Pull ARM fixes from Russell King:
"Most of this update are fixes primarily discovered from testing on the
older StrongARM 1110 and PXA systems, as a result of recent interest
from several people in these platforms:
- Locomo interrupt handling incorrectly stores the handler data in
the chip's private data slot: when Locomo is combined with an
interrupt controller who's chip uses the chip private data, this
leads to an oops.
- SA1111 was missing a call to clk_disable() to clean up after a
failed probe.
- SA1111 and PCMCIA suspend/resume was broken:
The PCMCIA "ds" layer was using the legacy bus suspend/resume
methods, which the core PM code is no longer calling as a result of
device_pm_check_callbacks() introduced in commit aa8e54b559
("PM / sleep: Go direct_complete if driver has no callbacks").
SA1111 was broken due to changes to PCMCIA which makes PCMCIA
suspend itself later than the SA1111 code expects, and resume
before the SA1111 code has initialised access to the pcmcia
sub-device.
- the default SA1111 interrupt mask polarity got messed up when it
was converted to use a dynamic interrupt base number for its
interrupts.
- fix platform_get_irq() error code propagation, which was causing
problems on platforms where the interrupt may not be available at
probe time in DT setups.
- fix the lack of clock to PCMCIA code on PXA platforms, which was
omitted in conversions of PXA to CCF.
- fix an oops in the PXA PCMCIA code caused by a previous commit not
realising that Lubbock is different from the rest of the PXA PCMCIA
drivers.
- ensure that SA1111 low-level PCMCIA drivers propagate their error
codes to the main probe function, rather than the driver silently
accepting a failure.
- fix the sa11xx debugfs reporting of timing information, which
always indicated zero due to the clock being a factor of 1000 out.
- fix the polarity of the status change signal reported from the
sockets.
Lastly, one ARM specific commit from Stefan Agner fixing the LPAE
cache attributes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: pxa/lubbock: add pcmcia clock
ARM: locomo: fix locomo irq handling
ARM: 8612/1: LPAE: initialize cache policy correctly
ARM: sa1111: fix missing clk_disable()
ARM: sa1111: fix pcmcia suspend/resume
ARM: sa1111: fix pcmcia interrupt mask polarity
ARM: sa1111: fix error code propagation in sa1111_probe()
pcmcia: lubbock: fix sockets configuration
pcmcia: sa1111: fix propagation of lowlevel board init return code
pcmcia: soc_common: fix SS_STSCHG polarity
pcmcia: sa11xx_base: add units to the timing information
pcmcia: sa11xx_base: fix reporting of timing information
pcmcia: ds: fix suspend/resume
This ensures that do_mmap() won't implicitly make AIO memory mappings
executable if the READ_IMPLIES_EXEC personality flag is set. Such
behavior is problematic because the security_mmap_file LSM hook doesn't
catch this case, potentially permitting an attacker to bypass a W^X
policy enforced by SELinux.
I have tested the patch on my machine.
To test the behavior, compile and run this:
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/personality.h>
#include <linux/aio_abi.h>
#include <err.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/syscall.h>
int main(void) {
personality(READ_IMPLIES_EXEC);
aio_context_t ctx = 0;
if (syscall(__NR_io_setup, 1, &ctx))
err(1, "io_setup");
char cmd[1000];
sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'",
(int)getpid());
system(cmd);
return 0;
}
In the output, "rw-s" is good, "rwxs" is bad.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Windows because it uses RTC periodic interrupts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJX2xpHAAoJEL/70l94x66D9NsIAIw+9oRA86qjehVnguV3fRKA
ITZ4OGFDiXPWuxqDaw8mHHXr0RYx8KcMTzfFNbV+YL5U0cq9xYzdaNhchKPpyF+3
7H5wL8Ku9wkYZ930kdCf5Q+LNCfg8d/wKlibPEbX0MDx4jL99kkcxLzEkmIRqFlq
bpXaQe/KR1xCWR6gI/a6aRJWLfGuFMV82YSnk/dCSjwotbAwjJUSt+IPhLwhx28o
7ddcxW3CxQqelJorcu2lvRiGnCvEzDhIdOvHJqibCjo3uzqbcI4PA2gs3rozbs9s
VMEzqZpNgK0XsyKyccSw75npViIHYPkjMzxoyHMDhgiP3eIwp/tJquxAfLjK4WE=
=h4P4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"One fix for an x86 regression in VM migration, mostly visible with
Windows because it uses RTC periodic interrupts"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: correctly reset dest_map->vector when restoring LAPIC state
Kirill A Shutemov reports that the kernel doesn't try to cap dest_count
in any way, and uses the number to allocate kernel memory. This causes
high order allocation warnings in the kernel log if someone passes in a
big enough value. We should clamp the allocation at PAGE_SIZE to avoid
stressing the VM.
