A drop a read-only shared folder refused left the drag chip to vanish
where it was let go, as if something had happened. It now slides back
to where the drag began, as any drop that doesn't land does.
Folders shared read-only lit up under a drag and took the drop, which
the server then refused with "Forbidden". They no longer light up, and
a drop on one sends the drag back where it began; they still open on a
dwell.
A drag that springs into Shared and is let go over the listing rather
than a folder tried to move the items into Shared itself, which is a
query and not a folder: nothing moved, nothing said so, and the user was
left in Shared. Let go over a listing that takes no items, the drag now
goes back to the folder it started in, as the cancel zone does.
A chip click lists Shared again so its rows are current. When that
request failed, the listing was replaced with "This folder couldn't be
opened" and the chips disappeared, though only a filter had changed. A
filter change now applies to the rows already loaded when the listing
can't be fetched.
Dragging an item out of a shared folder and holding it over Up, Back or
the Shared crumb opens Shared to drop into a folder there. The people
filter, which now lasts while browsing shared items, could hide those
folders, and its chips can't be pressed mid-drag. A drag arriving in
Shared now sees everyone's folders.
The initial-and-color avatar drew its letter at too little contrast for
nearly half the hues a username can map to: yellows and greens came out
near 3:1 in light mode, and lower still on a selected row. The letter is
now darker in light mode and lighter in dark mode, reaching 4.5:1 for
every hue on the page, selected rows and the share suggestions' hover
row. The share dialog and the Shared listing change together, so a
person keeps one look.
Each sharer comparison called localeCompare with options, which builds
a collator per call: sorting 2,000 rows took about 25ms in Chrome. One
shared Intl.Collator orders them the same in under 1ms.
In the two-line row layout, a long username grew the details line past
the row, pushing the date off screen and under the ⋯ button. The name
now ends in an ellipsis, and the line keeps clear of the button as the
name line does.
Opening a "shared with you" notification, or a share link, while Shared
was filtered to someone else picked out nothing: the item was filtered
away. The filter now gives way to everyone's when it hides an item the
notification or link names.
Remove from Shared only took the row away, leaving the people filter
counting the item. Removing the last item of the person filtered to left
a blank pane under a chip that still claimed one. Shared is now listed
again afterwards, which updates the filter, the empty notice and the
footer.
Opening a folder from a filtered Shared view and going Back reset the
filter to Everyone, so going through one person's folders meant picking
them again each time. The filter now lasts while the user browses what
was shared with them, and clears once they go back to their own files.
Auto-fitting the column measured names in a font the cell doesn't use
and left out part of its padding, so the longest name still ended in an
ellipsis. It now reads the font, padding, avatar and gap off a rendered
cell.
Narrowed, its two-word label wrapped onto a second line that spilled out
of the 32px header row. It now stays on one line and ends in an
ellipsis, as longer translations need too.
In a listing between the phone layout and about 700px wide, the fixed
160px "Shared by" column squeezed an auto-width name down to a few
characters. Beside an auto-width name, "Shared by" now takes at most 40%
of the room the two split, and resizing it stops at the same width.
The Shared view now names the person behind every item:
- List view gets a sortable, resizable "Shared by" column with the
share modal's initial-and-color avatar. The tooltip names the owner
too when someone else re-shared the item.
- Grid tiles show the sharer under the item name.
- Narrow listings lead each row's second line with the sharer.
- A people filter above the listing (one chip per sharer, with counts)
narrows the view to one person. It shows once two or more people have
shared something, and scrolls sideways on small screens.
Sorting by "Shared by" applies only in the Shared view; other folders
keep sorting by name while it is the saved sort.
* fix(dashboard): show notification times in Brazilian Portuguese, Ukrainian and Traditional Chinese
The notification panel and toasts handed Puter's language code straight to
Intl, and a few of those codes aren't BCP 47 tags. Brazilian Portuguese
(`br`) is Breton to Intl, so times read "5 munut zo"; Ukrainian (`ua`)
fell back to the browser's default language; and `zhtw` threw, so Taiwan
users got English. Those codes are now mapped to pt-BR, uk and zh-TW
before formatting.
* fix(dashboard): count "yesterday" and "N days ago" in calendar days
Notification times rounded the elapsed hours to whole days, so at 23:30
something from 00:45 the same day read "yesterday", and on Wednesday
morning something from Monday night (34 hours earlier) read "yesterday"
too. Days are now counted from midnight to midnight in the reader's time
zone; anything from today stays in hours.
* fix(dashboard): don't let deploy results crowd notifications out of the panel
The panel listed the 30 newest notification rows and then dropped the
ones it never shows, a worker's deploy results among them. A developer
with 30 deploys since their last share saw "No notifications" and no
badge while the share sat behind them. The listing now asks for up to
200 rows and keeps the newest 30 the panel shows.
* fix(dashboard): keep every unread notification in the panel
The socket replays up to 200 unread notifications on connect, but the
panel's listing held only the 30 newest, and the first refresh after that
dropped the rest: 45 unread read "45" until the panel was opened, then
"30", and "Mark all as read" left the other 15 unread on the server for
the next visit. The panel now keeps unread notifications past the newest
30, up to the 200 a listing returns.
* fix(dashboard): let Undo take back a new Files folder or file
The Files tab creates folders and New › files itself rather than through
the desktop's helpers, and never recorded them for Undo. Undo then
reversed whatever came before: upload notes.txt, create a folder, press
Ctrl+Z, and notes.txt was deleted for good (undoing an upload deletes it
outright, not to Trash) while the new folder stayed. Both now record
themselves, so Undo removes what was just created, as on the desktop.
* fix(dashboard): let Undo take back a Files cut and paste
Pasting cut items in the Files tab moves them itself rather than through
the desktop's move_items, and recorded nothing for Undo. Undo after a
paste reversed the action before it instead, which deletes an upload for
good. The paste now records the move as move_items does, so Undo puts
the items back where they were cut from.
* fix(dashboard): don't drop a Files selection onto one of its own folders
With folders A and B selected, dragging A onto B moved A into B and then
stopped on "Cannot move a directory into itself" for B. Hovering B also
sprang it open mid-drag. A folder row that is part of the drag is no
longer a drop target, so the drag reverts as it does over any other
non-target. A drop elsewhere (a sidebar folder, say) also leaves out the
target folder itself and any folder that holds it.
* fix(dashboard): don't drop a Files refresh asked for during another
A refresh of the folder on screen was ignored while another refresh of
it was loading. Drop two files: when the second finished during the
first's refresh, its own refresh was dropped, the earlier listing (read
before the file existed) was drawn, and the file's item.added was
ignored meanwhile too, so it stayed missing until a manual refresh.
Paste, Refresh and returning to the browser tab could lose items the
same way. A refresh now takes over from one in flight, as opening
another folder already did; a navigation in progress still holds.
* fix(dashboard): keep the phone selection bar after cancelling a delete
In select mode on a phone, tapping Delete permanently and then Cancel
left every item selected but hid the floating action bar, the only way
to act on the selection, until the selection next changed. The same
happened when nothing in the selection could be moved to Trash. The bar
now goes away only once something is actually deleted or trashed.
* fix(dashboard): show the phone selection bar when Select starts with a selection
Uploaded or pasted items arrive selected. Tapping Select on a phone then
turned select mode on with them selected but no floating action bar,
until a row was toggled. Entering select mode now brings the bar up for
the selection it starts with.
* fix(dashboard): give Files footer sizes in the rows' format
The footer used the desktop's byte formatter while the rows use their
own, so a 5-byte file read "5 B" in its row and "5.00 Bytes" below it,
1.5 KB read "1.50 KB", and a folder of folders read "0 Byte". The footer
now formats sizes as the rows do.
* fix(dashboard): title a trashed folder's Properties with its name
Properties from the breadcrumb of a folder opened inside Trash was
titled with the folder's uid, the last segment of its trashed path,
while the crumb itself showed the original name. It now uses that name.
* fix(dashboard): show delete and log-out confirmations without entities
The Files tab's "delete these items permanently?" confirmation and the
dashboard's "close your apps and log out?" one passed HTML-encoded i18n
strings to UIAlert, which encodes its message and button labels again.
In Igbo both questions read "Ị ji n'aka …". These alerts, and the
Files tab's name-conflict and folder-depth ones, now pass plain strings.
* fix(gui): read the Trash's state fresh when updating its icon
refresh_trash_state stats the Trash to pick the empty or full icon, and
its comment calls for a strong read, but it asked for an eventual one.
Once a listing of Home had cached the Trash entry (without `is_empty`),
the stat came back without it: permanently deleting the last items from
Trash in Files left the full-Trash icon up, and other tabs were told the
same. The stat is now strong, as intended.
* fix(dashboard): don't add a Files row to a folder opened meanwhile
A file added from elsewhere (an upload, another tab, an app) is checked
against the folder on screen and then drawn once its icon resolves. A web
link's or app's icon is read from the file, and opening another folder
during that read put the row into the new folder's listing, where it
stayed and opened the file from the old one. The checks now run again
once the icon is in.
* fix(dashboard): let a focused folder or crumb take the Menu key
The Files tab answered the Menu key and Shift+F10 with the selection's
menu wherever focus was. With a file selected and a sidebar folder, a
breadcrumb or Home's Shared row focused, the key opened the file's menu;
with nothing selected it cancelled the browser's contextmenu, so the
focused element opened none. A focused control now gets the browser's
contextmenu event, and its own menu, as with a right-click.
* fix(dashboard): don't drop New Folder during a Files refresh
New Folder did nothing while the folder on screen was refreshing (after
an upload or paste, or on returning to the browser tab). A refresh keeps
the rows up with no spinner, so the click just looked ignored. It now
takes over the refresh and makes the folder once the listing is in;
during a navigation to another folder it is still dropped, as before.
* fix(dashboard): step through Files names on a repeated letter
Type-to-select meant to move past the selected row to the next name with
the same start, but returned early whenever the selected row matched, so
the stepping never ran: with readme, report-a and report-b, pressing "r"
again stayed on readme, and "rr" matched nothing. A repeated letter now
steps through the names it starts, wrapping around, as file managers do;
a longer prefix still stays on a selected row it matches.
* fix(dashboard): open one touch menu per long-press
A long-press on Android fires both contextmenu and taphold. The Files
rows already ignore the second, but a breadcrumb, a sidebar folder,
Home's Shared and Trash rows and the listing's empty space each opened a
second sheet over the first; picking an item or tapping the backdrop
then left the other one up. The touch menu now doesn't open while
another is on screen.
* fix(dashboard): treat Ctrl+click on a Mac as a right-click in Files
On a Mac, Ctrl+click opens the context menu, but the Files rows read it
as a Ctrl-toggle first: Ctrl+clicking one of three selected files
deselected it and the menu then acted on that file alone, and on an
unselected file it was added to the selection. On a Mac it now leaves
the selection alone, as a right-click does; Cmd+click still toggles.
* fix(dashboard): keep arrow keys in the open phone drawer on Apps
With the drawer open over the Apps tab, an arrow key moved focus out of
it to the first app tile behind the scrim, and the next Tab then walked
the page behind it. The open drawer now keeps the arrow keys, as the
notifications panel and dialogs already do.
* fix(dashboard): act once on a held Enter or Space in Apps
Holding Enter on an Apps folder opened it, moved focus to its first app,
and the key's repeats then launched that app; held on the "+" tile, the
repeats picked "Browse the App Center" in the dialog it opened, and held
in the search box they launched the first match again and again. Key
repeats now do nothing on a tile, in the search box or on the add-app
dialog's options.
* fix(dashboard): don't blank the Apps grid when it re-flows on resize
When a resize changed how many columns or rows fit (resizing the window,
collapsing the sidebar, zooming, an Android keyboard), the grid was
rebuilt behind the first load's fade, which waits on page one's icons.
With an icon host that was slow or unreachable the grid went blank for
up to 1.5s each time. A grid already on screen now re-flows at once;
one still loading keeps its fade.
* fix(dashboard): open an app from the add-app dialog at once during a search
"Browse the App Center" and "Build with AI" play an intro from the
app's tile, and wait up to 3s for that tile to appear. With a search
that leaves the app out (the case the "+" tile stays for: a search that
found nothing), the tile never appears, so the app opened only after the
full 3s. The intro now gives up as soon as the search is what hides the
tile, and the app opens straight away.
* fix(dashboard): make the Apps search's clear control a button
The "×" that clears the Apps search was a bare SVG with a click handler:
Tab couldn't reach it, screen readers had nothing to announce, and on a
phone it was a 16px target inside the field. It is now a labelled button
after the field in the Tab order, with a focus ring, and on touch it
hit-tests at 44x44 while keeping its look.
* fix(dashboard): tell screen readers when an Apps search finds nothing
Typing in the Apps search re-renders the grid silently, and the "No apps
match your search" line is drawn into it fresh each time, which screen
readers don't announce. A search that matched nothing gave no feedback
at all. A persistent status region now says so.
* fix(dashboard): keep keyboard focus on an Apps tile across a re-render
The grid is rebuilt wholesale whenever its data or size changes: the
refresh that follows opening the tab, a resize or zoom that changes how
many columns fit, an uninstall that fails. A keyboard user who had
arrowed onto a tile lost focus to <body>, so Enter did nothing and the
next arrow started over from the first tile. Focus now moves to the
same app's or folder's new tile.
* fix(dashboard): don't offer Change username to a temporary account
A temporary account's Account tab offered Change username, whose dialog
asks for an account password the account doesn't have: left empty it
said "All fields are required", and anything typed got a 403 from the
server, which refuses temporary accounts. The button is now left out
until the account is saved, as the Password card already is; saving it
re-renders the tab with the button.
* fix(dashboard): don't offer Change email to a team seat
A team seat's Account tab offered Change email, and after the user
filled in the new address and their password the server refused it:
"Your team set this address. Ask a team admin to change it." The Email
card now shows that note in place of the button, as the Username card
already does for seats.
* fix(dashboard): don't let a slow picture removal undo a newer picture
Saving a profile picture is ordered so an older save can't put its
picture back over a newer one, but Remove picture stood outside that
order. Clicking Remove on a slow connection and then saving a new photo
before the removal answered left the default avatar on screen, and
Remove hidden, while the account had the new photo. A removal now
yields to a picture saved after it.
* fix(dashboard): show placeholders in the Usage headers until they load
The Storage and Resources headers started out as " · used of " with the
numbers left blank, and stayed that way when reading the storage space
or the month's usage failed. They now start at "--% · -- used of --",
as Home's cards start at "--", and keep that if the read fails.
* fix(dashboard): write Home's trial dates in the dashboard's language
The free-trial note on Home formats its dates with the browser's
language, not the one chosen in Puter, so with Puter in French and the
browser in English it read "…le Mar 5", and the other way round "First
charge on 5 mars". The dates now follow the dashboard's language. The
notification panel's mapping of Puter's language codes to Intl tags
(Brazilian Portuguese, Ukrainian, Traditional Chinese) moves to
i18n/intlLocale.js so both use it.
* fix(dashboard): write credit and dollar amounts in the dashboard's language
Credits were always formatted with English separators and dollar amounts
with "$" and English separators, so in German Home read "5,000
monatliche Credits", which a German reader takes as five, and Usage
showed "2.5" and "$1,234.50". Both now use the dashboard's language
("5.000", "2,5", "1.234,50 $"); English is unchanged.
* fix(dashboard): say why Create token is off where everyone can read it
When the account's email isn't confirmed, Create token is disabled and
the reason ("Verify your email address to create an API token.") lived
only in a hover tooltip: a disabled button isn't reachable by Tab, a
phone has no hover, and screen readers don't read a plain span's title,
so those users met a dead button with no explanation. The reason now
replaces the card's description while the button is off. The tooltip,
which encoded the already-encoded text again, now uses it as is.
* fix(dashboard): announce that a new API token is shown only once
After a token was created, focus moved to Done and a screen reader read
"Done, button" and nothing else: the done state arrives already filled
in a status region, which isn't announced, and Done is described by the
message only for plain-text results. The token dialog's warning ("Copy
this token now — it won't be shown again…") now describes Done, so it
is read out when focus lands there.
* fix(dashboard): show an email change confirmed in another tab
Confirming a change of email from its link sets the new address and
marks it confirmed, but sends no socket event, unlike confirming a code.
Back in the dashboard the user was re-read on returning to the browser
tab, yet nothing redrew: Account kept the old address under the
username, Create token stayed disabled and Security had no 2FA card
until a reload. Account and Security now redraw after that re-read when
the address or its confirmation changed.
* fix(dashboard): close the share dialog after leaving a share
Someone the owner let share could remove their own row in the share
dialog to leave. The removal went through, but the dialog then reloaded
its access list with the access just given up: the server refused it,
the success line gave way to "Subject does not exist" over an empty
list, and the item stayed in the Shared view until a reload. Leaving
now closes the dialog and refreshes the folder on screen, which drops
the item, as "Remove from Shared" does.
* fix(dashboard): say the access list couldn't load, not that sharing failed
When the share dialog couldn't read who has access (a network error,
which carries no message of its own), it said "Could not share this
item." though nothing had been shared or attempted. It now says "Could
not load who has access."
* fix(dashboard): don't pull focus back after a share change saves
When a change in the share dialog finished saving (a level change, Add
to all, a removal, a share), focus was put back on that row's control or
the add field, wherever the user had gone meanwhile. Someone who changed
a person's level and then started typing a name had the next keystrokes
land on that person's level select, where a matching letter picked
another level and granted it. Focus now goes back only when the save
took it away; focus the user moved elsewhere stays there.
* refactor(gui): move the localized time formatting to i18n/formatTime.js
formatRelativeTime and formatAbsoluteTime lived in the notification
center's module; Files and Properties are about to use them too.
* fix(dashboard): write Files and Properties dates in the dashboard's language
The Files tab's Modified column and Properties' Modified, Created and
version times came from timeago, which has no language but English
registered, so a German dashboard read "3 hours ago" beside "Geändert".
They now use the same localized formatter as the notification panel
("vor 3 Stunden"), which also gives a date past a week rather than
"3 weeks ago". Its formatters are now made once per language, since a
listing formats one date per row.
* fix(dashboard): style the Usage table's Show less button in dark mode
The button's dark variant was written for an `html.dark-mode` class that
nothing sets, so in dark mode it kept its light look: grey text at 3.4:1
on the dark card, a light border, and a light chip on hover. Its rules
move under prefers-color-scheme, as the table's fade overlay already
did.
* fix(dashboard): show the Files breadcrumb separators in dark mode
The chevrons between breadcrumbs are a black stroke at 20% opacity,
which vanishes on the dark header: a nested folder read "Home Documents
Work" with nothing between the names. In dark mode they are now
inverted, like the toolbar's icons.
* fix(dashboard): show the website-link badge on dark Files tiles
In grid view a file inside a published folder carries a link badge: a
black glyph on a disc of the page's background color. In dark mode that
is black on near-black and can't be seen. The badge now gets the white
disc the shortcut and worker badges already have.
* fix(dashboard): skip disabled Back, Forward and Up when tabbing in Files
The Files header's arrows stayed in the Tab order while disabled, drawn
at 10% opacity, which takes their focus ring with them. Tabbing into
Files, the first two stops (Back and Forward, disabled on arrival)
looked like nothing had focus. A disabled arrow now leaves the Tab
order, as a disabled button does, and returns once it can be used.
* fix(dashboard): give the Delete account button an AA-contrast red
The Account tab's Delete account button used the desktop's danger red
(#f00808), which puts its white label at 4.4:1, under the 4.5:1 that
WCAG AA asks of text. It now uses the dashboard dialogs' danger red
(#d90707, 5.3:1) and their darker hover, so the two match.
* fix(dashboard): label collapsed sidebar items for keyboard users too
With the sidebar collapsed, each item shows only its icon, and its name
appeared in a tooltip on mouse hover alone. Tabbing through the sidebar
showed a row of icons with no names. The tooltip now also shows while
an item has keyboard focus.
* fix(dashboard): keep Share and Properties inside the visible screen
Both dialogs capped their height at 85vh (88vh as phone sheets), and vh
is the viewport with the browser's bars hidden. With the bars showing,
on a phone in landscape say, the card plus the overlay's padding was
taller than the screen, and the overlay centers without scrolling: the
title and the buttons were cut off with no way to reach them. Each card
is now also held within its overlay, as the dashboard's dialogs are,
and its body scrolls instead.
* fix(dashboard): outline the off state of the 2FA switch
Off, the switch was a light grey track (#e0e0e0) with a white thumb,
1.3:1 against a white card and 1.2:1 against the amber card the 2FA
toggle sits on while 2FA is off, so the control could barely be seen
where it matters most. WCAG asks 3:1 for a control's boundary. The off
track now carries a 1px slate outline (4.3:1 on the amber card); the
on state is unchanged.
* fix(dashboard): make the keyboard focus ring visible on sidebar, tiles and lists
The sidebar items, the Files folders, crumbs and arrows, the app tiles,
Home's cards and recent apps, the notification rows and the Usage sort
buttons show keyboard focus with a 2px outline and nothing else, drawn
in --select-ring: the selection color at 40% (50% dark), about 1.6:1
against the surfaces it sits on. Keyboard users could hardly tell where
focus was; a focus indicator needs 3:1. Those outlines now use the solid
selection color (3.7:1 on white), as the switch and pager dots already
do. Field halos, which come with a colored border, are unchanged.
* fix(dashboard): bring text in the selection blue up to AA contrast
The selection blue is 3.7:1 against white, and a few places set text in
it or white text on it, under the 4.5:1 that text needs: the active
folder in the Files sidebar, the share dialog's "Add to all" link, the
add-app dialog's Send button, the notification count badge, the drag
count badge, and a breadcrumb whose menu is open. They now use the same
hue darkened to 45% (5.3:1; a lighter one for text in dark mode), from
two new tokens, --select-text and --select-fill.
* fix(dashboard): give the Apps page dots a 24px touch target
The Apps pager's dots, and a folder's, are 17px buttons side by side,
under the 24px a target needs when it has neighbors, so on a phone or
tablet a tap meant for one page often opened the next. On a touch
screen each dot is now 24px around the same 7px dot; mouse layouts are
unchanged.
* fix(dashboard): return from a drag-opened folder while it is still loading
Hovering a dragged file over a folder springs it open. Cancelling the
drag (Escape, the Cancel zone, or a drop outside the listing) is meant
to go back where the drag started, but while the sprung folder was still
loading the return was dropped like any navigation during another, and
the user was left in the folder they had backed out of. The return now
takes over from that load.
* fix(dashboard): drop into a drag-opened folder while it is still loading
When a dragged file springs a folder open, the drop anywhere in the
listing moves it into the folder now shown. Until that folder's listing
arrived, though, the Files tab still counted the folder the drag left as
the one on screen, so a drop in that time was taken as a move to where
the file already was and did nothing. It now goes to the folder being
opened.
* fix(dashboard): say "Incorrect password" when the account password is wrong
The account dialogs showed the server's message as is. A wrong current
password in Change password read "Password mismatch", in English in
every language, beside a dialog that says "New Password and Confirm New
Password do not match" when those two differ, so users corrected the
wrong fields. A wrong code read "Incorrect code." and too many attempts
"Too many requests.", also always in English. These now show the
translated messages the GUI already has, and a wrong password puts the
status on the password field, focused for retyping.
* fix(dashboard): don't send an account change to the value it already has
Change username with the account's own name got "This username is
already taken." and used up one of the hour's password attempts. Change
email with the current address was accepted: it mailed a confirmation
and a change notice to the same inbox, and following the link unlinked
any sign-in provider. Change password to the current password signed
out every other session and mailed a "password changed" notice. Each
dialog now says the value is already the account's and sends nothing.
* fix(dashboard): ask for the new password after a provider-only account sets one
An account that signs in only through a linked provider can set a
password with Change password, after which the server treats it as a
password account. This session's copy still said provider-only, so
Change username, Change email and Delete account went on hiding the
password field and sending the user through the provider's popup until
a reload. The copy now changes with the password.
* fix(dashboard): let Escape cancel a session rename without closing Manage sessions
In Manage sessions (Security), Escape in a session's rename field
cancelled the rename and then closed the whole modal, and Escape in the
search box closed it too, search and all. Escape now cancels the rename
or empties the search, and only an Escape with neither closes the
modal.
* fix(dashboard): show the server's message when a session can't be revoked
Manage sessions put a refused request's raw response body in its alert,
so revoking a session already signed out from another tab read
{"message":"Session not found","code":"not_found"}, and the stale row
stayed listed; a failed rename and "Revoke all other sessions" did the
same. The alerts now show the message itself, and a session found gone
reloads the list.
* fix(dashboard): show 2FA as it is when its dialog closes without success
The Security tab's 2FA toggle assumed nothing had changed whenever its
dialog closed without success. With 2FA turned on in another tab, the
setup here refused ("2FA is already enabled."), the toggle went back to
off, and every retry got the same refusal, with Disable never offered;
a code accepted just as the user closed the setup dialog left the same
state. The tab now re-reads the account and shows its real 2FA state.
* fix(gui): leave Ctrl/Cmd+Z to the text field being typed in
Ctrl/Cmd+Z ran the file Undo wherever focus was, and cancelled the
field's own text undo. Typing a new name (F2) or anything in another
field and pressing it undid the last file action instead; when that was
an upload, the uploaded file was deleted for good. Undo now leaves text
fields alone.
* fix(gui): let Escape on a context menu close only the menu
Escape removed any open context menu and then went on to the Files tab's
own Escape handling, which, finding no menu left, cleared the selection
and closed the image preview. Select three files, open their menu,
press Escape: the menu closed and the selection was gone. When Escape
closes a menu, nothing else now acts on it; a second Escape clears the
selection as before.
* fix(dashboard): close the Files image preview when an app opens over it
The image preview sits above every window, and only a double-click
closed it on the way to an app. Opening the image with Enter, or with
Open or Open With from its menu, started the app underneath the
preview, which went on covering it while keyboard focus moved into the
app, so Space and Escape no longer reached the preview. It now closes
whenever an app window comes on screen.
* fix(dashboard): close the Files image preview when its file goes away
Deleting the previewed image (the Delete key, the menu, the phone
selection bar), moving it, or having it removed from another tab took
its row out of the listing but left the preview up, still showing the
image. The preview now closes with its row; a refresh of the folder,
which redraws the row, keeps it.
* fix(dashboard): download one selected file as itself from the phone selection bar
In select mode, the floating bar's Download zipped whatever was
selected, so a single photo arrived as "photo.jpg.zip" where its own
menu's Download gives "photo.jpg". One selected file now downloads as
itself; folders and several items are still zipped.
* fix(dashboard): don't offer New Folder, Upload or Paste in a view-only share
Inside a folder shared with the user to view only, the Files tab still
showed New Folder and Upload, offered New and Paste in its menu, and
took files dropped on the listing or on a folder in it; each then
failed: an upload window ending in an error, or a new folder row with
its name field open, then taken back with a Forbidden alert. Those are
now left out there, as in Trash. A share whose level isn't known yet
stays as before, the server deciding.
* fix(dashboard): move through Files with Home, End, Page Up and Page Down
The Files listing took the arrow keys but not Home, End, Page Up or Page
Down, and as the listing itself never has focus the browser didn't
scroll it on them either: in a folder of hundreds of items the keyboard
could only step through them one row at a time. Home and End now select
the first and last item, Page Up and Page Down move a screenful, and
Shift extends the selection as with the arrows. With a menu open they
are left to it, as the arrows are.
* fix(dashboard): apply the hidden-files setting to a renamed Files row
With Show hidden off, renaming notes.txt to .notes.txt left the row in
the listing until the folder was next loaded, and with it on the row
wasn't dimmed as other dot-files are; renaming .env to env left it
dimmed. A rename made in another tab did the same. A renamed row now
follows the setting as listing the folder would.
* fix(dashboard): open a recent app once on a double-click
Double-clicking an app under Home's "Recently used" opened it in two new
browser tabs, one per click. The second click of a double-click is now
ignored, as on the Apps tab's tiles.
* fix(dashboard): don't say "No recent apps yet" before Home's list has loaded
Home's "Recently used" card was drawn from the list as it stood when the
page opened, which is empty until the request answers: every visit
first read "No recent apps yet / Apps you use will appear here" and
then swapped in the apps, and if the request failed the card kept
saying there were none. It now stays blank until the list arrives, and
a first load that fails says the apps couldn't be loaded; a list
already shown stays when a later refresh fails.
* fix(dashboard): drop "Save session" when the account was saved in another tab
A temporary account saved in one browser tab stayed temporary-looking
in its other dashboard tabs: Home kept its "Save session" button, which
opened Save Account for an account already saved, and Account and
Security kept their temporary-account layout. Coming back to such a tab
re-reads the account; that now removes the button and redraws the two
tabs when the account is no longer temporary.
* fix(dashboard): let go of the phone drawer when the window widens
With the sidebar open as a drawer below 768px, widening the window past
it (an iPad turned to landscape) drew the sidebar as the desktop one but
left it marked open: Tab stayed trapped in it, so the content couldn't
be reached by keyboard, and the Apps grid ignored the arrow keys, until
an Escape or a click in the content. The drawer now closes when the
window widens, leaving focus where it is.
* fix(dashboard): don't let a #files/<path> link pull Files back to its folder
Files doesn't keep the folder on screen in the URL, but a link like
/dashboard#files/alice/Documents stayed in the address bar once opened.
After the user moved on to Pictures, went to Home and pressed Back, the
browser returned to that link and Files jumped back to Documents; a
reload did the same, and Files' own Back/Forward lost track, as the jump
wasn't recorded in it. The link's path is now consumed once opened, as
a share link's is, and a folder opened from such a link is a step in
Files' history.
* fix(dashboard): close the drawer and Files' dialogs on browser Back and Forward
Browser Back or Forward switched tabs but left whatever was open on
screen: on a phone, Android's Back changed the tab under the open menu
drawer and left it open; in Files, the Share or Properties dialog
stayed up over Home, still acting on Files rows; an open context menu
stayed too. These now close with the tab, as with a sidebar click.
* fix(dashboard): fill Home's storage and usage meters without waiting on the plan
Home read the plan first and only then asked for storage and the month's
usage, so every visit paid for one more round-trip before either meter
filled in. The plan request had no timeout either: one that never
answered kept both meters at "--" and, as later loads wait for the one
in flight, held every later refresh of the cards for the rest of the
session. The three now load side by side, and the plan read gives up
after 15 seconds.
* fix(dashboard): link Home's card headers to their tabs
The headers of Home's cards (Recently used, Usage, Your Plan, Your
Storage, Resources) linked to "#", so opening one in a new browser tab
(middle-click, the browser's menu) showed Apps rather than the tab it
names, and Cmd/Ctrl+click switched tabs in place. They now link to the
tab they open, and a modified click is left to the browser, as on the
sidebar.
* fix(dashboard): prefill the username when saving a session from Home
Home's "Save session" button opened Save Account with an empty username,
so a temporary user had to make one up, while the same action in the
user menu fills in the account's current name and starts at the email
field. Both now open it the same way.
