1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly
-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
so adjust some calling later in setup.c::setup_arch()
-- corruption_check and mptable_update
-v2: Move reserve_brk() early
Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
that could happen We have more then 128 RAM entry in E820 tables, and
memblock_x86_fill() could use memblock_find_in_range() to find a new place for
memblock.memory.region array.
and We don't need to use extend_brk() after fill_memblock_area()
So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
memblock.reserved already..
use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
active_region for 32bit does include high pages
need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline
Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Also let memblock_x86_reserve_range/memblock_x86_free_range could print out name if memblock=debug is
specified
will also print ther name when reserve_memblock_area/free_memblock_area are called.
-v2: according to Ingo, put " if (memblock_debug) " in one place
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
It will return memory size in specified range according to memblock.memory.region
Try to share some code with memblock_x86_free_memory_in_range() by passing get_free to
__memblock_x86_memory_in_range().
-v2: Ben want _in_range in the name instead of size
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
It will return free memory size in specified range.
We can not use memory_size - reserved_size here, because some reserved area
may not be in the scope of memblock.memory.region.
Use memblock.memory.region subtracting memblock.reserved.region to get free range array.
then count size of all free ranges.
-v2: Ben insist on using _in_range
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
It can be used to find NODE_DATA for numa.
Need to make sure early_node_map[] is filled before it is called, otherwise
it will fallback to memblock_find_in_range(), with node range.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
According to node range in early_node_map[] with __memblock_find_in_range
to find free range.
Will be used by memblock_x86_find_in_range_node()
memblock_x86_find_in_range_node will be used to find right buffer for NODE_DATA
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
memblock_x86_register_active_regions() will be used to fill early_node_map,
the result will be memblock.memory.region AND numa data
memblock_x86_hole_size will be used to find hole size on memblock.memory.region
with specified range.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
get_free_all_memory_range is for CONFIG_NO_BOOTMEM=y, and will be called by
free_all_memory_core_early().
It will use early_node_map aka active ranges subtract memblock.reserved to
get all free range, and those ranges will convert to slab pages.
-v4: increase range size
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
They are wrappers for core versions, which take start/end/name instead
of base/size. This will make x86 conversion eaasier.
could add more debug print out
-v2: change get_max_mapped() to memblock.default_alloc_limit according to Michael
Ellerman and Ben
change to memblock_x86_reserve_range and memblock_x86_free_range according to Michael Ellerman
-v3: call check_and_double after reserve/free, so could avoid to use
find_memblock_area. Suggested by Michael Ellerman
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
memblock_x86_to_bootmem() will reserve memblock.reserved.region in
bootmem after bootmem is set up.
We can use it to with all arches that support memblock later.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
It will be used memblock_x86_to_bootmem converting
It is an wrapper for reserve_bootmem, and x86 64bit is using special one.
Also clean up that version for x86_64. We don't need to take care of numa
path for that, bootmem can handle it how
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
size is returned according free range.
Will be used to find free ranges for early_memtest and memory corruption check
Do not mess it up with lib/memblock.c yet.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
So we can avoid export memblock_reserved_init_regions()
Suggested by Ben.
-v2: use __init_memblock attribute
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This is a wrapper for memblock_find_base() using slightly different
arguments (start,end instead of start,size for example) in order to
make it easier to convert existing arch/x86 code.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Arch code can define ARCH_DISCARD_MEMBLOCK in asm/memblock.h,
which in turns causes memblock code and data to go respectively
into the .init and .initdata sections. This will be used by the
x86 architecture.
If ARCH_DISCARD_MEMBLOCK is defined, the debugfs files to inspect
the memblock arrays after boot are not created.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This should make it easier to catch/debug incorrect use when
the CONFIG_ option isn't set.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
And ensure we don't hand out 0 as a valid allocation. We put the
low limit at PAGE_SIZE arbitrarily.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
will used by x86 memblock_x86_find_in_range_node and nobootmem replacement
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Print out the location info in addition to which array is being
resized. Also use memblocK_dbg() to put that under control of
the memblock_debug flag.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This exposes memblock_debug and associated memblock_dbg() macro,
along with memblock_can_resize so that x86 can use these when
ported to use memblock
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
memblock_alloc_nid() used to fallback to allocating anywhere by using
memblock_alloc() as a fallback.
However, some of my previous patches limit memblock_alloc() to the region
covered by MEMBLOCK_ALLOC_ACCESSIBLE which is not quite what we want
for memblock_alloc_try_nid().
So we fix it by explicitely using MEMBLOCK_ALLOC_ANYWHERE.
Not that so far only sparc uses memblock_alloc_nid() and it hasn't been updated
to clamp the accessible zone yet. Thus the temporary "breakage" should have
no effect.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The former is now strict, it will fail if it cannot honor the allocation
within the node, while the later implements the previous semantic which
falls back to allocating anywhere.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We now provide a default (weak) implementation of memblock_nid_range()
which uses the early_pfn_map[] if CONFIG_ARCH_POPULATES_NODE_MAP
is set. Sparc still needs to use its own method due to the way
the pages can be scattered between nodes.
This implementation is inefficient due to our main algorithm and
callback construct wanting to work on an ascending addresses bases
while early_pfn_map[] would rather work with nid's (it's unsorted
at that stage). But it should work and we can look into improving
it subsequently, possibly using arch compile options to chose a
different algorithm alltogether.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To constraint the search of a region between two boundaries,
which will be used by the new NUMA aware allocator among others.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Some archs such as ARM want to avoid coalescing accross things such
as the lowmem/highmem boundary or similar. This provides the option
to control it via an arch callback for which a weak default is provided
which always allows coalescing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When one of the array gets full, we resize it. After much thinking and
a few iterations of that code, I went back to on-demand resizing using
the (new) internal memblock_find_base() function, which is pretty much what
Yinghai initially proposed, though there some differences in the details.
To work this relies on the default alloc limit being set sensibly by
the architecture.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Some shuffling is needed for doing array resize so we may as well
put some sense into the ordering of the functions in the whole memblock.c
file. No code change. Added some comments.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This will be used by the array resize code and might prove useful
to some arch code as well at which point it can be made non-static.
Also add comment as to why aligning size is important
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2. Fix loss of size alignment
v3. Fix result code
This function will be used to locate a free area to put the new memblock
arrays when attempting to resize them. memblock_alloc_region() is gone,
the two callsites now call memblock_add_region().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2. Fix membase_alloc_nid_region() conversion
Since we allocate one more than needed, why not do a bit of sanity checking
here to ensure we don't walk past the end of the array ?
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This is in preparation for having resizable arrays.
Note that we still allocate one more than needed, this is unchanged from
the previous implementation.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Right now, both the "memory" and "reserved" memblock_type structures have
a "size" member. It represents the calculated memory size in the former
case and is unused in the latter.
This moves it out to the main memblock structure instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Let's not waste space and cycles on archs that don't support >32-bit
physical address space.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The RMA (RMO is a misnomer) is a concept specific to ppc64 (in fact
server ppc64 though I hijack it on embedded ppc64 for similar purposes)
and represents the area of memory that can be accessed in real mode
(aka with MMU off), or on embedded, from the exception vectors (which
is bolted in the TLB) which pretty much boils down to the same thing.
We take that out of the generic MEMBLOCK data structure and move it into
arch/powerpc where it belongs, renaming it to "RMA" while at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).
The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.
It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.
Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().
The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
