Commit Graph

151570 Commits

Author SHA1 Message Date
Trent Piepho
eccd15aad7 V4L/DVB (11964): b2c2: Fix problems with frontend attachment
The frontend attachment code didn't handle cases where the frontend
partially failed to attach.  For instance, when the demod was attached
successfully but the tuner driver wasn't compiled or fails to init for some
reason.  In these cases we try to clean up the partial attachment and fail
instead of proceeding with a broken frontend.

If frontend registration fails, clean up with dvb_frontend_detach() rather
than just calling the frontend's main release method.  The former does some
additional stuff, like release an attached tuner and take care of putting
symbols when dynamic binding is used.

In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that
gets set before skystar2_rev23_attach() is called.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:40 -03:00
Jan Ceuleers
f6a061bb0f V4L/DVB (11962): dvb: Fix broken link in get_dvb_firmware for nxt2004 (A180)
Due to a reorganisation of AVermedia's websites, get_dvb_firmware
no longer works for nxt2004. Fix it.

Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:39 -03:00
Roel Kluin
76b0811645 V4L/DVB (11961): tvp514x: try_count off by one
With `while (try_count-- > 0)' try_count reaches -1 after the loop.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:39 -03:00
Lennart Poettering
bcd3e4b319 V4L/DVB (11960): v4l: generate KEY_CAMERA instead of BTN_0 key events on input devices
A bunch of V4L drivers generate BTN_0 instead of KEY_CAMERA key presses.

X11 is able to handle KEY_CAMERA automatically these days while BTN_0 is
not treated at all.  Thus it would be of big benefit if the camera drivers
would consistently generate KEY_CAMERA.  Some drivers (uvc) already do,
this patch updates the remaining drivers to do the same.

I only possess a limited set of webcams, so this isn't tested with all
cameras.  The patch is rather trivial and compile tested, so I'd say it's
still good enough to get merged.

Signed-off-by: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:38 -03:00
Alan Cox
6f4d72392d V4L/DVB (11959): se401: Fix unsafe use of sprintf with identical source/destination
Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13435

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:37 -03:00
Figo.zhang
5e2c217eee V4L/DVB (11958): usbvision-core.c: vfree does its own NULL check
vfree() does it's own NULL checking,so no need for check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:37 -03:00
Alexey Klimov
f1ca0adfcf V4L/DVB (11957): dsbr100: change radio->muted to radio->status, update suspend/resume
Patch renames radio->muted to radio->status, add defines for that
variable, and fixes suspend/resume procedure. Radio->status set to
STOPPED in usb_dsbr100_probe because of removing open call.
Also, patch increases driver version.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:36 -03:00
Alexey Klimov
917fab4f3e V4L/DVB (11956): dsbr100: no need to pass curfreq value to dsbr100_setfreq()
Small cleanup of dsbr100_setfreq(). No need to pass radio->curfreq value
to this function.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:36 -03:00
Alexey Klimov
a617e0e8c7 V4L/DVB (11955): dsbr100: remove usb_dsbr100_open/close calls
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:35 -03:00
Alexey Klimov
6f094eb9a8 V4L/DVB (11954): dsbr100: remove radio->users counter
Patch removes radio->users counter because it is not in use.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:34 -03:00
Figo.zhang
92051b285b V4L/DVB (11953): videobuf-dma-sg: return -ENOMEM if vmalloc fails
it is better return -ENOMEM than -EIO

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:34 -03:00
Andy Walls
8bb09db375 V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 H
This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog
TV capture from the tuner working properly as well.

DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of
Leadtek.  DVB-T 7 MHz has also been verified working with a change developed by
Terry to the tuner-xc2028.c driver.

Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided
the needed information and testing to get digital TV working for the Leadtek
DVR3100 H.

Reported-by: Terry Wu <terrywu2009@gmail.com>
Tested-by: Terry Wu <terrywu2009@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:33 -03:00
Andy Walls
9d5af86292 V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate card entries
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:33 -03:00
Laurent Pinchart
3b27740c7d V4L/DVB (11948): uvcvideo: Ignore non-UVC trailing interface descriptors.
Herton Ronaldo Krzesinski from Mandriva reported that one Bison Electronics
webcam exposes a non-UVC interface descriptor. Instead of failing completely,
ignore trailing non-UVC descriptors and move on.

