FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-22 09:22:37 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
da41787b9f
linux/sound/soc/codecs/wm8960.c

1493 lines
41 KiB
C
Raw Normal View History

ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/*
* wm8960.c -- WM8960 ALSA SoC Audio driver
*
ASoC: codecs: Refresh copyrights for Wolfson drivers Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-23 11:39:07 +00:00
* Copyright 2007-11 Wolfson Microelectronics, plc
*
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
* Author: Liam Girdwood
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
#include <linux/clk.h>
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
ASoC: Move WM8960 platform data into include/sound Avoids machine files having to peer into sound/soc which is a bit rude and icky. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 11:43:38 +00:00
#include <sound/wm8960.h>
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
#include "wm8960.h"
/* R25 - Power 1 */
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
#define WM8960_VMID_MASK 0x180
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
#define WM8960_VREF 0x40
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
/* R26 - Power 2 */
#define WM8960_PWR2_LOUT1 0x40
#define WM8960_PWR2_ROUT1 0x20
#define WM8960_PWR2_OUT3 0x02
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* R28 - Anti-pop 1 */
#define WM8960_POBCTRL 0x80
#define WM8960_BUFDCOPEN 0x10
#define WM8960_BUFIOEN 0x08
#define WM8960_SOFT_ST 0x04
#define WM8960_HPSTBY 0x01
/* R29 - Anti-pop 2 */
#define WM8960_DISOP 0x40
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
#define WM8960_DRES_MASK 0x30
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
static bool is_pll_freq_available(unsigned int source, unsigned int target);
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_pll(struct snd_soc_component *component,
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
unsigned int freq_in, unsigned int freq_out);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/*
* wm8960 register cache
* We can't read the WM8960 register space when we are
* using 2 wire for device control, so we cache them instead.
*/
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
static const struct reg_default wm8960_reg_defaults[] = {
ASoC: wm8960: Correct register 0 and 1 defaults Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-26 23:35:46 +00:00
{ 0x0, 0x00a7 },
{ 0x1, 0x00a7 },
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
{ 0x2, 0x0000 },
{ 0x3, 0x0000 },
{ 0x4, 0x0000 },
{ 0x5, 0x0008 },
{ 0x6, 0x0000 },
{ 0x7, 0x000a },
{ 0x8, 0x01c0 },
{ 0x9, 0x0000 },
{ 0xa, 0x00ff },
{ 0xb, 0x00ff },
{ 0x10, 0x0000 },
{ 0x11, 0x007b },
{ 0x12, 0x0100 },
{ 0x13, 0x0032 },
{ 0x14, 0x0000 },
{ 0x15, 0x00c3 },
{ 0x16, 0x00c3 },
{ 0x17, 0x01c0 },
{ 0x18, 0x0000 },
{ 0x19, 0x0000 },
{ 0x1a, 0x0000 },
{ 0x1b, 0x0000 },
{ 0x1c, 0x0000 },
{ 0x1d, 0x0000 },
{ 0x20, 0x0100 },
{ 0x21, 0x0100 },
{ 0x22, 0x0050 },
{ 0x25, 0x0050 },
{ 0x26, 0x0000 },
{ 0x27, 0x0000 },
{ 0x28, 0x0000 },
{ 0x29, 0x0000 },
{ 0x2a, 0x0040 },
{ 0x2b, 0x0000 },
{ 0x2c, 0x0000 },
{ 0x2d, 0x0050 },
{ 0x2e, 0x0050 },
{ 0x2f, 0x0000 },
{ 0x30, 0x0002 },
{ 0x31, 0x0037 },
{ 0x33, 0x0080 },
{ 0x34, 0x0008 },
{ 0x35, 0x0031 },
{ 0x36, 0x0026 },
{ 0x37, 0x00e9 },
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
};
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
static bool wm8960_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8960_RESET:
return true;
default:
return false;
}
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
struct wm8960_priv {
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
struct clk *mclk;
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
struct regmap *regmap;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
int (*set_bias_level)(struct snd_soc_component *,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
enum snd_soc_bias_level level);
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
struct snd_soc_dapm_widget *lout1;
struct snd_soc_dapm_widget *rout1;
struct snd_soc_dapm_widget *out3;
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
bool deemph;
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
int lrclk;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
int bclk;
int sysclk;
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
int clk_id;
int freq_in;
bool is_stream_in_use[2];
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
struct wm8960_data pdata;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
};
ASoC: wm8960: Move register initialisation to I2C driver probe() We must ensure that the clocking configuration is valid as rapidly as possible. And do software reset before the others registers updates, or the registers will be reset to the default state. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 08:53:08 +00:00
#define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* enumerated controls */
static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
"Right Inverted", "Stereo Inversion"};
static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
ASoC: wm8960: add kcontrol to select ADC data output add kcontrol to select ADC data output. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24 06:58:03 +00:00
static const char *wm8960_adc_data_output_sel[] = {
"Left Data = Left ADC; Right Data = Right ADC",
"Left Data = Left ADC; Right Data = Left ADC",
"Left Data = Right ADC; Right Data = Right ADC",
"Left Data = Right ADC; Right Data = Left ADC",
};
ASoC: wm8960: add DAC mono mix kcontrol In normal operation, the left and right channel digital audio data is converted to analogue in two separate DACs. There is a mono-mix mode where the two audio channels are mixed together digitally and then converted to analogue using only one DAC, while the other DAC is switched off. The mono-mix signal can be selected to appear on both analogue output channels. The mono mix is automatically attenuated by 6dB to prevent clipping. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:01 +00:00
static const char *wm8960_dmonomix[] = {"Stereo", "Mono"};
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static const struct soc_enum wm8960_enum[] = {
SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
ASoC: wm8960: add kcontrol to select ADC data output add kcontrol to select ADC data output. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24 06:58:03 +00:00
SOC_ENUM_SINGLE(WM8960_ADDCTL1, 2, 4, wm8960_adc_data_output_sel),
ASoC: wm8960: add DAC mono mix kcontrol In normal operation, the left and right channel digital audio data is converted to analogue in two separate DACs. There is a mono-mix mode where the two audio channels are mixed together digitally and then converted to analogue using only one DAC, while the other DAC is switched off. The mono-mix signal can be selected to appear on both analogue output channels. The mono mix is automatically attenuated by 6dB to prevent clipping. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:01 +00:00
SOC_ENUM_SINGLE(WM8960_ADDCTL1, 4, 2, wm8960_dmonomix),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
};
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_deemph(struct snd_soc_component *component)
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
int val, i, best;
/* If we're using deemphasis select the nearest available sample
* rate.
