Compare commits

..
1 Commits
Author SHA1 Message Date
nobody 8466b5c35a This commit was manufactured by cvs2svn to create tag 'MONO_0_19'.
svn path=/tags/MONO_0_19/mono/; revision=10730
2003-01-20 13:24:10 +00:00
39263 changed files with 519012 additions and 6914870 deletions

No files matched your search

+17
View File
@@ -0,0 +1,17 @@
aclocal.m4
config.cache
config.guess
config.h
config.h.in
config.log
config.status
config.sub
configure
libtool
ltmain.sh
ltconfig
Makefile
Makefile.in
mono-*.tar.gz
stamp-h
stamp-h.in
-4061
View File
File diff suppressed because it is too large. Load diff
-116
View File
@@ -1,116 +0,0 @@
Mono is made up of many pieces of code, all of them open source, but
different pieces of Mono use different licensing terms.
For comments, corrections and updates, please contact [email protected]
* Dual Licensing
Parts of Mono are dual licensed, they are available to the
public in GPL or LGPL forms, but we also offer those pieces
under commercial terms from Novell for when the GPL and the
LGPL are not suitable.
We have tried to pick the licenses that will maximize adoption
of Mono, so we tend to use the MIT X11 or LGPL liceses.
Contributions to dual-licensed module require that the author
contributes the code under the terms of the MIT X11 code, or
to sign an agreement that allows Novell to redistribute the
code under other licenses.
Contributions for other modules should be under the same license
terms as the rest of the module, or under MIT X11 terms.
If you need further information, please contact [email protected]
* The Modules
** mono/mono: the Mono VM
This code is dual licensed under the LGPL or commercial licenses.
The LGPL ensures that Mono can be used in most scenarios, but
gives Novell the flexibility to relicense the code for
embedded systems, static linking or commercial settings where
the LGPL can not be used.
We consider non-LGPL use instances where you use this on an
embedded system where the end user is not able to upgrade the
Mono VM or Moonlight installation or distribution that is part
of your product (Section 6 and 7), you would have to obtain a
commercial license from Novell (consider software burned into
a ROM, systems where end users would not be able to upgrade,
an embedded console, a game console that imposes limitations
on the distribution and access to the code, a phone platform
that prevents end users from upgrading Moonlight).
Contact [email protected] for details on obtaining the Mono
runtime under other terms.
** mono/eglib: Mono's X11 glib implementation
This is a minimal subset of glib that is to be licensed under
the terms of the MIT X11, this means that this code can be
used for any purposes by anyone.
** mcs/mcs, mcs/gmcs
The C# Compilers (1.0 and 2.0)
These compilers are dual licensed under the GPL and MIT X11
license terms.
** tests
Unless explicitly stated, the tests are under the MIT X11 license.
** mcs/class
The class libraries developed by the Mono team are licensed
under the MIT X11 terms.
In addition to the class libraries developed by the Mono team,
there are a number of class libraries that we bundle as part
of the distribution that were integrated from third-parties or
that contain code that was originally licensed under different
terms, these are:
ByteFX.Data: LGPL
Npgsql: LGPL
FirebirdSql.Data.Firebird: Firebird public license.
See: mcs/class/FirebirdSql.Data.Firebird/license.txt
ICSharpCode.SharpZipLib, GPL with exceptions.
See: mcs/class/ICSharpCode.SharpZipLib/README
** mcs/tools
These are licensed under the MIT X11 license, except where the
GPL is explicitly used.
** mcs/jay
This is a port of Berkeley yacc, so it is available under the BSD
license. See the license in the individual C files for details.
** mono/man
Manual pages and Mono documentation are covered by the MIT X11 license.
* samples
The code in the "samples" directory is released under the MIT X11 license.
* The Licenses
These are the licenses used in Mono, the files are located:
GNU GPL: details avaliable in the file mcs/LICENSE.GPL
GNU LGPL: details available in the file mcs/LICENSE.LGPL
MIT X11: text available in the file mcs/MIT.X11
MPL: text available in the file mcs/LICENSE.MPL
+4 -83
View File
@@ -1,88 +1,9 @@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I .
SUBDIRS = po $(libgc_dir) $(eglib_dir) mono $(ikvm_native_dir) support data runtime scripts man samples web msvc docs
SUBDIRS = mono doc docs runtime scripts man data
# Keep in sync with SUBDIRS
## 'tools' is not normally built
DIST_SUBDIRS = po libgc $(eglib_dir) mono ikvm-native support data runtime scripts man samples web tools msvc docs
EXTRA_DIST= nls.m4 po.m4 progtest.m4 mono-uninstalled.pc.in build-mingw32.sh LICENSE mkinstalldirs
DISTCHECK_CONFIGURE_FLAGS = EXTERNAL_MCS=false EXTERNAL_RUNTIME=false
# Distribute the 'mcs' tree too
dist-hook:
test -d $(distdir)/mcs || mkdir $(distdir)/mcs
d=`cd $(distdir)/mcs && pwd`; cd $(mcs_topdir) && $(MAKE) PROFILE=net_1_1 distdir=$$d dist-recursive
d=`cd $(distdir)/mcs && pwd`; cd $(mcs_topdir) && $(MAKE) PROFILE=net_2_0 distdir=$$d dist-recursive
EXTRA_DIST= mono.pc.in mono.spec.in
pkgconfigdir = $(libdir)/pkgconfig
noinst_DATA = mono-uninstalled.pc
DISTCLEANFILES= mono-uninstalled.pc
.PHONY: get-monolite-latest mcs-do-compiler-tests compiler-tests bootstrap-world
# building with monolite
mcslib = $(mcs_topdir)/class/lib
monolite = $(mcslib)/monolite
monolite_url = http://mono.ximian.com/daily/monolite-latest.tar.gz
get-monolite-latest:
-rm -fr $(mcslib)/monolite-*
-mkdir -p $(mcslib)
test ! -d $(monolite) || test ! -d $(monolite).old || rm -fr $(monolite).old
test ! -d $(monolite) || mv -f $(monolite) $(monolite).old
cd $(mcslib) && { (wget -O- $(monolite_url) || curl $(monolite_url)) | gzip -d | tar xf - ; }
cd $(mcslib) && mv -f monolite-* monolite
compiler-tests: mcs-do-clean
$(MAKE) all
$(MAKE) mcs-do-compiler-tests
compiler-tests-net_2_0:
-rm -f $(mcs_topdir)/build/common/Consts.cs.save
-mv -f $(mcs_topdir)/build/common/Consts.cs $(mcs_topdir)/build/common/Consts.cs.save
cd $(mcs_topdir) && $(MAKE) PROFILE=net_2_0_bootstrap clean
cd $(mcs_topdir) && $(MAKE) PROFILE=net_2_0 clean
-mv -f $(mcs_topdir)/build/common/Consts.cs.save $(mcs_topdir)/build/common/Consts.cs
$(MAKE) all
$(MAKE) build_profiles=net_2_0 mcs-do-compiler-tests
bootstrap-world: compiler-tests
$(MAKE) install
bootstrap-world-net_2_0: compiler-tests-net_2_0
$(MAKE) install
# internal targets
mcs-do-clean:
cd runtime && $(MAKE) clean-local
cd mono/tests && $(MAKE) clean
mcs-do-compiler-tests:
cd runtime && $(MAKE) test_select='TEST_SUBDIRS="tests errors"' check-local
cd mono/tests && $(MAKE) check
win32getdeps:
wget http://www.go-mono.com/archive/pkgconfig-0.11-20020310.zip
wget http://www.go-mono.com/archive/glib-2.0.4-20020703.zip
wget http://www.go-mono.com/archive/glib-dev-2.0.4-20020703.zip
wget http://www.go-mono.com/archive/libiconv-1.7.zip
wget http://www.go-mono.com/archive/libiconv-dev-1.7.zip
wget http://www.go-mono.com/archive/libintl-0.10.40-20020101.zip
unzip -n -d / pkgconfig-0.11-20020310.zip
unzip -n -d / glib-2.0.4-20020703.zip
unzip -n -d / glib-dev-2.0.4-20020703.zip
unzip -n -d / libiconv-1.7.zip
unzip -n -d / libiconv-dev-1.7.zip
unzip -n -d / libintl-0.10.40-20020101.zip
win32setup:
makensis /DMILESTONE=$(VERSION) /DSOURCE_INSTALL_DIR=$(SOURCE_INSTALL_DIR) /DBUILDNUM=$(BUILDNUM) monowiz.win32.nsi
bootstrap: all
@echo "*** 'make bootstrap' is obsolete. Just run 'make' to perform a combined mono+mcs build"
exit 1
patch-quiet:
find mono -name Makefile -exec scripts/patch-quiet.sh {} \;
find libgc -name Makefile -exec scripts/patch-quiet.sh {} \;
pkgconfig_DATA= mono.pc
DISTCLEANFILES= mono.pc
+1076 -4
View File
File diff suppressed because it is too large. Load diff
+12 -449
View File
@@ -1,432 +1,22 @@
This is Mono.
1. Installation
2. Using Mono
3. Directory Roadmap
Installation:
1. Compilation and Installation
===============================
Read doc/download for installation instructions,
or read the HTML version:
a. Build Requirements
---------------------
http://www.go-mono.com/download.html
To build Mono, you will need the following components:
* pkg-config
Available from: http://www.freedesktop.org/Software/pkgconfig
* glib 2.4
Available from: http://www.gtk.org/
On Itanium, you must obtain libunwind:
http://www.hpl.hp.com/research/linux/libunwind/download.php4
On Solaris, make sure that you used GNU tar to unpack this package, as
Solaris tar will not unpack this correctly, and you will get strange errors.
On Solaris, make sure that you use the GNU toolchain to build the software.
Optional dependencies:
* libgdiplus
If you want to get support for System.Drawing, you will need to get
Libgdiplus.
* libzlib
This library and the development headers are required for compression
file support in the 2.0 profile.
b. Building the Software
------------------------
If you obtained this package as an officially released tarball,
this is very simple, use configure and make:
./configure --prefix=/usr/local
make
make install
Mono supports a JIT engine on x86, SPARC, SPARCv9, S/390,
S/390x, AMD64, ARM and PowerPC systems.
If you obtained this as a snapshot, you will need an existing
Mono installation. To upgrade your installation, unpack both
mono and mcs:
tar xzf mcs-XXXX.tar.gz
tar xzf mono-XXXX.tar.gz
mv mono-XXX mono
mv mcs-XXX mcs
cd mono
./autogen.sh --prefix=/usr/local
make
The Mono build system is silent for most compilation commands.
To enable a more verbose compile (for example, to pinpoint
problems in your makefiles or your system) pass the V=1 flag to make, like this:
make V=1
c. Building the software from SVN
---------------------------------
If you are building the software from SVN, make sure that you
have up-to-date mcs and mono sources:
svn co svn+ssh://[email protected]/source/trunk/mono
svn co svn+ssh://[email protected]/source/trunk/mcs
Then, go into the mono directory, and configure:
cd mono
./autogen.sh --prefix=/usr/local
make
For people with non-standard installations of the auto* utils and of
pkg-config (common on misconfigured OSX and windows boxes), you could get
an error like this:
./configure: line 19176: syntax error near unexpected token `PKG_CHECK_MODULES(BASE_DEPENDENCIES,' ...
This means that you need to set the ACLOCAL_FLAGS environment var
when invoking autogen.sh, like this:
ACLOCAL_FLAGS="-I $acprefix/share/aclocal" ./autogen.sh --prefix=/usr/loca
where $acprefix is the prefix where aclocal has been installed.
This will automatically go into the mcs/ tree and build the
binaries there.
This assumes that you have a working mono installation, and that
there's a C# compiler named 'mcs', and a corresponding IL
runtime called 'mono'. You can use two make variables
EXTERNAL_MCS and EXTERNAL_RUNTIME to override these. e.g., you
can say
make EXTERNAL_MCS=/foo/bar/mcs EXTERNAL_RUNTIME=/somewhere/else/mono
If you don't have a working Mono installation
---------------------------------------------
If you don't have a working Mono installation, an obvious choice
is to install the latest released packages of 'mono' for your
distribution and running autogen.sh; make; make install in the
mono module directory.
You can also try a slightly more risky approach: this may not work,
so start from the released tarball as detailed above.
This works by first getting the latest version of the 'monolite'
distribution, which contains just enough to run the 'mcs'
compiler. You do this with:
make get-monolite-latest
This will download and automatically gunzip and untar the
tarball, and place the files appropriately so that you can then
just run:
make
To ensure that you're using the 'monolite' distribution, you can
also try passing EXTERNAL_MCS=false on the make command-line.
Testing and Installation
------------------------
You can run (part of) the mono and mcs testsuites with the command:
make check
All tests should pass.
If you want more extensive tests, including those that test the
class libraries, you need to re-run 'configure' with the
'--enable-nunit-tests' flag, and try
make -k check
Expect to find a few testsuite failures. As a sanity check, you
can compare the failures you got with
http://go-mono.com/tests/displayTestResults.php
You can now install mono with:
make install
Failure to follow these steps may result in a broken installation.
d. Common Configuration Options
-------------------------------
The following are the configuration options that someone
building Mono might want to use:
--with-gc=[boehm, included, sgen, none]
Selects the garbage collector engine to use, the
default is the "included" value.
included:
This is the default value, and its
the most feature complete, it will allow Mono
to use typed allocations and support the
debugger.
It is essentially a slightly modified Boehm GC
boehm:
This is used to use a system-install Boehm GC,
it is useful to test new features available in
Boehm GC, but we do not recommend that people
use this, as it disables a few features.
sgen:
The under-development Generational GC for
Mono, do not use this in production.
none:
Disables the inclusion of a garbage
collector.
--with-tls=__thread,pthread
Controls how Mono should access thread local storage,
pthread forces Mono to use the pthread APIs, while
__thread uses compiler-optimized access to it.
Although __thread is faster, it requires support from
the compiler, kernel and libc. Old Linux systems do
not support with __thread.
This value is typically pre-configured and there is no
need to set it, unless you are trying to debug a
problem.
--with-sigaltstack=yes,no
Experimental: Use at your own risk, it is known to
cause problems with garbage collection and is hard to
reproduce those bugs.
This controls whether Mono will install a special
signal handler to handle stack overflows. If set to
"yes", it will turn stack overflows into the
StackOverflowException. Otherwise when a stack
overflow happens, your program will receive a
segmentation fault.
The configure script will try to detect if your
operating system supports this. Some older Linux
systems do not support this feature, or you might want
to override the auto-detection.
--with-static_mono=yes,no
This controls whether `mono' should link against a
static library (libmono.a) or a shared library
(libmono.so).
This defaults to yes, and will improve the performance
of the `mono' program.
This only affects the `mono' binary, the shared
library libmono.so will always be produced for
developers that want to embed the runtime in their
application.
--with-xen-opt=yes,no
The default value for this is `yes', and it makes Mono
generate code which might be slightly slower on
average systems, but the resulting executable will run
faster under the Xen virtualization system.
--with-large-heap=yes,no
Enable support for GC heaps larger than 3GB.
This value is set to `no' by default.
--with-ikvm-native=yes,no
Controls whether the IKVM JNI interface library is
built or not. This is used if you are planning on
using the IKVM Java Virtual machine with Mono.
This defaults to `yes'.
--with-preview=yes,no
Whether you want to build libraries that are still not
completed (The 2.0 APIs). It defaults to `yes'.
--with-moonlight=yes,no
Whether you want to generate the Silverlight/Moonlight
libraries and toolchain in addition to the default
(1.1 and 2.0 APIs).
This will produce the `smcs' compiler which will reference
the Silvelright modified assemblies (mscorlib.dll,
System.dll, System.Code.dll and System.Xml.Core.dll) and turn
on the LINQ extensions for the compiler.
This option defaults to `no' and it is considered pre-alpha.
--with-libgdiplus=installed,sibling,<path>
This is used to configure where should Mono look for
libgdiplus when running the System.Drawing tests.
It defaults to `installed', which means that the
library is available to Mono through the regular
system setup.
`sibling' can be used to specify that a libgdiplus
that resides as a sibling of this directory (mono)
should be used.
Or you can specify a path to a libgdiplus.
--disable-shared-memory
Use this option to disable the use of shared memory in
Mono (this is equivalent to setting the MONO_DISABLE_SHM
environment variable, although this removes the feature
completely).
Disabling the shared memory support will disable certain
features like cross-process named mutexes.
--enable-minimal=LIST
Use this feature to specify optional runtime
components that you might not want to include. This
is only useful for developers embedding Mono that
require a subset of Mono functionality.
The list is a comma-separated list of components that
should be removed, these are:
aot:
Disables support for the Ahead of Time
compilation.
com:
Disables COM support.
debug:
Drop debugging support.
decimal:
Disables support for System.Decimal.
generics:
Generics support. Disabling this will not
allow Mono to run any 2.0 libraries or
code that contains generics.
jit:
Removes the JIT engine from the build, this reduces
the executable size, and requires that all code
executed by the virtual machine be compiled with
Full AOT before execution.
large_code:
Disables support for large assemblies.
logging:
Disables support for debug logging.
pinvoke:
Support for Platform Invocation services,
disabling this will drop support for any
libraries using DllImport.
profiler:
Disables support for the default profiler.
reflection_emit:
Drop System.Reflection.Emit support
reflection_emit_save:
Drop support for saving dynamically created
assemblies (AssemblyBuilderAccess.Save) in
System.Reflection.Emit.
simd:
Disables support for the Mono.SIMD intrinsics
library.
ssa:
Disables compilation for the SSA optimization
framework, and the various SSA-based
optimizations.
--enable-big-arrays
This enables the use arrays whose indexes are larger
than Int32.MaxValue.
By default Mono has the same limitation as .NET on
Win32 and Win64 and limits array indexes to 32-bit
values (even on 64-bit systems).
In certain scenarios where large arrays are required,
you can pass this flag and Mono will be built to
support 64-bit arrays.
This is not the default as it breaks the C embedding
ABI that we have exposed through the Mono development
cycle.
--enable-parallel-mark
Use this option to enable the garbage collector to use
multiple CPUs to do its work. This helps performance
on multi-CPU machines as the work is divided across CPUS.
This option is not currently the default as we have
not done much testing with Mono.
--enable-dtrace
On Solaris and MacOS X builds a version of the Mono
runtime that contains DTrace probes and can
participate in the system profiling using DTrace.
--disable-dev-random
Mono uses /dev/random to obtain good random data for
any source that requires random numbers. If your
system does not support this, you might want to
disable it.
There are a number of runtime options to control this
also, see the man page.
2. Using Mono
=============
* Using Mono
Once you have installed the software, you can run a few programs:
* runtime engine
mono program.exe
or
mint program.exe
* C# compiler
@@ -439,14 +29,10 @@ This is Mono.
See the man pages for mono(1), mint(1), monodis(1) and mcs(2)
for further details.
3. Directory Roadmap
====================
* A directory roadmap:
docs/
Technical documents about the Mono runtime.
data/
Configuration files installed as part of the Mono runtime.
doc/
Contains documentation and the web site contents.
mono/
The core of the Mono Runtime.
@@ -454,7 +40,7 @@ This is Mono.
metadata/
The object system and metadata reader.
mini/
jit/
The Just in Time Compiler.
dis/
@@ -472,32 +58,9 @@ This is Mono.
definition of the CIL bytecodes.
interp/
Interpreter for CLI executables (obsolete).
Interpreter for CLI executables.
arch/
Architecture specific portions.
man/
Manual pages for the various Mono commands and programs.
samples/
Some simple sample programs on uses of the Mono
runtime as an embedded library.
scripts/
Scripts used to invoke Mono and the corresponding program.
runtime/
A directory that contains the Makefiles that link the
mono/ and mcs/ build systems.
../olive/
If the directory ../olive is present (as an
independent checkout) from the Mono module, that
directory is automatically configured to share the
same prefix than this module gets.
-120
View File
@@ -1,120 +0,0 @@
README.vsnet Last updated: 2006-02-01
SVN includes a Visual Studio .NET 2005 solution, mono.sln, and some
projects files to build most of the unmanaged parts in Mono.
The "mono.sln" solution file contains the VC projects files for:
* Embedded Samples
* test-invoke.vcproj
* test-metadata.vcproj
* teste.vcproj
* Libraries
* libgc.vcproj
* libmono.vcproj
* Tools
* genmdesc.vcproj
* monoburg.vcproj
* monodiet.vcproj
* monodis.vcproj
* monograph.vcproj
* pedump.vcproj
* mono.vcproj
REQUIREMENTS
* A working (i.e. where you could succesfully build mono) cygwin
(http://www.cygwin.com/) setup! This is required to:
* generate some files (via monoburg and genmdesc);
* build the class libraries; and
* test for regressions.
* Visual Studio .NET 2005. Previous Visual Studio versions may work or
requires, hopefully minimal, changes.
* VSDependencies.zip must be decompressed under the /mono/ directory
(otherwise you will need to edit all the projects files). This file can
be downloaded from http://www.go-mono.com/archive/VSDependencies.zip
LOCAL CHANGES
Sadly solution/projects files aren't easy to move from computers to
computers (well unless everyone follow the same naming convention) so
you'll likely have to changes some options in order to compile the
solution.
* each executed assembly (i.e. the EXE) must be able to find a
working mscorlib.dll (and all the other required assemblies).
This can be done in different ways. My preference is to use the
project "properties pages" in the "Configuration Properties
\Debugging\Environment" options and set MONO_PATH to the class
libraries directory build by cygwin (local) or on Linux
(remote).
e.g. MONO_PATH=z:\svn\mcs\class\lib\default\
allows me to use the class libs build under Linux, while
MONO_PATH=C:\cygwin\opt\mono\lib\mono\1.0
use the one built from cygwin (after a make install)
Some useful informations to adapt the solution/project files...
* My cygwin root dir is: c:\cygwin\
* My username is: poupou
* My mono install prefix is: /opt/mono
BUILDING
Once everything is installed (and edited) you can right-click on the
"mono" solution (in the "Solution Explorer"), select "Clean
Solution" (for the first time) then "Build Solution".
KNOWN ISSUES
[1] Most, BUT NOT ALL, the regressions tests pass under this build. The
failures seems limited to some mathematical differences and to code
relying on the stack walking functions. The hacks to replace the GCC
functions (__builtin_frame_address and __builtin_return_address) are
incomplete;
[2] The solution doesn't provide complete (i.e. from scratch) build. It
requires a working cygwin environment to create some files (e.g. via
genmdesc, monoburg). This isn't so bad as without cygwin you wouldn't be
able to test Mono properly (see REQUIREMENTS);
[3] Only the Debug target is configured properly (that would be easy to
fix, but would require turning off some optimizations like omitting
stack frames). Anyway there are other issues [1] to fix before switching
to Release and IMHO the _biggest_ advantage to VS.NET is it's debugger/
debugging tools;
[4] The C compiler emits _lots_ of warning during compilation. Some
warnings have been turned off for some projects (there was so much that
it slowed down compilation). You can bring them back (or hide more of
them) using the project "properties pages" windows, "Configuration
Properties\C/C++\Advanced\Disable Specific Warnings";
[5] Visual Studio 2005 should have all the latest header files required,
but if not (or if you're using an older version of VS) then install MS
Platform SDK (Windows Server 2003 is the latest) to ensure you have the
latest Windows header files. You can download it from:
http://www.microsoft.com/msdownload/platformsdk/sdkupdate/psdk-full.htm
[6] Not everyone has VS.NET so it is possible you may have to add some
(new) files to the build from time to time. See "more informations" for
reporting those changes.
[7] Probably a lot more I didn't discover... or has changed since.
MORE INFORMATION
Please email <[email protected]> if you have any problem
and/or if there's something wrong/missing in the instructions.
An online version of this file is available at
http://www.mono-project.com/Compiling_Mono_VSNET
+21
View File
@@ -0,0 +1,21 @@
#undef HAVE_INET_PTON
#undef HAVE_INET_ATON
#undef HAVE_MSG_NOSIGNAL
#undef HAVE_SOL_IP
#undef HAVE_SOL_TCP
#undef HAVE_IP_PKTINFO
#undef HAVE_STRUCT_IP_MREQN
#undef HAVE_PTHREAD_MUTEX_TIMEDLOCK
#undef USE_MONO_MUTEX
#undef HAVE_LARGE_FILE_SUPPORT
#undef PLATFORM_WIN32
#undef HAVE_NEW_ICONV
#undef NAME_DEV_RANDOM
#undef HAVE_CRYPT_RNG
#undef HAVE_BOEHM_GC
#undef DISABLE_SHARED_HANDLES
#undef HAVE_TIMEZONE
#undef HAVE_TM_GMTOFF
#undef MONO_SIZEOF_SUNPATH
#undef NEED_LINK_UNLINK
#undef PTHREAD_POINTER_ID
-178
View File
@@ -1,178 +0,0 @@
dnl dolt, a replacement for libtool
dnl Copyright © 2007-2008 Josh Triplett <[email protected]>
dnl Copying and distribution of this file, with or without modification,
dnl are permitted in any medium without royalty provided the copyright
dnl notice and this notice are preserved.
dnl
dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
dnl installed when running autoconf on your project.
AC_DEFUN([DOLT], [
AC_REQUIRE([AC_CANONICAL_HOST])
# dolt, a replacement for libtool
# Josh Triplett <[email protected]>
AC_PATH_PROG(DOLT_BASH, bash)
AC_MSG_CHECKING([if dolt supports this host])
dolt_supported=yes
if test x$DOLT_BASH = x; then
dolt_supported=no
fi
if test x$GCC != xyes; then
dolt_supported=no
fi
case $host in
i?86-*-linux*|x86_64-*-linux*|powerpc-*-linux* \
|amd64-*-freebsd*|i?86-*-freebsd*|ia64-*-freebsd*|arm*-*-linux*)
pic_options='-fPIC'
;;
i?86-apple-darwin*)
pic_options='-fno-common'
;;
*)
dolt_supported=no
;;
esac
if test x$dolt_supported = xno ; then
AC_MSG_RESULT([no, falling back to libtool])
LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
else
AC_MSG_RESULT([yes, replacing libtool])
dnl Start writing out doltcompile.
cat <<__DOLTCOMPILE__EOF__ >doltcompile
#!$DOLT_BASH
__DOLTCOMPILE__EOF__
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
args=("$[]@")
for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
if test x"${args@<:@$arg@:>@}" = x-o ; then
objarg=$((arg+1))
break
fi
done
if test x$objarg = x ; then
echo 'Error: no -o on compiler command line' 1>&2
exit 1
fi
lo="${args@<:@$objarg@:>@}"
obj="${lo%.lo}"
if test x"$lo" = x"$obj" ; then
echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
exit 1
fi
objbase="${obj##*/}"
__DOLTCOMPILE__EOF__
dnl Write out shared compilation code.
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
libobjdir="${obj%$objbase}.libs"
if test ! -d "$libobjdir" ; then
mkdir_out="$(mkdir "$libobjdir" 2>&1)"
mkdir_ret=$?
if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
echo "$mkdir_out" 1>&2
exit $mkdir_ret
fi
fi
pic_object="$libobjdir/$objbase.o"
args@<:@$objarg@:>@="$pic_object"
__DOLTCOMPILE__EOF__
cat <<__DOLTCOMPILE__EOF__ >>doltcompile
"\${args@<:@@@:>@}" $pic_options -DPIC || exit \$?
__DOLTCOMPILE__EOF__
fi
dnl Write out static compilation code.
dnl Avoid duplicate compiler output if also building shared objects.
if test x$enable_static = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
non_pic_object="$obj.o"
args@<:@$objarg@:>@="$non_pic_object"
__DOLTCOMPILE__EOF__
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" >/dev/null 2>&1 || exit $?
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" || exit $?
__DOLTCOMPILE__EOF__
fi
fi
dnl Write out the code to write the .lo file.
dnl The second line of the .lo file must match "^# Generated by .*libtool"
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
{
echo "# $lo - a libtool object file"
echo "# Generated by doltcompile, not libtool"
__DOLTCOMPILE__EOF__
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "pic_object='.libs/${objbase}.o'"
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo pic_object=none
__DOLTCOMPILE__EOF__
fi
if test x$enable_static = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "non_pic_object='${objbase}.o'"
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo non_pic_object=none
__DOLTCOMPILE__EOF__
fi
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
} > "$lo"
__DOLTCOMPILE__EOF__
dnl Done writing out doltcompile; substitute it for libtool compilation.
chmod +x doltcompile
LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
dnl automake ignores LTCOMPILE and LTCXXCOMPILE when it has separate CFLAGS for
dnl a target, so write out a libtool wrapper to handle that case.
dnl Note that doltlibtool does not handle inferred tags or option arguments
dnl without '=', because automake does not use them.
cat <<__DOLTLIBTOOL__EOF__ > doltlibtool
#!$DOLT_BASH
__DOLTLIBTOOL__EOF__
cat <<'__DOLTLIBTOOL__EOF__' >>doltlibtool
top_builddir_slash="${0%%doltlibtool}"
: ${top_builddir_slash:=./}
args=()
modeok=false
tagok=false
for arg in "$[]@"; do
case "$arg" in
--mode=compile) modeok=true ;;
--tag=CC|--tag=CXX) tagok=true ;;
--quiet) ;;
*) args@<:@${#args[@]}@:>@="$arg" ;;
esac
done
if $modeok && $tagok ; then
. ${top_builddir_slash}doltcompile "${args@<:@@@:>@}"
else
exec ${top_builddir_slash}libtool "$[]@"
fi
__DOLTLIBTOOL__EOF__
dnl Done writing out doltlibtool; substitute it for libtool.
chmod +x doltlibtool
LIBTOOL='$(top_builddir)/doltlibtool'
fi
AC_SUBST(LTCOMPILE)
AC_SUBST(LTCXXCOMPILE)
# end dolt
])
+5 -18
View File
@@ -30,15 +30,8 @@ fi
DIE=1
}
if [ -z "$LIBTOOL" ]; then
LIBTOOL=`which glibtool 2>/dev/null`
if [ ! -x "$LIBTOOL" ]; then
LIBTOOL=`which libtool`
fi
fi
(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && {
($LIBTOOL --version) < /dev/null > /dev/null 2>&1 || {
(libtool --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`libtool' installed to compile Mono."
echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.2d.tar.gz"
@@ -82,7 +75,7 @@ if test "$DIE" -eq 1; then
exit 1
fi
if test x$NOCONFIGURE = x && test -z "$*"; then
if test -z "$*"; then
echo "**Warning**: I am going to run \`configure' with no arguments."
echo "If you wish to pass any to it, please specify them on the"
echo \`$0\'" command line."
@@ -98,12 +91,12 @@ esac
if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then
if test -z "$NO_LIBTOOLIZE" ; then
echo "Running libtoolize..."
${LIBTOOL}ize --force --copy
libtoolize --force --copy
fi
fi
echo "Running aclocal -I . $ACLOCAL_FLAGS ..."
aclocal -I . $ACLOCAL_FLAGS || {
echo "Running aclocal $ACLOCAL_FLAGS ..."
aclocal $ACLOCAL_FLAGS || {
echo
echo "**Error**: aclocal failed. This may mean that you have not"
echo "installed all of the packages you need, or you may need to"
@@ -124,12 +117,6 @@ automake --add-missing --gnu $am_opt ||
echo "Running autoconf ..."
autoconf || { echo "**Error**: autoconf failed."; exit 1; }
if test -d $srcdir/libgc; then
echo Running libgc/autogen.sh ...
(cd $srcdir/libgc ; NOCONFIGURE=1 ./autogen.sh "$@")
echo Done running libgc/autogen.sh ...
fi
conf_flags="--enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c
-64
View File
@@ -1,64 +0,0 @@
#!/bin/sh
ASPEN_ROOT=/Developer/Platforms/iPhoneOS.platform/Developer
ASPEN_SDK=$ASPEN_ROOT/SDKs/iPhoneOS2.0.sdk/
ORIG_PATH=$PATH
GLIB_FLAGS=`pkg-config --cflags --libs glib-2.0`
if [ -z "$GLIB_FLAGS" ]; then
echo "pkg-config could not locate glib-2.0 needed for the monoburg step"
exit;
fi
setenv () {
export PATH=$ASPEN_ROOT/usr/bin:$PATH
export C_INCLUDE_PATH="$ASPEN_SDK/usr/lib/gcc/arm-apple-darwin9/4.0.1/include:$ASPEN_SDK/usr/include"
export CPLUS_INCLUDE_PATH="$ASPEN_SDK/usr/lib/gcc/arm-apple-darwin9/4.0.1/include:$ASPEN_SDK/usr/include"
export CC=arm-apple-darwin9-gcc-4.0.1
export CXX=arm-apple-darwin9-g++-4.0.1
export CPP="cpp-4.0 -nostdinc -U__powerpc__ -U__i386__ -D__arm__"
export CXXPP="cpp-4.0 -nostdinc -U__powerpc__ -U__i386__ -D__arm__"
export LD=$CC
export LDFLAGS="-liconv -Wl,-syslibroot,$ASPEN_SDK"
}
unsetenv () {
export PATH=$ORIG_PATH
unset C_INCLUDE_PATH
unset CPLUS_INCLUDE_PATH
unset CC
unset CXX
unset CPP
unset CXXPP
unset LD
unset LDFLAGS
}
export mono_cv_uscore=yes
export cv_mono_sizeof_sunpath=104
export ac_cv_func_posix_getpwuid_r=yes
export ac_cv_func_backtrace_symbols=no
setenv
pushd eglib
./autogen.sh --host=arm-apple-darwin9
popd
./autogen.sh --disable-mcs-build --host=arm-apple-darwin9 --disable-shared-handles --with-tls=pthread --with-sigaltstack=no --with-glib=embedded $@
perl -pi -e 's/MONO_SIZEOF_SUNPATH 0/MONO_SIZEOF_SUNPATH 104/' config.h
perl -pi -e 's/#define HAVE_FINITE 1//' config.h
perl -pi -e 's/#define HAVE_MMAP 1//' config.h
make
unsetenv
pushd mono/monoburg
/usr/bin/gcc -o monoburg ./monoburg.c parser.c -I../.. -pthread -lm $GLIB_FLAGS
make
popd
setenv
make
-110
View File
@@ -1,110 +0,0 @@
#!/bin/bash -e
CURDIR="`pwd`"
CROSS_DIR=${1:-/opt/cross/}
MINGW=${1:-i386-mingw32msvc}
CROSS_BIN_DIR="$CROSS_DIR/bin"
CROSS_DLL_DIR="$CROSS_DIR/$MINGW/bin"
CROSS_PKG_CONFIG_DIR=$CROSS_DIR/$MINGW/lib/pkgconfig
COPY_DLLS="libgio*.dll libglib*.dll libgmodule*.dll libgthread*.dll libgobject*.dll"
PATH=$CROSS_BIN_DIR:$PATH
INSTALL_DESTDIR="$CURDIR/mono-win32"
PROFILES="default net_2_0 net_2_1 net_3_5"
export PATH
function setup ()
{
if [ -d ./.git/svn ]; then
SVN_INFO='git svn info'
elif [ -d ./.svn ]; then
SVN_INFO='svn info'
else
SVN_INFO=""
fi
if [ -n "$SVN_INFO" ]; then
MONO_SVN_REVISION=`$SVN_INFO | grep Revision | sed 's/.*: //'`
MONO_BRANCH=`$SVN_INFO | grep URL | sed -e 's;.*source/;;g' -e 's;/mono;;g'`
else
MONO_SVN_REVISION="rUNKNOWN"
MONO_BRANCH="tarball"
fi
MONO_VERSION=`grep AM_INIT_AUTOMAKE configure.in | cut -d ',' -f 2|tr -d '\)'`
MONO_RELEASE="$MONO_VERSION-$MONO_BRANCH-r$MONO_SVN_REVISION"
MONO_PREFIX="/mono-$MONO_RELEASE"
NOCONFIGURE=yes
export NOCONFIGURE
echo Mono Win32 installation prefix: $MONO_PREFIX
}
function build ()
{
./autogen.sh
if [ -f ./Makefile ]; then
make distclean
fi
if [ ! -d "$CURDIR/build-cross-windows" ]; then
mkdir "$CURDIR/build-cross-windows"
fi
cd "$CURDIR/build-cross-windows"
rm -rf *
../configure --prefix=$MONO_PREFIX --with-crosspkgdir=$CROSS_PKG_CONFIG_DIR --target=$MINGW --host=$MINGW --enable-parallel-mark --program-transform-name=""
make
cd "$CURDIR"
if [ ! -d "$CURDIR/build-cross-windows-mcs" ]; then
mkdir "$CURDIR/build-cross-windows-mcs"
fi
cd "$CURDIR/build-cross-windows-mcs"
rm -rf *
../configure --prefix=$MONO_PREFIX --enable-parallel-mark
make
}
function doinstall ()
{
if [ -d "$INSTALL_DIR" ]; then
rm -rf "$INSTALL_DIR"
fi
cd "$CURDIR/build-cross-windows"
make DESTDIR="$INSTALL_DESTDIR" USE_BATCH_FILES=yes install
cd "$CURDIR/../mcs/mcs"
for p in $PROFILES; do
make DESTDIR="$INSTALL_DESTDIR" PROFILE=$p install || echo "mcs profile $p installation failed"
done
cd "$CURDIR/../mcs/class"
for p in $PROFILES; do
make DESTDIR="$INSTALL_DESTDIR" PROFILE=$p install || echo "class library profile $p installation failed"
done
cd "$CURDIR/../mcs/tools"
for p in $PROFILES; do
make DESTDIR="$INSTALL_DESTDIR" PROFILE=$p install || echo "tools profile $p installation failed"
done
cd "$CURDIR/mono-win32"
for dll in $COPY_DLLS; do
cp -ap "$CROSS_DLL_DIR"/$dll "$INSTALL_DESTDIR/$MONO_PREFIX/bin"
done
rm -f "$CURDIR/mono-win32-$MONO_RELEASE".zip
zip -9r "$CURDIR/mono-win32-$MONO_RELEASE".zip .
