* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
wimax/i2400m: add CREDITS and MAINTAINERS entries
wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
i2400m: Makefile and Kconfig
i2400m/SDIO: TX and RX path backends
i2400m/SDIO: firmware upload backend
i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
i2400m/SDIO: header for the SDIO subdriver
i2400m/USB: TX and RX path backends
i2400m/USB: firmware upload backend
i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
i2400m/USB: header for the USB bus driver
i2400m: debugfs controls
i2400m: various functions for device management
i2400m: RX and TX data/control paths
i2400m: firmware loading and bootrom initialization
i2400m: linkage to the networking stack
i2400m: Generic probe/disconnect, reset and message passing
i2400m: host/device procotol and core driver definitions
i2400m: documentation and instructions for usage
wimax: Makefile, Kconfig and docbook linkage for the stack
...
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async:
async: don't do the initcall stuff post boot
bootchart: improve output based on Dave Jones' feedback
async: make the final inode deletion an asynchronous event
fastboot: Make libata initialization even more async
fastboot: make the libata port scan asynchronous
fastboot: make scsi probes asynchronous
async: Asynchronous function calls to speed up kernel boot
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Fix typo in gfs_page_mkwrite()
GFS2: LSF and LBD are now one and the same
GFS2: Set GFP_NOFS when allocating page on write
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
trivial: chack -> check typo fix in main Makefile
trivial: Add a space (and a comma) to a printk in 8250 driver
trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
trivial: Fix misspelling of "firmware" in powerpc Makefile
trivial: Fix misspelling of "firmware" in usb.c
trivial: Fix misspelling of "firmware" in qla1280.c
trivial: Fix misspelling of "firmware" in a100u2w.c
trivial: Fix misspelling of "firmware" in megaraid.c
trivial: Fix misspelling of "firmware" in ql4_mbx.c
trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
trivial: Fix misspelling of "firmware" in ipw2100.c
trivial: Fix misspelling of "firmware" in atmel.c
trivial: Fix misspelled firmware in Kconfig
trivial: fix an -> a typos in documentation and comments
trivial: fix then -> than typos in comments and documentation
trivial: update Jesper Juhl CREDITS entry with new email
trivial: fix singal -> signal typo
trivial: Fix incorrect use of "loose" in event.c
trivial: printk: fix indentation of new_text_line declaration
trivial: rtc-stk17ta8: fix sparse warning
...
In the same spirit as debugfs_create_*(), introduce helpers for
exporting size_t values over debugfs.
The only trick done is that the format verifier is kept at %llu
instead of %zu; otherwise type warnings would pop up:
format ‘%zu’ expects type ‘size_t’, but argument 2 has type ‘long long unsigned int’
There is no real way to fix this one--however, we can consider %llu
and %zu to be compatible if we consider that we are using the same for
validating in debugfs_create_{x,u}{8,16,32}().
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this makes "rm -rf" on a (names cached) kernel tree go from
11.6 to 8.6 seconds on an ext3 filesystem
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
There is a typo in gfs2_page_mkwrite()
gfs2_write_alloc_required() expects pos to be the offset in bytes. However,
instead of the page index being shifted by by PAGE_CACHE_SHIFT, it was shifted
by (PAGE_CACHE_SIZE - inode->i_blkbits). This patch simply shifts the page
index by the proper amount.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to ensure that we always set GFP_NOFS in this one
particular case when allocating pages for write.
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up annotations of fc->lock
fuse: fix sparse warning in ioctl
fuse: update interface version
fuse: add fuse_conn->release()
fuse: separate out fuse_conn_init() from new_conn()
fuse: add fuse_ prefix to several functions
fuse: implement poll support
fuse: implement unsolicited notification
fuse: add file kernel handle
fuse: implement ioctl support
fuse: don't let fuse_req->end() put the base reference
fuse: move FUSE_MINOR to miscdevice.h
fuse: style fixes
Since all sanity checks rely on the validity of s_start which gets only
checked to be smaller than s_end, we should also check if s_end is sane.
Now we also try to retrieve the last block of the filesystem, which is
computed by s_end. If this fails, something is bogus.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bfs_fill_super() already touches all inodes, so we can easily add some
cheap sanity checks and check if the inode start and end blocks are
smaller than the maximum number of blocks, the inode start block lies
behind the end block or the file end offset is behind the end of the
filesystem. Also check if the start of data offset in the super block
fits the filesystem.