*/
if (wm8960->deemph) {
best = 1;
for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
if (abs(deemph_settings[i] - wm8960->lrclk) <
abs(deemph_settings[best] - wm8960->lrclk))
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
best = i;
}
val = best << 1;
} else {
val = 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_dbg(component->dev, "Set deemphasis %d\n", val);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
return snd_soc_component_update_bits(component, WM8960_DACCTL1,
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
0x6, val);
}
static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
ASoC: wm8960: Fix wrong value references for boolean kctl The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10 11:39:14 +00:00
ucontrol->value.integer.value[0] = wm8960->deemph;
ASoC: fix deemphasis control in wm8904/55/60 codecs Deemphasis control's .get callback should update control's value instead of returning it - return value of callback function is used for indicating error or success of operation. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-08 20:36:17 +00:00
return 0;
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
}
static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: harmless underflow in wm8960_put_deemph() We should only accept "deemph" values of zero and one, but by mistake we accept negatives as well. It's harmless but let's clean it up anyway. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-13 07:09:19 +00:00
unsigned int deemph = ucontrol->value.integer.value[0];
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
if (deemph > 1)
return -EINVAL;
wm8960->deemph = deemph;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
return wm8960_set_deemph(component);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
}
ASoC: wm8960: correct the min gain value of some PGA The min gain is the corresponding gain value when the register value is 0 instead of 1, just correct it. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:10 +00:00
static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0);
ASoC: wm8960: correct the min gain value of some PGA The min gain is the corresponding gain value when the register value is 0 instead of 1, just correct it. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:10 +00:00
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
static const DECLARE_TLV_DB_SCALE(lineinboost_tlv, -1500, 300, 1);
ASoC: wm8960: remove usage of obsoleted TLV-related macro TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()"). This commit removes usage of the macro, with the obsoleting macro renamed to SNDRV_CTL_TLVD_DECLARE_DB_RANGE(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-28 00:29:21 +00:00
static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(micboost_tlv,
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
0, 1, TLV_DB_SCALE_ITEM(0, 1300, 0),
2, 3, TLV_DB_SCALE_ITEM(2000, 900, 0),
ASoC: wm8960: remove usage of obsoleted TLV-related macro TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()"). This commit removes usage of the macro, with the obsoleting macro renamed to SNDRV_CTL_TLVD_DECLARE_DB_RANGE(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-28 00:29:21 +00:00
);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static const struct snd_kcontrol_new wm8960_snd_controls[] = {
SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
0, 63, 0, inpga_tlv),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
6, 1, 0),
SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
ASoC: wm8960: Fix the Input PGA Mute switch Change the xinvert value from 0 to 1 on the "Capture Switch" control WM8960 datasheet is shown as follows: Bit 7 at 00h and 01h register address 1 : Enable Mute, 0 : Disable Mute Signed-off-by: JongHo Kim <furmuwon@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-03 02:06:32 +00:00
7, 1, 1),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: wm8960: Fix input boost mixer left/right naming INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:08 +00:00
SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),
ASoC: wm8960: Fix input boost mixer left/right naming INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:08 +00:00
SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv),
ASoC: wm8960: Fix input boost mixer left/right naming INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:08 +00:00
SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv),
ASoC: wm8960: Fix input boost mixer left/right naming INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:08 +00:00
SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv),
SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume",
ASoC: wm8960: correct the max register value of mic boost pga the max register value of mic boost pga should be 3. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-18 09:19:43 +00:00
WM8960_RINPATH, 4, 3, 0, micboost_tlv),
ASoC: wm8960: correct gain value for input PGA and add microphone PGA The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-09 11:29:11 +00:00
SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT1 Volume",
ASoC: wm8960: correct the max register value of mic boost pga the max register value of mic boost pga should be 3. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-18 09:19:43 +00:00
WM8960_LINPATH, 4, 3, 0, micboost_tlv),
ASoC: wm8960: Add input boost volume control Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-26 23:36:37 +00:00
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
0, 255, 0, dac_tlv),
SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
0, 127, 0, out_tlv),
SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
7, 1, 0),
SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
0, 127, 0, out_tlv),
SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
7, 1, 0),
SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
ASoC: Remove current WM8960 deemphasis control It will be replaced with automatic deemphasis rate configuration but since we have an enumeration table in this driver this is done in a separate commit to make the renumbering of the enumeration items clear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:54:32 +00:00
SOC_ENUM("ADC Polarity", wm8960_enum[0]),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1] the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-11 11:14:36 +00:00
SOC_ENUM("DAC Polarity", wm8960_enum[1]),
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
wm8960_get_deemph, wm8960_put_deemph),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Remove current WM8960 deemphasis control It will be replaced with automatic deemphasis rate configuration but since we have an enumeration table in this driver this is done in a separate commit to make the renumbering of the enumeration items clear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:54:32 +00:00
SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]),
SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
ASoC: Remove current WM8960 deemphasis control It will be replaced with automatic deemphasis rate configuration but since we have an enumeration table in this driver this is done in a separate commit to make the renumbering of the enumeration items clear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:54:32 +00:00
SOC_ENUM("ALC Function", wm8960_enum[4]),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