}
pushd . > /dev/null
setup
build
doinstall
popd > /dev/null
+100 -2056
View File
File diff suppressed because it is too large. Load diff
+6 -27
View File
@@ -1,32 +1,11 @@
SUBDIRS = net_1_1 net_2_0
monodir = $(sysconfdir)/mono
EXTRA_DIST = \
config.in \
browscap.ini mono.supp mono.d README \
mono.pc.in mint.pc.in dotnet.pc.in dotnet35.pc.in wcf.pc.in monodoc.pc.in \
mono-nunit.pc.in mono-cairo.pc.in mono-options.pc.in cecil.pc.in smcs.pc.in \
mono-lineeditor.pc.in system.web.extensions_1.0.pc.in system.web.extensions.design_1.0.pc.in\
dtrace-prelink.sh
EXTRA_DIST = config.in machine.config
pkgconfigdir = $(libdir)/pkgconfig
mono_DATA = config machine.config
if JIT_SUPPORTED
if INTERP_SUPPORTED
pkgconfig_DATA= mono.pc mint.pc dotnet.pc dotnet35.pc wcf.pc mono-nunit.pc mono-cairo.pc mono-options.pc cecil.pc smcs.pc monodoc.pc mono-lineeditor.pc system.web.extensions_1.0.pc \
system.web.extensions.design_1.0.pc
else
pkgconfig_DATA= mono.pc dotnet.pc dotnet35.pc wcf.pc mono-nunit.pc mono-cairo.pc mono-options.pc cecil.pc smcs.pc monodoc.pc mono-lineeditor.pc system.web.extensions_1.0.pc \
system.web.extensions.design_1.0.pc
endif
else
pkgconfig_DATA= mint.pc mono-nunit.pc mono-cairo.pc mono-options.pc cecil.pc smcs.pc monodoc.pc mono-lineeditor.pc
endif
DISTCLEANFILES= mono.pc mint.pc dotnet.pc dotnet35.pc wcf.pc mono-nunit.pc mono-cairo.pc mono-options.pc cecil.pc smcs.pc monodoc.pc mono-lineeditor.pc system.web.extensions_1.0.pc \
system.web.extensions.design_1.0.pc
mono_DATA = config \
browscap.ini
DISTCLEANFILES = config
config: config.in Makefile
sed -e 's^\@LIBC\@^libc.so.6^g' < $(srcdir)/config.in > config.tmp \
&& mv config.tmp config
-25
View File
@@ -1,25 +0,0 @@
Files in this directory:
config.in, config:
These files are installed into $prefix/etc/mono and
contain the global mappings of dllnames into native
library names.
browscap.ini
This file contains the browser capabilty database,
this is used by ASP.NET to determine in a per-browser
basis what kind of features it can depend on when
producing the HTML code.
mono.d
This is a DTrace file listing available probes.
This is used by dtrace to generate a C header file,
and on Solaris for postprocessing object files.
mono.supp
This is a valgrind data file, it lists the warnings
that should be supressed when reporting Mono-related
errors.
net_1_1 and net_2_0
They contain profile-specific data files
-18608
View File
File diff suppressed because it is too large. Load diff
-7
View File
@@ -1,7 +0,0 @@
assemblies_dir=@prefix@/lib/mono
Libraries=${assemblies_dir}/gac/Mono.Cecil/0.6.9.0__0738eb9f132ed756/Mono.Cecil.dll
Name: Mono Internal -- Do not use.
Description: Mono Internal Libraries -- Do not use
Version: @VERSION@
Libs: -r:Mono.Cecil.dll
+12 -24
View File
@@ -1,26 +1,14 @@
<configuration>
<dllmap dll="i:cygwin1.dll" target="@LIBC@" os="!windows" />
<dllmap dll="libc" target="@LIBC@" os="!windows"/>
<dllmap dll="intl" target="@INTL@" os="!windows"/>
<dllmap dll="intl" name="bind_textdomain_codeset" target="@LIBC@" os="solaris"/>
<dllmap dll="libintl" name="bind_textdomain_codeset" target="@LIBC@" os="solaris"/>
<dllmap dll="libintl" target="@INTL@" os="!windows"/>
<dllmap dll="i:libxslt.dll" target="libxslt@libsuffix@" os="!windows"/>
<dllmap dll="i:odbc32.dll" target="libodbc@libsuffix@" os="!windows"/>
<dllmap dll="i:odbc32.dll" target="libiodbc.dylib" os="osx"/>
<dllmap dll="oci" target="libclntsh@libsuffix@" os="!windows"/>
<dllmap dll="db2cli" target="libdb2_36@libsuffix@" os="!windows"/>
<dllmap dll="MonoPosixHelper" target="libMonoPosixHelper@libsuffix@" os="!windows" />
<dllmap dll="i:msvcrt" target="@LIBC@" os="!windows"/>
<dllmap dll="i:msvcrt.dll" target="@LIBC@" os="!windows"/>
<dllmap dll="sqlite" target="@SQLITE@" os="!windows"/>
<dllmap dll="sqlite3" target="@SQLITE3@" os="!windows"/>
<dllmap dll="libX11" target="@X11@" os="!windows" />
<dllmap dll="libcairo-2.dll" target="libcairo.so.2" os="!windows"/>
<dllmap dll="i:kernel32.dll">
<dllentry dll="__Internal" name="CopyMemory" target="mono_win32_compat_CopyMemory"/>
<dllentry dll="__Internal" name="FillMemory" target="mono_win32_compat_FillMemory"/>
<dllentry dll="__Internal" name="MoveMemory" target="mono_win32_compat_MoveMemory"/>
<dllentry dll="__Internal" name="ZeroMemory" target="mono_win32_compat_ZeroMemory"/>
</dllmap>
<dllmap dll="cygwin1.dll" target="@LIBC@" />
<dllmap dll="libc" target="@LIBC@" />
<dllmap dll="libxslt.dll" target="libxslt.so" />
<dllmap dll="libmySQL.dll" target="libmysqlclient.so" />
<dllmap dll="odbc32.dll" target="libodbc.so" />
<dllmap dll="libglib-2.0-0.dll" target="libglib-2.0.so" />
<dllmap dll="libgobject-2.0-0.dll" target="libgobject-2.0.so" />
<dllmap dll="libpango-1.0-0.dll" target="libpango-1.0.so" />
<dllmap dll="libatk-1.0-0.dll" target="libatk-1.0.so" />
<dllmap dll="libgdk-win32-2.0-0.dll" target="libgdk-x11-2.0.so" />
<dllmap dll="libgdk_pixbuf-2.0-0.dll" target="libgdk-pixbuf-2.0.so" />
<dllmap dll="libgtk-win32-2.0-0.dll" target="libgtk-x11-2.0.so" />
</configuration>
-5
View File
@@ -1,5 +0,0 @@
Name: Standard libraries in a .NET setup
Description: References all the standard .NET libraries for compilation
Version: @VERSION@
Libs: -r:Accessibility.dll -r:cscompmgd.dll -r:Microsoft.JScript.dll -r:Microsoft.VisualC.dll -r:Microsoft.Vsa.dll -r:System.Configuration.Install.dll -r:System.Data.dll -r:System.Data.OracleClient.dll -r:System.Design.dll -r:System.DirectoryServices.dll -r:System.dll -r:System.Drawing.Design.dll -r:System.Drawing.dll -r:System.EnterpriseServices.dll -r:System.Management.dll -r:System.Messaging.dll -r:System.Runtime.Remoting.dll -r:System.Runtime.Serialization.Formatters.Soap.dll -r:System.Security.dll -r:System.ServiceProcess.dll -r:System.Web.dll -r:System.Web.Services.dll -r:System.Windows.Forms.dll -r:System.Xml.dll
-5
View File
@@ -1,5 +0,0 @@
Name: Standard libraries in a .NET setup
Description: References all the standard .NET libraries for compilation (.NET Framework 3.5 compatibility)
Version: @VERSION@
Libs: -r:Accessibility.dll -r:cscompmgd.dll -r:Microsoft.JScript.dll -r:Microsoft.VisualC.dll -r:Microsoft.Vsa.dll -r:System.Configuration.Install.dll -r:System.Data.dll -r:System.Data.OracleClient.dll -r:System.Design.dll -r:System.DirectoryServices.dll -r:System.dll -r:System.Drawing.Design.dll -r:System.Drawing.dll -r:System.EnterpriseServices.dll -r:System.Management.dll -r:System.Messaging.dll -r:System.Runtime.Remoting.dll -r:System.Runtime.Serialization.Formatters.Soap.dll -r:System.Security.dll -r:System.ServiceProcess.dll -r:System.Web.dll -r:System.Web.Services.dll -r:System.Windows.Forms.dll -r:System.Xml.dll -r:System.Configuration.dll -r:System.Core.dll -r:System.Xml.Linq.dll -r:System.Data.DataSetExtensions.dll -r:System.Data.Linq.dll -r:System.Web.Abstractions.dll -r:System.Web.Routing.dll -r:System.Web.DynamicData.dll -r:System.ComponentModel.DataAnnotations.dll
-74
View File
@@ -1,74 +0,0 @@
#!/bin/sh
#
# dtrace-prelink.sh: DTrace helper script for Mono
#
# Authors:
# Andreas Faerber <[email protected]>
#
# Assume that PIC object files live in .libs/, non-PIC code in ./
PIC=no
if test "$1" = "--pic"; then
PIC=yes
shift
fi
OBJ="$1"
PROV="$2"
shift
shift
FILES="$*"
OBJS=
TMPDIR=.dtrace
mkdir -p "${TMPDIR}"
# Extract relevant object files to temporary directories
for FILE in ${FILES}; do
if echo "${FILE}" | grep .la > /dev/null; then
LIBDIR=`dirname ${FILE}`
LIB=".libs/`basename ${FILE} .la`.a"
DIR="${TMPDIR}/`basename ${FILE}`"
mkdir -p ${DIR}
(cd "${DIR}" && ${AR} x "../../${LIBDIR}/${LIB}")
TMPOBJS=`ls -1 "${DIR}"`
for TMPOBJ in ${TMPOBJS}; do
LO=`basename "${TMPOBJ}" .o`.lo
SRCOBJ="${TMPOBJ}"
if test x${PIC} = xyes; then
SRCOBJ=".libs/${SRCOBJ}"
fi
# Overwrite with original version
cp "${LIBDIR}/${SRCOBJ}" "${DIR}/${TMPOBJ}" || cp "${LIBDIR}/${TMPOBJ}" "${DIR}/${TMPOBJ}" || exit
# Add to list
OBJS="${OBJS} ${DIR}/${TMPOBJ}"
done
fi
if echo "${FILE}" | grep .lo > /dev/null; then
DIR=`dirname ${FILE}`
SRCOBJ=`basename ${FILE} .lo`.o
if test x${PIC} = xyes; then
SRCOBJ=".libs/${SRCOBJ}"
fi
OBJS="${OBJS} ${DIR}/${SRCOBJ}"
fi
done
# Run dtrace -G over the temporary objects
${DTRACE} -G ${DTRACEFLAGS} -s "${PROV}" -o "${OBJ}" ${OBJS} || exit
# Update the archives with the temporary, modified object files so that they are linked in
for FILE in ${FILES}; do
if echo "${FILE}" | grep .la > /dev/null; then
LIBDIR=`dirname ${FILE}`
LIB=".libs/`basename ${FILE} .la`.a"
DIR="${TMPDIR}/`basename ${FILE}`"
(cd "${DIR}" && ${AR} r "../../${LIBDIR}/${LIB}" *.o)
fi
# .lo files were modified in-place
done
rm -rf "${TMPDIR}"
-22
View File
@@ -1,22 +0,0 @@
2009-02-03 Zoltan Varga <[email protected]>
* mono-gdb.py: Remove the --64 argument to as, it is not needed.
* mono-gdb.py (stringify_class_name): Helper function to print base types
using their short name. Also add a prototype implementation of registering
the hooks from python code instead of needing the mono-gdbinit file.
* gdb-python.diff: Changes against the gdb archer branch at
http://sourceware.org/gdb/wiki/PythonGdb to fix some problems/add functionality.
2009-02-03 Geoff Norton <[email protected]>
* mono-gdbinit: Hook into backtrace as hook-stop seems to crash gdb
* mono-gdb.py: Find the gdbinit name from the executable name instead of
hardcoding mono
2009-01-29 Zoltan Varga <[email protected]>
* mono-gdb.py mono-gdbinit: Support files to help debugging mono/mono apps
using a python enabled gdb.
-163
View File
@@ -1,163 +0,0 @@
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 640998b..fb73e9d 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,10 @@
+2009-02-03 Zoltan Varga <[email protected]>
+
+ * cil-script.c python/python-cmd.c: Allow registration of pre/post hooks from
+ python.
+
+ * symfile.c (add_symbol_file_command): Comment out verbose messages.
+
2009-02-03 Thiago Jung Bauermann <[email protected]>
* gdb/c-lang.c (c_get_string): Remove superfluous parenthesis from
diff --git a/gdb/cli/cli-script.c b/gdb/cli/cli-script.c
index 835d29c..3941aa5 100644
--- a/gdb/cli/cli-script.c
+++ b/gdb/cli/cli-script.c
@@ -299,6 +299,13 @@ execute_user_command (struct cmd_list_element *c, char *args)
static int user_call_depth = 0;
extern int max_user_call_depth;
+ /* Might be a user defined command implemented in Python */
+ if (!c->user_commands && c->func)
+ {
+ (*c->func) (c, args, FALSE);
+ return;
+ }
+
old_chain = setup_user_args (args);
cmdlines = c->user_commands;
diff --git a/gdb/python/python-cmd.c b/gdb/python/python-cmd.c
index 61d5e5d..a3fbc08 100644
--- a/gdb/python/python-cmd.c
+++ b/gdb/python/python-cmd.c
@@ -339,7 +339,8 @@ gdbpy_parse_command_name (char *text, struct cmd_list_element ***base_list,
/* Object initializer; sets up gdb-side structures for command.
- Use: __init__(NAME, CMDCLASS, [COMPLETERCLASS, [PREFIX]]).
+ Use: __init__(NAME, CMDCLASS, [completerclass=COMPLETERCLASS, prefix=PREFIX,
+ pre_hook_of=PREHOOK_OF, post_hook_of=POSTHOOK_OF]).
NAME is the name of the command. It may consist of multiple words,
in which case the final word is the name of the new command, and
@@ -354,6 +355,11 @@ gdbpy_parse_command_name (char *text, struct cmd_list_element ***base_list,
If PREFIX is True, then this command is a prefix command.
+ PREHOOK_OF is the name of a gdb command this command becomes a
+ pre-execution hook of, same as if this command was defined using
+ "define hook-<cmdname>"
+ POSTHOOK_OF is the same for post-execution hooks.
+
The documentation for the command is taken from the doc string for
the python class.
@@ -362,15 +368,18 @@ static int
cmdpy_init (PyObject *self, PyObject *args, PyObject *kwds)
{
cmdpy_object *obj = (cmdpy_object *) self;
- char *name;
+ char *name, *pre_hook_of = NULL, *post_hook_of = NULL;
int cmdtype;
int completetype = -1;
char *docstring = NULL;
volatile struct gdb_exception except;
struct cmd_list_element **cmd_list;
+ struct cmd_list_element *pre_hookc = NULL, *post_hookc = NULL;
char *cmd_name, *pfx_name;
PyObject *is_prefix = NULL;
int cmp;
+ static char *kwlist[] = {"name", "cmdclass", "completerclass", "prefix",
+ "pre_hook_of", "post_hook_of", NULL};
if (obj->command)
{
@@ -381,8 +390,9 @@ cmdpy_init (PyObject *self, PyObject *args, PyObject *kwds)
return -1;
}
- if (! PyArg_ParseTuple (args, "si|iO", &name, &cmdtype,
- &completetype, &is_prefix))
+ if (! PyArg_ParseTupleAndKeywords (args, kwds, "si|iOss", kwlist, &name, &cmdtype,
+ &completetype, &is_prefix, &pre_hook_of,
+ &post_hook_of))
return -1;
if (cmdtype != no_class && cmdtype != class_run
@@ -402,6 +412,30 @@ cmdpy_init (PyObject *self, PyObject *args, PyObject *kwds)
return -1;
}
+ if (pre_hook_of)
+ {
+ char *text = pre_hook_of;
+
+ pre_hookc = lookup_cmd_1 (&text, cmdlist, NULL, 1);
+ if (! pre_hookc)
+ {
+ PyErr_Format (PyExc_RuntimeError, _("command name given by pre_hook argument not found"));
+ return -1;
+ }
+ }
+
+ if (post_hook_of)
+ {
+ char *text = post_hook_of;
+
+ post_hookc = lookup_cmd_1 (&text, cmdlist, NULL, 1);
+ if (! post_hookc)
+ {
+ PyErr_Format (PyExc_RuntimeError, _("command name given by post_hook argument not found"));
+ return -1;
+ }
+ }
+
cmd_name = gdbpy_parse_command_name (name, &cmd_list, &cmdlist);
if (! cmd_name)
return -1;
@@ -470,6 +504,18 @@ cmdpy_init (PyObject *self, PyObject *args, PyObject *kwds)
cmd->func = cmdpy_function;
cmd->destroyer = cmdpy_destroyer;
+ if (pre_hookc)
+ {
+ pre_hookc->hook_pre = cmd;
+ cmd->hookee_pre = pre_hookc;
+ }
+
+ if (post_hookc)
+ {
+ post_hookc->hook_post = cmd;
+ cmd->hookee_post = post_hookc;
+ }
+
obj->command = cmd;
set_cmd_context (cmd, self);
set_cmd_completer (cmd, ((completetype == -1) ? cmdpy_completer
diff --git a/gdb/symfile.c b/gdb/symfile.c
index 14cb7b8..6d0bb40 100644
--- a/gdb/symfile.c
+++ b/gdb/symfile.c
@@ -2196,7 +2196,7 @@ add_symbol_file_command (char *args, int from_tty)
statements because hex_string returns a local static
string. */
- printf_unfiltered (_("add symbol table from file \"%s\" at\n"), filename);
+ /* printf_unfiltered (_("add symbol table from file \"%s\" at\n"), filename); */
section_addrs = alloc_section_addr_info (section_index);
make_cleanup (xfree, section_addrs);
for (i = 0; i < section_index; i++)
@@ -2211,7 +2211,7 @@ add_symbol_file_command (char *args, int from_tty)
entered on the command line. */
section_addrs->other[sec_num].name = sec;
section_addrs->other[sec_num].addr = addr;
- printf_unfiltered ("\t%s_addr = %s\n", sec, paddress (addr));
+ /* printf_unfiltered ("\t%s_addr = %s\n", sec, paddress (addr)); */
sec_num++;
/* The object's sections are initialized when a
-181
View File
@@ -1,181 +0,0 @@
#
# Author: Zoltan Varga ([email protected])
# License: MIT/X11
#
#
# This is a mono support mode for a python-enabled gdb:
# http://sourceware.org/gdb/wiki/PythonGdb
# Usage:
# - copy/symlink this file, plus mono-gdbinit to the directory where the mono
# executable lives.
# - run mono under gdb, or attach to a mono process using gdb
# - Type 'xdb' in gdb to load/reload the debugging info emitted by the runtime.
# - The debug info is emitted to a file called xdb.s in the current working directory.
# When attaching to a mono process, make sure you are in the same directory.
#
import os
class StringPrinter:
"Print a C# string"
def __init__(self, val):
self.val = val
def to_string(self):
if int(self.val.cast (gdb.Type ("guint64"))) == 0:
return "null"
obj = self.val.cast (gdb.Type ("MonoString").pointer ()).dereference ()
len = obj ['length']
chars = obj ['chars']
i = 0
res = ['"']
while i < len:
c = chr ((chars.cast(gdb.Type ("gint64")) + (i * 2)).cast(gdb.Type ("gunichar2").pointer ()).dereference ())
res.append (c)
i = i + 1
res.append ('"')
return ''.join (res)
def stringify_class_name(ns, name):
if ns == "System":
if name == "Byte":
return "byte"
if name == "String":
return "string"
return "%s.%s" % (ns, name)
class ArrayPrinter:
"Print a C# array"
def __init__(self, val, class_ns, class_name):
self.val = val
self.class_ns = class_ns
self.class_name = class_name
def to_string(self):
obj = self.val.cast (gdb.Type ("MonoArray").pointer ()).dereference ()
length = obj ['max_length']
return "%s [%d]" % (stringify_class_name (self.class_ns, self.class_name [0:len(self.class_name) - 2]), int(length))
class ObjectPrinter:
"Print a C# object"
def __init__(self, val):
self.val = val
class _iterator:
def __init__(self,obj):
self.obj = obj
self.iter = self.obj.type ().fields ().__iter__ ()
pass
def __iter__(self):
return self
def next(self):
field = self.iter.next ()
return (field.name, self.obj [field.name])
def children(self):
# FIXME: It would be easier if gdb.Value would support iteration itself
# It would also be better if we could return None
if int(self.val.cast (gdb.Type ("guint64"))) == 0:
return {}.__iter__ ()
try:
obj = self.val.cast (gdb.Type ("MonoObject").pointer ()).dereference ()
class_ns = obj ['vtable'].dereference ()['klass'].dereference ()['name_space'].string ()
class_name = obj ['vtable'].dereference ()['klass'].dereference ()['name'].string ()
gdb_type = gdb.Type ("struct %s.%s" % (class_ns, class_name))
return self._iterator(obj.cast (gdb_type))
except:
return {}.__iter__ ()
def to_string(self):
if int(self.val.cast (gdb.Type ("guint64"))) == 0:
return "null"
try:
obj = self.val.cast (gdb.Type ("MonoObject").pointer ()).dereference ()
class_ns = obj ['vtable'].dereference ()['klass'].dereference ()['name_space'].string ()
class_name = obj ['vtable'].dereference ()['klass'].dereference ()['name'].string ()
if class_ns == "System" and class_name == "String":
return StringPrinter (self.val).to_string ()
if class_name [-2:len(class_name)] == "[]":
return ArrayPrinter (self.val,class_ns,class_name).to_string ()
if class_ns != "":
try:
gdb_type = gdb.Type ("struct %s.%s" % (class_ns, class_name))
except:
# Maybe there is no debug info for that type
return "%s.%s" % (class_ns, class_name)
#return obj.cast (gdb_type)
return "%s.%s" % (class_ns, class_name)
return class_name
except:
print sys.exc_info ()[0]
print sys.exc_info ()[1]
# FIXME: This can happen because we don't have liveness information
return self.val.cast (gdb.Type ("guint64"))
def register_csharp_printers(obj):
"Register C# pretty-printers with objfile Obj."
if obj == None:
obj = gdb
obj.pretty_printers['object'] = ObjectPrinter
obj.pretty_printers['string'] = StringPrinter
register_csharp_printers (gdb.current_objfile())
class MonoSupport(object):
def __init__(self):
self.s_size = 0
def run_hook(self):
if os.access ("xdb.s", os.F_OK):
os.remove ("xdb.s")
gdb.execute ("set environment MONO_XDEBUG 1")
def stop_hook(self):
# Called when the program is stopped
# Need to recompile+reload the xdb.s file if needed
# FIXME: Need to detect half-written files created when the child is
# interrupted while executing the xdb.s writing code
# FIXME: Handle appdomain unload
if os.access ("xdb.s", os.F_OK):
new_size = os.stat ("xdb.s").st_size
if new_size > self.s_size:
sofile = "xdb.so"
gdb.execute ("shell as -o xdb.o xdb.s && ld -shared -o %s xdb.o" % sofile)
# FIXME: This prints messages which couldn't be turned off
gdb.execute ("add-symbol-file %s 0" % sofile)
self.s_size = new_size
class RunHook (gdb.Command):
def __init__ (self):
super (RunHook, self).__init__ ("hook-run", gdb.COMMAND_NONE,
gdb.COMPLETE_COMMAND, pre_hook_of="run")
def invoke(self, arg, from_tty):
mono_support.run_hook ()
print "Mono support loaded."
mono_support = MonoSupport ()
# This depends on the changes in gdb-python.diff to work
#RunHook ()
# Register our hooks
# This currently cannot be done from python code
exec_file = gdb.current_objfile ().filename
# FIXME: Is there a way to detect symbolic links ?
if os.stat (exec_file).st_size != os.lstat (exec_file).st_size:
exec_file = os.readlink (exec_file)
exec_dir = os.path.dirname (exec_file)
gdb.execute ("source %s/%s-gdbinit" % (exec_dir, os.path.basename (exec_file)))
-20
View File
@@ -1,20 +0,0 @@
# Loaded by mono-gdb.py
# FIXME: According to gdb docs, this is called _before_ anything is printed
# Got broken by this patch:
# http://sourceware.org/ml/gdb-patches/2008-09/msg00193.html
# FIXME: This seems to cause crashes inside gdb
#define hook-stop
# python mono_support.stop_hook ()
#end
define hook-backtrace
python mono_support.stop_hook ()
end
define hook-run
python mono_support.run_hook ()
end
define xdb
python mono_support.stop_hook ()
end
+47
View File
@@ -0,0 +1,47 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="appSettings" type="System.Configuration.NameValueFileSectionHandler, System" />
<section name="system.diagnostics" type="System.Diagnostics.DiagnosticsConfigurationHandler, System" />
<sectionGroup name="system.web">
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSectionHandler, System.Web" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesConfigurationHandler, System.Web" />
<section name="machineKey" type="System.Web.Configuration.MachineKeyConfigHandler, System.Web" />
<section name="authentication" type="System.Web.Configuration.AuthenticationConfigHandler, System.Web" />
</sectionGroup>
</configSections>
<system.web>
<httpHandlers>
<add verb="*" path="*.aspx" type="System.Web.UI.PageHandlerFactory, System.Web" />
<add verb="*" path="*.asax" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.ascx" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="*" path="*.config" type="System.Web.HttpForbiddenHandler, System.Web" />
<add verb="GET,HEAD" path="*" type="System.Web.StaticFileHandler, System.Web" />
<add verb="*" path="*" type="System.Web.HttpMethodNotAllowedHandler, System.Web" />
</httpHandlers>
<httpModules>
<add name="FormsAuthentication" type="System.Web.Security.FormsAuthenticationModule, System.Web" />
</httpModules>
<authentication mode="Forms">
<forms name=".MONOAUTH" loginUrl="login.aspx" protection="All" timeout="30" path="/">
<credentials passwordFormat="Clear">
<!--<user name="gonzalo" password="gonz"/>-->
</credentials>
</forms>
</authentication>
<machineKey validationKey="AutoGenerate" decryptionKey="AutoGenerate" validation="SHA1" />
</system.web>
<appSettings>
<!--<add key="yourkey" value="your value" /> -->
<!--<remove key="a key defined higher in the hierarchy" /> -->
<!--<clear/> Removes all defined settings -->
</appSettings>
<system.diagnostics>
<trace autoflush="false" indentsize="4" />
</system.diagnostics>
</configuration>
-12
View File
@@ -1,12 +0,0 @@
prefix=${pcfiledir}/../..
exec_prefix=${pcfiledir}/../..
libdir=${prefix}/lib
includedir=${prefix}/include/mono-@API_VER@
Name: Mono Interpreter
Description: Mono Interpreter Runtime
Version: @VERSION@
Requires: glib-2.0 gthread-2.0
Libs: -L${libdir} @export_ldflags@ -lmint @libmono_ldflags@
Cflags: -I${includedir} @libmono_cflags@
-9
View File
@@ -1,9 +0,0 @@
prefix=${pcfiledir}/../..
exec_prefix=${pcfiledir}/../..
libdir=${prefix}/@reloc_libdir@
includedir=${prefix}/include
Name: Mono.Cairo
Description: Cairo bindings for Mono
Version: @VERSION@
Libs: -r:${prefix}/lib/mono/1.0/Mono.Cairo.dll
-7
View File
@@ -1,7 +0,0 @@
prefix=${pcfiledir}/../..
assemblies_dir=${prefix}/lib/mono-source-libs
Sources=${assemblies_dir}/getline.cs
Name: Mono.Terminal.LineEditor
Description: Terminal text entry editor using System.Console.
Version: 0.2.1
-9
View File
@@ -1,9 +0,0 @@
prefix=${pcfiledir}/../..
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
Name: Mono NUnit
Description: Mono's version of NUnit
Version: @VERSION@
Libs: -r:${libdir}/mono/1.0/nunit.core.dll -r:${libdir}/mono/1.0/nunit.core.interfaces.dll -r:${libdir}/mono/1.0/nunit.core.extensions.dll -r:${libdir}/mono/1.0/nunit.framework.dll -r:${libdir}/mono/1.0/nunit.framework.extensions.dll -r:${libdir}/mono/1.0/nunit.mocks.dll -r:${libdir}/mono/1.0/nunit.util.dll -r:${libdir}/mono/1.0/nunit-console-runner.dll
-7
View File
@@ -1,7 +0,0 @@
prefix=${pcfiledir}/../..
assemblies_dir=${prefix}/lib/mono-source-libs
Sources=${assemblies_dir}/Options.cs
Name: Mono.Options
Description: Command Line Parsing Library
Version: 0.2.1
-28
View File
@@ -1,28 +0,0 @@
/*
* mono.d: DTrace provider for Mono
*
* Authors:
* Andreas Faerber <[email protected]>
*
*/
provider mono {
/* Virtual Execution System (VES) */
probe ves__init__begin ();
probe ves__init__end ();
/* Just-in-time compiler (JIT) */
probe method__compile__begin (char* class_name, char* method_name, char* signature);
probe method__compile__end (char* class_name, char* method_name, char* signature, int success);
/* Garbage Collector (GC) */
probe gc__begin (int generation);
probe gc__end (int generation);
};
#pragma D attributes Evolving/Evolving/Common provider mono provider
#pragma D attributes Private/Private/Unknown provider mono module
#pragma D attributes Private/Private/Unknown provider mono function
#pragma D attributes Evolving/Evolving/Common provider mono name
#pragma D attributes Evolving/Evolving/Common provider mono args
-12
View File
@@ -1,12 +0,0 @@
prefix=${pcfiledir}/../..
exec_prefix=${pcfiledir}/../..
libdir=${prefix}/@reloc_libdir@
includedir=${prefix}/include/mono-@API_VER@
sysconfdir=@sysconfdir@
Name: Mono
Description: Mono Runtime
Version: @VERSION@
Requires: glib-2.0 gthread-2.0
Libs: -L${libdir} @export_ldflags@ -lmono @libmono_ldflags@
Cflags: -I${includedir} @libmono_cflags@
-40
View File
@@ -1,40 +0,0 @@
##
## mono-specific suppressions (Boehm-GC) for use with valgrind
##
{
mono - Conditional jump or move depends on uninitialised value
Memcheck:Cond
fun:GC_*
fun:*
obj:*mono
}
{
mono - Use of uninitialized value of size 4
Memcheck:Value4
fun:GC_*
fun:*
obj:*mono
}
{
mono - Use of uninitialized value of size 8
Memcheck:Value8
fun:GC_*
fun:*
obj:*mono
}
{
mono - Use of uninitialized value of size 1
Memcheck:Value1
fun:GC_*
fun:*
obj:*mono
}
{
mono - Invalid read of size 4
Memcheck:Addr4
fun:GC_*
fun:*
obj:*mono
}
-9
View File
@@ -1,9 +0,0 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@prefix@/lib
sourcesdir=${libdir}/monodoc/sources
Name: Monodoc
Description: Monodoc - Mono Documentation Tools
Version: @VERSION@
Libs: /r:${prefix}/lib/mono/monodoc/monodoc.dll
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
-8
View File
@@ -1,8 +0,0 @@
monodir = $(sysconfdir)/mono/1.0
EXTRA_DIST = machine.config \
DefaultWsdlHelpGenerator.aspx
mono_DATA = machine.config \
DefaultWsdlHelpGenerator.aspx
-243
View File
@@ -1,243 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="appSettings" type="System.Configuration.NameValueFileSectionHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.DiagnosticsConfigurationHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSectionHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowLocation="false"/>
<section name="system.windows.forms" type="System.Configuration.IgnoreSectionHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="system.web">
<section name="httpHandlers"
type="System.Web.Configuration.HttpHandlersSectionHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules"
type="System.Web.Configuration.HttpModulesConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey"
type="System.Web.Configuration.MachineKeyConfigHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="authentication"
type="System.Web.Configuration.AuthenticationConfigHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="authorization"
type="System.Web.Configuration.AuthorizationConfigHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="globalization"
type="System.Web.Configuration.GlobalizationConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="sessionState"
type="System.Web.SessionState.SessionStateSectionHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trace"
type="System.Web.Configuration.TraceConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices"
type="System.Web.Services.Configuration.WebServicesConfigurationSectionHandler, System.Web.Services, Version=1.0.5000.0 Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webControls"
type="System.Web.Configuration.WebControlsSectionHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation"
type="System.Web.Configuration.CompilationConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime"
type="System.Web.Configuration.HttpRuntimeConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="customErrors"
type="System.Web.Configuration.CustomErrorsConfigHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="pages"
type="System.Web.Configuration.PagesConfigurationHandler, System.Web, Version=1.0.5000.0, Culture=neutral" />
<section name="clientTarget"
type="System.Web.Configuration.ClientTargetSectionHandler, System.Web, Version=1.0.5000.0, Culture=neutral" />
</sectionGroup>
<sectionGroup name="system.net">
<section name="settings"
type="System.Net.Configuration.NetConfigurationHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement"
type="System.Net.Configuration.ConnectionManagementHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="authenticationModules"
type="System.Net.Configuration.NetAuthenticationModuleHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy"
type="System.Net.Configuration.DefaultProxyHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules"
type="System.Net.Configuration.WebRequestModuleHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="system.drawing" type="System.Configuration.NameValueSectionHandler, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</configSections>
<system.net>
<connectionManagement>
<add address="*" maxconnection="2" />
</connectionManagement>
<authenticationModules>
<add type="System.Net.BasicClient, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add type="System.Net.DigestClient, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add type="System.Net.NtlmClient, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</authenticationModules>
<defaultProxy>
<proxy
usesystemdefault = "true"
bypassonlocal = "true"
/>
<!-- proxyaddress can also be set -->
</defaultProxy>
<webRequestModules>
<add prefix="http" type="System.Net.HttpRequestCreator, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="https" type="System.Net.HttpRequestCreator, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="file" type="System.Net.FileWebRequestCreator, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</webRequestModules>
<settings>
<ipv6 enabled="false"/>
</settings>
</system.net>
<system.web>
<httpHandlers>
<add verb="*" path="Trace.axd" type="System.Web.Handlers.TraceHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.aspx" type="System.Web.UI.PageHandlerFactory, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.asmx" validate="false" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.ashx" type="System.Web.UI.SimpleHandlerFactory, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="GET" path="WebResource.axd" type="System.Web.Handlers.AssemblyResourceLoader, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.asax" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.ascx" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.config" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.Config" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.cs" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.dll" type="System.Web.HttpForbiddenHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.rem" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="*" path="*.soap" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="GET,HEAD" path="*" type="System.Web.StaticFileHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*" type="System.Web.HttpMethodNotAllowedHandler, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpHandlers>
<httpModules>
<add name="FormsAuthentication" type="System.Web.Security.FormsAuthenticationModule, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="UrlAuthorization" type="System.Web.Security.UrlAuthorizationModule, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="OutputCache" type="System.Web.Caching.OutputCacheModule, System.Web, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpModules>
<authentication mode="Forms">
<forms name=".MONOAUTH" loginUrl="login.aspx" protection="All" timeout="30" path="/">
<credentials passwordFormat="Clear">
<!--<user name="gonzalo" password="gonz"/>-->
</credentials>
</forms>
</authentication>
<machineKey validationKey="AutoGenerate" decryptionKey="AutoGenerate" validation="SHA1" />
<globalization requestEncoding="utf-8"
responseEncoding="utf-8"
fileEncoding="utf-8"/>
<!--
culture="en-US"
uiculture="en-US" />
-->
<sessionState mode="InProc" />
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpPost"/>
<add name="HttpGet"/>
<add name="Documentation"/>
</protocols>
<wsdlHelpGenerator href="DefaultWsdlHelpGenerator.aspx" />
</webServices>
<webControls clientScriptsLocation="/web_scripts" />
<compilation debug="false" defaultLanguage="c#" explicit="true" strict="false" >
<compilers>
<compiler language="cs;c#;csharp" extension=".cs" warningLevel="1" compilerOptions=""
type="Microsoft.CSharp.CSharpCodeProvider, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<compiler language="vb;vbs;visualbasic;vbscript" extension=".vb"
warningLevel="1" compilerOptions=""
type="Microsoft.VisualBasic.VBCodeProvider, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</compilers>
<assemblies>
<!--<add assembly="mscorlib" /> -->
<add assembly="System" />
<add assembly="System.Xml" />
<add assembly="System.Data" />
<add assembly="System.Web" />
<add assembly="System.Web.Services" />
<add assembly="System.Drawing" />
<add assembly="*" /> <!-- Add assemblies in bin directory -->
</assemblies>
</compilation>
<!--
RequestLengthDiskThreshold is a 2.0 feature that we
enable for 1.x too.
-->
<httpRuntime executionTimeout="90"
maxRequestLength="4096"
requestLengthDiskThreshold="256"
useFullyQualifiedRedirectUrl="false"
minFreeThreads="8"
minLocalRequestFreeThreads="4"
appRequestQueueLimit="100" />
<pages buffer="true"
enableSessionState="true"
autoEventWireup="true"
validateRequest="true" />
<clientTarget>
<add alias="ie5" userAgent="Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" />
<add alias="ie4" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="uplevel" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="downlevel" userAgent="Unknown" />
</clientTarget>
</system.web>
<system.runtime.remoting>
<application>
<channels>
<channel ref="http client" displayName="http client (delay loaded)" delayLoadAsClientChannel="true" />
<channel ref="tcp client" displayName="tcp client (delay loaded)" delayLoadAsClientChannel="true" />
</channels>
</application>
<channels>
<channel id="http" type="System.Runtime.Remoting.Channels.Http.HttpChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http client" type="System.Runtime.Remoting.Channels.Http.HttpClientChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http server" type="System.Runtime.Remoting.Channels.Http.HttpServerChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp" type="System.Runtime.Remoting.Channels.Tcp.TcpChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp client" type="System.Runtime.Remoting.Channels.Tcp.TcpClientChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp server" type="System.Runtime.Remoting.Channels.Tcp.TcpServerChannel, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</channels>
<channelSinkProviders>
<clientProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapClientFormatterSinkProvider, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryClientFormatterSinkProvider, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</clientProviders>
<serverProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapServerFormatterSinkProvider, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryServerFormatterSinkProvider, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<provider id="wsdl" type="System.Runtime.Remoting.MetadataServices.SdlChannelSinkProvider, System.Runtime.Remoting, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</serverProviders>
</channelSinkProviders>
</system.runtime.remoting>
<appSettings>
<!--<add key="yourkey" value="your value" /> -->
<!--<remove key="a key defined higher in the hierarchy" /> -->
<!--<clear/> Removes all defined settings -->
</appSettings>
<system.diagnostics>
<trace autoflush="false" indentsize="4" />
</system.diagnostics>
<system.drawing>
</system.drawing>
<mscorlib>
<cryptographySettings>
<cryptoNameMapping>
<cryptoClasses>
<cryptoClass monoMD2="Mono.Security.Cryptography.MD2Managed, Mono.Security, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756" />
</cryptoClasses>
<nameEntry name="MD2" class="monoMD2" />
</cryptoNameMapping>
<oidMap>
<oidEntry OID="1.2.840.113549.2.2" name="MD2" />
<oidEntry OID="1.2.840.113549.2.2" name="Mono.Security.Cryptography.MD2Managed" />
</oidMap>
</cryptographySettings>
</mscorlib>
<strongNames>
<pubTokenMapping>
<!-- ECMA key -->
<map Token="b77a5c561934e089" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Microsoft (final) key -->
<map Token="b03f5f7f11d50a3a" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Microsoft (Web Service Enhancement) key -->
<map Token="31bf3856ad364e35" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- IBM (DB2 Data Provider) key -->
<map Token="7c307b91aa13d208" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Silverlight 2.0 key -->
<map Token="7cec85d7bea7798e" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
</pubTokenMapping>
</strongNames>
</configuration>
-6
View File
@@ -1,6 +0,0 @@
2008-03-23 Dean Brettle <[email protected]>
* Compat.browser: added. Provides browser definitions with
compatible IDs.
