RetroArch/ssnes.cfg

##### Config file for SSNES

## If enabled, load libsnes from a dynamic location.
# libsnes_path = "/path/to/libsnes.so"

#### Video

# Windowed xscale and yscale (Real x res: 296 * xscale, real y scale: 224 * xscale)
# video_xscale = 3.0
# video_yscale = 3.0

# Fullscreen resolution. Resolution of 0 uses the resolution of the desktop.
# video_fullscreen_x = 0
# video_fullscreen_y = 0

# Start in fullscreen. Can be changed at runtime.
# video_fullscreen = false

# Force 16-bit colors. Apparently some video cards in use today have troubles with 32-bit ...
# video_force_16bit = false

# Video vsync.
# video_vsync = true

# Smoothens picture with bilinear filtering. Should be disabled if using pixel shaders.
# video_smooth = true

# Forces rendering area to stay equal to SNES aspect ratio 4:3 or as defined in video_aspect_ratio.
# video_force_aspect = true

# A floating point value for video aspect ratio (width / height)
# video_aspect_ratio = 1.333

# Path to Cg shader.
# video_cg_shader = "/path/to/cg/shader.cg"

# Path to bSNES XML shader (GLSL only). If both Cg shader path and XML shader path are defined, 
# Cg shader will take priority unless overridden in video_shader_type.
# video_bsnes_shader = "/path/to/bsnes/xml/shader.shader"

# Which shader type to use. Valid values are "cg", "bsnes", "none" and "auto"
# video_shader_type = auto

# Defines a directory where XML shaders are kept.
# video_shader_dir =

# Render to texture first. Useful when doing multi-pass shaders or control the output of shaders better.
# video_render_to_texture = false

# Defines the video scale of render-to-texture. 
# The output FBO size is scaled by these amounts against the input size (typically 256 * 224 for SNES).
# video_fbo_scale_x = 2.0
# video_fbo_scale_y = 2.0

# Define shader to use for second pass (needs render-to-texture).
# video_second_pass_shader = "/path/to/second/shader.{cg,shader}"

# Defines if bilinear filtering is used during second pass (needs render-to-texture).
# video_second_pass_smooth = true

# CPU-based filter. Path to a bSNES CPU filter (*.filter)
# video_filter =

# Path to a TTF font used for rendering messages. This path must be defined to enable fonts.
# Do note that the _full_ path of the font is necessary!
# video_font_path = 

# Size of the TTF font rendered.
# video_font_size = 48

# Offset for where messages will be placed on screen. Values are in range 0.0 to 1.0 for both x and y values. 
# [0.0, 0.0] maps to the lower left corner of the screen.
# video_message_pos_x = 0.05
# video_message_pox_y = 0.05

#### Audio

# Enable audio.
# audio_enable = true

# Audio output samplerate.
# audio_out_rate = 48000

# Audio input samplerate from libsnes.
# Lower this (slightly) if you are experiencing frequent audio dropouts while vsync is enabled.
# Conversely, increase this slightly if you are experiencing good audio, 
# but lots of dropped frames. Reasonable values for this is 32000 +/- 100 Hz.
# audio_in_rate = 31980

# When altering audio_in_rate on-the-fly, define by how much each time.
# audio_rate_step = 0.25

# Audio driver backend. Depending on configuration possible candidates are: alsa, pulse, oss, jack, rsound, roar, openal, sdl and xaudio
# audio_driver =

# Override the default audio device the audio_driver uses. This is driver dependant. E.g. ALSA wants a PCM device, OSS wants a path (e.g. /dev/dsp), Jack wants portnames (e.g. system:playback1,system:playback_2), and so on ...
# audio_device =

# Will sync (block) on audio. Recommended.
# audio_sync = true

# Desired audio latency in milliseconds. Might not be honored if driver can't provide given latency.
# audio_latency = 64

# libsamplerate quality. Valid values are from 1 to 5. These values map to zero_order_hold, linear, sinc_fastest, sinc_medium and sinc_best respectively.
# audio_src_quality =

### Input

# Input driver. Depending on video driver, it might force a different input driver.
# input_driver = sdl

# Defines axis threshold. Possible values are [0.0, 1.0]
# input_axis_threshold = 0.5

# Keyboard input. Will recognize normal keypresses and special keys like "left", "right", and so on.
# Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely, 
# rather than relying on a default.
# input_player1_a = x
# input_player1_b = z
# input_player1_y = a
# input_player1_x = s
# input_player1_start = enter
# input_player1_select = rshift
# input_player1_l = q
# input_player1_r = w
# input_player1_left = left
# input_player1_right = right
# input_player1_up = up
# input_player1_down = down