* fix(dashboard): measure Home's storage meter by the amount it shows
On a self-hosted install the storage card names the disk's use (Puter's
files and everything else on it) but filled its meter, and gave its
percentage, from Puter's files alone, so it could read "93 GB used ·
0% of 466 GB". The meter and percentage now come from the same amount
the card shows.
* fix(dashboard): refresh Home's recently used apps on returning to the tab
Recent apps open in a new browser tab, and coming back to the dashboard
refreshed the usage cards but not "Recently used", whose comment said
it followed the same triggers: the app just opened only moved up the
list after switching away from Home and back. Returning to the tab now
re-reads the list too.
* fix(dashboard): leave IME keystrokes to the IME in Apps
Typing Japanese or Chinese in the Apps search or a folder's name, the
keys that drive the input method reached the tab's own handlers:
ArrowDown to pick a candidate moved focus to the first tile and cut the
conversion short, Enter to confirm one named the folder half-written or
launched the first match, and Escape put the old name back. The search
box's Enter meant to skip composition, but read isComposing off jQuery's
event, which never carries it. Keys during composition are now left to
the IME.
* fix(dashboard): leave IME keystrokes to the IME in the share recipient field
With a Japanese or Chinese input method on, even a Latin username is
composed, and the share dialog's recipient field took the keys that
drive it: the arrows moved through its suggestions instead of the IME's
candidates, and Enter to confirm the text picked a suggestion instead.
Keys during composition are now left to the IME.
* fix(dashboard): re-read the Apps layout on returning to its browser tab
The Apps tab read its order and folders only when it was opened, and
saves write its whole copy of them. With the dashboard open in two
browser tabs, a folder made in one was wiped as soon as the other,
showing Apps since before, changed anything (a reorder, a new folder, a
rename), as was the order arranged in the first. The tab now reads the
layout again when its browser tab comes back into view.
* fix(dashboard): undo a drag out of an Apps folder when the drag is cancelled
Dragging an app past the edge of an open folder takes it out, closes the
folder and carries the drag on over the grid, and the removal was saved
right then. Pressing Escape, or the window losing focus, cancels the
drag but left the app out; out of a two-app folder that dissolved the
folder for good, its name with it (dragging the app back made a new
"Folder"). A cancelled drag now puts the folder and the order back.
* fix(gui): show the 2FA setup's confirmations without entities
The 2FA setup window, which the dashboard's Security tab opens, encoded
already-encoded translations for its labels, so in French the two
checkboxes before enabling read "J'ai enregistré mes codes…" and
"Je suis prêt à activer l'A2F". The labels, and the window's other
translated text set the same way, are now encoded once.
* fix(gui): don't leave the 2FA dialogs stuck when a request can't be sent
Turning 2FA on or off from the dashboard's Security tab while offline,
or on a dropped connection, left the dialog busy for good: enabling kept
its spinner up with the code boxes disabled, and disabling kept its
button and password field disabled, with nothing said either way. A
request that gets no answer is now reported like a refused one, and the
dialog can be tried again.
* fix(gui): stop disabling 2FA when the provider sign-in doesn't happen
For an account that signs in through a linked provider, turning 2FA off
opens the provider's sign-in popup. When the popup was closed or
blocked, the dialog showed why for a moment and then sent the request
anyway, whose refusal ("OIDC revalidation required") replaced the
reason. It now stops at the popup's error.
* feat(ai): MiniMax video generation (H3 and Hailuo)
Adds a minimax-video-generation provider to the video driver. H3 models go
through MiniMax's v2 task API and are billed per second of output; Hailuo
models go through the v1 API, exchange a file id for a download URL, and
are billed per clip. The shared `minimax` chat key is reused, with the
chat block's `/v1` base URL reduced to its host.
WIDTHxHEIGHT sizes now map onto tiers for catalogs that include a 2k or
4k tier.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
* fix(ai): validate MiniMax video inputs and resolution tiers
---------
Co-authored-by: Claude Fable 5.1 <[email protected]>
* fix(dashboard): render in the user's saved language
The dashboard never read the account's preferences: only the desktop did,
on boot. Everyone saw it in English whatever language they had chosen,
until the Files tab's Show hidden toggle switched a running session over,
to the browser's language when none was saved, since that was the
fallback the toggle wrote back.
The desktop's preference loading moves into load_user_preferences, which
the dashboard now runs in the background. The first paint uses the
language this browser last loaded, so nothing waits on the read; a saved
language that differs reloads into it, and a changed Show hidden setting
refreshes the open folder. The tab names are read when the sidebar is
drawn rather than when the modules load. A failed read keeps the cached
preferences instead of resetting them to English.
* fix(dashboard): label credit amounts with a key meant for them
Home's allowance and the Usage tab's total and Credits column used the
`credits` key, which the translations render in its acknowledgments sense:
"5,000 Mitwirkende" (contributors) in German, "Авторы" in Russian,
"特别鸣谢" in Chinese. They now use `usage_credits`, which falls back to
English until it is translated, as `monthly_credits` already does.
* fix(dashboard): enable the token and 2FA cards once the email is confirmed
The dashboard had no handler for the `user.email_confirmed` socket event,
and Account and Security pick the token button's state and whether to
offer 2FA when they render. A user who confirmed their email in another
tab, or in this one through the confirmation prompt, kept a disabled
"Create token" and no 2FA card until a reload.
The dashboard now refreshes the user on that event and renders both tabs
again, as it already does after a temporary account is saved.
* fix(dashboard): save only the profile fields that were edited
Edit profile sent both the display name and the bio on every save, taken
from this session's copy of the profile. That copy comes from the cached
user and can be stale (the profile changed on another device) or empty
(the profile read failed), so changing only the bio wrote the old display
name back, and a save from an empty prefill erased the bio.
The dialog now sends just the fields whose value changed from what it
opened with, and closes without a request when nothing did.
* fix(dashboard): don't show storage as 100% while there is room left
Home and Usage rounded the storage share to a whole percent, so an
account at 99.5% or more read "100%" while uploads still fit. The usage
meter already holds at 99% until the allowance is spent; that rule moves
into meterPercent and the storage meters use it too.
* fix(dashboard): keep keyboard focus inside the open phone drawer
Below 768px the sidebar is a modal drawer over a scrim, but opening it
left focus on the menu button, and Tab past its last entry walked into
the dimmed content behind the scrim. Opening it now focuses the current
page's entry, and Tab and Shift+Tab cycle within it while it is open.
* fix(dashboard): tapping into a Files name field edits the name
On a phone or tablet, tapping the name field of a new folder or a rename
(which iOS needs before it shows the keyboard) reached the row's tap
handler, which opened the folder or launched the file and threw the edit
away. A long-press in the field opened the touch sheet instead of
selecting text, and on desktop a right-click in it showed the file menu
instead of the browser's Cut/Copy/Paste.
The row's tap and menu handlers now leave the name field alone.
* fix(dashboard): don't offer Cut on items the user can't move
A file's menu offered Cut on anything that wasn't immutable, and Shared
rows aren't marked immutable. Cutting a file someone shared with you, or
anything inside a read-only shared folder, then pasting it, ended in a
"Forbidden" alert and an emptied clipboard. Cut now needs the same
permission as Delete in that menu, as Ctrl+X and the selection's Cut
already do.
* fix(dashboard): don't paste or upload into the folder being left
Opening a folder clears the listing at once but only moves currentPath
when the new listing arrives. Ctrl+V, a file dropped from the computer
onto the pane, or Paste from the background menu during that wait went
into the folder the user had just left, and since the refresh then
showed the new one, the items seemed to vanish.
Those three now refuse while another folder is loading, as New Folder
already did.
* fix(dashboard): clear the drop highlight when Escape cancels a drag
Escape ends a Files drag with a synthetic mouseup, which jQuery UI
treats as a release outside every target: it fires no `out`, so the
folder row under the pointer kept its dashed drop outline and tint (and
a sidebar folder or breadcrumb its highlight) after the drag was gone.
The Escape branch now takes those off.
* fix(gui): show the "can't rename in Trash" alert without entities
Pressing F2 on a trashed item (on the desktop or in the dashboard's
Files tab) showed "This item can't be renamed because it's in
the trash": the message was encoded by i18n and then again by UIAlert.
* fix(gui): show the failed-upload title without entities
The upload progress window writes its error title with innerText, but
was handed the HTML-encoded i18n string, so French showed "Échec de
l'importation des fichiers". The Files tab's two upload paths and
the desktop's now pass the plain string.
* feat(dashboard): open a Files row's menu with the Menu key or Shift+F10
Share, Download, Open With and Properties were reachable only by
pointer: the ⋯ button isn't focusable, and the keyboard's menu keys
fired a contextmenu on <body>, which the listing ignores. Both keys now
open the selection's menu at its row's ⋯ button, where arrow keys and
Enter already work.
* fix(dashboard): let Shift+Arrow shrink a Files selection
Shift+Arrow only ever added the next row, so after Shift+Down twice,
Shift+Up left all three rows selected instead of going back to two. A
run of Shift+Arrows now selects the range from the row it started on to
the cursor, on top of whatever was selected before the run, so moving
back shrinks it. A click or a plain arrow starts a new run.
* fix(dashboard): name folders in the Back/Forward history menus as the crumbs do
Holding Back or Forward listed each folder by its path's basename: `/`
was a blank entry, the Shared view read "shared", Trash stayed in
English, and a trashed folder showed its uid. The menus now use the same
names the breadcrumbs show.
* fix(dashboard): show a shortened Files name in full on hover
Grid tiles and a resized Name column shorten long names in the middle
("Quarterl…draft v2.xlsx"), and nothing showed the rest short of opening
Rename or Properties. A shortened name now carries the full one as its
tooltip.
* fix(dashboard): keep keyboard focus on the Files breadcrumbs
Every listing rebuilds the breadcrumbs, which took a keyboard-focused
crumb with it: pressing Enter on one, or any refresh of the folder while
a crumb had focus, left focus on <body>, and the next Tab started over
from the top of the page. Focus now moves to the same folder's crumb,
or to the one for the folder just opened.
* fix(dashboard): reach Home's Shared and Trash rows from the keyboard
At 480px wide or less (a phone, or a desktop browser zoomed in) the
folder sidebar is hidden and Home lists Shared and Trash as rows instead.
Those rows only had a click handler, so a keyboard user couldn't get to
either. They are now focusable links that open on Enter or Space, with
the sidebar's focus ring.
* fix(dashboard): keep the Files selection across a sort or view change
Sorting by a column, switching between list and grid, or toggling Show
hidden lists the folder again, and the rebuild dropped the selection and
the shift anchor: select three files, sort by Size, and nothing was
selected. Only the refresh on returning to the browser tab carried them
across. That logic is now refreshKeepingSelection, and those three use
it too.
* fix(dashboard): don't drop a folder open during a Files refresh
A refresh of the folder on screen (after an upload or paste, Refresh, a
sort, or returning to the browser tab) set the same "already rendering"
flag that a navigation sets, so double-clicking a folder, a sidebar
folder, a crumb or Back during that round-trip did nothing, with no
spinner to explain it.
Opening another folder now takes over from a refresh in flight; the
refresh notices it was superseded and drops its result. A navigation
during another navigation is still ignored, as before.
* fix(dashboard): keep the Files marquee when an item arrives mid-drag
Adding a row clears the empty-folder notice by removing every non-row
child of the listing, and the selection marquee is one. A file added
from elsewhere (an upload, another tab, an app) while the user was
drawing a selection made the rectangle vanish under the pointer.
* perf(dashboard): don't rewrite unchanged Files names while resizing
Every width change (a window resize, collapsing the sidebar) re-fits the
item names, at most once a frame, and wrote each name's text back even
when it came out the same. Each write invalidated layout for the whole
list. With 300 rows that took ~6.4ms a frame in list view and ~4.9ms in
grid; skipping the unchanged writes brings it to ~0.7ms and ~3.2ms.
* fix(dashboard): tell assistive tech the Files Select toggle's state
The Select button only toggled a class, so a screen reader announced a
plain button with no state; it now carries aria-pressed. Sort and View
open menus and now say so with aria-haspopup.
* fix(dashboard): show a person's strongest grant in the share list
When someone held two grants on one item (the owner gave them view
access, and someone the owner let share gave them edit), the share
dialog showed whichever grant the listing returned first, so their row
could read "Can view" while they could edit. A second grant on the same
item now counts toward the row with the stronger of the two levels.
* fix(dashboard): only offer share controls on grants the user can change
The backend lets an item's owner change or withdraw any share of it,
and anyone else only the grants they issued (or their own access). The
share dialog offered the level select and Remove on every row. Someone
the owner let share who removed a person the owner had added got
"Removed bob" while nothing changed, and lowering their level added a
second grant that changed nothing either.
The access list now records who issued each row's grants. A user who
doesn't own the selection gets the controls only on rows whose grants
they issued all of, plus Remove on their own row to leave; other rows
show their level as a tag.
* fix(dashboard): update Files' shared markers after the share dialog closes
The share dialog marks the Files rows it covers as shared or not from
the listings it reloads after each change, and skipped that whole reload
once it was closed. Closing it while a share or removal was still saving
left the row without its shared marker (or with a stale one) until the
folder was reloaded. The markers are now updated either way; only the
dialog's own list is skipped once it's gone.
* fix(dashboard): mark rows shared after sharing more than 50 at once
The share dialog updates the Files rows' shared markers from the share
listings it reloads after a change, and doesn't reload them for more
than 50 items. Sharing such a selection, with a person or by link,
reported "Shared with bob on 55 items" while no row showed the marker
until the folder was reloaded. Those grants now mark their rows
directly.
* fix(gui): unbind each context menu's mousemove handler with the menu
The submenu-aim code bound a mousemove handler on the document for every
menu and submenu and never removed it. Each one kept its closed menu and
items alive and ran on every mouse move for the rest of the session; ten
right-clicks in Files left five such handlers behind. The handler now
comes off when its menu is removed. Moving diagonally into a submenu
still keeps it open.
* fix(gui): ignore clicks on a context menu's dividers
A divider is an <li> like the items, so a click on one (they're 11px
tall, easy to hit between two items) ran the item handler with no
action behind it and threw "Cannot read properties of undefined". The
item handler now skips dividers; the menu stays open, as a native
menu's separator does.
* fix(dashboard): warn that removing a team removes everyone in it
Removing a team from a single item's share dialog asked "Remove Design's
access to this item?", the wording used for one person. The desktop's
share window adds "Everyone in the team loses it."; the dashboard now
uses that confirmation for teams too.
* fix(dashboard): count folders, not items, in "via N folders"
A person who reaches a multi-item selection through more than one shared
ancestor gets a "via N folders" note in the share dialog, and N was the
number of items reached that way: five files under two shared folders
read "via 5 folders". It is now the number of distinct folders.
* fix(dashboard): don't treat a long tail after a dot as a file extension
Files middle-truncates long names and keeps everything after the last
dot whole as the extension. For "Report v1.2 final draft for the board
meeting" that kept ".2 final draft for the board meeting", so the tile
read "….2 final draft for the board meeting" and lost the start of the
name. Only a short tail without spaces now counts as an extension; this
one shortens to "Report v1.…d meeting".
* fix(dashboard): keep Tab inside the touch context menu
The touch menu sheet is modal, but Tab and Shift+Tab left it for the
page behind the backdrop while it stayed open; closing it then no
longer returned focus, since focus was elsewhere. Tab and Shift+Tab now
move between its items like the arrow keys, wrapping at the ends.
* fix(dashboard): say "the other item" when one item is missing a grant
The share dialog's "Add to all" link told screen readers "Give bob
access to the other 1 items" when the person was missing from a single
item of the selection. That case now has its own singular string.
* fix(dashboard): announce a failed Properties load, on both tabs
When Properties couldn't read the item, the General list showed the
error but stayed aria-busy, so screen readers kept it unannounced, and
the Versions tab stayed blank. The list is no longer busy once the
error shows, and Versions shows the same error.
* perf(dashboard): launch the add-app modal's apps without reloading the grid
"Browse the App Center" and "Build with AI" go through the same intro
as a deep link, which first awaited loadApps(). With the grid already
loaded that started a fresh fetch of every app list and the saved
layout, and the launch waited on it: with an 800ms connection, ~1.35s
before anything opened instead of ~0.1s. The intro now uses the grid
already loaded, and only joins or starts a load when there is none.
* fix(dashboard): don't hide the Apps grid on every search keystroke
Search re-rendered the grid behind the first load's fade-in, which waits
for page one's icons. Each keystroke made fresh <img> elements, so an
icon that was slow or failing (an unreachable icon host) blanked the
whole grid until it settled, about a second per keystroke with a 1s
icon and up to 1.5s if it never answers. Search, its clear button and
entering reorder mode now render the results at once.
* fix(dashboard): stop the Apps pager's dots jumping back mid-flip
A page arrow, a dot, or the wheel starts a smooth scroll and marks the
target page at once, but the scroll handler then read the pages passed
over on the way as the current one. The active dot went forward, back
to the old page, and forward again, and a second click on the arrow
added to the stale page: two quick clicks showed 0 → 1 → 0 → 2 → 1 → 2.
While such a scroll is on its way, the pager (and the open folder's)
now ignores the positions in between, until it arrives or a second has
passed. The user's own scrolling still moves the dots.
* fix(dashboard): keep paging while a dragged app is held at the edge
Holding a dragged tile still at the Apps grid's edge (or an open
folder's) turned one page and stopped: the next dwell only started on
another pointer move, so a mouse held steady stayed on the second page
of three. Once a flip settles, the dwell starts again if the pointer is
still in the edge zone.
* fix(dashboard): don't turn Apps pages on a trackpad pinch
A pinch on a trackpad reaches the page as wheel events with ctrlKey
set, and the Apps grid (and an open folder) read them as a wheel flick
and turned the page while the user zoomed. Those events are now left
alone.
The handlers also called preventDefault() from a listener the app makes
passive, which does nothing and logged a console warning on every wheel
tick; that call is gone, as the scroller has no vertical scroll to stop.
* feat(dashboard): open the first Apps search result on Enter
Typing in the Apps search and pressing Enter did nothing; reaching a
result took ArrowDown and then Enter. Enter in a non-empty search now
opens the first match (or a folder that matches), as launchers do. It
does nothing while an IME composition is open, or when nothing matches.
* fix(dashboard): include an open folder's page dots in its Tab cycle
The open folder keeps Tab inside it, but its list of stops left out the
page dots, which are buttons. Tab never reached them, and once one had
focus (clicking it focuses it) the next Tab walked out of the modal
folder to the page behind. The dots are now part of the cycle.
* feat(dashboard): open an app tile's menu with the Menu key or Shift+F10
An app or folder tile's menu (Open in New Tab, Copy Link, Uninstall,
Remove from Folder; a folder's Rename and Ungroup) opened only on a
right-click or long-press, and browsers don't all turn the keyboard's
menu keys into a contextmenu event (macOS has none). The Menu key and
Shift+F10 on a focused tile now open its menu at the tile, where arrow
keys and Enter work.
* fix(dashboard): keep keyboard focus on the grid after Ungroup
Ungrouping a folder from its menu re-rendered the grid without the
folder's tile, so a keyboard user who had it focused was left on
<body> and the next Tab started from the top of the page. Focus now
moves to the folder's first app, which takes the folder's place.
* fix(dashboard): give links AA contrast in the light theme
Link-colored text (Home's "View more" and "Upgrade", the notification
panel's "Mark all read" and "Retry", Properties' website links, the
token dialog's sessions link) used #5271ff, 4.07:1 on white and 3.97:1
on the content background, under the 4.5:1 AA minimum for text that
size. The light theme's link is now #3d5bd9 (5.7:1), with a darker
hover. Dark mode already passed.
* fix(dashboard): give success text AA contrast in the light theme
Success text (the 2FA "enabled" line, Home's active-plan badge, the
share dialog's confirmations) used #03933a: 4.01:1 on white and 3.80:1
on its green tint, under the 4.5:1 minimum. It is now #15803d (5.02:1
and 4.75:1); the success check icons that share the token darken with
it. Dark mode already passed.
* fix(dashboard): give danger buttons and error text AA contrast
White text on the red fills fell short of 4.5:1: the Apps uninstall
confirm (#e53935, 4.23:1), the delete-account button (#f00808, 4.43:1)
and the Files drag "Cancel" zone (#ef4444, 3.76:1). So did light-theme
danger text on its pink tint (#dc2626 on #fef2f2, 4.41:1), used for
form, share, crop and notification errors and the past-due badge.
The fills are now #d32f2f, #d90707 and #dc2626 (4.8:1 to 5.3:1), each
with a darker hover, and danger text is #b91c1c (5.9:1 on the tint).
* fix(dashboard): give the app feedback dialog's Send button AA contrast
The feedback dialog's primary button (Send, and Close once sent) put
white text on a light-blue gradient, 2.66:1 at the top and 3.42:1 at the
bottom. It now uses the dashboard's primary button colors, which meet
4.5:1 in both themes, like the dialogs around it.
* fix(dashboard): show the drop outline and dwell fill on grid folders
Dragging files over a folder in grid view only tinted it like a
selection: the grid's own border, hover and selected rules out-ranked
the shared drop-target and spring-load rules, and the hover rule's
background shorthand wiped the dwell fill. The folder then opened after
700ms with no sign it was about to. Grid and compact-grid folders now
get the list's dashed outline and filling dwell, with the padding
trimmed to match so the tile doesn't shift.
* fix(dashboard): keep the Files preview and drag ghost above the window
The Space-bar image preview (z-index 9999) and the drag ghost (10000)
are appended to <body>, beside the dashboard window. On a touch-only
tablet with a keyboard every window is pinned to 9999999, so the preview
opened invisibly behind it from the first press; on desktop the
window's z-index climbs with each click and overtakes both in a long
session. Both now sit in the band the sidebar tooltip and the toasts
already use.
* fix(dashboard): give small dashboard controls 44px touch targets
Several controls a phone or tablet user taps were under the 44px
minimum touch size, with nothing enlarging them on a coarse pointer:
the Files toolbar buttons (32px), the touch menu's rows (36px tall),
the drawer's close button (32px), the notifications close (30px), the
Properties close (32px), the feedback dialog's ✕ (30px), the add-app
Back arrow (26px), the Apps modal buttons (34px tall) and the share
dialog's Copy link (38px tall).
Following the earlier touch fixes, the icon buttons keep their look
and get a 44x44 hit area, and the text buttons and menu rows grow to
44px. Mouse and trackpad layouts are unchanged.
* fix(dashboard): keep a landscape phone's notch clear of the dashboard
A phone held sideways and wider than 768px (an iPhone Pro Max, a large
Android) gets the desktop layout, and the page asks for the full screen
with viewport-fit=cover. Nothing in that layout read the side safe-area
insets, so with the notch on the left the sidebar's icons sat under it
(x=24 against a 47px inset), and with it on the right the content's
edge and the toasts did.
The sidebar (open or collapsed) now adds the left inset, and the content
area, including Apps and Files, and the toasts add the right one. The
insets are 0 everywhere else, so other layouts don't change.
* fix(dashboard): size the touch menu and bottom sheets to the visible height
The touch context menu, the app feedback dialog and the profile-photo
crop sheet capped their height in vh. On phones 100vh is the viewport
with the browser bars hidden, so while they show these could be taller
than the screen. The touch menu, which ContextMenu.js keeps inside the
visible height, then ran its last rows off the bottom on a landscape
phone, and the bottom sheets could push their header off the top. They
now cap in dvh, as style.css already does.
* fix(gui): move keyboard focus into the Manage sessions dialog
The sessions dialog is modal but never took focus: opening it from the
keyboard left focus on the button behind the backdrop, and Tab walked
the page underneath instead of the session list. It now focuses its
close button on open, keeps Tab inside, and hands focus back to the
control that opened it when it closes.
* fix(dashboard): return focus after the Security tab's dialogs close
Closing Blocked people, or the 2FA setup or disable dialog opened from
the switch, left keyboard focus on <body>, so the next Tab started at
the top of the page. The 2FA switch also disables itself while its
dialog is up, which drops focus even before then. Focus now goes back
to the button or switch that opened the dialog once it has gone.
* docs: easy events recipe (PUT-1961)
* docs: catch-up-on-notifications events recipe (PUT-1961)
* docs: notification examples use notif:app-user, which apps can read
* docs: events recipe corrections from a run against a live server (PUT-1961)
* refine and update agents md
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
* fix(dashboard): close the Apps modals and folders only on a press that starts on the backdrop
The uninstall and add-app modals and the open folder closed on any click
whose target was their backdrop. Drag-selecting text in the app request
box and releasing outside the card lands that click on the backdrop, so
the modal and the typed request were thrown away.
The backdrop logic the dashboard dialogs already use moves into
bindBackdropDismiss, and the three Apps overlays use it too.
* fix(dashboard): double-clicking "Add an app" no longer opens App Center
The add-app modal opens under the pointer, so the second click of a
double-click on the "+" tile landed on its first option and launched App
Center (or the AI builder, depending on where the tile sat) without the
user choosing anything. An option now ignores the second click of a
double-click.
* fix(dashboard): act on an app tile once per double-click
A tile acted on every click, so a double-click opened an external app's
site in two browser tabs. Double-clicking an option in the add-app modal
also launched whichever tile sat under the pointer once the modal had
closed (App Center and Recorder together, say). A tile now ignores the
second click of a double-click; the first already launched, focused or
opened what was asked for.
* fix(gui): show app launch refusals in a Puter alert, translated
launchApp reported "You don't have access to …" and "Couldn't open …"
through window.UIAlert, which nothing defines, so both fell through to
the browser's native alert(): a blocking, unstyled, English-only dialog
over the dashboard or desktop. They now use UIAlert directly, with the
text in en.js, and pass the app title unencoded since UIAlert encodes
its message itself.
* fix(dashboard): clicking a toast with nothing to open keeps apps on screen
A toast click brings the dashboard forward before acting on the
notification, hiding every app window. Only share notifications lead
anywhere, so clicking an "events subscription ended" toast (or any other
type) to dismiss it minimized the app the user was working in and showed
a dashboard with nothing to look at. Those toasts now just mark the
notification read.
* fix(dashboard): show an emptied Trash as empty
Emptying the Trash from the Files tab took its rows away but left the
footer on "N items · X MB" and the pane blank, without the empty-folder
notice; the selection bar kept offering actions on rows that were gone.
Emptied from another tab, the listing was cleared with .empty(), which
also dropped the loading overlay and likewise never updated the footer.
Both paths now finish with the empty notice and a fresh footer.
* fix(dashboard): say a folder is empty when its last item goes elsewhere
When another tab, device or app deleted or moved away the last item in
the folder Files was showing, its row faded out and left a blank pane:
the item.removed and item.moved handlers updated the footer but never put
the "folder is empty" notice up. They now do, for rows that were in the
Files listing.
* fix(dashboard): list failed drag-and-drop uploads one per line
The upload-button path was fixed to put each failed item on its own line,
but files dropped onto the listing still joined them with "\n", which
UIAlert's HTML collapses into spaces: every failure ran together on one
line. Both paths now build the message in failedUploadsMessage.
* fix(dashboard): dropping items back into their own folder does nothing
Dropping a selection on the sidebar entry for the folder it came from, or
spring-loading into a folder and coming back to release in the listing,
asked move_items to move every item where it already was, and each one
stopped on a "Cannot move item to its current location" alert in turn.
The breadcrumbs already ignore such a drop; moveDraggedRows now leaves
those rows out too, and a drop with nothing left to move does nothing.
* fix(dashboard): a Ctrl- or Alt-drop on the Trash trashes the items
Ctrl-dragging a file onto the sidebar Trash (or a Trash breadcrumb)
copied it into the Trash: the original stayed put, and the copy carried
no original path, so it was offered Restore and Restore failed. Alt-drops
made shortcuts there the same way.
The four drop handlers' copy/shortcut/move choice moves into
dropRowsInto, which only ever trashes what lands on the Trash.
* fix(dashboard): the first row click after a marquee released outside Files counts
A marquee sets a flag so the click that ends it doesn't clear the new
selection; the listing's click handlers consume it. Released over the
sidebar or outside the window, that click lands elsewhere, the flag
stayed set, and it swallowed the user's next click on a row. The flag now
lapses once the release's own click has had its turn.
* fix(dashboard): Back and Forward follow a folder the user renamed
Open a folder, go back, rename it, then press Forward: history still
held the old path, so Files showed "This folder couldn't be opened", and
the Back/Forward long-press menus listed the old name. A folder renamed
in Files now rebases the history entries in and under it, using the
same path rebase the username-change handler does.
* fix(dashboard): a folder that can't be opened becomes the current folder
When a folder failed to list (deleted elsewhere, share revoked, offline),
Files said "This folder couldn't be opened" but stayed on the previous
folder underneath: history had moved on while the breadcrumbs, sidebar
highlight and New Folder/Upload/Paste still pointed at the old folder,
so a new folder or upload landed somewhere other than where the user
seemed to be.
The tab now moves to the folder it was asked for before showing the
message, and creates nothing in it until it lists again.
* fix(dashboard): double-clicking Save in the photo crop uploads it once
Save closes the crop dialog, but the dialog stays in the page for its
200ms fade-out with its handlers live, so the second click of a
double-click ran Save again and sent the profile picture to the server
twice. Save does nothing once the dialog has closed.
* revamp networking api with epoxy
* update to new epoxy build
* force wisp auth
* emit Error objects from socket 'error' events
main tightened the socket error contract to pass an Error (see
types/modules/networking.d.ts, which documents the reason as
`error.message`); the epoxy rewrite still emitted a bare string,
matching the older `(reason: string)` declaration.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* test: cover the epoxy-based networking client
Replaces the coverage lost when the wisp implementation was removed:
PSocket.test.js and PWispHandler.test.js were bound to PWispHandler,
parsers.js, and wispInfo, none of which survive the epoxy rewrite.
PSocket.test.js - connect/retry, inbound data, write normalisation,
close, and the TLS event remapping. Driven through
real ReadableStream/WritableStream pairs so
reader locking, cancel, and abort behave as they
do in the browser.
index.test.js - relay-token exchange (auth header, 401 re-auth and
retry, malformed responses) and the epoxy client
cache (keying, refresh, in-flight sharing).
requests.test.js - pFetch delegation, cache invalidation, and the
api call logger's request description.
epoxy.test.js - the hand-packed wisp password extension payload.
The wasm runtime loader is left to integration coverage; it needs a
network fetch and a browser. createPuterPasswordBuilder is exported so
the byte layout can be tested against an injected fake runtime.
One skipped test records a pre-existing defect: on a failed write,
#readLoop's normal-termination path races #closeStreams and emits
close(false) after an error.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* fix: report socket close flags and epoxy init failures accurately
PSocket #readLoop raced the teardown it was being torn down by. A failed
write sets #closing and hands the close event to #closeStreams, which has
to await reader.cancel() and writer.close() before emitting close(true).
