We have several issues (e.g. https://github.com/mono/mono/issues/14181) where the installer occasionally fails in the postinstall script for unknown causes, on some hosts.
This seems to be sometimes the culpable section and this patch should help trace the issue or alleviate the common symptoms of it (see https://github.com/mono/mono/issues/14181)
[2018-10] [arm64] Correct exception filter stack frame size
Fixes: https://github.com/mono/mono/issues/14170
Fixes: https://github.com/xamarin/xamarin-android/issues/3112
The `call_filter()` function generated by `mono_arch_get_call_filter()`
was overwriting a part of the previous stack frame because it was not
creating a large enough new stack frame for itself. This had been
working by luck before the switch to building the runtime with Android
NDK r19.
I used a local build of [xamarin/xamarin-android/d16-1@87a80b][0] to
verify that this change resolved both of the issues linked above. I
also confirmed that I was able to reintroduce the issues in my local
environment by removing the change and rebuilding.
After this change, the generated `call_filter()` function now starts by
reserving sufficient space on the stack to hold a 64-bit value at the
`ctx_offset` location. The 64-bit `ctx` value is saved to the
`ctx_offset` location (offset 344 in the new stack frame) shortly
afterwards:
stp x29, x30, [sp,#-352]!
mov x29, sp
str x0, [x29,#344]
As expected, the invocation of `call_filter()` now no longer modifies
the top of the previous stack frame.
Top of the stack before `call_filter()`:
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0x2724b700 0x00000000
0x7fcd2774b0: 0x1ee19ff0 0x00000071 0x0cc00300 0x00000071
Top of the stack after `call_filter()` (unchanged):
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0x2724b700 0x00000000
0x7fcd2774b0: 0x1ee19ff0 0x00000071 0x0cc00300 0x00000071
<details>
<summary>Additional background information</summary>
### The original lucky, "good" behavior for [mono/mono/2018-08@725ba2a built with Android NDK r14][1]
1. The `resume` parameter for `mono_handle_exception_internal()` is
held in register `w23`.
2. That register is saved into the current stack frame at offset 20 by
a `str` instruction:
0x00000000000bc1bc <+3012>: str w23, [sp,#20]
3. `handle_exception_first_pass()` invokes `call_filter()` via a `blr`
instruction:
2279 filtered = call_filter (ctx, ei->data.filter);
0x00000000000bc60c <+4116>: add x9, x22, x24, lsl #6
0x00000000000bc610 <+4120>: ldr x8, [x8,#3120]
0x00000000000bc614 <+4124>: ldr x1, [x9,#112]
0x00000000000bc618 <+4128>: add x0, sp, #0x110
0x00000000000bc61c <+4132>: blr x8
Before the `blr` instruction, the top of the stack looks like this:
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0x0a8b31d8 0x00000071
0x7fcd2774b0: 0x00000000 0x00000000 0x1ef51980 0x00000071
4. `call_filter()` runs. This function is generated by
`mono_arch_get_call_filter()` and starts with:
stp x29, x30, [sp,#-336]!
mov x29, sp
str x0, [x29,#344]
Note in particular how the first line subtracts 336 from `sp` to
start a new stack frame, but the third line writes to a position
that is 344 bytes beyond that, back within the *previous* stack
frame.
5. After the invocations of `call_filter()` and
`handle_exception_first_pass()`, `w23` is restored from the stack:
0x00000000000bc820 <+4648>: ldr w23, [sp,#20]
At this step, the top of the stack looks like this:
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0xcd2775b0 0x0000007f
0x7fcd2774b0: 0x00000000 0x00000000 0x1ef51980 0x00000071
Notice how `call_filter()` has overwritten bytes 8 through 15 of the
stack frame. In this original lucky scenario, this does not affect
the value restored into register `w23` because that value starts at
byte 20.
6. `mono_handle_exception_internal()` tests the value of `w23` to
decide how to set the `ji` local variable:
2574 if (resume) {
0x00000000000bb960 <+872>: cbz w23, 0xbb9c4 <mono_handle_exception_internal+972>
Since `w23` is `0`, `mono_handle_exception_internal()` correctly
continues into the `else` branch.
### The bad behavior for [mono/mono/2018-08@725ba2a built with Android NDK r19][2] works slightly differently
1. As before, the local `resume` parameter starts in register `w23`.
2. This time, the register is saved into the stack frame at offset 12
(instead of 20):
0x00000000000bed7c <+3200>: str w23, [sp,#12]
3. As before, `handle_exception_first_pass()` invokes `call_filter()`
via a `blr` instruction.
At this step, the top of the stack looks like this:
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0x2724b700 0x00000000
0x7fcd2774b0: 0x1ee19ff0 0x00000071 0x0cc00300 0x00000071
4. `call_filter()` runs as before. And the first few instructions of
that function are the same as before:
stp x29, x30, [sp,#-336]!
mov x29, sp
str x0, [x29,#344]
5. `w23` is again restored from the stack, but this time from offset 12:
0x00000000000bf2c0 <+4548>: ldr w23, [sp,#12]
The problem is that `call_filter()` has again overwritten bytes 8
through 15 of the stack frame:
(gdb) x/8x $sp
0x7fcd2774a0: 0x7144d250 0x00000000 0xcd2775b0 0x0000007f
0x7fcd2774b0: 0x1ee19ff0 0x00000071 0x0cc00300 0x00000071
So after the `ldr` instruction, `w23` has an incorrect value of
`0x7f` rather than the correct value `0`.
6. As before, `mono_handle_exception_internal()` tests the value of `w23` to
decide how to set the `ji` local variable:
2574 if (resume) {
0x00000000000be430 <+820>: cbz w23, 0xbe834 <mono_handle_exception_internal+1848>
But this time because `w23` is *not* zero, execution continues
*incorrectly* into the `if` branch rather than the `else` branch.
The result is that `ji` is set to `0` rather than a valid
`(MonoJitInfo *)` value. This incorrect value for `ji` leads to a
null pointer dereference, as seen in the bug reports.
[0]: https://github.com/xamarin/xamarin-android/tree/xamarin-android-9.3.0.22
[1]: https://jenkins.xamarin.com/view/Xamarin.Android/job/xamarin-android-freestyle/1432/Azure/
[2]: https://jenkins.xamarin.com/view/Xamarin.Android/job/xamarin-android-freestyle/1436/Azure/
</details>
Backport of #14757.
/cc @lambdageek @brendanzagaeski
* Bump msbuild to track mono-2018-10
* [msbuild] Bump to update-msbuild-16 branch HEAD
.. and track the build command line changes.
(cherry picked from commit 7100368ddb5821851e6ef19d262c64b0520fdf5d)
* [msbuild] Install msbuild bits in to Current instead of 15.0
This is to prepare for the update to msbuild which expects
`lib/mono/{xbuild,msbuild}/Current`
Except for Roslyn which still installs and expects to be in
`lib/mono/msbuild/15.0/bin/Roslyn`
.. but we install it to `Current` here and create the symlink for it at
msbuild installation time. This allows us to have consistent symlinks:
15.0 -> Current
Note: That *Current* is the new ToolsVersion, it isn't meant to just
point to the current *version*.
(cherry picked from commit cc23e2fc242ac5ed55ad3caab3fba91603e14af8)
(cherry picked from commit 001f8bf0fc48f66354489fc55b5d258a2dd02e17)
* [msbuild] fsharp: Install msbuild files for 16.0
(cherry picked from commit dbfedcf430968eb4a92cafad2a7ea89f723dfde3)
(cherry picked from commit 45ee5e3b04b01350df7524f48afce3a1cc1fa592)
* nuget-hash-extractor: Add msbuild extensions nuget version from
.. xplat-master msbuild branch.
Microsoft.NET.Build.Extensions : 2.1.600-preview-63821-02
Version from:
https://github.com/dotnet/cli/blob/4b9d6502f8061db4a56b730d3d4e65262c72ad5c/build/DependencyVersions.props
None of the assemblies were newer, so none of the lists have any
changes.
(cherry picked from commit 6ce599387ef3ecd9b5954d9282a275fbeacc7aaf)
(cherry picked from commit 32de708d9dd11b6fedb2f9ef38e78b6dab166683)
* Bump bockbuild to pick up a fix for msbuild update.
* [msbuild] Bump to pick an update for NuGetSdkResolver
When a static method is called the obj is not used, so it can be null and it doesn't need to be boxed.
Adding an assert in the method to prevent other crash in this method if a NULL is received.
Fixes#13969
Backport of #14018.
/cc @lambdageek @thaystg
* [profiler] Do not print that many new lines (#13060)
The `mono_profiler_printf` already adds `\n` char, so we don't need to
add them in most cases.
Before the fix the output of aot profiler with verbose enabled looked
like:
02-19 10:50:02.877 22795 22815 I mono-prof: System.OutOfMemoryException:.ctor (string) 2
02-19 10:50:02.877 22795 22815 I mono-prof:
02-19 10:50:02.877 22795 22815 I mono-prof: System.SystemException:.ctor (string) 4
02-19 10:50:02.877 22795 22815 I mono-prof:
02-19 10:50:02.877 22795 22815 I mono-prof: System.Exception:.ctor (string) 6
02-19 10:50:02.877 22795 22815 I mono-prof:
02-19 10:50:02.877 22795 22815 I mono-prof: System.Exception:.cctor () 7
02-19 10:50:02.877 22795 22815 I mono-prof:
...
