If buffer size is zero, return the size of layout vxattr. If buffer
size is not zero, check if it is large enough for layout vxattr.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
send_mds_reconnect() may call discard_cap_releases() after all
release messages have been dropped by cleanup_cap_releases()
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When there is no more data, ceph_msg_data_{pages,pagelist}_advance()
should not move on to the next page.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
When adjusting caps client wants, MDS does not record caps that are
not allowed. For non-auth MDS, it does not record WR caps. So when
a MDS reply changes a non-auth cap to auth cap, client needs to set
cap's mds_wanted according to the reply.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
flock and posix lock should use fl->fl_file instead of process ID
as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner
is usually equal to fl->fl_file, but it also can be a customized
value). The process ID of who holds the lock is just for F_GETLK
fcntl(2).
The fix is rename the 'pid' fields of struct ceph_mds_request_args
and struct ceph_filelock to 'owner', rename 'pid_namespace' fields
to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages.
We also set the most significant bit of the 'owner' field. MDS can
use that bit to distinguish between old and new clients.
The MDS counterpart of this patch modifies the flock code to not
take the 'pid_namespace' into consideration when checking conflict
locks.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
VFS does not directly pass flock's operation code to filesystem's
flock callback. It translates the operation code to the form how
posix lock's parameters are presented.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
handle following sequence of events:
- client releases a inode with i_max_size > 0. The release message
is queued. (is not sent to the auth MDS)
- a 'lookup' request reply from non-auth MDS returns the same inode.
- client opens the inode in write mode. The version of inode trace
in 'open' request reply is equal to the cached inode's version.
- client requests new max size. The MDS ignores the request because
it does not affect client's write range
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Only auth MDS can issue write caps to clients, so don't consider
write caps registered with non-auth MDS as valid.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Use the newly introduced LOOKUPNAME MDS request to connect child
inode to its parent directory.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field
of struct ceph_nfs_confh. This is wrong, it should return dentry that
corresponds to the 'parent_ino' field.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way.
So __cfh_to_dentry() is redundant.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The object store limit needs to be updated after writing,
and this can be done provided the corresponding object has already
been initialized. Current object initialization is done asynchrously,
which introduce a race if a file is opened, then immediately followed
by a writing, the initialization may have not completed, the code will
reach the ASSERT in fscache_submit_exclusive_op() to cause kernel
bug.
Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Synchronize object->store_limit[_l] with new inode->i_size after file writing.
Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Add an interface to explicitly synchronize object->store_limit[_l]
with inode->i_size
Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
This is racy--we do not know whather d_parent has changed out from
underneath us because i_mutex is not held on the source inode's directory.
Also, taking this reference is useless.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true. Separate out the ref cleanup and make the debugs dump behave when
it is NULL.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
The fsync(dirfd) only covers namespace operations, not inode updates.
We do not need to cover setattr variants or O_TRUNC.
Reported-by: Al Viro <viro@xeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
This is just old_dir; no reason to abuse the dcache pointers.
Reported-by: Al Viro <viro.zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
If readdir 'frag' is adjusted, readdir 'offset' should be reset.
Otherwise some dentries may be lost when readdir and fragmenting
directory happen at the some.
Another way to fix this issue is let MDS adjust readdir 'frag'.
The code that handles MDS reply reset the readdir 'offset' if
the readdir reply is different than the requested one.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
When changing readdir postion, fi->next_offset should be set to 0
if the new postion is not in the first dirfrag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Comparing offset with inode->i_sb->s_maxbytes doesn't make sense for
directory. For a fragmented directory, offset (frag_t, off) can be
larger than inode->i_sb->s_maxbytes.
At the very beginning of ceph_dir_llseek(), local variable old_offset
is initialized to parameter offset. This doesn't make sense neither.
Old_offset should be ceph_make_fpos(fi->frag, fi->next_offset).
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In an effort to reduce fragmentation, prefix every rbd write with
a CEPH_OSD_OP_SETALLOCHINT osd op with an expected_write_size value set
to the object size (1 << order). Backwards compatibility is taken care
of on the libceph/osd side.
"The CEPH_OSD_OP_SETALLOCHINT hint is durable, in that it's enough to
do it once. The reason every rbd write is prefixed is that rbd doesn't
explicitly create objects and relies on writes creating them
implicitly, so there is no place to stick a single hint op into. To
get around that we decided to prefix every rbd write with a hint (just
like write and setattr ops, hint op will create an object implicitly if
it doesn't exist)."
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In preparation for prefixing rbd writes with an allocation hint
introduce a num_ops parameter for rbd_osd_req_create(). The rationale
is that not every write request is a write op that needs to be prefixed
(e.g. watch op), so the num_ops logic needs to be in the callers.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Our longest osd request now contains 3 ops: copyup+hint+write.
