Store DSO's .text offset into DSO, used for VDSOs and will also be used for
other needs, like handling kernel modules.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-2-git-send-email-wangnan0@huawei.com
[ Extracted from larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is used by several other tools, better move it outside tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-34s9kue3xq9w5mijdmfrfx8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The topology test case of 'perf test' seems to be broken on my x86
system - due to the comparison of a "core-id" with # of CPUs online.
There are 8 online CPUs:
$ cat /sys/devices/system/cpu/online
0-7
but core-ids are not sequential and some core-ids exceed the number
of online CPUs.
$ cat /sys/devices/system/cpu/cpu?/topology/core_id
0
1
9
10
0
1
9
10
Looks like we can safely remove the check. Output before:
$ perf --version
perf version 4.4.rc1.g34258a
$ perf test -v topo
36: Test topology in session :
--- start ---
test child forked, pid 5906
templ file: /tmp/perf-test-vCwWG3
core_id number is too big.You may need to upgrade the perf tool.
test child interrupted
---- end ----
Test topology in session: FAILED!
and after:
$ perf test -v topo
36: Test topology in session :
--- start ---
test child forked, pid 6532
templ file: /tmp/perf-test-y10wFJ
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 9, socket 0
CPU 3, core 10, socket 0
CPU 4, core 0, socket 1
CPU 5, core 1, socket 1
CPU 6, core 9, socket 1
CPU 7, core 10, socket 1
test child finished with 0
---- end ----
Test topology in session: Ok
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20151203233219.GA27696@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Implement 'perf stat --metric-only' (Andi Kleen)
- Fix perf script python database export crash (Chris Phlipot)
Infrastructure:
- perf top/report --hierarchy assorted fixes for problems introduced in this
perf/core cycle (Namhyung Kim)
- Support '~' operation in libtraceevent (Steven Rosted)
Build fixes:
- Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF
devel files are not installed (Arnaldo Carvalho de Melo)
- Do not try building jitdump on unsupported arches (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UVtX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160310' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Implement 'perf stat --metric-only' (Andi Kleen)
- Fix perf script python database export crash (Chris Phlipot)
Infrastructure changes:
- perf top/report --hierarchy assorted fixes for problems introduced in this
perf/core cycle (Namhyung Kim)
- Support '~' operation in libtraceevent (Steven Rosted)
Build fixes:
- Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF
devel files are not installed (Arnaldo Carvalho de Melo)
- Do not try building jitdump on unsupported arches (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.001452803 158.91% 0.66 2.39 2.92%
2.002192321 180.63% 0.76 2.08 2.96%
3.003088282 150.59% 0.62 2.57 2.84%
4.004369835 196.20% 0.98 1.62 3.79%
5.005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item. But hotkey actions lacks these checks so
it can filter using incorrect info.
For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable. Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 2eafd410e6 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key. However the he->thread is still valid
even if 'pid' sort key is not given. Only thing it should not use is
the pid (or tid) of the thread. So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sort__has_comm variable is to check whether the comm sort key is
given. This is necessary to support thread filtering in the TUI hists
browser later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hierarchy mode is enabled, each entry in a hierarchy level shares
the period. IOW an upper level entry's period is the sum of lower level
entries. Thus perf uses only one of them to calculate the total period
of hists. It was lowest-level (leaf) entries but it has a problem when
it comes to filters.
If a filter is applied, entries in the same level will be filtered or
not. But upper level entries still have period of their sum including
filtered one. So total sum of upper level entries will not be same as
sum of lower level entries.
This resulted in entries having more than 100% of overhead and it can be
produced using perf top with filter(s).
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not used anymore and the output format is accessed by the hpp_list
pointer instead when hierarchy is enabled. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a command-line filter is applied in hierarchy mode, output is
broken especially when filtering on lower level. The higher level
entries doesn't show up so it's hard to see the results.
Also it needs to handle multi sort keys in a single hierarchy level.
Before:
$ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio
...