That cancel resolves the loop's pending read with {done: true}, so the
loop broke, reached its own #emitClose(false), and set #closed first --
callers were told the socket shut down cleanly right after an error.
The loop now defers the close event whenever a teardown is under way, in
both its normal and its throwing path, and #closeStreams always emits.
getEpoxyClient swallowed every init failure and resolved undefined, so a
dead relay reached callers as "cannot read properties of undefined
(reading 'connect')" instead of its cause. It now re-throws, still
without caching the failed attempt. A socket reports "wasm unavailable"
or "Failed to create relay token (HTTP 503 ...)" and closes with the
error flag set.
Two related cache faults fell out of that rewrite: the in-flight
early-return ignored `refresh`, handing a caller the very attempt it
asked to replace, and it ignored the cache key, so an attempt started
before a token change satisfied a request made after it. Reuse is now
conditional on both.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* restore the public API surface dropped in the epoxy revamp
The epoxy rewrite kept the shape of the old networking client but lost
three things callers depend on:
- JSDoc on the exposed methods. Re-added on PSocket (constructor, on,
addListener, write, close), PTLSSocket and pFetch, along with the
SocketEvent typedef and a Networking type on netAPI. `on` carries the
TLS event aliasing docs that used to live on PTLSSocket, since that
behaviour moved here.
- socket.write's error message, which lost its trailing '!!'. Apps match
on the message, so it is restored verbatim.
- pFetch's client-side validation. Epoxy reports a bad request as an
opaque wasm value from deep inside the transport, so the scheme check,
the Content-Length/body check and the malformed-request TypeError are
made before a relay is dialled, rejecting with exactly what they
rejected with before. Validation builds its Request from a clone, or it
would consume the body epoxy is about to send.
The latter two are what the net API suite asserts on node, browser and
workerd, and it has been failing on all three since the revamp.
addListener takes named parameters so it can be typed, and three unit
tests that pinned pFetch's habit of forwarding unvalidatable input were
updated to the documented behaviour.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* update epoxy client to 04e4930
connectionPrefs changed shape: the handshake and its required extension
list are one object now rather than a tuple, and handing the new build
the old form throws part way through the handshake.
The bump is not optional. The previous build cannot reach the current
relay at all: it enforces the required puter password extension even when
a relay answers with a v1 CONTINUE, and fails with "Protocol extensions
not supported" -- which is what puter.cafe answers with today.
Verified against a local relay: fetch, POST bodies, https, raw sockets and
TLS sockets, the last exercising connectTls, whose third parameter became
an options object in this build.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* bump epoxy
* dont require ext
* chore(puter.js): update Epoxy runtime to 68c6904
* chore(puter.js): update Epoxy runtime to affd9f5
---------
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
* fix(dashboard): keep Escape working when two share or properties dialogs are open
Each share and properties dialog bound its document keydown under one fixed
namespace, so closing either instance unbound every instance's Escape.
Double-clicking Share… or Properties in the context menu opens two; after
the top one closed, Escape no longer closed the one left behind. Each dialog
now binds under its own namespace.
* fix(dashboard): don't close Properties when a text selection ends on the backdrop
Drag-selecting the path or UID in the properties dialog and releasing over
the dimmed backdrop closed the dialog: the click lands on the overlay when
press and release are on different elements. The backdrop now closes it
only when the press started there, as the share dialog already does.
* fix(dashboard): keep focus in Properties after disassociating one of several websites
With more than one website on an item, disassociating one removed the
focused button and returned early before refocusing the dialog, so focus
fell to the page and the next Tab landed in the dashboard behind the modal.
The dialog takes focus back as soon as the entry is removed.
* fix(dashboard): handle the Properties stat failure instead of leaving it unhandled
puter.fs.stat both calls the error callback and rejects. The properties
dialog rendered the error from the callback but dropped the promise, so
opening it on a deleted item or offline logged an unhandled rejection.
* fix(dashboard): don't double-encode the "anyone" and withheld-invite share rows
The share dialog encodes row names when it renders them, but these two
labels came from i18n() already HTML-encoded, so a translation containing
an apostrophe or ampersand would show its entity text. They're now taken
unencoded like every other row name.
* fix(dashboard): make the touch context menu reachable by assistive tech and keyboard
The touch action sheet had no roles and never took focus: it was appended
at the end of the page, so a screen reader announced nothing on open and
focus stayed on the page behind it. It's now a menu of menuitems (with
separators and submenu popups marked), takes focus on open, gives it back
on close, moves between enabled items with the arrow keys and Home/End,
and shows an inset focus ring for keyboard use. Taps draw no ring.
* fix(dashboard): keep Apps folders and order when a settings read fails
The Apps tab read the saved order, folders and uninstalled-apps list with
`.catch(() => null)`, so a failed read looked like a user who had never
saved any. One flaky request emptied the folders and reset the grid to
the default order, and the next drag or folder edit wrote that loss back
to kv for good.
A failed read now keeps what the session already has (the last
uninstalled-apps list included). Until a read of the order or folders has
succeeded, saves stay in memory instead of overwriting the stored value.
* fix(dashboard): drop the Apps tile a failed deep-link launch drew
Landing on /app/<name> (or choosing an option in the add-app modal) adds
the app's tile before the launch runs, because the launch is what installs
it. When the launch failed — no access, no app token, a thrown error — the
tile stayed for the rest of the session, survived refreshes, and every
click on it failed again.
The launch outcome is now passed to settleDeepLinkLaunch, which takes a
tile it drew back out (and restores a previous uninstall record) when
nothing was launched.
* fix(dashboard): put a re-installed app back in its saved slot
Uninstall keeps the app's name in the saved order so a re-install returns
it to its place, but a deep-link landing appended the tile at the end of
the grid. The install animation played on the last page and the tile then
jumped back to its saved slot on the next refresh. The landing now places
the tile through reconcileAppOrder like every other load.
* fix(dashboard): don't double-encode the add-app launch failure alert
UIAlert encodes its message, so passing it the already-encoded i18n string
showed entities on screen in languages with an apostrophe (French read
"s'est mal passé").
* fix(dashboard): say so when an app tile fails to launch
A tile click whose launch rejected (for example the app lookup failing)
only logged to the console: the icon flourish played, settled, and nothing
opened. It now shows the same alert the add-app modal shows for that
failure.
* fix(dashboard): keep focus inside the Apps modals and return it on close
The uninstall and add-app modals are aria-modal but had no Tab trap, so
Tab walked into the search box and tiles behind the scrim, where typing
filtered the grid under the modal. Closing the add-app modal, and
confirming an uninstall, dropped focus to the page body.
Tab now cycles inside both cards; closing the add-app modal returns focus
to the add tile, and an uninstall leaves focus on the tile that takes the
removed app's slot.
* fix(dashboard): upload from a folder's menu into that folder
Upload in a sidebar or breadcrumb folder's menu opened the shared file
picker, whose handler always uploaded into the folder on screen: files
picked for Pictures while viewing Documents landed in Documents. The menu
now hands its folder to the picker.
* fix(dashboard): no New, Upload or Paste where nothing can be created
New Folder, Upload, the New/Paste/Upload menu items and file drops were
only refused in the Trash itself and the Shared view. Inside a trashed
folder they created items without the metadata Restore needs, and at /
every create failed (an upload there threw before its progress window
existed and showed nothing). One check now covers the Trash, folders in
it, the Shared view and /.
* fix(dashboard): make Paste Into Folder work after a cut
The row menu's Paste Into Folder handed a cut to the desktop's
move_clipboard_items, which finds items by their on-screen elements and
plain-string paths. The Files tab's cut stores {path, uid} objects, so
nothing moved and the clipboard was emptied. The menu now takes a paste
handler, and Paste, Ctrl+V and Paste Into Folder share one.
* fix(dashboard): don't cut or copy trashed items out of the Trash
The single-item menu still offered Cut on trashed items, and Ctrl+C
copied them; pasted elsewhere, they kept their raw name in the Trash, a
uid. Trashed items leave through Restore, which puts the original name
back.
* fix(dashboard): Delete Permanently works in every language
The confirmation compared the clicked button's label with 'Delete', so in
any other locale confirming did nothing. The buttons carry values now.
* fix(dashboard): refresh Files on return after a cancelled rename
Escape, or keeping a name unchanged, hid the rename editor but left its
-active class, and the refresh on returning to the browser tab takes that
class for an open editor: the listing stopped refreshing until the next
navigation.
* fix(dashboard): clear a drop target's highlight after the drop
jQuery UI fires no `out` on drop, so the folder row a selection was
dropped on stayed selected (and went to the Trash with the next Delete),
a sidebar folder stayed highlighted as the current one, and a breadcrumb
kept its drop outline.
* fix(dashboard): listing drops keep working after a drop on a folder row
Dropping files from the computer onto a folder row stopped the native
event before the listing's dragster saw it, leaving its enter state stuck:
later drags didn't highlight the listing, and drops on its background
uploaded nothing.
* fix(dashboard): offer Restore only for items Restore can handle
Selecting files inside a trashed folder offered Restore in the
multi-select menu and the selection bar, which then failed once per item:
only direct children of Trash carry restore metadata. The trashed
multi-select menu also drew two separators in a row.
* fix(dashboard): show names as typed in conflict and move-failure alerts
These alerts html-encoded the file name before UIAlert encoded the
message again, so "R&D.txt" read "R&D.txt". "already exists." is
translatable now too.
* fix(dashboard): list failed uploads one per line
The failed-upload list was joined with newlines, which the alert collapses
onto a single line.
* fix(dashboard): translate the shortcut badge's tooltip
* fix(dashboard): select mode toggles rows with any pointer
In select mode, a stylus or mouse tap on a phone or tablet toggled the row
in pointerdown and again in click, leaving it as it was; in a narrow
desktop window a click replaced the selection and the selection bar never
showed. Select mode now toggles in click for every pointer and shows its
bar whenever it is on.
* fix(dashboard): show items added elsewhere while New › Web Link prompts
The New menu's create wrapper suppressed item.added for as long as it ran,
which for Web Link includes its URL prompt, so files added to the folder
meanwhile never appeared. It now counts only from the actual create. A
create that fails now says so instead of failing silently.
* fix(dashboard): keep the Files spinner under the mobile drawer
The loading overlay sat at the maximum z-index, so on phones it drew over
the open drawer and its scrim and took their taps while a folder loaded.
It only needs to sit above the rows.
* fix(dashboard): don't show a failed usage request as zero usage
getMonthlyUsage() resolves with the error body when the request fails, and
Usage and Home read it as a month with nothing used: $0.00 of $0.00, 0%,
and on Usage an empty table replacing the one already on screen. A body
without a usage report is treated as the failure it is, so the last good
numbers stay and a first load shows the "unavailable" note.
* fix(dashboard): draw Files select-mode accents in the selection color
The checked checkbox, the active Select button and the Done button were
filled with --primary-color, the desktop's text color rather than an
accent: charcoal by default, and white (on white text and ticks) for
anyone whose desktop theme uses light text. They use --select-color, the
accent the rest of the selection already uses.
* fix(dashboard): stop the mobile drawer animating under reduced motion
The reduced-motion override for the drawer, its scrim and the menu button
came before the drawer rules it was meant to cancel, and the open
drawer's rule outranked it too, so the drawer still slid and the scrim
still faded. The override now follows those rules and covers the open
state.
* fix(dashboard): make the toast close button readable in dark mode
Dark mode gave the close button the card color and then inverted the
whole element, which turned the disc light grey and the cross white:
about 1.4:1. Without the background the invert gives the light-mode
button's mirror, a dark disc with a white cross.
* fix(dashboard): leave the temporary-account state once the account is saved
Saving a temporary account from the user menu promoted the user in place
without a reload, but Home kept its Save session warning (reopening the
save dialog for a saved account) and Account and Security stayed without
their password and email cards until the page was reloaded. The dashboard
now reacts to account-saved, which fires after the user is updated.
* fix(dashboard): give the API token field 16px text on touch screens
The coarse-pointer rule that sets the token field to 16px, as the other
dialog inputs are, came before the field's own 13px rule of the same
specificity, so the 13px won and iOS zoomed the page when the field was
focused. The touch rule now follows it.
* fix(dashboard): lighten the General access dropdown arrows in dark mode
The dark-mode chevron override covered the share modal's recipient
selects but not the two General access ones, which kept the darker
light-theme stroke on the dark card.
* fix(dashboard): don't leave the sidebar collapse button shaded after a tap
Its hover style was the sidebar's only one not limited to devices that
hover, so on a wide touch screen (an iPad in landscape) the button kept
its hover shade after being tapped.
* fix(dashboard): refresh the Usage tab when the subscription changes
An upgrade from the Usage tab's own button, or a return from the billing
portal, refreshed Home behind it while the Usage meter and plan button
kept the old allowance until the user left the tab and came back. Usage
now handles puter:subscription:changed while it is showing.
* perf(dashboard): load usage and storage once when the dashboard opens
Home and Usage both load the monthly usage and the storage space when the
dashboard opens, whichever tab it opens on, so every open sent
/metering/usage and /df twice. Overlapping loads now share one request.
Nothing is cached: a load after the shared one settles fetches again.
* fix(dashboard): keep keyboard focus on the Usage table's Show more/less
The table redraws without the button that was pressed, so focus fell back
to the page and the next Tab started from the top. Focus now moves to the
button that replaces it, as the sort headers already do.
* fix(dashboard): give primary buttons readable contrast
The dialogs' primary buttons, the share modal's Share and the photo
crop's Save were filled with the link color under white text: 4.07:1 in
light mode, 3.08:1 in dark, where hover lightened it further to 2.38:1.
They take their own fill now, #4a67f5 (4.62:1) darkening to #3d5bd9
(5.68:1) on hover in both themes; links keep their color.
* fix(dashboard): keep collapsed-sidebar labels above the dashboard
The hover label is attached to body at z-index 1000, while the dashboard
window's z-index climbs with every click (focusWindow raises it). Over a
long session the window passed 1000 and the labels rendered behind it,
so hovering the collapsed sidebar showed nothing.
* fix(dashboard): bring muted and tertiary text up to AA contrast
The muted and tertiary greys carry real information (form hints, file
dates and sizes, share "via" lines, the sidebar's team name,
notification text and times) but fell short of 4.5:1: 2.56:1 and 3.54:1
on white, 3.18:1 and 3.13:1 on dark cards. They now clear it on the
cards and the sidebar in both themes (light #5f6b7d / #707070, dark
#8b95a5 / #94949c). Disabled buttons keep the fainter grey through their
own token, so they still read as disabled.
* fix(dashboard): name the plan on self-hosted installs instead of "--"
A self-hosted install has no /marketplace/subscriptions/current route, and
Home treated its 404 like any failed read, leaving "Your Plan" at "--" for
good. A 404 now shows the plan every account starts on. The upgrade badge
and link, which have nothing to reach there, go too, unless the hosted
upgrade dialog is loaded.
* fix(dashboard): make hover and press feedback visible in dark mode
Dark mode's hover color, #2a2a2a, was 1.05:1 against the #262626 cards
and #252525 sidebar, so hovering a notification or sidebar item and
pressing a touch-menu or drawer item showed next to nothing. #333 sits
as far off them as light mode's hover sits off white, and stays below
the selected item's #3d3d3d.
* fix(dashboard): follow a username change in the Files tab
Changing the username, or saving a temporary account under a chosen
name, moves the home folder. The GUI rewrote data-path attributes and the
path globals, but the Files tab kept its current folder, back/forward
history, clipboard and drawn rows on the old path, so sorting, New
Folder, Upload, Up, Back and the breadcrumbs all failed with "This folder
couldn't be opened" until a reload. update_username_in_gui now announces
the change, and the Files tab moves its paths over and redraws.
* perf(dashboard): lay out only the new row when an item is added to Files
Every item added to the open folder from elsewhere (another tab, an
upload, a move into it) restyled and re-truncated every row in the
listing, so a burst of adds was quadratic in the folder's size: 100 adds
into a 300-item folder took ~800ms of main-thread work. The added row now
takes the listing's column layout on its own (~130ms for the same burst).
* fix(dashboard): open the Sort and View menus at their buttons from the keyboard
Enter or Space on either button fires a click with no coordinates, so the
menu opened at the top-left corner of the screen, far from the button.
A keyboard press now opens it below the button; a pointer click still
opens it at the pointer.
* fix(dashboard): open a breadcrumb's long-press menu as the touch sheet
A breadcrumb's long-press opened the desktop context menu at the event's
pointer position, which a long-press doesn't have, so on tablets the menu
landed wherever an unset position put it. Breadcrumbs now open the same
touch sheet, anchored to the crumb, as the sidebar folders and rows do.
* fix(dashboard): don't drag-move items the user can't move
Delete, Cut and their buttons already leave out shared roots and items in
a read-only share, but dropping them on a folder, a sidebar entry or a
breadcrumb still sent the moves, and each came back as a "Forbidden"
alert. Drag moves now leave those rows out too; copying them still works.
* fix(dashboard): clear "1 item selected" when a double-click opens a file
Opening a file by double-click deselects its row, but the footer kept
saying "1 item selected" with nothing selected.
* fix(dashboard): only the Trash gets the Trash label in breadcrumbs
Any folder named "Trash" was shown with the translated Trash label in the
breadcrumbs, so in German ~/Documents/Trash read as "Papierkorb". The
label now goes on the user's Trash folder only.
* fix(dashboard): name a trashed folder by its old name in the breadcrumbs
A trashed item's name on disk is its uid, so opening a trashed folder
showed a crumb like "ffaff8cb-dcaf-44f7-…" while its row in the Trash
read "Old project". The crumb now uses the name the row shows.
* fix(dashboard): show why Delete Permanently failed and keep the item
delete_item fades the item out before the request; when the request
failed it left the item hidden, as if deleted, and passed the alert the
undefined `responseText` of a puter.js error, which threw. The item now
comes back and the alert shows the error's message.
* fix(dashboard): translate the New menu's Web Link and templates strings
"Web Link", its URL prompt, validation and failure messages, the "User
templates" submenu, and the account prompt before publishing a worker
were hardcoded English in the Files New and item menus.
* fix(gui): stop leaking a document click handler per context menu
Every context menu bound its item-click handler on document, delegated
to its own id, and never unbound it. Each menu opened therefore left a
handler that ran on every later click in the page and kept the menu's
items alive, rows and fs entries included. The handler is now bound on
the menu itself and goes with it. It still returns false, so item clicks
keep not reaching document-level click handlers, as before.
* fix(gui): run a context menu item once on a double-click
The menu stays clickable during its 200ms fade-out, so the second click
of a double-click ran the item again: double-clicking Share… or
Properties in the dashboard opened two stacked dialogs. A menu that has
started closing now ignores item clicks.
* fix(dashboard): drag a select-mode selection from its own rows
Select mode returned from pointerdown before recording whether the
pressed row was already selected, so a drag started from that stale
value: dragging selected rows didn't move them, and a stale "selected"
could let a drag from an unselected row clear the selection. The value is
recorded first now.
* fix(dashboard): leave Files select mode when the window widens past 480px
Select mode's Select and Done buttons only show up to 480px, so turning
it on in a narrow window and widening it left every click toggling rows,
with no way out short of narrowing the window again.
* chore(dashboard): add the standard file header where it was missing
* fix(dashboard): rename editor keeps entity-like names; rows follow remote renames
The name editor decoded its already-decoded value a second time, so opening
it on a file such as "R&D.txt" and clicking away renamed it to "R&D.txt".
A rename or update from another tab only patched a row's attributes, while
its open/copy/share handlers kept using the entry they were rendered with;
the row now keeps that entry current and refits its name.
* fix(dashboard): Files selection, preview and Trash/Shared edge cases
- A marquee drag without modifiers now replaces a selection made by click,
Ctrl+A or the arrow keys instead of adding to it.
- With the image preview open, clicking another image switches to it, and
moving onto a non-image closes it instead of keeping the old image up.
- Cut (Ctrl+X, multi-select menu) skips trashed items, which leave the Trash
through Restore; Ctrl+V refuses the Trash and the Shared view like the
Paste menu item does.
- Drops on the Shared sidebar entry or breadcrumb are refused (the drag
snaps back) instead of sending writes to a path that isn't a folder.
- The Trash selection bar shows Delete permanently again after a selection
elsewhere had hidden it.
* fix(dashboard): keep an open rename across refreshes; re-sort renamed rows
A same-folder refresh (an upload or paste finishing, a sort change) rebuilt
every row and silently dropped a rename in progress; the editor now comes
back on the same item with the text and caret the user left.
A renamed row whose new name sorts last stayed where its old name was.
* fix(dashboard): Files columns follow the room the listing has
- Resizing a column past the listing's width clamps it instead of resetting
every column to the defaults; a window too narrow for the saved widths
lays out at the defaults but keeps the saved widths for when it widens.
- Columns and grid names re-fit when the window or sidebar resizes the
listing, not only on the next navigation, and grid names hidden behind
another tab are fitted when the Files tab is shown.
- Names are measured in the font they render in (the compact grid's is
smaller), and a column drag relayouts at most once a frame.
* fix(dashboard): Files keyboard and touch edge cases
- The marquee selects file rows only, not the Shared/Trash place rows Home
shows on narrow screens.
- Row shortcuts stand aside while the touch action sheet is open.
- Breadcrumb long-press opens its menu on iPadOS too.
- A folder rendered before the saved view preferences load uses the
defaults instead of throwing and blocking navigation.
* fix(dashboard): share and properties modals — focus, Escape, link state
Share modal:
- Escape pressed in a window opened over the modal (a verification or
upgrade gate) no longer closes the modal underneath.
- Turning the link on or off for a selection too large to list now shows
the result instead of leaving the control on its old state.
- Opening the link up starts at view access; it no longer reuses a hidden
mode left over from earlier, which could hand out edit access.
- Focus returns to the select the user changed.
Properties modal:
- Takes focus when it opens, keeps Tab inside, gives focus back on close,
and leaves Escape to a window opened over it.
- Shows a loading state, and opening Versions on a folder before its
details load no longer leaves an empty body.
- Disassociate is a real button, ignores repeat clicks while pending,
reports a failure, and keeps the website badge while other sites remain.
- Tabs carry tab/tabpanel roles; transitions respect reduced motion.
* fix(dashboard): account dialogs, avatar saves and usage figures
- A form dialog ignores Escape and backdrop clicks while its request runs,
so the outcome isn't lost behind a closed dialog; the close button still
works.
- A new API token, shown only once, survives a stray click outside the card.
- Copy token works on origins without navigator.clipboard (plain-http
self-hosts) instead of throwing, falling back to a selected field.
- Saving one profile picture and then another before the first finished
can no longer leave the first one's picture or failure on screen.
- The storage host bar is clamped to the room left beside Puter's share and
hides its label when there is no host figure.
- Sub-cent dollar costs read "<$0.01" rather than "$0.00", and the usage
meter reads 99% until the allowance is actually spent.
* fix(dashboard): Apps folder drag, search, keys and loading
- A drag inside an open folder that is cancelled (Escape, blur) or dropped
back in place puts the tiles back in their saved order; the cached panel
markup used to skip the rebuild, and the next drag then saved the
cancelled move too.
- Search no longer matches substrings of generated app ids, so "app" or a
single hex letter stops returning every website shortcut.
- Arrow keys and Enter stay with the notifications panel, an account dialog
or the touch action sheet while one is open over the grid.
- The grid shows after 1.5s even if an icon host never answers.
- Refreshing a grid already on screen keeps the page and skips the fade.
- Rename from a folder's menu focuses the name on touch devices too, and
the folder dialog's label follows renames and counts the apps shown.
- i18n inserts %% values literally, so a name containing $& or $' no longer
comes out mangled.
* fix(dashboard): shell navigation, a11y and notification sync
- Missed notifications replayed on load toast as one burst (a few, then a
summary) instead of one toast each.
- A notification read in another tab while this tab's first listing is in
flight is no longer shown as unread when that listing lands.
- Focus stays in the notifications panel when Mark all read or Retry hides
the button that had it.
- The active sidebar tab carries aria-current, and the account button is
named by the username even while the collapsed sidebar hides it.
- Landing with ?ref= replaces the history entry, so one Back leaves.
- Ctrl/Cmd/Shift-click on a sidebar tab opens it in a new browser tab.
- Recently used keeps the newest list when refreshes overlap, and app names
are URL-encoded in the links it opens.
* fix(dashboard): focus rings, dark-mode contrast and reduced motion
- App tiles show a focus ring, not only the hover enlargement; Home card
headers get an inset ring the card's rounded clip can't cut off; the
Delete account button gets the settings cards' ring.
- Pager arrows are mouse-only (the dots page by keyboard), so invisible
arrows are no longer Tab stops, and an arrow with no page leaves the
accessibility tree.
- Dark mode: the Files toolbar's action icons match the nav arrows and stay
readable on the hover chip, hovered breadcrumbs keep their contrast, and
the shared-item dot's ring follows the row background.
- The row '⋯' button is visible at rest on touch screens.
- A long username or email wraps inside the profile card.
- The touch action sheet, the Files selection bar and the app feedback
modal stop scaling/sliding under reduced motion.
* fix(gui): desktop rows store remote renames raw; column resize stays in bounds
- The desktop's item.renamed/item.updated handlers wrote HTML-escaped names
into data-name, the title and the name editor (and titled windows by an
undefined uid). They store the raw name now, as rename_file does, so the
editor shows the real name now that it no longer decodes a second time.
- Resizing a Files column while saved widths are too wide for the listing
starts from the widths on screen, and a width is held at its column's
minimum, so a drag or auto-fit can't save a negative width.
- Double-clicking a row closes the image preview, which would otherwise
float above the app window it opens.
* fix(puter-js): replay the request after a token_auth_failed reauth
A 401 carrying the legacy `token_auth_failed` code opened the sign-in
prompt and then dropped the re-authenticated token on the floor:
`resolveReauth()` fell through to `return null` instead of returning
`{ action: 'replay' }`, so the original call was never re-issued and
rejected with `Unauthorized` even though the new session was valid.
Return the replay verdict the `reauth_required` branch already returns.
Both replay paths stay one-shot (`ctx.done.add('reauth')`,
`spec._replayed`), and the auth gate rejects before the route handler
runs, so a replay has no side effects.
Closes#3953
* fix(puter-js): sign in once when a replayed XHR is refused again
handle_resp ran the reauth flow on the replay's own 401, so a
token_auth_failed that survived the replay reset the fresh token and
opened a second sign-in before rejecting. Treat a replay's 401 as final,
as the 403 verification-gate branch already does.
---------
Co-authored-by: Daniel Salazar <[email protected]>
`useCredentialChain: true` in `dynamo.aws`, `providers['aws-polly']` or
`providers['aws-textract']` takes credentials from the default AWS chain
instead of static keys, as `s3.s3Config` already does. One provider is shared
and refreshes temporary credentials itself.
* feat(dashboard): account dialogs as dashboard modals instead of windows
Edit profile, change username, change password, change email, create API
token, and delete account in the Account tab (and change password in the
Security tab) now open as dashboard overlay cards, like the share,
properties, and confirm dialogs, instead of desktop UIWindows. They are
centered cards on desktop and tablet and bottom sheets on phones.
- dashboardOverlay.js: the overlay shell UIDashboardDialog already had
(reveal, Esc/backdrop/close dismissal, focus trap, focus return), pulled
out so the new form dialog shares it. It also pins the overlay to the
visual viewport so iOS's keyboard can't cover a sheet's fields, and
leaves Esc to a modal opened on top of it.
- UIDashboardFormDialog.js: labelled fields, password show/hide, an
aria-live status line that marks and focuses the offending field, a busy
submit button, and a done state.
- postUserProtected.js: the cookie-retry / provider re-sign-in / reauth
flow the four account windows each carried, in one place.
- Deleting an account is one dialog now (warning plus confirmation) rather
than two stacked windows.
- Touch: 44px controls, 16px inputs (no iOS focus zoom), no autofocus
that pops the keyboard mid-animation, form buttons side by side on
phones, safe-area padding dropped while the keyboard is up.
- The replaced windows had no other callers and are removed with their
tests, which are ported to the new modules.
* fix(dashboard): a double-click that opens a dialog no longer dismisses it
The second press of the double-click lands on the freshly mounted backdrop
and closed the dialog straight away. Backdrop presses with a click count
above one no longer count toward dismissal.
* fix(dashboard): a failed form submit keeps focus in the dialog
Locking the fields disabled the focused control, which drops focus to the
page, so after an error Enter no longer retried and screen readers lost
their place. The control that had focus gets it back once the fields
unlock, unless the handler moved focus elsewhere in the dialog.
* fix(dashboard): a form error keeps the field it names in view
The status line scrolled the dialog body to the bottom, which on a short
screen (a phone with its keyboard up) left the field being focused and
marked invalid scrolled off the top. The body now scrolls back up just
far enough to show that field.
* fix(gui): a blocked re-sign-in popup fails instead of waiting forever
openRevalidatePopup polled a popup that was never opened, so when the
browser blocked it the account dialog stayed busy indefinitely. It now
rejects straight away and the dialog says the sign-in didn't finish.
* fix(dashboard): password show/hide reads as one action, not a pressed toggle
The button flipped its label between Show and Hide password and also set
aria-pressed, so assistive tech announced "Hide password, pressed" while
the password was showing. It keeps the action label and drops aria-pressed.
* fix(dashboard): screen readers hear a form dialog's success message
The done state arrives as a new status region that already holds its text,
which screen readers don't announce, so after a change succeeded they only
heard "Done, button". The Done button that takes focus is now described by
the message.
* fix(dashboard): requesting an email change no longer sets the cached email
The server only stages the new address until the emailed link is
followed, but the dialog wrote it into window.user.email straight away.
That cached a wrong address for the session and kept refresh_user_data from
updating the Account tab once the change was confirmed, since the two
already matched.
* fix(dashboard): form dialog labels drop the global label shadow
style.css's bare `label` rule gave the field labels a white text-shadow,
which ghosted them on the dark theme, and an extra 3px under each label.
* fix(dashboard): dialog inputs keep a 1px border when focused
style.css's global input :focus rule still set a 2px border width, so a
dialog field's text shifted by a pixel each time it took focus. The focus
ring is the box-shadow; the border stays 1px.
* fix(dashboard): phone dialog inputs stay 16px instead of jumping on focus
On phones style.css's .device-phone input rule outranked the dialog's
16px size at rest, so fields drew at 17px and shrank to 16px the moment
they took focus.
* fix(dashboard): temporary accounts can delete themselves again
The server reports oidc_only for every passwordless account, temporary
ones included, so the shared user-protected helper sent a temporary
account into the linked-provider sign-in, which has no URL for it, and the
deletion never went out. Temporary accounts post directly, as the route
admits them without credentials.
- Providers send upstream calls with a driver-owned `upstreamSignal`
instead of the caller's `abortSignal`. A disconnect detaches the chat
stream: output stops, the provider keeps reading until the upstream
reports usage, and that usage is metered.
