1,161 @@
* Compilers for other languages
Here are some other free compilers for other languages that
target .NET and should work with Mono with no problem:
<ul>
* <a href="#ComponentPascal">Component Pascal</a>
* <a href="#MonoLogo">MonoLogo</a>
* <a href="#Oberon">Oberon</a>
* <a href="#Forth">Forth</a>
* <a href="#mbas">Mono Basic</a> (Mono's VB.NET compiler)
* <a href="#dotlist">dotLisp</a>
</ul>
Languages which are known to run, but we have not done a
complete ran of all their regression tests to validate it:
<ul>
* Kylix.NET.
</ul>
Languages we would like to have supported, with links to resources:
<ul>
* <a href="#JavaScript">Java Script</a>
* <a href="#java.html">Java</a>
* <a href="#c">C</a>
</ul>
Some experimental languages:
<ul>
* <a href="#Tachy">Tachy</a> (scheme-like)
* <a href="#python">Python</a>
</ul>
<a name="Java">
** Java
There is a very interesting project to make a JavaVM for .NET
<a href="http://radio.weblogs.com/0109845/">here</a>.
Zoltan has got IKVM to work with Mono.
<a name="PHP">
** PHP
Sterling has code to allow PHP developers to use Mono code, in
his <a href="http://www.php.net/~sterling/mono/">site</a>
<a name="MonoLogo">
** MonoLogo
An implementation of Logo for Mono (and .NET)
The <A href="http://monologo.sf.net">Mono Logo</a> compiler is
hosted in the <a href="ccvs.html">Mono CVS</a> repository
and also available on the <a href="anoncvs.html">AnonCVS</a> mirrors.
<a name="mbas">
** Mono Basic (Mono's VB.NET compiler)
Work has resumed on the Mono Visual Basic compiler (currently
called mbas). It is part of the standard Mono distribution,
but its still an early compiler.
<a name="Oberon">
** Oberon
This Oberon compiler is written in Oberon.NET (another self
hosting compiler).
The main site <a href="http://www.oberon.ethz.ch/oberon.net/">http://www.oberon.ethz.ch/oberon.net/</a>
Download:
<a href="http://www.oberon.ethz.ch/oberon.net/download/">http://www.oberon.ethz.ch/oberon.net/download/</a>
Examples:
<a href="http://www.oberon.ethz.ch/oberon.net/examples/">http://www.oberon.ethz.ch/oberon.net/examples/</a>
<a href="http://www.superin.formativ.net/mono/oberon/oberon.zip">http://www.superin.formativ.net/mono/oberon/oberon.zip</a>
<a name="ComponentPascal">
** Component Pascal
The Component Pascal compiler: <a
href="http://www.citi.qut.edu.au/research/plas/projects/cp_files/cpnet.html">Home
Page</a>, you can <a
href="http://www.citi.qut.edu.au/research/plas/projects/cp_files/cpdownload.html">
download it</a>
<a name="Forth">
** Delta Forth
The Delta Forth.NET project: <a
href="www.dataman.ro/dforth">Home
Page</a> and <a href="http://www.dataman.ro/dforth/index.html">more
details here</a>.
<a name="Tachy">
** Tachy
A subset of Scheme language called <a
href="http://radio.weblogs.com/0101156/stories/2002/03/19/tachy.html">Tachy</a>
<a name="Python">
** Python
<a href="mailto:[email protected]">Brian Lloyd</a> is
working on linking the Python runtime with the .NET runtime.
More information on the PS.NET project can be found <a
href="http://www.zope.org/Members/Brian/PythonNet/index_html">here</a>.
An FAQ document is available <a
href="http://www.zope.org/Members/Brian/PythonNet/FAQ.html">here</a>.
<a name="dotlisp">
** dotLisp
DotLisp is available from: <a
href="http://sourceforge.net/projects/dotlisp/">http://sourceforge.net/projects/dotlisp/</a>
<a name="JavaScript">
* Java Script
Cesar is working on Mono's implementation of JScript, the code
is available on CVS on module `mcs'.
* Missing languages
Here is a list of a few languages that we would like to see
supported. We will try to maintain a set of links here with
technical information for those interested in porting,
implementing or adapting a compiler for any of these
languages:
<a name="c">
* C
Ideally GCC could be modified to generate CIL, but it is a
big task. That would give us various compilers in one pass.
<a href="http://www.cs.princeton.edu/software/lcc">LCC</a> 4.2
has been recently released. This release adds support for compiling
ANSI C programs to CIL. Note that the CIL support only works on Win32
right now, but should be easy to convert to Mono/other architectures.
LCC is not an open source compiler, but it is free as long as you
do not profit from selling it.
<a name="Java">
* Java
Java bytecode can run directly on Mono using the <a
href="http://www.ikvm.net">IKVM</a> java virtual machine for
.NET.
We have a <a href="java.html">separate page</a> for Java.
+262
View File
@@ -0,0 +1,262 @@
* Mailing Lists
Most of the mailing lists are in english, but there is also
Mono Hispano that has lists in Spanish. <a
href="http://www.monohispano.org/mailman/listinfo/mono-hispano">Mono Hispano list</a>
There are a number of mailing lists for Mono in English:
<table border=1>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-announce-list">mono-announce-list</a></b>
</td>
<td>
Announcements of Mono developments.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-list">mono-list</a></b>
</td>
<td>
The general Mono discussion list.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-devel-list">mono-devel-list</a></b>
</td>
<td>
A mailing list specifically dedicated to discussions
about developing Mono and programming *with* Mono.
Programmers that work on Mono are _strongly_ encouraged
to join this list. Third-party programmers interested
in running or compiling their managed applications with
Mono or that are interested in using mono-specific
technologies should join the list as well.
<p>
Examples of on-topic arguments are:
<ul>
<li>proposals and patches for new features for the mono runtime and programs
<li>discussions about bugs in the mono runtime and programs
<li>discussions about future directions
<li>embedding API, scripting language bridges
<li>mono/mcs build issues
<li>programming with mono-specific assemblies
<li>discussions about third-party compilers that target and/or use directly the CLR
<li>discussions about getting a managed application run with mono
</ul>
<p>Topics that are better discussed on other mailing lists:
<ul>
<li> general C# questions (use the specific lists at develop.com)
<li> issues that are already covered by a more specific mono
mailing list (like System.Windows.Forms or Gtk#)
<li> success reports about new apps running on mono, including
runtime/buildtime support for new programming languages (use
mono-list to reach a wider audience)
</ul>
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-gc-list">mono-gc-list</a></b>
</td>
<td>
Discussion on the GC system of Mono.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-patches">mono-patches</a></b>
</td>
<td>
Track the CVS activity of Mono on this mailing list (patches are sent to recipients). <p>
You can get <a href="http://www.go-mono.com/snapshots">daily snapshots</a> as well.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-cvs-list">mono-cvs-list</a></b>
</td>
<td>
Track the CVS activity of Mono on this mailing list.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mono-docs-list</a></b>
</td>
<td>
Discussion on the documentation of Mono.
</td>
</tr>
<tr>
<td>
<b><a href="http://lists.ximian.com/mailman/listinfo/mono-bugs">mono-bugs</a></b>
</td>
<td>
This mailing list is used to keep track of the bugs in Mono as reported
in <a href="http://bugzilla.ximian.com">Bugzilla.ximian.com</a>
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-winforms-list">mono-winforms-list</a></b>
</td>
<td>
Used to discuss the Windows.Forms implementatation for Mono using Wine.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/gtk-sharp-list">gtk-sharp-list</a></b>
</td>
<td>
Used to discuss the Gtk bindings for Mono (<a href="http://gtk-sharp.sf.net">Gtk#</a>).
</td>
</tr>
</table>
Other mailing lists of interest:
<ul>
* <b><a
href="http://discuss.develop.com/dotnet.html">Dotnet mailing
list at Develop.com:</a></b> The guys at Develop Mentor run
this general purpose mailing list.
</ul>
</ul>
* Alternative archive site
An alternate site that archives Mono List is available <a
href="http://archive.neotonic.com/archive/mono-list">http://archive.neotonic.com/archive/mono-list</a>
* Google search of the archives
<!-- Google Search with mods -->
<center>
<table>
<tr>
<td><a href="http://www.google.com/search"><img src="mailing-lists_files/Logo_40wht.gif" border="0" alt="Google" align="middle"></a></td>
<td>
<table>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face="arial,sans-serif" size="-1"><input type="hidden" name="domains" value="www.go-mono.com;lists.ximian.com"><br><input type="radio" name="sitesearch" value="www.go-mono.com"> Search www.go-mono.com <input type="radio" name="sitesearch" value="lists.ximian.com"> Search lists.ximian.com </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-announce-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>announce-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-bugs">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>bugs</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-gc-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>gc-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-cvs-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>cvs-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-patches">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>patches</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
</table>
</tr>
</table>
</center>
<!-- /Google Search with mods -->
+54
View File
@@ -0,0 +1,54 @@
* mbas: Mono's Basic.NET Compiler.
MBAS is a CIL compiler for the Visual Basic language, an extended
version of VisualBasic.NET. It's based on the MCS compiler
and still in heavy development, though many language features are
already supported.
** What works
<ul>
* Classes, Fields and Methods. Properties are still
being worked on.
* Module definition and Sub functionality (TODO: Function's)
* Namespace Import, so can you reference, instantiate
and call external assemblies
* Parameter passing between Sub's. ByVal and ByRef
parameters are being worked on.
* Delegates
* Object creation
* Events - to a limited extent. You can declare a
Class-Field as 'WithEvents' and dynamic events (i.e
AddHandler MyButton.Click, Button1_OnClick). Please
beware: just after committing the code, I discovered
that the handler field in the AddHandler call is
case-sensitive, a remnant of mBas' mcs heritage)
* Statements supported are 'If..Then..Else' ,
'While..End While' and assignment statements. Simple
operators (+, -, *, /, >, <, =) should also
work. Other statements (For..Next, etc.) should be
quite trivial to implement.
</ul>
A lot of this stuff is implemented rebuilding proper expressions and
statements on top of the classes provided by mcs (look at the grammar -
mb-parser.jay - and compare it with cs-parser.jay, if interested).
** TODO-list
At this stage almost every element of the language must be still checked for
conformance to MS'implementation. Help is particularly needed for those areas
I know little of (mcs internals are still quite obscure to me). I'd like to
implement class properties, the missing statements, exception handling,
structures and actual event support (not necessarily in this order). Once we
have all this stuff set up and reasonably bug-free, more work could be done
on helper functions and Object-vars handling.
+34
View File
@@ -0,0 +1,34 @@
* Mono for beginners
Hinne Hettema and Jaime Anguiano Olarra are providing us with
nice and complete set of documents (HOWTOs) about how to install,
configure, run and test the software developed by the Mono Project.
You can read them online, get PDF versions or get the XML sources.
HTML Format (read it online)
For <a href="mono-beginning/t1.html">RPM Linux based systems</a>
For <a href="http://monoevo.sourceforge.net/mono-windows/mono-beginning-windows/t1.html">Microsoft Windows</a>
PDF Format
For <a href="mono-beginning.pdf">RPM Linux based systems</a>
XML Source
For <a href="mono-beginning.xml">RPM Linux based systems</a>
For <a href="http://monoevo.sourceforge.net/mono-windows/mono-beginning-windows.xml">Microsoft Windows</a>
Currently Hinne is working on a Mono Tools HOWTO. Which will be
very useful for the hackers that would like to get in touch with
Mono and Jaime is working out a Mono Beginning HOWTO for Debian
users.
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
+186
View File
@@ -0,0 +1,186 @@
#!/bin/bash
# Script to automate the building of mono and its dependencies on
# cygwin. Relies on wget being installed (could make it fall back to
# using lynx, links, w3, curl etc), assumes that gcc, make, tar,
# automake, etc are already installed too (may be worth testing for
# all that right at the top and bailing out if missing/too old/too new
# etc).
# See where we are. This will become the top level directory for the
# installation, unless we are given an alternative location
here=$1
test -z "$here" && here=`pwd`
echo "Building Mono and dependencies in $here, installing to $here/install"
PATH=$here/install/bin:$here/install/lib:$PATH
# Make sure cygwin's libiconv is installed, or libtool blows its tiny mind
if [ ! -f /usr/lib/libiconv.la ]; then
echo "You need to install the cygwin \"libiconv\" package!"
exit -1
fi
# Check mono out first, so we can run aclocal from inside the mono dir (it
# needs to see which version of the real aclocal to run)
test -z "$CVSROOT" && CVSROOT=:pserver:[email protected]:/mono
export CVSROOT
echo "Updating mono"
# cvs checkout does the same as cvs update, except that it copes with
# new modules being added
# Older versions of cvs insist on a cvs login for :pserver: methods
# Make sure cvs is using ssh for :ext: methods
if [ ${CVSROOT:0:5} = ":ext:" ]; then
CVS_RSH=ssh
export CVS_RSH
elif [ ${CVSROOT:0:9} = ":pserver:" ]; then
if ! grep $CVSROOT ~/.cvspass > /dev/null 2>&1 ; then
echo "Logging into CVS server. Anonymous CVS password is probably empty"
cvs login || exit -1
fi
fi
cvs checkout mono || exit -1
echo "Checking automake version"
automake_required="1.6.2"
automake_version=`automake --version | head -1 | awk '{print $4}' | tr -d '[a-zA-Z]' | sed 's/-.*$//g'`
echo "Found automake version $automake_version"
if expr $automake_version \< $automake_required > /dev/null; then
echo "Your automake is too old! You need version $automake_required or newer."
exit -1
else
echo "Automake version new enough."
fi
# Select the stable version anyway...
if [ ! -z "${AUTO_STABLE}" -o -e /usr/autotool/stable ]; then
export AUTO_STABLE=${AUTO_STABLE:-/usr/autotool/stable}
export AUTO_DEVEL=${AUTO_STABLE}
fi
# Need to install pkgconfig and set ACLOCAL_FLAGS if there is not a
# pkgconfig installed already. Otherwise set PKG_CONFIG_PATH to the
# glib we're about to install in $here/install.
# --print-ac-dir was added in 1.2h according to the ChangeLog. This
# should mean that any automake new enough for us has it.
# This sets ACLOCAL_FLAGS to point to the freshly installed pkgconfig
# if it doesnt already exist on the system (otherwise auto* breaks if
# it finds two copies of the m4 macros). The GIMP for Windows
# pkgconfig sets its prefix based on the location of its binary, so we
# dont need PKG_CONFIG_PATH (the internal pkgconfig config file
# $prefix is handled similarly). For the cygwin pkgconfig we do need to
# set it, and we need to edit the mingw pc files too.
function aclocal_scan () {
# Quietly ignore the rogue '-I' and other aclocal flags that
# aren't actually directories...
#
# cd into mono/ so that the aclocal wrapper can work out which version
# of aclocal to run, and add /usr/share/aclocal too cos aclocal looks there
# too.
for i in `(cd mono && aclocal --print-ac-dir)` /usr/share/aclocal $ACLOCAL_FLAGS
do
if [ -f $i/$1 ]; then
return 0
fi
done
return 1
}
function install_package() {
zipfile=$1
markerfile=$2
name=$3
echo "Installing $name..."
if [ ! -f $here/$zipfile ]; then
wget http://www.go-mono.com/archive/$zipfile
fi
# Assume that the package is installed correctly if the marker
# file is there
if [ ! -f $here/install/$markerfile ]; then
(cd $here/install || exit -1; unzip -o $here/$zipfile || exit -1) || exit -1
fi
}
# pkgconfig is only used during the build, so we can use the cygwin version
# if it exists
if aclocal_scan pkg.m4 ; then
install_pkgconfig=no
else
install_pkgconfig=yes
fi
# But we still need to use the mingw libs for glib & co
ACLOCAL_FLAGS="-I $here/install/share/aclocal $ACLOCAL_FLAGS"
export PATH
export ACLOCAL_FLAGS
# Grab pkg-config, glib etc
if [ ! -d $here/install ]; then
mkdir $here/install || exit -1
fi
# Fetch and install pkg-config, glib, iconv, intl
if [ $install_pkgconfig = "yes" ]; then
install_package pkgconfig-0.11-20020310.zip bin/pkg-config.exe pkgconfig
else
echo "Not installing pkgconfig, you already seem to have it installed"
fi
install_package glib-2.0.4-20020703.zip lib/libglib-2.0-0.dll glib
install_package glib-dev-2.0.4-20020703.zip lib/glib-2.0.lib glib-dev
install_package libiconv-1.7.zip lib/iconv.dll iconv
install_package libintl-0.10.40-20020101.zip lib/libintl-1.dll intl
install_package libgc-dev.zip lib/gc.dll gc-dev
if [ $install_pkgconfig = "no" ]; then
echo "Fixing up the pkgconfig paths"
for i in $here/install/lib/pkgconfig/*.pc
do
mv $i $i.orig
sed -e "s@^prefix=/target\$@prefix=$here/install@" < $i.orig > $i
done
export PKG_CONFIG_PATH=$here/install/lib/pkgconfig
fi
# Needed to find the libgc bits
CPPFLAGS="$CPPFLAGS -I$here/install/include"
LDFLAGS="$LDFLAGS -L$here/install/lib"
export CPPFLAGS
export LDFLAGS
# Make sure we build native w32, not cygwin
#CC="gcc -mno-cygwin"
#export CC
# --prefix is used to set the class library dir in mono, and it needs
# to be in windows-native form. It also needs to have '\' turned into
# '/' to avoid quoting issues during the build.
prefix=`cygpath -w $here/install | sed -e 's@\\\\@/@g'`
# Build and install mono
echo "Building and installing mono"
(cd $here/mono; ./autogen.sh --prefix=$prefix || exit -1; make || exit -1; make install || exit -1) || exit -1
echo ""
echo ""
echo "All done."
echo "Add $here/install/bin and $here/install/lib to \$PATH"
echo "Don't forget to copy the class libraries to $here/install/lib"
+254
View File
@@ -0,0 +1,254 @@
#! /usr/bin/env bash
# Script to automate the building of mono and its dependencies.
# Relies on wget being installed (could make it fall back to using
# lynx, links, w3, curl etc), assumes that gcc, make, tar, automake,
# etc are already installed too (may be worth testing for all that
# right at the top and bailing out if missing/too old/too new etc).
# See where we are. This will become the top level directory for the
# installation, unless we are given an alternative location
here=$1
test -z "$here" && here=`pwd`
echo "Building Mono and dependencies in $here, installing to $here/install"
PATH=$here/install/bin:$PATH
LD_LIBRARY_PATH=$here/install/lib:$LD_LIBRARY_PATH
# Find a tool to fetch files. It must take an HTTP URL on the command line and
# save the file in the current directory. (It must also talk HTTP/1.1, which
# rules out BSD's ftp(1), at least on FreeBSD 4.4.)
viable_downloaders="wget fetch"
for i in $viable_downloaders
do
if which $i > /dev/null; then
downloader=`which $i`
break
fi
done
if [ -z "$downloader" ]; then
echo "Can't find a commandline download tool (tried: $viable_downloaders)"
exit -1
else
echo "Using $downloader to fetch files"
fi
# We need to prefer GNU make if there's a choice. BSD make falls over in
# the glib build if gtk-doc is disabled.
viable_makers="gmake make"
for i in $viable_makers
do
if which $i > /dev/null; then
MAKE=$i
break
fi
done
if [ -z "$MAKE" ]; then
echo "Can't find a make tool (tried: $viable_makers)"
exit -1
else
echo "Using $MAKE"
export MAKE
fi
# Need to install pkgconfig and set ACLOCAL_FLAGS if there is not a
# pkgconfig installed already. Otherwise set PKG_CONFIG_PATH to the
# glib we're about to install in $here/install. This script could
# attempt to be clever and see if glib 2 is already installed, too.
# --print-ac-dir was added in 1.2h according to the ChangeLog. This
# should mean that any automake new enough for us has it.
function aclocal_scan () {
# Quietly ignore the rogue '-I' and other aclocal flags that
# aren't actually directories...
for i in `aclocal --print-ac-dir` $ACLOCAL_FLAGS
do
if [ -f $i/$1 ]; then
return 0
fi
done
return 1
}
function pkgconfig_scan () {
module=$1
echo "Finding pkgconfig files for $module..."
# Should we use locate? or just a list of well-known directories?
# locate has the problem of false positives in src dirs
for i in /usr/lib/pkgconfig /usr/local/lib/pkgconfig
do
echo "Looking in $i..."
if [ -f $i/${module}.pc ]; then
echo $i
return
fi
done
}
function install_package() {
tarfile=$1
dirname=$2
name=$3
configure_options=$4
echo "Installing $name..."
if [ ! -f $here/$tarfile ]; then
(cd $here && $downloader http://www.go-mono.com/archive/$tarfile)
fi
# Assume that the package built correctly if the dir is there
if [ ! -d $here/$dirname ]; then
# Build and install package
(cd $here && tar xzf $tarfile) || exit -1
(cd $here/$dirname; ./configure --prefix=$here/install $configure_options || exit -1; $MAKE || exit -1; $MAKE install || exit -1)
success=$?
if [ $success -ne 0 ]; then
echo "***** $name build failure. Run rm -rf $here/$dirname to have this script attempt to build $name again next time"
exit -1
fi
fi
}
if aclocal_scan pkg.m4 ; then
install_pkgconfig=no
else
install_pkgconfig=yes
fi
if aclocal_scan glib-2.0.m4 ; then
install_glib=no
if [ $install_pkgconfig = "yes" ]; then
# We have to tell the newly-installed pkgconfig about the
# system-installed glib
PKG_CONFIG_PATH=`pkgconfig_scan glib-2.0`:$PKG_CONFIG_PATH
fi
else
install_glib=yes
PKG_CONFIG_PATH="$here/install/lib/pkgconfig:$PKG_CONFIG_PATH"
fi
if [ -f /usr/include/gc/gc.h ]; then
install_libgc=no
else
install_libgc=yes
fi
if [ $install_pkgconfig = "yes" -o $install_glib = "yes" ]; then
ACLOCAL_FLAGS="-I $here/install/share/aclocal $ACLOCAL_FLAGS"
fi
export PATH
export LD_LIBRARY_PATH
export ACLOCAL_FLAGS
export PKG_CONFIG_PATH
# Freebsd puts iconv in /usr/local, so see if we need to add
# /usr/local/include and /usr/local/lib to CPPFLAGS and LDFLAGS. We could
# skip this if it would add /usr/include and /usr/lib, but leaving it
# shouldnt break anything.
#
# Actually, it does break stuff :-( gcc 3.2 prints gratuitous warnings
# and configure fails to find header files because of this cpp output.
if [ ! -f /usr/include/iconv.h ]; then
iconvdirs="/usr/local/include"
for i in $iconvdirs
do
if [ -f $i/iconv.h ]; then
iconvh_dir=$i
break
fi
done
if [ -z "$iconvh_dir" ]; then
echo "Can't find iconv headers (looked in $iconvdirs)"
exit -1
fi
iconvlib_dir=`echo $iconvh_dir | sed -e 's/include/lib/'`
echo "Adding $iconvh_dir to CPPFLAGS"
echo "Adding $iconvlib_dir to LDFLAGS"
CPPFLAGS="$CPPFLAGS -I$here/install/include -I$iconvh_dir"
LDFLAGS="$LDFLAGS -L$here/install/lib -L$iconvlib_dir"
else
CPPFLAGS="$CPPFLAGS -I$here/install/include"
LDFLAGS="$LDFLAGS -L$here/install/lib"
fi
export CPPFLAGS
export LDFLAGS
# Grab pkg-config, glib and libgc if necessary
if [ $install_pkgconfig = "yes" ]; then
install_package pkgconfig-0.8.0.tar.gz pkgconfig-0.8.0 pkgconfig ""
else
echo "Not installing pkgconfig, you already seem to have it installed"
fi
if [ $install_glib = "yes" ]; then
install_package glib-2.0.6.tar.gz glib-2.0.6 glib ""
else
echo "Not installing glib, you already seem to have it installed"
fi
if [ $install_libgc = "yes" ]; then
install_package gc6.1alpha5.tar.gz gc6.1alpha5 libgc "--enable-threads=pthreads"
# make install didnt do the headers!
mkdir -p $here/install/include/gc
cp -r $here/gc6.1alpha5/include/* $here/install/include/gc
else
echo "Not installing libgc, you already seem to have it installed"
fi
# End of build dependencies, now get the latest mono checkout and build that
test -z "$CVSROOT" && CVSROOT=:pserver:[email protected]:/mono
export CVSROOT
echo "Updating mono"
# cvs checkout does the same as cvs update, except that it copes with
# new modules being added
# Older versions of cvs insist on a cvs login for :pserver: methods
# Make sure cvs is using ssh for :ext: methods
if [ ${CVSROOT:0:5} = ":ext:" ]; then
CVS_RSH=ssh
export CVS_RSH
elif [ ${CVSROOT:0:9} = ":pserver:" ]; then
# Chop off the trailing /mono because cvs 1.11 adds the port number
# into the .cvspass line
if ! grep ${CVSROOT%:/mono} ~/.cvspass > /dev/null 2>&1 ; then
echo "Logging into CVS server. Anonymous CVS password is probably empty"
cvs login
fi
fi
(cd $here && cvs checkout mono) || exit -1
# Build and install mono
echo "Building and installing mono"
(cd $here/mono; ./autogen.sh --prefix=$here/install || exit -1; $MAKE || exit -1; $MAKE install || exit -1) || exit -1
echo ""
echo ""
echo "All done."
echo "Add $here/install/bin to \$PATH"
echo "Add $here/install/lib to \$LD_LIBRARY_PATH"
echo "Don't forget to copy the class libraries to $here/install/lib"
+551
View File
@@ -0,0 +1,551 @@
<Mono newbie coders start file>
<h1> A little help for mono newbie coders </h1>
For those who are new to Mono and are impatient to contribute
with code (uhh... you are brave!!) here is the document you
should read.
