Commit Graph

449501 Commits

Author SHA1 Message Date
Paul McQuade
7153e40273 ipc, kernel: use Linux headers
Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Use #include <linux/types.h> instead of <asm/types.h>

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Mathias Krause
eb66ec44f8 ipc: constify ipc_ops
There is no need to recreate the very same ipc_ops structure on every
kernel entry for msgget/semget/shmget.  Just declare it static and be
done with it.  While at it, constify it as we don't modify the structure
at runtime.

Found in the PaX patch, written by the PaX Team.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Paul Bolle
3e4e0f0a87 initramfs: remove "compression mode" choice
Commit 9ba4bcb645 ("initramfs: read CONFIG_RD_ variables for initramfs
compression") removed the users of the various INITRAMFS_COMPRESSION_*
Kconfig symbols.  So since v3.13 the entire "Built-in initramfs
compression mode" choice is a set of knobs connected to nothing.  The
entire choice can safely be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Fabian Frederick
04541a2f31 fs/devpts/inode.c: convert printk to pr_foo()
Also convert spaces to tabs (checkpatch warnings) if (!dentry) KERN_NOTICE
converted to pr_err (like if (!inode) error process)

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Fabian Frederick
0227d6abb3 fs/cachefiles: replace kerror by pr_err
Also add pr_fmt in internal.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Fabian Frederick
4e1eb88305 FS/CACHEFILES: convert printk to pr_foo()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Fabian Frederick
ef74885353 fs/pstore: logging clean-up
- Define pr_fmt in plateform.c and ram_core.c for global prefix.

- Coalesce format fragments.

- Separate format/arguments on lines > 80 characters.

Note: Some pr_foo() were initially declared without prefix and therefore
this could break existing log analyzer.

[akpm@linux-foundation.org: missed a couple of prefix removals]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
f3da64d1ea kernel/profile.c: use static const char instead of static char
schedstr, sleepstr and kvmstr are only used in strcmp & strlen

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
aba871f1e9 kernel/profile.c: convert printk to pr_foo()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
9606d9aa85 fs/affs: pr_debug cleanup
- Remove AFFS: prefix (defined in pr_fmt)

- Use __func__

- Separate format/arguments on lines > 80 characters.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
0158de12b0 fs/affs: convert printk to pr_foo()
-All printk(KERN_foo converted to pr_foo()

-Default printk converted to pr_warn()

-Add pr_fmt to affs.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
0c89d67016 fs/affs/file.c: remove unnecessary function parameters
- affs_do_readpage_ofs is always called with from = 0 ie reading from
  page->index

- File parameter is never used

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Hans Verkuil
d55875f5d5 include/asm-generic/ioctl.h: fix _IOC_TYPECHECK sparse error
When running sparse over drivers/media/v4l2-core/v4l2-ioctl.c I get these
errors:

  drivers/media/v4l2-core/v4l2-ioctl.c:2043:9: error: bad integer constant expression
  drivers/media/v4l2-core/v4l2-ioctl.c:2044:9: error: bad integer constant expression
  drivers/media/v4l2-core/v4l2-ioctl.c:2045:9: error: bad integer constant expression
  drivers/media/v4l2-core/v4l2-ioctl.c:2046:9: error: bad integer constant expression

etc.

The root cause of that turns out to be in include/asm-generic/ioctl.h:

#include <uapi/asm-generic/ioctl.h>

/* provoke compile error for invalid uses of size argument */
extern unsigned int __invalid_size_argument_for_IOC;
#define _IOC_TYPECHECK(t) \
        ((sizeof(t) == sizeof(t[1]) && \
          sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
          sizeof(t) : __invalid_size_argument_for_IOC)

If it is defined as this (as is already done if __KERNEL__ is not defined):

  #define _IOC_TYPECHECK(t) (sizeof(t))

then all is well with the world.

