This patch is to fix a memory leak in the open method, it reviews error
conditions freeing the resources previously allocated and not freed in
cased of DMA failure.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the removal of rt->n we do not create a neighbour entry at route
insertion time (rt6_bind_neighbour is gone). As long as no neighbour is
created because of "useful traffic" we skip this routing entry because
rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and
thus returns false.
This change was introduced by commit
887c95cc1d ("ipv6: Complete neighbour
entry removal from dst_entry.")
To quote RFC4191:
"If the host has no information about the router's reachability, then
the host assumes the router is reachable."
and also:
"A host MUST NOT probe a router's reachability in the absence of useful
traffic that the host would have sent to the router if it were reachable."
So, just assume the router is reachable and let's rt6_probe do the
rest. We don't need to create a neighbour on route insertion time.
If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support)
a neighbour is only valid if its nud_state is NUD_VALID. I did not find
any references that we should probe the router on route insertion time
via the other RFCs. So skip this route in that case.
v2:
a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov)
Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ping_v6_sendmsg currently returns 0 on success. It should return
the number of bytes written instead.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit aec0a40a6f ("netem: use rb tree to implement the time queue")
added a regression if a child qdisc is attached to netem, as we perform
a NULL dereference.
Fix this by adding a temporary variable to cache
netem_skb_cb(skb)->time_to_send.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit eea86af6b1 ("net: sock: adapt SOCK_MIN_RCVBUF and
SOCK_MIN_SNDBUF") forgot the sk_buff alignment taken into account
in __alloc_skb() : skb->truesize = SKB_TRUESIZE(size);
While above commit fixed the sender issue, the receiver is still
dropping the second packet (on loopback device), because the receiver
socket can not really hold two skbs :
First packet truesize already is above sk_rcvbuf, so even TCP coalescing
cannot help.
On a typical 64bit build, each tcp skb truesize is 2304, instead of 2272
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"work" needs to be freed before returning on this error path.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inner_protocol was added to struct sk_buff in
0d89d2035f ("MPLS: Add limited GSO support"),
which is scheduled to be included in v3.11.
That patch did not update __copy_skb_header to copy the inner_protocol.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enables the driver to take advantage of the FEC VLAN
indicator to improve performance.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately, WoL is broken and the system will immediately
resume after suspending, and I can't seem to figure out why.
Remove WoL support until the issue can be found.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
drivers/net/ethernet/renesas/sh_eth.c
net/ipv4/gre.c
The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.
The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.
Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to TCP/UDP offloading, move all related GRE functions to
gre_offload.c to make things more explicit and similar to the rest
of the code.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
correct placeholder declarations to prevent build breakage when
!CONFIG_NET_LL_RX_POLL
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In path mtu check, ip header total length works for gre device
but not for gre-tap device. Use skb len which is consistent
for all tunneling types. This is old bug in gre.
This also fixes mtu calculation bug introduced by
commit c544193214 (GRE: Refactor GRE tunneling code).
Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Chapman says:
====================
L2TP data sequence numbers, if enabled, ensure in-order delivery. A
receiver may reorder data packets, or simply drop out-of-sequence
packets. If reordering is not enabled, the current implementation does
not handle data packet loss correctly, which can result in a stalled
L2TP session datapath as soon as the first packet is lost. Most L2TP
users either disable sequence numbers or enable data packet reordering
when sequence numbers are used to circumvent the issue. This patch
series fixes the problem, and makes the L2TP sequence number handling
RFC-compliant.
v2 incorporates string format changes requested by sergei.shtylyov@cogentembedded.com.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If L2TP data sequence numbers are enabled and reordering is not
enabled, data reception stops if a packet is lost since the kernel
waits for a sequence number that is never resent. (When reordering is
enabled, data reception restarts when the reorder timeout expires.) If
no reorder timeout is set, we should count the number of in-sequence
packets after the out-of-sequence (OOS) condition is detected, and reset
sequence number state after a number of such packets are received.
For now, the number of in-sequence packets while in OOS state which
cause the sequence number state to be reset is hard-coded to 5. This
could be configurable later.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The L2TP datapath is not currently RFC-compliant when sequence numbers
are used in L2TP data packets. According to the L2TP RFC, any received
sequence number NR greater than or equal to the next expected NR is
acceptable, where the "greater than or equal to" test is determined by
the NR wrap point. This differs for L2TPv2 and L2TPv3, so add state in
the session context to hold the max NR value and the NR window size in
order to do the acceptable sequence number value check. These might be
configurable later, but for now we derive it from the tunnel L2TP
version, which determines the sequence number field size.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change moves some code handling data sequence numbers into a
separate function to avoid too much indentation. This is to prepare
for some changes to data sequence number handling in subsequent
patches.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.
This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.
The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior this patch, the internal debugging was based on ifdef
and also some printk were useless because many info are exposed
via ethtool.
