linux/arch/powerpc/sysdev
Aurelien Jarno 3a800ff50a [POWERPC] i8259: Add disable method
Since commit 76d2160147, the NE2000 card
is not working anymore on PPC and POWERPC and produces WATCHDOG
timeouts.

The patch below fixes that the same way it has been done on x86, x86_64
and MIPS.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:29 +11:00
..
bestcomm [POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon. 2007-10-21 10:52:02 -06:00
qe_lib [POWERPC] QE: pario - support for MPC85xx layout 2007-10-08 08:39:01 -05:00
axonram.c missed bio_endio() in axonram 2007-10-11 23:04:25 -07:00
commproc.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
commproc.h [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
cpm2_common.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm_common.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
dart_iommu.c [POWERPC] Fix section mismatch in dart_iommu.c 2007-08-17 11:02:06 +10:00
dart.h [POWERPC] Use 4kB iommu pages even on 64kB-page systems 2006-11-01 14:52:48 +11:00
dcr-low.S [POWERPC] Generic DCR infrastructure 2006-12-04 16:08:25 +11:00
dcr.c Use dcr_host_t.base in dcr_unmap() 2007-10-15 14:29:49 -04:00
fsl_pci.c [POWERPC] Add missing semicolon for fsl_pci.c 2007-10-16 09:06:43 -05:00
fsl_pci.h [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected 2007-07-23 10:27:08 -05:00
fsl_soc.c [POWERPC] spi: Support non-QE processors 2007-10-08 09:05:30 -05:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime 2007-07-23 22:29:09 -05:00
i8259.c [POWERPC] i8259: Add disable method 2007-11-08 14:15:29 +11:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
ipic.h [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
Makefile [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 2007-10-16 17:09:34 -06:00
micropatch.c [POWERPC] 8xx: powerpc port of core CPM PIC 2007-02-07 14:03:17 +11:00
mmio_nvram.c [POWERPC] Fix cell's mmio nvram to properly parse device tree 2007-01-22 21:27:35 +11:00
mpc8xx_pic.c [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c Add dcr_host_t.base in dcr_read()/dcr_write() 2007-10-15 14:29:49 -04:00
mpic.h [POWERPC] Support setting affinity for U3/U4 MSI sources 2007-09-22 14:49:22 +10:00
mv64x60_dev.c [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support 2007-07-24 21:16:02 +00:00
mv64x60_pci.c [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime 2007-07-23 22:29:09 -05:00
mv64x60_pic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
mv64x60_udbg.c [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
pmi.c [POWERPC] Move of_platform_driver initialisations: arch/powerpc 2007-10-11 20:40:49 +10:00
rtc_cmos_setup.c [POWERPC] Add interrupt resource for RTC CMOS driver 2007-08-17 13:18:58 -05:00
tsi108_dev.c [POWERPC] Fix problems with device tree representation of TSI-1xx bridges 2007-06-14 22:30:17 +10:00
tsi108_pci.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
uic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
xilinx_intc.c [POWERPC] Virtex: add xilinx interrupt controller driver 2007-10-03 07:23:14 -05:00