This patch allows sparse to work correctly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Fabian Frederick
68a9a435e4 kernel/user_namespace.c: kernel-doc/checkpatch fixes
-uid->gid
-split some function declarations
-if/then/else warning

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Kees Cook
24fe831c17 tools/testing/selftests/sysctl: validate sysctl_writes_strict
This adds several behavioral tests to sysctl string and number writing
to detect unexpected cases that behaved differently when the sysctl
kernel.sysctl_writes_strict != 1.

[ original ]
    root@localhost:~# make test_num
    == Testing sysctl behavior against /proc/sys/kernel/domainname ==
    Writing test file ... ok
    Checking sysctl is not set to test value ... ok
    Writing sysctl from shell ... ok
    Resetting sysctl to original value ... ok
    Writing entire sysctl in single write ... ok
    Writing middle of sysctl after synchronized seek ... FAIL
    Writing beyond end of sysctl ... FAIL
    Writing sysctl with multiple long writes ... FAIL
    Writing entire sysctl in short writes ... FAIL
    Writing middle of sysctl after unsynchronized seek ... ok
    Checking sysctl maxlen is at least 65 ... ok
    Checking sysctl keeps original string on overflow append ... FAIL
    Checking sysctl stays NULL terminated on write ... ok
    Checking sysctl stays NULL terminated on overwrite ... ok
    make: *** [test_num] Error 1
    root@localhost:~# make test_string
    == Testing sysctl behavior against /proc/sys/vm/swappiness ==
    Writing test file ... ok
    Checking sysctl is not set to test value ... ok
    Writing sysctl from shell ... ok
    Resetting sysctl to original value ... ok
    Writing entire sysctl in single write ... ok
    Writing middle of sysctl after synchronized seek ... FAIL
    Writing beyond end of sysctl ... FAIL
    Writing sysctl with multiple long writes ... ok
    make: *** [test_string] Error 1

[ with CONFIG_PROC_SYSCTL_STRICT_WRITES ]
    root@localhost:~# make run_tests
    == Testing sysctl behavior against /proc/sys/kernel/domainname ==
    Writing test file ... ok
    Checking sysctl is not set to test value ... ok
    Writing sysctl from shell ... ok
    Resetting sysctl to original value ... ok
    Writing entire sysctl in single write ... ok
    Writing middle of sysctl after synchronized seek ... ok
    Writing beyond end of sysctl ... ok
    Writing sysctl with multiple long writes ... ok
    Writing entire sysctl in short writes ... ok
    Writing middle of sysctl after unsynchronized seek ... ok
    Checking sysctl maxlen is at least 65 ... ok
    Checking sysctl keeps original string on overflow append ... ok
    Checking sysctl stays NULL terminated on write ... ok
    Checking sysctl stays NULL terminated on overwrite ... ok
    == Testing sysctl behavior against /proc/sys/vm/swappiness ==
    Writing test file ... ok
    Checking sysctl is not set to test value ... ok
    Writing sysctl from shell ... ok
    Resetting sysctl to original value ... ok
    Writing entire sysctl in single write ... ok
    Writing middle of sysctl after synchronized seek ... ok
    Writing beyond end of sysctl ... ok
    Writing sysctl with multiple long writes ... ok

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Kees Cook
f4aacea2f5 sysctl: allow for strict write position handling
When writing to a sysctl string, each write, regardless of VFS position,
begins writing the string from the start.  This means the contents of
the last write to the sysctl controls the string contents instead of the
first:

  open("/proc/sys/kernel/modprobe", O_WRONLY)   = 1
  write(1, "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"..., 4096) = 4096
  write(1, "/bin/true", 9)                = 9
  close(1)                                = 0

  $ cat /proc/sys/kernel/modprobe
  /bin/true

Expected behaviour would be to have the sysctl be "AAAA..." capped at
maxlen (in this case KMOD_PATH_LEN: 256), instead of truncating to the
contents of the second write.  Similarly, multiple short writes would
not append to the sysctl.

