FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-29 13:00:35 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
68bbbd7912
linux/drivers/media/platform/ti-vpe/sc.h

209 lines
5.9 KiB
C
Raw Normal View History

[media] v4l: ti-vpe: create a scaler block library VPE and VIP IPs in DAR7x contain a scaler(SC) sub block. Create a library which will perform scaler block related configurations and hold SC register definitions. The functions provided by this library will be called by the vpe and vip drivers using a sc_data handle. The vpe_dev holds the sc_data handle. The handle represents an instance of the SC hardware, and the vpe driver uses it to access the scaler register offsets or helper functions to configure these registers. We move the SC register definitions to sc.h so that they aren't specific to VPE anymore. The register offsets are now relative to the sub-block, and not the VPE IP as a whole. In order for VPDMA to configure registers, it requires it's offset from the top level VPE module. A macro called GET_OFFSET_TOP is added to return the offset of the register relative to the VPE IP. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:57 +00:00
/*
* Copyright (c) 2013 Texas Instruments Inc.
*
* David Griego, <dagriego@biglakesoftware.com>
* Dale Farnsworth, <dale@farnsworth.org>
* Archit Taneja, <archit@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef TI_SC_H
#define TI_SC_H
/* Scaler regs */
#define CFG_SC0 0x0
#define CFG_INTERLACE_O (1 << 0)
#define CFG_LINEAR (1 << 1)
#define CFG_SC_BYPASS (1 << 2)
#define CFG_INVT_FID (1 << 3)
#define CFG_USE_RAV (1 << 4)
#define CFG_ENABLE_EV (1 << 5)
#define CFG_AUTO_HS (1 << 6)
#define CFG_DCM_2X (1 << 7)
#define CFG_DCM_4X (1 << 8)
#define CFG_HP_BYPASS (1 << 9)
#define CFG_INTERLACE_I (1 << 10)
#define CFG_ENABLE_SIN2_VER_INTP (1 << 11)
#define CFG_Y_PK_EN (1 << 14)
#define CFG_TRIM (1 << 15)
#define CFG_SELFGEN_FID (1 << 16)
#define CFG_SC1 0x4
#define CFG_ROW_ACC_INC_MASK 0x07ffffff
#define CFG_ROW_ACC_INC_SHIFT 0
#define CFG_SC2 0x08
#define CFG_ROW_ACC_OFFSET_MASK 0x0fffffff
#define CFG_ROW_ACC_OFFSET_SHIFT 0
#define CFG_SC3 0x0c
#define CFG_ROW_ACC_OFFSET_B_MASK 0x0fffffff
#define CFG_ROW_ACC_OFFSET_B_SHIFT 0
#define CFG_SC4 0x10
#define CFG_TAR_H_MASK 0x07ff
#define CFG_TAR_H_SHIFT 0
#define CFG_TAR_W_MASK 0x07ff
#define CFG_TAR_W_SHIFT 12
#define CFG_LIN_ACC_INC_U_MASK 0x07
#define CFG_LIN_ACC_INC_U_SHIFT 24
#define CFG_NLIN_ACC_INIT_U_MASK 0x07
#define CFG_NLIN_ACC_INIT_U_SHIFT 28
#define CFG_SC5 0x14
#define CFG_SRC_H_MASK 0x07ff
#define CFG_SRC_H_SHIFT 0
#define CFG_SRC_W_MASK 0x07ff
#define CFG_SRC_W_SHIFT 12
#define CFG_NLIN_ACC_INC_U_MASK 0x07
#define CFG_NLIN_ACC_INC_U_SHIFT 24
#define CFG_SC6 0x18
#define CFG_ROW_ACC_INIT_RAV_MASK 0x03ff
#define CFG_ROW_ACC_INIT_RAV_SHIFT 0
#define CFG_ROW_ACC_INIT_RAV_B_MASK 0x03ff
#define CFG_ROW_ACC_INIT_RAV_B_SHIFT 10
#define CFG_SC8 0x20
#define CFG_NLIN_LEFT_MASK 0x07ff
#define CFG_NLIN_LEFT_SHIFT 0
#define CFG_NLIN_RIGHT_MASK 0x07ff
#define CFG_NLIN_RIGHT_SHIFT 12
#define CFG_SC9 0x24
#define CFG_LIN_ACC_INC CFG_SC9
#define CFG_SC10 0x28
#define CFG_NLIN_ACC_INIT CFG_SC10
#define CFG_SC11 0x2c
#define CFG_NLIN_ACC_INC CFG_SC11
#define CFG_SC12 0x30
#define CFG_COL_ACC_OFFSET_MASK 0x01ffffff
#define CFG_COL_ACC_OFFSET_SHIFT 0
#define CFG_SC13 0x34
#define CFG_SC_FACTOR_RAV_MASK 0xff
#define CFG_SC_FACTOR_RAV_SHIFT 0
#define CFG_CHROMA_INTP_THR_MASK 0x03ff
#define CFG_CHROMA_INTP_THR_SHIFT 12
#define CFG_DELTA_CHROMA_THR_MASK 0x0f
#define CFG_DELTA_CHROMA_THR_SHIFT 24
#define CFG_SC17 0x44
#define CFG_EV_THR_MASK 0x03ff
#define CFG_EV_THR_SHIFT 12
#define CFG_DELTA_LUMA_THR_MASK 0x0f
#define CFG_DELTA_LUMA_THR_SHIFT 24
#define CFG_DELTA_EV_THR_MASK 0x0f
#define CFG_DELTA_EV_THR_SHIFT 28
#define CFG_SC18 0x48
#define CFG_HS_FACTOR_MASK 0x03ff
#define CFG_HS_FACTOR_SHIFT 0
#define CFG_CONF_DEFAULT_MASK 0x01ff
#define CFG_CONF_DEFAULT_SHIFT 16
#define CFG_SC19 0x4c
#define CFG_HPF_COEFF0_MASK 0xff
#define CFG_HPF_COEFF0_SHIFT 0
#define CFG_HPF_COEFF1_MASK 0xff
#define CFG_HPF_COEFF1_SHIFT 8
#define CFG_HPF_COEFF2_MASK 0xff
#define CFG_HPF_COEFF2_SHIFT 16