ASoC: Remove current WM8960 deemphasis control It will be replaced with automatic deemphasis rate configuration but since we have an enumeration table in this driver this is done in a separate commit to make the renumbering of the enumeration items clear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:54:32 +00:00
SOC_ENUM("ALC Mode", wm8960_enum[5]),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
ASoC: wm8960: Fix ADC volume bits Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14 01:15:38 +00:00
SOC_DOUBLE_R_TLV("ADC PCM Capture Volume", WM8960_LADC, WM8960_RADC,
0, 255, 0, adc_tlv),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
ASoC: wm8960: add kcontrol to select ADC data output add kcontrol to select ADC data output. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24 06:58:03 +00:00
SOC_ENUM("ADC Data Output Select", wm8960_enum[6]),
ASoC: wm8960: add DAC mono mix kcontrol In normal operation, the left and right channel digital audio data is converted to analogue in two separate DACs. There is a mono-mix mode where the two audio channels are mixed together digitally and then converted to analogue using only one DAC, while the other DAC is switched off. The mono-mix signal can be selected to appear on both analogue output channels. The mono mix is automatically attenuated by 6dB to prevent clipping. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:01 +00:00
SOC_ENUM("DAC Mono Mix", wm8960_enum[7]),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
};
static const struct snd_kcontrol_new wm8960_lin_boost[] = {
SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
};
static const struct snd_kcontrol_new wm8960_lin[] = {
SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
};
static const struct snd_kcontrol_new wm8960_rin_boost[] = {
SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
};
static const struct snd_kcontrol_new wm8960_rin[] = {
SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
};
static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
};
static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
};
static const struct snd_kcontrol_new wm8960_mono_out[] = {
SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
};
static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("LINPUT1"),
SND_SOC_DAPM_INPUT("RINPUT1"),
SND_SOC_DAPM_INPUT("LINPUT2"),
SND_SOC_DAPM_INPUT("RINPUT2"),
SND_SOC_DAPM_INPUT("LINPUT3"),
SND_SOC_DAPM_INPUT("RINPUT3"),
ASoC: Convert wm8960 MICBIAS to a supply widget Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27 07:46:17 +00:00
SND_SOC_DAPM_SUPPLY("MICB", WM8960_POWER1, 1, 0, NULL, 0),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
wm8960_lin, ARRAY_SIZE(wm8960_lin)),
SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
wm8960_rin, ARRAY_SIZE(wm8960_rin)),
ASoC: wm8960: Fix ADC power bits Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-26 23:36:48 +00:00
SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER1, 3, 0),
SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
&wm8960_loutput_mixer[0],
ARRAY_SIZE(wm8960_loutput_mixer)),
SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
&wm8960_routput_mixer[0],
ARRAY_SIZE(wm8960_routput_mixer)),
SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPK_LP"),
SND_SOC_DAPM_OUTPUT("SPK_LN"),
SND_SOC_DAPM_OUTPUT("HP_L"),
SND_SOC_DAPM_OUTPUT("HP_R"),
SND_SOC_DAPM_OUTPUT("SPK_RP"),
SND_SOC_DAPM_OUTPUT("SPK_RN"),
SND_SOC_DAPM_OUTPUT("OUT3"),
};
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
static const struct snd_soc_dapm_widget wm8960_dapm_widgets_out3[] = {
SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
&wm8960_mono_out[0],
ARRAY_SIZE(wm8960_mono_out)),
};
/* Represent OUT3 as a PGA so that it gets turned on with LOUT1/ROUT1 */
static const struct snd_soc_dapm_widget wm8960_dapm_widgets_capless[] = {
SND_SOC_DAPM_PGA("OUT3 VMID", WM8960_POWER2, 1, 0, NULL, 0),
};
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static const struct snd_soc_dapm_route audio_paths[] = {
{ "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
{ "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
{ "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
ASoC: wm8960: boost switch should be closed when using L/RINPUT1 L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:02 +00:00
{ "Left Input Mixer", "Boost Switch", "Left Boost Mixer" },
{ "Left Input Mixer", "Boost Switch", "LINPUT1" }, /* Really Boost Switch */
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "Left Input Mixer", NULL, "LINPUT2" },
{ "Left Input Mixer", NULL, "LINPUT3" },
{ "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
{ "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
{ "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
ASoC: wm8960: boost switch should be closed when using L/RINPUT1 L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:02 +00:00
{ "Right Input Mixer", "Boost Switch", "Right Boost Mixer" },
{ "Right Input Mixer", "Boost Switch", "RINPUT1" }, /* Really Boost Switch */
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "Right Input Mixer", NULL, "RINPUT2" },
ASoC: wm8960: fix "RINPUT3" audio route error It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-05-12 06:58:36 +00:00
{ "Right Input Mixer", NULL, "RINPUT3" },
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "Left ADC", NULL, "Left Input Mixer" },
{ "Right ADC", NULL, "Right Input Mixer" },
{ "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
ASoC: wm8960: boost switch should be closed when using L/RINPUT1 L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:02 +00:00
{ "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer" },
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
{ "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
ASoC: wm8960: boost switch should be closed when using L/RINPUT1 L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08 08:57:02 +00:00
{ "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" },
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
{ "LOUT1 PGA", NULL, "Left Output Mixer" },
{ "ROUT1 PGA", NULL, "Right Output Mixer" },
{ "HP_L", NULL, "LOUT1 PGA" },
{ "HP_R", NULL, "ROUT1 PGA" },
{ "Left Speaker PGA", NULL, "Left Output Mixer" },
{ "Right Speaker PGA", NULL, "Right Output Mixer" },
{ "Left Speaker Output", NULL, "Left Speaker PGA" },
{ "Right Speaker Output", NULL, "Right Speaker PGA" },
{ "SPK_LN", NULL, "Left Speaker Output" },
{ "SPK_LP", NULL, "Left Speaker Output" },
{ "SPK_RN", NULL, "Right Speaker Output" },
{ "SPK_RP", NULL, "Right Speaker Output" },
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
};
static const struct snd_soc_dapm_route audio_paths_out3[] = {
{ "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
{ "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{ "OUT3", NULL, "Mono Output Mixer", }
};
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
static const struct snd_soc_dapm_route audio_paths_capless[] = {
{ "HP_L", NULL, "OUT3 VMID" },
{ "HP_R", NULL, "OUT3 VMID" },
{ "OUT3 VMID", NULL, "Left Output Mixer" },
{ "OUT3 VMID", NULL, "Right Output Mixer" },
};
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_add_widgets(struct snd_soc_component *component)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
struct wm8960_data *pdata = &wm8960->pdata;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
struct snd_soc_dapm_widget *w;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ARRAY_SIZE(wm8960_dapm_widgets));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
/* In capless mode OUT3 is used to provide VMID for the
* headphone outputs, otherwise it is used as a mono mixer.