The old behavior is unlike regular POSIX files enough that doing audits
of software that interact with sysctls can end up in unexpected or
dangerous situations.  For example, "as long as the input starts with a
trusted path" turns out to be an insufficient filter, as what must also
happen is for the input to be entirely contained in a single write
syscall -- not a common consideration, especially for high level tools.

This provides kernel.sysctl_writes_strict as a way to make this behavior
act in a less surprising manner for strings, and disallows non-zero file
position when writing numeric sysctls (similar to what is already done
when reading from non-zero file positions).  For now, the default (0) is
to warn about non-zero file position use, but retain the legacy
behavior.  Setting this to -1 disables the warning, and setting this to
1 enables the file position respecting behavior.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: move misplaced hunk, per Randy]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Kees Cook
2ca9bb456a sysctl: refactor sysctl string writing logic
Consolidate buffer length checking with new-line/end-of-line checking.
Additionally, instead of reading user memory twice, just do the
assignment during the loop.

This change doesn't affect the potential races here.  It was already
possible to read a sysctl that was in the middle of a write.  In both
cases, the string will always be NULL terminated.  The pre-existing race
remains a problem to be solved.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Kees Cook
f88083005a sysctl: clean up char buffer arguments
When writing to a sysctl string, each write, regardless of VFS position,
began writing the string from the start.  This meant the contents of the
last write to the sysctl controlled the string contents instead of the
first.

This misbehavior was featured in an exploit against Chrome OS.  While
it's not in itself a vulnerability, it's a weirdness that isn't on the
mind of most auditors: "This filter looks correct, the first line
written would not be meaningful to sysctl" doesn't apply here, since the
size of the write and the contents of the final write are what matter
when writing to sysctls.

This adds the sysctl kernel.sysctl_writes_strict to control the write
behavior.  The default (0) reports when VFS position is non-0 on a
write, but retains legacy behavior, -1 disables the warning, and 1
enables the position-respecting behavior.

The long-term plan here is to wait for userspace to be fixed in response
to the new warning and to then switch the default kernel behavior to the
new position-respecting behavior.

This patch (of 4):

The char buffer arguments are needlessly cast in weird places.  Clean it
up so things are easier to read.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Alexander Gordeev
1c92ab1e74 rapidio/tsi721: use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers using these two
interfaces need to be updated to use the new pci_enable_msi_range() or
pci_enable_msi_exact() and pci_enable_msix_range() or
pci_enable_msix_exact() interfaces.

The patch has no runtime effect.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Lai Jiangshan
dcbff5d1ef idr: reorder the fields
idr_layer->layer is always accessed in read path, move it in the front.

idr_layer->bitmap is moved on the bottom.  And rcu_head shares with
bitmap due to they do not be accessed at the same time.

idr->id_free/id_free_cnt/lock are free list fields, and moved to the
bottom.  They will be removed in near future.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:13 -07:00
Lai Jiangshan
15f3ec3f23 idr: reduce the unneeded check in free_layer()
If "idr->hint == p" is true, it also implies "idr->hint" is true(not NULL).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Lai Jiangshan
aefb768297 idr: don't need to shink the free list when idr_remove()
After idr subsystem is changed to RCU-awared, the free layer will not go
to the free list.  The free list will not be filled up when
idr_remove().  So we don't need to shink it too.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Lai Jiangshan
b93804b2fc idr: fix idr_replace()'s returned error code
When the smaller id is not found, idr_replace() returns -ENOENT.  But
when the id is bigger enough, idr_replace() returns -EINVAL, actually
there is no difference between these two kinds of ids.

These are all unallocated id, the return values of the idr_replace() for
these ids should be the same: -ENOENT.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Lai Jiangshan
aef0f62e87 idr: fix NULL pointer dereference when ida_remove(unallocated_id)
If the ida has at least one existing id, and when an unallocated ID
which meets a certain condition is passed to the ida_remove(), the
system will crash because it hits NULL pointer dereference.