# If desired, it is possible to override which joypads are being used for player 1 through 5. First joypad available is 0.
# input_player1_joypad_index = 0
# input_player2_joypad_index = 1
# input_player3_joypad_index = 2
# input_player4_joypad_index = 3
# input_player5_joypad_index = 4

# Joypad buttons. Figure these out by looking at jstest /dev/input/js0 output, or use ssnes-joyconfig.
# You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction. 
# E.g. "h0up"
# input_player1_a_btn = 1
# input_player1_b_btn = 0
# input_player1_y_btn = 2
# input_player1_x_btn = 3
# input_player1_start_btn = 7
# input_player1_select_btn = 6
# input_player1_l_btn = 4
# input_player1_r_btn = 5
# input_player1_left_btn = 11
# input_player1_right_btn = 12
# input_player1_up_btn = 13
# input_player1_down_btn = 14

# Axis for SNES DPAD. 
# Needs to be either '+' or '-' in the first character signaling either positive or negative direction of the axis, then the axis number. 
# Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.
# input_player1_left_axis = -0
# input_player1_right_axis = +0
# input_player1_up_axis = +1
# input_player1_down_axis = -1

# Same stuff, just for player two.
# input_player2_a = 
# input_player2_b =
# input_player2_y =
# input_player2_x =
# input_player2_start =
# input_player2_select =
# input_player2_l =
# input_player2_r =
# input_player2_left =
# input_player2_right =
# input_player2_up =
# input_player2_down =

# input_player2_a_btn = 1
# input_player2_b_btn = 0
# input_player2_y_btn = 2
# input_player2_x_btn = 3
# input_player2_start_btn = 7
# input_player2_select_btn = 6
# input_player2_l_btn = 4
# input_player2_r_btn = 5
# input_player2_left_btn = 11
# input_player2_right_btn = 12
# input_player2_up_btn = 13
# input_player2_down_btn = 14


# input_player2_left_axis = -0
# input_player2_right_axis = +0
# input_player2_up_axis = -1
# input_player2_down_axis = +1

# This goes all the way to player 5, but again omitted for clarity.

# Toggles fullscreen.
# input_toggle_fullscreen = f
# Saves state.
# input_save_state = f2
# Loads state.
# input_load_state = f4

# State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).
# When slot is != 0, path will be $path%d, where %d is slot number.
# input_state_slot_increase = f7
# input_state_slot_decrease = f6

# Toggles between fast-forwarding and normal speed.
# input_toggle_fast_forward = space

# Key to exit emulator cleanly. 
# Killing it in any hard way (SIGTERM, SIGKILL, etc, will terminate emulator without saving RAM, etc.)
# input_exit_emulator = escape

# Decrease/increase input sample rate on the fly. Amount to decrease/increase is defined by audio_rate_step.
# input_rate_step_up = kp_plus
# input_rate_step_down = kp_minus

# Applies next and previous XML shader in directory.
# input_shader_next = m
# input_shader_prev = n

# Enable rewinding. This will take a performance hit when playing, so it is disabled by default.
# Do note that rewinding will only work properly when using bSNES libsnes core atm.
# rewind_enable = false

# Rewinding buffer size in megabytes. Bigger rewinding buffer means you can rewind longer.
# The buffer should be approx. 20MB per minute of buffer time.
# rewind_buffer_size = 20

# Rewind granularity. When rewinding defined number of frames, you can rewind several frames at a time, increasing the rewinding speed.
# rewind_granularity = 1

# Hold button down to rewind. Rewinding must be enabled.
# input_rewind = r

# Toggle between recording and not.
# input_movie_record_toggle = o

# Toggle between paused and non-paused state
# input_pause_toggle = p

# Reset the emulated SNES.
# input_reset = h

# Pause gameplay when window focus is lost.
# pause_nonactive = true

# Autosaves the non-volatile SRAM at a regular interval. This is disabled by default unless set otherwise.
# The interval is measured in seconds. A value of 0 disables autosave.
# autosave_interval =

# When being client over netplay, use keybinds for player 1.
# netplay_client_swap_input = false


# Path to XML cheat database (as used by bSNES).
# cheat_database_path =

# Cheats.
# input_cheat_index_plus = y
# input_cheat_index_minus = t
# input_cheat_toggle = u