# Overhead CPU / Shared Object+Command
# ........... ...........................
#
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
11.89% [kernel.vmlinux] swapper
9.18% [kernel.vmlinux] swapper
After:
# Overhead CPU / Shared Object+Command
# ........... ...............................
#
33.09% 003
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
21.90% 002
11.89% [kernel.vmlinux] swapper
13.30% 001
9.18% [kernel.vmlinux] swapper
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions are for checkinf if a given perf_hpp_fmt is a
filter-related sort entry. With hierarchy mode, it needs to check
filters on the hist entries with its own hpp format list.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hierarchy mode is enabled each output format is in a separate hpp
list. So when applying a filter it should check all formats in the
list. Currently it only checks a single ->fmt field which was not set
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Build jitdump only on architectures defined in util/genelf.h file, to avoid
breaking the build on such arches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160310164113.GA11357@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to use a const char pointer, we can used char pointer
from the beginning and omit the unnecessary cast.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160308184230.GB7897@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass perf_hpp_list all the way through setup_sort_list so that the sort
entry can be added on the arbitrary list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160309100417.GA30910@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the union in evsel so that the database id and priv pointer can
be used simultainously without conflicting and crashing.
Detailed Description for the fixed bug follows:
perf script crashes with a segmentation fault on user space tool version
4.5.rc7.ge2857b when using the python database export API. It works
properly in 4.4 and prior versions.
the crash fist appeared in:
cfc8874a48 ("perf script: Process cpu/threads maps")
How to reproduce the bug:
Remove any temporary files left over from a previous crash (if you have
already attemped to reproduce the bug):
$ rm -r test_db-perf-data
$ dropdb test_db
$ perf record timeout 1 yes >/dev/null
$ perf script -s scripts/python/export-to-postgresql.py test_db
Stack Trace:
Program received signal SIGSEGV, Segmentation fault.
__GI___libc_free (mem=0x1) at malloc.c:2929
2929 malloc.c: No such file or directory.
(gdb) bt
at util/stat.c:122
argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231
argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390
at perf.c:451
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: cfc8874a48 ("perf script: Process cpu/threads maps")
Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While building on a Docker container for ubuntu and installing package
by package one ends up with:
MKDIR /tmp/build/util/
CC /tmp/build/util/genelf.o
util/genelf.c:22:19: fatal error: dwarf.h: No such file or directory
#include <dwarf.h>
^
compilation terminated.
mv: cannot stat '/tmp/build/util/.genelf.o.tmp': No such file or directory
Because the jitdump code needs the DWARF related development packages to
be installed. So make it dependent on that so that the build can succeed
without jitdump support.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-le498robnmxd40237wej3w62@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following upcoming upstream commit:
92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Adds _ASM_EXTABLE_FAULT(), which is not available in user-space
and breaks the build.
We don't really need _ASM_EXTABLE_FAULT() in user-space, so simply
wrap it to nothing.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Drop the quirk() function pointer in favor of a simple boolean which
says whether the quirk should be applied or not. Update comment while at
it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160308164041.GF16568@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ignore_nmis is used in two distinct places:
1. modified through {stop,restart}_nmi by alternative_instructions
2. read by do_nmi to determine if default_do_nmi should be called or not
thus the access pattern conforms to __read_mostly and do_nmi() is a fastpath.
Signed-off-by: Kostenzer Felix <fkostenzer@live.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported some time ago that some entries in the PEBS data source table
in perf do not agree with the SDM. We investigated and the bits
changed for Sandy Bridge, but the SDM was not updated.
perf already implements the bits correctly for Sandy Bridge
and later. This patch patches it up for Nehalem and Westmere.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1456871124-15985-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a Broadwell specific PEBS event constraint table.
Broadwell has a fix for the HT corruption bug erratum HSD29 on
Haswell. Therefore, there is no need to mark events 0xd0, 0xd1, 0xd2,
0xd3 has requiring the exclusive mode across both sibling HT threads.
This holds true for regular counting and sampling (see core.c) and
PEBS (ds.c) which we fix in this patch.
In doing so, we relax evnt scheduling for these events, they can now
be programmed on any 4 counters without impacting what is measured on
the sibling thread.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: adrian.hunter@intel.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1457034642-21837-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes an issue with the GLOBAL_OVERFLOW_STATUS bits on
Haswell, Broadwell and Skylake processors when using PEBS.