The condition is that the unallocated ID shares the same lowest idr
layer with the existing ID, but the idr slot would be different if the
unallocated ID were to be allocated.

In this case the matching idr slot for the unallocated_id is NULL,
causing @bitmap to be NULL which the function dereferences without
checking crashing the kernel.

See the test code:

  static void test3(void)
  {
        int id;
        DEFINE_IDA(test_ida);

        printk(KERN_INFO "Start test3\n");
        if (ida_pre_get(&test_ida, GFP_KERNEL) < 0) return;
        if (ida_get_new(&test_ida,  &id) < 0) return;
        ida_remove(&test_ida, 4000); /* bug: null deference here */
        printk(KERN_INFO "End of test3\n");
  }

It happens only when the caller tries to free an unallocated ID which is
the caller's fault.  It is not a bug.  But it is better to add the
proper check and complain rather than crashing the kernel.

[tj@kernel.org: updated patch description]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Lai Jiangshan
8f9f665a70 idr: fix unexpected ID-removal when idr_remove(unallocated_id)
If unallocated_id = (ANY * idr_max(idp->layers) + existing_id) is passed
to idr_remove().  The existing_id will be removed unexpectedly.

The following test shows this unexpected id-removal:

  static void test4(void)
  {
        int id;
        DEFINE_IDR(test_idr);

        printk(KERN_INFO "Start test4\n");
        id = idr_alloc(&test_idr, (void *)1, 42, 43, GFP_KERNEL);
        BUG_ON(id != 42);
        idr_remove(&test_idr, 42 + IDR_SIZE);
        TEST_BUG_ON(idr_find(&test_idr, 42) != (void *)1);
        idr_destroy(&test_idr);
        printk(KERN_INFO "End of test4\n");
  }

ida_remove() shares the similar problem.

It happens only when the caller tries to free an unallocated ID which is
the caller's fault.  It is not a bug.  But it is better to add the
proper check and complain rather than removing an existing_id silently.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Lai Jiangshan
3afb69cb55 idr: fix overflow bug during maximum ID calculation at maximum height
idr_replace() open-codes the logic to calculate the maximum valid ID
given the height of the idr tree; unfortunately, the open-coded logic
doesn't account for the fact that the top layer may have unused slots
and over-shifts the limit to zero when the tree is at its maximum
height.

The following test code shows it fails to replace the value for
id=((1<<27)+42):

  static void test5(void)
  {
        int id;
        DEFINE_IDR(test_idr);
  #define TEST5_START ((1<<27)+42) /* use the highest layer */

        printk(KERN_INFO "Start test5\n");
        id = idr_alloc(&test_idr, (void *)1, TEST5_START, 0, GFP_KERNEL);
        BUG_ON(id != TEST5_START);
        TEST_BUG_ON(idr_replace(&test_idr, (void *)2, TEST5_START) != (void *)1);
        idr_destroy(&test_idr);
        printk(KERN_INFO "End of test5\n");
  }

Fix the bug by using idr_max() which correctly takes into account the
maximum allowed shift.

sub_alloc() shares the same problem and may incorrectly fail with
-EAGAIN; however, this bug doesn't affect correct operation because
idr_get_empty_slot(), which already uses idr_max(), retries with the
increased @id in such cases.

[tj@kernel.org: Updated patch description.]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Fabian Frederick
e1bebcf41e kernel/kexec.c: convert printk to pr_foo()
+ some pr_warning -> pr_warn and checkpatch warning fixes

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Masami Hiramatsu
f06e5153f4 kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers
Add a "crash_kexec_post_notifiers" boot option to run kdump after
running panic_notifiers and dump kmsg.  This can help rare situations
where kdump fails because of unstable crashed kernel or hardware failure
(memory corruption on critical data/code), or the 2nd kernel is already
broken by the 1st kernel (it's a broken behavior, but who can guarantee
that the "crashed" kernel works correctly?).

