A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Loop over all features to enable it instead of explicitly enabling every
single feature. Reducing duplicate code and making it more robust to
later changes e.g. when adding more features.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1323966762-8574-3-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new --uid command line option will show only the tasks for a given
user, using the proc interface to figure out the existing tasks.
Kernel work is needed to close races at startup, but this should already
be useful in many use cases.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bdnspm000gw2l984a2t53o8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The features HEADER_TRACE_INFO and HEADER_BUILD_ID are handled
different when writing the feature section. All other features are
simply disabled on failure and writing the section goes on without
returning an error. There is no reason for these special cases. This
patch unifies handling of the features.
This should be ok since all features can be parsed independently.
Offset and size of a feature's block is stored in struct perf_file_
section right after the data block of perf.data (see perf_session__
write_header()). Thus, if a feature does not exist then other features
can be processed anyway.
Also moving special code for HEADER_BUILD_ID out to write_build_id().
v2:
* perf record throws an error now if buildids may not be generated,
which can be disabled with the --no-buildid option.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-6-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we automatically point users at it, let's provide them some
guidance so that they hopefully don't just get mysterious EINVAL's
from the kernel.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-4-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
[ committer note: Made it work after 50a682c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This failure is most likely due to running up against the
kernel.perf_event_mlock_kb sysctl, so we can tell the user what to do to
fix the issue.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-3-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The problem is that when SAMPLE_PERIOD is not set, the kernel generates
a number of samples in proportion to an event's period. Number of these
samples may be too big and the kernel throttles all samples above a
defined limit.
E.g.: I want to trace when a process sleeps. I created a process which
sleeps for 1ms and for 4ms. perf got 100 events in both cases.
swapper 0 [000] 1141.371830: sched_stat_sleep: comm=foo pid=1801 delay=1386750 [ns]
swapper 0 [000] 1141.369444: sched_stat_sleep: comm=foo pid=1801 delay=4499585 [ns]
In the first case a kernel want to send 4499585 events and in the second
case it wants to send 1386750 events. perf-reports shows that process
sleeps in both places equal time.
Instead of this we can get only one sample with an attribute period. As
result we have less data transferring between kernel and user-space and
we avoid throttling of samples.
The patch "events: Don't divide events if it has field period" added a
kernel part of this functionality.
Acked-by: Arun Sharma <asharma@fb.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1324391565-1369947-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At first tools were required to do that, but while writing the python
bindings to simplify the API I made them auto-allocate when needed.
This just makes record, stat and top use that auto allocation,
simplifying them a bit.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iokhcvkzzijr3keioubx8hlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better reflect that it became the base class for all tools, that must
be in each tool struct and where common stuff will be put.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing the exposure of perf_session further, so that we can use the
classes in cases where no perf.data file is created.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't need to have that many globals.
Next steps will remove the 'session' pointer, that in most cases is
not needed.
Then we can rename perf_event_ops to 'perf_tool' that better describes
this class hierarchy.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used in other tools to share the command line parsing code.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8x0yr77r6lrd2t699s499m8n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tools being developed will need this to allow the user to override this
value.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zydc1yhxfm0z35fuy95bsn1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Every tool that calls this and allows the user to override the value
needs this logic.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lwscxpg57xfzahz5dmdfp9uz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can easily start a workload in other tools.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zdsksd4aphu0nltg2lpwsw3x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf record', so that we can share option parsing,
etc. Eventually will be used by 'perf top', but first 'trace' will use
it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hzjqsgnte1esk90ytq0ap98v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it will exit the tool after the user is notified.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vy06m8xzlvkhr8tk7nylhbng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __perf_evsel__open routing was grouping just the threads for that
specific events per cpu when we want to group all threads in all events
to the first fd opened on that cpu.
So pass the xyarray with the first event, where the other events will be
able to get that first per cpu fd.
At some point top and record will switch to using perf_evlist__open that
takes care of this detail and probably will also handle the fallback
from hw to soft counters, etc.
Reported-by: Deng-Cheng Zhu <dczhu@mips.com>
Tested-by: Deng-Cheng Zhu <dczhu@mips.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ebm34rh098i9y9v4cytfdp0x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a program crashes under perf there is no message about it, unlike
when running it from bash. This can be confusing and lead to wrong
actions during debugging.
Print fatal signals in perf stat/record.