You will see all Mono hackers say the same (great minds have
similar way of thinking): First, DO WRITE TESTS!!!. In order
to do that:
<ul>
* Start with the NUnit Tests Guidelines. In the cvs
they are located at: mcs/class/doc/NUnitGuideli...
* But wait, this is a document for impatient
people. So EVERYTHING should be here. Well, it is.
</ul>
<h2> The NUnit Tests Guidelines document </h2>
Mono NUnit Test Guidelines and Best Practices
Authors: Nick Drochak <[email protected]>
Martin Baulig <[email protected]>
Last Update: 2002-03-02
Rev: 0.3
<b> Purpose </b>
This document captures all the good ideas people have had
about writing NUnit tests for the mono project. This document
will be useful for anyone who writes or maintains unit tests.
<b> Other resources </b>
- mcs/class/README has an explanation of the build process and
how it relates to the tests.
- http://nunit.sourceforge.net is the place to find out about
NUnit
<b> Getting Started </b>
If you are new to writing NUnit tests, there is a template
you may use to help get started. The file is:
mcs/class/doc/TemplateTest.cs
(2.- This is the point two!. This file is just after the end
of the guidelines. Copy/paste it in another buffer. And keep
reading.)
Save a copy of this file in the appropriate test subdirecty
(see below), and replace all the [text] markers with
appropriate code. Comments in the template are there to guide
you. You should also look at existing tests to see how other
people have written them.
mcs/class/corlib/Test/System.Collections/CollectionBaseTest.cs
is a small one that might help.
(3.- You reached the third point. And as expected, it's just
here to tell you that the content of CollectionBaseTest.cs is
after the TemplateTest.cs code at the end of these
guidelines.)
The directory that will contain your new file depends on the
assembly/namespace of the class for which you are creating the
tests. Under mcs/class there is a directory for each assembly.
In each assembly there is a Test directory, e.g.
mcs/class/corlib/Test. In the Test directory there are
sub-directories for each namespace in the assembly, e.g.
mcs/class/corlib/Test/Sytem. Put your new test file in the
appropriate sub-directory under Test for the class you are
testing.
Once your test class is complete, you need to add it to the
AllTests.cs file in the same directory as your new test. Add a
call to "suite.AddTest()" passing the name of your new test
class's suite property as the parameter. You will see examples
in the AllTests.cs file, so just copy and paste inside there.
Once all of that is done, you can do a 'make test' from the top
mcs directory. Your test class will be automagically included
in the build and the tests will be run along with all the
others.
<b> Tips </b>
<b> Provide an unique error message for Assert() </b>
Include an unique message for each Assert() so that when the
assert fails, it is trivial to locate the failing one.
Otherwise, it may be difficult to determine which part of the
test is failing. A good way to ensure unique messages is to use
something like #A01, #A02 etc.
Bad:
<pre>
AssertEquals("array match", compare[0], i1[0]);
AssertEquals("array match", compare[1], i1[1]);
AssertEquals("array match", compare[2], i1[2]);
AssertEquals("array match", compare[3], i1[3]);
</pre>
Good:
<pre>
AssertEquals("#A01", compare[0], i1[0]);
AssertEquals("#A02", compare[1], i1[1]);
AssertEquals("#A03", compare[2], i1[2]);
AssertEquals("#A04", compare[3], i1[3]);
</pre>
Once you used such a number in an Assert(), don't change it
later on - people might use it it identify the test in bug
reports or in mailing lists.
<b> Use AssertEquals() to compare things, not Assert(). </b>
Never compare two values with Assert() - if the test fails,
people have no idea what went wrong while AssertEquals()
reports the failed value.
Bad:
<pre>
Assert ("A01", myTicks[0] == t1.Ticks);
</pre>
Good:
<pre>
AssertEquals ("A01", myTicks[0], t1.Ticks);
</pre>
<b> Constructors </b>
When writing your testcase, please make sure to provide a
constructor which takes no arguments:
<pre>
public class DateTimeTest : TestCase
{
public DateTimeTest() : base ("[MonoTests.System.DateTimeTest]") {}
public DateTimeTest (string name): base(name) {}
public static ITest Suite
{
get {
TestSuite suite = new TestSuite ();
return suite;
}
}
}
</pre>
<b> Namespace </b>
Please keep the namespace within each test directory
consistent - all tests which are referenced in the same
AllTests.cs must be in the same namespace. Of course you can
use subnamespaces as you like - especially for subdirectories
of your testsuite.
For instance, if your AllTests.cs is in namespace "MonoTests"
and you have a subdirectory called "System", you can put all
the tests in that dir into namespace "MonoTests.System".
<b> Test your test with the microsoft runtime </b>
If possible, try to run your testsuite with the Microsoft
runtime on Windows and make sure all tests in it pass. This is
especially important if you're writing a totally new testcase
- without this check you can never be sure that your testcase
contains no bugs ....
Don't worry if you're writing your test on Linux, other people
can test it for you on Windows.
Sometimes you may discover that a test doesn't show the
expected result when run with the Microsoft runtime - either
because there is a bug in their runtime or something is
misleading or wrong in their documentation. In this case,
please put a detailed description of the problem to
mcs/class/doc/API-notes and do also report it to the list -
we'll forward this to the Microsoft people from time to time
to help them fix their documentation and runtime.
<pre>
-------------------- TemplateTest.cs begins ----------
// this is a template for making NUnit tests. Text enclosed
// in square brackets (and the brackets themselves) should be
// replaced by appropiate code.
// [File Name].cs - NUnit Test Cases for [explain here]
//
// [Author Name] ([Author email Address])
//
// (C) [Copyright holder]
//
// these are the standard namespaces you will need. You may
// need to add more depending on your tests.
using NUnit.Framework;
using System;
// all test namespaces start with "MonoTests." Append the
// Namespace that contains the class you are testing, e.g.
// MonoTests.System.Collections
namespace MonoTests.[Namespace]
{
// the class name should end with "Test" and start with the name
// of the class you are testing, e.g. CollectionBaseTest
public class [Class to be tested]Test : TestCase {
// there should be two constructors for your class. The first
// one (without parameters) should set the name to something
// unique.
// Of course the name of the method is the same as the name of
// the class
public [Constructor]() : base ("[Namespace.Class]") {}
public [Constructor](string name) : base(name) {}
// this method is run before each Test* method is called. You
// can put variable initialization, etc. here that is common to
// each test.
// Just leave the method empty if you don't need to use it.
protected override void SetUp() {}
// this method is run after each Test* method is called. You
// can put clean-up code, etc. here. Whatever needs to be done
// after each test. Just leave the method empty if you don't need
// to use it.
protected override void TearDown() {}
// this property is required. You need change the parameter for
// typeof() below to be your class.
public static ITest Suite {
get {
return new TestSuite(typeof([Classname here]));
}
}
// this is just one of probably many test methods in your test
// class. each test method must start with "Test". All methods
// in your class which start with "Test" will be automagically
// called by the NUnit framework.
public void Test[Something] {
// inside here you will exercise your class and then
// call Assert()
}
}
---------------------- TemplateTest.cs ends --------------
---------------------- CollectionBaseTest.cs begins ------
//
// System.Collections.CollectionBase
// Test suite for System.Collections.CollectionBase
//
// Author:
// Nick D. Drochak II
//
// (C) 2001 Nick D. Drochak II
//
using System;
using System.Collections;
using NUnit.Framework;
namespace MonoTests.System.Collections
{
public class CollectionBaseTest : TestCase
{
public CollectionBaseTest () : base
("System.Collection.CollectionBase testsuite")
{}
public CollectionBaseTest (String name) : base (name)
{}
// We need a concrete class to test the abstract base
// class
public class ConcreteCollection : CollectionBase
{
// These fields are used as markers to test
// the On* hooks.
public bool onClearFired;
public bool onClearCompleteFired;
public bool onInsertFired;
public int onInsertIndex;
public bool onInsertCompleteFired;
public int onInsertCompleteIndex;
public bool onRemoveFired;
public int onRemoveIndex;
public bool onRemoveCompleteFired;
public int onRemoveCompleteIndex;
public bool onSetFired;
public int onSetOldValue;
public int onSetNewValue;
public bool onSetCompleteFired;
public int onSetCompleteOldValue;
public int onSetCompleteNewValue;
// This constructor is used to test OnValid()
public ConcreteCollection()
{
IList listObj;
listObj = this;
listObj.Add(null);
}
// This constructor puts consecutive integers into the list
public ConcreteCollection(int i) {
IList listObj;
listObj = this;
int j;
for (j = 0; j< i; j++) {
listObj.Add(j);
}
}
// A helper method to look at a value in the
// list at a specific index
public int PeekAt(int index)
{
IList listObj;
listObj = this;
return (int) listObj[index];
}
// Mark the flag if this hook is fired
protected override void OnClear() {
this.onClearFired = true;
}
// Mark the flag if this hook is fired
protected override void OnClearComplete()
{
this.onClearCompleteFired = true;
}
// Mark the flag, and save the paramter if
// this hook is fired
protected override void OnInsert(int index,
object value)
{
this.onInsertFired = true;
this.onInsertIndex = index;
}
// Mark the flag, and save the paramter if
// this hook is fired
protected override void OnInsertComplete(int index,
object value)
{
this.onInsertCompleteFired = true;
this.onInsertCompleteIndex = index;
}
// Mark the flag, and save the paramter if this hook
// is fired
protected override void OnRemove(int index,
object value)
{
this.onRemoveFired = true;
this.onRemoveIndex = index;
}
// Mark the flag, and save the paramter if this hook
// is fired
protected override void OnRemoveComplete(int index,
object value)
{
this.onRemoveCompleteFired = true;
this.onRemoveCompleteIndex = index;
}
// Mark the flag, and save the paramters if this hook
// is fired
protected override void OnSet(int index, object oldValue,
object newValue)
{
this.onSetFired = true;
this.onSetOldValue = (int) oldValue;
this.onSetNewValue = (int) newValue;
}
// Mark the flag, and save the paramters if this hook
// is fired
protected override void OnSetComplete(int index,
object oldValue,
object newValue)
{
this.onSetCompleteFired = true;
this.onSetCompleteOldValue = (int) oldValue;
this.onSetCompleteNewValue = (int) newValue;
}
} // public class ConcreteCollection
public static ITest Suite {
get {
return new TestSuite
(typeof(CollectionBaseTest));
}
}
// Check the count property
public void TestCount() {
ConcreteCollection myCollection;
myCollection = new ConcreteCollection(4);
Assert(4 == myCollection.Count);
}
// Make sure GetEnumerator returns an object
public void TestGetEnumerator() {
ConcreteCollection myCollection;
myCollection = new ConcreteCollection(4);
Assert(null != myCollection.GetEnumerator());
}
// OnValid disallows nulls
public void TestOnValid() {
ConcreteCollection myCollection;
try {
myCollection = new ConcreteCollection();
}
catch (ArgumentNullException) {
}
}
// Test various Insert paths
public void TestInsert() {
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
// The constructor inserts
myCollection = new ConcreteCollection(numberOfItems);
Assert(myCollection.onInsertFired);
Assert(myCollection.onInsertCompleteFired);
// Using the IList interface, check inserts in the middle
IList listObj = myCollection;
listObj.Insert(1, 9);
Assert(myCollection.onInsertIndex == 1);
Assert(myCollection.onInsertCompleteIndex == 1);
Assert(myCollection.PeekAt(1) == 9);
}
// Test Clear and it's hooks
public void TestClear()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 1;
myCollection = new ConcreteCollection(numberOfItems);
myCollection.Clear();
Assert(myCollection.Count == 0);
Assert(myCollection.onClearFired);
Assert(myCollection.onClearCompleteFired);
}
// Test RemoveAt, other removes and the hooks
public void TestRemove()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
// Set up a test collection
myCollection = new ConcreteCollection(numberOfItems);
// The list is 0-based. So if we remove the second one
myCollection.RemoveAt(1);
// We should see the original third one in it's place
Assert(myCollection.PeekAt(1) == 2);
Assert(myCollection.onRemoveFired);
Assert(myCollection.onRemoveIndex == 1);
Assert(myCollection.onRemoveCompleteFired);
Assert(myCollection.onRemoveCompleteIndex == 1);
IList listObj = myCollection;
listObj.Remove(0);
// Confirm parameters are being passed to the hooks
Assert(myCollection.onRemoveIndex == 0);
Assert(myCollection.onRemoveCompleteIndex == 0);
}
// Test the random access feature
public void TestSet()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
myCollection = new ConcreteCollection(numberOfItems);
IList listObj = myCollection;
listObj[0] = 99;
Assert((int) listObj[0] == 99);
Assert(myCollection.onSetFired);
Assert(myCollection.onSetCompleteFired);
Assert(myCollection.onSetOldValue == 0);
Assert(myCollection.onSetCompleteOldValue == 0);
Assert(myCollection.onSetNewValue == 99);
Assert(myCollection.onSetCompleteNewValue == 99);
}
}
}
----------------------- CollectionBaseTest.cs ends --------
</pre>
<ul>
* If you use Emacs, you might want to use the .emacs
file and the package developed by Brad Merrill
mailto:[email protected]. It will allow you to
highlight and indent in C# style in your Emacs
editor. (XEmacs will still work but it'll also
complain).
* CSharpDevelop is a GPLed IDE developed by IC#Code.
Search for it at sourceforge if you are interested
in it.
* For those who Java: "A comparison of Microsoft's
C# programming language to Sun Microsystem's Java
Programming language" by Dare Obasanjo is a really good
(very complete) text to read.
* Suggest this point and more, now I can't think of
anything more.
</ul>
Enjoy!!.
(c) 2002, <a href="mailto:[email protected]">Jaime Anguiano Olarra</a>.
The parts included in this document are property of their
respective authors.
Note: The identation of the source code has been changed a bit
so it could fit better in the website. Anyway, as nothing more
changed, the files should work as expected.
+194
View File
@@ -0,0 +1,194 @@
* Mono hacking TODO list
From time to time people that want to contribute to Mono ask
on the mailing list what they can help with. The generic
answer is always:
<ul>
* Write documentation.
* Write regression tests.
* Complete the implementations of the class libraries.
* Help fix the bugs filed in our bugzilla database.
</ul>
The proposed tasks are very important for the Mono project and
are suitable for people that can dedicate even just an hour
per week to contribute. But some people may need something
more focused to work on, such as students that want to do a
thesis on their contribution to Mono. For such people (and
also for professors who want ideas for thesis regarding JIT or
VM technologies), here is a list of tasks that need attention.
The estimated time to complete any of the tasks is between 1
week to several months to accomodate for different hacking
possibilities.
Note on the time estimates: they are very rough estimates, a
smart and dedicated hacker can complete the tasks in half of
the minimum time, a part-time hacker that also has a social
life can take more than double the max time, but there's
nothing to worry as long as progress is being done.
If some people (or group of people) want to take on a task,
they should write to the mono-devel mailing list and in the
relative bugzilla bug report. Discussions about how to
implement a feature or additional information on the task
should be mailed to the list or in the bugzilla report as well
so that people can keep informed on the progress or have the
information needed to start contributing.
Mono is an excellent platform for research on JITs, virtual
machines and specifically the CLR because it provides an
advanced free software implementation that can be used as a
basis for more optimizations, new approaches to problems and
new features.
There are different areas of interest where high-level
contributions can be made:
<ul>
* <b>JIT compiler</b>: tasks can be: adding more optimizations, reducing
compile time, porting to different architectures.
* <b>AOT compiler</b>: optimizing the compiler output and the AOT loader,
better support for multiple application domains.
* <b>VM runtime</b>: optimizing the runtime data structures, experimenting with
different garbage collectors, integration with different component models.
* <b>Class library</b>: many opportunities in the implementation of regular
expressions, Xml related technologies (XPath, XLST, etc).
* <b>Compilers</b>: writing compilers, interpreters and runtimes for langauges
so that they run on the CLR (using Reflection.Emit support, for example).
</ul>
Happy hacking!
<table border=1 cellspacing="0" cellpadding="0">
<tr>
<th>Area<th>Description<th>Difficulty<th>Time estimate<th>Bugzilla ID
</tr>
<tr>
<td>Runtime (mono/metadata)
<td>Optimize method vtable. Currently all the methods in a class
are added to the method vtable, including static and non-virtual methods.
This makes vtables bigger and the instructions to access them are longer,
increasing also code size. Some code in metadata/icall.c and maybe also some
remoting code may depend on the current layout: such code should be fixed as well.
<td>Medium
<td>1-2 weeks
<td>not assigned
</tr>
<tr>
<td>System assembly (mcs/class/System/)
<td>Implement the IL-based regular expression engine. Instead of
intepreting the regular expression pattern, a method is created at runtime using
Reflection.Emit. This makes for faster pattern matching because there is no
intepreter overhead and the matching code is jitted to fast native code.
Bonus points if the compiled regular expression is compatible with the ones generated
by the MS runtime.
<td>Medium-hard (thesis subject)
<td>2-4 months
<td>not assigned
</tr>
<tr>
<td>JIT (mono/mini/)
<td>Implement common subexpression elimination.
Global and local common subexpression elimination needs to be implemented
to achieve better performance. The local case is easier and may take just one month.
It should be implemented in the context of the SSA framework (mini/ssa.c).
<td>Hard (thesis subject)
<td>2-4 months
<td>not assigned
</tr>
<tr>
<td>JIT (mono/mini/)
<td>Optimize AOT compiler output.
Currently the code generated by the AOT compiler may be significantly slower than
jitted code. This is mostly because the AOT code supports multiple application domains
and some values that are constant at JIT-time are not constant at AOT-time. It may be
needed to write a simple dynamic linker and/or binary object writer. Bonus poinst if
it supports ELF, PE/COFF and mach-O binary formats. A possible idea for improvements
is also the use of appdomain ID-indexed tables to get at the appdomain specific data.
<td>Medium-hard (thesis subject)
<td>3-6 months
<td>not assigned
</tr>
<tr>
<td>JIT (mono/mini/)
<td>Implement generics support.
We need to add support for the additional instructions and change existing ones to
support the generics requirements.
<td>Medium-hard
<td>2-3 months
<td>not assigned
</tr>
<tr>
<td>JIT (mono/mini/)
<td>Port the JIT to additional architectures.
Currently ports are in the works for ppc, arm, sparc, s390. None of the ports
are as feature-complete as the x86 one, yet, so help is needed in getting them
up to speed. Ports to more architectures are welcome as well.
<td>Medium-hard
<td>3-6 months per arch
<td>not assigned
</tr>
<tr>
<td>Runtime and JIT (mono/metadata and mono/mini/)
<td>Add support for COM and/or XPCOM and/or ORBit.
We need a way to seamlessy use existing component technologies inside the mono runtime.
The COM support needs to match the MS runtime behaviour and is targeted at windows systems.
XPCOM and ORBit support are important on Unix platforms. Bonus points for developing
the runtime support so that different component systems can be used at the same time.
<td>Medium-hard (thesis subject)
<td>3-4 months for each
<td>not assigned
</tr>
<tr>
<td>Runtime and JIT (mono/metadata and mono/mini/)
<td>Implement support for Code Access Security.
Support needs to be added to the JIT and the runtime to ensure
code that executes privileged operations is permitted to do so.
The task includes loading the security information from metadata,
collecting evidence, inserting calls to the permission objects,
stack walking to collect security info.
<td>Medium-hard (thesis subject)
<td>4-5 months
<td>not assigned
</tr>
<tr>
<td>Runtime and JIT (mono/metadata and mono/mini/)
<td>Implement support for a generational GC.
We're currently using a conservative non-moving GC.
Support for a generational and moving GC requires changes to the JIT
(to record locations in frames as well as registers that may contain
pointers to GC-allocated memory) and to the runtime code (when
objects are manipulated directly we should make sure they are pinned
and reachable by the GC also in the C unmanaged code). Code from an existing
precise GC such as the ORP one could be reused or a new GC may be developed
(increasing the estimated development time).
<td>Hard (thesis subject)
<td>6-8 months
<td>not assigned
</tr>
<tr>
<td>Compilers for dynamic languages
<td>Write a IL compiler and runtime support for dynamic languages like
Python, Perl, Ruby, PHP.
<td>Medium-hard (thesis subject)
<td>6-12 months
<td>not assigned
</tr>
</table>
+755
View File
@@ -0,0 +1,755 @@
* MonoDoc XML Tag Reference
** Introduction
<em>
[This documentation is in progress. Comments to
<a href="mailto:[email protected]">[email protected]</a> and/or
<a href="mailto:[email protected]">[email protected]</a>.]
</em>
MonoDoc XML, our format for multilingual API documentation stored outside of
source files, is very similar to the output of Microsoft's csc /doc. Minor
alterations have been made to ease human parsing and hand-editing, but
the majority of the tags are identical. In fact, many of the descriptions
and examples below are taken from the ECMA C# Language Specification with
little or no alteration.
This document provides a list of all available MonoDoc XML tags, with
syntax and examples. A complete example can be found in
<a href="#appendix-a">Appendix A</a>, and both a <a href="#">DTD</a> and
<a href="#">XSD schema</a> will be available very shortly.
** MonoDoc XML Tags
<dl>
<dt><code><a href="#c">&lt;c&gt;</a></code></dt>
<dd>Mark short sections of text as code.</dd>
<dt><code><code><a href="#code">&lt;code&gt;</a></code></dt></code>
<dd>Mark one or more lines as code or output.</dd>
<dt><code><a href="#doc">&lt;doc&gt;</a></dt></code>
<dd>Root element of documentation XML.</dd>
<dt><code><a href="#event">&lt;event&gt;</a></dt></code>
<dd>Describe an event.</dd>
<dt><code><a href="#example">&lt;example&gt;</a></dt></code>
<dd>An example.</dd>
<dt><code><a href="#exception">&lt;exception&gt;</a></dt></code>
<dd>Specify an exception a method can throw.</dd>
<dt><code><a href="#field">&lt;field&gt;</a></dt></code>
<dd>Describe a field.</dd>
<dt><code><a href="#list">&lt;list&gt;</a></dt></code>
<dd>Create a list or table.</dd>
<dt><code><a href="#method">&lt;method&gt;</a></dt></code>
<dd>Describe a method.</dd>
<dt><code><a href="#para">&lt;para&gt;</a></dt></code>
<dd>Allow text to be structured in paragraphs.</dd>
<dt><code><a href="#param">&lt;param&gt;</a></dt></code>
<dd>Specify a parameter for a method.</dd>
<dt><code><a href="#paramref">&lt;paramref&gt;</a></dt></code>
<dd>Mark a word as a parameter.</dd>
<dt><code><a href="#permission">&lt;permission&gt;</a></dt></code>
<dd>Define the access level of a member.</dd>
<dt><code><a href="#property">&lt;property&gt;</a></dt></code>
<dd>Describe a property.</dd>
<dt><code><a href="#remarks">&lt;remarks&gt;</a></dt></code>
<dd>Provide verbose information for a type or member.</dd>
<dt><code><a href="#returns">&lt;returns&gt;</a></dt></code>
<dd>Specify the return value of a method.</dd>
<dt><code><a href="#see">&lt;see&gt;</a></dt></code>
<dd>Specify a link.</dd>
<dt><code><a href="#seealso">&lt;seealso&gt;</a></dt></code>
<dd>Specify a 'see also' entry.</dd>
<dt><code><a href="#summary">&lt;summary&gt;</a></dt></code>
<dd>Provide a brief (usually one sentence) description of a member or type.</dd>
<dt><code><a href="#type">&lt;type&gt;</a></dt></code>
<dd>Describe a type.</dd>
</dl>
** Definitions and Examples
*** <a name="c">&lt;c&gt;</a>
This tag can be used to mark short, inline fragments of text that should
be considered source code or program output. User agents should render
this tag in a special -- likely monospace -- font. For larger sections,
use <a href="#code"><code>&lt;code&gt;</code></a>.