The SDM stipulates that when the PEBS iterrupt threshold is crossed,
an interrupt is posted and the kernel is interrupted. The kernel will
find GLOBAL_OVF_SATUS bit 62 set indicating there are PEBS records to
drain. But the bits corresponding to the actual counters should NOT be
set. The kernel follows the SDM and assumes that all PEBS events are
processed in the drain_pebs() callback. The kernel then checks for
remaining overflows on any other (non-PEBS) events and processes these
in the for_each_bit_set(&status) loop.
As it turns out, under certain conditions on HSW and later processors,
on PEBS buffer interrupt, bit 62 is set but the counter bits may be
set as well. In that case, the kernel drains PEBS and generates
SAMPLES with the EXACT tag, then it processes the counter bits, and
generates normal (non-EXACT) SAMPLES.
I ran into this problem by trying to understand why on HSW sampling on
a PEBS event was sometimes returning SAMPLES without the EXACT tag.
This should not happen on user level code because HSW has the
eventing_ip which always point to the instruction that caused the
event.
The workaround in this patch simply ensures that the bits for the
counters used for PEBS events are cleared after the PEBS buffer has
been drained. With this fix 100% of the PEBS samples on my user code
report the EXACT tag.
Before:
$ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase
$ perf report -D | fgrep SAMPLES
PERF_RECORD_SAMPLE(IP, 0x2): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y
\--- EXACT tag is missing
After:
$ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase
$ perf report -D | fgrep SAMPLES
PERF_RECORD_SAMPLE(IP, 0x4002): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y
\--- EXACT tag is set
The problem tends to appear more often when multiple PEBS events are used.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1457034642-21837-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a definition for GLOBAL_OVFL_STATUS bit 55
which is used with the Processor Trace (PT) feature.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1457034642-21837-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch tries to fix a PEBS warning found in my stress test. The
following perf command can easily trigger the pebs warning or spurious
NMI error on Skylake/Broadwell/Haswell platforms:
sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a
Also the NMI watchdog must be enabled.
For this case, the events number is larger than counter number. So
perf has to do multiplexing.
In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out
old events, rotate_ctx, schedule in new events and finally
perf_pmu_enable().
If the old events include precise event, the MSR_IA32_PEBS_ENABLE
should be cleared when perf_pmu_disable(). The MSR_IA32_PEBS_ENABLE
should keep 0 until the perf_pmu_enable() is called and the new event is
precise event.
However, there is a corner case which could restore PEBS_ENABLE to
stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL
will be set to 0 to stop overflow and followed PMI. But there may be
pending PMI from an earlier overflow, which cannot be stopped. So even
GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At
the end of the PMI handler, __intel_pmu_enable_all() will be called,
which will restore the stale values if old events haven't scheduled
out.
Once the stale pebs value is set, it's impossible to be corrected if
the new events are non-precise. Because the pebs_enabled will be set
to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE
setting. As a result, the following NMI with stale PEBS_ENABLE
trigger pebs warning.
The pending PMI after enabled=0 will become harmless if the NMI handler
does not change the state. This patch checks cpuc->enabled in pmi and
only restore the state when PMU is active.
Here is the dump:
Call Trace:
<NMI> [<ffffffff813c3a2e>] dump_stack+0x63/0x85
[<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0
[<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320
[<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460
[<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
[<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330
[<ffffffff811f2f11>] ? unmap_kernel_range_noflush+0x11/0x20
[<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0
[<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170
[<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50
[<ffffffff810310b9>] nmi_handle+0x69/0x120
[<ffffffff810316f6>] default_do_nmi+0xe6/0x100
[<ffffffff810317f2>] do_nmi+0xe2/0x130
[<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e
[<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
[<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
[<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
<<EOE>> <IRQ> [<ffffffff81006df8>] ? x86_perf_event_set_period+0xd8/0x180
[<ffffffff81006eec>] x86_pmu_start+0x4c/0x100
[<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300
[<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10
[<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280
[<ffffffff8119c970>] ? __perf_install_in_context+0xc0/0xc0
[<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280
[<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190
[<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0
[<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60
[<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50
[<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0
<EOI> [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0
[<ffffffff81123de5>] ? smp_call_function_single+0xd5/0x130
[<ffffffff81123ddb>] ? smp_call_function_single+0xcb/0x130
[<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0
[<ffffffff8119765a>] event_function_call+0x10a/0x120
[<ffffffff8119c660>] ? ctx_resched+0x90/0x90
[<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30
[<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
[<ffffffff8119772b>] _perf_event_enable+0x5b/0x70
[<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0
[<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
[<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0
[<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0
[<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0
[<ffffffff81036d29>] ? sched_clock+0x9/0x10
[<ffffffff8124a919>] SyS_ioctl+0x79/0x90
[<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
---[ end trace aef202839fe9a71d ]---
Uhhuh. NMI received for unknown reason 2d on CPU 2.
