mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
73d2eaac8a
The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Tested-by: Leigh Porter <leigh@leighporter.org> Tested-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|---|---|---|
| .. | ||
| hotplug | ||
| pcie | ||
| .gitignore | ||
| access.c | ||
| bus.c | ||
| dmar.c | ||
| hotplug-pci.c | ||
| hotplug.c | ||
| htirq.c | ||
| intel-iommu.c | ||
| intr_remapping.c | ||
| intr_remapping.h | ||
| ioapic.c | ||
| iov.c | ||
| iova.c | ||
| irq.c | ||
| Kconfig | ||
| legacy.c | ||
| Makefile | ||
| msi.c | ||
| msi.h | ||
| pci-acpi.c | ||
| pci-driver.c | ||
| pci-stub.c | ||
| pci-sysfs.c | ||
| pci.c | ||
| pci.h | ||
| probe.c | ||
| proc.c | ||
| quirks.c | ||
| remove.c | ||
| rom.c | ||
| search.c | ||
| setup-bus.c | ||
| setup-irq.c | ||
| setup-res.c | ||
| slot.c | ||
| syscall.c | ||