**** Syntax
<pre>
&lt;c&gt;code or output text&lt;/c&gt;
</pre>
**** Example
<pre>
&lt;remarks&gt;
Class &lt;c&gt;Point&lt;/c&gt; models a point in two-dimensional space.
&lt;/remarks&gt;
</pre>
*** <a name="code">&lt;code&gt;</a>
This tag can be used to mark one or more lines of text as source code or
program output. User agents should render this tag in a special (likely
monospace) font, and preserve both whitespace and newlines.
**** Syntax
<code>&lt;code&gt;source or program output&lt;/code&gt;</code>
**** Example
<pre>
&lt;summary&gt;
This method changes the point's location by the given
x- and y-offsets.
&lt;example lang="C#"&gt;
A C# example:
&lt;code&gt;
Point p = new Point(3, 5);
p.Translate(-1, 3);
// p == (2, 8);
&lt;/code&gt;
&lt;/example&gt;
&lt;/summary&gt;
</pre>
*** <a name="doc">&lt;doc&gt;</a>
This tag is the root element of the documentation file. It can contain
any number of &lt;type&gt; elements.
**** Syntax
<code>&lt;doc lang="language" assembly="assembly"&gt;typedocs&lt;/doc&gt;</code>
<blockquote>
<em>lang="language"</em><br />
The two-letter ISO code that specifies what language the contained
documentation is written in.
</blockquote>
**** Example
<pre>
&lt;doc lang="en"&gt;
&lt;type name="Graphics.Point"&gt;
&lt;!-- ... --&gt;
&lt;/type&gt;
&lt;/doc&gt;
</pre>
*** <a name="event">&lt;event&gt;</a>
This tag documents an event.
**** Syntax
<code>&lt;event name="eventname"&gt;documentation&lt;/event&gt;</code>
<blockquote>
<em>name="eventname"</em><br />
The name of the event being documented.
</blockquote>
**** Example
<pre>
&lt;event name="Click"&gt;
&lt;summary&gt;
Occurs when the control is clicked.
&lt;/summary&gt;
&lt;data&gt;
The event handler receives an argument of type EventArgs
containing data related to this event.
&lt;/data&gt;
&lt;remarks&gt;
&lt;para&gt;The ControlStyles.StandardClick style must be set
for this event to be raised.&lt;/para&gt;
&lt;para&gt;For more information about handling events, see
Consuming Events.&lt;/para&gt;
&lt;/remarks&gt;
&lt;/event&gt;
</pre>
*** <a name="example">&lt;example&gt;</a>
This tag marks a section of text as an example, and optionally specifies
what programming language <code><a href="#code">&lt;code&gt;</a></code> portions of the example are written in.
**** Syntax
<code><example lang="language">example text and code</example></code>
<blockquote>
<em>lang="language"</em><br />
(optional) The name of the programming language <code><a href="#code">&lt;code&gt;</a></code> blocks in this example
use. This information can be used by user agents to provide
intelligent access to examples in multiple languages.
</blockquote>
**** Example
See <code><a href="#code">&lt;code&gt;<a/></code> for an example.
*** <a name="exception">&lt;exception&gt;</a>
This tag provides a way to specify the exceptions a method can throw.
**** Syntax
<code>&lt;exception cref="exception-type"&gt;description&lt;/exception&gt;</code>
<blockquote>
<em>cref="exception-type"</em><br />
The name of an exception type.
</blockquote>
**** Example
<pre>
&lt;exception cref="System.IO.FileNotFoundException"&gt;
Thrown when the requested file is not found.
&lt;/exception&gt;
</pre>
*** <a name="field">&lt;field&gt;</a>
This tag is used to describe a field.
**** Syntax
<code>&lt;field name="fieldname"&gt;documentation&lt;/field&gt;</code>
<blockquote>
<em>name="fieldname"</em><br />
The name of the field being documented.
</blockquote>
**** Example
<pre>
&lt;field name="x"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;x&lt;/c&gt; represents the point's
x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
</pre>
*** <a name="list">&lt;list&gt;</a>
This tag is used to create a list or table of items. It may contain a
<code>&lt;listheader&gt;</code> block to define the heading row of either a table or
definition list. (When defining a table, only an entry for 'term' in the
heading need be supplied.)
Each item in the list is specified with an <code>&lt;item&gt;</code> block. When creating a
definition list, both <code>&lt;term&gt;</code> and <code>&ltdescription&gt;</code> must be specified.
However, for a table, bulleted list, or numbered list, only <code>&lt;description&gt;</code>
need be specified.
**** Syntax
<pre>
&lt;list type="bullet" | "number" | "table"&gt;
&lt;listheader&gt;
&lt;term&gt;term&lt;/term&gt;
&lt;description&gt;description&lt;/description&gt;
&lt;/listheader&gt;
&lt;item&gt;
&lt;term&gt;term&lt;/term&gt;
&lt;description&gt;description&lt;/description&gt;
&lt;/item&gt;
...
&lt;/list&gt;
</pre>
<blockquote>
<em>term</em><br />
The term to define, whose definition is in <code>&lt;description&gt;</code>.
<br /><br />
<em>description</em><br />
Either an item in a bullet or numbered list, or the definition of a <code>&lt;term&gt;</code>.
</blockquote>
**** Example
<pre>
&lt;list type="bullet"&gt;
&lt;item&gt;
&lt;description&gt;Item 1&lt;/description&gt;
&lt;/item&gt;
&lt;item&gt;
&lt;description&gt;Item 2&lt;/description&gt;
&lt;/item&gt;
&lt;/list&gt;
</pre>
*** <a name="method">&lt;method&gt;</a>
This tag is the overall containing tag for documenting a method.
**** Syntax
<code>&lt;method name="methodname"&gt;documentation&lt;/method&gt;</code>
**** Example
<pre>
&lt;method name="op_Equality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;
This operator determines whether two points have
the same location.
&lt;/summary&gt;
&lt;param name="p1"&gt;
&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.
&lt;/param&gt;
&lt;param name="p2"&gt;
&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.
&lt;/param&gt;
&lt;returns&gt;
True if the points have the same location and they
have the exact same type; otherwise, false.
&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
</pre>
*** <a name="para">&lt;para&gt;</a>
This tag is for use inside other tags such as <code>&lt;remarks&gt;</code> or <code>&lt;returns&gt;</code>, and
allows text to be structured into paragraphs.
**** Syntax
<code>&lt;para&gt;text&lt;/para&gt;</code>
**** Example
<pre>
&lt;summary&gt;
&lt;para&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt; class testing
program.
&lt;/para&gt;
&lt;para&gt;
This program tests each method and operator, and
is intended to be run after any non-trivial maintenance has
been performed on the &lt;c&gt;Point&lt;/c&gt; class.
&lt;/para&gt;
&lt;/summary&gt;
</pre>
*** <a name="param">&lt;param&gt;</a>
This tag is used to describe a parameter for a method, constructor, or
indexer.
**** Syntax
<code>&lt;param name="name"&gt;description&lt;/param&gt;</code>
<blockquote>
<em>name</em><br />
The name of the parameter.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt;
class.
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name "yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
</pre>
*** <a name="paramref">&lt;paramref&gt;</a>
This tag is used to indicate that a word is a parameter. User agents
could use this information for special formatting or hyperlink insertion.
**** Syntax
<code>&lt;paramref name="name" /&gt;</code>
<blockquote>
<em>name</em><br />
The name of the parameter.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This constructor initializes the new Point to
(&lt;paramref name="xor" /&gt;,&lt;paramref name="yor" /&gt;).
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name "yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
</pre>
*** <a name="permission">&lt;permission&gt;</a>
This tag allows the security accessibility of a member to be documented.
**** Syntax
<code>&lt;permission cref="member"&gt;description&lt;/permission&gt;</code>
<blockquote>
<em>cref="member"</em><br />
The name of a member.</br>
</blockquote>
**** Example
<pre>
&lt;permission cref="System.Security.PermissionSet"&gt;
Everyone can access this method.
&lt;/permission&gt;
</pre>
*** <a name="property">&ltproperty&gt;</a>
This tag is the overall containing tag for documenting a property.
**** Syntax
<code>&lt;property name="propertyname"&gt;documentation&lt;/property&gt;</code>
<blockquote>
<em>name="propertyname"</em><br />
The name of the property.
</blockquote>
**** Example
<pre>
&lt;property name="X"&gt;
&lt;summary&gt;
Gets or sets the point's x-coordinate.
&lt;value&gt;
The point's x-coordinate.
&lt;/value&gt;
&lt;/property&gt;
</pre>
*** <a name="remarks">&lt;remarks&gt;</a>
This tag contains extended discussion and information about a member or
a type. <em>[jbarn: This differs from both the ECMA docs and
portions of Microsoft's documentation, but seems consistent with both
common usage, and, more importantly, NDoc convention.]</em>
**** Syntax
<code>&lt;remarks&gt;description&lt;/remarks&gt;</code>
**** Example
<pre>
&lt;type name="Graphics.Point"&gt;
&lt;summary&gt;
Models a point in a two-dimensional plane.
&lt;/summary&gt;
&lt;remarks&gt;
Herein I might have an extended discussion of
the validity of Cartesian coordinate systems,
with examples pro and con, and perhaps
some code.
&lt;/remarks&gt;
&lt;!-- ... --&gt;
&lt;/type&gt;
</pre>
*** <a name="returns">&lt;returns&gt;</a>
This tag is used to describe the return value of a method.
**** Syntax
<code>&lt;returns&gt;description&lt;/returns&gt;</code>
**** Example
<pre>
&lt;method name="op_Inequality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;
This operator determines whether two points have the
same location.
&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;
True if the points do not have the same location and they
have the exact same type; otherwise, false.
&lt;/returns&gt;
&lt;/method&gt;
</pre>
*** <a name="see">&lt;see&gt;</a>
This tag allows a link to be specified within documentation text. (Use
<code>&lt;seealso&gt;</code> to indicate links that should appear in a 'See Also' section.)
**** Syntax
<code>&lt;see cref="destination" /&gt;</code>
<blockquote>
<em>cref="destination"</em><br />
A destination, such as a type or a member of a type.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This method changes the point's location to the given
coordinates. This is an asinine way to insert a link,
but &lt;see cref="Equals(Object)" /&gt; to understand
how points are compared.
&lt;/summary&gt;
</pre>
*** <a name="seealso">&lt;seealso&gt;</a>
This tag allows an entry to be generated for the 'See Also' section. (Use
<code>&lt;see&gt;</code> to specify a link from within text.)
**** Syntax
<code>&lt;seealso cref="destination" /&gt;</code>
<blockquote>
<em>cref="destination"</em><br />
A destination, such as a type or a member of a type.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This method determines whether two Points have the
same location.
&lt;/summary&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point" /&gt;
</pre>
*** <a name="summary">&lt;summary&gt;</a>
This tag contains a short summary of a member or type,
often one sentence. <em>[jbarn: This differs from both the ECMA docs and
portions of Microsoft's documentation, but seems consistent with both
common usage, and, more importantly, NDoc convention.]</em>
**** Syntax
<code>&lt;summary&gt;description&lt;/summary&gt;</code>
**** Example
<pre>
&lt;summary&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt; class testing
program.
&lt;/summary&gt;
&lt;remarks&gt;
This program tests each method an operator, and is intended
to be run after any non-trivial maintenance is performed
on the &lt;c&gt;Point&lt;/c&gt; class.
&lt;/remarks&gt;
</pre>
*** <a name="type">&lt;type&gt;</a>
This tag is the overall containing tag for documenting a type.
**** Syntax
<code>&lttype name="typename" assembly="assemblyname"&gt;documentation&lt;/type&gt;</code>
<blockquote>
<em>name="typename"</em><br />
The name of the type being documented.
<br /><br />
<em>assembly="assemblyname"</em><br />
The assembly this type resides in. This attribute is not required for nested types.
</blockquote>
**** Example
<pre>
&lt;type name="Graphics.Point" assembly="Point"&gt;
&lt;summary&gt;
Models a point in two-dimensional space.
&lt;/summary&gt;
&lt;!-- members --&gt;
&lt;field name="x"&gt;
&lt;summary&gt;
Represents the point's x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;/type&gt;
</pre>
** <a name="appendix-a">Appendix A: Complete Example</a>
<em>[jbarn: Please, please, don't take the human-readable portions of
this example to be good guidelines for writing your own documentation.
this XML is intended only to show structure.]</em>
<pre>
&lt;?xml version="1.0" encoding="UTF-8"?&gt;
&lt;doc lang="en"&gt;
&lt;type name="Graphics.Point" assembly="Point"&gt;
&lt;summary&gt;
Models a point in a two-dimensional plane.
&lt;/summary&gt;
&lt;remarks&gt;
No useful remarks.
&lt;/remarks&gt;
&lt;!-- fields --&gt;
&lt;field name="x"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;x&lt;/c&gt; represents the point's x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;field name="y"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;y&lt;/c&gt; represents the point's y-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;!-- methods --&gt;
&lt;method name="#ctor"&gt;
&lt;summary&gt;
Initializes the new point to &lt;c&gt;(0,0)&lt;/c&gt;.
&lt;/summary&gt;
&lt;/method&gt;
&lt;method name="#ctor(System.Int32,System.Int32)"&gt;
&lt;summary&gt;
Initializes the new Point to (&lt;paramref name="xor" /&gt;,&lt;paramref name="yor" /&gt;).
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
&lt;/method&gt;
&lt;method name="Move(System.Int32,System.Int32)"&gt;
&lt;summary&gt;
This method changes the point's location to the given coordinates.
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
&lt;seealso cref="Translate(System.Int32,System.Int32)" /&gt;
&lt;/method&gt;
&lt;method name="Translate(System.Int32,System.Int32)"&gt;
&lt;summary&gt;This method changes the point's location by the given x- and y-offsets.&lt;/summary&gt;
&lt;remarks&gt;
&lt;example lang="C#"&gt;
A C# example:
&lt;code&gt;
Point p = new Point(3, 5);
p.Translate(-1, 3);
&lt;/code&gt;
This code results in &lt;c&gt;p&lt;/c&gt; having the value (2,8).
&lt;/example&gt;
&lt;/remarks&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the relative x-offset.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the relative y-offset.&lt;/param&gt;
&lt;seealso cref="Move(System.Int32,System.Int32)" /&gt;
&lt;/method&gt;
&lt;method name="Equals(System.Object)"&gt;
&lt;summary&gt;This method determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="o"&gt;&lt;c&gt;o&lt;/c&gt; is the object to be compared to the current object.&lt;/param&gt;
&lt;returns&gt;True if the Points have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point" /&gt;
&lt;/method&gt;
&lt;method name="ToString"&gt;
&lt;summary&gt;Report a point's location as a string.&lt;/summary&gt;
&lt;returns&gt;A string representing a point's location, in the form (x,y), without any
leading, trailing, or embedded whitespace.&lt;/returns&gt;
&lt;/method&gt;
&lt;method name="op_Equality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;This operator determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;True if the points have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
&lt;method name="op_Inequality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;This operator determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;True if the points do not have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
&lt;method name="Main"&gt;
&lt;summary&gt;
This is the entry point of the Point class testing program.
&lt;/summary&gt;
&lt;remarks&gt;
&lt;para&gt;This program tests each method and operator, and is intended to be run after
any non-trivial maintenance has been performed on the Point class.&lt;/para&gt;
&lt;/remarks&gt;
&lt;/method&gt;
&lt;!-- properties --&gt;
&lt;property name="X"&gt;
&lt;value&gt;Property &lt;c&gt;X&lt;/c&gt; represents the point's x-coordinate.&lt;/value&gt;
&lt;/property&gt;
&lt;property name="Y"&gt;
&lt;value&gt;Property &lt;c&gt;y&lt;/c&gt; represents the point's y-coordinate.&lt;/value&gt;
&lt;/property&gt;
&lt;/type&gt;
&lt;/doc&gt;
</pre>
Executable
+329
View File
@@ -0,0 +1,329 @@
* MySQL Data Provider
<p>There are two ADO.NET providers in Mono
for a <a href="http://www.mysql.com/">MySQL</a> database:
<ul>
<li><a href="http://sourceforge.net/projects/mysqlnet/">ByteFX.Data.MySQLClient</a>
<ul>
<li>Written in 100% C#</li>
<li>Does not require a client library</li>
<li>Works on Mono and Microsoft .NET</li>
<li>Requires at least Mono 0.18 and MySQLNet 0.65 for it to work on Mono</li>
<li>Works in the SQL# command-line and GTK# GUI version</li>
</ul>
</li>
<li>Mono.Data.MySql (deprecated)
<ul>
<li>Deprecated in favor of ByteFX.Data.MySQLClient
<li>Written in C# and uses
the MySQL C Client Library</li>
<li>Exists in namespace Mono.Data.MySql and assembly Mono.Data.MySql</li>
<li>Works on Windows and Linux via the MySQL client shared library
(libmySQL.dll on Windows and libmysqlclient.so on Linux).</li>
<li>Started by Daniel Morgan using
<a href="http://www.cybercom.net/~zbrad/DotNet/MySql/">C# Bindings to MySQL</a> from <a href="mailto:[email protected]">Brad Merill</a></li>
</ul>
</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
<p><a href="http://www.mysql.com/articles/dotnet/">Exploring MySQL
in the Microsoft .NET Environment</a> is an article
by Mr. Venu who is a MySQL AB developer.</li>
<p>Testing for Mono's Mono.Data.MySql and ByteFX's ByteFX.Data.MySQLClient is below.
** Current Status
Current Status of the MySQL providers:
<ul>
<li>ByteFX.Data.MySQLClient
<ul>
<li>Build and Runs on Microsoft .NET and Mono</li>
<li>Works with SQL# (command-line and GTK# GUI versions)</li>
<li>MySQLCommandBuilder now implemented</li>
<li>Transaction support now implemented (not all table types support this)</li>
<li>GetSchemaTable fixed to not use xsd (for Mono)</li>
<li>Driver is now Mono-compatible</li>
<li>TIME data type now supported</li>
<li>More work to improve Timestamp data type handling</li>
<li>Changed signatures of all classes to match corresponding SqlClient classes</li>
<li>Protocol compression using <a href="http://www.icsharpcode.net/OpenSource/SharpZipLib/default.asp">SharpZipLib</a></li>
<li>Named pipes on Windows now working properly</li>
<li>Work done to improve Timestamp data type handling</li>
<li>Implemented IEnumerable on DataReader so DataGrid would work</li>
<li>Speed increased dramatically by removing bugging network sync code</li>
<li>Driver no longer buffers rows of data (more ADO.Net compliant)</li>
<li>Conversion bugs related to TIMESTAMP and DATETIME fields fixed</li>
</ul>
</li>
<li>Mono.Data.MySql (deprecated)
<ul>
<li>Currently, only works with version 3.23.x of MySQL</li>
<li>can connect</li>
<li>can execute non-queries via ExecuteNonQuery()</li>
<li>can execute aggregates via ExecuteScalar() and retrieve the
single row/single column result</li>
<li>can execute queries and retrieve results using a data reader.</li>
<li>a schema DataTable has been partially
implemented which is returned from GetSchemaTable() in MySqlDataReader.</li>
<li>a DataTable in a DataSet can be filled via a MySqlDataAdapter</li>
<li>The shared client libraries
between windows version and linux are different: windows has libmySQL.dll
while linux has libmysqlclient.so. This is handled by the
file etc/mono/config which is mapped by the mono runtime in knowing
which native shared library to load. In cvs, this file is mono/config.in and
can be modified with a text editor.</li>
<li>Works in the SQL# command-line and GTK# GUI version</li>
</ul>
</li>
</ul>
** Action plan
The current plan for the MySQL data providers:
<ul>
<li>ByteFX.Data.MySQLClient
<ul>
<li>Testing and fixes</li>
<li>Implement missing features</li>
<li>Only fixes for bugs to build and run MySQLClient on Mono
will be accepted in mono-cvs. Most bugs and any new features will
go into sourceforge cvs. Anytime there is a release of MySQLClient,
the source code will be copied from sourceforge cvs to mono-cvs</li>
<li>Releases of MySQLClient are determined by Reggie Burnett and releases
of Mono are determined by Miguel de Icaza</li>
<li>Implement any missing features or fix any bugs in Mono to get new
features all of MySQLClient to work on Mono</li>
</ul>
</li>
<li>Mono.Data.MySql (deprecated)
<ul>
<li>Testing and bug fixes</li>
<li>Mono.Data.MySql is deprecated and therefore maybe removed
at a later date. It will stay in Mono for now because other
programs maybe using it now.</li>
</ul>
</li>
</ul>
** Testing for MySQLNet provider (ByteFX.Data.MySQLClient)
<ul>
<li>Have access to a MySQL database or download it from
<ul>
<li><a href="http://www.mysql.com/downloads/index.html">MySQL AB</a></li>
</ul>
</li>
<li>MySQLNet can be gotten from <a href="http://sourceforge.net/projects/mysqlnet/">here</a> and the
binary assembly ByteFX.Data.dll needs to be installed
in the same place as the mono class libraries.</li>
<li>MySQLNet requires <a href="http://www.icsharpcode.net/OpenSource/SharpZipLib/default.asp">SharpZipLib</a> which is
a Zip Library written in 100% C#. This is used for compression/decompression of data
sent/received over the network. The SharpZipLib binary assembly SharpZipLib.dll should
be installed in the same place as the mono class libraries.</li>
<li>Has a ConnectionString format:
<pre>
"Server=hostname;" +
"Database=database;" +
"User ID=username;" +
"Password=password"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using ByteFX.Data.MySQLClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=myuserid;" +
"Password=mypassword;";
IDbConnection dbcon;
dbcon = new MySQLConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = (string) reader["firstname"];
string LastName = (string) reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r ByteFX.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r ByteFX.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
** Testing for Mono's MySQL provider (Mono.Data.MySql)
<ul>
<li>Have access to a MySQL database or download it from
<ul>
<li><a href="http://www.mysql.com/downloads/index.html">MySQL AB</a></li>
</ul>
</li>
<li>Take a look at MySqlTest.cs in mcs/class/Mono.Data.MySql/Test</li>
<li>On Linux, you may need to make a symbolic link from libmySQL.dll to libmysqlclient.dll</li>
<li>Has a ConnectionString format:
<pre>
"Server=hostname;Database=database;User ID=username;Password=password"
(or)
"Host=hostname;Dbname=database;User=username;Passwd=password"
</pre>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.MySql;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=myuserid;" +
"Password=mypassword;";
IDbConnection dbcon;
dbcon = new MySqlConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs \
-r System.Data.dll \
-r Mono.Data.MySql.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll \
-r Mono.Data.MySql.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+218
View File
@@ -0,0 +1,218 @@
* ODBC Data Provider
<ul>
<li>ADO.NET Data Provider for Data Sources
that have <a href="http://www.microsoft.com/data/odbc/">ODBC</a> support.</li>
<li>Exists in namespace System.Data.Odbc and assembly System.Data</li>
<li>Works on Windows and Linux. Should have no problems working on UNIX too.</li>
<li>Works on Windows via the native Windows odbc32.dll</li>
<li>Works on Linux via:
<ul>
<li><a href="http://www.unixodbc.org/">unixODBC</a> which has
commercial support
from <a href="http://www.easysoft.com/">Easysoft</a></li>
<li><a href="http://www.iodbc.org/">iODBC</a> which has
commercial support
from <a href="http://oplweb.openlinksw.com:8080/download/">OpenLink Software</a></li>
</ul>
<li>List of unixODBC <a href="http://www.unixodbc.org/drivers.html">drivers</a>
<li>List of <a href="http://ourworld.compuserve.com/homepages/Ken_North/odbcvend.htm">ODBC Vendors</a>
<li>ODBC can connect to various databases which has an ODBC driver installed:
<ul>
<li><a href="http://www.mysql.com/">MySQL</a></li>
<li><a href="http://www.postgresql.org/">PostgreSQL</a></li>
<li><a href="http://www.oracle.com/">Oracle</a></li>
<li><a href="http://www.borland.com/products/downloads/download_interbase.html">Interbase</a></li>
<li><a href="http://www.sybase.com/downloads">Sybase</a> (
via <a href="http://www.freetds.org/">FreeTDS</a> on UNIX)</li>
<li><a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a> (
via <a href="http://www.freetds.org/">FreeTDS</a> on UNIX)</li>
<li><a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a></li>
<li><a href="http://www.microsoft.com/office/access/default.asp">MS Access</a>
(via <a href="http://mdbtools.sourceforge.net/">MDB Tools</a> on UNIX)</li>
</ul>
<li>ODBC Provider created by Brian Ritchie.</li>
<li>Does not support trusted connections</li>
</ul>
** Current Status
<ul>
<li>Can Connect on:
<ul>
<li>Windows via native Windows odbc32.dll</a></li>
<li>Linux via:
<ul>
<li>unixODBC's libodbc.so</li>
<li>iODBC's libiodbc.so</li>
</ul>
</li>
</ul>
</li>
<li>Various databases have been tested using their
ODBC drivers: MySQL, PostgreSQL, Oracle, IBM DB2, and Microsoft SQL Server</li>
<li>Can execute non-query commands via ExecuteNonQuery of a OdbcCommand</li>
<li>Can execute aggreates and retrieve a single row single column result via
ExecuteScalar of a OdbcCommand</li>
<li>Can execute queries via ExecuteReader of a OdbcCommand and
retrieve results using an OdbcDataReader</li>
<li>Can get a DataTable containing schema info via GetSchemaTable() in a OdbcDataReader</li>
<li>Can Fill a DataTable in a DataSet via an OdbcDataAdapter</li>
<li>Works in SQL#, but Column names don't show up correctly.</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Action Plan
<ul>
<li>Fixing bugs
<li>Testing with other setups
</ul>
** Testing ODBC provider with IBM DB2 Universal Database
<ul>
<li>You need a working mono and mcs</li>
<li>For Unix, you will need unixODBC or iODBC installed</li>
<li>Have acess to a <a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a> or
you can download from IBM</li>
<li>Read these web pages about Unix, ODBC, and IBM DB2
<ul>
<li><a href="http://www.unixodbc.com/doc/db2.html">unixODBC web page about IBM DB2</a></li>
<li><a href="http://www-3.ibm.com/software/data/db2/udb/ad/v8/cli/t0010406">IBM web page about unixODBC and DB2</a></li>
</ul>
</li>
<li>The ODBC provider is similar to the <a href="http://www.go-mono.com/ibmdb2.html">IBM DB2</a> provider.</li>
</ul>
** Testing ODBC provider with MySQL
<p>You can test Mono's ODBC provider System.Data.Odbc with the MySQL ODBC driver MyODBC
<p><ul>
<li>Take a look at OdbcTest.cs in mcs/class/System.Data/Test</li>
<li>Here is a ConnectionString format if you have a DSN setup:
<pre>
"DSN=dataSetName;UID=myuserid;PWD=mypassword"
</pre>
</li>
<li>Here is a ConnectionString format if you do not have a DSN (have not
gotten this to work though):
<pre>
"DRIVER={MySQL ODBC 3.51 Driver};" +
"SERVER=localhost;DATABASE=test;" +
"UID=myuserid;PASSWORD=mypassword;" +
"OPTION=3";
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using System.Data.Odbc;
public class Test
{
public static void Main(string[] args)
{
// have an ODBC DSN setup named MYSQLDSN
// that accesses a MySQL database via
// MyODBC driver for ODBC with a
// hostname of localhost and database test
string connectionString =
"DSN=MYSQLDSN;" +
"UID=myuserid;" +
"PWD=mypassword";
IDbConnection dbcon;
dbcon.Open();
dbcon = new OdbcConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+1507
View File
File diff suppressed because it is too large. Load diff
Executable
+153
View File
@@ -0,0 +1,153 @@
* OLE DB Provider
<ul>
<li> Provides a OleDb-like provider for Mono
using <a href="http://www.gnome-db.org/">GDA</a> as the data access layer.</li>
<li> Exists in namespace System.Data.OleDb and assembly System.Data</li>
<li>Created by Rodrigo Moya</li>
<li>LibGDA has providers for:</li>
<ul>
<li><a href="http://www.mysql.com/">MySQL</a></li>
<li><a href="http://www.postgresql.org/">PostgreSQL</a></li>
<li>XML</li>
<li>ODBC (via <a href="http://www.unixodbc.org/">unixODBC</a>)</li>
<li><a href="http://www.oracle.com/">Oracle</a></li>
<li><a href="http://www.borland.com/products/downloads/download_interbase.html">Interbase</a></li>
<li><a href="http://www.sybase.com/downloads">Sybase</a> and
<a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a> (
via <a href="http://www.freetds.org/">FreeTDS</a>)</li>
<li><a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a></li>
<li><a href="http://www.hwaci.com/sw/sqlite/download.html">SQL Lite</a></li>
<li><a href="http://www.microsoft.com/office/access/default.asp">MS Access</a></li>
(via <a href="http://mdbtools.sourceforge.net/">MDB Tools</a>)</li>
</ul>
</li>
<li>Does not support trusted connections</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>The OleDb provider is working with libgda (an OLE-DB/ADO data access for Unix).