-42
View File
@@ -1,42 +0,0 @@
<!--
This file defines some of the browsers that Microsoft's implementation provides in
<windir>\Microsoft.NET\Framework\<ver>\CONFIG\Browsers\*.browser
It is not derived from any file distributed with Microsoft's implementation. Since
we can't distribute MS's browser files, we use browscap.ini to determine
browser capabilities. Then, if and only if the application contains App_Browser/*.browser
files and we are using .NET 2.0 or higher, we supplement the capabilities with the
information in those files and the files in this directory. The primary goal of this file
is provide browser definitions that might be referenced in App_Browser/*.browser files.
-->
<browsers>
<defaultBrowser id="Default">
</defaultBrowser>
<browser id="Default">
<identification>
<userAgent match="." />
</identification>
</browser>
<browser id="IE6to9" parentID="Default">
<identification>
<capability name="majorver" match="^[6-9]" />
<capability name="browser" match="^(IE|AOL)$" />
</identification>
</browser>
<browser id="Opera8to9" parentID="Default">
<identification>
<capability name="majorver" match="^[8-9]" />
<capability name="browser" match="^Opera$" />
</identification>
</browser>
<browser id="Safari" parentID="Default">
<identification>
<capability name="browser" match="^Safari$" />
</identification>
</browser>
<browser id="Mozilla" parentID="Default">
<identification>
<capability name="browser" match="^Mozilla" />
</identification>
</browser>
</browsers>
-6
View File
@@ -1,6 +0,0 @@
monodir = $(sysconfdir)/mono/2.0/Browsers
EXTRA_DIST = Compat.browser
mono_DATA = Compat.browser
-120
View File
@@ -1,120 +0,0 @@
2009-01-23 Atsushi Enomoto <[email protected]>
* web.config : added .svc handler.
2009-01-07 Kornél Pál <[email protected]>
* DefaultWsdlHelpGenerator.aspx: Move <script> at the end of <head> that
will make Visual Studio recognize the web service disco reference.
Contributed under MIT/X11 license.
2008-12-03 Marek Habersack <[email protected]>
* machine.config: rename serviceModelHostingEnvironment to
serviceHostingEnvironment.
2008-11-20 Gonzalo Paniagua Javier <[email protected]>
* machine.config: in 2.0, there's no <connectionManagement> section
here. Bug #445991 fixed.
2008-11-14 Gonzalo Paniagua Javier <[email protected]>
* DefaultWsdlHelpGenerator.aspx: use javascript instead of
HttpWebRequest to avoid a deadlock if the web service uses Session.
Bug #444343 fixed.
2008-10-09 Gonzalo Paniagua Javier <[email protected]>
* web.config: default values for httpRuntime are different in 2.0
2008-10-09 Marek Habersack <[email protected]>
* web.config: added the default monoSettings section which works around
an incompatibility between mcs and csc, mentioned in bug #433806
* machine.config: added definition of the monoSettings section to
the system.web group
2008-10-06 Marek Habersack <[email protected]>
* machine.config: added entries to ignore the mobileControls and
deviceFilters sections.
2008-09-02 Marek Habersack <[email protected]>
* web.config: removed System.Web.Extensions.dll from the assemblies
(reverting r112073) - it would break all the ASP.NET applications
which use System.Web.Extensions other than 3.5.0.0
2008-09-06 Daniel Morgan <[email protected]>
* machine.config: added Mono.Data.SybaseClient
to DbProviderFactories section.
2008-09-02 Atsushi Enomoto <[email protected]>
* web.config: added System.Web.Extensions.dll to assemblies.
2008-08-28 Zoltan Varga <[email protected]>
* machine.config: Fix syntax error.
2008-03-23 Dean Brettle <[email protected]>
* Makefile.am: added Browsers/Compat.browser
2008-02-29 Marek Habersack <[email protected]>
* machine.config: added an entry to ignore the browserCaps section.
2007-12-15 Marek Habersack <[email protected]>
* web.config: compilation/compilers are no longer necessary.
2007-12-08 Marek Habersack <[email protected]>
* machine.config: updated the LocalSqlServer connection string to
match MS.NET and added a new connection string, LocalSqliteServer,
to be used by default on Unix.
Updated the AspNetSqlMembershipProvider definition to match
MS.NET.
* settings.map: added
* Makefile.am: added settings.map
2007-10-17 Atsushi Enomoto <[email protected]>
* web.config, machine.config: moved webSerices section from former
to latter.
2007-09-05 Atsushi Enomoto <[email protected]>
* machine.config : added WCF sectionGroups.
2007-09-04 Marek Habersack <[email protected]>
* machine.config: added an entry to ignore the <system.webServer>
section. Fixes bug #82535
2007-07-03 Marek Habersack <[email protected]>
* DefaultWsdlHelpGenerator.aspx: make head server-side, for the
service generator to run on sites which use stylesheet themes
configured in web.config. Fixes bug #81994
2007-05-01 Marek Habersack <[email protected]>
* machine.config: added standard data provider factories, or
otherwise the SqlDataSource tests will fail.
2007-04-27 Atsushi Enomoto <[email protected]>
* DefaultWsdlHelpGenerator.aspx :
ProfileViolations could be null, when there is no Binding. So,
don't omit null check.
Stop your bad habit of missing ChangeLog. Former changes (as long
as logged) can be seen in ../../ChangeLog.
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
-14
View File
@@ -1,14 +0,0 @@
SUBDIRS = Browsers
monodir = $(sysconfdir)/mono/2.0
EXTRA_DIST = machine.config \
web.config \
DefaultWsdlHelpGenerator.aspx \
settings.map
mono_DATA = machine.config \
web.config \
DefaultWsdlHelpGenerator.aspx \
settings.map
-257
View File
@@ -1,257 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="configProtectedData" type="System.Configuration.ProtectedConfigurationSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false"/>
<section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false"/>
<section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false"/>
<section name="system.codedom" type="System.CodeDom.Compiler.CodeDomConfigurationHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.DiagnosticsConfigurationHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowLocation="false"/>
<section name="system.windows.forms" type="System.Windows.Forms.WindowsFormsSection, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="strongNames" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowLocation="false"/>
<sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="browserCaps" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="deployment" type="System.Web.Configuration.DeploymentSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
<section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="healthMonitoring" type="System.Web.Configuration.HealthMonitoringSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="hostingEnvironment" type="System.Web.Configuration.HostingEnvironmentSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="httpCookies" type="System.Web.Configuration.HttpCookiesSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="identity" type="System.Web.Configuration.IdentitySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="mobileControls" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="deviceFilters" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="processModel" type="System.Web.Configuration.ProcessModelSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
<section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="securityPolicy" type="System.Web.Configuration.SecurityPolicySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionPageState" type="System.Web.Configuration.SessionPageStateSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trust" type="System.Web.Configuration.TrustSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webParts" type="System.Web.Configuration.WebPartsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
<section name="sqlCacheDependency" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication"/>
</sectionGroup>
<section name="monoSettings" type="System.Web.Configuration.MonoSettingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</sectionGroup>
<sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="system.drawing" type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="system.serviceModel" type="System.ServiceModel.Configuration.ServiceModelSectionGroup, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="behaviors" type="System.ServiceModel.Configuration.BehaviorsSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="bindings" type="System.ServiceModel.Configuration.BindingsSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="client" type="System.ServiceModel.Configuration.ClientSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="commonBehaviors" type="System.ServiceModel.Configuration.CommonBehaviorsSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="diagnostic" type="System.ServiceModel.Configuration.DiagnosticSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="extensions" type="System.ServiceModel.Configuration.ExtensionsSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="serviceHostingEnvironment" type="System.ServiceModel.Configuration.ServiceHostingEnvironmentSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="services" type="System.ServiceModel.Configuration.ServicesSection, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</configSections>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/>
<add name="LocalSqliteServer" connectionString="Data Source=|DataDirectory|/aspnetdb.sqlite;version=3" providerName="Mono.Data.Sqlite"/>
</connectionStrings>
<configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
<providers>
<add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
description="" keyContainerName="MonoFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
<add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
description="" useMachineProtection="true" keyEntropy="" />
</providers>
</configProtectedData>
<system.net>
<authenticationModules>
<add type="System.Net.BasicClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add type="System.Net.DigestClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add type="System.Net.NtlmClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</authenticationModules>
<webRequestModules>
<add prefix="http" type="System.Net.HttpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="https" type="System.Net.HttpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="file" type="System.Net.FileWebRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="ftp" type="System.Net.FtpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</webRequestModules>
<settings>
<ipv6 enabled="false"/>
</settings>
</system.net>
<system.runtime.remoting>
<application>
<channels>
<channel ref="http client" displayName="http client (delay loaded)" delayLoadAsClientChannel="true" />
<channel ref="tcp client" displayName="tcp client (delay loaded)" delayLoadAsClientChannel="true" />
<channel ref="ipc client" displayName="ipc client (delay loaded)" delayLoadAsClientChannel="true" />
</channels>
</application>
<channels>
<channel id="http" type="System.Runtime.Remoting.Channels.Http.HttpChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http client" type="System.Runtime.Remoting.Channels.Http.HttpClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http server" type="System.Runtime.Remoting.Channels.Http.HttpServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp" type="System.Runtime.Remoting.Channels.Tcp.TcpChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp client" type="System.Runtime.Remoting.Channels.Tcp.TcpClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp server" type="System.Runtime.Remoting.Channels.Tcp.TcpServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="ipc" type="System.Runtime.Remoting.Channels.Ipc.IpcChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="ipc client" type="System.Runtime.Remoting.Channels.Ipc.IpcClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="ipc server" type="System.Runtime.Remoting.Channels.Ipc.IpcServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</channels>
<channelSinkProviders>
<clientProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapClientFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryClientFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</clientProviders>
<serverProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapServerFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryServerFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<provider id="wsdl" type="System.Runtime.Remoting.MetadataServices.SdlChannelSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</serverProviders>
</channelSinkProviders>
</system.runtime.remoting>
<appSettings>
<!--<add key="yourkey" value="your value" /> -->
<!--<remove key="a key defined higher in the hierarchy" /> -->
<!--<clear/> Removes all defined settings -->
</appSettings>
<system.diagnostics>
<trace autoflush="false" indentsize="4" />
</system.diagnostics>
<system.drawing>
</system.drawing>
<system.data>
<DbProviderFactories>
<add name="Mono Sqlite Data Provider" invariant="Mono.Data.SqliteClient"
description="Mono Framework Data Provider for SQLite (old version)"
type="Mono.Data.SqliteClient.SqliteFactory, Mono.Data.SqliteClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756"/>
<add name="Mono Sqlite Provider" invariant="Mono.Data.Sqlite"
description="Mono Framework Data Provider for SQLite (new version)"
type="Mono.Data.Sqlite.SqliteFactory, Mono.Data.Sqlite, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756"/>
<add name="Odbc Data Provider" invariant="System.Data.Odbc"
description=".Net Framework Data Provider for Odbc"
type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add name="OleDb Data Provider" invariant="System.Data.OleDb"
description=".Net Framework Data Provider for OleDb"
type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient"
description=".Net Framework Data Provider for Oracle"
type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add name="SqlClient Data Provider" invariant="System.Data.SqlClient"
description=".Net Framework Data Provider for SqlServer"
type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add name="Sybase Data Provider" invariant="Mono.Data.SybaseClient"
description=".Net Framework Data Provider for Sybase"
type="Mono.Data.SybaseClient.SybaseClientFactory, Mono.Data.SybaseClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756"/>
</DbProviderFactories>
</system.data>
<mscorlib>
<cryptographySettings>
<cryptoNameMapping>
<cryptoClasses>
<cryptoClass monoMD2="Mono.Security.Cryptography.MD2Managed, Mono.Security, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756" />
</cryptoClasses>
<nameEntry name="MD2" class="monoMD2" />
</cryptoNameMapping>
<oidMap>
<oidEntry OID="1.2.840.113549.2.2" name="MD2" />
<oidEntry OID="1.2.840.113549.2.2" name="Mono.Security.Cryptography.MD2Managed" />
</oidMap>
</cryptographySettings>
</mscorlib>
<strongNames>
<pubTokenMapping>
<!-- ECMA key -->
<map Token="b77a5c561934e089" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Microsoft (final) key -->
<map Token="b03f5f7f11d50a3a" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Microsoft (Web Service Enhancement) key -->
<map Token="31bf3856ad364e35" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- IBM (DB2 Data Provider) key -->
<map Token="7c307b91aa13d208" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
<!-- Silverlight 2.0 key -->
<map Token="7cec85d7bea7798e" PublicKey="002400000480000094000000060200000024000052534131000400000100010079159977d2d03a8e6bea7a2e74e8d1afcc93e8851974952bb480a12c9134474d04062447c37e0e68c080536fcf3c3fbe2ff9c979ce998475e506e8ce82dd5b0f350dc10e93bf2eeecf874b24770c5081dbea7447fddafa277b22de47d6ffea449674a4f9fccf84d15069089380284dbdd35f46cdff12a1bd78e4ef0065d016df" />
</pubTokenMapping>
</strongNames>
<system.web>
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpSoap12"/>
<add name="HttpPost"/>
<add name="HttpGet"/>
<add name="Documentation"/>
</protocols>
<conformanceWarnings>
<add name="BasicProfile1_1"/>
</conformanceWarnings>
<wsdlHelpGenerator href="DefaultWsdlHelpGenerator.aspx" />
</webServices>
<membership>
<providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/>
<!-- <add name="AspNetSqlMembershipProvider" type="Mainsoft.Web.Security.GenericMembershipProvider, Mainsoft.Web.Security" applicationName="/" connectionStringName="LocalSqlServer" /> -->
</providers>
</membership>
<roleManager>
<providers>
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="/" connectionStringName="LocalSqlServer" />
<!-- <add name="AspNetSqlRoleProvider" type="Mainsoft.Web.Security.GenericRoleProvider, Mainsoft.Web.Security" applicationName="/" connectionStringName="LocalSqlServer" /> -->
</providers>
</roleManager>
<profile>
<providers>
<add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
</profile>
</system.web>
</configuration>
-517
View File
@@ -1,517 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="configProtectedData" type="System.Configuration.ProtectedConfigurationSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.codedom" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.data.dataset" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.data.odbc" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.data.oledb" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.data.oracleclient" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.data.sqlclient" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.windows.forms" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.DiagnosticsConfigurationHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowLocation="false"/>
<section name="strongNames" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowLocation="false"/>
<sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="mobileControls" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="deviceFilters" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="browserCaps" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="deployment" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
<section name="healthMonitoring" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="hostingEnvironment" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="httpCookies" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="identity" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="processModel" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
<section name="securityPolicy" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionPageState" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trust" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="webParts" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sqlCacheDependency" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.xml.serialization" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="schemaImporterExtensions" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="dateTimeSerialization" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xmlSerializer" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
</sectionGroup>
<sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.transactions" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="defaultSettings" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineSettings" type="System.Configuration.IgnoreSection, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
</sectionGroup>
<section name="system.drawing" type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mainsoft.drawing">
<section name="icons" type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="codecs" type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="codecsmetadata" type="Mainsoft.Drawing.Configuration.ResolutionConfigurationHandler" />
</sectionGroup>
<sectionGroup name="mainsoft.directoryservices">
<section name="settings" type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
</sectionGroup>
<sectionGroup name="Mainsoft.Data.Configuration">
<section name="objectnameresolution"
type="System.Data.Configuration.ObjectNameResolutionSectionHandler, System.Data" />
<section name="switches"
type="System.Configuration.NameValueSectionHandler, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="OleDbProviders"
type="Mainsoft.Data.Configuration.ProvidersSectionHandler, System.Data" />
<section name="SqlClientProviders"
type="Mainsoft.Data.Configuration.ProvidersSectionHandler, System.Data" />
<section name="OracleClientProviders"
type="Mainsoft.Data.Configuration.ProvidersSectionHandler, System.Data" />
</sectionGroup>
</configSections>
<configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
<providers>
<add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
description="" keyContainerName="MonoFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
<add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
description="" useMachineProtection="true" keyEntropy="" />
</providers>
</configProtectedData>
<system.net>
<connectionManagement>
<add address="*" maxconnection="2" />
</connectionManagement>
<authenticationModules>
<add type="System.Net.BasicClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add type="System.Net.DigestClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<!-- <add type="System.Net.NtlmClient, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> -->
</authenticationModules>
<webRequestModules>
<add prefix="http" type="System.Net.HttpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="https" type="System.Net.HttpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="file" type="System.Net.FileWebRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add prefix="ftp" type="System.Net.FtpRequestCreator, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</webRequestModules>
<settings>
<ipv6 enabled="false"/>
</settings>
</system.net>
<system.runtime.remoting>
<application>
<channels>
<channel ref="http client" displayName="http client (delay loaded)" delayLoadAsClientChannel="true" />
<channel ref="tcp client" displayName="tcp client (delay loaded)" delayLoadAsClientChannel="true" />
<!-- <channel ref="ipc client" displayName="ipc client (delay loaded)" delayLoadAsClientChannel="true" /> -->
</channels>
</application>
<channels>
<channel id="http" type="System.Runtime.Remoting.Channels.Http.HttpChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http client" type="System.Runtime.Remoting.Channels.Http.HttpClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="http server" type="System.Runtime.Remoting.Channels.Http.HttpServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp" type="System.Runtime.Remoting.Channels.Tcp.TcpChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp client" type="System.Runtime.Remoting.Channels.Tcp.TcpClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="tcp server" type="System.Runtime.Remoting.Channels.Tcp.TcpServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<!-- <channel id="ipc" type="System.Runtime.Remoting.Channels.Ipc.IpcChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="ipc client" type="System.Runtime.Remoting.Channels.Ipc.IpcClientChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<channel id="ipc server" type="System.Runtime.Remoting.Channels.Ipc.IpcServerChannel, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> -->
</channels>
<channelSinkProviders>
<clientProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapClientFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryClientFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</clientProviders>
<serverProviders>
<formatter id="soap" type="System.Runtime.Remoting.Channels.SoapServerFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<formatter id="binary" type="System.Runtime.Remoting.Channels.BinaryServerFormatterSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<provider id="wsdl" type="System.Runtime.Remoting.MetadataServices.SdlChannelSinkProvider, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</serverProviders>
</channelSinkProviders>
</system.runtime.remoting>
<appSettings>
<!--<add key="yourkey" value="your value" /> -->
<!--<remove key="a key defined higher in the hierarchy" /> -->
<!--<clear/> Removes all defined settings -->
</appSettings>
<system.diagnostics>
<trace autoflush="false" indentsize="4" />
</system.diagnostics>
<system.drawing>
</system.drawing>
<connectionStrings>
<add name="EmbeddedDerby" connectionString="JdbcDriverClassName=org.apache.derby.jdbc.EmbeddedDriver;JdbcURL=jdbc:derby:|DataDirectory|aspnetdb;create=true" providerName="System.Data.OleDb" />
</connectionStrings>
<system.data>
<DbProviderFactories>
<add name="OleDb Data Provider" support="2" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data" />
<add name="OracleClient Data Provider" support="2" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient" />
<add name="SqlClient Data Provider" support="2" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data" />
</DbProviderFactories>
</system.data>
<system.web>
<authorization>
<allow users="*" />
</authorization>
<httpHandlers>
<add verb="*" path="Trace.axd" type="System.Web.Handlers.TraceHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="trace.axd" type="System.Web.Handlers.TraceHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.aspx" type="Mainsoft.Web.Hosting.ServletFacesPageHandlerFactory, Mainsoft.Web" />
<add verb="*" path="*.asmx" validate="false" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<!-- <add verb="*" path="*.ashx" type="System.Web.UI.SimpleHandlerFactory, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> -->
<add verb="*" path="*.ashx" type="System.Web.UI.PageHandlerFactory, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="GET" path="WebResource.axd" type="System.Web.Handlers.AssemblyResourceLoader, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.master" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.resources" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.skin" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.browser" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.sitemap" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.webinfo" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.resx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.asax" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.ascx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.config" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.cs" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.vb" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.csproj" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.vbproj" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.licx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.dll" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.java" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.class" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.jar" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.exclude" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.refresh" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.mdf" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.ldf" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.lck" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.properties" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.dat" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.ctrl" type="System.Web.HttpForbiddenHandler" validate="True" />
<add verb="*" path="*.rem" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="*" path="*.soap" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="GET,HEAD" path="*" type="System.Web.StaticFileHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*" type="System.Web.HttpMethodNotAllowedHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpHandlers>
<httpModules>
<add name="OutputCache" type="System.Web.Caching.OutputCacheModule" />
<add name="Session" type="System.Web.SessionState.SessionStateModule" />
<!--add name="WindowsAuthentication" type="System.Web.Security.WindowsAuthenticationModule" /-->
<add name="ServletAuthentication" type="Mainsoft.Web.Security.SevletAuthenticationModule" />
<add name="FormsAuthentication" type="System.Web.Security.FormsAuthenticationModule" />
<!--add name="PassportAuthentication" type="System.Web.Security.PassportAuthenticationModule" /-->
<add name="RoleManager" type="System.Web.Security.RoleManagerModule" />
<add name="UrlAuthorization" type="System.Web.Security.UrlAuthorizationModule" />
<!--add name="FileAuthorization" type="System.Web.Security.FileAuthorizationModule" /-->
<add name="AnonymousIdentification" type="System.Web.Security.AnonymousIdentificationModule" />
<add name="Profile" type="System.Web.Profile.ProfileModule" />
</httpModules>
<machineKey validationKey="AutoGenerate" decryptionKey="AutoGenerate" validation="SHA1" />
<globalization requestEncoding="utf-8"
responseEncoding="utf-8"
fileEncoding="utf-8"/>
<!--
culture="en-US"
uiculture="en-US" />
-->
<sessionState
mode="Custom"
customProvider="ServletSessionStateStore"
sessionIDManagerType="Mainsoft.Web.SessionState.ServletSessionIDManager">
<providers>
<add name="ServletSessionStateStore"
type="Mainsoft.Web.SessionState.ServletSessionStateStoreProvider" />
</providers>
</sessionState>
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpSoap12"/>
<add name="HttpPostLocalhost"/>
<add name="Documentation"/>
</protocols>
<conformanceWarnings>
<add name="BasicProfile1_1"/>
</conformanceWarnings>
<wsdlHelpGenerator href="DefaultWsdlHelpGenerator.aspx" />
</webServices>
<webControls clientScriptsLocation="/web_scripts" />
<compilation debug="false" defaultLanguage="c#" explicit="true" strict="false" >
<compilers>
<compiler language="cs;c#;csharp" extension=".cs" warningLevel="1" compilerOptions=""
type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<compiler language="vb;vbs;visualbasic;vbscript" extension=".vb"
warningLevel="1" compilerOptions=""
type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</compilers>
<assemblies>
<!--<add assembly="mscorlib" /> -->
<add assembly="System" />
<add assembly="System.Xml" />
<add assembly="System.Configuration" />
<add assembly="System.Data" />
<add assembly="System.Web" />
<add assembly="System.Web.Services" />
<add assembly="System.Drawing" />
<add assembly="*" /> <!-- Add assemblies in bin directory -->
</assemblies>
</compilation>
<httpRuntime executionTimeout="90"
maxRequestLength="4096"
useFullyQualifiedRedirectUrl="false"
minFreeThreads="8"
minLocalRequestFreeThreads="4"
appRequestQueueLimit="100" />
<clientTarget>
<add alias="ie5" userAgent="Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" />
<add alias="ie4" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="uplevel" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="downlevel" userAgent="Unknown" />
</clientTarget>
<siteMap defaultProvider="AspNetXmlSiteMapProvider">
<providers>
<add name="AspNetXmlSiteMapProvider"
description="Default site map provider that reads in .sitemap xml files."
type="System.Web.XmlSiteMapProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
siteMapFile="Web.sitemap" />
</providers>
</siteMap>
<membership defaultProvider="AspNetDerbyMembershipProvider">
<providers>
<add name="AspNetDerbyMembershipProvider" connectionStringName="EmbeddedDerby" applicationName="/" type="Mainsoft.Web.Security.DerbyMembershipProvider, Mainsoft.Web" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<!-- add name="WPSMembershipProvider" applicationName="/" type="Mainsoft.Web.Security.WPSMembershipProvider, Mainsoft.Web.WAS" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" / -->
</providers>
</membership>
<profile defaultProvider="AspNetDerbyProfileProvider">
<providers>
<add name="AspNetDerbyProfileProvider" connectionStringName="EmbeddedDerby" applicationName="/" type="Mainsoft.Web.Profile.DerbyProfileProvider, Mainsoft.Web" />
</providers>
</profile>
<roleManager defaultProvider="AspNetDerbyRoleProvider">
<providers>
<add name="AspNetDerbyRoleProvider" connectionStringName="EmbeddedDerby" applicationName="/" type="Mainsoft.Web.Security.DerbyRoleProvider, Mainsoft.Web" />
</providers>
</roleManager>
</system.web>
<Mainsoft.Data.Configuration>
<objectnameresolution>
<!-- CATALOG.SCHEMA.NAME-->
<!-- "^\s*((((\[\s*(?<CATALOG>(\s*[^\[\]\s])+)\s*\])|(?<CATALOG>(\w|!|\#|\$)*(\s*(\w|!|\#|\$)+)*))\s*\.\s*)?((\[(?<SCHEMA>(\s*[^\[\]\s])+)\s*\])|(?<SCHEMA>(\w|!|\#|\$)*(\s*(\w|!|\#|\$)+)*))\s*\.\s*)?((\[(?<NAME>(\s*[^\[\]\s])+)\s*\])|(?<NAME>(\w|!|\#|\$)+(\s*(\w|!|\#|\$)+)*))\s*$" -->
<!-- <add dbname="<name returned by server>" match="^\s*((((\[\s*(?&lt;CATALOG&gt;(\s*[^\[\]\s])+)\s*\])|(?&lt;CATALOG&gt;(\w|!|\#|\$)*(\s*(\w|!|\#|\$)+)*))\s*\.\s*)?((\[(?&lt;SCHEMA&gt;(\s*[^\[\]\s])+)\s*\])|(?&lt;SCHEMA&gt;(\w|!|\#|\$)*(\s*(\w|!|\#|\$)+)*))\s*\.\s*)?((\[(?&lt;NAME&gt;(\s*[^\[\]\s])+)\s*\])|(?&lt;NAME&gt;(\w|!|\#|\$)+(\s*(\w|!|\#|\$)+)*))\s*$" priority="1"/> -->
</objectnameresolution>
<OleDbProviders>
<!-- Microsoft SQLServer driver 2000 -->
<provider>
<add key="url" value = "jdbc:microsoft:sqlserver://${servername}:${port};DatabaseName=${database}" />
<add key="driverClassName" value = "com.microsoft.jdbc.sqlserver.SQLServerDriver" />
<add key="id" value = "SQLJDBC2000" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2000, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
</provider>
<!-- Microsoft SQLServer driver 2005 -->
<provider>
<add key="url" value = "jdbc:sqlserver://${servername}" />
<add key="driverClassName" value = "com.microsoft.sqlserver.jdbc.SQLServerDriver" />
<add key="id" value = "SQLJDBC2005" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2005, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
<add key="keyUnsupported" value="AttachDBFilename" />
</provider>
<!-- Microsoft SQLServer driver 2005 (default) -->
<provider>
<add key="url" value = "jdbc:sqlserver://${servername}" />
<add key="driverClassName" value = "com.microsoft.sqlserver.jdbc.SQLServerDriver" />
<add key="id" value = "SQLOLEDB.1" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2005, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
<add key="keyUnsupported" value="AttachDBFilename" />
</provider>
<!-- Oracle driver -->
<provider>
<add key="url" value = "jdbc:oracle:thin:@//${servername}:${port}/${servicename}" />
<add key="driverClassName" value = "oracle.jdbc.OracleDriver" />
<add key="port" value = "1521" />
<add key="id" value = "MSDAORA.1" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbOracleProvider, System.Data" />
<add key="keyMapping" value = "servername=hostname;user=user id,user,uid;password=password,pwd;servicename=data source,sid;loginTimeout=connect timeout,connection timeout" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
</provider>
<!-- IMB DB2 driver -->
<provider>
<add key="url" value = "jdbc:db2://${servername}:${port}/${database}" />
<add key="driverClassName" value = "com.ibm.db2.jcc.DB2Driver" />
<add key="port" value = "50000" />
<add key="id" value = "IBMDADB2.1" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbDB2Provider, System.Data" />
<add key="keyMapping" value = "servername=hostname;user=user id,user,uid;password=password,pwd;database=data source;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
</provider>
</OleDbProviders>
<SqlClientProviders>
<!-- Microsoft SQLServer driver 2000 -->
<provider>
<add key="url" value = "jdbc:microsoft:sqlserver://${servername}:${port};DatabaseName=${database}" />
<add key="driverClassName" value = "com.microsoft.jdbc.sqlserver.SQLServerDriver" />
<add key="id" value = "SQLJDBC2000" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2000, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
</provider>
<!-- Microsoft SQLServer driver 2005 -->
<provider>
<add key="url" value = "jdbc:sqlserver://${servername}" />
<add key="driverClassName" value = "com.microsoft.sqlserver.jdbc.SQLServerDriver" />
<add key="id" value = "SQLJDBC2005" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2005, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
<add key="keyUnsupported" value="AttachDBFilename" />
</provider>
<!-- Microsoft SQLServer driver 2005 (default) -->
<provider>
<add key="url" value = "jdbc:sqlserver://${servername}" />
<add key="driverClassName" value = "com.microsoft.sqlserver.jdbc.SQLServerDriver" />
<add key="id" value = "SQLCLIENT" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OleDbSqlServerProvider2005, System.Data" />
<add key="keyMapping" value = "serverName=data source,server,address,addr;user=user id,user,uid;password=password,pwd;database=initial catalog,database;loginTimeout=connect timeout,connection timeout;" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
<add key="keyUnsupported" value="AttachDBFilename" />
</provider>
</SqlClientProviders>
<OracleClientProviders>
<!-- Oracle driver -->
<provider>
<add key="url" value = "jdbc:oracle:thin:@//${servername}:${port}/${servicename}" />
<add key="driverClassName" value = "oracle.jdbc.OracleDriver" />
<add key="port" value = "1521" />
<add key="id" value = "ORACLECLIENT" />
<add key="type" value = "Mainsoft.Data.Jdbc.Providers.OracleProvider, System.Data.OracleClient" />
<add key="keyMapping" value = "servername=hostname;user=user id,user,uid;password=password,pwd;servicename=data source,sid;loginTimeout=connect timeout,connection timeout" />
<add key="keyExclude" value="provider,jndi-datasource-name,naming-provider-url,naming-factory-initial,jdbcdriverclassname,jdbcurl" />
</provider>
</OracleClientProviders>
</Mainsoft.Data.Configuration>
<mainsoft.directoryservices>
<settings>
<add key="servername" value="localhost"/>
<add key="port" value="389"/>
<add key="securitymech" value="1.2.840.113554.1.2.2"/>
<add key="securityappname" value="com.mainsoft.system.directoryservices"/>
<add key="authenticationmech" value="GSSAPI"/>
</settings>
</mainsoft.directoryservices>
<mainsoft.drawing>
<icons>
<add key="Application" value="System.Drawing.resources.icons.application.png"/>
<add key="Asterisk" value="System.Drawing.resources.icons.asterisk.png"/>
<add key="Error" value="System.Drawing.resources.icons.error.png"/>
<add key="Exclamation" value="System.Drawing.resources.icons.exclamation.png"/>
<add key="Hand" value="System.Drawing.resources.icons.hand.png"/>
<add key="Information" value="System.Drawing.resources.icons.information.png"/>
<add key="Question" value="System.Drawing.resources.icons.question.png"/>
<add key="Warning" value="System.Drawing.resources.icons.warning.png"/>
<add key="WinLogo" value="System.Drawing.resources.icons.winlogo.png"/>
</icons>
<codecs>
<!-- This mimetypes are plugin depenand, for now jai_imageio.jar -->
<!-- and java built in imageio specified -->
<add key="557cf400-1a04-11d3-9a73-0000f81ef32e" value="image/bmp, image/x-bmp, image/x-windows-bmp"/>
<add key="557cf406-1a04-11d3-9a73-0000f81ef32e" value="image/png"/>
<add key="557cf402-1a04-11d3-9a73-0000f81ef32e" value="image/gif"/>
<add key="557cf401-1a04-11d3-9a73-0000f81ef32e" value="image/jpeg"/>
<add key="557cf405-1a04-11d3-9a73-0000f81ef32e" value="image/tiff"/>
</codecs>
<codecsmetadata>
<imageformat name="Bmp">
<xresolution default="96">//PixelsPerMeter/X</xresolution>
<yresolution default="96">//PixelsPerMeter/Y</yresolution>
<unitstype default="meter"></unitstype>
<unitscale value="meter" name="meter">.0254</unitscale>
</imageformat>
<imageformat name="Jpeg">
<xresolution default="96">//JPEGvariety/app0JFIF/@Xdensity</xresolution>
<yresolution default="96">//JPEGvariety/app0JFIF/@Ydensity</yresolution>
<unitstype default="1">//JPEGvariety/app0JFIF/@resUnits</unitstype>
<unitscale value="0" name="na">1.0</unitscale>
<unitscale value="1" name="inch">1.0</unitscale>
<unitscale value="2" name="cm">25.4</unitscale>
</imageformat>
<imageformat name="Png">
<xresolution default="96">//pHYs/@pixelsPerUnitXAxis</xresolution>
<yresolution default="96">//pHYs/@pixelsPerUnitYAxis</yresolution>
<unitstype default="inch">//pHYs/@unitSpecifier</unitstype>
<unitscale value="meter" name="meter">.0254</unitscale>
<unitscale value="inch" name="inch">1.0</unitscale>
<unitscale value="unknown" name="na">1.0</unitscale>
</imageformat>
<imageformat name="Tiff">
<xresolution default="96">//TIFFField[@name='XResolution']/TIFFRationals/TIFFRational/@value</xresolution>
<yresolution default="96">//TIFFField[@name='YResolution']/TIFFRationals/TIFFRational/@value</yresolution>
<unitstype default="2">//TIFFField[@name='ResolutionUnit']/TIFFShorts/TIFFShort/@value</unitstype>
<unitscale value="1" name="na">1.0</unitscale>
<unitscale value="2" name="inch">1.0</unitscale>
<unitscale value="3" name="cm">25.4</unitscale>
</imageformat>
</codecsmetadata>
</mainsoft.drawing>
</configuration>
-48
View File
@@ -1,48 +0,0 @@
<?xml version="1.0" encoding="utf-8" ?>
<settingsMap>
<map sectionType="System.Web.Configuration.MembershipSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
mapperType="Mono.Web.Util.MembershipSectionMapper, Mono.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756"
platform="Unix">
<!-- The 'what' tag specifies which region of the section to modify. The 'value' attribute value is mapper-specific and is not defined here. It can be
any expression understood by the mapper to designate the section region to modify.
-->
<what value="providers">
<!-- 'what' can contain any number of occurrences of any three elements:
replace - replace the designated region
add - add a new entry to the region
clear - clear the region
remove - remove the designatedregion
The attributes to any of the above are freeform and are not processed by the mapper manager. They are stored verbatim for the
mapper to peruse.
-->
<replace name="AspNetSqlMembershipProvider"
type="System.Web.Security.SqliteMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
connectionStringName="LocalSqliteServer" />
</what>
</map>
<map sectionType="System.Web.Configuration.RoleManagerSection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
mapperType="Mono.Web.Util.RoleManagerSectionMapper, Mono.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756"
platform="Unix">
<!-- The 'what' tag specifies which region of the section to modify. The 'value' attribute value is mapper-specific and is not defined here. It can be
any expression understood by the mapper to designate the section region to modify.
-->
<what value="providers">
<!-- 'what' can contain any number of occurrences of any three elements:
replace - replace the designated region
add - add a new entry to the region
clear - clear the region
remove - remove the designatedregion
The attributes to any of the above are freeform and are not processed by the mapper manager. They are stored verbatim for the
mapper to peruse.
