This involves a few steps.
First define MonoAssemblyName in RuntimeStructs.cs
Then add some helped to decode blob arrays and handle hex digits.
Finally, move the actual implementation from native to managed.
And call it consistently in thread start functions when the managed
thread start function returns with an exception.
(If coop is not enabled, the exception handler unwinds the thread and
when there's no handler invokes the unhandled exception hook via
jit_tls->abort_func, so this is just for the coop case.)
Fixes mono/tests/unhandled-exception-1.cs for coop and bitcode.
Allows safe allocation of native utf8 char* strings from managed
strings.
using (var h = new SafeStringMarshal (str)) {
/* use h.Value IntPtr */
} // g_free'd by h.Dispose ()
This is necessary on weird devices where the hwcap code might fail to detect
the ARM version it's running on (usually caused by differences in /proc/cpuinfo
output).
Some Android devices for some reason have a 'model name' line instead of a
'Processor' line. On such devices, we would fail to detect the architecture
version at all, and end up thinking that it's ARMv4 (even if the runtime
was compiled for ARMv7).
When we shutdown we set suspend_finalizers flag in metadata so we no longer run any finalizers. After recent changes, we avoid traversing gc hashes for finalizer enqueuing when this flag is set. The counterpart, popping the queues empty (even without running the finalizers) can still take some time, especially since we lock for each entry. Exit early from this loop if we no longer need to run finalizers.
Achieve this by setting a new flag inside sgen, instead of passing the address of suspend_finalizers all the time to the sgen api.
By asserting on error, we ensure that we return from these functions only when successfull, or when it makes sense to return an error (for example, timedwait return -1 only on timeout or interrupt).
By asserting on error, we ensure that we return from these functions only when successfull, or when it makes sense to return an error (for example, timedwait return -1 only on timeout).
The following scenario might happen:
- thread A: returns from tpdomain D1, then parks
- thread B: returns from tpdomain D1, D1 is unloading so it's removed with `domain_remove`
- thread A: unparks, calls `domain_get_next` with tpdomain D1
- domain_get_next asserts as it can't find tpdomain D1 in the list of domains
To fix that, we simply set the previous_tpdomain to NULL when unparking.
This was from when we did a nursery collection as part of the
finishing collection pause. Now that we don't do that anymore, we
underaccount major collection times.
The store/store fence incurs quite a high cost, so we only want it to
run when absolutely necessary. The most efficient way is to
separately compile nursery object operations for when the concurrent
collector is running, so there has to be no dynamic check.
In the future we might want to try batching updates of references to
moved objects so we have to do only one fence per batch.
The missing remset check uses the binary protocol to log missing
remsets it found. Debugging is easier if we don't have to manually
flush the binary protocol.
If a thread is interrupted after a reference write but before the corresponding
write barrier, the remset will be missing, but the object will be pinned.
After the latest code changes, we may land here with `errors == SslPolicyErrors.None`,
so we need to make sure that we actually set it to `RemoteCertificateChainErrors` if
the system validator returns an error.
(cherry picked from commit b4304354b1)
Alternative implementation to 8f092147bb.
In CI we explicitly pass EMIT_NUNIT=1 and check-seq-points to generate the nunit xml and run the tests,
locally those are omitted. This avoids needing to sniff for Jenkins/Wrench variables.
Same for a9eec21d62, but we already pass V=1 in Jenkins.
When doing the first phase of sweeping we tag the block pointer within the block list with a CAS, after which we own the block and we are free to update the state and do sweep computations on the block. When we finish this phase we directly write the untagged block pointer back in the list, making the block available to inspect by other threads. We need a write barrier before writting the untagged pointer back because, when another thread might acquire the block, it might encounter an invalid block state.
I noticed this while looking at why Mono.CSharp is registered as "crashed" in the the new
fullaot PR job on Jenkins. It turns out all tests were excluded in mobile_static which means
no NUnit xml was produced and that is exactly what the script then interprets as a crash.
I saw that ASTVisitorTest.cs was not included in the net_4_x tests as well, likely inadvertently.
It got bitrotten over the years so I had to fix it up a bit, now it compiles/runs on mobile_static as well.
Since acceptance-tests/Makefile (and llvm/Makefile) include scripts/submodules/versions.mk which evals versions.py which looks
for a SUBMODULES.json file in the current working directory we got confusing error messages if the build directory is not the src dir:
```
Traceback (most recent call last):
File "../../mono/scripts/submodules/versions.py", line 22, in <module>
submodules = json.load(open(CONFIG_FILE))
IOError: [Errno 2] No such file or directory: 'SUBMODULES.json'
```
Instead we now pass the path to SUBMODULES.json as a variable to versions.py and set it based on $(top_srcdir) so it works
even for out-of-tree builds.
In order for our exception handling to work on linux, we need the
unwind-dw2-fde-dip implementation in libgcc to work with our
.o file. This requires that `--eh-frame-hdr` be passed by the linker.
By using clang++ as the linker, we will get this and other flags
necessary for correct interop with c++ libraries.
Fixes issues where ResponseStream.Close would throw an exception when
peer had already closed the connection and ResponseStream.Close would
still try to communicating to peer that it was closing.
The issue was brought to our attention by failures on:
- MonoTests.System.Net.WebRequestTest.TestReceiveCancelation
- MonoTests.System.Net.HttpWebRequestTest.TestLargeDataReading
A common pattern that we use across the test suite is to create objects on a new thread, join the thread, collect then expect certain objects to be dead/finalized since we assumed that thread to be no longer a source of pinning. This is not always the case since, after joining, the thread might still be alive and running unmanaged code related to the thread shutdown, which can reuse the stack that previously contained the managed references.
The workaround is to still allocate objects far down the stack, even if we are on a separate thread.
At the moment the helper can be used in tests which run under the TestDriver (since it's included in TestDriver.dll) and can also be included as a helper source for test bcl classes that need it.
This reverts commit cf94a6fcd4.
It seems this causes something that prevents the chroot from unmounting in the Linux builds on Jenkins,
resulting in an endless "can't unmount" loop and stuck builds. Reverting to see if this fixes it.
For objects that die at the same time, normal finalizers should be run before critical finalizers. When we were unloading a domain we were running finalizers for all objects in that domain without checking whether the finalizer is critical or not. Now we enqueue the objects first in the finalization queues so we can run all the normal finalizers before the critical ones.
Fix for the following failing pinvoke tests in runtime tests suite on win x64:
* pinvoke11.exe
* winx64structs.exe
* pinvoke_ppcs.exe
* pinvoke_ppcc.exe
- Microsoft.WebApplication.targets was inadvertently removed.
- The new Microsoft.NuGet.Build.Tasks assembly sources were not getting dist'ed. Adding to DIST_ONLY_SUBDIRS fixes this for now,
though we can maybe add it to SUBDIRS instead (but neither me nor Marek know for what exactly that's used)
ILASM.exe has features which a mobile_static runtime will not support.
It is invoked with an external mono when used in the runtime.
We skip it here because otherwise it will fail to verify.
Wrapper stack frames don't have MVID or IL associated.
ex: (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
This fixes an inconsistency where xbuild would add System.Core
references to all builds, and MSBuild would only add them for
.NETFramework.
This change could break user XA/XI/XM projects on Mac if the user has
manually removed the explicit System.Core reference from the project,
however such projects would already be broken on Windows.
This is required for interoperating with project.json-based NuGet package configuration files
(not to be confused with DNX or AspNet Core which use it as a project file too) from MSBuild/xbuild.
The task hooks into the build process, resolves assembly references from the nuget package cache
and injects them into the compilation project so the csproj doesn't need to be modified when
adding new references/packages.
It is the first step on our road to PCL5/NuGet3.
Also add Mono.RuntimePropertyHandle struct representing a native MonoProperty pointer.
Also add ves_icall_System_Reflection_PropertyInfo_internal_from_handle_type icall
that wraps mono_property_get_object_checked.
Add new Mono.RuntimeEventHandle struct wrapping a pointer to a native MonoEvent
Add new icall
ves_icall_System_Reflection_EventInfo_internal_from_handle_type that's
mostly a wrapper around mono_event_get_object_checked.
This happens because current implementation is doing a direct call to Win32
GetLastError in order to get the value before it get clobbered by the icall
setting the last error value in mono. When running AOT all constructs that tries
to call a method using a direct address will be dropped since that will not work
in full AOT. This results in incomplete compiled libraries causing runtime exceptions
in full AOT.
The fix on Windows x64 is to introduce a new OP code, GET_LAST_ERROR that will
retrieve the last error without clobbering it in the process. This is done by
emitting code reading the value directly from the TEB (thread environment block)
and will be lowered to just a move from the segment register holding the TEB data
structure on Windows x64. This is how GetLastError is doing this as well, but since
we won’t be able to call the method in a “safe” way in full AOT, using the segment
register directly will solve the issue. We use the segment register for accessing TLS,
so we already relying on the TEB structure.
NOTE, this will only be applied to Windows x64, full AOT for now.
be detected at runtime. Since the process crash, lot of valuable information was never
written out to the console (like the managed stack trace) needed to effectively resolve
the issue.
Current implementation used different value type ABI’s depending on if call
was a managed->native, native->managed or managed->managed call. The implementation
was also overcomplicated since it was a tweaked copy from System V x64 value type
ABI with scenarios and conditions that wouldn’t apply to the Windows x64 value
type ABI. Having a uniform value type ABI when possible regardless of managed->native,
native->managed or managed->managed calls simplifies scenarios and reduce complexity.
While all the above are legitimate reasons the primary driving factor behind
the rewrite was a different issue. There are .NET wrapper libraries around DirectX API
used by game engines and other libraries that uses a pattern using a call into a stub
managed method that gets patched directly in the MSIL to a calli that will end up in a
native DirectX vtable method. In current ABI we can’t detect scenario like this, so arguments
are passed as if the call was a managed->managed call causing issues for value types. Since DirectX
uses value types a lot (vectors, matrixes etc.), this was a blocker getting these technologies
running on Windows using DirectX at all. Another approach could be to change the behavior of the
library, but this would require a major redesign of the library and since several of these libraries
are mature, that wasn’t a realistic option, especially since MS .NET runtime handles the libraries as is
without modifications.
The rewrite makes sure Windows x64 value type ABI follow the platform value type ABI in all scenarios.
Also:
1. MethodBase.GetMethodFromHandleInternalType_native icall
2. reimplemented the other MethodBase GetMethodFromHandleXXX methods
in terms of this new icall.
3. MonoError-ize mono_class_get_methods_by_name
The mutex on pending_bridge_callbacks was overkill because the init
model for the mono runtime already enforces the callbacks being set on
the init thread. Added a couple comments to formalize this.
If we have an invalid SP in the suspended thread, we don't set stack_start in the thread info, expecting it to be 0 in order to signal a resume and suspend retry to the suspender thread. If the thread was already restarted before (from a different reason like IP in critical section), it would have a nonzero stack_start from the previous suspend, leading to an assertion in the previously described case.
This is also what we do on mach.
On Windows, xbuild can fail with the somewhat obscure error message: "error : Error building target GetReferenceAssemblyPaths: UNC paths should be of the form \\server\share." This occurs because a call to Path.GetFullPath(@"\") returns the string "\" on Windows, when it should return a root path that includes the drive letter, like "C:\".
The code in xbuild tries to scan directories for files. Specifically, it looks for "\.*dll". If any .dll files exist in the root directory, each will be returned with the path "/\foo.dll". This path is used to create a FileInfo, and the exception about a UNC path occurs.
So if the path is "\" or "/" Path.GetFullPath should return the correct root path, including the drive letter, on Windows.
Here is the full call stack from xbuild:
Error building target GetReferenceAssemblyPaths: System.ArgumentException: UNC paths should be of the form \\server\share.
at System.IO.Path.InsecureGetFullPath (System.String path) <0x25343f0 + 0x003fb> in <filename unknown>:0
at System.IO.Path.GetFullPath (System.String path) <0x2534378 + 0x00013> in <filename unknown>:0
at System.IO.FileInfo..ctor (System.String fileName) <0x25fae20 + 0x00033> in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.IO.FileInfo:.ctor (string)
at System.IO.DirectoryInfo.GetFiles (System.String searchPattern) <0x25fa7c0 + 0x00087> in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.IO.DirectoryInfo:GetFiles (string)
input, Int32 ptr, System.IO.DirectoryInfo directory, Boolean recursive) <0x25fa2b0 + 0x0016b> in <filename unknown>:0
input, Int32 ptr, System.IO.DirectoryInfo directory) <0x25fa270 + 0x0002f> in <filename unknown>:0
at Microsoft.Build.BuildEngine.DirectoryScanner.ProcessInclude (ITaskItem include_item, System.Collections.Generic.Dictionary`2 excludedItems, System.Collections.Generic.List`1 includedItems) <0x25d72d0 + 0x002ab> in <filename unknown>:0
at Microsoft.Build.BuildEngine.DirectoryScanner.Scan () <0x25d70e0 + 0x000ff> in <filename unknown>:0
at Microsoft.Build.BuildEngine.BuildItem.Evaluate (Microsoft.Build.BuildEngine.Project project, Boolean evaluatedTo) <0x25d5a50 + 0x005d3> in <filename unknown>:0
at Microsoft.Build.BuildEngine.BuildTaskItem.Execute () <0x25e5ad8 + 0x0002b> in <filename unknown>:0
at Microsoft.Build.BuildEngine.TaskBatchingImpl.Execute (IBuildTask buildTask, TaskExecutionMode taskExecutionMode) <0x25e3698 + 0x0004a> in <filename unknown>:0
at Microsoft.Build. BuildEngine.TaskBatchingImpl.Run (IBuildTask buildTask, TaskExecutionMode taskExecutionMode, System.Boolean& executeOnErrors) <0x25e50e0 + 0x0004f> in <filename unknown>:0
at Microsoft.Build.BuildEngine.TaskBatchingImpl.Build (IBuildTask buildTask, TaskExecutionMode taskExecutionMode, System.Boolean& executeOnErrors) <0x25e21b0 + 0x00097> in <filename unknown>:0
at Microsoft.Build.BuildEngine.TargetBatchingImpl.RunTargetWithBucket (System.Collections.Generic.Dictionary`2 bucket, Microsoft.Build.BuildEngine.Target target, System.Boolean& executeOnErrors) <0x25e14b8 + 0x00213> in <filename unknown>:0
at Microsoft.Build.BuildEngine.TargetBatchingImpl.Run (Microsoft.Build.BuildEngine.Target target, System.Boolean& executeOnErrors) <0x25e1360 + 0x000f7> in <filename unknown>:0
at Microsoft.Build.BuildEngine.TargetBatchingImpl.Build (Microsoft.Build.BuildEngine.Target target, System.Boolean& executeOnErrors) <0x25dfee0 + 0x00053> in <filename unknown>:0
at Microsoft.Build.BuildEngine.Target.DoBuild (System.Boolean& executeOnErrors) <0x25dfcf0 + 0x0004f> in <filename unknown>:0
Enable compact seq points by default so that the stack trace have IL
offsets instead os native ones.
This changes will allow any stacktrace generated from now on to be
symbolicated using mono-symbolicate.
Deprecates options gen-compact-seq-points.
This is cleanup to the previous emergency fix for bug 42469. The goal of that fix was to defer bridge processor initialization until after sgen init, but it introduced a requirement mono_gc_register_bridge_callback be called before sgen init. This breaks Xamarin Designer, which sets up callbacks late.
This patch introduces an sgen_init_bridge () which is called both at startup and after callbacks are set, and performs the initialization once all pieces are in place. Additional concurrency and style issues are also addressed.
* [corlib] Rewrite RuntimeType.GetGenericParameterConstraints
using managed code for managed object manipulation by surfacing the
native MonoGenericParamInfo struct to managed code as Mono.RuntimeStructs.GenericParamInfo
* [corlib] RuntimeType::GetGenericParameterAttributes can be managed code now.
* [corlib] Fix x86 breakage
RuntimeTypeHandle.GetGenericParameterInfo returns a pointer
Not a struct that's the same size as a pointer. On the x86 Linux
calling convention they behave differently.
mono_gc_register_bridge_callbacks is a function which the android implementation calls before initializing the runtime. One of the things this function previously did was initialize the default bridge processor if none has been initialized yet. However, because the function gets called before initializing the runtime, a bridge processor was never initialized. This lead to two bad effects:
- If a bridge processor was ever manually specified, the bridge processor would get initialized twice
- Tarjan crashes if initialized before sgen, so when Tarjan became the default bridge processor Android always crashed on launch
The default bridge processor is now initialized at the end of sgen_gc_init.
MVID and AOTID stacktrace metadata no longer displays guids with '-'.
Metadata is now also using lowercase instead of uppercase.
Changed mono-symbolicate and mono --aot to use the minimalistic GUIDs.
Replaced static constructor with delayed initialization.
Fixed possible undeterministic order of dumped MVIDs.
Used AppendFormat when possible.
Added comment to StackTrace.AddMetadataHandler explaining that it can be
used with reflection by outside code, to avoid removing it or changing
its signature.
Added StringComparer.Ordinal to dictionary.
Extracted Symbolicate.Process stacktrace dump logic into DumpStackTrace
method. Which can also be used to dump the last stack trace after the
process loop.
mono-symbolicate can now be called:
symbolicate store-symbols <msym dir> [<dir>]+
This will store in <msym dir> all the managed symbols found in the
provided directories.
mono-symbolicate now parses stack traces with metadata at their end.
All the stack trace and metada are read, so that symbolicate can use
MVID and AOTID to retrieve the symbols from the msym directory..
The MVID metadata handler displays multiple MVID(s) followed by the
comma separated list of StackFrame lines whose method belongs to the
module with the displayed MVID.
Added a reflectable static method that can be used to customize data
displayed after a stack trace.
Added metadata handler that display the AOTID of the executing assembly.
AOTID is a GUID generated by the AOT compiler and stored along with the
native code.
The AOTID uniquely identifies the generated native assembly.
The AOTID is required when we want to map native offsets to IL offsets
and the sequence points mapping those values need to be determined.
Previously handles were pointer-sized structs. Unfortunately not all
calling conventions treat pointer-sized structs as pointers, so if we
wanted to interact with handles from wrappers, we would have to do
something complicated.
With the new design, `TYPED_HANDLE_DECL(MonoFoo)` will expand to:
```c
typedef struct {
MonoFoo *__obj;
} MonoFooHandlePayload;
typedef MonoFooHandlePayload *MonoFooHandle;
```
- A single dll can be mapped to different targets based on function name.
- The dllentry target can be omitted if it is the same as the source.
This change is released under the MIT license.
Exceptions.exe regression test started to fail on win x64 release builds.
Turns out that the Visual Studio C compiler picked a different optimization
for release builds (due to a change of library type that uses a different default optimization level)
using RSI register in native code calling into JIT:ed code. If the JIT:ed code used reflection
and exceptions, that triggers InternalInvoke and lmf_filter, the code only
stored System V x64 non-volatile registers in the unwind information. On Windows,
RSI is also a non-volatile register (RDI as well) that needs to be preserved and
since the code didn’t include those in the unwind information, the correct RSI value
was not restored during the unwind. Once the control was handled back to the native
code it dereferenced RSI (that was set to 0) and crashed.
The fix is to make sure we store all non-volatile registers on x64 Windows
when we save an lmf so the unwind code can restore them when unwinding through
the lmf.
* Making sure ownerThread is not nulled unless lockCount is zero.
* Fixed so Locked property checks lockCount when determining if locked
instead of _locked field which was never set.
* Added test for setting Locked property.
* Added test capturing the original issue.
I saw this failing occasionally on iOS on Wrench:
```
[FAIL] TimerTest.AutoResetEventFalseStopsFiringElapsed : #2 wrong elapsedCount
Expected: 1
But was: 0
at MonoTests.System.Timers.TimerTest.AutoResetEventFalseStopsFiringElapsed () [0x00091] in /Users/builder/data/lanes/1411/b07703ed/source/xamarin-macios/external/mono/mcs/class/System/Test/System.Timers/TimerTest.cs:327
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00038] in /Users/builder/data/lanes/1411/b07703ed/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/corlib/System.Reflection/MonoMethod.cs:309
```
* Fix for non GCC win x86 calling convention when passing empty structs over pinvoke.
Port of https://github.com/mono/mono/pull/3085 to Winwdows x86 fixing failures
in pinvoke2 tests:
test_0_marshal_empty_struct
* Fix for incorrect implementation of small struct (single float/double) on Windows x86.
Failure in pinvoke3 test_0_marshal_small_struct_delegate9 is caused by incorrect
implemented small struct ABI on Windows x86.
Windows x86 ABI for returning structs of size 4 or 8 bytes (regardless of type)
dictates that values are passed in EDX:EAX register pairs,
https://msdn.microsoft.com/en-us/library/984x0h58.aspx.
This is different compared to for example float or double return types
(not in struct) that will be returned in ST(0),
https://msdn.microsoft.com/en-us/library/ha59cbfz.aspx.
Fix disables the alternative to do special handling of structs with 1 float or double
and make sure same logic is always applied to all small structs regardless type
as dictated by Windows x86 ABI.
* mono_test_marshal_delegate_ref_delegate uses incorrect calling convention.
mono_test_marshal_delegate_ref_delegate called by pinvoke3::test_55_marshal_delegate_ref_delegate
uses incorrect calling convention. Mono assumes delegates to be stdcall but
current definitions will be cdecl, this will cause an incorrect stack pointer
on architectures where cdecl and stdcall are different (Windows x86). Test fails
with "corrupt" stack pointer on Windows x86.
* Smaller adjustment based on feedback.
* Changed boolean struct member to bit field (on both x86 and x64)
* Changed compare code style from 0 == x to x == 0 to comply with coding standard.
libmono will use static library when building its dynamic library. This gives
the option to build binaries that could link the static version of mono runtime
or use the dynamic version of the same library. The default build binaries still
link against the dynamic version of the runtime.
The conflict happens when a type is declared like this:
.class value private auto ansi serializable sealed foo extends [mscorlib]System.Enum
The value keyword would make it a value type and ignore the parent declaration.
.net ilasm favors the later, which makes more sense.
I addressed the issue mentioned in the comments of mono_method_can_access_method:
* FIXME:
* with generics calls to explicit interface implementations can be expressed
* directly: the method is private, but we must allow it. This may be opening
* a hole or the generics code should handle this differently.
* Maybe just ensure the interface type is public.
The way to do it is to check access between gmds
Covers #41564
When multiple methods shared soap header a duplicate key exception would
be thrown.
This issue only occurs on XAMMAC and MOBILE where the non reference
source serializer is still used.
.NET supports this, from MSDN: "If an entry with the specified path and name already exists in the archive, a second entry is created with the same path and name.".
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=42219.
* [remoting] Convert mono_load_remote_field_new_checked to managed code.
* [corlib] Expose runtime struct MonoRemoteClass and MonoClass to managed
Also expose mono_class_get_type to managed code.
* [corlib] Add Mono.RuntimeClassHandle to encapsulate MonoClass*
and Mono.RuntimeRemoteClassHandle to encapsulate MonoRemoteClass*
* [runtime] mono_marshal_get_ldfld_remote_wrapper invoke the managed TransparentProxy.LoadRemoteFieldNew method directly
Don't bother going through a native call and back out to managed.
* [runtime] Get rid of MONO_WRAPPER_LDFLD_REMOTE
When the MONO_WRAPPER_LDFLD is operating on a proxy, it always invokes
the TransparentProxy::LoadRemoteFieldNew managed method
* [runtime] Remove dead mono_load_remote_field_new_icall
* [mini] Bump AOT file format version
Because we removed the LDFLD_REMOTE wrapper type so all the
MonoWrapperType enum values shifted.