The C-Sharp bindings to libgda currently work - meaning they can compile, run,
and you can connect to a
PostgreSQL database via libgda via the C-Sharp bindings to libgda.</li>
<li>Basic
functionality (execution of commands, data retrieval, transactions, etc) are
now working.</li>
<li>An inital implementation of GetSchemaTable() for
the OleDbDataReader has been checked into cvs. GetSchemaTable() isn't correct for OleDb,
but the foundation is there.</li>
</ul>
** Action Plan
<ul>
<li>Current focus is on filling up the missing pieces (Data adapters
mainly) and schema support.</li>
<li>We need help building libgda on Windows though. libgda
builds find on linux though.</li>
<li>Need to make the OleDb provider compatible with the OleDb provider in Microsoft .NET</li>
</ul>
** Testing OleDb with libgda's PostgreSQL provider
<ul>
<li>Requires a working mono and mcs</li>
<li>Requires Linux because the OleDb provider uses libgda and libgda only
works on Linux.</li>
<li>Connection String format: "Provider=providerName;...". providerName is the
name of the Provider you use, such as, PostgreSQL, MySQL, etc. The elipsis ...
means that the connection parameters are dependent upon the provider being used and
are passed to libgda for connecting. Such paramters, can be: Database, User ID, Password,
Server, etc...</li>
<li>See the test TestOleDb.cs found at mcs/class/System.Data/System.Data.OleDb</li>
<li>C# Example for Mono's System.Data.OleDb:
<pre>
using System;
using System.Data;
using System.Data.OleDb;
public class Test
{
public static void Main(string[] args)
{
// there is a libgda PostgreSQL provider
string connectionString =
"Provider=PostgreSQL;" +
"Addr=127.0.0.1;" +
"Database=test;" +
"User ID=postgres;" +
"Password=fun2db";
IDbConnection dbcon;
dbcon = new OleDbConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+184
View File
@@ -0,0 +1,184 @@
* Oracle Data Provider
<ul>
<li>ADO.NET Data Provider for <a href="http://www.oracle.com/">Oracle</a> databases</li>
<li>Exists in namespace System.Data.OracleClient and assembly System.Data.OracleClient</li>
<li>Works on Windows and Linux</li>
<li>Works with Oracle 8i</li>
<li>Untested, but should work with Oracle 9i</li>
<li>Uses the Oracle CLI (Call Level Interface) which is a C library (API) for the Oracle Client
software</li>
<li>Internally, the OracleClient provider has OCI abstracted to an object-oriented programming model</li>
<li>Created by Daniel Morgan and Tim Coleman</li>
<li>Does not support trusted connections</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>OracleConnection can connect and disconnect to an Oracle 8i database on
Windows and Linux via OCI (Oracle Call-level Interface)</li>
<li>No longer uses a glue library (a library between the System.Data.OracleClient.dll
assembly and the oci library). In Current Mono cvs, System.Data.OracleClient
directly platform invokes into the oci library thanks to Tim Coleman.</li>
<li>Can have multiple connections with different transactions where each transaction is
separated from the others, so a rollback or commit in one transaction
does not affect the other.</li>
<li>Can execute simple DML SQL statements, such as,
INSERT a row into the EMP table via the OracleCommand's ExecuteNonQuery method</li>
<li>The System.Data.OracleClient.dll assembly can be built with mcs/mono via
the makefile.gnu for System.Data.OracleClient or csc/.net via the
System.Data.OracleClient.build nant build file.</li>
<li>Can retrieve data via ExecuteReader and OracleDataReader. Currently,
supports character, numeric, some date data types. ExecuteScalar
also works.</li>
<li>Simple input parameters (character and numeric data) can now
be used in SQL queries. Output parameters do not yet work.</li>
<li>OracleException and Error handling exists now.</li>
<li>Message handling needs to be added for non-critical messages
received from Oracle</li>
<li>Handling of various data types need to be added.</li>
<li>Data Adapter exists, and a DataSet can be filled using it. The
Data Adapter is abstract enough that it should work as expected.</li>
<li>Lots of missing functionality and bugs.</li>
<li>Works with SQL# command-line and GTK# versions in cvs. Only works with
simple character data though. SQL# For GTK# can only show the results to
the TextView because the Data Adapter is not yet available</li>
</ul>
** Action Plan
<ul>
<li>Be able to retrieve results via a data reader (WORKING)</li>
<li>Parameters support (IN PROGRESS)</li>
<li>transactions (WORKING)</li>
<li>Stored Procedures, Functions, and Packages support</li>
<li>Be able to fill a DataTable in a DataSet via a data adapter (IN PROGRESS)</li>
<li>Support for Oracle 8i and 9i (UNKNOWN)</li>
<li>Support LOBs</li>
<li>Support all the data types</li>
<li>Implement Connection pooling</li>
<li>Security</li>
</ul>
** Testing System.Data.OracleClient
<ul>
<li>Have a working mono and mcs</li>
<li>Have access to an Oracle 8i database or download it from
<a href="http://www.oracle.com/">Oracle</a>. If you are connecting
remotely to an Oracle database, you need the Oracle client software.
Registration to the <a href="http://technet.oracle.com/">Oracle Technology Network</a> is free. If installing on Linux,
I suggest you do a lot of searching to see how others installed Oracle on Linux.</li>
<li>Make sure System.Data.OracleClient.dll assembly is built, if not, go
into System.Data.OracleClient and do a make -f makefile.gnu (on Linux) or
../../nant/NAnt.exe (on Windows using Cygwin).</li>
<li>Take a look at TestOracleClient.cs found at mcs/class/System.Data.OracleClient/Test</li>
<li>The Data Source is an Oracle TNSNAME</li>
<li>Has a connection string format:
<pre>
"Data Source=tnsname;User ID=userid;Password=password"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using System.Data.OracleClient;
public class Test
{
public static void Main (string[] args)
{
string connectionString =
"Data Source=testdb;" +
"User ID=scott;" +
"Password=tiger;";
IDbConnection dbcon;
dbcon = new OracleConnection (connectionString);
dbcon.Open ();
IDbCommand dbcmd = dbcon.CreateCommand ();
string sql = "SELECT ename, job FROM scott.emp";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader ();
while (reader.Read ()) {
string employeeName = reader["ename"];
string job = reader["job"];
Console.WriteLine ("Employee Name: {0} Job: {1}",
employeeName, job);
}
// clean up
reader.Close ();
reader = null;
dbcmd.CommandText = sql;
dbcmd.ExecuteNonQuery ();
dbcmd.Dispose ();
dbcmd = null;
dbcon.Close ();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r System.Data.OracleClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r System.Data.OracleClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+34
View File
@@ -0,0 +1,34 @@
* International sites
<ul>
<li><a href="http://www.monohispano.org">Mono
Hispano</a>: The spanish-speaking community of Mono
developers and users. They have quite a number of
unique documents and tutorials.
<li><a href="http://www.go-mono.pl">Mono Poland</a>:
Mono site for polish users.
</ul>
* User sites
<ul>
<li>Alp Toker's <a
href="http://www.atoker.com/mono/">site</a>: He is an
active Mono developer (gsirc, platano) and produces
very nice Debian packages of Mono.
<li>Brian Ritchie's <a
href="http://www12.brinkster.com/brianr/">site</a>:
Brian is a contributor to Mono's class library (ODBC
provider and the database multiplexing assembly), and
has built an application server for .NET and Mono.
His site contains news, software, as well as his
weblog.
</ul>
+96
View File
@@ -0,0 +1,96 @@
* JIT Compiler
<a
href="http://citeseer.nj.nec.com/vitek97efficient.html">
Efficient Type Inclusion Tests: Jahn Vitek, R. Nigel Horspool, Andres
Krall</a>
<a
href="http://citeseer.nj.nec.com/cytron91efficiently.html">
Efficiently Computing Static Single Assignment Form and the Control
Dependence Graph: Ron Cytron, Jeanne Ferrante</a>
<a
href="http://citeseer.nj.nec.com/193349.html">
Practical Improvements to the Construction and Destruction of Static Single Assignment Form: Preston Briggs,
Keith Cooper, Timothy Harvey, Taylor Simpson</a>
<a
href="http://citeseer.nj.nec.com/krall98efficient.html">
Efficient JavaVM Just-in-Time Compilation: Andreas Krall</a>
<a
href="http://citeseer.nj.nec.com/452617.html">Java for
Large-Scale Scientific Computations: Andreas Krall, Phillip Thomsich</a>
<a
href="http://citeseer.nj.nec.com/117522.html">
Engineering Simple, Efficient Code Generator Generator: Christopher
W. Fraser, David R. Hanson, Todd A. Proebsting</a>
<a
href="http://citeseer.nj.nec.com/proebsting92code.html">
Code Generation Techniques: Todd Alan Proebsting</a>
<a
href="http://citeseer.nj.nec.com/74629.html">Fast,
Effective Code Generation in a Just-In-Time Java Compiler: Ali-Reza
Adl-Tabatabai Guei-Yuan Lueh, Vishesh M. Parikh, James M. Stichnoth...</a>
<a
href="http://citeseer.nj.nec.com/bodik00abcd.html">
ABCD: Eliminating Array-Bounds Checks on Demand: Rastislav Bodik, Rajiv Gupta, Vivek Sarkar</a>
* Register Allocation
<a
href="http://citeseer.nj.nec.com/poletto99linear.html">
Linear Scan Register Allocation: Massimiliano Poletto, Vivek Sarkar</a>
<a
href="http://citeseer.nj.nec.com/traub98quality.html">
Quality and Speed in Linear-scan Register Allocation: Omri Traub, Glenn
Holloway, Michael D. Smith</a>
* Loop Transformations
<a
href="http://citeseer.nj.nec.com/bacon93compiler.html">
Compiler Transformations for High-Performance Computing: David Bacon</a>
* Interpreter
<a
href="http://citeseer.nj.nec.com/470069.html">
vmgen-A Generator of Efficient Virtual Machine Interpreters: M. Anton
Ertl, David Gregg, Andreas Krall, Bernd Paysan</a>
* Synchronization
<a
href="http://citeseer.nj.nec.com/krall98monitors.html">
Monitors and Exceptions - How to implement Java efficiently: Andreas Krall,
Mark Probst</a>
<a
href="http://citeseer.nj.nec.com/bacon98thin.html">
Thin Locks: Featherweight Synchronization for Java: David Bacon</a>
<a
href="http://citeseer.nj.nec.com/278639.html">
Featherweight Monitors with Bacon Bits: David Bacon</a>
* Garbage Collection
<a
href="http://citeseer.nj.nec.com/wilson92uniprocessor.html">
Uniprocessor Garbage Collection Techniques: Paul Wilson</a>
<a
href="http://citeseer.nj.nec.com/41666.html">
A Language-Independent Garbage Collector Toolkit: Richard Hudson, Eliot Moss, Amer Diwan, Christopher Weight</a>
<a
href="http://citeseer.nj.nec.com/seligmann95incremental.html">
Incremental Collection of Mature Objects: Richard Hudson, Eliot Moss</a>
+298
View File
@@ -0,0 +1,298 @@
* Updates
<b>Sep 20, 2001:</b> Microsoft has just announced some changes
to passport that are rather interesting. This document
reflects the Passport system without taking into account the
new changes.
Read about it <a href="http://www.microsoft.com/presspass/features/2001/sep01/09-20passport.asp">here</a>.
For an analysis of security problems with passport, check <a
href="http://avirubin.com/passport.html">http://avirubin.com/passport.html</a>.
The bottom line is that you should not put any sensitive
information on passport.
I have received many comments from people, and I have updated
the page accordingly. From removing incorrect statements, to
fixing typos, to include mentions to other software pieces.
I also corrected my statement about IIS and a trojan horse, I
should read a more educated press in the future. My apologies
to Microsoft and its employees on this particular topic. IIS
did not have a trojan horse built in.
* Microsoft Hailstorm and Passport
Microsoft Passport is a centralized database hosted by
Microsoft that enhances the consumer experience with the Web
by providing a single logon system that they can use across a
number of participant web sites.
As you might know by now from our extensive <a
href="faq.html">FAQ</a>, the Mono project has nothing to do
with Microsoft Hailstorm or <a
href="http://www.passport.com">Microsoft Passport.</a>
Still a lot of people have asked us our opinion on them.
** Passport
Passport is important not because of it being a breakthrough
technologically speaking, but because the company is in a
position to drive most people toward being suscribers of it.
At the time of this writing passport is required to use the
free mail service <a href="http://www.hotmail.com">Hotmail</a>
to get customized support for the <a
href="http://www.msn.com">MSN portal</a>, <a
href="http://msdn.microsoft.com">Microsoft Developers
Network</a> and according to the original announcement from
Microsoft <a href="http://www.americanexpress.com">American
Express</a> and <a href="http://www.ebay.com">EBay</a> will be
adopting it.
There is already a <a
href="http://www.passport.com/Directory/Default.asp?PPDir=C&lc=1033">Large
list</a> of participating sites.
There are many current users of it and Microsoft will be
driving more users towards Passport as it <a
href="http://news.cnet.com/news/0-1003-200-6343275.html">integrates
it</a> in their upcoming release of Windows.
Microsoft has also <a
href="http://www.passport.com/Business/JoinPassportNetwork.asp?lc=1033">developed
a toolkit</a> to enable current web merchants to integrate
their services with passport.
To the end user, there is a clear benefit: they only have to
log into a single network and not remember multiple passwords
across sites on the internet. Companies that adopt passport
will have a competition advantage over those that dont.
Microsoft lists a list of <a
href="http://www.passport.com/Business/Default.asp?lc=1033">benefits</a>
to companies.
** The problems of Passport
There are a number of concerns that different groups have over
Passport. Sometimes I have some, sometimes I do not. But
overall, consumers and businesses can have better solutions.
<ul>
* <b>Single Point of Failure:</b> As more services and
components depend on remote servers, functionality can
grind to a halt if there is a failure on the
centralized Passport system.
Such a failure was predicted, and we recently <a
href="http://news.cnet.com/news/0-1005-200-6473003.html">witnessed</a>
got a lot of people worried.
The outgage lasted for seven days. Think what this
could do to your business.
* <b>Trust:</b> Not everyone trusts Microsoft to keep
their information confidential. Concerns are not only
at the corporate level policy, but also the fact that
the source code for Microsoft products is not
available, means that trojans or worms could be built
into the products by malicious engineers.
Various government officials in non-US countries also
have a policy that no state sensitive information can
be held by foreign companies in foreign soil. A natural
matter of national security to some.
* <b>Security:</b> With a centralized system like
Passport, imagine the repercussions of a malicious
hacker gaining access to the Passport database.
Personal information and credit card information about
almost everyone using a computer could be stored there.
Hackers have already <a
href="http://slashdot.org/articles/00/10/27/1147248.shtml">broken
into Microsoft</a> in the past. And the company was
unable to figure out for how long their systems had
been hacked.
Security holes have been found in <a
href="http://slashdot.org/articles/00/04/14/0619206.shtml">IIS
in the past.</a> If all the world's data is stored on
a central location, when a single security hole is
detected, it would allow an intruder to install a
backdoor within seconds into the corporate network
without people ever noticing.
Microsoft itself has been recently hit by worms,
imagine if all your business depended on a single
provider for providing all or your authentication
needs
</ul>
Microsoft might or might not realize this. The idea behind
Passport is indeed a good one (I can start to get rid of my
file that keeps track of the 30 logins and passwords or so
that I use across the various services on the net myself).
** Alternatives to Microsoft Passport
An alternative to Microsoft Passport needs to take the above
problems into consideration. Any solution of the form `We
will just have a competing offering' will not work.
The system thus has to be:
<ul>
* <b>Distributed:</b> The entire authentication
system should not create an internet `blackout' in the
case of failure.
A distributed system using different software
platforms and different vendors would be more
resistent to an attack, as holes in a particular
implementation of the server software would not affect
every person at the same time.
A security hole attack might not even be relevant to
other software vendors software.
* <b>Allow for multiple registrars:</b> Users should
be able to choose a registrar (their banks, local
phone company, service provider, Swiss bank, or any
other entity they trust.
* <b>Mandate good security measures:</b> As a
principle, only Open Source software should be used
for servers in the registrar, and they should conform
to a standard set of tools and software that can be
examined by third parties.
</ul>
An implementation of this protocol could use the DNS or a
DNS-like setup to distribute the information of users with the
possibility of replicating and caching public information
about the user.
For instant messaging (another piece of the Hailstorm bit),
you want to use a non-centralized system like Sun's <a
href="http://www.jxta.org">JXTA</a>. Some people mailed me to
mention Jabber as a messaging platform and other people
pointed out to the <a
href="http://java.sun.com/products/jms/">Java Message
Service</a>. The JMS does support a number of very
interesting features that are worth researching.
It could also just use the user e-mail address as the `key' to
choose the registrar (msn.com, hotmail.com -> passport.com;
aol.com -> aol.passport.com; you get the idea).
The <a
href="http://www.soapware.org/xmlStorageSystem">xmlStorage</a>
idea from <a href="http://www.scripting.com">Dave Winer</a>
could be used to store the information.
A toolkit for various popular web servers could be provided,
authenticated and should be open sourced (for those of you who
think that a binary program would give more security and would
prevent people from tampering: you are wrong. You can always
use a proxy system that "behaves" like the binary, and passes
information back and forth from the real program, and snoops
in-transit information).
Good cryptographers need to be involved in this problem to
figure out the details and the possible insecure pieces of a
proposal like this.
** Implementation: In short
To keep it short: <b>DNS, JXTA, xmlStorage.</b>
** Deploying it
The implementation of such a system should be a pretty
straightforward task once security cryptographers have
designed such a beast.
The major problems are:
<ul>
* <b>People might just not care:</b> In a poll to US
citizens a couple of decades ago, it was found that
most people did not care about the rights they were
given by the Bill of Rights, which lead to a number of
laws to be passed in the US that eliminated most of
the rights people had.
* <b>The industry will move way too slow:</b>
Microsoft's implementation is out in the open now: it
is being deployed, and soon it will be insinuated to
many, many users. The industry needs to get together
soon if they care about this issue.
By the time the industry reacts, it might be too
late.
</ul>
** Passport and Mono
The .NET class libraries include a Passport class that
applications might use to authenticate with Passport. Since
we do not have information at this point on the exact protocol
of Passport, it is not even feasible to implement it.
If at some point the information is disclosed, it could be
implemented.
If a competing system to Passport existed, we could probably
hide all the authentication information to use a number of
different passport-like systems.
If a user does not want to use Passport at all, he could
always turn it off (or completely remove the class from the
library). After all, this is free software.
Currently, we are too far from the point where this is a real
issue.
** Passport and endangering Open Source.
A few people have said: `Mono will allow Passport to be
available for Linux and that is bad'. This is plain
misinformation.
Currently, you can obtain Passport for Linux from Microsoft
itself and deploy it today on your Web server. Mono does not
even enter the picture here. Go to passport.com and download
the toolkit and you will see with your own eyes that passport
is <B>already</b> available for Linux.
** Disclaimer
This is just a group of personal thoughts of mine that I have
placed here because I get asked this question a lot lately.
The views of this page are not a statement from my employer
(Ximian, Inc).
This is not part of Mono. We are not trying to deal with this
problem.
Nat Friedman (Ximian's co-founder) has his own ideas on how a
competing system to Passport could be designed, but I will let
<a href="http://www.nat.org/">him</a> post his own story.
** Other Passport Comments
An interesting study on the security of passport is available at: <a
href="http://avirubin.com/passport.html">http://avirubin.com/passport.html</a>
** Other Alternatives
Some people have pointed out <a
href="http://www.xns.org">XNS</a>
Send comments to me: Miguel de Icaza (<a
href="mailto:[email protected]">[email protected]</a>)
+14
View File
@@ -0,0 +1,14 @@
** Microsoft and GNU and Linux.
Q: Does this mean that Microsoft is better than Linux?