Thanks to Furat Afram for finding the problem originally
Link: http://lkml.kernel.org/r/1316122302-24306-1-git-send-email-andi@firstfloor.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-record currently creates events enabled. When doing a system wide
collection (-a arg) this causes data collection for perf's
initialization activities -- eg., perf_event__synthesize_threads().
For some events (e.g., context switch S/W event or tracepoints like
syscalls) perf's initialization causes a lot of events to be captured
frequently generating "Check IO/CPU overload!" warnings on larger
systems (e.g., 2 socket, quad core, hyperthreading).
perf's initialization phase can be skipped by creating events
disabled and then enabling them once the initialization is done.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1314289075-14706-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Group event scheduling command line option is missing in perf
record/stat.
Add it to perf record/stat, which is same as in perf top.
Reported-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1313577727.2754.5.camel@hp6530s
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove the last case of access to the FD() macro outside the library.
Inspired by a patch by Borislav that moved the FD() macro to util.h, for
namespace concerns I rather preferred to constrain it to ev{sel,list}.c.
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qn893qsstcg366tkucu649qj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving out the option parameter from parse_events function,
and adding new parse_events_option function instead.
The option parameter is used only to carry "struct perf_evlist"
pointer for chaining new events. Putting it away, enable us
to call parse_events from other places without using the
option parameter.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat doesn't mmap and its perfectly fine for it to use task-bound
counters with inheritance.
So set the attr.inherit on the caller and leave the syscall itself to
validate it.
When the mmap fails perf_evlist__mmap will just emit a warning if this
is the failure reason.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110414170121.GC3229@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default setting of perf record is to mmap 128 pages if the user
did not override with -m.
However the page size may vary accross different architecture
settings, giving different default size between each.
Moreover the kernel side still has a default max number of mlocked
pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages
with page size > 4096 overlaps this threshold.
Thus, better adapt to this limitation and set the default number of
pages to fit those 512 kiB + 1 page.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Resend of patch sent back in January 2011 in light of recent confusion around
unsupported events for a given platform.
Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446b does for stat.
Retry of Arnaldo's patch using ui_warning instead of die which allows the
fallback from hardware cycles to software clock.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
[ committer note: Some adjustments to make it apply to newer codebase ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.
Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently set the filters after we mmap the events, this is a
race that let undesired events record themselves in the buffer before
we had the time to set the filters.
So set the filters before they can be recorded. That also librarizes
the filters setting so that filtering can be done more easily
from other tools than perf record later.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
While testing the --filter option I noticed that we were writing lots of
unneeded stuff to the perf.data header when the filter ioctl fails, so
move the atexit(atexit_header) call to after we create the counters
successfully.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixups due to rename of event_t routines from event__ to perf_event__
done in perf/core.
Conflicts:
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/util/event.c
tools/perf/util/event.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jeff Moyer reported these messages:
Warning: ... trying to fall back to cpu-clock-ticks
couldn't open /proc/-1/status
couldn't open /proc/-1/maps
[ls output]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (~363 samples) ]
That lead me and David Ahern to see that something was fishy on the thread
synthesizing routines, at least for the case where the workload is started
from 'perf record', as -1 is the default for target_tid in 'perf record --tid'
parameter, so somehow we were trying to synthesize the PERF_RECORD_MMAP and
PERF_RECORD_COMM events for the thread -1, a bug.
So I investigated this and noticed that when we introduced support for
recording a process and its threads using --pid some bugs were introduced and
that the way to fix it was to instead of passing the target_tid to the event
synthesizing routines we should better pass the thread_map that has the list of
threads for a --pid or just the single thread for a --tid.