- A detached stream gets SDK_TIMEOUT_MS to finish. After that the driver
aborts the upstream, and the stream is metered like any other stream
that ends without usage.
- The disconnect check also runs right before dispatch.
- The OpenAI stream handlers report usage that arrived before an abort.
- Docs: stopping a stream stops the output, and a request that reached
the model is billed in full. Detached streams get 10 more minutes.
* fix(dashboard): give narrow Files listings the two-row layout
The two-row rows (name, then size and date) were keyed to a phone-width
viewport, so between 481px and ~930px, where the sidebar and folder column
take their share, the fixed size and modified columns squeezed names to a
few characters. The layout now switches on the listing's own width with a
container query, which phones still meet and wide listings never do.
* fix(dashboard): wrap the Files toolbar onto two rows in narrow listings
On tablets the nav buttons, crumbs and actions sat on one row wider than
the listing, so the sort, view, new-folder and upload buttons ran off the
right edge. Narrow listings now use the phone's two-row toolbar (crumbs
above, buttons below); only the menu-button clearance stays phone-only.
* fix(dashboard): keep a deep folder path on one row with the current folder in view
A long path wrapped the crumbs over several lines on top of the column
headers and pushed the toolbar actions off-screen; where the crumbs already
scrolled (phones), the row opened at the root, hiding the current folder.
The crumbs now scroll within their row and are scrolled to their end on
render and when the tab is shown.
* fix(dashboard): end clipped file names in the list with an ellipsis
With the name column auto-sized, which is always the case on phones and
tablets, a long name was cut off mid-letter with no sign it continued.
* fix(dashboard): keep the Files selection bar under the drawer and sheets
The bar's visible state set z-index 99999999999999999 (clamped to the
maximum), so in phone select mode it drew over the open navigation drawer,
covering the account button, and over the share sheet it opens. Its base
z-index already clears the rows and the footer.
* fix(dashboard): let the last Files rows scroll clear of the phone selection bar
In phone select mode the list's bottom padding only cleared the footer, so
the last row stayed behind the floating action bar even fully scrolled.
* fix(dashboard): keep the phone Files footer and selection bar above the home indicator
The installed app runs edge to edge, so the footer's item count sat under
the iPhone home indicator. The footer now grows by the bottom safe-area
inset, and the list padding and floating action bar move up with it, as
the Apps tab and the dashboard's bottom sheets already do.
* fix(dashboard): clear the home indicator in the item properties sheet
On phones the sheet sits flush with the bottom edge, and unlike the share
sheet it mirrors, its body didn't pad for the bottom safe-area inset, so
the last details scrolled under the iPhone home indicator.
* fix(dashboard): keep the app feedback sheet's buttons above the home indicator
As a phone bottom sheet it sits flush with the bottom edge, so Cancel and
Send ended under the iPhone home indicator.
* fix(dashboard): size the touch context menu as a card on tablets
The touch menu took 90% of the viewport, which on an iPad meant a ~920px
strip with its labels far from the row they belong to. It now stops at
400px, which every phone stays under. Its height is also measured after
the width is set, so the clamp to the viewport uses the real height.
* fix(dashboard): let the Apps modals scroll in a short viewport
The Add-an-app and uninstall cards had no height cap and their overlay
centers without scrolling, so on a landscape phone with the keyboard up
(the viewport resizes for it) the request form's title and buttons sat
off-screen with no way to reach them.
* fix(dashboard): align Account and Security with the other tabs on phones
Below 768px their wrapper added a 16px gutter inside the content area's
own, so both tabs sat 32px in while Home, Apps and Usage (and the menu
button above them) sit at 16px. The extra padding stays for Apps, whose
content area has none.
* fix(dashboard): keep Home's recent apps inside their card on tablets
Each recent app was a fixed 200px inside 1fr columns, whose minimum is
that width, so in the half-width card on a landscape iPad the second
column ran past the card's edge and its name was cut off with the
ellipsis out of view. The rows now shrink with their column.
* fix(dashboard): keep every Files folder reachable in a short viewport
Trash was fixed to the bottom of the viewport, so in a landscape phone or
a short window it sat on top of Public and Videos, while Shared ran below
the column with no way to scroll to it. The folder column now scrolls,
and Trash sits at its foot in the flow: in the same spot when there is
room, after Shared when there isn't.
* fix(dashboard): don't leave Account and Security buttons highlighted after a tap
Their hover background wasn't limited to hover-capable pointers like the
rest of the dashboard's hover styles, so on touch devices a tapped button
(Change Password, Manage Sessions, ...) stayed shaded after its dialog
closed.
* fix(dashboard): give the Files row menu button a full-size touch target
On phones the row's '⋯' is 40x23, right beside a row whose tap opens the
item, so a slightly-off tap opened the file or folder instead of its
menu. In the two-row layout it now has a 44px square hit area on touch
screens.
* fix(dashboard): enlarge the Files back, forward and up touch targets
They were 28px squares on touch screens. On coarse pointers they now take
36px with a matching negative margin, so the toolbar layout is unchanged.
* fix(dashboard): size Home's recent apps card to its apps on phones
Its 310px minimum height matches the square welcome card beside it on
wider screens. In the single-column layout the welcome card drops its
square shape but the minimum stayed, leaving a block of empty card under
a short list of recent apps.
* fix(dashboard): stop clipping app names' descenders on phones and small tablets
Below 768px the tile height budgeted 52px icon + 10px margin + 12px for a
label line that is 15.6px tall, so the bottoms of g, p and y were cut off
in every app name. The tile now has the full line (78px) and the row gap
gives back the 4px, so tiles sit exactly where they did.
* fix(dashboard): show Usage amounts in full on phones
Every Usage table cell ellipsized, numbers included, so on a phone a
token count like 12,345,678 read as "12,345...". Below 480px the units
and cost columns now keep their full width and the resource name is the
one that truncates. Wider layouts are unchanged.
* fix(dashboard): stack Home's recent apps when their card is narrow
In the two-column Home on a portrait tablet (iPad Air and Pro 11 at
820-834px, or 769px windows) the Apps card is about 200px wide, and two
columns of recent apps cut every name to a letter or two. The list now
switches to one column on the card's own width; 1024px and wider keep two.
* fix(dashboard): fit two grid tiles a row in narrow Files listings
Grid view's 170px column minimum left one 330px tile per row on 360px
phones (and in a tablet's narrow listing), so barely two files fit on
screen. Narrow listings now use two equal columns, and the tile's icon
box shrinks with the tile instead of keeping its fixed 150px.
* fix(dashboard): align the Shared and Trash rows' menu button on phones
Item rows get position: relative from jQuery UI draggable, but the Shared
and Trash rows above Home's folders aren't draggable, so their '⋯' was
positioned against the whole list and sat 3px off from every other row's.
Image, video, TTS, speech-to-text and voice-changer driver tests run one
request at factor 1 and again with every `ai.cost.factor.*` hook set to
2, and check that both the credit hold and the recorded cost double.
Chat and OCR already had this coverage. A driver that hands a provider
the raw metering service instead of its factored view now fails its
test.
`withAiCostFactorHook` in integrationTestUtil keeps the hook in place
for a callback, since providers record their usage unawaited.
Infron (a new-api gateway) answers "bad response status code N" with the
upstream's status when the upstream replied without a JSON error, e.g. a
model the upstream no longer serves. That 4xx was classified as the
caller's bad request, so the request skipped fallback, the dead route
stayed in rotation, and the caller got upstream_bad_request. It now counts
as an upstream failure: fallback runs, the route is marked unhealthy, and
an exhausted chain reports upstream_provider_unavailable. A gateway error
that carries the vendor's own message still stays request-level.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The desktop built the language list and never placed it on the user menu, so a saved locale could not be chosen. Register Filipino and show that list.
Co-authored-by: Cursor <[email protected]>
* fix(teams): refuse to boot when teams_enabled has nothing registering Teams
Core's seat checks (team 2FA, seat password reset, email and username
changes, self-delete, the signup placeholder claim) read the team store and
skip when it is absent. With `teams_enabled` on and no extension registering
the store and service, the server now fails at boot instead of serving
without those checks.
- whoami no longer string-matches the extension proxy's "missing property"
error: with the flag on, the store is always there.
- Tests that turned the flag on without Teams drop it; the puter.js harness
sets it only under the `teams` capability.
- Drop a stale services/index.ts comment.
* refactor(gui): drop the Teams console styles, which ship with the console now
* feat(metering): let registered plans declare free and no-allowance traits
A policy passed to registerPolicy can now set `free: true`, so
isFreeSubscription and everything that reads it count the plan as free.
It can also set `noAllowance: true`: the plan grants no monthly
allowance, so only purchased credit can be spent, and the cached
credit check refuses an actor that has none. A non-positive allowance
without the trait still means the plan is not metered.
getActorSubscriptionStatus returns the plan along with whether it was
paid for and whether the answer is provisional (a lookup behind it
failed, or the actor lacks a field resolvers key on), so callers can
tell a fallback from a resolved plan. getActorSubscription is unchanged.
* feat(metering): provisional resolver answers, and tighter no-allowance accounting
A subscription resolver can answer { id, provisional: true }. The answer
wins like any id but is cached only for the fallback window.
On a no-allowance plan, the month record now records allowanceUsed = 0,
so spend that purchased credit paid for is not counted again against an
allowance the actor gets later in the month. An actor that never had
budget raises no credit-state event. setMonthAllowance refuses plans
whose allowance an override never applies to.
* fix(metering): keep resolved plans clean when a default fails, and announce moves onto no budget
A failed or provisional default resolver now marks the answer provisional
only when the default is what applied; an explicit plan that won is
cached for the full window. A provisional answer with no id still marks
the result provisional.
A plan or credit change now re-arms an actor's credit alert instead of
forgetting it, so an actor moving onto a plan with no budget hears
'exhausted' once. An actor never seen with budget still hears nothing.
* chore(metering): let a provisional answer carry no id, and fix two resolver docs
* chore: one-line comments
* refactor: let core run without a teams registration
Teams becomes optional: `services.team` and `stores.team` may be absent, and
core stops assuming either is there.
Seventeen call sites across share, signup, account deletion and the homepage
now degrade instead of throwing: a team recipient that cannot be resolved is
"no such recipient" rather than a fault, a group share folds in nothing, and
account deletion stops asking what a seat was charged for. This generalises
the pattern `gates.ts` and `SocketService` already used.
Teams' own files take a private handle to their store and service, so the
feature's code stays free of optionality that only core needs.
No behaviour changes where Teams is registered.
* refactor: put a contract between core and teams
`core/teams.ts` holds the shapes core reads and the calls it makes, and the
registries declare the pair as provided rather than built in. The service,
store and controller are registered by whatever runs the feature.
Typing them properly turned up eight AuthController call sites the previous
commit could not see: the controller reads its stores from the built-in
registry, so an absent `team` fell to an index signature and typed as
`unknown` instead of erroring. They now go through the same optional path as
the rest.
The feature's own tests move with it. The cases in core suites that build a
team to exercise a core rule still need relocating, so those suites are red
here.
* test: stub core's seat rules, rehome the rest with the feature
A core suite can no longer build a team, so the rules that refuse a seat get
`testFixtures/seatStub.ts` instead: it answers the contract, which is all
those rules read, and puts the registry back when the test ends.
Seventeen cases move that way. Four could not: group shares and a seat's 2FA
enrolment over HTTP need the real feature and the `/teams` route, so they go
with it, as does the whole of `GroupGrants.test.ts`.
Two whoami cases asserted a seat's team through `extension.import`, which
resolves the registry rather than the stores object. They now assert the
absent case, and the behaviour they covered is asserted against
`buildUserDetails`, which takes its stores as an argument.
Suite: 12252 passed, 38 skipped.
* refactor: take the teams console out of the built-in tabs
`TabTeams`, `teamsConsole` and `teamActionIcons` are no longer built in. The
dashboard already invites a tab through its `dashboard-will-open` event, so
whatever provides Teams contributes the console the same way.
Its 113 strings go with it and register into the shipped English dictionary
at load, so `i18n('teams_*')` resolves as it did. Only `en.js` ever carried
them, so no translation is lost.
Three modules stay, because things other than the console use them:
`teamBadge` (the dashboard shell), `orgSeat` (Home, Account, Security) and
`shareTeams` (the share picker). They already render nothing when the
account has no team. `teams_account_of` stays with `teamBadge` for the same
reason, and the `share_*` and `plan_team_*` strings stay with their callers.
The GUI builds clean with no console at all, and builds it in when the tab
is contributed.
* docs: seats past the owner's current limit get no allowance
Presigned URLs die with the credentials that signed them, and the SDK only refreshes temporary credentials five minutes before expiry, so a URL signed late in a credential's life could expire long before its requested lifetime (up to an hour). The chain provider now reports expiry an hour early and force-refreshes credentials that are already inside that window.
Node 26's bundled undici negotiates HTTP/2 by default with a 256 KB
per-stream receive window, which capped large downloads at about
window / RTT (8.6 MB/s vs 46 MB/s over HTTP/1.1 at 23 ms). The guard swaps
in an Agent of the same class with 4 MB stream / 16 MB connection windows.
The web upgrade dialog's button opens the dashboard with the refusal
reason, the app the call ran as, and the refused method as query params,
so the dashboard can open its upgrade flow with that context.
* chore: move to Node 26
Docker image and CI run on Node 26 (bookworm-slim, same Debian base as before).
Node 26's bundled undici reads the global dispatcher from the
`undici.globalDispatcher.2` slot, so the guard's 10-minute timeout wrap on
`.1` no longer reached plain fetch() and provider calls fell back to the
5-minute headers timeout. The guard now wraps every present slot and tracks
wrapped dispatchers in a set, since compose() can return a Proxy that writes
a marker property through to the original dispatcher.
* test(puter-js): disable Node's web storage in test workers
Node 26 defines its own localStorage global, undefined without a storage
file, and vitest's jsdom environment doesn't replace globals that already
exist, so jsdom tests saw localStorage as undefined.
index_url may not point at a system host: the origin, the api host, or a
subdomain an extension has claimed. App create and update now apply the
same refusal to `<claimed>.<domain>` (any case, any port) that they apply
to the origin and api hosts.
The host-to-claim match is a new exported `subdomainLabelOf` in
hostRedirects, also used by the claim dispatch middleware, so both
decide the same way.
Co-authored-by: Daniel Salazar <[email protected]>
* fix(fs): support offset and byte_count in read operations
Allow partial content reads via offset and byte_count parameters in puter.fs.read and backend FS controllers.
- In puter.js read operation, check options.offset and options.byte_count against null/undefined so offset: 0 is preserved in query params.
- In handle_resp, accept any 2xx status code so 206 Partial Content responses resolve successfully.
- In backend FS controllers (LegacyFSController and FSController), derive the HTTP byte range from query offset/byte_count parameters when an explicit Range header is not present.
- Add unit and integration tests across controllers and SDK test suites.
* fix(fs): strict range params, 416 past EOF, drop format churn
- resolveReadRange accepts only decimal digit strings and safe integers
- readContent maps S3 InvalidRange to 416 instead of a 500
- revert unrelated union-type reformatting, restore truncated test comment
---------
Co-authored-by: Daniel Salazar <[email protected]>
A folder opened with an app (Open With, Open with AI) reached puter.js as
a file: the GUI never forwarded the signature's fsentry_is_dir, so the
launched FSItem always had isDirectory false. The GUI now appends
puter.item.is_dir, and puter.js reads it in onLaunchedWithItems and the
onItemsOpened launch replay. Both now share one URL-to-FSItem builder.
"Open with AI" moves directly under Open, above Open With, in the
desktop and dashboard file menus.
"Open with AI" now launches the `ai` app with the item the same way
Open With launches any app: launch_app with file_path/file_uid, so the
app gets a signed launch item via puter.ui.onLaunchedWithItems. It
replaces the custom `ai:openFsEntries` postMessage, which went to an
existing AI window.
- The helper moved from UIItem into helpers/openWithAI.js, shared by the
desktop item menu and the dashboard Files menu (generate_file_context_menu).
- A shortcut opens its target.
- Dropped from multi-select menus, since a launch opens a single item.
- Renamed open_in_ai -> open_with_ai ("Open with AI") and removed the
unused ai_app_unavailable string.
The desktop no longer launches the `ai` app at boot. This removes the
`is_panel` window mode, which existed only for that launch, and the
toolbar/taskbar/window/popover offsets tied to it. It also removes the
desktop sparkles button that showed the panel, and the
`silent_on_failure` launch option, whose only caller was the boot launch.
"Open in AI" in the item context menu still launches the app as a
normal window.
* fix(dashboard): size the Notifications sidebar row like its neighbors
The bell button's font: inherit overrode the sidebar item's font-size
(16px instead of 14px, 15px in the drawer), and its icon wrapper stayed
18px while the drawer grows nav icons to 20px.
* test(dashboard): scope the directory-note assertion to the directory row
The 2FA row reuses .teams-directory-note, so the unscoped selector read
both notes and the test failed.
* fix(dashboard): only treat a picked file as a new avatar while the avatar picker is open
The Account tab listened for every file_opened on the dashboard window,
so choosing an image for a web link's Change Icon in the Files tab opened
the profile-picture crop modal, and saving it replaced the avatar.
* fix(dashboard): let dialogs over the Files tab keep their keyboard
The Files keydown handler ran under an open confirm, so pressing Enter on
the focused Delete button of the permanent-delete prompt opened the
trashed item instead (stacking a second alert), and arrows or Delete
acted on the rows behind the dialog.
* fix(dashboard): keep Apps grid keys away from an open context menu
Choosing a tile's menu item with Enter (e.g. Open in new tab) also
launched the focused app in place, and arrows moved tile focus while
they walked the menu.
* fix(dashboard): Escape on a menu or modal inside an app folder keeps the folder open
The menu's and the uninstall modal's Escape handlers removed them before
the folder's listener ran, so it saw nothing above it and closed the
folder with the same keystroke.
* fix(dashboard): a tap on the drawer or sheet scrim only dismisses it
Outside-press handlers closed the mobile drawer and the notifications
sheet on touchstart/pointerdown, which took away the scrim's hit area
before the click, so the tap also landed on the app tile or file row
underneath.
* fix(dashboard): let the sidebar nav scroll on short viewports
The nav clipped its overflow, so in a landscape phone's drawer (or a
short desktop window) Usage, Account, and Security fell below the fold
with no way to reach them.
* fix(dashboard): keep the mobile drawer full width when the desktop sidebar is collapsed
The remembered collapse outranked the drawer's width rule, so below the
drawer breakpoint it opened as an unlabeled 50px icon strip, and the
toggle that would undo it is hidden there.
* perf(dashboard): stop refetching account data each time focus leaves an app
Home's window focus listener fired whenever focus came back from an app's
iframe, so every click from an app to the dashboard re-pulled whoami,
subscription, storage, and usage (5 requests), on any tab. It now only
refreshes after the page itself lost focus to another window.
* fix(dashboard): show a seat's team name unescaped in the plan card
i18n escapes its arguments for HTML, but the note is set with .text(), so
a team called "Bob's & Co" read "Managed by Bob's & Co".
* fix(dashboard): stop double-escaping app names in uninstall alerts
UIAlert escapes its message, so an app titled "Tom & Jerry" read
"Tom & Jerry" in the uninstall-failed and sessions-not-ended alerts.
* fix(dashboard): roll back an uninstall whose revoke failed
puter.perms.revokeApp resolves with error set instead of rejecting, so a
failed revoke still removed the tile, marked the app removed for later
sessions, and ended its sign-in, while the app kept its permissions and
the rollback and error alert never ran.
* fix(dashboard): read a team account's suspension when its name matches an Object member
The per-account state map was a plain object, so a username such as
constructor or toString was already "in" it, its audit entries were
skipped, and a suspended account showed as active with no Delete.
* fix(dashboard): update the profile card and sidebar name after a username change
Neither carried the .username class that the rename refreshes, so both
kept showing the old name until reload.
* fix(dashboard): ask how to restore a trashed item whose name is taken
Restore moved without overwrite or dedupe, so when the original location
already had an item of that name the move 409'd and nothing happened:
an uncaught error from the item menu, a console line from the others.
All three restore entry points now share one path that offers the
Replace / Keep Both prompt the paste flow uses, alerts on other errors,
and updates the footer and empty notice once the rows are gone.
* fix(dashboard): refresh a renamed row's name, icon, and position in the Files tab
The Files tab passed rename_file a callback it never accepted, so a
renamed row kept the desktop's 20-character truncation even in a wide
column, kept its old type icon, and stayed out of sort order. rename_file
now takes an optional onDone (carried through undo), which the Files tab
uses to fit the name to its column, refresh the icon and type, and move
the row into place. A cancelled rename no longer truncates the name
either.
* fix(dashboard): drop Publish and Properties from the Shared view's menu
The Shared view is a query, not a folder, so both acted on the virtual
shared path: Properties showed an unknown error and Publish opened a
dialog for a path that doesn't exist.
* fix(dashboard): close the Files image preview on Escape and when leaving the folder
Escape cleared the selection but left the Space preview open with
nothing selected, the preview stayed over a different folder after
navigating, and a preview whose URL arrived after it was dismissed or
replaced still opened.
* fix(dashboard): don't move Files history for a navigation that's dropped
renderDirectory ignores a navigation while another folder is loading,
but every caller had already pushed or stepped history, so after a click
during a load the listing and history disagreed and the next Back or
Forward seemed to do nothing. History now only moves when the render
will run; back/forward steps share one helper.
* fix(dashboard): reopening the current folder adds no Files history entry
Clicking the folder already on screen (e.g. Home in the sidebar) pushed
a duplicate entry, so the next Back reloaded the same folder.
* fix(dashboard): show installed apps when the recommended list fails to load
get-launch-apps sat in the same Promise.all as the installed apps and
its body was parsed without a status check, so a network error or a
proxy's HTML error page replaced the whole grid with "Failed to load
apps". A failed list now falls back to the last one that loaded.
* fix(dashboard): fit the app uninstall dialog on narrow phones
The card is mounted outside the dashboard's border-box rule, so its
320px min-width plus padding came to 370px and was clipped on 360px
screens; a long unbroken app title also overflowed it. Desktop sizing is
unchanged.
* fix(dashboard): keep a new team account's one-time password on screen until dismissed
The credential box lived only in the DOM inside the panel that every
refresh repaints, so revisiting the Teams tab or any later action wiped
a password that can't be retrieved again. It is now kept in state, for
the team it belongs to, and drawn with the panel.
* fix(dashboard): reload the Teams tab after a change made while it was loading
refresh() handed back any load already in flight, so an action or team
switch made during a revisit's background load awaited data read before
the change: a toggled setting snapped back, and a team switch could
paint one team's roster next to another's record. A change during a load
now queues one more load, the stale one skips its paint, and revisiting
the tab doesn't start a second load while init's is still running.
* fix(dashboard): send one re-enable request for a double click in Teams
Re-enable has no confirm dialog to absorb a second click, and nothing
held the action while it ran, so a double click enabled the account
twice (two audit entries). A suspend or re-enable already in flight for
an account now ignores further clicks.
* fix(dashboard): revert the avatar and say so when saving a new photo fails
The crop's Save showed the new picture everywhere and revealed Remove
without waiting for the upload, and update_profile swallows failures,
so a failed save looked saved until reload. The save is now awaited: a
failure puts the previous picture back with an error hint, and Remove
waits for the upload so it can't race it.
* fix(dashboard): hide the Usage tab's plan button for team seats
A seat's plan belongs to its team, so Home already hides its upgrade
link; the Usage tab still offered Upgrade, which only reaches a refusal.
* fix(dashboard): don't drop Home's forced usage refresh during a running load
loadUsageData handed any caller the load already in flight before looking
at force, so a subscription change (or a return from the billing portal)
during a routine load was answered with data read before the change, and
the plan card stayed stale until the next refresh. A forced call now runs
once more after the running load.
* fix(dashboard): activate Apps when the URL names an unknown tab
An unknown hash rendered Apps as the active tab but skipped its
activation, so the grid kept the generic content padding and Apps'
onActivate never ran.
* fix(dashboard): make the sidebar user menu reachable from the keyboard
The user button was a div with no tabindex, so Log Out, account
switching, and Contact Us were out of reach without a pointer. It is
now a button (rendering unchanged), with aria-haspopup.
* fix(dashboard): name the sidebar's collapse and drawer buttons for assistive tech
The collapse toggle held only two unlabeled images, so screen readers
announced an unnamed button; it now carries a translated label and
aria-expanded that follow its state. The drawer's open/close labels were
hardcoded English and now go through i18n.
* fix(dashboard): make Home's recent apps reachable from the keyboard
Each recent app was a click-only div, so keyboard users couldn't open
one. They are now buttons with a focus ring; the icon is decorative
since the title names the button.
* fix(dashboard): name the Security tab's 2FA switch for assistive tech
The checkbox sat in a text-less label, so screen readers announced an
unnamed checkbox. It now carries the translated Two Factor
Authentication label, as the Teams switches do.
* fix(dashboard): sort the Usage table from the keyboard
The sortable headers were click-only th cells. Each now holds a button,
carries aria-sort, and keeps focus across the re-render a sort causes.
The Resource/Units/Cost headers go through i18n.
* fix(dashboard): don't rebuild the Files listing under an open menu
Returning to the browser tab re-rendered the folder even with a context
menu or action sheet open, so its actions then targeted detached rows:
Rename did nothing, Restore faded a row that was already gone. The
refresh now waits while a menu is up, as it does for a rename.
* fix(dashboard): point the Files sidebar's Documents at the current home
The entry read window.documents_path, which globals.js sets once from
the cached user and nothing updates; login and username changes keep
window.docs_path current instead. After a username change, Documents
pointed at the old home and showed "This folder couldn't be opened",
even after reloading.
* fix(dashboard): let only the newest share listing render in the share dialog
Each action ends in a refresh, and refreshes from overlapping actions (or
the opening load) could finish out of order, so an older listing landed
last and undid what the user just did, e.g. the link control snapped
back to restricted after turning the link on. Older refreshes now drop
their result.
* perf(dashboard): load a team's record, roster, and plan in parallel
loadSelected awaited the audit log (every page of it), then the members,
then the plan, on every visit to the Teams tab. They don't depend on
each other, so they are now fetched together.
* fix(dashboard): keep keyboard focus on the Teams control that was used
Every Teams action repaints the whole panel, which dropped focus to
<body>: a keyboard user toggling a switch or suspending an account was
sent back to the top of the page. The repaint now refocuses the same
control, or the same account's new action when the old one is gone.
* fix(dashboard): give the app uninstall prompt dialog semantics and focus
The prompt had no dialog role or label and never took focus, so keyboard
and screen-reader users stayed on the inert grid behind it. It is now a
labelled modal dialog that focuses Cancel on open and returns focus to
the app's tile when dismissed.
* fix(dashboard): keep the add-an-app tile when there are no apps
With no apps at all, the empty state replaced the whole grid, add tile
included, so a new user on an instance with no recommended apps had
nothing to act on. The empty line now sits above a grid that keeps the
tile, as a search with no matches already does.
* fix(dashboard): don't rebuild the Apps grid under an active drag
An uninstall finishing (or a failed one rolling back) re-rendered the
grid even while another tile was being dragged, replacing the dragged
tile with a fresh copy: the copy showed under the ghost and the drop
was lost. Renders asked for mid-drag now wait for the one the drop does;
the folder eject, which rebuilds the grid as part of the drag, still can.
* fix(dashboard): return focus to the drawer toggle when the mobile drawer closes
Closing the drawer (Escape, the close button, a tab pick) left focus on
controls that had just become hidden, so it fell to <body>; closing the
notifications sheet opened from the drawer tried to refocus the bell
inside the closed drawer. Both now land on the drawer toggle.
* fix(dashboard): truncate Files names between graphemes, with a binary search
The middle truncation sliced UTF-16 code units, so at many widths a long
name with emoji showed a half surrogate (rendered as a replacement
character) or a broken joined emoji. It also measured one more character
per step, a measureText call per character of every long name on each
render and column resize. The cut now falls between graphemes and is
found by binary search; output for other names is unchanged.
* fix(dashboard): translate the Home tab's hardcoded English
The tab label, the recent-apps empty state, card subtitles, the plan
badge and trial wording, the upgrade/manage links, and the usage cards'
"Used" / "of" lines were English literals. They now go through
i18n, with placeholders where values are interpolated.
* fix(dashboard): translate the sidebar's remaining English
The Apps, Files, and Usage tab labels, the user button's fallback name,
and the user menu's Developers item were English literals; they now use
i18n keys like the other tabs.
* fix(dashboard): translate the Usage tab's hardcoded English
The subtitle, the "used of" meter lines (now the existing used_of
key), Usage Details, the plan button, Show more/less, and the details
error were English literals.
* fix(dashboard): translate the Account and Security tabs' hardcoded English
Both subtitles, the delete-account description, the sessions hint, the
username fallback, and the avatar picker's window title were English
literals.
* fix(dashboard): translate the Apps tab's hardcoded English
The uninstall prompt and its failure alert, empty and no-match notices,
pager and folder-dot labels, the search placeholder, the edit toggle,
and the tile menu's Open in New Tab / Quit / Uninstall were English
literals.
* fix(dashboard): translate the Files tab's hardcoded English
The folder sidebar, footer counts (now the existing item-count keys),
sort and view menus, upload status and errors, the empty and
can't-open notices, the reserved-name alerts, the move error, and the
loading text were English literals.
* fix(dashboard): translate the action sheet's Back row and match delete in any language
The touch action sheet styled an item red when its label contained the
English word "delete", so Delete lost its danger styling in every other
language; it now compares against the translated Delete labels. Its
submenu Back row and the properties panel's Directory/disassociate
labels were English literals.
* fix(dashboard): make the Files sidebar, crumbs, and nav arrows keyboard-operable
The folder sidebar, the breadcrumbs, and the back/forward/up arrows were
click-only li/span/img elements, out of the tab order. They now take
focus, carry button/link roles (the arrows with labels and
aria-disabled), answer Enter and Space, and show a focus ring. The rows'
Enter/Space shortcuts also no longer swallow those keys from a focused
control: with rows selected, Enter on Upload opened the selection.
* perf(dashboard): read grid name widths before writing any in the Files tab
fitItemNames read each tile's name width right after writing the
previous name, forcing a layout per row. Reading them all first, then
writing, cuts switching 400 files into grid view from about 300ms to
170ms; the rendered names are identical.
* feat(ai): add Kling for video, image and speech generation
One `kling` API key now registers a provider on three drivers:
- txt2vid: Kling 3.0 Turbo, 3.0, 3.0 Omni, O1, 2.6 and 2.5 Turbo,
with first/last frames, reference images on the omni models, native
audio, and editing a source video on 3.0 Omni and O1. Billed per
second at the resolution, audio and video-input rate; an edit is held
at the longest source and billed for the clip Kling returns.
