Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.
At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.
Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.
Another benefit of doing this is that we can also move the
records around; sort them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.
Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.
If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When gcc inlines a function, it does not mark it with the mcount
prologue, which in turn means that inlined functions are not traced
by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then
gcc is allowed not to inline a function that is marked inline.
Depending on the options and the compiler, a function may or may
not be traced by the function tracer, depending on whether gcc
decides to inline a function or not. This has caused several
problems in the pass becaues gcc is not always consistent with
what it decides to inline between different gcc versions.
Some places should not be traced (like paravirt native_* functions)
and these are mostly marked as inline. When gcc decides not to
inline the function, and if that function should not be traced, then
the ftrace function tracer will suddenly break when it use to work
fine. This becomes even harder to debug when different versions of
gcc will not inline that function, making the same kernel and config
work for some gcc versions and not work for others.
By making all functions marked inline to not be traced will remove
the ambiguity that gcc adds when it comes to tracing functions marked
inline. All gcc versions will be consistent with what functions are
traced and having volatile working code will be removed.
Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs
to have notrace added, as the attribute __always_inline will force
the function to be inlined and then not traced.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.
When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.
When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.
The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.
To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.
Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FUNCTION_GRAPH is not set
This will force the function profiler to use the function tracer instead
of the function graph tracer.
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function > current_tracer
# cat set_ftrace_filter
schedule
# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 692/68108025 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
kworker/0:2-909 [000] .... 531.235574: schedule <-worker_thread
<idle>-0 [001] .N.. 531.235575: schedule <-cpu_idle
kworker/0:2-909 [000] .... 531.235597: schedule <-worker_thread
sshd-2563 [001] .... 531.235647: schedule <-schedule_hrtimeout_range_clock
# echo 1 > function_profile_enabled
# echo 0 > function_porfile_enabled
# cat set_ftrace_filter
schedule
# cat trace
# tracer: function
#
# entries-in-buffer/entries-written: 159701/118821262 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [002] ...1 604.870655: local_touch_nmi <-cpu_idle
<idle>-0 [002] d..1 604.870655: enter_idle <-cpu_idle
<idle>-0 [002] d..1 604.870656: atomic_notifier_call_chain <-enter_idle
<idle>-0 [002] d..1 604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain
The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.
The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.
Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's the counterpart of perf_session__parse_sample.
v2: fixed mistakes found by David Ahern.
v3: s/data/sample/
s/perf_event__change_sample/perf_event__synthesize_sample
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1323266161-394927-3-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option is documented in man perf-script but was not yet implemented:
-a
Force system-wide collection. Scripts run without a
<command> normally use -a by default, while scripts run
with a <command> normally don't - this option allows the
latter to be run in system-wide mode.
As with perf record you now can profile in system-wide mode for the
runtime of a given command, e.g.:
# perf script -a syscall-counts sleep 2
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322229925-10075-1-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix mem leaks and missing NULL pointer checks after strdup().
And get_script_path() did not free __script_root in case of continue.
Introduce a helper function get_script_root().
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322217520-3287-1-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
KVM needs to know perf capability to decide which PMU it can expose to a
guest.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1320929850-10480-8-git-send-email-gleb@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement the disabling of arch events as a quirk so that we can print
a message along with it. This creates some visibility into the problem
space and could allow us to work on adding more work-around like the
AAJ80 one.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wcja2z48wklzu1b0nkz0a5y7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Intel CPUs report non-available architectural events in cpuid leaf
0AH.EBX. Use it to disable events that are not available according
to CPU.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1320929850-10480-7-git-send-email-gleb@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide two initializers for jump_label_key that initialize it enabled
or disabled. Also modify all jump_label code to allow for jump_labels to be
initialized enabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/n/tip-p40e3yj21b68y03z1yv825e7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
WARNING: arch/x86/kernel/built-in.o(.text+0x4c71): Section mismatch in
reference from the function arch_jump_label_transform_static() to the
function .init.text:text_poke_early()
The function arch_jump_label_transform_static() references
the function __init text_poke_early().
This is often because arch_jump_label_transform_static lacks a __init
annotation or the annotation of text_poke_early is wrong.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/n/tip-9lefe89mrvurrwpqw5h8xm8z@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
jump_lable patching is very expensive operation that involves pausing all
cpus. The patching of perf_sched_events jump_label is easily controllable
from userspace by unprivileged user.