*/
if (pdata && pdata->capless) {
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_capless,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
ARRAY_SIZE(wm8960_dapm_widgets_capless));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_add_routes(dapm, audio_paths_capless,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
ARRAY_SIZE(audio_paths_capless));
} else {
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_out3,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
ARRAY_SIZE(wm8960_dapm_widgets_out3));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
snd_soc_dapm_add_routes(dapm, audio_paths_out3,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
ARRAY_SIZE(audio_paths_out3));
}
/* We need to power up the headphone output stage out of
* sequence for capless mode. To save scanning the widget
* list each time to find the desired power state do so now
* and save the result.
*/
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
list_for_each_entry(w, &component->card->widgets, list) {
ASoC: wm8960: Replace direct snd_soc_codec dapm field access The dapm field of the snd_soc_codec struct is eventually going to be removed, in preparation for this replace all manual access to codec->dapm.bias_level with snd_soc_codec_get_bias_level() and replace all other manual access to codec->dapm with snd_soc_codec_get_dapm(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-01 08:10:48 +00:00
if (w->dapm != dapm)
ASoC: Move widgets from DAPM context to snd_soc_card Decoupling widgets from DAPM context is required when extending the ASoC core to cross-device paths. Even the list of widgets are now kept in struct snd_soc_card, the widget listing in sysfs and debugs remain sorted per device. This patch makes possible to build cross-device paths but does not extend yet the DAPM to handle codec bias and widget power changes of an another device. Cross-device paths are registered by listing the widgets from device A in a map for device B. In case of conflicting widget names between the devices, a uniform name prefix is needed to separate them. See commit ead9b91 "ASoC: Add optional name_prefix for kcontrol, widget and route names" for help. An example below shows a path that connects MONO out of A into Line In of B: static const struct snd_soc_dapm_route mapA[] = { {"MONO", NULL, "DAC"}, }; static const struct snd_soc_dapm_route mapB[] = { {"Line In", NULL, "MONO"}, }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14 10:18:31 +00:00
continue;
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
if (strcmp(w->name, "LOUT1 PGA") == 0)
wm8960->lout1 = w;
if (strcmp(w->name, "ROUT1 PGA") == 0)
wm8960->rout1 = w;
if (strcmp(w->name, "OUT3 VMID") == 0)
wm8960->out3 = w;
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = codec_dai->component;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
u16 iface = 0;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
iface |= 0x0040;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
iface |= 0x0002;
break;
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
iface |= 0x0001;
break;
case SND_SOC_DAIFMT_DSP_A:
iface |= 0x0003;
break;
case SND_SOC_DAIFMT_DSP_B:
iface |= 0x0013;
break;
default:
return -EINVAL;
}
/* clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
iface |= 0x0090;
break;
case SND_SOC_DAIFMT_IB_NF:
iface |= 0x0080;
break;
case SND_SOC_DAIFMT_NB_IF:
iface |= 0x0010;
break;
default:
return -EINVAL;
}
/* set iface */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_IFACE1, iface);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
ASoC: Automatically manage ALC coefficients for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 14:54:51 +00:00
static struct {
int rate;
unsigned int val;
} alc_rates[] = {
{ 48000, 0 },
{ 44100, 0 },
{ 32000, 1 },
{ 22050, 2 },
{ 24000, 2 },
{ 16000, 3 },
ASoC: wm8960: Fix capture sample rate from 11250 to 11025 wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by: Zidan Wang <b50113@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-31 03:39:14 +00:00
{ 11025, 4 },
ASoC: Automatically manage ALC coefficients for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 14:54:51 +00:00
{ 12000, 4 },
{ 8000, 5 },
};
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
/* -1 for reserved value */
static const int sysclk_divs[] = { 1, -1, 2, -1 };
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
/* Multiply 256 for internal 256 div */
static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
/* Multiply 10 to eliminate decimials */
static const int bclk_divs[] = {
10, 15, 20, 30, 40, 55, 60, 80, 110,
120, 160, 220, 240, 320, 320, 320
};
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
/**
* wm8960_configure_sysclk - checks if there is a sysclk frequency available
* The sysclk must be chosen such that:
* - sysclk = MCLK / sysclk_divs
* - lrclk = sysclk / dac_divs
* - 10 * bclk = sysclk / bclk_divs
*
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
* If we cannot find an exact match for (sysclk, lrclk, bclk)
* triplet, we relax the bclk such that bclk is chosen as the
* closest available frequency greater than expected bclk.