- txt2img: Kling Image 3.0, 3.0 Omni, O1 and 2.1, billed per image.
- txt2speech: Kling TTS with its English and Chinese voices, billed per
request.
Kling's business error codes map onto the driver error contract, so an
exhausted resource pack reports as credit exhaustion and a submit-time
content block as `moderation_flagged`. "Risk control" failures now
count as content-filter refusals.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(ai): treat Kling's unknown-model codes as a Puter-side failure
Kling answers 1202/1203 when the method or model isn't one it serves.
Puter picks both, so these meant catalog drift but surfaced as a 400 that
blamed the caller and raised no alarm. They now return 502 upstream_failed
with a warning alarm.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(ai): tighten Kling input checks and error mapping
- 3.0 Turbo takes at most 2,500 prompt characters with a first frame,
the image-to-video endpoint's limit.
- O1 refuses reference images together with a first and last frame.
- 3.0 Omni accepts a source of up to 15.5 seconds, and an edit is held
at 16 seconds to cover it.
- A source video Kling can't decode fails as 400 upstream_bad_request
instead of a Puter-side 502.
- A 1201 about the model counts as catalog drift, like 1202/1203.
- Auth failures no longer pass Kling's console wording to the caller.
Adds integration tests for the image, video and TTS providers, gated
on PUTER_TEST_AI_KLING_API_KEY.
* feat(ai): wait up to 14 minutes for a video job
Video jobs, Kling edits in particular, can take over 10 minutes. The
poll window and the Gemini Omni deadline move to 14 minutes, under the
SDK's 15-minute idle timeout, with holds and signed source links
lengthened to match. The keep-alive default moves to 920 seconds so it
stays above a 15-minute proxy idle timeout.
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
Sites and workers tied to an app go with it by FK cascade, on app delete and
on deleting the app owner's account. Only caches were dropped for them, so
the subdomain.delete listeners (CDN purge, worker script teardown, worker
sessions, site cleanup) never ran.
* feat(fs): finish a home rename that stopped partway
FSEntryStore.rebaseUserSubtree runs renameUserHome's owner-scoped
cascade on its own (same subtree matching, same rebased-cache
invalidation) and also drops the home row's cached copies at either
path. countUserSubtree counts the owner's rows under a prefix with that
same matching, from the primary. renameUserHome now uses the shared
cascade.
* fix(telemetry): resolve the tracer per span so a test's provider is the one used
withSpan held a ProxyTracer built at module load, which caches the first
provider it delegates to. Test files sharing a worker then sent spans to a
provider an earlier file had already shut down.
* fix(fs): drop cached copies of only the rows a home rebase moves
The owner-scoped rewrite read its invalidation set from everything under the new prefix, which for a finishing rebase is the whole live home; it now reads the rows it is about to move.
---------
Co-authored-by: Daniel Salazar <[email protected]>
`extension.claimSubdomain(name, { mainPipeline: true })` serves
`<name>.<domain>` the way core's own subdomains are served: through CORS,
body parsing, auth and every route, `subdomain: '*'` ones included. Routes
declared for the name are ordinary routes, with no option restrictions.
Gated claims (`{ authorize, checkRoute? }`) behave as before.
onlyoffice's subdomain now comes from its extension's claim, so core no
longer lists it among the subdomains it serves itself. Without that claim
`onlyoffice.<domain>` gets the unclaimed-subdomain 404 like any other name.
* feat(ai): edit a source video with txt2vid on Gemini Omni
txt2vid takes an `inputVideo` option (sent as `input_video`): a URL, data
URI or Puter file path to an MP4, QuickTime or WebM video of up to 32 MiB.
Gemini Omni receives it inline next to the prompt, which describes the
edit or extension. Google enforces the 10-second limit.
Models declare `videoInput` in the catalog, and the driver rejects a
source video for any other model instead of letting the provider drop it.
The credit hold adds 16,000 input tokens for a source video, since
countTokens reports far fewer tokens than the reply bills.
loadFileInput takes an optional `timeoutMs` for web URLs, and cancels
the body of a failed response.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* feat(ai): edit a source video with FLUX 3 on Together AI
FLUX 3 takes `input_video` as Together's `media.source_video`. A web URL
goes through for Together to fetch; a data URI or Puter file is read with
the caller's access, capped at 32 MiB, sniffed as a video and sent inline.
Editing is estimated and billed at the 1080p rate of $0.54/s, since FLUX 3
jobs report no cost. Image inputs can't be combined with a source video.
Seedance 2.0 ignores `source_video`, treats `reference_videos` as a loose
reference rather than an edit, and Seedance 2.5 fails on reference videos,
so neither declares `videoInput`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* docs(ai): name FLUX 3 as a video editor in the AI overview
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(ai): match Hailuo 02 to Together's price and document estimate billing
Together quotes $0.56 for a Hailuo 02 clip; the catalog had $0.49.
Together's video jobs no longer report what they cost, so every Together
clip is billed at the catalog's highest published rate. The docs said the
charge was the amount Together reports; they now describe the estimate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix: enforce video edit durations and propagate source fetch cancellation
* fix(ai): pass media inputs as Puter files and stream source videos
Source videos were read whole into the API process, base64-encoded and
sent twice to Gemini (countTokens and the interaction), which held about
128 MiB per in-flight edit for up to ten minutes.
- Video inputs are a URL, a Puter file path or a data URI of at most
1 MiB. Together gets a Puter file as a 15-minute presigned S3 URL and
fetches it itself; Gemini streams it into the request body with an
exact Content-Length, so it's never held as one string.
- Gemini counts only the prompt and image for a source video, and both
providers read the source only after the credit hold.
- txt2img and txt2vid image inputs accept Puter file paths, read within
the caller's access right before the provider call. Existing URL,
data URI and base64 inputs are unchanged.
- puter.js writes a Blob, File or data URI over 1 MiB to a temporary
file under .tmp, sends its path, and deletes it once the call settles.
- FLUX 3 edits bill at the 720p editing rate, matching their 1280x704
output.
* fix(ai): stage inputs after website sign-in, keep images working without a write
- puter.js chose the temporary file path before signing a website visitor
in, so it fell outside the app's data directory and the upload was
refused. It now signs in first, then picks the path.
- An image that can't be written (no access, storage full) is sent inline
as before instead of failing the call. Videos still fail, since a
large inline video isn't accepted.
- Telling raw JPEG base64 from a path decodes only the first 24
characters instead of the whole input.
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
* fix(gui): refresh Start menu apps without blocking cached rendering
* docs: remove desktop Start menu limits from SDK reference
* fix(gui): drop the 1 MiB cap on the launch-apps refresh
Recent entries carry each app's raw icon column, which can still hold a data URL of up to 5 MB, so a large icon tripped the cap on every request, including the one at startup, and left the Start menu with no apps. Replace the cap's test with one for the unlaunchable-app filter.
---------
Co-authored-by: Daniel Salazar <[email protected]>
The start menu read a session-cached launch-apps list and only refetched when it was empty, so an app deleted after page load (for example in Dev Center) stayed in Recent and Recommended until a reload. Refetch on every open, and filter out entries the backend marks unlaunchable, so a reclaimed or inaccessible app leaves the list too. Apply the same filter to the dashboard's Recent apps. Adds helpers/launchAppsList.js with filterLaunchableApps and its unit test.
Bounties cover user security/privacy and platform security/health only.
Reports must show a direct attack without pre-assumed access, and
exploits that rely on sharer/sharee trust are hardening or lower
severity. Also generalizes the metering non-issue, adds existence-only
oracles, and tightens duplicate, proof and first-contact rules.
* fix(ai): validate large base64 without anchored regexp loops
Gemini TTS replies over ~4 MB of base64 (~65 s of audio) failed with
"Maximum call stack size exceeded". Once a process holds enough compiled
code, V8 compiles new regexps unoptimized, and `^[...]+={0,2}$` then
pushes a backtrack entry per character until its stack overflows.
TTS now searches for a character outside the alphabet instead. The raw
base64 icon/reference-image check drops its own anchored regexp;
decodeStrictBase64 already rejects the same inputs.
* perf(ai): validate base64 by decoded length instead of regexp passes
Unoptimized regexp scans dominated large payloads: 186 ms for max-length
TTS audio, 880 ms in decodeStrictBase64 for 30 MB of video. Buffer.from
skips characters outside the alphabet, so comparing the decoded length
with the one the input length predicts catches them for free.
decodeStrictBase64 now does that plus rejecting the URL-safe alphabet
(~10 ms for 30 MB), and TTS reuses it instead of its own check.
Non-canonical trailing bits now decode instead of being rejected.
* fix(ai): reject non-ASCII base64 that Node decodes by its low byte
Node reads code units above 0xFF by their low byte, so U+012B decodes
as '+' and keeps the decoded length the input predicts. Require ASCII
(~1-2 ms for 43M chars) before the length check.
PROPPATCH now requires write access on the target, like PUT and DELETE,
and its response href goes through the request's share-path masker the
way PROPFIND's do.
Pipeline
- CORS preflights send Access-Control-Max-Age: browsers stop re-preflighting authed calls every 5 s.
- `req.ua` is parsed on first read instead of on every request.
- JSON `rawBody` reuses the parsed buffer instead of copying it.
- `emitAndWait` returns early when nothing listens: no span or closure per unlistened driver call.
- SQLBatcher sends a lone query on the next tick while fewer than 8 flushes are in flight, and
waits `maxTimeInQueue` as before otherwise. Lone reads skip the 10/30 ms wait; batching under
load is unchanged.
Auth and permissions
- Token-to-actor auth starts the user, session and app lookups together and checks them in the
same order: fewer sequential Redis round trips per authed request.
- get-user-app-token and check-app reuse the resolved app row. getOrCreateApp skips the re-select
after its own insert and doesn't wait on the cache write for replica rows.
- getOrCreateApp reads the race winner from the primary when its insert loses, so it no longer
hands out a session that was never written.
- whoami runs the email check and the OIDC/taskbar/team lookups in parallel; key order unchanged.
- OIDC providers are memoized once every discovery succeeds, with one discovery fetch in flight
per URL, and the Apple key is parsed once.
- gui-token and sync-cookie use `req.actor.user` instead of re-reading the user.
- listSessions batches app lookups. App icon probes run together, and the original-icon probe
skips the lineage fallback.
- Default-granted permissions are answered from config before the scan cache, and exploded
options are deduped: one less Redis read per /drivers/call.
- ACL resolves ancestors lazily (owners and full-access tokens skip them) and scans the node
first, then the ancestors concurrently on a miss.
Filesystem
- Missing-path lineage lookups run 10 at a time: batch-upload path resolution drops from about
1.3 s to about 40 ms per 100 new files.
- MySQL single-file inserts return the row built from the written values, falling back to the
primary read: one less primary round trip per new file.
- Batch thumbnails are stored with one UPDATE per chunk (200 rows or 4M chars), with a per-row
fallback.
- storage.quota.bonus listeners run concurrently next to the usage SUM, and the payload carries
`userUuid`: quota checks and /df no longer serialize the listener reads.
- readdir cache backfill is one pipeline instead of 3xN SETEX.
- Profile reads skip the lineage fallback; the own profile is read alongside the user lookup.
- Legacy /stat runs is_empty (new `hasChildrenByParentUid`), owner and thumbnail concurrently.
- Downloads and the video proxy pipe through `pipeToResponse`: aborts release the storage stream
at once with no extra 'close' listeners, and the video proxy no longer crashes on a mid-stream
upstream error.
- mkdir looks up target and parent together.
- Upload completion reuses the session from the access check (status is still re-read before
completing), and multipart signing reads it once.
- Moving a shared file to Trash skips two lookups that always returned the entry itself.
Drivers and events
- Subscription resolvers run concurrently and are folded in registration order.
- SubdomainDriver and WorkerDriver overlap independent lookups.
- The events "anyone subscribed?" check is one Redis pipeline when the region is warm.
- Handler publish overlaps the count with the size check.
- Broadcast flushes peers concurrently over a keep-alive agent, so a slow peer no longer delays
cross-region invalidations to the others.
Sites, share and AI
- Hosted sites resolve the owner first, then the app and root together. Site config loads only
on 404s. The hosted-app query selects only the columns it uses and moves into AppStore.
- shareFlags asks about the plan only when an item is shared by link only.
- Share listings run the count, teams and plan reads alongside their page query.
- Claude attachment cleanup no longer blocks the response.
- New util `awaitLater` for promises started early and awaited later.
* fix(metering): pin metering writes to one replica, fence settles, idempotent monthly claim (PUT-2001)
store-kv-v1 is a last-writer-wins global table, and every region settled
its metering buffer into its local replica, so concurrent increments to the
same per-actor item from two regions could drop one side. Writes and
consistent reads of metering:* and policy:actor:* items now go to the
dynamo.home replica.
Buffered settles record each write on the claim with a fence token before
sending it, and the KV store refuses a token the item already holds, so a
re-driven claim applies its write once. Claims are serialized per counter
within a cache so one writer's tokens land in order.
The monthly charge claim is a set-if-absent of a random token, and a failed
claim write keeps its token for the retry, so a write that landed anyway
still charges exactly once.
* fix(metering): drop home-replica pinning; keep addon consumption off the purchase record (PUT-2001)
Pinning every metering write and exact read to one replica put a
cross-region round trip on credit checks near the allowance and on every
settle, and made one region's outage stall metering everywhere. The
per-item clash it guarded against is rare and undercharges at most a
flush window.
The one clash that loses money is a credit purchase and an overage settle
landing on the addons item in different regions at once. Consumption now
goes to its own item and getActorAddons sums it with what the purchase
record already holds.
* perf(metering): read addon consumption only for accounts with purchased credit (PUT-2001)
* perf(metering): settle counters through a sliding pool instead of waves (PUT-2001)
* feat(metering): consistent-read option on getActorAddons (PUT-2001)
Admin credit checks read the purchase record directly to get a consistent
read, which misses consumption now that it lives on its own item. They can
call getActorAddons with consistentRead instead. Also formats the lines this
PR added.
Builds the "New > User templates" entries in helpers/templateMenuItem.js
and covers the label with tests, including HTML encoding of both the
extension and the name.
* Add Gemini Omni video generation with token metering
* Keep explicit Gemini video model selection within provider
* Settle reported Gemini video usage before validating output
---------
Co-authored-by: 404oops <[email protected]>
* feat(ai): add Gemini unary transcription
* Clarify transcription language results and omit pricing
* style(ai): keep Gemini transcription sources prettier-clean
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(ai-speech2txt): charge Gemini transcriptions that fail after Google answers
Google bills an interaction it processed whether or not it completed, so an
incomplete, failed or malformed reply was free to the caller and paid by
Puter; audio whose transcript overran the output cap could be resubmitted at
no cost. Usage is now recorded before the reply is checked, falling back to
the counted audio tokens when the reported usage can't be read.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Preserve transcript text with optional malformed annotations
* Keep speech provider spacing consistent
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(ai): keep Gemini speech instructions separate from transcript
* Clarify Gemini speech instructions
* style(ai-tts): keep Gemini cost comment prettier-clean
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Validate speech requests and settle reported Gemini usage
* Clarify speech settlement for unreadable responses
* Reserve the published Gemini speech token budget
* Clarify speech accounting for bounded responses
* Limit only Gemini TTS text to 3000 characters; charge overrun replies
The 3000-character text cap moves from the TTS driver into the Gemini
provider, so other providers keep their own limits.
The Gemini reply cap rises to 64 MiB, which fits the full 16,384-token
audio budget. A reply that still overruns it or times out reports no
usage, so it is charged the held budget and the error tells the caller
to split the text.
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
* feat(ai): restore available Gemini models and align pricing
* Exclude deprecated Flash Image additions and share scheduled pricing
* Bill Gemini 2.5 Pro at its current list rates
Cache reads are $0.125/M, and prompts over 200k tokens bill every rate at
the long-context tier ($2.50 in, $15 out, $0.25 cached).
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
* feat(ai): add Gemini 4 Argon with native usage metering
* test(ai): isolate Argon HTTP smoke test from optional extensions
* fix(ai): preserve Gemini native completion and refusal reasons
* Refer model specifications and pricing to the directory
* Bound unary Argon requests and reject unsupported content
* Keep Gemini tool metadata out of Claude requests
* Describe provider-specific chat timeout boundaries
* Keep Gemini extra_content off other providers; report Gemini timeouts as 504
Replayed tool calls only carry extra_content for providers that opt in
(Gemini), so OpenAI-compatible and Responses vendors don't see an unknown
field. The native Gemini client now owns its request deadline: the SDK's
own timeout aborted without a reason and read as an internal error. A
deadline timeout returns 504 upstream_timeout and leaves the route in
rotation.
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
* Handle model access denials and filter batch chat variants
* Raise a low alarm when a provider denies model access
A 403 model_not_found still returns 400 upstream_bad_request, but now
alarms at info so a lost provider entitlement gets noticed. HttpError
gains an alarmSeverity option the terminal alarm gate honors.
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Daniel Salazar <[email protected]>
* feat: bound provisioning by what an owner may mint, not only what is live
Seat and team caps express how much may exist at one time. This adds the
other half of the rule: how much an owner may create over a window, and the
checks a provisioned account answers to.
- Provisioning puts each seat through `SignupService.runSignupGate`, the same
extension-owned gate a signup answers, and refuses what it blocks. It fails
closed, since a check that could not run is not a check that passed.
- A per-owner budget over a rolling window, sized to every seat the owner may
hold live across every team they may own, times the churn allowed on top.
It is spent on creation and is not returned.
Keyed on the owner's uuid so a recycled id cannot inherit someone else's
spend, and charged after validation so a taken username costs nothing.
* refactor: tighten the provisioning gate and budget after review
- The gate runs before the seat-cap lock. A listener has no deadline and the
lease is ten seconds with nothing to renew it, so the lock must not be held
across one.
- `failOpen: false` rethrows rather than returning false, so a backend outage
is answered 503 instead of escaping the handler.
- An address goes through `validateEmail` first, as it does on every other
path that creates an account.
- The gate always runs; a request only enriches what it is told, so one being
absent is no reason to skip it.
- The gate is told it is looking at a seat, whose address is optional.
- A refusal carries the gate's own code and request code, as a blocked signup
does, so support can correlate it.
- Restored `provisionAccount`'s docblock, which an insert had displaced.
Tests: the spy restores in `finally`, and the cap overrides are taken after
the fixtures, so one failure cannot cascade through the file.
* fix: show a provisioning refusal as a rule, not a failure
The console special-cases the seat cap and sends everything else to
"Something went wrong", which reads as a fault rather than an answer. The
provisioning budget refuses the same way the cap does, so it is presented
the same way.
* fix: count one app open per account per app per day
`app_opens` is read two ways at once: `open_count` is a row count and
`user_count` is distinct accounts. A repeated open moves the first
without the first moving the second, and the incentive report prices
opens.
An open is now marked as it is recorded and skipped for the rest of the
day, before both the row and the event ClickHouse ingests, so the two
stores agree. The marker is set only when absent, so the first open of
the day wins a race; an unreachable marker counts the open, since
counting twice beats not counting.
* fix: count one app open per account per app per day, at the count
Dropped the row-suppression approach. `app_opens` is not only a counter:
`getRecentAppOpens` orders the desktop's recent list by `MAX(_id)`, and
`app.opened` is the socket event other tabs reorder on. Suppressing the
repeat row froze both at the first open of the day.
Every open is recorded as before. `open_count` counts each account once
per day instead, which is the figure `user_count` is read against.
`countDistinctUserDays` folds the pair into one number because
`COUNT(DISTINCT a, b)` is MySQL-only, and `dayBucket` covers MySQL's
decimal division. ClickHouse has uniqExact over the tuple.
Note the figure's meaning changes at deploy: a period spanning it mixes
rows with account-days, so a comparison across that point is not one.
* fix: count one app open per account per app per hour
Review feedback: a day is too long a window for the repeat to collapse
into. The period is now an argument rather than a baked-in 86400, held in
one constant on AppStore beside the other store policy numbers, so the SQL
and ClickHouse sites cannot drift and a future change is one line.
The fold `COUNT(DISTINCT user * N + bucket)` is only injective while the
bucket index stays under N. Hourly buckets are 24x the day index and pass
the old 1000000 in 2084, so N moves to 10000000.
Buckets are clock hours, not a rolling window, so two opens a minute apart
either side of the hour still count twice — tested, and the same property
the day version had at UTC midnight.
The detailed-stats fixture gave its repeat open a 60s offset, which under
hourly buckets would have counted twice whenever the suite ran in the first
minute of an hour. It now shares a timestamp with the open it repeats.
- relay sign-in popups take the opener origin from the referrer only
- session revokes read the primary, batch per user, and tombstone caches in every region
- wisp relay tokens bound to the minting session; verify rechecks the account
- hosted origins keep app identity with the site owner; deleted app uids recorded in deleted_apps
- subdomain cache tombstoned on delete, update, reclaim and app/account cascades
- email lookups require an exact address match after the SQL lookup
- workers deploy only from files the deployer owns
- share_app_data:false enforced at ACL time, plus copy/move/rename/share/recursive listing
- kv remove returns no value without read; kv:expire op grant usable
- fs errors name the entry instead of the owner's path
- shared-by-me drops rows a delegate no longer has authority over
- private apps can't move index_url onto another user's origin
- GUI: default apps saved and launched by uid; save picker accepts only copy/move; permission dialog waits for focus; Publish as Worker hidden on others' files
* fix: give every route behind the user-protected gate a password budget
Five of the six routes behind the gate declare a per-user hourly bucket
for the password check. The sixth, delete-own-user, declared none.
The bucket moves into the gate itself, so it covers every route behind
it and a new one cannot be added without one.
It is charged by the outcome rather than by the request: a wrong answer
spends one and a right answer spends nothing, so a caller who knows the
password never meets the limit.
* fix: the review's findings on the password budget
Reading the budget and spending it on the outcome bounded rounds rather
than attempts: everything already in flight read the same budget and was
answered before any of it was spent. The charge lands before the
comparison now, so a burst is bounded by the same number as a sequence.
The key gained a route component. One bucket across all six meant ten
mistyped passwords on one route closed the other five for the hour,
including the one an account owing its team's 2FA has to reach.
getObjectStream now attaches an 'error' listener to every body it returns.
A body that fails before its consumer attaches (socket timeout, reset, or a
checksum mismatch on a truncated read) used to emit 'error' with no listener
and exit the process, failing every in-flight request on the task. It now
logs a warning; consumers that attach later still receive the error.
* PUT-2012 fix broadcast service drops
* Revert pre-commit lint churn on files merged from main
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
* fix test bug
* Remove other test
---------
Co-authored-by: Claude Opus 5.5 (1M context) <[email protected]>
* perf(auth): renew godmode app tokens from cache instead of the primary
Every godmode launch read its token row from the primary and rewrote its
expiry, a few cross-region round trips per launch far from the primary.
- A cache pointer names the row per (user, web session, app). The row is
read through the uuid cache token auth uses and re-checked (owner,
session, app, revoked, expired, max age); anything else falls back to the
primary read. Revoking the row drops the pointer.
- The expiry write is skipped when it would move by under an hour. A
renewal that hits a revoked or lapsed row mints a new one instead.
- The response carries the row's actual expires_at.
* perf(gui): reuse a just-minted godmode token for repeat launches
A launch of a godmode app reuses the token this page minted for it within
the last ten minutes under the same desktop session, instead of asking
again. The cache is dropped when an app reports its token dead, after a
session revoke from the session manager or an uninstall, and across tabs
via a BroadcastChannel that carries token row ids, never tokens. A mint in
flight during a drop is not remembered.
Add interactive-widget=resizes-content to the mobile viewport meta tag
so the layout viewport shrinks when the soft keyboard opens. The app
window's height chain resolves against the layout viewport, so the
iframe folds up above the keyboard instead of clipping behind it.
- TTS sends output_format as the query parameter ElevenLabs reads; the body
field was ignored, so every request came back as MP3. Unknown formats are
rejected before credits are reserved, and the OpenAI-style names mp3, opus,
pcm and wav map to native formats.
- Voice IDs go straight to synthesis. The library listing omits voices that
still synthesize, the default 21m00Tcm4TlvDq8ikWAM among them, and runs to
9 MB per call. Names resolve through /v2/voices search, and premade voices
("Bella - Professional, Bright, Warm") also match their short name.
- speech2speech accepts HTTPS audio URLs through secureFetch, as documented.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Catalog gemini-nano-banana-2.1 (aliases google/gemini-nano-banana-2.1 and
nano-banana-2.1) at Google's standard rates: $1.50/1M input, $7.50/1M text
and thinking output, $30/1M image output, with 1K/2K/4K tiers at
1120/1680/3780 image tokens. 3.1 Flash Image stays the provider default.
Pre-flight credit checks assumed 50 text/thinking output tokens per image
for every Gemini model; live samples run 270-1122 depending on the model, so
each model now carries its own estimate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(rate-limit): count the newest KV rate rows first
The KV backend's rate check, peek and concurrent acquire list the key's
rows with a limit + 1 cap that the store applies before dropping expired
rows, so unswept rows from past windows (oldest keys) could fill the fetch
and the live count read as zero. They now list newest first.
* fix(broadcast): split webhook flushes under a byte budget, per-peer backlogs
Flushes go out in bodies of at most `broadcast.outboundMaxBodyBytes` (default
4 MiB) instead of one POST, and each peer keeps its own backlog of what it
missed, capped by count and four bodies' worth of bytes, oldest dropped first,
so one failing peer can no longer grow every peer's body past their 50 MB limit.
* fix(ai-chat): classify dropped upstream connections as provider failures
A connection reset or refusal (SDK APIConnectionError, Mistral's
ConnectionError, an undici reset on the cause) carries no status, so a chain
of them fell through to 500 internal_error. Attempts now record
connectionFailed; a chain of only resets and 5xx answers 400
upstream_provider_unavailable, and a reset counts as an upstream signal in a
mixed chain.
* fix(ai-chat): keep SDK retries on Anthropic count_tokens
The Claude client is built with SDK retries off so the driver can fall back,
but count_tokens has no fallback route. It now passes sdkRetryOptions, like
the OpenAI moderation call, so a transient 429 or reset is retried.
* fix(ai-chat): mark a route unhealthy for 60 s after a transient failure
With SDK retries off, one 5xx, 429, timeout or dropped connection kept a
route marked for 10 minutes, sending that model's traffic to resellers. Those
failures now mark the route for 60 s; bad credentials, an exhausted account
and other route-level failures keep 10 minutes.
* fix(metering): don't memoise spent addons inside the force-exact window
The spent-addons memo could cache a pre-grant record read from a lagging
replica right after a credits-changed announcement, so overage skipped the
new credit and requireCredits kept answering 402 for up to 15 s. A spent
record is now only cached once the actor's force-exact window has ended.
* fix(share): send the digest entries a flush claimed when another take fails
Digest entries are taken concurrently, and a single rejected take threw
away every entry the other takes had already removed from KV. The flush
now logs the failed takes and sends what it claimed; an entry whose take
failed stays queued for a later flush.
* fix(fs): announce an overwriting move's replaced entry only when it took its name
/move and v2 /fs/move looked up the entry at the destination name before
moving and always announced its removal. A move into someone else's Trash
renames instead of replacing, so the owner's desktop hid a live entry and
legacy /move reported it as `overwritten`. Both routes now pass the target
on only when the moved entry kept the name it was looked up by.
* fix(ai): name the vendor in upstream error fields from media providers
upstreamFetch now takes the provider id plus a display label, and
UpstreamResponseError carries the id. translateProviderError copies a
string `provider` off the error into `fields`, and the BytePlus video and
Cloudflare image errors set one, so upstream_auth_failed and
upstream_credits_exhausted alarms say which vendor failed again.
* fix(teams): delete a provisioned seat whose home folders could not be created
provisionUser logs a failed default-folder creation and still returns the
account, so provisionAccount went on to add the membership, issue a password,
mail the seat and emit team.account.created for an account with no home. It
now cascade-deletes the new user and returns 500 internal_error before any of
that.
* fix(ai-chat): load model catalogs without holding up server start
onServerStart awaited every gateway catalog (up to its 10s fetch timeout)
while HTTP was already listening, so drivers started after it had no
providers yet and chat requests found an empty model map. The first build
now runs in the background; complete(), models() and token counting wait
on it instead of failing.
* fix(ai-chat): serve direct models while gateway catalogs load at boot
The first model-map build now publishes a fresh map as each provider's
catalog lands, so static catalogs are routable at once. complete() and
token counting wait for the full first build only when the model, or the
provider asked for, isn't in the map yet. Refreshes still swap once.
* fix(ai-chat): split gateway-billed cost across input and output
A completion billed at the cost OpenRouter, Infron or Neuralwatt reports
was quoted to `ai.prompt.cost-calculated` as all input and no output. The
ledger still records one `billedUsage` line; the reported per-key costs now
spread that bill over the usage keys at the catalog's relative rates, in
whole µ¢ that sum to it. Neuralwatt energy units take no share.
* fix(ai-image): hold Replicate credits for the whole prediction
The output and input-surcharge holds took the default 10-minute TTL, the
same as the prediction window alone, so a slow prediction could outlive
them once creation and input measurement were added. They now last
15 minutes, like the video job holds.
* feat(ai-chat): report what a completion was charged as usage.cost
Chat usage (the non-stream result and the stream's final usage line) now
carries `cost`: the µ¢ the ledger records for the request after the cost
factor, from the request's recorded charges and the gate's factor lookup.
`usd_cents` is unchanged. A hooked recording now copies the usage object
first, so keys the driver adds later never land in the ledger.
* fix(ai): charge streamed speech once its first byte arrives
Per-character TTS and the voice changer recorded their charge when the
upstream's response headers arrived, so a body that failed before any audio
was billed in full. A shared relay now charges on the first byte, or when
the caller hangs up, and charges nothing for an upstream that fails or ends
before sending audio.
* fix(ai): release credit holds only after the request's usage lands
A hold was released as soon as its operation returned, while the usage it
stood for was still being written (behind the cost-factor lookup), so a
concurrent request briefly saw neither. AI metering now tracks the
request's usage writes and its holds (chat included) release once those
settle, without delaying the response; a streamed charge chains its own.
A failed write still releases the hold, and the hold's TTL backstops it.
* test(ai-chat): wait for a stream's credit hold to come back after its usage lands
* perf(fs): page subtree delete and copy by parent link, not by depth over the path range
Each page of a recursive delete or copy sorted the whole remaining subtree by a
computed depth, so a walk cost grew with the square of its size. It now pages
the children of up to 100 sibling directories at a time by parent_uid, depth
first, keyset on (parent_uid, id), so a page reads only its own rows; rows with
no stored path are reached too. SQLite gets the parent_uid index the others have.