-->
<replace name="AspNetSqlRoleProvider"
type="System.Web.Security.SqliteRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
connectionStringName="LocalSqliteServer" />
</what>
</map>
</settingsMap>
-150
View File
@@ -1,150 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.web>
<monoSettings>
<compilersCompatibility>
<compiler language="c#;cs;csharp" extension=".cs" compilerOptions="/nowarn:0169"
type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</compilersCompatibility>
</monoSettings>
<authorization>
<allow users="*" />
</authorization>
<httpHandlers>
<add verb="*" path="Trace.axd" type="System.Web.Handlers.TraceHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="UrlRouting.axd" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.aspx" type="System.Web.UI.PageHandlerFactory, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.asmx" validate="false" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.ashx" type="System.Web.UI.SimpleHandlerFactory, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="GET" path="WebResource.axd" type="System.Web.Handlers.AssemblyResourceLoader, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.master" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.resources" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.skin" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.browser" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.sitemap" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.webinfo" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.resx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.asax" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.ascx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.config" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.Config" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.cs" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.vb" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.csproj" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.vbproj" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.licx" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.dll" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*.rem" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="*" path="*.soap" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false" />
<add verb="*" path="*.svc" type="System.ServiceModel.Channels.SvcHttpHandlerFactory, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add verb="GET,HEAD" path="*" type="System.Web.StaticFileHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add verb="*" path="*" type="System.Web.HttpMethodNotAllowedHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpHandlers>
<httpModules>
<add name="FormsAuthentication" type="System.Web.Security.FormsAuthenticationModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="OutputCache" type="System.Web.Caching.OutputCacheModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="RoleManager" type="System.Web.Security.RoleManagerModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="UrlAuthorization" type="System.Web.Security.UrlAuthorizationModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpModules>
<authentication mode="Forms">
<forms name=".MONOAUTH" loginUrl="login.aspx" protection="All" timeout="30" path="/">
<credentials passwordFormat="Clear">
<!--<user name="gonzalo" password="gonz"/>-->
</credentials>
</forms>
</authentication>
<machineKey validationKey="AutoGenerate" decryptionKey="AutoGenerate" validation="SHA1" />
<globalization requestEncoding="utf-8"
responseEncoding="utf-8"
fileEncoding="utf-8"/>
<!--
culture="en-US"
uiculture="en-US" />
-->
<sessionState mode="InProc" />
<pages>
<namespaces>
<add namespace="System" />
<add namespace="System.Collections" />
<add namespace="System.Collections.Specialized" />
<add namespace="System.Configuration" />
<add namespace="System.Text" />
<add namespace="System.Text.RegularExpressions" />
<add namespace="System.Web" />
<add namespace="System.Web.Caching" />
<add namespace="System.Web.SessionState" />
<add namespace="System.Web.Security" />
<add namespace="System.Web.Profile" />
<add namespace="System.Web.UI" />
<add namespace="System.Web.UI.WebControls" />
<!-- <add namespace="System.Web.UI.WebControls.WebParts" /> -->
<add namespace="System.Web.UI.HtmlControls" />
</namespaces>
</pages>
<webControls clientScriptsLocation="/web_scripts" />
<compilation debug="false" defaultLanguage="c#" explicit="true" strict="false" >
<assemblies>
<!--<add assembly="mscorlib" /> -->
<add assembly="System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add assembly="System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add assembly="System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add assembly="System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add assembly="System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add assembly="System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add assembly="System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add assembly="*" /> <!-- Add assemblies in bin directory -->
</assemblies>
<expressionBuilders>
<add expressionPrefix="Resources"
type="System.Web.Compilation.ResourceExpressionBuilder, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add expressionPrefix="ConnectionStrings"
type="System.Web.Compilation.ConnectionStringsExpressionBuilder, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add expressionPrefix="AppSettings"
type="System.Web.Compilation.AppSettingsExpressionBuilder, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</expressionBuilders>
<buildProviders>
<add extension=".aspx" type="System.Web.Compilation.PageBuildProvider" />
<add extension=".ascx" type="System.Web.Compilation.UserControlBuildProvider" />
<add extension=".master" type="System.Web.Compilation.MasterPageBuildProvider" />
<add extension=".asmx" type="System.Web.Compilation.WebServiceBuildProvider" />
<add extension=".ashx" type="System.Web.Compilation.WebHandlerBuildProvider" />
<add extension=".soap" type="System.Web.Compilation.WebServiceBuildProvider" />
<add extension=".resx" type="System.Web.Compilation.ResXBuildProvider" />
<add extension=".resources" type="System.Web.Compilation.ResourcesBuildProvider" />
<add extension=".wsdl" type="System.Web.Compilation.WsdlBuildProvider" />
<add extension=".xsd" type="System.Web.Compilation.XsdBuildProvider" />
<add extension=".js" type="System.Web.Compilation.ForceCopyBuildProvider" />
<add extension=".lic" type="System.Web.Compilation.IgnoreFileBuildProvider" />
<add extension=".licx" type="System.Web.Compilation.IgnoreFileBuildProvider" />
<add extension=".exclude" type="System.Web.Compilation.IgnoreFileBuildProvider" />
<add extension=".refresh" type="System.Web.Compilation.IgnoreFileBuildProvider" />
</buildProviders>
</compilation>
<httpRuntime executionTimeout="110"
maxRequestLength="4096"
useFullyQualifiedRedirectUrl="false"
minFreeThreads="8"
minLocalRequestFreeThreads="4"
appRequestQueueLimit="5000" />
<clientTarget>
<add alias="ie5" userAgent="Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" />
<add alias="ie4" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="uplevel" userAgent="Mozilla/4.0 (compatible; MSIE 4.0; Windows NT 4.0)" />
<add alias="downlevel" userAgent="Unknown" />
</clientTarget>
<siteMap>
<providers>
<add name="AspNetXmlSiteMapProvider"
description="Default site map provider that reads in .sitemap xml files."
type="System.Web.XmlSiteMapProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
siteMapFile="Web.sitemap" />
</providers>
</siteMap>
</system.web>
</configuration>
-7
View File
@@ -1,7 +0,0 @@
assemblies_dir=@prefix@/lib/mono
Libraries=${assemblies_dir}/2.1/smcs.exe
Name: Mono Internal -- Do not use.
Description: Mono Internal Libraries -- Do not use
Version: @VERSION@
Libs: -r:smcs.exe
@@ -1,4 +0,0 @@
Name: System.Web.Extensions.Design
Description: System.Web.Extensions.Design ASP.NET 2.0 add-on
Version: 1.0.61025.0
Libs: -r:@prefix@/lib/mono/gac/System.Web.Extensions.Design/1.0.61025.0__31bf3856ad364e35/System.Web.Extensions.Design.dll
-4
View File
@@ -1,4 +0,0 @@
Name: System.Web.Extensions
Description: System.Web.Extensions ASP.NET 2.0 add-on
Version: 1.0.61025.0
Libs: -r:@prefix@/lib/mono/gac/System.Web.Extensions/1.0.61025.0__31bf3856ad364e35/System.Web.Extensions.dll
-5
View File
@@ -1,5 +0,0 @@
Name: WCF
Description: References WCF for compilation
Version: @VERSION@
Libs: -r:System.Runtime.Serialization.dll -r:System.IdentityModel.dll -r:System.IdentityModel.Selectors.dll -r:System.ServiceModel.dll -r:System.ServiceModel.Web.dll
+4
View File
@@ -0,0 +1,4 @@
Makefile.in
Makefile
all-docs
pending-classes.in
+37
View File
@@ -0,0 +1,37 @@
WEB_FILES= \
ado-net anoncvs asp-net books ccvs c-sharp class-library contact contributing devel-faq documentation download \
embedded-api faq firebird gcc-frontend hackers ideas index \
java jit-debug languages mailing-lists monodoc-xml mysql odbc \
oledb papers \
passport plans porting postgresql ppc projects rationale \
resources roadmap runtime sqlclient sqlite sybase tdsclient \
tds-providers team status team testing thanks tools \
porting anoncvs monodoc-xml winforms
OTHERS= pending resources-pending todo mono-build.sh mono-build-w32.sh
EXTRA_DIST = $(WEB_FILES) README $(OTHERS)
all-docs: $(WEB_FILES)
cat rationale roadmap c-sharp tools class-library \
runtime documentation download faq contributing \
resources status > all-docs
class-status: class-status.in pending-classes Makefile.am
cat class-status.in pending-classes > class-status
pending-classes:
#pending-classes: pending-classes.in Makefile.am
# echo "This is a list of pending classes, and links to their documentation on MSDN.Microsoft.com<p><p>" > pending-classes
# for i in `cat pending-classes.in`; do x=`echo $$i | sed s/\\\.//g`; link=`echo http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrf@@@ClassTopic.asp | sed "s/@@@/$$x/"`; echo " <a href=\"$$link\">$$i</a><br>" >> pending-classes; done
webit: dummy
(cd web; make && make push)
push-notes:
scp release-notes/mono* www@www:/web/cvsmodules/mono/archive
dummy:
BIN
View File
Binary file not shown.

After

Width:  |  Height:  |  Size: 448 B

+17
View File
@@ -0,0 +1,17 @@
To edit the website appearance:
cd doc/web
edit template.html.in
make
To edit website content:
cd doc (this directory)
edit files carefully
cd web
make
To publish changes:
cd web
make push
+240
View File
@@ -0,0 +1,240 @@
* ADO.NET
<p>Mono's ADO.NET Developers:
<ul>
<li>rodrigo -AT- ximian.comNOSPAM - <b>Rodrigo Moya</b> - coordinator
for the ADO.NET implementation and works on the OLE DB provider</li>
<li>danmorg -AT- sc.rr.comNOSPAM - <b>Daniel Morgan</b> - works on
the MySQL, PostgreSQL, and Oracle providers</li>
<li>tim -AT- timcoleman.comNOSPAM - <b>Tim Coleman</b> - works on
the Microsoft SQL Server, Sybase, and TDS providers</li>
<li>brianlritchie -AT- hotmail.comNOSPAM - <b>Brian Ritchie</b> - works on
the ODBC provider and the ProviderFactory</li>
<li>vladimir -AT- pobox.comNOSPAM - <b>Vladimir Vukicevic</b> - works on
the SQL Lite provider</li>
<li>cleared -AT- rogers.comNOSPAM - <b>Christopher Bockner</b> - works on
the IBM DB2 provider</li>
<li>vi64pa -AT- koti.soon.fiNOSPAM - <b>Ville Palo</b> - works on XML stuff in System.Data
including DataSet, XmlDataDocument, and has done lots of testing</li>
</ul>
* Action plan
<p>The current plan to implement ADO.NET is as follows:
<ul>
<li>Either create ADO.NET providers or modify pre-exiting ADO.NET providers to
work with Mono</li>
<ul>
<li>Create ADO.NET Providers
<ul>
<li><a href="http://www.go-mono.com/ibmdb2.html">IBM DB2 Universal Database</a></li>
<li><a href="http://www.go-mono.com/mysql.html">MySQL</a></li>
<li><a href="http://www.go-mono.com/odbc.html">ODBC</a></li>
<li><a href="http://www.go-mono.com/oracle.html">Oracle</a></li>
<li><a href="http://www.go-mono.com/oledb.html">OLE DB</a></li>
<li><a href="http://www.go-mono.com/postgresql.html">PostgreSQL</a></li>
<li><a href="http://www.go-mono.com/sqlclient.html">Microsoft SQL Server</a></li>
<li><a href="http://www.go-mono.com/sqlite.html">SQL Lite</a></li>
<li><a href="http://www.go-mono.com/sybase.html">Sybase</a></li>
<li><a href="http://www.go-mono.com/tdsclient.html">TDS Generic</a></li>
<li>Providers which we do not have, but we would like to have. Currently,
some of these databases are supported via the ODBC or OLEDB providers.</li>
<ul>
<li><a href="http://msdn.microsoft.com/library/en-us/dnsql2k/html/sqlxml_intromanagedclasses.asp?frame=true">Managed Classes for SqlXml</a> which is
a .NET data provider for retrieving XML data from a Microsoft SQL Server 2000 database. The System.Data.SqlClient provider
in Mono can be used as a starting point at mcs/class/System.Data/System.Data.SqlClient.</li>
<li><a href="http://www.hughes.com.au/">miniSQL</a></li>
<li><a href="http://www.sleepycat.com/">BerkeleyDB (Sleepycat)</a></li>
<li><a href="http://www.sapdb.org/">SapDB</a></li>
<li>Microsoft Access - could be done by creating C# bindings to <a href="http://mdbtools.sourceforge.net">MDB Tools</a></li>
<li>dbase or xbase type database files</li>
<li>Others are welcome</li>
</ul>
</ul></li>
<br>
<li>Modify Pre-existing ADO.NET Providers to work with Mono. This may
require fixing or implementing areas of Mono too.
<ul>
<li><a href="http://www.go-mono.com/firebird.html">Firebird Interbase</a></li>
<li><a href="http://gborg.postgresql.org/project/npgsql/projdisplay.php">Npgsql</a> is a
PostgreSQL Managed data provider written
in 100% C#, does not require a client library, and works on Mono</li>
<li><a href="http://sourceforge.net/projects/mysqlnet/">MySQLNet</a> is a
MySQL Manager data provider written in 100% C#, does not
require a client library, and works on Mono</li>
</ul>
</li>
</ul>
<br>
<li>Create Tools for Configuration, Testing, and Entering SQL Queries
<ul>
<li><b>SQL# CLI - a command-line tool</b> written in C# to
execute SQL commands,
test connection strings, and connect to various ADO.NET
providers in Mono. The SQL# CLI can be found in
mcs/tools/SqlSharp/SqlSharpCli.cs</li>
<li><p><b>SQL# GUI - a GUI tool</b> written in C# to
execute SQL commands.
Currently, there is SQL# For GTK# which
can be found at
mcs/tools/SqlSharp/gui/gtk-sharp
It has a SQL editor with
syntax hi lighting of SQL keywords. This will be
moving to its own cvs modeul sqlsharpgtk.</li>
<li><b>Configuration Command-Line and GUI Tools for ADO.NET</b>.
These tools have not been started. The tools would be written in
C# and run on Mono. The
configuration tool can be used to do the following:
<ul>
<li>setup DSNs for the ODBC and OLE-DB
providers and configurations for
their underlying libraries (unixODBC and libgda)</li>
<li>setup configurations for the Mono.Data.ProviderFactory
that Brian Ritchie created</li>
<li>setup native database client library configurations too, such as,
freetds.conf for Microsoft SQL Server and Sybase</li>
</ul>
</li>
</ul>
</ul>
* Current Status
<p>Variouls ADO.NET Providers have been created: PostgreSQL, MySQL, Sybase, SQL Lite,
Microsoft SQL Server, OLE DB, ODBC, and TDS Generic. See their respective web page for
more information.
<p>Constraints need lots of work
<p>TypeDataSetGenerator needs to be stubbed and implemented.
<p><b>DataSet, DataAdaptor, DataTable, DataRelation, DataRow, DataColumn,
DataColumnCollection, DataRowCollection, and others</b> need more work. There are
many classes that are just stubs and need to be implemented.
<p><b>XML support in System.Data</b> needs work. This involves working on
the classes: DataSet, XmlDataDocument, and the method ExecuteXmlReader() that
exists in a provider's class that implements IDbCommand, and others.
Stuart Caborn has started the XML support in a DataSet. Tim Coleman started
XML support in the ExecuteXmlReader() in a SqlCommand. Ville Palo has been
heavily modifying DataSet, XmlDataDocument, and other classes for reading
and writing XML.
<p><b>ADO.NET Provider Factory</b> has been started by Brian Ritchie. The
Provider Factory is way to dynamically create
connections, commands, parameters, and data adapters based on configuration information. The
provider factory also provides utility functions needed by a lot of
providers but are not exposed via the provider. The ProviderFactory
is found at mcs/class/Mono.Data and includes a test named test.cs for it in
mcs/class/Mono.Data/Test. Also, take a look at the sample .config file for the
test.exe application named test.exe.config. The .config file is automatically
read when you use the Mono.Data.ProviderFactory or Mono.Data.DataTools.
<p><b>Integration with ASP.NET</b> has not been started, such as, data binding
to a System.Web.UI.WebControls.DataGrid. This may involve implementing many classes
in System.Web and System.Data. If you want to help,
contact Gonzalo Paniagua Javier. Here is information about using ADO.NET in ASP.NET:
<ul>
<li>Take a look at xsp in cvs and look at the examples in test: dbpage1.aspx
and dbpage2.aspx:
<ul>
<li>Notice that the namespace System.Data is imported via <b>import</b></li>
<li>A NameValueCollection is gotten using ConfigurationSettings.AppSetings. These
settings are gotten from the file server.exe.config which is a XML file. The XML
file has a section appSettings. In the appSettings section, you have keys
for DBProviderAssembly, DBConnectionType, and DBConnectionString.
<ul>
<li><b>DBProviderAssembly</b> is the assembly of the ADO.NET provider.
For example:
"Mono.Data.PostgreSqlClient"</li>
<li><b>DBConnectionType</b> is the System.Type of the class that
implements System.Data.IDbConnection that is found
in the DBProviderAssembly.
For example:
"Mono.Data.PostgreSqlClient.PgConnection"</li>
<li><b>DBConnectionString</b> is the ConnectionString to set to the
IDbConnection object to use in opening a connection to a data source.
For Example:
"hostaddr=127.0.0.1;user=monotest;password=monotest;dbname=monotest"</li>
</ul>
<li>The function GetConnectionData() gets the database provider assembly, connection type,
and connection string parameters if they exist; otherwise, it uses default values. This is
done during the loading of the web page.</li>
<li>With the connection parameters, the assembly is loaded, the connection type is verified that
it implements IDbConnection and an instance of the class can be created, creates a instance
of the class, sets the connection string, and opens the connection.</li>
</ul>
</li>
</ul>
<p><b>Integration with Windows.Forms</b> has not been started, such as, data binding
to a System.Windows.Forms.DataGrid. This may involve implementing many classes
in System.Windows.Forms and System.Data.
<p><b>Integration with <a href="http://gtk-sharp.sourceforge.net/">GTK#</a></b>
has not been started, such as, data binding
to a GtkTreeView. This may involve creating new classes
to go between the glist data model and the ADO.NET data model.
Mike Kestner would be the best person to ask for help on GTK#.
<p><b>Integration with QT#</b> has not been started. Any information on
how this can be done is appreciated. Adam Treat would be the best
person to ask about QT#.
<p><b>Building System.Data</b>
<p>The System.Data.dll gets built with the rest of the class library.
To compile the System.Data.dll assembly separately, you need:
<b>On Unix</b>
<ul>
* update your mono sources. Be sure you have latest mcs.exe
and .dll's, since there have been many fixes needed for
compilation on Linux.
* compile System.Data.dll:
<pre>
cd mcs/class/System.Data<br>
mcs --target library -o \
System.Data.dll @list
</pre>
</ul>
<b>On Windows</b>
<ul>
* update your mono sources. Be sure you have latest mcs.exe
and .dll's. You can use the same method as Linux,
or you can use NAnt.
* To use NAnt:
<pre>
cd mcs/class/System.Data
../../nant/NAnt.exe
</pre>
* This will automatically copy the System.Data.dll to Test.
If you need to do a clean for the System.Data.dll assembly,<br><br>
<pre>
cd mcs/class/System.Data
../../nant/NAnt.exe clean
</pre>
</ul>
* Testing
<ul>
<li>Testing connection-oriented classes are done via the provider specific tests
<li><a href="http://www.go-mono.com/testing.html">Testing non-connection classes</a> are
done via mono's modified version of NUnit.</li>
</ul>
+70
View File
@@ -0,0 +1,70 @@
* Anonymous CVS access
Anonymous access to the Mono is available currently from three
servers (anoncvs-spain-1.go-mono.com,
anoncvs-spain-2.go-mono.com and anoncvs-us-1.go-mono.com).
You can also use `anoncvs.go-mono.com', and that will pick a
server automatically for you.
Sources are currently being updated every hour.
** Checking out the sources
To check out the sources for the first time from the
repository, use this command:
<pre>
export CVSROOT=:pserver:[email protected]:/mono
cvs login
cvs -z3 co mcs mono gtk-sharp
</pre>
That will get you the compiler and class libraries (mcs), the
interpreter and JITer (mono) and the Gtk# bindings.
The server is located in Spain.
** Updating the sources
To update your sources every day, you use this command:
<pre>
export CVSROOT=:pserver:[email protected]:/mono
cvs -z3 update -dP mcs mono gtk-sharp
</pre>
** Thanks
Thanks to <a href="http://www.hispalinux.es">HispaLinux</a>
for providing this Anon CVS server. The server is located in
Spain.
Special thanks to Jesus Climent, Rodrigo Moya, Juantomás
García and Ismael Olea for making this happen.
<a name="#mirror">
** Becoming an AnonCVS mirror
To become an AnonCVS mirror, you currently need about 40
megabytes of free disk space and bandwidth that you do not
mind sharing (you probably want enough to spare).
I need to be able to rsync to your machine from the main CVS
server. The preferred method to rsync is to setup ssh in your
machine.
The requirements are:
<ul>
* An account where we can ssh into.
* rsync.
* AnonCVS setup with the same paths as the rest of the
servers.
* Currently, about 40 megabytes of disk space, but this
will likely grow as the project evolves.
* A sysadmin contact e-mail address.
</ul>
Executable
+121
View File
@@ -0,0 +1,121 @@
* ASP.NET
ASP.NET support is divided in two pieces:
<ul>
* Web Forms (Web Applications infrastructure).
* Web Services (the SOAP-based rpc system).
</ul>
There is work underway for both systems. The Web Forms
support is more advanced at this point, and various ".aspx"
programs can be run using the Mono runtime (embedded into
either the XSP server or the mod_mono Apache module).
We are now working bug fixing and adding missing features
after making the whole pipeline compatible with MS.
Tim started work on the Web Services. Although we have a
SoapFormatter as part of the remoting infrastructure already
(contributed by Jesus), most people will be using the ASP.NET
Web Services support. Work for the supporting class libraries
just started recently.
** HttpRuntime
Patrik has authored most of the HttpRuntime support (both on
the System.Web and on the foundation).
We are currently working on this.
** XSP
This is where initial development of the .aspx/.ascx/.asax compiler
to C# took place. That compiler is now integrated in System.Web classes
mostly under System.Web.Compilation namespace.
We added a new web server that works with mono and MS runtime and is
being used to debug our classes. It resides in xsp/server. A couple of
classes of this new server can be reused/extended to make an apache
module/cgi using mono (MonoWorkerRequest and MonoApplicationHost).
There is also a bunch of .aspx pages to test the server along with
a few user controls under xsp/test.
You can check it out from CVS and run 'make install' to test it.
** Controls
A lot of work has been put in the various classes that
implement the controls (UI.HtmlControls and UI.WebControls),
but they have been coded mostly in the dark, and without being
able to test them in real life: Gaurav and Leen worked very
hard on this namespace.
We can now render all HtmlControls and almost all WebControls.
DataGrid and DataList controls are being finished by Gaurav.
Xml control needs some work on System.Xml related to XSL.
** Extending ASP.NET
Currently you have to reference in your ASP.NET the control
and all of its properties, which works fine if you have a GUI
designer, but is harder for people used to develop using text
editors.
Since we have a parser, we could extend this parser to allow
people to still use ASP.NET controls, using a simpler syntax.
For example people doing blogs and editing their templates
over the web probably do not want to use direct ASP.NET but a
wrapper around it.
* Web Forms: The pieces (historical)
There are a couple of components to the puzzle:
<ul>
* .aspx page parser (converts .aspx to C# code).
* System.Web.HttpRuntime support.
* Web controls (System.Web.UI.HtmlControls and
System.Web.UI.WebControls).
* Underlying infrastructure for the controls (System.Web.UI).
* HttpRuntime.ProcessRequest is the core of the ASP.NET
implementation.
</ul>
Gonzalo has been working on an ASP.NET parser that takes .aspx
files and generated the code required to run them (the code lives in
module `xsp' along with a little web server for testing).
Most of the runtime support was written by Patrik Torstensson
(now at Intel). This was interesting, because in order to implement
some of its features, Patrik had to go into the runtime/JIT engine and
he spent a few weeks doing work there.
The classes for running ASP.NET are being actively written.
Gaurav, Leen and Patrik worked in the core of the classes
required to run ASP.NET web application as well as a small
embeddable web server.
Duncan got our System.Web assembly to compile.
** How to Help
Testing and fixing HtmlControls, WebControls and validators is an
easy way to help.
In the CVS module XSP you can find a small web server used for
testing and a directory containing sample aspx pages.
You have some documentation under doc directory and in the README
file of each directory. They explain how to test our System.Web.
Testing is really easy!
As the server also works with MS runtime, you can use it to check
what the expected results are.
+37
View File
@@ -0,0 +1,37 @@
* C# Books
A Programmer's Introduction to C# - Second Edition: Eric Gunnerson
* Remoting
<a href="http://www.dotnetremoting.cc/book/AdvancedDotNetRemoting.asp">
Advanced .NET Remoting: Ingo Rammer</a>
* Compiler Implementation
Compilers - Principles, Techniques, and Tools: Alfred V. Aho, Ravi Sethi,
Jeffrey D. Ullman
Advanced Compiler Design Implementation: Steven S. Muchnick
Modern Compiler Implementation in C: Andrew W. Appel
A Retargetable C Compiler - Design and Implementation: C. Fraser, David
Hanson
* Reference Manuals
<a
href="http://developer.intel.com/design/pentium/manuals/24319101.pdf">Intel
Architecture Software Developer's Manual, Volume 2 - Instruction Set Reference Manual</a>
<a
href="http://www.caldera.com/developers/devspecs/abi386-4.pdf">System V ABI
- i386 Architecture Processor Supplement</a>
<a
href="http://www.caldera.com/developers/devspecs/mipsabi.pdf">System V ABI -
MIPS Processor supplement</a>
<a href="http://www.sparc.org/standards/V8.pdf">The SPARC Architecture
Manual Version 8</a>
+207
View File
@@ -0,0 +1,207 @@
* MCS: The Ximian C# compiler
MCS is currently able to compile itself and many more C#
programs (there is a test suite included that you can use).
It is routinely used to compile Mono, roughly half a million
lines of C# code.
We are in feature completion mode right now. There are still
a couple of areas that are not covered by the Mono compiler, but
they are very very few at this point (security attributes),
you can also browse the MCS <a href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FMCS&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">bugs</a> from Bugzilla.
A test suite is maintained to track the progress of
the compiler and various programs are routinely compiled and
ran.
** Slides
Slides for the Mono C# Compiler presentation at .NET ONE are
available <a
href="http://primates.ximian.com/~miguel/slides-europe-nov-2002/Mono_C_Sharp_Overview_1007.sxi">here</a>
in StarOffice format.
** Obtaining MCS
The Mono C# compiler is part of the `mcs' module in the Mono CVS
you can get it from our <a href="anoncvs.html">Anonymous CVS</a> server,
or you can get nightly <a href="download.html">download page</a>.
** Running MCS
MCS is written in C# and uses heavily the .NET APIs. MCS runs
on Linux with the Mono runtime and on Windows with both the
.NET runtime and the Mono runtime.
** Reporting Bugs in MCS
When you report a bug, try to provide a small test case that would
show the error so we can include this as part of the Mono C# regression
test suite.
If the bug is an error or a warning that we do not flag, write
a sample program called `csXXXX.cs' where XXXX is the code number
that is used by the Microsoft C# compiler that illustrates the
problem. That way we can also do regression tests on the invalid
input.
** Phases of the compiler
The compiler has a number of phases:
<ul>
* Lexical analyzer: hand-coded lexical analyzer that
provides tokens to the parser.
* The Parser: the parser is implemented using Jay (A
Berkeley Yacc port to Java, that I ported to C#).
The parser does minimal work and syntax checking,
and only constructs a parsed tree.
Each language element gets its own class. The code
convention is to use an uppercase name for the
language element. So a C# class and its associated
information is kept in a "Class" class, a "struct"
in a "Struct" class and so on. Statements derive
from the "Statement" class, and Expressions from the
Expr class.
* Parent class resolution: before the actual code
generation, we need to resolve the parents and
interfaces for interface, classe and struct
definitions.
* Semantic analysis: since C# can not resolve in a
top-down pass what identifiers actually mean, we
have to postpone this decision until the above steps
are finished.
* Code generation: The code generation is done through
the System.Reflection.Emit API.
</ul>
** CIL Optimizations.
The compiler performs a number of simple optimizations on its input:
constant folding (this is required by the C# language spec) and
can perform dead code elimination.
Other more interesting optimizations like hoisting are not possible
at this point since the compiler output at this point does not
generate an intermediate representation that is suitable to
perform basic block computation.
Adding an intermediate layer to enable the basic block
computation to the compiler should be a simple task, but we
are considering having a generic CIL optimizer. Since all the
information that is required to perform basic block-based
optimizations is available at the CIL level, we might just skip
this step altogether and have just a generic IL optimizer that
would perform hoisting on arbitrary CIL programs, not only
those produced by MCS.
If this tool is further expanded to perform constant folding
(not needed for our C# compiler, as it is already in there)
and dead code elimination, other compiler authors might be
able to use this generic CIL optimizer in their projects
reducing their time to develop a production compiler.
** History
MCS was able to parse itself on April 2001, MCS compiled itself
for the first time on December 28 2001. MCS became self hosting
on January 3rd, 2002.
The Mono Runtime and the Mono execution engine were able to make
our compiler self hosting on March 12, 2002.
** Questions and Answers
Q: Why not write a C# front-end for GCC?
A: I wanted to learn about C#, and this was an exercise in this
task. The resulting compiler is highly object-oriented, which has
lead to a very nice, easy to follow and simple implementation of
the compiler.
I found that the design of this compiler is very similar to
Guavac's implementation.
Targeting the CIL/MSIL byte codes would require to re-architecting
GCC, as GCC is mostly designed to be used for register machines.
The GCC Java engine that generates Java byte codes cheats: it does
not use the GCC backend; it has a special backend just for Java, so
you can not really generate Java bytecodes from the other languages
supported by GCC.
Q: If your C# compiler is written in C#, how do you plan on getting
this working on a non-Microsoft environment.
We will do this through an implementation of the CLI Virtual
Execution System for Unix (our JIT engine).
Our JIT engine is working for the purposes of using the compiler.
The supporting class libraries are being worked on to fully support
the compiler.
Q: Do you use Bison?
A: No, currently I am using Jay which is a port of Berkeley Yacc to
Java that I later ported to C#. This means that error recovery is
not as nice as I would like to, and for some reason error
productions are not being caught.
In the future I want to port one of the Bison/Java ports to C# for
the parser.
Q: Should someone work on a GCC front-end to C#?
A: I would love if someone does, and we would love to help anyone that
takes on that task, but we do not have the time or expertise to
build a C# compiler with the GCC engine. I find it a lot more fun
personally to work on C# on a C# compiler, which has an intrinsic
beauty.
We can provide help and assistance to anyone who would like to work
on this task.
Q: Should someone make a GCC backend that will generate CIL images?
A: I would love to see a backend to GCC that generates CIL images. It
would provide a ton of free compilers that would generate CIL
code. This is something that people would want to look into
anyways for Windows interoperation in the future.
Again, we would love to provide help and assistance to anyone
interested in working in such a project.
Q: What about making a front-end to GCC that takes CIL images and
generates native code?
A: I would love to see this, specially since GCC supports this same
feature for Java Byte Codes. You could use the metadata library
from Mono to read the byte codes (ie, this would be your
"front-end") and generate the trees that get passed to the
optimizer.
Ideally our implementation of the CLI will be available as a shared
library that could be linked with your application as its runtime
support.
Again, we would love to provide help and assistance to anyone
interested in working in such a project.
Q: But would this work around the GPL in the GCC compiler and allow
people to work on non-free front-ends?
A: People can already do this by targeting the JVM byte codes (there
are about 130 compilers for various languages that target the JVM).
Q: Why are you writing a JIT engine instead of a front-end to GCC?
A: The JIT engine and runtime engine will be able to execute CIL
executables generated on Windows.
You might also want to look at the <a href="faq.html#gcc">GCC</a>
section on the main FAQ
+194
View File
@@ -0,0 +1,194 @@
* CVS Access
If you are an active Mono developer, you can get a CVS account
that hosts the Mono source code. This web page contains
details about how to use the CVS server as well as the
policies to use it.
If you are not a developer, but want to track the development, please
see the <a href="anoncvs.html">AnonCVS</a> instructions.
Send an e-mail to miguel with your public OpenSSH key for this
purpose. Please specify if the key was generated with SSH version 1
or version 2.
* Policies
Here are some policies about the use of the Mono CVS server.
** Code License
If you are about to commit code to a module, the code that is
being commited should be released under the same license as
the code that the module has.
Check the license if you are unsure, but it is basically:
class libraries X11; compiler and tools: GPL; runtime: LGPL.
If in doubt, check with the maintainers of the module, or send
mail to [email protected].
** Commiting code.
If you are the maintainer for a piece of code, feel free to
commit code, and delegate the work to others.
Use ChangeLog entries so we can keep textual descriptions of
your work, and use the contents of your ChangeLog file as the
CVS commit message (ie, paste the contents of this into the
editor buffer).
If you are making changes to someone else's code, please make
sure you get in touch with the maintainer of that code before
applying patches. You want to avoid commiting conflicting
work to someone else's code.
Please do not commit code that would break the compile to the
CVS, because that normally wastes everybody's time. Two things
are important in this step: trying to build your sources and making
sure that you add all the new files before you do a commit.
* Using CVS.
This is a small tutorial for using CVS.
** Generating an SSH key
If you are using SSH version 2, please generate your key using:
<pre>
ssh-keygen -t rsa
</pre>
And mail me the id_rsa.pub file.
If you are using SSH version 1, run:
<pre>
ssh-keygen
</pre>
And mail me your identity.pub file.
If you are using SSH from SSH Communications Security (they offer
a free SSH client for personal use), you have to use OpenSSH to
convert your public key to the required format. You have to use
OpenSSH's ssh-keygen program and write the following:
<pre>
ssh-keygen -i -f id_XXX.pub > my_public_key.pub
</pre>
where the file id_XXX.pub is your public key file,
normally located under ~/.ssh/ or ~/.ssh2/.
Send to miguel the my_public_key.pub file.
The *exact* format for this file must be:
<pre>
ssh-rsa XXXXX....
</pre>
You will need CVS and SSH. Windows users can get both by
installing Cygwin (<a
href="http://www.cygwin.com">http://www.cygwin.com</a>)
Unix users will probably have those tools installed already.
** Checking out the sources
To check out the sources for the first time from the
repository, use this command:
<pre>
export CVS_RSH=ssh
export [email protected]:/cvs/public
cvs -z3 co mcs mono
</pre>
** Updating your sources
Every day people will be making changes, to get your latest
updated sources, use:
<pre>
cvs -z3 update -Pd mcs mono
</pre>
Note: The '-z3' enables compression for the whole cvs action.
The '-Pd' makes the update operation (P)rune directories that
have been deleted and get new (d)irectories added to the
repository.
** Making patches
Usually you will want to make a patch to contribute, and let
other people review it before commiting it. To obtain such a
"patch", you type:
<pre>
cd directory-you-want-to-diff
cvs -z3 diff -u > file.diff
mail [email protected] < file.diff
</pre>
** Keeping track of changes.
We provide two e-mail based mechanisms to keep track of
changes to the code base:
<ul>
* <a href="mailto:[email protected]">
[email protected]</a>: This mailing list receives
in patch form all the changes that are being made to the
CVS.
* <a href="mailto:[email protected]">
[email protected]</a>: This mailing list only
receives the CVS commit logs with a list of files
modified.
</ul>
We hope to offer LXR and Bonsai in the future as well.
** Commiting your work
Once you get approval to commit to the CVS, or if you are
commiting code that you are the maintainer of, you will want
to commit your code to CVS.
To do this, you have to "add" any new files that you created:
<pre>
cvs add new-file.cs
</pre>
And then commit your changes to the repository:
<pre>
cvs commit file-1.cs file-2.cs
</pre>
* The Mailing Lists
To keep track of the various development and changes to the
CVS tree, you can subscribe to the [email protected].
To subscribe, send an email message to
[email protected] and in the body of the
message put `subscribe'.
This will send you an email message every time a change is
made to the CVS repository, together with the information that
the author of the changes submitted.
You might also want to track the live changes, subscribe to
the <a
href="mailto:[email protected]">[email protected]</a>
to receive the patches as they are checked into CVS.
** Recommendations
To build the sources, most of the type trying the `make' command
is enough. In some cases (the class libraries) we use nant, so
you need to run nant manually.
+190
View File
@@ -0,0 +1,190 @@
* The Class Library
The Class Library should be compatible with Microsoft's .NET
implementation.
Please see the <a href="class-status.html">Class Status</a>
page for a status of who is working on which classes.
We will write as much code as possible in C#. We may need to
interface with code written in C to gain access to the
functionality of libraries like libart, Gtk+, and libc.
** Contributing
We welcome contributions to the the Class Library. To get
started, check the status page for information about which
APIs are being worked on, and how to get in touch with
individual maintainers.
If you want to work on a class, first check the <a
href="download.html">Classes Distribution</a> to see if it is
not implemented yet, if not, check the <a
href="class-status.html">Class Status</a> to see if someone is
already working on it, and maybe contact them.
If nobody is working on it, mail <a
href="mailto:[email protected]">[email protected]</a>
with the class you want to implement and CC <a
href="mailto:[email protected]">[email protected]</a>.
You can also track live the activities of the Mono CVS module
by subscribing to the <a
href="http://lists.ximian.com/mailman/listinfo/mono-cvs-list">mono-cvs-list</a>
** Missing features
Our class libraries miss some features, for example, most classes
do not implement the serialization bits at all, it would be a good
contribution to add this to each class.
This is a simple task, but it needs to be done in a compatible way
with the Microsoft.NET classes: using the same arguments to serialize
and reincarnate data.
** Layout
The Class Library resides in the `mcs' module in the directoy
`class'.
Each directory in the directory represents the assembly where
the code belongs to, and inside each directory we divide the
code based on the namespace they implement.
There are two cases when we should consider portability: when
we are dealing with a couple of classes only that differ from
system to system (Consider System.Net and System.IO for Win32
and Unix). In those cases we will just place the files for
example on <t>corlib/System/System.IO/Unix-Console.cs</t> and
<t>corlib/System/System.IO/Win32-Console.cs</t>.
For classes that might differ more (for example, the
implementation of Windows.Forms), we might have different
directories altogether: <t>System.Windows.Forms/Win32</t>,
<t>System.Windows.Forms/Gtk+</t> and
<t>System.Windows.Forms/Cocoa</t>.
** Using existing components from GNOME.
Our current plan is to implement the GUI tools on top of
Gtk+. The only obstacle here is that applications from Windows
might expect to be able to pull the HWND property from the
widgets and use PInvoke to call Windows functions.
** Class Library and Win32 dependencies.
There are a few spots where the Win32 foundation is exposed to
the class library (for example, the HDC and HWND properties in
the GDI+). Casual inspection suggests that these can be
safely mapped to Gdk's GC and GdkWindow pointers without
breaking anything.
The only drawback is that support for PInvoke of Win32 code
won't be available. An alternate solution would be to use
portions of Wine, or even to use Wine as our toolkit.
*** Initial GDI+ and WinForms implementation
The initial implementation will use Gtk+ as the underlying
toolkit. Since GTK+ has already been ported to many windowing
systems other than X (including frame buffer, Win32, and BeOS)
its use should cover most applications for most users.
*** Database access
We will implement ADO.NET functionality by reusing <a
href="http://www.gnome-db.org">GNOME-DB</a>. This is an ideal
choice, since GNOME-DB was implemented precisely to provide an
ADO-like system for GNOME.
*** Component Integration
We will provide a new namespace to use GNOME specific features
as well as a namespace to host Bonobo interfaces and classes
in Mono.
** Licensing
The class library is being licensed under the terms of the
<a
href="http://www.opensource.org/licenses/mit-license.html">MIT
license.</a> This is the same license used by the X11 window
system.
** Class Library testing
We need to write regression tests that will verify
the correctness of the class library, compiler, and JIT
engine.
Please write your regression tests using <a
href="http://nunit.sourceforge.net">NUnit</a>
** Coding conventions
Please follow the conventions on the ECMA specification (On
the Annex Partition) for your coding your libraries.
Use 8 space tabs for writing your code (hopefully we can keep
this consistent). If you are modifying someone else's code, try
to keep the coding style similar.
For a rationale on 8 space tabs, read Linus Torvald's Coding
Style guidelines in the Linux kernel source for a rationale.
*** Missing implementation bits
If you implement a class and you are missing implementation bits,
please put in the code the word "TODO" and a description of what
is missing to be implemented.