Usage: add "crash_kexec_post_notifiers" to kernel boot option.

Note that this actually increases risks of the failure of kdump.  This
option should be set only if you worry about the rare case of kdump
failure rather than increasing the chance of success.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Motohiro Kosaki <Motohiro.Kosaki@us.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Satoru MORIYA <satoru.moriya.br@hitachi.com>
Cc: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Srivatsa S. Bhat
a219ccf463 smp: print more useful debug info upon receiving IPI on an offline CPU
There is a longstanding problem related to CPU hotplug which causes IPIs
to be delivered to offline CPUs, and the smp-call-function IPI handler
code prints out a warning whenever this is detected.  Every once in a
while this (usually harmless) warning gets reported on LKML, but so far
it has not been completely fixed.  Usually the solution involves finding
out the IPI sender and fixing it by adding appropriate synchronization
with CPU hotplug.

However, while going through one such internal bug reports, I found that
there is a significant bug in the receiver side itself (more
specifically, in stop-machine) that can lead to this problem even when
the sender code is perfectly fine.  This patchset fixes that
synchronization problem in the CPU hotplug stop-machine code.

Patch 1 adds some additional debug code to the smp-call-function
framework, to help debug such issues easily.

Patch 2 modifies the stop-machine code to ensure that any IPIs that were
sent while the target CPU was online, would be noticed and handled by
that CPU without fail before it goes offline.  Thus, this avoids
scenarios where IPIs are received on offline CPUs (as long as the sender
uses proper hotplug synchronization).

In fact, I debugged the problem by using Patch 1, and found that the
payload of the IPI was always the block layer's trigger_softirq()
function.  But I was not able to find anything wrong with the block
layer code.  That's when I started looking at the stop-machine code and
realized that there is a race-window which makes the IPI _receiver_ the
culprit, not the sender.  Patch 2 fixes that race and hence this should
put an end to most of the hard-to-debug IPI-to-offline-CPU issues.

This patch (of 2):

Today the smp-call-function code just prints a warning if we get an IPI
on an offline CPU.  This info is sufficient to let us know that
something went wrong, but often it is very hard to debug exactly who
sent the IPI and why, from this info alone.

In most cases, we get the warning about the IPI to an offline CPU,
immediately after the CPU going offline comes out of the stop-machine
phase and reenables interrupts.  Since all online CPUs participate in
stop-machine, the information regarding the sender of the IPI is already
lost by the time we exit the stop-machine loop.  So even if we dump the
stack on each CPU at this point, we won't find anything useful since all
of them will show the stack-trace of the stopper thread.  So we need a
better way to figure out who sent the IPI and why.

To achieve this, when we detect an IPI targeted to an offline CPU, loop
through the call-single-data linked list and print out the payload
(i.e., the name of the function which was supposed to be executed by the
target CPU).  This would give us an insight as to who might have sent
the IPI and help us debug this further.

[akpm@linux-foundation.org: correctly suppress warning output on second and later occurrences]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <mgalbraith@suse.de>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Fabian Frederick
a05e16ada4 fs/proc/vmcore.c: remove NULL assignment to static
Static values are automatically initialized to NULL.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Fabian Frederick
17c2b4ee40 fs/proc/task_mmu.c: replace seq_printf by seq_puts
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Oleg Nesterov
76e0a6f40b signals: change wait_for_helper() to use kernel_sigaction()
Now that we have kernel_sigaction() we can change wait_for_helper() to
use it and cleans up the code a bit.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Oleg Nesterov
b4e74264eb signals: introduce kernel_sigaction()
Now that allow_signal() is really trivial we can unify it with
disallow_signal().  Add the new helper, kernel_sigaction(), and
reimplement allow_signal/disallow_signal as a trivial wrappers.