[utils] Fix retiring of live block for the lock free allocator
Freeing a block descriptor (along with the block) can happen either when freeing a pointer in the block (we do this in order to prevent situations where we need to wait for the next alloc in order to free a block), either when we acquire an empty block while allocating. Either way, in order to free a block descriptor, we need to acquire it first.
When freeing a slot in a block, we are checking if the block is now empty in which case we acquire the block descriptor in order to free it (along with the block). While doing so, we were failing to account for the case where, by the time we make the block descriptor empty and the time we acquire it, another thread would try to allocate from the same descriptor, see that it's empty, free it, allocate a new descriptor (which would happen to have the same address as the retired one) to fulfill the allocation and then set it as the active descriptor for the allocator. When the first thread finally acquires the descriptor, we need to double check that it is still empty since it might be logically a different descriptor than the one we actually freed from. In the unlikely case it's not empty, we need to put it back in the allocator's data structures.
Fixes#41616
ConnectAsyncCallback now throws an exception when called a second time.
ConnectAsync reuses SocketAsyncEventArgs in BeginConnect which
already updates its state and calls ConnectAsyncCallback.
The changes make sure that ConnectAsyncCallback no longer called on
ConnectAsync catch block, while the state is still updated with the
exception.
Covers #41616
Our console runner is currently swallowing this test unhandled
exceptions.
To make it test show the failure I had to set legacyUnhandledExceptionPolicy
to 0 in mcs/class/lib/net_4_x/nunit-console.exe.config
Then running we can observe the crash by running:
make -C mcs/class/System check TESTNAME=System.Net.Sockets.SocketTest.ConnectAsyncUnhandledEx
Other tests appear to crash with legacyUEP set to 0, while the runner
shows no errors.
When we cleanup the gc at shutdown, we no longer care about running the remaining finalizers so we set the suspend_finalizers flag. This flag skipped running the finalizers but we would still traverse and modify the sgen finalizer hashes (on an arm box this could take even longer than 1s and lead to finalizer_thread_exited assertion failure since it's over the 100ms limit).
Avoid traversing sgen finalization hashes as soon as we see that we are shutting down.
libmonosgen-2.0.dll and breaks the build of monograph.exe which links against
it.
Also adds -O2 to CFLAGS on all platforms to align with how releases are built.
This should make it easier to programmatically check for errors, since it will remove the need to test the output string, which is an unreliable way of doing things.
Freeing a block descriptor (along with the block) can happen either when freeing a pointer in the block (we do this in order to prevent situations where we need to wait for the next alloc in order to free a block), either when we acquire an empty block while allocating. Either way, in order to free a block descriptor, we need to acquire it first.
When freeing a slot in a block, we are checking if the block is now empty in which case we acquire the block descriptor in order to free it (along with the block). While doing so, we were failing to account for the case where, by the time we make the block descriptor empty and the time we acquire it, another thread would try to allocate from the same descriptor, see that it's empty, free it, allocate a new descriptor (which would happen to have the same address as the retired one) to fulfill the allocation and then set it as the active descriptor for the allocator. When the first thread finally acquires the descriptor, we need to double check that it is still empty since it might be logically a different descriptor than the one we actually freed from. In the unlikely case it's not empty, we need to put it back in the allocator's data structures.
As described in https://bugzilla.xamarin.com/show_bug.cgi?id=34883 at
least Samsung SG3 doesn't allow access to the local network
interface (in fact, even ifconfig doesn't work on the device). Therefore
the test needs to be disabled on those devices. This is the first part
of the fix, the second one will be implemented in Xamarin.Android test
suite which will provide the AndroidShouldPingWork method which will
check the device id against list of those that do not work for this
test.
Part #1 of fix for https://bugzilla.xamarin.com/show_bug.cgi?id=34883
MXR is not coming back (see https://bugzilla.mozilla.org/show_bug.cgi?id=1279952 and https://github.com/SuaveIO/mono-script-buildpack/issues/9#issuecomment-226749314)
and this broke everyone who still relied on mozroots. Fix by using the version from the hg repository instead.
Starting from Mono 3.12 we've been shipping cert-sync to import CA certificates from the local computer trust store to Mono's trust store,
we strongly encourage everyone to move to that instead. Added a deprecation warning to mozroots to further strengthen this message.
Note that when fetching the CA list over the new https URL we need to skip cert validation errors, as the common use case for mozroots is when
no certs are present on the system (bootstrapping). This enables MITM but we don't really have any other options. Another reason why cert-sync is superior.
In some cases the "git log -1 <remote>" check fails even though the remote is configured
and an unnecessary fetch is done. Adding the branch to the check fixes this.
* An enhancement to the thread priority work added earlier. This will support starting a thread with a specified priority. Currently, the thread will start with the priority of the creator. The semantics of threads allow you to specify the priority of a thread before it has started. Therefore, we take note of this value at thread creation time.
* Missed committing this file the first time
* Correct typo
* Fix creation_flags reference
* MonoThreadParm really should not be in objects-internal
* Place priority in MonoInternalThread where it can be accessed by GetThreadPriority(). This enablses the priority to be set/retrieved before the thread is started. It also ensures that new threads default to a priority of THREAD_PRIORITY_NORMAL rather than inheriting the parent thread's priority.
* Revert changes to MonoInternalThread/Thread.cs. Properly use the handle for thread lookup. Initialize priority at thread creation time. Use stored value of priority if thread has not been started.
* Add code to handle retrieving the thread priority from a started thread that had been set before thread had started. This is necessary as before the thread is started the priority value can be manipulated. This value is stored in the MonoThread structure. Before the thread is started the value can be interrogated so we return this value rather than invoking the GetThreadPriority() API. When a thread is started this value is used to set the threads priority (if scheduling policy is SCHED_FIFO or SCHED_RR). For POSIX threads, after the thread is started we now keep the priority in the _Wapi_thread structure which is located via the thread handle. This structure doesn't exist until after the thread is started so we can't store the value there but after we can cache the priority value there and return it for non-SCHED_[RR|FIFO] threads. This way the expected value will always be set and returned by ThreadPriority property (currently for these threads it will simply return Normal). A test case has been added to the mono/tests directory.
* Use a copy of creation_flags so local modifications aren't propagated
* Use pthread_setschedparam as OSX doesn't support pthread_setschedprio
This fixes the bug where form authentication tickets do not expire until 50 years later.
I bumped into this bug after upgrading mono from 4.2.2 to 4.4.0
Firstly, the authentication ticket's expiry must always equal to the timeout attribute on the <forms/> element. It doesn't matter whether persistent or session cookies are used.
Secondly, if the cookie is persistent, then it's expiry should be set to the same as that of the authentication ticket.
Reference: https://blogs.msdn.microsoft.com/dansellers/2006/02/15/change-to-asp-net-2-0-forms-authentication-persistent-cookies/
This should fix some problem with Nuget archives created by Mono.
No test case for this one because it would involve writing a mini-ZIP file parser to make sure the value is written correctly (or hardcore the value offset in the generated file, which could lead to a very flakey test).
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=41775.
Updated Visual Studio build uses a different default build location of modules
compared to previous version. The tests config file includes a relative
path to libtest used for by all pinvoke tests. Since the module is now
placed at a different location the load failed during the test.
naming for intermediate pdb files for exe/dll's.
All artifacts will now have the same name of their final pdb file as
the library/dll/exe target file name.
The problem with the naming turns out to be a problem in Visual Studio
when a exe/dll use the same name of its intermediate pdb files and final
pdb file. In that case the final pdb file produced by the linker will be
incorrect and not usable by the debugger. This was the reason for the initial
change, giving intermediate pdb files a different name. Moving back to the
default naming for intermediate pdb files for exe/dll's will give the same
effect (a different name) and since libraries are not affected by this
problem, libraries can use the target name for their pdb files as well.
Also added support to not always replace config.h/version.h since that triggers
unnecessary rebuilds during development. New script will check if there is
an actual difference in the config.h/version.h file before doing the copy.
* Added regression test running mono/mini --regression [regression_tests]
* Added regression test running mono/mini --aot [regression_tests]
* Added default debugging options to run regression tests from within visual studio debugger.
* On new build system, setting up include folder if not availalble.
All changes applies to debug/release 32/64 bit.
* Added support for user macros in order to set build/install/sgen.
* Added support for more arguments to bat files + support for quoted paths.
* Added support for verbose/quite output in bat files.
* Moved libmono xcopy post build step into separate bat file.
* Cleaned some sgen configs still left in vcxprojs.
* Enabled build target suffix in order to lable a build (primarly for sgen).
* Enabled separate build tree.
* Dropped all sgen configurations, replaced by properties and target suffix.
* Fixed pdb naming of intermediate pdb files.
* Upgraded all projects to new vs2015 tool chain.
* Used mono.props through property manager instead of import.
* Fixed dependencies to be more explicitly in additional dependecies.
* Fixed error in mono.props, switched $ to % when referencing internal variables.
* Added property variables for includes and libraries, defined in mono.props.
The reason why mkbundle is not working is that for some reason
this constant expression is producing different code than the
-24 that it is supposed to.
What is odd is that the return value from the lseek system
call is the same, but yet, read fails with an end-of-file with
this value, and otherwise it passes.
With this call:
lseek (fd, -(16+sizeof(uint64_t)), SEEK_END)
strace displays:
lseek(0x3, 0xFFFFFFE8, 0x2) = 19375512 0
With this call:
lseek (fd, -24, SEEK_END)
strace displays:
lseek(0x3, 0xFFFFFFFFFFFFFFE8, 0x2) = 19375512 0
Now, while both results from lseek are the same, a subsequent read
with 24 bytes to read returns zero on the former case, and 24 on
the latter case.
When building a mobile_static build, we need to pass a lot of flags
which disable features. These make the net_4_x profile not build
correctly when using the official jenkins script. This helps.
on Windows. Updates the tests-config.in file with Windows specific <dllmap>
elements that map 'libtest' to the MSVC built libtest.dll for the current
architecture. test-runner.cs has been modified to accept a --config option to
be able to use a specific config file. Makefile.am now configures test-
runner.exe to use the tests-config config when running the tests.
Parsing ```default-allowance-ratio``` in ```MONO_GC_PARAMS``` is completely broken and accepts only one value - 1.0, while it should accept range of 1.0-10.0. We can clearly notice that when setting ```default-allowance-ratio``` to e.g. ```2.0``` and trying to run any program through Mono runtime:
```
Warning: In environment variable `MONO_GC_PARAMS': `default-allowance-ratio` must be between 1.00 - 1.00. - Using default value.
```
Therefore, correct this for using proper 1.0-10.0 range.
The do_try_exec_main function is always called in contexts where any
exception from doing the invoke is going to be stored in the exc outarg.
That means any MonoError will be handled locally by do_try_exec_main.
So we don't need a MonoError argument, we just need an inner_error.
We're seeing it randomly fail on Wrench with durations of 1550 - 1800ms.
Talked to Zoltan, this might be normal so bumping the timeout to reduce the failure rate.
The llvmonly backend will use `mono_aot_init_gshared_method_this`
and other initializers to initialize methods. These will transitively call
`mono_icall_get_wrapper_full` when icall wrappers are needed.
The init functions will set the
initialized flag after initialization. They set it in a non-atomic manner. This means that
in a multithreaded environment, it's possible to call the functions
twice.
When `mono_icall_get_wrapper_full` is called without this patch, the
pointers to wrappers it gets from `mono_marshal_get_icall_wrapper`
will not have the same addresses. They will hash to the same value
though.
This will lead to them not being found or inserted by
`find_aot_method_in_amodule`.
The fact that we already have a value with this hash means that
the new wrapper doesn't get inserted. The fact that the pointers differ
mean that we don't say that we've found our desired wrapper.
This leads to an assertion in `mono_icall_get_wrapper_full`
crashing the runtime.
Since we intend to have the semantics of a wrapper for each icall,
this change uses a cache to ensure uniqueness. The observed crashes
do not happen when this change is applied.
MONO_EXECUTABLE env variable to test-runner.exe using the --runtime command
line parameter. Defaults to 'mono' which is also the defult in test- runner.cs
if no --runtime argument is given.
* [runtime] Move 'pedump' to tools/pedump, build tools by default.
* Add missing file.
* [runtime] Mark mono_opcodes[] with MONO_API.
* [runtime] Build monograph when sgen is supported instead of boehm.
* [runtime] Link monograph against the static runtime libraries.
* [runtime] Use the same SUBDIRS/DIST_SUBDIRS for the CROSS_COMPILING case.
We're seeing the following exception on devices in CI:
```
[FAIL] HttpListenerRequestTest.HttpRequestIsLocal : System.Net.Sockets.SocketException : Could not resolve host 'XQA-AppleTV-1'
at System.Net.Dns.Error_11001 (System.String hostName) [0x00000] in /Users/builder/data/lanes/1381/d8287824/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/System/System.Net/Dns.cs:292
at System.Net.Dns.GetHostByName (System.String hostName) [0x00024] in /Users/builder/data/lanes/1381/d8287824/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/System/System.Net/Dns.cs:419
at System.Net.Dns.GetHostEntry (System.String hostNameOrAddress) [0x00061] in /Users/builder/data/lanes/1381/d8287824/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/System/System.Net/Dns.cs:380
at System.Net.Dns.GetHostAddresses (System.String hostNameOrAddress) [0x00065] in /Users/builder/data/lanes/1381/d8287824/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/System/System.Net/Dns.cs:406
at MonoTests.System.Net.HttpListenerRequestTest.HttpRequestIsLocal () [0x00006] in /Users/xamarinqa/QABot/data/lanes/2441/d8287824/source/xamarin-macios/external/mono/mcs/class/System/Test/System.Net/HttpListenerRequestTest.cs:197
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00038] in /Users/builder/data/lanes/1381/d8287824/source/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/src/mono/mcs/class/corlib/System.Reflection/MonoMethod.cs:309
```
From looking at the code, resolving the hostname to IP addresses via DNS fails so the test doesn't even run.
We don't care where the local IPs come from so we can use an alternative way of getting them - via querying the network interfaces.
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=41671
PS: fixed a hardcoded port while I was touching the code
[mini] lower typechecks later
lower typecheck instructions later in the compilation, so we've a chance to do high-level optimization after `method-to-ir`
Rewriite `MonoMethodMessage::InitMessage` in managed code
Change icall
`System.Runtime.Remoting.Messaging/MonoMethodMessage::InitMessage` to
managed code.
Also update `mono_message_init()` to invoke `InitMessage`.
Using mono_marshal_free n mono_string_builder_to_utf8
`mono_string_builder_to_utf16` is allocating using `mono_marshal_alloc` which, on windows, allocates memory using `CoTaskMemAlloc`. This buffer was then released in `mono_string_builder_to_utf8` using `g_free` which resulted in a crash since that's a different memory on windows. The fix in this PR makes sure `mono_marshal_free` is called instead which has the correct behaviour and results in a `CoTaskMemFree` on windows.
[System] Make ServicePointTest.DnsRefreshTimeout test more reliable
We are still seeing quite rare failures of this test:
```
HostEntry should result in the same IPHostEntry object.
Expected: same as <System.Net.IPHostEntry>
But was: <System.Net.IPHostEntry>
+++++++++++++++++++
STACK TRACE:
at MonoTests.System.Net.ServicePointTest.DnsRefreshTimeout () [0x00045] in /Users/builder/jenkins/workspace/test-mono-mainline/label/osx-i386/mcs/class/System/Test/System.Net/ServicePointTest.cs:228
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00038] in /Users/builder/jenkins/workspace/test-mono-mainline/label/osx-i386/mcs/class/corlib/System.Reflection/MonoMethod.cs:309
```
Since the test is only checking if expiring of the cached DNS lookup works, we don't really need to use an external domain name for this as "localhost" works just fine as well and typically doesn't trigger a DNS query which makes the test more reliable against network issues.
@monojenkins merge
We are still seeing quite rare failures of this test:
```
HostEntry should result in the same IPHostEntry object.
Expected: same as <System.Net.IPHostEntry>
But was: <System.Net.IPHostEntry>
+++++++++++++++++++
STACK TRACE:
at MonoTests.System.Net.ServicePointTest.DnsRefreshTimeout () [0x00045] in /Users/builder/jenkins/workspace/test-mono-mainline/label/osx-i386/mcs/class/System/Test/System.Net/ServicePointTest.cs:228
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00038] in /Users/builder/jenkins/workspace/test-mono-mainline/label/osx-i386/mcs/class/corlib/System.Reflection/MonoMethod.cs:309
```
Since the test is only checking if expiring of the cached DNS lookup works, we don't really need to use an external domain name for this
as "localhost" works just fine as well and typically doesn't trigger a DNS query which makes the test more reliable against network issues.
We were not exiting the critical section on this code path. This was leading to hangs at stw since the native code would take locks when compiling the code.
We were seeing intermittent failures on devices like:
```
[FAIL] TimerTest.EnabledInElapsed : #1 loss of events
Expected: True
But was: False
at MonoTests.System.Timers.TimerTest.EnabledInElapsed () <0x33b168 + 0x0014f> in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object , BindingFlags , System.Reflection.Binder , System.Object[] , System.Globalization.CultureInfo ) <0x66d400 + 0x000b7> in <filename unknown>:0
```
Since OS scheduling and GCs can influence the exact timing of the timer intervals sleeping for 200ms is likely just too short.
Instead of bumping the timeout, I decided to rewrite the test to not rely on Thread.Sleep ().
I also added another test which verifies setting AutoResetEvent=false stops the timer event from firing after the first one,
which was implicitly tested before by the other test.
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=41530
Without doing this, the check would consider a valid option name like
IpTimeToLive to be the same as ReuseAddress, as they share the same enum
value.
Fixes SocketTest.TtlChange and SocketTest.UdpMulticasTimeToLive on Android and
other platforms that don't support ReuseAddress.
* Move the versions.mk infrastructure to scripts/submodules so it can be used elsewhere too.
* Add a conditional submodule for llvm.
* Fix commit messages emitted by the bump- targets.
* Use a anonymous git url for llvm.
Before closing a socket we try to interrupt and wait for all socket
pending system calls to return. For that we set the socket as non
blocking which makes the system calls to return with EAGAIN\EWOULDBLOCK.
This issue was caught by System.Net.Sockets.SocketTest.SendAsyncFile
that was intermittently failing, we were only able to reproduce it while
running multiple test suites in parallel. We now can say that it only failed when
the the socket was closed and the sendfile was waiting for the OS to
allocate enough resources to send the file.
This was fixed by changing wapi_sendfile to return on EAGAIN.
Stack traces of blocked threads are now displayed on the exception.
The threads stacktraces are only stored when MONO_TESTS_IN_PROGRESS env
var is set to yes.
When we allocate the complex descriptor for a new type we might have the concurrent marker scan objects. While the concurrent marker scans the bitmap for a complex object, which resides in the complex_descriptor array, another thread might allocate a new complex descriptor, thus reallocate the complex_descriptor array, which would lead to corruption of the bitmap used by the concurrent marker.
We reuse the SgenArrayList which never reallocates, using instead a list of exponentially increasing arrays.
This is the initial code drop of a new handles implementation.
It differs from the previous one is a few ways:
- It keeps a separate stack of handles which is shared by all "arenas".
This eliminates malloc in the majority of the cases without the need for any tuning
- Custom gc scanning code for the handles stack.
The original implementation registered the chunks as a GC roots. Which is a terribly
slow operation as it takes the GC lock.
Instead of allocating a new handle arena for each icall, we compute a stack mark,
which is the position in the handles stack at icall entry. On exit, we simply restore that
position, which is just a couple of stores.
Since the stack is implemented using arraylets, addressed are stable in the face of
expansion.
Only the typed handles function/macros are in as having both typed and untyped handles
adds extra complexity for no clear value.
The macros only handle what was needed to port a sizeable chunk of locales.c.
This commit just sets the stage for the feature, there's quite some work left
before we can start using it, as it can be seen in the big TODO in handle.c
We were seeing an issue where attempts to create the MonoClass for an
exception in a no-exec context was causing failure. No-exec will forbid
the constructor call. Our solution was to realize that there was no
need to allocate an exception, as MonoError could already encode the
errors.
Fixes a bug in exiting modal runloop that caused not really exiting it
(not calling XplatUI.SetModal(..., false).
It caused issues with menu, for example, if you first ran a modal
dialog (a wizard), and then you started the application.
This would lead to a crash when unregistering the thread from the currnt MonoThreadInfo* destructor, as `mono_thread_info_current_unchecked` would return NULL. This would trigger an infinite loop in `mono_threads_enter_gc_safe_region_unbalanced_with_info`.
unregister_thread is the destructor for the current MonoThreadInfo* TLS key, meaning that when in this function, calling mono_thread_info_current_unchecked will always return NULL.
On Unix, errno value might change between the native call and the call to mono_marshal_set_last_error, if we exit the gc safe region. We need to ensure that it's done right after the native call.
[gc] Register a critical region when executing managed allocators.
Previously, if we stopped a thread and it had a stack looking like this:
...
profiler_signal_handler
<signal handler called>
managed_allocator
...
We would fail to identify the fact that we've just interrupted a thread that's
in a managed allocator (uninterruptible code) because we only look at the very
latest instruction pointer of the thread, which will be pointing into
profiler_signal_handler or some other function called by it. So we would
happily continue along with the STW process and proceed to doing the actual GC,
where we would see a broken heap.
We could solve this by unwinding the stack and checking all frames, but that's
complicated and error-prone. Instead, register a critical region while the
managed allocator runs. This way, if we don't identify it by instruction pointer, we
will identify it by the fact that the thread is in a critical region.
This fixes a regression introduced in 123aaa5db0.
We would sometimes see an ObjectDisposedException when calling AcceptAsync ()
because that patch removed the try-catch around it.
Xamarin.Android internal test suite takes advantage of the BCL tests
in Mono, so far their inclusion was a manual process and this commit
fixes it. A set of source inclusion and exclusion lists is added
and a handful of code fixes to make them compile on Xamarin.Android
[System] Fixes socket async exception.
SendAsyncFile uses StartSocketServer to start a server and at the same
time begins to accept a client socket. The issue is that when
the accept callback is called SendAsyncFile already closed the socket.
Fixed race condition by moving StartSocketServer and ReceiveCallback
logic into SendAsyncFile, and by using a new MRE to ensure that the
client receives all the data before the server is closed.
Fixes [#41264](https://bugzilla.xamarin.com/show_bug.cgi?id=41264)
SendAsyncFile uses StartSocketServer to start a server and at the same
time begins to accept a client socket. The issue is that when
the accept callback is called SendAsyncFile already closed the socket.
Fixed race condition by moving StartSocketServer and ReceiveCallback
logic into SendAsyncFile, and by using a new MRE to ensure that the
client receives all the data before the server is closed.
Fixes#41264
Standard C and C++ doesn't allow empty structs, empty structs will always have a
size of 1 byte. GCC have an extension to allow empty structs,
https://gcc.gnu.org/onlinedocs/gcc/Empty-Structures.html. This cause a
little dilemma since runtime build using none GCC compiler will not be
compatible with GCC build C libraries and the other way around. On platforms
where empty structs has size of 1 byte it must be represented in call and cannot
be dropped.
Libraries build using for example MSVC failed pinvoke call when empty
structs where used in pinvoke2.cs tests. The problem was that current
implementation dropped value types of size 0, eliminating them from the
call. Since MSVC implements C/C++ standard regarding empty structs (no extension used),
the function expected the parameter to be present, even if was not used.