The `usage ()`'s output should now look similar to other profilers
usage output.
* [profiler] Add duration=NUM parameter to AOT profiler (#13688)
* [profiler] Add duration=NUM parameter to AOT profiler
It instructs the AOT profiler to write the data after NUM seconds
measured from runtime initialization.
* [profilers] Added aot:duration=NUM parameter description
The thread_stopped profiler event can be raised by the thread_info_key_dtor tls
key destructor when the thread is already doesn't have a domain set. In that
case, don't call process_profiler_event since it cannot handle a thread with
null TLS values.
Addresses https://github.com/xamarin/xamarin-android/issues/2920
with the following stack trace
```
* thread #20, name = 'Filter', stop reason = signal SIGSEGV: invalid address (fault address: 0xbc)
* frame #0: libmonosgen-2.0.so`mono_class_vtable_checked(domain=0x0000000000000000, klass=0x0000007200230648, error=0x00000071e92f9178) at object.c:1890
frame #1: libmonosgen-2.0.so`get_current_thread_ptr_for_domain(domain=0x0000000000000000, thread=0x00000071ebfec508) at threads.c:595
frame #2: libmonosgen-2.0.so`mono_thread_current at threads.c:1939
frame #3: libmonosgen-2.0.so`process_event(event=<unavailable>, arg=<unavailable>, il_offset=<unavailable>, ctx=<unavailable>, events=<unavailable>, suspend_policy=<unavailable>) at debugger-agent.c:3715
frame #4: libmonosgen-2.0.so`thread_end [inlined] process_profiler_event(event=EVENT_KIND_THREAD_DEATH, arg=0x00000071ebfec508) at debugger-agent.c:3875
frame #5: libmonosgen-2.0.so`thread_end(prof=<unavailable>, tid=<unavailable>) at debugger-agent.c:3991
frame #6: libmonosgen-2.0.so`mono_profiler_raise_thread_stopped(tid=<unavailable>) at profiler-events.h:105
frame #7: libmonosgen-2.0.so`mono_thread_detach_internal(thread=<unavailable>) at threads.c:979
frame #8: libmonosgen-2.0.so`thread_detach(info=0x00000071e949a000) at threads.c:3215
frame #9: libmonosgen-2.0.so`unregister_thread(arg=<unavailable>) at mono-threads.c:544
frame #10: libmonosgen-2.0.so`thread_info_key_dtor(arg=0x00000071e949a000) at mono-threads.c:774
frame #11: 0x00000072899c58e8 libc.so`pthread_key_clean_all() + 124
frame #12: 0x00000072899c5374 libc.so`pthread_exit + 76
frame #13: 0x00000072899c5264 libc.so`__pthread_start(void*) + 44
frame #14: 0x000000728996617c libc.so`__start_thread + 72
```
It contained DllImports to some Windows APIs which causes issues on xamarin-macios which expects all pinvokes to exist.
Turns out we don't even need that file.
(cherry picked from commit 3903a50e43)
1. it doesn't touch the managed runtime
2. it may be called (arguably it ought to be called only) before the runtime is
initialized (and in particular before the current thread is attached).
Concurrent request completions could cause following exception:
FATAL UNHANDLED EXCEPTION: System.ArgumentOutOfRangeException:
Index was out of range. Must be non-negative and less than
the size of the collection.
Parameter name: index
at System.Collections.Generic.List`1[T].RemoveAt (System.Int32 index) [0x00009] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Collections.Generic.List`1[T].Remove (T item) [0x0000c] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.ServiceModel.Channels.HttpRequestChannel+HttpChannelRequestAsyncResult.Cleanup () [0x00011] in <28c4695205ef47378f5370502b066592>:0
at System.ServiceModel.Channels.HttpRequestChannel+HttpChannelRequestAsyncResult.set_IsCompleted (System.Boolean value) [0x00034] in <28c4695205ef47378f5370502b066592>:0
at System.ServiceModel.Channels.HttpRequestChannel+HttpChannelRequestAsyncResult.Complete (System.Exception ex) [0x0001a] in <28c4695205ef47378f5370502b066592>:0
at System.ServiceModel.Channels.HttpRequestChannel+<>c__DisplayClass7_1.<BeginProcessRequest>b__0 (System.IAsyncResult r) [0x000bd] in <28c4695205ef47378f5370502b066592>:0
This stack was captured after some changes in AwaitTaskContinuation.RunOrScheduleAction.
Unfortunately the current implementation of AwaitTaskContinuation.RunOrScheduleAction re-throws the above
exception with a wrong stack:
at System.Threading.Tasks.AwaitTaskContinuation.RunOrScheduleAction (System.Action action, System.Boolean allowInlining, System.Threading.Tasks.Task& currentTask) [0x00023] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.FinishContinuations () [0x00052] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.FinishStageThree () [0x0003c] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.FinishStageTwo () [0x000a1] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.Finish (System.Boolean bUserDelegateExecuted) [0x00003] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.TrySetException (System.Object exceptionObject) [0x00023] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1[TResult].SetException (System.Exception exception) [0x00029] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Net.HttpWebRequest+<RunWithTimeoutWorker>d__241`1[T].MoveNext () [0x000e0] in <3e9b3e26c4694baab3f689687ad40612>:0
at System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.InvokeMoveNext (System.Object stateMachine) [0x00000] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, System.Boolean preserveSyncCtx) [0x00071] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, System.Boolean preserveSyncCtx) [0x00000] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.Run () [0x00024] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.AwaitTaskContinuation.RunOrScheduleAction (System.Action action, System.Boolean allowInlining, System.Threading.Tasks.Task& currentTask) [0x00023] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.FinishContinuations () [0x00052] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task.FinishStageThree () [0x0003c] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Threading.Tasks.Task`1[TResult].TrySetResult (TResult result) [0x0004f] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1[TResult].SetResult (TResult result) [0x0003d] in <4a8a0eaa024f41829d3435c07e5c7edb>:0
at System.Net.ServicePointScheduler+<WaitAsync>d__45.MoveNext () [0x000f7] in <3e9b3e26c4694baab3f689687ad40612>:0
at System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.InvokeMoveNext (System.Object stateMachine) [0x00000] in <4a8a0
On an Android Xamarin installation this causes an app crash. Since no user code is active the exception cannot be caught.
Backport of #13304.
[2018-10] Revert "[mini] Inline Selector.GetHandle for tvOS and watchOS assemblies as well. (#13246)"
This reverts commit c99fe4b462.
It doesn't work when LLVM is enabled for tvOS: https://github.com/xamarin/xamarin-macios/pull/5742#issuecomment-471007078, it causes multiple compilation errors like this:
Process exited with code 1, command:
/Applications/Xcode101.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang -isysroot /Applications/Xcode101.app/Contents/Developer/Platforms/AppleTVOS.platform/Developer/SDKs/AppleTVOS12.1.sdk -Qunused-arguments -mtvos-version-min=12.1 -fembed-bitcode-marker -arch arm64 -c -o /private/var/folders/nh/n1y9qj2n40d7wpmx1mg9blg80000gn/T/mtouch.cache/arpl1vgs.js6/arm64/Xamarin.TVOS.dll-llvm.o -x assembler /private/var/folders/nh/n1y9qj2n40d7wpmx1mg9blg80000gn/T/mtouch.cache/arpl1vgs.js6/arm64/Xamarin.TVOS.dll-llvm.s
/private/var/folders/nh/n1y9qj2n40d7wpmx1mg9blg80000gn/T/mtouch.cache/arpl1vgs.js6/arm64/Xamarin.TVOS.dll-llvm.s:4665:14: error: invalid variant 'OBJC_SELECTOR_REFERENCES_.2@PAGE'
adrp x8, l_@OBJC_SELECTOR_REFERENCES_.2@PAGE
^
/private/var/folders/nh/n1y9qj2n40d7wpmx1mg9blg80000gn/T/mtouch.cache/arpl1vgs.js6/arm64/Xamarin.TVOS.dll-llvm.s:4673:18: error: invalid variant 'OBJC_SELECTOR_REFERENCES_.2@PAGEOFF'
ldr x1, [x8, l_@OBJC_SELECTOR_REFERENCES_.2@PAGEOFF]
<!--
Thank you for your Pull Request!
If you are new to contributing to Mono, please try to do your best at conforming to our coding guidelines http://www.mono-project.com/community/contributing/coding-guidelines/ but don't worry if you get something wrong. One of the project members will help you to get things landed.
Does your pull request fix any of the existing issues? Please use the following format: Fixes #issue-number
-->
Backport of #13418.
/cc @lambdageek @rolfbjarne
* [debugger] Fixing two crashes while debugging an Android app.
-> Doing stepping into in VSM in some situation the frame saved in TLS is not synchronised with what is really been executed in the main thread. This makes the debugger-agent crashes because it tries to get variable info in some memory that is not available anymore.
-> To fix it I forced the update of stack when CMD_THREAD_GET_FRAME_INFO is called.