This saves one EXPORT_SYMBOL() and the new helper can have more users.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Oleg Nesterov
580d34e42a signals: disallow_signal() should flush the potentially pending signal
disallow_signal() simply sets SIG_IGN, this is not enough and
recalc_sigpending() is simply pointless because in can never change the
state of TIF_SIGPENDING.

If we ignore a signal, we also need to do flush_sigqueue_mask() for the
case when this signal is pending, this way recalc_sigpending() can
actually clear TIF_SIGPENDING and we do not "leak" the allocated
siginfo's.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Oleg Nesterov
ec5955b8fd signals: kill the obsolete sigdelset() and recalc_sigpending() in allow_signal()
allow_signal() does sigdelset(current->blocked) due to historic reason,
previously it could be called by a daemonize()'ed kthread, and
daemonize() played with current->blocked.

Now that daemonize() has gone away we can remove sigdelset() and
recalc_sigpending().  If a user really wants to unblock a signal, it
must use sigprocmask() or set_current_block() explicitely.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
c240837fa7 signals: jffs2: fix the wrong usage of disallow_signal()
jffs2_garbage_collect_thread() does disallow_signal(SIGHUP) around
jffs2_garbage_collect_pass() and the comment says "We don't want SIGHUP
to interrupt us".

But disallow_signal() can't ensure that jffs2_garbage_collect_pass()
won't be interrupted by SIGHUP, the problem is that SIGHUP can be
already pending when disallow_signal() is called, and in this case any
interruptible sleep won't block.

Note: this is in fact because disallow_signal() is buggy and should be
fixed, see the next changes.

But there is another reason why disallow_signal() is wrong: SIG_IGN set
by disallow_signal() silently discards any SIGHUP which can be sent
before the next allow_signal(SIGHUP).

Change this code to use sigprocmask(SIG_UNBLOCK/SIG_BLOCK, SIGHUP).
This even matches the old (and wrong) semantics allow/disallow had when
this logic was written.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
0341729b4b signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch]
Move the declaration/definition of allow_signal/disallow_signal to
signal.h/signal.c.  The new place is more logical and allows to use the
static helpers in signal.c (see the next changes).

While at it, make them return void and remove the valid_signal() check.
Nobody checks the returned value, and in-kernel users must not pass the
wrong signal number.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
afe2b0386a signals: cleanup the usage of t/current in do_sigaction()
The usage of "task_struct *t" and "current" in do_sigaction() looks really
annoying and chaotic.  Initially "t" is used as a cached value of current
but not consistently, then it is reused as a loop variable and we have to
use "current" again.

Clean up this mess and also convert the code to use for_each_thread().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
c09c144139 signals: rename rm_from_queue_full() to flush_sigqueue_mask()
"rm_from_queue_full" looks ugly and misleading, especially now that
rm_from_queue() has gone away.  Rename it to flush_sigqueue_mask(), this
matches flush_sigqueue() we already have.

Also remove the obsolete comment which explains the difference with
rm_from_queue() we already killed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
9490592f27 signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread()
rm_from_queue() doesn't make sense.  The only caller, prepare_signal(),
can use rm_from_queue_full() with the same effect.

While at it, change prepare_signal() to use for_each_thread() instead of
do/while_each_thread.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
6114041aa7 signals: s/siginitset/sigemptyset/ in do_sigtimedwait()
Cosmetic, but siginitset(0) looks a bit strange, sigemptyset() is what
do_sigtimedwait() needs.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
36fac0a214 signals: kill sigfindinword()
It has no users and it doesn't look useful.  I do not know why/when it was
introduced, I can't even find any user in the git history.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov
650226bd95 ptrace: task_clear_jobctl_trapping()->wake_up_bit() needs mb()
__wake_up_bit() checks waitqueue_active() and thus the caller needs mb()
as wake_up_bit() documents, fix task_clear_jobctl_trapping().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Matthew Dempsky
4e52365f27 ptrace: fix fork event messages across pid namespaces
When tracing a process in another pid namespace, it's important for fork
event messages to contain the child's pid as seen from the tracer's pid
namespace, not the parent's.  Otherwise, the tracer won't be able to
correlate the fork event with later SIGTRAP signals it receives from the
child.

