Commit Graph

587 Commits

Author SHA1 Message Date
Dave Airlie
1922756124 drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
This fixes CVE-2011-1013.

Reported-by: Matthiew Herrb (OpenBSD X.org team)
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-28 15:24:35 +10:00
Ben Skeggs
8f7286f8e4 drm/nv50: support for compression
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-25 06:46:07 +10:00
Dave Airlie
a2c06ee2fe Revert "ttm: Include the 'struct dev' when using the DMA API."
This reverts commit 5a893fc28f.

This causes a use after free in the ttm free alloc pages path,
when it tries to get the be after the be has been destroyed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 14:24:01 +10:00
Dave Airlie
63871f89d1 Merge branch 'drm-mm-cleanup' into drm-next
* drm-mm-cleanup:
  radeon: move blit functions to radeon_asic.h
  radeon: kill decls for inline functions
  radeon: consolidate asic-specific function decls for r600 & later
  drm/radeon: kill radeon_bo->gobj pointer
  drm/radeon: introduce gem_to_radeon_bo helper
  drm/radeon: embed struct drm_gem_object
  drm: mm: add helper to unwind scan state
  drm: mm: add api for embedding struct drm_mm_node
  drm: mm: extract node insert helper functions
  drm: mm: track free areas implicitly
  drm/nouveau: don't munge in drm_mm internals
2011-02-23 12:07:27 +10:00
Dave Airlie
de1e7cd63a Merge branch 'stable/ttm.pci-api.v5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into drm-next
* 'stable/ttm.pci-api.v5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  ttm: Include the 'struct dev' when using the DMA API.
  nouveau/ttm/PCIe: Use dma_addr if TTM has set it.
  radeon/ttm/PCIe: Use dma_addr if TTM has set it.
  ttm: Expand (*populate) to support an array of DMA addresses.
  ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set.
  ttm: Introduce a placeholder for DMA (bus) addresses.
2011-02-23 12:06:39 +10:00
Chris Wilson
7811bddb66 drm: Remove unused members from struct drm_open_hash
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 11:16:40 +10:00
Chris Wilson
b1f559ecdc drm: Mark constant arrays of drm_display_mode const
... and fixup some methods to accept the constant argument.

Now that constant module arrays are loaded into read-only memory, using
const appropriately has some benefits beyond warning the programmer
about likely mistakes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 11:13:11 +10:00
Daniel Vetter
ae0cec2880 drm: mm: add helper to unwind scan state
With the switch to implicit free space accounting one pointer
got unused when scanning. Use it to create a single-linked list
to ensure correct unwinding of the scan state.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:32:57 +10:00
Daniel Vetter
b0b7af1884 drm: mm: add api for embedding struct drm_mm_node
The old api has a two-step process: First search for a suitable
free hole, then allocate from that specific hole. No user used
this to do anything clever. So drop it for the embeddable variant
of the drm_mm api (the old one retains this ability, for the time
being).

With struct drm_mm_node embedded, we cannot track allocations
anymore by checking for a NULL pointer. So keep track of this
and add a small helper drm_mm_node_allocated.

Also add a function to move allocations between different struct
drm_mm_node.

v2: Implement suggestions by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:32:51 +10:00
Daniel Vetter
ea7b1dd448 drm: mm: track free areas implicitly
The idea is to track free holes implicitly by marking the allocation
immediatly preceeding a hole.

To avoid an ugly corner case add a dummy head_node to struct drm_mm
to track the hole that spans to complete allocation area when the
memory manager is empty.

To guarantee that there's always a preceeding/following node (that might
be marked as hole_follows == 1), move the mm->node_list list_head to the
head_node.

The main allocator and fair-lru scan code actually becomes simpler.
Only the debug code slightly suffers because free areas are no longer
explicit.

Also add drm_mm_for_each_node (which will be much more useful when
struct drm_mm_node is embeddable).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:32:34 +10:00
Daniel Vetter
31a5b8ce8f drm/nouveau: don't munge in drm_mm internals
Nouveau was checking drm_mm internals on teardown to see whether the
memory manager was initialized. Hide these internals in a small
inline helper function.

Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:18:20 +10:00
Konrad Rzeszutek Wilk
5a893fc28f ttm: Include the 'struct dev' when using the DMA API.
This makes the accounting when using 'debug_dma_dump_mappings()'
and CONFIG_DMA_API_DEBUG=y be assigned to the correct device
instead of 'fallback'.

No functional change - just cosmetic.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-22 13:26:23 -05:00
Dave Airlie
a250b9fdc5 drm: add usb framework
This adds an initial framework to plug USB graphics devices
into the drm/kms subsystem.

I've started writing a displaylink driver using this interface.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 13:09:42 +10:00
Dave Airlie
8410ea3b95 drm: rework PCI/platform driver interface.
This abstracts the pci/platform interface out a step further,
we can go further but this is far enough for now to allow USB
to be plugged in.

The drivers now just call the init code directly for their
device type.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 13:09:36 +10:00
Dave Airlie
ff72145bad drm: dumb scanout create/mmap for intel/radeon (v3)
This is just an idea that might or might not be a good idea,
it basically adds two ioctls to create a dumb and map a dumb buffer
suitable for scanout. The handle can be passed to the KMS ioctls to create
a framebuffer.

It looks to me like it would be useful in the following cases:
a) in development drivers - we can always provide a shadowfb fallback.
b) libkms users - we can clean up libkms a lot and avoid linking
to libdrm_*.
c) plymouth via libkms is a lot easier.

Userspace bits would be just calls + mmaps. We could probably
mark these handles somehow as not being suitable for acceleartion
so as top stop people who are dumber than dumb.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 12:16:14 +10:00
Arnd Bergmann
7f50684717 drm: remove i830 driver
This driver is one of the last users of the big kernel
lock, which is going away. All the hardware supported
by this driver also works with the newer i915 driver,
and recent X.org releases only work with that driver
anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 12:14:18 +10:00
Alex Deucher
63a507800c drm/radeon: remove 0x4243 pci id
0x4243 is a PCI bridge, not a GPU.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33815

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02 12:50:41 +10:00
Dave Airlie
a55205e229 Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixes
* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
  drm/i915: Only bind to function 0 of the PCI device
  drm/i915: Suppress spurious vblank interrupts
  drm: Avoid leak of adjusted mode along quick set_mode paths
  drm: Simplify and defend later checks when disabling a crtc
  drm: Don't switch fb when disabling an output
  drm/i915: Reset crtc after resume
  drm/i915/crt: Force the initial probe after reset
  drm/i915: Reset state after a GPU reset or resume
  drm: Add an interface to reset the device
  drm/i915/sdvo: If at first we don't succeed in reading the response, wait
2011-02-02 11:22:34 +10:00
Chris Wilson
78c6e170ba drm/i915: Suppress spurious vblank interrupts
Hugh Dickins found that characters in xterm were going missing and oft
delayed. Being the curious type, he managed to associate this with the
new high-precision vblank patches; disabling these he found, restored
the orderliness of his characters.

The oddness begins when one realised that Hugh was not using vblanks at
all on his system (fvwm and some xterms). Instead, all he had to go on
were warning of a pipe underrun, curiously enough at around 60Hz. He
poked and found that in addition to the underrun warning, the hardware
was flagging the start of a new frame, a vblank, which in turn was
kicking off the pending vblank processing code.

There is little we can do for the underruns on Hugh's machine, a
Crestline [965GM], which must have its FIFO watermarks set to 8.
However, we do not need to process the vblank if we know that they are
disabled...

Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31 12:38:47 +00:00
Konrad Rzeszutek Wilk
27e8b23794 ttm: Expand (*populate) to support an array of DMA addresses.
We pass in the array of ttm pages to be populated in the GART/MM
of the card (or AGP). Patch titled: "ttm: Utilize the DMA API for
pages that have TTM_PAGE_FLAG_DMA32 set." uses the DMA API to make
those pages have a proper DMA addresses (in the situation where
page_to_phys or virt_to_phys do not give use the DMA (bus) address).

Since we are using the DMA API on those pages, we should pass in the
DMA address to this function so it can save it in its proper fields
(later patches use it).

[v2: Added reviewed-by tag]

Reviewed-by: Thomas Hellstrom <thellstrom@shipmail.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
2011-01-27 16:07:58 -05:00
Konrad Rzeszutek Wilk
f9820a46dd ttm: Introduce a placeholder for DMA (bus) addresses.
This is right now limited to only non-pool constructs.

[v2: Fixed indentation issues, add review-by tag]

Reviewed-by: Thomas Hellstrom <thomas@shipmail.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
2011-01-27 16:02:31 -05:00
Chris Wilson
eb03355660 drm: Add an interface to reset the device
Iterate over the attached CRTCs, encoders and connectors and call the
supplied reset vfunc in order to reset any cached state back to unknown.
Useful after an invalidation event such as a GPU reset or resuming.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25 19:23:28 +00:00
Alex Deucher
58bbf018a7 drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq
Needed for timer queries in the 3D driver.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-25 08:41:04 +10:00
Dave Airlie
3632ef8909 Revert "drm: Update fbdev fb_fix_screeninfo"
This reverts commit dfe63bb0ad.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 16:10:28 -08:00
Dave Airlie
c3307cd6a7 Merge branch 'drm-radeon-ni' of ../drm-radeon-next into drm-core-next
* 'drm-radeon-ni' of ../drm-radeon-next: (30 commits)
  radeon: consolidate asic-specific function decls for pre-r600
  drm/radeon/kms: add NI pci ids
  drm/radeon/kms: don't enable pcie gen2 on NI yet
  drm/radeon/kms: add radeon_asic struct for NI asics
  drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
  drm/radeon/kms: add ucode loader for NI
  drm/radeon/kms: add support for DCE5 display LUTs
  drm/radeon/kms: add ni_reg.h
  drm/radeon/kms: add bo blit support for NI
  drm/radeon/kms: always use writeback/events for fences on NI
  drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
  drm/radeon/kms: add backend map workaround for barts
  drm/radeon/kms: fill gpu init for NI asics
  drm/radeon/kms: add disabled vbios accessor for NI asics
  drm/radeon/kms: handle NI thermal controller
  drm/radeon/kms: parse DCE5 encoder caps when setting up encoders
  drm/radeon/kms: dvo dpms updates for DCE5
  drm/radeon/kms: dac dpms updates for DCE5
  drm/radeon/kms: DCE5 atom dig encoder updates
  drm/radeon/kms: DCE5 atom transmitter control updates
  ...
2011-01-10 09:27:06 +10:00
Alex Deucher
2b2fd604bd drm/radeon/kms: add NI pci ids
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:44 +10:00
James Simmons
dfe63bb0ad drm: Update fbdev fb_fix_screeninfo
If you change the color depth via fbset or some other framebuffer aware
userland application struct fb_fix_screeninfo is not updated to this new
information. This patch fixes this issue. Also the function is changed to
just pass in struct drm_framebuffer so in the future we could use more
fields. I'm hoping some day fix->smem* could be set here :-)

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 13:44:40 +10:00
Marek Olšák
9eba4a93ce drm/radeon/kms: manage r300 CMASK RAM access and allow CMASK clear
The CMASK RAM is for colorbuffer compression (used in conjunction
with MSAA). Only one user (filp) can access it.

The CMASK RAM access is managed in the same way as Hyper-Z, but there is
a separate ioctl, because an app that uses MSAA does not necessarily
have to use zbuffering.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 13:00:45 +10:00
Dave Airlie
5bcf719b7d drm/switcheroo: track state of switch in drivers.
We need to track the state of the switch in drivers, so that after s/r
we don't resume the card we've explicitly switched off before. Also
don't allow a userspace open to occur if we've switched the gpu off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:45:30 +10:00
Chris Wilson
72bfa19c8d drm/i915: Allow the application to choose the constant addressing mode
The relative-to-general state default is useless as it means having to
rewrite the streaming kernels for each batch. Relative-to-surface is
more useful, as that stream usually needs to be rewritten for each
batch. And absolute addressing mode, vital if you start streaming
state, is also only available by adjusting the register...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-20 09:41:36 +00:00
Chris Wilson
d8c58fabd7 Merge remote branch 'airlied/drm-core-next' into drm-intel-next 2010-12-16 21:02:15 +00:00
Chris Wilson
5aa7d52aeb Merge branch 'drm-intel-fixes' into drm-intel-next
Immediate merge for the conflicting introduction of HAS_COHERENT_RINGS.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	include/drm/i915_drm.h
2010-12-05 10:43:39 +00:00
Daniel Vetter
bbf0c6b362 drm/i915: announce to userspace that the bsd ring is coherent
Otherwise we can't really fix the abi-braindeadness of forcing
libva to manually wait for rendering when switching rings. Which
in turn makes implementing hw semaphores a pointless exercise
(at least for ironlake).