This became a problem if the empty struct ended up in one of the 4 first
parameters (backed by registers) since if excluded, wrong parameter gets
into wrong registers (the same will apply to stack slots as well). For example,
a C signature like this, (int a, EmptyStruct es, int b) will get lowered to the
following on MSVC win x64, a -> rcx, es -> rdx and b -> r8, but since caller
eliminated es from the call, the register assignment from the caller was
a -> rcx and b -> rdx causing a violation of the calling convention and
error in callee.
The fix is to make sure that empty structs are still represented on none GCC
compilers on windows x64 (MSVC), since they must be represented in the call
to pinvoked methods. Fix will also use a const value of 0 to represent the value
passed as the struct instead of loading a value from stack into register/stack slot,
this is inline with the value the .NET runtime passes to pinvoked method. The reason
why we use a 0 instead of loading from stack is because a struct of size 0 is not explicitly
represented on stack and will have garbage data if loaded. Since it’s an empty struct value
type there is no need to load anything, just represent it as 0 in the register/stack slot passed
to caller.
There is also a case when returning an empty struct from a pinvoked method. Result will be returned
as 0 in RAX by MSVC compiled libraries (or whatever value stored in the 1 byte representation).
Since we have similar issues as above with empty structs of size 0 not explicitly represented on the
stack, the store will be eliminated and not written back to stack by caller since an empty struct doesn’t
represent any unique data.
Calling convention for managed->managed code is kept intact since it is working as expected
handling the case with empty structs as input and return values.
With fix all pinvoke2.cs tests now pass running on Windows x64 JIT.
This appears to serve no purpose as tlab_next is a thread-local variable. It's
only ever accessed by other threads in order to write to it, not read it. We
also don't do this memory barrier in the native allocation functions.
Previously, if we stopped a thread and it had a stack looking like this:
...
profiler_signal_handler
<signal handler called>
managed_allocator
...
We would fail to identify the fact that we've just interrupted a thread that's
in a managed allocator (uninterruptible code) because we only look at the very
latest instruction pointer of the thread, which will be pointing into
profiler_signal_handler or some other function called by it. So we would
happily continue along with the STW process and proceed to doing the actual GC,
where we would see a broken heap.
We could solve this by unwinding the stack and checking all frames, but that's
complicated and error-prone. Instead, register a critical region while the
managed allocator. This way, if we don't identify it by instruction pointer, we
will identify it by the fact that the thread is in a critical region.
Made breakpoint uniqueness test switch to a hash after 8th item added,
consolidated the code that handles the uniqueness test and makes the
breakpoint in one function, fixed style issues.
* Add TODO list
* Use -useSourcePath when building resources, so we do not need to add the explicit extra path
* More updates, now battling resource generation across the board
* Use newlines in the Unix commands to avoid generating things like cs-parser.cs^M
The tests added during the initial development of the -multiassembly argument failed to test the presence of extension methods;
the result was a crash that occurred when there were extension methods present in multiple assemblies.
This patch addresses the issue by putting a guard clause around the code that adds the extension method to the index.
Tests have been modified accordingly to verify this bug and include extension methods
Additionally, the -multiassembly parameter was removed entirely. This behavior is now triggered by the presence of -apistyle,
which is where support for "multiple assemblies" was meant to work anyways. To review, this is to support cross-platform
development, where you have multiple -- *different* -- assemblies for each platform. These assemblies will share a certain
cross-section of APIs that will be *exactly* the same in each assembly (as opposed to multiple versions of literally the same assembly).
As a result, every member will now contain an individual `AssemblyInfo` tag that also contains the name of the assembly.
The date/time struct in zip.h defines the month value as
uInt tm_mon; /* months since January - [0,11] */
.NET's DateTime object in turn stores months from 1-12. We didn't
take this into account when passing the values from managed->native
so the month ended up being off by one.
We didn't use this codepath before https://github.com/mono/mono/pull/3036
that's why it didn't show up until now.
The test assembly used *.dll.excludes before while the library uses *.dll.exclude.sources.
Make this consistent to reduce confusion.
Also remove corlib_cmp.dll.excludes which is from a profile that no longer exists.
We were seeing timeouts in the runtime step if two builds happen to be scheduled
at the exact same time on the ARM workers on Jenkins, causing increased load and
longer test times. They aborted the runtime step right before it'd finish.
Bump the timeout a bit to avoid this.
If we have binary protocol enabled and the debugged executable will spawn a new mono instance, both of the processes will write to the same debug file, because they share the environment variable, producing invalid results. Add a pid sufix if output file exists in order to separately obtain binary protocol outputs from all mono instances.
When we scan a block we need to have it checked for sweeping. Instead of waiting for all the blocks to be checked for sweeping, we traverse all the blocks (even though they might not have live objects), and do the sweeping check only for blocks that have dirty cards associated with them, without waiting for sweeping to end.
Allocating a major block needs addition to the allocated_blocks array, operation that needs sweep to be finished because sweep moves elements and changes the size when compacting the array. Do this operation in the sweep start instead, when we are not racing.
We had the problem that we were logging at sweep finish which can happen anytime. If we happen to suspend a thread, while doing a GC, in the middle of logging we might deadlock if we wait for sweep to finish (which can be blocked waiting for logging).
When logging multiple collections in the same stw pause, we would not log the real results for both collections since we would compute the major sizes at the very end.
We logged collections in sgen_perform_collection, outside the function calls for specific collections, which makes it cumbersome to add additional log entries.
This refactoring solves these issues by having GC code log info at any time. This log entry is enqueued in a list of pending entries. We flush the list of logs, as before, at the end of the stw, when the world is restarted.
A while ago, we switched our PR builders from using the Github-provided PR branch head (i.e. `pull/merge/XXXX`) to the exact sha1 of the latest commit on the PR (i.e. `abcdefabc`). This change was needed for the performance team, otherwise the changes they wanted to test would be rebased against a new master several times per day, breaking their ability to meaningfully track the changes in a PR.
As a side effect of this, `version.h` went from setting the version from `XXXX/abcdefabc` to `explicit/abcdefabc`, and the Jenkins PR packages use the branch name `explicit` instead of the actual PR number `XXXX`, which is pretty bad from a UX perspective.
This change checks for the `ghprbPullId` environment variable and uses it instead of the actual branch name or `explicit` - it is always set on PR builds.
Support for GSHAREDVT added for Windows x64. Changes needed
(ones gsharedvt concept was understood, crashes debugged and adjustments located)
where quite small. Primarily around shadow stack used by windows + incorrect handling
of none volatile registers on windows when going over the gsharedvt trampolines.
All GSHAREDVT tests, gshared.exe and aot.tests.exe pass in full AOT builds with above adjustments.
Support for DYNCALL added/enabled for Windows x64. Current AMD64 support was working
for basic scenarios but not enabled on Windows. Identified a problem on AMD64
when structs are passed as input parameters or returned by methods for DYNCALL scenarios
in full AOT:ed builds. This scenario doesn't seem to work for any AMD64 platform for
full AOT and the tests in aot-test.exe handling these scenarios are not run on AMD64.
Adjusted categories on test in aot-tests.exe to reflect what’s really needed by the tests
to run correctly. Also added a new category to some DYNCALL tests that uses struct support
currently not implemented on AMD64, !FULLAOT-AMD64, so at least some of the DYNCALL tests
can be run on AMD64 platforms in full AOT:ed builds.
[mini] small improvements around `MONO_IS_CALL` macro and `local-prop`
showed up in vtunes when running
```
./mono/mini/mono-sgen --stats -O=all --aot=threads=1,asmonly ~/work/benchmarker/tests/fsharp/lib/bootstrap/4.0/FSharp.Compiler.dll
```
also, I think when `OP_DYN_CALL` was introduced, it wasn't added to the `MONO_IS_CALL` macro. @vargaz, what do you think?
* Merge System/MonoType.cs into ReferenceSources/RuntimeType.cs, use the latter in the runtime code.
* [sdb] Fix a test which referenced System.MonoType.
MonoError must be explicitly reinitialized if it is used again after
mono_error_cleanup. But it is better to introduce an explicit inner
MonoError when possible.
I had a look in vtunes for
```
$ mono/mini/mono-sgen --stats -O=all --aot=threads=1,asmonly ~/work/benchmarker/tests/fsharp/lib/bootstrap/4.0/FSharp.Compiler.dll
```
and that method showed up as hot.
With this change I get an improvement from ~27.4s down to ~24.3s on my
machine.
Testing with the debugger showed multiple failures around recursive
functions:
1. Step-out breakpoints can trigger on inner frames.
Solution: Extend existing inner-frame test from step-over to step out
also.
2. "Same source line, continuing" test triggers even on wrong frame
(affects both step over and step out)
Solution: Check frame as part of this test
3. When step breakpoints pick next sequence points, they can register
multiple breakpoints at the same place if a recursive call happens to
exit there. (Possibly harmless but may have resulted in duplicate
debugger events being generated in one test.)
Solution: Check for duplicates in step-request breakpoint list before
adding new breakpoints
4. Mono.Debugging.Soft in the debugger-libs repo sometimes resumes
after breakpoints if it decides Mono.Debugger.Soft has not stepped
far enough, but the check to trigger this was not recursion-aware.
Solution: This one is not addressed in this commit, but a fix was
checked in to debugger-libs. Any code using this commit therefore
needs to be run in conjunction with debugger-libs dfbf6d8b13.
Tests were also added for issues 1-3 above.
This change makes it not need to throw exceptions.
In the runtime, use mono_thread_internal_stop instead of mono_thread_stop.
mono_thread_internal_stop only stops other threads, which is what runtime usage calls for.
mono_thread_stop will stop the current thread by raising and exception.
The first argument is whether it's a single or multiple wait. We can infer that from the number of handles.
The second argument is alertable. All waits are alertable, so I baked the constant directly.
They can only ever fail if allocation fails, which we can't recover
from, so let's just assert that we succeed.
This in turn simplifies the error handling in a lot of other thread routines.
Since referencesource is no longer a submodule under external/ after https://github.com/mono/mono/pull/2962
it didn't get included in the tarball anymore.
We need to add it again to fix the tarball build.
In https://github.com/mono/mono/commit/4164d9fbe19a1e6acb3a5ea122891020ff2868d7 the 14.0 target was updated to include
the DependsOnSystemRuntime property. However, it wasn't actually implemented in the code behind. This resulted in the
property not being set/true even if we depend on assemblies that reference System.Runtime, which in turn leads us to not
adding the Facades in ImplicitlyExpandDesignTimeFacades. This then breaks compilation because the System.Runtime lookup fails.
The fix is to actually implement the property.
This change makes it not need to throw exceptions.
In the runtime, use mono_thread_internal_stop instead of mono_thread_stop.
mono_thread_internal_stop only stops other threads, which is what runtime usage calls for.
mono_thread_stop will stop the current thread by raising and exception.
The first argument is whether it's a single or multiple wait. We can infer that from the number of handles.
The second argument is alertable. All waits are alertable, so I baked the constant directly.
When running mono/mini aot-tests.exe on full AOT:ed Windows build the following
warning message is incorrectly written to the console several times:
g_warning ("failed to get 100ns ticks");
This happens since the check triggering this warning is not taking into account
that startup time between first call to mono_ns100_ticks storing the start time
and the launch of the thread pool requesting 100ns ticks and convert it to
elapsed seconds can occur during the first second of the process lifetime.
This is more likely to happen in a full AOT:ed image since nothing needs to
be JIT:ed at startup, making it more likely to exploit the problem reaching this
code within the first second of process lifetime.
The purpose of the check is to validate that mono_ns100_ticks is returning “valid”
data, but currently it checks it after converting it to seconds, meaning that the result
of the division gets truncated to 0 during the first second. The only invalid, deterministic error
from mono_ns100_ticks that could be used to trigger this warning is either 0 or a negative time value,
but currently it just checks for 0 as an error. The fix is to make the check on the return from
mono_ns100_ticks instead of on the result of the division by 10 000 000 as it is today.
On the new Jenkins infrastructure with the new ARM64 bots we're hitting the 2h runtime test
limit right before they'd be finished. Bump the timeout a bit to fix this.
They fail on the new Jenkins ARM64 bots, disable them until we figure out the cause.
It looks like a libgdiplus issue to me which makes deploying a fixed version a bit more difficult.
Filed https://bugzilla.xamarin.com/show_bug.cgi?id=41171 to track.
Due to performance concerns, we don't account for the space wasted in blocks, since it would require dereferencing all vtables. We also don't account for allocation that might happen during sweep.
As with mono_runtime_invoke, we split up into three functions:
1. mono_runtime_invoke_array is external only. Runtime should use
one of the other two.
2. mono_runtime_invoke_array_checked threads exceptions and failures through
MonoError in coop mode. In non-coop managed exceptions unwind the
stack as before.
3. mono_runtime_try_invoke_array sends exceptions from method invocation
through a MonoException* outarg, and other errors through MonoError.
When one of the tests doesn't fail with the expected exception, we'd get just a useless message
like "TtlChangeoverflow #3" instead of the much more useful exception info + stacktrace that
NUnit catches when an unhandled exception is thrown.
During mono shutdown on windows there is, on rare occasions, an exception
in CloseHandle indicating the closure of an invalid handle. This exception
is normally a strong indication of a much more severe underlying problem,
a doubled close on a handle, that could lead to random data corruptions
and very hard to track bugs in random areas of the code. If the system reused
the handle for a different object that silently gets incorrectly closed by above
call, the above bug could manifest itself into some completely different issues,
so getting a consistent repro with the above exception with CloseHandle was a good
point to start tracking down the bug.
The exception throwed in CloseHandle boils down to the fact that threads
in thread pool's that have their finalizer run on shutdown can end up in
a scenario where the thread handle has already been closed elsewhere.
When the threads are finalized in mono_gc_finialize_threadpool_threads,
the handle on the internal thread object, stored in MonoInternalThread,
will be closed by the thread objects finializer in ves_icall_System_Threading_InternalThread_Thread_free_internal.
Under some rare occasions, one of the handles are not valid and will cause
the exception in CloseHandle or even worse, pointing to a complete different
kind of object, potentially closed by the threads finalizer, causing an instable
process with random behavior related to WIN32 objects (files, mutexes, threads, events etc).
The reason why it rarely manifests itself is due to a race between the finializer thread and the
main thread during shutdown. Main thread gives finalizer thread 2000 ms to complete its work and
if it’s time outs, the main thread won’t call the code that will run the finalizers,
mono_gc_finalize_threadpool_threads for the thread objects added to an internal list
by the finalizer thread, so if the finalizer takes more than 2000 ms to complete during shutdown
the bug won’t manifest itself. By increasing the wait time in mono_domain_finalize to for example INFINITE,
the repro of this bug will be 100% and not timing dependent anymore.
Turns out that the offending CloseHandle on the thread object happens at an
earlier point in time during shutdown, when mono_thread_manage tries to wait for
threads to complete manage thread it will do remove_and_abort_threads for background
threads still around. The way this works is that it will setup a list of thread handles
that it will wait for using WaitForMultipleObjects and then close the handles.
It turns out that the implementation of remove_and_abort_threads adds the wrong
handle to the list, not the duplicated handle but the original thread handle,
and that will trigger this bug, since the original thread handle will be closed
(and the duplicated handle will leak). The fix is to use the duplicated thread
handle instead of the original, similar to how it was already done in other similar methods, like build_wait_tids.
Sinces this bug seems to been around for quite some time and is a race related to managed threads and mono
shutdown sequence it could give other weird side effects on windows during shutdown
(since it could have closed a random WIN32 object instead of the intended thread).
Looking at Bugzilla, there is one bug that very well could be related to this specific problem, 10108:
https://bugzilla.xamarin.com/show_bug.cgi?id=10108
This bug should most likely be retested with this fix to see if it still reproducible once merged into master.
* Adds support for a handful of new command line arguments that we now use in the build.
* Always attempts to match to a project name, to get the proper project dependency.
* Update to support .exe and .dll in the generation.
* Remove warnings and some dead code
* Update the resulting csproj files based on running:
make update-csproj
make package-inputs
mono genproj.exe
bridge_processing_in_progress is set by sgen-tarjan-bridge.c at the
start and end of each bridge, although sgen-bridge sets this flag at
the same time.
There is some code that reports the length of a gc bridge operation in
sgen-stw. This is dead code dating from a period when gc bridges
occurred synchronously as part of a stop the world operation. The new
code globally tracks the end of the last stw and reports time since
then when the bridge thread completes.
This allow the removal of MONO_(PREPARE|FINISH)BLOCKING and MONO(PREPARE|FINISH)_RESET_BLOCKING, which were not explicit in their intent, leading to confusion. This also harmonize how the product and the runtime transition between thread states.
`Assertion.Fail` isn't supported by NUnitLite in monodroid, use `Assert` instead to fix the build:
```
[12:29:46] /Users/builder/data/lanes/1845/88dbce4e/source/monodroid/tests/bcl-test/BclTests.csproj (default targets) ->
[12:29:46] /Library/Frameworks/Mono.framework/Versions/4.2.1/lib/mono/4.5/Microsoft.CSharp.Targets (CoreCompile target) ->
[12:29:46]
[12:29:46] src/System/Test/System.Net/IPAddressTest.cs(282,4): error CS0103: The name `Assertion' does not exist in the current context
[12:29:46]
[12:29:46] 14 Warning(s)
[12:29:46] 1 Error(s)
```
This will be used by managed-to-native and native-to-managed wrappers, as well as trampolines, to switch between states. This is necessary as their calls might be unbalanced (a prepare blocking, without the corresponding finish blocking).
If we do not throw it from the finally clause, then in case of a Thread.Abort, we will not rethrow the catched exception, but the ThreadAbortException, and this without using the callback, leading to native stack unwinding.
The support will be broken when we will introduce MonoHandle, as we can't pass the exception naked object ref around, but need to wrap it in a MonoHandle, while still in RUNNING mode.
Fixes needed in order to get full AOT working for mono/mini regression tests on windows x64 builds (currently disabling the gsharedvt and dyncall tests).
Fixes are done in two main areas, exception and thread local storage support.
SEH exception handling enabled in order to catch CPU generated exceptions. All exception related regression tests pass with fix and runtime won't attempt to JIT any code since it is prevented when running with --full-aot startup argument.
Thread local storage (TLS) support was not complete on windows x64. When running full AOT the sgen allocator uses TLS for its allocator. AOT compiler will issues OP_TLS_GET_REG operations when compiling the “Alloc” methods. On win x64 this was not implemented, just the default OP_TLS_GET, meaning that methods compiled using OP_TLS_GET_REG was "silently" dropped when full AOT:ed compiled. At runtime, the sgen allocator would tried to locate the “Alloc” method but fails to find it and since this will cause an exception (that also needs the allocator to be used) and the program entered a loop that will end in a stack overflow crashing the program.
The fix implements OP_TLS_GET_REG and other needed support for win x64. It also fixes the offset calculation needed by full AOT builds (translating to correct runtime TLS key) for keys used by mono/mini regression tests. Since windows TLS support is a little more complex (two different conditions depending on where the TLS key gets allocated) the max size of tls_get_reg for amd64 has been increased from 32 to 64 byte as well.
OpenSSL and the MS RSA CSP (Win7 x64) generate RSA keys with a public exponent of 65537. Smaller public exponents are not allowed by some specifications and may be rejected by other software.
* Start of packager for mkbundle
* [mkbundle] Add fingerprint and directory at end of package
* [mkbundle] Update embedding file format, add support for --options, support for --runtime, chmod +x
* [driver] Add a way to parse arbitrary command line options
* [mkbundle] Align the assemblies on a page boundary, do not release directory buffer
* Work-around odd compiler error by using memcpy
* Update makefile
* Fix the windows build
* [Windows] Export the new mono_parse_options_from API
* Implement the various cross-compiler target fetching commands
* Clean
Marked it external only. Runtime should use mono_string_from_utf16_checked
Also mark mono_string_from_utf32 as external only.
(It's currently unused in the runtime, but in the future
mono_string_from_utf32_checked is available)
The actual meaning is about whether or not the name is allowed to change after
having been set by the mono_thread_set_name_internal () call; it has nothing to
do with whether the call came from managed per se.
If we did consider this, an internal runtime thread that had its name set by a
mono_thread_set_name_internal (..., FALSE /*managed*/, ...) call prior to
starting would not have its native name set nor its name reported to the
profiler.
Process.Exited event can get invoked before the process has really
exited. So, accessing process.ExitCode before the real exit can throw:
Error executing task Exec: System.InvalidOperationException: Process must exit before requested information can be determined.
at System.Diagnostics.Process.EnsureState (System.Diagnostics.Process+State state) [0x000b9] in /Users/ankit/dev/mono/mcs/class/referencesource/System/services/monitoring/system/diagnosticts/Process.cs:1439
at System.Diagnostics.Process.get_ExitCode () [0x00000] in /Users/ankit/dev/mono/mcs/class/referencesource/System/services/monitoring/system/diagnosticts/Process.cs:219
at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:get_ExitCode ()
at Microsoft.Build.Utilities.ToolTask.ExecuteTool (System.String pathToTool, System.String responseFileCommands, System.String commandLineCommands) [0x00101] in /Users/ankit/dev/mono/mcs/class/Microsoft.Build.Utilities/Microsoft.Build.Utilities/ToolTask.cs:185
at Microsoft.Build.Tasks.Exec.ExecuteTool (System.String pathToTool, System.String responseFileCommands, System.String commandLineCommands) [0x00026] in /Users/ankit/dev/mono/mcs/class/Microsoft.Build.Tasks/Microsoft.Build.Tasks/Exec.cs:83
at Microsoft.Build.Utilities.ToolTask.Execute () [0x0001c] in /Users/ankit/dev/mono/mcs/class/Microsoft.Build.Utilities/Microsoft.Build.Utilities/ToolTask.cs:128
at Microsoft.Build.BuildEngine.TaskEngine.Execute () [0x00000] in /Users/ankit/dev/mono/mcs/class/Microsoft.Build.Engine/Microsoft.Build.BuildEngine/TaskEngine.cs:134
at Microsoft.Build.BuildEngine.BuildTask.Execute () [0x0008f] in /Users/ankit/dev/mono/mcs/class/Microsoft.Build.Engine/Microsoft.Build.BuildEngine/BuildTask.cs:101
ProcessWrapper.WaitForOutput depends on the
`endEventExit`(ManualResetEvent) to be set, which is done in the event
handler for Process.Exited . So, effectively, WaitForOutput can return
before the process has really exited and ToolTask ends up throwing an
exception when it accesses the ExitCode.
Fix: Add a WaitForExit in WaitForOutput, to be sure!
Some existing tests only works when IPv4 is available, which was fine as
it match how we historically ran those tests.
Apple has a new requirement [1] to test under an "IPv6 only network" and
the change facilitate this.
[1] https://developer.apple.com/news/?id=05042016a
We were seeing compilation errors like this:
```
System.Security.Cryptography.X509Certificates/X509EnhancedKeyUsageExtension.cs(71,20): error CS0135: `oid' conflicts with a declaration in a child block
System.Security.Cryptography.X509Certificates/X509EnhancedKeyUsageExtension.cs(74,17): (Location of the symbol related to previous error)
Compilation failed: 1 error(s), 38 warnings
make[9]: *** [../../class/lib/basic/secxml/System.dll] Error 1
```
The new foreach variables introduced in 4a6e5d24e1 with the same "oid" name as the global constant apparently confused the older mcs compiler.
Rename them to avoid this.