*
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
* @wm8960_priv: wm8960 codec private data
* @mclk: MCLK used to derive sysclk
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
* @bclk_idx: bclk_divs index for found bclk
*
* Returns:
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
* -1, in case no sysclk frequency available found
* >=0, in case we could derive bclk and lrclk from sysclk using
* (@sysclk_idx, @dac_idx, @bclk_idx) dividers
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
*/
static
int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
int *sysclk_idx, int *dac_idx, int *bclk_idx)
{
int sysclk, bclk, lrclk;
int i, j, k;
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
int diff, closest = mclk;
/* marker for no match */
*bclk_idx = -1;
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
bclk = wm8960->bclk;
lrclk = wm8960->lrclk;
/* check if the sysclk frequency is available. */
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
if (sysclk_divs[i] == -1)
continue;
sysclk = mclk / sysclk_divs[i];
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
if (sysclk != dac_divs[j] * lrclk)
continue;
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
diff = sysclk - bclk * bclk_divs[k] / 10;
if (diff == 0) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
break;
}
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
if (diff > 0 && closest > diff) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
closest = diff;
}
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
}
if (k != ARRAY_SIZE(bclk_divs))
break;
}
if (j != ARRAY_SIZE(dac_divs))
break;
}
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
return *bclk_idx;
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
}
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
/**
* wm8960_configure_pll - checks if there is a PLL out frequency available
* The PLL out frequency must be chosen such that:
* - sysclk = lrclk * dac_divs
* - freq_out = sysclk * sysclk_divs
* - 10 * sysclk = bclk * bclk_divs
*
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
* If we cannot find an exact match for (sysclk, lrclk, bclk)
* triplet, we relax the bclk such that bclk is chosen as the
* closest available frequency greater than expected bclk.
*
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
* @component: component structure
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
* @freq_in: input frequency used to derive freq out via PLL
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
* @bclk_idx: bclk_divs index for found bclk
*
* Returns:
ASoC: codec: wm9860: avoid maybe-uninitialized warning The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:51 +00:00
* < 0, in case no PLL frequency out available was found
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
* >=0, in case we could derive bclk, lrclk, sysclk from PLL out using
* (@sysclk_idx, @dac_idx, @bclk_idx) dividers
*/
static
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
int wm8960_configure_pll(struct snd_soc_component *component, int freq_in,
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
int *sysclk_idx, int *dac_idx, int *bclk_idx)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
int sysclk, bclk, lrclk, freq_out;
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
int diff, closest, best_freq_out;
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
int i, j, k;
bclk = wm8960->bclk;
lrclk = wm8960->lrclk;
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
closest = freq_in;
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
best_freq_out = -EINVAL;
ASoC: codec: wm9860: avoid maybe-uninitialized warning The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:51 +00:00
*sysclk_idx = *dac_idx = *bclk_idx = -1;
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
if (sysclk_divs[i] == -1)
continue;
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
sysclk = lrclk * dac_divs[j];
freq_out = sysclk * sysclk_divs[i];
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
if (!is_pll_freq_available(freq_in, freq_out))
continue;
diff = sysclk - bclk * bclk_divs[k] / 10;
if (diff == 0) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
ASoC: codec: wm9860: avoid maybe-uninitialized warning The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:51 +00:00
return freq_out;
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
}
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
if (diff > 0 && closest > diff) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
closest = diff;
best_freq_out = freq_out;
}
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
}
}
}
ASoC: codec: wm8960: Relax bit clock computation when using PLL Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:52 +00:00
return best_freq_out;
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_configure_clocking(struct snd_soc_component *component)
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: codec: wm9860: Refactor PLL out freq search Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04 16:45:13 +00:00
int freq_out, freq_in;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
u16 iface1 = snd_soc_component_read32(component, WM8960_IFACE1);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
int i, j, k;
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
int ret;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
if (!(iface1 & (1<<6))) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_dbg(component->dev,
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
"Codec is slave mode, no need to configure clock\n");
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
return 0;
}
if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev, "No MCLK configured\n");
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
return -EINVAL;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
}
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
freq_in = wm8960->freq_in;
/*
* If it's sysclk auto mode, check if the MCLK can provide sysclk or
* not. If MCLK can provide sysclk, using MCLK to provide sysclk
* directly. Otherwise, auto select a available pll out frequency
* and set PLL.
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO) {
/* disable the PLL and using MCLK to provide sysclk */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_set_pll(component, 0, 0);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
freq_out = freq_in;
} else if (wm8960->sysclk) {
freq_out = wm8960->sysclk;
} else {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev, "No SYSCLK configured\n");
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
return -EINVAL;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
}
ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:09 +00:00
if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
ASoC: codec: wm8960: Refactor sysclk freq search Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:24 +00:00
ret = wm8960_configure_sysclk(wm8960, freq_out, &i, &j, &k);
ASoC: codec: wm8960: Relax bit clock computation WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 15:03:25 +00:00
if (ret >= 0) {
ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:09 +00:00
goto configure_clock;
} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev, "failed to configure clock\n");
ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-19 13:09:09 +00:00
return -EINVAL;
}
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
}
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
freq_out = wm8960_configure_pll(component, freq_in, &i, &j, &k);
ASoC: codec: wm9860: avoid maybe-uninitialized warning The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:51 +00:00
if (freq_out < 0) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev, "failed to configure clock via PLL\n");
ASoC: codec: wm9860: avoid maybe-uninitialized warning The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26 13:09:51 +00:00
return freq_out;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_set_pll(component, freq_in, freq_out);
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
configure_clock:
/* configure sysclk clock */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1, 3 << 1, i << 1);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
/* configure frame clock */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 3, j << 3);
snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 6, j << 6);
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
/* configure bit clock */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK2, 0xf, k);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
return 0;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static int wm8960_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = dai->component;
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
