This patch fixes a bug in the context management code that causes it to
ignore the HANDLE_EA_EL3_FIRST compile-time option and instead always
configure SCR_EL3 to force all external aborts to trap into EL3. The
code used #ifdef to read compile-time option declared with add_define in
the Makefile... however, those options are always defined, they're just
defined to either 0 or 1, so #if is the correct syntax to check for
them. Also update the documentation to match.
This bug has existed since the Nov 2017 commit 76454abf4 (AArch64:
Introduce External Abort handling), which changed the
HANDLE_EA_EL3_FIRST option to use add_define.
Change-Id: I7189f41d0daee78fa2fcf4066323e663e1e04d3d
Signed-off-by: Julius Werner <jwerner@chromium.org>
The initial implementation was corrupting registers that it shouldn't.
Now this is fixed.
Change-Id: Iaa407c18e668b2d9381391bf10d6876fe936aded
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
armclang replaces calls to printf by calls to one of the symbols
__0printf, __1printf or __2printf. This patch adds new functions with
these names that internally call printf so that the Trusted Firmware can
be compiled with this compiler.
Change-Id: I06a0e3e5001232fe5b2577615666ddd66e81eef0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
tf_printf and tf_snprintf are now called printf and snprintf, so the
code needs to be updated.
Change-Id: Iffeee97afcd6328c4c2d30830d4923b964682d71
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Change their names to printf and snprintf. They are much smaller than
the previous versions we had, which makes them better suited for the
Trusted Firmware.
Change-Id: Ia872af91b7b967c47fce012eccecede7873a3daf
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Remove code specific to FreeBSD so that they can be used in this
repository.
Change-Id: I5c11eb5b3c05a7fb91aed08371a1f7a0e6122a94
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The existing files had some style problems that this patch fixes.
Change-Id: I794e0d96e52f8da0ffa0d70a41f36c4432b4e563
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
They are too big for the Trusted Firmware, and it can be confusing to
have two versions of the same functions with different names. tf_printf
and tf_snprintf will replace them in the next patch.
Change-Id: I978414ac169cc3156e249549ef101a70eb31a295
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
sscanf() is unused and it doesn't work, so it doesn't make sense to
keep it.
timingsafe_bcmp() isn't used anywhere.
Change-Id: Ib5d28ff21d0f3ccc36c5c0fb5474b3384105cf80
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Remove all files that don't have only Arm copyright. This is the first
step to cleanup the C library in this repository. They will be re-added
in the following patches.
Change-Id: I72c40a1620d1df3228fc397ec695d569a20245fd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
These changes address most of the required MISRA rules. In the process,
some from generic code is also fixed.
No functional changes.
Change-Id: I76cacf6e1d73b09510561b5090c2bb66d81bec88
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Memory Partitioning And Monitoring is an Armv8.4 feature that enables
various memory system components and resources to define partitions.
Software running at various ELs can then assign themselves to the
desired partition to control their performance aspects.
With this patch, when ENABLE_MPAM_FOR_LOWER_ELS is set to 1, EL3 allows
lower ELs to access their own MPAM registers without trapping to EL3.
This patch however doesn't make use of partitioning in EL3; platform
initialisation code should configure and use partitions in EL3 if
required.
Change-Id: I5a55b6771ccaa0c1cffc05543d2116b60cbbcdcd
Co-authored-by: James Morse <james.morse@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch uses the 'declare_cpu_ops_wa' macro, to set the check function,
to report that Denver cores are mitigated.
Denver cores are vulnerable to this anomaly and require the mitigation to
be enabled always.
Change-Id: I1bb6eefdec8c01fb8b645e112f8d04d4bb8811ef
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
If the system is in near idle conditions, this erratum could cause a
deadlock or data corruption. This patch applies the workaround that
prevents this.
This DSU erratum affects only the DSUs that contain the ACP interface
and it was fixed in r2p0. The workaround is applied only to the DSUs
that are actually affected.
Link to respective Arm documentation:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.epm138168/index.html
Change-Id: I033213b3077685130fc1e3f4f79c4d15d7483ec9
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
The translation library is useful elsewhere. Even though this repository
doesn't exercise the EL2 support of the library, it is better to have it
here as well to make it easier to maintain.
enable_mmu_secure() and enable_mmu_direct() have been deprecated. The
functions are still present, but they are behind ERROR_DEPRECATED and
they call the new functions enable_mmu_svc_mon() and
enable_mmu_direct_svc_mon().