* fix(fs): find children by parent_uid in the empty check and supplementary-name lookup
Rows the old backend wrote carry parent_uid and no parent_id, so a non-recursive
delete of a directory holding only such rows passed the empty check and orphaned
them, and on MySQL the supplementary-character child lookup missed them, leaving
their subtrees out of listings, counts and renames. Both now key on parent_uid;
the empty check still probes parent_id too, which the delete cascade follows.
* docs(fs): drop the single-POST note from the entry broadcast cap
Renaming or moving a directory rewrote its descendants' paths but left their
cached copies (by id, uuid and old path) live for up to 60 s. A lookup of an
old path kept resolving, and a write beneath one landed at a path its parent
no longer had. updatePathPrefixForUser and renameUserHome now drop those keys,
here and, within the broadcast budget, in peer regions.
puter.js sent `cursor=null` for `listShared`/`listSharedByMe({ cursor: null })`,
which decoded to null and failed every keyset listing with a 500. decodeCursor
reads it as no cursor, and the SDK no longer sends it.
startBatchWrite and startWrite created directory items and missing
parents before (or alongside) the storage reservation, so an over-quota
start paid for every directory write, left the directories behind, and
waited on them before returning 413. File targets are now resolved and
storage reserved first; directories are created only after, and the
reservation is released if that fails.
Upload sessions shared the system namespace's single partition key. They
now go to one of 16 system partitions hashed from the session id, via a
new system-actor-only `systemPartition` KV option; partitions are never
cached and emit no mutation events. Reads fall back to the unpartitioned
key for sessions written before this (max session lifetime is one hour).
listDescendantsInOrder, which drives paged recursive delete and copy, still
used a bare `path LIKE` range, so on MySQL a child whose name starts with a
supplementary character (and its subtree) was skipped: delete left it to the
parent_id cascade and copy dropped it. It now ORs the subtree patterns like the
other subtree queries, paging each pattern group with the same seek and
merging the pages in order.
* refactor(stores): one read-through RowCache for UserStore and AppStore
UserStore and AppStore each carried the same multi-key row cache: key
builder, cache read, tombstone-guarded backfill, broadcast refresh,
invalidate and tombstone-on-delete. They now share RowCache on PuterStore,
which also single-flights concurrent misses for one key and batches
getByIds/getByUids: one pipelined tombstone check for the loaded rows and
one pipelined backfill instead of per-row awaits. Cache keys and TTLs are
unchanged.
* perf(apps): invalidate cached app lists by generation, not by tracker scan
Every app write SMEMBERS'd a global set of every cached list key, parsed
each key back into its filters and deleted the matches. List pages are now
keyed by their owner's generation token (or a shared one for unscoped
lists), and a write replaces the tokens it affects: O(1) per write, and a
page loaded before a write can no longer be cached after it.
* refactor(stores): one keyset page helper for store listings
Thirteen store listings each cut a LIMIT n+1 read to a page and sealed the
last row's position, and each opened an id cursor its own way. They now use
keysetPage() and openIdCursor() from util/pagination. Cursor payloads and
sealing are unchanged; a cursor without a usable id still fails with 400 in
ShareStore and still restarts the listing elsewhere (strict option).
* refactor(stores): delete store methods nothing calls
AppStore.existsByIndexUrl, OIDCStore.unlinkByUserId,
TeamStore.listByOwner/listActiveSeatUuids, SubdomainStore.getByDomain/
listByDomain, FSEntryStore.ensureDirectoriesForUser,
ShareStore.listByIssuer/listByRecipientEmail/deleteByRecipientEmail/
getDailyShareCount/listByHolderAndFsentries and
PermissionStore.invalidateScanCache/deleteUserUserPermsByPermissionPrefix
had no production callers. ShareStore.listByFsentries was a copy of
listReaching; its callers use the latter.
SubdomainStore SMEMBERS'd a per-user prefix-list tracker on every write and
broadcast its deletion, but nothing ever wrote that set or cached a prefix
listing. The reads are gone.
* refactor(stores): shared escapeLike and bumpGeneration helpers
escapeLike replaces the LIKE escaping copied into PermissionStore (twice),
ShareStore and FSEntryStore, and now also guards SubdomainStore's prefix
filters, which passed caller prefixes into LIKE unescaped.
bumpGeneration sends INCR and EXPIRE in one pipeline instead of two awaited
commands in PermissionStore, EventSubscriptionStore and PresenceStore.
* refactor(stores): read affected rows off WriteResult
Every database client returns affectedRows and anyRowsAffected, so the
`affectedRows ?? changes ?? 0` fallbacks in ShareStore, NotificationStore,
UserStore and UserBlockStore read those directly.
* perf(stores): batch flat-permission KV deletes and durable cache drops
PermissionStore deleted each flat KV entry with its own kv.del; one
kv.batchDel now covers the set. DurableSubscriptionStore's suspend and reap
dropped each row from the cache separately; EventSubscriptionStore gains
dropDurables, which drops them per owner in one pass, and dropDurable calls
it. suspend keeps one conditional UPDATE per row, which is how concurrent
settles learn which rows each of them suspended.
* refactor(fs): fold FSEntryStore's duplicate getters, sort maps and cache keys
- getEntryByUuid and getEntryById share one by-column getter.
- listChildren and listChildrenPage read one sort table; the offset listing
now coalesces NULL modified/size like the cursor listing, so both order
NULLs the same way on every engine.
- Entry cache keys come from one builder instead of hand-built strings.
- getEntriesByIds, getEntriesByPaths and the per-user path reader fetch
their cache hits in one pipelined round trip instead of a GET per key,
through readCacheValues, which RowCache.readMany now uses too.
* fix(apps): cache the row a lost createFromOrigin race reads from the primary
Keeps AppStore's private #writeCache as a RowCache write, so code that
still calls it (#4166's read-back) loads in either merge order.
* perf(ai-chat): cache gateway catalogs with one remote-catalog helper
cachedRemoteCatalog serves a fetched catalog for 15 minutes, shares one
in-flight fetch between callers, abandons a fetch after 10 s, remembers a
failure for 30 s and keeps the last good value through a failed refresh.
Together, OpenRouter, Infron, Neuralwatt (models and quota) and Ollama use it
in place of their kv-singleton caches. The cached value is the converted
catalog, so a completion no longer re-coerces the whole gateway catalog
(OpenRouter did it twice per request). Ollama now refreshes instead of caching
its first non-empty list forever, and Together's catalog failure no longer
rejects models().
* refactor(ai-chat): build every chat SDK client with retries off
sdkClientOptions() gives each OpenAI, Groq, Together and Anthropic client
maxRetries: 0 and an explicit timeout. The SDK default of two retries, each up
to the full timeout, stacked under the driver's three-route fallback chain; a
failed attempt now goes straight back to the driver, which marks the route
and moves to the next provider for the model.
Timeouts keep what each provider already had: ten minutes, Groq's SDK default
of one minute, and Claude's 10 m 0.6 s. Non-streaming Mistral calls, which had
no timeout once a cancellation signal was passed, are bounded at ten minutes.
The Azure providers are left for after the open Azure fixes land.
* refactor(ai-chat): meter every OpenAI-family completion through one pricing path
meterChatUsage records a completion's usage at buildCostsOverride's rates, or
as one billedUsage line when the gateway reports what it billed, and returns
the per-key costs it recorded. Providers hand those to the driver through the
usageCosts channel, now carried by the Chat Completions handlers too, so the
usd_cents and cost-calculated figures equal the ledger. The driver's own
#computeCost is replaced by pricing.ts usageCost, which shares the rate
resolution with buildCostsOverride.
Billing changes, all toward what the upstream charges:
- DeepSeek, Moonshot, Alibaba, Groq, MiniMax, Z.AI, Hoonify, BytePlus and the
Neuralwatt catalog fallback took cached reads out of prompt_tokens nowhere,
so a cached token was billed at input + cache rate. splitCachedPrompt bills
it once, at the cache rate; usage.prompt_tokens on those routes now excludes
cached reads, as it already did for OpenAI, Gemini and Meta.
- Catalog entries that listed cached_tokens: 0 (38 Alibaba, 5 Groq) relied on
that double count to bill cached reads at the input rate. The zero is
dropped, so they keep exactly that price through the input-rate fallback.
Neuralwatt models with no published cache price likewise.
- An unpriced key falls back to the input/output rate instead of NaN (0), e.g.
OpenRouter cached reads on its no-cost fallback path.
- A gateway-reported cost of 0 records 0 µ¢ rather than 1 µ¢.
Claude, Azure and xAI keep their metering; xAI's cached-token handling waits
on the open Grok decision.
* refactor(ai-chat): one OpenAICompatProvider for the OpenAI-compatible vendors
DeepSeek, Moonshot, Alibaba, Groq, MiniMax, Z.AI, Hoonify, BytePlus, Together,
Gemini, Meta, Ollama and the complete() paths of OpenRouter, Infron and
Neuralwatt were copies of one Chat Completions call. Each is now an
OpenAICompatOptions entry (client, catalog, metering prefix, wire-id prefix,
max-token param and default, passthrough fields, openAICompatParams scope,
message cleanup, image inlining, stream usage, context-length retry) plus the
hooks its API needs: prepareMessages (DeepSeek, Groq, Gemini), vendorParams
(MiniMax, Hoonify, Z.AI, BytePlus, Meta, OpenRouter, Infron, Neuralwatt),
meteredUsage (Gemini and the gateways) and reportedUsage (Neuralwatt). xAI is
left until the open xAI fix lands.
Deliberate changes:
- Tools go through make_openai_tools for every vendor (six did, ten sent them
raw): Anthropic-only tool extras and server tools no longer reach these
upstreams, and an empty tool list is omitted.
- Model lookup is one indexed, case-insensitive pass per catalog for every
vendor (Together and Neuralwatt already ignored case).
- Per-provider console logging of upstream errors is gone; the driver logs
every failed attempt.
- Every vendor honours a configured apiBaseUrl.
tool_choice forwarding stays as each vendor had it (MiniMax, Hoonify, Z.AI
auto-only, BytePlus, Meta auto-only, OpenRouter); widening it needs each
vendor's support confirmed.
* perf(ai-chat): resolve the model once in the driver and keep its map fresh
The driver hands each provider its own catalog entry for the route it chose,
so providers stop re-resolving the id per request; the OpenAI-compatible
providers only look an id up (indexed, case-insensitively) for a direct
caller, and an unknown id is a 400 instead of silently becoming the default
model. Gateways with mixed-case ids (Infron, Neuralwatt) used to miss the
driver's lowercased id and fall through to that default.
The model map is now built from every provider's catalog in parallel, with a
failing catalog left out rather than aborting the build, swapped in whole,
awaited in onServerStart, and rebuilt every 15 minutes so gateway catalog
changes reach routing without a restart.
* refactor(ai-chat): drop provider surface and OpenAIUtil code nothing uses
- list() leaves IChatProvider and every provider that isn't Azure or xAI
(both wait on the open fix for those files); only tests called it.
- OpenAI Chat, OpenAI Responses and Meta no longer inline puter_path parts:
the driver does it before every attempt, so theirs found nothing to do. The
stores and FS service they took for it go too.
- providers/ChatProvider.ts had no subclasses.
- OpenAIUtil: one hoistToolUseBlocks for the Chat and Responses message
passes (Responses keeps canonical_id), and the dead create_usage_calculator,
unused Responses deviations and constant mode/toolblock are gone.
checkModeration stays on IChatProvider: the open Azure moderation fix calls it
through that interface.
* refactor(ai-chat): register keyed providers from one table
Sixteen near-identical blocks in #registerProviders, with three constructor
argument orders, become a { name, configKey, Class } table read by one loop;
every entry takes (config, metering) and gets apiBaseUrl when configured.
Claude, Azure, OpenAI (sibling wiring), Ollama (enabled unless turned off) and
the fake provider stay explicit. Gemini's constructor takes config first like
the rest.
* fix(ai-chat): send Ollama the model name it listed
Ollama catalog ids are ollama:ollama/<name>, built from /api/tags. Only the
ollama: part was stripped, so the local server was asked for ollama/<name>, a
model it doesn't have. Strip the whole ollama:ollama/ namespace.
* fix(ai-chat): keep SDK retries on the OpenAI moderation call
The completion clients run with SDK retries off so the driver can fall back.
A moderation check has no fallback, so it passes the SDK's default two
retries per request.
* refactor(ai): route TTS, STT and voice-changer REST calls through upstreamFetch
upstreamFetch bounds a provider call with AbortSignal.timeout and throws an
UpstreamResponseError carrying the upstream status and code, which the
/drivers/call boundary maps like any SDK error. Replaces five hand-written
status translators (ElevenLabs TTS, xAI TTS, Speechify, xAI STT, voice
changer); caller-facing messages are now sanitized by the shared mapper.
* perf(ai): bound input image fetches and share one data-URI parser
fetchImageBytes now streams under a byte cap (30 MB by default) with a
30-second timeout, via a readBoundedBody helper shared with loadFileInput's web
branch and Replicate's input measuring. assertInputImagesShape caps
input_images at 16. Chat image inlining uses fetchImageBytes instead of
buffering with no timeout. fileInput, imageInput and mediaParts parse data URIs
through one parseDataUri.
* refactor(ai-tts): one per-character metering path for TTS providers
meterPerCharacter holds text length x price, runs the synthesis and meters the
same amount once it succeeds; characterCostReport builds the per-character
cost lines. Both sit on a new withAiCreditHold (reserve, run, release) that
Gemini TTS uses directly. SAMPLE_AUDIO_URL is defined once. The TTSProvider
base class is gone: its methods were stubs every provider overrode, and only
Polly read its untyped providerConfig.
* refactor(ai): one ProviderRegistry and key reader for the AI media drivers
ProviderRegistry holds a driver's provider catalog (ids, default, aliases) and
its configured instances: alias resolution, the not-found 400, default
fallback and parallel 'all' listing. TTS, speech-to-text, OCR and the voice
changer route through it. readProviderKey reads apiKey, secret_key, api_key and
key in that order for every AI media driver, so providers.xai.secret_key now
enables xAI TTS as it already did xAI image and speech-to-text. ElevenLabs
caches its voice list for 10 minutes, as Polly does.
* perf(ai): stream TTS and voice-changer audio instead of buffering it
OpenAI, xAI and ElevenLabs TTS and the voice changer hand the upstream body
straight to the caller through upstreamBodyStream; their costs are known
before the call, so nothing waits on the download. A body that fails
mid-stream ends the response early instead of raising an unhandled stream
error. xAI speech-to-text keeps one copy of the audio (the upload Blob)
instead of up to three. The voice changer and xAI STT hold credits through
withAiCreditHold.
* perf(ai-ocr): read Puter files only when the provider needs the bytes
resolveFileInput resolves and access-checks a Puter file and defers the read
to load(); loadFileInput is that plus the read. OCR resolves first: Textract
reads the object straight from S3 and downloads it only if Textract can't
reach the bucket, and only Mistral loads the bytes. A file over the size cap
is refused from its recorded size before any read. countPdfPages inflates
object streams on the libuv pool instead of the request thread.
* perf(ai): build image and video model catalogs once and share output saving
ModelCatalog holds what the public model routes serve (models, sorted names,
cost lines), computed once after boot instead of on every listing. The video
driver now awaits its model map before serving. resolveOutputPath and
saveGeneratedMediaToFS replace the copies of puter_output_path handling in
both drivers, using expandTildePath and normalizeAbsolutePath. The video
driver normalizes a copy of the caller's args instead of mutating them, and
its never-taken stream branch is gone.
* fix(drivers): abort the response when a streamed driver result fails mid-body
upstreamBodyStream now errors when the provider body fails instead of ending
cleanly, and DriverController pipes stream results through pipeStreamResult
(stream.pipeline): a failed source destroys the response so the client sees
an aborted transfer, the failure is logged once, and nothing is left to raise
an unhandled stream error. A client hanging up stops the source.
* fix(drivers): drop a streamed driver result when the caller already hung up
pipeline() throws synchronously on a closed destination, which surfaced as
a 500 alarm on every early disconnect and left the upstream body open.
* fix(ai): bound streamed upstream calls by time to first byte, not download time
upstreamFetch takes a `stream` option: the timeout covers the request until
the response (or a non-2xx error body) is read, then is cleared so a body
piped to the client drains at the client's pace. ElevenLabs TTS, xAI TTS and
the voice changer pass it; non-streamed calls keep the full-response bound.
A stalled upstream body is still cut by undici's body idle timeout.
* fix(drivers): type pipeStreamResult's response by the members it uses
* perf(workers): skip hot-reload lookups for files no worker is bound to
The fs.write.file / fs.remove.node / fs.move.node listeners listed every
workers.puter.* row of the file's owner on every event, for every user.
The event's FSEntry already carries the worker rows bound to it, so a file
with none returns before any I/O; a bound file reads just its own rows,
batched, from the primary.
* perf(apps): read the uid alias only after a direct lookup misses
Every AppDriver uid lookup fired an uncached system-KV GetItem for the
merge alias in parallel with the direct read, even when the direct read
hit. The alias is now read only on a miss.
* refactor(apps): one app view with the launch gates, built by AppService
AppDriver's serializer and its private-app / hosted-backing gates move to
AppService.views, built on a pure toAppView that is the one place
index_url is withheld. AppDriver, the subdomains driver's embedded apps and
the GUI shell view all use it. Visibility of protected apps
(filterReadable) moves with it.
Subdomain embeds (associated_app, app_owner) used to return index_url with
no gate; they now withhold it from a viewer who may not open a private app
or whose hosted backing is gone, and carry privateAccess, godmode and
feedback_enabled like a direct app read.
* refactor(apps): one toAppSummary; batch the recommended and taskbar lookups
SuggestedApps, RecommendedApps, /get-launch-apps and the taskbar each built
their own launch summary; they now share toAppSummary (the extra
feedback_enabled / external flags appear on the lists that lacked them).
getRecommendedApps awaited getByName once per recommended app (29) and
getTaskbarItems did the same per taskbar entry on every whoami; both now
make one batched call per key through the new AppStore.getByNames, which
keeps getByName's case-insensitive and old-name matching. The taskbar's
raw UPDATE of the user row goes through UserStore.update, and
/get-launch-apps checks hosted backings in one batch and reaches the
stores without casts.
* refactor(apps): app routes read through AppService; /delete-site calls the subdomains driver
AppController used the global driversContainers through a getter whose
boot-order comment no longer held; it uses the injected drivers and
AppService. GET /apps/:name looked each name up, read it again through the
driver and resolved private access a second time, emitting
app.privateAccess.resolveLaunch twice per private app; it now batches the
names and resolves once. POST /query/app did a lookup, a driver read and a
raw app_filetype_association SELECT per selector (up to 200, serially); it
now makes one batched lookup per key, one grant check and one filetype read.
The driver's read shape is a pure toAppReadView both use.
HostingController's /delete-site re-implemented the subdomains driver's
delete (protected check, delete, subdomain.delete event); it keeps its
owner-scoped 404 and calls the driver. Hosting and Desktop controllers drop
constructors that discarded the drivers argument, and trivial getters.
* refactor(drivers): one per-method policy validator and resolver; drop @Driver
Four policy blocks (rateLimit, concurrent, requireSubscription,
requireReputation) share the { default, methods } shape but each had its
own validator and resolver. They become validatePerMethod(value, label,
policy) and resolvePerMethod(cfg, method); error messages are unchanged.
The @Driver class decorator and the prototype keys it wrote had no users
outside its own tests; drivers declare their fields, and resolveDriverMeta
reads only those. DriverController takes the driver name from the meta it
already resolved instead of probing the prototype.
resolveDriverMethodRateLimit/Concurrent stay as deprecated aliases for the
email extension.
* refactor(drivers): shared actor guards and crud-q concurrency policy
The apps, subdomains, workers and notifications drivers each carried a
private #requireActor, two carried the same #requireVerified, and apps and
subdomains the same owner/app_owner write predicate. These become
requireContextActor, requireContextUserActor, assertActorEmailVerified and
actorOwnsRow in core/actor.ts; each driver keeps its own error for the
cases that differed (system actors still read apps; notifications still
answer 403 for an actor without a user). The identical crud-q concurrency
block is one CRUD_CONCURRENT constant.
The metering, installedApps and appTelemetry extensions re-checked an actor
their routes already require; those checks and the tests for them go.
* refactor(extensions): store methods instead of raw SQL in OSS extensions
installedApps and appTelemetry queried user_to_app_permissions directly
and metering read apps by name with its own SELECT. PermissionStore gains
listAppsGrantedByUser, listAppAuthenticatedUsers (with the email-share
check folded in) and countAppUsers; metering uses AppStore.getByName.
* refactor(server): one layer builder and one lifecycle hook runner
PuterServer built each of its five layers with its own copy of the same
loop (built-ins, then extension additions, into the layer and its export
container), and ran each lifecycle hook with five near-identical loops per
hook. Both are now one helper each: #instantiateLayer and
#runHook(order, hook). Construction order, the args each layer receives,
and hook order (start and prepare bottom-up, shutdown top-down) are
unchanged.
* fix(workers): tear down a deleted source's worker after its FK nulls root_dir_id
* refactor(auth): one signup path for form, temp, OIDC and team accounts
Signup steps (validate hook, phone/card forcing, bonus verdict, provisioning,
signup events) move from AuthController and OIDCService into SignupService.
Username rules, availability and generation move to util/username.ts, and
user-row + group + default-folder creation to provisionUser, which
TeamService and DefaultUserService now share.
Behaviour fixes: a provisioned team seat joins default_user_group like every
other account, and generated temp usernames skip names whose home path is
occupied.
* refactor(auth): one web-session start for password and OIDC sign-in
startWebSession creates the session with the request's IP, user agent, origin
and host and sets the session cookie. OIDC sign-ins used to create their
session without that metadata, so they showed up blank in the session list.
* refactor(auth): one confirmEmail for the code and link confirmation routes
Both routes now re-run the email checks, refuse an address another account
confirmed, strip it from other rows, promote the group and push
user.email_confirmed to the account's sockets (with the originating socket id
on the code route). The link route's full-table UPDATE clearing other
accounts' pending change-email requests is dropped: /change_email/confirm
already refuses an address a confirmed account owns.
* refactor(auth): build window.user once for whoami and sign-in
buildUserDetails and scrubSensitive move from the whoami extension into
util/userDetails.ts. /whoami calls them; sign-in responses now return the same
user-actor payload, scrubbed, so the login copy no longer ships the phone
number and a no-reload login gets oidc_only/otp/directories up front. Taskbar
resolution is best-effort on both.
* refactor(http): userProtected route option replaces AuthController's route walker copy
The user-protected gate is materialized from a userProtected RouteOption
(implies requireUserActor), so AuthController no longer re-implements the
decorator walker to wire it per instance; those routes and the session
routes are plain decorators now. AuthRequired also counts requireVerified
and userProtected.
* refactor(http): internalAuth route option and a shared bodyRecord
EventsController and PeerController each checked x-puter-internal-auth by
hand with different compares; an internalAuth RouteOption now picks the
secret from config and one constant-time gate checks it. ShareController and
EventsController share bodyRecord instead of private copies.
* fix(fs): cap legacy /delete at 500 paths per request
The bulk form resolved, ACL-checked and removed an unbounded paths[] list one
by one. It now refuses more than FS_BATCH_WRITE_MAX_ITEMS (500), the cap the
batch write routes already use, before touching any entry.
* refactor(controllers): user and subdomain writes and reads through their stores
AuthController's 2FA setup/enable/disable and recovery-code writes go through
UserStore.update instead of raw UPDATEs plus a manual invalidate, and
/readdir-subdomains pages SubdomainStore.listByUserId instead of an unbounded
SELECT; the response shape is unchanged.
* refactor(auth): note SignupService's call-time peers
* fix(auth): type userDetails' taskbar deps independently of TaskbarDeps.clients
* perf(socket): re-check live sockets without touching their sessions
The 5-minute sweep reused the request-path authenticate(), which slid
every connected session's expiry and wrote user activity each tick, and
could fill SessionStore's touch-throttle map. authenticate() now takes
touch: false for re-checks; the sweep uses it, checks credentials
through runWithConcurrencyLimitSettled, and a call while a sweep runs
joins it instead of starting another.
* perf(acl): read a scoped token's grants once per check
ACLService.check did a Redis GET + JSON.parse of the token's grant list
for every ancestor x mode, and the permission scan did the same per
option. Both now read the list once (PermissionStore.listAccessTokenPerms,
which replaces the per-permission hasAccessTokenPerm) and test it in
memory.
* refactor(metering): incrementUsage goes through batchIncrementUsages
incrementUsage was a copy of the batch path that let an infinite amount
through and skipped NaN, where the batch path counts either as one unit.
It now calls batchIncrementUsages with a one-entry batch, so both apply
the batch clamping (documented on batchIncrementUsages). The overuse
alarm loses the single-path fields nothing sets any more.
* perf(metering): memoize an actor's spent addons on the increment path
Every increment and credit refresh read the actor's addons record from
the KV store. A record with no purchased credit left can only change
through a grant, and every grant announces credits-changed, so it is now
kept per actor beside the credit memo and dropped with it. Records with
credit left are still read fresh, since increments on other nodes draw
them down without announcing it. A read that straddles a drop isn't
kept.
* refactor(services): route raw table writes through their stores
- access_token_permissions: AuthService inserted grants one row at a
time through a cast to the store's db client, read the authorizer, and
deleted the manifest with raw SQL, then asked PermissionStore to drop
its cache. PermissionStore now owns insertAccessTokenPerms (chunked
multi-row insert), deleteAccessTokenPerms and
getAccessTokenAuthorizerId, and invalidates inside the writes.
- TeamService's 2FA reset clears the OTP columns through UserStore.update.
- AppIconService's data-URL icon swap is AppStore.replaceDataUrlIcon.
* fix(user): correct cascadeDelete's FK note; seat cleanup is best effort
The header said most user_id foreign keys are ON DELETE SET NULL; the
migrations cascade nearly all of them and keep SET NULL for audit and
analytics history. forgetSeat ran unguarded after the row was already
gone, so a cache failure there failed the whole delete; it is now
logged and stepped over like the other teardown steps.
* refactor(acl): one grant/revoke path per holder kind
ACLService's user and group stat/set pairs were copies differing only in
which PermissionService methods they called. They now share #stat and
#set over a holder adapter ({ lockKey, query, grant, revoke }); lock keys
and errors are unchanged.
PermissionService's eleven grant/revoke methods repeated the same guard
blocks. Each keeps its own order of checks, now through shared helpers
(#requireUserId, #refuseAppActor, #assertCanManage, #requireUser,
#requireApp, #assertFitsColumn, #audit), so every refusal keeps its
status, legacyCode and wording. Audit writes stay fire-and-forget.
* refactor(auth): one hosted-asset token API keyed by kind
The private-asset and public hosted-actor cookies had separate create/
verify methods, four cookie-name getters and two identical options
getters, differing only in the kind claim and what the host field was
called. They are now createHostedAssetToken(kind, claims),
verifyHostedAssetToken(kind, token, expected),
getHostedAssetCookieOptions(), and the exported HOSTED_ASSET_COOKIES
names. Token claims, cookie names and every error message are unchanged;
puterSite and privateAppGate call the new methods.
* refactor(auth): one revoked/expired check for every actor builder
The session, app-under-user and access-token builders (and the access
token's parent-session check) each spelled out the same revoked/expired
tests. They now share #endedSession, which returns the same reauth
results; only a session token passes its auth_id. Adds coverage for an
access token whose parent session expires, is revoked, or is gone.
* refactor(acl): read ancestor chains from FSEntryStore and share one fs ACL helper
getAncestorChain (split a path, batch-read the entries) moves to
FSEntryStore, with getAncestors for callers that want the rows. Services
read it from the store instead of calling FSService sideways;
FSService.getAncestorChain stays for drivers and extensions.
ACLService gains fsDescriptor (memoized chain), assertFsAccess,
assertFsCreate and refusal, plus the pure aclRefusal mapping. The eight
hand-rolled descriptor and safe-error copies in FSService, ShareService,
events/authorization, FSController, legacyFsHelpers, LegacyFSController,
AuthController and WebDAVController use them. Each route keeps its
status, legacyCode and message: fs routes answer access_denied on a 403,
the legacy routes still hide refusals from apps as 404, share and events
keep forbidden and their own 404 text.
* perf(fs): page recursive deletes and batch their event dispatch
A recursive delete read every descendant into memory, and an empty-check
for a non-recursive one did the same. It now walks the subtree a page at a
time in descending path order (children before the directory holding
them, so the parent_id cascade never takes a row before it is handled),
deleting objects and rows and publishing each page as it goes. A
non-recursive delete probes with one LIMIT 1 query.
Removals publish once per entry, after the row is gone (the same change
as the open fix for the double emit), with one surviving-ancestor chain
read at most once for the whole subtree. Events-API dispatch for a batch
runs as one background task at bounded concurrency instead of a
fire-and-forget promise per entry.
FSEntryStore gains hasDescendants and listDescendantsInOrder (keyset
paged by path, then id).
* perf(fs): copy directories a level at a time
A directory copy walked every descendant in memory and copied them one
by one: an insert per directory and, per file, an S3 CopyObject, a
batchCreateEntries of one and its read-back. It now pages the source in
ascending path order (parents before children) and takes each page a
depth at a time: rows for directories, links and empty files at bounded
concurrency, then the depth's S3 copies at bounded concurrency and one
batchCreateEntries for all of them. A single-file copy goes through the
same path.
A failed S3 copy still fails the call (a ghost file still answers 404),
but only after the objects that did copy have their rows, so nothing is
left in the bucket unreferenced. Copied entries publish per depth in one
dispatch.
* refactor(share): build masked share paths in one place
sharePathMask exports maskedRoot(owner, uuid, name) and
maskUnder(root, realPath). ShareService's maskedPathVia goes, its
maskedSelfPath and shareDeepLink's maskedSharePath build on them, and the
masker, maskUnderAnchor and learnShareRoots use maskedRoot. Output is
byte-for-byte the same; tests pin it.
* fix(share): send old_path on a recipient's item.moved
The desktop's item.moved handler reads old_path; ShareService sent the
former masked path only as from_path. Both are sent now.
* perf(share): skip the audience lookup for owners with nothing shared
Every fs write, create, rename, move and delete looked for share
recipients: an ancestor walk plus two share queries, for an owner who in
nearly every case has shared nothing. #sharesReaching now reads the
chain through FSEntryStore.getAncestors (no third copy of the walk) and
asks a per-owner "has anything shared" flag before the share queries.
The flag is the per-user cache events already keeps for subscriptions
(SubscriptionCache): one ShareStore.ownerHasShares read per owner per
TTL, coalesced across a burst. Creating a share (user, team, claimed
invite) or moving a subtree to a new owner bumps it locally and over
outer.pubsub.share.ownerShared; the TTL covers a process that misses
the bump. A failed lookup reads as shared, so the full lookup decides.