u16 iface = snd_soc_component_read32(component, WM8960_IFACE1) & 0xfff3;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
ASoC: Automatically manage ALC coefficients for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 14:54:51 +00:00
int i;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
wm8960->bclk = snd_soc_params_to_bclk(params);
if (params_channels(params) == 1)
wm8960->bclk *= 2;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* bit size */
ASoC: wm8960: Convert to params_width() The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 11:53:23 +00:00
switch (params_width(params)) {
case 16:
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
ASoC: wm8960: Convert to params_width() The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 11:53:23 +00:00
case 20:
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
iface |= 0x0004;
break;
ASoC: wm8960: Convert to params_width() The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 11:53:23 +00:00
case 24:
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
iface |= 0x0008;
break;
ASoC: wm8960: add 32 bit word length support According to referance manual, right justify mode can't support 32 bit word length. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:21 +00:00
case 32:
/* right justify mode does not support 32 word length */
if ((iface & 0x3) != 0) {
iface |= 0x000c;
break;
}
ASoC: wm8960: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115041 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01 19:51:59 +00:00
/* fall through */
ASoC: wm8960: add support for big-endian audio samples PowerPC ASoC drivers frequently use the _BE variants of the SNDRV_PCM_FORMAT macros, so we need to look for those as well. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14 21:14:37 +00:00
default:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev, "unsupported width %d\n",
ASoC: wm8960: Convert to params_width() The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 11:53:23 +00:00
params_width(params));
ASoC: wm8960: add support for big-endian audio samples PowerPC ASoC drivers frequently use the _BE variants of the SNDRV_PCM_FORMAT macros, so we need to look for those as well. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14 21:14:37 +00:00
return -EINVAL;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
}
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
wm8960->lrclk = params_rate(params);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
/* Update filters for the new rate */
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
if (tx) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_set_deemph(component);
ASoC: Automatically manage ALC coefficients for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 14:54:51 +00:00
} else {
for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
if (alc_rates[i].rate == params_rate(params))
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component,
ASoC: Automatically manage ALC coefficients for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 14:54:51 +00:00
WM8960_ADDCTL3, 0x7,
alc_rates[i].val);
ASoC: Automatically manage DAC deemphasis rate for WM8960 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-05 04:58:16 +00:00
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* set iface */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_IFACE1, iface);
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
wm8960->is_stream_in_use[tx] = true;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
!wm8960->is_stream_in_use[!tx])
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
return wm8960_configure_clocking(component);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
return 0;
}
static int wm8960_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = dai->component;
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
wm8960->is_stream_in_use[tx] = false;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
static int wm8960_mute(struct snd_soc_dai *dai, int mute)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = dai->component;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
if (mute)
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0x8);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
else
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
enum snd_soc_bias_level level)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
u16 pm2 = snd_soc_component_read32(component, WM8960_POWER2);
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
int ret;
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
switch (snd_soc_component_get_bias_level(component)) {
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
case SND_SOC_BIAS_STANDBY:
if (!IS_ERR(wm8960->mclk)) {
ret = clk_prepare_enable(wm8960->mclk);
if (ret) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev,
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
"Failed to enable MCLK: %d\n",
ret);
return ret;
}
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
ret = wm8960_configure_clocking(component);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
if (ret)
return ret;
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
/* Set VMID to 2x50k */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x80);
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
break;
case SND_SOC_BIAS_ON:
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
/*
* If it's sysclk auto mode, and the pll is enabled,
* disable the pll
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_set_pll(component, 0, 0);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
break;
default:
break;
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case SND_SOC_BIAS_STANDBY:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
regcache_sync(wm8960->regmap);
ASoC: wm8960: Convert to snd_soc_cache_sync Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 13:50:23 +00:00
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* Enable anti-pop features */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_APOP1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* Enable & ramp VMID at 2x50k */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1, 0x80, 0x80);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
msleep(100);
/* Enable VREF */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1, WM8960_VREF,
ASoC: wm8960: Use snd_soc_update_bits for read-modify-write Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-08 03:09:15 +00:00
WM8960_VREF);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* Disable anti-pop features */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_APOP1, WM8960_BUFIOEN);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
}
/* Set VMID to 2x250k */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x100);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case SND_SOC_BIAS_OFF:
/* Enable anti-pop features */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_APOP1,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
/* Disable VMID and VREF, let them discharge */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_POWER1, 0);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
msleep(600);
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
break;
}
return 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_bias_level_capless(struct snd_soc_component *component,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
enum snd_soc_bias_level level)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
u16 pm2 = snd_soc_component_read32(component, WM8960_POWER2);
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
int reg, ret;
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
switch (snd_soc_component_get_bias_level(component)) {
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
case SND_SOC_BIAS_STANDBY:
/* Enable anti pop mode */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_APOP1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN);
/* Enable LOUT1, ROUT1 and OUT3 if they're enabled */
reg = 0;
if (wm8960->lout1 && wm8960->lout1->power)
reg |= WM8960_PWR2_LOUT1;
if (wm8960->rout1 && wm8960->rout1->power)
reg |= WM8960_PWR2_ROUT1;
if (wm8960->out3 && wm8960->out3->power)
reg |= WM8960_PWR2_OUT3;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER2,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_PWR2_LOUT1 |
WM8960_PWR2_ROUT1 |
WM8960_PWR2_OUT3, reg);
/* Enable VMID at 2*50k */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_VMID_MASK, 0x80);
/* Ramp */
msleep(100);
/* Enable VREF */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_VREF, WM8960_VREF);
msleep(100);
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
if (!IS_ERR(wm8960->mclk)) {
ret = clk_prepare_enable(wm8960->mclk);
if (ret) {
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
dev_err(component->dev,
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
"Failed to enable MCLK: %d\n",
ret);
return ret;
}
}