The added sanity checks catch softlockup issues early when we try to
sb_bread() lots of blocks in a loop in bfs_readdir() and bfs_find_entry().
In addition an oom issue in bfs_fill_super() is prevented by this when
s_start is corrupted, which influences imap_len and we try to allocate a
huge info->si_imap.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No one cares do_coredump()'s return value, and also it seems that it
is also not necessary. So make it void.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the add link method. The oosition in the directory was calculated in
wrong way - it had the incorrect shift direction.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org> [2.6.lots]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In function validate_dev_ioctl() we check that the string we've been sent
is a valid path. The function that does this check assumes the string is
NULL terminated but our NULL termination check isn't done until after this
call. This patch changes the order of the check.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- the type assigned at mount when no type is given is changed
from 0 to AUTOFS_TYPE_INDIRECT. This was done because 0 and
AUTOFS_TYPE_INDIRECT were being treated implicitly as the same
type.
- previously, an offset mount had it's type set to
AUTOFS_TYPE_DIRECT|AUTOFS_TYPE_OFFSET but the mount control
re-implementation needs to be able distinguish all three types.
So this was changed to make the type setting explicit.
- a type AUTOFS_TYPE_ANY was added for use by the re-implementation
when checking if a given path is a mountpoint. It's not really a
type as we use this to ask if a given path is a mountpoint in the
autofs_dev_ioctl_ismountpoint() function.
- functions to set and test the autofs mount types have been added to
improve readability and make the type usage explicit.
- the mount type is used from user space for the mount control
re-implementtion so, for consistency, all the definitions have
been moved to the user space include file include/linux/auto_fs4.h.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A local definition of devid in autofs_dev_ioctl_ismountpoint() shadows
the fuction wide definition.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The parameter usage in the device node ioctl code uses arg1 and arg2 as
parameter names. This patch redefines the parameter names to reflect what
they actually are in an effort to make the code more readable.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arguments lower_dentry and ecryptfs_dentry in ecryptfs_create_underlying_file()
have been merged into dentry, now fix it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Flesh out the comments for ecryptfs_decode_from_filename(). Remove the
return condition, since it is always 0.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct several format string data type specifiers. Correct filename size
data types; they should be size_t rather than int when passed as
parameters to some other functions (although note that the filenames will
never be larger than int).
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
%Z is a gcc-ism. Using %z instead.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable mount-wide filename encryption by providing the Filename Encryption
Key (FNEK) signature as a mount option. Note that the ecryptfs-utils
userspace package versions 61 or later support this option.
When mounting with ecryptfs-utils version 61 or later, the mount helper
will detect the availability of the passphrase-based filename encryption
in the kernel (via the eCryptfs sysfs handle) and query the user
interactively as to whether or not he wants to enable the feature for the
mount. If the user enables filename encryption, the mount helper will
then prompt for the FNEK signature that the user wishes to use, suggesting
by default the signature for the mount passphrase that the user has
already entered for encrypting the file contents.
When not using the mount helper, the user can specify the signature for
the passphrase key with the ecryptfs_fnek_sig= mount option. This key
must be available in the user's keyring. The mount helper usually takes
care of this step. If, however, the user is not mounting with the mount
helper, then he will need to enter the passphrase key into his keyring
with some other utility prior to mounting, such as ecryptfs-manager.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the requisite modifications to ecryptfs_filldir(), ecryptfs_lookup(),
and ecryptfs_readlink() to call out to filename encryption functions.
Propagate filename encryption policy flags from mount-wide crypt_stat to
inode crypt_stat.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions support encrypting and encoding the filename contents.
The encrypted filename contents may consist of any ASCII characters. This
patch includes a custom encoding mechanism to map the ASCII characters to
a reduced character set that is appropriate for filenames.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extensions to the header file to support filename encryption.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset implements filename encryption via a passphrase-derived
mount-wide Filename Encryption Key (FNEK) specified as a mount parameter.