This patch remove all the ifdef defines and now we only use
netif_msg_XXX levels.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev_forward_skb() assignment of pkt_type should be done
after the call to eth_type_trans().
ip-encapsulated packets can be handled by localhost. But skb->pkt_type
can be PACKET_OTHERHOST when packet comes via veth into ip tunnel device.
In that case, the packet is dropped by ip_rcv().
Although this example uses gretap. l2tp-eth also has same issue.
For l2tp-eth case, add dummy device for ip address and ip l2tp command.
netns A | root netns | netns B
veth<->veth=bridge=gretap <-loop back-> gretap=bridge=veth<->veth
arp packet ->
pkt_type
BROADCAST------------>ip_rcv()------------------------>
<- arp reply
pkt_type
ip_rcv()<-----------------OTHERHOST
drop
sample operations
ip link add tapa type gretap remote 172.17.107.4 local 172.17.107.3
ip link add tapb type gretap remote 172.17.107.3 local 172.17.107.4
ip link set tapa up
ip link set tapb up
ip address add 172.17.107.3 dev tapa
ip address add 172.17.107.4 dev tapb
ip route get 172.17.107.3
> local 172.17.107.3 dev lo src 172.17.107.3
> cache <local>
ip route get 172.17.107.4
> local 172.17.107.4 dev lo src 172.17.107.4
> cache <local>
ip link add vetha type veth peer name vetha-peer
ip link add vethb type veth peer name vethb-peer
brctl addbr bra
brctl addbr brb
brctl addif bra tapa
brctl addif bra vetha-peer
brctl addif brb tapb
brctl addif brb vethb-peer
brctl show
> bridge name bridge id STP enabled interfaces
> bra 8000.6ea21e758ff1 no tapa
> vetha-peer
> brb 8000.420020eb92d5 no tapb
> vethb-peer
ip link set vetha-peer up
ip link set vethb-peer up
ip link set bra up
ip link set brb up
ip netns add a
ip netns add b
ip link set vetha netns a
ip link set vethb netns b
ip netns exec a ip address add 10.0.0.3/24 dev vetha
ip netns exec b ip address add 10.0.0.4/24 dev vethb
ip netns exec a ip link set vetha up
ip netns exec b ip link set vethb up
ip netns exec a arping -I vetha 10.0.0.4
ARPING 10.0.0.4 from 10.0.0.3 vetha
^CSent 2 probes (2 broadcast(s))
Received 0 response(s)
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Hong Zhiguo <honkiko@gmail.com>
Cc: Rami Rosen <ramirose@gmail.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Jesse Gross <jesse@nicira.com>
Cc: dev@openvswitch.org
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Time in range will fail safely if we move to a different cpu with an
extremely large clock skew.
Add time_in_range64() and convert lls to use it.
changelog:
v2
- fixed double call to sched_clock in can_poll_ll
- fixed checkpatchisms
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not nice when netdev is created right after module load and with
some implicit name. So rather change nlmon to use standard rtnl link API.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 38ae92d "fec: Add support for reading
RMON registers" causes the imx6Q to crash.
This fixes it by only enabling the RMON registers, the
registers are already cleared by the MAC being reset.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some Icera based Huawei modems handled by this driver are not
completely CDC ECM compliant, using the same USB interface for both
control and data. The CDC functional descriptors include a Union
naming this interface as both master and slave, so it is supportable
by relaxing the descriptor parsing in case these interfaces are
identical.
This has been tested on a Huawei K3806 and verified to add support
for that device.
Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx_bytes field was not being updated so the
network card statistics showed 0.0B transmitted.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a regression introduced by
commit fd58156e45 (IPIP: Use ip-tunneling code.)
Similar to GRE tunnel, previously we only check the parameters
for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the
check is moved for all commands.
So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL.
Also, the check for i_key, o_key etc. is suspicious too,
which did not exist before, reset them before passing
to ip_tunnel_ioctl().
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing .owner of struct pppox_proto. This prevents the
module from being removed from underneath its users.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert one printk to pr_<level>.
Add a missing newline in several places to avoid message interleaving,
coalesce formats, reflow modified lines to 80 columns.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the fib_update_nh_saddrs() declaration from
include/net/ip_fib.h, as the fib_update_nh_saddrs() method was removed in
coomit 436c3b6 ("ipv4: Invalidate nexthop cache nh_saddr more correctly").
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds the USB device ID (0x12ab) to the ipheth network-over-USB-tethering
driver for iOS devices. Applied and tested against mainline tag v3.10
(as well as 3.8.x and 3.6.y kernel for Raspbian on Raspberry pi)
Signed-off-by: Aaron Marburg <amarburg@notetofutureself.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header file checksum.h is missing proper defines that prevents
it from double inclusion.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TPACKET_V3 test code consists of a lot of unecessary macro
wrappers that rather obfuscate what members are accessed in what
way. So get rid of them and make the code more readable. Also
credit Chetan for providing tpacket_v3 example code. Furthermore,
get rid of private offset usage, as we do not need it here.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the patch "bnx2x: remove zeroing of dump data buffer" showed,
it is too easy implement .get_dump_data incorrectly in a driver.