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
ret = wm8960_configure_clocking(component);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
if (ret)
return ret;
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
break;
case SND_SOC_BIAS_ON:
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
/*
* If it's sysclk auto mode, and the pll is enabled,
* disable the pll
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_set_pll(component, 0, 0);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
/* Enable anti-pop mode */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_APOP1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN);
/* Disable VMID and VREF */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_VREF | WM8960_VMID_MASK, 0);
break;
ASoC: wm8960: Convert to snd_soc_cache_sync Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 13:50:23 +00:00
case SND_SOC_BIAS_OFF:
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
regcache_sync(wm8960->regmap);
ASoC: wm8960: Convert to snd_soc_cache_sync Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 13:50:23 +00:00
break;
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
default:
break;
}
break;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
case SND_SOC_BIAS_STANDBY:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
switch (snd_soc_component_get_bias_level(component)) {
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
case SND_SOC_BIAS_PREPARE:
/* Disable HP discharge */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_APOP2,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_DISOP | WM8960_DRES_MASK,
0);
/* Disable anti-pop features */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_APOP1,
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN);
break;
default:
break;
}
break;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Add support for WM8960 capless mode The WM8960 headphone outputs can be run in capless mode with OUT3 used to drive a pseudo ground for the headphone drivers. In this mode the mono mixer is not used, the mixer should be turned on in concert with the headphone output drivers and the device bias levels are managed differently. Also tweak the existing bias management to remove the use of active discharge while we're at it since that's often audible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 13:47:03 +00:00
case SND_SOC_BIAS_OFF:
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
}
return 0;
}
/* PLL divisors */
struct _pll_div {
u32 pre_div:1;
u32 n:4;
u32 k:24;
};
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
static bool is_pll_freq_available(unsigned int source, unsigned int target)
{
unsigned int Ndiv;
if (source == 0 || target == 0)
return false;
/* Scale up target to PLL operating frequency */
target *= 4;
Ndiv = target / source;
if (Ndiv < 6) {
source >>= 1;
Ndiv = target / source;
}
if ((Ndiv < 6) || (Ndiv > 12))
return false;
return true;
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* The size in bits of the pll divide multiplied by 10
* to allow rounding later */
#define FIXED_PLL_SIZE ((1 << 24) * 10)
static int pll_factors(unsigned int source, unsigned int target,
struct _pll_div *pll_div)
{
unsigned long long Kpart;
unsigned int K, Ndiv, Nmod;
pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
/* Scale up target to PLL operating frequency */
target *= 4;
Ndiv = target / source;
if (Ndiv < 6) {
source >>= 1;
pll_div->pre_div = 1;
Ndiv = target / source;
} else
pll_div->pre_div = 0;
if ((Ndiv < 6) || (Ndiv > 12)) {
pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
return -EINVAL;
}
pll_div->n = Ndiv;
Nmod = target % source;
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
do_div(Kpart, source);
K = Kpart & 0xFFFFFFFF;
/* Check if we need to round */
if ((K % 10) >= 5)
K += 5;
/* Move down to proper range now rounding is done */
K /= 10;
pll_div->k = K;
pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
pll_div->n, pll_div->k, pll_div->pre_div);
return 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_pll(struct snd_soc_component *component,
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
unsigned int freq_in, unsigned int freq_out)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
u16 reg;
static struct _pll_div pll_div;
int ret;
if (freq_in && freq_out) {
ret = pll_factors(freq_in, freq_out, &pll_div);
if (ret != 0)
return ret;
}
/* Disable the PLL: even if we are changing the frequency the
* PLL needs to be disabled while we do so. */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0);
snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
if (!freq_in || !freq_out)
return 0;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_PLL1) & ~0x3f;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
reg |= pll_div.pre_div << 4;
reg |= pll_div.n;
if (pll_div.k) {
reg |= 0x20;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
snd_soc_component_write(component, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
snd_soc_component_write(component, WM8960_PLL4, pll_div.k & 0xff);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_write(component, WM8960_PLL1, reg);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
/* Turn it on */
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0x1);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
msleep(250);
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0x1);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = codec_dai->component;
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
wm8960->freq_in = freq_in;
if (pll_id == WM8960_SYSCLK_AUTO)
return 0;
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
return wm8960_set_pll(component, freq_in, freq_out);
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = codec_dai->component;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
u16 reg;
switch (div_id) {
case WM8960_SYSCLKDIV:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_CLOCK1) & 0x1f9;
snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case WM8960_DACDIV:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_CLOCK1) & 0x1c7;
snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case WM8960_OPCLKDIV:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_PLL1) & 0x03f;
snd_soc_component_write(component, WM8960_PLL1, reg | div);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case WM8960_DCLKDIV:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_CLOCK2) & 0x03f;
snd_soc_component_write(component, WM8960_CLOCK2, reg | div);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
case WM8960_TOCLKSEL:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
reg = snd_soc_component_read32(component, WM8960_ADDCTL1) & 0x1fd;
snd_soc_component_write(component, WM8960_ADDCTL1, reg | div);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
break;
default:
return -EINVAL;
}
return 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_set_bias_level(struct snd_soc_component *component,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
enum snd_soc_bias_level level)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
return wm8960->set_bias_level(component, level);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
}
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct snd_soc_component *component = dai->component;
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
switch (clk_id) {
case WM8960_SYSCLK_MCLK:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1,
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
0x1, WM8960_SYSCLK_MCLK);
break;
case WM8960_SYSCLK_PLL:
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_component_update_bits(component, WM8960_CLOCK1,
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
0x1, WM8960_SYSCLK_PLL);
break;
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
case WM8960_SYSCLK_AUTO:
break;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
default:
return -EINVAL;
}
wm8960->sysclk = freq;
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
wm8960->clk_id = clk_id;
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
return 0;
}
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
#define WM8960_RATES SNDRV_PCM_RATE_8000_48000
#define WM8960_FORMATS \
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
ASoC: wm8960: add 32 bit word length support According to referance manual, right justify mode can't support 32 bit word length. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:21 +00:00
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Constify snd_soc_dai_ops structs Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 10:40:40 +00:00
static const struct snd_soc_dai_ops wm8960_dai_ops = {
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
.hw_params = wm8960_hw_params,
ASoC: wm8960: update pll and clock setting function Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 11:25:15 +00:00
