Jakub Kicinski 5451bb29f7 sc16is7xx: remove RS-485 delay RTS handling ... Users of RS-485 can request via ioctl that RTS signals should be activated selected number of milliseconds before the actual data transmission or delay reception certain number of milli- seconds after the transmission is finished. In sc16is7xx, however, RTS signalling is handled by the hardware and driver has no way of providing this feature. We still try to provide .delay_rts_before_send by delaying transmission but without actual effect on the RTS line. Note: this change will make the driver return -EINVAL when the feature is requested (.delay_rts_after_send is set). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2015-06-01 06:45:28 +09:00
..
8250	tty: serial/8250: remove console dependency for mediatek	2015-05-24 13:06:09 -07:00
cpm_uart	tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1	2015-03-26 23:00:36 +01:00
jsm	serial: jsm: some off by one bugs	2015-03-26 23:00:36 +01:00
21285.c
68328serial.c	tty: 68328serial.c: move assignment out of if () block	2015-05-10 19:04:16 +02:00
altera_jtaguart.c	drivers/tty/serial: altera: fix typos in #endif comments	2015-05-06 22:26:58 +02:00
altera_uart.c	drivers/tty/serial: altera: fix typos in #endif comments	2015-05-06 22:26:58 +02:00
amba-pl010.c
amba-pl011.c	drivers: PL011: add ACPI probing for SBSA UART	2015-05-24 13:08:51 -07:00
apbuart.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
apbuart.h
ar933x_uart.c	serial: ar933x_uart: Fix off-by-one for checking valid alias id	2015-03-07 03:20:25 +01:00
arc_uart.c
atmel_serial.c	tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send	2015-05-24 12:49:16 -07:00
bcm63xx_uart.c	tty: serial/bcm63xx_uart: fix sparse warning	2015-03-07 03:13:07 +01:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	serial: bfin: ctsrts: enfore Kconfig naming convention	2015-05-06 22:26:59 +02:00
clps711x.c	serial: clps711x: fail if mctrl_gpio_init fails	2015-03-07 03:15:03 +01:00
crisv10.c	tty: crisv10.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
crisv10.h
digicolor-usart.c	tty/serial: digicolor: remove sysrq reference	2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c	earlycon: Revert log warnings	2015-05-08 14:20:50 +02:00
efm32-uart.c
etraxfs-uart.c	serial: driver for ETRAX FS UART	2015-02-07 18:43:16 +08:00
fsl_lpuart.c	Merge 4.0-rc7 into tty-next	2015-04-07 11:07:20 +02:00
icom.c	tty: icom.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c	serial: ifx6x60: Remove superfluous casts when calling request_irq()	2015-05-06 22:27:01 +02:00
ifx6x60.h
imx.c	serial: imx: Constify platform_device_id	2015-05-10 19:08:16 +02:00
ioc3_serial.c	tty: ioc3_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ioc4_serial.c	tty: ioc4_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig	sc16is7xx: spi interface is added	2015-06-01 06:45:27 +09:00
kgdb_nmi.c	serial: kgdb_nmi: Use bool function return values of true/false not 1/0	2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c
lpc32xx_hs.c
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	sc16is7xx: spi interface is added	2015-06-01 06:45:27 +09:00
max310x.c
max3100.c	tty: max3100: use msecs_to_jiffies for time conversion	2015-03-07 03:13:08 +01:00
mcf.c	drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE	2015-05-06 22:26:59 +02:00
men_z135_uart.c	tty: serial: men_z135_uart: Fix driver for changes in hardware	2015-02-02 10:11:27 -08:00
meson_uart.c	ARM: meson: serial: convert iounmap to devm_iounmap	2015-05-06 22:27:02 +02:00
mpc52xx_uart.c	drivers/tty/serial/mpc52xx_uart.c: fix typo in C comment	2015-05-06 22:26:59 +02:00
mpsc.c	tty: mpsc.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
msm_serial.c	tty: serial: msm_serial: Remove console unregistration from driver exit.	2015-02-02 10:11:25 -08:00
msm_serial.h	tty: serial: msm_serial: Remove dead code	2015-03-26 22:31:09 +01:00
mux.c
mxs-auart.c	serial: mxs: Constify platform_device_id	2015-05-10 19:08:16 +02:00
netx-serial.c
nwpserial.c
of_serial.c	serial: of_serial: do not set port.type twice	2015-05-10 19:10:08 +02:00
omap-serial.c	serial: omap: Fix error handling in probe	2015-05-08 14:20:50 +02:00
pch_uart.c
pmac_zilog.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
rp2.c
sa1100.c
samsung.c	serial: samsung: Constify platform_device_id	2015-05-10 19:08:16 +02:00
samsung.h	serial: samsung: add DMA support for RX	2015-01-09 14:25:39 -08:00
sb1250-duart.c
sc16is7xx.c	sc16is7xx: remove RS-485 delay RTS handling	2015-06-01 06:45:28 +09:00
sccnxp.c
serial_core.c	tty: remove buf parameter from tty_name()	2015-05-06 22:26:57 +02:00
serial_ks8695.c
serial_mctrl_gpio.c	serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL	2015-05-24 13:06:08 -07:00
serial_mctrl_gpio.h
serial_txx9.c
serial-tegra.c	serial: tegra: Fix memory leak on DMA setup failure	2015-05-24 12:53:44 -07:00
sh-sci.c	serial: sh-sci: Remove obsolete comment about overrun detection	2015-05-10 19:06:39 +02:00
sh-sci.h	serial: sh-sci: Replace hardcoded overrun bit values	2015-05-10 19:06:39 +02:00
sirfsoc_uart.c	serial: sirf: assign console default index if users not set a valid one	2015-05-24 12:50:41 -07:00
sirfsoc_uart.h	serial: sirf: add serial loopback function support	2015-05-24 12:50:41 -07:00
sn_console.c
sprd_serial.c	Merge 4.0-rc3 into tty-testing	2015-03-09 07:08:37 +01:00
st-asc.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
suncore.c
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c	serial: xilinx: Use platform_get_irq to get irq description structure	2015-04-28 14:26:21 +02:00
ucc_uart.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c	serial: xuartps: add __init to earlycon write method	2015-05-10 19:10:08 +02:00
zs.c
zs.h