[Also added the relaxed fencing param to explain the jump in
numbering - relaxed fencing is in -next.]

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-05 10:40:39 +00:00
Ben Skeggs
6d6c5a157a drm/nouveau: remove some useless GETPARAMs
These have been unused since UMS support was ripped out, so lets remove
them completely.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-03 15:11:57 +10:00
Francisco Jerez
332b242f47 drm/nouveau: Implement the pageflip ioctl.
nv0x-nv4x should be mostly fine, nv50 doesn't work yet.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-03 15:11:12 +10:00
Ben Skeggs
21e86c1c8a drm/nouveau: remove cpu_writers lock
No other driver uses this, and userspace should be responsible for handling
locking between them if they share BOs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-03 15:05:22 +10:00
Dave Airlie
f7eb0c5541 Merge branch 'drm-radeon-fusion' of ../drm-radeon-next into drm-core-next
* 'drm-radeon-fusion' of ../drm-radeon-next:
  drm/radeon/kms: add Ontario APU ucode loading support
  drm/radeon/kms: add Ontario Fusion APU pci ids
  drm/radeon/kms: enable MSIs on fusion APUs
  drm/radeon/kms: add power table parsing support for Ontario fusion APUs
  drm/radeon/kms: refactor atombios power state fetching
  drm/radeon/kms: add bo blit support for Ontario fusion APUs
  drm/radeon/kms: add thermal sensor support for fusion APUs
  drm/radeon/kms: fill in GPU init for AMD Ontario Fusion APUs
  drm/radeon/kms: add radeon_asic struct for AMD Ontario fusion APUs
  drm/radeon/kms: evergreen.c updates for fusion
  drm/radeon/kms: MC setup changes for fusion APUs
  drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup function
  drm/radeon/kms: add support for ss overrides on Fusion APUs
  drm/radeon/kms: Add support for external encoders on fusion APUs
  drm/radeon/kms: atom changes for DCE4.1 devices
  drm/radeon/kms: add new family id for AMD Ontario APUs
  drm/radeon/kms: upstream power table updates
  drm/radeon/kms: upstream atombios.h updates
  drm/radeon/kms: upstream ObjectID.h updates
  drm/radeon/kms: setup mc chremap properly on r7xx/evergreen
2010-12-03 14:01:08 +10:00
Daniel Vetter
4080775b60 intel-gtt: export api for drm/i915
Just some minor shuffling to get rid of any agp traces in the
exported functions.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:47 +00:00
Daniel Vetter
4af72e2865 drm: kill drm_agp_chipset_flush
No longer used.

Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:44 +00:00
Daniel Vetter
40ce657510 drm/i915/gtt: call chipset flush directly
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:44 +00:00
Daniel Vetter
23ed992a5e drm/i915|intel-gtt: consolidate intel-gtt.h headers
... and a few other defines.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:43 +00:00
Chris Wilson
c64f7ba5f1 agp/intel: Remove confusion of stolen entries not stolen memory
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 15:43:18 +00:00
Alex Deucher
11fa1618e3 drm/radeon/kms: add Ontario Fusion APU pci ids
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23 09:23:34 +10:00
Chris Wilson
e624ae8e0d Merge branch 'drm-intel-fixes' into drm-intel-next
Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
2010-11-22 08:51:36 +00:00
Thomas Hellstrom
eba67093f5 drm/ttm: Fix up io_mem_reserve / io_mem_free calling
This patch attempts to fix up shortcomings with the current calling
sequences.

1) There's a fastpath where no locking occurs and only io_mem_reserved is
   called to obtain needed info for mapping. The fastpath is set per
   memory type manager.
2) If the fastpath is disabled, io_mem_reserve and io_mem_free will be exactly
   balanced and not called recursively for the same struct ttm_mem_reg.
3) Optionally the driver can choose to enable a per memory type manager LRU
   eviction mechanism that, when io_mem_reserve returns -EAGAIN will attempt
   to kill user-space mappings of memory in that manager to free up needed
   resources

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:25:22 +10:00
Thomas Hellstrom
6570596202 drm/ttm/vmwgfx: Have TTM manage the validation sequence.
Rather than having the driver supply the validation sequence, leave that
responsibility to TTM. This saves some confusion and a function argument.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:25:21 +10:00
Thomas Hellstrom
95762c2b34 drm/ttm: Improved fencing of buffer object lists
Drastically reduce the number of spin lock / unlock operations by performing
unreserving and fencing under global locks.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:25:20 +10:00
Thomas Hellstrom
702adba224 drm/ttm/radeon/nouveau: Kill the bo lock in favour of a bo device fence_lock
The bo lock used only to protect the bo sync object members, and since it
is a per bo lock, fencing a buffer list will see a lot of locks and unlocks.
Replace it with a per-device lock that protects the sync object members on
*all* bos. Reading and setting these members will always be very quick, so
the risc of heavy lock contention is microscopic. Note that waiting for
sync objects will always take place outside of this lock.

The bo device fence lock will eventually be replaced with a seqlock /
rcu mechanism so we can determine that a bo is idle under a
rcu / read seqlock.

However this change will allow us to batch fencing and unreserving of
buffers with a minimal amount of locking.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:25:18 +10:00
Thomas Hellstrom
96726fe50f drm/ttm: Don't deadlock on recursive multi-bo reservations
Add an aid for the driver to detect deadlocks on multi-bo reservations
Update documentation.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:25:17 +10:00
Dave Airlie
d6ea88865d drm/ttm: Add a bo list reserve fastpath (v2)
Makes it possible to reserve a list of buffer objects with a single
spin lock / unlock if there is no contention.
Should improve cpu usage on SMP kernels.

v2: Initialize private list members on reserve and don't call
ttm_bo_list_ref_sub() with zero put_count.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 13:24:40 +10:00
Mario Kleiner
27641c3f00 drm/vblank: Add support for precise vblank timestamping.
The DRI2 swap & sync implementation needs precise
vblank counts and precise timestamps corresponding
to those vblank counts. For conformance to the OpenML
OML_sync_control extension specification the DRM
timestamp associated with a vblank count should
correspond to the start of video scanout of the first
scanline of the video frame following the vblank
interval for that vblank count.

Therefore we need to carry around precise timestamps
for vblanks. Currently the DRM and KMS drivers generate
timestamps ad-hoc via do_gettimeofday() in some
places. The resulting timestamps are sometimes not
very precise due to interrupt handling delays, they
don't conform to OML_sync_control and some are wrong,
as they aren't taken synchronized to the vblank.

This patch implements support inside the drm core
for precise and robust timestamping. It consists
of the following interrelated pieces.

1. Vblank timestamp caching:

A per-crtc ringbuffer stores the most recent vblank
timestamps corresponding to vblank counts.

The ringbuffer can be read out lock-free via the
accessor function:

struct timeval timestamp;
vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp).

The function returns the current vblank count and
the corresponding timestamp for start of video
scanout following the vblank interval. It can be
used anywhere between enclosing drm_vblank_get(dev, crtcid)
and drm_vblank_put(dev,crtcid) statements. It is used
inside the drmWaitVblank ioctl and in the vblank event
queueing and handling. It should be used by kms drivers for
timestamping of bufferswap completion.

The timestamp ringbuffer is reinitialized each time
vblank irq's get reenabled in drm_vblank_get()/
drm_update_vblank_count(). It is invalidated when
vblank irq's get disabled.

The ringbuffer is updated inside drm_handle_vblank()
at each vblank irq.

2. Calculation of precise vblank timestamps:

drm_get_last_vbltimestamp() is used to compute the
timestamp for the end of the most recent vblank (if
inside active scanout), or the expected end of the
current vblank interval (if called inside a vblank
interval). The function calls into a new optional kms
driver entry point dev->driver->get_vblank_timestamp()
which is supposed to provide the precise timestamp.
If a kms driver doesn't implement the entry point or
if the call fails, a simple do_gettimeofday() timestamp
is returned as crude approximation of the true vblank time.

A new drm module parameter drm.timestamp_precision_usec
allows to disable high precision timestamps (if set to
zero) or to specify the maximum acceptable error in
the timestamps in microseconds.

Kms drivers could implement their get_vblank_timestamp()
function in a gpu specific way, as long as returned
timestamps conform to OML_sync_control, e.g., by use
of gpu specific hardware timestamps.

Optionally, kms drivers can simply wrap and use the new
utility function drm_calc_vbltimestamp_from_scanoutpos().
This function calls a new optional kms driver function
dev->driver->get_scanout_position() which returns the
current horizontal and vertical video scanout position
of the crtc. The scanout position together with the
drm_display_timing of the current video mode is used
to calculate elapsed time relative to start of active scanout
for the current video frame. This elapsed time is subtracted
from the current do_gettimeofday() time to get the timestamp
corresponding to start of video scanout. Currently
non-interlaced, non-doublescan video modes, with or
without panel scaling are handled correctly. Interlaced/
doublescan modes are tbd in a future patch.

3. Filtering of redundant vblank irq's and removal of
some race-conditions in the vblank irq enable/disable path:

Some gpu's (e.g., Radeon R500/R600) send spurious vblank
irq's outside the vblank if vblank irq's get reenabled.
These get detected by use of the vblank timestamps and
filtered out to avoid miscounting of vblanks.

Some race-conditions between the vblank irq enable/disable
functions, the vblank irq handler and the gpu itself (updating
its hardware vblank counter in the "wrong" moment) are
fixed inside vblank_disable_and_save() and
drm_update_vblank_count() by use of the vblank timestamps and
a new spinlock dev->vblank_time_lock.

The time until vblank irq disable is now configurable via
a new drm module parameter drm.vblankoffdelay to allow
experimentation with timeouts that are much shorter than
the current 5 seconds and should allow longer vblank off
periods for better power savings.

Followup patches will use these new functions to
implement precise timestamping for the intel and radeon
kms drivers.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 11:45:05 +10:00
Francisco Jerez
f13b32630d drm/nouveau: Expose some BO usage flags to userspace.
This will be needed for Z compression and to take smarter placement
decisions.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18 14:38:29 +10:00
Chris Wilson
c94f28c383 Merge branch 'drm-intel-fixes' into drm-intel-next
Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_ringbuffer.c
2010-11-15 06:49:30 +00:00
Thomas Hellstrom
7dfbbdcffe drm/ttm: Be consistent on ttm_bo_init() failures
Call destroy() on _all_ ttm_bo_init() failures, and make sure that
behavior is documented in the function description.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-10 11:52:19 +10:00
Thomas Hellstrom
3205bc242b drm/ttm: Documentation update
Remove an obsolete comment about mm nodes.
Document the new bo range manager interface.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09 13:33:15 +10:00
Chris Wilson
0f8c6d7ca9 drm/i915: Move the invalidate|flush information out of the device struct
... and into a local structure scoped for the single function in which
it is used.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-01 12:38:44 +00:00
Chris Wilson
a00b10c360 drm/i915: Only enforce fence limits inside the GTT.
So long as we adhere to the fence registers rules for alignment and no
overlaps (including with unfenced accesses to linear memory) and account
for the tiled access in our size allocation, we do not have to allocate
the full fenced region for the object. This allows us to fight the bloat
tiling imposed on pre-i965 chipsets and frees up RAM for real use. [Inside
the GTT we still suffer the additional alignment constraints, so it doesn't
magic allow us to render larger scenes without stalls -- we need the
expanded GTT and fence pipelining to overcome those...]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-29 11:15:07 +01:00
Daniel Vetter
d935cc61d4 drm_mm: add support for range-restricted fair-lru scans
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-27 23:31:04 +01:00
Dave Airlie
e3ce8a0b27 Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-next
* 'intel/drm-intel-next' of ../drm-next: (63 commits)
  drm/i915: Move gpu_write_list to per-ring
  drm/i915: Invalidate the to-ring, flush the old-ring when updating domains
  drm/i915/ringbuffer: Write the value passed in to the tail register
  agp/intel: Restore valid PTE bit for Sandybridge after bdd3072
  drm/i915: Fix flushing regression from 9af90d19f
  drm/i915/sdvo: Remove unused encoding member
  i915: enable AVI infoframe for intel_hdmi.c [v4]
  drm/i915: Fix current fb blocking for page flip
  drm/i915: IS_IRONLAKE is synonymous with gen == 5
  drm/i915: Enable SandyBridge blitter ring
  drm/i915/ringbuffer: Remove broken intel_fill_struct()
  drm/i915/ringbuffer: Fix emit batch buffer regression from 8187a2b
  drm/i915: Copy the updated reloc->presumed_offset back to the user
  drm/i915: Track objects in global active list (as well as per-ring)
  drm/i915: Simplify most HAS_BSD() checks
  drm/i915: cache the last object lookup during pin_and_relocate()
  drm/i915: Do interrupible mutex lock first to avoid locking for unreference
  drivers: gpu: drm: i915: Fix a typo.
  agp/intel: Also add B43.1 to list of supported devices
  drm/i915: rearrange mutex acquisition for pread
  ...
2010-10-26 09:23:22 +10:00
Chris Wilson
549f736582 drm/i915: Enable SandyBridge blitter ring
Based on an original patch by Zhenyu Wang, this initializes the BLT ring for
SandyBridge and enables support for user execbuffers.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-21 19:08:39 +01:00
Thomas Hellstrom
40d857bba2 drm/ttm: Avoid using the ttm_mem_type_manager::put_locked function
Release the lru spinlock early.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-21 11:53:24 +10:00
Zhenyu Wang
8fe9790d16 drm/edid: add helper function to detect monitor audio capability
To help to determine if digital display port needs to enable
audio output or not. This one adds a helper to get monitor's
audio capability via EDID CEA extension block.

Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-19 09:17:32 +01:00
Chris Wilson
fb9a90f7c6 Merge remote branch 'airlied/drm-core-next' into tmp 2010-10-19 09:14:50 +01:00
Jason Wessel
21c74a8ea8 drm, kdb, kms: Change mode_set_base_atomic() enter argument to be an enum
The enter argument as implemented by commit 413d45d362 (drm, kdb, kms:
Add an enter argument to mode_set_base_atomic() API) should be more
descriptive as to what it does vs just passing 1 and 0 around.

There is no runtime behavior change as a result of this patch.

Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: David Airlie <airlied@linux.ie>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-19 14:13:33 +10:00
Dave Airlie
c9220b0f7c drm/ttm: add unlocked variant of new manager put node.
We need the unlocked variant for the new codepath introduced to fix the
race condition in master recently.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-19 09:49:42 +10:00
Dave Airlie
b7ae5056c9 Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-next
Conflicts:
	drivers/gpu/drm/i915/intel_fb.c
	drivers/gpu/drm/radeon/r600_blit_kms.c
	drivers/gpu/drm/ttm/ttm_bo.c
2010-10-19 09:48:34 +10:00
Jesse Barnes
9f0e7ff4b3 drm/i915: fetch eDP configuration data from the VBT
We need to use some of these values in eDP configurations, so be sure to
fetch them and store them in the i915 private structure.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-08 10:28:21 +01:00
Dave Airlie
96a03fce54 Merge branch 'drm-kdb-next' into drm-core-next
* drm-kdb-next:
  drm/nouveau/kms: Avoid a hang entering KDB with VT accel on.
  radeon, kdb, kms: Save and restore the LUT on atomic KMS enter/exit
  drm, kdb, kms: Add an enter argument to mode_set_base_atomic() API
  drm/nouveau/kms: Implement KDB debug hooks for nouveau KMS.
  drm/radeon/kms: Implement KDB debug hooks for radeon KMS.
2010-10-06 12:57:50 +10:00
Dave Airlie
0c8eb0dc65 Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-core-next
[airlied - add fix for vmwgfx build]

* 'nouveau/for-airlied' of ../drm-nouveau-next: (93 commits)
  drm/ttm: restructure to allow driver to plug in alternate memory manager
  drm/ttm: introduce utility function to free an allocated memory node
  drm/nouveau: fix thinkos in mem timing table recordlen check
  drm/nouveau: parse voltage from perf 0x40 entires
  drm/nouveau: don't use the default pll limits in table v2.1 on nv50+ cards
  drm/nv50: Fix large 3D performance regression caused by the interchannel sync patches.
  drm/nouveau: Synchronize buffer object moves in hardware.
  drm/nouveau: Use semaphores to handle inter-channel sync in hardware.
  drm/nouveau: Provide a means to have arbitrary work run on fence completion.
  drm/nouveau: Minor refactoring/cleanup of the fence code.
  drm/nouveau: Add a module option to force card POST.
  drm/nv50: prevent (IB_PUT == IB_GET) for occurring unless idle
  drm/nv0x-nv4x: Leave the 0x40 bit untouched when changing CRE_LCD.
  drm/nv30-nv40: Fix postdivider mask when writing engine/memory PLLs.
  drm/nouveau: Fix perf table parsing on BMP v5.25.
  drm/nouveau: fix required mode bandwidth calculation for DP
  drm/nouveau: fix typo in c2aa91afea5f7e7ae4530fabd37414a79c03328c
  drm/nva3: split pm backend out from nv50
  drm/nouveau: run perflvl and M table scripts on mem clock change
  drm/nouveau: pass perflvl struct to clock_pre()
  ...
2010-10-06 12:57:11 +10:00
Jason Wessel
413d45d362 drm, kdb, kms: Add an enter argument to mode_set_base_atomic() API
Some devices such as the radeon chips receive information from user
space which needs to be saved when executing an atomic mode set
operation, else the user space would have to be queried again for the
information.

This patch extends the mode_set_base_atomic() call to pass an argument
to indicate if this is an entry or an exit from an atomic kernel mode
set change.  Individual drm drivers can properly save and restore
state accordingly.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: David Airlie <airlied@linux.ie>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:50:31 +10:00
Thomas Hellstrom
30f47fc85d drm/vmwgfx: Add a parameter to get the max fb size
This can be used by the X server to restrict mode resolutions and size of
root pixmap.

Bump minor to announce this availability.
Bump driver date.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:29:58 +10:00
Thomas Hellstrom
02b001624f drm: vmwgfx: Add a struct drm_file parameter to the dirty framebuffer callback
This is needed for the callback to identify the caller and take
appropriate locks if needed.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:29:41 +10:00
Dave Airlie
fb7ba2114b Merge remote branch 'korg/drm-fixes' into drm-vmware-next
necessary for some of the vmware fixes to be pushed in.

Conflicts:
	drivers/gpu/drm/drm_gem.c
	drivers/gpu/drm/i915/intel_fb.c
	include/drm/drmP.h
2010-10-06 11:10:48 +10:00
Thomas Hellstrom
1df6a2ebd7 drm/ttm: Fix two race conditions + fix busy codepaths
This fixes a race pointed out by Dave Airlie where we don't take a buffer
object about to be destroyed off the LRU lists properly. It also fixes a rare
case where a buffer object could be destroyed in the middle of an
accelerated eviction.

The patch also adds a utility function that can be used to prematurely
release GPU memory space usage of an object waiting to be destroyed.
For example during eviction or swapout.

The above mentioned commit didn't queue the buffer on the delayed destroy
list under some rare circumstances. It also didn't completely honor the
remove_all parameter.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=615505
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591061

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 09:04:43 +10:00
Ben Skeggs
d961db75ce drm/ttm: restructure to allow driver to plug in alternate memory manager
Nouveau will need this on GeForce 8 and up to account for the GPU
reordering physical VRAM for some memory types.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 10:01:20 +10:00
Ben Skeggs
42311ff90d drm/ttm: introduce utility function to free an allocated memory node
Existing core code/drivers call drm_mm_put_block on ttm_mem_reg.mm_node
directly.  Future patches will modify TTM behaviour in such a way that
ttm_mem_reg.mm_node doesn't necessarily belong to drm_mm.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 10:00:34 +10:00
Chris Wilson
73aa808f10 drm: Move the GTT accounting to i915
Only drm/i915 does the bookkeeping that makes the information useful,
and the information maintained is driver specific, so move it out of the
core and into its single user.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
2010-10-01 14:45:20 +01:00
Chris Wilson
39b4d07aa3 drm: Hold the mutex when dropping the last GEM reference (v2)
In order to be fully threadsafe we need to check that the drm_gem_object
refcount is still 0 after acquiring the mutex in order to call the free
function. Otherwise, we may encounter scenarios like:

Thread A:                                        Thread B:
drm_gem_close
unreference_unlocked
kref_put                                         mutex_lock
...                                              i915_gem_evict
...                                              kref_get -> BUG
...                                              i915_gem_unbind
...                                              kref_put
...                                              i915_gem_object_free
...                                              mutex_unlock
mutex_lock
i915_gem_object_free -> BUG
i915_gem_object_unbind
kfree
mutex_unlock

Note that no driver is currently using the free_unlocked vfunc and it is
scheduled for removal, hasten that process.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454
Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:45 +10:00
Dave Airlie
29d08b3efd drm/gem: handlecount isn't really a kref so don't make it one.
There were lots of places being inconsistent since handle count
looked like a kref but it really wasn't.

Fix this my just making handle count an atomic on the object,
and have it increase the normal object kref.

Now i915/radeon/nouveau drivers can drop the normal reference on
userspace object creation, and have the handle hold it.

This patch fixes a memory leak or corruption on unload, because
the driver had no way of knowing if a handle had been actually
added for this object, and the fbcon object needed to know this
to clean itself up properly.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 09:17:44 +10:00
Chris Wilson
31dfbc9392 drm: Prune GEM vma entries
Hook the GEM vm open/close ops into the generic drm vm open/close so
that the private vma entries are created and destroy appropriately.
Fixes the leak of the drm_vma_entries during the lifetime of the filp.

Reported-by: Matt Mackall <mpm@selenic.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28 09:14:34 +10:00
Dave Airlie
f459ffbdfd drm/radeon: fix PCI ID 5657 to be an RV410
fixes https://bugzilla.kernel.org/show_bug.cgi?id=19012

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-27 09:21:28 +10:00
Dave Airlie
4a445f291a Merge remote branch 'origin/master' of /home/airlied/kernel//linux-2.6 into drm-core-next 2010-09-24 15:37:33 +10:00
Daniel Vetter
0af9e92e77 intel-gtt: clean up gtt size reporting
Consolidate everything in intel-gtt.c and also kill the export
of intel_max_stolen.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:40:06 +01:00
Chris Wilson
e9e5f8e8d3 Merge branch 'drm-intel-fixes' into HEAD
Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/i915/intel_crt.c
2010-09-21 11:19:32 +01:00
Chris Wilson
930a9e2835 drm: Use a nondestructive mode for output detect when polling (v2)
v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14 20:38:48 +10:00
Chris Wilson
7b334fcb45 drm: Use a nondestructive mode for output detect when polling
Destructive load-detection is very expensive and due to failings
elsewhere can trigger system wide stalls of up to 600ms. A simple
first step to correcting this is not to invoke such an expensive
and destructive load-detection operation automatically.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:29:11 +10:00
Daniel Vetter
1996675432 drm/i915: die, i915_probe_agp, die
Use the detection from intel-gtt.ko instead. Hooray!

Also move the stolen mem allocator to the other gtt stuff in dev_prv->mem.

v2: Chris Wilson noted that my error handling was crap. Fix it. He also
said that this fixes a problem on his i845. Indeed, i915_probe_agp
misses a special case for i830/i845 stolen mem detection.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=25476
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 21:20:21 +01:00
Daniel Vetter
0ade638655 intel-gtt: introduce drm/intel-gtt.h
Add a few definitions to it that are already shared and that will
be shared in the future (like the number of stolen entries).
No functional changes in here.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 21:20:07 +01:00
Daniel Vetter
cbc60ca04b drm: kill get_reg_ofs callback
Every driver used the default implementation. Fold that one into
the only callsite and drop the callback.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:44:56 +10:00
Daniel Vetter
df8fcb0966 drm: kill dev->timer
Totally unused.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:44:54 +10:00
Daniel Vetter
89c372647d drm: kill agp indirection mess
There's no point in jumping through two indirections. So kill one
and call the kernels agp functions directly.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:44:40 +10:00
Daniel Vetter
8f879194f8 drm: replace drawable ioctl by noops
The information supplied by userspace through these ioctls is only
accessible by dev->drw_idr. But there's no in-tree user of that.
Also userspace does not really care about return values of these ioctls,
either. Only hw/xfree86/dri/dri.c from the xserver actually checks the
return from adddraw and keeps on trying to create a kernel drawable
every time somebody creates a dri drawable. But since that's now a noop,
who cares.

Therefore it's safe to replace these three ioctls with noops and rip
out the implementation.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:39:11 +10:00
Daniel Vetter
4ac5ec40ec drm: don't export dri1 locking functions
Only used by ioctl, not by any in-tree drivers.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:39:00 +10:00
Daniel Vetter
793a97e4cc drm: kill drm_map_ofs callbacks
All drivers happily copy&pasted the default implementation without
checking whether this callback is used at all. It's not. Sigh.