Each encrypted filename has a fixed prefix indicating that eCryptfs should
try to decrypt the filename. When eCryptfs encounters this prefix, it
decodes the filename into a tag 70 packet and then decrypts the packet
contents using the FNEK, setting the filename to the decrypted filename.
Both unencrypted and encrypted filenames can reside in the same lower
filesystem.
Because filename encryption expands the length of the filename during the
encoding stage, eCryptfs will not properly handle filenames that are
already near the maximum filename length.
In the present implementation, eCryptfs must be able to produce a match
against the lower encrypted and encoded filename representation when given
a plaintext filename. Therefore, two files having the same plaintext name
will encrypt and encode into the same lower filename if they are both
encrypted using the same FNEK. This can be changed by finding a way to
replace the prepended bytes in the blocked-aligned filename with random
characters; they are hashes of the FNEK right now, so that it is possible
to deterministically map from a plaintext filename to an encrypted and
encoded filename in the lower filesystem. An implementation using random
characters will have to decode and decrypt every single directory entry in
any given directory any time an event occurs wherein the VFS needs to
determine whether a particular file exists in the lower directory and the
decrypted and decoded filenames have not yet been extracted for that
directory.
Thanks to Tyler Hicks and David Kleikamp for assistance in the development
of this patchset.
This patch:
A tag 70 packet contains a filename encrypted with a Filename Encryption
Key (FNEK). This patch implements functions for writing and parsing tag
70 packets. This patch also adds definitions and extends structures to
support filename encryption.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are no argument named @flag in ncp_getopt(), remove it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following is what it looks like before patching.
It is not much readable.
user@ubuntu:/proc/sys/fs/binfmt_misc$ cat status
enableduser@ubuntu:/proc/sys/fs/binfmt_misc$
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix function parameter name in kernel-doc:
Warning(linux-2.6.28-git5//fs/block_dev.c:1272): No description found for parameter 'pathname'
Warning(linux-2.6.28-git5//fs/block_dev.c:1272): Excess function parameter 'path' description in 'lookup_bdev'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc notation:
Warning(linux-2.6.28-git3//fs/inode.c:120): No description found for parameter 'sb'
Warning(linux-2.6.28-git3//fs/inode.c:120): No description found for parameter 'inode'
Warning(linux-2.6.28-git3//fs/inode.c:588): No description found for parameter 'sb'
Warning(linux-2.6.28-git3//fs/inode.c:588): No description found for parameter 'inode'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's possible to register a chrdev with a name size exactly the same as
was allocated in structure. It seems it was not intended behaviour.
At least chrdev_show does not like it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For NR_CPUS >= 16 values, FBC_BATCH is 2*NR_CPUS
Considering more and more distros are using high NR_CPUS values, it makes
sense to use a more sensible value for FBC_BATCH, and get rid of NR_CPUS.
A sensible value is 2*num_online_cpus(), with a minimum value of 32 (This
minimum value helps branch prediction in __percpu_counter_add())
We already have a hotcpu notifier, so we can adjust FBC_BATCH dynamically.
We rename FBC_BATCH to percpu_counter_batch since its not a constant
anymore.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
f_op->poll is the only vfs operation which is not allowed to sleep. It's
because poll and select implementation used task state to synchronize
against wake ups, which doesn't have to be the case anymore as wait/wake
interface can now use custom wake up functions. The non-sleep restriction
can be a bit tricky because ->poll is not called from an atomic context
and the result of accidentally sleeping in ->poll only shows up as
temporary busy looping when the timing is right or rather wrong.
This patch converts poll/select to use custom wake up function and use
separate triggered variable to synchronize against wake up events. The
only added overhead is an extra function call during wake up and
negligible.
This patch removes the one non-sleep exception from vfs locking rules and
is beneficial to userland filesystem implementations like FUSE, 9p or
peculiar fs like spufs as it's very difficult for those to implement
non-sleeping poll method.
While at it, make the following cosmetic changes to make poll.h and
select.c checkpatch friendly.
* s/type * symbol/type *symbol/ : three places in poll.h
* remove blank line before EXPORT_SYMBOL() : two places in select.c
Oleg: spotted missing barrier in poll_schedule_timeout()
Davide: spotted missing write barrier in pollwake()
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Brad Boyer <flar@allandria.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Roland McGrath <roland@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Have one option to control Miscellaneous filesystems. This makes it easy
to disable all of them at one time.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Untangle the error unwinding in this function, saving a test of local
variable `vma'.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
s_syncing livelock avoidance was breaking data integrity guarantee of
sys_sync, by allowing sys_sync to skip writing or waiting for superblocks
if there is a concurrent sys_sync happening.