#define CFG_HPF_COEFF3_MASK 0xff
#define CFG_HPF_COEFF3_SHIFT 23
#define CFG_SC20 0x50
#define CFG_HPF_COEFF4_MASK 0xff
#define CFG_HPF_COEFF4_SHIFT 0
#define CFG_HPF_COEFF5_MASK 0xff
#define CFG_HPF_COEFF5_SHIFT 8
#define CFG_HPF_NORM_SHIFT_MASK 0x07
#define CFG_HPF_NORM_SHIFT_SHIFT 16
#define CFG_NL_LIMIT_MASK 0x1ff
#define CFG_NL_LIMIT_SHIFT 20
#define CFG_SC21 0x54
#define CFG_NL_LO_THR_MASK 0x01ff
#define CFG_NL_LO_THR_SHIFT 0
#define CFG_NL_LO_SLOPE_MASK 0xff
#define CFG_NL_LO_SLOPE_SHIFT 16
#define CFG_SC22 0x58
#define CFG_NL_HI_THR_MASK 0x01ff
#define CFG_NL_HI_THR_SHIFT 0
#define CFG_NL_HI_SLOPE_SH_MASK 0x07
#define CFG_NL_HI_SLOPE_SH_SHIFT 16
#define CFG_SC23 0x5c
#define CFG_GRADIENT_THR_MASK 0x07ff
#define CFG_GRADIENT_THR_SHIFT 0
#define CFG_GRADIENT_THR_RANGE_MASK 0x0f
#define CFG_GRADIENT_THR_RANGE_SHIFT 12
#define CFG_MIN_GY_THR_MASK 0xff
#define CFG_MIN_GY_THR_SHIFT 16
#define CFG_MIN_GY_THR_RANGE_MASK 0x0f
#define CFG_MIN_GY_THR_RANGE_SHIFT 28
#define CFG_SC24 0x60
#define CFG_ORG_H_MASK 0x07ff
#define CFG_ORG_H_SHIFT 0
#define CFG_ORG_W_MASK 0x07ff
#define CFG_ORG_W_SHIFT 16
#define CFG_SC25 0x64
#define CFG_OFF_H_MASK 0x07ff
#define CFG_OFF_H_SHIFT 0
#define CFG_OFF_W_MASK 0x07ff
#define CFG_OFF_W_SHIFT 16
[media] v4l: ti-vpe: support loading of scaler coefficients The SC block in VPE/VIP contains a SRAM within it. This internal memory requires to be loaded with appropriate scaler coefficients from a contiguous block of memory through VPDMA. The horizontal and vertical scaler each require 2 sets of scaler coefficients for luma and chroma scaling. The horizontal polyphase scaler requires coefficients for a 32 phase and 8 tap filter. Similarly, the vertical scaler requires coefficients for a 5 tap filter. The choice of the scaler coefficients depends on the scaling ratio. Add coefficient tables for different scaling ratios in sc_coeffs.h. In the case of horizontal downscaling, we need to consider the change in ratio caused by decimation performed by the horizontal scaler. In order to load the scaler coefficients via VPDMA, a configuration descriptor is used in block mode. The payload for the descriptor is the scaler coefficients copied to memory. Coefficients for each phase have to be placed in memory in a particular order understood by the scaler hardware. The choice of the scaler coefficients, and the loading of the coefficients from our tables to a contiguous buffer is managed by the functions sc_set_hs_coefficients and sc_set_vs_coefficients. The sc_data handle is now added with some parameters to describe the state of the coefficients loaded in the SC block. 'loaded_coeff_h' and 'loaded_coeff_v' hold the address of the last dma buffer which was used by VPDMA to copy coefficients. This information can be used by a vpe mem-to-mem context to decide whether it should load coefficients or not. 'hs_index' and 'vs_index' provide some optimization by preventing loading of coefficients if the scaling ratio didn't change between 2 contexts. 'load_coeff_h' and 'load_coeff_v' tell the vpe/vip driver whether we need to load the coefficients through VPDMA or not. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:58 +00:00
/* number of phases supported by the polyphase scalers */
#define SC_NUM_PHASES 32
/* number of taps used by horizontal polyphase scaler */
#define SC_H_NUM_TAPS 7
/* number of taps used by vertical polyphase scaler */
#define SC_V_NUM_TAPS 5
/* number of taps expected by the scaler in it's coefficient memory */
#define SC_NUM_TAPS_MEM_ALIGN 8
/*
* coefficient memory size in bytes:
* num phases x num sets(luma and chroma) x num taps(aligned) x coeff size
*/
#define SC_COEF_SRAM_SIZE (SC_NUM_PHASES * 2 * SC_NUM_TAPS_MEM_ALIGN * 2)