Also, CEPH_OSD_MAX_OP value in a BUG_ON in rbd_osd_req_callback() was
hard-coded to 2. Fix it, and switch to rbd_assert while at it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
This is primarily for rbd's benefit and is supposed to combat
fragmentation:
"... knowing that rbd images have a 4m size, librbd can pass a hint
that will let the osd do the xfs allocation size ioctl on new files so
that they are allocated in 1m or 4m chunks. We've seen cases where
users with rbd workloads have very high levels of fragmentation in xfs
and this would mitigate that and probably have a pretty nice
performance benefit."
SETALLOCHINT is considered advisory, so our backwards compatibility
mechanism here is to set FAILOK flag for all SETALLOCHINT ops.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Encode ceph_osd_op::flags field so that it gets sent over the wire.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Doing rbd_obj_request_put() in rbd_img_request_fill() error paths is
not only insufficient, but also triggers an rbd_assert() in
rbd_obj_request_destroy():
Assertion failure in rbd_obj_request_destroy() at line 1867:
rbd_assert(obj_request->img_request == NULL);
rbd_img_obj_request_add() adds obj_requests to the img_request, the
opposite is rbd_img_obj_request_del(). Use it.
Fixes: http://tracker.ceph.com/issues/7327
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Commit 03507db631 ("rbd: fix buffer size for writes to images with
snapshots") moved the call to rbd_img_obj_request_add() up, making the
out_partial label bogus. Remove it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
With the addition of erasure coding support in the future, scratch
variable-length array in crush_do_rule_ary() is going to grow to at
least 200 bytes on average, on top of another 128 bytes consumed by
rawosd/osd arrays in the call chain. Replace it with a buffer inside
struct osdmap and a mutex. This shouldn't result in any contention,
because all osd requests were already serialized by request_mutex at
that point; the only unlocked caller was ceph_ioctl_get_dataloc().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Pull vfs fixes from Al Viro:
"Switch mnt_hash to hlist, turning the races between __lookup_mnt() and
hash modifications into false negatives from __lookup_mnt() (instead
of hangs)"
On the false negatives from __lookup_mnt():
"The *only* thing we care about is not getting stuck in __lookup_mnt().
If it misses an entry because something in front of it just got moved
around, etc, we are fine. We'll notice that mount_lock mismatch and
that'll be it"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch mnt_hash to hlist
don't bother with propagate_mnt() unless the target is shared
keep shadowed vfsmounts together
resizable namespace.c hashes
I am the new kernel tree Documentation maintainer (except for parts that
are handled by other people, of course).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull input updates from Dmitry Torokhov:
"Some more updates for the input subsystem.
You will get a fix for race in mousedev that has been causing quite a
few oopses lately and a small fixup for force feedback support in
evdev"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mousedev - fix race when creating mixed device
Input: don't modify the id of ioctl-provided ff effect on upload failure
It its possible to configure your PAM stack to refuse login if audit
messages (about the login) were unable to be sent. This is common in
many distros and thus normal configuration of many containers. The PAM
modules determine if audit is enabled/disabled in the kernel based on
the return value from sending an audit message on the netlink socket.
If userspace gets back ECONNREFUSED it believes audit is disabled in the
kernel. If it gets any other error else it refuses to let the login
proceed.
Just about ever since the introduction of namespaces the kernel audit
subsystem has returned EPERM if the task sending a message was not in
the init user or pid namespace. So many forms of containers have never
worked if audit was enabled in the kernel.
BUT if the container was not in net_init then the kernel network code
would send ECONNREFUSED (instead of the audit code sending EPERM). Thus
by pure accident/dumb luck/bug if an admin configured the PAM stack to
reject all logins that didn't talk to audit, but then ran the login
untility in the non-init_net namespace, it would work!! Clearly this was
a bug, but it is a bug some people expected.
With the introduction of network namespace support in 3.14-rc1 the two
bugs stopped cancelling each other out. Now, containers in the
non-init_net namespace refused to let users log in (just like PAM was
configfured!) Obviously some people were not happy that what used to let
users log in, now didn't!
This fix is kinda hacky. We return ECONNREFUSED for all non-init
relevant namespaces. That means that not only will the old broken
non-init_net setups continue to work, now the broken non-init_pid or
non-init_user setups will 'work'. They don't really work, since audit
isn't logging things. But it's what most users want.
In 3.15 we should have patches to support not only the non-init_net
(3.14) namespace but also the non-init_pid and non-init_user namespace.
So all will be right in the world. This just opens the doors wide open
on 3.14 and hopefully makes users happy, if not the audit system...
Reported-by: Andre Tomt <andre@tomt.net>
Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fixes RCU bug - walking through hlist is safe in face of element moves,
since it's self-terminating. Cyclic lists are not - if we end up jumping
to another hash chain, we'll loop infinitely without ever hitting the
original list head.
[fix for dumb braino folded]
Spotted by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the dest_mnt is not shared, propagate_mnt() does nothing -
there's no mounts to propagate to and thus no copies to create.