*** Tagging buggy code
If there is a bug in your implementation tag the problem by using
the word "FIXME" in the code, together with a description of the
problem.
Do not use XXX or obscure descriptions, because otherwise people
will not be able to understand what you mean.
*** Tagging Lame specs
Sometimes the specification will be lame (consider Version.ToString (fieldCount)
where there is no way of knowing how many fields are available, making the API
not only stupid, but leading to unreliable code).
In those cases, use the keyword "LAMESPEC".
** Namespaces
We are using a number of namespaces in the class libraries for
private classes when we need them, you are encouraged to use these:
<pre>
Mono
.Languages // General Compiler classes
.CSharp // Specific C# parsing/tokenizing classes
.MonoBASIC // Specific VB.NET/MonoBASIC parsing/tokenizing classes
.Python // Specific Python parsing/tokenizing classes
.Runtime
.LateBind // General latebinding-support for MonoBASIC/Python
.MonoBASIC // Specific runtime classes for MonoBASIC programs
.Python // Specific runtime classes for Python programs
.Web
.UI
.Utils // Gaurav utility classes
</pre>
** FAQ
Frequently asked questions about the class library:
Q: I am writing a new class that overrides one of the system classes,
and I am getting a 1595 warning from the compiler. Should we use a
different namespace?
A: There is a quick solution to the problem, you can pass the command
line argument /nowarn:1595 and this will effectively let you use
your implementation of the code, while overriding the ones from the
system assemblies.
+51
View File
@@ -0,0 +1,51 @@
* Status of the various pieces of the class library
Classes in Mono are organized by the assembly that they belong to.
Here is the status of the different assemblies:
<ul>
<li><a href="http://www.go-mono.com/class-status-corlib.html">corlib</a>: The core library.
<li><a href="http://www.go-mono.com/class-status-System.html">System</a>.
<li><a href="http://www.go-mono.com/class-status-System.Xml.html">System.Xml</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Data.html">System.Data</a>:
Database access functionality (also check the <a href="ado-net.html">Mono ADO.NET status</a> pages).
<li><a href="http://www.go-mono.com/class-status-System.Drawing.html">System.Drawing</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Web.html">System.Web</a>:
ASP.NET classes, also check the <a href="asp-net.html">Mono ASP.NET status pages</a>
<li><a href="http://www.go-mono.com/class-status-System.Web.Services.html">System.Web.Services</a>.
<li><a
href="http://www.go-mono.com/class-status-Microsoft.VisualBasic.html">Microsoft.VisualBasic</a>:
Support runtime for Visual Basic applications
<li><a
href="http://www.go-mono.com/class-status-System.Windows.Forms.html">Windows.Forms</a>:
there is also a <a
href="http://lists.ximian.com/mailman/listinfo/mono-winforms-list">mailing
list available</a>
<li><a href="http://www.go-mono.com/class-status-System.EnterpriseServices.html">EnterpriseServices</a>.
<li><a
href="http://www.go-mono.com/class-status-System.Runtime.Serialization.Formatters.Soap.html">System.Runtime.Serialization.Formatters.Soap</a>.
</ul>
* List of not-implemented classes
Pick from the list of assemblies in the menu on the left to
view the current status of that assembly.
The tree shows items that are either missing or that have TODO
attributes associated with them.
You can use the checkboxes to show only missing or only TODO items.
Clicking on a name will take you to the <a href="http://msdn.microsoft.com/">MSDN documentation</a> for that item.
CTRL-Clicking will take you to the <a href="http://cvs.hispalinux.es/cgi-bin/cvsweb/?cvsroot=Mono">mono CVS tree</a>.
+62
View File
@@ -0,0 +1,62 @@
* Class Library Documentation
** Summary
While using inline XML tags to document classes is certainly
convenient, properly verbose documentation quickly overwhelms
the code, making the source quite difficult to read. Furthermore,
multilingual documentation makes for significant additional text.
With these considerations in mind, Mono will use external XML files
for type documentation, rather than documenting the source inline.
Several tools will be created for managing, verifying, generating,
and updating class library documentation, including:
<ul>
<li><a href="#monodoc">MonoDoc - A graphical documentation editor and viewer.</a></li>
<li><a href="#mkmaster">MkMaster - A command line tool to feed stub information to MonoDoc.</a></li>
<li><a href="#aspnet">An ASP.NET documentation editor.</a></li>
<li><a href="#xsltool">An xsl tool to convert monodoc xml to html documentation.</a></li>
</ul>
** XML Documentation Files and Formats
*** Monodoc XML
This XML is Mono's documentation format. Documentation and a DTD/Schema
for Monodoc XML is located in cvs and can be found <a href="http://go-mono.org/monodoc.dtd">here</a>.
This XML could be generated by MonoDoc or the ASP.NET client.
More about the XML format <a href="http://go-mono.org/monodoc-xml.html">here</a>.
** Documentation Tools
*** <a name="monodoc">MonoDoc</a>
A graphical documentation editor and viewer. Currently, MonoDoc
consists of a Qt# application and is in heavy development.
*** <a name="mkmaster">MkMaster</a>
This tool creates the Master.xml file that MonoDoc uses as a reference
for documentation generation. This is a reflection engine that is used
to gather metadata from assemblies and create an xml representation.
*** <a name="aspnet">ASP.NET</a>
This tool is planned.
*** <a name="xsltool">An XSL converter</a>
This tool is planned. If someone wants to step forward and adopt this
project, it would be very helpful ;)
** Status and Roadmap
*** 16, September 2002
A preliminary version of MonoDoc is in Mono's cvs. It is under heavy development.
Once this is complete we will start documenting the API!
** Get Involved
Help us develop Mono's documentation tools! Subscribe to
<a href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mono-docs-list</a>
and wade right in.
+13
View File
@@ -0,0 +1,13 @@
* Contacting the Mono team.
You can contact the general forum of discussion by sending
e-mail to <a href="mailto:[email protected]">[email protected]</a>
You can contact me (Miguel de Icaza) by sending e-mail to <a
href="mailto:[email protected]">[email protected]</a>. My web
page is <a
href="http://primates.ximian.com/~miguel">http://primates.ximian.com/~miguel"</a>
You can also <a
href="http://www.ximian.com/about_us/contact/">reach Ximian.</a>
+227
View File
@@ -0,0 +1,227 @@
* Contributing to the Mono project
Mono has not been completed yet. It is a project under
active development and with a vibrant community. If you are
looking at ways of helping the project, you have come to the
right web page.
There are three different philosophical approaches to helping
the Mono project, the selfish way, the altruistic or the
educational way.
The <b>selfish</b> way is packed with adventure. You start by
building your own software, and start using the compiler and
tools that come with Mono. Eventually you will run into
missing features, or a bug in the software. Since we ship all
the source code for Mono, you can start tracking down the
problem. Depending on how much time you have to devote to the
problem you could: <a href="http://bugzilla.ximian.com">File a
bug report</a>; track down the problem and provide a better
<a href="http://bugzilla.ximian.com">bug report</a>; fix the
bug and provide a patch (you can <a
href="mailto:[email protected]">post it</a> to the <a
href="http://lists.ximian.com/mailman/listinfo/mono-list">mono
mailing list</a>; or discuss the solution on the mailing
list. Ideally you will also write a <a
href="testing.html">regression test</a> so the bug does not
get re-introduced in the future.
The <b>altruistic</b> is probably the easiest because you get
to pick a piece of Mono that you might want to work on. You
can pick an unfinished <a href="class-library.html">class</a> (from our <a
href="class-status.html">class status page</a>); help with the
<a href="documentation.html">documentation effort</a> (<a
href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mailing
list for the documentation effort</a>); fix existing <a
href=http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FClass+Libraries&product=Mono%2FRuntime&component=CORLIB&component=misc&component=System&component=System.Web&component=System.XML&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">runtime
bugs</a>; <a
href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FMCS&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&newqueryname=&order=Reuse+same+sort+as+last+time&form_name=query">compiler
bugs</a>; help with the <a href="tools.html">tools</a> or
writing <a href="testing.html">tests</a> that help make Mono
more robust or help with the <a
href="http://www.go-mono.com/winforms.html">Winforms
effort</a>.
The <b>educational</b> way is an interesting one, because you
pick a technology you are interested in, and work on that
technology to learn the technology.
Those are just broad things that need to be worked on, but
something that would help tremendously would be to help with
small duties in the project that need to be addressed.
You can see what needs to be done in the class libraries <a href="class-status.html">here</a>
* IRC Channel
Many developers get together on the <b>#mono</b> irc channel
on the <b>irc.gnome.org</b> server.
** To start contributing
As a programmer, you can contribute in three different scenarios to Mono:
<ul>
* If you only have Linux/Unix.
* If you only have Windows.
* If you have both Linux and Windows.
</ul>
You might also want to check our <a href="#setup">common
setups</a> section that describes some common setups that people
use while working on Mono.
*** Contributing to the class library, regression tests or the compiler
This only requires Windows currently.
To start developing classes or to contribute to the compiler,
you only need Windows and the .NET Framework 1.0 SDK. Please notice
that you do not need Visual Studio (although you can use it if
you want). The .NET Framework SDK requires some version of
Windows XP or Windows NT. If you are running Windows 98, 95
or Me, you could use instead the <a
href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/001/829/msdncompositedoc.xml">.NET Redist package</a>, but it
lacks the documentation browser and the ildasm program (C#, VB, JScript and IL
assembler are included).
You can get it <a href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/000/976/msdncompositedoc.xml&frame=true">here</a>
If you are new to .NET, writing regression tests is a good way
of starting to contribute: it will help you get used to C# as
well as getting comfortable with the .NET APIs.
This helps because at this point you might be the best
qualified person to fix a problem found by the regression
test, or you might have a new class to implement in the .NET
world that only has a test suite.
To get started writing tests see the <a href="testing.html">Test Suite</a>
section. <a href="mono-contribution-howto.html">Here</a> there is a good All-In-One introduction to the art of writing tests.
*** Contributing to the runtime engine
This only requires Linux, currently some tasks are easier if you
have access to Windows as well.
Here are a few things you can do:
<ul>
* Port the runtime to other architectures.
* Port the runtime to other operating systems.
* Finish the IL code verifier in the runtime.
* Hack the JIT, improve the code generator, add new
pattern rules, improve the register allocator.
* Implement the debugging interfaaces
</ul>
** Bug reporting
If you find bugs in Mono, please make sure you enter a bug
report so we can keep track of problems in Mono.
To enter bug reports go to <a href="http://bugzilla.ximian.com">
http://bugzilla.ximian.com</a> and enter bug reports against
your favorite component (Mono, Runtime, C# compiler).
You can review the list of current bugs by going <a href="http://bugzilla.ximian.com/buglist.cgi?product=Mono%2FClass+Libraries&product=Mono%2FMCS&product=Mono%2FRuntime&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=&emailtype1=substring&emailassigned_to1=1&email2=&emailtype2=substring&emailreporter2=1&changedin=&chfieldfrom=&chfieldto=Now&chfieldvalue=&short_desc=&short_desc_type=substring&long_desc=&long_desc_type=substring&bug_file_loc=&bug_file_loc_type=substring&keywords=&keywords_type=anywords&op_sys_details=&op_sys_details_type=substring&version_details=&version_details_type=substring&cmdtype=doit&order=%27Importance%27&form_name=query">here</a>
** Small tasks
A few smaller tasks are here, dropped in no particular order:
<ul>
* <b>Mono/doc and web site:</b> They need to be
packaged up in the official `distribution'
* Adding serialization support to all the classes.
We have many classes, but we have not implemented in
many cases the serialization and re-incarnation support in
them (this is pretty straight forward code, and simple,
but there is a lot to be done here).
</ul>
* Emacs support
Brad Merryl's C# mode for Emacs is available: <a
href="http://www.cybercom.net/~zbrad/DotNet/Emacs/">http://www.cybercom.net/~zbrad/DotNet/Emacs/</a>
* Books on C# and DotNet.
<ul>
* Dotnet Books (<a href="http://www.dotnetbooks.com">http://www.dotnetbooks.com</a>)
* Dotnet Resources (<a href="http://www.dotnetexperts.com/resources/">
http://www.dotnetexperts.com/resources</a>)
* O'Reilly C# Essentials (<a href="http://www.oreilly.com/catalog/csharpess/">
http://www.oreally.com/catalog/csharpess</a>)
* O'Really .NET Essentials (<a href="http://www.oreilly.com/catalog/dotnetfrmess/">
http://www.oreally.com/catalog/dotnetfrmess</a>)
</ul>
<a name="setup">
* Common Setups
People running both Linux and Windows while contributing to
Mono use a number of tricks to increase their productivity.
Scenarios:
<ul>
* <b>Linux host and Windows host</b>
The Windows file system is shared (right click on
your hard drive icon, and select sharing, allow this
to be shared).
The Windows machine has the required build tools
(cygwin, and the .NET framework). On the Windows
machine, you want to setup the ssh server (run the
ssh-host-config program to configure your ssh) and
run it (from a cygwin terminal, type: /usr/sbin/sshd).
From the Linux side, you want to mount the Windows
file system, using something like this:
<tt><pre>
mount -t smbfs -o uid=miguel,username="Miguel de Icaza" "//quack/c$" /mnt
</pre></tt>
In the above example, my Linux user name is
`miguel', and this will allow this user to have
read/write access to the share.
The host name is `quack', and the name of the share
is `c$' (that is the C: partition).
The file system is accessible on /mnt.
You can perform your cvs update and cvs commits from
the /mnt directory, and run Emacs or your favorite
Linux text editor on the Unix side in this way.
Then from another terminal, you can ssh into your
Windows box using ssh, like this: ssh "Miguel de Icaza@quack"
</ul>
* Special Note
If you have looked at Microsoft's implementation of .NET or
their shared source code, you may not be able to contribute
to Mono. Details will follow when we know more about this.
In general be careful when you are implementing free software
and you have access to proprietary code. We need to make sure
that we are not using someone else's copyrighted code
accidentally.
Please do not use the <b>ildasm</b> program to disassemble
proprietary code when you are planning to reimplement a class
for Mono. If you have done this, we might not be able to use
your code.
Please stick to published documentation for implementing any
classes.
+275
View File
@@ -0,0 +1,275 @@
* Cryptography
In the .NET framework cryptography can be found under a number of
namespaces in several assemblies.
** Assembly: corlib
*** Namespace: <b>System.Security.Cryptography</b>
Thanks to the work of many people this namespace is almost complete.
**** Status
<ul>
* Every classes are present.
* Most classes have their unit tests. Some tests like <code>
SymmetricAlgorithmTest</code> are generated by an external
tool.
</ul>
**** TODO
<ul>
* Support for adding/modifying algorithms and OID using the
<code>machine.config</code> configuration file (in progress).
* RNGCryptoServiceProvider is currently only working on Linux.
The current implementation reside in Mono's runtime and use
the <code>/dev/[u]random</code> device (which do not exists
under Windows). A Windows alternative is in the work...
* Keypair persistance for RSA and DSA. This persistance must
somehow be linked with X509 certificate stores (in planning).
* <code>PasswordDeriveBytes</code> is currently limited to
generating keys with the maximum length equals to the hash
output (as specified in PKCS #5). However the framework
implementation allows for longer keys to be generated. Also
the algorithms used by CryptDeriveKey (used by Windows
applications) are unknown.
* Analyse the current coverage of the unit tests on the
cryptographic classes and complete the unit tests.
* Optimizations (performance) on most class are possible. Some
have been done using the Community Edition of BoundChecker
(a free VisualStudio addon) - recommanded!
</ul>
**** Notes
<ul>
* All cryptographic algorithms are entirely managed, including
classes named <code>*CryptoServiceProvider</code>, with the
exception of <code>RNGCryptoServiceProvider</code> (which
resides in the runtime).
</ul>
*** Namespace: <b>System.Security.Cryptography.X509Certificates</b>
**** Status
<ul>
* X.509 certificates are parsed using 100% managed code.
* Software Publisher Certificates (SPC) used by Authenticode
(tm) to sign assemblies are supported (extraction from PE
files) but <b>not</b> validated.
* Tests are generated from a set of existing certificates
(about a dozen) each having different properties. Another
set of certificates (more than 300) are used for a more
complete test (but isn't part of the test suite for size
and time consideration).
</ul>
**** TODO
<ul>
* Authenticode(tm) support is incomplete. We can extract the
certificates from PE files but cannot validate the signature
nor the certificate chain (and we're still missing some trust
anchors).
* Integration with CryptoAPI (on Windows) isn't possible as
long as the <code>X509Certificate(IntPtr)</code> constructor
isn't completed.
</ul>
**** Notes
<ul>
* <b>There's no validation of the certificates</b> done in this
class (this isn't a restriction of Mono!). This means that
certificate signatures and validity dates are <b>never</b>
checked!
* The newer X509Certificate class included in Microsoft's Web
Service Enhancement (WSE) is a little better (as it includes
CryptoAPI's validation) when <code>IsCurrent</code> is called.
* Microsoft implementation of <code>X509Certificate</code> is
done by using CryptoAPI. From the exceptions thrown
Authenticode(tm) support is done via COM.
</ul>
<hr>
** Assembly: System.Security
*** Namespace: <b>System.Security.Cryptography.Xml</b>
This namespace implements the <a href="http://www.w3.org/TR/xmldsig-core/">
XML Digital Signature</a> specification from
<a href="http://www.w3.org/">W3C</a>.
**** Status
<ul>
* All classes are present but some are only stubbed.
* Most classes have their unit tests.
* This assembly is present in CVS but only available when
building using NAnt (i.e. makefile are missing).
</ul>
**** TODO
<ul>
* All the transforms needs to be done. But this requires far
more XML knowledge than crypto. Note: Most tests runs because
the feeded XML is pre-c14n (by hand in the code) before
signing (not because the transforms works).
* Makefile for building under non-Windows operating systems.
</ul>
<hr>
** Assembly: Mono.Security.Win32
This assembly goal is to provide maximum compatibility with CryptoAPI
to application running with Mono's runtime on the Windows operating
system.
<b>This assembly should NEVER be used directly by any application</b>.
The classes should only be used by modifying the <code>machine.config
</code> configuration file (and then only if this increased
compatibility is required by an application).
*** Namespace: Mono.Security.Cryptography
**** Status
<ul>
* A RNGCryptoServiceProvider built on top of CryptoAPI.
* Not (yet) commited in CVS - i'm still playing with the base
classes so I can easily add other CryptoAPI-based algorithms.
</ul>
**** TODO
<ul>
* Unmanaged versions of hash algorithms (SHA1 and MD5).
* Unmanaged versions of symmetric encryption algorithms
(like DES, TripleDES, RC2 and others present in CryptoAPI).
* Unmanaged versions of asymmetric algorithms (like DSA and
RSA) which persist their keypair into the specified CSP.
</ul>
<hr>
** Assembly: Microsoft.Web.Services
Microsoft Web Service Enhancement (WSE), known as Web Service
Development Kit (WSDK) in it's beta days, is an add-on the .NET
framework that implements WS-Security (and other WS-* specifications).
It also includes improved support for XML Signature (replacing and/or
extending <code>System.Security.Cryptography.Xml</code>) and X509
certificates.
Note: WSE is distributed as an add-on because the WS-Security
specification isn't yet completed by
<a href="http://www.oasis-open.org/committees/wss/">OASIS</a>.
<b>There are some licensing issues to consider before stating to
implement WS-Security. All contributors must sign an agreement with
Microsoft before commiting anything related to WS-Security into CVS.
</b>
*** Namespace: Microsoft.Web.Services.Security
**** Status
<ul>
* Nothing (yet) commited in CVS.
</ul>
*** Namespace: Microsoft.Web.Services.Security.X509
**** Status
<ul>
* Nothing (yet) commited in CVS.
</ul>
**** TODO
<ul>
* We need to define certificate stores (for both users and
machines). These sames stores must be linked with asymmetric
keypairs. This could also be used to store the SPC roots.
</ul>
<hr>
** Other stuff
There are other, not so visible, uses of cryptography both inside and
outside the class library - such as:
<ul>
* SSL/TLS for secure communication (investigation under way).
* Assembly signing (and verification) using StrongNames.
* Assembly signing (and verification) using Authenticode(tm).
</ul>
*** Tools
There are many tools in the .NET framework that indirectly interacts
with some cryptographic classes. Mono will eventually need these tools.
**** Status
The following tools are complete:
<ul>
* <code>secutil</code> is a tool to extract certificates and
strongnames from assemblies in a format that can be easily
re-used in source code (C# or VB.NET syntax).
* <code>cert2spc</code> is a tool to transform multiple X.509
certificates (a chain) into a Software Publisher Certificate
(SPC) - which is a long name for a simple PKCS#7 file.
</ul>
**** TODO
The following tools are still missing or incomplete:
<ul>
* <code>monosn</code> is a clone of the <code>sn</code> to manage
strongnames. This tools is part of the runtime (not the class
library) and as such is written in C.
* <code>signcode</code> and <code>chktrust</code> for signing
and validating Authenticode(tm) signatures on assemblies.
* <code>makecert</code> to create X.509 test certificates that
can be used (once transformed in SPC) to sign assemblies.
* Other tools like a, GUI-based, certificate manager...
</ul>
Note that many of the tools requires the class library and/or the
runtime to be ready for them.
<hr>
** How to Help
Complete any of the TODO (and feel good about it ;-).
Add missing unit tests to classes or methods.
Write some documentation on the cryptographic classes for MonkeyGuide
(as I'm not a good writer, at least in English, but you must be a good
reader if you got to this part).
Optimization can also be done on algorithms as crypto is never fast
enough. Just be sure to test every optimization (using the unit test)
carefully - it's so fast to break an algorithm ;-).
Contact Sebastien Pouliot (<a href="mailto:[email protected]">home</a>
, <a href="mailto:[email protected]">work</a>) if you need additional
informations about the status of the cryptographic classes.
<hr>
Last reviewed: January 19, 2003 (post mono 0.18)
+190
View File
@@ -0,0 +1,190 @@
* Developer FAQ
** New classes
Q: Should we write classes which are not part of the .NET or ECMA specs?
A: Yes. The ECMA and .NET specifications are far from complete, and
to produce a complete platform we will need a number of other
classes and components.
Any new classes that are not part of .NET or ECMA should be
designed to be reusable on anyone's CLI implementation. So that
Windows developers can also use any new classes that we come up
with.
We have a few existing <a href="ideas.html">Ideas on missing
classes</a>
** Language Compatibility
Q: What is the magic that allow multiple languages to co-exist?
A: From Fergus Henderson:
<i><blockquote>
There are different levels of interoperability.
The ECMA spec defines different categories of
CLS (Common Language Specification) conformance.
There are also some useful categories that don't
correspond to any of the levels defined in the ECMA spec.
In increasing degree of difficulty, your language implementation
can
<ul>
* (a) just generate IL
* (b) be a CLS "consumer", which means that it can read in
meta-data describing component interfaces,
and that it provides a way to declare variables of
CLS-complaint types and to call CLS-complaint methods.
* (c) be a CLS "extender", which means that it can in addition
derive from CLS-compliant classes
and implement CLS-compliant interfaces
* (d) be able to produce components with *any* CLS-compliant
component interface.
</ul>
Supporting some of these may require extending your language. However,
you can get quite a lot of interoperability by just putting appropriate
functionality in your compiler, without extending your language.
For some things, e.g. ASP.NET, your language implementation also needs to be
able to
<ul>
* (e) consume CodeDom trees. CodeDom trees are an abstract
representation of programs in a form similar to a C# parse
tree, with embedded code snippets (unparsed strings).
Given a CodeDom tree, with the snippets in your language,
your language implementation needs to generate a (i) .NET
assembly and possibly also (ii) a source file in your language.
* (f) produce CodeDom trees. For some applications,
your language implementation also needs to be able to
round-trip from CodeDom -> your language -> CodeDom.
</ul>
and for some things it needs to
<ul>
* (g) generate *verifiable* IL
</ul>
So when you hear all the hype about how language XYZ is a
".NET language", make sure you ask which of these different
things are supported.
[For the record, Mercury currently supports (a). We're working on
(b) and (g), and on parts of (c) and (e). We're never going to do (f), I very
strongly doubt we'll ever do (d), and for (c) we might only ever support
implementing interfaces, not deriving from classes.]
</blockquote></i>
** PInvoke
Q: What are the two major initiatives to implement PInvoke?
A: Fergus Henderson answers:
<i><blockquote>
Many of the .NET APIs will need to be implemented using code that calls C/Unix
APIs, such as stat(). The standard way of interfacing with native code from
.NET code is to use "PInvoke". However, there is a difficulty: many of
these APIs are defined in terms of types such as C's `long' or `size_t'
or the Posix `struct stat' whose representation varies depending on the
platform (architecture/OS/C compiler). There's no *portable* way of
accessing those from .NET managed code.
So, there are a couple of different approaches.
One possibility is to access such routines by writing a wrapper, e.g. in C,
that provides the same functionality without using types with a system-dependent
representation. The wrapper can then be directly accessed from portable
.NET code. The .NET code remains both source- and binary-portable;
the wrapper code is source-portable, but needs to be compiled
seperately for each target platform. The drawback of this approach is
that you have to write a lot of cumbersome wrapper code.
Another possibility is to extend the .NET VM with support for an
additional custom attribute, e.g. "[PosixType]". The VM would then
represent types tagged with this attribute in the same way that the
underlying system represents those types. With this approach, no
wrapper code would be needed. A drawback of this approach is that it
pushes quite a bit of complexity into the VM; the VM would have to know
the native representation of all types annotated with this attribute.
Another drawback is that code using this extension might not work on
different VMs.
There have also been some other suggestions, but those are the two that
I think are the best.
</blockquote></i>
Q: What is the problem implementing PInvoke?
A: Again, from Fergus Henderson:
<i><blockquote>
There's no problem implementing PInvoke as specified in the ECMA
specs and/or MS documentation. It's just that PInvoke by itself
doesn't solve all of the problems; in particular it doesn't solve
the problem of C types whose representation is different on different
systems.
</blockquote></i>
** CVS use
Q: Why do we keep ChangeLogs and make the CVS commit messages be the
same? One could be generated from the other
A: There are a number of reasons for keeping ChangeLog files as well as
CVS commit files:
<ul>
* Offline programming: when people are traveling, CVS logs are
not available.
* Slow CVS access: Many people work over modem lines (very
typical for contributors in Europe, Asia, Latin America)
using CVS is slow and might not be available to you (cvs
server down, no anoncvs server available).
* ChangeLogs travel in a released tarball package, so it is
possible to study the rationale of changes even after a
project is long "released", or you only have the sources for
the code.
* ChangeLog are not metadata for each file, they are live
files that you can browse in the package that is being
distributed.
</ul>
Making the CVS commit message be the same as the ChangeLog has other
benefits:
<ul>
* You can track down with `cvs log' what things were changed,
and match those to meaningful reports on the intentions of
the commit.
* When reading the commits-list, you can get a glimpse of the
changes without having to diff out or cvs update your tree.
* You can read off-line the changes that are being made
(asyncrouns operation).
</ul>
This mechanism works very well for GNOME and other projects.
Q: Should I use any of the special RCS keywords like $Id: devel-faq,v 1.1 2001/07/31 21:13:05 miguel Exp $, $Author: miguel $,
$Date: 2001/07/31 21:13:05 $, or $Revision: 1.1 $?
A: Please avoid using those in the source code in the CVS. They
are not really useful, and they cause a lot of conflicts when
people have separate CVS trees.
It was a nightmare with the Linux kernel when two people had their
private CVS trees and were submitting patches to the core.
+62
View File
@@ -0,0 +1,62 @@
* Documentation
Although most of the concepts from Microsoft.NET can
be applied to the completed Mono platform, we do need to
have a complete set of free documentation written specifically
for Mono.
The documentation license we have chosen is the GNU Free
Documentation License (FDL), the standard for most documents
in the free software world.
We need documentation on a number of topics:
<ul>
* The development tools (compilers, assembler tools,
language reference, design time features).
* Frequently Asked Question compilations.
* HOWTO documents.
* The Class Libraries
* Tutorials on Mono and the specifics of running it.
* A guide to Mono as compared to the Microsoft.NET
Framework SDK
</ul>
** Class Library documentation
We are moving to a new setup for documenting the class libraries,
and you can read about it <a href="classlib-doc.html">here</a>.
A few words of warning and advice for class documentors:
A well-documented API can ease hours of frustration; as Mono
matures, robust and complete class library documentation will
become increasingly important. As you write API documentation,
whether it is embedded in source files or in external Monodoc XML,
please keep the following in mind:
Plagarism, even if it's unintentional, is a Bad Thing(TM).
Microsoft's .NET Framework Class Library documentation is an
excellent resource for understanding the behavior and properties of
a type, and a lot of hard work went in to creating this (copyrighted)
resource. Please don't copy from Microsoft's reference when
documenting a type.
To avoid this, I (<a href="mailto:[email protected]">[email protected]</a>)
suggest that you read the complete Microsoft documentation for a type,
ponder it for a while, and write the Mono documentation in your own
words. While it's certainly okay to refer to the Microsoft
documentation to clarify your understanding of behavior or properties,
please don't open the Microsoft docs and refer to them for each member
you document.
There's a lot of domain expertise among the class library contributors;
let's put the same personal stamp on the class library documentation
that we have on the class libraries themselves.
+597
View File
@@ -0,0 +1,597 @@
* Software Availability
The Virtual Execution System is available in package `mono'.
Currently this contains a metadata library and the
disassembler. Please refer to our <a
href="runtime.html">Runtime</a> description for more details
on this part of the project.
The software is also available on the `Mono' channel in <a href="http://www.ximian.com/products/redcarpet/">Red Carpet</a>.
Some useful links: <a
href="http://www.go-mono.org/mono-beginning.html">Resources/Beginning
section</a>, the <a
href="http://www.go-mono.org/faq.html">FAQ</a>.
<table>
<tbody>
<tr bgcolor="#DDDDDD">
<td>
<b>Release 0.18</b><br>
<a href="archive/mono-0.18">Release notes</a><br>
Jan 12th, 2003
</td>
<td>
<table cellspacing="1" cellpadding="3">
<tr bgcolor="#BBBBBB">
<td>
<b>Source Code</b>
</td>
<td>
<ul>
<li><a href="archive/mcs-0.18.tar.gz">Mono Class Libraries and C# Compiler.</a>
<li><a href="archive/mono-0.18.tar.gz">Mono Runtime</a>
<li><a href="archive/gc6.1.tar.gz">Boehm GC 6.1</a>
<li><a href="archive/xsp-0.2.tar.gz">XSP web server</a> <b><font color="#dd0000">New!</font></b>
</ul>
</td>
</tr>
<tr bgcolor="#BBBBBB">
<td>
<b>Source RPMs</b><br>
(No RPMS for XSP).
</td>
<td>
<ul>
<li><a href="archive/libgc-6.1-1.src.rpm">libgc-6.1-1.src.rpm</a>
<li><a href="archive/mono-0.18-1.src.rpm">mono-0.18-1.src.rpm</a>
</ul>
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td bgcolor="#999999">
<b>Red Hat 7.3/x86</b>
<ul>
<li><a href="archive/redhat-73-i386/libgc-6.1-1.i386.rpm">libgc-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-73-i386/libgc-devel-6.1-1.i386.rpm">libgc-devel-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-73-i386/mono-0.18-1.i386.rpm">mono-0.18-1.i386.rpm</a>
<li><a href="archive/redhat-73-i386/mono-devel-0.18-1.i386.rpm">mono-devel-0.18-1.i386.rpm</a>
</ul>
</td>
<td bgcolor="#999999">
<b>Red Hat 7.2/x86</b>
<ul>
<li><a href="archive/redhat-72-i386/libgc-6.1-1.i386.rpm">libgc-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-72-i386/libgc-devel-6.1-1.i386.rpm">libgc-devel-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-72-i386/mono-0.18-1.i386.rpm">mono-0.18-1.i386.rpm</a>
<li><a href="archive/redhat-72-i386/mono-devel-0.18-1.i386.rpm">mono-devel-0.18-1.i386.rpm</a>
</ul>
</td>
</tr>
<tr>
<td bgcolor="#999999">
<b>Red Hat 7.1/x86</b>
<ul>
<li><a href="archive/redhat-71-i386/libgc-6.1-1.i386.rpm">libgc-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-71-i386/libgc-devel-6.1-1.i386.rpm">libgc-devel-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-71-i386/mono-0.18-1.i386.rpm">mono-0.18-1.i386.rpm</a>
<li><a href="archive/redhat-71-i386/mono-devel-0.18-1.i386.rpm">mono-devel-0.18-1.i386.rpm</a>
</ul>
</td>
<td bgcolor="#999999">
<b>Mandrake 8.2/x86</b>
<ul>
<li><a href="archive/mandrake-82-i386/libgc-6.1-1.i586.rpm">libgc-6.1-1.i586.rpm</a>
<li><a href="archive/mandrake-82-i386/libgc-devel-6.1-1.i586.rpm">libgc-devel-6.1-1.i586.rpm</a>
<li><a href="archive/mandrake-82-i386/mono-0.18-1.i586.rpm">mono-0.18-1.i586.rpm</a>
<li><a href="archive/mandrake-82-i386/mono-devel-0.18-1.i586.rpm">mono-devel-0.18-1.i586.rpm</a>
</ul>
</td>
</tr>
<tr>
<!-- <td bgcolor="#999999"> -->
<!-- <b>SuSE 8.0/x86</b> -->
<!-- <ul> -->
<!-- <li><a href="archive/suse-80-i386/libgc-6.1-1.i386.rpm">libgc-6.1-1.i386.rpm</a> -->
<!-- <li><a href="archive/suse-80-i386/libgc-devel-6.1-1.i386.rpm">libgc-devel-6.1-1.i386.rpm</a> -->
<!-- <li><a href="archive/suse-80-i386/mono-0.17-1.i386.rpm">mono-0.17-1.i386.rpm</a> -->
<!-- <li><a href="archive/suse-80-i386/mono-devel-0.17-1.i386.rpm">mono-devel-0.17-1.i386.rpm</a> -->
<!-- </ul> -->
<!-- </td> -->
<td bgcolor="#999999">
<b>Red Hat 8.0/x86</b>
<ul>
<li><a href="archive/redhat-80-i386/libgc-6.1-1.i386.rpm">libgc-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-80-i386/libgc-devel-6.1-1.i386.rpm">libgc-devel-6.1-1.i386.rpm</a>
<li><a href="archive/redhat-80-i386/mono-0.18-1.i386.rpm">mono-0.18-1.i386.rpm</a>
<li><a href="archive/redhat-80-i386/mono-devel-0.18-1.i386.rpm">mono-devel-0.18-1.i386.rpm</a>
</ul>
</td>
</tr>
<tr>
<td bgcolor="#999999">
<!-- <b>Windows Setup Wizard (NT/2000/XP)</b>␍ -->
<!-- <ul>␍ -->
<!-- <li><a href="archive/mono-0.17-stable.exe">Mono-Setup</a>␍ -->
<!-- </ul>␍ -->
<!-- </td>␍ -->
<td bgcolor="#999999">
<b>Debian packages</b>
<ul>
<li><a href="http://www.atoker.com/mono/">Alp's web site</a>
</ul>
</td>
</tr>
</table>
</td>
</tr>
<tr>
<tr bgcolor="#CCCCC">
<td>
<b>Regression Tests</b><br>
</td>
<td>
You can get binaries for the Mono Regression Test
Suite <a href="archive/mono-tests.tar.gz">here</a>
</td>
</tr>
</tr>
</tbody>
</table>
<br>
* Older Releases:
We provide binaries for older releases until we have packages for the new release.
<table>
<tbody>
<tr bgcolor="#DDDDDD">
<td>
<b>Release 0.17</b><br>
<a href="archive/mono-0.17">Release notes</a><br>
Dec 9th, 2002.
</td>
<td>
<table cellspacing="1" cellpadding="3">
<tr bgcolor="#BBBBBB">
<td>
<b>Source Code</b>
</td>
<td>
<ul>
<li><a href="archive/mcs-0.17.tar.gz">Mono Class Libraries and C# Compiler.</a>
<li><a href="archive/mono-0.17.tar.gz">Mono Runtime</a>
<li><a href="archive/gc6.1.tar.gz">Boehm GC 6.1</a>
</ul>
</td>
</tr>
<tr bgcolor="#BBBBBB">
<td>
<b>Source RPMs</b><br>
(No RPMS for XSP).
</td>
<td>
<ul>
<li><a href="archive/libgc-6.1-1.src.rpm">libgc-6.1-1.src.rpm</a>
<li><a href="archive/mono-0.17-2.src.rpm">mono-0.17-2.src.rpm</a>
</ul>
</td>
</tr>
<tr>
<td bgcolor="#999999">
<b>Windows Setup Wizard (NT/2000/XP)</b>
<ul>
<li><a href="archive/mono-0.17-stable.exe">Mono-Setup</a>
</ul>
</td>
<td bgcolor="#999999">
<b>Debian packages</b>
<ul>
<li><a href="http://www.atoker.com/mono/">Alp's web site</a>
</ul>
</td>
</tr>
</table>
</td>
</tr>
</tr>
</tbody>
</table>
<table>
<tbody>
<tr bgcolor="#DDDDDD">
<td>
<b>Release 0.16</b><br>
<a href="archive/mono-0.16">Release notes</a><br>
Oct 1st, 2002.
</td>
<td>
<table cellspacing="1" cellpadding="3">
<tr bgcolor="#BBBBBB">
<td>
<b>Source Code</b>
</td>
<td>
<ul>
<li><a href="archive/mcs-0.16.tar.gz">Mono Class Libraries and C# Compiler.</a>
<li><a href="archive/mono-0.16.tar.gz">Mono Runtime</a>
<li><a href="archive/gc6.1.tar.gz">Boehm GC 6.1</a>
</ul>
</td>
</tr>
<tr bgcolor="#BBBBBB">
<td>
<b>Source RPMs</b>
</td>
<td>
<ul>
<li><a href="archive/libgc-6.1-1.src.rpm">libgc-6.1-1.src.rpm</a>
<li><a href="archive/mono-0.16-1.src.rpm">mono-0.16-1.src.rpm</a>
</ul>
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td bgcolor="#999999">
<b>Linux s390</b>
<ul>
<li><a href="archive/s390/glib2-2.0.6-13.s390.rpm">glib2-2.0.6-13.s390.rpm</a>
<li><a href="archive/s390/glib2-devel-2.0.6-13.s390.rpm">glib2-devel-2.0.6-13.s390.rpm</a>
p <li><a href="archive/s390/libgc-6.1alpha5-1.s390.rpm">libgc-6.1alpha5-1.s390.rpm</a>
<li><a href="archive/s390/libgc-devel-6.1alpha5-1.s390.rpm">libgc-devel-6.1alpha5-1.s390.rpm</a>
<li><a href="archive/s390/mono-0.16-1.s390.rpm">mono-0.16-1.s390.rpm</a>
<li><a href="archive/s390/mono-devel-0.16-1.s390.rpm">mono-devel-0.16-1.s390.rpm</a>
</ul>
</td>
</tr>
</table>
</td>
</tr>
<tr>
</tr>
</tr>
</tbody>
</table>
<table>
<tbody>
<tr bgcolor="#DDDDDD">
<td>
<b>Release 0.15</b><br>
<a href="archive/mono-0.15">Release notes</a><br>
Aug 23rd, 2002.