The two existing users of the dedupe ioctl never send more than 120
requests, so we can safely clamp dest_range at PAGE_SIZE, because with
4k pages we can handle up to 127 dedupe candidates. Given the max
extent length of 16MB, we can end up doing 2GB of IO which is plenty.
[ Note: the "offsetof()" can't overflow, because 'count' is just a
16-bit integer. That's not obvious in the limited context of the
patch, so I'm noting it here because it made me go look. - Linus ]
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the VFS functions in the dedupe ioctl path return int status, so
the ioctl handler ought to as well.
Found by Coverity, CID 1350952.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A set of fixes for the current series in the realm of block.
Like the previous pull request, the meat of it are fixes for the nvme
fabrics/target code. Outside of that, just one fix from Gabriel for
not doing a queue suspend if we didn't get the admin queue setup in
the first place"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-rdma: add back dependency on CONFIG_BLOCK
nvme-rdma: fix null pointer dereference on req->mr
nvme-rdma: use ib_client API to detect device removal
nvme-rdma: add DELETING queue flag
nvme/quirk: Add a delay before checking device ready for memblaze device
nvme: Don't suspend admin queue that wasn't created
nvme-rdma: destroy nvme queue rdma resources on connect failure
nvme_rdma: keep a ref on the ctrl during delete/flush
iw_cxgb4: block module unload until all ep resources are released
iw_cxgb4: call dev_put() on l2t allocation failure
get_user_ex(x, ptr) should zero x on failure. It's not a lot of a leak
(at most we are leaking uninitialized 64bit value off the kernel stack,
and in a fairly constrained situation, at that), but the fix is trivial,
so...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ This sat in different branch from the uaccess fixes since mid-August ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When userspace sends KVM_SET_LAPIC, KVM schedules a check between
the vCPU's IRR and ISR and the IOAPIC redirection table, in order
to re-establish the IOAPIC's dest_map (the list of CPUs servicing
the real-time clock interrupt with the corresponding vectors).
However, __rtc_irq_eoi_tracking_restore_one was forgetting to
set dest_map->vectors. Because of this, the IOAPIC did not process
the real-time clock interrupt EOI, ioapic->rtc_status.pending_eoi
got stuck at a non-zero value, and further RTC interrupts were
reported to userspace as coalesced.
Fixes: 9e4aabe2bb
Fixes: 4d99ba898d
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: David Gilbert <dgilbert@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enumeration
Mark Haswell Power Control Unit as having non-compliant BARs (Bjorn Helgaas)
Power management
Fix bridge_d3 update on device removal (Lukas Wunner)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PQml
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are two changes for v4.8. The first fixes a "[Firmware Bug]: reg
0x10: invalid BAR (can't size)" warning on Haswell, and the second
fixes a problem in some new runtime suspend functionality we merged
for v4.8. Summary:
Enumeration:
Mark Haswell Power Control Unit as having non-compliant BARs (Bjorn Helgaas)
Power management:
Fix bridge_d3 update on device removal (Lukas Wunner)"
* tag 'pci-v4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix bridge_d3 update on device removal
PCI: Mark Haswell Power Control Unit as having non-compliant BARs
Pull uaccess fixes from Al Viro:
"Fixes for broken uaccess primitives - mostly lack of proper zeroing
in copy_from_user()/get_user()/__get_user(), but for several
architectures there's more (broken clear_user() on frv and
strncpy_from_user() on hexagon)"
* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
avr32: fix copy_from_user()
microblaze: fix __get_user()
microblaze: fix copy_from_user()
m32r: fix __get_user()
blackfin: fix copy_from_user()
sparc32: fix copy_from_user()
sh: fix copy_from_user()
sh64: failing __get_user() should zero
score: fix copy_from_user() and friends
score: fix __get_user/get_user
s390: get_user() should zero on failure
ppc32: fix copy_from_user()
parisc: fix copy_from_user()
openrisc: fix copy_from_user()
nios2: fix __get_user()
nios2: copy_from_user() should zero the tail of destination
mn10300: copy_from_user() should zero on access_ok() failure...
mn10300: failing __get_user() and get_user() should zero
mips: copy_from_user() must zero the destination on access_ok() failure
ARC: uaccess: get_user to zero out dest in cause of fault
...
Commit 88e957d6e4 ("xen: introduce xen_vcpu_id mapping") broke SMP
ARM guests on Xen. When FIFO-based event channels are in use (this is
the default), evtchn_fifo_alloc_control_block() is called on
CPU_UP_PREPARE event and this happens before we set up xen_vcpu_id
mapping in xen_starting_cpu. Temporary fix the issue by setting direct
Linux CPU id <-> Xen vCPU id mapping for all possible CPUs at boot. We
don't currently support kexec/kdump on Xen/ARM so these ids always
match.