Do you have a strange power saving mode enabled?
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1457046448-6184-1-git-send-email-kan.liang@intel.com
[ Fixed various typos and other small details. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Using PAGE_SIZE buffers makes the WRMSR to PERF_GLOBAL_CTRL in
intel_pmu_enable_all() mysteriously hang on Core2. As a workaround, we
don't do this.
The hard lockup is easily triggered by running 'perf test attr'
repeatedly. Most of the time it gets stuck on sample session with
small periods.
# perf test attr -vv
14: struct perf_event_attr setup :
--- start ---
...
'PERF_TEST_ATTR=/tmp/tmpuEKz3B /usr/bin/perf record -o /tmp/tmpuEKz3B/perf.data -c 123 kill >/dev/null 2>&1' ret 1
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160301190352.GA8355@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The error path in perf_event_open() is such that asking for a sampling
event on a PMU that doesn't generate interrupts will end up in dropping
the perf_sched_count even though it hasn't been incremented for this
event yet.
Given a sufficient amount of these calls, we'll end up disabling
scheduler's jump label even though we'd still have active events in the
system, thereby facilitating the arrival of the infernal regions upon us.
I'm fixing this by moving account_event() inside perf_event_alloc().
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1456917854-29427-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow grouping multiple sort keys per 'perf report/top --hierarchy'
level (Namhyung Kim)
- Document 'perf stat --detailed' option (Borislav Petkov)
Infrastructure changes:
- jitdump prep work for supporting it with Intel PT (Adrian Hunter)
- Use 64-bit shifts with (TSC) time conversion (Adrian Hunter)
Fixes:
- Explicitly declare inc_group_count as a void function (Colin Ian King)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-8-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-7-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Use this info to print entries with multiple sort keys in a
single hierarchy properly.
For example, the below example shows using 4 sort keys with 2 levels.
$ perf report --hierarchy -s '{prev_pid,prev_comm},{next_pid,next_comm}' \
--percent-limit 1 -i perf.data.sched
...
# Overhead prev_pid+prev_comm / next_pid+next_comm
# ........... .......................................
#
22.36% 0 swapper/0
9.48% 17773 transmission-gt
5.25% 109 kworker/0:1H
1.53% 6524 Xephyr
21.39% 17773 transmission-gt
9.52% 0 swapper/0
9.04% 0 swapper/2
1.78% 0 swapper/3
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-6-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When multiple sort keys are used in a single hierarchy, it should indent
using number of hierarchy levels instead of number of sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-5-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This implements having multiple sort keys in a single hierarchy level.
Originally only single sort key is supported for each level, but now
using the group syntax with '{ }', it can set more than one sort key in
one level. Note that now it needs to quote in order to prevent shell
interpretation.
For example:
$ perf report --hierarchy -s '{comm,dso},sym'
...
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
48.67% swapper [kernel.vmlinux]
34.42% [k] intel_idle
1.30% [k] __tick_nohz_idle_enter
1.03% [k] cpuidle_reflect
8.87% firefox libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
1.18% [.] pthread_cond_signal@@GLIBC_2.3.2
1.09% [.] 0x000000000000ff4b
6.11% Xorg libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
In the above example, the command name and the shared object name are
shown on the same line but the symbol name is on the different line.
Since the first two are grouped by '{}', they are in the same level.
Suggested-and-Tested=by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-4-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now each hists has its own hpp lists in hierarchy. So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level. This will be used to support multiple sort keys
in a single hierarchy level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys). Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.
Add the text from
2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
which added the incrementing aspect to -d.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The level field is to distinguish levels in the hierarchy mode.