We were seeing random failures of the test in the iOS simulator and devices.
Looking at the test, it seems to me like the 1000ms timeout is just too short. In a single iteration we're
enqueuing 500 threadpool workitems and effectively give each of them just 2ms to run and signal the CountdownEvent.
Indeed I can easily repro this in the simulator on my box if I lower the timeout to 900ms.
This may be a side effect of the new threadpool which starts threads more conservatively afaik.
Bumping the timeout should fix this.
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=39305
https://bugzilla.xamarin.com/show_bug.cgi?id=8554
Added unit tests to cover the Asynchronous API and the Task Based API.
Fixed an issue with the Task Based API that would previously throw a
`NullReferenceException` when started as the `CancellationTokenSource`
was not instantiated.
The `CancellationTokenSource` was also not disposed of after use.
It seems that older iOS6 devices don't allow access to /dev, as a DirectoryNotFoundException is
thrown when accessing /dev/zero in the FileStreamTest.OpenCharDeviceRepeatedly test there.
Ignore this exception and the test in those cases.
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=40462
AppleTLS supports a lazily-initialized X509Certificate, but not X509Certificate2 so
we need to fall-back to using Mono.Security.X509 whenever we need an X509Certificate2.
To avoid unnecessary fallbacks, the private Mono.Net.Security APIs use X509Certificate
instead of X509Certificate2.
Since 'ExtraStore' returns X509Certificate2Collection, we need to convert these to
X509Certificate2.
(cherry picked from commit 05e2372339)
The sgen tests should run on Windows x86 too (or at least they will in the near future), so we can get rid of all the special casing.
This also fixes an error in the ARM64 test run on Jenkins because test-sgen wasn't defined there.
There would previously be a race between reset blocking and a STW, that would happen as follow:
- T1 goes into blocking - T1 state is BLOCKING(0)
- T2 suspends T1 - T1 state is BLOCKING(1)
- T1 does a reset blocking -> T1 state is SELF SUSPEND REQUESTED
- T2 calls `mono_thread_info_get_suspend_state` on T1 --- SIGABRT as we cannot get suspend state when state is SELF SUSPEND REQUESTED
- T1 does polling -> T1 state is SELF SUSPENDED
The fix is for reset blocking to work like done blocking: switch to BLOCKING AND SUSPENDED.
We were seeing issues on the new Jenkins Azure boxes which had 7GB of physical memory but only about 1GB free at the time of the test, so it'd fail.
Checking the available memory should fix this.
If there's a pending exception and an AbortRequested, the pending
excpetion should be thrown.
This fixes threadpool-exceptions5.cs in coop mode.
There are two situations where this could happen.
1. Like threadpool-exception5.cs we have a threadpool worker thread
request an abort and then its async callback runs and throws an
exception. In this case apparently the async callback's exception
should be allowed to unwind and hit the unhandled exception handler.
2. A thread catches ThreadAbortException and then posts a pending
exception of some other excpetion from the catch clause. In this case
we unwind that other exception, and when it's caught we rethrow the
abort.
When the system certificate validator is invoked with an empty hostname
(caller does not want us to validate the hostname), then we need to pass
null to SecPolicyCreateSSL() and not the empty string.
(cherry picked from commit f29804d149)
Only attempt the automatic PEM->DER conversion when no password was given
and make this version of X509Helper.Import() also take care of the fallback.
(cherry picked from commit 63a214c3f0)
Previously we had separate codepaths in mono_jit_thread_attach for coop
and non-coop modes.
Now there's a common codepath for attaching the thread, and separate
code paths for performing coop state machine transitions and computing
the return value cookie.
Fixes Mono.Debugger.Soft tests under coop.
By skipping thread which have a NULL domain or lmf, we would also skip threads which are in RUNNING mode, but which are still attaching to the runtime. They could have in practice called `mono_thread_info_attach`, without having executed any managed code or set a domain yet. Because we would simply discard the suspending for these threads, we could potentially not suspend them, meaning they would keep running, even potentially run some managed code, while the GC is still running.
To fix that, we need to slightly modify the expectation of sgen STW when using unified suspend. The non-unified expectation of sgen STW would be that even if a thread has a non-initialized domain or lmf, it should still be suspended, but not scanned. The unified expectation of sgen STW would be that if a thread has a non-initialized domain or lmf, then the thread shouldn't be suspended. That second behaviour works well if we only consider that the domain or lmf could be non-initialized when the thread is detaching, but that consideration is just wrong. The main example is the beginning of `start_wrapper_internal` (in threads.c:637), where we have non-initialized domain and lmf, but where the thread is in RUNNING state, and about to access some managed memory.
On coop, an OS thread can go
STARTING->BLOCKING->RUNNING->BLOCKING->DETACHED.
For ordinary managed threads BLOCKING->DETACHED is still a bug like
before, but hopefully the checked build machinery will help us to catch
those situations.
When checked build is running with GC checking, it uses a non-zero
integer cookie instead of the thread info pointer.
This fixes pinvoke3.cs test_43_thread_attach() in checked coop builds.
This is going to be used by Xamarin.iOS to convert a managed exception to an Obj-C exception. We need this as if we don't do that, the managed exception mechanism will unwind native stack, which can lead to undefined behavior. By converting to an Obj-C exception, we let the native exception mechanism do what it's supposed to do.
Because mono_msec_ticks would previously return the number of milliseconds since boot time, it would overflow after ~49 days. That would mean that anywhere you would use it, you would need to be careful of arithmetic overflow.
By simply returning a gint64 we will not overflow before ~30k years.
Fixes bug https://bugzilla.xamarin.com/show_bug.cgi?id=38666
When FileInfo was imported in https://github.com/mono/mono/commit/bdd0de7ee52d9675dada0d19985b9daf4edab5bc the check in Delete()
got removed that raised an UnauthorizedAccessException when the FileInfo object holds a path to a directory instead of a file.
It happened to pass the MonoTests.System.IO.FileInfoTest.Delete_Directory test on OSX because unlink returns EPERM there
which got turned into the expected UnauthorizedAccessException, but on Linux it returns EISDIR so the test would fail.
Fix is to put the explicit check for directory back.
NativeMethods.GetExitCodeProcess would inherently be broken on Unix platforms for non-child processes as it can't succesfully get the exit code. This would in turn break Process.HasExited, which should not break, as it is possible to check if a non-child process is alive or dead.
It's not easy to trigger but following repro works fairly reliably
using System;
using System.Threading;
class MainClass
{
public static void Main (string [] args)
{
var r = new Random ();
for (int i = 0, total = 10000000; i < total; ++i) {
if (i % 50 == 0)
Console.WriteLine ("{0}/{1}", i, total);
var c1 = new CancellationTokenSource ();
var wh = c1.Token.WaitHandle;
GC.Collect ();
c1.CancelAfter (r.Next(5));
c1.Dispose ();
}
}
}
It crashes like
Unhandled Exception:
System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'System.Threading.ManualResetEvent'.
at System.Threading.WaitHandle.CheckDisposed () <0x1f95be0 + 0x0005c> in <filename unknown>:0
at System.Threading.EventWaitHandle.Set () <0x1f8d320 + 0x0007d> in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.Threading.EventWaitHandle:Set ()
at System.Threading.CancellationTokenSource.NotifyCancellation (Boolean throwOnFirstException) <0x1d92c70 + 0x00084> in <filename unknown>:0
at System.Threading.CancellationTokenSource.Cancel (Boolean throwOnFirstException) <0x1d92330 + 0x00030> in <filename unknown>:0
at System.Threading.CancellationTokenSource.Cancel () <0x1d92300 + 0x00025> in <filename unknown>:0
at System.Threading.CancellationTokenSource.TimerCallbackLogic (System.Object obj) <0x1d925c0 + 0x0005d> in <filename unknown>:0
This change is fixing the DateTime parser in cases of date/time strings for cultures which has the date and time separators are same. This happen with Norway, Serbia and Finland cultures
[tfs-changeset: 1513801]
The race condition would manifest in the following code:
```
for (int i = 0, total = 100000; i < total; ++i) {
if (i % 50 == 0)
Console.WriteLine ("{0}/{1}", i, total);
var c1 = new CancellationTokenSource ();
var wh = c1.Token.WaitHandle;
c1.CancelAfter (1);
Thread.Sleep (1);
c1.Dispose ();
}
```
And we would observe the following exception:
```
Unhandled Exception: System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'System.Threading.ManualResetEvent'.
at System.Threading.WaitHandle.CheckDisposed () [0x00016] in /Users/builder/data/lanes/1196/33e00ac6/source/mono/mcs/class/corlib/System.Threading/WaitHandle.cs:426
at System.Threading.EventWaitHandle.Set () [0x0000c] in /Users/builder/data/lanes/1196/33e00ac6/source/mono/mcs/class/corlib/System.Threading/EventWaitHandle.cs:205
at (wrapper remoting-invoke-with-check) System.Threading.EventWaitHandle:Set ()
at System.Threading.CancellationTokenSource.NotifyCancellation (Boolean throwOnFirstException) [0x00051] in /Users/builder/data/lanes/1196/33e00ac6/source/mono/external/referencesource/mscorlib/system/threading/CancellationTokenSource.cs:723
at System.Threading.CancellationTokenSource.Cancel (Boolean throwOnFirstException) [0x00006] in /Users/builder/data/lanes/1196/33e00ac6/source/mono/external/referencesource/mscorlib/system/threading/CancellationTokenSource.cs:409
at System.Threading.CancellationTokenSource.Cancel () <0x7d75ada8 + 0x00017> in <filename unknown>:0
at System.Threading.CancellationTokenSource.TimerCallbackLogic (System.Object obj) [0x00012] in /Users/builder/data/lanes/1196/33e00ac6/source/mono/external/referencesource/mscorlib/system/threading/CancellationTokenSource.cs:538
```
This would be a race condition between the TimerCallbackLogic call to Cancel and the call to Dispose on another thread. You could trigger it more reliably by putting a Thread.Sleep at CancellationTokenSource.cs:599.
Mono now uses ExceptionHandlingClauseOptions from methodbody.cs and ExceptionHandler from methobuilder.cs.
Remaining types from thoses files were ignored with ifdef.
Mono's implementation of RSAOAEPKeyExchangeDeformatter did the throwing
but we're now using MS implementation of it - so it make sense to move
the throw (it's needed) in the utils.cs file
MS implementation is incorrect and the .NET framework never hits this code
path as it's RSA implementation calls CryptoAPI (bypassing those managed
classes).
mscorlib/system/security/cryptography/pkcs1maskgenerationmethod.cs
-> use Mono MGF1 implementation
mscorlib/system/security/cryptography/utils.cs
-> remove duplicated code from Mono's PKCS1
-> fix RsaOaepEncrypt and RsaOaepDecrypt to call Mono code
* `ServerCertValidationCallback': Enable this for Mono.
* `ServicePointManager': Use 'MONO_FEATURE_WEB_STACK' here, we'll
eventually bring this together with the web stack.
We want the helper APIs at the top of the file, but not the actual
'ServicePointManager' class.
This is the same issue as in https://github.com/mono/referencesource/pull/7,
i.e. there's an overflow when casting a too large value from double->long
and the referencesource implementation relies on this being a large negative
value in order for the ArgumentOutOfRangeException to be properly thrown.
As Mono's runtime on ARM in this case returns -1, the exception isn't thrown.
The fix is to introduce an explicit overflow check, catch an eventual
OverflowException and raise the proper exception instead. This can be JIT'd
to better code than checking if the value fits into long every time.
It fixes a couple of DateTime unit tests that currently fail on ARM.
When setting Interval = double.MaxValue like in the TimerTest.Interval_TooHigh_ThrowOnEnabled and
TimerTest.Interval_TooHigh_Enabled_Throw Mono unit tests there was a regression on ARM in that
the ArgumentOutOfRangeException wasn't thrown as expected.
Turns out, on ARM the call to (int)Math.Ceiling(double.MaxValue) as used in UpdateTimer() and Enabled setter
doesn't produce -2147483648 (i.e. Int32.MinValue) like on x86/amd64 but rather 2147483647 (i.e. Int32.MaxValue),
which is perfectly valid as the cast overflows and the result is an undefined value.
This means that the value passed to the underlying System.Threading.Timer is not negative
and no ArgumentOutOfRangeException is thrown there.
The fix is to properly check for interval>Int32.MaxValue like is done already in the constructor.
I pulled that logic out and introduced a separate method CalculateRoundedInterval().
Note: The thrown exception changes from an ArgumentOutOfRangeException inside of System.Threading.Timer
to an ArgumentException inside of CalculateRoundedInterval().
I think this has minimal impact as no-one should rely on this exception anyway and it actually matches
what MSDN (https://msdn.microsoft.com/en-us/library/system.timers.timer.interval(v=vs.110).aspx)
says should happen in this case (even though the MS.NET 4.5 implementation doesn't comply).
Mono's implementation also did the same before: https://github.com/mono/mono/blob/4cb3f77b4bbf703b1cda59db2f5aee206e35d31a/mcs/class/System/System.Timers/Timer.cs#L95-L96
Even after we imported System.Xml referencesource, XmlSerializer is still
based on existing code. And we have some special trick for XElement
serialization support in System.Xml, by allowing access from
System.Xml.Linq.dll to use special type converter attribute.
It does not exist in referencesource and thus we lost serializability on
XElement, so we need to add the missing code to bring it back.
The former condition is to disable <msxsl:script> element.
The latter is to disable XslCompiledTransform and co (though they are
mostly removed at *.dll.sources level).
Somewhere in System.Xml requires NameTable to be canonically reused when
deserializing XmlSchema, so that certain deserialization part can check
only reference equality.
Since we have hybrid System.Xml implementation for XmlSerializer, this
is not completely achieved and with reference comparison it causes some
schema deserialization failure. To avoid this problem, just disable
reference comparison. It should not affect outside XmlSchema serialization.
DISABLE_CAS_USE is required to avoid NotImplementedExceptions in CAS land.
MONO_HYBRID_XML is to preserve Mono's XmlSerializer which also allows
interpreter-based XML serialization (as opposed to run-time code generation
based XML serialization, which is not doable in iOS).
Though some Xml.Serialization classes are useful even with mono
implementation, so we partially import them (namely schema importer).
This will let us have both the Mono and the Microsoft ThreadPool at the same time.
To switch to the Microsoft one, set the MONO_THREADPOOL environment variable to "microsoft". It will default to the Mono one.
All changes are conditional to MONO_FEATURE_NEW_TLS.
In addition to that, all changes to their code are also conditional to 'MONO'; this
mostly applies to SecureChannel, which needed several changes to replace their native
SSPI implementation with Mono's new managed version.
* Net/SecureProtocols/SslStream.cs: Make partial and comment out 'SslStream.TransportContext'.
* Net/SecureProtocols/SslState.cs: Make partial and add new internal constructor; pass the
'SSPIConfiguration' argument down to SecureChannel's .ctor.
* Net/SecureProtocols/_SslStream.cs: Make partial.
* Net/SecureProtocols/_SecureChannel.cs: Add Mono-specific SSPI APIs.
* Net/_SslSessionCache.cs: Make conditional.
- SafeRegistryHandle.ReleaseHandle is only called on code that is ignored on Mono.
- Mono is using AppDomain.FriendlyName directly instead of UnsafeNativeMethods.GetModuleFileName.
* Builds without [MethodImpl(MethodImplOptions.AggressiveInlining)]
when target framework version is lower than 4.5.
* Use Thread.Volatile instead of Volatile.Read when target framework
version is lower than 4.5.
* Change location of internal Array constants. Mono runtime cannot handle
array type with constants.
* Removes some warnings from the build for unused fields.
This patch does the following things:
* Adds support to build without Code Access Security, by using the new
define DISABLE_CAS_USE. The reason is that this is both slow, and
Mono does not actually offer a Code Access Secured environment. So
avoid paying the price.
* Removes some warnings from the build for unused variables.
* Allows the code to be bootstrapped with a 2.0 compiler (which Mono
does during the bootstrap phase currently).
Socket.AcceptAsync should use SocketAsyncEventArgs.AcceptSocket
Socket.AcceptAsync shouldn't create new socket if SocketAsyncEventArgs.AcceptSocket isn't null.
The MoveTo target is in the current working directory instead of in the temp dir, so it runs into permission issues.
Use the temp dir instead. Fixes part 2 of #40624
We don't have .NEt 4.6 installed on all of our build machines, to
running mcs.exe on Windows fails, as it was built with .NET 4.6.
Instead, we will run mcs.exe via Mono on Windows (which is what happens
on OSX, although there the low-level Process class handles it).
To accomplish this, we run mcs.bat instead of mcs.exe.
The child process would simpky execute ls, then exiting right away. Writing to its stdin would then crash with "EPIPE: An attempt is made to write to a pipe that is not open for reading by any process." as the child process exited.
Some serialization attributes are unlikely to have direct reference,
from IL, but will be needed at runtime to correctly serialize (or
deserialize) objects.
* OnDeserializedAttribute
* OnDeserializingAttribute
* OnSerializedAttribute
* OnSerializingAttribute
This, along with aad627c5e8, fixed bug
40574. The later part will have new unit tests in XI.
references:
https://bugzilla.xamarin.com/show_bug.cgi?id=40574
The problem is that private fields in described types doesn't start from _ prefix, but it should be so according to reference source.
That's way MONO can't deserialize that types correctly if source stream was created by MS .NET binary serializer.
This change is released under the MIT license.
Switching maccore to use mono-4.5.0-branch introduced this bug where
AesManaged is not available in System.Core for both tvOS and watchOS
profiles (iOS is fine).
This results in unit tests failures on bots building maccore/master.
This fix the problem by importing the "main" monotouch_System.Core.
dll.sources into the other profiles - since they all share the same
feature set (in this case) and make it less likely to forget something
else in the future.
reference:
https://bugzilla.xamarin.com/show_bug.cgi?id=40570
[sgen] Add regression test for the interaction between the bridge and handles.
The bridge code was triggering handles to be considered deallocated thus leading
them to be overwritten.
[corlib] Ifdef out calls to SynchronizationAttribute on monotouch
When WaitHandle was imported from referencesource in f6fa8f0, the code was refactored and basically all WaitHandle.Wait* calls end up in WaitOneNative or WaitMultiple now.
On monotouch those methods threw a NotSupportedException when exitContext == true even before the import, so this behavior got inherited to some other methods that didn't throw after the exception was removed from them in 93e31cb. This broke tests in maccore and other code that passed exitContext=true.
To fix this, we just ifdef out the calls to SynchronizationAttribute on monotouch since they don't make sense there anyway since remoting isn't available. The commit that initially added the exception in 2ce9fc1 only did that to make the behavior consistent when the linker is enabled. By removing the calls we get the same result.
Do the same for Monitor so we're consistent.
commit message from @akoeplinger
[verifier] Do method visibility checks for virtual final methods. Enable type visibility for all methods. Fixes#5644.
I cannot repro the issue mentioned in the comments of mono_method_can_access_method.
* FIXME:
* with generics calls to explicit interface implementations can be expressed
* directly: the method is private, but we must allow it. This may be opening
* a hole or the generics code should handle this differently.
* Maybe just ensure the interface type is public.
@monojenkins merge
This particular piece of documentation is added manually, because it's not in the regular BCL library, but is provided by Xamarin on the iOS platform. Because it was missing an entry in the index file, it was excluded from the published documentation when doing mdoc assemble.
When WaitHandle was imported from referencesource in f6fa8f0, the code was refactored and basically all WaitHandle.Wait* calls end up in WaitOneNative or WaitMultiple now.
On monotouch those methods threw a NotSupportedException when exitContext == true even before the import, so this behavior got inherited to some other methods that didn't throw after the exception was removed from them in 93e31cb. This broke tests in maccore and other code that passed exitContext=true.
To fix this, we just ifdef out the calls to SynchronizationAttribute on monotouch since they don't make sense there anyway since remoting isn't available. The commit that initially added the exception in 2ce9fc1 only did that to make the behavior consistent when the linker is enabled. By removing the calls we get the same result.
Do the same for Monitor so we're consistent.
We load these at runtime so they will naturally have undefined symbols. This is
not allowed under bitcode, though, and we use the static libraries in that case
anyway.
I cannot repro the issue mentioned in the comments of mono_method_can_access_method.
* FIXME:
* with generics calls to explicit interface implementations can be expressed
* directly: the method is private, but we must allow it. This may be opening
* a hole or the generics code should handle this differently.
* Maybe just ensure the interface type is public.
Remove calls to mono_lock_free_queue_node_init for nodes that just came out of mono_lock_free_queue_dequeue.
That call is superfluous as dequeue will set the returned node 'next' field to INVALID_NEXT, which is the
same thing the mono_lock_free_queue_node_init call did.
[utils] Fix MONO_SIGNAL_USE_UCONTEXT_T not being defined on tvOS simulator
In the maccore tvossimulator tests we were seeing the following assertion with the Mono 4.5 preview:
```
error: * Assertion: should not be reached at /Users/builder/data/lanes/1381/0d6923b4/source/maccore/external/mono/mono/utils/mono-context.c:194
0 dont link 0x000000010175702d mono_handle_native_sigsegv + 253
1 libsystem_platform.dylib 0x000000010a0cfeaa _sigtramp + 26
2 ??? 0x0000000001bfc4db 0x0 + 29344987
3 libsystem_c.dylib 0x0000000109e56cbc abort + 129
4 dont link 0x00000001018d1503 _ZL12log_callbackPKcS0_S0_iPv + 67
5 dont link 0x00000001018c26d0 monoeg_assertion_message + 192
6 dont link 0x00000001018af6de mono_sigctx_to_monoctx + 30
7 dont link 0x000000010183f473 sgen_suspend_thread + 323
8 dont link 0x000000010183f58e sgen_thread_handshake + 126
9 dont link 0x000000010183fb20 sgen_client_stop_world + 1296
10 dont link 0x0000000101871283 sgen_stop_world + 67
11 dont link 0x0000000101870d43 sgen_perform_collection + 99
12 dont link 0x0000000101872576 sgen_gc_collect + 102
13 dont link 0x00000001018d1886 _ZL7pump_gcPv + 54
14 libsystem_pthread.dylib 0x000000010a0b7c13 _pthread_body + 131
15 libsystem_pthread.dylib 0x000000010a0b7b90 _pthread_body + 0
16 libsystem_pthread.dylib 0x000000010a0b5375 thread_start + 13
```
This was caused by a4e257a07f, the issue is that the check was changed from UCONTEXT_REG_RAX to MONO_SIGNAL_USE_UCONTEXT_T, but that is only available when HAVE_SIGACTION is defined which it is not in this case.
Talked with Zoltan, fixing this by enabling MONO_SIGNAL_USE_UCONTEXT_T on all apple platforms for now.
/cc @vargaz @xmcclure
@monojenkins merge
1. Mark mono_array_clone external only. Runtime should use
mono_array_clone_checked.
2. Add MonoError* arg to mono_array_clone_in_domain.
3. Separate ves_icall_System_Array_Clone
Mark it external only. Runtime should use
mono_property_set_value_checked.
Note: mono_property_set_value_checked always catches exceptions from
managed code and threads them out via MonoError.
We need to make sure all external references have been resolved so that we
don't invoke the dynamic linker in the mono_sample_hit () callback which is
called in async-signal context.
There is a slight problem when we're using CLOCK_PROCESS_CPUTIME_ID: If we're
shutting down and there's largely no activity in the process other than waiting
for the sampler thread to shut down, it can take upwards of 20 seconds
(depending on a lot of factors) for us to shut down because the sleep
progresses very slowly as a result of the low CPU activity.