-> Doing step over in Visual Studio for Windows, if you have the threads debugger window enabled, VSW calls frame_commands for each thread that is showed, and if the thread is not really_suspended it tries to get variable info from a memory that is not available anymore because the thread is not suspended yet.
-> To fix it I don't send variable info of a frame if the thread is not really_suspended and doesn't have an async_state valid.
#Fixes 12843
- sys/sysctl.h isn't available on Alpine and not needed by the code,
guard it using HAVE_SYS_SYSCTL_H like elsewhere. Added by https://github.com/mono/mono/pull/11855
(cherry picked from commit 0d7ce1f767)
* [configure.ac] Fix configure checks for Mono.Native
When the configure checks were ported from configure.cmake in corefx
a couple of mistakes happened:
- Using AC_TRY_COMPILE instead of AC_TRY_LINK:
CMake's check_c_source_compiles() function compiles *and* links while
AC_TRY_COMPILE only does the former. This hides potential linking issues
which should fail the configure check.
- Using CFLAGS="-Werror -W....":
This works in CMake but autoconf always appends the previously defined
CFLAGS and since we set e.g. `-Wno-undefined` some configure checks
would fail due to an unrelated warning being treated as an error.
We need to only promot specific warnings to errors instead.
While looking at this I also found that we were setting CFLAGS after
we already AC_SUBST() it, we need to do this very close to the end of configure.ac.
Moved some code into that last block.
Finally, Android has special cases for sendfile and arc4random_buf where
they're defined in the header but aren't actually there for certain API profiles.
For now we disable arc4random_buf on Android and add a special check for sendfile.
* Fix -Wreturn-type warning/error in sgen-grep-binprot.c
(cherry picked from commit 86bae56326)
* Fix sendfile with 6 parameters being misdetected
We need to make sure to actually prevent the implicit prototype since
in this case sendfile with different set of parameters actually exists
so the linker wouldn't fail.
Also fixed a few other cases of wrong configure checks due to missing headers.
* Ensure that the module cctor is run before the entry point is executed
We need to ensure that any module cctor for the 'main' image
is run *before* we invoke the entry point
This is required in order for tools like Costura
(https://github.com/Fody/Costura) to work properly. These tools inject
a module initializer which sets up event handlers (e.g. AssemblyResolve),
which allows the main method to run properly
For more information about module constructors,
see https://blogs.msdn.microsoft.com/junfeng/2005/11/19/module-initializer-a-k-a-module-constructor/
* Fix module-cctor-entrypoint.il
[2018-10] Fix mono conc hashtable lookup endless loop
<!--
Thank you for your Pull Request!
If you are new to contributing to Mono, please try to do your best at conforming to our coding guidelines http://www.mono-project.com/community/contributing/coding-guidelines/ but don't worry if you get something wrong. One of the project members will help you to get things landed.
Does your pull request fix any of the existing issues? Please use the following format: Fixes #issue-number
-->
The tombstone scrubbing fix applied in the past did not work in every case.
Since the key assignment to an element added via mono_conc_hashmap_insert() happens before the tombstone check, the tombstone count remains the same even if a tombstone was replaced.
In this case the table size check can decide to rehash to the same table size because assuming free spots will become available from not copying over the tombstones. But if all tombstones have been replaced with new elements the fill rate of the hashmap will effectively stay the same, and in the long run rehashing with the same hashmapsize finally leads to a completely filled hashmap.
In the case of a completely filled hashmap looking up an element, not contained in the hashmap, will result in an endless loop because the termination condition for lookups is finding a null key.
We continuously run into this issue with our server application.
Please include this fix into the main repository
Backport of #12382.
/cc @lewurm @hecklatcipsoft
Context: https://github.com/xamarin/xamarin-android/issues/2780
On Android the executable for the application is going to be
`/system/bin/app_process{32,64}` depending on the application's architecture.
However, libraries for the different architectures live in different
subdirectories of `/system`: `lib` for 32-bit apps and `lib64` for 64-bit ones.
Thus appending `/lib` below will fail to load the DSO for a 64-bit app, even if
it exists there, because it will have a different architecture. The quickest fix
is to use `lib64` explicitly for 64-bit Android apps.
This reverts commit 5e9f06e9c1.
We actually want to only run one build per product on a node,
e.g. so that android-debug and android-release can't run on
the same node and stomp on each other's toolchain.
When trying to use AOT profile in XA for assembly AOT compilation, the
methods from the profile were not compiled.
Context: https://github.com/xamarin/xamarin-android/issues/2504
The problem was, the profile data were not resolved, as there was no
assembly loaded in the domain.
With this fix, the compiled assembly is used to resolve the profile as
well.
[2018-10] [aot] abort lookup early when a method isn\u0027t available in AOT image
Mixed mode depends on that. Usually, compile_method of mini takes care
to request only existing methods from the AOT image, but in some cases,
e.g. from a trampoline, AOT runtime is quiered directly.
Contributes to https://github.com/xamarin/xamarin-macios/issues/5618
Backport of #13138.
/cc @lewurm
- Previous test with 100 micro second timeout would fail on iOS device when running **all the socket tests** about 3 times out of 5.
- With a 1 millisecond timeout, it didn't fail the 10 times I tried locally, hopefully this is enough to fix the flakiness.
- Fixes#8360: [System.Net.Sockets] flakey failures of SocketTest.TestSelect1 on Darwin systems
(https://github.com/mono/mono/issues/8360)
- Also partial fix for maccore issue https://github.com/xamarin/maccore/issues/1069
(cherry picked from commit 0525583d1e)
* [monodroid] Use CoreFX to fill in reference stubs for System.Drawing types that are currently 'forked' from Mono into Mono.Android.dll
The list of localy implemented System.Drawing types: https://github.com/xamarin/xamarin-android/blob/e0da1f152de84c4cc39983f2fda775ec98c08250/src/Mono.Android/Mono.Android.csproj#L311-L325
* [netstandard] Update for Mono.Android change
* Bump reference assemblies to include Mono.Android update
* Use System.Drawing.Common to find moved types in monodroid case for netstandard facade
* Bump API snapshot submodule
* [csproj] Update project files
Later levels of glibc redefine struct ucontext to typedef struct ucontext_t. This PR will check the level of glibc and define MonoContext appropriately.
Backport of #12272.
[2018-10] [bitcode] round up value type size for slot calculation
consider
```csharp
struct S3
{
public ushort X;
public ushort Y;
public ushort Z;
}
```
this would be 3 * 2 = 6 bytes. Structs, however, are passed around as i32
arrays in LLVM IR between functions. Those, if such a struct is passed, are
split to `int32`s depending on the struct's size. The previous calulation was
wrongly reserving one such i32 slot instead of two for `S3` above.
Additionally increase slot size to i64 so that it aligns with a
slightly different ABI on arm64_32.
Fixes https://github.com/mono/mono/issues/8486
@rolfbjarne I've tested it on a arm64_32 device, please confirm that this fixes the issue on your armv7k device as well
Backport of #12992.
/cc @lewurm
Due to current order, process togglerefs and then take current threads
stack could cause a problem where toogleref references might be left
in registers after native code process the list and those reference
would then be put into current thread context, incorrectly pinning the
toggleref, preventing it from being GC:ed. The problem was observed on
Windows (in debug build) running sgen-toggleref.exe runtime test since
the native compile of sgen_process_togglerefs used a register when
walking the list of togglerefs that was then not re-used until the
current threads stack was taken, causing incorrect pinning. This problem
could in theory happen on any platform depending on how sgen_process_togglerefs
would been compiled and what register will be used.
Fix is to take current threads context before walking the togglerefs to make
sure we are not getting managed references into registers as part of managing
the toggleref list in native code.
Reverting part of this commit #12114, removing this part the test ShouldCorrectlyStepOverOnExitFromArgsAfterStepInMethodParameter continues working and solve the regressions of 12881.
Inserted a new test that reproduces the regression.
Fixes#12881
Backport of #12950.
/cc @thaystg
If this is not done, Android is not able to resolve mono symbols that are used in mono-native (e.g. mono_add_internal_call_with_flags), and will refuse to load the library with 'cannot locate symbol' errors
[2018-10] [arm/bitcode] mark valuetype returns as such when dealing with pinvokes
On armv7 our calling convention happens to be the same as the platform
one. However, when using a armv7 cross compiler to generate bitcode that
targets a different platform (e.g. arm64_32) the calling convention can
be different (e.g. on arm64_32, a return buffer must be passed via r8).
Thus, mark it properly for LLVM so it can generate correct code.
Backport of #12894.
/cc @luhenry @lewurm
* [interp] Add method to seq_points table after we finish registering it
When adding a breakpoint (mono_de_set_breakpoint) we search in this table for seq_point information for the method. If we find the information we expect that the method is already compiled and has the metadata initialized when actually adding the breakpoint (set_bp_in_method). We were crashing if the jinfo field of the interp method was not yet initialized.
Fixes https://github.com/xamarin/xamarin-macios/issues/5381
* [interp] Move profiler callback when we are actually done
Just in case.
Normally strings are encoded as length-then-utf8 in ECMA-335. But a null
String is encoded as just the byte 0xFF.
