Johannes Berg 26e30c6489 ARM: imx: enable big endian mode ...

Enable ARM big-endian mode on mach-imx. This requires adding some
byte swapping in the debug functions (which otherwise hang forever)
and of course the secondary core bringup.

Tested (on top of 4.4) on i.MX6 HummingBoard quad-core (IMX6Q).

The patch is pretty much as suggested by Arnd Bergmann, thanks!

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

2016-02-02 13:31:19 +08:00

..

devices

[media] move media platform data to linux/platform_data/media

2015-11-19 08:09:38 -02:00

3ds_debugboard.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

3ds_debugboard.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

anatop.c

ARM: imx7d: correct chip version information

2016-01-28 16:31:59 +08:00

avic.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

board-mx31lilly.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

board-mx31lite.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

board-mx31moboard.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

common.h

ARM: use const and __initconst for smp_operations

2015-12-01 22:17:45 +01:00

cpu-imx5.c

ARM: imx5: retrieve iim base from device tree

2014-07-18 16:10:07 +08:00

cpu-imx25.c

ARM: mx25: Retrieve IIM base from dt

2015-03-13 22:06:35 +08:00

cpu-imx27.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

cpu-imx31.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

cpu-imx35.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

cpu.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

cpuidle-imx5.c

cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic

2014-11-12 21:17:27 +01:00

cpuidle-imx6q.c

ARM: imx6: set initial power mode in pm function

2015-06-03 14:44:31 +08:00

cpuidle-imx6sl.c

ARM: imx6: set initial power mode in pm function

2015-06-03 14:44:31 +08:00

cpuidle-imx6sx.c

ARM: imx6: set initial power mode in pm function

2015-06-03 14:44:31 +08:00

cpuidle.h

ARM: imx: support arm power off in cpuidle for i.mx6sx

2015-01-05 21:34:29 +08:00

crmregs-imx3.h

…

devices-imx1.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx21.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx27.h

ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

2012-11-16 16:21:48 +01:00

devices-imx31.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx35.h

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

ehci-imx27.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

ehci-imx31.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

ehci-imx35.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

ehci.h

ARM: imx5: remove imx51 non-DT support files

2014-07-18 16:10:05 +08:00

epit.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

eukrea-baseboards.h

ARM: i.MX: Remove mach-cpuimx27sd board file

2014-09-01 22:00:01 +08:00

gpc.c

ARM: imx: add platform irq type setting in gpc

2015-11-23 13:12:07 +08:00

hardware.h

ARM: imx: move revision definitions and declarations into a header

2015-06-03 14:44:30 +08:00

headsmp.S

ARM: imx: enable big endian mode

2016-02-02 13:31:19 +08:00

hotplug.c

ARM: imx: do not return from imx_cpu_die() call

2013-10-21 09:37:31 +08:00

iim.h

ARM: imx: include iim.h rather than mach/iim.h

2012-10-15 10:03:10 +08:00

imx1-dt.c

ARM: i.MX1: Add devicetree support

2014-09-16 10:06:44 +08:00

imx27-dt.c

ARM: imx: clean up machine mxc_arch_reset_init_dt reset init

2014-11-22 07:39:36 +08:00

imx31-dt.c

ARM: imx: clean up machine mxc_arch_reset_init_dt reset init

2014-11-22 07:39:36 +08:00

imx35-dt.c

ARM: imx: clean up machine mxc_arch_reset_init_dt reset init

2014-11-22 07:39:36 +08:00

iomux-imx31.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

iomux-mx1.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx2x.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx3.h

ARM: imx: Fix trivial typo in comments

2015-03-03 12:05:46 +08:00

iomux-mx21.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx27.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx35.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-v1.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

iomux-v1.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-v3.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