We fix this by repeatedly sending the profiler signal to the sampler thread in
order to interrupt the sleep.
We do not need to do this on platforms where we use a regular sleep based on a
monotonic clock. The sleep will return in a reasonable amount of time in those
cases.
The old code had quite a few problems:
1. It would result in stack corruption under heavy load, somehow. This typically
resulted in an assertion when starting the unwinding process because the
unwinding flags would be inconsistent.
2. It sometimes wrote complete garbage into the statistical buffers.
3. As a result of using the helper thread to assemble collected samples into log
buffers, it did not work on platforms where the helper thread is disabled.
4. Performance was poor under heavy load because waking up the helper thread to
assemble events would always trigger a counters sample + dump.
5. The code was very complicated and hard to understand/maintain.
(Points (1) and (2) can probably be attributed to point (5).)
In the new sampling world order, we use a lock-free allocator and a lock-free
reuse queue to acquire memory for sample hit events in the sample hit callback.
We then fill it with the info we collect during the async stack walk. Finally,
we ship it off to a separate dumper thread (via another lock-free queue) where
it gets turned into a log buffer and then shipped off to the writer thread.
This new approach appears very stable; I've yet to make it crash in any of the
stress tests I typically run. In a heavy workload, the helper thread's CPU
usage was previously around 25-30%. It is now down to basically 0% while the
dumper thread is only around 15%. CPU usage by threads that are collecting
samples is a bit higher than before, but only until the reuse queue converges
on a size that is big enough to satisfy all sample event requests. At that
point, no more allocations from the lock-free allocator happen, and performance
improves.
Our previous default (1000 Hz) was quite extreme and resulted in very high
overhead from the profiler for moderate workloads.
Also, fix the profiler to actually treat the 'freq' argument as a frequency
when passing it to the runtime. It was being incorrectly treated as a sleep
interval.
In the maccore tvossimulator tests we were seeing the following assertion with the Mono 4.5 preview:
```
error: * Assertion: should not be reached at /Users/builder/data/lanes/1381/0d6923b4/source/maccore/external/mono/mono/utils/mono-context.c:194
0 dont link 0x000000010175702d mono_handle_native_sigsegv + 253
1 libsystem_platform.dylib 0x000000010a0cfeaa _sigtramp + 26
2 ??? 0x0000000001bfc4db 0x0 + 29344987
3 libsystem_c.dylib 0x0000000109e56cbc abort + 129
4 dont link 0x00000001018d1503 _ZL12log_callbackPKcS0_S0_iPv + 67
5 dont link 0x00000001018c26d0 monoeg_assertion_message + 192
6 dont link 0x00000001018af6de mono_sigctx_to_monoctx + 30
7 dont link 0x000000010183f473 sgen_suspend_thread + 323
8 dont link 0x000000010183f58e sgen_thread_handshake + 126
9 dont link 0x000000010183fb20 sgen_client_stop_world + 1296
10 dont link 0x0000000101871283 sgen_stop_world + 67
11 dont link 0x0000000101870d43 sgen_perform_collection + 99
12 dont link 0x0000000101872576 sgen_gc_collect + 102
13 dont link 0x00000001018d1886 _ZL7pump_gcPv + 54
14 libsystem_pthread.dylib 0x000000010a0b7c13 _pthread_body + 131
15 libsystem_pthread.dylib 0x000000010a0b7b90 _pthread_body + 0
16 libsystem_pthread.dylib 0x000000010a0b5375 thread_start + 13
```
This was caused by a4e257a07f, the issue is that the check was changed from UCONTEXT_REG_RAX to MONO_SIGNAL_USE_UCONTEXT_T, but that is only available when HAVE_SIGACTION is defined which it is not in this case.
Discussed with Zoltan, fixing this by enabling MONO_SIGNAL_USE_UCONTEXT_T on all apple platforms for now.
1. MonoError-ize mono_remoting_wrapper icall.
This is a bit this method is allowed to use
mono_error_raise_exception: it is called from a
MONO_WRAPPER_REMOTING_INVOKE method which is considered a "protected
wrapper" in which the usual pending exception interruption check is a no-op.
2. Use mono_set_pending_exception in mono_marshal_set_domain_by_id icall
fixup f5dc934
The following test would trigger a SIGSEGV during a GC collection:
```
object _Lock;
C5.HashedLinkedList<byte[]> _Set;
List<byte[]> _Candidates;
void Run ()
{
_Lock = new object ();
_Set = new C5.HashedLinkedList<byte[]>(new Core.CommonUtils.ByteArrayComparer());
BuildList ();
for (var i = 0; i < 10; ++i) {
Task.Run (() => WorkOnSet ());
}
}
void BuildList() {
_Candidates = new List<byte[]>();
Random r = new Random();
for(var i = 0; i < 20; ++i) {
var key = new byte[16];
r.NextBytes(key);
_Candidates.Add(key);
}
}
void WorkOnSet() {
Random r = new Random();
for (;;) {
byte[] src = _Candidates [r.Next (_Candidates.Count)];
byte[] key = new byte[src.Length];
for (int i = 0; i < src.Length; ++i)
key [i] = src [i];
lock(_Lock) {
if(r.Next (2) != 0)
_Set.Add(key);
else
_Set.Remove(key);
}
}
}
```
The binary protocol just before the crash would be as follow:
```
collection_requested generation 0 requested_size 4096 force false
collection_begin index 14 generation 0
copy from 0x3150658 to 0x47e0e40 vtable 0x189f1780 size 24
gray_enqueue queue 0xa4a2d0 cursor 0x3b68178 value 0x47e0e40
gray_dequeue queue 0xa4a2d0 cursor 0x3b68178 value 0x47e0e40
scan_begin obj 0x47e0e40 vtable 0x189f1780 size 24
scan_process_reference obj 0x47e0e40 ptr 0x47e0e48 value 0x3150618
scan_process_reference obj 0x47e0e40 ptr 0x47e0e4c value 0x3150638
scan_process_reference obj 0x47e0e40 ptr 0x47e0e50 value 0x0 <----- here the value is 0x0
scan_process_reference obj 0x47e0db0 ptr 0x47e0dc0 value 0x47e0e40
collection_end 14 generation 0 scanned 0 unique 0 0.00%
wbarrier ptr 0x3af8710 value 0x47e0e40 value_vtable 0x189f1780
collection_requested generation 0 requested_size 4096 force false
collection_begin index 15 generation 0
collection_end 15 generation 0 scanned 0 unique 0 0.00%
collection_requested generation 0 requested_size 4096 force false
collection_begin index 16 generation 0
card_scan start 0x47e0df8 size 520
scan_begin obj 0x47e0e40 vtable 0x189f1780 size 24
scan_process_reference obj 0x47e0e40 ptr 0x47e0e48 value 0x47b4d40
scan_process_reference obj 0x47e0e40 ptr 0x47e0e4c value 0x47b03c0
scan_process_reference obj 0x47e0e40 ptr 0x47e0e50 value 0x3100800 <----- here the value is 0x3100800, but no WB in between
```
Object at 0x47e0e40 is a C5.HashSet<T>.Bucket with T a C5.KeyValuePair<byte[],C5.HashedLinkedList<byte[]>.Node>. The memory layout of C5.HashSet<T>.Bucket would be as follow:
class Bucket {
item: offset 8 size 8
overflow: offset 16 size 4
hashval: offset 20 size 4
}
So the bug would manifest itself as a missing write barrier when writing to Bucket.overflow, leading to the premature sweeping of a Bucket object. The Bucket.overflow value would then point to the middle of an object, triggering a SIGSEGV when trying to access its vtable.
When running basic make check in mono/mini there are some hidden errors in the check-seq-points test. Current test compares output between JIT and AOT compile assemblies but doesn't pay attention to the result of the as and ld calls building the AOT:ed modules. It turns out that the linkage of the AOT compiled module on win32 x86 actually fails due to naming of symbols included in .def or .globl assembler expressions. The fix makes sure that local function symbols or global symbol definitions follows the cdecl win32 x86 convention and are prefixed with _. The fix tries to resolve this using two different strategies. Since there are many code paths in the AOT compiler emitting local/global symbols + referencing the emitted symbols, it doesn't look like there is one place to fix this (unless rename the symbol altogether and that could cause regressions elsewhere).
First, local function symbols are emitted using .def expression when used as debug symbols. By prefixing debug symbols with _ will resolve most of the local function symbols. By mangling the debug symbols we can fix both emitted symbols and references to these symbols in two location (get_debug_sym, get_plt_entry_debug_sym).
Second, in order to make sure all other symbols (local/global) ending up in .def or .globl expressions are correctly mangled, the functions to emit local/global symbols in aot-compiler.c have been extended to check mangling on passed in symbols before emitting. If passed in symbol doesn't follow the name mangling rule, the symbols will be mangled and the mangled symbol will be emitted together with a label to the mangled symbol. This is done to make sure we have a correct label for the emitted symbol that can be used by the linker. Since the rest of the code is unaware of the mangled name, it will continue reference the unmangled name and since there is already a label to the unmangled symbol, the mangling will be transparent for the rest of the code.
NOTE, the fix only applies to windows X86 build, other configurations are not affected by this issue.
This PR also includes a fix detected on windows when debugging and fixing above issue. The AOT compiler tries to rename linked module to the final target name, for example from basic.exe.dll.tmp to basic.exe.dll. If the file already exist, the rename will fail on windows causing a silent failure in the AOT compiler and this will "leak" the tmp file + ending up with the old basic.exe.dll. The fix is to check result of the rename function call and if it fails with "file already exist error", unlink target and redo rename operation. The rename can still fail due to other reasons ending up in the same problem, but to make a good fix, the error handling of the method needs to be revisited in order to properly clean up tmp files and allocations in error cases. This will be handled in a different PR.
Fix undefined behaviour in left-shift.
This PR fixes a left-shift that relied on undefined behaviour.
Clang emitted the following warning (prior to this patch):
```
sgen-descriptor.c:189:54: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
return desc | VECTOR_SUBTYPE_REFS | ((gssize)(-1) << 16);
~~~~~~~~~~~~ ^
```
Mark mono_store_remote_field_new external only.
Runtime should use mono_store_remote_field_new_checked.
Change mono_marshal_get_stfld_remote_wrapper to use
mono_store_remote_field_new_icall instead of a native call.
Add mono_load_remote_field_new_checked. Mark mono_load_remote_field_new
external only. Add icall mono_load_remote_field_new_icall and use it in
remoting wrappers.
[appdomain] Cleanup MonoError code
1. Assert in mono_get_corlib_version instead of raising an exn.
2. Don't raise in mono_domain_create_appdomain external API function.
3. Assert in mono_domain_assembly_postload_search instead of raising.
4. Don't raise in mono_domain_fire_assembly_load.
5. Use mono_error_set_pending_exception in
ves_icall_System_AppDomain_InternalGetProcessGuid
6. Dont' raise in unload_thread_main, populate unload_data instead.
Added support for SHA256, 384 and 512 in AuthenticodeDeformatter.
Due to the changes introduced by Microsoft to require signing with stronger algorithms, SHA-256, SHA-384 and SHA-512 support was needed.
This change is released under the MIT license.
There could be a race between System.Net.Sockets.Socket:Close_internal and the io threadpool cleanup, which would lead to a native crash. That's because the io threadpool cleanup would clean the mutex, condition variables as well as close the sockets.
The easiest way to fix that is by cleaning only what's going to stop the runtime from shutting down, and in this case the background selector thread. The same is done for the threadpool where we just shutdown the monitor thread and the worker threads.
Due to the changes introduced by Microsoft to require signing with stronger algorithms, SHA-256, SHA-384 and SHA-512 support was needed.
This change is released under the MIT license.
[marshal] Ensure marshal code emit the right indirect store when dealing with ref types.
The marshal code was using CEE_STIND_I for a lot of ref stores. This would not
generate a WB and is a heap corruption vector.
Part of man-page showing this interface:
PTHREAD_GETNAME_NP(3) Library Functions Manual PTHREAD_GETNAME_NP(3)
NAME
pthread_getname_np - get and set descriptive name of a thread
LIBRARY
POSIX Threads Library (libpthread, -lpthread)
SYNOPSIS
#include <pthread.h>
int
pthread_getname_np(pthread_t thread, char *name, size_t len);
int
pthread_setname_np(pthread_t thread, const char *name, void *arg);
-- pthread_setname_np(3)
The .orig files are traditionally files of patch(1) and diff(1) tools.
Remove stale file Makefile.orig as it is generating false positives for
grabbing patches from a directory tree.
[metadata] Don't require HandleRef in domain.c
In 1da6b76297 loading of System.Runtime.InteropServices.HandleRef
was changed from optional to required. This caused errors in the maccore tests:
```
MONO_PATH=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/64/Build /Users/builder/data/lanes/1411/5ca65b46/source/maccore/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/bin/arm64-darwin-mono-sgen --debug -O=gsharedvt --aot=mtriple=arm64-ios,data-outfile=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/System.arm64.aotdata,static,asmonly,direct-icalls,full,dwarfdebug,no-direct-calls,outfile=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/System.dll.arm64.s "/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/64/Build/System.dll"
Runtime critical type System.Runtime.InteropServices.HandleRef not found
AOT Compilation exited with code 134, command:
```
@monojenkins merge
In 1da6b76297 loading of System.Runtime.InteropServices.HandleRef
was changed from optional to required. This caused errors in the maccore tests:
```
MONO_PATH=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/64/Build /Users/builder/data/lanes/1411/5ca65b46/source/maccore/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/bin/arm64-darwin-mono-sgen --debug -O=gsharedvt --aot=mtriple=arm64-ios,data-outfile=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/System.arm64.aotdata,static,asmonly,direct-icalls,full,dwarfdebug,no-direct-calls,outfile=/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/System.dll.arm64.s "/Users/builder/data/lanes/1411/5ca65b46/source/maccore/msbuild/tests/MyKeyboardExtension/obj/iPhone/Debug/mtouch-cache/64/Build/System.dll"
Runtime critical type System.Runtime.InteropServices.HandleRef not found
AOT Compilation exited with code 134, command:
```
gmcs and ilasm2 are no longer distributed with Mono.
The run-test step had several issues that prevented it from running,
e.g. the comments caused "unexpected end of line" issues on OSX.
Improve shell portability on NetBSD
The "test" command, as well as the "[" command, are not required to know
the "==" operator.
Comparing with empty strings ("") might lead to unspecified results.
Replace unportable shell loops:
for I in {2..6}; do ..; done
with POSIX ones:
I=2; while [ $I -le 6 ]; do ..; I=$((I + 1)); done
The "test" command, as well as the "[" command, are not required to know
the "==" operator.
Comparing with empty strings ("") might lead to unspecified results.
Replace unportable shell loops:
for I in {2..6}; do ..; done
with POSIX ones:
I=2; while [ $I -le 6 ]; do ..; I=$((I + 1)); done
The <sys/errno.h> header on NetBSD declares only a list of ERROR values.
This fixes the following build issue:
In file included from ../../mono/utils/mono-proclib.h:7:0,
from mono-proclib.c:8:
mono-proclib.c: In function 'mono_cpu_usage':
mono-proclib.c:893:54: error: 'errno' undeclared (first use in this function)
g_error ("getrusage() failed, errno is %d (%s)\n", errno, strerror (errno));
^
../../eglib/src/glib.h:600:70: note: in definition of macro 'g_error'
#define g_error(...) do { g_log (G_LOG_DOMAIN, G_LOG_LEVEL_ERROR, __VA_ARGS__); for (;;); } while (0)
^
mono-proclib.c:893:54: note: each undeclared identifier is reported only once for each function it appears in
g_error ("getrusage() failed, errno is %d (%s)\n", errno, strerror (errno));
^
../../eglib/src/glib.h:600:70: note: in definition of macro 'g_error'
#define g_error(...) do { g_log (G_LOG_DOMAIN, G_LOG_LEVEL_ERROR, __VA_ARGS__); for (;;); } while (0)
The problem here was that the function was not correctly setting is_generic when handling partially inflated methods.
The working scenario was method 'Foo<A>::Bar<B>' inflated with (Something<Else>;)[1] resulting in Foo<Something<Else>>::Bar<B>.
This would work because the is_generic check would verify that the supplied context has no method_inst, thus had to remain a GMD.
The problematic one would be inflating Foo<Something<A>>::Bar<B> with (Else;) resulting too in Foo<Something<Else>>::Bar<B>.
To handle this, we would first extract the root method definition [2] and then inflate the original method context with the supplied
context. So we end up with Foo<A>::Bar<B> and inflate (Something<A>;B) with (Else;) resulting in (Something<Else>;B) *1*.
Finally, we would inflate Foo<A>::Bar<B> with that new context, resulting in Foo<Something<Else>>::Bar<B>.
The resulting method is the same in both scenarios, but context used for inflation is different in that in the second case
it includes the GMD method instantiation (The B in *1*).
This would trip up the computation of whether we ended up with a GMD or not.
The right check, though, is not whether the inflation context has a method instantiation or not, but whether the resulting method
has the same method context as the root GMD[2].
This affected #29585 since disabling some optimizations triggered things to be inflated in different ways.
[1] (Something<Else>;) means a context with a class instantiation and no method instantiation
[2] The GMD defined on the GTD.
<configuration><configSections><section> in a .config file takes a
type name as argument. Some of the allowed types are in System.dll.
The type lookup is done in System.Configuration.dll and does not find
these types. Check System.dll as a fallback to fix this.
This appears to have been copied from Boehm, but here we are not responsible for zeroing.
Also, 's->chars [len]' is not the same as 'align_up (s + size) - 2', so this was corrupting canaries.
The first nursery collection after the start of a concurrent collection allocated mod union card tables for all blocks. Allocate it only for blocks that have dirty cards. Blocks without a mod_union are not scanned in the major collector. This can reduce the pause time of those nursery collections by half.
[sgen] Scan pinned objects in nursery as part of concurrent mark
Objects pinned in the nursery can hide behind them a large graph of objects in the heap which is never scanned because we don't follow references in the nursery. After precleaning, we scan the latest set of pinned objects (while locking in order to make sure that the set doesn't change, so none are moved).
One overlooked aspect of mach is that its calls are interruptible and
we never really accounted for that.
This problem turned up when sampling at high frequency as they would
start to randomly fail.
'make check-seq-points' on Cygwin 2.4.1 64-bit.
* Added removal of *.exe.dll to the clean_aot() function to delete AOT output
from previous 'make check-seq-points' runs.
* Use ';'' as separator in MONO_PATH if running under Cygwin rather than ':'.
Objects pinned in the nursery can hide behind them a large graph of objects in the heap which is never scanned because we don't follow references in the nursery. After precleaning, we scan the latest set of pinned objects (while locking in order to make sure that the set doesn't change, so none are moved).
NativeMethods.GetExitCodeProcess would inherently be broken on Unix platforms for non-child processes as it can't succesfully get the exit code. This would in turn break Process.HasExited, which should not break, as it is possible to check if a non-child process is alive or dead.
Instead of opening a file for the sole purpose of calling
F_GETPATH on the resulting descriptor, we can just use the
native realpath() function; as a side benefit, this also works
on *BSD where F_GETPATH isn't supported.
Per current .NET, exception serialization may be implemented using the
SerializeObjectState event. Use of this approach is mandatory for
certain classes, such as HttpRequestException subclasses. Mono does
not support it. The solution is to switch out our System.Exception
implementation for the referencesource one.
To accommodate this, classes that access System.Exception internal
fields directly must switch to the new field names; a new support
method is added to System.Environment; the "security level" methods
and icall are added to MonoCMethods; and the field order in
_MonoException must be adjusted. A new test is also added in the
System.Runtime.Serialization assembly.
jlorenss/win x64 support
Initial fixes needed in order to get pass on mono regression tests for windows x64 visual studio build,
--regression basic.exe basic-float.exe basic-long.exe basic-calls.exe objects.exe arrays.exe basic-math.exe exceptions.exe iltests.exe devirtualization.exe generics.exe basic-simd.exe
Before fixes there were failures in basic.exe, exceptions.exe and objects.exe for windows x64 Visual studio build.
Failures in basic.exe and exceptions.exe was due to a mix up of signal defines on windows platform in Visual Studio build where SIGILL and SIGFPE was defined differently in different source files causing incorrect signal handler to be invoked at runtime, causing incorrect thrown .NET exception. Fix is to make sure signal.h is always included giving the same value for SIGILl and SIGFPE over all source files.
Failures in objects.exe test_0_mul_ovf_regress_36052 caused a stack overflow crash when running togehter with branch optimization mode. This was due to incorrect lowering of x64 test instruction when optimization moved over to use R8 instead of RAX and current lowering didn't handle that correctly meaning that the actual test was performed against wrong register causing a loop that caused a stack overflow error. The specific amd64 codegen , amd64_test_reg_imm, is currently only used on x64 windows platform for the stackalloc call.
In SSCX.OSX509Certificates.GetCertificate(), we cannot simply use
'X509Certificate.Handle' because it may point to something that's
not a SecCertificate.
(cherry picked from commit 3fc068f7e2)
In the lazy sweep case, the sweep job doesn't sweep the blocks. Instead, the blocks are swept when they are actually needed (when we want to allocate in the block, scan the block etc.). This delays the mutator or increases the nursery pauses. Try to sweep as many blocks as possible concurrently, immediately after we finish the sweep job.
Currently only triggered by objects.exe regression test on windows x64 with branch opt, since stackalloc gets lowered to this test and branch will start using R8 instead of RAX for the test.
Caused incorrect exception behavior and failures in basic.exe, exceptions.exe regression test on x64 windows. This was due to the fact that some source files didn't include signal.h while others did. In case where signal.h was not included incompatible defines were used for SIGILL and SIGFPE in mini-amd64.h.
x86 cleanups for register arguments
Best I can tell, cinfo->args and cfg->args need to be independent before implementing calling conventions where some arguments are in registers, at least if we want to do it cleanly. Also, storing the argument offset in a cfg->args instruction that claims to be for a register seems hacky and confusing to me.
We decompose them as part of the cprop pass to handle more immediates and to further propagate copies.
The native backend of some architectures (for example x86) may support long shifts with specialized instructions. Even there, this still makes immediate shifts 2 times faster because long ops are poorly handled by the jit.
On arm, where we were emulating, this makes long immediate shifts 3-5 times faster.
[sgen] Set ARCH_MIN_MS_BLOCK_SIZE to 64k on both ppc32 and ppc64.
This fixes a problem that was happening on Debian ppc32 build machines. Since
they are set up as a 32-bit userland on a 64-bit kernel, Mono would be compiled
with an ARCH_MIN_MS_BLOCK_SIZE value of 16k. However, at runtime, the system
page size would be 64k (due to the 64-bit kernel with PPC_64K_PAGES set).
Signed-off-by: `Alex Rønne Petersen <[email protected]>`
[metadata] Ifdef out an icall that is not available in the DISABLE_REFLECTION_EMIT case
It caused errors like the following on the maccore builds:
```
CCLD libmonosgen-2.0.la
Undefined symbols for architecture armv7k:
"_mono_reflection_get_custom_attrs_blob_checked", referenced from:
_ves_icall_System_Reflection_Emit_CustomAttributeBuilder_GetBlob in libmonoruntimesgen.a(libmonoruntimesgen_la-icall.o)
ld: symbol(s) not found for architecture armv7k
```
---
This is the last patch required for getting maccore master to build again with mono master.
@monojenkins merge
This is the support that makes it so that mkbundle can create self-contained executables without requiring a native toolchain to be present. Also is the foundation to allow cross-compilation of self-contained executables.