A: Many of us are working on <a
href="http://www.gnu.org/philosophy/free-sw.html">free software<a>
and want to have an <a href="http://www.opensource.org">open
source</a> environment that we can change, modify, improve, learn
from, and share with others. Some of us also think that this will
lead on the long run to better software: more efficient, faster,
more robust and more.
We are willing to take good ideas from any source they come from.
Executable
+15
View File
@@ -0,0 +1,15 @@
* Plans
Here we are tracking some plans to particular pieces of
technology that are part of Mono.
This is just a repository of information that is handy for
contributors.
Currently you can read our plans for <a
href="ado-net.html">ADO.NET</a>, <a
href="asp-net">ASP.NET</a>, <a href="java.html">Java</a> and
<a href="winforms.html">WinForms</a>.
+63
View File
@@ -0,0 +1,63 @@
* How to port Mono to your preferred architecture
** Endian, 64 bits and unaligned access issues
The first thing to do is to check that the metadata handling
library works on your target processor. You may use the disassembler
on simple programs and check that you get sensible results
(assuming it compiles at all on your system:-).
The main issue is to write macros that read unaligned
little endian shorts/ints/longs/float/doubles: look into
mono/metadata/endian.h. There may be other spots in the code that are
unsafe at reading/writing to some datatypes that require special
alignment, but there should be few such issues and they need to be fixed.
Once this stuff is sorted out, you should be able to run the interpreter
on simple programs that don't require delegates, P/Invoke functions etc..
** Generating assembly bytecodes for the target processor
Next, you need to provide the support code for generating assembly bytecode
for your target platform (in mono/arch/{ppc,sparc,alpha,*}).
The code should be more or less like the code in x86-codegen.h:
macros that produce fast in-line code. You don't need to provide
code to create every possible code, at first, just the code to
create trampolines and execute them is fine (you'll need to research
how the call convention works on your platform): that would be, for
example, the prolog and epilog code in a function, code to pass function
parameters and deal with the return value and so on.
libffi in gcc or the xptcall sources in mozilla may be helpful to
understand how the calling convention works, if you can't find a specification.
You'd need a processor manual to know how to create the assembly binary data.
This requires a lot of reading if you're not familiar with the assembly for your
target platform. Manuals for many processors are available as PDF files on the
web site of the respective vendors. Note that some processors require you to
flush the I-cache before executing the code: have a look at how the same thing is
done in GNU lightning.
** Getting the interpreter to work
Once you can generate binary code, you can start working on a
mono_create_trampoline() function for your platform: this function will receive
a MonoMethod that describes the arguments and the return type of a C function
and will create the code to call such function. When this function is complete
you'll be able to run more sample programs, that use System.IO, P/Invoke
functions etc.
To support delegates you'll need to write a mono_create_method_pointer()
function that creates a native function: this can be used to call the
method using the runtime's calling convention (it's basically the reverse
of mono_create_trampoline()).
** The final step: porting the JIT
At this point you'd need to have a more complete code generation header file
and you can start writing the machine description file for the monoburg
system. This code (jit/tesjit.c) will require some machine specific tweaks,
but hopefully all you have to do is create the grammar that emit assembly
code from the IR tree. Work is at the early stages also for x86 on this stuff
as we are still testing various solutions: you'd want to read about burg-like
code-generator generators (the LCC book is a good starting point).
+578
View File
@@ -0,0 +1,578 @@
* PostgreSQL Data Provider
There are two ADO.NET data providers for <a href="http://www.postgresql.org/">PostgreSQL</a> in Mono:
<ul>
<li><a href="http://gborg.postgresql.org/project/npgsql/projdisplay.php">Npgsql</a>
<ul>
<li>a .NET Managed Data Provider for PostgreSQL
<li>Written in 100% C#</li>
<li>does not require a client library</li>
<li>works on Mono and Microsoft .NET</li>
<li>created by Francisco Figueiredo jr. and has many developers working on it
<li>works in the SQL# (command-line and GTK# GUI versions)</li>
<li>in namespace Npgsql and assembly Npgsql and is found in mcs
at mcs/class/Npgsql</li>
</ul>
</li>
<li>Mono.Data.PostgreSQL (deprecated)
<ul>
<li>Deprecated in favor of Npgsql</li>
<li>Exists in namespace Mono.Data.PostgreSql and assembly Mono.Data.PostgreSql</li>
<li>Is a Mono Data Provider for the <a href="http://www.postgresql.org/">PostgreSQL</a>
client/server database management system.</li>
<li>Written in C# and has C# bindings to the PostgreSQL C Client library pq.dll on Windows
and libpq.so on Linux.</li>
</ul>
</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
Below, see separate Testing sections for Npgsql and Mono.Data.PostgreSqlClient.
** Current Status
<ul>
<li>Npgsql
<ul>
<li>Builds and Runs on both Microsoft .NET and Mono.</li>
<li>Works using SQL# (command-line and GTK# versions)</li>
<li>You can send insert, update, delete queries
through NpgsqlCommand.ExecuteNonQuery() method.</li>
<li>You can send queries like, select count(*) from table, select version()
with NpgsqlCommand.ExecuteScalar() method.</li>
<li>There is logging support. (Thanks Dave Page)
To use it, place code like that in your program:</li>
<pre>
// Enable logging.
NpgsqlEventLog.Level = LogLevel.Debug; // LogLevel.
NpgsqlEventLog.LogName = "NpgsqlTests.LogFile"; // LogFile.
</pre>
<li>You can use Npgsql with Mono (Thanks Kristis Makris). It is not working perfectly.</li>
<li>There is a winforms test suite (Thanks Dave Page).</li>
<li>Clearer code in NpgsqlConnection removing *magic* numbers and constants. (Thanks Kristis Makris)</li>
<li>Better support of ODBC-like ConnectionString in NpgsqlConnection (Thanks Dave Page)</li>
<li>Thanks Ulrich Sprick for all discussion and ideas.</li>
</ul>
</li>
<li>Mono.Data.PostgreSQL status
<ul>
<li>Deprecated in favor of Npgsql</li>
<li>We are able to do simple CREATE TABLE, DROP TABLE, UPDATE, INSERT, and
DELETE SQL commands using the ExecuteNonQuery method in PgSqlCommand.</li>
<li>We can execute multiple queries and do a NextResult() in PgSqlDataReader()
to get the next result set.</li>
<li>We are also able to do simple aggregate functions,
ie, count(), sum(), min(), and max()
in a simple SELECT SQL query using the ExecuteScalar() now.</li>
<li>We are also able to retrieve data with a simple SELECT SQL query
using ExecuteReader() which returns a PgSqlDataReader. We are able to
use GetSchemaTable() to get the meta data about the table columns.
We are able to Read() to get each row from the result set.</li>
<li>We are able to get
String data (char, character, text, varchar), Int16 (smallint),
Int32 (integer), Int64 (bigint), DateTime (time, date, timestamp),
Boolean (boolean), Single (float), and Double (double).
More data types will come later. Note, the types that do work still
need thorough testing.</li>
<li>Rows that are returned which contain columns that are NULL are handled now.
The PgSqlDataReader method IsDBNull() needs to be called to determine
if a field IS NULL before trying to read data from that field.</li>
<li>Calling PostgreSQL stored procedures works. It does not work perfectly.
It may not
even work to specification - yet. If you want to test it yourself, look at
TestSqlDataReader.cs or PostgresTest.cs in
mcs/class/System.Data/Test.</li>
<li>Below, I have some sample code you can
use to call a PostgreSQL stored procedure named "version". This stored
procedure returns a string containing the PostgreSQL server version. Notice
the CommandType is StoredProcedure and the method ExecuteScalar() is called.</li>
<li>ExecuteScalar() is a lightweight method in class PgSqlCommand that only returns
one row and one column as one object - even if there is more than row or column.</li>
<li>We have the beginnings of Parameters support PostgreSQL. Only
Input Parameters are currently supported. Output, Input/Output,
and Return parameters still need to be done.</li>
<li>A lot of Exceptions need to be thrown for various exceptions. However,
PgSqlException, PgSqlErrorCollection, and PgSqlError have been partially
implemented.</li>
<li>Tim Coleman and Rodrigo Moya got the beginnings of the
PgSqlDataAdapter/DataSet/DataTable/DataRow to work. Currently,
the PgSqlDataAdapter can Fill() relational data into a DataTable in a DataSet.
See the test mcs/class/System.Data/Test/TestSqlDataAdapter.cs to see it in action.</li>
<li>Works in the SQL# command-line version
and the GTK# version on Linux. It only works in SQL# command-line version
on Windows.</li>
</ul>
</li>
</ul>
** Action Plan
<ul>
<li>More testing and fixing bugs</li>
<li>Better error handling</li>
<li>More Data Types to use</li>
<li>Any features for Npgsql should be implemented in Npgsql's main cvs repository at
gborg.postgresql.org. Most bugs should be fixed in gborg.postgresql.org's cvs.
Only bugs neccessary for building and running of Npgsql on Mono can be done in Mono cvs,
but once applied they should be sent to Npgsql's mailing list
at gborg.postgresql.org for inclusion into cvs there. Whenever there is
a release of Npgsql (determined by Francisco Figueiredo jr. or a release
of Mono (determined by Miguel de Icaza), then the Npgsql source
in gborg.postgresql.org's cvs will be used to update the Npgsql source in
Mono's cvs.
</li>
<li>Mono.Data.PostgreSqlClient even though deprecated can still
accept bug fixes. This is because other areas, such as, ASP.NET examples
may still use this provider.</li>
<li>Add any missing functionality to Npgsql. If this funtionality works on
.NET but not on Mono, implement the missing features or fix the bugs in Mono</li>
<li>Npgsql has replaced Mono.Data.PostgreSqlClient as the provider of
choice to use. However, Mono.Data.PostgreSqlClient will remain in a
deprecated state until nobody uses it anymore - then it can be removed</li>
<li>Implement more of PostgreSQL 7.3 features in Npgsql</li>
</ul>
** Testing Mono.Data.PostgreSqlClient
<ul>
* <p>In order to test Mono.Data.PostgreSqlClient, you will need to have
access to a remote PostgreSQL DBMS, or you will have to install
one locally. PostgreSQL was the first ADO.NET provider created in Mono.
<p>Why use PostgreSQL? Because it is free software, has a client
library that is easy to use, PostgreSQL is easy to install on
Unix and Windows (using the Cygwin install program), not difficult to setup after
installation, and it runs under: Linux,
Windows (via cygwin and ipc-daemon), Unix, and
others. This allowed us to create the
System.Data functionality in Mono much quicker.
<p>If you plan on using a remote PostgreSQL DBMS Server,
than you will need to have the PostgreSQL client software on your
local computer that includes libpq.so (pq.dll on Windows).
<p>The System.Data tests use this connection string to connect
to the PostgreSQL database named "test" at host "localhost" as
user "postgres".
<pre>
"Server=localhost;Database=test;User ID=postgres;Password=fun2db"
(or)
"host=localhost;dbname=test;user=postgres;password=fun2db"
</pre>
</ul>
<p>Installation instructions for PostgreSQL DBMS:
<b>On Unix</b>
<ul>
* Read the PostgreSQL Installation Instructions
at \usr\doc\postgresql-x.x.x\html\installation.html
* Depending on your Unix system,
PostgreSQL maybe already installed, a database user 'postgres' created,
a linux user 'postgres' created and initdb ran. Or maybe not.
<pre>
su
adduser postgres
mkdir /usr/local/pgsql/data
chown postgres /usr/local/pgsql/data
su - postgres
initdb -D /usr/local/pgsql/data
postmaster -i -D /usr/local/pgsql/data
createdb test
psql test
</pre>
* Make sure you have a database user named postgres. It is best to install
the PostgreSQL DBMS under linux user postgres. When you run the postmaster,
run it under the user postgres as well. If this was not done, then you
will need to create a user named postgres for the System.Data tests.
* If you already installed PostgeSQL and you do not have a database
user named postgres, then you can create user postgres using psql:
<pre>
psql test
create user postgres with password 'fun2db';
</pre>
* The postmaster must be run with -i option.
* In the /usr/local/pgsql/data/pg_hba.conf file, you need
to have the AUTH_TYPE set to md5. You can read more on this at
/usr/doc/postgresql-7.2.1/html/client-authentication.html
or wherever your
PostgreSQL html docs are located. See the 2nd line below,
host 127.0.0.1 has an AUTH_TYPE md5 in pg_hba.conf.
<pre>
# TYPE DATABASE IP_ADDRESS MASK AUTH_TYPE
local all trust
host all 127.0.0.1 255.255.255.255 md5
</pre>
* If you can not find your PostgreSQL documentation locally or you
did not install it, then you
can get it <a href="http://www.postgresql.org/idocs/">here</a>.
</ul>
<b>On Windows</b>
<ul>
* Use the <a href="http://www.cygwin.com/">Cygwin</a> installer to
install the PostgreSQL DBMS. It is
found in the database category.
* <p>Read the file postgres-x.x.README at /usr/doc/Cygwin and read
the requirements to install PostgreSQL. Those requirements
are included with cygwin except cygipc. A default installtion
of cygwin does not install everything you will need, so on the
safe side, just include everything when installing cygwin.
* <p>The -x.x in postgres-x.x is the version of your PostgreSQL DBMS.
* <p>Once Cygwin has installed the PostgreSQL DBMS on your computer,
read the file FAQ_MSWIN which is available
in /usr/doc/postgres-x.x
* <p>Important notes from this file are:
<ul>
<p><b>2.</b> - Install the latest <a href="http://www.neuro.gatech.edu/users/cwilson/cygutils/cygipc/index.html">CygIPC</a> package.
Cygwin includes a utility bunzip2 which can be used to unzip it. Now, change to
the root directory by
typing "cd /" then
you can use "tar xvf cygipc.xxx.tar" to untar it
in the root directory in cygwin.
<p>The cygipc package contains the support to run ipc-daemon
that you will need
to run before you can
run the PostgreSQL DBMS Server daemon (postmaster) or run
initdb which initializes the PostgreSQL database.
<p><b>3.</b> The Cygwin bin directory has to be placed in
the path before the Windows program directories,
for example, C:\cygwin\bin
<p><b>My own note.</b> In the Windows control panel, I set
the environment variables PATH to my cygwin /usr/local/bin,
/usr/bin, and /bin. I also set my LD_LIBRARY_PATH to
/usr/local/lib and /usr/lib. For example:
<p>
<pre>
PATH=c:\cygwin\usr\local\bin;c:\cygwin\usr\bin;c:\cygwin\bin;
LD_LIBRARY_PATH=c:\cygwin\usr\local\lib;c:\cygwin\usr\lib;
</pre>
<p><b>4.</b> Start the ipc-daemon that came with the cygipc
package. There
are two ways to do this: run it from the command line as:
<p>
<pre>
ipc-daemon &
</pre>
<p>or you can set it up as a Windows service. See the
file cygrunsrv.README at /usr/doc/Cygwin on how to do this
for ipc-daemon and postmaster. Note the
troubleshooting section at the end of
the cygrunsrv.README file.
<p>To install ipc-daemon as a service,
you just have to run
<p>
<pre>
ipc-daemon --install-as-service' (--remove-as-service)
</pre>
<p>and then run
<pre>
net start ipc-daemon
</pre>
</ul>
<p>Read the installation.html file
at /usr/doc/postgresql-x.x/html/installation.html
<p>You will see in this file that you will need to
run the following commands:
<p>
<pre>
mkdir /usr/local/pgsql/data
initdb -D /usr/local/pgsql/data
postmaster -D /usr/local/pgsql/data
createdb test
psql test
</pre>
<p>When you need to connect to the database,
you will need ipc-daemon and postmaster running. Start ipc-daemon
before any of the command above. If you restart your computer, you
need to start ipc-daemon and postmaster either manually or as a
service.
<p>psql is a command-line PostgreSQL client tool to
enter and run SQL commands and queries.
<p>If there is no database user named postgres, create a user named
postgres with the following SQL command in the client tool psql:
<p>
<pre>
psql test
create user postgres with password 'fun2db';
</pre>
<p>The only reason I say this is so you can easily use the System.Data tests
without having to change the database, userid, etc.
</ul>
<p>In the path mcs/class/System.Data/Test
there is a test for Mono.Data.PostgreSqlClient named
PostgreTest.cs. Thanks goes to Gonzalo for creating the original
PostgreSQL test.
<p>
To compile the PostgresTest.cs program, do:
<p>
<pre>
mcs PostgresTest.cs \
-r System.Data.dll \
-r Mono.Data.PostgreSqlClient.dll
</pre>
<p>If there are compile errors, such as, can not convert IDbConnection
to PgSqlConnection, then you need to run mcs like:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
PostgresTest.cs \
-r System.Data.dll \
-r Mono.Data.PostgreSqlClient.dll
</pre>
<p>
To run using mint, do:
<p>
<pre>
mint PostgresTest.exe
</pre>
<p>
To run using mono, do:
<pre>
mono PostgresTest.exe
</pre>
<p>C# Example for Mono.Data.PostgreSqlClient:
<pre>
using System;
using System.Data;
using Mono.Data.PostgreSqlClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=postgres;" +
"Password=fun2db;";
IDbConnection dbcon;
dbcon = new PgConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname" +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.PostgreSqlClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.PostgreSqlClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
** Testing Npgsql
<ul>
<li>Have a working mono and mcs</li>
<li>Get <a href="http://gborg.postgresql.org/project/npgsql/projdisplay.php">Npgsql</a>
and make sure the binary assembly Npgsql.dll is installed in the same place that the
mono class libraries are located.
<li>Read the Testing notes for Mono.Data.PostgreSqlClient too
<li>C# Example for Npgsql:
<pre>
using System;
using System.Data;
using Npgsql;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=postgres;" +
"Password=fun2db;";
IDbConnection dbcon;
dbcon.Open();
dbcon = new NpgsqlConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Npgsql.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Npgsql.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+33
View File
@@ -0,0 +1,33 @@
* Mono PowerPC Port
** Status
It passes and compiles the same amount of mono tests as on the x86 architecture.
mcs is self hosting on Linux/PPC.
*** Interpreter
Up to date.
*** Jitter
Start the port
** Documentation
*** PowerPC architecture:
<A HREF="http://e-www.motorola.com/brdata/PDFDB/docs/MPCFPE32B.pdf">PowerPC Programming environments manual</A><BR>
<A HREF="http://e-www.motorola.com/brdata/PDFDB/docs/MPC7410UM.pdf">G4 (7410) User's manual</A>
There's a very nice introduction to PowerPC assembly language
at <a
href="http://www-106.ibm.com/developerworks/library/l-ppc/">http://www-106.ibm.com/developerworks/library/l-ppc/</a>.
*** Calling conventions:
<a href="http://www.esofta.com/softspecs.html">The PowerPC SystemV ABI specification</a>
+15
View File
@@ -0,0 +1,15 @@
#!/bin/sh
MANAGED_CALLS=`gdb -silent $1 -pid $2 << EOF | awk '/.* in \?\? \(\)/ {printf("call print_method_from_ip(%s)\n", $2);}'
set height 0
thread apply all bt
quit
EOF`
gdb -silent $1 -pid $2 << EOF
set height 0
thread apply all bt
$MANAGED_CALLS
quit
EOF
Executable
+24
View File
@@ -0,0 +1,24 @@
* Open Projects
The .NET framework is a good first in terms of a new
development foundation, but it falls short of providing
higher-level components or building blocks for people to
reuse.
A few ideas of projects and classes that would be useful to
develop applications follows:
** EOG component
** XmlStorageSystem component
* Gtk# related projects
Gnome Canvas Bindings.
Bezier Canvas Item Binding.
* Graphical bindings
Binding for the Libart library
+156
View File
@@ -0,0 +1,156 @@
* Provider Factory
<p>Brian Ritchie contributed a Provider Factory and Data Tools for Mono ADO.NET<br>
which gives us a foundation for abstract data provider access within Mono
** Here are the deails:
<ul>
<li>The Provider information is seperate from the connection string information.<br>
This allows the list of providers to be stored in the machine.config file.</li>
<li>Provider and ProviderCollection objects are available to access <br>
the list of providers and modify them at runtime.</li>
<li>The ProviderFactory object is used to create new connections, commands,<br>
dataadapters, parameters, etc.</li>
</ul>
** Overview of the ProviderFactory object model:
<ul>
<li><b>ProviderFactory</b>: used to create new Connections, Commands,<br>
DataAdapters, or Commands. All objects are returned using <br>
the provider interfaces such as IDbConnection, IDbCommand,<br>
IDbDataAdapter, or IDataParamter</li>
<li><b>DataTools</b>: static methods for doing <br>
common tasks like filling a DataSet <br>
with the contents of a select statement.</li>
<li><b>ProviderCollection</b>: list of providers configured <br>
in the system. Initially loaded from app.config, but can <br>
be modified at run-time.</li>
<li><b>Provider</b>: represents a given provider (factory) <br>
and holds information needed to <br>
create the types.</li>
<li><b>ProviderSectionHandler</b>: works behind the <br>
scenes to load the list of <br>
providers from the app.config into a ProviderCollection.</li>
</ul>
** C# source code samples for creating a connection:
<pre>
// Create connection using enhanced connection string
// The factory attribute specifies which provider
// to use. The factory attribute is parsed out, the
// object is created, and then the rest of the
// connection string is passed into the provider. The
// providers are defined in
// the app.config (or machine.config).
IDbConnection conn;
string connectionString =
"factory=System.Data.SqlClient;" +
"server=speedy;database=pubs;uid=sa";
conn = ProviderFactory.CreateConnection(connectionString);
// Create connection specifying provider
// and standard connection string
IDbConnection conn;
string provider = "System.Data.SqlClient";
string connectionString = "server=speedy;database=pubs;uid=sa";
conn = ProviderFactory.CreateConnection(provider,connectionString);
// Create connection using connection string stored
// in app.config under &lt;appSettings&gt;
IDbConnection conn;
string appSetting = "PubsConnStr";
conn = ProviderFactory.CreateConnectionFromConfig(appSetting);
</pre>
<p>C# Sample for Creating a DataAdapter and filling a DataSet.
<pre>
// Create Connection
IDbConnection conn =
ProviderFactory.CreateConnectionFromConfig("PubsConnStr");
// Select command
IDbCommand cmd=conn.CreateCommand();
cmd.Text="select * from author";
// Data Adapter
DataSet ds=new DataSet();
IDbDataAdapter adapter=ProviderFactory.CreateDataAdapter(cmd);
adapter.Fill(ds, "Table1");
</pre>
<p>Creating a DataAdapter and filling a DataSet. <br>
The super lazy method for people like me.
<pre>
// Create Connection
IDbConnection conn =
ProviderFactory.CreateConnectionFromConfig("TdsPubsConnStr");
// Data Adapter
DataSet ds=DataTools.FillDataSet(conn, "select * from author");
</pre>
<p>Here's some sample code on displaying a list <br>
of configured ADO.NET providers:
<pre>
Console.WriteLine("Configured Providers:");
foreach (Provider p in ProviderFactory.Providers)
Console.WriteLine(p.Description);
</pre>
<p>A Super lazy overload to the FillDataSet method (in <br>
DataTools.cs) that will fill a dataset in one line of code.
<pre>
DataSet ds=DataTools.FillDataSet("PubsConnStr", "select * from authors");
</pre>
** About Configuration Files
<p>Information about <a href="http://msdn.microsoft.com/library/en-us/vbcon/html/vboriintroductiontoapplicationsettingstorage.asp?frame=true">app.config</a> files
can be found at <a href="http://msdn.microsoft.com/">MSDN</a>.