In future, we have several ways to solve the issue, e.g.:
- Eliminate all hypercalls from CPU_UP_PREPARE, do them from the
starting CPU. This can probably be done for both x86 and ARM and, if
done, will allow us to get Xen's idea of vCPU id from CPUID/MPIDR on
the starting CPU directly, no messing with ACPI/device tree
required.
- Save vCPU id information from ACPI/device tree on ARM and use it to
initialize xen_vcpu_id mapping. This is the same trick we currently
do on x86.
Reported-by: Julien Grall <julien.grall@arm.com>
Tested-by: Wei Chen <Wei.Chen@arm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler. Left that way,
zeroing added in inline wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* should zero on any failure
* __get_user() should use __copy_from_user(), not copy_from_user()
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
should clear on access_ok() failures. Also remove the useless
range truncation logics.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... that should zero on faults. Also remove the <censored> helpful
logics wrt range truncation copied from ppc32. Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) should not leave crap on fault
b) should _not_ require access_ok() in any cases.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).
Cc: stable@vger.kernel.org
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It should check access_ok(). Otherwise a bunch of places turn into
trivially exploitable rootholes.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.
Cc: stable@vger.kernel.org
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the
port itself and its children satisfy a number of conditions. Once a child
is removed, we recheck those conditions in case the removed device was
blocking the port from suspending.
The rechecking needs to happen *after* the device has been removed from the
bus it resides on. Otherwise when walking the port's subordinate bus in
pci_bridge_d3_update(), the device being removed would erroneously still be
taken into account.
However the device is removed from the bus_list in pci_destroy_dev() and we
currently recheck *before* that. Fix it.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <mika.westerberg@linux.intel.com>
Pull x86 fixes from Ingo Molnar:
"Three fixes:
- AMD microcode loading fix with randomization
- an lguest tooling fix
- and an APIC enumeration boundary condition fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix num_processors value in case of failure
tools/lguest: Don't bork the terminal in case of wrong args
x86/microcode/AMD: Fix load of builtin microcode with randomized memory
Pull scheduler fix from Ingo Molnar:
"A try_to_wake_up() memory ordering race fix causing a busy-loop in
ttwu()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix a race between try_to_wake_up() and a woken up task
Pull perf fixes from Ingo Molnar:
"This contains:
- a set of fixes found by directed-random perf fuzzing efforts by
Vince Weaver, Alexander Shishkin and Peter Zijlstra
- a cqm driver crash fix
- an AMD uncore driver use after free fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix PEBSv3 record drain
perf/x86/intel/bts: Kill a silly warning
perf/x86/intel/bts: Fix BTS PMI detection
perf/x86/intel/bts: Fix confused ordering of PMU callbacks
perf/core: Fix aux_mmap_count vs aux_refcount order
perf/core: Fix a race between mmap_close() and set_output() of AUX events
perf/x86/amd/uncore: Prevent use after free
perf/x86/intel/cqm: Check cqm/mbm enabled state in event init
perf/core: Remove WARN from perf_event_read()
Pull locking fix from Ingo Molnar:
"Another lockless_dereference() Sparse fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/barriers: Don't use sizeof(void) in lockless_dereference()
Pull EFI fixes from Ingo Molnar:
"This contains a Xen fix, an arm64 fix and a race condition /
robustization set of fixes related to ExitBootServices() usage and
boundary conditions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Use efi_exit_boot_services()
efi/libstub: Use efi_exit_boot_services() in FDT
efi/libstub: Introduce ExitBootServices helper
efi/libstub: Allocate headspace in efi_get_memory_map()
efi: Fix handling error value in fdt_find_uefi_params
efi: Make for_each_efi_memory_desc_in_map() cope with running on Xen
Pull MD fixes from Shaohua Li:
"A few bug fixes for MD:
- Guoqing fixed a bug compiling md-cluster in kernel
- I fixed a potential deadlock in raid5-cache superblock write, a
hang in raid5 reshape resume and a race condition introduced in
rc4"
* tag 'md/4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: fix a small race condition
md-cluster: make md-cluster also can work when compiled into kernel
raid5: guarantee enough stripes to avoid reshape hang
raid5-cache: fix a deadlock in superblock write
Pull crypto bugfix from Herbert Xu:
"Fix a bug in the cryptd code that may lead to crashes"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cryptd - initialize child shash_desc on import
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=C0t1
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some small fixes for the new sunxi clk driver introduced this merge
window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: Fix wrong reset register offsets
clk: sunxi-ng: nk: Make ccu_nk_find_best static
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