Let's make sure drivers cannot get confused by userspace requesting
a too big dump.
Also WARN if the driver sets dump->len to something weird and make
sure the length reported to userspace is the actual length of data
copied to userspace.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x did not set dump->version in its .get_dump_flag() method.
Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice
number (0x50acff01 currently), but at least it's something
deterministic.
dump->flag should report the value previously set using ethtool -W.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x interprets the dump flag as an index of a register preset.
It is important to validate the index to avoid out of bounds
memory accesses.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to initialize the dump data with zeros.
data is allocated with vzalloc, so it's already zero-filled.
More importantly, the memset is harmful, because dump->len (the length
requested by userspace) can be bigger than the allocated buffer (whose
size is determined by asking the driver's .get_dump_flag method).
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After having reworked the debugging framework, Neil and Vlad agreed to
get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons:
We can use systemtap scripts to investigate these things, we now have
pr_debug() helpers that make life easier, and if we really need anything
else besides those tools, we will be forced to come up with something
better than we have there. Therefore, get rid of this ifdef debugging
code entirely for now.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware patch for the Saturn PHY fixes a bug, but is not absolutely
essential. And its licence is unclear, so it is not included in all
distributions. Just log an error message and continue if it is missing
or invalid.
References: http://bugs.debian.org/712674
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Jose Andres Arias Velichko <Andres.Arias@PaisLinux.net> (against 3.2)
Signed-off-by: David S. Miller <davem@davemloft.net>
Another QMI-speaking device by ZTE, re-branded by ONDA!
I'm connected ovr this device's QMI interface right now, so I can say I tested
it! :)
Note: a follow-up patch was posted to the linux-usb mailing list, to prevent
the option driver from binding to the device's QMI interface, making it
unusable.
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
vti module allocates dev->tstats twice: in vti_fb_tunnel_init()
and in vti_tunnel_init(), this lead to a memory leak of
dev->tstats.
Just remove the duplicated operations in vti_fb_tunnel_init().
(candidate for -stable)
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Saurabh Mohan <saurabh.mohan@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When testing GRE tunnel, I got:
# ip tunnel show
get tunnel gre0 failed: Invalid argument
get tunnel gre1 failed: Invalid argument
This is a regression introduced by commit c544193214
("GRE: Refactor GRE tunneling code.") because previously we
only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL,
after that commit, the check is moved for all commands.
So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL.
After this patch I got:
# ip tunnel show
gre0: gre/ip remote any local any ttl inherit nopmtudisc
gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should get rid of all own SCTP debug printk macros and use the ones
that the kernel offers anyway instead. This makes the code more readable
and conform to the kernel code, and offers all the features of dynamic
debbuging that pr_debug() et al has, such as only turning on/off portions
of debug messages at runtime through debugfs. The runtime cost of having
CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing,
is negligible [1]. If kernel debugging is completly turned off, then these
statements will also compile into "empty" functions.
While we're at it, we also need to change the Kconfig option as it /now/
only refers to the ifdef'ed code portions in outqueue.c that enable further
debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code
was enabled with this Kconfig option and has now been removed, we
transform those code parts into WARNs resp. where appropriate BUG_ONs so
that those bugs can be more easily detected as probably not many people
have SCTP debugging permanently turned on.
To turn on all SCTP debugging, the following steps are needed:
# mount -t debugfs none /sys/kernel/debug
# echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control
This can be done more fine-grained on a per file, per line basis and others
as described in [2].
[1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf
[2] Documentation/dynamic-debug-howto.txt
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to avoid making code that deals with printing both, IPv4 and
IPv6 addresses, unnecessary complicated as for example ...
if (sa.sa_family == AF_INET6)
printk("... %pI6 ...", ..sin6_addr);
else
printk("... %pI4 ...", ..sin_addr.s_addr);
... it would be better to introduce a format specifier that can deal
with those kind of situations internally; just as we have a "struct
sockaddr" for generic mapping into "struct sockaddr_in" or "struct
sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could
reduce the above statement into something like:
printk("... %pIS ..", &sockaddr);
In case our pointer is NULL, pointer() then deals with that already at
an earlier point in time internally. While we're at it, support for both
%piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free.
Additionally to that, postfix specifiers 'p', 'f' and 's' are supported
as suggested and initially implemented in 2009 by Joe Perches [1].
Handling of those additional specifiers orientate on the initial RFC that
was proposed. Also we support IPv6 compressed format specified by 'c' and
various other IPv4 extensions as stated in the documentation part.
Likely, there are many other areas than just SCTP in the kernel to make
use of this extension as well.
[1] http://patchwork.ozlabs.org/patch/31480/
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
CC: Joe Perches <joe@perches.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
Here is current updates for vxlan in net-next. It includes Mike's changes
to handle multiple destinations and lots of little cosmetic stuff.
This is a fresh vxlan-next repository which was forked from net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