When we make a CustomAttributeBuilder for a MarshalAsAttribute and attach it to
some parameter we first encode the CAB as a byte blob and then decode it in
CAB.get_umarshal into a UnmanagedMarshal attribute. But the decoding didn't
account for the possibility of null strings.
Fixes https://github.com/mono/mono/issues/12747
TypeTest.MakeGenericType_BadUserType
TypeTest.MakeGenericType_NestedUserDefinedType
TypeTest.MakeGenericType_UserDefinedType
TypeTest.TestMakeGenericType_UserDefinedType_DotNet20SP1
These tests pass when run with the interpreter on xamarin-macios.
They were disabled on master with https://github.com/mono/mono/commit/dc9bc9e0e6462739872117afc59e46fbc780d981
The 2018-10 lane seemed to be failing some tests because the merp-json-valid.exe test left behind the crash log file. I fixed that in this PR, but also move the tests into their separate folders so they can run at the same time safely.
Backport of #12830.
This fixes a regression introduced by
https://github.com/mono/mono/commit/5187b0bdaaff56936d697b0753dad51e7498991d
The AOT compiler wasn't aware of the icalls since they are guarded by
`ENABLE_MONOTOUCH`. Passing `--enable-monotouch` to configure of the AOT
compiler enables that define, so it can properly resolve those icalls.
However, to avoid `zlib` dependency for the cross compilers, we stub
them out.
The managed linker removes the type embedded inside mscorlib and we don't want to whitelist it in linker xml since then it'd be kept for everyone.
Instead move the type to the test assembly and remove the reflection-based tests.
* [metadata] print just the assembly name when dumping the vtable.
* [metadata] Extract print_vtable_layout_result.
* [metadata] Improve --print-vtable.
* [metadata] Improve --print-vtable when dealing with broken types or abstract methods.
* [metadata] Make type dup used by inflate_generic_type be cmod aware. Fixes#10834
We didn't include cmods when inflating var/mvar cuz we'd mono_metadata_type_dup' the inflated type
and not the (m)var MonoType.
The solution is to add a variant of mono_metadata_type_dup that takes the source of cmods to use.
* [mini] Add regression test for #10834.
We were only doing the -mmacosx-min-version replacement magic on
CFLAGS and LDFLAGS for mono-native-compat and -unified,
but we need to do the same for CPPFLAGS/CXXFLAGS too.
Fixes an issue where the libraries were targeting the wrong minimum OSX
version when built from xamarin-macios since they pass the minimum version
in CPPFLAGS instead of CFLAGS for OSX.
* When moving parameters for tailcall, first copy the parameters using ARMREG_IP and after that get destination in ARMREG_IP, then it's not necessary the PUSH and POP to SP nor the saved_ip_offset.
Fixes#11489
* [runtime] Switch to GC Unsafe in mono_property_get_value
It's external only, so it should switch from GC Safe to GC Unsafe when called.
Addresses crash in https://github.com/mono/mono/issues/12724
* [runtime] Make mono_image_loaded external only
Also mono_image_loaded_full
Runtime should use mono_image_loaded_internal
* [runtime] Make mono_get_exception_argument_null external only
`CSharpCodeGenerator` runs a compiler while redirecting its standard error and
standard output streams for further reporting. However, in doing that it fails
to read the standard output data completely and also fails to properly wait for
the standard error output to complete. Depending on environment it may lead to
the process using `CSharpCodeGenerator` hanging while the process has already
exited but there still is data to be read from standard output and standard
error.
This commit changes the code to an implementation of reading standard error and output
that makes sure all the data is read before the process is closed.
The hope is that it may fix some of the timeouts/hangs we see on the
Xamarin.Android build bots as a portion of them hangs in test that use the
code generator.
Backport of #12685.
* [runtime] Don't probe for assemblies when MONO_AOT_MODE_NONE is set
* [runtime] Don't assert when MONO_AOT_MODE_NONE passed to setter
* [runtime] Fix aot mode double init check
* [crash] Support extra merp params
* [runtime] Make infrastructure for merp tests
* [runtime] Fix dumping when crash happens without sigctx
* [runtime] Disable crashy (886/1000 runs) stacktrace walker
* [crash] Remove usage of allocating build/os info functions
* [crash] Remove often-crashing g_free on native crash path
* [crash] Add crash_reporter checked build
We add a checked build mode that asserts when mono mallocs inside of
the crash reporter. It makes risky allocations into assertions. It's
useful for automated testing because the double-abort often represents
itself as an indefinite hang. If it happens before the thread dumping
supervisor process is started, or after it ends, the crash reporter
hangs.
* [crash] Remove reliance on nested SIGABRT/double-fault (broken on OSX)
* [crash] Fix top-level handling of double faults/assertions
* [runtime] Make fatal unwinding errors return into handled error paths
* [crash] Change dumper logging for better info
* [runtime] Fix handling of segfault on sgen thread
Threads without domains that get segfaults will end up in
this handler. It's not safe to call this function with a NULL domain.
See crash below:
```
* thread #1, name = 'tid_307', queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=2, address=0x10eff40f8)
* frame #0: 0x000000010e1510d9 mono-sgen`mono_threads_summarize_execute(ctx=0x0000000000000000, out=0x0000001000000000, hashes=0x0000100000100000, silent=4096, mem="", provided_size=2199023296512) at threads.c:6414
frame #1: 0x000000010e152092 mono-sgen`mono_threads_summarize(ctx=0x000000010effda00, out=0x000000010effdba0, hashes=0x000000010effdb90, silent=0, signal_handler_controller=1, mem=0x0000000000000000, provided_size=0) at threads.c:6508
frame #2: 0x000000010df7c69f mono-sgen`dump_native_stacktrace(signal="SIGSEGV", ctx=0x000000010effef48) at mini-posix.c:1026
frame #3: 0x000000010df7c37f mono-sgen`mono_dump_native_crash_info(signal="SIGSEGV", ctx=0x000000010effef48, info=0x000000010effeee0) at mini-posix.c:1147
frame #4: 0x000000010de720a9 mono-sgen`mono_handle_native_crash(signal="SIGSEGV", ctx=0x000000010effef48, info=0x000000010effeee0) at mini-exceptions.c:3227
frame #5: 0x000000010dd6ac0d mono-sgen`mono_sigsegv_signal_handler_debug(_dummy=11, _info=0x000000010effeee0, context=0x000000010effef48, debug_fault_addr=0xffffffffffffffff) at mini-runtime.c:3574
frame #6: 0x000000010dd6a8d3 mono-sgen`mono_sigsegv_signal_handler(_dummy=11, _info=0x000000010effeee0, context=0x000000010effef48) at mini-runtime.c:3612
frame #7: 0x00007fff73dbdf5a libsystem_platform.dylib`_sigtramp + 26
frame #8: 0x0000000110bb81c1
frame #9: 0x000000011085ffe1
frame #10: 0x000000010dd6d4f3 mono-sgen`mono_jit_runtime_invoke(method=0x00007faae4f01fe8, obj=0x0000000000000000, params=0x00007ffee1eaa180, exc=0x00007ffee1ea9f08, error=0x00007ffee1eaa250) at mini-runtime.c:3215
frame #11: 0x000000010e11509d mono-sgen`do_runtime_invoke(method=0x00007faae4f01fe8, obj=0x0000000000000000, params=0x00007ffee1eaa180, exc=0x0000000000000000, error=0x00007ffee1eaa250) at object.c:2977
frame #12: 0x000000010e10d961 mono-sgen`mono_runtime_invoke_checked(method=0x00007faae4f01fe8, obj=0x0000000000000000, params=0x00007ffee1eaa180, error=0x00007ffee1eaa250) at object.c:3145
frame #13: 0x000000010e11aa58 mono-sgen`do_exec_main_checked(method=0x00007faae4f01fe8, args=0x000000010f0003e8, error=0x00007ffee1eaa250) at object.c:5042
frame #14: 0x000000010e118803 mono-sgen`mono_runtime_exec_main_checked(method=0x00007faae4f01fe8, args=0x000000010f0003e8, error=0x00007ffee1eaa250) at object.c:5138
frame #15: 0x000000010e118856 mono-sgen`mono_runtime_run_main_checked(method=0x00007faae4f01fe8, argc=2, argv=0x00007ffee1eaa760, error=0x00007ffee1eaa250) at object.c:4599
frame #16: 0x000000010de1db2f mono-sgen`mono_jit_exec_internal(domain=0x00007faae4f00860, assembly=0x00007faae4c02ab0, argc=2, argv=0x00007ffee1eaa760) at driver.c:1298
frame #17: 0x000000010de1d95d mono-sgen`mono_jit_exec(domain=0x00007faae4f00860, assembly=0x00007faae4c02ab0, argc=2, argv=0x00007ffee1eaa760) at driver.c:1257
frame #18: 0x000000010de2257f mono-sgen`main_thread_handler(user_data=0x00007ffee1eaa6a0) at driver.c:1375
frame #19: 0x000000010de20852 mono-sgen`mono_main(argc=3, argv=0x00007ffee1eaa758) at driver.c:2551
frame #20: 0x000000010dd56d7e mono-sgen`mono_main_with_options(argc=3, argv=0x00007ffee1eaa758) at main.c:50