Kill it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:50 +10:00
Daniel Vetter
690bb51b54 drm: drop return value of drm_free_agp
No caller (rightly) cares about it, so drop it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:39 +10:00
Daniel Vetter
a2a273c943 drm: don't export drm_get_drawable_info
Not used by any in-tree user. So drop it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:37 +10:00
Daniel Vetter
b3da8f7d2d drm: kill context_ctor callback
It's not used by any driver. The destructor callback is unfortunately
used by the via driver in a rather convoluted piece of code used
to reimplement something resembling broken futexes. I didn't dare
to touch this code. But at least kill the needless NULL assignemt
in the sis driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:25 +10:00
Daniel Vetter
fd2e7931cd drm: kill gem_free_object_unlocked driver callback
Not used by any current driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:18 +10:00
Daniel Vetter
23ddc0243d drm: kill dma_ready callbacks
Not used by any driver. So drop it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:12 +10:00
Daniel Vetter
be72ae26b1 drm: kill procfs callbacks
Not used by any driver (rightly so!). Kill them.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:38:08 +10:00
Daniel Vetter
1da3f87ebb drm: kill kernel_context_switch callbacks
Not used by any in-kernel driver. So drop it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:37:56 +10:00
Linus Torvalds
ee005577aa Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits)
  drm/radeon/kms: fix typo in radeon_compute_pll_gain
  drm/radeon/kms: try to detect tv vs monitor for underscan
  drm/radeon/kms: fix sideport detection on newer rs880 boards
  drm/radeon: fix passing wrong type to gem object create.
  drm/radeon/kms: set encoder type to DVI for HDMI on evergreen
  drm/radeon/kms: add back missing break in info ioctl
  drm/radeon/kms: don't enable MSIs on AGP boards
  drm/radeon/kms: fix agp mode setup on cards that use pcie bridges
  drm: move dereference below check
  drm: fix end of loop test
  drm/radeon/kms: rework radeon_dp_detect() logic
  drm/radeon/kms: add missing asic callback assignment for evergreen
  drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c
  drm/radeon/kms/pm: bail early if nothing's changing
  drm/radeon/kms/atom: clean up dig atom handling
  drm/radeon/kms: DCE3/4 transmitter fixes
  drm/radeon/kms: rework encoder handling
  drm/radeon/kms: DCE3/4 AdjustPixelPll updates
  drm/radeon: Fix stack data leak
  drm/radeon/kms: fix GTT/VRAM overlapping test
  ...
2010-08-23 18:28:03 -07:00
Dave Airlie
1b2f148963 drm: block userspace under allocating buffer and having drivers overwrite it (v2)
With the current screwed but its ABI, ioctls for the drm, Linus pointed out that we could allow userspace to specify the allocation size, but we pass it to the driver which then uses it blindly to store a struct. Now if userspace specifies the allocation size as smaller than the driver needs, the driver can possibly overwrite memory.

This patch restructures the driver ioctls so we store the structure size we are expecting, and make sure we allocate at least that size. The copy from/to userspace are still restricted to the size the user specifies, this allows ioctl structs to grow on both sides of the equation.

Up until now we didn't really use the DRM_IOCTL defines in the kernel, so this cleans them up and adds them for nouveau.

v2:
fix nouveau pushbuf arg (thanks to Ben for pointing it out)

Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-17 14:52:25 +10:00
Sam Ravnborg
60641aa1f3 include: replace unifdef-y with header-y
unifdef-y and header-y has same semantic.
So there is no need to have both.

Drop the unifdef-y variant and sort all lines again

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:51 +02:00
Linus Torvalds
aa9f56b66d Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits)
  io-mapping: move asm include inside the config option
  vgaarb: drop vga.h include
  drm/radeon: Add probing of clocks from device-tree
  drm/radeon: drop old and broken mesa warning
  drm/radeon: Fix pci_map_page() error checking
  drm: Remove count_lock for calling lastclose() after 58474713 (v2)
  drm/radeon/kms: allow FG_ALPHA_VALUE on r5xx
  drm/radeon/kms: another r6xx/r7xx CS checker fix
  DRM: Replace kmalloc/memset combos with kzalloc
  drm: expand gamma_set
  drm/edid: Split mode lists out to their own header for readability
  drm/edid: Rewrite mode parse to use the generic detailed block walk
  drm/edid: Add detailed block walk for VTB extensions
  drm/edid: Add detailed block walk for CEA extensions
  drm: Remove unused fields from drm_display_info
  drm: Use ENOENT consistently for the error return for an unmatched handle.
  drm/radeon/kms: mark 3D power states as performance
  drm: Only set DPMS once on the CRTC not after every encoder.
  drm/radeon/kms: add additional quirk for Acer rv620 laptop
  drm: Propagate error code from fb_create()
  ...

Fix up trivial conflicts in drivers/gpu/drm/drm_edid.c
2010-08-12 09:21:39 -07:00
James Simmons
7203425a94 drm: expand gamma_set
Expand the crtc_gamma_set function to accept a starting offset. The
reason for this is to eventually use this function for setcolreg from
drm_fb_helper.c. The fbdev colormap function can start at any offset in
the color map.

Signed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10 10:47:00 +10:00
Adam Jackson
4d76a22134 drm/edid: Add detailed block walk for CEA extensions
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10 10:46:57 +10:00
Adam Jackson
fb43964014 drm: Remove unused fields from drm_display_info
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10 10:46:56 +10:00
Benjamin Herrenschmidt
c17c2f892e drm: Fix support for PCI domains
(For some reason I thought that went in ages ago ...)

This fixes support for PCI domains in what should hopefully be a backward
compatible way along with a change to libdrm.

When the interface version is set to 1.4, we assume userspace understands
domains and the world is at peace. We thus pass proper domain numbers
instead of 0 to userspace.

The newer libdrm will then try 1.4 first, and fallback to 1.1, along with
ignoring domains in the later case (well, except on alpha of course)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10 08:20:20 +10:00
Linus Torvalds
3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Linus Torvalds
fc1caf6eaf Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits)
  agp: intel-agp: do not use PCI resources before pci_enable_device()
  agp: efficeon-agp: do not use PCI resources before pci_enable_device()
  drm: kill BKL from common code
  drm/kms: Simplify setup of the initial I2C encoder config.
  drm,io-mapping: Specify slot to use for atomic mappings
  drm/radeon/kms: only expose underscan on avivo chips
  drm/radeon: add new pci ids
  drm: Cleanup after failing to create master->unique and dev->name
  drm/radeon: tone down overchatty acpi debug messages.
  drm/radeon/kms: enable underscan option for digital connectors
  drm/radeon/kms: fix calculation of h/v scaling factors
  drm/radeon/kms/igp: sideport is AMD only
  drm/radeon/kms: handle the case of no active displays properly in the bandwidth code
  drm: move ttm global code to core drm
  drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it.
  drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors
  drm/radeon/kms: make sure rio_mem is valid before unmapping it
  drm/agp/i915: trim stolen space to 32M
  drm/i915: Unset cursor if out-of-bounds upon mode change (v4)
  drm/i915: Unreference object not handle on creation
  ...
2010-08-05 16:02:01 -07:00
Linus Torvalds
9779714c8a Merge branch 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,docs: Update the kgdb docs to include kms
  drm_fb_helper: Preserve capability to use atomic kms
  i915: when kgdb is active display compression should be off
  drm/i915: use new fb debug hooks
  drm: add KGDB/KDB support
  fb: add hooks to handle KDB enter/exit
  kgdboc: Add call backs to allow kernel mode switching
  vt,console,kdb: automatically set kdb LINES variable
  vt,console,kdb: implement atomic console enter/leave functions
2010-08-05 16:00:44 -07:00
Jesse Barnes
1a7aba7f4e drm: add KGDB/KDB support
Implement the callbacks for KDB entry/exit via the drm helpers.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 09:22:31 -05:00
Arnd Bergmann
58374713c9 drm: kill BKL from common code
This restricts the use of the big kernel lock to the i830 and i810
device drivers. The three remaining users in common code (open, ioctl
and release) get converted to a new mutex, the drm_global_mutex,
making the locking stricter than the big kernel lock.

This may have a performance impact, but only in those cases that
currently don't use DRM_UNLOCKED flag in the ioctl list and would
benefit from that anyway.

The reason why i810 and i830 cannot use drm_global_mutex in their
mmap functions is a lock-order inversion problem between the current
use of the BKL and mmap_sem in these drivers. Since the BKL has
release-on-sleep semantics, it's harmless but it would cause trouble
if we replace the BKL with a mutex.

Instead, these drivers get their own ioctl wrappers that take the
BKL around every ioctl call and then set their own handlers as
DRM_UNLOCKED.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-05 11:54:40 +10:00
Alex Deucher
1297c05a8d drm/radeon: add new pci ids
New evergreen and r7xx ids.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-05 08:47:00 +10:00
Dave Airlie
ba4420c224 drm: move ttm global code to core drm
I wrote this for the prime sharing work, but I also noticed other external
non-upstream drivers from a large company carrying a similiar patch, so I
may as well ship it in master.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04 09:46:06 +10:00
Jesse Barnes
aa7ffc01d2 x86 platform driver: intelligent power sharing driver
Intel Core i3/5 platforms with integrated graphics support both CPU and
GPU turbo mode.  CPU turbo mode is opportunistic: the CPU will use any
available power to increase core frequencies if thermal headroom is
available.  The GPU side is more manual however; the graphics driver
must monitor GPU power and temperature and coordinate with a core
thermal driver to take advantage of available thermal and power headroom
in the package.

The intelligent power sharing (IPS) driver is intended to coordinate
this activity by monitoring MCP (multi-chip package) temperature and
power, allowing the CPU and/or GPU to increase their power consumption,
and thus performance, when possible.  The goal is to maximize
performance within a given platform's TDP (thermal design point).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03 09:48:45 -04:00
Dave Airlie
ab9e1f5966 drm/radeon: add basic zmask/hiz support (v4)
This interface allows userspace to request hyperz support, it probably
needs more locking, and really reporting that you can have hyperz is racy
since someone else might get it before you do.

v2: modify so we pass 0 valued packets to let DDX/r300c keep working.
also fixed incorrect 0x4f1c reference.

v3: fixup zb_bw_cntl so older drivers keep working

v4: add locking, fixup SC_HYPERZ_EN - patch stream to disable hiz

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 11:54:26 +10:00
Dave Airlie
7827627107 Merge branch 'drm-radeon-next' of ../drm-radeon-next into drm-core-next
* 'drm-radeon-next' of ../drm-radeon-next: (333 commits)
  drm/radeon/kms: trivial code style fixes for audio
  drm/radeon: remove viewport transform from r6xx/r7xx blit emit
  drm/radeon: group r6xx/r7xx newly sequential blit state
  drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequential
  drm/radeon: r6xx/r7xx move vport clipping to a single packet
  drm/radeon: group r6xx/r7xx sequential blit state
  drm/radeon: remove duplicate state emit in r6xx/r7xx blit
  drm/radeon: add comments to r6xx/r7xx blit state
  drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
  drm/radeon/kms: remove rs4xx gart limit
  drm: radeon: fix sign bug
  drm/radeon/kms: check/restore sanity before doing anything else with GPU.
  drm/radeon: fall back to GTT if bo creation/validation in VRAM fails.
  drm/radeon/kms: add ioport register access
  drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740
  drm/radeon/kms: track audio engine state, do not use not setup timer
  drm/radeon/kms/r6xx+: add query for tile config (v2)
  drm/radeon/kms: fix CS alignment checking for tiling (v2)
  drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx
  drm/radeon/kms: Add crtc tiling setup support for evergreen
  ...
2010-08-02 10:24:46 +10:00
Francisco Jerez
e190bfe568 drm: Import driver for the sil164 I2C TMDS transmitter.
sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups.

So far only nouveau can use this driver.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Tested-by: Patrice Mandin <patmandin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:21:13 +10:00
Alex Deucher
e7aeeba6a8 drm/radeon/kms/r6xx+: add query for tile config (v2)
Userspace needs this information to access tiled
buffers via the CPU.

v2: rebased on evergreen accel changes

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:05 +10:00
Tejun Heo
991ea75cb1 drm: use workqueue instead of slow-work
Workqueue can now handle high concurrency.  Convert drm_crtc_helper to
use system_nrt_wq instead of slow-work.  The conversion is mostly
straight forward.  One difference is that drm_helper_hpd_irq_event()
no longer blocks and can be called from any context.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
2010-07-22 23:18:20 +02:00
Ben Skeggs
92897b5c66 drm: add "auto" dithering method
There's no convenient/reliable way for drivers to both obey the dithering
mode property, and to be able to attempt to provide a good default in all
cases.

This commit adds an "auto" method to the property which drivers can default
to if they wish, whilst still allowing the user to override the choice as
they do now.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-21 11:19:45 +10:00
Dave Airlie
102e73463e Merge branch 'drm-tracepoints' into drm-testing 2010-07-07 18:38:44 +10:00
Alex Deucher
5c8d7171cc drm/kms: add crtc disable function
More explicit than dpms. Same as the encoder disable function.