Thanks to Herton for reporting the problem and submitting a patch proposal.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:32 -03:00
Laurent Pinchart
ca4a345685 V4L/DVB (11947): uvcvideo: Add support for FSC V30S webcams
The FSC WebCam V30S (18ec:3288) requires the MINMAX quirk. Add a corresponding
entry in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:31 -03:00
Laurent Pinchart
2d2bf2a3a6 V4L/DVB (11946): uvcvideo: Add support for Aveo Technology webcams
The Aveo Technology USB 2.0 Camera (1871:0306) requires the
PROBE_EXTRAFIELDS quirk. Add a corresponding entry in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:31 -03:00
Laurent Pinchart
23ff6043ad V4L/DVB (11945): uvcvideo: Don't accept to change the format when buffers are allocated.
Setting a new frame format or size will likely change the buffer size required
to store a complete video frame. To avoid a buffer overflow, don't allow
VIDIOC_S_FMT calls when video buffers are already allocated.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:30 -03:00
Laurent Pinchart
d732c44c1a V4L/DVB (11944): uvcvideo: Add generic control blacklist.
Another device (5986:0241) has been reported to advertise a UVC control it
does not support. Rework the control blacklist to match devices by their
VID:PID instead of trying to be clever about which controls might not be
supported properly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:29 -03:00
Erik Andrén
926b3b4122 V4L/DVB (11942): gspca - m5602-ov9650: Reorder quirk list and add A7V quirk
The quirk list has grown and was in need of sorting. This is now done. Add a new vflip quirk for the ASUS A7V while we're at it. Thanks to Carsten Menzel for reporting.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:29 -03:00
Erik Andrén
40a4f2fc65 V4L/DVB (11941): gspca - m5602-ov9650: Add vflip quirk for the ASUS A6VA
Add vflip quirk for the ASUS A6VA. Thanks to Salvo Di Rosa for reporting.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:28 -03:00
Erik Andrén
f02c3944c1 V4L/DVB (11940): gspca - m5602-s5k4aa: Add vflip quirk for the Lenovo Y300
The Lenovo Y300 has its sensor upside down. Quirk it to gain normal functionality.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:28 -03:00
Dmitri Belimov
6b6b75432c V4L/DVB (11938): big rework of TS for saa7134
1. Add start/stop TS function.
2. Move setup DMA of TS to DMA function.
3. Write support cupture via MMAP
4. Rework startup and finish process, remove simple FSM.

Tested-by: Hermann Pitton <hermann-pitton@arcor.de>
Tested-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:27 -03:00
FUJITA Tomonori
028bbfedcc V4L/DVB (11937): vino: replace dma_sync_single with dma_sync_single_for_cpu
This replaces dma_sync_single() with dma_sync_single_for_cpu() because
dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says:

/* Backwards compat, remove in 2.7.x */

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:26 -03:00
Randy Dunlap
ef5b5168e5 V4L/DVB (11936): Fix v4l2-device usage of i2c_unregister_device()
Fix v4l2-device usage of i2c_unregister_device() and handle the case of
CONFIG_I2C=m & CONFIG_MEDIA_VIDEO=y.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:26 -03:00
Dmitri Belimov
436ae1381e V4L/DVB (11934): Change order for FM tune
Change order data of buffer in FM simple_tune function. It is usefull for:

1. Set data of tuner with CP bit UP. 0xCE for MK5 or 0xC6 for MK3
2. When call simple_fm_tune, read this byte from config and overwrite
this byte in function simple_radio_bandswitch for set CP bit to OFF.

Of course it can be usefull for other tuner for overwrite default
settings of FM.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:25 -03:00
Andy Walls
5ddc9b100f V4L/DVB (11933): tuner-simple, tveeprom: Add Philips FQ1216LME MK3 analog tuner
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:25 -03:00
Andy Walls
7360055aa3 V4L/DVB (11932): ivtv: Add missing newline
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:24 -03:00
Andy Walls
3cd5270c41 V4L/DVB (11931): lnbp21: Add missing newline
Reported-by: VDR User <user.vdr@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:23 -03:00
Abylay Ospan
0d834635a3 V4L/DVB (11930): TS continuity check: show error message when discontinuity detected or TEI flag detected in header
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:23 -03:00
Devin Heitmueller
d6a9a430a6 V4L/DVB (11928): au0828: provide module option to disable USB speed check
Add an au0828 module option that allows a user to override the USB speed check.
Intended for advanced users who understand the consequences of trying to use
the device with a 12Mbps bus.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:22 -03:00
Devin Heitmueller
e2a1b79f7d V4L/DVB (11927): em28xx: provide module option to disable USB speed check
Add an em28xx module option that allows a user to override the USB speed check.
Intended for advanced users who understand the consequences of trying to use
the device with a 12Mbps bus.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:22 -03:00
Devin Heitmueller
0f9fba3129 V4L/DVB (11926): tuner-core: fix warning introduced when cleaning up xc5000 init routine
This patch removes some remaining dead code.  Warning showed up in Hans
Verkuil's daily report after I committed hg changeset 7f2eea75118b.

Thanks to Michael Krufky for bringing the warning to my attention.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:21 -03:00
Devin Heitmueller
3ed58baf5d V4L/DVB (11925): em28xx: Add support for the K-World 2800d
Make the KWorld 2800d work properly.  In this case, that means making the
profile more generic so that it works for both the Pointnix Intra-Oral USB
camera and the KWorld device.

The device provides the audio through a pass-thru cable, so we don't need
an actual audio capture profile (neither the K-World device nor the Pointnix
have an onboard audio decoder).

Thanks to Paul Thomas for providing sample hardware.

Cc: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:20 -03:00
Devin Heitmueller
ee3436b828 V4L/DVB (11924): au0828: Don't let device work unless connected to a high speed USB port
The au0828 basically just doesn't work at 12 Mbps.  The isoc pipe needs
nearly 200 Mbps for analog support, so users would see garbage video, and on
the DVB/ATSC side scanning is likely to work but if the user tried to tune it
would certainly appear to have failed.