Change-Id: I13ad10cd048d9cc2d55e0fff9a5133671b67dcba
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
During cold boot, the initial translation tables are created with data
caches disabled, so all modifications go to memory directly. After the
MMU is enabled and data cache is enabled, any modification to the tables
goes to data cache, and eventually may get flushed to memory.
If CPU0 modifies the tables while CPU1 is off, CPU0 will have the
modified tables in its data cache. When CPU1 is powered on, the MMU is
enabled, then it enables coherency, and then it enables the data cache.
Until this is done, CPU1 isn't in coherency, and the translation tables
it sees can be outdated if CPU0 still has some modified entries in its
data cache.
This can be a problem in some cases. For example, the warm boot code
uses only the tables mapped during cold boot, which don't normally
change. However, if they are modified (and a RO page is made RW, or a XN
page is made executable) the CPU will see the old attributes and crash
when it tries to access it.
This doesn't happen in systems with HW_ASSISTED_COHERENCY or
WARMBOOT_ENABLE_DCACHE_EARLY. In these systems, the data cache is
enabled at the same time as the MMU. As soon as this happens, the CPU is
in coherency.
There was an attempt of a fix in psci_helpers.S, but it didn't solve the
problem. That code has been deleted. The code was introduced in commit
<264410306381> ("Invalidate TLB entries during warm boot").
Now, during a map or unmap operation, the memory associated to each
modified table is flushed. Traversing a table will also flush it's
memory, as there is no way to tell in the current implementation if the
table that has been traversed has also been modified.
Change-Id: I4b520bca27502f1018878061bc5fb82af740bb92
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Changed the names for consistency with the rest of the library. Introduced
new helpers that manipulate the active translation tables context.
Change-Id: Icaca56b67fcf6a96e88aa3c7e47411162e8e6856
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..
Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
We had exit but we didn't have atexit, and we were calling panic and
tf_printf from exit, which generated a dependency from exit to them.
Having atexit allows to set a different function pointer in every image.
Change-Id: I95b9556d680d96249ed3b14da159b6f417da7661
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF Makefile was linking all the objects files generated for the
c library instead of creating a static library that could be
used in the linking stage.
Change-Id: I721daea097e9b13cbb42c9f8eaa2af8fea0799cf
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF Makefile was linking all the objects files generated for the
fdt library instead of creating a static library that could be
used in the linking stage.
Change-Id: If3705bba188ec39e1fbf2322a7f2a9a941e1b90d
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
If either USE_COHERENT_MEM or HW_ASSISTED_COHERENCY being true
should cause us to not enter the ifdef block, then the logic
is not correct here. Posibly bad use of De Morgan's law?
Fix this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Add a null pointer check for the error record probe
function -- avoids a panic in case a platform has not defined it.
Change-Id: I1139fa0df33297a12ec16615cacd07540925f991
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
This library can be used in other projects. All comments that talk about
the Trusted Firmware should be talking about the library itself.
Change-Id: I3b98d42f7132be72c1f8a4900acfaa78dbd2daa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This allows other parts of the code to reuse it. No functional changes.
Change-Id: Ib052ae235c422d9179958bd3016c3e678779ae9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Most registers are 64-bit wide, even in AArch32 mode:
- MAIR_ELx is equivalent to MAIR0 and MAIR1.
- TTBR is 64 bit in both AArch64 and AArch32.
The only difference is the TCR register, which is 32 bit in AArch32 and
in EL3 in AArch64. For consistency with the rest of ELs in AArch64, it
makes sense to also have it as a 64-bit value.
Change-Id: I2274d66a28876702e7085df5f8aad0e7ec139da9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The Exception Level is now detected at runtime. This means that it is not
needed to hardcode the EL used by each image.
This doesn't result in a substantial increase of the image size because
the initialization functions that aren't used are garbage-collected by
the linker.
In AArch32 the current EL has been changed from EL3 to EL1 because the
the AArch32 PL1&0 translation regime behaves more like the AArch64 EL1&0
translation regime than the EL3 one.
Change-Id: I941404299ebe7666ca17619207c923b49a55cb73
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
xlat_arch_tlbi_va_regime() isn't used, so it has been renamed to
xlat_arch_tlbi_va() and the previous implementation has been removed.
Change-Id: Ic118bed3fb68234748d86b2e9e95b25650289276
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
They only contained one function that is easily integrated in the private
library header and the existing architectural C files.
This also helps making the library more portable, as the Makefile of the
library now doesn't use the variable INCLUDES, which is specific to this
codebase and doesn't respect the namespace of the library.
Change-Id: I22228e6a97e9b4f346f5cd8947609263e8df71d8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