Need this to explicity disconnect plls from crtcs for reuse when you
plls:crtcs ratio isn't 1:1.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07 18:38:32 +10:00
Dave Airlie
a907a2e7d2 Merge branch 'drm-intel-lru' into drm-testing
* drm-intel-lru:
  drm: implement helper functions for scanning lru list
  drm_mm: extract check_free_mm_node
  drm: sane naming for drm_mm.c
  drm: kill dead code in drm_mm.c
  drm: kill drm_mm_node->private
  drm: use list_for_each_entry in drm_mm.c
2010-07-07 18:37:37 +10:00
Dave Airlie
db8cc27b80 Merge branch 'drm-platform' into drm-testing
* drm-platform:
  drm: Make sure the DRM offset matches the CPU
  drm: Add __arm defines to DRM
  drm: Add support for platform devices to register as DRM devices
  drm: Remove drm_resource wrappers
2010-07-07 18:37:35 +10:00
Daniel Vetter
709ea97145 drm: implement helper functions for scanning lru list
These helper functions can be used to efficiently scan lru list
for eviction. Eviction becomes a three stage process:
1. Scanning through the lru list until a suitable hole has been found.
2. Scan backwards to restore drm_mm consistency and find out which
   objects fall into the hole.
3. Evict the objects that fall into the hole.

These helper functions don't allocate any memory (at the price of
not allowing any other concurrent operations). Hence this can also be
used for ttm (which does lru scanning under a spinlock).

Evicting objects in this fashion should be more fair than the current
approach by i915 (scan the lru for a object large enough to contain
the new object). It's also more efficient than the current approach used
by ttm (uncoditionally evict objects from the lru until there's enough
free space).

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07 12:29:51 +10:00
Daniel Vetter
d1024ce91f drm: sane naming for drm_mm.c
Yeah, I've kinda noticed that fl_entry is the free stack. Still
give it (and the memory node list ml_entry) decent names.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Hellstrom <thellstrom@vmwgfx.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07 12:27:53 +10:00
Daniel Vetter
db3307a9f7 drm: kill drm_mm_node->private
Only ever assigned, never used.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[glisse: I will re-add if needed for range-restricted allocations]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07 12:26:44 +10:00
Francisco Jerez
5870a4d97d drm/ttm: Allocate the page pool manager in the heap.
Repeated ttm_page_alloc_init/fini fails noisily because the pool
manager kobj isn't zeroed out between uses (we could do just that but
statically allocated kobjects are generally considered a bad thing).
Move it to kzalloc'ed memory.

Note that this patch drops the refcounting behavior of the pool
allocator init/fini functions: it would have led to a race condition
in its current form, and anyway it was never exploited.

This fixes a regression with reloading kms modules at runtime, since
page allocator was introduced.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07 12:14:11 +10:00
Jesse Barnes
b9c2c9ae88 drm: add per-event vblank event trace points
Allows us to track each process that requests and completes events.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-02 14:03:24 +10:00
Alex Deucher
148a03bc0b drm/radeon/kms/evergreen: set accel_enabled
This is needed to enable accel in the ddx.  However,
due to a bug in older versions of the ddx, it relies
on accel being disabled in order to load properly on
evergreen chips.  To maintain compatility, we add a new
get accel param and call that from the ddx.  The old one
always returns false for evergreen cards.

[this fixes a regression with older userspaces on newer kernels].

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:34:42 +10:00
Linus Torvalds
1067b6c2be Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
  drm/radeon/kms: make sure display hw is disabled when suspending
  drm/vmwgfx: Allow userspace to change default layout. Bump minor.
  drm/vmwgfx: Fix framebuffer modesetting
  drm/vmwgfx: Fix vga save / restore with display topology.
  vgaarb: use MIT license
  vgaarb: convert pr_devel() to pr_debug()
  drm: fix typos in Linux DRM Developer's Guide
  drm/radeon/kms/pm: voltage fixes
  drm/radeon/kms/pm: radeon_set_power_state fixes
  drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
  drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
  drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
  drm/radeon/kms/evergreen: add initial CS parser
  drm/kms: disable/enable poll around switcheroo on/off
  drm/nouveau: fixup confusion over which handle the DSM is hanging off.
  drm/nouveau: attempt to get bios from ACPI v3
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/ttm: Fix ttm_page_alloc.c
  drm/ttm: Fix cached TTM page allocation.
  drm/vmwgfx: Remove some leftover debug messages.
  ...
2010-06-03 07:19:45 -07:00
Jakob Bornecrantz
d8bd19d2af drm/vmwgfx: Allow userspace to change default layout. Bump minor.
The host may change the layout and, since the change is
communicated to the master, the master needs a way to
communicate the change to the kernel driver.

The minor version number is bumped to advertize the
availability of this feature.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:36 +10:00
Zou Nan hai
e3a815fcd3 drm/i915: add HAS_BSD check to i915_getparam
This will let userland only try to use the new media decode
functionality when the appropriate kernel is present.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-01 11:21:09 -07:00
Dave Airlie
36d1701c50 Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-testing
* 'nouveau/for-airlied' of ../drm-nouveau-next:
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/nv50: use alternate source of SOR_MODE_CTRL for DP hack
  drm/nouveau: fix dual-link displays when plugged into single-link outputs
  drm/nv50: obey dcb->duallink_possible
  drm/nv50: fix duallink_possible calculation for DCB 4.0 cards
  drm/nouveau: don't execute INIT_GPIO unless we're really running the table
  drm/nv40: allow cold-booting of nv4x chipsets
  drm/nouveau: fix POST detection for certain chipsets
  drm/nouveau: Add getparam for current PTIMER time.
  drm/nouveau: allow cursor image and position to survive suspend
2010-06-01 11:32:29 +10:00
Dave Airlie
fbf81762e3 drm/kms: disable/enable poll around switcheroo on/off
Because we aren't in a suspend state the poll will still run when we have switcherooed a card off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:36:02 +10:00
Jordan Crouse
dcdb167402 drm: Add support for platform devices to register as DRM devices
Allow platform devices without PCI resources to be DRM devices.

[airlied: fixup warnings with dev pointers]

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:07:39 +10:00
Jordan Crouse
01d73a6967 drm: Remove drm_resource wrappers
Remove the drm_resource wrappers and directly use the
actual PCI and/or platform functions in their place.

[airlied: fixup nouveau properly to build]

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:07:24 +10:00
Marcin Kościelnicki
7fc74f17e6 drm/nouveau: Add getparam for current PTIMER time.
This will be useful for computing GPU-CPU latency, including
GL_ARB_timer_query extension.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:21 +10:00
Zou Nan hai
8187a2b70e drm/i915: introduce intel_ring_buffer structure (V2)
Introduces a more complete intel_ring_buffer structure with callbacks
for setup and management of a particular ringbuffer, and converts the
render ring buffer consumers to use it.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
[anholt: Fixed up whitespace fail and rebased against prep patches]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:24:49 -07:00
Linus Torvalds
59534f7298 Merge branch 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (207 commits)
  drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile
  drm/radeon: fix power supply kconfig interaction.
  drm/radeon/kms: record object that have been list reserved
  drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.
  drm/radeon/kms: don't default display priority to high on rs4xx
  drm/edid: fix typo in 1600x1200@75 mode
  drm/nouveau: fix i2c-related init table handlers
  drm/nouveau: support init table i2c device identifier 0x81
  drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
  drm/nouveau: display error message for any failed init table opcode
  drm/nouveau: fix init table handlers to return proper error codes
  drm/nv50: support fractional feedback divider on newer chips
  drm/nv50: fix monitor detection on certain chipsets
  drm/nv50: store full dcb i2c entry from vbios
  drm/nv50: fix suspend/resume with DP outputs
  drm/nv50: output calculated crtc pll when debugging on
  drm/nouveau: dump pll limits entries when debugging is on
  drm/nouveau: bios parser fixes for eDP boards
  drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
  drm/nv40: remove some completed ctxprog TODOs
  ...
2010-05-21 11:14:52 -07:00
Ben Skeggs
68adac5e49 drm: move radeon_fixed.h to shared drm_fixed.h header
Will be used by nouveau driver also in the near future.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:33 +10:00
Matthew Garrett
7c5ee5366f ttm: Provide an API for starting and stopping the delayed workqueue
We want to be able to prevent the delayed workqueue from changing state
while we're reclocking, so add an API to block and unblock it.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:20 +10:00
Dave Airlie
1d42bbc8f7 drm/fbdev: fix cloning on fbcon
Simple cloning rules compared to server:
(a) single crtc
(b) > 1 connector active
(c) check command line mode
(d) try and find 1024x768 DMT mode if no command line.
(e) fail to clone

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:22 +10:00
Dave Airlie
eb1f8e4f3b drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:11 +10:00
Jerome Glisse
bc35afdb18 drm/radeon/kms: add query for crtc hw id from crtc id to get info V2
Userspace need to know the hw crtc id (0, 1, 2, ...) from the drm
crtc id. Bump the minor version so userspace can enable conditionaly
features depend on this.

V2 use num_crtc and avoid DRM_ERROR

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:59:08 +10:00
Dan Carpenter
96525a2f74 drm_edid: There should be 6 Standard Timings
Smatch complained that we initialize 6 elements in add_detailed_modes()
but the timings[] array is declared with 5 elements.  Adam Jackson
verified that 6 is the correct number of timings.

On Mon, May 10, 2010 at 12:08:24PM -0400, Adam Jackson wrote:
> > >                 struct std_timing timings[5];
> > >                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> This decl is wrong, should be 6.  From the 1.4 spec:
>
> "Six additional Standard Timings may be listed as a display descriptor
> (tag #FAh)."
>
> The 1.3 spec is a little less explicit about it, but does show 6
> standard timing codes in the 0xFA detailed subblock, terminated by 0x0A
> in the 18th byte.  I don't have the docs for 1.2 or earlier, but we're
> paranoid enough about not adding broken timings that we should be fine.

This patch is basically a clean up, because timings[] is declared inside
a union and increasing the number of elements here doesn't change the
overall size of the union.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:56:14 +10:00
Linus Torvalds
e33b3e7567 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ttm: Remove the ttm_bo_block_reservation() function.
  drm/ttm: Remove some leftover debug messages.
  drm/radeon: async event synchronization for drmWaitVblank
2010-05-07 14:02:01 -07:00
Thomas Hellstrom
8cfe92d683 drm/ttm: Remove the ttm_bo_block_reservation() function.
It's unused and buggy in its current form, since it can place a bo
in the reserved state without removing it from lru lists.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07 09:21:28 +10:00
Dave Airlie
7547a917fa Merge branch 'drm-ttm-unmappable' into drm-core-next
* drm-ttm-unmappable:
  drm/radeon/kms: enable use of unmappable VRAM V2
  drm/ttm: remove io_ field from TTM V6
  drm/vmwgfx: add support for new TTM fault callback V5
  drm/nouveau/kms: add support for new TTM fault callback V5
  drm/radeon/kms: add support for new fault callback V7
  drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
  drm/ttm: split no_wait argument in 2 GPU or reserve wait

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bo.c
2010-04-20 14:15:09 +10:00
Jerome Glisse
0c321c7962 drm/ttm: remove io_ field from TTM V6
All TTM driver have been converted to new io_mem_reserve/free
interface which allow driver to choose and return proper io
base, offset to core TTM for ioremapping if necessary. This
patch remove what is now deadcode.

V2 adapt to match with change in first patch of the patchset
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 adjust to minor cleanup
V5 remove the needs ioremap flag
V6 keep the ioremapping facility in TTM

[airlied- squashed driver removals in here also]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:13:09 +10:00
Jerome Glisse
82c5da6bf8 drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
On fault the driver is given the opportunity to perform any operation
it sees fit in order to place the buffer into a CPU visible area of
memory. This patch doesn't break TTM users, nouveau, vmwgfx and radeon
should keep working properly. Future patch will take advantage of this
infrastructure and remove the old path from TTM once driver are
converted.