frame #21: 0x000000010dd5638d mono-sgen`main(argc=3, argv=0x00007ffee1eaa758) at main.c:406
frame #22: 0x00007fff73aaf015 libdyld.dylib`start + 1
frame #23: 0x00007fff73aaf015 libdyld.dylib`start + 1
thread #2, name = 'SGen worker'
frame #0: 0x000000010e2afd77 mono-sgen`mono_get_hazardous_pointer(pp=0x0000000000000178, hp=0x000000010ef87618, hazard_index=0) at hazard-pointer.c:208
frame #1: 0x000000010e0b28e1 mono-sgen`mono_jit_info_table_find_internal(domain=0x0000000000000000, addr=0x00007fff73bffa16, try_aot=1, allow_trampolines=1) at jit-info.c:304
frame #2: 0x000000010dd6aa5f mono-sgen`mono_sigsegv_signal_handler_debug(_dummy=11, _info=0x000070000fb81c58, context=0x000070000fb81cc0, debug_fault_addr=0x000000010e28fb20) at mini-runtime.c:3540
frame #3: 0x000000010dd6a8d3 mono-sgen`mono_sigsegv_signal_handler(_dummy=11, _info=0x000070000fb81c58, context=0x000070000fb81cc0) at mini-runtime.c:3612
frame #4: 0x00007fff73dbdf5a libsystem_platform.dylib`_sigtramp + 26
frame #5: 0x00007fff73bffa17 libsystem_kernel.dylib`__psynch_cvwait + 11
frame #6: 0x00007fff73dc8589 libsystem_pthread.dylib`_pthread_cond_wait + 732
frame #7: 0x000000010e28d76d mono-sgen`mono_os_cond_wait(cond=0x000000010e44c9d8, mutex=0x000000010e44c998) at mono-os-mutex.h:168
frame #8: 0x000000010e28df4f mono-sgen`get_work(worker_index=0, work_context=0x000070000fb81ee0, do_idle=0x000070000fb81ed4, job=0x000070000fb81ec8) at sgen-thread-pool.c:165
frame #9: 0x000000010e28d2cb mono-sgen`thread_func(data=0x0000000000000000) at sgen-thread-pool.c:196
frame #10: 0x00007fff73dc7661 libsystem_pthread.dylib`_pthread_body + 340
frame #11: 0x00007fff73dc750d libsystem_pthread.dylib`_pthread_start + 377
frame #12: 0x00007fff73dc6bf9 libsystem_pthread.dylib`thread_start + 13
thread #3, name = 'Finalizer'
frame #0: 0x00007fff73bf6246 libsystem_kernel.dylib`semaphore_wait_trap + 10
frame #1: 0x000000010e1d9c0a mono-sgen`mono_os_sem_wait(sem=0x000000010e43e400, flags=MONO_SEM_FLAGS_ALERTABLE) at mono-os-semaphore.h:84
frame #2: 0x000000010e1d832d mono-sgen`mono_coop_sem_wait(sem=0x000000010e43e400, flags=MONO_SEM_FLAGS_ALERTABLE) at mono-coop-semaphore.h:41
frame #3: 0x000000010e1da787 mono-sgen`finalizer_thread(unused=0x0000000000000000) at gc.c:920
frame #4: 0x000000010e152919 mono-sgen`start_wrapper_internal(start_info=0x0000000000000000, stack_ptr=0x000070000fd85000) at threads.c:1178
frame #5: 0x000000010e1525b6 mono-sgen`start_wrapper(data=0x00007faae4f31bd0) at threads.c:1238
frame #6: 0x00007fff73dc7661 libsystem_pthread.dylib`_pthread_body + 340
frame #7: 0x00007fff73dc750d libsystem_pthread.dylib`_pthread_start + 377
frame #8: 0x00007fff73dc6bf9 libsystem_pthread.dylib`thread_start + 13
thread #4
frame #0: 0x00007fff73c0028a libsystem_kernel.dylib`__workq_kernreturn + 10
frame #1: 0x00007fff73dc7009 libsystem_pthread.dylib`_pthread_wqthread + 1035
frame #2: 0x00007fff73dc6be9 libsystem_pthread.dylib`start_wqthread + 13
(lldb)
```
* [crash] Add signal-safe mmap/file "allocator"
* [crash] Remove use of static memory from dumper
* [runtime] Reduce print buffer size for lockless printer.
Each frame that prints ends up increased by the size of buff.
In practice, clang often fails to deduplicate some of these buffers,
leading to 30k-big stackframes.
It was noticed by a series of hard-to-diagnose segfaults on stacks that
looked otherwise fine during the crash reporting stress test.
This change fixes this, making stacks a 1/10th of the size. It doesn't
seem to break the crash reporter messages anywhere (may need to shrink
other "max name length" fields), and it's not mission-critical anywhere
else.
* [crash] Use async-safe file memory for dumper internals
* [crash] Add memory barriers around merp configuration
* [crash] Use signal-safe printers on all native crash paths
* [crash] Move gdb/lldb lookup to startup
* [runtime] Move MOSTLY_ASYNC_SAFE_FPRINTF to eglib
* [runtime] Fix all callsites of MOSTLY_ASYNC_SAFE_PRINTF
* [runtime] Fix all callsites of MOSTLY_ASYNC_SAFE_FPRINTF
* [crash] Switch to signal-safe exit function
* [crash] Make dumper enum in managed
* [runtime] Add more information to managed frame
* [crash] Make async_safe printers inlined
* [runtime] Move basic pe_file functionality into proclib
* [crash] Fix handling of thread attributes
* [crash] Place hashes into the json file for all threads
* [crash] Improve reporting on merp test
* [crash] Log the locations of written-to files, for better post-portems
Backport of: https://github.com/mono/mono/commit/eebe4b52857140ba9dea872c6249960273d222f2 from https://github.com/mono/mono/pull/12454
The latest Android NDK releases no longer ship with per-platform C headers.
Instead they ship with a set of unified headers and require the presence of the
`__ANDROID_API__` macro in order to select the target platform.
The AOT offset dumper doesn't support this new layout and this commit changes
that by adding support for the unified headers (without removing support for the
older NDKs) thus fixing the following error when trying to dump the offsets with
newer NDK:
Processing triple: aarch64-v8a-linux-android
Error parsing '[...]/mono/mono/metadata/metadata-cross-helpers.c'
[...]/mono/mono/metadata/metadata-cross-helpers.c(5,10): fatal: 'stdio.h' file not found
Error parsing '[...]/mono/mono/mini/mini-cross-helpers.c'
[...]/mono/mono/mini/mini-cross-helpers.c(7,10): fatal: 'stdio.h' file not found
After .NET 4.5 .NET Framework has changed the System.ComponentModel.Composition ReflectionModelServices.IsExportFactoryImportDefinition to not throw.
Updating this to match the .NET Framework behavior.
* [Debugger] Debugger crashes when inside a class, there is an internal struct, with a field that is an enumerator.
files.myBucket.GetEnumerator().get_Current().Key
Fixes#10735
Reverts a29ad08d00 (#9914)
The basic problem we want to solve is the following:
1. All access to InternalThread:state must be protected by the
InternalThread:synch_cs mutex
2. We must destroy the mutex when we are done with the thread.
3. We don't know which happens later - detaching the machine thread or
finalizing its InternalThread managed object.
The solution is to replace InternalThread:synch_cs by InternalThread:longlived
which is a refcounted struct that holds the synch_cs. The refcount starts out
at 2 when the thread is attached to the runtime and when we create the managed
InternalThread object that represents it.
Both detaching and finalizing the managed object will decrement the refounct,
and whichever one happens last will be responsible for destroying the mutex.
This addresses https://github.com/mono/mono/issues/11956 which was a race
condition due to the previous attempt to fix this lifetime problem. The
previous attempt incorrectly used CAS in mono_thread_detach_internal while
continuing to use locking of synch_cs elsewhere. In particular
mono_thread_suspend_all_other_threads could race with
mono_thread_detach_internal: it expects to take the thread lock and test
thread->state and use the thread->suspended event, while detaching deletes
thread->suspended without taking a lock.
As a result we had a concurrency bug: in suspend_all_other_threads it's
possible to see both the old (non-Stopped) value of thread->state and the
new (NULL) value of thread->suspended. Which leads to crashes.
---
Background - why we don't know if detaching or finalization happens first.
1. InternalThread normally outlives the machine thread. This can happen because
when one thread starts another it can hold a reference to the fresh thread's
Thread object which holds a reference to the InternalThread. So after the
machine thread is done, the older thread can query the state of the younger
Thread object. This is the normal situation.
2. During shutdown we can have the opposite situation: the InternalThread
objects are finalized first (this happens during root domain finalization), but
the machine threads are still running, and they may still return to
start_wrapper_internal and call detach_internal. So in this case we have an
InternalThread whose finalizer ran first and detach will run second.
[2018-10] [debugger][backport] Fix test ShouldCorrectlyStepOverOnExitFromArgsAfterStepInMethodParameter (#12114)
Backport of #12114
The problem was in this line:
ss_nested_with_two_args(ss_nested_arg (), ss_nested_arg ());
The first step_into works correctly entering in the ss_nested_arg method, but the second one doesn't work.