This works by concatenating the runtime with the various dependencies and configuration files, attaching a directory at the end of the file and a signature to flag this as a runtime that has embedded resources in the executable file itself.
This works by modifying the runtime startup to check for a special signature at the end of the main executable, if it is not present, execution resumes as usual. Otherwise a directory is read from the end of the file which contains both the kind of file (assembly, configuration file, and so on), as well as pointer to the contents in the file. Then the regular Mono APIs to load resources are used to load these.This is the support that makes it so that mkbundle can create self-contained executables without requiring a native toolchain to be present. Also is the foundation to allow cross-compilation of self-contained executables.
This works by concatenating the runtime with the various dependencies and configuration files, attaching a directory at the end of the file and a signature to flag this as a runtime that has embedded resources in the executable file itself.
This works by modifying the runtime startup to check for a special signature at the end of the main executable, if it is not present, execution resumes as usual. Otherwise a directory is read from the end of the file which contains both the kind of file (assembly, configuration file, and so on), as well as pointer to the contents in the file. Then the regular Mono APIs to load resources are used to load these.
It caused errors like the following on the maccore builds:
```
CCLD libmonosgen-2.0.la
Undefined symbols for architecture armv7k:
"_mono_reflection_get_custom_attrs_blob_checked", referenced from:
_ves_icall_System_Reflection_Emit_CustomAttributeBuilder_GetBlob in libmonoruntimesgen.a(libmonoruntimesgen_la-icall.o)
ld: symbol(s) not found for architecture armv7k
```
This fixes a problem that was happening on Debian ppc32 build machines. Since
they are set up as a 32-bit userland on a 64-bit kernel, Mono would be compiled
with an ARCH_MIN_MS_BLOCK_SIZE value of 16k. However, at runtime, the system
page size would be 64k (due to the 64-bit kernel with PPC_64K_PAGES set).
Signed-off-by: Alex Rønne Petersen <[email protected]>
Apparently Windows doesn't free this debug info in Vista+ when calling
DeleteCriticalSection [1], so just avoid allocating it in the first place by
calling InitializeCriticalSectionEx with the CRITICAL_SECTION_NO_DEBUG_INFO
flag. This function is only available in Vista+, but we've dropped support for
XP anyway.
[1] http://stackoverflow.com/a/889853
We don't evacuate from full blocks. When it comes to blocks that have free slots, instead of evacuating all of them to a new set of blocks, aim to keep the fuller blocks around and evacuate the emptier ones into them.
[profiler] Fix incorrect initial writer semaphore value.
This was used during debugging. I forgot to revert it back to 0 before posting
the pull request (#2838). This led to ~3-5% more CPU usage by the writer thread
than actually necessary; it now sits around 0-1% for typical workloads.
The overloaded GetValidator() which takes both 'MonoTlsSettings'
and 'MonoTlsProvider' is actually used by the test suite, so let's
keep it public.
(cherry picked from commit 0977d531d2)
babysitter generates some temp paths in python when running under cygwin, which breaks down
when those paths are passed to the native Windows mono.exe during testing:
Exception in TestRunnerThread ---> System.IO.DirectoryNotFoundException: Could not find a part of the path "C:\cygdrive\c\WINDOWS\TEMP\tmpC4K5yK\babysitter_report_current_test_file.txt".
This was used during debugging. I forgot to revert it back to 0 before posting
the pull request (#2838). This led to ~3-5% more CPU usage by the writer thread
than actually necessary; it now sits around 0-1% for typical workloads.
[profiler] Fix usage of the lock-free queue API.
* Free nodes hazardously.
* No need to unpoison nodes since we're not reusing them.
* Fix memory leak when emptying coverage queues.
1. icall `mono_image_module_basic_init`
2. icall `mono_reflection_sighelper_get_signature_local`
3. icall `mono_reflection_sighelper_get_signature_field`
4. API function mono_module_get_object
5. API function mono_type_get_object
6. API function mono_method_get_object
7. API function mono_field_get_object
8. API function mono_property_get_object
9. API function mono_event_get_object
1. static function `create_custom_attr` (set MonoError exception instance)
2. icall `mono_reflection_resolve_custom_attribute_data` (set pending
exception from MonoError). Also rename it to
ves_icall_System_Reflection_CustomAttributeData_ResolveArgumentsInternal
3. icall `mono_reflection_bind_generic_method_parameters` (set pending
exception from MonoError) Not renaming this one because it's actually
used for two icalls:
System.Reflection.Emit.MethodBuilder.MakeGenericMethod and System.Reflection.MonoMethod.MakeGenericMethod_impl
Change icall name to
ves_icall_System_Reflection_Emit_TypeBuilder_create_generic_class
Give mono_reflection_create_generic_class a MonoError argument,
and get rid of the redundant mono_reflection_create_generic_class_checked
Some Jenkins workers (e.g. the s390x one) have an earlier python version installed where the babysitter doesn't work.
Fall back to timeout in those cases.
* Mono.Security.Interface.ICertificateValidator2:
new internal interface, deriving from ICertificateValidator.
* Mono.Security.Interface.CertificateValidationHelper:
the internal GetValidator() now returns ICertificateValidator2.
* Mono.Security.Interface.MonoTlsProvider:
make HasCustomSystemCertificateValidator and InvokeSystemCertificateValidator()
internal and use ICertificateValidator2.
* Mono.Net.Security.ChainValidator:
implement ICertificateValidator2; we may now be called with a
fully-built X509Chain.
* corlib, System, Mono.Security:
add [assembly: InternalsVisibleTo].
[profiler] Use a semaphore to signal the writer thread.
We would previously constantly try to dequeue from the writer queue which would
result in extremely high CPU usage, making many apps (e.g. Xamarin Studio)
nearly unusable.
[corlib] Type.GetType parser and resolver improvements
We have two type parsers the one invoked by `Type.GetType(string)` (and some others) which is implemented in C in `reflection.c`, and the one invoked by `Type.GetType(string, Func<...>, Func<...>)` implemented in managed code as `System.TypeSpec`.
In both cases `string→Type` conversion goes in two stages: parsing and resolution. Parsing just changes the string into an AST. And resolution crawls the AST and constructs the appropriate types.
This fixes [Bugzilla #40060](https://bugzilla.xamarin.com/show_bug.cgi?id=40060)
1. Fix the resolver on the native side for types like `"System.Generic.Collections.Dictionary[System.Int32,MyType]"` where the generic type is from corlib and a type argument is from the current assembly.
2. Fix `get_caller_no_reflection` to work correctly when the call stack has a System.Reflection method as the immediate caller of the icall.
3. Fix the resolver on the native side to work when it's called from corlib's System namespace, not just System.Reflection.
4. Fix the managed parser to work with types like `"MyGeneric[MyType]"` where the generic argument is not an assembly qualified name or there's a mixture of aqn and non-aqn type arguments. Also rationalize how the code handles assembly qualification in general.
5. Test cases
We would previously constantly try to dequeue from the writer queue which would
result in extremely high CPU usage, making many apps (e.g. Xamarin Studio)
nearly unusable.
1. Assert in mono_get_corlib_version instead of raising an exn.
2. Don't raise in mono_domain_create_appdomain external API function.
3. Assert in mono_domain_assembly_postload_search instead of raising.
4. Don't raise in mono_domain_fire_assembly_load.
5. Use mono_error_set_pending_exception in
ves_icall_System_AppDomain_InternalGetProcessGuid
6. Dont' raise in unload_thread_main, populate unload_data instead.
.. attribute for CurrentSolutionConfigurationContents .
<CurrentSolutionConfigurationContents>
<SolutionConfiguration xmlns="">
<ProjectConfiguration Project="{82323650-6C2A-4FAC-91C6-A715C2FE9CB2}" AbsolutePath="/Users/ankit/test/msbuild/bug40094/App1/App1\App1\App1.csproj">
Release|AnyCPU
</ProjectConfiguration>
...
Related to fix for bxc #40094
Previously for types like "Foo[P,Q]" the recursive call of the parser
would incorrectly consume the delimiter after a type argument (ie the
',' or ']') which would leave the caller potentially past the end of the
string which would signal a failed parse. New behavior is to peek at
the delimiter but leave it up to the caller to consume.
Also `Type.GetType(name, null, null)` should behave like
`Type.GetType(name)` (previously it dropped generic type arguments).
type_from_parsed_name is a helper for
ves_icall_System_Type_internal_from_name which is called directly from
System.Type as well as indirectly by System.TypeNameParse. We should
skip over all those classes to find the managed caller.
This fixes the remainder of [40060](https://bugzilla.xamarin.com/show_bug.cgi?id=40060)
In order to find the user code that called some corlib API
that calls an icall, we write:
dest = m = mono_method_get_last_managed ();
mono_stack_walk_no_il (get_caller_no_reflection, &dest);
if (!dest) dest = m;
The get_caller_no_reflection walk works in two stages: in the first
stage we look for the target method (the initial value of dest) when we
find the target we set dest to NULL and then the second stage continues
walking upward past the reflection APIs.
However if the target method is itself in System.Reflection, the
old implementation would skip over it even in the first stage and we'd
never find the target method and exhaust the whole stack.
The fix is to move the check for the target method before the check for
the Reflection API methods.
And in type_from_parsed_name pass the calling image as the metadata
context even if the initial class we're looking for is in corlib.
This lets calls like
Type.GetType ("System.Collections.Generic.Dictionary<int, MyClass<int>>")
succeed. (Previously we would firs try to find
System.Collections.Generic.Dictionary in the calling assembly,
which would fail outside of corlib, and then we'd retry with the
rootimage as corlib which would find Dictionary, but fail to find
MyClass. Note that this was only broken if the outermost type was in
corlib. It always worked deeper in generic type arguments provided
we startd in the calling assmebly:
Type.GetType ("MyClass<System.Collections.Generic.Dictionary<int, MyClass<int>>>")
This fixes part of [40060](https://bugzilla.xamarin.com/show_bug.cgi?id=40060)
According to http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0068b/CIHEEIDJ.html the MRC instruction is documented as:
MRC{cond} coproc, opcode1, Rd, CRn, CRm{, opcode2}
with coproc being "the name of the coprocessor the instruction isfor. The standard name is pn, where n is an integer in the range 0-15."
GCC seemed to accept the operand without the 'p' prefix but clang raised an "invalid operand for instruction" error.
In some platforms, C enums might be considered unsigned, and in that case we'd get the following warning:
mono/mono/metadata/marshal.c:5108:12: warning: comparison of constant -1 with expression of type 'MonoMarshalConv' is always false
[-Wtautological-constant-out-of-range-compare]
if (conv == -1) {
~~~~ ^ ~~
The explicit cast should do the right thing.
Log buffers can end up with a zero thread ID when we synthesize events on the
writer thread, leading to mprof-report thinking a thread exists with that ID.
We simply ignore the "zero thread" in the thread summary.
If we don't do this, mprof-report will pick up on the fact that the helper and
writer threads exist and print them in the thread summary with no names. It's
OK to zero out the thread ID as the kinds of events we write from these threads
cannot be meaningfully associated with the log buffer's thread ID (or in the
case of counters, any thread ID).
We only set the native name as MS.NET leaves the managed name for the main
thread as null. At least by setting the native name, we get a nice name in GDB.
The profiler helper thread does a full attach for on-demand heapshots. Since we
collect no actual data for the helper thread, there's no reason to report it.
A double init could happen when profiling as we'd call mono_gc_base_init ()
from mono_profiler_load () early on, and then later call it again during the
normal startup sequence.
Previously, we would shut down the profiler so early that it would never see
unload events for threads, domains, etc. This sounds harmless at first, but
since the profiler dumps the remaining data in the thread-local log buffer to
disk from within the thread end callback, we would often miss events near the
end of a thread's lifetime.
Shutting down the profiler after the major runtime components doesn't appear to
have any negative effects, which makes sense as all managed threads should be
stopped by this point.
Strong Togglerefs must be considered as roots for the purpose of Ephemeron processing.
Otherwise you make it not possible to use a toggleref object as key.
Fix uninitialized MonoError in mono_basic_block_split
Follow-up on PR #2781 which removed a mono_error_init leading to memory unsafety. This was causing crashes when verifying assemblies in the 4.4 branch although it does not seem to have caused any known problems in master for some reason.
The recent changes to the mobile profiles introduced generated files in their .sources like CommonCrypto/MD5CryptoServiceProvider.g.cs
However, those are not generated when the mobile profiles aren't enabled at configure time.
This caused a problem during "make dist" since it tries to grab the entries in .sources from *all* profiles, causing errors like:
cp: cannot stat ‘CommonCrypto/MD5CryptoServiceProvider.g.cs’: No such file or directory
make[5]: *** [dist-local] Error 1
The easiest fix is to filter out those generated files.
Any native function that can modify errno should have the
SetLastError attribute set to true. Also, no need to specify
EntryPoint if it's the same as the function name.
[corlib] Fix exception in __ComObject finalizer during shutdown
* keep a reference to a __ComObject's proxy so it doesn't get garbage
collected
* don't create __ComObjects unnecessarily
* Fix for bug [24974](https://bugzilla.xamarin.com/show_bug.cgi?id=24974)
We hit this on Jenkins over the weekend:
https://jenkins.mono-project.com/job/test-mono-mainline/label=osx-amd64/3845/parsed_console/log_content.html#WARNING1
```
Unhandled Exception:
System.InvalidOperationException: Cannot process request because the process (51792) has exited.
at System.Diagnostics.Process.GetProcessHandle (Int32 access, Boolean throwIfExited) <0x10d7ea000 + 0x001b6> in <filename unknown>:0
at System.Diagnostics.Process.GetProcessHandle (Int32 access) <0x10d7f2fd0 + 0x0001e> in <filename unknown>:0
at System.Diagnostics.Process.Kill () <0x10d7f2ee0 + 0x00031> in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:Kill ()
at TestRunner+<Main>c__AnonStorey0.<>m__0 () <0x10a9b50b0 + 0x00e30> in <filename unknown>:0
at System.Threading.ThreadHelper.ThreadStart_Context (System.Object state) <0x10c55bc90 + 0x0009a> in <filename unknown>:0
at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, Boolean preserveSyncCtx) <0x10c55a210 + 0x001c6> in <filename unknown>:0
at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, Boolean preserveSyncCtx) <0x10c55a1e0 + 0x00020> in <filename unknown>:0
at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state) <0x10c55a130 + 0x00059> in <filename unknown>:0
at System.Threading.ThreadHelper.ThreadStart () <0x10c55be50 + 0x0002e> in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.InvalidOperationException: Cannot process request because the process (51792) has exited.
at System.Diagnostics.Process.GetProcessHandle (Int32 access, Boolean throwIfExited) <0x10d7ea000 + 0x001b6> in <filename unknown>:0
at System.Diagnostics.Process.GetProcessHandle (Int32 access) <0x10d7f2fd0 + 0x0001e> in <filename unknown>:0
at System.Diagnostics.Process.Kill () <0x10d7f2ee0 + 0x00031> in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:Kill ()
at TestRunner+<Main>c__AnonStorey0.<>m__0 () <0x10a9b50b0 + 0x00e30> in <filename unknown>:0
at System.Threading.ThreadHelper.ThreadStart_Context (System.Object state) <0x10c55bc90 + 0x0009a> in <filename unknown>:0
at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, Boolean preserveSyncCtx) <0x10c55a210 + 0x001c6> in <filename unknown>:0
at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, Boolean preserveSyncCtx) <0x10c55a1e0 + 0x00020> in <filename unknown>:0
at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state) <0x10c55a130 + 0x00059> in <filename unknown>:0
at System.Threading.ThreadHelper.ThreadStart () <0x10c55be50 + 0x0002e> in <filename unknown>:0
make[1]: *** [test-generic-sharing-managed] Error 1
```
We can't do anything about those errors, so just catch and ignore it.
[Profiler] Keep a reference to assemblies while coverage is running
In certain circumstances, for example when running under nunit-console, assemblies could be unloaded while the profiler still had a reference to them in order to generate the coverage data. In these cases, the memory referred to by the profiler would be invalid and would crash.
Fix this by incrementing the reference count of the assemblies preventing them from being unloaded while coverage is being collected.
Fixes BXC #39325
- Back out MONO_PROFILER_LIB_DIR change
- Profiler loading traces should use log mask “dll” not “asm”
- mono_dl_open_runtime_lib should preempt standard paths when loading
profiler
- mono_dl_open_runtime_lib should check in profiler library directory
- mono_dl_open_runtime_lib contained a memory leak
- With above changes, ptestrunner.pl can remove some environment
massaging
Fixes#4242, see bug comments. JsonSerializer seems to have been already
fixed in abe9dc62. The JsonDeserializer number conversion is now much
stricter, allowing only integer number style for integers and float number
style for floats.
[profiler] Use a background thread to send out sampling signals.
Previously, when using an interval timer, the initial profiling signal could be
delivered to *any* thread in the process. This is not normally a problem, but
if the signaled thread has not even finished its initialization inside libc, it
can happen that it hasn't even set up thread-local storage yet. We then blow up
spectacularly when trying to back up errno in the SIGPROF signal handler, as
it's a TLS variable. Even the SIGSEGV handler blows up immediately after as it
can't access JIT TLS data.
Since there appears to be no reliable and portable way for a library like Mono
to control which exact thread gets the initial timer signal, instead switch to
using a background thread that uses a high-resolution sleep and attempts to
switch itself to real time scheduling if possible. This way, we have full
control over which threads we send SIGPROF to, letting us avoid any threads
which aren't in a 'good' state for profiling.
This commit also gets rid of the multiplexing that was going on in the SIGPROF
signal handler, since we now send out the signals from a background thread. As
this was the only use of the async job API, that API has been removed. This
indirectly fixes the signal storming issue that sometimes popped up, where for
some reason multiple threads would think that they're the initiating thread,
resulting in way too many signals going out.
A nice side-effect of doing the signaling ourselves is that we can now use
real-time signals on systems that have them (e.g. Linux), resulting in a nearly
100% signal delivery rate in all cases. Previously, we would lose a tremendous
amount of signals when an application was under heavy load.
Previously, when using an interval timer, the initial profiling signal could be
delivered to *any* thread in the process. This is not normally a problem, but
if the signaled thread has not even finished its initialization inside libc, it
can happen that it hasn't even set up thread-local storage yet. We then blow up
spectacularly when trying to back up errno in the SIGPROF signal handler, as
it's a TLS variable. Even the SIGSEGV handler blows up immediately after as it
can't access JIT TLS data.
Since there appears to be no reliable and portable way for a library like Mono
to control which exact thread gets the initial timer signal, instead switch to
using a background thread that uses a high-resolution sleep and attempts to
switch itself to real time scheduling if possible. This way, we have full
control over which threads we send SIGPROF to, letting us avoid any threads
which aren't in a 'good' state for profiling.
This commit also gets rid of the multiplexing that was going on in the SIGPROF
signal handler, since we now send out the signals from a background thread. As
this was the only use of the async job API, that API has been removed. This
indirectly fixes the signal storming issue that sometimes popped up, where for
some reason multiple threads would think that they're the initiating thread,
resulting in way too many signals going out.
A nice side-effect of doing the signaling ourselves is that we can now use
real-time signals on systems that have them (e.g. Linux), resulting in a nearly
100% signal delivery rate in all cases. Previously, we would lose a tremendous
amount of signals when an application was under heavy load.
Various cleanups on profiler
3 commits:
Assist on profiler module loading
- Add a MONO_PROFILER_LIB_DIR from which profiler modules are
dynamically loading, in case it is not the normal library path
- Add information about profiler loading to mono_trace
Comments and clarity in proflog.c
- Add comments on structures
- Rename 'data' and 'data_end' to 'cursor' and 'buf_end' in LogBuffer/StatsBuffer as the old names were confusing
- Add new assert when processing samples
Improve a safety check when writing data into StatBuffer
- The safety check should occur such that if the new value for
StatBuffer::cursor is beyond the bounds of the StatBuffer, the cursor
is not updated.
Fix hazard free
Replace usage of mono_thread_hazardous_free_or_queue and remove it.
mono_thread_hazardous_free_or_queue has a fundamentally broken design.
It allows arbitrary free code to run in the context of its caller.
The sync/async split on where it's called is not enough to know whether
we can run free'ing code or not.
Since in sync context we called free functions that could take locks,
it happened that those locks conflicted with the ones already taken.
In particular, mono_jit_info_table_free did take a domain lock and
quite a few of the sync context calls would hold locks that must
not be held when taking a domain lock.
This, is practice, means that we'd need to partition the free calls
into 3 groups: async context, reentrant context (no runtime locks held)
and sync context (maybe some locks held).
There was no case where reentrant context would be usable meaning,
in practice, that all calls happens in what effectively is async context
where free functions can't be called.
The new design is a lot more straightforward:
- No implicit free queue pumping
- A pair of free functions with well defined behavior.
mono_thread_hazardous_try_free - to be used where the caller expects the free function to be called
mono_thread_hazardous_queue_free - to be used where the caller don't expect the free function to be called [1]
- Explicit pumping on places that known to be ok
Thread detach
Finalizer thread
[1] This might sound like a weird condition, but a lot of lock-free code
have compensation logic that trigger free'ing during lookups.
We add a callback to the HP so the GC can monitor the queue size and act on it.
The queue size was picked to keep the overhead limited even under high load.
- Add comments on structures
- Rename 'data' and 'data_end' to 'cursor' and 'buf_end' in
LogBuffer/StatsBuffer as the old names were confusing
- Add new assert when processing samples
- Add a MONO_PROFILER_LIB_DIR from which custom profilers are
dynamically loaded, in case it is not the normal library path
- Modify mono/profiler make check to use MONO_PROFILER_LIB_DIR
(this fixes a bug where it would sometimes load the wrong profiler)
- Add information about profiler loading to mono_trace
We used to log the major heap size before the sweep job finished. Remove the major heap logging at collection end time and add a separate log entry at sweep finish time.
mono_thread_hazardous_free_or_queue has a fundamentally broken design.
It allows arbitrary free code to run in the context of its caller.
The sync/async split on where it's called is not enough to know whether
we can run free'ing code or not.
Since in sync context we called free functions that could take locks,
it happened that those locks conflicted with the ones already taken.
In particular, mono_jit_info_table_free did take a domain lock and
quite a few of the sync context calls would hold locks that must
not be held when taking a domain lock.
This, is practice, means that we'd need to partition the free calls
into 3 groups: async context, reentrant context (no runtime locks held)
and sync context (maybe some locks held).
There was no case where reentrant context would be usable meaning,
in practice, that all calls happens in what effectively is async context
where free functions can't be called.
The new design is a lot more straightforward:
- No implicit free queue pumping
- A pair of free functions with well defined behavior.
mono_thread_hazardous_try_free - to be used where the caller expects the free function to be called
mono_thread_hazardous_queue_free - to be used where the caller don't expect the free function to be called [1]
- Explicit pumping on places that known to be ok
Thread detach
Finalizer thread
[1] This might sound like a weird condition, but a lot of lock-free code
have compensation logic that trigger free'ing during lookups.
[sgen] Clean up thread pool on shutdown.
Keeping threads around can cause processes to keep running when they shouldn't, particularly on Windows when the entry point returns.
(The reason this is important for me is that Wine provides _CorExeMain, which is an entry point that does return, unlike normal compiled C programs which appear to call exit() after main() returns. A Windows process doesn't exit until ALL threads have exited, so a thread that never exits means a hung process.)
It doesn't seem like we have other GC-specific cleanup code, so I don't know if this is a good approach. Feedback on that question would be appreciated.