V2 return VM_FAULT_NOPAGE if callback return -EBUSY or -ERESTARTSYS
V3 balance io_mem_reserve and io_mem_free call, fault_reserve_notify
   is responsible to perform any necessary task for mapping to succeed
V4 minor cleanup, atomic_t -> bool as member is protected by reserve
   mecanism from concurent access
V5 the callback is now responsible for iomapping the bo and providing
   a virtual address this simplify TTM and will allow to get rid of
   TTM_MEMTYPE_FLAG_NEEDS_IOREMAP
V6 use the bus addr data to decide to ioremap or this isn't needed
   but we don't necesarily need to ioremap in the callback but still
   allow driver to use static mapping

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:05 +10:00
Daniel Vetter
fd632aa34c drm: free core gem object from driver callbacks
When drivers embed the core gem object into their own structures,
they'll have to do this. Temporarily this results in an ugly

kfree(gem_obj);

in every gem driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:33 +10:00
Daniel Vetter
1d397043bc drm: extract drm_gem_object_init
This function can be used by drivers who allocate the drm gem object
on their own. No functional change in here, just preparation.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:25 +10:00
Dave Airlie
7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
Dave Airlie
c9c2625ff4 Merge branch 'drm-edid-fixes' into drm-core-next
* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.
2010-04-20 13:14:38 +10:00
Dave Airlie
c2b41276da Merge branch 'drm-ttm-pool' into drm-core-next
* drm-ttm-pool:
  drm/ttm: using kmalloc/kfree requires including slab.h
  drm/ttm: include linux/seq_file.h for seq_printf
  drm/ttm: Add sysfs interface to control pool allocator.
  drm/ttm: Use set_pages_array_wc instead of set_memory_wc.
  arch/x86: Add array variants for setting memory to wc caching.
  drm/nouveau: Add ttm page pool debugfs file.
  drm/radeon/kms: Add ttm page pool debugfs file.
  drm/ttm: Add debugfs output entry to pool allocator.
  drm/ttm: add pool wc/uc page allocator V3
2010-04-20 13:12:28 +10:00
Linus Torvalds
73c6c7fbb7 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add FireMV 2400 PCI ID.
  drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET
  drivers/gpu/radeon: Add MSPOS regs to safe list.
  drm/radeon/kms: disable the tv encoder when tv/cv is not in use
  drm/radeon/kms: adjust pll settings for tv
  drm/radeon/kms: fix tv dac conflict resolver
  drm/radeon/kms/evergreen: don't enable hdmi audio stuff
  drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0
  drm/radeon/kms: fix rs600 tlb flush
  drm/radeon/kms: print GPU family and device id when loading
  drm/radeon/kms: fix calculation of mipmapped 3D texture sizes
  drm/radeon/kms: only change mode when coherent value changes.
  drm/radeon/kms: more atom parser fixes (v2)
2010-04-19 07:27:06 -07:00
Dave Airlie
79b9517a33 drm/radeon/kms: add FireMV 2400 PCI ID.
This is an M24/X600 chip.

From RH# 581927

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19 18:53:10 +10:00
Jerome Glisse
9d87fa2138 drm/ttm: split no_wait argument in 2 GPU or reserve wait
There is case where we want to be able to wait only for the
GPU while not waiting for other buffer to be unreserved. This
patch split the no_wait argument all the way down in the whole
ttm path so that upper level can decide on what to wait on or
not.

[airlied: squashed these 4 for bisectability reasons.]
drm/radeon/kms: update to TTM no_wait splitted argument
drm/nouveau: update to TTM no_wait splitted argument
drm/vmwgfx: update to TTM no_wait splitted argument
[vmwgfx patch: Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-08 10:21:19 +10:00
Dave Airlie
4abe35204a drm/kms/fb: use slow work mechanism for normal hotplug also.
a) slow work is always used now for any fbcon hotplug, as its not
   a fast task and is more suited to being ran under slow work.

b) attempt to not do any fbdev changes when X is running as we'll
   just mess it up. This hooks set_par to hopefully do the changes
   once X hands control to fbdev.

This also adds the nouveau/intel hotplug support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:30:38 +10:00
Dave Airlie
5c4426a782 drm/kms/fb: add polling support for when nothing is connected.
When we are running in a headless environment we have no idea what
output the user might plug in later, we only have hotplug detect
from the digital outputs. So if we detect no connected outputs at
initialisation, start a slow work operation to poll every 5 seconds
for an output.

this is only hooked up for radeon so far, on hw where we have full
hotplug detection there is no need for this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:29:52 +10:00
Dave Airlie
0b4c0f3f0e drm/kms/fb: separate fbdev connector list from core drm connectors
This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:28:01 +10:00
Dave Airlie
8be48d924c drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
This move to using the list of crtcs in the fb helper and cleans up the
whole picking code, now we store the crtc/connectors we want directly
into the modeset and we use the modeset directly to set the mode.

Fixes from James Simmons and Ben Skeggs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:24:56 +10:00
Dave Airlie
386516744b drm/fb: fix fbdev object model + cleanup properly.
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:21:03 +10:00
Pauli Nieminen
c96af79e34 drm/ttm: Add sysfs interface to control pool allocator.
Sysfs interface allows user to configure pool allocator functionality and
change limits for the size of pool.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:36:18 +10:00
Pauli Nieminen
0745866165 drm/ttm: Add debugfs output entry to pool allocator.
ttm_page_alloc_debugfs can be registered to output the state
of pools.

Debugfs file will output number of pages freed from the pool,
number of pages in pool now and the lowes number of pages in
pool since previous shrink.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:35:45 +10:00
Pauli Nieminen
1403b1a38e drm/ttm: add pool wc/uc page allocator V3
On AGP system we might allocate/free routinely uncached or wc memory,
changing page from cached (wb) to uc or wc is very expensive and involves
a lot of flushing. To improve performance this allocator use a pool
of uc,wc pages.

Pools are protected with spinlocks to allow multiple threads to allocate pages
simultanously. Expensive operations are done outside of spinlock to maximize
concurrency.

Pools are linked lists of pages that were recently freed. mm shrink callback
allows kernel to claim back pages when they are required for something else.

Fixes:
* set_pages_array_wb handles highmem pages so we don't have to remove them
  from pool.
* Add count parameter to ttm_put_pages to avoid looping in free code.
* Change looping from _safe to normal in pool fill error path.
* Initialize sum variable and make the loop prettier in get_num_unused_pages.

* Moved pages_freed reseting inside the loop in ttm_page_pool_free.
* Add warning comment about spinlock context in ttm_page_pool_free.

Based on Jerome Glisse's and Dave Airlie's pool allocator.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:35:26 +10:00
Adam Jackson
7a37435008 drm/edid: Add secondary GTF curve support
Before CVT-R, some monitors would advertise support for an alternative
GTF formula with lower blanking intervals.  Correctly identify such
monitors, and use the alternative formula when generating modes for
them.

Note that we only do this for "standard" timing descriptors (tuples of
hsize in characters / aspect ratio / vertical refresh).  Range-based
mode lists still only refer to the primary GTF curve.  It would be
possible to do better for the latter case, but monitors are required to
support the primary curve over the entire advertised range, so all it
would win you is a lower pixel clock and therefore possibly better image
quality on analog links.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:25 +10:00
Adam Jackson
7466f4cc50 drm/edid: Remove arbitrary EDID extension limit
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:20 +10:00
Adam Jackson
61e57a8d72 drm/edid: Fix secondary block fetch.
This makes fetching the second EDID block on HDMI monitors actually
work.  DDC can't transfer more than 128 bytes at a time.  Also,
rearrange the code so the pure DDC bits are separate from block parse.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:16 +10:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dave Airlie
1fc59eda33 Merge branch 'radeon-for-airlied' of ../linux-2.6 into drm-linus
* 'radeon-for-airlied' of ../linux-2.6:
  drm/radeon/kms: prepare for more reclocking operations
  drm/radeon/kms: switch to condition waiting for reclocking
  drm/radeon/r600: add missing license and comments to r600_blit_shaders.c
  drm/radeon/kms: improve coding style a little
  drm/radeon/kms: remove dead audio/HDMI code
  drm/radeon/kms: enable audio engine on DCE32
  drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUs
  drm/radeon/kms: clean assigning HDMI blocks to encoders
  drm/radeon/kms: clean HDMI definitions
  drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timing
  drm/radeon/kms/r1xx: enable hw i2c
  drm/radeon/kms: fix i2c prescale calc on older radeons
  drm/radeon/kms: fix for hw i2c
  drm/radeon/kms: fix pal tv-out support on legacy IGP chips
  drm/radeon/kms: further spread spectrum fixes
  drm/radeon/kms: use lcd pll limits when available
  drm/radeon/kms/atom: spread spectrum fix
  drm/radeon/kms: catch atombios infinite loop and break out of it
  drm/radeon: add new RS880 pci id
2010-03-15 11:08:59 +10:00
Dave Airlie
72e942dd84 drm/ttm: use drm calloc large and free large
Now that the drm core can do this, lets just use it, split the code out
so TTM doesn't have to drag all of drmP.h in.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 10:31:43 +10:00
Alex Deucher
338e2b1d57 drm/radeon: add new RS880 pci id
This should go to 2.6.33 stable as well.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 09:22:12 +10:00
Dave Airlie
68de774582 Merge branch 'drm-radeon-testing' of /ssd/git/drm-radeon-next into drm-next-stage
* 'drm-radeon-testing' of /ssd/git/drm-radeon-next:
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
2010-03-01 16:08:57 +10:00
Randy Dunlap
a55e8d452e drm/ttm: fix function prototype to match implementation
Fix function prototype to match its actual usage and implementation.

drivers/gpu/drm/ttm/ttm_bo_util.c:341:10: error: symbol 'ttm_io_prot' redeclared with different type (originally declared at include/drm/ttm/ttm_bo_driver.h:911) - incompatible argument 1 (different signedness)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:03:26 +10:00
Dave Airlie
cf7934a2a0 Merge remote branch 'anholt/drm-intel-next' into drm-next-stage
* anholt/drm-intel-next: (103 commits)
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  drm/i915: extract fence stealing code
  drm/i915: fixup active list locking in object_unbind
  drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
  drm/i915: Add dependency on the intel agp module
  drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
  drm/i915: Correct the Sandybridge chipset info structs.
  drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
  drm/i915: Add a new mobile Sandybridge PCI ID.
  agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
  drm/i915, agp/intel: Fix stolen memory size on Sandybridge
  drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
  drm/i915: Disable the surface tile swizzling on Sandybridge.
  agp/intel: Use a non-reserved value for the cache field of the PTEs.
  drm/i915: Fix sandybridge status page setup.
  ...
2010-03-01 15:41:26 +10:00
Dave Airlie
aa71fa3cd5 Merge remote branch 'nouveau/for-airlied' into drm-next-stage
* nouveau/for-airlied: (25 commits)
  drm/nouveau: use ALIGN instead of open coding it
  drm/nouveau: report unknown connector state if lid closed
  drm/nouveau: support version 0x20 displayport tables
  drm/nouveau: Fix noaccel/nofbaccel option descriptions.
  drm/nv50: Implement ctxprog/state generation.
  drm/nouveau: use dcb connector types throughout the driver
  drm/nv50: enable hpd on any connector we know the gpio line for
  drm/nouveau: use dcb connector table for creating drm connectors
  drm/nouveau: construct a connector table for cards that lack a real one
  drm/nouveau: check for known dcb connector types
  drm/nouveau: parse dcb gpio/connector tables after encoders
  drm/nouveau: reorganise bios header, add dcb connector type enums
  drm/nouveau: merge nvbios and nouveau_bios_info
  drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
  drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
  drm/nouveau: allow retrieval of vbios image from debugfs
  drm/nouveau: fix missing spin_unlock in failure path
  drm/nouveau: fix i2ctable bounds checking
  drm/nouveau: fix nouveau_i2c_find bounds checking
  drm/nouveau: fix pramdac_table range checking
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_gem.c
2010-03-01 15:41:15 +10:00
Eric Anholt
bad720ff3e drm/i915: Add initial bits for VGA modesetting bringup on Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:17 -08:00
Dave Airlie
eb6b6d7cdd Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
  drm/radeon/kms: update new pll algo
  drm/radeon/kms: add support for square microtiles on r3xx-r5xx
  drm/radeon/kms: force pinning buffer into visible VRAM
  drm/radeon/kms/evergreen: fix typo in cursor code
  drm/radeon/kms: implement reading active PCIE lanes on R600+
  drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
  drm/radeon/kms: simplify storing current and requested PM mode
  drm/radeon: fixes for r6xx/r7xx gfx init
  drm/radeon/rv740: fix backend setup
  drm/radeon/kms: fix R3XX/R4XX memory controller initialization
  [rfc] drm/radeon/kms: pm debugging check for vbl.
  drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
  drm: Add generic multipart buffer.
  drm/radeon/kms: simplify memory controller setup V2
  drm/radeon: Add asic hook for dma copy to r200 cards.
  drm/radeon/kms: Create asic structure for r300 pcie cards.
  drm/radeon/kms: remove unused r600_gart_clear_page
  drm/radeon/kms: remove HDP flushes from fence emit (v2)
  drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
  drm/radeon/kms: simplify picking power state
  ...

