When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of
jiffies is not handled in the correct way. This cause the scan list to go
empty during this time for a small duration
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixing the code to avoid overwriting of the first index in the probed ssid
list maintained by the hardware. This index is used to store broadcast SSID.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adding state in driver to track the sme state. The connect/disconnect
events from the driver were messing up the state maintained within the
cfg80211 module.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixing the cached copy of the BSS filter set by user.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch fixes a mismatch in the allocation and free of scatter HIF bus
requests in the suspend/resume path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adding host side interface to configure the excessive TX retry threshold.
It is used by the target to determine disconnection triggers. Additionally,
some definitions have been added to header file wmi.h to bridge the gap
for the newly added command.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Virtual Scatter Gather Lists not getting freed during the HTCStop(). The
patch adds some clean up code in the code path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move all the wmi configuration commands done after wmi_ready to a single
function.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixing the driver initialization for manufacturing mode that involves
downloading a firmware binary meant for RF tests on the factory floor.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to
clear the firmware previous profile state. There is one case in linux host
driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD.
This causes firmware state to mismatch causing an ASSERT. Use the driver
state variable arConnectPending to track whether a WMI_CONNECT_CMD is
issued to firmware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return correct scan complete status to the cfg80211 module based on
the value returned from the hardware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario
where the EAPOL frames were going encrypted during an auto reconnection
attempt. The initial 4-way handshake would go fine but then the driver
was getting a command to set default keys sometime later. Setting of an
incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during
the subsequent 4-way handshake attempts to go encrypted causing the AP to
reject the station.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver was dereferencing a NULL pointer because of the device instance
being registered via the set_wiphy_dev() function. The function
ar6000_avail_ev() was passing the argument as NULL instead of using the one
returned by the MMC stack through the probe callback.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently the device is initialized when first write is done to the
device. Any read attempt before the first write would fail, including
"hidden" read the user may not know about (as for example if he tries
to write a partial block).
This patch initializes the device on first request, whether read or
write.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Get rid of unused stubs for trigger and buffer support.
Fix line length issues.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed stubs related to buffering and triggering. Put them back
when they are actually needed.
Fixed line length issues.
Made a number of functions static as no longer in header.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Also added a device id table to the spi version.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A very simple use of a kfifo as an alternative for the ring_sw
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The subject says it all. There is no need to
specify different page protection bits based
on the architecture.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