</td>
<td>
<table cellspacing="1" cellpadding="3">
<tr bgcolor="#BBBBBB">
<td>
<b>Source Code</b>
</td>
<td>
<ul>
<li><a href="archive/mcs-0.15.tar.gz">Mono Class Libraries and C# Compiler.</a>
<li><a href="archive/mono-0.15.tar.gz">Mono Runtime</a>
<li><a href="archive/gc6.1alpha5.tar.gz">Boehm GC 6.1alpha5</a>
</ul>
</td>
</tr>
<tr bgcolor="#BBBBBB">
<td>
<b>Source RPMs</b>
</td>
<td>
<ul>
<li><a href="archive/libgc-6.1alpha5-1.src.rpm">libgc-6.1alpha5-1.src.rpm</a>
<li><a href="archive/mono-0.15-1.src.rpm">mono-0.15-1.src.rpm</a>
</ul>
</td>
</tr>
<tr>
<td></td>
</tr>
<tr bgcolor="#999999">
<td>
<b>Windows (win95 friendly)</b>
<ul>
<li><a href="archive/mono-w32-Aug_28_2002.zip">Mono-w32</a>
</ul>
</td>
<td bgcolor="#999999">
<b>Red Hat null-8.0/x86</b>
<ul>
<li><a href="archive/redhat-null-i386/libgc-6.1alpha5-1.i386.rpm">libgc-6.1alpha5-1.i386.rpm</a>
<li><a href="archive/redhat-null-i386/libgc-devel-6.1alpha5-1.i386.rpm">libgc-devel-6.1alpha5-1.i386.rpm</a>
<li><a href="archive/redhat-null-i386/mono-0.15-1.i386.rpm">mono-0.15-1.i386.rpm</a>
<li><a href="archive/redhat-null-i386/mono-devel-0.15-1.i386.rpm">mono-devel-0.15-1.i386.rpm</a>
</ul>
</td>
</tr>
</table>
</td>
</tr>
</tbody>
</table>
** Binaries for other platforms.
Already daily volunteer's made binaries:
<ul>
* <a href="http://www.debianplanet.org/mono/">DebianPlanet</a>
* <a href="http://www.superin.formativ.net/mono/mono.htm">Windows</a> (works without cygwin!)
</ul>
* Snapshots
<a name="snapshots">
<a href="http://www.go-mono.com/snapshots">Nightly snapshots</a> of
the CVS repository are made every day at 10pm EST (Boston
Time). These are not guaranteed to build, they are just a
snapshot of the tree.
The <a href="anoncvs.html">anoncvs</a> mirrors provided by
Hispalinux are updated every six hours.
* Compiling the code
There are a number of ways of compiling Mono
<ul>
<li>From the <a href="#scripts">scripts</A>
<LI><a href="#install">Manually</a> for the first time.
<li>Manually, <a href="#upgrade">while upgrading</a> to CVS
</ul>
(which is an easy way to get the latest CVS information)
<a name="scripts">
* Compiling with scripts
There are scripts to help build mono for both Unix and Windows. Get
<a href="mono-build.sh">mono-build.sh</a> for Unix, or <a
href="mono-build-w32.sh">mono-build-w32.sh</a> for Windows.
These scripts automate the installation of GLIB and pkgconfig
(building from source on Unix, and using binary packages
provided by the GIMP for Windows project on Windows.) To use
the script, follow these simple steps:
<ul>
* Save the script for your platform somewhere (e.g. /usr/local/bin)
* Make the script executable (i.e chmod 755 /usr/local/bin/mono-build.sh)
* Create a directory to hold the mono source, and the compiled binaries (e.g. mkdir ~/mono)
* Change to the new directory (i.e. cd ~/mono)
* run the script (i.e. /usr/local/bin/mono-build.sh)
</ul>
The script requires wget on either platform, and building the
software requires make, gcc, automake, autoconf, and libtool.
You should install these packages from your distribution or
with the cygwin installer. You should also take care of setting
the right environment variables as the PKG_CONFIG_FLAGS, etc.
The script will download required packages from
www.go-mono.com and do a cvs checkout of mono in the current
directory. <b>IMPORTANT!:</b> The cvs server chosen defaults to
anonymous cvs;
set your CVSROOT environment variable before running the script to
select a particular cvs server.
<a name="install">
** Building the software manually
You will need to obtain the Mono dependencies first: <a
href="http://www.gtk.org">glib 2.x</a> and
<a href="http://www.freedesktop.org/software/pkgconfig">pkg-config</a>.
*** Building on Linux
<ul>
Unpack the Mono runtime distribution:
<pre>
tar xzvf mono-X.XX.tar.gz
cd mono-X.XX
</pre>
<p>
Then configure, compile and install:
<pre>
./configure --prefix=/usr/local
make
make install</pre>
This will give you a runtime, C# compiler and runtime
libraries.
If you want to recompile the runtime and the compiler,
follow these steps, first unpack the MCS package:
<pre>
tar xzvf mcs-X.XX.tar.gz
cd mcs-X.XX
</pre>
Then use the following command to compile and install:
<pre>
make -f makefile.gnu install prefix=/usr/local
</pre>
You can change /usr/local to something else if you want.
</ul>
*** On Windows, to install and work on the compiler and the class libraries:
**** Install Cygwin and the GNU build tools, Microsoft's .NET Framework SDK and the precompiled GLIB 2.0 and pkg-config libraries.
<ul>
* Install <a href="http://www.cygwin.com">Cygwin</a>.
* Install <a href="http://msdn.microsoft.com/downloads">
Microsoft .NET Framework SDK</a>.
* Change to the /usr/local directory
of your Cygwin installation.<br>
Unzip the precompiled packages listed above.
</ul>
<ul>
* If you downloaded the Mono
<a href="http://www.go-mono.com/snapshots">nightly snapshot
</a>, untar the snapshot.
* Change directories to "mcs".
* Compile:
<pre>
make
</pre>
</ul>
*** On Windows, to compile the mono runtime:
<ul>
* If you downloaded the Mono
<a href="http://www.go-mono.com/snapshots">nightly snapshot
</a>, untar the snapshot.
* Change directories to "mono".
* Configure, compile and install:
<pre>
./configure --prefix=c:/mono
make
make install
</pre>
</ul>
* Software resources and notes
The required and additional software can be downloaded here:
* Microsoft's .NET Framework SDK from
<a href="http://msdn.microsoft.com/downloads">
msdn.microsoft.com/downloads</a>.
* Cygwin and the GNU Make tools from
<a href="http://www.cygwin.com">www.cygwin.com</a>.
Some people observed problems with autoconf 2.52. Installing
autoconf 2.13 helped in those cases.
* Precompiled GLIB 2.0 and pkg-config packages (and
their dependencies) by the <a href="http://www.gimp.org/~tml/gimp/win32//index.html">GIMP for Windows</a> project from
<a href="http://www.go-mono.com/archive/pkgconfig-0.11-20020310.zip">http://www.go-mono.com/archive/pkgconfig-0.11-20020310.zip</a><br>
<a href="http://www.go-mono.com/archive/glib-2.0.4-20020703.zip">http://www.go-mono.com/archive/glib-2.0.4-20020703.zip</a> <br>
<a href="http://www.go-mono.com/archive/glib-dev-2.0.4-20020703.zip">http://www.go-mono.com/archive/glib-dev-2.0.4-20020703.zip</a> <br>
<a href="http://www.go-mono.com/archive/libiconv-1.7.zip">http://www.go-mono.com/archive/libiconv-1.7.zip</a> <br>
<a href="http://www.go-mono.com/archive/libiconv-dev-1.7.zip">http://www.go-mono.com/archive/libiconv-dev-1.7-20020101.zip</a> <br>
<a href="http://www.go-mono.com/archive/libintl-0.10.40-20020101.zip">http://www.go-mono.com/archive/libintl-0.10.40-20020101.zip</a><br>
* Download the Mono source code from the
<a href="#feb-11">packaged versions</a> or
the <a href="http://www.go-mono.com/snapshots">
nightly snapshots</a> or the <a href="anoncvs.html">
Anonymous CVS</a>. The nightly snapshots are done every
night at 10pm EST (Boston Time). The nightly snapshots are
not guaranteed to build, but most of the time they should.
</ul>
*** Notes on compiling GLIB 2.0 and pkg-config from source:
<ul>
* Some people observed problems with autoconf 2.52. Installing
autoconf 2.13 helped in those cases (don't forget to do a
`make maintainer-clean' after the update).
* Download, compile and install <a href="http://www.freedesktop.org/software/pkgconfig">pkg-config</a> from source.
(I had to change line 674 of
<nobr><tt>pkg-config-0.8.0/glib-1.2.8/gstrfuncs.c</tt></nobr> from
<nobr><tt>extern char *strsignal (int sig);</tt></nobr> to
<nobr><tt>extern const char *strsignal (int sig);</tt></nobr>.
<pre>
tar xzvf pkg-config-0.8.0.tar.gz
cd pkg-config-0.8.0
./configure --prefix=/usr
make
make install
</pre>
* Download, compile and install <a href="ftp://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.7.tar.gz">libiconv</a> from source.<br>
If you dont have MS Visual C/C++ 4.0 or 5.0 or 6.0 you can also try
the binary package available at <a
href="http://www.gimp.org/win32/libiconv-dev-20001007.zip">
http://www.gimp.org/win32/libiconv-dev-20001007.zip</a>.
* Download, compile and install the
<a href="ftp://ftp.gtk.org/pub/gtk/v2.0/glib-2.0.6.tar.gz">
glib 2.0</a> from source.
</ul>
<a name="upgrading">
** Upgrading
To upgrade your Mono installation from CVS, it is very
important that you update your Mono and MCS modules from CVS
at the same time. Failure to do so might result in a
problematic installation as the runtime and the class
libraries will be out of sync.
Run the following commands to update your CVS tree (more
details in <a href="ccvs.html">Cvs and Mono</a> and the <A
href="anoncvs.html">AnonCVS and Mono</a> pages).
<pre>
(cd mono; cvs update -dP .)
(cd mcs; cvs update -dP .)
</pre>
Once you have updated your sources, remove any cached
assemblies or old binaries from the Mono "runtime" directory,
and then compile each component:
<pre>
(cd mono/runtime; rm *exe *dll)
(cd mono; make)
(cd mcs; make)
</pre>
Now you can install the result:
<pre>
(cd mono; make install)
</pre>
Notice that following the above procedure does not require you
to manually install the software in the `mcs' directory, as
the relevant files will be copied by the `mono' makefiles.
+281
View File
@@ -0,0 +1,281 @@
* Embedding the Mono runtime, preliminary version
This document describes how to embed the Mono runtime in your
application, and how to invoke CIL methods from C, and how to
invoke C code from CIL
Slides for Paolo's presentation at .NET ONE on the embedding
API are available here: <a
href="http://primates.ximian.com/~lupus/slides/embed">Hosting the Mono
Runtime</a>. You can also get his <a
href="http://primates.ximian.com/~lupus/slides/embed/Mono-0.01.tar.gz">sample
Mono module for Perl</a>
Authors: Paolo Molaro, Miguel de Icaza.
* Embedding the runtime.
Embedding the runtime consists of various steps:
<ul>
* Compiling and linking the Mono runtime
* Initializing the Mono runtime
* Optionally expose C code to the C#/CIL universe.
</ul>
These are discussed in detail next.
** Compiling and Linking
To embed the runtime, you have to link your code against the
Mono runtime libraries. To do this, you want to pass the
flags returned by pkg-config to your compiler:
<pre>
pkg-config --cflags --libs mono
</pre>
Like this:
<pre>
gcc sample.c `pkg-config --cflags --libs mono`
</pre>
You can separate the compilation flags from the linking flags, for
instance, you can use the following macros in your makefile:
<pre>
CFLAGS=`pkg-config --cflags mono`
LDFLAGS=`pkg-config --libs mono`
</pre>
** Initializing the Mono runtime
To initialize the runtime, call mono_jit_init, like this:
<pre>
MonoDomain *domain;
domain = mono_jit_init ("domain-name");
</pre>
That will return a MonoDomain where your code will be
executed. You can create multiple domains. Each domain is
isolated from the other domains and code in one domain will
not interfere with code in other domains. This is useful if
you want to host different applications in your program.
Then you can load an assembly containing code into the domain:
<pre>
MonoAssembly *assembly;
assembly = mono_domain_assembly_open (domain, "file.dll");
if (!assembly)
error ();
</pre>
In the above example, the contents of `file.dll' will be
loaded into the domain. This only loads the code, but it will
not execute anything yet. You can replace `file.dll' with
another transport file, like `file.exe'
To start executing code, you must invoke a method in the
assembly, or if you have provided a static Main method (an
entry point), you can use the convenience function:
<pre>
retval = mono_jit_exec (domain, assembly, argc - 1, argv + 1);
</pre>
If you want to invoke a different method, look at the
`Invoking Methods in the CIL universe' section later on.
** Shutting down the runtime
To shutdown the Mono runtime, you have to clean up all the
domains that were created, use this function:
<pre>
mono_jit_cleanup (domain);
</pre>
** Applications that use threads.
The Boehm GC system needs to catch your calls to the pthreads
layer, so in each file where you use pthread.h you should
include the <gc/gc.h> file.
* Exposing C code to the CIL universe
The Mono runtime provides two mechanisms to expose C code to
the CIL universe: internal calls and native C code. Internal
calls are tightly integrated with the runtime, and have the
least overhead, as they use the same data types that the
runtime uses.
The other option is to use the Platform Invoke (P/Invoke) to
call C code from the CIL universe, using the standard P/Invoke
mechanisms.
To register an internal call, use this call in the C code:
<pre>
mono_add_internal_call ("Hello::Sample", sample);
</pre>
Now, you need to declare this on the C# side:
<pre>
using System;
using System.Runtime.CompilerServices;
</pre>
<pre>
class Hello {
[MethodImplAttribute(MethodImplOptions.InternalCall)]
extern static string Sample ();
}
</pre>
Since this routine returns a string, here is the C definition:
<pre>
static MonoString*
Sample ()
{
return mono_string_new (mono_domain_get (), "Hello!");
}
</pre>
Notice that we have to return a `MonoString', and we use the
`mono_string_new' API call to obtain this from a string.
* Invoking Methods in the CIL universe
Calling a method in the CIL universe from C requires a number of steps:
<ul>
* Obtaining the MonoMethod handle to the method.
* The method invocation.
</ul>
** Obtaining a MonoMethod
To get a MonoMethod there are several ways.
You can get a MonoClass (the structure representing a type)
using:
<pre>
MonoClass *
mono_class_from_name (MonoImage *image, const char* name_space, const char *name);
</pre>
and then loop in the returned class method array until you get
the one you're looking for. There are examples of such
searches as static functions in several C files in
metadata/*.c: we need to expose one through the API and remove
the duplicates.
The other, simpler, way is to use the functions in
debug-helpers.h: there are examples of their use in monograph,
mint and the jit as well. You basically use a string
description of the method, like:
<pre>
"System.Object:GetHashCode()"
</pre>
and create a MonoMethodDesc out of it with:
<pre>
MonoMethodDesc* mono_method_desc_new (const char *name, gboolean include_namespace);
</pre>
You can then use:
<pre>
MonoMethod* mono_method_desc_search_in_class (MonoMethodDesc *desc, MonoClass *klass);
MonoMethod* mono_method_desc_search_in_image (MonoMethodDesc *desc, MonoImage *image);
</pre>
to search for the method in a class or in an image. You would
tipically do this just once at the start of the program and
store the result for reuse somewhere.
** Invoking a Method
There are two functions to call a managed method:
<pre>
MonoObject*
mono_runtime_invoke (MonoMethod *method, void *obj, void **params,
MonoObject **exc);
and
MonoObject*
mono_runtime_invoke_array (MonoMethod *method, void *obj, MonoArray *params,
MonoObject **exc);
</pre>
obj is the 'this' pointer, it should be NULL for static
methods, a MonoObject* for object instances and a pointer to
the value type for value types.
The params array contains the arguments to the method with the
same convention: MonoObject* pointers for object instances and
pointers to the value type otherwise. The _invoke_array
variant takes a C# object[] as the params argument (MonoArray
*params): in this case the value types are boxed inside the
respective reference representation.
From unmanaged code you'll usually use the
mono_runtime_invoke() variant.
Note that this function doesn't handle virtual methods for
you, it will exec the exact method you pass: we still need to
expose a function to lookup the derived class implementation
of a virtual method (there are examples of this in the code,
though).
You can pass NULL as the exc argument if you don't want to
catch exceptions, otherwise, *exc will be set to the exception
thrown, if any. if an exception is thrown, you can't use the
MonoObject* result from the function.
If the method returns a value type, it is boxed in an object
reference.
We have plans for providing an additional method that returns
an unmanaged->managed thunk like this:
<pre>
void* mono_method_get_unmanaged_thunk (MonoMethod *method);
</pre>
You'll be able to store the returned pointer in a function
pointer with the proper signature and call that directly from
C:
<pre>
typedef gint32 (*GetHashCode) (MonoObject *obj);
GetHashCode func = mono_method_get_unmanaged_thunk (System_Object_GetHashCode_method);
gint32 hashvalue = func (myobject);
</pre>
It may not be possible to manage exceptions in that case,
though. I need to think more about it.
* Samples
See the sample programs in mono/sample/embed for examples of
embedding the Mono runtime in your application.
+1231
View File
File diff suppressed because it is too large. Load diff
Executable
+175
View File
@@ -0,0 +1,175 @@
* Firebird and Interbase Data Provider
<ul>
<li>Does not exist in Mono, but is a separate project</li>
<li><a href="http://firebird.sourceforge.net/index.php">Firebird Relational Database</a> is
an independent project which uses source code based on the Interbase source code released
by Borland under the Interbase Public License</li>
<li>Both the Firebird Relational Database and the Firebird .NET Data Provider can be
downloaded from <a href="http://sourceforge.net/projects/firebird/">here</a></li>
<li>The Firebird .NET Data provider has been made
available by Carlos Guzmán Álvarez (aka "Carlos G.A."), who has also made a
number of contributions to the OdbcJdbc code</li>
</ul>
** Current Status
<ul>
<li>Currently, it is able to connect to Firebird and Interbase databases
and execute commands</li>
<li>The new data
provider/driver is written in C# and provides a high-performance native
implementation of the GDS32/API functions. This means that .Net developers
will be able to access Firebird databases without the need of Firebird
client install</li>
<li>In support of the new module, a new mailing list
<a href="http://lists.sourceforge.net/lists/listinfo/firebird-net-provider">firebird-net-provider</a> has
been created. Please use this list for any
questions that you may have about the provider</li>
<li>Stuff that works:
<ul>
<li>Currently implemented classes:
<ul>
<li>Connection and Connection Pooling</li>
<li>Command</li>
<li>Transaction</li>
<li>CommandBuilder</li>
<li>DataAdapter</li>
<li>DataReader</li>
<li>Error</li>
<li>ErrorCollection</li>
<li>Exception</li>
<li>Parameter</li>
<li>ParameterCollection</li>
<li>Transaction</li>
</ul>
</li>
</ul>
</li>
</ul>
** Action Plan
<ul>
<li>Bug fixing</li>
<li>Improving API reference documentation</li>
<li>Full testing with Firebird 1.5</li>
<li>Test with Mono ( http://www.go-mono.com )
<ul>
<li>Status : Started</li>
</ul>
</li>
<li>Support for array datatype
<ul>
<li>Status : Started</li>
<li>Comments: See Interbase API reference documentation</li>
<li>Add new file FbArray.cs for array fields management</li>
</ul>
</li>
<li>Support for Stored Procs calls that have returns values
<ul>
<li>Status : Pending.</li>
<li>Comments: Modify the isc_dsql_prepare method of GDS implementation for
allow to return the output parameters.</li>
</ul>
</li>
<li>Implementation of FbClientPermission and FbClientPermissionAttribute
<ul>
<li>Status : Pending</li>
<li>Comments: See if these are really needed for Firebird</li>
</ul>
</li>
<li>Improve Logger implementation
<ul>
<li>Status: Pending</li>
</ul>
</li>
</ul>
** Testing
<ul>
<li>Need a working mono and mcs</li>
<li>Need access to a Firebird Relational Database or you can download
it from <a href="http://firebird.sourceforge.net">here</a></li>
<li>Get the Firebird .NET data provider from here as
<a href="http://lists.sourceforge.net/lists/listinfo/firebird-net-provider">firebird-net-provider</a>. Make
sure the Firebird .NET data provider binary assembly FirebirdSql.Data.Firebird.dll is
installed in the same place as the mono class libraries.</li>
<li>C# Example for Mono's System.Data.OleDb:
<pre>
using System;
using System.Data;
using FirebirdSql.Data.Firebird;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Database=C:\\PROGRAM FILES\\FIREBIRD\\EXAMPLES\\EMPLOYEE.GDB;" +
"User=SYSDBA;" +
"Password=masterkey;" +
"Dialect=3;" +
"Server=localhost";
IDbConnection dbcon = new FbConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
string sql = "SELECT * FROM employee";
dbcmd.ConnectionString = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
object dataValue = myReader.GetValue(0);
string sValue = dataValue.ToString();
Console.WriteLine("Value: " + sValue);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r FirebirdSql.Data.Firebird.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r FirebirdSql.Data.Firebird.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+9
View File
@@ -0,0 +1,9 @@
* The GCC front-end
The GCC front-end will accept input in a binary file with
codes in the Common Intermediate Language (CIL), and generate
native code.
This will allow pre-compilation and full optimization to take
place before a program is executed.
+147
View File
@@ -0,0 +1,147 @@
* Gtk#
<a href="http://gtk-sharp.sourceforge.net">Gtk#</a> (Gtk
sharp) is a set of C# language bindings for the
<a href="http://www.gtk.org">Gtk+</a> toolkit and other
libraries that are part of the
<a href="http://www.gnome.org">GNOME</a> platform .
** API of Gtk#
The API is browsable
<a href="http://primates.ximian.com/~tvgm/gtk-sharp-docs/">here</a>
** Where to learn more.
Visit the official site for the <a href="http://gtk-sharp.sourceforge.net">Gtk# Project</a>.
The <a href="http://www.go-mono.org/faq">Mono FAQ</a> has some useful
information too.
** GTK# On Linux
<p>Where to get distributions of GTK# for Linux: TODO
<p>Buidling on Linux:
<ul>
<li>Get GTK# source from <a href="http://gtk-sharp.sourceforge.net">Gtk# Project</a>.</li>
<li>run ./autogen.sh --prefix=my_mono_installation_prefix</li>
<li>make</li>
<li>make install</li>
</ul>
** GTK# On Windows
<p>There is a Windows Installer for GTK# <a href="http://www.sport-huettn.de/mono/gtk-sharp-0.6-stable-2.exe">here</a>.
<p>If you want to build GTK# yourself on Windows:
<p>To build gtk# under windows, you will need the following:
<ul>
<li>cygwin from <a href="http://www.cygwin.com/">here</a> When installing Cygwin via setup.exe,
by default binutils and other tools do not get installed; you have to make
sure to select these items. Just make
sure Base and Development are set to Install.</li>
<li>Mono 0.17 or later from <a href="http://www.go-mono.com/download.html">here</a>
You can use Windows Setup Wizard (NT/2000/XP).</li>
<li>GTK+ 2.0 (and dependencies). You can obtain gtk+ 2.0 by either of the
following:
<ul>
<li>You can get a Windows Installer at:
<a href="http://www.dropline.net/jade/download.html">here</a> </li>
<li>or get the separate binary and dev/lib packages at
at <a href="http://www.gimp.org/~tml/gimp/win32/downloads.html">here</a> </li>
<li>or binary package from Dev-C++ site <a href="http://www.bloodshed.net/dev/packages/gtk.html">here</a> </li>
<li>or get Gtk4Win <a href="http://wingtk.sourceforge.net/index.html">here</a> </li>
<li>or the source at <a href="http://www.gtk.org/">here</a> </li>
</ul>
</li>
<li>binary distriubtion of a current web browser
like Internet Explorer 4.0, Mozilla 1.0, or Netscape 7.0 which
includes things like msvcrt.dll.</li>
<li>Microsoft .NET Framework at
<a href="http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/000/976/msdncompositedoc.xml&frame=true">here</a> </li>
<p>If you are running Windows 95/98/ME, then you will need Unicode support.
Look in
mono-list archives for information about how to get
Mono to work on Windows 9x.
<a href="http://lists.ximian.com/archives/public/mono-list/2002-December/004158.html">here</a>
<p>Environment Variables to set:
<ul>
<li>PATH - set to your mono installation bin and lib path.
For example, my mono installation prefix is:
<pre>
F:/cygwin/home/DanielMorgan/mono/install
</pre>
<p>So, I would set my PATH in the Windows Control Panel as:
<pre>
F:/cygwin/home/DanielMorgan/mono/install/bin;F:/cygwin/home/DanielMorgan/mono/install/lib</li>
</pre>
</li>
<li>LD_LIBRARY_PATH - set to your mono installation lib path</li>
<li>PKG_CONFIG_PATH - set to your mono installation lib/pkgconfig path, such
as,
<pre>
F:/cygwin/home/DanielMorgan/mono/install/lib/pkgconfig</li>
</pre>
<p>If you got the gtk-sharp source, cd to the gtk-sharp directory, type:
<pre>
./autogen.sh --prefix=~/mono/install
</pre>
<p>Set your --prefix= to whatever your mono installation prefix is located.
This will take awhile to go through the ./autogen.sh and ./configure...
<p>After that it finishes succesfully, you run make with the makefile.win32
like:
<pre>
make -f makefile.win32
</pre>
<p>After that finishes succesfully, you can copy to your mono installation lib
path like:
<pre>
cp */*.dll ~/mono/install/lib
</pre>
</ul>
<p>The pkg-config files for
gtk+ 2.0 and dependencies will need to be set correctly if they haven't
already been.
<p>Look in your mono installation/lib/pkgconfig, such as,
<pre>
F:/cygwin/home/DanielMorgan/mono/install/lib/pkgconfig
</pre>
<p>You will find files like: gtk+-2.0.pc
<p>Edit the line that says
<pre>
prefix=something
</pre>
<p>And set it to your mono installation prefix, such as,
<pre>
prefix=F:/cygwin/home/DanielMorgan/mono/install
</pre>
<p>Do this for all the .pc files in that directory. If there are not any, then
you will need to create them. Or get them from somewhere like the dev
packages at
<a href="http://www.gimp.org/~tml/gimp/win32/downloads.html">here</a>
** GTK# On Solaris
TODO
** GTK# On AIX
TODO
+31
View File
@@ -0,0 +1,31 @@
* Mono Hackers Hall Of Fame
Without the help, the skills and the time of many passionate developers outside of
the Ximian Mono team, Mono would not be where it is today.
Many of them do it for fun, some do it because they really want a nice CLR they
can hack on, some do it because they need a working solution to some development
issues and mono is the ideal tool for the job.
Some of them may start contributing because they want a mention in the
<b>Mono Hackers Hall Of Fame</b>! Whatever the cause, join us in a big<br>
<h1 align="center">Thank you!</h1>
* Mono Hackers
** Sergey Chaban
Sergey has been a long time contributor to the project, from the early
work on the class libraries that were critical to Mono's origin: every
time you use a Hashtable in Mono, it runs Sergey's code, to the
low-level optimizations on the JIT engine and to his work on ILASM and
the PEToolkit. And countless other things.
** Nick Drochak
The first, deserved, entry in the <b>Mono Hackers Hall Of Fame</b> is for
Nick Drochak, who joined us in the first days of Mono and built the testing
infrastructure for the C# assemblies, fixed tons of bugs and even adventured
himself in the lands of the C runtime. His work is invaluable for keeping
Mono on the right track through the daily changes in the codebase.
Executable
+132
View File
@@ -0,0 +1,132 @@
* IBM DB2 Data Provider
<ul>
<li>Exists in namespace DB2ClientCS and assembly Mono.Data.DB2Client</li>
<li>The source code exists at mcs/class/Mono.Data.DB2Client</li>
<li>Requires the Call Level Interface to IBM DB2 shared library. This
is db2cli.dll on Windows. The IBM DB2 CLI API is very similar to the ODBC API. If
you take a look at Mono's System.Data.Odbc ODBC provider, you will see the
DllImport's have similiar function names.</li>
<li><a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a> can be downloaded from IBM.</li>
<li>IBM DB2 Provider created by Christopher Bockner.</li>
</ul>
** Current Status
<ul>
<li>Compiles on Windows and Linux. Works on Windows. Still needs to be tested on Linux.</li>
<li>Able to connect to IBM DB2</li>
<li>Able to execute DML, such as, CREATE TABLE via ExecuteNonQuery()</li>
</ul>
** Action Plan
<ul>
<li>Still needs work to get it to retrieve data via ExecuteReader() and
use the data reader to read data.</li>
</ul>
** Testing
In order to test.
<ul>
<li>Have working mono and mcs setup</li>
<li>Have access to an IBM DB2 database. If you do not have access, download the
<a href="http://www-3.ibm.com/software/data/db2/">IBM DB2</a> software. There
are versions for Windows, Linux, AIX, and Sun Solaris.</li>
<li>Make sure the assembly Mono.Data.DB2Client.dll was built and installed
where the other class libraries are installed.</li>
<li>If you do not have the source to mcs, get the source from
<a href="http://www.go-mono.com/download">here</a></li>
<li>In mcs/class/Mono.Data.DB2Client/Test/DBConnTest, you will find
a DBConnTest.cs.</li>
<li>To build DBConnTest:
<ul>
<li>On Unix:</li>
<pre>
mcs DBConnTest.cs -r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
<li>On Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe DBConnTest.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
<li>To run it on mono:
<pre>
mono DBConnTest.exe database userid password
</pre>
</li>
</ul>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.DB2Client;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"DSN=sample;UID=db2admin;PWD=mypass";
IDbConnection dbcon = new DB2ClientConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"CREATE TABLE mono_db2_test1 ( " +
" testid varchar(2), " +
" testdesc varchar(16) " +
")";
dbcmd.ConnectionString = sql;
dbcmd.ExecuteNonQuery();
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r Mono.Data.DB2Client.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r Mono.Data.DB2Client.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
+112
View File
@@ -0,0 +1,112 @@
* Ideas
There are many pending classes that need to be implemented. Those have
the highest impact in the Mono project: the sooner they are done,
the sooner we can start using this platform to create new and
exciting applications.
That being said, if you are not very excited about working on class
libraries, here is a list of other related projects or tools that might
be useful to the Mono project.
Here are a few ideas of tools, classes and projects that you
could start. More are forthcoming.
<a name="runtime">
** Runtime
We need a verifier that can be run on an executable (assembly)
and tells whether the metadata for the executable is correct
or not. It should report any anomalies.
For a list of anomalies in assemblies, check the various assertions
that are described on the ECMA documentation.
This will help test our generated executables and can be also
used as an external verifier.
<a name="classes">
** Classes
<ul>
TODO=jxta,The JXTA Peer to Peer foundation
* Implement a JXTA protocol implementation:
<a href="http://www.jxta.org">http://www.jxta.org</a>
TODO=camel,Mail API
* Implement a Mail API, similar to Camel or JavaMail (Camel has
significant architecture features that are required on a real
mailer).
You can check the current C
<a href="http://cvs.gnome.org/bonsai/rview.cgi?dir=evolution%2Fcamel">
Camel implementation</a>.
Such an implementation could be used both with
Microsoft .NET and Mono.
TODO=multimedia
* Interfacing to Multimedia systems. You might want
to look into the Quicktime API. I know <a
href="mailto:[email protected]">Vladimir</a> has
researched the problem before
</ul>
<a name="projects">
** Projects
<ul>
TODO=xmlStorage,
* Implement an xmlStorageSystem for the CLI:
<a href="http://www.soapware.org/xmlStorageSystem">
http://www.soapware.org/xmlStorageSystem</a>
TODO=guavac,Java compiler for .NET
* You could take one of the existing Java compilers
(Guavac comes to mind as it is so nice) and modify
it to generate .NET code rather than JVM byte
codes.
This should be a pretty straightforward task.
Guavac has the advantage of being written in C++ and
it could be compiled with the Microsoft Managed C++
compiler and produce a .NET executable with it.
TODO=CORBA,CORBA implementation
* Build a CORBA interoperability engine for the CLR.
You do not need to do all of the work, just talking
the protocol will get us a long way (<a
href="http://www.omg.org">The OMG site</a> has the
CORBA specs).
Get in touch with David Taylor (dtaylo11 at bigpond
dot net dot au) as he has been working on this
project.
TODO=Bonobo,Bonobo for Mono
* Once CORBA is done, implement the Bonobo interfaces
to allow people to use Bonobo components in Mono and
Mono components with Bonobo. The best of both worlds!
TODO=moniker,Object Naming System with Monikers
* A naming space for Mono. An object naming space is
a very powerful tool. Bonobo implements a moniker
system that is more powerful than the original
moniker concept that was pioneered by COM/OLE in the
Microsoft world.
Our implementation builds on a concept, and we have
made it simpler, more powerful, more extensible and
a much better mechanism than the equivalent monikers
on Windows.
Implementing Mono monikers would benefit both
Windows users using .NET and Mono users on Unix and
Windows.
Here is <a
href="http://primates.ximian.com/~miguel/monikers.html">an
overview of the moniker system</a> in Bonobo.
</ul>
+2152
View File
File diff suppressed because it is too large. Load diff
Executable
+66
View File
@@ -0,0 +1,66 @@
* Java
<b>This is an outline on how to support Java, actual
implementations of ideas like this can be found <a href="http://radio.weblogs.com/0109845/">here</a></b>
It would be interesting to support the Java language as part
of the Mono project.
You have to think of Java as various pieces: Java the
language and Java the virtual machine.
It is possible to compile Java to .NET, as shown by the
Microsoft J# compiler. We could then allow the migration of
Java applications to the Mono runtime.
** Native compiler
Although a native compiler can be built, and probably should be
built using an existing compiler, a short term solution is to
build a translator from Java class files to the ECMA CIL images.
This has the advantage that we can use an existing and tested
Java compiler to generate the code, and then we can use an automated
code compiler that compiles Java VM bytecodes to CIL bytecodes.
** The translator.
It would be interesting to write a semantic translator that
converts java byte codes into CIL opcodes. This is possible
because the Java byte codes are a subset of the CIL ones.
A semantic tree needs to be constructed (very much in the
spirit of what is done in mono_analize_stack in
<tt>mono/mono/jit/jit.c</tt>. Once such a semantic tree is
constructed, we could generate the equivalent Java code.
This has a number of interesting side effects: people can
continue to use their existing Java compilers to compile their
code, and a simple tool that converts their .class files into
a .NET assembly can be used.
** Libraries
We could translate the GNU Classpath libraries with the above
tools to provide the Java runtime required to host into the
Mono runtime. Some special treatment would be required for
core data types like integers, arrays and strings, and of
course reuse where possible existing classes from .NET to make
them compatible.
** JILC - Java to IL Compiler
This is an attempt to make the java bytecode available for the
.NET environment.
The project attempts to generate the IL code / bytecode from the
compiled java class files. It has reached the stage of code-generation.
The issues that needs to be addressed is the mapping of java objects
to the IL objects, eg: java.lang.String to System.String.
Gaurav Vaish and Abhaya Agarwal are currently leading this project.
The project is currently hosted at <a href="http://sourceforge.net/projects/jilc">SourceForge.Net</a>.
The official home page of the project is
<a href="http://jilc.sourceforge.net">http://jilc.sourceforge.net</a>.
+23
View File
@@ -0,0 +1,23 @@
* Debugging information
Compile your programs using the `-g' flag in MCS, that will generate a file
with the extension .dbg containing the dwarf symbols for your executable.
To get stack traces with line number information, you need to run your
program like this:
<b>
mono --debug program.exe
</b>
Notice that the program will need to be compiled with the -g
flag and that running with --debug will slow down the execution.
* Mono Debugger
A new debugger has been created in C# and using Gtk# for its
user interface, this will simplify the debugging of CLI applications.
Stay turned for its first public release.
+86
View File
@@ -0,0 +1,86 @@
* A debugging session using a dynamically generated symbol file.
Let's assume we have the following C# application which we want to debug:
<pre>
using System;
public class Foo
{
public struct MyStruct {
int a;
long b;
double c;
}
public static void Main ()
{
Int32 value = 5;
long test = 512;
MyStruct my_struct;
my_struct.a = 5;
my_struct.b = test;
my_struct.c = 23323.5235;
}
}
</pre>
First of all, we need to compile it and create the .il files:
<pre>
$ mcs ./Foo.cs
$ monodis /home/export/martin/MONO-LINUX/lib/corlib.dll > corlib.il
$ monodis Foo.exe > Foo.il
</pre>
Now we can start the JIT in the debugger:
<pre>
$ gdb ~/monocvs/mono/mono/jit/mono
(gdb) r --debug=dwarf --break Foo:Main ./Foo.exe
Starting program: /home/martin/monocvs/mono/mono/jit/mono --debug=dwarf --break Foo:Main ./Foo.exe
0x081e8911 in ?? ()
(gdb) call mono_debug_make_symbols ()
(gdb) add-symbol-file /tmp/Foo.o
Reading symbols from /tmp/Foo.o...done.
Current language: auto; currently c++
(gdb) frame
#0 Foo.Main () at Foo.il:26
26 // method line 2
(gdb) n
Foo.Main () at Foo.il:38
38 IL_0000: ldc.i4.5
(gdb) list
33 .maxstack 2
34 .locals (
35 int32 V_0,
36 int64 V_1,
37 valuetype MyStruct V_2)
38 IL_0000: ldc.i4.5
39 IL_0001: stloc.0
40 IL_0002: ldc.i4 512
41 IL_0007: conv.i8
42 IL_0008: stloc.1
43 IL_0009: ldloca.s 2
44 IL_000b: ldc.i4.5
45 IL_000c: stfld int32 .MyStruct::a
46 IL_0011: ldloca.s 2
47 IL_0013: ldloc.1
48 IL_0014: stfld int64 .MyStruct::b
49 IL_0019: ldloca.s 2
50 IL_001b: ldc.r8 23323.5
51 IL_0024: stfld float64 .MyStruct::c
52 IL_0029: ret
(gdb) until 52
Foo.Main () at Foo.il:53
53 }
(gdb) info locals
V_0 = 5
V_1 = 512
V_2 = {a = 5, b = 512, c = 23323.523499999999}
</pre>
As you see in this example, you need to know IL code to use this debugging method - but
it may be the only way to debug a library.