Might as well don't bother calling it in that case.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* switch allocation to alloc_large_system_hash()
* make sizes overridable by boot parameters (mhash_entries=, mphash_entries=)
* switch mountpoint_hashtable from list_head to hlist_head
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull timer fix from Ingo Molnar:
"A late breaking fix from John. (The bug fixed has a hard lockup
potential, but that was not observed, warnings were)"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Revert to calling clock_was_set_delayed() while in irq context
Pull Ceph fix from Sage Weil:
"This drops a bad assert that a few users have been hitting but we've
only recently been able to track down"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: drop an unsafe assertion
We should not be using static variable mousedev_mix in methods that can be
called before that singleton gets assigned. While at it let's add open and
close methods to mousedev structure so that we do not need to test if we
are dealing with multiplexor or normal device and simply call appropriate
method directly.
This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551
Reported-by: GiulioDP <depasquale.giulio@gmail.com>
Tested-by: GiulioDP <depasquale.giulio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If a new (id == -1) ff effect was uploaded from userspace,
ff-core.c::input_ff_upload() will have assigned a positive number to the
new effect id. Currently, evdev.c::evdev_do_ioctl() will save this new id
to userspace, regardless of whether the upload succeeded or not.
On upload failure, this can be confusing because the dev->ff->effects[]
array will not contain an element at the index of that new effect id.
This patch fixes this by leaving the id unchanged after upload fails.
Note: Unfortunately applications should still expect changed effect id for
quite some time.
This has been discussed on:
http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html
("ff-core effect id handling in case of a failed effect upload")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Olivier Bonvalet reported having repeated crashes due to a failed
assertion he was hitting in rbd_img_obj_callback():
Assertion failure in rbd_img_obj_callback() at line 2165:
rbd_assert(which >= img_request->next_completion);
With a lot of help from Olivier with reproducing the problem
we were able to determine the object and image requests had
already been completed (and often freed) at the point the
assertion failed.
There was a great deal of discussion on the ceph-devel mailing list
about this. The problem only arose when there were two (or more)
object requests in an image request, and the problem was always
seen when the second request was being completed.
The problem is due to a race in the window between setting the
"done" flag on an object request and checking the image request's
next completion value. When the first object request completes, it
checks to see if its successor request is marked "done", and if
so, that request is also completed. In the process, the image
request's next_completion value is updated to reflect that both
the first and second requests are completed. By the time the
second request is able to check the next_completion value, it
has been set to a value *greater* than its own "which" value,
which caused an assertion to fail.
Fix this problem by skipping over any completion processing
unless the completing object request is the next one expected.
Test only for inequality (not >=), and eliminate the bad
assertion.
Tested-by: Olivier Bonvalet <ob@daevel.fr>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Pull networking fixes from David Miller:
1) We've discovered a common error in several networking drivers, they
put VLAN offload features into ->vlan_features, which would suggest
that they support offloading 2 or more levels of VLAN encapsulation.
Not only do these devices not do that, but we don't have the
infrastructure yet to handle that at all.
Fixes from Vlad Yasevich.
2) Fix tcpdump crash with bridging and vlans, also from Vlad.
3) Some MAINTAINERS updates for random32 and bonding.
4) Fix late reseeds of prandom generator, from Sasha Levin.
5) Bridge doesn't handle stacked vlans properly, fix from Toshiaki
Makita.
6) Fix deadlock in openvswitch, from Flavio Leitner.
7) get_timewait4_sock() doesn't report delay times correctly, fix from
Eric Dumazet.
8) Duplicate address detection and addrconf verification need to run in
contexts where RTNL can be obtained. Move them to run from a
workqueue. From Hannes Frederic Sowa.
9) Fix route refcount leaking in ip tunnels, from Pravin B Shelar.
10) Don't return -EINTR from non-blocking recvmsg() on AF_UNIX sockets,
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
vlan: Warn the user if lowerdev has bad vlan features.
veth: Turn off vlan rx acceleration in vlan_features
ifb: Remove vlan acceleration from vlan_features
qlge: Do not propaged vlan tag offloads to vlans
bridge: Fix crash with vlan filtering and tcpdump
net: Account for all vlan headers in skb_mac_gso_segment
MAINTAINERS: bonding: change email address
MAINTAINERS: bonding: change email address
ipv6: move DAD and addrconf_verify processing to workqueue
tcp: fix get_timewait4_sock() delay computation on 64bit
openvswitch: fix a possible deadlock and lockdep warning
bridge: Fix handling stacked vlan tags
bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled
vhost: validate vhost_get_vq_desc return value
vhost: fix total length when packets are too short
random32: avoid attempt to late reseed if in the middle of seeding
random32: assign to network folks in MAINTAINERS
net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset
core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
vlan: Set hard_header_len according to available acceleration
...