When te user runs a loop like this:
"while true; do perf stat -e cycles true; done"
... the performance of my test application that just increments a counter
for one second drops by 4%.
This is on a 16 cpu box with my test application using only one of
them. An impact on a real server doing real work will be worse.
Performance of KVM PMU drops nearly 50% due to jump_lable for "perf
record" since KVM PMU implementation creates and destroys perf event
frequently.
This patch introduces a way to rate limit jump_label patching and uses
it to fix the above problem.
I believe that as jump_label use will spread the problem will become more
common and thus solving it in a generic code is appropriate. Also fixing
it in the perf code would result in moving jump_label accounting logic to
perf code with all the ifdefs in case of JUMP_LABEL=n kernel. With this
patch all details are nicely hidden inside jump_label code.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111127155909.GO2557@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Deng-Cheng Zhu reported that sibling events that were created disabled
with enable_on_exec would never get enabled. Iterate all events
instead of the group lists.
Reported-by: Deng-Cheng Zhu <dczhu@mips.com>
Tested-by: Deng-Cheng Zhu <dczhu@mips.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322048382.14799.41.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This avoids a scheduling failure for cases like:
cycles, cycles, instructions, instructions (on Core2)
Which would end up being programmed like:
PMC0, PMC1, FP-instructions, fail
Because all events will have the same weight.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-8tnwb92asqj7xajqqoty4gel@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current x86 event scheduler fails to resolve scheduling problems
of certain combinations of events and constraints. This happens if the
counter mask of such an event is not a subset of any other counter
mask of a constraint with an equal or higher weight, e.g. constraints
of the AMD family 15h pmu:
counter mask weight
amd_f15_PMC30 0x09 2 <--- overlapping counters
amd_f15_PMC20 0x07 3
amd_f15_PMC53 0x38 3
The scheduler does not find then an existing solution. Here is an
example:
event code counter failure possible solution
0x02E PMC[3,0] 0 3
0x043 PMC[2:0] 1 0
0x045 PMC[2:0] 2 1
0x046 PMC[2:0] FAIL 2
The event scheduler may not select the correct counter in the first
cycle because it needs to know which subsequent events will be
scheduled. It may fail to schedule the events then.
To solve this, we now save the scheduler state of events with
overlapping counter counstraints. If we fail to schedule the events
we rollback to those states and try to use another free counter.
Constraints with overlapping counters are marked with a new introduced
overlap flag. We set the overlap flag for such constraints to give the
scheduler a hint which events to select for counter rescheduling. The
EVENT_CONSTRAINT_OVERLAP() macro can be used for this.
Care must be taken as the rescheduling algorithm is O(n!) which will
increase scheduling cycles for an over-commited system dramatically.
The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter
masks must be kept at a minimum. Thus, the current stack is limited to
2 states to limit the number of loops the algorithm takes in the worst
case.
On systems with no overlapping-counter constraints, this
implementation does not increase the loop count compared to the
previous algorithm.
V2:
* Renamed redo -> overlap.
* Reimplementation using perf scheduling helper functions.
V3:
* Added WARN_ON_ONCE() if out of save states.
* Changed function interface of perf_sched_restore_state() to use bool
as return value.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch introduces x86 perf scheduler code helper functions. We
need this to later add more complex functionality to support
overlapping counter constraints (next patch).
The algorithm is modified so that the range of weight values is now
generated from the constraints. There shouldn't be other functional
changes.
With the helper functions the scheduler is controlled. There are
functions to initialize, traverse the event list, find unused counters
etc. The scheduler keeps its own state.
V3:
* Added macro for_each_set_bit_cont().
* Changed functions interfaces of perf_sched_find_counter() and
perf_sched_next_event() to use bool as return value.
* Added some comments to make code better understandable.
V4:
* Fix broken event assignment if weight of the first event is not
wmin (perf_sched_init()).
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1321616122-1533-2-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Gleb writes:
> Currently pmu is disabled and re-enabled on each timer interrupt even
> when no rotation or frequency adjustment is needed. On Intel CPU this
> results in two writes into PERF_GLOBAL_CTRL MSR per tick. On bare metal
> it does not cause significant slowdown, but when running perf in a virtual
> machine it leads to 20% slowdown on my machine.