+70
View File
@@ -0,0 +1,70 @@
* A debugging session using a symbol file which has been created by MCS.
Let's assume we have the following C# application which we want to debug:
<pre>
using System;
public class Foo
{
public struct MyStruct {
int a;
long b;
double c;
}
public static void Main ()
{
Int32 value = 5;
long test = 512;
MyStruct my_struct;
my_struct.a = 5;
my_struct.b = test;
my_struct.c = 23323.5235;
}
}
</pre>
First of all, we need to compile it with MCS, assemble the generated .s file and
create the .il files for all referenced assemblies which were not compiled with MCS:
<pre>
$ mcs -g ./Foo.cs
$ as -o Foo-debug.o Foo-debug.s
$ monodis /home/export/martin/MONO-LINUX/lib/corlib.dll > corlib.il
</pre>
Now we can start the JIT in the debugger:
<pre>
$ gdb ~/monocvs/mono/mono/jit/mono
(gdb) r --debug=dwarf-plus --break Foo:Main ./Foo.exe
Starting program: /home/martin/monocvs/mono/mono/jit/mono --debug=dwarf-plus --break Foo:Main ./Foo.exe
Program received signal SIGTRAP, Trace/breakpoint trap.
0x081e8681 in ?? ()
(gdb) call mono_debug_make_symbols ()
(gdb) add-symbol-file Foo-debug.o
(gdb) add-symbol-file /tmp/corlib.o
` (gdb) frame
#0 Main () at ./Foo.cs:11
11 public static void Main ()
(gdb) n
Main () at ./Foo.cs:13
13 Int32 value = 5;
(gdb)
14 long test = 512;
(gdb)
17 my_struct.a = 5;
(gdb)
18 my_struct.b = test;
(gdb)
19 my_struct.c = 23323.5235;
(gdb)
20 }
(gdb) info locals
value = 5
test = 512
my_struct = { a = 5, b = 512, c = 23323.5235 }
</pre>
Executable
+142
View File
@@ -0,0 +1,142 @@
* Compilers for other languages
Here are some other free compilers for other languages that
target .NET and should work with Mono with no problem:
<ul>
* <a href="#ComponentPascal">Component Pascal</a>
* <a href="#MonoLogo">MonoLogo</a>
* <a href="#Oberon">Oberon</a>
* <a href="#Forth">Forth</a>
* <a href="#mbas">Mono Basic</a> (Mono's VB.NET compiler)
</ul>
Languages which are known to run, but we have not done a
complete ran of all their regression tests to validate it:
<ul>
* Kylix.NET.
</ul>
Languages we would like to have supported, with links to resources:
<ul>
* <a href="#JavaScript">Java Script</a>
* <a href="#java.html">Java</a>
* <a href="#c">C</a>
</ul>
Some experimental languages:
<ul>
* <a href="#Tachy">Tachy</a> (scheme-like)
</ul>
<a name="Java">
** Java
There is a very interesting project to make a JavaVM for .NET
<a href="http://radio.weblogs.com/0109845/">here</a>.
Currently this will not work with Mono, as they use some
pieces of Managed C++ to implement the JNI interface.
A workaround has been discussed, contact the author if you want to contribute.
<a name="MonoLogo">
** MonoLogo
An implementation of Logo for Mono (and .NET)
The <A href="http://monologo.sf.net">Mono Logo</a> compiler is
hosted in the <a href="ccvs.html">Mono CVS</a> repository
and also available on the <a href="anoncvs.html">AnonCVS</a> mirrors.
<a name="mbas">
** Mono Basic (Mono's VB.NET compiler)
Work has resumed on the Mono Visual Basic compiler (currently
called mbas). It is part of the standard Mono distribution,
but its still an early compiler.
<a name="Oberon">
** Oberon
This Oberon compiler is written in Oberon.NET (another self
hosting compiler).
The main site <a href="http://www.oberon.ethz.ch/oberon.net/">http://www.oberon.ethz.ch/oberon.net/</a>
Download:
<a href="http://www.oberon.ethz.ch/oberon.net/download/">http://www.oberon.ethz.ch/oberon.net/download/</a>
Examples:
<a href="http://www.oberon.ethz.ch/oberon.net/examples/">http://www.oberon.ethz.ch/oberon.net/examples/</a>
<a href="http://www.superin.formativ.net/mono/oberon/oberon.zip">http://www.superin.formativ.net/mono/oberon/oberon.zip</a>
<a name="ComponentPascal">
** Component Pascal
The Component Pascal compiler: <a
href="http://www2.fit.qut.edu.au/CompSci/PLAS/ComponentPascal">Home
Page</a>, you can <a
href="http://www2.fit.qut.edu.au/CompSci/PLAS/ComponentPascal/gpcp1.1.4-netRTM.zip">
download it</a>
<a name="Forth">
** Delta Forth
The Delta Forth.NET project: <a
href="www.dataman.ro/dforth">Home
Page</a> and <a href="http://www.dataman.ro/dforth/index.html">more
details here</a>.
<a name="Tachy">
** Tachy
A subset of Scheme language called <a
href="http://radio.weblogs.com/0101156/stories/2002/03/19/tachy.html">Tachy</a>
* Missing languages
Here is a list of a few languages that we would like to see
supported. We will try to maintain a set of links here with
technical information for those interested in porting,
implementing or adapting a compiler for any of these
languages:
<a name="JavaScript">
* Java Script
The Mozilla project has an implementation of JavaScript
written in Java called <a
href="http://www.mozilla.org/rhino/">Rhino</a>.
You could port this code from Java to C#.
Note that since JavaScript allows for evaluation at runtime,
the compiler has to be built as a class that can be invoked at
runtime.
<a name="c">
* C
Ideally GCC could be modified to generate CIL, but it is a
big task. That would give us various compilers in one pass.
<a href="http://www.cs.princeton.edu/software/lcc">LCC</a> 4.2
has been recently released. This release adds support for compiling
ANSI C programs to CIL. Note that the CIL support only works on Win32
right now, but should be easy to convert to Mono/other architectures.
LCC is not an open source compiler, but it is free as long as you
do not profit from selling it.
<a name="Java">
* Java
We have a <a href="java.html">separate page</a> for Java.
+211
View File
@@ -0,0 +1,211 @@
* Mailing Lists
Most of the mailing lists are in english, but there is also
Mono Hispano that has lists in Spanish. <a
href="http://mono.es.gnome.org/mailman/listinfo/mono-hispano">Mono Hispano list</a>
There are a number of mailing lists for Mono in English:
<table>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-list">mono-list</a></b>
</td>
<td>
The general Mono discussion list.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-announce-list">mono-announce-list</a></b>
</td>
<td>
Announcements of Mono developments.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-gc-list">mono-gc-list</a></b>
</td>
<td>
Discussion on the GC system of Mono.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-patches">mono-patches</a></b>
</td>
<td>
Track the CVS activity of Mono on this mailing list (patches are sent to recipients).
You can get <a href="http://www.go-mono.com/snapshots">daily snapshots</a> as well.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-cvs-list">mono-cvs-list</a></b>
</td>
<td>
Track the CVS activity of Mono on this mailing list.
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-docs-list">mono-docs-list</a></b>
</td>
<td>
Discussion on the documentation of Mono.
</td>
</tr>
<tr>
<td>
<b><a href="http://lists.ximian.com/mailman/listinfo/mono-bugs">mono-bugs</a></b>
</td>
<td>
This mailing list is used to keep track of the bugs in Mono as reported
in <a href="http://bugzilla.ximian.com">Bugzilla.ximian.com</a>
</td>
</tr>
<tr>
<td>
<b><a
href="http://lists.ximian.com/mailman/listinfo/mono-winforms-list">mono-winforms-list</a></b>
</td>
<td>
Used to discuss the Windows.Forms implementatation for Mono using Wine.
</td>
</tr>
</table>
Other mailing lists of interest:
<ul>
* <b><a
href="http://discuss.develop.com/dotnet.html">Dotnet mailing
list at Develop.com:</a></b> The guys at Develop Mentor run
this general purpose mailing list.
</ul>
</ul>
* Google search of the archives
<!-- Google Search with mods -->
<center>
<table>
<tr>
<td><a href="http://www.google.com/search"><img src="mailing-lists_files/Logo_40wht.gif" border="0" alt="Google" align="middle"></a></td>
<td>
<table>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face="arial,sans-serif" size="-1"><input type="hidden" name="domains" value="www.go-mono.com;lists.ximian.com"><br><input type="radio" name="sitesearch" value="www.go-mono.com"> Search www.go-mono.com <input type="radio" name="sitesearch" value="lists.ximian.com"> Search lists.ximian.com </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-announce-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>announce-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-bugs">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>bugs</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-gc-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>gc-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-cvs-list">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>cvs-list</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
<tr><td>
<FORM method=GET action=http://www.google.com/custom>
<TABLE bgcolor=#FFFFFF cellspacing=0 border=0>
<tr valign=top>
<td>
<INPUT TYPE=text name=q size=31 maxlength=255 value="">
<INPUT TYPE=hidden name=q size=31 maxlength=255 value="mono-patches">
<INPUT type=submit name=sa VALUE="Search">
<input type="hidden" name="cof" value="GIMP:#00ff00;T:#ffffff;LW:401;BIMG:http://www.go-mono.com/images/bgsquares.gif;ALC:#ffffff;L:http://www.go-mono.com/images/mono.gif;GFNT:#cc7700;LC:#ee9900;LH:80;BGC:#444444;AH:center;VLC:#cccccc;S:http://www.go-mono.com;GALT:#eeee00;AWFID:45753ce73241ef7a;">
<font face=arial,sans-serif size=-1><input type=hidden name=domains value="lists.ximian.com"><br> <input type=hidden name=sitesearch value="lists.ximian.com"> Search mono-<b>patches</b> </font><br>
</td></tr></TABLE>
</FORM>
</tr></td>
</table>
</tr>
</table>
</center>
<!-- /Google Search with mods -->
+54
View File
@@ -0,0 +1,54 @@
* mbas: Mono's Basic.NET Compiler.
MBAS is a CIL compiler for the Visual Basic language, an extended
version of VisualBasic.NET. It's based on the MCS compiler
and still in heavy development, though many language features are
already supported.
** What works
<ul>
* Classes, Fields and Methods. Properties are still
being worked on.
* Module definition and Sub functionality (TODO: Function's)
* Namespace Import, so can you reference, instantiate
and call external assemblies
* Parameter passing between Sub's. ByVal and ByRef
parameters are being worked on.
* Delegates
* Object creation
* Events - to a limited extent. You can declare a
Class-Field as 'WithEvents' and dynamic events (i.e
AddHandler MyButton.Click, Button1_OnClick). Please
beware: just after committing the code, I discovered
that the handler field in the AddHandler call is
case-sensitive, a remnant of mBas' mcs heritage)
* Statements supported are 'If..Then..Else' ,
'While..End While' and assignment statements. Simple
operators (+, -, *, /, >, <, =) should also
work. Other statements (For..Next, etc.) should be
quite trivial to implement.
</ul>
A lot of this stuff is implemented rebuilding proper expressions and
statements on top of the classes provided by mcs (look at the grammar -
mb-parser.jay - and compare it with cs-parser.jay, if interested).
** TODO-list
At this stage almost every element of the language must be still checked for
conformance to MS'implementation. Help is particularly needed for those areas
I know little of (mcs internals are still quite obscure to me). I'd like to
implement class properties, the missing statements, exception handling,
structures and actual event support (not necessarily in this order). Once we
have all this stuff set up and reasonably bug-free, more work could be done
on helper functions and Object-vars handling.
+34
View File
@@ -0,0 +1,34 @@
* Mono for beginners
Hinne Hettema and Jaime Anguiano Olarra are providing us with
nice and complete set of documents (HOWTOs) about how to install,
configure, run and test the software developed by the Mono Project.
You can read them online, get PDF versions or get the XML sources.
HTML Format (read it online)
For <a href="mono-beginning/t1.html">RPM Linux based systems</a>
For <a href="http://monoevo.sourceforge.net/mono-windows/mono-beginning-windows/t1.html">Microsoft Windows</a>
PDF Format
For <a href="mono-beginning.pdf">RPM Linux based systems</a>
XML Source
For <a href="mono-beginning.xml">RPM Linux based systems</a>
For <a href="http://monoevo.sourceforge.net/mono-windows/mono-beginning-windows.xml">Microsoft Windows</a>
Currently Hinne is working on a Mono Tools HOWTO. Which will be
very useful for the hackers that would like to get in touch with
Mono and Jaime is working out a Mono Beginning HOWTO for Debian
users.
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
+186
View File
@@ -0,0 +1,186 @@
#!/bin/bash
# Script to automate the building of mono and its dependencies on
# cygwin. Relies on wget being installed (could make it fall back to
# using lynx, links, w3, curl etc), assumes that gcc, make, tar,
# automake, etc are already installed too (may be worth testing for
# all that right at the top and bailing out if missing/too old/too new
# etc).
# See where we are. This will become the top level directory for the
# installation, unless we are given an alternative location
here=$1
test -z "$here" && here=`pwd`
echo "Building Mono and dependencies in $here, installing to $here/install"
PATH=$here/install/bin:$here/install/lib:$PATH
# Make sure cygwin's libiconv is installed, or libtool blows its tiny mind
if [ ! -f /usr/lib/libiconv.la ]; then
echo "You need to install the cygwin \"libiconv\" package!"
exit -1
fi
# Check mono out first, so we can run aclocal from inside the mono dir (it
# needs to see which version of the real aclocal to run)
test -z "$CVSROOT" && CVSROOT=:pserver:[email protected]:/mono
export CVSROOT
echo "Updating mono"
# cvs checkout does the same as cvs update, except that it copes with
# new modules being added
# Older versions of cvs insist on a cvs login for :pserver: methods
# Make sure cvs is using ssh for :ext: methods
if [ ${CVSROOT:0:5} = ":ext:" ]; then
CVS_RSH=ssh
export CVS_RSH
elif [ ${CVSROOT:0:9} = ":pserver:" ]; then
if ! grep $CVSROOT ~/.cvspass > /dev/null 2>&1 ; then
echo "Logging into CVS server. Anonymous CVS password is probably empty"
cvs login || exit -1
fi
fi
cvs checkout mono || exit -1
echo "Checking automake version"
automake_required="1.6.2"
automake_version=`automake --version | head -1 | awk '{print $4}' | tr -d '[a-zA-Z]' | sed 's/-.*$//g'`
echo "Found automake version $automake_version"
if expr $automake_version \< $automake_required > /dev/null; then
echo "Your automake is too old! You need version $automake_required or newer."
exit -1
else
echo "Automake version new enough."
fi
# Select the stable version anyway...
if [ ! -z "${AUTO_STABLE}" -o -e /usr/autotool/stable ]; then
export AUTO_STABLE=${AUTO_STABLE:-/usr/autotool/stable}
export AUTO_DEVEL=${AUTO_STABLE}
fi
# Need to install pkgconfig and set ACLOCAL_FLAGS if there is not a
# pkgconfig installed already. Otherwise set PKG_CONFIG_PATH to the
# glib we're about to install in $here/install.
# --print-ac-dir was added in 1.2h according to the ChangeLog. This
# should mean that any automake new enough for us has it.
# This sets ACLOCAL_FLAGS to point to the freshly installed pkgconfig
# if it doesnt already exist on the system (otherwise auto* breaks if
# it finds two copies of the m4 macros). The GIMP for Windows
# pkgconfig sets its prefix based on the location of its binary, so we
# dont need PKG_CONFIG_PATH (the internal pkgconfig config file
# $prefix is handled similarly). For the cygwin pkgconfig we do need to
# set it, and we need to edit the mingw pc files too.
function aclocal_scan () {
# Quietly ignore the rogue '-I' and other aclocal flags that
# aren't actually directories...
#
# cd into mono/ so that the aclocal wrapper can work out which version
# of aclocal to run, and add /usr/share/aclocal too cos aclocal looks there
# too.
for i in `(cd mono && aclocal --print-ac-dir)` /usr/share/aclocal $ACLOCAL_FLAGS
do
if [ -f $i/$1 ]; then
return 0
fi
done
return 1
}
function install_package() {
zipfile=$1
markerfile=$2
name=$3
echo "Installing $name..."
if [ ! -f $here/$zipfile ]; then
wget http://www.go-mono.com/archive/$zipfile
fi
# Assume that the package is installed correctly if the marker
# file is there
if [ ! -f $here/install/$markerfile ]; then
(cd $here/install || exit -1; unzip -o $here/$zipfile || exit -1) || exit -1
fi
}
# pkgconfig is only used during the build, so we can use the cygwin version
# if it exists
if aclocal_scan pkg.m4 ; then
install_pkgconfig=no
else
install_pkgconfig=yes
fi
# But we still need to use the mingw libs for glib & co
ACLOCAL_FLAGS="-I $here/install/share/aclocal $ACLOCAL_FLAGS"
export PATH
export ACLOCAL_FLAGS
# Grab pkg-config, glib etc
if [ ! -d $here/install ]; then
mkdir $here/install || exit -1
fi
# Fetch and install pkg-config, glib, iconv, intl
if [ $install_pkgconfig = "yes" ]; then
install_package pkgconfig-0.11-20020310.zip bin/pkg-config.exe pkgconfig
else
echo "Not installing pkgconfig, you already seem to have it installed"
fi
install_package glib-2.0.4-20020703.zip lib/libglib-2.0-0.dll glib
install_package glib-dev-2.0.4-20020703.zip lib/glib-2.0.lib glib-dev
install_package libiconv-1.7.zip lib/iconv.dll iconv
install_package libintl-0.10.40-20020101.zip lib/libintl-1.dll intl
install_package libgc-dev.zip lib/gc.dll gc-dev
if [ $install_pkgconfig = "no" ]; then
echo "Fixing up the pkgconfig paths"
for i in $here/install/lib/pkgconfig/*.pc
do
mv $i $i.orig
sed -e "s@^prefix=/target\$@prefix=$here/install@" < $i.orig > $i
done
export PKG_CONFIG_PATH=$here/install/lib/pkgconfig
fi
# Needed to find the libgc bits
CPPFLAGS="$CPPFLAGS -I$here/install/include"
LDFLAGS="$LDFLAGS -L$here/install/lib"
export CPPFLAGS
export LDFLAGS
# Make sure we build native w32, not cygwin
#CC="gcc -mno-cygwin"
#export CC
# --prefix is used to set the class library dir in mono, and it needs
# to be in windows-native form. It also needs to have '\' turned into
# '/' to avoid quoting issues during the build.
prefix=`cygpath -w $here/install | sed -e 's@\\\\@/@g'`
# Build and install mono
echo "Building and installing mono"
(cd $here/mono; ./autogen.sh --prefix=$prefix || exit -1; make || exit -1; make install || exit -1) || exit -1
echo ""
echo ""
echo "All done."
echo "Add $here/install/bin and $here/install/lib to \$PATH"
echo "Don't forget to copy the class libraries to $here/install/lib"
+232
View File
@@ -0,0 +1,232 @@
#! /usr/bin/env bash
# Script to automate the building of mono and its dependencies.
# Relies on wget being installed (could make it fall back to using
# lynx, links, w3, curl etc), assumes that gcc, make, tar, automake,
# etc are already installed too (may be worth testing for all that
# right at the top and bailing out if missing/too old/too new etc).
# See where we are. This will become the top level directory for the
# installation, unless we are given an alternative location
here=$1
test -z "$here" && here=`pwd`
echo "Building Mono and dependencies in $here, installing to $here/install"
PATH=$here/install/bin:$PATH
LD_LIBRARY_PATH=$here/install/lib:$LD_LIBRARY_PATH
# Find a tool to fetch files. It must take an HTTP URL on the command line and
# save the file in the current directory. (It must also talk HTTP/1.1, which
# rules out BSD's ftp(1), at least on FreeBSD 4.4.)
viable_downloaders="wget fetch"
for i in $viable_downloaders
do
if which $i > /dev/null; then
downloader=`which $i`
break
fi
done
if [ -z "$downloader" ]; then
echo "Can't find a commandline download tool (tried: $viable_downloaders)"
exit -1
else
echo "Using $downloader to fetch files"
fi
# We need to prefer GNU make if there's a choice. BSD make falls over in
# the glib build if gtk-doc is disabled.
viable_makers="gmake make"
for i in $viable_makers
do
if which $i > /dev/null; then
MAKE=$i
break
fi
done
if [ -z "$MAKE" ]; then
echo "Can't find a make tool (tried: $viable_makers)"
exit -1
else
echo "Using $MAKE"
export MAKE
fi
# Need to install pkgconfig and set ACLOCAL_FLAGS if there is not a
# pkgconfig installed already. Otherwise set PKG_CONFIG_PATH to the
# glib we're about to install in $here/install. This script could
# attempt to be clever and see if glib 2 is already installed, too.
# --print-ac-dir was added in 1.2h according to the ChangeLog. This
# should mean that any automake new enough for us has it.
function aclocal_scan () {
# Quietly ignore the rogue '-I' and other aclocal flags that
# aren't actually directories...
for i in `aclocal --print-ac-dir` $ACLOCAL_FLAGS
do
if [ -f $i/$1 ]; then
return 0
fi
done
return 1
}
function pkgconfig_scan () {
module=$1
echo "Finding pkgconfig files for $module..."
# Should we use locate? or just a list of well-known directories?
# locate has the problem of false positives in src dirs
for i in /usr/lib/pkgconfig /usr/local/lib/pkgconfig
do
echo "Looking in $i..."
if [ -f $i/${module}.pc ]; then
echo $i
return
fi
done
}
function install_package() {
tarfile=$1
dirname=$2
name=$3
configure_options=$4
echo "Installing $name..."
if [ ! -f $here/$tarfile ]; then
(cd $here && $downloader http://www.go-mono.com/archive/$tarfile)
fi
# Assume that the package built correctly if the dir is there
if [ ! -d $here/$dirname ]; then
# Build and install package
(cd $here && tar xzf $tarfile) || exit -1
(cd $here/$dirname; ./configure --prefix=$here/install $configure_options || exit -1; $MAKE || exit -1; $MAKE install || exit -1)
success=$?
if [ $success -ne 0 ]; then
echo "***** $name build failure. Run rm -rf $here/$dirname to have this script attempt to build $name again next time"
exit -1
fi
fi
}
if aclocal_scan pkg.m4 ; then
install_pkgconfig=no
else
install_pkgconfig=yes
fi
if aclocal_scan glib-2.0.m4 ; then
install_glib=no
if [ $install_pkgconfig = "yes" ]; then
# We have to tell the newly-installed pkgconfig about the
# system-installed glib
PKG_CONFIG_PATH=`pkgconfig_scan glib-2.0`:$PKG_CONFIG_PATH
fi
else
install_glib=yes
PKG_CONFIG_PATH="$here/install/lib/pkgconfig:$PKG_CONFIG_PATH"
fi
if [ -f /usr/include/gc/gc.h ]; then
install_libgc=no
else
install_libgc=yes
fi
if [ $install_pkgconfig = "yes" -o $install_glib = "yes" ]; then
ACLOCAL_FLAGS="-I $here/install/share/aclocal $ACLOCAL_FLAGS"
fi
export PATH
export LD_LIBRARY_PATH
export ACLOCAL_FLAGS
export PKG_CONFIG_PATH
# Freebsd puts iconv in /usr/local, so see if we need to add
# /usr/local/include and /usr/local/lib to CPPFLAGS and LDFLAGS. We could
# skip this if it would add /usr/include and /usr/lib, but leaving it
# shouldnt break anything.
iconvh=`locate include/iconv.h`
iconvh_dir=`dirname $iconvh`
iconvlib_dir=`echo $iconvh_dir | sed -e 's/include/lib/'`
echo "Adding $iconvh_dir to CPPFLAGS"
echo "Adding $iconvlib_dir to LDFLAGS"
CPPFLAGS="$CPPFLAGS -I$here/install/include -I$iconvh_dir"
LDFLAGS="$LDFLAGS -L$here/install/lib -L$iconvlib_dir"
export CPPFLAGS
export LDFLAGS
# Grab pkg-config, glib and libgc if necessary
if [ $install_pkgconfig = "yes" ]; then
install_package pkgconfig-0.8.0.tar.gz pkgconfig-0.8.0 pkgconfig ""
else
echo "Not installing pkgconfig, you already seem to have it installed"
fi
if [ $install_glib = "yes" ]; then
install_package glib-2.0.6.tar.gz glib-2.0.6 glib ""
else
echo "Not installing glib, you already seem to have it installed"
fi
if [ $install_libgc = "yes" ]; then
install_package gc6.1alpha5.tar.gz gc6.1alpha5 libgc "--enable-threads=pthreads"
# make install didnt do the headers!
mkdir -p $here/install/include/gc
cp -r $here/gc6.1alpha5/include/* $here/install/include/gc
else
echo "Not installing libgc, you already seem to have it installed"
fi
# End of build dependencies, now get the latest mono checkout and build that
test -z "$CVSROOT" && CVSROOT=:pserver:[email protected]:/mono
export CVSROOT
echo "Updating mono"
# cvs checkout does the same as cvs update, except that it copes with
# new modules being added
# Older versions of cvs insist on a cvs login for :pserver: methods
# Make sure cvs is using ssh for :ext: methods
if [ ${CVSROOT:0:5} = ":ext:" ]; then
CVS_RSH=ssh
export CVS_RSH
elif [ ${CVSROOT:0:9} = ":pserver:" ]; then
# Chop off the trailing /mono because cvs 1.11 adds the port number
# into the .cvspass line
if ! grep ${CVSROOT%:/mono} ~/.cvspass > /dev/null 2>&1 ; then
echo "Logging into CVS server. Anonymous CVS password is probably empty"
cvs login
fi
fi
(cd $here && cvs checkout mono) || exit -1
# Build and install mono
echo "Building and installing mono"
(cd $here/mono; ./autogen.sh --prefix=$here/install || exit -1; $MAKE || exit -1; $MAKE install || exit -1) || exit -1
echo ""
echo ""
echo "All done."
echo "Add $here/install/bin to \$PATH"
echo "Add $here/install/lib to \$LD_LIBRARY_PATH"
echo "Don't forget to copy the class libraries to $here/install/lib"
+551
View File
@@ -0,0 +1,551 @@
<Mono newbie coders start file>
<h1> A little help for mono newbie coders </h1>
For those who are new to Mono and are impatient to contribute
with code (uhh... you are brave!!) here is the document you
should read.
You will see all Mono hackers say the same (great minds have
similar way of thinking): First, DO WRITE TESTS!!!. In order
to do that:
<ul>
* Start with the NUnit Tests Guidelines. In the cvs
they are located at: mcs/class/doc/NUnitGuideli...
* But wait, this is a document for impatient
people. So EVERYTHING should be here. Well, it is.
</ul>
<h2> The NUnit Tests Guidelines document </h2>
Mono NUnit Test Guidelines and Best Practices
Authors: Nick Drochak <[email protected]>
Martin Baulig <[email protected]>
Last Update: 2002-03-02
Rev: 0.3
<b> Purpose </b>
This document captures all the good ideas people have had
about writing NUnit tests for the mono project. This document
will be useful for anyone who writes or maintains unit tests.
<b> Other resources </b>
- mcs/class/README has an explanation of the build process and
how it relates to the tests.
- http://nunit.sourceforge.net is the place to find out about
NUnit
<b> Getting Started </b>
If you are new to writing NUnit tests, there is a template
you may use to help get started. The file is:
mcs/class/doc/TemplateTest.cs
(2.- This is the point two!. This file is just after the end
of the guidelines. Copy/paste it in another buffer. And keep
reading.)
Save a copy of this file in the appropriate test subdirecty
(see below), and replace all the [text] markers with
appropriate code. Comments in the template are there to guide
you. You should also look at existing tests to see how other
people have written them.
mcs/class/corlib/Test/System.Collections/CollectionBaseTest.cs
is a small one that might help.
(3.- You reached the third point. And as expected, it's just
here to tell you that the content of CollectionBaseTest.cs is
after the TemplateTest.cs code at the end of these
guidelines.)
The directory that will contain your new file depends on the
assembly/namespace of the class for which you are creating the
tests. Under mcs/class there is a directory for each assembly.
In each assembly there is a Test directory, e.g.
mcs/class/corlib/Test. In the Test directory there are
sub-directories for each namespace in the assembly, e.g.
mcs/class/corlib/Test/Sytem. Put your new test file in the
appropriate sub-directory under Test for the class you are
testing.
Once your test class is complete, you need to add it to the
AllTests.cs file in the same directory as your new test. Add a
call to "suite.AddTest()" passing the name of your new test
class's suite property as the parameter. You will see examples
in the AllTests.cs file, so just copy and paste inside there.
Once all of that is done, you can do a 'make test' from the top
mcs directory. Your test class will be automagically included
in the build and the tests will be run along with all the
others.
<b> Tips </b>
<b> Provide an unique error message for Assert() </b>
Include an unique message for each Assert() so that when the
assert fails, it is trivial to locate the failing one.
Otherwise, it may be difficult to determine which part of the
test is failing. A good way to ensure unique messages is to use
something like #A01, #A02 etc.
Bad:
<pre>
AssertEquals("array match", compare[0], i1[0]);
AssertEquals("array match", compare[1], i1[1]);
AssertEquals("array match", compare[2], i1[2]);
AssertEquals("array match", compare[3], i1[3]);
</pre>
Good:
<pre>
AssertEquals("#A01", compare[0], i1[0]);
AssertEquals("#A02", compare[1], i1[1]);
AssertEquals("#A03", compare[2], i1[2]);
AssertEquals("#A04", compare[3], i1[3]);
</pre>
Once you used such a number in an Assert(), don't change it
later on - people might use it it identify the test in bug
reports or in mailing lists.
<b> Use AssertEquals() to compare things, not Assert(). </b>
Never compare two values with Assert() - if the test fails,
people have no idea what went wrong while AssertEquals()
reports the failed value.
Bad:
<pre>
Assert ("A01", myTicks[0] == t1.Ticks);
</pre>
Good:
<pre>
AssertEquals ("A01", myTicks[0], t1.Ticks);
</pre>
<b> Constructors </b>
When writing your testcase, please make sure to provide a
constructor which takes no arguments:
<pre>
public class DateTimeTest : TestCase
{
public DateTimeTest() : base ("[MonoTests.System.DateTimeTest]") {}
public DateTimeTest (string name): base(name) {}
public static ITest Suite
{
get {
TestSuite suite = new TestSuite ();
return suite;
}
}
}
</pre>
<b> Namespace </b>
Please keep the namespace within each test directory
consistent - all tests which are referenced in the same
AllTests.cs must be in the same namespace. Of course you can
use subnamespaces as you like - especially for subdirectories
of your testsuite.
For instance, if your AllTests.cs is in namespace "MonoTests"
and you have a subdirectory called "System", you can put all
the tests in that dir into namespace "MonoTests.System".
<b> Test your test with the microsoft runtime </b>
If possible, try to run your testsuite with the Microsoft
runtime on Windows and make sure all tests in it pass. This is
especially important if you're writing a totally new testcase
- without this check you can never be sure that your testcase
contains no bugs ....
Don't worry if you're writing your test on Linux, other people
can test it for you on Windows.
Sometimes you may discover that a test doesn't show the
expected result when run with the Microsoft runtime - either
because there is a bug in their runtime or something is
misleading or wrong in their documentation. In this case,
please put a detailed description of the problem to
mcs/class/doc/API-notes and do also report it to the list -
we'll forward this to the Microsoft people from time to time
to help them fix their documentation and runtime.
<pre>
-------------------- TemplateTest.cs begins ----------
// this is a template for making NUnit tests. Text enclosed
// in square brackets (and the brackets themselves) should be
// replaced by appropiate code.
// [File Name].cs - NUnit Test Cases for [explain here]
//
// [Author Name] ([Author email Address])
//
// (C) [Copyright holder]
//
// these are the standard namespaces you will need. You may
// need to add more depending on your tests.
using NUnit.Framework;
using System;
// all test namespaces start with "MonoTests." Append the
// Namespace that contains the class you are testing, e.g.
// MonoTests.System.Collections
namespace MonoTests.[Namespace]
{
// the class name should end with "Test" and start with the name
// of the class you are testing, e.g. CollectionBaseTest
public class [Class to be tested]Test : TestCase {
// there should be two constructors for your class. The first
// one (without parameters) should set the name to something
// unique.
// Of course the name of the method is the same as the name of
// the class
public [Constructor]() : base ("[Namespace.Class]") {}
public [Constructor](string name) : base(name) {}
// this method is run before each Test* method is called. You
// can put variable initialization, etc. here that is common to
// each test.
// Just leave the method empty if you don't need to use it.
protected override void SetUp() {}
// this method is run after each Test* method is called. You
// can put clean-up code, etc. here. Whatever needs to be done
// after each test. Just leave the method empty if you don't need
// to use it.
protected override void TearDown() {}
// this property is required. You need change the parameter for
// typeof() below to be your class.
public static ITest Suite {
get {
return new TestSuite(typeof([Classname here]));
}
}
// this is just one of probably many test methods in your test
// class. each test method must start with "Test". All methods
// in your class which start with "Test" will be automagically
// called by the NUnit framework.
public void Test[Something] {
// inside here you will exercise your class and then
// call Assert()
}
}
---------------------- TemplateTest.cs ends --------------
---------------------- CollectionBaseTest.cs begins ------
//
// System.Collections.CollectionBase
// Test suite for System.Collections.CollectionBase
//
// Author:
// Nick D. Drochak II
//
// (C) 2001 Nick D. Drochak II
//
using System;
using System.Collections;
using NUnit.Framework;
namespace MonoTests.System.Collections
{
public class CollectionBaseTest : TestCase
{
public CollectionBaseTest () : base
("System.Collection.CollectionBase testsuite")
{}
public CollectionBaseTest (String name) : base (name)
{}
// We need a concrete class to test the abstract base
// class
public class ConcreteCollection : CollectionBase
{
// These fields are used as markers to test
// the On* hooks.
public bool onClearFired;
public bool onClearCompleteFired;
public bool onInsertFired;
public int onInsertIndex;
public bool onInsertCompleteFired;
public int onInsertCompleteIndex;
public bool onRemoveFired;
public int onRemoveIndex;
public bool onRemoveCompleteFired;
public int onRemoveCompleteIndex;
public bool onSetFired;
public int onSetOldValue;
public int onSetNewValue;
public bool onSetCompleteFired;
public int onSetCompleteOldValue;
public int onSetCompleteNewValue;
// This constructor is used to test OnValid()
public ConcreteCollection()
{
IList listObj;
listObj = this;
listObj.Add(null);
}
// This constructor puts consecutive integers into the list
public ConcreteCollection(int i) {
IList listObj;
listObj = this;
int j;
for (j = 0; j< i; j++) {
listObj.Add(j);
}
}
// A helper method to look at a value in the
// list at a specific index
public int PeekAt(int index)
{
IList listObj;
listObj = this;
return (int) listObj[index];
}
// Mark the flag if this hook is fired
protected override void OnClear() {
this.onClearFired = true;
}
// Mark the flag if this hook is fired
protected override void OnClearComplete()
{
this.onClearCompleteFired = true;
}
// Mark the flag, and save the paramter if
// this hook is fired
protected override void OnInsert(int index,
object value)
{
this.onInsertFired = true;
this.onInsertIndex = index;
}
// Mark the flag, and save the paramter if
// this hook is fired
protected override void OnInsertComplete(int index,
object value)
{
this.onInsertCompleteFired = true;
this.onInsertCompleteIndex = index;
}
// Mark the flag, and save the paramter if this hook
// is fired
protected override void OnRemove(int index,
object value)
{
this.onRemoveFired = true;
this.onRemoveIndex = index;
}
// Mark the flag, and save the paramter if this hook
// is fired
protected override void OnRemoveComplete(int index,
object value)
{
this.onRemoveCompleteFired = true;
this.onRemoveCompleteIndex = index;
}
// Mark the flag, and save the paramters if this hook
// is fired
protected override void OnSet(int index, object oldValue,
object newValue)
{
this.onSetFired = true;
this.onSetOldValue = (int) oldValue;
this.onSetNewValue = (int) newValue;
}
// Mark the flag, and save the paramters if this hook
// is fired
protected override void OnSetComplete(int index,
object oldValue,
object newValue)
{
this.onSetCompleteFired = true;
this.onSetCompleteOldValue = (int) oldValue;
this.onSetCompleteNewValue = (int) newValue;
}
} // public class ConcreteCollection
public static ITest Suite {
get {
return new TestSuite
(typeof(CollectionBaseTest));
}
}
// Check the count property
public void TestCount() {
ConcreteCollection myCollection;
myCollection = new ConcreteCollection(4);
Assert(4 == myCollection.Count);
}
// Make sure GetEnumerator returns an object
public void TestGetEnumerator() {
ConcreteCollection myCollection;
myCollection = new ConcreteCollection(4);
Assert(null != myCollection.GetEnumerator());
}
// OnValid disallows nulls
public void TestOnValid() {
ConcreteCollection myCollection;
try {
myCollection = new ConcreteCollection();
}
catch (ArgumentNullException) {
}
}
// Test various Insert paths
public void TestInsert() {
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
// The constructor inserts
myCollection = new ConcreteCollection(numberOfItems);
Assert(myCollection.onInsertFired);
Assert(myCollection.onInsertCompleteFired);
// Using the IList interface, check inserts in the middle
IList listObj = myCollection;
listObj.Insert(1, 9);
Assert(myCollection.onInsertIndex == 1);
Assert(myCollection.onInsertCompleteIndex == 1);
Assert(myCollection.PeekAt(1) == 9);
}
// Test Clear and it's hooks
public void TestClear()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 1;
myCollection = new ConcreteCollection(numberOfItems);
myCollection.Clear();
Assert(myCollection.Count == 0);
Assert(myCollection.onClearFired);
Assert(myCollection.onClearCompleteFired);
}
// Test RemoveAt, other removes and the hooks
public void TestRemove()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
// Set up a test collection
myCollection = new ConcreteCollection(numberOfItems);
// The list is 0-based. So if we remove the second one
myCollection.RemoveAt(1);
// We should see the original third one in it's place
Assert(myCollection.PeekAt(1) == 2);
Assert(myCollection.onRemoveFired);
Assert(myCollection.onRemoveIndex == 1);
Assert(myCollection.onRemoveCompleteFired);
Assert(myCollection.onRemoveCompleteIndex == 1);
IList listObj = myCollection;
listObj.Remove(0);
// Confirm parameters are being passed to the hooks
Assert(myCollection.onRemoveIndex == 0);
Assert(myCollection.onRemoveCompleteIndex == 0);
}
// Test the random access feature
public void TestSet()
{
ConcreteCollection myCollection;
int numberOfItems;
numberOfItems = 3;
myCollection = new ConcreteCollection(numberOfItems);
IList listObj = myCollection;
listObj[0] = 99;
Assert((int) listObj[0] == 99);
Assert(myCollection.onSetFired);
Assert(myCollection.onSetCompleteFired);
Assert(myCollection.onSetOldValue == 0);
Assert(myCollection.onSetCompleteOldValue == 0);
Assert(myCollection.onSetNewValue == 99);
Assert(myCollection.onSetCompleteNewValue == 99);
}
}
}
----------------------- CollectionBaseTest.cs ends --------
</pre>
<ul>
* If you use Emacs, you might want to use the .emacs
file and the package developed by Brad Merrill
mailto:[email protected]. It will allow you to
highlight and indent in C# style in your Emacs
editor. (XEmacs will still work but it'll also
complain).