This livelock avoidance is much less important now that we don't have the
get_super_to_sync() call after every sb that we sync. This was replaced
by __put_super_and_need_restart.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix data integrity semantics required by sys_sync, by iterating over all
inodes and waiting for any writeback pages after the initial writeout.
Comments explain the exact problem.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove WB_SYNC_HOLD. The primary motiviation is the design of my
anti-starvation code for fsync. It requires taking an inode lock over the
sync operation, so we could run into lock ordering problems with multiple
inodes. It is possible to take a single global lock to solve the ordering
problem, but then that would prevent a future nice implementation of "sync
multiple inodes" based on lock order via inode address.
Seems like a backward step to remove this, but actually it is busted
anyway: we can't use the inode lists for data integrity wait: an inode can
be taken off the dirty lists but still be under writeback. In order to
satisfy data integrity semantics, we should wait for it to finish
writeback, but if we only search the dirty lists, we'll miss it.
It would be possible to have a "writeback" list, for sys_sync, I suppose.
But why complicate things by prematurely optimise? For unmounting, we
could avoid the "livelock avoidance" code, which would be easier, but
again premature IMO.
Fixing the existing data integrity problem will come next.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WB_SYNC_HOLD is going to be zapped so we should not use it. Use
%WB_SYNC_NONE instead. Here is what akpm said:
"I think I'll just switch that to WB_SYNC_NONE. The `wait==0' mode is
just an advisory thing to help the fs shove lots of data into the
queues. If some gets missed then it'll be picked up on the second
->sync_fs call, with wait==1."
Thanks to Randy Dunlap for catching this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
unsigned long ret cannot be negative, but ret can get -EFAULT.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case of error extending write may have instantiated a few blocks
outside i_size. We need to trim these blocks. We have to do it
*regardless* to blocksize. At least ext2, ext3 and reiserfs interpret
(i_size < biggest block) condition as error. Fsck will complain about
wrong i_size. Then fsck will fix the error by changing i_size according
to the biggest block. This is bad because this blocks contain garbage
from previous write attempt. And result in data corruption.
####TESTCASE_BEGIN
$touch /mnt/test/BIG_FILE
## at this moment /mnt/test/BIG_FILE size and blocks equal to zero
open("/mnt/test/BIG_FILE", O_WRONLY|O_CREAT|O_DIRECT, 0666) = 3
write(3, "aaaaaaaaaaaa"..., 104857600) = -1 ENOSPC (No space left on device)
## size and block sould't be changed because write op failed.
$stat /mnt/test/BIG_FILE
File: `/mnt/test/BIG_FILE'
Size: 0 Blocks: 110896 IO Block: 1024 regular empty file
<<<<<<<<^^^^^^^^^^^^^^^^^^^^^^^^^^^^^file size is less than biggest block idx
Device: fe07h/65031d Inode: 14 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2007-01-24 20:03:38.000000000 +0300
Modify: 2007-01-24 20:03:38.000000000 +0300
Change: 2007-01-24 20:03:39.000000000 +0300
#fsck.ext3 -f /dev/VG/test
e2fsck 1.39 (29-May-2006)
Pass 1: Checking inodes, blocks, and sizes
Inode 14, i_size is 0, should be 56556544. Fix<y>? yes
Pass 2: Checking directory structure
....
#####TESTCASE_ENDdiff --git a/fs/direct-io.c b/fs/direct-io.c
index af0558d..4e88bea 100644
[akpm@linux-foundation.org: use i_size_read()]
Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GFP_HIGHUSER_PAGECACHE is just an alias for GFP_HIGHUSER_MOVABLE, making
that harder to track down: remove it, and its out-of-work brothers
GFP_NOFS_PAGECACHE and GFP_USER_PAGECACHE.
Since we're making that improvement to hotremove_migrate_alloc(), I think
we can now also remove one of the "o"s from its comment.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is known that buffer_mapped() is false in this code path.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>