Cure this by keeping a perf_event_context::nr_freq counter that counts the
number of active events that require frequency adjustments and use this in a
similar fashion to the already existing nr_events != nr_active test in
perf_rotate_context().
By being able to exclude both rotation and frequency adjustments a-priory for
the common case we can avoid the otherwise superfluous PMU disable.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-515yhoatehd3gza7we9fapaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<ffffffff8112e49a>] fput+0xfd/0x1c2
[<ffffffff8112b54c>] filp_close+0x6d/0x78
[<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.
A simple fix is needed to have the parser be able to process ops
within the argument.
Cc: stable@vger.kernel.org
Reported-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If cpu A calls jump_label_inc() just after atomic_add_return() is
called by cpu B, atomic_inc_not_zero() will return value greater then
zero and jump_label_inc() will return to a caller before jump_label_update()
finishes its job on cpu B.
Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit 6331c28c96
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since new Intel software developers manual introduces
new format for AVX instruction set (including AVX2),
it is important to update x86-opcode-map.txt to fit
those changes.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20111205120557.15475.13236.stgit@cloud
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix instruction decoder test (insn_sanity), so that
it doesn't show both info and error messages twice on
same instruction. (In that case, show only error message)
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20111205120545.15475.7928.stgit@cloud
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For reducing memory usage of attribute table, x86 instruction
decoder puts "Group" attribute only on "no-last-prefix"
attribute table (same as vex_p == 0 case).
Thus, the decoder should look no-last-prefix table first, and
then only if it is not a group, move on to "with-last-prefix"
table (vex_p != 0).
However, current implementation, inat_get_avx_attribute()
looks with-last-prefix directly. So, when decoding
a grouped AVX instruction, the decoder fails to find correct
group because there is no "Group" attribute on the table.
This ends up with the mis-decoding of instructions, as Ingo
reported in http://thread.gmane.org/gmane.linux.kernel/1214103
This patch fixes it to check no-last-prefix table first
even if that is an AVX instruction, and get an attribute from
"with last-prefix" table only if that is not a group.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20111205120539.15475.91428.stgit@cloud
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When you do:
$ perf record -e cycles,cycles,cycles noploop 10
You expect about 10,000 samples for each event, i.e., 10s at
1000samples/sec. However, this is not what's happening. You
get much fewer samples, maybe 3700 samples/event:
$ perf report -D | tail -15
Aggregated stats:
TOTAL events: 10998
MMAP events: 66
COMM events: 2
SAMPLE events: 10930
cycles stats:
TOTAL events: 3644
SAMPLE events: 3644
cycles stats:
TOTAL events: 3642
SAMPLE events: 3642
cycles stats:
TOTAL events: 3644
SAMPLE events: 3644
On a Intel Nehalem or even AMD64, there are 4 counters capable
of measuring cycles, so there is plenty of space to measure those
events without multiplexing (even with the NMI watchdog active).
And even with multiplexing, we'd expect roughly the same number
of samples per event.
The root of the problem was that when the event that caused the buffer
to become full was not the first event passed on the cmdline, the user
notification would get lost. The notification was sent to the file
descriptor of the overflowed event but the perf tool was not polling
on it. The perf tool aggregates all samples into a single buffer,
i.e., the buffer of the first event. Consequently, it assumes
notifications for any event will come via that descriptor.
The seemingly straight forward solution of moving the waitq into the
ringbuffer object doesn't work because of life-time issues. One could
perf_event_set_output() on a fd that you're also blocking on and cause
the old rb object to be freed while its waitq would still be
referenced by the blocked thread -> FAIL.
Therefore link all events to the ringbuffer and broadcast the wakeup
from the ringbuffer object to all possible events that could be waited
upon. This is rather ugly, and we're open to better solutions but it
works for now.
Reported-by: Stephane Eranian <eranian@google.com>
Finished-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On AMD family 10h we see firmware bug messages like the following:
[Firmware Bug]: cpu 6, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[Firmware Bug]: cpu 6, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[Firmware Bug]: using offset 1 for IBS interrupts
[Firmware Bug]: workaround enabled for IBS LVT offset
perf: AMD IBS detected (0x00000007)
We always see this, since the offsets are not assigned by the BIOS for
this family. Force LVT offset assignment in this case. If the OS
assignment fails, fallback to BIOS settings and try to setup this.