[media] v4l: ti-vpe: create a scaler block library VPE and VIP IPs in DAR7x contain a scaler(SC) sub block. Create a library which will perform scaler block related configurations and hold SC register definitions. The functions provided by this library will be called by the vpe and vip drivers using a sc_data handle. The vpe_dev holds the sc_data handle. The handle represents an instance of the SC hardware, and the vpe driver uses it to access the scaler register offsets or helper functions to configure these registers. We move the SC register definitions to sc.h so that they aren't specific to VPE anymore. The register offsets are now relative to the sub-block, and not the VPE IP as a whole. In order for VPDMA to configure registers, it requires it's offset from the top level VPE module. A macro called GET_OFFSET_TOP is added to return the offset of the register relative to the VPE IP. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:57 +00:00
struct sc_data {
void __iomem *base;
struct resource *res;
[media] v4l: ti-vpe: support loading of scaler coefficients The SC block in VPE/VIP contains a SRAM within it. This internal memory requires to be loaded with appropriate scaler coefficients from a contiguous block of memory through VPDMA. The horizontal and vertical scaler each require 2 sets of scaler coefficients for luma and chroma scaling. The horizontal polyphase scaler requires coefficients for a 32 phase and 8 tap filter. Similarly, the vertical scaler requires coefficients for a 5 tap filter. The choice of the scaler coefficients depends on the scaling ratio. Add coefficient tables for different scaling ratios in sc_coeffs.h. In the case of horizontal downscaling, we need to consider the change in ratio caused by decimation performed by the horizontal scaler. In order to load the scaler coefficients via VPDMA, a configuration descriptor is used in block mode. The payload for the descriptor is the scaler coefficients copied to memory. Coefficients for each phase have to be placed in memory in a particular order understood by the scaler hardware. The choice of the scaler coefficients, and the loading of the coefficients from our tables to a contiguous buffer is managed by the functions sc_set_hs_coefficients and sc_set_vs_coefficients. The sc_data handle is now added with some parameters to describe the state of the coefficients loaded in the SC block. 'loaded_coeff_h' and 'loaded_coeff_v' hold the address of the last dma buffer which was used by VPDMA to copy coefficients. This information can be used by a vpe mem-to-mem context to decide whether it should load coefficients or not. 'hs_index' and 'vs_index' provide some optimization by preventing loading of coefficients if the scaling ratio didn't change between 2 contexts. 'load_coeff_h' and 'load_coeff_v' tell the vpe/vip driver whether we need to load the coefficients through VPDMA or not. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:58 +00:00
dma_addr_t loaded_coeff_h; /* loaded h coeffs in SC */
dma_addr_t loaded_coeff_v; /* loaded v coeffs in SC */
bool load_coeff_h; /* have new h SC coeffs */
bool load_coeff_v; /* have new v SC coeffs */
unsigned int hs_index; /* h SC coeffs selector */
unsigned int vs_index; /* v SC coeffs selector */
[media] v4l: ti-vpe: create a scaler block library VPE and VIP IPs in DAR7x contain a scaler(SC) sub block. Create a library which will perform scaler block related configurations and hold SC register definitions. The functions provided by this library will be called by the vpe and vip drivers using a sc_data handle. The vpe_dev holds the sc_data handle. The handle represents an instance of the SC hardware, and the vpe driver uses it to access the scaler register offsets or helper functions to configure these registers. We move the SC register definitions to sc.h so that they aren't specific to VPE anymore. The register offsets are now relative to the sub-block, and not the VPE IP as a whole. In order for VPDMA to configure registers, it requires it's offset from the top level VPE module. A macro called GET_OFFSET_TOP is added to return the offset of the register relative to the VPE IP. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:57 +00:00
struct platform_device *pdev;
};
void sc_dump_regs(struct sc_data *sc);
