Upcoming patches require calling get_nvmeq when we don't have a namespace.
Some callers already have the device in a local variable anyway.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Instead of encoding the handler type in the bottom two bits of the
per-completion context pointer, store the handler function as well
as the context pointer. This gives us more flexibility and the code
is clearer. It comes at the cost of an extra 8k of memory per queue,
but this feels like a reasonable price to pay.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The driver was still using an old definition of Identify Controller
which only came to light once we started using the 'number of namespaces'
field properly.
Reported-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Reported-by: Khosrow Panah <Khosrow.Panah@idt.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The doorbell stride allows devices to spread out their doorbells instead
of packing them tightly. This feature was added as part of ECN 003.
This patch also enables support for more than 512 queues :-)
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
ECN 001 documented that namespace 0 is not valid. Sending an Identify
with CNS of 0 and Namespace of 0 is an undefined command.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The existing calculation underestimated the number of pages required
as it did not take into account the pointer at the end of each page.
The replacement calculation may overestimate the number of pages required
if the last page in the PRP List is entirely full. By using ->npages
as a counter as we fill in the pages, we ensure that we don't try to
free a page that was never allocated.
Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Instead of open-coding calls to nvme_submit_admin_cmd, these
small wrappers are simpler to use (the patch removes 14 lines from
nvme_dev_add() for example).
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
dma_unmap_sg() must be called with the same 'nents' passed to
dma_map_sg(), not the number returned from dma_map_sg().
Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Our SG list was constructed to always fill the entire first page, even
if that was more than the length of the I/O. This is probably harmless,
but some IOMMUs might do something bad.
Correcting the first call to sg_set_page() made it look a lot closer to
the sg_set_page() in the loop, so fold the first call to sg_set_page()
into the loop.
Reported-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Remove the special-purpose IDENTIFY, GET_RANGE_TYPE, DOWNLOAD_FIRMWARE
and ACTIVATE_FIRMWARE commands. Replace them with a generic ADMIN_CMD
ioctl that can submit any admin command.
Add a new ID ioctl that returns the namespace ID of the queried device.
It corresponds to the SCSI Idlun ioctl.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
If the I/O was not completed by a single NVMe command, we add the
bio to the congestion list and wake up the kthread to resubmit it.
But the kthread calls remove_wait_queue() unconditionally, which
will oops if it's not on the wait queue. So add the kthread to
the wait queue before waking it up.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
nvme_setup_io_queues() was assuming that a NULL return from
nvme_create_queue() was an out-of-memory error. That's not necessarily
true; the adapter might return -EIO, for example. Change the calling
convention to return an ERR_PTR on failure instead of NULL.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
For the benefit of reviewers, add comments to a few functions describing
their calling context
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
If any of the memory allocations in nvme_setup_prps fail, handle it by
modifying the passed-in data length to reflect the number of bytes we are
actually able to send. Also allow the caller to specify the GFP flags
they need; for user-initiated commands, we can use GFP_KERNEL allocations.
The various callers are updated to handle this possibility; the main
I/O path is already prepared for this possibility (as it may happen
due to nvme_map_bio being unable to map all the segments of the I/O).
The other callers return -ENOMEM instead of doing partial I/Os.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The current approach of using the namespace ID as the minor number
doesn't work when there are multiple adapters in the machine. Rather
than statically partitioning the number of namespaces between adapters,
dynamically allocate minor numbers to namespaces as they are detected.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The trailing '_data' on the end was annoying and inconsistent. Also, make
it actually return the data since this is needed for timing out commands.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
When an I/O completed with an error, we would call bio_endio twice
(once with -EIO and once with 0). Found by inspection.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
THe device reports (in its capability register) how long it will take
to initialise. If that time elapses before the ready bit becomes set,
conclude the device is broken and refuse to initialise it. Log a nice
error message so the user knows why we did nothing.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
We need to clear the affinity mask before calling free_irq()
Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The arbitration field was extended by one bit, shifting the shutdown
notification bits by one. Also, the SQ/CQ entry size was made
configurable for future extensions.
Reported-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The read and write commands don't define a 'result', so there's no need
to copy it back to userspace.
Remove the ability of the ioctl to submit commands to a different
namespace; it's just asking for trouble, and the use case I have in mind
will be addressed througha different ioctl in the future. That removes
the need for both the block_shift and nsid arguments.
Check that the opcode is one of 'read' or 'write'. Future opcodes may
be added in the future, but we will need a different structure definition
for them.
The nblocks field is redefined to be 0-based. This allows the user to
request the full 65536 blocks.
Don't byteswap the reftag, apptag and appmask. Martin Petersen tells
me these are calculated in big-endian and are transmitted to the device
in big-endian.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
NVME_IOCTL_SUBMIT_IO has a struct nvme_user_io, not a struct nvme_rw_command
as a parameter, and NVME_IOCTL_DOWNLOAD_FW is a Write, not a Read.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Make ioctls work for 32-bit applications on 64-bit kernels. The structures
are defined to be the same for both 32- and 64-bit applications, so
we can use the same handler for both.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Fill in all the num_possible_cpus() entries with duplicate pointers.
This reduces the complexity of the frequently-called get_nvmeq(), as
well as avoiding a bug in it when there are fewer queues than CPUs.
Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Once there are no more bios on the congestion list, we can stop waking
up the nvme kthread every time a completion happens.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
If the last element in the PRP list fits on the end of the page, there's
no need to allocate an extra page to put that single element in. It can
fit on the end of the page.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The spec says this is a 0s based value. We don't need to handle the
maximal value because it's reserved to mean "every namespace".
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The head can never overrun the tail since we won't allocate enough command
IDs to let that happen. The status codes are in sync with the spec.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The spec says we're not allowed to completely fill the submission queue.
Solve this by reducing the number of allocatable cmdids by 1.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
When we submit subsequent portions of the I/O, we need to access the
updated block, not start reading again from the original position.
This was showing up as miscompares in the XFS randholes testcase.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
NVMe scatterlists must be virtually contiguous, like almost all I/Os.
However, when the filesystem lays out files with a hole, it can be that
adjacent LBAs map to non-adjacent virtual addresses. Handle this by
submitting one NVMe command at a time for each virtually discontiguous
range.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Linux implements Flush as a bit in the bio. That means there may also be
data associated with the flush; if so the flush should be sent before the
data. To avoid completing the bio twice, I add CMD_CTX_FLUSH to indicate
the completion routine should do nothing.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The value written to the doorbell needs to be the first free index in
the queue, not the most recently used index in the queue.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
If interrupts are misconfigured, the kthread will be needed to process
admin queue completions.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
I got confused about whether this included the admin queue or not, and
had to resort to reading the spec. It doesn't include the admin queue,
so make that clear in the name.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Instead of trying to resubmit I/Os in the I/O completion path (in
interrupt context), wake up a kthread which will resubmit I/O from
user context. This allows mke2fs to run to completion.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