The problem was because this flag MONO_SEQ_POINT_FLAG_NONEMPTY_STACK was set, so the debugger don't consider that it was a possible break.
The solution of the issue was create another flag to identify nested calls and ignore the MONO_SEQ_POINT_FLAG_NONEMPTY_STACK.
2 new tests were added to test other nested calls.
* [crash] Early exit if callbacks not set
* [crash] Report which thread was crashing
* [runtime] Make sure lldb/gdb dump happens when MERP fails
* [crash] Create supervisor thread for crash dumper
* [runtime] Add waitpid to probed-for libc functions
* [crash] Add crash reporter logger
* [crash] Disable mono-merp when disabling crash reporting
* [crash] Switch merp dumper to no-allocate file writer
- Pass merp directory to backend (optional)
- Adds tests that needed the named change
* [crash] Make mono-state use non-allocating format strings
* [crash] Add json formatting validators to mono/tests
* [crash] Make crash-sending icalls use const strings
* [crash] Use fork+exec for merp
* [crash] Throw exception when unable to contact merp
* [crash] Disable merp-json-valid test on non-OSX
* [crash] Fix mono-state writer trailing comma
* [runtime] Remove duplicate merp invoke line
* [crash] Fix comma mismatch in json writer
* [crash] Fix C++ declaration of crash logger functions
Xamarin.Android is looking to switch to using the latest Android NDK, r18.
However, there are a few build issues in Mono and BTLS which need to be
addressed before that happens.
* BTLS fails to build some ARM assembly sources with NDK r18's clang.
https://github.com/mono/boringssl/pull/12 fixes this issue
* BTLS uses obsolete Android cmake toolchain file.
Add a configure option to set alternative toolchain file.
* NDK r18 minimu supported API level is 16.
This commit makes the API level configurable and sets the minimum platform
to API 16
* NDK r18 makes changes to declaration of `mmap` which break Mono build.
Detect NDK version in `mono-compiler.h` and act accordingly (do not
redeclare `mmap`)
* NDK r18 doesn't have `cpp` and SDKs build assumes it's present.
Detect whether `cpp` is present and, if not, use `compiler -E` instead.
* NDK r18 uses unified headers exclusively and requires __ANDROID_API__ to be
set in order to present the correct set of native APIs.
SDKs now define the macro when the `ANDROID_NEW_NDK` Make variable is set to
anything else than `no`.
Fixes https://github.com/mono/mono/issues/11317
(I guess I need to update culture-info-tables.h via make but it doesn't work on Windows, I have to switch to macOS).
Backport of #11327.
/cc @marek-safar @EgorBo
[2018-10] [Network] Fix CVE 2018-8292 on Mac OS X.
This commit ensures that CVE 2018-8292 is fixed by not setting
auto-redirect in the first request done by CFNetwork. CFNetwork has the
same bug, but we can work around it by performing the first request,
checking the response and, if it is a rediret, follow it without the
Authorization headers.
PS: This fix should be ported to 2018-08, 2018-10 and 2018-12.
Backport of #12047.
/cc @mandel-macaque
* Fix bug in pulse transition - the suspend count was lost and incorrectly
swapped to 0.
* finish_async_suspend transition - add assertions that the suspend count is
positive. Try to catch incorrect states sooner.
Fixes https://github.com/mono/mono/issues/12235
[2018-10] [mini] use AOT trampolines in interp mixed mode
Fixes this on mscorlib/mixed mode on Xamarin.iOS:
```
[FAIL] NonExceptional.Serialization_Deserialization : System.Runtime.Serialization.SerializationException : An error occurred while deserializing the object. The serialized data is corrupt.Â
[FAIL] NonExceptional.Serialize_Deserialize_FixedDateRule : System.Runtime.Serialization.SerializationException : An error occurred while deserializing the object. The serialized data is corrupt.Â
[FAIL] NonExceptional.Serialize_Deserialize_FloatingDateRule : System.Runtime.Serialization.SerializationException : An error occurred while deserializing the object. The serialized data is corrupt.Â
[FAIL] SerializationTests.Serialization_Deserialization : System.Runtime.Serialization.SerializationException : An error occurred while deserializing the object. The serialized data is corrupt.Â
[FAIL] TimeZoneTest.CurrentTimeZone_SerializationRoundtrip : System.Runtime.Serialization.SerializationException : An error occurred while deserializing the object. The serialized data is corrupt.Â
```
Backport of #11767.
/cc @lewurm
* [threading] Add `pulse` transition and begin_pulse_resume_and_request_suspension operation.
A `pulse` atomically resumes a preemptively suspended GC Safe thread and
requests that it suspend again.
If the thread reaches a GC Safe -> GC Unsafe transition, it will self-suspend.
If it doesn't, another iteration of the 'mop up' STW phase will async suspend
it again.
* [threading] Use pulse_resume_and_request_suspension in STW
With non-hybrid suspend, a pulse is just a resume.
With hybrid suspend, a `pulse` is a combination of a resume of a preemptively
suspended GC Unsafe thread and a request that it suspend again - as if we
atomically resumed the thread and then applied the initial phase of two-phase
suspend again. If the now-running thread comes to a GC Safe -> GC Unsafe
transition it will suspend. If not, we will preemptively suspend it again
during the mop-up phase.
The important thing is that we don't want the thread to transition to GC Unsafe
again: if it does so, it may try to take a lock that some other
async-suspended thread is holding, and it will never reach a safepoint ---
exactly the situation that two-phase suspend is supposed to solve.
* [threads] Add mono_threads_is_multiphase_stw_enabled
Flip the logic in mono_thread_info_begin_pulse_resume_and_request_suspension
This pull request fixes starting a process with an empty environment variable collection in `ProcessStartInfo`. As per the issue it fixes a regression that it used to work but currently an empty environment variable collection works like it was never touched.
I also made a minor fix to remove the `StringBuilder` because a simple `string.Concat` does the job without the `StringBuilder` allocation and overhead.
I've included unit tests. Please let me know if you'd like any changes.
Fixes#8766
Backport of #11630.
* [sdks] Compile support/{zlib-helper,nl}.c so XA doesn't have to cherry-pick it.
* [sdks] Fix ios and android compilation and use of tests
The tests are already built as part of the archive, so there is no need to recompile them. We just need to pick them from the right folder.
Otherwise it might have left-over files from previous builds since it
uses our custom submodule system which isn't catched by Jenkins cleaning.
(cherry picked from commit 49a5af74f7)
(cherry picked from commit b429e290e8)
.NET resource assemblies live in subdirectories named after the culture
of the resource. We need to package these assemblies too.
Follow up to https://github.com/mono/mono/pull/11575
(cherry picked from commit ab9c940dff)
[2018-10] [ios] remove DISABLE_POLICY_EVIDENCE
Originally it was introduced with db3591b
It seems like only the icall definitions were disabled for device
runtimes (which aren't shipped there anyway), however the icalls
themselves are _included_ in the device runtime. Not sure what the
rationale was behind this. Since the original change is very old, I
think it just happened to be like that today. When running with the
interpreter we need the definitions at runtime too (via the optional
icall table that is linked in, so no additional cost for the fullAOT
runtime due to this change).
Backport of https://github.com/mono/mono/pull/11565
/cc @lewurm
[2018-10] Fix ref return for structs in runtime invoke wrapper.
Use mono_mb_emit_op for CEE_LDOBJ to ensure wrapper data is added for
indirect load of a ref return value as method-to-ir expects this for wrappers.
Backport https://github.com/mono/mono/pull/11514
/cc @joncham
[2018-10] Fixing ParameterInfo.RawDefaultValue for non-null default values of DateTime?` and decimal?
Backport of #11330.
/cc @marek-safar @MaximLipnin
Description:
Adding checks for `DateTime?` and `decimal?` to `DefaultValue` property getter will allow to retrieve correct values instead of System.Reflection.Missing
Fixes https://github.com/mono/mono/issues/11303
[2018-10] [bcl] avoid false pinning in GCTest
Backport of #11521.
/cc @luhenry @lewurm
Description:
needed for mscorlibtests on Xamarin.iOS with interpreter
[2018-10] [interp] accept typed-by-ref as return type from a JIT call
Backport of #11522.
/cc @luhenry @lewurm
Description:
happens on fullAOT + interp on mscorlib tests
In preparation of the upcoming FSW support, `Mono.Native` now supports icall registration
and has a test added for this. This doesn't actually hook up FSW yet on iOS, but all the
preparations have been made as well as some tests for it.
* When using Bitcode (iOS only), we now link against the Mono runtime because we cannot have
any undefined symbols. Without Bitcode, the `mtouch` tool will do the linking for us.
* Add `-framework GSS` if needed.
* Removed `common/MonoNativeConfig.cs` - the test harness in `xamarin-macios/tests/xharness`
now takes care of that.
* Include a few more `System.Native` files on IOS.
* `mono_native_initialize()`: New native method to initialize the module and register any
necessary icalls. We register a new `Mono.MonoNativePlatform::IncrementInternalCounter`
icall for testing purposes.
* `mono_native_is_initialized()`: New native method for testing.