<p>See the mcs/class/Mono.Data/app.config for sample configuration file in<br>
mcs source. Basically, if your application is named blah.exe, <br>
you would create an app.config file named blah.exe.config
<p>Here's a sample app.config file showing the provider <br>
declarations along with sample connection strings:
<pre>
&lt;?xml version="1.0" encoding="utf-8" ?&gt;
&lt;configuration&gt;
&lt;configSections&gt;
&lt;sectionGroup name="mono.data"&gt;
&lt;section name="providers" type="Mono.Data.ProviderSectionHandler,Mono.Data" /&gt;
&lt;/sectionGroup&gt;
&lt;/configSections&gt;
&lt;appSettings&gt;
&lt;add key="PubsConnStr" value="factory=System.Data.SqlClient;server=speedy;database=pubs;uid=sa;pwd=" /&gt;
&lt;/appSettings&gt;
&lt;mono.data&gt;
&lt;providers&gt;
&lt;provider name="System.Data.SqlClient" connection="System.Data.SqlClient.SqlConnection" adapter="System.Data.SqlClient.SqlDataAdapter" assembly="System.Data, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/&gt;
&lt;provider name="System.Data.OleDb" connection="System.Data.OleDb.OleDbConnection" adapter="System.Data.OleDb.OleDbDataAdapter" assembly="System.Data, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/&gt;
&lt;provider name="System.Data.Odbc" connection="System.Data.Odbc.OdbcConnection" adapter="System.Data.OleDb.OdbcDataAdapter" assembly="System.Data, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/&gt;
&lt;provider name="Mono.Data.TdsClient" connection="Mono.Data.TdsClient.TdsConnection" adapter="Mono.Data.TdsClient.TdsDataAdapter" assembly="Mono.Data.TdsClient" /&gt;
&lt;provider name="Mono.Data.MySql" connection="Mono.Data.MySql.MySqlConnection" adapter="Mono.Data.MySql.MySqlDataAdapter" assembly="Mono.Data.MySql" /&gt;
&lt;provider name="Mono.Data.PostgreSqlClient" connection="Mono.Data.PostgreSqlClient.PgSqlConnection" adapter="Mono.Data.PostgreSqlClient.PgSqlDataAdapter" assembly="Mono.Data.PostgreSqlClient" /&gt;
&lt;provider name="Mono.Data.SqliteClient" connection="Mono.Data.SqliteClient.SqliteConnection" adapter="Mono.Data.SqliteClient.SqliteDataAdapter" assembly="Mono.Data.SqliteClient" /&gt;
&lt;provider name="Mono.Data.SybaseClient" connection="Mono.Data.SybaseClient.SybaseConnection" adapter="Mono.Data.SybaseClient.SybaseDataAdapter" assembly="Mono.Data.SybaseClient" /&gt;
&lt;/providers&gt;
&lt;/mono.data&gt;
&lt;/configuration&gt;
</pre>
+199
View File
@@ -0,0 +1,199 @@
* The Mono Project
** Background.
The GNOME project goal was to bring missing technologies to
Unix and make it competitive in the current market place for
desktop applications. We also realized early on that language
independence was important, and that is why GNOME APIs were
coded using a standard that allowed the APIs to be easily
wrapped for other languages. Our APIs are available to most
programming languages on Unix (Perl, Python, Scheme, C++,
Objective-C, Ada).
Later on we decided to use better methods for encapsulating
our APIs, and we started to use CORBA to define interfaces to
components. We complemented it with policy and a set of
standard GNOME interfaces for easily creating reusable,
language independent components, controls and compound
documents. This technology is known as <a
href="http://developer.ximian.com/articles/whitepapers/bonobo">Bonobo</a>.
Interfaces to Bonobo exist for C, Perl, Python, and
Java.
CORBA is good when you define coarse interfaces, and most
Bonobo interfaces are coarse. The only problem is that
Bonobo/CORBA interfaces are not good for small interfaces.
For example, an XML parsing Bonobo/CORBA component would be
inefficient compared to a C API.
** Another explanation
I recently explained our motivations to Dave Winer, and he posted
it <a
href="http://scriptingnews.userland.com/stories/storyReader$1275">here</a>
** Microsoft's .NET
The Microsoft .NET initiative is confusing because it is a
company wide effort that ranges from development tools to end
user applications. .NET is a branding formative that
has been applied to:
<ul>
* The .NET development platform, a new platform for
writing software.
* Web services.
* Microsoft Server Applications.
* New tools that use the new development platform.
* Hailstorm, the Passport centralized single-signon
system that is being integrated into Windows XP.
</ul>
Mono is an implementation of the .NET development platform.
** The Common Language Infrastructure platform.
Microsoft has created a new development platform. The
highlights of this new development platform are:
<ul>
* A runtime environment that provides garbage
collection, threading and a virtual machine
specification (The Virtual Execution System, VES)
* A comprehensive class library.
* A new language, C#. Very similar to Java, C#
allows programmers to use all the features available
on the .NET runtime.
* A language specification that compilers can
follow if they want to generate classes and code
that can interoperate with other programming
languages (The Common Language Specification: CLS)
</ul>
The Common Language Infrastructure platform is similar to the
goals we had in GNOME of giving language independence to
programmers. It is more mature, documented, larger in scope,
and has a consistent design.
Any API that is written using a CLS provider language can be
used by any language that is a CLS consumer. Compilers
generate code in a format called Common Intermediate Language
(CIL) which is an intermediate representation of a compiled
program and is easy to compile to native code or compiled
using Just-in-Time (JIT) engines. The restrictions placed by
the runtime on the CIL byte codes ensures that it is possible
to do a good job at optimizing the code in a JIT compiler.
There is not really a lot of innovation in this platform: we
have seen all of these concepts before, and we are all
familiar with how these things work.
What makes the Common Language Infrastructure development
platform interesting is that it is a good mix of technologies
that have been nicely integrated.
The .NET development platform is essentially a new foundation
for program development that gives Microsoft a room to grow
for the coming years.
** ECMA standards.
Microsoft has submitted the
specifications of C#, the runtime, the metadata and the
other various bits of the .NET development platform to the
<a href="http://www.ecma.ch">ECMA</a> for standarization.
You can get a copy of the specifications submitted to ECMA
from: <a href="http://www.dotnetexperts.com/ecma">http://www.dotnetexperts.com/ecma</a>
** Mono: an Open Source Common Language Infrastructure implementation.
Ximian has begun work on Mono, a project that aims to bring
the Common Language Infrastructure platform to free systems.
When the GNU project was launched, they picked the best
operating system that was available out there, and they
began to clone it: Unix.
The .NET development platform is a very rich, powerful, and
well designed platform that would help improve the free
software development platform. Just like the GNU project
began to clone Unix sixteen years ago, we will be cloning the
.NET development platform because it is a great platform to
build on.
** What makes up Mono?
There are various pieces that make up Mono today:
<ul>
* A C# compiler.
* The Virtual Execution System: that has the
Just-in-Time compiler, garbage collector, loader,
threading engine.
A byte code interpreter is provided for quickly
porting Mono to new systems and debugging the JIT
purposes, but it is not intended to be the ideal
execution environment.
* An implemenation of the .NET class libraries:
Remoting, Reflection, Reflection.Emit, Xml, Xpath,
Xslt, Xml Serialization, Web Services support.
* Cross platform class libraries for data access:
Postgress, MySQL, DB2, TDS, Sybase, Oracle, ODBC and
Gnome's GDA.
* Unix class libraries: Mono.Posix
* Gnome-specific class libraries: The Gtk# family.
* A code pre-compiler to generate native code ahead of
time.
* Gtk# a toolkit to develop GNOME applications on Unix
and Windows.
* An implementation of the Remoting infrastructure in
.NET
</ul>
Other work-in-progress components:
<ul>
* A VB.NET compiler and JScript compilers are in the works.
* Web services on the server side.
* We are planning to include Remoting.CORBA as part of
Mono standard distribution.
</ul>
** Why use GNOME components?
GNOME is an umbrella project that consists of infrastructural
components (GUI toolkit, XML libraries, CORBA implementation,
printing architecture, imaging system), a desktop environment,
and productivity applications.
The GNOME infrastructural components can be used to quickly
implement various pieces of the class libraries without reinventing
the wheel, and since all those components are licensed under
the terms of the GNU LGPL it is a perfect fit.
Libart will be used to implement the Drawing.2D API; Gtk+ and
the GNOME libraries will be used to implement the WinForms
API and of course Glib and libxml will be used in various
places.
+46
View File
@@ -0,0 +1,46 @@
To: [email protected], [email protected]
Subject: July 12 snapshots.
FCC: ~/Mail/outbox.txt
X-Windows: Sometimes you fill a vacuum and it still sucks.
--text follows this line--
Hey!
July 12 snapshots of class libraries, the compiler and the mono
runtime are available.
New on this release:
* Runtime (module: mono)
The beginning of a simple interpreter that Paolo started
workign on (can run really simple .NET programs).
Disassembler copes with more elements of the binary format and
more tokens are decoded. Paolo is working now on moving some
of these to the metadata library.
More tables are dumped.
* Class libraries (module: mcs/class)
Many new more classes are in from Joe, Vladimir, Jeff, Sean
and yours truly.
Sean fixed the build process, and it is now possible to
compile with a single command the assemblies. We will be
revisiting this mechanism in the future to compile per-OS
assemblies (ie, Unix, Windows, MacOS, etc).
* Compiler (module mcs/mcs)
Not much done this week, just a few fixes here and there, and
more work to make it easy to compiler.
* Documentation (module: mono/doc)
All the changes to the web site are there for your browsing
pleasure. We still need to integrate the status system in
there.
Miguel.
+43
View File
@@ -0,0 +1,43 @@
To: [email protected]
Subject: Sunday snapshot available.
Gcc: mail.2001-07
--text follows this line--
Hey guys,
I promise I will not be doing these so often once we have the CVS
server up. In the meantime:
* MCS
Sean got the classes to compile in a single go. You
will need CygWin (www.cygwin.org) to compile though
(GNU make and stuff is required).
System.Xml.XmlReader contribution from Jason
(WOOHHOO!!). It also contains a nice test-suite for
his functions, and in his new code bit, his
implementation is faster than Microsoft's
We now ship `jay' as part of the distribution to allow
you to compile the compiler with the same `make'
command. Small fixes to the parser as well were
introduced.
* Mono 0.4
Paolo's interpreter supports call instructions and has
the test suite program that he posted about.
All documentation ships now in the mono-0.4.tar.gz
Notes:
As usual, MCS is targeted to be compiled on a Windows machine
(you will need Cygwin).
Mono is targeted to be compiled on a Unix machine or a Windows
machine running Cygwin.
Miguel.
+248
View File
@@ -0,0 +1,248 @@
* Resources
There are a number of resources available for those of you who
want to contribute to the Mono project. Here are a few links.
If you want to send suggestions for links, address them to <a
mailto="[email protected]">[email protected]</a>.
** Microsoft .NET
The <a href="http://msdn.microsoft.com/net">Microsoft.NET site.</a>
The Microsoft .NET Framework can be downloaded <a
href="http://msdn.microsoft.com/library/default.asp?url=/downloads/list/netdevframework.asp">here</a>
New methods that are not documented in 1.0, are documented <a
href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndotnet/html/framewrkaddend.asp">here</a>
The changes between .NET 1.0 and .NET 1.1 are available <a href="http://www.csharphelp.com/archives2/archive406.html">here</a>
** IRC
Various Mono contributors get together on channel #mono on
irc.gnome.org
** Mono related sites.
The Mono Tutorial:
<a href="http://go-mono.com/tutorial/">GNOME.NET Tutorial</a>
and other useful tutorials (Gtk#, Glade#, Embeded, etc) (in Spanish) at
<a href="http://www.monohispano.org">The Mono Hispano site</a>.
Community site for Mono at <a href="http://www.gotmono.com">Got Mono</a>
Wikis: <a href="http://www.nullenvoid.com/gtksharp/wiki">Gtk# Wiki</a>
and <a href="http://www.nullenvoid.com/mono/wiki">Mono Wiki</a>.
Sergey's web page on Mono resources:
<a href="http://mono.eurosoft.od.ua">http://mono.eurosoft.od.ua</a>
Got Dot Net:
<a href="http://www.gotdotnet.com">Got Dot Net</a>
Got Mono:
<a href="http://www.gotmono.com">Got Mono</a>
MonoMail:
<a href="http://sourceforge.net/projects/monomail/">http://sourceforge.net/projects/monomail/</a>
Zip classes:
Mike's port to .NET: <a
href="http://www.icsharpcode.net/OpenSource/NZipLib/default.asp">NZipLib</a>
.NET Security:
A nice overview paper on the <a
href="http://www.foundstone.com/pdf/dotnet-security-framework.pdf">.NET
security architecture</a>.
** Development Tools
A tool to compare two assemblies:
<ul>
<li><a href="http://www.gotdotnet.com/userarea/keywordsrch.aspx?keyword=winchurn">http://www.gotdotnet.com/userarea/keywordsrch.aspx?keyword=winchurn</a>
</ul>
** Presentations
Currently the <a href="Presentations/O-Reilly">O'Reilly</a>
presentation on Mono is available. Arturo Espinosa has given
a talk on Mono in Mexico and made <a
href="http://construct.ximian.com/~arturo/Presentations/Mono.OLS/html">spanish
slides</a>
** ECMA Documentation.
You can get the documentation for the ECMA specs from:
<ul>
* <a href="http://www.ecma-international.org/publications/standards/ECMA-334.HTM">C# Language Specification</a>
* <a href="http://www.ecma-international.org/publications/standards/ECMA-335.HTM">Common Language Infrastructure</a>
</ul>
Older copies of the standard are available here:
<ul>
* <a href="http://msdn.microsoft.com/net/ecma">At MSDN</a>
* <a href="http://www.dotnetexperts.com">Dot Net Experts</a>
* <a href="http://developer.intel.com/software/idap/ecma">Intel</a>
* <a href="http://lightning.csse.monash.edu.au/.net/CLI">Monash University</a>
</ul>
These contain specifications for the assembler, the metadata,
byte codes supported by the CLI virtual machine, the C#
language and the core class libraries.
For details on the .NET class libraries, you can
visit the Microsoft's Developer Network:
<ul>
* <a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/cpref_start.asp">.NET Framework Class Library</a>
</ul>
You can also get this information if you install the Beta2
release of the .NET Framework.
** Discussion Groups.
<ul>
* <a href="http://www.oreillynet.com">O'Reilly
Network</a> has a <a
href="http://www.oreillynet.com/dotnet">section devoted to
.NET</a>
* <a
href="http://msdn.microsoft.com/newsgroups">MSDN</a> also
lists various newsgroups related to .NET</ul>
</ul>
** Other .NET related projects
There are a number of related projects to Mono:
<li><b>Development tools</b></li>
<ul>
* <a
href="http://www.icsharpcode.net/OpenSource/SD/default.asp">Sharp
Develop:</a> an IDE for the C# language written in C#.
* <a href="http://nunit.sourceforge.net">NUnit:</a> A
testing framework for .NET classes.
* <a
href="http://xmarks.sourceforge.net/doc.html">XMarks DOC.NET:</a> For
creating online documentation you can browse for your own classes.
* <a
href="http://www.cl.cam.ac.uk/~jds31/research/gccnet/">GCC .NET backend</a>.
Jeremy Singer has developed a .NET backend for GCC. This is research work.
</ul>
<li><b>Class Libraries</b></li>
<ul>
* <a href="http://9mm.com/~ogl/sdldotnet/">SDL for
.NET:</a> Bindings for the popular SDL graphics library.
* C# bindings for OpenGL and SDL are available here: <a
href="http://csgl.sourceforge.net">http://csgl.sourceforge.net</a>
* <a
href="http://qtcsharp.sourceforge.net">Qt#:</a>
C# bindings for the Qt toolkit.
* <a
href="http://codigolivre.org.br/projects/monoqle">Project MonoQLE:</a> a C# Message Queue Server.
Sorry only in portuguese, for now.
</ul>
<li><b>Programming languages:</b></li>
<ul>
* <a
href="http://janet-js.sourceforge.net/">Janet:</a>
an implemention of ECMAScript (the standarized
version of JavaScript) in C#
</ul>
<li><b>Other projects</b></li>
<ul>
* <a
href="http://www.improve-technologies.com/alpha/esharp/">Eclipse
Plugin for C#</a>
* <a href="http://www.kaffe.org">Kaffe:</a> A popular
Free Software JIT engine for Java.
* <a href="http://www.intel.com/research/mrl/orp">ORP:</a> A research
JIT/VM/GC system from Intel.
* <a
href="http://www.southern-storm.com.au/portable_net.html">Portable.NET:</a>
Another implementation of the CLI and C# compiler.
* A Free (GFDL) tutorial on C# in Spanish with
examples, slides, and extras (under development). Get it <a
href="http://geneura.ugr.es/~jaime/csharp/">here</a>.
</ul>
** GNOME Documentation
Documentation on GNOME, and the GNOME APIs is available from
the <a href="http://developer.gnome.org">developer</a> site at
GNOME:
<ul>
* <a href="http://developer.gnome.org/doc/API/">GNOME
API documentation</a>
* <a href="http://developer.gnome.org/doc/books">GNOME
Online books</a>
* <A
href="http://developer.gnome.org/arch/">Architecture Overview</a>
</ul>
** Assembly Language Manuals online
<ul>
* <a href="http://www.agner.org/assem/#optimize">
Pentium optimization tutorial</a> by Agner Fog
* <a href="http://webster.cs.ucr.edu/">
Art of Assembly</a> (x86 only)
* Documentation for various CPUs
(<a href="http://www.mit.edu/afs/sipb/contrib/doc/specs/ic/cpu/">
x86, IA64, MIPS, ARM, Alpha</a>)
* <a href="http://www.heyrick.co.uk/assembler/">
ARM Assembler</a> tutorial
* PowerPC
<a href="http://www-3.ibm.com/chips/techlib/techlib.nsf/techdocs/852569B20050FF7785256996007558C6">
Compiler Writer's Guide</a>
* <a href="http://www.lightsoft.co.uk/Fantasm/Beginners/begin1.html">
Beginners Guide to PowerPC Assembler</a>
</ul>
** Win32
<ul>
* Win32 <a href="http://www.jorgon.freeserve.co.uk/ExceptFrame.htm">
Structured Exception Handling (SEH)</a> internals (x86 specific)
</ul>
+30
View File
@@ -0,0 +1,30 @@
** MacOS Documentation
** Assembly Language Manuals online
Intel
MIPS
SPARC
** Microsoft
msdn.microsoft.com/net
Research.microsoft.com
** Related Technologies
<ul>
* The CLI allows people to create Web Services using the SOAP
protocol. SOAP is based on XML, XML schemas an the HTTP
protocol.
<ul>
* XML specification.
* XML Namespaces.
* XML Schemas.
* SOAP Specification.
</ul>
</ul>
** Compiler Information
GCC
GCC Sample front-end tutorial
+12
View File
@@ -0,0 +1,12 @@
* Roadmap
We are working on the following three projects at Ximian:
The C# Compiler (mcs/mcs)
A .NET compatible Class Library (mcs/class)
The JIT/interpreter (mono)
+203
View File
@@ -0,0 +1,203 @@
* The Mono runtime
The Mono runtime engine is considered feature complete.
It implements a Just-in-Time compiler engine for the CIL
virtual machine, the class loader, the garbage collector,
threading system and metadata access libraries.
We currently have two runtimes:
<ul>
* <b>mono:</b> Our Just-in-Time and Ahead-of-Time code
generator for maximum performance.
* <b>mint:</b> The Mono interpreter. This is an
easy-to-port runtime engine.
</ul>
We are using the Boehm conservative garbage collector.
The Mono runtime can be used as a stand-alone process, or it
can be <a href="embedded-api">embedded into applications</a> (see
the documentation in mono/samples/embed for more details).
Embedding the Mono runtime allows applications to be extended
in C# while reusing all of the existing C and C++ code.
Paolo Molaro did a presentation on the current JIT engine and
the new JIT engine. You can find his <a
href="http://primates.ximian.com/~lupus/slides/jit/">slides
here</a>
** Current JIT Engine: technical details (<b>updated, June 28th, 2003</b>)
We have re-written our JIT compiler. We wanted to support a
number of features that were missing:
<ul>
* Ahead-of-time compilation.
The idea is to allow developers to pre-compile their code
to native code to reduce startup time, and the working
set that is used at runtime in the just-in-time compiler.
Although in Mono this has not been a visible problem, we
wanted to pro-actively address this problem.
When an assembly (a Mono/.NET executable) is installed in
the system, it would then be possible to pre-compile the
code, and have the JIT compiler tune the generated code
to the particular CPU on which the software is
installed.
This is done in the Microsoft.NET world with a tool
called ngen.exe
* Have a good platform for doing code optimizations.
The design called for a good architecture that would
enable various levels of optimizations: some
optimizations are better performed on high-level
intermediate representations, some on medium-level and
some at low-level representations.
Also it should be possible to conditionally turn these on
or off. Some optimizations are too expensive to be used
in just-in-time compilation scenarios, but these
expensive optimizations can be turned on for
ahead-of-time compilations or when using profile-guided
optimizations on a subset of the executed methods.
* Reduce the effort required to port the Mono code
generator to new architectures.
For Mono to gain wide adoption in the Unix world, it is
necessary that the JIT engine works in most of today's
commercial hardware platforms.
</ul>
The JIT engine implements a number of optimizations:
<ul>
* Opcode cost estimates (our architecture allows
us to generate different code paths depending
on the target CPU dynamically).
* Inlining.
* Constant folding, copy propagation, dead code elimination.
Although compilers typically do
constant folding, the combination of inlining with
constant folding gives some very good results.
* Linear scan register allocation. In the past,
register allocation was our achilles heel, but now
we have left this problem behind.
* SSA-based framework. Various optimizations are
implemented on top of this framework
</ul>
There are a couple of books that deal with this technique: "A
Retargetable C Compiler" and "Advanced Compiler Design and
Implementation" are good references. You can also get a
technical description of <a
href="http://research.microsoft.com/copyright/accept.asp?path=http://www.research.microsoft.com/~drh/pubs/iburg.pdf&pub=ACM">lbrug</a>.
The new JIT engines uses three intermediate representations:
the source is the CIL which is transformed into a forest of
trees; This is fed into a BURS instruction selector that
generates the final low-level intermediate representation.
The instruction selector is documented in the following
papers:
<ul>
* <a href="http://research.microsoft.com/copyright/accept.asp?path=http://www.research.microsoft.com/~drh/pubs/interface.pdf&pub=wiley">A code generation interface for ANSI C</a>
* <a href="http://research.microsoft.com/copyright/accept.asp?path=http://www.research.microsoft.com/~drh/pubs/iburg.pdf&pub=ACM">Engineering efficient code generators using tree matching and dynamic programming.</a>
</ul>
** Garbage Collection
We are using the Boehm conservative GC. We might consider
adopting other GC engines in the future, like the Intel ORP GC
engine. The Intel ORP GC engine as it provides a precise
garbage collector engine, similar to what is available on the
.NET environment.
<ul>
* Garbage collection list and FAQ:<br>
<a href="http://www.iecc.com/gclist/">http://www.iecc.com/gclist/</a>
* "GC points in a Threaded Environment":<br>
<a href="http://research.sun.com/techrep/1998/abstract-70.html">
http://research.sun.com/techrep/1998/abstract-70.html</a>
* "A Generational Mostly-concurrent Garbage Collector":
<a href="http://research.sun.com/techrep/2000/abstract-88.html">
http://research.sun.com/techrep/2000/abstract-88.html</a>
* Details on The Microsoft .NET Garbage Collection Implementation:<br>
<a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmag00/html/GCI.asp">http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmag00/html/GCI.asp</a>
<a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmag00/html/GCI2.asp">http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmag00/html/GCI2.asp</a>
</ul>
** IO and threading
The ECMA runtime and the .NET runtime assume an IO model and a
threading model that is very similar to the Win32 API.
Dick Porter has developed WAPI: the Mono abstraction layer
that allows our runtime to execute code that depend on this
behaviour.
** Useful links
Paolo Molaro found a few interesting links:
<ul>
* On compilation of stack-based languages:<br>
<a href="http://www.complang.tuwien.ac.at/projects/rafts.html">
http://www.complang.tuwien.ac.at/projects/rafts.html</a>
* A paper on fast JIT compilation of a stack-based language:<br>
<a href="http://www.research.microsoft.com/~cwfraser/pldi99codegen.pdf">
http://www.research.microsoft.com/~cwfraser/pldi99codegen.pdf</a>
* Vmgen generates much of the code for efficient virtual machine (VM)
interpreters from simple descriptions of the VM instructions:<br>
<a href="http://www.complang.tuwien.ac.at/anton/vmgen/">
http://www.complang.tuwien.ac.at/anton/vmgen</a>
</ul>
** PInvoke
PInvoke is the mechanism we are using to wrap Unix API calls
as well as talking to system libraries.
Initially we used libffi, but it was fairly slow, so we have
reused parts of the JIT work to create efficient PInvoke
trampolines.
** Remoting
Mono has support for remoting and proxy objects, just like
.NET does. The runtime provides these facilities.
** Porting
If you are interested in porting the Mono runtime to other
platforms, you might find the pre-compiled <a
href="archive/mono-tests.tar.gz">Mono regression test
suite</a> useful to debug your implementation.
* COM and XPCOM
We plan on adding support for XPCOM on Unix and COM on Microsoft
Windows later in our development process.
+229
View File
@@ -0,0 +1,229 @@
* Screenshots
** Mono Debugger
Some shots of the <a href="jit-debug.html">Mono Debugger</a>
<table border=1>
<tr>
<td>
<a href="images/Screenshot-Debugger-1.png"><img src="images/Screenshot-Debugger-1-thumb.png"></a>
</td>
</tr>
<tr>
Debugger showing the source code view.