Checked in the following ways:
On a 8-way machine run cyclictest:
[root@emilia ~]# perf record cyclictest -a -t -n -p99 -i100 -d50
policy: fifo: loadavg: 0.00 0.13 0.31 2/139 28798
T: 0 (28791) P:99 I:100 C: 25072 Min: 4 Act: 5 Avg: 6 Max: 122
T: 1 (28792) P:98 I:150 C: 16715 Min: 4 Act: 6 Avg: 5 Max: 27
T: 2 (28793) P:97 I:200 C: 12534 Min: 4 Act: 5 Avg: 4 Max: 8
T: 3 (28794) P:96 I:250 C: 10028 Min: 4 Act: 5 Avg: 5 Max: 96
T: 4 (28795) P:95 I:300 C: 8357 Min: 5 Act: 6 Avg: 5 Max: 12
T: 5 (28796) P:94 I:350 C: 7163 Min: 5 Act: 6 Avg: 5 Max: 12
T: 6 (28797) P:93 I:400 C: 6267 Min: 4 Act: 5 Avg: 5 Max: 9
T: 7 (28798) P:92 I:450 C: 5571 Min: 4 Act: 5 Avg: 5 Max: 9
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (~4719 samples) ]
[root@emilia ~]#
This will create one extra thread per CPU:
[root@emilia ~]# tuna -t cyclictest -CP
thread ctxt_switches
pid SCHED_ rtpri affinity voluntary nonvoluntary cmd
28825 OTHER 0 0xff 2169 671 cyclictest
28832 FIFO 93 6 52338 1 cyclictest
28833 FIFO 92 7 46524 1 cyclictest
28826 FIFO 99 0 209360 1 cyclictest
28827 FIFO 98 1 139577 1 cyclictest
28828 FIFO 97 2 104686 0 cyclictest
28829 FIFO 96 3 83751 1 cyclictest
28830 FIFO 95 4 69794 1 cyclictest
28831 FIFO 94 5 59825 1 cyclictest
[root@emilia ~]#
So we should expect only samples for the above 9 threads when using the
--dump-raw-trace|-D perf report switch to look at the column with the tid:
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
629 28825
110 28826
491 28827
308 28828
198 28829
621 28830
225 28831
203 28832
89 28833
[root@emilia ~]#
So for workloads started by 'perf record' seems to work, now for existing workloads,
just run cyclictest first, without 'perf record':
[root@emilia ~]# tuna -t cyclictest -CP
thread ctxt_switches
pid SCHED_ rtpri affinity voluntary nonvoluntary cmd
28859 OTHER 0 0xff 594 200 cyclictest
28864 FIFO 95 4 16587 1 cyclictest
28865 FIFO 94 5 14219 1 cyclictest
28866 FIFO 93 6 12443 0 cyclictest
28867 FIFO 92 7 11062 1 cyclictest
28860 FIFO 99 0 49779 1 cyclictest
28861 FIFO 98 1 33190 1 cyclictest
28862 FIFO 97 2 24895 1 cyclictest
28863 FIFO 96 3 19918 1 cyclictest
[root@emilia ~]#
and then later did:
[root@emilia ~]# perf record --pid 28859 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (~1195 samples) ]
[root@emilia ~]#
To collect 3 seconds worth of samples for pid 28859 and its children:
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
15 28859
33 28860
19 28861
13 28862
13 28863
10 28864
11 28865
9 28866
255 28867
[root@emilia ~]#
Works, last thing is to check if looking at just one of those threads also works:
[root@emilia ~]# perf record --tid 28866 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.006 MB perf.data (~242 samples) ]
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
3 28866
[root@emilia ~]#
Works too.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't have to pass it around to the several methods that
needs it, simplifying usage.
There is one case where we don't have the thread/cpu map in advance,
which is in the parsing routines used by top, stat, record, that we have
to wait till all options are parsed to know if a cpu or thread list was
passed to then create those maps.
For that case consolidate the cpu and thread map creation via
perf_evlist__create_maps() out of the code in top and record, while also
providing a perf_evlist__set_maps() for cases where multiple evlists
share maps or for when maps that represent CPU sockets, for instance,
get crafted out of topology information or subsets of threads in a
particular application are to be monitored, providing more granularity
in specifying which cpus and threads to monitor.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we open the mmap with (PROT_READ | PROT_WRITE), signalling the kernel
with perf_mmap__write_tail() when consuming data, so the kernel will not
overwrite.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To untangle it from struct thread handling, that is tied to symbols, etc.
Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch gives the ability to 'perf record' to detect when its stdout
has been redirected to a pipe. There's now no more need to add '-o -'
switch in this case.
However '-o <path>' option has always precedence, that is if specified
and stdout has been connected via a pipe then the output will go into
the specified output.
LKML-Reference: <m3ipxo966i.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is more stuff that can go to the perf_ev{sel,list} layer, like
detecting if sample_id_all is available, etc, but lets try using this in
'perf test' first.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Close to perf_mmap__read_head() and the perf_mmap struct definition.
This is useful for any recorder, and we will need it in 'perf test'.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paving the way to using perf_evsel->mmap, do this to reduce the patch
noise in the next ones.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now its time to factor out the mmap handling bits into the perf_evsel
class.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allocating just the space needed for nr_cpus * nr_threads * nr_evsels,
not the MAX_NR_CPUS and counters.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.
There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.
Use option->value to pass the evsel_list to parse_{events,filters}.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