* perf(share): batch the per-row reads behind share listings
Share listings looked things up one row at a time:
- teams by id: TeamStore.getByIdsIncludingDeleted (the single-id read
calls it) for listSharedByMe, listSharesOf and #revokeGroupSharesBy
- team shares per node and ancestor: ShareStore.listGroupOnFsentries,
one query for the chain, in the same node-then-ancestor order
- #liveGroupGrants: PermissionStore.queryIssuerGroupPermsByPrefixes
reads every issuer/group pair under every prefix in one query
- #revokeGroupSharesBy: the five canManagePermission checks per row run
together instead of one after another
- ShareNotificationService #unblocked: users via getByIds and blocks via
UserBlockStore.blockersAmong, two queries instead of two per member
- digest flush: entries are taken at bounded concurrency rather than one
at a time
* perf(events): ask background consent once per holder and app on a revoke settle
Withdrawing events:background re-checked consent row by row, resolving the holder's actor and asking the permission service for every one of their background rows. Rows of one holder and app stand on one consent, so it is asked once and shared.
* refactor(events): drop the registry's unused push fields
notify, defaultDelivery, PushMessage, NotifyProjection and pushProjection were read only by registry.test. Every subject was unpushable and broadcast by default; the subscription's delivery class stays in DeliveryClass, which the stores use.
* refactor(share): retire trashed shares through onEntryOwnerChanged
onEntryTrashed was a copy of onEntryOwnerChanged: the same subtree share sweep, grant retire and row delete.
* fix(fs): page subtree walks by depth, not path
MySQL sorts a PAD SPACE string on its first max_sort_length (1024) bytes,
so under utf8mb4_unicode_ci paths past about 512 characters tie and fall
back to id. A file moved under a newer directory then sorted after it: the
delete walk reached the directory first and the parent_id cascade took the
file without its object delete or event, and the keyset skipped or
repeated rows. Pages now order by segment count, then id, which no
collation can reorder.
* fix(share): cache an owner as shared when the bump arrives
A bump only dropped the cached answer, so the next lookup could read a
replica that hadn't applied the new share yet and cache "nothing shared"
for another TTL. The bump now records "shared" outright.
* fix(fs): probe a directory for children by parent_id, from the primary
* fix(fs): keep the copied-size check in the batched directory copy
A copied file records the size CopyObject actually duplicated; growth past
the source row is charged against the allowance, and a copy that no longer
fits is deleted and refused, as a single-file copy already does.
* refactor(util): add BoundedTtlMap for core caches and log throttles
One size-capped, LRU-evicting map with an optional TTL and a once-per-window
shouldEmit helper. Replaces the hand-rolled maps in the DynamoDB throttle and
repair loggers (the repair one was unbounded), the Slack repeat throttle, the
auth probe's reauth log throttle, and the card-verification status memo.
* perf(http): skip route lifecycle work when nothing listens
The per-route lifecycle middleware built a payload, opened an
event.emitAndWait span and hooked finish/close on every request, listeners
or not. Each phase now checks hasListeners first. EventClient's three copies
of the key-prefix walk become one memoized #matchKeys.
* perf(ddb): write batch chunks concurrently and retry the TTL sweep
batchPut/batchDel sent their 25-item chunks one after another; they now run
up to four at a time through runWithConcurrencyLimit, and a failed chunk
stops the ones not yet started. batchGet and the batch write share one
#sendWithUnprocessedRetry instead of two copies of the backoff loop, and the
TTL sweep goes through #batchWrite, so the unprocessed deletes it used to
drop are retried. The AWS and local clients are built by one #bindClient.
* refactor(db): share migrations and tryHardRead in the base client
MySQL and Postgres each carried a copy of the migration-path runner and of
the replica-racing tryHardRead; both now live on AbstractDatabaseClient
(applyMigrationPaths, and tryHardRead gated on hasReadReplica), and SQLite
drops its own tryHardRead override. Removes MySQL reinitPrimary,
reinitReplica, isRetriableError and readWithRetry and the base requireRead,
which had no callers outside tests. SQLite prepared statements and the
Postgres SQL rewrite are memoized per query text in a bounded map.
* refactor(rate-limit): route every entry point through one charge()
The nine rate/peek/acquire entry points each repeated key and limit
resolution, the backend call and the fail-open catch. They now share
charge(), routeKey() and guardSlot(); log lines are unchanged. Driver
concurrency slots release at most once like the other slot handles, and
checkRateLimit takes { failOpen: false } for limits that must hold when the
backend is down.
* refactor(util): add secretsEqual for constant-time secret comparison
One HMAC-then-timingSafeEqual helper, safe for inputs of any length, so
callers stop hand-rolling the length guard. File signature verification
uses it.
* refactor(fs): infer signed-file MIME types with mime-types
mimeFromName looks extensions up in mime-types instead of a 35-entry inline
table, keeping the two types the table reported differently (ico, wav). The
purpose-labelled signing key is derived once per secret instead of on every
signature, where signFile derived it twice.
* refactor(http): build route gates from one gate() helper
Each gate repeated a try/catch -> next(err) wrapper or a .then(next, next)
chain around an assertion. gate(check) does that once: a throw or rejection
goes to next(err), and a synchronous check still calls next synchronously.
The credits, subscription and reputation gate files held nothing but such a
wrapper; their factories move into gates.ts and the files go.
* perf(hosting): build the puter-site hosting config once
createPuterSiteMiddleware rebuilt the normalized hosting-domain config on
every hosted-site request; it is derived from static config, like the domain
lists the middleware already builds at construction.
* fix(db): tryHardRead's replica leg doesn't fail over to the primary
MySQL's read() retries on the primary after a load-shed or transient
replica error, so routing tryHardRead through it read the primary twice
on that path. The replica leg now reads the replica alone.
* fix(ddb): settle in-flight batch chunks before rethrowing
A failed chunk stopped unstarted chunks but rejected while others were
still retrying, so writes could land after the caller had handled the
error and invalidated its cache.
* fix(fs): include supplementary-character names in subtree path queries on MySQL (PUT-2135)
MySQL ends the idx_fsentries_path range for `path LIKE 'p/%'` at 'p/' +
U+FFFF, and utf8mb4_unicode_ci sorts supplementary characters above it, so
a child whose name starts with one (most emoji) was skipped with its whole
subtree by listing, delete, copy, rename/move rewrites, counts and sizes.
On MySQL, FSEntryStore now looks up those children by parent_id and ORs a
LIKE pattern for each onto the subtree match, recursing into directories.
Every extra pattern starts with the prefix, so only the scanned ranges
widen; rewrites past 500 patterns run in several statements.
The prefix rewrite also passed a UTF-16 length to SUBSTR, which counts
characters, so a rename under a path holding an emoji dropped characters
from every descendant path on all engines. It now counts code points.
* test(fs): seed the supplementary-name subtree with createNonFileEntry
* fix(redis): release locks with an atomic compare-and-delete
ACLService, TeamService and the share digest flush each hand-rolled a SET NX
lock whose release was a GET-then-DEL (or a blind DEL), so a holder whose TTL
lapsed could delete the next holder's lock. They now share withRedisLock,
which claims with a random token and releases via a Lua compare-and-delete.
* chore(team): place the redis lock import with the other runtime imports
* fix(fs): send the same outer.gui.item.* payload from every fs controller
The v2 /fs/move and /fs/delete routes spread the raw camelCase FSEntry into
item.moved / item.removed and named the old path `from_path`, while the
desktop reads the legacy snake_case shape and `old_path`. One helper,
emitGuiItemEvent, now builds the payload for LegacyFSController,
FSController and WebDAVController.
v2 and WebDAV copy/move with overwrite now also emit item.removed for the
entry they replace, as the legacy routes do, and v2 /fs/move forwards
new_metadata to the service like the legacy /move.
* fix(fs): announce a replaced entry before the one replacing it
The desktop hides rows by path on item.removed, so a removal sent after the
overwriting copy's added (or move's moved) hid the new row too. The shared
emitter now takes the replaced entry and sends its removal first, awaited,
on the v2, legacy and WebDAV copy/move paths.
Share invites, share notifications and app feedback checked addresses through
EmailClient.clean/validate, a second copy of the rules in util/email.ts that
stripped dots on iCloud, stripped `+tags` on every domain, and matched the
blocklist case-sensitively. They now use util/email.ts: isBlockedEmail for the
blocklist, abuseKey for the per-address notification budget, and cleanEmail
for the invite digest key. EmailClient keeps transport and templates only.
isBlockedEmail also lowercases the configured suffixes, so a mixed-case
blocklist entry still matches.
FSService, OIDCStore, UserStore and TeamService each carried their own
duplicate-key check. FSService only matched mysql and the bare
SQLITE_CONSTRAINT code, so the mkdir/move race recovery never ran for a
SQLite or Postgres unique violation. OIDCStore matched any message
containing "UNIQUE" or the bare SQLITE_CONSTRAINT code, UserStore any
SQLITE_CONSTRAINT_* code, and TeamService any message mentioning unique or
duplicate. All four now use util/dbError's isUniqueViolation; UserStore
still checks the index name on top.
* fix(fs): route thumbnail writes through FSEntryStore
Add FSEntryStore.updateEntryThumbnailByUuid, which sets a thumbnail with
no owner check (callers authorize) and refreshes the entry cache, with an
optional expected-value guard.
The thumbnails extension's inline data: URL migration, its copy
duplication, and the legacy /update-fsentry-thumbnail endpoint now write
through it instead of raw UPDATEs, so cached entries stop serving the old
thumbnail. The migration validates the image like the upload path, awaits
the write, and only repoints a row that still holds the data URL; a read
that loses that race deletes its upload.
* fix(fs): report a thumbnail update by whether the row changed
updateEntryThumbnailByUuid returned the refreshed entry, which is null
when the cache misses and the replica hasn't seen the row yet. The
read-time migration took that null for a lost race and deleted the object
the row had just been pointed at. It now returns whether the UPDATE
changed a row; the cache refresh still runs after it.
Azure entries that front an OpenAI or xAI model now come from a `mirror`
helper that copies every non-identity field from the source catalog entry.
The hand-copied entries had drifted: none carried `long_context_pricing`, so
long prompts on Azure-served gpt-5.4 and Grok 4.3/4.20 were billed at 1x;
grok-4.3 had lost `pdf` input and the Grok 4.20 deployments still listed the
old 2M context. Models no longer in the direct catalogs stay inline.
xAI sent a fixed max_tokens of 1000, ignoring both the caller's value and
the credit gate's cap. It now forwards max_tokens like the other
OpenAI-compatible providers and omits it when unset.
Azure chat's checkModeration threw "Method not implemented", so
`moderation: true` on an Azure route metered the completion, then failed it
as a route error: Azure was marked unhealthy and the fallback billed a
second completion. Azure's v1 API has no /moderations endpoint, so both
Azure providers now delegate moderation to the OpenAI chat provider
(Azure chat via its Responses sibling, as it does for web_search).
A moderation call that throws is now a 400 `moderation_unavailable` that
the driver treats like `moderation_flagged`: final, no fallback, and the
route stays healthy.
AlarmClient kept every alarm id it had seen for the life of the process,
and ids that embed a user, key or invoice grew it without bound. The
registry is now ordered by last occurrence: alarms idle for 24 hours are
dropped on the next create, and past 1000 the least recently raised goes
first. Clearing or evicting an alarm only removes its short-id alias when
the alias still points at it.
* fix(cache): broadcast fs entry and team invalidations to peer regions
FSEntryStore's invalidations called publishCacheKeys without broadcast,
so a delete, move, rename or overwrite only cleared the writer's
cluster; other regions served the old row until the 60 s TTL. They now
broadcast. Batch paths (deleteEntries per chunk, the batch overwrite)
send one event for the whole batch. Read-path backfills stay local.
TeamStore's busts were a local redis.del, so a removed member kept
passing getMembership in other regions until the TTL. They now go
through publishCacheKeys with broadcast, and softDelete busts every key
in one call.
Remove FSEntryCacheInvalidationEventHandler. It re-derived the same
invalidations from outer.gui.item.* with a replica SELECT per holder,
and its fs.remove.node branch never ran (FSEntry has no get()). The
store's own broadcast covers what it did.
* fix(fs): cap how many entry invalidations a node broadcasts per window
FSEntryStore now broadcasts at most 10,000 entries' cache invalidations
per broadcast flush window (outbound_flush_ms, 2 s by default). Past
that, keys are dropped locally only and peers fall back to the 60 s
entry-cache TTL; the store logs once per window when this happens.
Each flush goes to a peer as one POST that is re-sent whole on failure,
so a large recursive delete could otherwise build a batch the peer
rejects on every retry. The budget is per store instance, not per call,
so a delete issued page by page is bounded too, and single-entry writes
count against the same budget.
#removeDescendantsStorage emitted fs.remove.node for every file
descendant while grouping S3 keys, and remove() emitted it again for
every descendant after deleting the rows, so file listeners ran twice.
Drop the storage-pass emit; remove() now emits once per entry after its
row is deleted.
* fix(stores): read rows back from the primary after writing them
ShareStore (create, upsertPending, upsertActive, upsertActiveGroup,
applyPending, upsertAnyone), AppStore (create, createFromOrigin, update,
claimOwnership), NotificationStore.create, SubdomainStore.update and
NotificationDriver.create returned the row they had just written by
reading it back through `db.read`, which goes to the replica. Under
replica lag that came back null or stale. Those read-backs now go to the
primary, through a `primary` option on the getters. AppStore caches the
primary copy on create, and claimOwnership no longer reads through
getById, which cached the replica's pre-claim row on a miss.
* fix(stores): skip the notify read-back; read OIDC link conflicts from the primary
NotificationStore gains `insert`, which writes and returns the uid;
`create` is now `insert` plus the primary read-back. NotificationService
.notify ignores the row, so it uses `insert` and no longer pays a primary
round trip per recipient. NotificationDriver.create still reads the row
back from the primary.
OIDCStore.link reads the conflicting row from the primary after a unique
violation, so a replica that has not seen another account's link can no
longer make the call report success.
* perf(stores): return written rows instead of reading them back
ShareStore.create, NotificationStore.create, AppStore.create and
AppStore.createFromOrigin build the row they return from the values they
inserted and the insert id, instead of reading it back from the primary.
The DB-defaulted creation timestamp is now written explicitly from unix
seconds (`timestampFromUnixSql`), so the returned value matches what a
read returns (`timestampValue`); postgres INSERTs add RETURNING id. The
AppStore rows fill every column the INSERT leaves to the schema and are
cached as before.
ShareStore.upsertPending's re-invite branch selects the full pending row
in its dedupe read and returns it with the new mode and data; it falls
back to the primary only when the UPDATE matched nothing.
The remaining primary read-backs stay and say why: the share upserts and
the new-invite insert (an upsert's surviving uid/created_at and the
entry-owner subquery are only known to the primary), applyPending and
claimOwnership (only an id or uid in hand), AppStore.update and
SubdomainStore.update (the base row is a replica copy that would be
cached), NotificationDriver.create (notify returns only the uid) and the
OIDC link conflict.
A copied file's row took its size from the source row the request had
resolved, which can predate an overwrite whose bytes CopyObject then
copied. The copy now reads the new object's size and records that. When
it is larger than the source row said, the allowance is checked again
against the real size; a copy that no longer fits is refused with 413
and its object deleted.
If the size check fails, the copy falls back to the source row's size,
as completing a signed upload already does.
Image and video providers checked the balance with hasEnoughCredits /
getRemainingUsage and took no hold, so concurrent requests each saw the
full balance until the first one recorded usage. They now reserve the
estimate through the cost-factored reserveAiCredits and release it in a
finally block once usage is recorded, like chat, speech and OCR.
The video duration clamp now prices seconds at the model's cost factor
and holds the clamped clip's cost for the job (poll window plus create
time). Replicate holds the output-only estimate before fetching inputs
and the input surcharge on top once it is measured.
- SocketService's prepare-shutdown hook awaited io.close(), which also
closes the http server and waits for every HTTP connection to end. A
connection mid-request when close() runs stays open for the keep-alive
timeout, so shutdown stalled before PuterServer severs connections. The
hook no longer waits on the http close.
- Test servers disable Ollama unless a test configures it. Its boot probe
logged after files had ended, which failed shared-worker shards with
EnvironmentTeardownError.
- vitest ignores that teardown error for a console call still in flight.
- setupPuterTestEnv boots again on a fresh port after EADDRINUSE, and a
failed setupTestServer start shuts the server down.
- UploadReservationStore expiry tests pin the clock instead of racing a
50 ms TTL.
The stall watcher kept only the longest gap, so a saturated loop with many sub-second stalls still failed database-liveness. It now sums blocked time across the probe (ignoring timer jitter) and reports total and longest.
`extension.claimSubdomain(name, { authorize, checkRoute? })` lets an
extension serve `<name>.<domain>` without a hard-coded reserved name.
- A claimed host is dispatched where the unknown-subdomain 404 used to be,
before CORS, the OPTIONS responder, body parsing, auth and every route
(including `subdomain: '*'` ones).
- `authorize` returning anything but true, or throwing a non-HttpError,
yields exactly the unknown-subdomain 404. A thrown HttpError goes to the
error handler.
- Routes whose `subdomain` is the claimed name (decorated controllers and
extension routes alike) are materialized onto the claim's own router, so
they only run after `authorize` and never on the main app. Their options
are limited to ones that don't rely on the main pipeline's actor; an
optional `checkRoute` lets the claim refuse routes at boot. Case-variant
labels and claimed names mixed into subdomain arrays fail the boot.
- The unknown-subdomain check now compares the port-stripped hostname and
requires a dot boundary, so a host with an explicit port behaves like one
without it. Hosts served by the local worker proxy still pass through.
- The per-account overspend alarm now reads in credits and raises at
warning so it reaches the pager instead of only chat.
- A non-stream completion with no choices (an upstream answering 200 with
an error body) threw a TypeError that classified as internal_error and
paged critical. It now throws bad_response, which falls back like any
other empty response and surfaces as a 400.
- /send-pass-recovery-email for `admin`/`system` (by username or email)
returns the usual generic message, writes no token, sends no mail, and
raises a critical alarm with the requester's IP, user agent and, when
signed in, their user.
- /verify-pass-recovery-token and /set-pass-using-token reject recovery
tokens for those accounts as no longer valid.
* fix: let a revocation be seen by the reads and the nodes that outlive it
Four places where a revoke lands on the primary and the next reader can
still be told the old answer.
The u2a cache key was dropped but not re-filled, so the next miss read a
replica that may still carry the row and cached it for the TTL -- and a
revoke's own settling pass is usually that miss. It re-fills from the
primary, as the u2u side already does.
A revoked session dropped its keys the same way. It now leaves the
revoked row in the cache, read from the primary, so there is nothing for
a lagging replica to re-introduce.
A link share is its own authority rather than an index over a
permission, so a replica still carrying a withdrawn row answers with it.
For a short window after one is withdrawn, those reads go to the
primary.
Socket eviction rode a local event, so it only reached the node that did
the revoking. It is announced on the fan-out channel too, which is where
the node actually holding the connection hears it.
* refactor: carry the revocation on outer.* instead of outer.pubsub.*
Eviction runs through `io.in(room).disconnectSockets()`, which goes via the
socket.io Redis adapter a cluster shares, so one node handling the event
disconnects that user on every node in it. Fanning out to siblings had each
of them repeat the same cluster-wide disconnect.
The adapter's Redis is per-cluster, so peer clusters still need the hop --
`outer.*` reaches them and skips the sibling fan-out. The local
`auth.sessions.revoked` goes with it: `outer.*` fires on the emitting node
too, and nothing else subscribed.
* fix: a signed overwrite lands on the live key only once its completion is accepted
A presigned overwrite URL was signed against the live object key, so the
browser's PUT replaced the owner's bytes directly. That PUT never passes
through Puter, which leaves the access check on `completeWrite` with
nothing left to protect: by the time it runs, what /read serves has
already changed.
The upload now goes to a key of its own. `completeWrite` is already the
authorized step, so that is where the staged object is copied onto the
live key, server-side, and the staged one dropped. The entry keeps its
uuid, so everything written against it still holds. Aborting deletes the
staged object, which the old shared key made unsafe to do.
`copyObjectOfAnySize` carries the copy past the single-request ceiling
by copying part by part, so a large file is no different.
Two behaviours follow from the key no longer being shared: completing an
overwrite that uploaded nothing is refused rather than reported as an
overwrite of unchanged bytes, and abort always drops the session's
object. Only the two presigned paths changed; `prepareBatchWrites`
uploads server-side within one authorized request and still writes in
place.
* fix: the review's findings on the staged overwrite
The batch signed path still signed against the live key, so the route
the SDK's signed upload actually takes was unchanged. It stages now,
which also makes the abort simplification safe: the guard that had
protected a shared key was removed while that path still shared one, so
aborting a batch overwrite would have deleted the owner's object.
The completion is allowed against a path but lands on the uuid captured
at start, and a move between the two puts the bytes somewhere the caller
was never authorized for. The promote refuses unless the entry is still
where the check looked.
The batch promote failing left every session pending with its lease
held; it now fails them as the rest of the function does.
The pending GUI tile and the thumbnail key were keyed on the staged
uuid, which no entry ever carries, so neither correlated with what the
completion emitted. Responses carry `entryUid` for that.
* fix: do not treat a pre-staging session's key as this upload's own
A session signed by the previous release points straight at the live key,
since `objectKey` was `existingEntry?.uuid ?? uuidv4()`. Completing one is
already handled -- the promote returns early when the two keys match -- but
abort deleted `objectKey` unconditionally, which during a rolling deploy
would take the owner's file rather than the upload's litter.
Abort now deletes only a key the upload owns. The multipart branch was
always safe: discarding parts never touches an object already in place.
* fix: settle which default plan an org seat resolves to, and what counts as paid
Default subscription resolvers ran in registration order, which is boot
order: whichever layer registered first answered first. A seat is
provisioned by a team and its address is never confirmed, so the seat
resolver now states a priority and wins over anything a deployment
infers from an address.
The seat cap asked whether the owner's plan was outside the free set,
which a default plan can be without anyone having bought it. Metering
now reports whether an explicit subscription answered, and the cap rests
on that.
* fix: the review's findings on plan resolution
`fromDefault` was read off which resolver answered, not off which policy
applied. An explicit id naming a policy nobody registered falls through
to the default one, and that read as bought. It follows the applied
policy now.
A deployment with unlimited metering has no explicit resolver, so every
owner on it became unpaid and its teams dropped from the paid seat cap
to the free one. Unlimited answers for what a paid plan would, so it
counts as one.
Also: the new constants had been placed between `FREE_SUBSCRIPTION_IDS`
and its docblock, the register docstring still described first-wins, and
prettier had reflowed an untouched licence header.
* feat: a seat confirms the address its team typed in
An address on a seat is the team's claim about someone else's inbox, and
nothing asked the inbox. It is now demanded and sent a code, so the
address counts for nothing until the seat hands it back. Resolvers that
read a domain are the reason this matters.
No address is still fine and demands nothing: the team is the trust
anchor for the account, not for a mailbox it does not hold.
`/confirm-email` allows an unconfirmed actor, so a seat can sign in with
its temporary credential and clear the demand; nothing locks it out.
* fix: clear the confirmation demand with the address it names
`clearUnconfirmedEmail` releases a seat's address so the inbox's owner can
sign up with it. The demand to confirm that address has to go at the same
write: the gate reads `requires_email_confirmation && !email_confirmed`, and
once the address is gone there is nothing left to send a code to.
* fix: keep a seat's address correctable, and only ask what can be answered
Review of the confirmation demand turned up two ways a seat could be left
holding one it had no way to meet:
- With no mail transport configured, the code is never sent and a resend
cannot reach the seat either, so the demand stood with nothing able to
lift it. The seat is now gated only when a code can actually travel.
- An address the owner mistyped gated the seat on an inbox nobody could
read, and the gate itself closes `/user-protected/change-email`, the
route the seat would have fixed it by. `updateSeatEmail` lets the owner
who typed the address retarget it, and refuses once it is confirmed,
when it belongs to whoever proved it.
Also resolves the owner's plan sequentially, so the second read takes the
cache the first wrote and the pair cannot come from two resolutions, and
restores the licence header a jsdoc reflow had rewrapped.
* fix: let the confirm-email window open before the profile has loaded
Booted from a stored token, the window renders before `window.user` is
populated, and reading `.email` off null threw inside the window itself --
so the one screen that could have asked for the code never drew, leaving a
blank page. Reproducible without a team: sign up, then load the GUI again
before confirming.
The address is now encoded rather than interpolated raw, and both forms of
the line are i18n keys; it was hardcoded English before.
* fix: keep a file name to one line in a subject, and the inbound total to the account
**A name reaches the digest subject as the user typed it.** Subjects compile
with `noEscape` on purpose -- a header is not HTML, and escaping would show
entities to the reader -- and the comment there says free-form values collapse
whitespace upstream. A file name does not: `#assertUsableName` refuses only an
empty name, a slash, `.` and `..`, so a name may carry newlines. It is
collapsed to one line and bounded before it goes in.
**`includeTotal` answered an app with the account's figure.** The page is
filtered by what the caller can reach -- an app sees only what its user handed
it -- while `countByHolder` counts every inbound share. The docs already call
`total` an approximation for the filtering; they did not cover an app reading
the size of everything else. It is answered only for a caller acting as the
account now, and the page documents that.
The team-share fixture built its actor as `{ user }` with no `effectiveApp`,
which reads as an app rather than a session. A session acts as the account, so
it says so.
* fix: stop `see` reaching inside a folder, and bound mode changes
**A `see`-only folder recipient was pushed every child's name, size and type.**
The fan-out picked holders by reach -- any live grant on a reaching root -- and
`see` is a grant. But `see` says a node is there; `list` is what says what is
inside it, and the payload carries exactly what `list` would: name, path,
`is_dir`, type, size, modified. Descendants now go only to a holder whose mode
reaches inside. A change to the shared node itself still goes to everyone who
holds it, which is what `see` covers.
**Mode changes skipped the daily quota entirely.** Not spending share budget is
right -- changing a mode is not new reach, and the existing test says so -- but
unbounded it lets one account write a pair as fast as it can ask. They have
their own budget now, ten times the share limit by default and configurable,
so the exemption stays an exemption from *that* budget rather than from any.
* fix: let a half-finished downgrade be finished, and stop Trash answering
**A mode downgrade that failed between its two halves could not be repaired.**
`setUserUser` grants the new mode and then revokes the superseded ones. If the
revokes did not all land, the higher grant stood -- and the retry returned
early, because the mode it was asked for was now present. "Nothing to do" now
means this mode is the only one standing, so asking again is what finishes it.
The same two halves, and the same early return, were in the group variant.
**Trashing someone else's item answered for what is in their Trash.** Moving
into the owner's Trash is deliberately authorized without write on it -- that
is what lets a recipient delete from a shared folder -- but a name collision
there came back as `An entry already exists at /owner/Trash/<name>`. The mover
picks the name, so that is a question they can ask about a folder they cannot
list. It dedupes instead, which is also what the GUI wants: trashing should
not fail over a name.
* perf: record the entry's owner on the share row
The outbound listings answer "shares on things I own that someone else issued"
by joining `share` to `fsentries` and filtering on the owner there. Neither side
of that join bounds the work: driven from `fsentries` it walks every file the
user owns, driven from `share` it walks every share until it has a page. For a
user who owns a lot and delegates nothing, that is the whole table for an empty
result. `#outboundAppsSql` is worse than the ticket says -- it has no LIMIT at
all, so every call aggregates the join across both tables.
The owner now rides on the row, indexed with `id`, so all three read it
directly. An entry cannot change owner -- a move out of the owner's tree is
refused -- so it is written once, with the row.
Set in SQL from `fsentry_id` rather than threaded through callers: four insert
sites, each of which already has the id, and none of which can now forget.
The risk in denormalising is a write path that does: a row with no owner
recorded is a share that silently stops appearing in its owner's listing. The
new test covers exactly that -- it fails when one insert is made to write NULL.
Verified against a real boot: a pre-existing share row, on a database that
genuinely predates the column, comes out with the owner its entry has.
* fix: the review's findings on this branch
**The Trash collision still had both halves open.** `overwrite` was checked
before the trash case, so a caller setting it -- it is wire-supplied -- could
still delete whatever it collided with in the owner's Trash, and the 409
survived for anyone who did not. The trash case is decided first now.
Dedupe alone did not close it either: a name that changes only when there is a
collision answers the same question the refusal did, and the mover sees that
name even though the path is masked. Trashing someone else's item renames it
every time, so the result carries no signal. `original_name` already records
the real name, which is what a restore reads. Two tests pinned the old name;
they say what it is now.
**The owner column had no fallback.** Reads went only through it, so a row
written by anything that predates it -- a pod mid-roll -- would never appear in
its owner's listing again. The three reads now also cover `IS NULL` rows
through the old join, indexed on the null and empty once none remain.
**The grant became conditional on a replica read.** `if (!already)` skipped it
on a stale row while the revokes below stayed unconditional, which could leave
the holder with nothing where the old early return left their access alone. It
grants unconditionally again; only the early return changed.
**The re-issue budget covered one path of four.** Team, link and invite
re-issues reserved nothing, so three ways round it were left open. They share
one `#reserveRemodeQuota` now.
Two docblocks had been pushed off the functions they describe, and two comments
still described the join that is gone.
* chore: one-line the comments added here
* test: measure the prefix walk by what it keys on, not by the clock
`checks many long paths without re-reading every prefix of each` gave
the walk 1500ms of wall clock. It measured nothing useful: the shape it
guards against — keying each step on the accumulated prefix text rather
than on the parent id — costs 29ms against the current 8ms on that
input, so both ends sit far under the bound. Under coverage the same
test ran 1511ms and failed, which is the only thing the number could
ever report on.
`PathPrefixIds` now counts the characters it keys on, and the walk is
asserted on that: proportional to the input, and twice the depth costs
twice as much rather than four times. Keying on the accumulated text
fails both. The original case keeps its real assertion, that a request
this size is refused.
* fix: keep the recorded entry owner current, and the trash guard on the retry
A move into someone else's tree re-owns the whole subtree, which the
migration comment claimed could not happen. The shares on it are
re-pointed at the new owner, or they drop out of the listing the column
keys and stay in the old owner's.
The unique-violation retry re-entered the collision resolver without the
trash flag, which is the one call site the guard was not threaded
through.
The suite was CPU-bound on one runner, and about half of that CPU went to
re-importing the backend for every test file.
- Run the suite as 4 shards and merge their blob reports for coverage.
`test (pr)` stays as the required check and fails if any shard fails.
- Drop the per-PR base leg; pushes to main publish the coverage PRs
compare against.
- Files that boot a server without module mocks or extensions run in a
`shared-worker` vitest project (`isolate: false`), so the backend is
imported once per worker. testSharedWorkerSetup.ts resets the redis
mock, configContainer and extensionStore between files.
* auth: per-account 2FA code limit, single-use otp-login tokens, recovery mail limits
- /login/otp and /login/recovery-code share a per-account bucket charged on
wrong codes; an otp-login token completes one sign-in.