We still risk a race condition if a ptracer from a different pid
namespace attaches after we compute the pid_t value.  However, sending a
bogus fork event message in this unlikely scenario is still a vast
improvement over the status quo where we always send bogus fork event
messages to debuggers in a different pid namespace than the forking
process.

Signed-off-by: Matthew Dempsky <mdempsky@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Julien Tinnes <jln@chromium.org>
Cc: Roland McGrath <mcgrathr@chromium.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Alexey Dobriyan
615cc2c9cf Documentation/memory-barriers.txt: fix important typo re memory barriers
Examples introducing neccesity of RMB+WMP pair reads as

        A=3	READ B
        www	rrrrrr
        B=4	READ A

Note the opposite order of reads vs writes.

But the first example without barriers reads as

        A=3	READ A
        B=4	READ B

There are 4 outcomes in the first example.

But if someone new to the concept tries to insert barriers like this:

        A=3	READ A
        www	rrrrrr
        B=4	READ B

he will still get all 4 possible outcomes, because "READ A" is first.

All this can be utterly confusing because barrier pair seems to be
superfluous.  In short, fixup first example to match latter examples
with barriers.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Fabian Frederick
0b07cb8271 Documentation/filesystems/seq_file.txt: create_proc_entry deprecated
Linked article in seq_file.txt still uses create_proc_entry which was
removed in commit 80e928f7eb ("proc: Kill create_proc_entry()").

This patch adds information for kernel 3.10 and above

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Jacob Keller
8401aa1f59 Documentation/SubmittingPatches: describe the Fixes: tag
Update the SubmittingPatches process to include howto about the new
'Fixes:' tag to be used when a patch fixes an issue in a previous commit
(found by git-bisect for example).

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Manuel Schölling
ef19470ef8 fs/fat/inode.c: clean up string initializations (char[] instead of char *)
Initializations like 'char *foo = "bar"' will create two variables: a
static string and a pointer (foo) to that static string.  Instead 'char
foo[] = "bar"' will declare a single variable and will end up in shorter
assembly (according to Jeff Garzik on the KernelJanitor's TODO list).

Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Conrad Meyer
190a8843de fs/fat/: add support for DOS 1.x formatted volumes
Add structure for parsed BPB information, struct fat_bios_param_block,
and move all of the deserialization and validation logic from
fat_fill_super() into fat_read_bpb().

Add a 'dos1xfloppy' mount option to infer DOS 2.x BIOS Parameter Block
defaults from block device geometry for ancient floppies and floppy
images, as a fall-back from the default BPB parsing logic.

When fat_read_bpb() finds an invalid FAT filesystem and dos1xfloppy is
set, fall back to fat_read_static_bpb().  fat_read_static_bpb()
validates that the entire BPB is zero, and that the floppy has a
DOS-style 8086 code bootstrapping header.  Then it fills in default BPB
values from media size and a table.[0]

Media size is assumed to be static for archaic FAT volumes.  See also:
[1].

Fixes kernel.org bug .

[0]: https://en.wikipedia.org/wiki/File_Allocation_Table#Exceptions
[1]: http://www.win.tue.nl/~aeb/linux/fs/fat/fat-1.html

[hirofumi@mail.parknet.co.jp: fix missed error code]
Signed-off-by: Conrad Meyer <cse.cem@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:10 -07:00
Fabian Frederick
a19189e553 fs/hpfs: increase pr_warn level
This patch applies a suggestion by Mikulas Patocka asking to increase
all pr_warn without commented ones to pr_err

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:10 -07:00