Currently each column (perf_hpp_fmt) has a different level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457103582-28396-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit b9511cd761 ("perf/x86: Fix time_shift in perf_event_mmap_page")
altered the time conversion algorithms documented in the perf_event.h
header file, to use 64-bit shifts. That was done to make the code more
future-proof (i.e. some time in the future a 32-bit shift could be
allowed). Reflect those changes in perf tools.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move clockid validation into jit_process() so it can later be made
conditional.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for moving clockid validation into jit_process().
Previously a return value of zero meant the processing had been done and
non-zero meant either the processing was not done (i.e. not the jitdump
file mmap event) or an error occurred.
Change it so that zero means the processing was not done, one means the
processing was done and successful, and negative values are an error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the stubs are identical so just have one function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, when injecting build ids, if there is AUX data then 'perf
inject' hits all DSOs because it is not known which DSOs the trace data
would hit.
That needs to be done for JIT injection also, and in fact there is no
reason to distinguish what kind of injection is being done. That is,
any time there is AUX data and the HEADER_BUID_ID feature flag is set,
and the AUX data is not being processed, then hit all DSOs. This patch
does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The return type is not defined, so it defaults to int, however, the
function is not returning anything, so this is clearly not correct. Make
it a void function.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457008214-14393-1-git-send-email-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Check existence of frontend/backed stalled cycles in 'perf stat' (Andi Kleen)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
- Support metrics in 'perf stat' --per-core/socket mode (Andi Kleen)
- Avoid installing .o files from tools/lib/ into the python extension (Jiri Olsa)
- Rename the tracepoint '/format' field that carries the syscall ID from 'nr',
that is also the name of some syscalls arguments, to "__syscall_nr", to
avoid having multiple fields with the same name, that was breaking the
python script skeleton generator from perf.data files (Taeung Song)
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Fix segfault in 'perf test' hists related entries (Arnaldo Carvalho de Melo)
- Fix output of %llu for 64 bit values read on 32 bit machines in libtraceevent (Steven Rostedt)
- Fix time stamp rounding issue in libtraceevent (Chaos.Chen)
Infrastructure:
- Fix setlocale() breakage in the pmu parsing code (Jiri Olsa)
- Split libtraceevent's pevent_print_event() (Steven Rostedt)
- Librarize some 'perf record' bits to allow handling multiple perf.data
files per session (Wang Nan)
- Ensure return non-zero rc when mmap fails in 'perf record' (Wang Nan)
- Fix double free on 'command_line' in a error path in 'perf script' (Colin Ian King)
- Initialize struct sigaction 'sa_flags' field in a 'perf test' entry (Colin Ian King)
- Fix various build warnings in turbostat, detected with gcc6 (Colin Ian King)
- Use .s extension for preprocessed assembler code (Masahiro Yamada)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+/I9
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160303' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes:
User visible changes:
- Check existence of frontend/backed stalled cycles in 'perf stat' (Andi Kleen)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
- Support metrics in 'perf stat' --per-core/socket mode (Andi Kleen)
- Avoid installing .o files from tools/lib/ into the python extension (Jiri Olsa)
- Rename the tracepoint '/format' field that carries the syscall ID from 'nr',
that is also the name of some syscalls arguments, to "__syscall_nr", to
avoid having multiple fields with the same name, that was breaking the
python script skeleton generator from perf.data files (Taeung Song)
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Fix segfault in 'perf test' hists related entries (Arnaldo Carvalho de Melo)
- Fix output of %llu for 64 bit values read on 32 bit machines in libtraceevent (Steven Rostedt)
- Fix time stamp rounding issue in libtraceevent (Chaos.Chen)
Infrastructure changes:
- Fix setlocale() breakage in the pmu parsing code (Jiri Olsa)
- Split libtraceevent's pevent_print_event() (Steven Rostedt)
- Librarize some 'perf record' bits to allow handling multiple perf.data
files per session (Wang Nan)
- Ensure return non-zero rc when mmap fails in 'perf record' (Wang Nan)
- Fix double free on 'command_line' in a error path in 'perf script' (Colin Ian King)
- Initialize struct sigaction 'sa_flags' field in a 'perf test' entry (Colin Ian King)
- Fix various build warnings in turbostat, detected with gcc6 (Colin Ian King)
- Use .s extension for preprocessed assembler code (Masahiro Yamada)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