.hw_free = wm8960_hw_free,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
.digital_mute = wm8960_mute,
.set_fmt = wm8960_set_dai_fmt,
.set_clkdiv = wm8960_set_dai_clkdiv,
.set_pll = wm8960_set_dai_pll,
ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock wm8960 codec driver missing configure its bit clock and frame clock for codec master mode, so add support for it. It will calculate a appropriate frequency dividing ratio according to the system clock, bit clock and frame clock, then set the corresponding registers. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 06:58:08 +00:00
.set_sysclk = wm8960_set_dai_sysclk,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
};
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
static struct snd_soc_dai_driver wm8960_dai = {
.name = "wm8960-hifi",
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = WM8960_RATES,
.formats = WM8960_FORMATS,},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM8960_RATES,
.formats = WM8960_FORMATS,},
.ops = &wm8960_dai_ops,
.symmetric_rates = 1,
};
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static int wm8960_probe(struct snd_soc_component *component)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
struct wm8960_data *pdata = &wm8960->pdata;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
if (pdata->capless)
wm8960->set_bias_level = wm8960_set_bias_level_capless;
else
wm8960->set_bias_level = wm8960_set_bias_level_out3;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
snd_soc_add_component_controls(component, wm8960_snd_controls,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
ARRAY_SIZE(wm8960_snd_controls));
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
wm8960_add_widgets(component);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
return 0;
}
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
static const struct snd_soc_component_driver soc_component_dev_wm8960 = {
.probe = wm8960_probe,
.set_bias_level = wm8960_set_bias_level,
.suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
};
static const struct regmap_config wm8960_regmap = {
.reg_bits = 7,
.val_bits = 9,
.max_register = WM8960_PLL4,
.reg_defaults = wm8960_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8960_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = wm8960_volatile,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
};
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
static void wm8960_set_pdata_from_of(struct i2c_client *i2c,
struct wm8960_data *pdata)
{
const struct device_node *np = i2c->dev.of_node;
if (of_property_read_bool(np, "wlf,capless"))
pdata->capless = true;
if (of_property_read_bool(np, "wlf,shared-lrclk"))
pdata->shared_lrclk = true;
}
ASoC: codecs: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07 14:26:37 +00:00
static int wm8960_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
ASoC: wm8960: Support shared LRCLK If the LRCLK is shared and the WM8960 is clock master then we should enable the LRCM bit to tell the device that it should drive LRCLK when either ADC or DAC is enabled rather than separately driving the two LRCLKs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13 03:46:58 +00:00
struct wm8960_data *pdata = dev_get_platdata(&i2c->dev);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
struct wm8960_priv *wm8960;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
int ret;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
ASoC: Convert WM8960 to devm_kzalloc() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-16 06:42:58 +00:00
wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv),
GFP_KERNEL);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
if (wm8960 == NULL)
return -ENOMEM;
ASoC: wm8960: Let wm8960 codec driver manage its own MCLK When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 07:31:44 +00:00
wm8960->mclk = devm_clk_get(&i2c->dev, "mclk");
if (IS_ERR(wm8960->mclk)) {
if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
}
ASoC: wm8960: Use devm_regmap_init_i2c() devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. There was no explicit regmap_exit call in this function which was probably a bug. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-26 11:49:43 +00:00
wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap);
ASoC: wm8960: Convert to direct regmap API usage Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10 11:23:57 +00:00
if (IS_ERR(wm8960->regmap))
return PTR_ERR(wm8960->regmap);
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
if (pdata)
memcpy(&wm8960->pdata, pdata, sizeof(struct wm8960_data));
else if (i2c->dev.of_node)
wm8960_set_pdata_from_of(i2c, &wm8960->pdata);
ASoC: wm8960: Move register initialisation to I2C driver probe() We must ensure that the clocking configuration is valid as rapidly as possible. And do software reset before the others registers updates, or the registers will be reset to the default state. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 08:53:08 +00:00
ret = wm8960_reset(wm8960->regmap);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
return ret;
}
if (wm8960->pdata.shared_lrclk) {
ASoC: wm8960: Support shared LRCLK If the LRCLK is shared and the WM8960 is clock master then we should enable the LRCM bit to tell the device that it should drive LRCLK when either ADC or DAC is enabled rather than separately driving the two LRCLKs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13 03:46:58 +00:00
ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2,
0x4, 0x4);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable LRCM: %d\n",
ret);
return ret;
}
}
ASoC: wm8960: Move register initialisation to I2C driver probe() We must ensure that the clocking configuration is valid as rapidly as possible. And do software reset before the others registers updates, or the registers will be reset to the default state. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 08:53:08 +00:00
/* Latch the update bits */
regmap_update_bits(wm8960->regmap, WM8960_LINVOL, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_RINVOL, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_LADC, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_RADC, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_LDAC, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_RDAC, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_LOUT1, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_ROUT1, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_LOUT2, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_ROUT2, 0x100, 0x100);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
i2c_set_clientdata(i2c, wm8960);
ASoC: wm8960: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 03:05:45 +00:00
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8960, &wm8960_dai, 1);
ASoC: Convert WM8960 to devm_kzalloc() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-16 06:42:58 +00:00
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
return ret;
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
}
ASoC: codecs: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07 14:26:37 +00:00
static int wm8960_i2c_remove(struct i2c_client *client)
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
{
return 0;
}
static const struct i2c_device_id wm8960_i2c_id[] = {
{ "wm8960", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
static const struct of_device_id wm8960_of_match[] = {
{ .compatible = "wlf,wm8960", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8960_of_match);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
static struct i2c_driver wm8960_i2c_driver = {
.driver = {
ASoC: Remove unused -codec from Wolfson device driver names Devices that aren't MFDs don't need to distinguish this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02 22:08:49 +00:00
.name = "wm8960",
ASoC: wm8960: Add device tree support Document the device tree binding for the WM8960 codec, and modify the driver to extract the platform data from device tree, if present. Signed-off-by: Zidan Wang <b50113@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 11:07:48 +00:00
.of_match_table = wm8960_of_match,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
},
.probe = wm8960_i2c_probe,
ASoC: codecs: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07 14:26:37 +00:00
.remove = wm8960_i2c_remove,
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
.id_table = wm8960_i2c_id,
};
ASoC: wm8960: Use module_i2c_driver module_i2c_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-06 11:55:36 +00:00
module_i2c_driver(wm8960_i2c_driver);
ASoC: Add WM8960 CODEC driver The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes. This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07 18:20:14 +00:00
MODULE_DESCRIPTION("ASoC WM8960 driver");
MODULE_AUTHOR("Liam Girdwood");
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink