FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-01-25 12:05:31 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7

Browse Source 
- Reserve memory regions for Hi6220
 - Add sp804 timer node for Hi6220
 - Add cpu and cluster level's low power state for Hi6220
 - Add gpio configuration nodes for Hi6220
 - Add pinctrl configuration nodes for Hi6220
 - Add spi related nodes for Hi6220
 - Add i2c nodes for Hi6220
 - Add i2c nodes to work with mezzanine boards
 - Add usb nodes for Hi6220
 - Add mailobx node for Hi6220
 - Add SRAM node and stub clock node for Hi6220
 - Add pinctrl nodes for uarts and enable them
 - Add LED nodes for hi6220-hikey board
 - Add hi655x pmic node for Hi6220
 - Add dwmmc nodes for Hi6220
 - Add wifi nodes support for Hi6220-Hikey board
 - Register thermal sensor for Hi6220
 - Register Hi6220's thermal zone for power allocator
 - Add L2 cache topology for Hi6220
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXERKpAAoJEAvIV27ZiWZcrjQP/iaj3zzSDcdHwGGbZsPXK/bt
 VHtqmtrWazXy5DIgA/4voHT3aYiHWVgmqCtl5kFs9X6SRDaqZXmMTAJPAiuBjs8s
 HMArHopgV/cmpGbg/ex4PxQqhj0TEOS6kiTl6roYlWnbNvOvHDpePWbS44grDqT+
 2q5hvm2xe9DVG3iEz5rlpBx42j+e7bH7LNiysToDXwb6PblKq+/o3PlkQKBQ7fyF
 9eGCI1az6iMNdGNicuHjU4olri6XcqCAeccO3Nh0nnuXOfEip1dIngT2vLc9IXVV
 J2L9xZ7oiJkgofAzve3sTkZbHsQIL9UmIiL1JNZycrQJyjjjk9VtUxuzD3yLOaPI
 8GJpIkccoAGQdMwFsRDT7fQW1qmtSxs5mMzhkGfeD2gAjTcWA0H+Pn7hjb0AQHDf
 wot1aKkGfoRl+PPF7j6DaHe4Gd2oU+6R89Z3e4ZzVlLzt11Hijm4yMs7h2sXKpAe
 39+FglMPEHLW2RFNBXNz3Fu4dUcWIgTWHU333Jjvs0Wj7O7er8L0xwkA91PRH+E8
 n86n7pYv2LnpDHxZ7yi5DYXNojIfxPIDyZgJK0NYgFi5E0iKCBJ9KNulzIWDqLve
 Llm0x8xA3VPBbxXeF4OZQ4w1IeTmwGEXOSnIlGIUmaouoPFpyxt8Ex8FKPlEBblB
 Ke+fFwAIZFYHnhJVXVHN
 =MpZ0
 -----END PGP SIGNATURE-----

Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64

Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu

- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220

* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Add L2 cache topology to Hi6220
  arm64: dts: register Hi6220's thermal zone for power allocator
  arm64: dts: register Hi6220's thermal sensor
  arm64: dts: add wifi nodes support for hi6220-hikey
  arm64: dts: add dwmmc nodes for hi6220
  arm64: dts: hikey: Add hi655x pmic dts node
  arm64: dts: add LED nodes for hi6220-hikey
  arm64: dts: hi6220: add pinctrl for uarts and enable them
  arm64: dts: add Hi6220's stub clock node
  arm64: dts: add mailbox node for Hi6220
  arm64: dts: Add hi6220 usb node
  arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
  arm64: dts: add all hi6220 i2c nodes
  arm64: dts: add Hi6220 spi configuration nodes
  arm64: dts: add Hi6220 pinctrl configuration nodes
  arm64: dts: Add Hi6220 gpio configuration nodes
  arm64: dts: enable idle states for Hi6220
  arm64: dts: add sp804 timer node for Hi6220
  arm64: dts: Reserve memory regions for hi6220
This commit is contained in:
Arnd Bergmann 2016-04-25 22:51:50 +02:00
commit 04136309a2
4 changed files with 1582 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

200
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
View File

@ -6,11 +6,9 @@
*/
/dts-v1/;
/*Reserved 1MB memory for MCU*/
/memreserve/ 0x05e00000 0x00100000;
#include "hi6220.dtsi"
#include "hikey-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "HiKey Development Board";
@ -27,9 +25,201 @@
stdout-path = "serial3:115200n8";
};
/*
* Reserve below regions from memory node:
*
* 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
* 0x06df,f000 - 0x06df,ffff: Mailbox message data
* 0x0740,f000 - 0x0740,ffff: MCU firmware section
* 0x3e00,0000 - 0x3fff,ffff: OP-TEE
*/
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
<0x00000000 0x05f00000 0x00000000 0x00eff000>,
<0x00000000 0x06e00000 0x00000000 0x0060f000>,
<0x00000000 0x07410000 0x00000000 0x36bf0000>;
};
soc {
spi0: spi@f7106000 {
status = "ok";
};
i2c0: i2c@f7100000 {
status = "ok";
};
i2c1: i2c@f7101000 {
status = "ok";
};
uart1: uart@f7111000 {
status = "ok";
};
uart2: uart@f7112000 {
status = "ok";
};
uart3: uart@f7113000 {
status = "ok";
};
dwmmc_2: dwmmc2@f723f000 {
ti,non-removable;
non-removable;
/* WL_EN */
vmmc-supply = <&wlan_en_reg>;
#address-cells = <0x1>;
#size-cells = <0x0>;
wlcore: wlcore@2 {
compatible = "ti,wl1835";
reg = <2>; /* sdio func num */
/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
};
};
wlan_en_reg: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* WLAN_EN GPIO */
gpio = <&gpio0 5 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
};
};
leds {
compatible = "gpio-leds";
user_led4 {
label = "user_led4";
gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
linux,default-trigger = "heartbeat";
};
user_led3 {
label = "user_led3";
gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
linux,default-trigger = "mmc0";
};
user_led2 {
label = "user_led2";
gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
linux,default-trigger = "mmc1";
};
user_led1 {
label = "user_led1";
gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
linux,default-trigger = "cpu0";
};
wlan_active_led {
label = "wifi_active";
gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
label = "bt_active";
gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
linux,default-trigger = "hci0rx";
default-state = "off";
};
};
pmic: pmic@f8000000 {
compatible = "hisilicon,hi655x-pmic";
reg = <0x0 0xf8000000 0x0 0x1000>;
interrupt-controller;
#interrupt-cells = <2>;
pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
regulators {
ldo2: LDO2 {
regulator-name = "LDO2_2V8";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3200000>;
regulator-enable-ramp-delay = <120>;
};
ldo7: LDO7 {
regulator-name = "LDO7_SDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <120>;
};
ldo10: LDO10 {
regulator-name = "LDO10_2V85";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <360>;
};
ldo13: LDO13 {
regulator-name = "LDO13_1V8";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1950000>;
regulator-enable-ramp-delay = <120>;
};
ldo14: LDO14 {
regulator-name = "LDO14_2V8";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3200000>;
regulator-enable-ramp-delay = <120>;
};
ldo15: LDO15 {
regulator-name = "LDO15_1V8";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
regulator-enable-ramp-delay = <120>;
};
ldo17: LDO17 {
regulator-name = "LDO17_2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3200000>;
regulator-enable-ramp-delay = <120>;
};
ldo19: LDO19 {
regulator-name = "LDO19_3V0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <360>;
};
ldo21: LDO21 {
regulator-name = "LDO21_1V8";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-enable-ramp-delay = <120>;
};
ldo22: LDO22 {
regulator-name = "LDO22_1V2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
regulator-enable-ramp-delay = <120>;
};
};
};
};

623
arch/arm64/boot/dts/hisilicon/hi6220.dtsi
View File

@ -6,6 +6,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi6220-clock.h>
#include <dt-bindings/pinctrl/hisi.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "hisilicon,hi6220";
@ -53,11 +55,42 @@
};
};
idle-states {
entry-method = "psci";
CPU_SLEEP: cpu-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <700>;
exit-latency-us = <250>;
min-residency-us = <1000>;
};
CLUSTER_SLEEP: cluster-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <1000>;
exit-latency-us = <700>;
min-residency-us = <2700>;
wakeup-latency-us = <1500>;
};
};
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cooling-min-level = <4>;
cooling-max-level = <0>;
#cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <311>;
};
cpu1: cpu@1 {
@ -65,6 +98,9 @@
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu2: cpu@2 {
@ -72,6 +108,9 @@
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu3: cpu@3 {
@ -79,6 +118,9 @@
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu4: cpu@100 {
@ -86,6 +128,9 @@
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu5: cpu@101 {
@ -93,6 +138,9 @@
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu6: cpu@102 {
@ -100,6 +148,9 @@
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu7: cpu@103 {
@ -107,6 +158,48 @@
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
CLUSTER0_L2: l2-cache0 {
compatible = "cache";
};
CLUSTER1_L2: l2-cache1 {
compatible = "cache";
};
};
cpu_opp_table: cpu_opp_table {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <208000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <500000>;
};
opp01 {
opp-hz = /bits/ 64 <432000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <500000>;
};
opp02 {
opp-hz = /bits/ 64 <729000000>;
opp-microvolt = <1090000>;
clock-latency-ns = <500000>;
};
opp03 {
opp-hz = /bits/ 64 <960000000>;
opp-microvolt = <1180000>;
clock-latency-ns = <500000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1330000>;
clock-latency-ns = <500000>;
};
};
@ -137,6 +230,11 @@
#size-cells = <2>;
ranges;
sram: sram@fff80000 {
compatible = "hisilicon,hi6220-sramctrl", "syscon";
reg = <0x0 0xfff80000 0x0 0x12000>;
};
ao_ctrl: ao_ctrl@f7800000 {
compatible = "hisilicon,hi6220-aoctrl", "syscon";
reg = <0x0 0xf7800000 0x0 0x2000>;
@ -162,6 +260,14 @@
#clock-cells = <1>;
};
stub_clock: stub_clock {
compatible = "hisilicon,hi6220-stub-clk";
hisilicon,hi6220-clk-sram = <&sram>;
#clock-cells = <1>;
mbox-names = "mbox-tx";
mboxes = <&mailbox 1 0 11>;
};
uart0: uart@f8015000 { /* console */
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
@ -178,6 +284,8 @@
clocks = <&sys_ctrl HI6220_UART1_PCLK>,
<&sys_ctrl HI6220_UART1_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>;
status = "disabled";
};
@ -188,6 +296,8 @@
clocks = <&sys_ctrl HI6220_UART2_PCLK>,
<&sys_ctrl HI6220_UART2_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
status = "disabled";
};
@ -198,6 +308,9 @@
clocks = <&sys_ctrl HI6220_UART3_PCLK>,
<&sys_ctrl HI6220_UART3_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
status = "disabled";
};
uart4: uart@f7114000 {
@ -207,7 +320,517 @@
clocks = <&sys_ctrl HI6220_UART4_PCLK>,
<&sys_ctrl HI6220_UART4_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
status = "disabled";
};
dual_timer0: timer@f8008000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xf8008000 0x0 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ao_ctrl HI6220_TIMER0_PCLK>,
<&ao_ctrl HI6220_TIMER0_PCLK>,
<&ao_ctrl HI6220_TIMER0_PCLK>;
clock-names = "timer1", "timer2", "apb_pclk";
};
pmx0: pinmux@f7010000 {
compatible = "pinctrl-single";
reg = <0x0 0xf7010000 0x0 0x27c>;
#address-cells = <1>;
#size-cells = <1>;
#gpio-range-cells = <3>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <7>;
pinctrl-single,gpio-range = <
&range 80 8 MUX_M0 /* gpio 3: [0..7] */
&range 88 8 MUX_M0 /* gpio 4: [0..7] */
&range 96 8 MUX_M0 /* gpio 5: [0..7] */
&range 104 8 MUX_M0 /* gpio 6: [0..7] */
&range 112 8 MUX_M0 /* gpio 7: [0..7] */
&range 120 2 MUX_M0 /* gpio 8: [0..1] */
&range 2 6 MUX_M1 /* gpio 8: [2..7] */
&range 8 8 MUX_M1 /* gpio 9: [0..7] */
&range 0 1 MUX_M1 /* gpio 10: [0] */
&range 16 7 MUX_M1 /* gpio 10: [1..7] */
&range 23 3 MUX_M1 /* gpio 11: [0..2] */
&range 28 5 MUX_M1 /* gpio 11: [3..7] */
&range 33 3 MUX_M1 /* gpio 12: [0..2] */
&range 43 5 MUX_M1 /* gpio 12: [3..7] */
&range 48 8 MUX_M1 /* gpio 13: [0..7] */
&range 56 8 MUX_M1 /* gpio 14: [0..7] */
&range 74 6 MUX_M1 /* gpio 15: [0..5] */
&range 122 1 MUX_M1 /* gpio 15: [6] */
&range 126 1 MUX_M1 /* gpio 15: [7] */
&range 127 8 MUX_M1 /* gpio 16: [0..7] */
&range 135 8 MUX_M1 /* gpio 17: [0..7] */
&range 143 8 MUX_M1 /* gpio 18: [0..7] */
&range 151 8 MUX_M1 /* gpio 19: [0..7] */
>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
};
pmx1: pinmux@f7010800 {
compatible = "pinconf-single";
reg = <0x0 0xf7010800 0x0 0x28c>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl-single,register-width = <32>;
};
pmx2: pinmux@f8001800 {
compatible = "pinconf-single";
reg = <0x0 0xf8001800 0x0 0x78>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl-single,register-width = <32>;
};
gpio0: gpio@f8011000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf8011000 0x0 0x1000>;
interrupts = <0 52 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio1: gpio@f8012000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf8012000 0x0 0x1000>;
interrupts = <0 53 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio2: gpio@f8013000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf8013000 0x0 0x1000>;
interrupts = <0 54 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio3: gpio@f8014000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf8014000 0x0 0x1000>;
interrupts = <0 55 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 80 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio4: gpio@f7020000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7020000 0x0 0x1000>;
interrupts = <0 56 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 88 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio5: gpio@f7021000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7021000 0x0 0x1000>;
interrupts = <0 57 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 96 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio6: gpio@f7022000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7022000 0x0 0x1000>;
interrupts = <0 58 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 104 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio7: gpio@f7023000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7023000 0x0 0x1000>;
interrupts = <0 59 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 112 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio8: gpio@f7024000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7024000 0x0 0x1000>;
interrupts = <0 60 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio9: gpio@f7025000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7025000 0x0 0x1000>;
interrupts = <0 61 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 8 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio10: gpio@f7026000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7026000 0x0 0x1000>;
interrupts = <0 62 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio11: gpio@f7027000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7027000 0x0 0x1000>;
interrupts = <0 63 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio12: gpio@f7028000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7028000 0x0 0x1000>;
interrupts = <0 64 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio13: gpio@f7029000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf7029000 0x0 0x1000>;
interrupts = <0 65 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 48 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio14: gpio@f702a000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702a000 0x0 0x1000>;
interrupts = <0 66 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 56 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio15: gpio@f702b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702b000 0x0 0x1000>;
interrupts = <0 67 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <
&pmx0 0 74 6
&pmx0 6 122 1
&pmx0 7 126 1
>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio16: gpio@f702c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702c000 0x0 0x1000>;
interrupts = <0 68 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 127 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio17: gpio@f702d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702d000 0x0 0x1000>;
interrupts = <0 69 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 135 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio18: gpio@f702e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702e000 0x0 0x1000>;
interrupts = <0 70 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 143 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
gpio19: gpio@f702f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf702f000 0x0 0x1000>;
interrupts = <0 71 0x4>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 151 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
spi0: spi@f7106000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xf7106000 0x0 0x1000>;
interrupts = <0 50 4>;
bus-id = <0>;
enable-dma = <0>;
clocks = <&sys_ctrl HI6220_SPI_CLK>;
clock-names = "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
num-cs = <1>;
cs-gpios = <&gpio6 2 0>;
status = "disabled";
};
i2c0: i2c@f7100000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xf7100000 0x0 0x1000>;
interrupts = <0 44 4>;
clocks = <&sys_ctrl HI6220_I2C0_CLK>;
i2c-sda-hold-time-ns = <300>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
status = "disabled";
};
i2c1: i2c@f7101000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xf7101000 0x0 0x1000>;
clocks = <&sys_ctrl HI6220_I2C1_CLK>;
interrupts = <0 45 4>;
i2c-sda-hold-time-ns = <300>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
status = "disabled";
};
i2c2: i2c@f7102000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xf7102000 0x0 0x1000>;
clocks = <&sys_ctrl HI6220_I2C2_CLK>;
interrupts = <0 46 4>;
i2c-sda-hold-time-ns = <300>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
status = "disabled";
};
fixed_5v_hub: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed_5v_hub";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
gpio = <&gpio0 7 0>;
regulator-always-on;
};
usb_phy: usbphy {
compatible = "hisilicon,hi6220-usb-phy";
#phy-cells = <0>;
phy-supply = <&fixed_5v_hub>;
hisilicon,peripheral-syscon = <&sys_ctrl>;
};
usb: usb@f72c0000 {
compatible = "hisilicon,hi6220-usb";
reg = <0x0 0xf72c0000 0x0 0x40000>;
phys = <&usb_phy>;
phy-names = "usb2-phy";
clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
clock-names = "otg";
dr_mode = "otg";
g-use-dma;
g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 128 128 128 128>;
interrupts = <0 77 0x4>;
};
mailbox: mailbox@f7510000 {
compatible = "hisilicon,hi6220-mbox";
reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
<0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <3>;
};
dwmmc_0: dwmmc0@f723d000 {
compatible = "hisilicon,hi6220-dw-mshc";
num-slots = <0x1>;
cap-mmc-highspeed;
non-removable;
reg = <0x0 0xf723d000 0x0 0x1000>;
interrupts = <0x0 0x48 0x4>;
clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
clock-names = "ciu", "biu";
bus-width = <0x8>;
vmmc-supply = <&ldo19>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
&emmc_cfg_func &emmc_rst_cfg_func>;
};
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
num-slots = <0x1>;
card-detect-delay = <200>;
hisilicon,peripheral-syscon = <&ao_ctrl>;
cap-sd-highspeed;
reg = <0x0 0xf723e000 0x0 0x1000>;
interrupts = <0x0 0x49 0x4>;
#address-cells = <0x1>;
#size-cells = <0x0>;
clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
clock-names = "ciu", "biu";
vqmmc-supply = <&ldo7>;
vmmc-supply = <&ldo10>;
bus-width = <0x4>;
disable-wp;
cd-gpios = <&gpio1 0 1>;
pinctrl-names = "default", "idle";
pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
};
dwmmc_2: dwmmc2@f723f000 {
compatible = "hisilicon,hi6220-dw-mshc";
num-slots = <0x1>;
reg = <0x0 0xf723f000 0x0 0x1000>;
interrupts = <0x0 0x4a 0x4>;
clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
clock-names = "ciu", "biu";
bus-width = <0x4>;
broken-cd;
pinctrl-names = "default", "idle";
pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
};
tsensor: tsensor@0,f7030700 {
compatible = "hisilicon,tsensor";
reg = <0x0 0xf7030700 0x0 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_ctrl 22>;
clock-names = "thermal_clk";
#thermal-sensor-cells = <1>;
};
thermal-zones {
cls0: cls0 {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <3326>;
/* sensor ID */
thermal-sensors = <&tsensor 2>;
trips {
threshold: trip-point@0 {
temperature = <65000>;
hysteresis = <0>;
type = "passive";
};
target: trip-point@1 {
temperature = <75000>;
hysteresis = <0>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&target>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
};
};

705
arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi Normal file
View File

@ -0,0 +1,705 @@
/*
* pinctrl dts fils for Hislicon HiKey development board
*
*/
#include <dt-bindings/pinctrl/hisi.h>
/ {
soc {
pmx0: pinmux@f7010000 {
pinctrl-names = "default";
pinctrl-0 = <
&boot_sel_pmx_func
&hkadc_ssi_pmx_func
&codec_clk_pmx_func
&pwm_in_pmx_func
&bl_pwm_pmx_func
>;
boot_sel_pmx_func: boot_sel_pmx_func {
pinctrl-single,pins = <
0x0 MUX_M0 /* BOOT_SEL (IOMG000) */
>;
};
emmc_pmx_func: emmc_pmx_func {
pinctrl-single,pins = <
0x100 MUX_M0 /* EMMC_CLK (IOMG064) */
0x104 MUX_M0 /* EMMC_CMD (IOMG065) */
0x108 MUX_M0 /* EMMC_DATA0 (IOMG066) */
0x10c MUX_M0 /* EMMC_DATA1 (IOMG067) */
0x110 MUX_M0 /* EMMC_DATA2 (IOMG068) */
0x114 MUX_M0 /* EMMC_DATA3 (IOMG069) */
0x118 MUX_M0 /* EMMC_DATA4 (IOMG070) */
0x11c MUX_M0 /* EMMC_DATA5 (IOMG071) */
0x120 MUX_M0 /* EMMC_DATA6 (IOMG072) */
0x124 MUX_M0 /* EMMC_DATA7 (IOMG073) */
>;
};
sd_pmx_func: sd_pmx_func {
pinctrl-single,pins = <
0xc MUX_M0 /* SD_CLK (IOMG003) */
0x10 MUX_M0 /* SD_CMD (IOMG004) */
0x14 MUX_M0 /* SD_DATA0 (IOMG005) */
0x18 MUX_M0 /* SD_DATA1 (IOMG006) */
0x1c MUX_M0 /* SD_DATA2 (IOMG007) */
0x20 MUX_M0 /* SD_DATA3 (IOMG008) */
>;
};
sd_pmx_idle: sd_pmx_idle {
pinctrl-single,pins = <
0xc MUX_M1 /* SD_CLK (IOMG003) */
0x10 MUX_M1 /* SD_CMD (IOMG004) */
0x14 MUX_M1 /* SD_DATA0 (IOMG005) */
0x18 MUX_M1 /* SD_DATA1 (IOMG006) */
0x1c MUX_M1 /* SD_DATA2 (IOMG007) */
0x20 MUX_M1 /* SD_DATA3 (IOMG008) */
>;
};
sdio_pmx_func: sdio_pmx_func {
pinctrl-single,pins = <
0x128 MUX_M0 /* SDIO_CLK (IOMG074) */
0x12c MUX_M0 /* SDIO_CMD (IOMG075) */
0x130 MUX_M0 /* SDIO_DATA0 (IOMG076) */
0x134 MUX_M0 /* SDIO_DATA1 (IOMG077) */
0x138 MUX_M0 /* SDIO_DATA2 (IOMG078) */
0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */
>;
};
sdio_pmx_idle: sdio_pmx_idle {
pinctrl-single,pins = <
0x128 MUX_M1 /* SDIO_CLK (IOMG074) */
0x12c MUX_M1 /* SDIO_CMD (IOMG075) */
0x130 MUX_M1 /* SDIO_DATA0 (IOMG076) */
0x134 MUX_M1 /* SDIO_DATA1 (IOMG077) */
0x138 MUX_M1 /* SDIO_DATA2 (IOMG078) */
0x13c MUX_M1 /* SDIO_DATA3 (IOMG079) */
>;
};
isp_pmx_func: isp_pmx_func {
pinctrl-single,pins = <
0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */
0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */
0x2c MUX_M0 /* ISP_PWDN2 (IOMG011) */
0x30 MUX_M1 /* ISP_SHUTTER0 (IOMG012) */
0x34 MUX_M1 /* ISP_SHUTTER1 (IOMG013) */
0x38 MUX_M1 /* ISP_PWM (IOMG014) */
0x3c MUX_M0 /* ISP_CCLK0 (IOMG015) */
0x40 MUX_M0 /* ISP_CCLK1 (IOMG016) */
0x44 MUX_M0 /* ISP_RESETB0 (IOMG017) */
0x48 MUX_M0 /* ISP_RESETB1 (IOMG018) */
0x4c MUX_M1 /* ISP_STROBE0 (IOMG019) */
0x50 MUX_M1 /* ISP_STROBE1 (IOMG020) */
0x54 MUX_M0 /* ISP_SDA0 (IOMG021) */
0x58 MUX_M0 /* ISP_SCL0 (IOMG022) */
0x5c MUX_M0 /* ISP_SDA1 (IOMG023) */
0x60 MUX_M0 /* ISP_SCL1 (IOMG024) */
>;
};
hkadc_ssi_pmx_func: hkadc_ssi_pmx_func {
pinctrl-single,pins = <
0x68 MUX_M0 /* HKADC_SSI (IOMG026) */
>;
};
codec_clk_pmx_func: codec_clk_pmx_func {
pinctrl-single,pins = <
0x6c MUX_M0 /* CODEC_CLK (IOMG027) */
>;
};
codec_pmx_func: codec_pmx_func {
pinctrl-single,pins = <
0x70 MUX_M1 /* DMIC_CLK (IOMG028) */
0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */
0x78 MUX_M0 /* CODEC_DI (IOMG030) */
0x7c MUX_M0 /* CODEC_DO (IOMG031) */
>;
};
fm_pmx_func: fm_pmx_func {
pinctrl-single,pins = <
0x80 MUX_M1 /* FM_XCLK (IOMG032) */
0x84 MUX_M1 /* FM_XFS (IOMG033) */
0x88 MUX_M1 /* FM_DI (IOMG034) */
0x8c MUX_M1 /* FM_DO (IOMG035) */
>;
};
bt_pmx_func: bt_pmx_func {
pinctrl-single,pins = <
0x90 MUX_M0 /* BT_XCLK (IOMG036) */
0x94 MUX_M0 /* BT_XFS (IOMG037) */
0x98 MUX_M0 /* BT_DI (IOMG038) */
0x9c MUX_M0 /* BT_DO (IOMG039) */
>;
};
pwm_in_pmx_func: pwm_in_pmx_func {
pinctrl-single,pins = <
0xb8 MUX_M1 /* PWM_IN (IOMG046) */
>;
};
bl_pwm_pmx_func: bl_pwm_pmx_func {
pinctrl-single,pins = <
0xbc MUX_M1 /* BL_PWM (IOMG047) */
>;
};
uart0_pmx_func: uart0_pmx_func {
pinctrl-single,pins = <
0xc0 MUX_M0 /* UART0_RXD (IOMG048) */
0xc4 MUX_M0 /* UART0_TXD (IOMG049) */
>;
};
uart1_pmx_func: uart1_pmx_func {
pinctrl-single,pins = <
0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */
0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */
0xd0 MUX_M0 /* UART1_RXD (IOMG052) */
0xd4 MUX_M0 /* UART1_TXD (IOMG053) */
>;
};
uart2_pmx_func: uart2_pmx_func {
pinctrl-single,pins = <
0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */
0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */
0xe0 MUX_M0 /* UART2_RXD (IOMG056) */
0xe4 MUX_M0 /* UART2_TXD (IOMG057) */
>;
};
uart3_pmx_func: uart3_pmx_func {
pinctrl-single,pins = <
0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */
0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */
0x188 MUX_M1 /* UART3_RXD (IOMG098) */
0x18c MUX_M1 /* UART3_TXD (IOMG099) */
>;
};
uart4_pmx_func: uart4_pmx_func {
pinctrl-single,pins = <
0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */
0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */
0x1d8 MUX_M1 /* UART4_RXD (IOMG118) */
0x1dc MUX_M1 /* UART4_TXD (IOMG119) */
>;
};
uart5_pmx_func: uart5_pmx_func {
pinctrl-single,pins = <
0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */
0x1cc MUX_M1 /* UART5_TXD (IOMG115) */
>;
};
i2c0_pmx_func: i2c0_pmx_func {
pinctrl-single,pins = <
0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */
0xec MUX_M0 /* I2C0_SDA (IOMG059) */
>;
};
i2c1_pmx_func: i2c1_pmx_func {
pinctrl-single,pins = <
0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */
0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */
>;
};
i2c2_pmx_func: i2c2_pmx_func {
pinctrl-single,pins = <
0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */
0xfc MUX_M0 /* I2C2_SDA (IOMG063) */
>;
};
spi0_pmx_func: spi0_pmx_func {
pinctrl-single,pins = <
0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */
0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */
0x1a8 MUX_M1 /* SPI0_CS_N (IOMG106) */
0x1ac MUX_M1 /* SPI0_CLK (IOMG107) */
>;
};
};
pmx1: pinmux@f7010800 {
pinctrl-names = "default";
pinctrl-0 = <
&boot_sel_cfg_func
&hkadc_ssi_cfg_func
&codec_clk_cfg_func
&pwm_in_cfg_func
&bl_pwm_cfg_func
>;
boot_sel_cfg_func: boot_sel_cfg_func {
pinctrl-single,pins = <
0x0 0x0 /* BOOT_SEL (IOCFG000) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
hkadc_ssi_cfg_func: hkadc_ssi_cfg_func {
pinctrl-single,pins = <
0x6c 0x0 /* HKADC_SSI (IOCFG027) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
emmc_clk_cfg_func: emmc_clk_cfg_func {
pinctrl-single,pins = <
0x104 0x0 /* EMMC_CLK (IOCFG065) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
};
emmc_cfg_func: emmc_cfg_func {
pinctrl-single,pins = <
0x108 0x0 /* EMMC_CMD (IOCFG066) */
0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */
0x110 0x0 /* EMMC_DATA1 (IOCFG068) */
0x114 0x0 /* EMMC_DATA2 (IOCFG069) */
0x118 0x0 /* EMMC_DATA3 (IOCFG070) */
0x11c 0x0 /* EMMC_DATA4 (IOCFG071) */
0x120 0x0 /* EMMC_DATA5 (IOCFG072) */
0x124 0x0 /* EMMC_DATA6 (IOCFG073) */
0x128 0x0 /* EMMC_DATA7 (IOCFG074) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
emmc_rst_cfg_func: emmc_rst_cfg_func {
pinctrl-single,pins = <
0x12c 0x0 /* EMMC_RST_N (IOCFG075) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
sd_clk_cfg_func: sd_clk_cfg_func {
pinctrl-single,pins = <
0xc 0x0 /* SD_CLK (IOCFG003) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>;
};
sd_clk_cfg_idle: sd_clk_cfg_idle {
pinctrl-single,pins = <
0xc 0x0 /* SD_CLK (IOCFG003) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
sd_cfg_func: sd_cfg_func {
pinctrl-single,pins = <
0x10 0x0 /* SD_CMD (IOCFG004) */
0x14 0x0 /* SD_DATA0 (IOCFG005) */
0x18 0x0 /* SD_DATA1 (IOCFG006) */
0x1c 0x0 /* SD_DATA2 (IOCFG007) */
0x20 0x0 /* SD_DATA3 (IOCFG008) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
};
sd_cfg_idle: sd_cfg_idle {
pinctrl-single,pins = <
0x10 0x0 /* SD_CMD (IOCFG004) */
0x14 0x0 /* SD_DATA0 (IOCFG005) */
0x18 0x0 /* SD_DATA1 (IOCFG006) */
0x1c 0x0 /* SD_DATA2 (IOCFG007) */
0x20 0x0 /* SD_DATA3 (IOCFG008) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
sdio_clk_cfg_func: sdio_clk_cfg_func {
pinctrl-single,pins = <
0x134 0x0 /* SDIO_CLK (IOCFG077) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
};
sdio_clk_cfg_idle: sdio_clk_cfg_idle {
pinctrl-single,pins = <
0x134 0x0 /* SDIO_CLK (IOCFG077) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
sdio_cfg_func: sdio_cfg_func {
pinctrl-single,pins = <
0x138 0x0 /* SDIO_CMD (IOCFG078) */
0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */
0x140 0x0 /* SDIO_DATA1 (IOCFG080) */
0x144 0x0 /* SDIO_DATA2 (IOCFG081) */
0x148 0x0 /* SDIO_DATA3 (IOCFG082) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
sdio_cfg_idle: sdio_cfg_idle {
pinctrl-single,pins = <
0x138 0x0 /* SDIO_CMD (IOCFG078) */
0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */
0x140 0x0 /* SDIO_DATA1 (IOCFG080) */
0x144 0x0 /* SDIO_DATA2 (IOCFG081) */
0x148 0x0 /* SDIO_DATA3 (IOCFG082) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
isp_cfg_func1: isp_cfg_func1 {
pinctrl-single,pins = <
0x28 0x0 /* ISP_PWDN0 (IOCFG010) */
0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */
0x30 0x0 /* ISP_PWDN2 (IOCFG012) */
0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */
0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */
0x3c 0x0 /* ISP_PWM (IOCFG015) */
0x40 0x0 /* ISP_CCLK0 (IOCFG016) */
0x44 0x0 /* ISP_CCLK1 (IOCFG017) */
0x48 0x0 /* ISP_RESETB0 (IOCFG018) */
0x4c 0x0 /* ISP_RESETB1 (IOCFG019) */
0x50 0x0 /* ISP_STROBE0 (IOCFG020) */
0x58 0x0 /* ISP_SDA0 (IOCFG022) */
0x5c 0x0 /* ISP_SCL0 (IOCFG023) */
0x60 0x0 /* ISP_SDA1 (IOCFG024) */
0x64 0x0 /* ISP_SCL1 (IOCFG025) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
isp_cfg_idle1: isp_cfg_idle1 {
pinctrl-single,pins = <
0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */
0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
isp_cfg_func2: isp_cfg_func2 {
pinctrl-single,pins = <
0x54 0x0 /* ISP_STROBE1 (IOCFG021) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
codec_clk_cfg_func: codec_clk_cfg_func {
pinctrl-single,pins = <
0x70 0x0 /* CODEC_CLK (IOCFG028) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
codec_clk_cfg_idle: codec_clk_cfg_idle {
pinctrl-single,pins = <
0x70 0x0 /* CODEC_CLK (IOCFG028) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
codec_cfg_func1: codec_cfg_func1 {
pinctrl-single,pins = <
0x74 0x0 /* DMIC_CLK (IOCFG029) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
codec_cfg_func2: codec_cfg_func2 {
pinctrl-single,pins = <
0x78 0x0 /* CODEC_SYNC (IOCFG030) */
0x7c 0x0 /* CODEC_DI (IOCFG031) */
0x80 0x0 /* CODEC_DO (IOCFG032) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
codec_cfg_idle2: codec_cfg_idle2 {
pinctrl-single,pins = <
0x78 0x0 /* CODEC_SYNC (IOCFG030) */
0x7c 0x0 /* CODEC_DI (IOCFG031) */
0x80 0x0 /* CODEC_DO (IOCFG032) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
fm_cfg_func: fm_cfg_func {
pinctrl-single,pins = <
0x84 0x0 /* FM_XCLK (IOCFG033) */
0x88 0x0 /* FM_XFS (IOCFG034) */
0x8c 0x0 /* FM_DI (IOCFG035) */
0x90 0x0 /* FM_DO (IOCFG036) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
bt_cfg_func: bt_cfg_func {
pinctrl-single,pins = <
0x94 0x0 /* BT_XCLK (IOCFG037) */
0x98 0x0 /* BT_XFS (IOCFG038) */
0x9c 0x0 /* BT_DI (IOCFG039) */
0xa0 0x0 /* BT_DO (IOCFG040) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
bt_cfg_idle: bt_cfg_idle {
pinctrl-single,pins = <
0x94 0x0 /* BT_XCLK (IOCFG037) */
0x98 0x0 /* BT_XFS (IOCFG038) */
0x9c 0x0 /* BT_DI (IOCFG039) */
0xa0 0x0 /* BT_DO (IOCFG040) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
pwm_in_cfg_func: pwm_in_cfg_func {
pinctrl-single,pins = <
0xbc 0x0 /* PWM_IN (IOCFG047) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
bl_pwm_cfg_func: bl_pwm_cfg_func {
pinctrl-single,pins = <
0xc0 0x0 /* BL_PWM (IOCFG048) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart0_cfg_func1: uart0_cfg_func1 {
pinctrl-single,pins = <
0xc4 0x0 /* UART0_RXD (IOCFG049) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart0_cfg_func2: uart0_cfg_func2 {
pinctrl-single,pins = <
0xc8 0x0 /* UART0_TXD (IOCFG050) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
};
uart1_cfg_func1: uart1_cfg_func1 {
pinctrl-single,pins = <
0xcc 0x0 /* UART1_CTS_N (IOCFG051) */
0xd4 0x0 /* UART1_RXD (IOCFG053) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart1_cfg_func2: uart1_cfg_func2 {
pinctrl-single,pins = <
0xd0 0x0 /* UART1_RTS_N (IOCFG052) */
0xd8 0x0 /* UART1_TXD (IOCFG054) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart2_cfg_func: uart2_cfg_func {
pinctrl-single,pins = <
0xdc 0x0 /* UART2_CTS_N (IOCFG055) */
0xe0 0x0 /* UART2_RTS_N (IOCFG056) */
0xe4 0x0 /* UART2_RXD (IOCFG057) */
0xe8 0x0 /* UART2_TXD (IOCFG058) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart3_cfg_func: uart3_cfg_func {
pinctrl-single,pins = <
0x190 0x0 /* UART3_CTS_N (IOCFG100) */
0x194 0x0 /* UART3_RTS_N (IOCFG101) */
0x198 0x0 /* UART3_RXD (IOCFG102) */
0x19c 0x0 /* UART3_TXD (IOCFG103) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart4_cfg_func: uart4_cfg_func {
pinctrl-single,pins = <
0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */
0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */
0x1e8 0x0 /* UART4_RXD (IOCFG122) */
0x1ec 0x0 /* UART4_TXD (IOCFG123) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
uart5_cfg_func: uart5_cfg_func {
pinctrl-single,pins = <
0x1d8 0x0 /* UART4_RXD (IOCFG118) */
0x1dc 0x0 /* UART4_TXD (IOCFG119) */
>;
pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
i2c0_cfg_func: i2c0_cfg_func {
pinctrl-single,pins = <
0xec 0x0 /* I2C0_SCL (IOCFG059) */
0xf0 0x0 /* I2C0_SDA (IOCFG060) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
i2c1_cfg_func: i2c1_cfg_func {
pinctrl-single,pins = <
0xf4 0x0 /* I2C1_SCL (IOCFG061) */
0xf8 0x0 /* I2C1_SDA (IOCFG062) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
i2c2_cfg_func: i2c2_cfg_func {
pinctrl-single,pins = <
0xfc 0x0 /* I2C2_SCL (IOCFG063) */
0x100 0x0 /* I2C2_SDA (IOCFG064) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
spi0_cfg_func: spi0_cfg_func {
pinctrl-single,pins = <
0x1b0 0x0 /* SPI0_DI (IOCFG108) */
0x1b4 0x0 /* SPI0_DO (IOCFG109) */
0x1b8 0x0 /* SPI0_CS_N (IOCFG110) */
0x1bc 0x0 /* SPI0_CLK (IOCFG111) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
};
pmx2: pinmux@f8001800 {
pinctrl-names = "default";
pinctrl-0 = <
&rstout_n_cfg_func
>;
rstout_n_cfg_func: rstout_n_cfg_func {
pinctrl-single,pins = <
0x0 0x0 /* RSTOUT_N (IOCFG000) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
pmu_peri_en_cfg_func: pmu_peri_en_cfg_func {
pinctrl-single,pins = <
0x4 0x0 /* PMU_PERI_EN (IOCFG001) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
sysclk0_en_cfg_func: sysclk0_en_cfg_func {
pinctrl-single,pins = <
0x8 0x0 /* SYSCLK0_EN (IOCFG002) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
jtag_tdo_cfg_func: jtag_tdo_cfg_func {
pinctrl-single,pins = <
0xc 0x0 /* JTAG_TDO (IOCFG003) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
};
rf_reset_cfg_func: rf_reset_cfg_func {
pinctrl-single,pins = <
0x70 0x0 /* RF_RESET0 (IOCFG028) */
0x74 0x0 /* RF_RESET1 (IOCFG029) */
>;
pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>;
pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>;
pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
};
};
};
};

59
include/dt-bindings/pinctrl/hisi.h Normal file
View File

@ -0,0 +1,59 @@
/*
* This header provides constants for hisilicon pinctrl bindings.
*
* Copyright (c) 2015 Hisilicon Limited.
* Copyright (c) 2015 Linaro Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _DT_BINDINGS_PINCTRL_HISI_H
#define _DT_BINDINGS_PINCTRL_HISI_H
/* iomg bit definition */
#define MUX_M0 0
#define MUX_M1 1
#define MUX_M2 2
#define MUX_M3 3
#define MUX_M4 4
#define MUX_M5 5
#define MUX_M6 6
#define MUX_M7 7
/* iocg bit definition */
#define PULL_MASK (3)
#define PULL_DIS (0)
#define PULL_UP (1 << 0)
#define PULL_DOWN (1 << 1)
/* drive strength definition */
#define DRIVE_MASK (7 << 4)
#define DRIVE1_02MA (0 << 4)
#define DRIVE1_04MA (1 << 4)
#define DRIVE1_08MA (2 << 4)
#define DRIVE1_10MA (3 << 4)
#define DRIVE2_02MA (0 << 4)
#define DRIVE2_04MA (1 << 4)
#define DRIVE2_08MA (2 << 4)
#define DRIVE2_10MA (3 << 4)
#define DRIVE3_04MA (0 << 4)
#define DRIVE3_08MA (1 << 4)
#define DRIVE3_12MA (2 << 4)
#define DRIVE3_16MA (3 << 4)
#define DRIVE3_20MA (4 << 4)
#define DRIVE3_24MA (5 << 4)
#define DRIVE3_32MA (6 << 4)
#define DRIVE3_40MA (7 << 4)
#define DRIVE4_02MA (0 << 4)
#define DRIVE4_04MA (2 << 4)
#define DRIVE4_08MA (4 << 4)
#define DRIVE4_10MA (6 << 4)
#endif