It's better to fail explicity up front and tell the user to plug into a USB 2.0
port, than to let the driver load and the user have weird problems with tuning
and garbage video.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:20 -03:00
Devin Heitmueller
64a00b43e6 V4L/DVB (11923): em28xx: Don't let device work unless connected to a high speed USB port
The em28xx basically just doesn't work at 12 Mbps.  The isoc pipe needs
nearly 200 Mbps for analog support, so users would see garbage video, and on
the DVB/ATSC side scanning is likely to work but if the user tried to tune it
would certainly appear to have failed.

It's better to fail explicity up front and tell the user to plug into a USB 2.0
port, than to let the driver load and the user have weird problems with tuning
and garbage video.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:19 -03:00
Mauro Carvalho Chehab
e2860d9621 V4L/DVB (11922): tuner-xc2028: cleanup: better use tuner type defines
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:18 -03:00
Mauro Carvalho Chehab
0a863975e2 V4L/DVB (11918): tuner-xc2028: Fix offset frequencies for DVB @ 6MHz
Both ATSC and DVB @ 6MHz bandwidth require the same offset.

While we're fixing it, let's cleanup the bandwidth setup to better
reflect the fact that it is a function of the bandwidth.

Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and
to Andy Walls <awalls@radix.net> for an initial patch for this fix.

Cc: Terry Wu <terrywu2009@gmail.com>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:18 -03:00
Mauro Carvalho Chehab
a1014d70db V4L/DVB (11917): Fix firmware load for DVB-T @ 6MHz bandwidth for xc3028/xc3028L
The only two countries that are known to use 6MHz bandwidth are Taiwan
and Uruguay. Both use QAM subcarriers at OFTM.

This patch fixes the firmware load for such countries, where the
required firmware is the QAM one.

This also confirms the previous tests where it was noticed that the 6MHz
QAM firmware doesn't work for cable. So, this patch also removes support
for DVB-C, instead of just printing a warning.

Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and
to Andy Walls <awalls@radix.net> for an initial patch for this fix.

Cc: Terry Wu <terrywu2009@gmail.com>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:17 -03:00
Antti Palosaari
22d4645311 V4L/DVB (11915): af9015: support for Genius TVGo DVB-T03
Add USB ID (0458:4012) for Genius TVGo DVB-T03.
Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing.

Tested-by: Petr Vodicka <vodicka.petr@email.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:17 -03:00
Andy Walls
9ad4c6551b V4L/DVB (11898): cx18: Perform 64 bit divide so it works for 32 bit systems
Thanks to David Ward and Mike Krufky for reporting the problem and
debugging this as an unresolved symbol due to a 64 bit divide on a 32 bit
system.  David Ward provided the content of this patch; Andy Walls only
performed some cosmetic edits.

Reported-by: David Ward <david.ward@gatech.edu>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Robert Krakora
75c74d1c78 V4L/DVB (11896): em28xx: Fix for Slow Memory Leak
Test Code:  (Provided by Douglas)

v4l-dvb/v4l2-apps/test/stress-buffer.c

The audio DMA area was never being freed and would slowly leak over
time as the v4l device was opened and closed by an application.

Thanks again to Douglas for generating the test code to help locate
memory leaks!!!

Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Filipe Rosset
f41b696156 V4L/DVB (11895): bt8xx: remove always false if
Remove always false if over unsigned int variable

Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Randy Dunlap
ab482a6c18 V4L/DVB (11881): one kconfig controls them all
Add a kconfig symbol that allows someone to disable all
multimedia config options at one time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
David Wong
493b7127aa V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH
This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Miroslav Sustek
3047a17639 V4L/DVB (11879): Adds support for Leadtek WinFast DTV-1800H
Enables analog/digital tv, radio and remote control (gpio).

Tested-by: Marcin Wojcikowski <emtees.mts@gmail.com>
Tested-by: Karel Juhanak <karel.juhanak@warnet.cz>
Tested-by: Andrew Goff <goffa72@gmail.com>
Tested-by: Jan Novak <novak-j@seznam.cz>
Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Hans de Goede
9035f2e27a V4L/DVB (11872): gspca - spca561: Rename the 'White Balance' control to 'Hue'.
Binary files /home/v4l/tokernel/oldtree/Documentation/video4linux/v4lgrab.o and /home/v4l/tokernel/linux/Documentation/video4linux/v4lgrab.o differ

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Hans de Goede
d0848eb286 V4L/DVB (11871): gspca - spca561: Change the Rev12a controls.
- Extend the gain range
- Adjust the exposure
- Remove the broken autogain

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine
191d0e7fba V4L/DVB (11869): gspca - ov534: JPEG 320x240 and 640x480 formats for ov965x.
The YUYV 640x480 format did not work with ov965x.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine
7880f66138 V4L/DVB (11868): gspca - spca508: Optimize code.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine
1af63b3d1d V4L/DVB (11867): gspca - spca508: Cleanup source and update copyright.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00