Those two functions are intended to replace mono_thread_hazardous_free_or_queue.
The problem with that function is that it doesn't compose well given it forces
the whole call chain leader to a free call to follow its semantics.
Additionally, it's not enough safety to be in sync context to call the free functions
as they introduce reentrancy - they can be called from any other arbitrary free
call that doesn't claim to be in async context.
Given most data structures, in general, can't guarantee how they are used, they
must make the conservative assumption of being in async context, thus not allowing
any form of locking happening.
Make AOT compilation on 64 bit windows produce executables
This PR contains three commits (see commit descriptions) which:
- Fix 64-bit debug windows builds in MSVC 2015
- Make it possible to use the tool-prefix aot option with mono/mini make fullaotcheck (necessary if you are in cygwin and wish to invoke `x86_64-w64-mingw32-gcc`)
- Change mini so that `--aot=full` successfully emits 64-bit windows executables.
Building 32 bit executables will generally fail because we do not follow cdecl. The 64 bit executables do not run properly when executed.
[runtime] MonoError-ize mono_loookup_dynamic_token{,_class}
Push `MonoError` through `mono_lookup_dynamic_token_class` and `mono_lookup_dynamic_token`
Also simplify the implementations of those functions so that they call `mono_reflection_lookup_dynamic_token` directly, rather than via a function pointer. The old implementation was a holdover from when the runtime was implemented as separate libraries.
Android uses dlmalloc within bionic. For some reason, our x86 build
links against the libc implementation instead of our own.
This leads us allocating memory that is not executable which made
dynamic methods fail when executing.
List of original contributors:
Rodrigo Kumpera <[email protected]>
On some junk Samsung x86 device, pthread_attr_getstack is completely broken.
If the returned value is not sane, we parse /proc/self/maps to find the right
memory regions for the current stack.
Fixes BXC #21550 and DESK #83333.
List of original contributors:
Rodrigo Kumpera <[email protected]>
1) Free() throws on MS.NET when the handle was already freed, copied and adapted the referencesource implementation.
2) Explicit conversion from IntPtr to GCHandle throws InvalidOperationException when value is IntPtr.Zero on MS.NET, not ArgumentException.
This fixes two failing CoreCLR test cases.
With the concurrent collector, we used to reset cementing at the start of the finishing pause (we can uncement since we process all the remsets when the world is stopped, through the mod union entries). This processing means cardtable scan in the finishing pause. In order to reduce pause time and overhead, we extend cementing for the finishing pause. Now we don't uncement objects (during sgen_cement_reset) that are still pinned in the roots at the start of the concurrent collection. We won't mark mod_union entries for these objects and they will survive the collection in the nursery. They can become uncemented at the start of the next major collection, given that they are no longer pinned in the roots.
Call mono_reflection_lookup_dynamic_token directly from
mono_lookup_dynamic_token.
Delete mono_install_lookup_dynamic_token () and the
MonoLookupDynamicToken typedef.
[runtime] MonoError-ize mono_object_isinst{,_mbyref}
Also mark them external only. Runtime should use mono_object_isinst_mbyref_checked and mono_object_isinst_checked
We are quite frequently seeing an error on the ARM workers on Jenkins:
```
Test Case Failures:
1) MonoTests.System.Net.Sockets.SocketTest.SendAsyncFile : System.Exception : Could not abort registered blocking threads before closing socket.
at System.Net.Sockets.SafeSocketHandle.ReleaseHandle () [0x000be] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/System/System.Net.Sockets/SafeSocketHandle.cs:77
at System.Runtime.InteropServices.SafeHandle.DangerousReleaseInternal (Boolean dispose) <0x42cb0050 + 0x0020b> in <filename unknown>:0
at System.Runtime.InteropServices.SafeHandle.InternalDispose () <0x446ba758 + 0x00023> in <filename unknown>:0
at System.Runtime.InteropServices.SafeHandle.Dispose (Boolean disposing) [0x00000] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/external/referencesource/mscorlib/system/runtime/remoting/callcontext.cs:804
at System.Runtime.InteropServices.SafeHandle.Dispose () [0x00000] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/external/referencesource/mscorlib/system/runtime/remoting/callcontext.cs:795
at System.Net.Sockets.Socket.Dispose (Boolean disposing) [0x00047] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/System/System.Net.Sockets/Socket.cs:3321
at System.Net.Sockets.Socket.Dispose () [0x00000] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/System/System.Net.Sockets/Socket.cs:3327
at System.Net.Sockets.Socket.Close () [0x00007] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/System/System.Net.Sockets/Socket.cs:3256
at MonoTests.System.Net.Sockets.SocketTest.SendAsyncFile () [0x000e7] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/System/Test/System.Net.Sockets/SocketTest.cs:4331
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x0003d] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armhf/mcs/class/corlib/System.Reflection/StrongNameKeyPair.cs:103
```
Let's see if implementing the suggestion from https://github.com/mono/mono/pull/1612/files#r26393224
fixes this. I couldn't reproduce the test failure even on the same ARM machine so this is a bit of
an opportunistic change, but it feels like the more "correct" solution anyway.
I decided to inline AbortRegisteredThreads as at the only place we're calling it we already know
blocking_threads can't be null and acquired the lock.
[threadpool-ms] MonoError-ize
1. Convert icalls that throw `NotImplementedException` to do it via mono_error_set_pending_exception
2. Add MonoError outargs to `mono_threadpool_ms_enqueue_work_item` and `mono_threadpool_ms_begin_invoke`
Return TRUE if pending exception was set, FALSE otherwise.
The idea is that you can write:
if (mono_error_set_pending_exception (error)) {
/* cleanup */
return;
}
Krait cpus don't ignore thumb ITT state in ARM mode (it's unspecified CPU behavior).
The linux kernel then didn't bother resetting that state when landing an ARM signal handler.
The end result was that Krait cpus would skip the first few instructions of the signal handler
and things would explode in the most amazing possible ways.
Patch by Mark Probst <[email protected]>.
Don't raise deep in the marshalling code, just assert.
(Raising means we'd have to convert the code to use MonoError and then
thread it out through all of the marshalling code resulting in a lot of
code churn)
When the concurrent mark ends, we have another concurrent phase where we scan the cardtable trying to clean as many cards as possible. The way we achieve this is by first copying all the mod union cards (for each block/los_obj) to a separate temporary card_table. When scanning we will only scan these cards. Therefore we will first preclean these cards in the actual mod_union card_tables, followed by a full memory barrier (which assures us that, when scanning, we will observe the changes that led to the corresponding card marks) and then by a normal mod_union scan, which can remark some of these cards, without any races with the preclean phase.
This way we avoid duplicating cardtable marking code, making sure we have consistent code.
For example, when scanning los objects in the mod union scan step, we didn't check whether the object is cemented or not, leading to additional unnecessary global remsets for the next nursery collection.
We add a new data structure which contains a bucket of entries, exponentially increasing in sizes. The structure is customizable through a few callbacks.
Setting is_slot_set_func enables us to also lookup empty slots, instead of only adding entries at the end of the list.
Setting set_slot_func enables the use of a customized function for setting the slot. If this function is not set, the slots and array fields will be set directly, therefore the structure won't be thread safe.
When doing the mod union scan, we use the block's cardtable (instead of the global one), which we also cannot prefetch, since that would mean dereferencing the block info.
Runtime should use g_assert and g_assert_not_reached or set a MonoError,
as needed.
Also remove REAL_PRINT_REG dead macros from mini-x86.c and mini-amd64.c
- COFF does not use .local or .size
- COFF does use .def to mark functions and .data to mark data
- The seh_handler functions should not be called on full aot builds (Zoltan says they are unnecessary in full aot, and they attempt to jit)
The executables do not yet run without crashing.
* Support MONO_FULLAOT_ADDITIONAL_ARGS env var for make fullaotcheck, appended to --aot parameters
* To support above, permit "blank" parameters (ie trailing commas on parameter list) to --aot=
* --aot tool-prefix parameter now supported for LD as well as AS
Add new internal 'X509Certificate2Impl' and 'X509ChainImpl' classes similar to
'X509CertificateImpl' in corlib and only initialize them when actually needed.
[SRE] MonoError-ize some icalls
* Cleanup some memory that would leak on failure; improve a few error messages
* Add MonoError to `mono_reflection_call_is_assignable_to` and `fieldbuilder_to_mono_class_field`.
* Update several SRE icalls to follow the pattern:
```c
void
the_icall (args... )
{
MonoError error;
(void) the_real_work_function (args..., &error);
mono_error_set_pending_exception (&error);
}
static gboolean
the_real_work_function (args..., MonoError *error)
{
... /* return TRUE on success, FALSE and set error on failure */ ...
}
```
Do this to:
1. `mono_reflection_register_with_runtime`
2. `mono_reflection_setup_internal_class`
3. `mono_reflection_create_internal_class`
4. `mono_reflection_generic_class_initialize`
5. `mono_reflection_event_builder_get_event_info`
6. `mono_reflection_initialize_generic_parameter`
7. `mono_reflection_create_dynamic_method`
It should not prevent the process from terminating. Fixes
issue where the thread is not shut down if ProjectInstances
are built directly instead of via the build manager.
Make `make fullaotcheck` in mono/mini runnable on Windows
Run with
MONO_EXECUTABLE=/path/to/msvc/mono.exe LIST_SEPARATOR=";"
This assumes you are running the test harness in Cygwin and you built mono with MSVC. Also, the test does not currently succeed.
Being able to run the test is a zeroth step toward making the test pass.
It was the only test in the class that required network access (for looking up xamarin.com in the redirect).
Replacing the redirect target with a second local HttpListener should be more resilient to network/DNS issues.
Changes to "checked build" feature
Here are some changes to checked builds I made while trying to debug some coop gc problems. The changes made are:
- Replace the checked build configure flags with a single --enable-checked-build= flag
- Runtime environment variable required for checked build asserts to run
- Report the thread transition history for more kinds of asserts
- For the `mono_threads_reset_blocking` functions, add an assert that guarantees proper nesting
In addition to this, I have documented the checked build feature as implemented here, see my pull request for the website: https://github.com/mono/website/pull/187
Overall my goals with this patch were
- Make it easier to do rapid-fire testing with the checked builds (runtime switch, default-off)
- Make the checked build implementation more internally consistent (more uniform names etc)
Notice I do make the change that instead of checked build sub-features being disabled with a blacklist, you now must enable them with a whitelist. I think this is an improvement because it makes it easier to just casually keep a checked build around (for one thing I would have the option to ship debug builds to users with the checked build modes included but dormant) but I could be talked out of it if this change turns out to be controversial. The only thing I feel strongly about is that if the configure flag is changed back to a blacklist the environment variable should switch to a blacklist also.
If we accept this change the CI bots will need to adopt the new configure flag and environment variable.
[System.Reflection.Emit] MonoError in mono_reflection_create_runtime_class
Depends on #2745
Bubble MonoError up to `mono_reflection_create_runtime_class`. Use `mono_error_set_pending_exception` instead of `mono_error_raise_exception` And try to release resources on the way out.
1. Don't raise while holding locks.
2. Change remove_instantiations_of_and_ensure_contents (called via
g_hash_table_foreach_remove) to populate a MonoError instead of
throwing. If there are multiple errors, we just stash the first one
in user_data and clean up the rest.
3. Use mono_erro_set_pending_exception instead of
mono_error_raise_exception since it's an icall.
[System.Reflection.Emit] Propagate MonoError through some more static functions
Some externally visible changes include:
* Bubble MonoError up to one more SRE icall: `System.Reflection.Emit.CustomAttributeBuilder.GetBlob()`
* `fix_partial_generic_class` and `ensure_generic_class_runtime_vtable` now expect their callers to set the class failure state which they do under slightly more circumstances now than previously (now: whenever there's an error set from the above functions; before: only when we had trouble initializing the generic type definition.)
* Previous API for `mono_reflection_bind_generic_parameters` didn't make it clear whether NULL was a valid return value or not. Now when we return NULL we always set the `error` out-arg. So non-NULL is success and NULL is failure.
The runtime should use mono_reflection_get_custom_attrs_blob_checked.
The icall is now ves_icall_System_Reflection_Emit_CustomAttributeBuilder_GetBlob.
This commit also changes the behavior of
mono_reflection_bind_generic_parameters slightly: if the passed in class
isn't generic, it sets error and returns NULL. (It wasn't clearly
previously whether NULL was an error condition or not - with this commit
we clarify that a NULL result is an error).
Because mono_msec_ticks would previously return the number of milliseconds since boot time, it would overflow after ~49 days. That would mean that anywhere you would use it, you would need to be careful of arithmetic overflow.
By simply returning a gint64 we will not overflow before ~30k years.
Fixes bug https://bugzilla.xamarin.com/show_bug.cgi?id=38666
Due to our usage of chained commands it'd use the exit code of the last command,
which is not what we want. We use chaining because e.g. in the ms-test-suite
case we still want to run the systemruntimebringup suite even if the conformance
suite had a failing test.
It's not supposed to contain a full path to a directory, but rather a relative path
to a subdirectory of the ApplicationBase. However, this isn't enforced in all cases
by Mono so setting a full path worked when the path doesn't contain a '.' because then
the code in [1] doesn't clear the variable and the path is added to the domain->search_path.
This caused the test to fail on Wrench on the mono-4.4.0 lane because the path contains
a dot while confusingly it worked fine on master.
Fixing this by appending the xbuild_14 path via an alternative (albeit slightly hacky)
method related to the standard MONO_PATH env var. Because the variable is only read
once at app startup we need to call into the runtime to explicitly set the new path
before trying to load the MSBuild 14 assemblies. This is fine since we only
want to test that the correct assembly version is loaded and nothing else.
[1] https://github.com/mono/mono/blob/37b2b9fbc25a2199aba1d794117924d4828360a7/mono/metadata/appdomain.c#L1319-L1337
It's flaky on Jenkins, removing the dependency on an external server and instead using a local HttpListener
to answer the requests should hopefully make it more reliable.
Moved StackTrace.GetFullNameForStackTrace into a new class
StackTraceHelper so the code can be reused by mono-symbolicate.
Reusing GetFullNameForStackTrace in mono-symbolicate allows the tool to
easily match a stack trace line with a method without doing a rather
complicate parsing of types and possible generic parameters
combinations.
This was inadvertently removed in https://github.com/mono/mono/commit/611a43ee0f672adbac3e25dc77731843a3d10cf1 from MulticastDelegate.CombineImpl().
Add the type check back in the Delegate base class, we already do the same in Remove().
Add unit tests to cover the behavior to the corlib test suite. (reverted from commit f29878dc713f4e148fe0a1e703fae8929e6fb6e0)
Needed to update some monodoc tests to match that an exception is now thrown again.
fixed replacement of $mono_libdir in config file
strncpy does not NUL-terminate the destination string in this case so one cannot use strcat to append
This fixes the error "malloc: top chunk is corrupt" as reported on mono-devel-list back in 2015-10-20 (subject: "malloc error executing OBS-built mono") at least for me.
This removed the last source of loader error from the runtime
The last source was on the AOT compiler in load_image.
I hooked enough MonoError to bubble the issue to a reasonably higher layer.
@vargaz please review.
This was an incorrect test. Tasks can't really be used like this
especially this once since it tries to Log an error, but it hasn't been
assigned a BuildEngine yet!
Other fixes in TaskLoggingHelper expose this issue.
Fix msbuild remapping
First commit:
```
Revert "Do not remap framework assembly if it's version is higher than the runtime version"
It would cause issues on mobile, cause the runtime version is 2.0.5.0 there and loading
e.g. System.dll v4.0 would no longer be mapped to that version anymore after this change.
```
---
Second commit:
```
[runtime] Stop remapping higher versions of
Microsoft.Build.Framework/Engine and remap Microsoft.Build.Utilities/Tasks
(.v3.5)
The previous remapping was added in 725ed3f824, but it didn't actually
fix the bug in https://bugzilla.xamarin.com/show_bug.cgi?id=32561.
The underlying cause of the bug is that in Mono 4.0 we removed the 2.0/3.5 profiles.
This meant that Microsoft.Build.Utilities.dll and Microsoft.Build.Utilities.v3.5.dll weren't installed
in the GAC anymore, because MSBuild 4.0 uses Microsoft.Build.Utilities.v4.0.dll, so the app failed
to load the 2.0 version of the assembly. The same applies for the .Tasks variants.
We remap earlier versions of the Microsoft.Build.Utilities/Tasks assemblies to the v4.0 version.
I've introduced another item in the AssemblyVersionMap struct which allows remapping to target a different
assembly name, because MSBuild made the questionable decision to put the version number in the assembly name.
While strictly speaking this is not what .NET is doing (it just fails there if .NET 2.0 isn't installed)
on Mono there's no way to install those older profiles anymore, so we remap them to v4.0 to keep apps working.
Newer versions of Microsoft.Build.Framework/Engine (like 12.0, 14.0) however have the same name, so we need to be
more careful here and only do a remapping to the 4.0 version if it's an earlier version (e.g. 2.0 -> 4.0).
This avoids issues with accidentally remapping 14.0 -> 4.0.
I tested the app from the bug report and it now works fine.
```
The previous remapping was added in 725ed3f824, but it didn't actually
fix the bug in https://bugzilla.xamarin.com/show_bug.cgi?id=32561.
The underlying cause of the bug is that in Mono 4.0 we removed the 2.0/3.5 profiles.
This meant that Microsoft.Build.Utilities.dll and Microsoft.Build.Utilities.v3.5.dll weren't installed
in the GAC anymore, because MSBuild 4.0 uses Microsoft.Build.Utilities.v4.0.dll, so the app failed
to load the 2.0 version of the assembly. The same applies for the .Tasks variants.
We remap earlier versions of the Microsoft.Build.Utilities/Tasks assemblies to the v4.0 version.
I've introduced another item in the AssemblyVersionMap struct which allows remapping to target a different
assembly name, because MSBuild made the questionable decision to put the version number in the assembly name.
While strictly speaking this is not what .NET is doing (it just fails there if .NET 2.0 isn't installed)
on Mono there's no way to install those older profiles anymore, so we remap them to v4.0 to keep apps working.
Newer versions of Microsoft.Build.Framework/Engine (like 12.0, 14.0) however have the same name, so we need to be
more careful here and only do a remapping to the 4.0 version if it's an earlier version (e.g. 2.0 -> 4.0).
This avoids issues with accidentally remapping 14.0 -> 4.0.
I tested the app from the bug report and it now works fine.
Saw a few failures on Jenkins on the slower ARM machines over the last days:
```
) MonoTests.System.Collections.Concurrent.BlockingCollectionTests.AddAnyCancellable : System.OperationCanceledException : The operation was canceled.
at System.Collections.Concurrent.BlockingCollection`1[T].TryAddToAnyCore (System.Collections.Concurrent.BlockingCollection`1[] collections, System.Collections.Concurrent.T item, Int32 millisecondsTimeout, CancellationToken externalCancellationToken) [0x00092] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armel/external/referencesource/System/sys/system/collections/concurrent/BlockingCollection.cs:1041
at System.Collections.Concurrent.BlockingCollection`1[T].TryAddToAny (System.Collections.Concurrent.BlockingCollection`1[] collections, System.Collections.Concurrent.T item, Int32 millisecondsTimeout, CancellationToken cancellationToken) [0x00006] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armel/external/referencesource/System/sys/system/collections/concurrent/BlockingCollection.cs:971
at System.Collections.Concurrent.BlockingCollection`1[T].AddToAny (System.Collections.Concurrent.BlockingCollection`1[] collections, System.Collections.Concurrent.T item, CancellationToken cancellationToken) <0x4421bf18 + 0x0002b> in <filename unknown>:0
at MonoTests.System.Collections.Concurrent.BlockingCollectionTests.AddAnyCancellable () [0x00031] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armel/mcs/class/System/Test/System.Collections.Concurrent/BlockingCollectionTests.cs:276
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x0003d] in /media/ssd/jenkins/workspace/test-mono-mainline/label/debian-armel/mcs/class/corlib/System.Reflection/StrongNameKeyPair.cs:103
```
100ms is likely just too short, bumping it.
[runtime] Fix deadlock while unwinding the stack of suspended thread
A suspended thread, in non-coop case, can be holding runtime locks. When the suspender tries to unwind the stack for this thread, it might require taking of runtime locks (ex. in aot case we might search for the jit info in the aot image and then register it, which requires the domain lock). Mark the suspender thread as running in async context while it unwinds other threads.
In addition to --enable-checked-build, it is now mandatory to put the
requested checked-build modes in the environment variable
MONO_CHECK_MODE at runtime.
Also add a MONO_CHECK_THREAD_TRANSITION_HISTORY environement variable
for thread transition history length (instead of hardcoding 3).
This reverts commit 100bd760a4.
It would cause issues on mobile, cause the runtime version is 2.0.5.0 there and loading e.g. System.dll v4.0 would
no longer be mapped to that version anymore after this change.
Testing for the remap message via grep isn't ideal, a better way to verify the assembly
version would be to check asm.GetName().Version, but unfortunately in the test environment
when MONO_PATH is set the assembly loading always fallsback to a simple file name matching
in the directory so we end up with the wrong (v4.0) assembly in that case.
This was revealed by the CoreCLR tests/src/CoreMangLib/cti/system/convert/converttouint3219.exe test.
When we tried to convert a number larger than UInt32.MaxValue (in this case 4933891728) we would cast
the intermediate result to uint which overflows and makes the end result smaller which means we don't throw.
Storing the intermediate result in a long before checking for the correct range fixes this.
Added a few additional tests that I felt were missing and/or only present for other Convert.* methods.
I found two more cases that don't throw OverflowException but fixing it looked more involved so I punted
and just ignored them with a FIXME for now.
ARM platform tends to try very hard to save power by switching off CPUs. This could lead to inconsistencies in the value returned by mono_cpu_count
Recap from Alexander Köplinger <[email protected]>:
When we merged the change from PR #2722, we started seeing random failures on ARM in the MonoTests.System.Threading.ThreadPoolTests.SetAndGetMaxThreads and MonoTests.System.Threading.ManualResetEventSlimTests.Constructor_Defaults tests. Both of those tests are dealing with Environment.ProcessorCount to verify some implementation details.
It turns out that on the Jetson TK1 board we use on public Jenkins and on ARM kernels in general, the value returned by sched_getaffinity (or _SC_NPROCESSORS_ONLN) doesn't contain CPUs/cores that are powered off for power saving reasons. This is contrary to what happens on x86, where even cores in deep-sleep state are returned [1], [2]. This means that we would get a processor count of 1 at one point in time and a higher value when load increases later on as the system wakes CPUs.
Various runtime pieces like the threadpool and also user code however relies on the value returned by Environment.ProcessorCount e.g. for deciding how many parallel tasks to start, thereby limiting the performance when that code thinks we only have one CPU.
Talking to a few people, this was the reason why we changed to _SC_NPROCESSORS_CONF in https://github.com/mono/mono/pull/1688 and why we added a special case for Android in https://github.com/mono/mono/commit/de3addcde5bf875dcd43d3e2c6536d61871e7675 to get the "real" number of processors in the system.
Because of those issues Android/Dalvik also switched from _ONLN to _SC_NPROCESSORS_CONF for the Java API Runtime.availableProcessors() too [3], citing:
> Traditionally this returned the number currently online,
but many mobile devices are able to take unused cores offline to
save power, so releases newer than Android 4.2 (Jelly Bean) return the maximum number of
cores that could be made available if there were no power or heat
constraints.