iomux-v3.h

ARM: imx: Fix trivial typo in comments

2015-03-03 12:05:46 +08:00

irq-common.c

ARM: imx: irq-common: Include header to avoid sparse warning

2013-06-17 15:45:14 +08:00

irq-common.h

ARM: imx: drop support for irq priorisation

2013-12-09 13:18:25 +08:00

Kconfig

ARM: imx: enable big endian mode

2016-02-02 13:31:19 +08:00

mach-apf9328.c

ARM: i.MX: Setup IRQ handler from IRQ driver

2014-05-12 22:58:51 +08:00

mach-armadillo5x0.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-bug.c

ARM: i.MX: Setup IRQ handler from IRQ driver

2014-05-12 22:58:51 +08:00

mach-imx6q.c

PM / OPP: Prefix exported opp routines with dev_pm_opp_

2015-09-15 02:03:16 +02:00

mach-imx6sl.c

ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier

2015-06-03 14:49:18 +08:00

mach-imx6sx.c

ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier

2015-06-03 14:49:18 +08:00

mach-imx6ul.c

mach-imx/mach-imx6ul.c: proper constness with __initconst

2015-11-25 11:06:52 +08:00

mach-imx7d.c

ARM: imx: enable cpufreq device on i.mx7d

2015-12-02 13:38:03 +08:00

mach-imx25.c

ARM: mx25: Remove static memory mapping

2015-03-13 22:14:57 +08:00

mach-imx27_visstrim_m10.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

mach-imx50.c

ARM: imx: clean up machine mxc_arch_reset_init_dt reset init

2014-11-22 07:39:36 +08:00

mach-imx51.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-imx53.c

ARM: SoC platform changes for 3.19

2014-12-09 14:38:28 -08:00

mach-kzm_arm11_01.c

ARM: i.MX: Setup IRQ handler from IRQ driver

2014-05-12 22:58:51 +08:00

mach-ls1021a.c

ARM: imx: Add Freescale LS1021A SMP support

2014-11-23 14:56:21 +08:00

mach-mx21ads.c

gpio: generic: factor into gpio_chip struct

2016-01-05 11:21:00 +01:00

mach-mx27_3ds.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

mach-mx27ads.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-mx31_3ds.c

arm: mach-imx: Convert pr_warning to pr_warn

2014-09-16 10:09:41 +08:00

mach-mx31ads.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-mx31lilly.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

mach-mx31lite.c

arm: mach-imx: Convert pr_warning to pr_warn

2014-09-16 10:09:41 +08:00

mach-mx31moboard.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-mx35_3ds.c

ARM: imx/iomux-v3: allow pad_list to be const

2015-03-03 12:04:41 +08:00

mach-pca100.c

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

mach-pcm037_eet.c

ARM: imx: include common.h rather than mach/common.h

2012-10-15 10:03:10 +08:00

mach-pcm037.c

arm: mach-imx: Convert pr_warning to pr_warn

2014-09-16 10:09:41 +08:00

mach-pcm043.c

ARM: imx/iomux-v3: allow pad_list to be const

2015-03-03 12:04:41 +08:00

mach-qong.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

mach-scb9328.c

ARM: i.MX: Setup IRQ handler from IRQ driver

2014-05-12 22:58:51 +08:00

mach-vf610.c

ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC

2015-05-20 23:10:14 +02:00

mach-vpr200.c

ARM: imx/iomux-v3: allow pad_list to be const

2015-03-03 12:04:41 +08:00

Makefile

ARM: imx: add i.mx6ul msl support

2015-07-14 15:06:14 +08:00

Makefile.boot

ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC

2015-05-20 23:10:14 +02:00

mm-imx1.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mm-imx3.c

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

2013-07-03 09:46:29 -07:00

mm-imx21.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mm-imx27.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mmdc.c

ARM: imx: mmdc: Include "common.h" header file

2015-06-03 14:49:34 +08:00

mx1.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx2x.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx3x.h

ARM: imx: move revision definitions and declarations into a header

2015-06-03 14:44:30 +08:00

mx21.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx27.h

ARM: imx: move revision definitions and declarations into a header

2015-06-03 14:44:30 +08:00

mx31.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31lilly-db.c

ARM: imx: remove IRQF_DISABLED

2013-10-21 09:11:05 +08:00

mx31lite-db.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31moboard-devboard.c

ARM: imx: use PTR_ERR_OR_ZERO

2014-07-18 16:11:36 +08:00

mx31moboard-marxbot.c

ARM: imx: use PTR_ERR_OR_ZERO

2014-07-18 16:11:36 +08:00

mx31moboard-smartbot.c

ARM: imx: use PTR_ERR_OR_ZERO

2014-07-18 16:11:36 +08:00

mx35.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mxc.h

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

pcm037.h

…

platsmp.c

ARM: use const and __initconst for smp_operations

2015-12-01 22:17:45 +01:00

pm-imx3.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

pm-imx5.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

pm-imx6.c

ARM: imx6: fix cleanup path in imx6q_suspend_init()

2016-01-28 16:31:45 +08:00

pm-imx27.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

src.c

ARM: imx: remove imx_src_prepare_restart() call

2013-11-11 22:58:43 +08:00

ssi-fiq-ksym.c

ARM: imx: merge plat-mxc into mach-imx

2012-10-15 10:02:19 +08:00

ssi-fiq.S

ARM: imx: merge plat-mxc into mach-imx

2012-10-15 10:02:19 +08:00

suspend-imx6.S

ARM: imx: add suspend/resume support for i.mx6ul

2015-09-17 08:54:35 +08:00

suspend-imx53.S

ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.

2015-06-03 14:49:36 +08:00

system.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

tzic.c

ARM: imx: use endian-safe readl/readw/writel/writew

2016-02-02 13:24:17 +08:00

ulpi.h

ARM: imx: Remove mxc specific ulpi access ops

2013-06-17 15:45:16 +08:00