Conflicts:
	drivers/gpu/drm/radeon/atom.c
	drivers/gpu/drm/radeon/atombios.h
	drivers/gpu/drm/radeon/atombios_dp.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/r600_audio.c
	drivers/gpu/drm/radeon/r600_cp.c
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/radeon_ring.c
	drivers/gpu/drm/radeon/rv770.c
2010-02-26 16:23:23 +10:00
Ben Skeggs
a1606a9596 drm/nouveau: new gem pushbuf interface, bump to 0.0.16
This commit breaks the userspace interface, and requires a new libdrm for
nouveau to operate again.

The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for
compatibility purposes are now gone, and replaced with the new ioctl which
allows for multiple push buffers to be submitted (necessary for hw index
buffers in the nv50 3d driver) and relocations to be applied on any buffer.

A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed
for userspace modesetting have also been removed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-02-25 15:08:44 +10:00
Marek Olšák
939461d59d drm/radeon/kms: add support for square microtiles on r3xx-r5xx
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25 11:36:12 +10:00
Pauli Nieminen
7a9f0dd9c4 drm: Add generic multipart buffer.
Allocating multiple pages of memory for data that is coming
from user space may fail. To fix memory allocation failures
the buffer object should be split to multiple independ pages.

drm buffer provides generic interface to copy and process
large data arrays from user space.

Interface includes allocation and free functions to allocate
the buffer object and data storage pages.

All access operations are performed relative to a internal
pointer which is advanced with drm_buffer_advance function.

The buffer can be accessed using drm_buffer_pointer_to_XXX
functions if it is known that requested object doesn't split
over a page boundary. These functions don't do any error
checking to maximize performance.

If there is large object which could be split there is special
drm_buffer_read_object function. drm_buffer_read_object takes
a pointer as argument which is used as temporary store for
data if it is split over boundary in the buffer.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:46:20 +10:00
Luca Barbieri
c3ae90c099 drm: introduce drm_gem_object_[handle_]unreference_unlocked
This patch introduces the drm_gem_object_unreference_unlocked
and drm_gem_object_handle_unreference_unlocked functions that
do not require holding struct_mutex.

drm_gem_object_unreference_unlocked calls the new
->gem_free_object_unlocked entry point if available, and
otherwise just takes struct_mutex and just calls ->gem_free_object

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 14:21:24 +10:00
Dave Airlie
e8a47c10b2 Merge remote branch 'nouveau/for-airlied' of nouveau-2.6
* 'nouveau/for-airlied' of /home/airlied/kernel/drm-next:
  nouveau: fix state detection with switchable graphics
  drm/nouveau: move dereferences after null checks
  drm/nv50: make the pgraph irq handler loop like the pre-nv50 version
  drm/nv50: delete ramfc object after disabling fifo, not before
  drm/nv50: avoid unloading pgraph context when ctxprog is running
  drm/nv50: align size of buffer object to the right boundaries.
  drm/nv50: disregard dac outputs in nv50_sor_dpms()
  drm/nv50: prevent multiple init tables being parsed at the same time
  drm/nouveau: make dp auxch xfer len check for reads only
  drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50
  drm/nouveau: Add proper vgaarb support.
  drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard.
  drivers/gpu/drm/nouveau/nouveau_grctx.c: correct NULL test
  drm/nouveau: call ttm_bo_wait with the bo lock held to prevent hang
  drm/nouveau: Fixup semaphores on pre-nv50 cards.
  drm/nouveau: Add getparam to get available PGRAPH units.
  drm/nouveau: Add module options to disable acceleration.
  drm/nouveau: fix non-vram notifier blocks
2010-02-11 12:10:52 +10:00
Jakob Bornecrantz
a87897edba drm/vmwgfx: Drop scanout flag compat and add execbuf ioctl parameter members. Bumps major.
Even if this bumps the version to 1 it does not mean the driver is
out of staging. From what we know this is the last backwards
incompatible change to the driver.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 12:03:26 +10:00
Thomas Hellstrom
f77cef3db3 drm/vmwgfx: Update the user-space interface.
When time-based throttling is implemented, we need to bump minor.
When the old way of detecting scanout is removed, we need to bump major.
In the meantime, this change should not break existing user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 11:58:09 +10:00
Marcin Kościelnicki
69c9700b54 drm/nouveau: Add getparam to get available PGRAPH units.
On nv50, this will be needed by applications using CUDA to know
how much stack/local memory to allocate.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:48:08 +10:00
Alex Deucher
bcc1c2a1d2 drm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)
This adds initial Evergreen KMS support, it doesn't include
any acceleration features or interrupt handling yet.

Major changes are DCE4 handling for PLLs for the > 2 crtcs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:44:02 +10:00
Alex Deucher
3c537889e1 drm/radeon/kms: add support for hardcoded edids in rom (v2)
Some servers hardcode an edid in rom so that they will
work properly with KVMs.  This is a port of the relevant
code from the ddx.

[airlied: reworked to validate edid at boot stage - and
remove special quirk, if there is a valid EDID in the BIOS rom
we'll just try and use it.]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:31:20 +10:00
Linus Torvalds
9ce929078a Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
  drm/radeon/kms: move radeon KMS on/off switch out of staging.
  drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
  drm/vmwgfx: Don't send bad flags to the host
  drm/vmwgfx: Request SVGA version 2 and bail if not found
  drm/vmwgfx: Correctly detect 3D
  drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
  drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
  drm/ttm: remove padding from ttm_ref_object on 64bit builds
  drm/radeon/kms: release agp on error.
  drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
  drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
  drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
  drm/kms/radeon: pick digitial encoders smarter. (v3)
  drm/radeon/kms: use active device to pick connector for encoder
  drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
2010-02-01 10:46:49 -08:00
Marcin Kościelnicki
fa5829b365 drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:26:39 +10:00
Linus Torvalds
abefedd538 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (95 commits)
  drm/radeon/kms: preface warning printk with driver name
  drm/radeon/kms: drop unnecessary printks.
  drm: fix regression in fb blank handling
  drm/radeon/kms: make hibernate work on IGPs
  drm/vmwgfx: Optimize memory footprint for DMA buffers.
  drm/ttm: Allow system memory as a busy placement.
  drm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final)
  drm/nv50: prevent switching off SOR when in use for DVI-over-DP
  drm/nv50: fail auxch transaction if reply count not what we expect
  drm/nouveau: fix failure path if userspace specifies no valid memtypes
  drm/nouveau: report LVDS as disconnected if lid closed
  drm/radeon/kms: fix legacy get_engine/memory clock
  drm/radeon/kms/atom: atom parser fixes
  drm/radeon/kms: clean up atombios pll code
  drm/radeon/kms: clean up pll struct
  drm/radeon/kms/atom: fix crtc lock ordering
  drm/radeon: r6xx/r7xx possible security issue, system ram access
  drm/radeon/kms: r600/r700 don't test ib if ib initialization fails
  drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object
  drm/radeon/kms: r600 handle irq vector ring overflow
  ...
2010-01-25 18:59:47 -08:00
Thomas Hellstrom
3f09ea4ecd drm/ttm: Add a swap_notify callback.
This is needed for a bugfix in the vmwgfx driver.
Drivers may have GPU bindings on buffers that core TTM is not aware of,
and TTM may view those buffers as ordinary system memory buffers.
Add a notifier to such drivers when TTM is about to move the buffer
contents out to swappable memory. The driver must then release any
private GPU bindings on those buffers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14 12:18:54 +10:00
Linus Torvalds
c07d7237a6 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits)
  drm/nv04: Fix set_operation software method.
  drm/nouveau: initialise DMA tracking parameters earlier
  drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
  drm/nv04: differentiate between nv04/nv05
  drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
  drm/nv50: prevent a possible ctxprog hang
  drm/nouveau: have ttm's fault handler called directly
  drm/nv50: restore correct cache1 get/put address on fifoctx load
  drm/nouveau: create function for "dealing" with gpu lockup
  drm/nouveau: remove unused nouveau_channel_idle() function
  drm/nouveau: fix handling of fbcon colours in 8bpp
  drm/nv04: Context switching fixes.
  drm/nouveau: Use the software object for fencing.
  drm/nouveau: Allocate a per-channel instance of NV_SW.
  drm/nv50: make the blocksize depend on vram size
  drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
  drm/nouveau: Don't skip card take down on nv0x.
  drm/nouveau: Implement nv42-nv43 TV load detection.
  drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
  drm/nv50: fix fillrect color
  ...
2010-01-11 09:46:20 -08:00
Dave Airlie
0c9d2c418a Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
  drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xx
  drm/radeon/kms: Don't try to enable IRQ if we have no handler installed
  drm: Avoid calling vblank function is vblank wasn't initialized
  drm/radeon: mkregtable.c: close a file before exit
  drm/radeon/kms: Make sure we release AGP device if we acquired it
  drm/radeon/kms: Schedule host path read cache flush through the ring V2
  drm/radeon/kms: Workaround RV410/R420 CP errata (V3)
  drm/radeon/kms: detect sideport memory on IGP chips
  drm/radeon: fix a couple of array index errors
  drm/radeon/kms: add support for eDP (embedded DisplayPort)
  drm: Add eDP connector type
  drm/radeon/kms: pull in the latest upstream ObjectID.h changes
  drm/radeon/kms: whitespace changes to ObjectID.h
  drm/radeon/kms: fix typo in atom connector type handling
2010-01-11 14:42:58 +10:00
Dave Airlie
e8d6d61586 Merge remote branch 'korg/drm-radeon-testing' into drm-testing 2010-01-08 13:29:53 +10:00
Alex Deucher
7970e677ac drm: Add eDP connector type
Add a new connector type for eDP (embedded displayport)

eDP is more or less the same as DP but there are some
cases when you might want to handle it separately.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:04:04 +10:00
Linus Torvalds
2c1f1895ef Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table
2010-01-06 20:26:42 -08:00
Zhenyu Wang
e6be8d9d17 drm: remove address mask param for drm_pci_alloc()
drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:15:50 +10:00
Linus Torvalds
635b3c9d55 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits)
  drm/i915: remove full registers dump debug
  drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
  drm/i915: Select the correct BPC for LVDS on Ironlake
  drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake
  drm/i915: Enable/disable the dithering for LVDS based on VBT setting
  drm/i915: Permit pinning whilst the device is 'suspended'
  drm/i915: Hold struct mutex whilst pinning power context bo.
  drm/i915: fix unused var
  drm/i915: Storage class should be before const qualifier
  drm/i915: remove render reclock support
  drm/i915: Fix RC6 suspend/resume
  drm/i915: execbuf2 support
  drm/i915: Reload hangcheck timer too for Ironlake
  drm/i915: only enable hotplug for detected outputs
  drm/i915: Track whether cursor needs physical address in intel_device_info
  drm/i915: Implement IS_* macros using static tables
  drm/i915: Move PCI IDs into i915 driver
  drm/i915: Update LVDS connector status when receiving ACPI LID event
  drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
  drm/i915: implement new pm ops for i915
  ...
2010-01-06 18:16:17 -08:00
Jesse Barnes
76446cac68 drm/i915: execbuf2 support
This patch adds a new execbuf ioctl, execbuf2, for use by clients that
want to control fence register allocation more finely.  The buffer
passed in to the new ioctl includes a new relocation type to indicate
whether a given object needs a fence register assigned for the command
buffer in question.

Compatibility with the existing execbuf ioctl is implemented in terms
of the new code, preserving the assumption that fence registers are
required for pre-965 rendering commands.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: Remove pre-emptive clear_fence_reg()]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
[anholt: Removed dmesg spam]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06 09:39:39 -08:00
Arnd Bergmann
ed8b670409 drm: convert drm_ioctl to unlocked_ioctl
drm_ioctl is called with the Big Kernel Lock held,
which shows up very high in statistics on vfs_ioctl.

Moving the lock into the drm_ioctl function itself
makes sure we blame the right subsystem and it gets
us one step closer to eliminating the locked version
of fops->ioctl.

Since drm_ioctl does not require the lock itself,
we only need to hold it while calling the specific
handler. The 32 bit conversion handlers do not
interact with any other code, so they don't need
the BKL here either and can just call drm_ioctl.

As a bonus, this cleans up all the other users
of drm_ioctl which now no longer have to find
the inode or call lock_kernel.

[airlied: squashed the non-driver bits
of the second patch in here, this provides
the flag for drivers to use to select unlocked
ioctls - but doesn't modify any drivers].

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.sourceforge.net
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-18 11:22:31 +10:00
Dave Airlie
cbc8cc049a Merge remote branch 'korg/drm-vmware-staging' into drm-core-next 2009-12-18 09:53:50 +10:00
Jakob Bornecrantz
fb1d9738ca drm/vmwgfx: Add DRM driver for VMware Virtual GPU
This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA.
The driver is under staging the same as Nouveau and Radeon KMS. Hopefully
the 2D ioctls are bug free and don't need changing, so that part of the
API should be stable. But there there is a pretty big chance that the 3D API
will change in the future.

Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:43 +10:00
Jakob Bornecrantz
be1cb8689c drm/ttm: Add more driver type enums
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:18 +10:00
Ben Skeggs
6ee738610f drm/nouveau: Add DRM driver for NVIDIA GPUs
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.

This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.

This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.

This driver is reverse engineered, and is in no way supported by nVidia.

Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.

This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.

The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 21:29:34 +10:00
Jerome Glisse
09855acb1c drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
Convert ttm_buffer_object_init to use struct ttm_placement and
rename to ttm_bo_init for consistency with function naming. This
allow to give more complex placement at buffer creation. For
instance you ask to allocate bo into vram first but if there is
not enough vram you can give system as a second possible
placement. It also allow to create buffer in a specific range.

Also rename ttm_buffer_object_validate to ttm_bo_validate.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 14:09:05 +10:00
Jerome Glisse
99d7e48e8c drm: Add memory manager debug function
drm_mm_debug_table will print the memory manager state
in table allowing to give a snapshot of the manager at
given point in time. Usefull for debugging.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:28:06 +10:00
Thomas Hellstrom
98ffc4158e drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal.
The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer
before returned to user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:03 +10:00
Jerome Glisse
ca262a9998 drm/ttm: Rework validation & memory space allocation (V3)
This change allow driver to pass sorted memory placement,
from most prefered placement to least prefered placement.
In order to avoid long function prototype a structure is
used to gather memory placement informations such as range
restriction (if you need a buffer to be in given range).
Range restriction is determined by fpfn & lpfn which are
the first page and last page number btw which allocation
can happen. If those fields are set to 0 ttm will assume
buffer can be put anywhere in the address space (thus it
avoids putting a burden on the driver to always properly
set those fields).

This patch also factor few functions like evicting first
entry of lru list or getting a memory space. This avoid
code duplication.

V2: Change API to use placement flags and array instead
    of packing placement order into a quadword.
V3: Make sure we set the appropriate mem.placement flag
    when validating or allocation memory space.

[Pending Thomas Hellstrom further review but okay
from preliminary review so far].

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:02 +10:00
Jerome Glisse
a2e68e92d3 drm: Add search/get functions to get a block in a specific range
These are required for changes to TTM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:01 +10:00
Dave Airlie
7b0a9e8302 Merge remote branch 'korg/drm-radeon-dp' into drm-linus
This merges the radeon KMS DisplayPort and hotplug detect support.

Tested on RV635 DP card with a Dell 2408 monitor.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 14:29:15 +10:00
Dave Airlie
3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
Alex Deucher
5801ead6bd drm/radeon/kms: add support for DP modesetting
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:44 +10:00
Alex Deucher
1a66c95a64 drm/radeon/kms: DP fixes and cleanup from the ddx
- dpcp -> dpcd
- fix up dig encoder routing
- aux transaction table takes delay in 10 usec units

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:40 +10:00
Dave Airlie
746c1aa4d1 drm/radeon/kms: initial radeon displayport porting
This is enough to retrieve EDID and DPCP.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:31 +10:00
Dave Airlie
ab2c067298 drm/intel: refactor DP i2c support and DP common header to drm helper
Both radeon and nouveau can re-use this code so move it up a level
so they can. However the hw interfaces for aux ch are different
enough that the code to translate from mode, address, bytes
to actual hw interfaces isn't generic, so move that code into the
Intel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 09:24:23 +10:00
Thomas Hellstrom
4bfd75cb08 drm/ttm: Export symbols needed for the vmwgfx driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:07 +10:00
Thomas Hellstrom
c078aa2fc4 drm/ttm: Add TTM execbuf utilities.
Utilities to reserve, unreserve and fence a list of TTM
buffer objects in a deadlock-safe manner.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:05 +10:00
Thomas Hellstrom
4aff1013f5 drm/ttm: Add ttm lock functionality.
This is intended to be used by ttm-aware drivers to
1) Block clients to inactive masters when
they try to validate buffers for GPU use.
2) Optionally block clients to the current master when
there is thrashing due to GPU memory shortage.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:03 +10:00
Thomas Hellstrom
88071539a3 drm/ttm: Add user-space objects.
Add objects needed for user-space to maintain reference counts on ttm objects.
This is used by the vmwgfx driver which allows user-space to maintain
map-counts on dma buffers, lock-counts on the ttm lock and ref-counts on
gpu surfaces, gpu contexts and dma buffer.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:01 +10:00
Jakob Bornecrantz
884840aa3c drm: Add dirty ioctl and property
This commit adds a ioctl and property to allow userspace
to notify the kernel that a framebuffer has changed. Instead
of snooping the command stream this allows finer grained
tracking of which areas have changed.

The primary user for this functionality is virtual hardware
like the vmware svga device, but also Xen hardware likes to
be notify. There is also real hardware like DisplayLink and
DisplayPort that might take advantage of this ioctl.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:25:47 +10:00
Martin Michlmayr
c3a73ba13b drm/ttm: Fix build failure due to missing struct page
drm/ttm fails to build on MIPS because "struct page" is not known:
| In file included from drivers/gpu/drm/ttm/ttm_memory.c:28:
| include/drm/ttm/ttm_memory.h:154: warning: 'struct page' declared inside parameter list
| include/drm/ttm/ttm_memory.h:154: warning: its scope is only this definition or declaration, which is probably not what you want
| include/drm/ttm/ttm_memory.h:156: warning: 'struct page' declared inside parameter list
| drivers/gpu/drm/ttm/ttm_memory.c:540: error: conflicting types for 'ttm_mem_global_alloc_page'
| include/drm/ttm/ttm_memory.h:154: error: previous declaration of 'ttm_mem_global_alloc_page' was here
| drivers/gpu/drm/ttm/ttm_memory.c:561: error: conflicting types for 'ttm_mem_global_free_page'
| include/drm/ttm/ttm_memory.h:156: error: previous declaration of 'ttm_mem_global_free_page' was here

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: stable@kernel.org
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:11:16 +10:00
Kristian Høgsberg
1a95916f54 drm: Add compatibility #ifdefs for *BSD
This let's use use the linux drm headers as the canonical source for
libdrm on all platforms.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:59:28 +10:00
Thomas Hellstrom
862302ffe4 drm: Add support for drm master_[set|drop] callbacks.
The vmwgfx driver has a per master rw lock around TTM, to guarantee 
mutual exclusion when needed.

This is typically when all evictable buffers are evicted due to

1) vt switch
2) master switch
3) suspend / resume.

In the multi-master case, on master switch the new master takes the 
previously active master lock in write mode, and then evicts all 
buffers. Any clients to previous masters will then block on that lock 
when trying to validate a buffer. fbdev also acts as a virtual master
wrt this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:55:46 +10:00
Adam Jackson
9340d8cfea drm/edid: Decode 3-byte CVT codes from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:47 +10:00
Adam Jackson
2dbdc52c81 drm/edid: Add new detailed block types from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:40 +10:00
Adam Jackson
7ac96a9cb4 drm/modes: Add drm_mode_hsync()
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:22 +10:00
Kristian Høgsberg
04b2d21800 drm/i915: Fix typo in ioctl struct name.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:29:47 -08:00
Li Peng
778c902640 drm/i915: Fix sync to vblank when VGA output is turned off
In current vblank-wait implementation, if we turn off VGA output,
drm_wait_vblank will still wait on the disabled pipe until timeout,
because vblank on the pipe is assumed be enabled. This would cause
slow system response on some system such as moblin.

This patch resolve the issue by adding a drm helper function
drm_vblank_off which explicitly clear vblank_enabled[crtc], wake up
any waiting queue and save last vblank counter before turning off
crtc. It also slightly change drm_vblank_get to ensure that we will
will return immediately if trying to wait on a disabled pipe.

Signed-off-by: Li Peng <peng.li@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: hand-applied for conflicts with overlay changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:27:40 -08:00
Jesse Barnes
e9560f7cb2 drm/i915: add GETPARAM request for page flipping
Add a GETPARAM request for checking if page flipping is supported.
Useful for the 2D driver to enable the flipping path.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:19:07 -08:00
Jesse Barnes
7bd4d7be5c drm: use page flip event to signal flip completion
We don't actually know which frame number the flip will complete on, so
userspace needs a specific flip notification to tell it when the last flip
completed.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2009-12-01 09:11:53 -08:00
Eric Anholt
f40d6817a5 Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-12-01 09:01:54 -08:00
Eric Anholt
c8e0f93a38 drm/i915: Replace a calloc followed by copying data over it with malloc.
Execbufs involve quite a bit of payload, to the extent that cache misses
show up in the profiles here, and a suspicion that some of those cachelines
may get evicted and then reloaded in the subsequent copy.

This is still abstracted like drm_calloc_large since we want to check for
size overflow, and because we want to choose between kmalloc and vmalloc
on the fly.  cairo's interface for malloc-with-calloc's-args was used as
the model.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 06:36:21 -08:00
Clemens Ladisch
7a654158bd drm: set the type of the drm_framebuffer::fbdev field
The fbdev field of the drm_framebuffer structure is always used to store
a pointer to a fb_info, so there is no reason for it to be void*.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-19 13:02:49 +10:00
Kristian Høgsberg
d91d8a3f88 drm/kms: add page flipping ioctl
This adds a page flipping ioctl to the KMS API.  The ioctl takes an fb ID
and a ctrc ID and flips the crtc to the given fb at the next vblank.
The ioctl returns immediately but the flip doesn't happen until after
any rendering that's currently queued up against the new framebuffer
is done.  After submitting a page flip, any execbuffer involving the
old front buffer will block until the flip is completed.

Optionally, a vblank event can be generated when the swap eventually
happens.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:05:47 +10:00
Andres Salomon
156822f717 drm: kill more unused DRM macros
There are a few more macros in drmP.h that are unused; DRM_GET_PRIV_SAREA,
DRM_ARRAY_SIZE, and DRM_WAITCOUNT can go away completely.

Unfortunately, DRM_COPY is still used in one place, but we can at least
move it to where it's used.  It's an awful looking macro..

[akpm: fix overeagerness]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Andres Salomon
420a457088 drm: kill some unused DRM_PROC macros from drmP.h
i915_gem_proc.c appears to have been the last user of the DRM_PROC_*
macros, and it has gone away.  The macros should die as well.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Kristian Høgsberg
c9a9c5e02a drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:47 +10:00
Eric Anholt
5b8f0be0dc Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-11-05 15:04:06 -08:00
Daniel Vetter
02e792fbaa drm/i915: implement drmmode overlay support v4
This implements intel overlay support for kms via a device-specific
ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on
dri-devel). We've reached the conclusion that such an infrastructure
only makes sense when multiple kms overlay implementations exists,
which atm don't (and it doesn't look like this is gonna change).

Open issues:
- Runs in sync with the gpu, i.e. unnecessary waiting. I've decided
  to wait on this because the hw tends to hang when changing something
  in this area. I left some dummy functions as infrastructure.
- polyphase filtering uses a static table.
- uses uninterruptible sleeps. Unfortunately the alternatives may
  unnecessarily wedged the hw if/when we timeout too early (and
  userspace only overloaded the batch buffers with stuff worth a few
  secs of gpu time).

Changes since v1:
- fix off-by-one misconception on my side. This fixes fullscreen
  playback.
Changes since v2:
- add underrun detection as spec'ed for i965.
- flush caches properly, fixing visual corruptions.
Changes since v4:
- fix up cache flushing of overlay memory regs.
- killed require_pipe_a logic - it hangs the chip.

Tested-By: diego.abelenda@gmail.com (on a 865G)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[anholt: Resolved against the MADVISE ioctl going in before this one]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:08 -08:00
Daniel Vetter
48764bf43f drm/i915: add i915_lp_ring_sync helper
This just waits until the hw passed the current ring position with
cmd execution. This slightly changes the existing i915_wait_request
function to make uninterruptible waiting possible - no point in
returning to userspace while mucking around with the overlay, that
piece of hw is just too fragile.

Also replace a magic 0 with the symbolic constant (and kill the then
superflous comment) while I was looking at the code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:07 -08:00
Daniel Vetter
7a9c906094 drm: make drm_mode_object_find typesafe
I've wasted half a day hunting a bug that could easily be spotted by
gcc. Prevent this from reoccurring.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:06 -08:00
Kristian Høgsberg
c182be37ed drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-26 13:29:27 +10:00
Dave Airlie
c1176d6f03 Merge branch 'drm-next' of ../drm-next into drm-linus
conflict in radeon since new init path merged with vga arb code.

Conflicts:
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_asic.h
	drivers/gpu/drm/radeon/radeon_device.c
2009-10-08 14:03:05 +10:00