Rename some of the local vars and tidy up this function to fix to
fix a couple > 80 char line issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename some of the local vars and tidy up this function to fix to
fix a couple > 80 char line issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename some of the local vars and tidy up this function to fix to
fix a couple > 80 char line issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enum ni_gpct_variant is used to handle hardware variations in the
gpct timers handled by this driver. This enum is defined as:
enum ni_gpct_variant {
ni_gpct_variant_e_series,
ni_gpct_variant_m_series,
ni_gpct_variant_660x
};
For all the switch statements where all three enum values are handled,
remove the unreachable BUG(). Move the default case so it is handled
the same as ni_gpct_variant_e_series.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the whitespace in some of the function declarations to avoid
the ugly line breaks and fix a couple checkpatch.pl issues:
WARNING: line over 80 characters
WARNING: Unnecessary space before function pointer arguments
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up some of the comments to fix some fo the the checkpatch.pl
warnings:
WARNING: line over 80 characters
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core expects the (*insn_read) operations to read insn->n
values and return the number of values read.
Fix this function to work line the core expects.
For aesthetics, factor out the code that reads the SM_Save_Reg.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this patch fixes some errors and warnings reported by checkpatch.pl
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary return at end of a void function.
Part of the eudyptula challenge: http://eudyptula-challenge.org/
Signed-off-by: Mostyn Bramley-Moore <mbmcode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleans up the style, error handling, and string handling in the sysfs
functions recently added to visorchipset:
- Use of sscanf() was changed to type-appropriate kstrto*() functions
- error handling was simplified
- the error return value of visorchannel_write() was corrected
- switch use of driver-specific types to kernel types
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in gdm_usb.c:
ERROR: that open brace { should be on the previous line
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix sparse warnings:
drivers/staging/rtl8188eu/core/rtw_cmd.c:52:5: warning:
symbol '_rtw_enqueue_cmd' was not declared. Should it be static?
drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1225:5: warning:
symbol 'wifirate2_ratetbl_inx' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:25:4: warning:
symbol 'ODM_GetRightChnlPlaceforIQK' was not declared. Should it be static?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:3109:5: warning:
symbol 'rtw_ioctl' was not declared. Should it be static?
Signed-off-by: Jeff Oczek <jeffoczek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
merge u32 flag into unsigned long Flags
Replacing fMP_DISCONNECTED with DEVICE_FLAGS_DISCONNECTED
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MP_IS_READY(fMP_DISCONNECTED) is used to block thread in vnt_tx_context
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a documentation file for all of the interfaces that were moved
to sysfs by the other patches in this set.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove remnant code left over from the diagdump proc entry.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the chipsetready proc entry to sysfs under a new directory guest. This
entry is used by Unisys application software on the guest to acknowledge
completion of specific events for integration purposes, but these
acknowledgements are not required for the guest to operate correctly.
The store function is simplified as well, to use scanf() instead of copying
the buffer and using strsep().
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The installer entry in /proc/visorchipset/installer was composed of three
separate fields as one entry. This patch removes the proc entry and associated
functions, and creates new fields with distinct entries under sysfs in the
visorchipset/install directory. The fields are:
textid: used to send the ID of a string that should be displayed on
s-Par's automatic installation progress screen. Setting this
field when not in installation mode (boottotool was set on
the previous guest boot) has no effect.
remaining_steps: used to set the value of the progress bar on the
s-Par automatic installation progress screen. This field has
no effect if not in installation mode.
error: used to send the ID of a string that should be displayed on
s-Par's automatic installation progress screen when an error
is encountered during installation. This field has no effect
if not in installation mode.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix spelling typos in comments and printk
within et131x.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added a missing "break" which forced the board to acquire 16
channels even when only 3 had been requested.
Thanks for Hartley Sweeten to spot this bug.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reported-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch errors:
"space required after that ','"
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the hardware is being initialized, the edge detection interrupts
are cleared and disabled. Also disable edge detection for all channels
at this time so they start off in a known state.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "edge detection interrupt" subdevice supports the
`INSN_CONFIG_CHANGE_NOTIFY` comedi instruction which is only supported
by one other driver. It is limited to the first 32 channels, but boards
supported by this driver support edge detection on all digital I/O,
digital input and digital output channels. The
`INSN_CONFIG_DIGITAL_TRIG` comedi instruction is more flexible as it
supports more than 32 channels (with multiple instructions). It can
also support level detection, but the hardware does not support that.
Add partial support for the `INSN_CONFIG_DIGITAL_TRIG` instruction, but
only for edge detection.
Since `INSN_CONFIG_CHANGE_NOTIFY` can only deal with 32 channels, make
it disable edge detection for any remaining channels.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code that updates the rising and falling edge detection
registers into new function `ni_65xx_update_edge_detection()`. This
updates the rising and falling edge detection registers for up to 32
channels starting at an arbitrary channel. Call it from the code that
handles the `INSN_CONFIG_CHANGE_NOTIFY` instruction, which is limited to
the first 32 channels.
(For the purposes of edge detection, the channels are in the natural
port order of the board, 8 channels per port. In practice, this is all
the digital I/O channels (if any), followed by all the digital input
channels (if any), followed by all the digital output channels (if any).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a function to return the total number of digital I/O, digital input,
and digital output ports on the board. Each port has 8 channels (bits).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove the
driver from the kernel. If someone wants to work on cleaning it up and
moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Angelo Arrifano <miknix@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove the
driver from the kernel. If someone wants to work on cleaning it up and
moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New functionality
* A new modifier to indicate that a rotation is relative to either
true or magnetic north. This is to be used by some magnetometers
that provide data in this way.
* hid magnetometer now supports output rotations from various variants on
North
* HMC5843 driver converted to regmap and reworked to allow easy support
of other similar devices. Support for HMC5983 added via both i2c and SPI.
* Rework of Exynos driver to simplify extension to support more devices.
* Addition of support for the Exynos3250 ADC (which requires an additional
clock) Support for quite a few more devices on its way.
Cleanups
* ad7997 - a number of cleanups and tweaks to how the events are controlled
to make it more intuitive.
* kxcjk - cleanups and minor fixes for this new driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=iOto
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.17d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle
New functionality
* A new modifier to indicate that a rotation is relative to either
true or magnetic north. This is to be used by some magnetometers
that provide data in this way.
* hid magnetometer now supports output rotations from various variants on
North
* HMC5843 driver converted to regmap and reworked to allow easy support
of other similar devices. Support for HMC5983 added via both i2c and SPI.
* Rework of Exynos driver to simplify extension to support more devices.
* Addition of support for the Exynos3250 ADC (which requires an additional
clock) Support for quite a few more devices on its way.
Cleanups
* ad7997 - a number of cleanups and tweaks to how the events are controlled
to make it more intuitive.
* kxcjk - cleanups and minor fixes for this new driver.