* CSharpDevelop is a GPLed IDE developed by IC#Code.
Search for it at sourceforge if you are interested
in it.
* For those who Java: "A comparison of Microsoft's
C# programming language to Sun Microsystem's Java
Programming language" by Dare Obasanjo is a really good
(very complete) text to read.
* Suggest this point and more, now I can't think of
anything more.
</ul>
Enjoy!!.
(c) 2002, <a href="mailto:[email protected]">Jaime Anguiano Olarra</a>.
The parts included in this document are property of their
respective authors.
Note: The identation of the source code has been changed a bit
so it could fit better in the website. Anyway, as nothing more
changed, the files should work as expected.
+755
View File
@@ -0,0 +1,755 @@
* MonoDoc XML Tag Reference
** Introduction
<em>
[This documentation is in progress. Comments to
<a href="mailto:[email protected]">[email protected]</a> and/or
<a href="mailto:[email protected]">[email protected]</a>.]
</em>
MonoDoc XML, our format for multilingual API documentation stored outside of
source files, is very similar to the output of Microsoft's csc /doc. Minor
alterations have been made to ease human parsing and hand-editing, but
the majority of the tags are identical. In fact, many of the descriptions
and examples below are taken from the ECMA C# Language Specification with
little or no alteration.
This document provides a list of all available MonoDoc XML tags, with
syntax and examples. A complete example can be found in
<a href="#appendix-a">Appendix A</a>, and both a <a href="#">DTD</a> and
<a href="#">XSD schema</a> will be available very shortly.
** MonoDoc XML Tags
<dl>
<dt><code><a href="#c">&lt;c&gt;</a></code></dt>
<dd>Mark short sections of text as code.</dd>
<dt><code><code><a href="#code">&lt;code&gt;</a></code></dt></code>
<dd>Mark one or more lines as code or output.</dd>
<dt><code><a href="#doc">&lt;doc&gt;</a></dt></code>
<dd>Root element of documentation XML.</dd>
<dt><code><a href="#event">&lt;event&gt;</a></dt></code>
<dd>Describe an event.</dd>
<dt><code><a href="#example">&lt;example&gt;</a></dt></code>
<dd>An example.</dd>
<dt><code><a href="#exception">&lt;exception&gt;</a></dt></code>
<dd>Specify an exception a method can throw.</dd>
<dt><code><a href="#field">&lt;field&gt;</a></dt></code>
<dd>Describe a field.</dd>
<dt><code><a href="#list">&lt;list&gt;</a></dt></code>
<dd>Create a list or table.</dd>
<dt><code><a href="#method">&lt;method&gt;</a></dt></code>
<dd>Describe a method.</dd>
<dt><code><a href="#para">&lt;para&gt;</a></dt></code>
<dd>Allow text to be structured in paragraphs.</dd>
<dt><code><a href="#param">&lt;param&gt;</a></dt></code>
<dd>Specify a parameter for a method.</dd>
<dt><code><a href="#paramref">&lt;paramref&gt;</a></dt></code>
<dd>Mark a word as a parameter.</dd>
<dt><code><a href="#permission">&lt;permission&gt;</a></dt></code>
<dd>Define the access level of a member.</dd>
<dt><code><a href="#property">&lt;property&gt;</a></dt></code>
<dd>Describe a property.</dd>
<dt><code><a href="#remarks">&lt;remarks&gt;</a></dt></code>
<dd>Provide verbose information for a type or member.</dd>
<dt><code><a href="#returns">&lt;returns&gt;</a></dt></code>
<dd>Specify the return value of a method.</dd>
<dt><code><a href="#see">&lt;see&gt;</a></dt></code>
<dd>Specify a link.</dd>
<dt><code><a href="#seealso">&lt;seealso&gt;</a></dt></code>
<dd>Specify a 'see also' entry.</dd>
<dt><code><a href="#summary">&lt;summary&gt;</a></dt></code>
<dd>Provide a brief (usually one sentence) description of a member or type.</dd>
<dt><code><a href="#type">&lt;type&gt;</a></dt></code>
<dd>Describe a type.</dd>
</dl>
** Definitions and Examples
*** <a name="c">&lt;c&gt;</a>
This tag can be used to mark short, inline fragments of text that should
be considered source code or program output. User agents should render
this tag in a special -- likely monospace -- font. For larger sections,
use <a href="#code"><code>&lt;code&gt;</code></a>.
**** Syntax
<pre>
&lt;c&gt;code or output text&lt;/c&gt;
</pre>
**** Example
<pre>
&lt;remarks&gt;
Class &lt;c&gt;Point&lt;/c&gt; models a point in two-dimensional space.
&lt;/remarks&gt;
</pre>
*** <a name="code">&lt;code&gt;</a>
This tag can be used to mark one or more lines of text as source code or
program output. User agents should render this tag in a special (likely
monospace) font, and preserve both whitespace and newlines.
**** Syntax
<code>&lt;code&gt;source or program output&lt;/code&gt;</code>
**** Example
<pre>
&lt;summary&gt;
This method changes the point's location by the given
x- and y-offsets.
&lt;example lang="C#"&gt;
A C# example:
&lt;code&gt;
Point p = new Point(3, 5);
p.Translate(-1, 3);
// p == (2, 8);
&lt;/code&gt;
&lt;/example&gt;
&lt;/summary&gt;
</pre>
*** <a name="doc">&lt;doc&gt;</a>
This tag is the root element of the documentation file. It can contain
any number of &lt;type&gt; elements.
**** Syntax
<code>&lt;doc lang="language" assembly="assembly"&gt;typedocs&lt;/doc&gt;</code>
<blockquote>
<em>lang="language"</em><br />
The two-letter ISO code that specifies what language the contained
documentation is written in.
</blockquote>
**** Example
<pre>
&lt;doc lang="en"&gt;
&lt;type name="Graphics.Point"&gt;
&lt;!-- ... --&gt;
&lt;/type&gt;
&lt;/doc&gt;
</pre>
*** <a name="event">&lt;event&gt;</a>
This tag documents an event.
**** Syntax
<code>&lt;event name="eventname"&gt;documentation&lt;/event&gt;</code>
<blockquote>
<em>name="eventname"</em><br />
The name of the event being documented.
</blockquote>
**** Example
<pre>
&lt;event name="Click"&gt;
&lt;summary&gt;
Occurs when the control is clicked.
&lt;/summary&gt;
&lt;data&gt;
The event handler receives an argument of type EventArgs
containing data related to this event.
&lt;/data&gt;
&lt;remarks&gt;
&lt;para&gt;The ControlStyles.StandardClick style must be set
for this event to be raised.&lt;/para&gt;
&lt;para&gt;For more information about handling events, see
Consuming Events.&lt;/para&gt;
&lt;/remarks&gt;
&lt;/event&gt;
</pre>
*** <a name="example">&lt;example&gt;</a>
This tag marks a section of text as an example, and optionally specifies
what programming language <code><a href="#code">&lt;code&gt;</a></code> portions of the example are written in.
**** Syntax
<code><example lang="language">example text and code</example></code>
<blockquote>
<em>lang="language"</em><br />
(optional) The name of the programming language <code><a href="#code">&lt;code&gt;</a></code> blocks in this example
use. This information can be used by user agents to provide
intelligent access to examples in multiple languages.
</blockquote>
**** Example
See <code><a href="#code">&lt;code&gt;<a/></code> for an example.
*** <a name="exception">&lt;exception&gt;</a>
This tag provides a way to specify the exceptions a method can throw.
**** Syntax
<code>&lt;exception cref="exception-type"&gt;description&lt;/exception&gt;</code>
<blockquote>
<em>cref="exception-type"</em><br />
The name of an exception type.
</blockquote>
**** Example
<pre>
&lt;exception cref="System.IO.FileNotFoundException"&gt;
Thrown when the requested file is not found.
&lt;/exception&gt;
</pre>
*** <a name="field">&lt;field&gt;</a>
This tag is used to describe a field.
**** Syntax
<code>&lt;field name="fieldname"&gt;documentation&lt;/field&gt;</code>
<blockquote>
<em>name="fieldname"</em><br />
The name of the field being documented.
</blockquote>
**** Example
<pre>
&lt;field name="x"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;x&lt;/c&gt; represents the point's
x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
</pre>
*** <a name="list">&lt;list&gt;</a>
This tag is used to create a list or table of items. It may contain a
<code>&lt;listheader&gt;</code> block to define the heading row of either a table or
definition list. (When defining a table, only an entry for 'term' in the
heading need be supplied.)
Each item in the list is specified with an <code>&lt;item&gt;</code> block. When creating a
definition list, both <code>&lt;term&gt;</code> and <code>&ltdescription&gt;</code> must be specified.
However, for a table, bulleted list, or numbered list, only <code>&lt;description&gt;</code>
need be specified.
**** Syntax
<pre>
&lt;list type="bullet" | "number" | "table"&gt;
&lt;listheader&gt;
&lt;term&gt;term&lt;/term&gt;
&lt;description&gt;description&lt;/description&gt;
&lt;/listheader&gt;
&lt;item&gt;
&lt;term&gt;term&lt;/term&gt;
&lt;description&gt;description&lt;/description&gt;
&lt;/item&gt;
...
&lt;/list&gt;
</pre>
<blockquote>
<em>term</em><br />
The term to define, whose definition is in <code>&lt;description&gt;</code>.
<br /><br />
<em>description</em><br />
Either an item in a bullet or numbered list, or the definition of a <code>&lt;term&gt;</code>.
</blockquote>
**** Example
<pre>
&lt;list type="bullet"&gt;
&lt;item&gt;
&lt;description&gt;Item 1&lt;/description&gt;
&lt;/item&gt;
&lt;item&gt;
&lt;description&gt;Item 2&lt;/description&gt;
&lt;/item&gt;
&lt;/list&gt;
</pre>
*** <a name="method">&lt;method&gt;</a>
This tag is the overall containing tag for documenting a method.
**** Syntax
<code>&lt;method name="methodname"&gt;documentation&lt;/method&gt;</code>
**** Example
<pre>
&lt;method name="op_Equality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;
This operator determines whether two points have
the same location.
&lt;/summary&gt;
&lt;param name="p1"&gt;
&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.
&lt;/param&gt;
&lt;param name="p2"&gt;
&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.
&lt;/param&gt;
&lt;returns&gt;
True if the points have the same location and they
have the exact same type; otherwise, false.
&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
</pre>
*** <a name="para">&lt;para&gt;</a>
This tag is for use inside other tags such as <code>&lt;remarks&gt;</code> or <code>&lt;returns&gt;</code>, and
allows text to be structured into paragraphs.
**** Syntax
<code>&lt;para&gt;text&lt;/para&gt;</code>
**** Example
<pre>
&lt;summary&gt;
&lt;para&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt; class testing
program.
&lt;/para&gt;
&lt;para&gt;
This program tests each method and operator, and
is intended to be run after any non-trivial maintenance has
been performed on the &lt;c&gt;Point&lt;/c&gt; class.
&lt;/para&gt;
&lt;/summary&gt;
</pre>
*** <a name="param">&lt;param&gt;</a>
This tag is used to describe a parameter for a method, constructor, or
indexer.
**** Syntax
<code>&lt;param name="name"&gt;description&lt;/param&gt;</code>
<blockquote>
<em>name</em><br />
The name of the parameter.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt;
class.
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name "yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
</pre>
*** <a name="paramref">&lt;paramref&gt;</a>
This tag is used to indicate that a word is a parameter. User agents
could use this information for special formatting or hyperlink insertion.
**** Syntax
<code>&lt;paramref name="name" /&gt;</code>
<blockquote>
<em>name</em><br />
The name of the parameter.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This constructor initializes the new Point to
(&lt;paramref name="xor" /&gt;,&lt;paramref name="yor" /&gt;).
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name "yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
</pre>
*** <a name="permission">&lt;permission&gt;</a>
This tag allows the security accessibility of a member to be documented.
**** Syntax
<code>&lt;permission cref="member"&gt;description&lt;/permission&gt;</code>
<blockquote>
<em>cref="member"</em><br />
The name of a member.</br>
</blockquote>
**** Example
<pre>
&lt;permission cref="System.Security.PermissionSet"&gt;
Everyone can access this method.
&lt;/permission&gt;
</pre>
*** <a name="property">&ltproperty&gt;</a>
This tag is the overall containing tag for documenting a property.
**** Syntax
<code>&lt;property name="propertyname"&gt;documentation&lt;/property&gt;</code>
<blockquote>
<em>name="propertyname"</em><br />
The name of the property.
</blockquote>
**** Example
<pre>
&lt;property name="X"&gt;
&lt;summary&gt;
Gets or sets the point's x-coordinate.
&lt;value&gt;
The point's x-coordinate.
&lt;/value&gt;
&lt;/property&gt;
</pre>
*** <a name="remarks">&lt;remarks&gt;</a>
This tag contains extended discussion and information about a member or
a type. <em>[jbarn: This differs from both the ECMA docs and
portions of Microsoft's documentation, but seems consistent with both
common usage, and, more importantly, NDoc convention.]</em>
**** Syntax
<code>&lt;remarks&gt;description&lt;/remarks&gt;</code>
**** Example
<pre>
&lt;type name="Graphics.Point"&gt;
&lt;summary&gt;
Models a point in a two-dimensional plane.
&lt;/summary&gt;
&lt;remarks&gt;
Herein I might have an extended discussion of
the validity of Cartesian coordinate systems,
with examples pro and con, and perhaps
some code.
&lt;/remarks&gt;
&lt;!-- ... --&gt;
&lt;/type&gt;
</pre>
*** <a name="returns">&lt;returns&gt;</a>
This tag is used to describe the return value of a method.
**** Syntax
<code>&lt;returns&gt;description&lt;/returns&gt;</code>
**** Example
<pre>
&lt;method name="op_Inequality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;
This operator determines whether two points have the
same location.
&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;
True if the points do not have the same location and they
have the exact same type; otherwise, false.
&lt;/returns&gt;
&lt;/method&gt;
</pre>
*** <a name="see">&lt;see&gt;</a>
This tag allows a link to be specified within documentation text. (Use
<code>&lt;seealso&gt;</code> to indicate links that should appear in a 'See Also' section.)
**** Syntax
<code>&lt;see cref="destination" /&gt;</code>
<blockquote>
<em>cref="destination"</em><br />
A destination, such as a type or a member of a type.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This method changes the point's location to the given
coordinates. This is an asinine way to insert a link,
but &lt;see cref="Equals(Object)" /&gt; to understand
how points are compared.
&lt;/summary&gt;
</pre>
*** <a name="seealso">&lt;seealso&gt;</a>
This tag allows an entry to be generated for the 'See Also' section. (Use
<code>&lt;see&gt;</code> to specify a link from within text.)
**** Syntax
<code>&lt;seealso cref="destination" /&gt;</code>
<blockquote>
<em>cref="destination"</em><br />
A destination, such as a type or a member of a type.
</blockquote>
**** Example
<pre>
&lt;summary&gt;
This method determines whether two Points have the
same location.
&lt;/summary&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point" /&gt;
</pre>
*** <a name="summary">&lt;summary&gt;</a>
This tag contains a short summary of a member or type,
often one sentence. <em>[jbarn: This differs from both the ECMA docs and
portions of Microsoft's documentation, but seems consistent with both
common usage, and, more importantly, NDoc convention.]</em>
**** Syntax
<code>&lt;summary&gt;description&lt;/summary&gt;</code>
**** Example
<pre>
&lt;summary&gt;
This is the entry point of the &lt;c&gt;Point&lt;/c&gt; class testing
program.
&lt;/summary&gt;
&lt;remarks&gt;
This program tests each method an operator, and is intended
to be run after any non-trivial maintenance is performed
on the &lt;c&gt;Point&lt;/c&gt; class.
&lt;/remarks&gt;
</pre>
*** <a name="type">&lt;type&gt;</a>
This tag is the overall containing tag for documenting a type.
**** Syntax
<code>&lttype name="typename" assembly="assemblyname"&gt;documentation&lt;/type&gt;</code>
<blockquote>
<em>name="typename"</em><br />
The name of the type being documented.
<br /><br />
<em>assembly="assemblyname"</em><br />
The assembly this type resides in. This attribute is not required for nested types.
</blockquote>
**** Example
<pre>
&lt;type name="Graphics.Point" assembly="Point"&gt;
&lt;summary&gt;
Models a point in two-dimensional space.
&lt;/summary&gt;
&lt;!-- members --&gt;
&lt;field name="x"&gt;
&lt;summary&gt;
Represents the point's x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;/type&gt;
</pre>
** <a name="appendix-a">Appendix A: Complete Example</a>
<em>[jbarn: Please, please, don't take the human-readable portions of
this example to be good guidelines for writing your own documentation.
this XML is intended only to show structure.]</em>
<pre>
&lt;?xml version="1.0" encoding="UTF-8"?&gt;
&lt;doc lang="en"&gt;
&lt;type name="Graphics.Point" assembly="Point"&gt;
&lt;summary&gt;
Models a point in a two-dimensional plane.
&lt;/summary&gt;
&lt;remarks&gt;
No useful remarks.
&lt;/remarks&gt;
&lt;!-- fields --&gt;
&lt;field name="x"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;x&lt;/c&gt; represents the point's x-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;field name="y"&gt;
&lt;summary&gt;
Instance variable &lt;c&gt;y&lt;/c&gt; represents the point's y-coordinate.
&lt;/summary&gt;
&lt;/field&gt;
&lt;!-- methods --&gt;
&lt;method name="#ctor"&gt;
&lt;summary&gt;
Initializes the new point to &lt;c&gt;(0,0)&lt;/c&gt;.
&lt;/summary&gt;
&lt;/method&gt;
&lt;method name="#ctor(System.Int32,System.Int32)"&gt;
&lt;summary&gt;
Initializes the new Point to (&lt;paramref name="xor" /&gt;,&lt;paramref name="yor" /&gt;).
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
&lt;/method&gt;
&lt;method name="Move(System.Int32,System.Int32)"&gt;
&lt;summary&gt;
This method changes the point's location to the given coordinates.
&lt;/summary&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the new x-coordinate.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the new y-coordinate.&lt;/param&gt;
&lt;seealso cref="Translate(System.Int32,System.Int32)" /&gt;
&lt;/method&gt;
&lt;method name="Translate(System.Int32,System.Int32)"&gt;
&lt;summary&gt;This method changes the point's location by the given x- and y-offsets.&lt;/summary&gt;
&lt;remarks&gt;
&lt;example lang="C#"&gt;
A C# example:
&lt;code&gt;
Point p = new Point(3, 5);
p.Translate(-1, 3);
&lt;/code&gt;
This code results in &lt;c&gt;p&lt;/c&gt; having the value (2,8).
&lt;/example&gt;
&lt;/remarks&gt;
&lt;param name="xor"&gt;&lt;c&gt;xor&lt;/c&gt; is the relative x-offset.&lt;/param&gt;
&lt;param name="yor"&gt;&lt;c&gt;yor&lt;/c&gt; is the relative y-offset.&lt;/param&gt;
&lt;seealso cref="Move(System.Int32,System.Int32)" /&gt;
&lt;/method&gt;
&lt;method name="Equals(System.Object)"&gt;
&lt;summary&gt;This method determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="o"&gt;&lt;c&gt;o&lt;/c&gt; is the object to be compared to the current object.&lt;/param&gt;
&lt;returns&gt;True if the Points have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point" /&gt;
&lt;/method&gt;
&lt;method name="ToString"&gt;
&lt;summary&gt;Report a point's location as a string.&lt;/summary&gt;
&lt;returns&gt;A string representing a point's location, in the form (x,y), without any
leading, trailing, or embedded whitespace.&lt;/returns&gt;
&lt;/method&gt;
&lt;method name="op_Equality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;This operator determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;True if the points have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Inequality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
&lt;method name="op_Inequality(Graphics.Point,Graphics.Point)"&gt;
&lt;summary&gt;This operator determines whether two points have the same location.&lt;/summary&gt;
&lt;param name="p1"&gt;&lt;c&gt;p1&lt;/c&gt; is the first Point to be compared.&lt;/param&gt;
&lt;param name="p2"&gt;&lt;c&gt;p2&lt;/c&gt; is the second Point to be compared.&lt;/param&gt;
&lt;returns&gt;True if the points do not have the same location and they have the exact same
type; otherwise, false.&lt;/returns&gt;
&lt;seealso cref="Equals(System.Object)" /&gt;
&lt;seealso cref="op_Equality(Graphics.Point,Graphics.Point)" /&gt;
&lt;/method&gt;
&lt;method name="Main"&gt;
&lt;summary&gt;
This is the entry point of the Point class testing program.
&lt;/summary&gt;
&lt;remarks&gt;
&lt;para&gt;This program tests each method and operator, and is intended to be run after
any non-trivial maintenance has been performed on the Point class.&lt;/para&gt;
&lt;/remarks&gt;
&lt;/method&gt;
&lt;!-- properties --&gt;
&lt;property name="X"&gt;
&lt;value&gt;Property &lt;c&gt;X&lt;/c&gt; represents the point's x-coordinate.&lt;/value&gt;
&lt;/property&gt;
&lt;property name="Y"&gt;
&lt;value&gt;Property &lt;c&gt;y&lt;/c&gt; represents the point's y-coordinate.&lt;/value&gt;
&lt;/property&gt;
&lt;/type&gt;
&lt;/doc&gt;
</pre>
Executable
+270
View File
@@ -0,0 +1,270 @@
* MySQL Data Provider
<ul>
<li>MySQL Data Provider for
<a href="http://www.mysql.com/">MySQL</a> databases. It is written in C# and uses
the MySQL C Client Library</li>
<li>Exists in namespace Mono.Data.MySql and assembly Mono.Data.MySql</li>
<li>Works on Windows and Linux via the MySQL client shared library
(libmySQL.dll on Windows and libmysqlclient.so on Linux).</li>
<li>Started by Daniel Morgan using
<a href="http://www.cybercom.net/~zbrad/DotNet/MySql/">C# Bindings to MySQL</a> from <a href="mailto:[email protected]">Brad Merill</a>
<li><a href="http://www.mysql.com/articles/dotnet/">Exploring MySQL in the Microsoft .NET Environment</a> is an article
by Mr. Venu who is a MySQL AB developer.</li>
<li>There is a good alternative to the provider in Mono:
<ul>
<li><a href="http://sourceforge.net/projects/mysqlnet/">MySQLNet</a> from ByteFX
is a MySQL Managed provider written in 100% C#,
does not require a client library, and works on Microsoft .NET and Mono. You
need at least Mono 0.18 and MySQLNet 0.65 for it to work on Mono.</li>
</ul>
</li>
<li>Testing for Mono's Mono.Data.MySql and ByteFX's ByteFX.Data.MySQLClient is below...</li>
</ul>
** Current Status
<ul>
<li>can connect
<li>can execute non-queries via ExecuteNonQuery()
<li>can execute aggregates via ExecuteScalar() and retrieve the
single row/single column result
<li>can execute queries and retrieve results using a data reader.
<li>a schema DataTable has been partially
implemented which is returned from GetSchemaTable() in MySqlDataReader.
<li>a DataTable in a DataSet can be filled via a MySqlDataAdapter
<li>The shared client libraries
between windows version and linux are different: windows has libmySQL.dll
while linux has libmysqlclient.so. This is handled by the
file etc/mono/config which is mapped by the mono runtime in knowing
which native shared library to load. In cvs, this file is mono/config.in and
can be modified with a text editor.
</ul>
** Action plan
The current plan to work on the MySQL data provider:
<ul>
<li>Parameters support via MySqlParameter and MySqlParameterCollection
<li>Support LOBs (Large Object)
<li>Change the MySQL provider to not be dependent on a client library and
be written in 100% C#
<li>Connection pooling
<li>Get the provider to work like other data providers
</ul>
** Testing for Mono's MySQL provider (Mono.Data.MySql)
<ul>
<li>Have access to a MySQL database or download it from
<ul>
<li><a href="http://www.mysql.com/downloads/index.html">MySQL AB</a></li>
</ul>
</li>
<li>Take a look at MySqlTest.cs in mcs/class/Mono.Data.MySql/Test</li>
<li>Has a ConnectionString format:
<pre>
"Server=hostname;" +
"Database=database;" +
"User ID=username;" +
"Password=password"
(or)
"host=hostname;" +
"dbname=database;" +
"user=username;" +
"passwd=password"
</pre>
<li>C# Example:
<pre>
using System;
using System.Data;
using Mono.Data.MySql;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=mysql;" +
"Password=;";
IDbConnection dbcon;
dbcon = new MySqlConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.ConnectionString = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs \
-r System.Data.dll \
-r Mono.Data.MySql.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll \
-r Mono.Data.MySql.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
** Testing for MySQLNet provider (ByteFX.Data.MySQLClient)
<ul>
<li>Have access to a MySQL database or download it from
<ul>
<li><a href="http://www.mysql.com/downloads/index.html">MySQL AB</a></li>
</ul>
</li>
<li>MySQLNet can be gotten from <a href="http://sourceforge.net/projects/mysqlnet/">here</a> and the
binary assembly ByteFX.Data.dll needs to be installed
in the same place as the mono class libraries.</li>
<li>MySQLNet requires <a href="http://www.icsharpcode.net/OpenSource/SharpZipLib/default.asp">SharpZipLib</a> which is
a Zip Library written in 100% C#. This is used for compression/decompression of data
sent/received over the network. The SharpZipLib binary assembly SharpZipLib.dll should
be installed in the same place as the mono class libraries.</li>
<li>Has a ConnectionString format:
<pre>
"Server=hostname;" +
"Database=database;" +
"User ID=username;" +
"Password=password"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using ByteFX.Data.MySQLClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Server=localhost;" +
"Database=test;" +
"User ID=mysql;" +
"Password=;";
IDbConnection dbcon;
dbcon = new MySQLConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.ConnectionString = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r ByteFX.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r ByteFX.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+175
View File
@@ -0,0 +1,175 @@
* ODBC Data Provider
<ul>
<li>Exists in namespace System.Data.Odbc and assembly System.Data
<li>Works on Windows and Linux. Should have no problems working on UNIX too.
<li>Works on Windows via the native Windows odbc32.dll
<li>Works on Linux via:
<ul>
<li><a href="http://www.unixodbc.org/">unixODBC</a> which has
commercial support
from <a href="http://www.easysoft.com/">Easysoft</a></li>
<li><a href="http://www.iodbc.org/">iODBC</a> which has
a commercial support
from <a href="http://oplweb.openlinksw.com:8080/download/">OpenLink Software</a></li>
</ul>
<li>List of unixODBC <a href="http://www.unixodbc.org/drivers.html">drivers</a>
<li>List of <a href="http://ourworld.compuserve.com/homepages/Ken_North/odbcvend.htm">ODBC Vendors</a>
<li>ODBC can connect to various databases which has an ODBC driver installed:
<ul>
<li><a href="http://www.mysql.com/">MySQL</a>
<li><a href="http://www.postgresql.org/">PostgreSQL</a>
<li><a href="http://www.oracle.com/">Oracle</a>
<li><a href="http://www.borland.com/products/downloads/download_interbase.html">Interbase</a>
<li><a href="http://www.sybase.com/downloads">Sybase</a> and
<li><a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a> (
via <a href="http://www.freetds.org/">FreeTDS</a> on UNIX)
<li><a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a>
<li><a href="http://www.microsoft.com/office/access/default.asp">MS Access</a>
(via <a href="http://mdbtools.sourceforge.net/">MDB Tools</a> on UNIX)
</ul>
<li>ODBC Provider created by Brian Ritchie.</li>
<li>Does not support trusted connections</li>
</ul>
** Current Status
<ul>
<li>Can Connect on:
<ul>
<li>Windows via native Windows odbc32.dll</a></li>
<li>Linux via:
<ul>
<li>unixODBC's libodbc.so</li>
<li>iODBC's libiodbc.so</li>
</ul>
</li>
</ul>
</li>
<li>Various databases have been tested using their
ODBC drivers: MySQL, PostgreSQL, Oracle, IBM DB2, and Microsoft SQL Server</li>
<li>Can execute non-query commands via ExecuteNonQuery of a OdbcCommand</li>
<li>Can execute aggreates and retrieve a single row single column result via
ExecuteScalar of a OdbcCommand</li>
<li>Can execute queries via ExecuteReader of a OdbcCommand and
retrieve results using an OdbcDataReader</li>
<li>Can get a DataTable containing schema info via GetSchemaTable() in a OdbcDataReader</li>
<li>Can Fill a DataTable in a DataSet via an OdbcDataAdapter</li>
</ul>
** Action Plan
<ul>
<li>Fixing bugs
<li>Testing with other setups
</ul>
** Testing ODBC provider
<p>Test Mono's ODBC provider System.Data.Odbc with the MySQL ODBC driver MyODBC
<p><ul>
<li>Take a look at OdbcTest.cs in mcs/class/System.Data/Test</li>
<li>Here is a ConnectionString format if you have a DSN setup:
<pre>
"DSN=dataSetName;UID=username;PWD=password"
</pre>
</li>
<li>Here is a ConnectionString format if you do not have DSN (have not
gotten this to work):
<pre>
"DRIVER={SQL Server};SERVER=(local);UID=sa;PWD=;DATABASE=pubs"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using System.Data.Odbc;
public class Test
{
public static void Main(string[] args)
{
// have an ODBC DSN setup named MYSQLDSN
// that accesses a MySQL database via
// MyODBC driver for ODBC with a
// hostname of localhost and database test
string connectionString =
"DSN=MYSQLDSN;" +
"UID=mysql;" +
"PWD=;";
IDbConnection dbcon;
dbcon = new OdbcConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.ConnectionString = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+142
View File
@@ -0,0 +1,142 @@
* OLE DB Provider
<ul>
<li> Provides a OleDb-like provider for Mono
using <a href="http://www.gnome-db.org/">GDA</a> as the data access layer.</li>
<li> Exists in namespace System.Data.OleDb and assembly System.Data</li>
<li>Created by Rodrigo Moya</li>
<li>LibGDA has providers for:</li>
<ul>
<li><a href="http://www.mysql.com/">MySQL</a></li>
<li><a href="http://www.postgresql.org/">PostgreSQL</a></li>
<li>XML</li>
<li>ODBC (via <a href="http://www.unixodbc.org/">unixODBC</a>)</li>
<li><a href="http://www.oracle.com/">Oracle</a></li>
<li><a href="http://www.borland.com/products/downloads/download_interbase.html">Interbase</a></li>
<li><a href="http://www.sybase.com/downloads">Sybase</a> and
<a href="http://www.microsoft.com/sql/default.asp">Microsoft SQL Server</a> (
via <a href="http://www.freetds.org/">FreeTDS</a>)</li>
<li><a href="http://www-3.ibm.com/software/data/db2/">IBM DB2 Universal Database</a></li>
<li><a href="http://www.hwaci.com/sw/sqlite/download.html">SQL Lite</a></li>
<li><a href="http://www.microsoft.com/office/access/default.asp">MS Access</a></li>
(via <a href="http://mdbtools.sourceforge.net/">MDB Tools</a>)</li>
</ul>
</li>
<li>Does not support trusted connections</li>
</ul>
** Current Status
<ul>
<li>The OleDb provider is working with libgda (an OLE-DB/ADO data access for Unix).
The C-Sharp bindings to libgda currently work - meaning they can compile, run,
and you can connect to a
PostgreSQL database via libgda via the C-Sharp bindings to libgda.</li>
<li>Basic
functionality (execution of commands, data retrieval, transactions, etc) are
now working.</li>
<li>An inital implementation of GetSchemaTable() for
the OleDbDataReader has been checked into cvs. GetSchemaTable() isn't correct for OleDb,
but the foundation is there.</li>
</ul>
** Action Plan
<ul>
<li>Current focus is on filling up the missing pieces (Data adapters
mainly) and schema support.</li>
<li>We need help building libgda on Windows though. libgda
builds find on linux though.</li>
<li>Need to make the OleDb provider compatible with the OleDb provider in Microsoft .NET</li>
</ul>
** Testing OleDb with libgda's PostgreSQL provider
<ul>
<li>Requires a working mono and mcs</li>
<li>Requires Linux because the OleDb provider uses libgda and libgda only
works on Linux.</li>
<li>Connection String format: "Provider=providerName;...". providerName is the
name of the Provider you use, such as, PostgreSQL, MySQL, etc. The elipsis ...
means that the connection parameters are dependent upon the provider being used and
are passed to libgda for connecting. Such paramters, can be: Database, User ID, Password,
Server, etc...</li>
<li>See the test TestOleDb.cs found at mcs/class/System.Data/System.Data.OleDb</li>
<li>C# Example for Mono's System.Data.OleDb:
<pre>
using System;
using System.Data;
using System.Data.OleDb;
public class Test
{
public static void Main(string[] args)
{
// there is a libgda PostgreSQL provider
string connectionString =
"Provider=PostgreSQL;" +
"Addr=127.0.0.1;" +
"Database=rodrigo";
IDbConnection dbcon;
dbcon = new OleDbConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
// requires a table to be created named employee
// with columns firstname and lastname
// such as,
// CREATE TABLE employee (
// firstname varchar(32),
// lastname varchar(32));
string sql =
"SELECT firstname, lastname " +
"FROM employee";
dbcmd.ConnectionString = sql;
IDataReader reader = dbcmd.ExecuteReader();
while(reader.Read()) {
string FirstName = reader["firstname"];
string LastName = reader["lastname"];
Console.WriteLine("Name: " +
FirstName + " " + LastName);
}
// clean up
reader.Close();
reader = null;
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Executable
+146
View File
@@ -0,0 +1,146 @@
* Oracle Data Provider
<ul>
<li>Exists in namespace System.Data.OracleClient and assembly System.Data.OracleClient</li>
<li>Works on Windows</li>
<li>Works with Oracle 8i</li>
<li>More information about Oracle can be found at <a href="http://www.oracle.com/"/>here</a></li>
<li>Created by Daniel Morgan.</li>
<li>Does not support trusted connections</li>
</ul>
** Current Status
<ul>
<li>OracleConnection can connect to an Oracle 8i database on
Windows via oci.dll</li>
<li>The native glue library only has makefiles for Borland C++ and
Microsoft Visual C++ command line compilers. Only the makefile for
Microsoft Visual C++ command-line compiler has been tested.</li>
<li>Can execute simple DML SQL statements, such as,
INSERT a row into the EMP table via the OracleCommand's ExecuteNonQuery method</li>
<li>The System.Data.OracleClient.dll assembly can be built with mcs/mono via
the makefile.gnu for System.Data.OracleClient or csc/.net via the
System.Data.OracleClient.build nant build file. There is also a Visual Studio.NET
solution it too.
</ul>
** Action Plan
<ul>
<li>Get the makefile for the Borland C++ compiler to work
since the <a href="http://www.borland.com/">Borland</a> C++ compiler is
a free download</li>
<li>Get the native glue lib System.Data.OracleClient.ocigule.dll to be built
using gcc on Linux. This would require that Oracle 8i client software be installed
on Linux with the oci headers and shared libraries</li>
<li>Be able to retrieve results via a data reader</li>
<li>Parameters support</li>
<li>Stored Procedures, Functions, and Packages support</li>
<li>Be able to fill a DataTable in a DataSet via a data adapter</li>
<li>Support for Oracle 9i</li>
<li>Figure out how to move the unmanaged OCI handling code in
the oci glue C library to the managed C# assembly. I have been unable
to successfully connect to an Oracle 8i database by using Platform Invoke and
Marshalling in C# to the oci shared library (oci.dll on Windows)</li>
</ul>
** Testing Mono.Data.OracleClient
<ul>
<li>Have a working mono and mcs</li>
<li>Have access to an Oracle 8i database or download it from
<a href="http://www.oracle.com/">Oracle</a>. Registration to the
Oracle Technology Network is free. If installing on Linux, I suggest you
do a lot of searching to see how others installed Oracle on Linux.</li>
<li>Make sure Mono.Data.OracleClient.dll assembly is built, if not, go
into Mono.Data.OracleClient and do a make -f makefile.gnu (on Linux) or
../../nant/NAnt.exe (on Cygwin).</li>
<li>The OCI Glue Library Mono.Data.OracleClient.ociglue.dll will need to be
created as well. Has only been tested with lc (Microsoft Visual C++ command-line compiler).
There is a make file for Microsoft C++ and Borland C++. I'm sure it wouldn't be hard
to create a makefile for gcc if installing on Linux.</li>
<li>Take a look at TestOracleClient.cs found at mcs/class/System.Data.OracleClient/Test</li>
<li>Has a connection string format:
<pre>
"Data Source=tnsname;User ID=userid;Password=password"
</pre>
</li>
<li>C# Example:
<pre>
using System;
using System.Data;
using System.Data.OracleClient;
public class Test
{
public static void Main(string[] args)
{
string connectionString =
"Data Source=testdb;" +
"User ID=scott;" +
"Password=tiger;";
IDbConnection dbcon;
dbcon = new OracleConnection(connectionString);
IDbCommand dbcmd = dbcon.CreateCommand();
string sql =
"insert into scott.emp " +
"(empno, ename, job, sal, deptno) " +
"values(123," +
"'Don Smith'," +
"'Cook'," +
"23021," +
"20)";
dbcmd.ConnectionString = sql;
dbcmd.ExecuteNonQuery();
dbcmd.Dispose();
dbcmd = null;
dbcon.Close();
dbcon = null;
}
}
</pre>
</li>
<li>Building C# Example:
<ul>
<li>Save the example to a file, such as, TestExample.cs</li>
<li>Build on Linux:
<pre>
mcs TestExample.cs -r System.Data.dll \
-r System.Data.OracleClient.dll
</pre>
</li>
<li>Build on Windows via Cygwin:
<pre>
mono C:/cygwin/home/MyHome/mono/install/bin/mcs.exe \
TestExample.cs \
-lib:C:/cygwin/home/MyHome/mono/install/lib \
-r System.Data.dll -r System.Data.OracleClient.dll
</pre>
</li>
</ul>
</li>
<li>Running the Example:
<pre>
mono TestExample.exe
</pre>
</li>
</ul>
Loaded 100 of 39263 files, more files were not shown because too many files have changed in this diff. Show more