</tr>
</table>
<table>
<tr>
<td>
<a href="images/Screenshot-Debugger-2.png"><img src="images/Screenshot-Debugger-2-thumb.png"></a>
</td>
</tr>
<tr>
Debugger showing the CPU view.
</tr>
</table>
** Mono Documentation Browser
The Mono Documentation Browser is available from <a
href="anoncvs.html">CVS</a>, module `monodoc'.
<table border=1>
<tr>
<td>
<a href="images/Screenshot-B2.png"><img src="images/Screenshot-B2-thumb.png"></a>
</td>
</tr>
<tr>
Mono Documentation Browser rendering a method description.
</tr>
</table>
<table>
<tr>
<td>
<a href="images/Screenshot-MethodSummary.png"><img src="images/Screenshot-MethodSummary-thumb.png"></a>
</td>
</tr>
<tr>
Mono Documentation Browser rendering the class method summary
</tr>
</table>
** Eclipse running with Mono
Zoltan Varga made the Java VM for .NET <a
href="http://www.ikvm.net">IKVM</a> run <a
href="http://www.eclipse.org">Eclipse</a>, the IBM Open Source IDE.
<a href="images/ikvm-screenshot.png"><img src="images/ikvm-screenshot-thumb.png"></a>
** Mono Basic
The Mono Basic compiler ships with the Mono distribution.
<table border=1>
<tr>
<td>
<a href="images/gtk-vb.png"><img src="images/gtk-vb-thumb.png"></a>
</td>
</tr>
<tr>
Mono Basic running a sample Gtk# application.
</tr>
</table>
** Platano Media Player
Alp's <a href="http://www.atoker.com/platano/">Platano</a>
Media Player is written with Gtk# (with GStreamer support):
<table border=1>
<tr>
<td>
<img src="images/platano_s.png"></a>
</td>
</tr>
<tr>
Platano startup.
</tr>
</table>
<table>
<tr>
<td>
<img src="images/platano-playing_s.png">
</td>
</tr>
<tr>
Platano playing the <a
href="http://developer.ximian.com/projects/third_party/codemonkey/index.html">Code
Monkey At Work</a> video.
</tr>
</table>
** GSIRC
Alp's <a href="http://www.atoker.com/gsirc/">GSIRC</a>
Gtk-Sharp IRC written with Gtk#
<table border=1>
<tr>
<td>
<a href="http://go-mono.com/images/gsirc-0.2a_overview.jpg"><img src="images/gsirc-0.2a_overview-thumb.jpg"></a>
</td>
</tr>
<tr>
GSIRC is shown with the preferences dialog and chatting on some channels (rooms).
</tr>
</table>
** SQL# For GTK#
Daniel Morgan's SQL query tool that runs on Mono on Linux and Windows. It is
written in C# and allows you to connect to various Mono ADO.NET providers and
enter SQL commands.
<table border=1>
<tr>
<td>
<img src="http://go-mono.com/images/sqlsharp.png">
</td>
</tr>
<tr>
SQL# For GTK# is shown retrieving data from a Microsoft SQL Server 2000 database.
</tr>
</table>
** Type Reflector
Type Reflector is a tool included in Mono to inspect your assemblies.
<table border=1>
<tr>
<td>
<img src="images/type-reflector.png">
</td>
</tr>
</table>
** Object Browser
Radek Doulik's Object Browser (in Mono CVS) is a useful tool
to inspect existing assemblies and their source code:
<table border=1>
<tr>
<td>
<img src="images/Screenshot-ObjectBrowserDemo.png">
</td>
</tr>
</table>
** Windows.Forms
Windows.Forms running with Wine on Linux:
<table border=1>
<tr>
<td>
<a href="http://go-mono.com/images/monomdi.jpg"><img src="http://go-mono.com/images/monomdi-thumb.jpg"></a>
</td>
</tr>
</table>
<table border=1>
<tr>
<td>
<a href="http://go-mono.com/images/WINESWF.JPG"><img src="http://go-mono.com/images/WINESWF-thumb.JPG"></a>
</td>
</tr>
</table>
** Mono running on the iPaq
<table border=1>
<tr>
<td>
<img src="images/familiar-mint-hello.png">
</td>
</tr>
</table>
** Mono Certificate Viewer
<table border=1>
<tr>
<td>
<img src="images/swf-certview.png">
</td>
</tr>
<tr>
<td>
running on Windows using SWF
</td>
</tr>
<tr>
<td>
<img src="images/gtk-certview.png">
</td>
</tr>
<tr>
<td>
running on Linux (RH9) using GTK#
</td>
</tr>
</table>
** SkyNET
SkyNET is written in C# and uses GTK# for displaying a star chart.
<table border=1>
<tr>
<td>
<img src="http://go-mono.com/images/skynet.png">
</td>
</tr>
</table>
Executable
+214
View File
@@ -0,0 +1,214 @@
* Microsoft SQL Server Provider
<ul>
<li>ADO.NET Provider for Microsoft SQL Server 7/2000 databases</li>
<li>Exists in namespace System.Data.SqlClient and assembly System.Data</li>
<li>Created by Tim Coleman</li>
<li>Used the <a href="http://www.freetds.org/">FreeTDS</a> and
<a href="http://jtds.sourceforge.net/">jTDS</a> projects as resources.</li>
<li>Implemented in 100% C#</li>
<li>Is similar to the Mono.Data.TdsClient and Mono.Data.SybaseClient providers.</li>
<li>Requires the assembly Mono.Data.Tds.dll which implements the TDS protocol in 100% C#.</li>
<li>Uses TDS Protocol Version 7.0</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Able to connect to Microsoft SQL Server 7/2000 databases</li>
<li>Connection pooling works.</li>
<li>Stored Procedures work</li>
<li>Parameters work.</li>
<li>Prepare works.</li>
<li>SQL commands can be executed
via ExecuteNonQuery() of a SqlCommand.</li>
<li>SQL aggregates can be executed and a single row and single column
result can be retrieved via ExecuteScalar() of a SqlCommand</li>
<li>SQL queries can be executed via ExecuteReader() and results
can be retrieved via SqlDataReader.</li>
<li>a DataTable with schema info about a result can be gotten via GetSchemaTable()
in a SqlDataReader</li>
<li>XML can be read via ExecuteXmlReader in a SqlCommand.</li>
<li>Data can be filled in a DataTable in a DataSet via a SqlDataAdapter</li>
<li>Uses TDS Protocol Version 7.0</li>
<li><a href="http://www.go-mono.com/tds-providers.html">Design of the Microsoft SQL Server, Sybase, and TDS Providers in Mono</a></li>
<li>Works in the SQL# command-line and GTK# GUI version</li>
</ul>
** Action plan
<ul>
<li>Connection timeouts is being developed now</li>
<li>Needs more testing</li>
<li>Would like to figure out how to connect via Trusted_Connection or Integrated Security</li>
<li>Start work on TDS Protocol Version 8.0 support</li>
</ul>
** Testing
<ul>
<li>Have a working mono and mcs installed</li>
<li>Have access to a Microsoft SQL Server database
or either download it:
<ul>
<li><a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a></li>
</ul>
</li>
<li>If using Microsoft SQL Server 2000, make sure
you are using at least Service Pack 3 for Microsoft SQL Server 2000. If using
MSDE 2000, make sure you have the special Service Pack 3 for MSDE 2000.</li>
<li>For those that only have MSDE installed. You can change the authentication mode
from Windows Only Authentication to SQL Server and Windows Authentications (also knows as Mixed-mode authentication)
via the <a href="http://support.microsoft.com/default.aspx?scid=kb;en-us;Q322336&sd=tech#4">registry</a></li>. It is
the LoginMode you need to change. By default,
MSDE is installed with Windows Only Authentication. For SqlClient to work with MSDE, you will
need to change the setting.</a>
<li>If using MSDE, you might need to create a new user with password. Give
this user access to various databases in this MSDE instance. Also, for each
database, give this new user at least SELECT access to the various tables you want
to retrieve data from.</li>
<li>If you have Enterprise Manager, you can easily change the authentication mode
for both MSDE and Microsoft SQL Server. To change the authentication mode in
Enterprise Mananger, select the instance, right-click on it, and select properites.
The SQL Server properties dialog for that instance will pop up. Choose the Security
tab. Change the authentication from Windows Only to SQL Server and Windows. If
the instance of your database does not show up in Enterprise Manager, Register first
by selecting the Action menu and choosing New SQL Server Registration.</li>
<li>Located at mcs/class/System.Data/Test is a test for System.Data.SqlClient
named SqlTest.cs and you could use this as a basis for your test.</li>
<li>Mono's SqlClient does not support trusted connections
nor integrated security. You can not use this when connecting. You need
to explicitly use a User ID and Password
authenticated by SQL Server.</li>
<li>Has a connection string format:
<pre>
Server=hostname;Database=databaseName;User ID=userid;Password=password
</pre>
</li>
<li>The Server part can be used three ways:
<table border=1>
<tr>
<td><b>Server Definition</b></td> <td><b>Example</b></td>
</tr>
<tr>
<td>hostname</td> <td>Server=MYHOST</td>
</tr>
<tr>
<td>hostname,port</td> <td>Server=MYHOST,1433</td>
</tr>
<tr>
<td>hostname\\instance</td> <td>Server=MYHOST\\NETSDK</td>
</tr>
</table>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using System.Data.SqlClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=pubs;" +
"User ID=myuserid;" +
"Password=mypassword;";
IDbConnection dbcon;
dbcon = new SqlConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"SELECT fname, lname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["fname"];
string LastName = reader["lname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs -r System.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+143
View File
@@ -0,0 +1,143 @@
* SQL Lite Data Provider
<ul>
<li>ADO.NET Data Provider for
the <a href"http://www.hwaci.com/sw/sqlite/">SQL Lite</a> which
is an embeddable SQL database engine</li>
<li>From the SQL Lite web page: SQLite is a C library that
implements an embeddable SQL database engine. Programs that link with
the SQLite library can have SQL database access without
running a separate RDBMS process. The distribution
comes with a standalone command-line access program (sqlite) that
can be used to administer an SQLite database and which serves
as an example of how to use the SQLite library. SQLite is not a client library
used to connect to a big database server. SQLite is the server. The SQLite
library reads and writes directly to and from the database files on disk.</li>
<li>SQL Lite can be downloaded
from <a href"http://www.hwaci.com/sw/sqlite/download.html">here</a>.
binaries exist for Linux and Windows. sqlite.dll on Windows
and sqlite.so on Linux. The source code is available too.</li>
<li>Exists in namespace and assembly Mono.Data.SqliteClient</li>
<li>Created by Vladimir Vukicevic so he could have a database of
thumbnail images for mPhoto. mPhoto is GUI application
for cataloging images. mPhoto runs on Mono
and uses <a href="http:www.go-mono.com/gtk-sharp.html">GTK#</a> for its GUI.</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Able to connect, execute commands, and retrieve data...</li>
<li>Works in mPhoto by providing access to a SQL Lite database to store images.</li>
</ul>
** Action Plan
<ul>
<li>Create a DataAdapter for SQL Lite named SqliteDataAdapter that can be used to
Fill a DataTable in a DataSet</li>
<li>Get the method GetSchemaTable() in class SqliteDataReader to return a DataTable
that works</li>
</ul>
** Testing
<ul>
<li>Have a working mcs and mono</li>
<li>Make sure Mono.Data.SqliteClient.dll was built and is installed
in the same place as the mono class libraries.</li>
<li>If you do not have <a href"http://www.hwaci.com/sw/sqlite/download.html">SQL Lite</a>,
download it. There are binaries for Windows and Linux.</li>
<li>There is a test named SqliteTest.cs found at mcs/class/Mono.Data.SqliteTest/Test</li>
<li>Has a connection string format of "URI=file:some/path". For example,
the connection string "URI=file:SqliteTest.db" will use the database file
named SqliteTest.db, if it does not exist, the file will be created.</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.SqliteClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString = "URI=file:SqliteTest.db";
IDbConnection dbcon;
dbcon = new MySQLConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader[0];
string LastName = reader[1];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.SqliteClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll \
-r Mono.Data.SqliteClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+40
View File
@@ -0,0 +1,40 @@
* Project Status
Pieces of Mono that have been implemented:
<ul>
* C# compiler: The C# compiler is mostly complete, a
few features are still missing (for a list, check the
<a href="c-sharp.html">C# compiler</a> web page.
* The Mono JIT engine (<b>mono</b>. The JIT engine is
the real
virtual machine that we support. It is
currently functional, and we are improving its speed,
and making it feature complete.
* A CIL bytecode interpreter (<b>mint</b>). This
currently can be used to run most .NET programs
(modulo the fact that our class libraries are not
complete enough).
<b>mint</b> can currently run the Mono C# compiler and
the compiler generates valid code.
We use <b>mint</b> as a reference implementation of
the runtime environment and to quickly support
non-Intel platforms.
* Metadata library: Can currently parse
and load information from .NET modules (executables
and DLL files).
* Disassembler: Can disassemble .NET modules. Still
lacking exception handling as well as useful debugging
tools (hex dumping, token dumping).
* Class Libraries: You can check the current status in the
<a href="class-status.html">Class Status page</a>.
</ul>
Executable
+155
View File
@@ -0,0 +1,155 @@
* Sybase Data Provider
<ul>
<li>ADO.NET Provider for Sybase SQL Server databases</li>
<li>Exists in namespace Mono.Data.SybaseClient and assembly Mono.Data.SybaseClient</li>
<li>Created by Tim Coleman</li>
<li>Used the <a href="http://www.freetds.org/">FreeTDS</a> and
<a href="http://jtds.sourceforge.net/">jTDS</a> projects as resources.</li>
<li>Implemented in 100% C#</li>
<li>Is similar to the Mono.Data.TdsClient and System.Data.SqlClient providers.</li>
<li>Requires the assembly Mono.Data.Tds.dll which implements the TDS protocol in 100% C#.</li>
<li>Uses TDS Protocol Version 5.0</li>
<li>Does not support trusted connections</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Able to connect to Sybase databases</li>
<li>SQL commands can be executed
via ExecuteNonQuery() of a SybaseCommand.</li>
<li>SQL aggregates can be executed and a single row and single column
result can be retrieved via ExecuteScalar() of a SybaseCommand</li>
<li>SQL queries can be executed via ExecuteReader() and results
can be retrieved via SybaseDataReader.</li>
<li>a DataTable with schema info about a result can be gotten via GetSchemaTable()
in a SybaseDataReader</li>
<li>Data can be filled in a DataTable in a DataSet via a SybaseDataAdapter</li>
</ul>
** Action plan
<ul>
<li>Connection timeouts is being developed now.
<li>Needs more testing...
</ul>
** Testing
<ul>
<li>Have a working mono and mcs installed</li>
<li>Have access to a Sybase database
or either download it:
<ul>
<li><a href="http://www.sybase.com/downloads">Sybase</a></li>
</ul>
</li>
<li>Located at mcs/class/System.Data/Test is a test for System.Data.SqlClient
named SqlTest.cs and you could use this as a basis for your test.</li>
<li>Has a connection string format:
<pre>
Server=hostname;Database=databaseName;User ID=userid;Password=password
</pre>
</li>
<li>The Server part can be used two ways:
<ul>
<li>hostname - "Server=MYHOST"</li>
<li>hostname,port - "Server=MYHOST,1533"</li>
</ul>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.SybaseClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=pubs;" +
"User ID=myuserid;" +
"Password=mypassword;";
IDbConnection dbcon;
dbcon = new SybaseConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"SELECT fname, lname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["fname"];
string LastName = reader["lname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.SybaseClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.SybaseClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+164
View File
@@ -0,0 +1,164 @@
* Design of the Microsoft SQL Server, Sybase, and TDS Data Providers in Mono
<ul>
* After much discussion among the Mono ADO.NET developers,
we have come up with the design of implementing a Sybase, Microsoft
SQL Server, and TDS Generic ADO.NET providers. These providers have
been created and are actively developed by Tim Coleman.
* Since Sybase and Microsoft SQL Server databases both
use the TDS protocol for data access, and other implementations
of TDS (FreeTDS and jTDS) have included support for multiple
versions of the TDS, we have decided to do the same.
* The TdsClient ADO.NET provider will be Mono's first provider
written completely in C# without any dependencies except
the usual suspects: corlib.dll, System.dll, and System.Xml.dll.
</ul>
* New ADO.NET Providers
<p>There will be three ADO.NET providers that will use TDS.
<ol>
<li><p>Mono.Data.SybaseClient namepace and assembly will
hold the ADO.NET provider for Sybase SQL Server database.
This provider uses TDS version 5.0 which
can only be used with Sybase databases.
<li><p>System.Data.SqlClient namespace and System.Data assembly
will hold the ADO.NET provider
for Microsoft SQL Server 7.0/2000 databases. This provider is to be
compatible with SqlClient in Microsoft .NET and uses TDS version 7.0
which only supports Microsoft SQL Server 7.0/2000.
There is TDS version 8.0
which we will need to support as well, but it is used for
Microsoft SQL Server 2000 databases.
<li><p>Mono.Data.TdsClient namespace and assembly is a generic
provider for older TDS databases. This provider will default to
using TDS version 4.2 which can be used by older Sybase and
Microsoft SQL Server databases.
</ol>
* Building The New Providers
<p> All three providers will use common internal code
at Mono.Data.TdsClient.Internal. Any classes in
Mono.Data.TdsClient.Internal will have the internal
keyword and will be built with the assembly of that provider.
<ol>
<li><p>SqlClient will build its assembly System.Data using files
from System.Data, System.Data.SqlClient, System.Data.SqlTypes,
System.Data.Common, and Mono.Data.TdsClient.Internal.
<p>SqlClient
will only reference the usual
suspects: corlib.dll, System.dll, and System.Xml.dll. SqlClient will be
a wrapper around TdsClient.Internal, but provide specific functionality to
Microsoft SQL Server 7.0/2000 databases.
<p>SqlClient build example:
<pre>
mcs -target:library -out:System.Data.dll \
System.Data.SqlClient/*.cs \
..\Mono.Data.TdsClient\Mono.Data.TdsClient.Internal\*.cs \
[any other classes in System.Data assembly...] \
-r corlib.dll -r System.dll -r System.Xml.dll
</pre>
<li><p>SybaseClient will build its assembly Mono.Data.SybaseClient using
files from Mono.Data.SybaseClient and Mono.Data.TdsClient.Internal.
SybaseClient will reference
the usual suspects plus System.Data.dll SybaseClient will
be a wrapper around TdsClient.Internal, but provide specific
functionality to Sybase.
<p>SybaseClient build example:
<pre>
mcs -target:library -out:Mono.Data.SybaseClient.dll \
Mono.Data.SybaseClient\*.cs \
..\Mono.Data.TdsClient\Mono.Data.TdsClient.Internal\*.cs
-r corlib.dll -r System.dll -r System.Xml.dll -r System.Data.dll
</pre>
<li><p>TdsClient will build its assembly Mono.Data.TdsClient
using files from Mono.Data.TdsClient
and Mono.Data.TdsClient.Internal. TdsClient will reference the
usual suspects plus System.Data.dll TdsClient is a wrapper
provider around TdsClient.Internal used for generic
unit tests. TdsClient will a wrapper around TdsClient.Internal
as a generic TDS provider
and allow TDS configuration options not exposed in SqlClient
nor SybaseClient, such as, TdsVersion will be exposed in TdsClient
but not in SqlClient nor SybaseClient.
<p>TdsClient build example:
<pre>
mcs -target:library -out:Mono.Data.TdsClient.dll \
Mono.Data.TdsClient\*.cs \
Mono.Data.TdsClient.Internal\*.cs \
-r corlib.dll -r System.dll -r System.Xml.dll -r System.Data.dll
</pre>
</ol>
* Classes in Mono.Data.TdsClient.Internal will:
<ul>
<li>use the internal keyword to prevent exposing these classes
to the System.Data.dll assembly.
<li> implement the ADO.NET interfaces just like any other ADO.NET provider, such as,
IDbConnection, IDbCommand, IDataReader, IDataRecord, IDataAdapter, etc...
<li> be sealed just like other providers
<li> provide features to be directly used by the SqlClient and SybaseClient
providers, such
as, setting the default TDS version: SqlClient to 7.0 and SybaseClient
to 5.0 and TdsClient to 4.2.
<li> be written completely in C# or IL assembly language (if need be).
<li> implement the TDS protocol version 4.2, 5.0, 7.0, and 8.0. This
is where most of the
work will take place.
<li> be an internal ADO.NET provider to the public ADO.NET providers:
System.Data.SqlClient, Mono.Data.SybaseClient, and Mono.Data.TdsClient.
</ul>
* Implementation Details of the TDS Protocol
<ul>
* will be implemented in pure C# from scratch
* will reside in Mono.Data.TdsClient.Internal
* will use FreeTDS and jTDS as rerferences.
</ul>
* More Information
<ul>
* <a href="http://www.freetds.org/">FreeTDS</a> is C API that implements
the TDS protocol. Has libraries for tds, ctlib, and dblib. It builds
and runs on Windows, Linux, and other platforms. FreeTDS provides
data access to Microsoft SQL Server and Sybase databases.
* <a href="http://jtds.sf.net/">jTDS</a> is a 100% Java JDBC provider
for Microsoft SQL Server and Sybase databases.
* <a href="http://www.freetds.org/tds.html">TDS Protocol</a>
</ul>
* Contribute
<p>Anybody willing to help? If so,
contact any of the people working on the ADO.NET support
in Mono: Rodrigo Moya, Tim Coleman, Daniel Morgan, Brian Ritchie,
Vladimir Vukicevic, Ville Palo, Franklin Wise, and others.
Executable
+159
View File
@@ -0,0 +1,159 @@
* TDS Generic Provider
<ul>
<li>ADO.NET Provider for older Sybase and Microsoft SQL Server databases</li>
<li>Exists in namespace Mono.Data.TdsClient and assembly Mono.Data.TdsClient</li>
<li>Created by Tim Coleman</li>
<li>Used the <a href="http://www.freetds.org/">FreeTDS</a> and
<a href="http://jtds.sourceforge.net/">jTDS</a> projects as resources.</li>
<li>Implemented in 100% C#</li>
<li>Is similar to the Mono.Data.SybaseClient and System.Data.SqlClient providers.</li>
<li>Requires the assembly Mono.Data.Tds.dll which implements the TDS protocol in 100% C#.</li>
<li>Uses TDS Protocol Version 4.2 by default</li>
<li>Does not support trusted connections</li>
<li>Bugs with Mono or the data provider should be reported
in Mono's Bugzilla <a href="http://bugzilla.ximian.com/">here</a>. If you
do not have Bugzilla user account, it is free
and easy to
create one <a href="http://bugzilla.ximian.com/createaccount.cgi">here</a>.</li>
</ul>
** Current Status
<ul>
<li>Only builds on Windows currently due to mcs does not support modules and mcs
has problems with code that is internal.</li>
<li>Able to connect to Microsoft SQL Server and Sybase databases</li>
<li>SQL commands can be executed
via ExecuteNonQuery() of a TdsCommand.</li>
<li>SQL aggregates can be executed and a single row and single column
result can be retrieved via ExecuteScalar() of a TdsCommand</li>
<li>SQL queries can be executed via ExecuteReader() and results
can be retrieved via TdsDataReader.</li>
<li>a DataTable with schema info about a result can be gotten via GetSchemaTable()
in a TdsDataReader</li>
<li>Data can be filled in a DataTable in a DataSet via a TdsDataAdapter</li>
</ul>
** Action plan
<ul>
<li>Connection timeouts is being developed now.</li>
<li>TODO</li>
</ul>
** Testing
<ul>
<li>Have a working mono and mcs installed</li>
<li>Have access to a Sybase or Microsoft SQL Server database
or either download it:
<ul>
<li><a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a></li>
<li><a href="http://www.sybase.com/downloads">Sybase</a></li>
</ul>
</li>
<li>If using Microsoft SQL Server 2000, make sure
you are using at least Service Pack 3 for Microsoft SQL Server 2000</li>
<li>Located at mcs/class/System.Data/Test is a test for System.Data.SqlClient
named SqlTest.cs and you could use this as a basis for your test.</li>
<li>Has a connection string format:
<pre>
Server=hostname;Database=databaseName;User ID=userid;Password=password
</pre>
</li>
<li>The Server part can be used two ways:
<ul>
<li>hostname - "Server=MYHOST"</li>
<li>hostname,port - "Server=MYHOST,1533"</li>
</ul>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.TdsClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=pubs;" +
"User ID=myuserid;" +
"Password=mypassword;";
IDbConnection dbcon;
dbcon = new TdsConnection(connectionString);
dbcon.Open();
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"SELECT fname, lname " +
"FROM employee";
dbcmd.CommandText = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["fname"];
string LastName = reader["lname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.TdsClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.TdsClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+147
View File
@@ -0,0 +1,147 @@
* Testing
Testing is an important part of the Mono project: every one of its
three major components has a test suite tailored for its needs. This
is very helpful, because in the course of developing the software it
is very common to introduce bugs in existing code. A test suite
helps us fix the bugs as soon as they are introduced.