The fallback to BIOS settings weakens the family check since
force_ibs_eilvt_setup() may fail e.g. in case of virtual machines.
But setup may still succeed if BIOS offsets are correct.
Other families don't have a workaround implemented that assigns LVT
offsets. It's ok, to drop calling force_ibs_eilvt_setup() for that
families.
With the patch the [Firmware Bug] messages vanish. We see now:
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111109162225.GO12451@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For errors that don't preclude checking for further errors, aka "soft"
errors, just continue testing for other errors.
Better coverage in verbose mode.
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jafcokbj26m845dsgm2hx6az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This new test will validate these new routines extracted from 'perf
record':
- perf_evlist__config_attrs
- perf_evlist__prepare_workload
- perf_evlist__start_workload
In addition to several other perf_evlist methods.
It consists of starting a simple workload, setting up just one event to
monitor ("cycles") requesting that several PERF_SAMPLE_ fields be
present in all events.
It then will check that the expected PERF_RECORD_ events are produced
and will sanity check all its fields.
Some checks performed:
. PERF_SAMPLE_TIME monotonically increases.
. PERF_SAMPLE_CPU is the one requested with sched_setaffinity
. PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked
in perf_evlist__prepare_workload and that is stored in
evlist->workload.pid
. For the events where these fields are also present in its
pre-sample_id_all fields (e.g. event->mmap.pid), that they are what
is expected too.
. That we get a bunch of mmaps:
PATH/libcSUFFIX
PATH/ldSUFFIX
[vdso]
PATH/sleep
Example:
[root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample
6: Validate PERF_RECORD_* events & perf_sample fields:
--- start ---
7159480799825 3 PERF_RECORD_SAMPLE
7159480805584 3 PERF_RECORD_SAMPLE
7159480807814 3 PERF_RECORD_SAMPLE
7159480810430 3 PERF_RECORD_SAMPLE
7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon
7159481052516 3 PERF_RECORD_COMM: sleep:8086
7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep
7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so
7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso]
7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so
7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086)
---- end ----
Validate PERF_RECORD_* events & perf_sample fields: Ok
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that tools like 'perf test' can print the events when in verbose
mode, for instance.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xnovdqfi25nc48gy6604k7yp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ftrace_event_call->filter is sched RCU protected but didn't use
rcu_assign_pointer(). Use it.
TODO: Add proper __rcu annotation to call->filter and all its users.
-v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric.
Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org # (2.6.39+)
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To obtain a list of available tests:
[root@emilia linux]# perf test list
1: vmlinux symtab matches kallsyms
2: detect open syscall event
3: detect open syscall event on all cpus
4: read samples using the mmap interface
5: parse events tests
[root@emilia linux]#
To list just a subset:
[root@emilia linux]# perf test list syscall
2: detect open syscall event
3: detect open syscall event on all cpus
[root@emilia linux]#
To run a subset:
[root@emilia linux]# perf test detect
2: detect open syscall event: Ok
3: detect open syscall event on all cpus: Ok
[root@emilia linux]#
Specific tests can be chosen by number:
[root@emilia linux]# perf test 1 3 parse
1: vmlinux symtab matches kallsyms: Ok
3: detect open syscall event on all cpus: Ok
5: parse events tests: Ok
[root@emilia linux]#
Now to write more tests!
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nqec2145qfxdgimux28aw7v8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At first tools were required to do that, but while writing the python
bindings to simplify the API I made them auto-allocate when needed.
This just makes record, stat and top use that auto allocation,
simplifying them a bit.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iokhcvkzzijr3keioubx8hlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows collecting events system wide and then pulling out events for a
specific task name(s). e.g,
perf script -c gnome-shell,gnome-terminal
Applies on top of:
https://lkml.org/lkml/2011/11/13/74
v2->v3
- update Documentation
v1->v2
- use comm_list from symbol_conf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321894972-24246-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.
Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.
v1 -> v2
- update perf-script.txt too
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