The problem with sticking to _SC_NPROCESSORS_CONF however is that it breaks down in constrained environments like Docker or with an explicit CPU affinity set by the Linux `taskset` command, They'd get a higher CPU count than can be used, start more threads etc. which results in unnecessary context switches and overloaded systems. That's why we need to respect sched_getaffinity.
So while in an ideal world we would be able to rely on sched_getaffinity/_SC_NPROCESSORS_ONLN to return the number of theoretically available CPUs regardless of power saving measures everywhere, we can't do this on ARM.
I think the pragmatic solution is the following:
* use sched_getaffinity (+ fallback to _SC_NPROCESSORS_ONLN in case of error) on x86. This ensures we're inline with what OpenJDK [4] and CoreCLR [5] do
* use _SC_NPROCESSORS_CONF exclusively on ARM (I think we could eventually even get rid of the PLATFORM_ANDROID special case)
Thoughts?
Helpful links:
[1] https://sourceware.org/ml/libc-alpha/2013-07/msg00383.html
[2] https://lists.01.org/pipermail/powertop/2012-September/000433.html
[3] https://android.googlesource.com/platform/libcore/+/750dc634e56c58d1d04f6a138734ac2b772900b5%5E1..750dc634e56c58d1d04f6a138734ac2b772900b5/
[4] https://bugs.openjdk.java.net/browse/JDK-6515172
[5] https://github.com/dotnet/coreclr/blob/7058273693db2555f127ce16e6b0c5b40fb04867/src/pal/src/misc/sysinfo.cpp#L148
Do not remap framework assembly if it's version is higher than the ru…
…ntime version
Currently, assemblies like Microsoft.Build.Framework and
Microsoft.Build.Engine get remapped to the current runtime version, at
load time. This means that if an assembly references the above
assemblies with a version like `14.1.0.0`, then that would get remapped
to `4.0.0.0`. This is incorrect behavior and breaks msbuild. Instead,
now we do the remapping only if the requested version is lower than the
runtime version.
A suspended thread, in non-coop case, can be holding runtime locks. When the suspender tries to unwind the stack for this thread, it might require taking of runtime locks (ex. in aot case we might search for the jit info in the aot image and then register it, which requires the domain lock). Mark the suspender thread as running in async context while it unwinds other threads.
Currently, assemblies like Microsoft.Build.Framework and
Microsoft.Build.Engine get remapped to the current runtime version, at
load time. This means that if an assembly references the above
assemblies with a version like `14.1.0.0`, then that would get remapped
to `4.0.0.0`. This is incorrect behavior and breaks msbuild. Instead,
now we do the remapping only if the requested version is lower than the
runtime version.
@akoplinger: This will actually impact xbuild too right now because
we're defaulting to xbuild 14.0 in Mono 4.4 now so we'd see messages
like Mono: The request to load the assembly Microsoft.Build.Framework
v14.0.0.0 was remapped to v4.0.0.0 in the assembly loading log, which
will break in very subtle ways.
A few people told me it's surprising that acceptance-tests checks out repos into <mono repo>/../
and it can cause unwanted changes when a repo with the same name already exists there.
While this structure is used in several internal repos I agree for Mono it's better to keep
everything inside the repo itself.
- Add logfile and syslog capability. For Windows, the latter is simulated by writing to a file. Adding Eventlog support is for a future effort. The choice of logging mode is made via MONO_LOG_DEST environment variable.
- Add timestamps and pid to the trace messages to make them more useful
- Add timestamps to SGEN_LOG
- Related to tracing: when tracing and using something like Valgrind the system may be slowed so much that the sleep abort limit may be exceeded for threads. This fix adds an environment variable lookup of "MONO_SLEEP_ABORT_LIMIT" which is a value greater than 40, which defines the number of milliseconds to wait for threads to complete pending operations. If not set, the valus is 200.
A connect flood will break the async loop and take down the entire HttpListener instance (will stop accepting connections).
To reproduce. Take a HttpListener run say 2 wrk test instances against it (1000 connections each works here). After the run the HttpListener has broken its async loop and will no longer accept any connections after. The reason for this is that it was not previously handling the case that AcceptAsync can return synchronously. In this case event will not be called with args.
Patch handles this case and the above issue is not reproducible with.
In certain circumstances, for example when running under nunit-console, assemblies could be unloaded while the profiler still had a reference to them in order to generate the coverage data. In these cases, the memory referred to by the profiler would be invalid and would crash.
Fix this by incrementing the reference count of the assemblies preventing them from being unloaded while coverage is being collected.
Fixes BXC #39325
Operating systems that use linux kernels before 3.9 do not support
binding multiple socket to the same address and port.
In those systems even if it was possible to set
SocketOptionName.ReuseAddress an exception was thrown on the second
bind.
These changes introduce a SocketException that is thrown when
SocketOptionName.ReuseAddress is set on a system that will fail to bind
multiple times to the same address.
On Windows we saw a failure like the following in mcs tests:
```
cs1589-2.cs... REGRESSION (CORRECT ERROR -> WRONG ERROR MESSAGE)
Exp: Unable to include XML fragment `/foo/bar' of file `there-is-no-such-file'. Could not find file "*PATH*/there-is-no-such-file"
Was: Unable to include XML fragment `/foo/bar' of file `there-is-no-such-file'. Could not find file "C:\j\workspace\z\label\w64\mcs\errors\there-is-no-such-file"
```
Fixing it by replacing the backslash with forward slash before comparing it to the expected value.
* keep a reference to a __ComObject's proxy so it doesn't get garbage
collected
* don't create __ComObjects unnecessarily
* Fix for bug 24974
Change-Id: Ia09237b7f1af996405134c250bbc29220f81f067
Docker uses aufs or overlayfs to mount the root system in a
container. This change fixes Xamarin-31021 so that the drives
show up properly.
This change is released under the MIT license.
Change-Id: I5150b0e82f26e9dbd07bbcbc50e7ca50d856dde8
A kevent() syscall may "fail" with EINTR if the process receives
a signal before the timeout expires and before an event is placed
in the kqueue; in this case, rather than erroring out, the
syscall should simply be retried.
Keeping threads around can cause processes to keep running when they
shouldn't, particularly on Windows when the entry point returns.
This commit licensed as MIT/X11.
When a frame marked with OPCODE 0, it is a continuation frame. This frame does not carry the message type and should be derived from the previous frame.
Without this patch you can't use "WebResource.axd" ressources
in a cluster (each mono instance will get a different link for the same ressource)
Signed-off-by: Etienne CHAMPETIER <[email protected]>
2014-04-01 11:42:09 +02:00
15412 changed files with 3829423 additions and 82458 deletions
This directory contains acceptance tests, handled by optional non git submodule based submodules. Run the tests via "make check-full" (there are also targets for individual test suites).
Acceptance tests
================
The SUBMODULES.json file stores information about the submodules, and make targets are used to check out submodules, check their versions, and update the submodule information.
This directory contains acceptance tests, which are third party test suites and frameworks that are used to validate Mono against a wider range of test cases that go beyond the Mono unit tests that run as part of CI.
By convention, submodules repositories are at the same level as the mono repository.
In order to make checking out those test suites optional we don't use traditional git submodules, but instead clone them on demand when needed. The custom submodule repositories are checked out into the acceptance-tests/external/ directory.
Make targets available:
## Usage
make check-<module> - Checks whenever <module> is checked out and matches the version in the info file.
make reset-<module> - Clones <module>if neccesary and checks out the revision specified in the info file.
make bump-<module> - Updates the revision stored in the info file for <module>.
make bump-current-<module> - Updates the revision stored in the info file for <module> to the current revision.
make commit-bump-<module> - Same as make bump-<module>, but commits the change.
make commit-bump-current-<module> - Same as make bump-current-<module>, but commits the change.
Running all test suites is possible via "make check-full". There are also targets for running individual test suites, see below.
Some of the test suites require an installed Mono (i.e. they don't work with the in-tree build), those will ask you to pass in the PREFIX variable pointing to the installation directory when invoking make. Note that this directory needs to be writable as we overwrite some files there as part of testing.
## Individual test suites and targets
*`make check-ms-test-suite` - Runs tests that were shared with Xamarin, those are not available publically and will be skipped when the repository is not accessible.
*`make check-roslyn` - Runs the Roslyn test suite.
*`make check-coreclr` - Runs the CoreCLR test suite.
*`make coreclr-runtest-coremanglib` - Runs only the CoreMangLib portion of the CoreCLR tests, those tests mostly target the BCL behavior.
*`make coreclr-runtest-basic` - Runs only the CoreCLR tests that target runtime behavior and stability.
*`make coreclr-compile-tests` - Convenience target that precompiles all the test cases in parallel.
*`make coreclr-gcstress` - Runs the CoreCLR GC stress tests.
## Updating submodules
The SUBMODULES.json file stores information about the submodules, and make targets are used to check out submodules, check their versions, and update the submodule information:
*`make validate-<module>` - Checks whenever `<module>` is checked out and matches the version in the info file.
*`make reset-<module>` - Clones `<module>` if neccesary and checks out the revision specified in the info file.
*`make bump-<module>` - Updates the revision stored in the info file for `<module>`.
*`make bump-current-<module>` - Updates the revision stored in the info file for `<module>` to the current revision.
*`make commit-bump-<module>` - Same as `make bump-<module>`, but commits the change.
*`make commit-bump-current-<module>` - Same as `make bump-current-<module>`, but commits the change.
Example: when making a change in the CoreCLR submodule (like disabling something on Mono), you'd commit the change there and then run `make bump-current-coreclr` or `make commit-bump-current-coreclr` to update the version in SUBMODULES.json.
# Set the build profiles and options before things which use them
#
AC_ARG_WITH(profile4_x, [ --with-profile4=yes,no If you want to install the 4.x FX (defaults to yes)], [], [with_profile4_x=default])
AC_ARG_WITH(monodroid, [ --with-monodroid=yes,no If you want to build the MonoDroid assemblies (defaults to no)], [], [with_monodroid=default])
AC_ARG_WITH(monotouch, [ --with-monotouch=yes,no If you want to build the Xamarin.iOS assemblies (defaults to no)], [], [with_monotouch=default])
AC_ARG_WITH(monotouch_watch, [ --with-monotouch_watch=yes,no If you want to build the Xamarin.WatchOS assemblies (defaults to no)],[], [with_monotouch_watch=default])
AC_ARG_WITH(monotouch_tv, [ --with-monotouch_tv=yes,no If you want to build the Xamarin.TVOS assemblies (defaults to no)], [], [with_monotouch_tv=default])
AC_ARG_WITH(bitcode, [ --with-bitcode=yes,no If bitcode is enabled (defaults to no)], [], [with_bitcode=default])
AC_ARG_WITH(xammac, [ --with-xammac=yes,no If you want to build the Xamarin.Mac assemblies (defaults to no)], [], [with_xammac=default])
AC_ARG_WITH(mobile_static, [ --with-mobile_static=yes,no If you want to build the mobile_static assemblies (defaults to no)], [], [with_mobile_static=default])
AC_ARG_WITH(runtime_preset, [ --with-runtime_preset=net_4_x,all,mobile_static,bitcode_mobile_static Which default profile to build (defaults to net_4_x)], [], [with_runtime_preset=net_4_x])
AC_ARG_WITH(large-heap, [ --with-large-heap=yes,no Enable support for GC heaps larger than 3GB (defaults to no)], [large_heap=$withval], [large_heap=no])
AC_ARG_WITH(large-heap, [ --with-large-heap=yes,no Enable support for GC heaps larger than 3GB (defaults to no)], [large_heap=$withval], [large_heap=no])
if test "x$large_heap" = "xyes"; then
CPPFLAGS="$CPPFLAGS -DLARGE_CONFIG"
fi
AC_SUBST(LIBGC_CPPFLAGS)
AC_SUBST(LIBGC_LIBS)
AC_SUBST(LIBGC_STATIC_LIBS)
AC_SUBST(libgc_dir)
AC_SUBST(BOEHM_DEFINES)
dnl
dnl End of Boehm GC Configuration
dnl
@@ -1083,6 +1290,7 @@ if test x$host_win32 = xno; then
dnl hires monotonic clock support
AC_SEARCH_LIBS(clock_gettime, rt)
AC_CHECK_FUNCS(clock_nanosleep)
dnl dynamic loader support
AC_CHECK_FUNC(dlopen, DL_LIB="",
@@ -2324,6 +2532,9 @@ else
#include <winsock2.h>
#include <ws2tcpip.h>
], [
#ifndef inet_pton
(void) inet_pton;
#endif
inet_pton (0, NULL, NULL);
], [
# Yes, we have it...
@@ -2456,7 +2667,7 @@ fi
AC_ARG_ENABLE(bcl-opt, [ --disable-bcl-opt BCL is compiled with no optimizations (allows accurate BCL debugging)], test_bcl_opt=$enableval, test_bcl_opt=yes)
AC_ARG_ENABLE(perf-events, [ --enable-perf-events Enable using `perf` for profiling on Linux], test_perf_events=$enableval, test_perf_events=no)
if test "x$test_perf_events" == "xyes"; then
if test "x$test_perf_events" = "xyes"; then
AC_DEFINE(ENABLE_PERF_EVENTS, 1, [Enable using `perf` for profiling on Linux])
AC_SUBST(ENABLE_PERF_EVENTS)
fi
@@ -2554,9 +2765,6 @@ if test "x$enable_nacl_codegen" = "xyes"; then
MONO_NACL_ALIGN_MASK_OFF=1
AC_DEFINE(TARGET_NACL, 1, [...])
AC_DEFINE(__native_client_codegen__, 1, [...])
else
MONO_NACL_ALIGN_MASK_OFF=0
AC_DEFINE(__default_codegen__, 1, [...])
fi
if test "x$enable_nacl_gc" = "xyes"; then
if test "x$TARGET" = "xAMD64" -o "x$TARGET" = "xX86"; then
@@ -2580,13 +2788,17 @@ dnl **************
dnl *** LLVM ***
dnl **************
AC_ARG_ENABLE(llvm,[ --enable-llvm Enable the LLVM back-end], enable_llvm=$enableval, enable_llvm=no)
AC_ARG_ENABLE(llvm,[ --enable-llvm Enable the LLVM back-end], enable_llvm=$enableval, enable_llvm=default)
AC_ARG_ENABLE(llvm-version-check,[ --enable-llvm-version-check Check that the LLVM matches the version expected by mono], enable_llvm_version_check=$enableval, enable_llvm_version_check=no)
AC_ARG_ENABLE(llvm-runtime,[ --enable-llvm-runtime Enable runtime support for llvmonly code], enable_llvm_runtime=$enableval, enable_llvm_runtime=no)
AC_ARG_WITH(llvm, [ --with-llvm=<llvm prefix> Enable the LLVM back-end], enable_llvm=yes,)
if test "x$enable_llvm" = "xdefault"; then
enable_llvm=$enable_llvm_default
fi
if test "x$enable_llvm" = "xyes"; then
if test "x$with_llvm" != "x"; then
LLVM_CONFIG=$with_llvm/bin/llvm-config
@@ -2618,7 +2830,7 @@ if test "x$enable_llvm" = "xyes"; then
AC_MSG_CHECKING(LLVM version)
AC_MSG_RESULT($llvm_version $llvm_api_version)
if echo $llvm_version | grep -q 'mono'; then
if test "x$enable_llvm_version_check" == "xyes"; then
if test "x$enable_llvm_version_check" = "xyes"; then
if test "$llvm_version" != "$expected_llvm_version"; then
AC_MSG_ERROR([Expected llvm version $expected_llvm_version, but llvm-config --version returned $llvm_version"])
fi
@@ -2643,20 +2855,17 @@ if test "x$enable_llvm" = "xyes"; then
if test x$with_sgen_default_concurrent != xno; then
AC_DEFINE(HAVE_CONC_GC_AS_DEFAULT, 1, [Defaults to concurrent GC])
conc_gc_msg=" (concurrent by default)"
fi
if test "x$gc_msg" = "x"; then
gc_msg="sgen$conc_gc_msg"
else
gc_msg="sgen$conc_gc_msg and $gc_msg"
fi
fi
AC_SUBST(SGEN_DEFINES)
AM_CONDITIONAL(SUPPORT_SGEN, test x$buildsgen = xyes)
@@ -3234,8 +3514,10 @@ case "$host" in
GTKX11="libgtk-x11-2.0.dylib"
;;
*-*-*netbsd*)
LIBC="libc.so.12"
INTL="libintl.so.0"
LIBC="libc.so"
INTL="libintl.so"
SQLITE="libsqlite.so"
SQLITE3="libsqlite3.so"
;;
*-*-kfreebsd*-gnu)
LIBC="libc.so.0.1"
@@ -3283,6 +3565,12 @@ AC_ARG_WITH([libgdiplus],
# default install location
libgdiplus_install_loc=libgdiplus${libsuffix}
case "$host" in
*-*-*linux*)
libgdiplus_install_loc=libgdiplus${libsuffix}.0
;;
esac
case $with_libgdiplus in
no|installed)
libgdiplus_loc=
@@ -3391,6 +3679,10 @@ if test ${TARGET} = ARM; then
])
fi
if test x$arm_fpu != x; then
fpu=$arm_fpu
fi
AC_MSG_RESULT($fpu)
CPPFLAGS="$CPPFLAGS -DARM_FPU_$fpu=1"
unset fpu
@@ -3454,12 +3746,6 @@ if test ${TARGET} = ARM; then
fi
fi
if test ${TARGET} = ARM; then
if test "x${with_jumptables}" = "xyes"; then
AC_DEFINE(USE_JUMP_TABLES, 1, Use jump tables in JIT)
fi
fi
if test ${TARGET} = unknown; then
CPPFLAGS="$CPPFLAGS -DNO_PORT"
AC_MSG_WARN("mono has not been ported to $host: some things may not work.")
@@ -3493,29 +3779,6 @@ case "x$libgc" in
;;
esac
AC_ARG_WITH(profile4_x, [ --with-profile4=yes,no If you want to install the 4.6 FX (defaults to yes)], [], [with_profile4_x=yes])
AC_ARG_WITH(monodroid, [ --with-monodroid=yes,no If you want to build the MonoDroid assemblies (defaults to no)], [], [with_monodroid=no])
AC_ARG_WITH(monotouch, [ --with-monotouch=yes,no If you want to build the Xamarin.iOS assemblies (defaults to no)], [], [with_monotouch=no])
AC_ARG_WITH(monotouch_watch, [ --with-monotouch_watch=yes,no If you want to build the Xamarin.WatchOS assemblies (defaults to no)],[], [with_monotouch_watch=no])
AC_ARG_WITH(monotouch_tv, [ --with-monotouch_tv=yes,no If you want to build the Xamarin.TVOS assemblies (defaults to no)], [], [with_monotouch_tv=no])
AC_ARG_WITH(bitcode, [ --with-bitcode=yes,no If bitcode is enabled (defaults to no)], [], [with_bitcode=no])
AC_ARG_WITH(xammac, [ --with-xammac=yes,no If you want to build the Xamarin.Mac assemblies (defaults to no)], [], [with_xammac=no])
AC_ARG_WITH(mobile_static, [ --with-mobile_static=yes,no If you want to build the mobile_static assemblies (defaults to no)], [], [with_mobile_static=no])
OPROFILE=no
AC_ARG_WITH(oprofile,[ --with-oprofile=no,<oprofile install dir> Enable oprofile support (defaults to no)],[
if test x$with_oprofile != xno; then
oprofile_include=$with_oprofile/include
if test ! -f $oprofile_include/opagent.h; then
AC_MSG_ERROR([oprofile include file not found at $oprofile_include/opagent.h])
AC_ARG_WITH(malloc_mempools,[ --with-malloc-mempools=yes,no Use malloc for each single mempool allocation (only for runtime debugging, defaults to no)],[
if test x$with_malloc_mempools = xyes; then
@@ -3525,15 +3788,18 @@ AC_ARG_WITH(malloc_mempools,[ --with-malloc-mempools=yes,no Use malloc for eac
])
DISABLE_MCS_DOCS=no
DISABLE_MCS_DOCS=default
AC_ARG_WITH(mcs_docs,[ --with-mcs-docs=yes,no If you want to build the documentation under mcs (defaults to yes)],[
if test x$with_mcs_docs != xyes; then
DISABLE_MCS_DOCS=yes
fi
])
if test x$with_profile4_x != xyes; then
if test -n "$INSTALL_4_x_TRUE"; then :
DISABLE_MCS_DOCS=yes
fi
if test "x$DISABLE_MCS_DOCS" = "xdefault"; then
DISABLE_MCS_DOCS=$DISABLE_MCS_DOCS_default
fi
AC_ARG_WITH(lazy_gc_thread_creation, [ --with-lazy-gc-thread-creation=yes|no Enable lazy runtime thread creation, embedding host must do it explicitly (defaults to no)],[
if test x$with_lazy_gc_thread_creation != xno ; then
AC_ARG_ENABLE(checked_build_test, [ --enable-checked-build-test=LIST drop support for LIST checked build tests. LIST is a comma-separated list from: gc, metadata, thread.],
[
for feature in `echo "$enable_checked_build_test" | sed -e "s/,/ /g"`; do
AC_ARG_ENABLE(checked_build, [ --enable-checked-build=LIST To enable checked build (expensive asserts), configure with a comma-separated LIST of checked build modules and then include that same list in the environment variable MONO_CHECK_MODE at runtime. Recognized checked build modules: all, gc, metadata, thread],[
This license governs use of the accompanying software. If you use the software, you accept this license. If you do not accept the license, do not use the software.
1. Definitions
The terms “reproduce,” “reproduction,” “derivative works,” and “distribution” have the same meaning here as under U.S. copyright law.
A “contribution” is the original software, or any additions or changes to the software.
A “contributor” is any person that distributes its contribution under this license.
“Licensed patents” are a contributor’s patent claims that read directly on its contribution.
2. Grant of Rights
(A) Copyright Grant- Subject to the terms of this license, including the license conditions and limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free copyright license to reproduce its contribution, prepare derivative works of its contribution, and distribute its contribution or any derivative works that you create.
(B) Patent Grant- Subject to the terms of this license, including the license conditions and limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free license under its licensed patents to make, have made, use, sell, offer for sale, import, and/or otherwise dispose of its contribution in the software or derivative works of the contribution in the software.
3. Conditions and Limitations
(A) No Trademark License- This license does not grant you rights to use any contributors’ name, logo, or trademarks.
(B) If you bring a patent claim against any contributor over patents that you claim are infringed by the software, your patent license from such contributor to the software ends automatically.
(C) If you distribute any portion of the software, you must retain all copyright, patent, trademark, and attribution notices that are present in the software.
(D) If you distribute any portion of the software in source code form, you may do so only under this license by including a complete copy of this license with your distribution. If you distribute any portion of the software in compiled or object code form, you may only do so under a license that complies with this license.
(E) The software is licensed “as-is.” You bear the risk of using it. The contributors give no express warranties, guarantees or conditions. You may have additional consumer rights under your local laws which this license cannot change. To the extent permitted under your local laws, the contributors exclude the implied warranties of merchantability, fitness for a particular purpose and non-infringement.
(F) If you distribute the software or derivative works with programs you develop, you agree to indemnify, defend, and hold harmless all contributors from any claims, including attorneys’ fees, related to the distribution or use of your programs. For clarity, you have no such obligations to a contributor for any claims based solely on the unmodified contributions of that contributor.
(G) If you make any additions or changes to the original software, you may only distribute them under a new namespace. In addition, you will clearly identify your changes or additions as your own.
Loaded 100 of 15412 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.