* `MonoNativePlatform.Initialize()`, `IsInitialized()`: Managed side of these.
* `MonoNativePlatform.IncrementInternalCounter()`: New icall, which is registered by
`mono_native_initialize()` - this is used by the test suite to make sure the icall
registration works.
* `NativePlatformTest`: Removed compat / unified check, see above. Add tests to call
the other managed APIs via reflection.
The change which made the handler return (rather than crashing the
runtime) did not consider this control flow path that causes the sigterm
signal handler to trigger the merp dumper if we return.
We now always return.
This was previously so that a random sigterm could be used to trigger a
dump. This isn't really used, and won't work right now anyways
(we don't register it until right before we dump). My fix is to remove
it, and to make the signal handler only work as part of the dumper
machinery.
[2018-10] x86 mono_arch_get_patch_offset: add support for 0xe9/jmp eip+32b.
Backport of #11089.
/cc @lewurm @jaykrell
Description:
I don't know what the specific code is or what changed, etc.
This addresses Mac/x86:
https://jenkins.mono-project.com/job/test-mono-pull-request-i386-osx/15364/parsed_console/log.html
```Unable to compile method 'int Tests:calli_sig_check_2 ()' due to: 'Invalid IL code in Tests:calli_sig_check_2 (): IL_000b: calli 0x11000044```
which then fails an assert and fails overall.
CI goes deep into bash w/o echoing commands but a repro is:
cd mono/mini
MONO_PATH=./../../mcs/class/lib/net_4_x lldb -- ./mono --aot iltests.exe
The code is meant to be invalid, and meant to raise an exception,
which is catchable/resumable (at least in the JIT case where
executing IL the first time, can raise an exception while caller is
running, vs. AOT where the codegen all happens offline -- leaving what?
A note made at AOT time that calling the code should raise an exception?).
It isn't meant to fail an assert in either case.
test_lib might not be set yet at this point since we're including library.make
later on, use LIBRARY instead which is set further above.
(cherry picked from commit 87493e96fb)
Mono doesn't use libxml2 and neither do the LLVM bits used by Mono when building
the AOT cross-compilers. Presence of `-lxml2` on the command line breaks 32-bit
builds on 64-bit Linux hosts:
libtool: link: cc -shared -fPIC -DPIC -Wl,--whole-archive ./.libs/libmini.a ./.libs/libmono-ee-interp.a ./.libs/libmono-dbg.a ../../mono/metadata/.libs/libmonoruntimesgen.a ../../mono/sgen/.libs/libmonosgen.a ../../mono/utils/.libs/libmonoutils.a ../../mono/eglib/.libs/libeglib.a -Wl,--no-whole-archive -lLLVMBitWriter -lLLVMAnalysis -lLLVMProfileData -lLLVMObject -lLLVMMCParser -lLLVMMC -lLLVMBitReader -lLLVMCore -lLLVMBinaryFormat -lLLVMSupport -lLLVMDemangle -L$HOME/xamarin-android/external/mono/sdks/out/llvm-llvm32/lib -lz -ltinfo -lxml2 -lstdc++ -lm -lrt -ldl -lpthread -O0 -ggdb3 -m32 -g -mno-tls-direct-seg-refs -Wl,-export-dynamic -Wl,-soname -Wl,libmonosgen-2.0.so.1 -o .libs/libmonosgen-2.0.so.1.0.0
mv -f .deps/libmini_la-aot-runtime-wasm.Tpo .deps/libmini_la-aot-runtime-wasm.Plo
/usr/bin/ld: skipping incompatible //usr/lib/x86_64-linux-gnu/libxml2.so when searching for -lxml2
/usr/bin/ld: skipping incompatible //usr/lib/x86_64-linux-gnu/libxml2.a when searching for -lxml2
/usr/bin/ld: cannot find -lxml2
collect2: error: ld returned 1 exit status
make[7]: *** [Makefile:1495: libmonosgen-2.0.la] Error 1
Installation of `libxml2-dev` (on Ubuntu/Debian + friends) for the x86
architecture (or x86_64 architecture on 32-bit host) would be possible but then
it would break the 64-bit build because the 64-bit version of the library would
be absent. It would be a problem if Mono+LLVM actually used xml2, but since it
doesn't we can just disable the feature completely.
(cherry picked from commit 0d68ffd1ce)
* [System.Core]Stub out `Interop.Sys.GetEUid` and `SetEUid`.
This is a temporary fix; the native side still needs to be ported from c++
and tested.
* [csproj] Update project files
* [cxx] Do not define C++ keywords: bool, inline, final, it can break things.
https://jenkins.mono-project.com/job/d/421/parsed_console/log.html
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\include\xkeycheck.h(250): fatal error C1189: #error: The C++ Standard Library forbids macroizing keywords. Enable warning C4005 to find the forbidden macro. [d:\j\workspace\d\msvc\libmonoruntime.vcxproj]
* PR: Leave profiler defining C++ keywords (define bool char).
* PR: Restore libgc.
MemberInfoTests.cs and TypeInfoTests moved from System.Runtime -> System.Reflection
Also some tests were added to ParameterInfoTests.cs that fail on 2018-10
* [threads] Make mono_add_internal_call external only
The runtime should use mono_add_internal_call_internal or
mono_add_internal_call_with_flags.
The thread suspend mechanism needs to know if an icall is added via the legacy
mono_add_internal_call API (which is not coop-aware, and so the registered
icalls must run in GC Safe mode), or if it is added by the runtime or by a
cooperative client (currently either the profiler or the System.Native PAL)
which knows to add GC transitions and safepoints and not to block indefinitely.
* [marshal] Factor out GCSafeTransitionBuilder
Make a local builder for creating the GC Safe transition calls for a method wraper.
* [sgen] Add coop GC transitions in mono_gc_toggleref_add
Also mark it external only. It's not used inside the runtime.
* [marshal] Emit GC Safe transitions around foreign icalls.
A foreign icall is added using mono_add_internal_call and that is not coop GC
aware. (The runtime uses mono_add_internal_call_with_flags or
mono_add_internal_call_internal)
Under hybrid suspend, foreign icalls will run in GC Safe mode and transition to
GC Unsafe only when the call back into the runtime or invoke managed code.
Fixes https://github.com/mono/mono/issues/11138
* [cxx] function type overloads for mono_add_internal_call_internal
and mono_add_internal_call_with_flags
* [runtime] Add new API call mono_dangerous_add_raw_internal_call
Under hybrid suspend, this adds an icall that is assumed to run in GC Unsafe
mode. As such it has additional requirements for correct operation: it must
not run loops without periodically polling the runtime, and it must not perform
blocking operations such as blocking I/O or taking locks without manually
switching to GC Safe mode.
Since we've started embedding test resources inside of the test assembly
we've sometimes seen a strange error on Jenkins during the test run:
```
Msg: Error initializing task StringTestTask: Could not load file or assembly 'Microsoft.Build.Utilities.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
Msg: Error initializing task StringTestTask: System.TypeLoadException: Could not load file or assembly 'Microsoft.Build.Utilities.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
at (wrapper managed-to-native) System.RuntimeType.GetConstructors_native(System.RuntimeType,System.Reflection.BindingFlags)
...
```
However this was from an xbuild_12 run so how come it tried to load xbuild 14 stuff?
The reason is there's a race condition between when TestTasks.dll gets
built and when it's embedded inside of the test assembly.
If we're building the xbuild_12 and xbuild_14 profile at the same time
we could end up embedding the xbuild_14 version of TestTasks.dll instead
of the correct one since we're copying it to the same file name.
The fix is to remove the unnecessary copying logic since we can just tell
the compiler to embed the file under the correct name.
(cherry picked from commit 6a8a2059bb)
* [arm64] Remove the limitation on the number of nullable arguments for dyncalls.
Fixes https://github.com/xamarin/xamarin-macios/issues/4984.
* [amd64] Remove the limitation on the number of nullable arguments for dyncalls.
* [jit] Add tests for dyncalls with lots of nullable arguments.
* fix merge conflict
We only build it if we're explicitly building the monodroid profile and for the
monodroid_tools profile we only build the test assembly but not dtest-app.exe
(cherry picked from commit d07ddffffe)
(cherry picked from commit 8d1dd6aa65)
Add proper dependencies to the test support files where they were missing.
Compile test files using the standard "make test" target.
(cherry picked from commit f782e36a80)
Flags to DrawText never reached MeasureText therefore strings with '&' were measured incorrect when drawn with flag TextFormatFlags.NoPrefix.
Fixes#6352
* bump external/binary-reference-assemblies
* use Mono.Android for netstandard
* use API_BIN_REFS
* move ifeq monodroid upper
* use Mono.Android in System.Drawing.Primitives instead of ns
* fix typo
* Add Mono.Android back to ns as API_BIN_REFS
* Bump API snapshot submodule
* [csproj] Update project files
* Bump api-snapshot
They require the additional files:
- mono/eglib/eglib-config.h: that's to build `libmonodroid`
- mcs/build/Consts.cs: that's to build `Mono.Posix` and `Mono.Data.Sqlite`
* [crash] More gentle error handling around stack walking
* [crash] Make self-summarizier not need managed thread state
* [crash] Remove reliance on sgen/gchandles
* [crash] Refactor dumper mechanism
* [crash] Make threads not die during thread dump
* [crash] Add support for registering/dumping native libraries
* [crash] Add silent option to dumper
* [crash] Print error when unable to dump thread
* [crash] Add icalls to directly trigger telemetry-style walks
* [crash] Increase maximum frame depth
* [crash] Add managed method names when privacy disabled
* [crash] Add tests for concurrent dumping
* [crash] Add support for concurrent global dump requests
* [crash] Switch from CAS+Sleep to semaphore for dumper
Locks and GC-Safe regions are both unsafe in a signal handler
context. CAS primitives and the sleep syscall was used before.