[media] v4l: ti-vpe: support loading of scaler coefficients The SC block in VPE/VIP contains a SRAM within it. This internal memory requires to be loaded with appropriate scaler coefficients from a contiguous block of memory through VPDMA. The horizontal and vertical scaler each require 2 sets of scaler coefficients for luma and chroma scaling. The horizontal polyphase scaler requires coefficients for a 32 phase and 8 tap filter. Similarly, the vertical scaler requires coefficients for a 5 tap filter. The choice of the scaler coefficients depends on the scaling ratio. Add coefficient tables for different scaling ratios in sc_coeffs.h. In the case of horizontal downscaling, we need to consider the change in ratio caused by decimation performed by the horizontal scaler. In order to load the scaler coefficients via VPDMA, a configuration descriptor is used in block mode. The payload for the descriptor is the scaler coefficients copied to memory. Coefficients for each phase have to be placed in memory in a particular order understood by the scaler hardware. The choice of the scaler coefficients, and the loading of the coefficients from our tables to a contiguous buffer is managed by the functions sc_set_hs_coefficients and sc_set_vs_coefficients. The sc_data handle is now added with some parameters to describe the state of the coefficients loaded in the SC block. 'loaded_coeff_h' and 'loaded_coeff_v' hold the address of the last dma buffer which was used by VPDMA to copy coefficients. This information can be used by a vpe mem-to-mem context to decide whether it should load coefficients or not. 'hs_index' and 'vs_index' provide some optimization by preventing loading of coefficients if the scaling ratio didn't change between 2 contexts. 'load_coeff_h' and 'load_coeff_v' tell the vpe/vip driver whether we need to load the coefficients through VPDMA or not. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:58 +00:00
void sc_set_hs_coeffs(struct sc_data *sc, void *addr, unsigned int src_w,
unsigned int dst_w);
void sc_set_vs_coeffs(struct sc_data *sc, void *addr, unsigned int src_h,
unsigned int dst_h);
[media] v4l: ti-vpe: enable basic scaler support Add the required SC register configurations which lets us perform linear scaling for the supported range of horizontal and vertical scaling ratios. The horizontal scaler performs polyphase scaling using it's 8 tap 32 phase filter, decimation is performed when downscaling passes beyond 2x or 4x. The vertical scaler performs polyphase scaling using it's 5 tap 32 phase filter, it switches to a simpler form of scaling using the running average filter when the downscale ratio is more than 4x. Many of the SC features like peaking, trimming and non-linear scaling aren't implemented for now. Only the minimal register fields required for basic scaling operation are configured. The function to configure SC registers takes the sc_data handle, the source and destination widths and heights, and the scaler address data block offsets for the current context so that they can be configured. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:36:00 +00:00
void sc_config_scaler(struct sc_data *sc, u32 *sc_reg0, u32 *sc_reg8,
u32 *sc_reg17, unsigned int src_w, unsigned int src_h,
unsigned int dst_w, unsigned int dst_h);
[media] v4l: ti-vpe: create a scaler block library VPE and VIP IPs in DAR7x contain a scaler(SC) sub block. Create a library which will perform scaler block related configurations and hold SC register definitions. The functions provided by this library will be called by the vpe and vip drivers using a sc_data handle. The vpe_dev holds the sc_data handle. The handle represents an instance of the SC hardware, and the vpe driver uses it to access the scaler register offsets or helper functions to configure these registers. We move the SC register definitions to sc.h so that they aren't specific to VPE anymore. The register offsets are now relative to the sub-block, and not the VPE IP as a whole. In order for VPDMA to configure registers, it requires it's offset from the top level VPE module. A macro called GET_OFFSET_TOP is added to return the offset of the register relative to the VPE IP. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-12 08:35:57 +00:00
struct sc_data *sc_create(struct platform_device *pdev);
#endif
Reference in New Issue Copy Permalink