** Class Library Tests
All classes in Mono libraries should have comprehensive unit test
suites to go with them. Unit testing is a software engineering
methodology that makes it easier to build correct code. Every
method in every class should have a set of tests to verify
that they work correctly. Mono also needs a testing framework
to make it easy to write and run lots of tests.
** Getting started
If you are new to writing NUnit tests, there is a template you may use
to help get started. The file is:
<b>mcs/class/doc/TemplateTest.cs</b>
Save a copy of this file in the appropriate test subdirecty
(see below), and replace all the {text} markers with
appropriate code. Comments in the template are there to guide
you. You should also look at existing tests to see how other
people have written them.
mcs/class/corlib/Test/System.Collections/CollectionBaseTest.cs
is a small one that might help.
The directory that will contain your new file depends on the
assembly/namespace of the class for which you are creating the
tests. Under mcs/class there is a directory for each
assembly. In each assembly there is a Test directory,
e.g. mcs/class/corlib/Test. In the Test directory there are
sub-directories for each namespace in the assembly,
e.g. mcs/class/corlib/Test/Sytem. Put your new test file in
the appropriate sub-directory under Test for the class you are
testing.
Once all of that is done, you can do a 'make test' from the top mcs
directory. Your test class will be automagically included in the
build and the tests will be run along with all the others.
* Tips on writing Unit tests.
You should look at the <a href="http://nunit.org">NUnit documentation</a>,
as it is a fantastic product, and includes fantastic documentation,
but here are some tips for those of you who are already reading
this web page.
** Provide an unique error message for Assert()
Include an unique message for each Assert() so that when the assert
fails, it is trivial to locate it in the source. Otherwise, it may be
difficult to determine which part of the test is failing. A good way
to ensure unique messages is to use something like #A01, #A02 etc.
Ok:
<pre>
AssertEquals("array match", compare[0], i1[0]);
AssertEquals("array match", compare[1], i1[1]);
AssertEquals("array match", compare[2], i1[2]);
AssertEquals("array match", compare[3], i1[3]);
</pre>
Excellent:
<pre>
AssertEquals("#A01", compare[0], i1[0]);
AssertEquals("#A02", compare[1], i1[1]);
AssertEquals("#A03", compare[2], i1[2]);
AssertEquals("#A04", compare[3], i1[3]);
</pre>
Once you used such a number in an Assert(), don't change it later on -
people might use it it identify the test in bug reports or in mailing
lists.
** Use AssertEquals() to compare things, not Assert().
Do not compare two values with Assert() - if the test fails,
people have no idea what went wrong while AssertEquals()
reports the failed value.
Ok:
<pre>
Assert ("A01", myTicks[0] == t1.Ticks);
</pre>
Excellent:
<pre>
AssertEquals ("A01", myTicks[0], t1.Ticks);
</pre>
** Test your test with the Microsoft runtime
If possible, try to run your testsuite with the Microsoft runtime on
.NET on Windows and make sure all tests in it pass. This is especially
important if you're writing a totally new testcase - without this
check you can never be sure that your testcase contains no bugs ....
Don't worry if you're writing your test on Linux, other people can
test it for you on Windows.
Sometimes you may discover that a test doesn't show the expected
result when run with the Microsoft runtime - either because there is a
bug in their runtime or something is misleading or wrong in their
documentation. In this case, please put a detailed description of the
problem to mcs/class/doc/API-notes and do also report it to the
<a href="mailing-lists">mailing list</a> - we'll forward this to the
Microsoft people from time to time to help them fix their documentation
and runtime.
** Unit tests.
Why do unit testing? It becomes simple to run automated tests
for the whole library. Unit tests are a safety net - you can
change part of the code and verify that you haven't broken
anything. Ideally, tests are written before the actual library
code itself. And every time a bug is discovered, a test should
be written to demonstrate the bug and its fix. Then, if
you ever reintroduce the bug, you will know immediately. For
more info, read <a
href="http://junit.sourceforge.net/doc/testinfected/testing.htm">
JUnit Test Infected: Programmers Love Writing Tests</a>.
** Getting Started
We welcome all contributions to the Class Libary Test Suite.
There is information to help you get started in CVS at
mcs/class/doc/NUnitGuidelines. Once you have written your test, please
post it to <a href="mailing-lists.html">mono-list</a>.
Someone will make sure to add the file or apply the patch as
appropriate. If you plan to be an on-going contributor and
would like to get cvs account, email <a href="mailto:[email protected]">miguel</a>.
Normally, after you send a couple of well-written new files
and/or patches to the list, you will be given cvs access.
+6
View File
@@ -0,0 +1,6 @@
* Thanks
We would like to thank Tim O'Reilly, Brian Jepson and Nathan
Torkington for their help.
Dave Winer for provided interesting comments and a to read.
+1
View File
@@ -0,0 +1 @@
Discuss with write new JIT
+67
View File
@@ -0,0 +1,67 @@
* Tools
We need a number of tools to make people productive using a
Mono-based solution. Some of these tools can be developed on
Windows before Mono is fully finished.
All of these tools should be written using C#.
For the tools that are typically command line tools: Try to
write these as components that could load their input from
streams or collections of streams, and implement the command
line tools as wrappers around those classes.
For example, we will be making the C# compiler a component
that could be reused by applications that might have a use for
the various bits of the compiler (either to embed the
compiler, or reuse the code generator part of it).
This is important so that these components (compiler,
assembler, linker, etc) can be integrated later into the
visual development environment (hopefully with the help of the
SharpDevelop hackers).
TODO=ilasm,IL Assembler
** IL Assembler.
This assembler should basically take as input a file
containing IL bytecodes as specified in the `Partition II' of
the ECMA spec, and produce a binary file.
TODO=al,Assembly Linker
** Assembly Linker.
This tool is used to construct assemblies, which are basically
deployment units for CLI executables.
TODO=debugger,Debugger
** Debugger
We will need a debugging API to debug CLI applications and
then a debugger component that can be used in an IDE
environment.
TODO=ide,Integrated Development Environment
** Integrated Development Environment
There is already a project to create a C# development
environment: <a
href="http://www.icsharpcode.net/OpenSource/SD/default.asp">SharpDevelop</a>.
People should work with the SharpDevelop hackers to produce a
unified development environment.
Please work with the SharpDevelop hackers to build a good IDE.
We will work on creating an embedable compiler component and
an embeddable debugger component that can be used withing
SharpDevelop
TODO=hbrowser,Help Browser
** Help Browser
We need a good help browser that can be used to browse
documentation. Ideally this help browser can accept as input
XML Docbook input and an assorted set of file formats
(Microsoft Help, Unix manual pages, Unix Info pages)
Look at the GNOME DevHelp for a good set of ideas on how to
implement this.
+2
View File
@@ -0,0 +1,2 @@
*.src
*.html
+70
View File
@@ -0,0 +1,70 @@
0,Home,index.html,index.src
1,FAQ,faq.html,faq.src
1,News archive,http://monoevo.sf.net/mwn/archives.html
1,Screenshots,screenshots.html,screenshots.src
1,Team,team.html,team.src
1,Other sites,other.html,other.src
1,Old News,oldnews.html,oldnews.src
0,Mono,rationale.html,rationale.src
1,Runtime,runtime.html,runtime.src
2,Embedding,embedded-api.html,embedded-api.src
1,Classes,class-library.html,class-library.src
1,Gtk#,gtk-sharp.html,gtk-sharp.src
1,ASP.NET,asp-net.html,asp-net.src
1,ADO.NET,ado-net.html,ado-net.src
1,C# Compiler,c-sharp.html,c-sharp.src
1,VB Compiler,mbas.html,mbas.src
0,Download,download.html,download.src
1,CVS access,ccvs.html,ccvs.src
1,AnonCVS access,anoncvs.html,anoncvs.src
0,Contributing,contributing.html,contributing.src
1,Hackers,hackers.html,hackers.src
1,Documentation,documentation.html,documentation.src
1,Class Docs,classlib-doc.html,classlib-doc.src
1,Test Suite,testing.html,testing.src
1,Mono TODO,mono-todo.html,mono-todo.src
1,Tools,tools.html,tools.src
1,Porting,porting.html,porting.src
2,PowerPC,ppc.html,ppc.src
1,HOWTO,mono-contribution-howto.html,mono-contribution-howto.src
0,Resources,resources.html,resources.src
1,Beginning,mono-beginning.html,mono-beginning.src
1,Mailing Lists,mailing-lists.html,mailing-lists.src
1,Ideas,ideas.html,ideas.src
1,Passport,passport.html,passport.src
1,Books,books.html,books.src
1,Papers,papers.html,papers.src
1,Languages,languages.html,languages.src
1,Debugging,jit-debug.html,jit-debug.src
0,Plans,plans.html,plans.src
1,ADO.NET,ado-net.html,ado-net.src
2,ProviderFactory,provider-factory.html,provider-factory.src
2,Firebird Interbase,firebird.html,firebird.src
2,IBM DB2,ibmdb2.html,ibmdb2.src
2,Microsft SQL Server,sqlclient.html,sqlclient.src
2,MySQL,mysql.html,mysql.src
2,ODBC,odbc.html,odbc.src
2,OLE DB,oledb.html,oledb.src
2,Oracle,oracle.html,oracle.src
2,PostgreSQL,postgresql.html,postgresql.src
2,SQL Lite,sqlite.html,sqlite.src
2,Sybase,sybase.html,sybase.src
2,TDS Generic,tdsclient.html,tdsclient.src
1,Crypto,crypto.html,crypto.src
1,Java,java.html,java.src
1,Windows.Forms,winforms.html,winforms.src
0,Class Status,class-status.html,class-status.src,cm/cormissing.css,cm/cormissing.js
1,corlib,class-status-corlib.html,class-status-corlib.src,cm/cormissing.css,cm/cormissing.js
1,System,class-status-System.html,class-status-System.src,cm/cormissing.css,cm/cormissing.js
1,Xml,class-status-System.Xml.html,class-status-System.Xml.src,cm/cormissing.css,cm/cormissing.js
1,Data,class-status-System.Data.html,class-status-System.Data.src,cm/cormissing.css,cm/cormissing.js
1,Drawing,class-status-System.Drawing.html,class-status-System.Drawing.src,cm/cormissing.css,cm/cormissing.js
1,Web,class-status-System.Web.html,class-status-System.Web.src,cm/cormissing.css,cm/cormissing.js
1,Web.Services,class-status-System.Web.Services.html,class-status-System.Web.Services.src,cm/cormissing.css,cm/cormissing.js
1,Microsoft.VisualBasic,class-status-Microsoft.VisualBasic.html,class-status-Microsoft.VisualBasic.src,cm/cormissing.css,cm/cormissing.js
1,Windows.Forms,class-status-System.Windows.Forms.html,class-status-System.Windows.Forms.src,cm/cormissing.css,cm/cormissing.js
1,EnterpriseServices,class-status-System.EnterpriseServices.html,class-status-System.EnterpriseServices.src,cm/cormissing.css,cm/cormissing.js
1,Formatters.Soap,class-status-System.Runtime.Serialization.Formatters.Soap.html,class-status-System.Runtime.Serialization.Formatters.Soap.src,cm/cormissing.css,cm/cormissing.js
1,Cscompmgd,class-status-Cscompmgd.html,class-status-Cscompmgd.src,cm/cormissing.css,cm/cormissing.js
1,System.Security,class-status-System.Security.html,class-status-System.Security.src,cm/cormissing.css,cm/cormissing.js
0,Contact,contact.html,contact.src
+1
View File
@@ -0,0 +1 @@
*.html
Binary file not shown.

After

Width:  |  Height:  |  Size: 150 B

+182
View File
@@ -0,0 +1,182 @@
.y IMG
{
border: 0px;
padding: 0px;
margin: 0px;
margin-right: 4px;
vertical-align: middle;
}
.y, .y_,
.n, .n_,
.c, .c_,
.c, .c_,
.d, .d_,
.en, .en_,
.i, .i_,
.s, .s_,
.e, .e_,
.f, .f_,
.m, .m_,
.o, .o_,
.p, .p_,
.r, .r_,
.x, .x_
{
FONT: 10px 'Verdana';
margin-left: 20px;
}
.y_ .n,
.y_ .n_,
.n_ .c,
.n_ .c_,
.n_ .s,
.n_ .s_,
.n_ .d,
.n_ .d_,
.n_ .en,
.n_ .en_,
.n_ .i,
.n_ .i_,
.c_ .c,
.c_ .c_,
.c_ .e,
.c_ .e_,
.c_ .f,
.c_ .f_,
.c_ .m,
.c_ .m_,
.c_ .o,
.c_ .o_,
.c_ .p,
.c_ .p_,
.c_ .r,
.c_ .r_,
.c_ .x,
.c_ .x_,
.c_ .i,
.c_ .i_,
.d_ .c,
.d_ .c_,
.d_ .e,
.d_ .e_,
.d_ .f,
.d_ .f_,
.d_ .m,
.d_ .m_,
.d_ .o,
.d_ .o_,
.d_ .p,
.d_ .p_,
.d_ .r,
.d_ .r_,
.d_ .x,
.d_ .x_,
.en_ .c,
.en_ .c_,
.en_ .e,
.en_ .e_,
.en_ .f,
.en_ .f_,
.en_ .m,
.en_ .m_,
.en_ .o,
.en_ .o_,
.en_ .p,
.en_ .p_,
.en_ .r,
.en_ .r_,
.en_ .x,
.en_ .x_,
.i_ .c,
.i_ .c_,
.i_ .e,
.i_ .e_,
.i_ .f,
.i_ .f_,
.i_ .m,
.i_ .m_,
.i_ .o,
.i_ .o_,
.i_ .p,
.i_ .p_,
.i_ .r,
.i_ .r_,
.i_ .x,
.i_ .x_,
.i_ .i,
.i_ .i_,
.s_ .c,
.s_ .c_,
.s_ .e,
.s_ .e_,
.s_ .f,
.s_ .f_,
.s_ .m,
.s_ .m_,
.s_ .o,
.s_ .o_,
.s_ .p,
.s_ .p_,
.s_ .r,
.s_ .r_,
.s_ .x,
.s_ .x_,
.s_ .i,
.s_ .i_,
.e_ .r,
.e_ .r_,
.e_ .o,
.e_ .o_,
.f_ .r,
.f_ .r_,
.f_ .o,
.f_ .o_,
.m_ .r,
.m_ .r_,
.m_ .o,
.m_ .o_,
.o_ .r,
.o_ .r_,
.o_ .o,
.o_ .o_,
.p_ .r,
.p_ .r_,
.p_ .o,
.p_ .o_,
.r_ .r,
.r_ .r_,
.r_ .o,
.r_ .o_,
.x_ .r,
.x_ .r_,
.x_ .o,
.x_ .o_
{
display: none;
}
.t
{
cursor: pointer;
margin-right: 8px;
}
.filter
{
cursor: pointer;
vertical-align: middle;
}
.st
{
margin-left: 20px;
}
.l
{
cursor: pointer;
}
+392
View File
@@ -0,0 +1,392 @@
function toggle (elt)
{
if (elt == null)
return;
var eltLink = elt.firstChild;
if (eltLink != null && eltLink.className == 't') // toggle
{
var ich = elt.className.indexOf ('_');
if (ich < 0)
{
eltLink.src = 'cm/tp.gif';
elt.className += '_';
}
else
{
eltLink.src = 'cm/tm.gif';
elt.className = elt.className.slice (0, ich);
}
}
}
function setView (elt, fView)
{
var eltLink = elt.firstChild;
if (eltLink != null && eltLink.className == 't') // toggle
{
var ich = elt.className.indexOf ('_');
if (ich < 0 && !fView)
{
eltLink.src = 'cm/tp.gif';
elt.className += '_';
}
else if (ich >= 0 && fView)
{
eltLink.src = 'cm/tm.gif';
elt.className = elt.className.slice (0, ich);
}
}
}
function trimSrc (strSrc)
{
return strSrc.slice (strSrc.lastIndexOf ('/') + 1, strSrc.lastIndexOf ('.'));
}
function getChildrenByTagName (elt, strTag)
{
strTag = strTag.toLowerCase ();
var rgChildren = new Array ();
var eltChild = elt.firstChild;
while (eltChild)
{
if (eltChild.tagName && eltChild.tagName.toLowerCase () == strTag)
rgChildren.push (eltChild);
eltChild = eltChild.nextSibling;
}
return rgChildren;
}
function viewAll (elt, dictTypes)
{
var fView = false;
var rgImages = getChildrenByTagName (elt, 'IMG');
var cImages = rgImages.length;
for (var iImage = 0; iImage < cImages; iImage++)
{
var strImage = trimSrc (rgImages [iImage].src);
if (dictTypes [strImage])
{
fView = true;
break;
}
}
var rgElts = getChildrenByTagName (elt, 'DIV');
var cElts = rgElts.length;
if (cElts != 0)
{
var iElt;
for (iElt = 0; iElt < cElts; iElt ++)
fView |= viewAll (rgElts [iElt], dictTypes);
}
elt.style.display = fView ? '' : 'none';
return fView;
}
function getView (elt)
{
var eltLink = elt.firstChild;
if (eltLink != null && eltLink.className == 't') // toggle
{
var ich = elt.className.indexOf ('_');
if (ich < 0)
return true;
}
return false;
}
function getParentDiv (elt)
{
if (elt)
{
do
{
elt = elt.parentNode;
}
while (elt && elt.tagName != 'DIV');
}
return elt;
}
function getName (elt)
{
var rgSpans = getChildrenByTagName (elt, 'SPAN');
for (var iSpan = 0; iSpan < rgSpans.length; iSpan ++)
{
var span = rgSpans [iSpan];
if (span.className == 'l') // label
{
if (span.innerText)
return span.innerText;
else
return span.firstChild.nodeValue;
}
}
return null;
}
function clickHandler (evt)
{
var elt;
if (document.layers)
elt = evt.taget;
else if (window.event && window.event.srcElement)
{
elt = window.event.srcElement;
evt = window.event;
}
else if (evt && evt.stopPropagation)
elt = evt.target;
if (!elt.className && elt.parentNode)
elt = elt.parentNode;
if (elt.className == 'l') // label
{
var strClass;
var strField;
var strNamespace;
var strAssembly;
elt = getParentDiv (elt);
var strEltClass = elt.className;
if (strEltClass.charAt (strEltClass.length - 1) == '_')
strEltClass = strEltClass.slice (0, strEltClass.length - 1);
if (strEltClass == 'x') // constructor
{
strField = 'ctor';
elt = getParentDiv (elt);
}
else
if (strEltClass == 'm' || // method
strEltClass == 'p' || // property
strEltClass == 'e' || // event
strEltClass == 'f') // field
{
strField = getName (elt).toLowerCase ();
var match = strField.match ( /[\.A-Z0-9_]*/i );
if (match)
strField = match [0];
elt = getParentDiv (elt);
}
var strEltClass = elt.className;
if (strEltClass.charAt (strEltClass.length - 1) == '_')
strEltClass = strEltClass.slice (0, strEltClass.length - 1);
if (strEltClass == 'c' || // class
strEltClass == 's' || // struct
strEltClass == 'i' || // struct
strEltClass == 'd' || // delegate
strEltClass == 'en') // enum
{
strClass = getName (elt);
if (strEltClass == 'en')
strField = null;
elt = getParentDiv (elt);
}
var strEltClass = elt.className;
if (strEltClass.charAt (strEltClass.length - 1) == '_')
strEltClass = strEltClass.slice (0, strEltClass.length - 1);
if (strEltClass == 'n')
{
strNamespace = getName (elt);
elt = getParentDiv (elt);
}
var strEltClass = elt.className;
if (strEltClass.charAt (strEltClass.length - 1) == '_')
strEltClass = strEltClass.slice (0, strEltClass.length - 1);
if (strEltClass == 'y')
{
strAssembly = getName (elt);
}
if (evt.ctrlKey)
{
var strRoot = 'http://cvs.hispalinux.es/cgi-bin/cvsweb/mcs/class/';
var strExtra = '?cvsroot=mono';
if (strAssembly)
{
strRoot = strRoot + strAssembly + '/';
if (strNamespace)
{
strRoot = strRoot + strNamespace + '/';
if (strClass)
{
strRoot += strClass + '.cs';
strExtra += '&rev=1';
}
}
window.open (strRoot + strExtra, 'CVS');
}
}
else if (strNamespace)
{
var re = /\./g ;
strNamespace = strNamespace.toLowerCase ().replace (re, '');
if (strClass)
strNamespace += strClass.toLowerCase () + 'class';
if (strField)
strNamespace += strField;
if (strClass || strField)
strNamespace += 'topic';
window.open ('http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrf' + strNamespace + '.asp', 'MSDN');
}
}
else
{
if (elt.parentNode && elt.parentNode.className == 't') // toggle
elt = elt.parentNode;
else if (elt.className != 't') // toggle
return;
while (elt != null && elt.tagName != 'DIV')
elt = elt.parentNode;
if (evt.shiftKey)
{
var rgElts = getChildrenByTagName (elt, 'DIV');
var cElts = rgElts.length;
if (cElts != 0)
{
var fView = false;
var iElt;
for (iElt = 0; iElt < cElts; iElt ++)
{
if (getView (rgElts [iElt]))
{
fView = true;
break;
}
}
for (iElt = 0; iElt < cElts; iElt ++)
{
setView (rgElts [iElt], !fView);
}
}
}
else if (evt.ctrlKey)
{
setView (elt, true);
var eltParent = getParentDiv (elt);
while (eltParent)
{
var rgSiblings = getChildrenByTagName (eltParent, 'DIV');
var cSiblings = rgSiblings.length;
for (var iSibling = 0; iSibling < cSiblings; iSibling++)
{
var eltSibling = rgSiblings [iSibling];
if (eltSibling != elt)
{
setView (eltSibling, false);
}
}
elt = eltParent;
eltParent = getParentDiv (elt);
}
}
else
toggle (elt);
}
return false;
}
function filterTree ()
{
var eltMissing = document.getElementById ('missing');
var eltTodo = document.getElementById ('todo');
var eltExtra = document.getElementById ('extra');
var eltErrors = document.getElementById ('errors');
var dictTypes = new Object ();
if (eltMissing.checked)
dictTypes ['sm'] = true;
if (eltTodo.checked)
dictTypes ['st'] = true;
if (eltErrors.checked)
dictTypes ['se'] = true;
if (eltExtra.checked)
dictTypes ['sx'] = true;
// dictTypes ['sc'] = true;
viewAll (document.getElementById ('ROOT'), dictTypes);
}
function selectMissing ()
{
toggleFilter ('missing');
}
function selectTodo ()
{
toggleFilter ('todo');
}
function selectExtra ()
{
toggleFilter ('extra');
}
function selectErrors ()
{
toggleFilter ('errors');
}
function toggleFilter (strFilter)
{
var eltTodo = document.getElementById ('todo');
var eltMissing = document.getElementById ('missing');
var eltExtra = document.getElementById ('extra');
var eltErrors = document.getElementById ('errors');
var eltToggle = document.getElementById (strFilter);
if (window && window.event && window.event.shiftKey)
{
eltMissing.checked = eltTodo.checked = eltExtra.checked = eltErrors.checked = false;
eltToggle.checked = true;
}
else
if (!eltTodo.checked && !eltMissing.checked && !eltExtra.checked && !eltErrors.checked)
{
eltMissing.checked = eltTodo.checked = eltExtra.checked = eltErrors.checked = true;
eltToggle.checked = false;
}
filterTree ();
}
function onLoad ()
{
var eltMissing = document.getElementById ('missing');
var eltTodo = document.getElementById ('todo');
var eltExtra = document.getElementById ('extra');
var eltErrors = document.getElementById ('errors');
eltMissing.checked = eltTodo.checked = eltExtra.checked = eltErrors.checked = true;
}
if (document.layers)
{
document.captureEvents (Event.MOUSEUP);
document.onmouseup = clickHandler;
}
else if (document.attachEvent)
{
document.attachEvent('onclick', clickHandler);
}
else if (document.addEventListener)
{
document.addEventListener('click', clickHandler, false);
}
else
document.onclick = clickHandler;
Binary file not shown.

After

Width:  |  Height:  |  Size: 137 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 861 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 90 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 90 B

Loaded 100 of 5461 files, more files were not shown because too many files have changed in this diff. Show more