Semaphores appear to be safe, enabling the following cleanup.
* [runtime] Make find_method use stack memory for dumper-facing entry point
* [crash] Enable install_state_summarizer on all platforms
* [crash] Dump managed stacks from controlling thread
* [crash] Don't use allocating method name formatter
* [crash] Copy safer strings with crash privacy disabled
* [crash] Fix string races with DumpTotal icall
* [crash] Fix space in crash file name
* [crash] Fix lifetime and size checks on mono-state memory
* [crash] Fix icall declarations for new style
* [runtime] Make sequence point lookup lockless
* [crash] Fix managed exception dumper icall format
* [crash] Print half-completed dump when space runs out
* [crash] Bump static memory for crash string to 500k
Note:
- This memory isn't accessed until we're crashing
- On any modern machine, unused static memory is lazily allocated. When
we access it, the fault will trigger the MMU to map memory for us.
- This is guaranteed to be reentrant and safe. mmap (the alternative) is
surely fairly stable on many systems, but this is not guaranteed. The
documentation pages for mmap specifically claim it as not safe in these async
contexts.
* [crash] Make whitelist lookup lockless
* [crash] Split unmanaged ptrs into method ip + offset
* [crash] Copy safer strings with crash privacy disabled
* [System]Reenable native Apple Certificate support on WatchOS.
During the code refactoring this summer, support for native apple certificates
has been dropped on watchOS.
* add `apple-certificates.sources` and move all certificate-related code from
`appletls.sources`.
* move non-network related code from `MacProxy` into a new `AppleTypes`.
* add the `MONO_FEATURE_APPLE_X509` magic to `System/Makefile`, where it was
missing from.
* [csproj] Update project files
* [csproj] Update project files
* [interp] Avoid unnecessary allocations when pinvoke void functions
* [amd64] Refactor interp pinvoke context computation
* [amd64] Interp trampoline for interpreter entry
* [aot] Don't include interp_in_wrapper when we use entry trampoline
These wrappers take a lot of space in the image.
Backport of #10596.
/cc @baulig @baulig
Description of #10596:
`Mono.Native` is the new name for both `System.Native` and `System.Security.Cryptography.Apple`.
It is built as a stand-alone shared library and not bundled with the runtime because we
may need to build two different versions of it.
Starting with macOS 10.12+ and iOS 10+, Apple introduced a new Unified API for some of the
crypto primitives that we're using as part of System.Security.Cryptography.Apple.
On Desktop, we can check at runtime whether the OS version is recent enough and switch
implementation accordingly. We build a single `libmono_native` shared library.
However, on Mobile we cannot have any undefined symbols as this would break Bitcode.
During the mobile build, we are called with `CC` containing an explicit minium version flag,
which is eiter `-mmacosx-version-min=`, `-mios-simulator-version-min=` or `-miphoneos-version-min=`
depending on platform.
We build two versions of the shared library:
- `libmono_native_compat` is built with whichever minimum version is passed to us via `CC`.
- `libmono_native_unifed` is built with the minimum version set to macOS 10.12+ / iOS 10+.
For testing purpuses, there is a function called `mono_native_get_platform_type ()`
(see mono/native/mono-native-platform.c), which returns a `MonoNativePlatformType` enum value.
There is also `Mono.MonoNativePlatform.GetPlatformType ()` (see mcs/class/corlib/Mono/MonoNativePlatform.cs).
This can be called by automated tests both to ensure that the library has been correctly installed and also
to verify that it's the correct version of it.
* `configure.ac`: add new configure checks for Mono.Native.
* `mono/native/`: new directory - this replaces the `System.Native` code that was previously in `mono/metadata`.
* `mcs/class/corlib/Mono`: New internal `MonoNativePlatformType` and `MonoNativePlatform` classes.
* [sdks] Build BCL profiles without configure flags
* [sdks] Add BclTemplate to build BCL profiles
This is to avoid building all the profiles in a single `sdks/out/bcl` directory which will be shared between android, ios and wasm.
* [sdks] Simplify call to BclTemplate
* [mcs] Make directory dependency as order-only
We would otherwise always rebuild the target since the directory is updated whenever something is added to the directory. This is a common Makefile technique.
* [sdks] Build tests for BCL targets
The `X509Certificate(byte[])` constructor should call `CertificateProvider.Import(byte[])`
to use the native apple implementation if possible.
Add temporary hack to `X509Certificate2(byte[])` to ensure that we always get an
`X509Certificate2Impl`.
* [interp] fix op_implicit/op_explicit conversions for native types
Conversion operators have been mostly broken in the interpreter, for
example conversion from nint to float didn't work. While some
conversions are easy to intrinsify (like nint -> I8), there are harder
cases like nint -> decimal. The JIT actually falls back to the managed
implementation, so let's do this in the interpreter as well.
However the managed implementation expects a pointer to the value type,
i.e. the container type System.nfloat instead of float/double primitives.
In such cases the value is going to be stored in a local and then the
address of its storage is pushed on the stack before invoking the
managed implementation of the conversion.
Added test cases for scenarios observed in Xamarin.iOS.
* [interp] support ntype.CompareTo ()
* [interp] support ntype.Equals ()
* [interp] support nfloat.*Infinity
* [interp] support ntype.ToString ()
* [interp] introduce float R4 stack type
Before we only did this for PR builds but it turns out it's needed for
normal master/branch builds too.
In situations where there are two Mac builds at roughly the same time
the downstream Windows builds would otherwise both refer to the same/latest
commit since they just checkout the latest ref on the branch.
Now we reset the Windows build to the sha1 which is passed to it.
(cherry picked from commit b13145bb12)
Right now if anything goes wrong in the security stack you get a message like this:
```
System.Security.Authentication.AuthenticationException: A call to SSPI failed, see inner exception. ---> Mono.Btls.MonoBtlsException: Ssl error:1000007d:SSL routines:OPENSSL_internal:CERTIFICATE_VERIFY_FAILED
```
This is confusing since SSPI is a Windows-only thing and is not used on Mono.
We inherited this error message string from referencesource.
Change the string to something more generic which also aligns us with CoreFX:
https://github.com/dotnet/corefx/blob/a10890f4ffe0fadf090c922578ba0e606ebdd16c/src/System.Net.Security/src/Resources/Strings.resx#L210-L212
(cherry picked from commit 42e347ee47)
xamarin-macios currently builds zlib-helper.o using mono's source code.
It would be preferrable to use a version built by mono, and since
zlib-helper.o is a byproduct of building libMonoPosixHelper, we need to build
libMonoPosixHelper (we already build it for simulator architectures), even
though we don't need/use libMonoPosixHelper itself.
So they are next to their NUnit counterparts.
Move xunit remote executor app to tests dir too and compile it when
compiling the test assembly instead of doing it before running the test.
We need to use an absolute path for the xunit remote executor and it
needs to be in Windows format on Windows since we pass it as an env var
to the xunit tests.
[2018-10] [runtime] Disable stack guard for main thread on osx
Backport of #10899.
/cc @luhenry @BrzVlad
Description of #10899:
On macOS Mojave, it seems that changing the mapping of stack pages for main thread can lead to corruption bugs.
https://github.com/mono/mono/issues/10802
<!--
Thank you for your Pull Request!
If you are new to contributing to Mono, please try to do your best at conforming to our coding guidelines http://www.mono-project.com/community/contributing/coding-guidelines/ but don't worry if you get something wrong. One of the project members will help you to get things landed.
Does your pull request fix any of the existing issues? Please use the following format: Fixes #issue-number
-->
If another thread locked at least one of the other handles, and there is a
cooperative GC STW happening, this function will loop forever.
Add GC Safe transitions around the call to sleep to give this thread a chance
to suspend.
Fixes https://github.com/mono/mono/issues/10863
* [sdks] Remove redundant --enable-cxx
* [sdks] Shorten `-m32`/`-m64` parameters detection for runtimes
* [sdks] Build BCL profiles without configure flags
* [sdks] Create archive targets for pre-building on CI
* [sdks] Add BclTemplate to build BCL profiles
This is to avoid building all the profiles in a single `sdks/out/bcl` directory which will be shared between android, ios and wasm.
* [sdks] Use archive-{android,ios,wasm} on CI
* [sdks] Run archive-llvm-llvm{,win}{32,64} on CI
publicconststringInvalidColor="Color '{0}' is not valid.";
publicconststringInvalidEx2BoundArgument="Value of '{1}' is not valid for '{0}'. '{0}' should be greater than or equal to {2} and less than or equal to {3}.";
Loaded 100 of 481 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.