- /send-pass-recovery-email adds an IP bucket, a per-account cap and captcha,
and reuses the outstanding recovery token instead of rotating it.
- Reauth tokens carry the rejection reason; /signup re-attaches a temp
account only from an expired session.
* auth: app-issued access tokens older than their app stop authenticating
An access token whose row or parent session predates the app now holding its
uid is refused, the same check app and worker sessions already get.
* teams: signup can take an address a seat never confirmed
Password signup, save-account and a provider-verified OIDC sign-up take an
address a team seat holds unconfirmed; the seat's copy is cleared at the
write. A seat address that was confirmed still blocks.
* dev-center: encode dropped directory child names
* fix(events): bill reached deliveries only, bound dispatch reads, seal cursors
- A broadcast socket copy is billed only when a connection for its holder
exists on this node, anywhere in this region (connection count) or, for a
durable row, in a region presence names. Without peers it bills as before.
- Compiled match filters are held in a bounded LRU with a TTL, and dropped
when another process reports a subscription ended.
- GET /events/fetch reads the continuation from `cursor`, falling back to
`after`.
- Cursors from /events/fetch, /events/subscriptions and /events/kv-handles
are encrypted with sealCursor/openCursor; plain cursors still read.
- A durable subscribe counts again after its insert and removes its own row
when over the cap; the generation bump for that removal is published.
- Subscribe checks access before reading the anchor's owner, and an anchor
gone in between answers with the subject the caller sent.
- Dispatch reads at most the rows per token routing can use, scanning large
token hashes; a removal still settles every row on the removed anchor.
- puter.events.unsubscribe() stops routing after the server ends the
subscription or reports it gone; fetch() accepts `cursor`.
* fix(events): forward kv values only to regions with rows that ask
- A region counts its session rows asking for kv values per token and
announces the token's value variant (`v#<token>`) over the existing
`watch` item on the first such row, withdrawing it with the last. Add,
remove, reap, reanchor and refresh all keep it, reading `includeValue` off
the row as it is dropped.
- A kv write reads the value variants alongside the watch index and attaches
the value only to forwards bound for a region that announced one.
* fix(pagination): seal id-keyed cursors on every list endpoint
Apps, subdomains, workers, team (members, directory, teams, audit, own
audit), shares (inbound, outbound), the user-to-user permission audit and
readdir/descendant listings now hand out cursors sealed with sealCursor and
read them with openCursor, so a cursor no longer carries a row id. Plain
cursors issued before still read.
* test(events): pass socket ids to noteConnect in the billing tests
* fix(puter-js): free one-shot callbacks and listeners, guard message handlers
- setAuthToken starts the GUI cache refresh loop once instead of per call
- IPC reply callbacks are dropped after their reply; dehydrated callbacks stay
- AppConnection removes its window listener when the target app closes
- reply branches for app data and instance count drop their callback
- UI, Debug, tool and GUI-token message listeners no longer reject; an
unknown or failing tool answers toolResponse with an error
- parseResponse handles a blob response with no content-type
- retry waits remove their abort listener when the wait ends
- EmailConfirmationDialog escapes its message
- EventListener uses a real Map and snapshots listeners per emit
- Context get/set/runWithContext route every known key the same way
* fix(puter-js): time out requests that make no progress
- buildXhr starts an idle clock on send, reset by state changes and body
progress (upload progress only on requests already carrying a bearer)
- read-safe requests get 60 s while progress is observable, everything
else 15 min; timeout: 0 on fetchUrl/driverCall/sendWithRetry turns it off
- a timed-out read replays once; writes and AI calls never replay
- timeouts reject with code request_timeout on fetchUrl (TypeError),
driverCall, streams and the legacy XHR path
- document the limits in rate-limits-and-quotas and the chat stream note
* fix: only sign-in and picker popups hand the opener a token
Popup actions are an allowlist now: sign-in popups (no action, sign-in,
login, signup) deliver at boot, pickers deliver with the pick, and
request-permission keeps its exchange. Any other action runs no exchange
and posts no token. The consent check in postAuthActions applies to every
action that delivers at boot instead of only no-action and sign-in.
* fix: a dismissed account picker hands the opener no token
* fix(events): keep each region's presence item written only by that region
- A region that receives a forward for a pair it holds no socket for
retires its own presence item through the pin-ordered leave path,
gated by a region-shared claim. The sender no longer retires another
region's item, and the forward reply no longer carries noSocket.
- Presence reads skip items for regions outside the peer list instead
of retiring them.
- removeConnection decrements and deletes the count in one script.
- A failed join releases the join pin, and any connect that finds the
pin free writes the join.
- A single delivery treats a socket on any node of the region as local,
using the region-wide connection count, and picks the next remote
candidate by the regions already tried instead of by index.
- Correct the connection-count TTL comment.
* fix(events): count presence by live socket and honor the leave window region-wide
- A region's presence for a pair is a sorted set of socket ids scored by
last renewal under a new key, replacing the integer count. A socket
counts while renewed within the concurrency-slot window; add, renew and
remove each prune lapsed members and report the live count in one
script, so a node that dies stops holding the pair.
- The last socket going marks the pair as leaving region-wide for the
grace window, in the same script; a connect clears it. A forward that
lands on another node inside the window does not retire the item.
- Add the events.presence.write counter, labelled by op (join, leave,
refresh, retire).
* fix(events): resolve relative fs: paths like fs operations do
* docs(events): use bare relative paths in examples, test both relative forms
* docs(events): clarify that relative fs: subjects come back resolved
---------
Co-authored-by: Daniel Salazar <[email protected]>
* fix: a picker popup hands its opener a token once the user has picked
A picker opens because the site asked, not because the user agreed to
anything, so the hand-off now waits for the answer the popup was opened
to get. The exchange still runs at boot — the app row and host_app_uid
are what the dialog is opened against — but the token travels with
fileOpenPicked, directoryPicked or fileSaved. Cancelling sends nothing.
deliversTokenAtBoot is the one gate every boot-time hand-off reads, so
the plain exchange, the cross-origin-isolated /login/set path, temp-user
creation and manual signup all follow the same rule. A failed exchange
still reports and closes, having nothing to defer.
* fix: the review's findings on the picker hand-off
Double-clicking a file answers the opener from openItem.js, not from the
UIWindow button, so that pick returned the item and no token. The
deliverer is a global now and every path that answers an opener calls
it: both UIWindow handlers, openItem, and the save flow.
A failed exchange posted `{success: false, token: null}`, and the SDK's
handler sets that as readily as a real token, so a picker that failed
wiped whatever the site already held. The failure now goes only where a
boot-time token would have.
* fix: settle the url file-access gate from a grant held on a folder above
The gate asks `/auth/check-permissions` with `app_uid`, which resolved
through the permission scan. `fs:` access inherits down a tree and only
ACL walks that, so a grant on a folder never answered for a file inside
it and the gate asked again, writing another per-file row on each Allow.
The `app_uid` branch now routes `fs:<uid>:<mode>` through
`ACLService.check` as the app-under-user actor, which is the same
authority the operation itself will face. Everything else keeps the
scan, including `puter.perms.holds`, which sends no `app_uid`.
* fix: the review's findings on the consent gate
A permission that is not a string reached `startsWith` and faulted the
whole request, where it used to answer false inside the catch; both
parsers now refuse a non-string, which also covers the other callers
that read a request's list.
The path spelling of a permission took the scan while the uid spelling
took ACL, so one file could answer two ways. Both spellings resolve to
their entry and take the same route.
The checks run together rather than one after another: the caller gives
up after five seconds and prompts, and a deep path is several reads.
* fix: pin the token sender, scope the grant flag, and stop two stragglers
Five of the SDK auth-plumbing items.
**The global `puter.token` handler pinned origin but not source.** Its three
siblings all pin both, and each says why: the GUI origin is shared by every
frame on that domain, so origin alone identifies a domain, not a sender.
`signIn` pins its popup and binds `msg_id`, the consent dialog pins its popup,
and the reauth wait pins the embedder. This one pinned the embedder only when
`env === 'app'`. Since `authenticateWithPuter` now hands off to `signIn`, which
adopts the token itself, the embedder is the only sender this handler is left
serving, so it pins in every environment.
**`is_grant_user_app_permission` was a request-wide flag held across an await.**
It tells the `app-root-dir` rewriter that a row is being written, and while it
is set that rewriter resolves to a real `fs:` permission instead of
`PERMISSION_FOR_NOTHING_IN_PARTICULAR`. Anything evaluating an `app-root-dir:`
permission beside the grant -- the grant route runs one under `Promise.all`
with fs work -- read the same flag. It now lives in a scope derived for that
call, so what the write needs to say about itself is not also said to its
neighbours. `runInDerivedContext` is new: `runWithContext` starts an empty
store, which would drop the `actor` the rewriter reads.
**`fs.stat` and `fs.readdir` deduped on parameters alone**, so two identities
in one realm could share a result. They now key on origin and token as
`os/user.js` does, which documents the reason.
**`signIn`'s relay poll never stopped.** Closing the popup settles the promise;
the loop kept asking `/login/wait` every second for the life of the page.
**`triggerReauth`'s five-minute timeout was never cleared**, so a successful
reauth left a timer to fire into a settled promise.
The concurrency test parks the rewrite and reads the flag while it is held --
my first attempt read before the flag was even set and passed either way.
* fix: scope the fs cache per identity, and retarget two paths that never ran
The remaining SDK auth-plumbing items.
**`puter._cache` outlived the identity that filled it.** `_clearAuthToken`
dropped the token and the stored session but left the cache and `whoami` as
they were, and its keys were raw paths -- `item:/alice/Documents` and a
`~`-relative key alike, identical whoever asked. A GUI user switch without a
reload could be served the previous user's stat or readdir. Keys now carry the
origin and token they were read as, built in one place so the writers, the
readers, the invalidations and the warm-up probes cannot drift apart, and
signing out drops the cache and `whoami` with the token.
**The driver permission prompt could not fire.** Both paths waited for a 200
carrying `{success:false, error:{code:'permission_denied'}}`. The driver route
answers `success: true` or throws, so a refusal arrives as a 403 -- the shape
the retry now reads. Its two tests synthesised the old envelope, so they passed
against a response the API does not send; they use the real one now, and the
prompt goes from never called to called once.
This is a behaviour change: a driver call refused for permissions will now
prompt, which is what the path was written to do. Happy to delete it instead if
the prompt is not wanted.
The half-written copy of the same idea in `utils.js` is gone -- it prompted for
one hard-coded interface and its retry was a `// todo`.
**The verification-gate single-flight was keyed on nothing**, so a phone-gated
request in flight beside an email-gated one took the email answer, replayed,
failed again and surfaced raw without ever asking. Keyed per gate: same gate
still shares one dialog, a different gate gets its own.
* test: ask the cache the same way the code does
The API suites built `item:<path>` keys by hand, so they stopped finding
anything once the real keys carried the identity they were read as. They go
through `fsCacheKey` now, which is the point: a test that spells the key itself
passes until the moment the spelling changes, and then fails for a reason that
has nothing to do with the behaviour it is guarding.
These run against a live server, so a plain `vitest run` does not reach them --
they were green locally and red in CI.
* fix: the review's findings on this branch
Eight, and three of them were regressions this branch introduced.
**Pinning the token sender to `globalThis.parent` in every environment broke
the case it was meant to protect.** On a top-level page `parent` is the page
itself, and the token arrives from a popup, so the handler stopped accepting
anything. The GUI posts `puter.token` to `window.opener` for the file pickers
too, not only for sign-in, and this handler is their only consumer -- a site
calling `showOpenFilePicker()` would have signed the user in, dropped the token
and run the following read with none. It now pins the embedder when framed and
a window this SDK opened when not; `UI.js` already tracked its picker popups
for the same reason, so that set is shared rather than duplicated.
**The GUI still spelled a cache key by hand.** `updateSubdomainsForItems` built
`item:<path>`, which no longer matches what the SDK writes, so its `get` could
not hit and its `set` wrote an orphan nothing reads and nothing evicts -- a
published website's badge quietly stopped appearing on a cached render. It goes
through `fsCacheKey` now, and that is the last hand-spelled key in the tree.
**Retargeting the driver permission prompt to 403 was wrong and is reverted to
the deletion the ticket asked for.** The route refuses with `forbidden`, not
`permission_denied`, so the retarget still missed it; meanwhile a driver that
raises `permission_denied` for its own reasons would have opened a prompt that
had nothing to do with the refusal. And the prompt asks for
`driver:<iface>:<method>` while the route checks `service:<driver>:ii:<iface>`,
so granting it changes nothing. The path cannot work as written.
The rest were pre-existing or latent:
`cacheWhoami_` wrote its answer without checking the token it was issued under
was still current, so a reauth landing mid-flight could repopulate `whoami`
with the previous identity. `_dropIdentityCaches` also left `whoamiCache_`,
which other call sites await.
`setAuthToken` now drops the identity caches when the token actually changes:
keys carry the token and the store is persisted with no TTL, so a rotation that
did not go through `_clearAuthToken` orphaned a whole key space with nothing to
reclaim it.
The verification-gate entry was registered after the body could already have
deleted it -- a synchronous throw stranded a resolved "not verified" in the map
for the life of the page. It registers first and clears on a microtask.
`signIn`'s poll is bounded as well as settle-checked: on a cross-origin
isolated page opened from a gesture, nothing watches the popup, so closing it
never settled the promise and the loop ran on exactly as before.
`runInDerivedContext` says in its docblock that callee writes do not survive;
only the one flag needs the scope, and a future caller should not expect to
hand a value back through it.
* fix: the review's findings on the SDK auth plumbing
**The relay bound stopped asking without saying so.** The deadline left the
`signIn` promise pending and its listener attached. On an isolated page opened
from a gesture the relay is the only thing that can settle it -- nothing watches
the popup there -- so a user who took longer than the deadline was left with a
promise that never resolved, and `authenticateWithPuter` queues every later
implicit-auth call behind it. It rejects now.
**Pinning the token source left `signIn`'s own popup untracked.** Only the
picker popups registered, so on a top-level page the global handler bailed on a
sign-in it had opened itself: `puter.onAuth` never fired, and
`puterAuthState.authGranted` was never set. `openAuthPopup` is the one place
auth popups are opened, so they register there.
**A closed popup is ours too.** Rejecting one that had already closed loses a
message from a popup that posts and then closes itself, which is why `UI.js`
tolerates the same case. Kept, with the set bounded instead.
**The gate key carried the factors**, so one route naming them and another not
opened two dialogs for the same gate. It keys on the gate, as `ctx.done` does.
**`fsCacheKey` left `~` unresolved**, so a writer and an invalidation spelling
the same place differently missed each other -- the drift the one key builder
was meant to end.
The dead `opts.permission` went with the path that used to read it.
Four workerd-runner failures are left: `ai > chat stream adapter supports
cancellation`, `kv > a GUI boot key written by another client reads fresh` and
two cache-warmer ones. All four fail the same way on `origin/main`, and the node
and browser runners pass.
* chore: one-line the comments added here
* chore: reflow the comments the removed retry cause left ragged
The 2FA spinner showed "verifying", the files selection bar showed a
"done" button, and two login and signup errors showed their key names,
because i18n() returns the key itself when en.js has no entry for it.
The login error now uses the existing login_email_username_required key,
which already has translations. A test checks that every literal i18n()
key in the GUI exists in en.js.
The in-flight claim's lease (2x the invoke timeout) is also a future score, so
polling heldForMs > 0 could pass before the failed attempt's hold was written:
the backoff test read 600 instead of 2000, and the 404/hang/429/suspended-owner
tests ended while their attempt was still in flight, letting it land in the
next test. Wait on the subscription's failure counter instead, which only moves
after the hold or gap marker is written.
Durable subscribe, list, fetch and unsubscribe now apply the same scoped
token check as the handler, worker and kv-handle routes:
`isAccessTokenActor(actor) && !isAccountContext(actor)`. An access token
an app issued (effectiveApp = the app) is treated the same as one the
account issued: subscribe answers 403 `events_durable_requires_account`,
list and fetch return an empty page, unsubscribe answers 404.
`rowInActorScope` returns false for these tokens, which covers durable
unsubscribe and ack. The session verbs that also use it already refuse
access tokens at the socket handshake.
Full-access tokens, app tokens and sessions are unchanged.
The duplicate-username check in the signup placeholder claim, change-username
and save-account runs before the user-row write, so a concurrent write can
take the name in between and the unique index rejects ours. Each path now
re-reads the holder from the primary on a unique violation and returns the
400 its pre-check returns for a taken name, instead of a 500. In all three,
the home-directory rename, rename budget charge and username-changed event
run after the user-row write, so nothing has happened yet when it fails.
The boot-key batch now starts only when puter.env is 'gui'. In every other
environment a get() of one of those names reads that key on its own, like
any other key, instead of fetching all 14 and serving them for 4 s.
- signup: a username taken by a concurrent signup between the duplicate
check and the insert now returns the pre-check's 400 instead of
surfacing the unique-key error as a 500. The holder is read from the
primary.
- fs move: when the UPDATE trips the (parent_id, name) unique key after
the collision probe missed the occupant, re-read it from the primary and
resolve it the same way the probe would have (overwrite, dedupe, or the
409 item_with_same_name_exists), then retry the move once.
- server health: a check that hits the per-check timeout reports how long
the event loop was blocked during it, like the database-liveness latency
failure already does.
- flush follows LastEvaluatedKey until the namespace is empty and rejects
when a batch delete fails; cached reads for every key a page returned are
still invalidated and the flushed event still fires.
- decr validates the amount map before negating it, so it accepts exactly
what incr accepts.
- del checks the key like every other store method (oversized key is a 400).
- list offset emulation treats a missing continuation key as end of data
instead of restarting from the first key.
- Array get maps results through a Map instead of a linear find per key.
- The driver gates includeTotal on credit like value listings.
- New driver caps in drivers/kv/limits.ts: 1,000 keys per array get, 1,000
items per batchPut (both rejected past the cap), list limit lowered to
1,000. Published in rate-limits-and-quotas.md and the set/list pages.
- puter.kv.list() no longer throws synchronously for invalid options; it
returns a rejected promise, or for stream: true an iterator whose first
next() rejects. Error codes unchanged.
- Writes through puter.kv (set, del, incr, decr, add, remove, update,
expire, expireAt, flush) stop the boot-key batch from serving the keys
they touch, so the next get() reads the store. Untouched boot keys are
still served from the batch.
- Client-side key/value size checks measure UTF-8 bytes, and values are
measured as their JSON encoding, matching the store. Same codes and
messages.
- stat: only path-addressed results are cached; uid-addressed stats no
longer share one cache key.
- readdir: overloads declare the page result for recursive + limit/offset
and for the positional page/stream forms.
- move: only a not-found destination lookup means "new path"; other
lookup failures reject. A uid destination skips the lookup.
- getAbsolutePathForApp always resolves paths. read/copy/move/delete use
getAbsolutePathOrUidForApp, which keeps sending UID-shaped strings as uids.
- Docs for read, copy, move, delete and readdir.
Two findings from review, both of which contradict what the last commit
claimed.
**The backfill could merge keys, not only split them.** I asserted it "can only
split rows apart, so it cannot collide". Not true, and reproducible: a row
predating the `clean_email` column has a NULL there, so its index key is
`lower(email)` -- filling it in folds `+tag`, and `[email protected]` lands on a
key `[email protected]` already owns. A legacy row holding an un-lowercased
`clean_email` collides the same way once lowercased. Either throws, and the two
engines that re-run every file on every boot would then refuse to start until
someone operated on the database by hand.
Both updates now fire only where the stored value is exactly what the old rule
produced and differs from the correct one. That makes "splits only" true: the
sole change is dots coming back. NULLs and legacy values are left alone.
The same predicate makes them write-idempotent. Postgres has no no-op-update
suppression, so without it every boot rewrote a tuple per Apple row forever.
**The pending-invite residue misdelivers rather than just going missing.**
`claimPendingShares` looks the row up by the canonical address, so whoever
confirms `[email protected]` claims the invites addressed to
`[email protected]` -- someone else's file, handed over on confirmation. I had
written this off in the PR as unfindable invites that "expire on their own";
`share` has no expiry column and the lookup has no time predicate, so they are
claimable indefinitely.
Fixed here rather than later: the typed address is kept as `invitedAddress`
whenever it differed from the canonical, which is exactly the collapsed rows,
so the invites recompute from it under the same guard.
Verified by seeding a database at the old version with the two rows that used
to abort the migration, and booting: it reaches version 87, repairs the
collapsed row, and leaves the NULL and legacy rows untouched. Replaying the
statements changes zero rows.
The sqlite migration list is hand-maintained, so the file alone did nothing —
a fresh boot still reported 87 files and stopped at version 86. MySQL and
Postgres read their directories, so only this one needed the entry.
Caught by booting a local instance rather than by the suite: the client tests
pin `CURRENT_SCHEMA_VERSION`, which fails once the entry exists but says
nothing while the file is simply unregistered.
Verified against a seeded database at the old version. `[email protected]`
went from `[email protected]` to `[email protected]`, `[email protected]`
from `[email protected]` to `[email protected]` — subaddressing still folded — and a gmail row
was left alone.
`cleanEmail()` applied gmail's `dots_dont_matter` rule to icloud.com, me.com
and mac.com. Apple allocates the exact string: `[email protected]` and
`[email protected]` are two mailboxes with two owners. Collapsing them made one
canonical address stand for both.
What that canonical address feeds:
- `findEmailOwner` falls back to it, so an OIDC sign-in whose verified claim is
the dotted address resolves to the account holding the undotted one, and
`linkProviderToUser` has nothing left to object to -- the provider verified a
real mailbox and the account's address is confirmed.
- The unique index on COALESCE(clean_email, lower(email)) reads it, so the
rightful owner of a dotted Apple address is refused signup because the
undotted account already "owns" it.
- Pending share invites are stored and claimed on it.
Subaddressing is untouched: Apple does fold `+tag`, so that rule stays. Gmail
keeps both rules -- there the fold is correct.
A migration recomputes `clean_email` for those domains on all three engines,
since rows written before this still hold the collapsed value and the index
reads the stored one. Verified the SQL against the function rather than by
inspection: same five inputs through `cleanEmail()` and through sqlite give
byte-identical output. It can only split rows apart, never merge them, so it
cannot collide with the unique index.
Not changed: `findUserByEmail` still matches on the canonical address. The
cross-match it documents is correct where the provider really does fold --
`[email protected]` is the same inbox as `[email protected]`. Requiring an
exact match would break that for no benefit here; the fix is for the data to
say what the provider does.
The in-flight claim's lease (2x the invoke timeout) is also a future score,
so polling for "held" could read it before the failed attempt's backoff
hold was written. Wait for deferAfterFailure to settle instead.
- Chat driver runs each attempt through one helper and checks the abort
signal only on entry and in the attempt catch blocks, where it keeps a
cancelled request from marking the route unhealthy.
- A stream ended after cancellation still emits ai.prompt.cost-calculated;
only ai.prompt.complete is skipped.
- pipeNdjsonStream owns its line buffer and onEnd is optional; drop the
errored guards that can no longer fire.
- Drop the Claude post-loop abort check (finalMessage already throws).
- Skip provider error logs when the caller cancelled.
- Simplify the usage_limited cap condition.
Local testing against a running instance found the service-side fix was not
enough. Both answers were 403, but they did not read the same:
exists -> permission_denied: fs:/other/rd:read
missing -> Cannot create outside your home directory (forbidden)
The second comes from `#planFsPathCreate` in the controller, which probes the
path itself and only calls the create guard once it knows the path is absent.
Its comment said so outright -- checked "only once the path is confirmed
missing, so an existing shared path outside the caller's home is not a new
rejection" -- which is the oracle stated as an intention.
A foreign path now refuses word for word whichever it is. Responses are
byte-identical apart from the caller's own input.
`rewritePermissionForActor` collapses the create guard's `forbidden` the same
way it already collapsed the 404, for the paths that reach it through the
service rather than the controller.
The existing test pinned `forbidden` here; its subject is that nothing is
created in someone else's tree, which still holds. Alongside it is the
invariant itself: refuse a present and an absent foreign path, mask the path,
compare the whole error. Without the controller check that fails.
**The path oracle was not closed.** The rewrite only remapped the *error*, so
success-vs-403 still answered whether a foreign path exists. Narrower than
reported: every other grant path already gates on `canManagePermission`, and
only `grantUserAppPermission` has no authority check -- deliberately, since
granting your own app something you don't hold is inert. It now refuses a
foreign path the actor cannot see, with the same error a missing one gives.
My first test for this passed without the fix: `makeUserActor` creates no
fsentries, so both paths 404'd and nothing distinguished them. It inserts a
real entry now, and the control fails with "expected null to match 403" --
null being the grant that succeeded, which is the oracle.
**`#validateEmail` still failed open** on the main signup / change-email /
confirm path while its OIDC twin was hardened. Same shape as OIDC now: a gate
that did not run is not a pass.
**The 16-permission cap broke `puter.perms.check()`** for longer lists. The
SDK's own docblock promised "one round trip however many are asked about",
which the cap made untrue, so it batches instead. The reported second half --
the UI grant poller burning its timeout -- is not reachable:
`MAX_REQUESTED_PERMISSIONS` already caps that path at the same 16.
**`listener_failed` was set by wildcard listeners.** An unrelated observer on
`email.*` throwing would refuse every signup. Only an exact-key listener
implements the event, so only that one speaks for the gate.
**`whoami()` labelled everything `Unauthorized`.** A 502 with an HTML body is
not a 401; the server's `code` now rides along and the fallback names the
status.
Switching `getSubtreeSize` to `entry.userId` fixed a recipient reading 0 for a
shared folder, but `/stat` is gated on `see` and `return_size` is caller-
supplied. `see` is the weakest level -- the folder is visible, what is under it
is not -- so the sum now covered entries the caller had no way to enumerate.
It is answered only for a caller who passes a `list` check, which is where the
contents become enumerable anyway. Everyone below that gets the directory row's
own size, which is what they got before this branch.
`#assertAccess` grew a non-throwing sibling for this; the descriptor both need
moves into `#aclDescriptor`.
Test grants `see`, asserts 0, grants `list`, asserts the real size. Without the
gate the `see` case reads the file's bytes.
Measured first, against a real server, counting DB round trips: a 40-seat
delete was 284 queries, 7.1 per seat, scaling linearly. Four of those seven
answered for the whole page and had no reason to be asked per account.
120x SELECT * FROM `user` WHERE `id` = ?
41x INSERT INTO `audit_team_membership`
40x SELECT COALESCE(SUM(size), 0) FROM fsentries
40x UPDATE `user` SET `suspended` = ?
40x SELECT `uuid` FROM `sessions` WHERE `user_id` = ?
The page now reads who is already suspended, what each holds, and the rows the
notices need in one query each, and writes the audit as one statement. What is
genuinely per account -- the suspension, its billing event, the mail -- stays
per account under the same concurrency bound.
Same 40-seat delete is now 170 queries, 4.3 per seat.
Three new store methods rather than raw SQL at the call site:
`getSuspendedByIds` reads the primary, deliberately not `getByIds`, which is
cache-first. A stale `suspended` is exactly what re-charges a seat on a retry,
which is the thing this path was just fixed to stop doing.
`getHeldBytesForUsers` is `getHeldBytes` with a GROUP BY.
`appendAuditMany` is `appendAudit` as one multi-row insert, still written
before any suspension, so a failed append cannot leave an unlogged one.
What is left is concentrated in `#suspend`: the UPDATE, the forced re-read the
user store does afterwards to refresh its cache, and the session drop. Those
are shared store paths and batching them means owning their cache invalidation,
so they are not in scope here.
Four, all real.
The gate threw on a non-string. `validator.isEmail` asserts its argument, and
two call sites hand it an unvalidated body value -- `send-pass-recovery-email`
is public, so `{"email": 1}` was a 500 rather than a 400. The check belongs in
the gate, not in each caller, which is the whole premise of having one.
OIDC signup never shape-checked the claim at all. `claims.email` went from a
truthiness check straight into `user.create`, so a provider we do not run could
store exactly the string this branch exists to keep out. `email_verified`
attests the mailbox, not the characters.
The change-email confirm handler promoted the staged column without re-reading
it through anything. A row staged before this deploys still lands on `email`;
one check at promotion closes that window.
The invite path kept its own regex, and it was never the same rule. It admitted
`[email protected]`, `.[email protected]`, `[email protected]`, `a;[email protected]` and `a,[email protected]` -- the last of
which nodemailer reads as two recipients -- each one a permanent pending row
that spent daily quota, which is the failure the comment above the constant
said it existed to prevent. It uses the gate now, and the second regex is gone.
A regression test each, all four confirmed to fail without their fix.
`validator.isEmail` accepts a quoted local part, so an address whose local part
is an arbitrary string passes it. Five call sites relied on that check alone
before writing the address to `user.email`, and the invite path's own shape
regex was equally permissive.
`isStorableEmail` is now the single gate: the library check, plus a refusal of
`<`, `>` and `"`, which are legal in an address only inside the quoted form.
Nothing deliverable uses that form, so the rule costs no real address --
apostrophes and ampersands in a local part still pass, and the suite covers
them.
One function rather than a check each caller has to remember, because the next
place that stores an address will not remember.
Six findings, all real.
`total` described rows the page withheld. The count ran over every live team the
user belongs to, while the app-actor filter ran afterwards on the items only, so
`GET /teams?includeTotal=true` from an app returned `items: []` with a non-zero
`total` -- the exact thing the filter exists to prevent, and newly reachable
because `includeTotal` was inert before this branch. The directory-open
restriction moves into the query, so items, cursor and total all describe the
same set.
The GUI told owners the opposite of what the server now does: "we email the
username and temporary password to it." An owner who believed it would dismiss
the one copy of the password and strand the seat. Rewritten.
`runWithConcurrencyLimit` rejects on the first error but cannot cancel the
workers beside it, so a failed seat let up to seven others finish suspending and
emailing "your team has been closed" for a team that was still live. The page
now settles before the rejection is rethrown, which leaves a state the retry can
resume from instead of an arbitrary one. My earlier claim that failure
semantics were unchanged was wrong.
`#disableSeatForDelete` returned `true` on both paths, so the boolean read as if
it distinguished them. It returns nothing; the counter uses the settled results.
`listTeamsForUser` had picked up a second stacked docblock -- the same defect
this branch removes from `#cached` one file over.
`reissueCredential` sent the provisioning mail, which after the credential
change was a byte-identical duplicate saying nothing about the password it had
just invalidated, while the GUI promises the member hears about it. It has its
own template now.
Regression tests for the count leak and the reissue notice; both confirmed to
fail without their fix.
Both docblocks on the directory route said it carries nothing a colleague
cannot already read through `/members`. It carries `uuid`, and `/members`
withholds `uuid` from everyone but the owner, with its own comment pointing
apps at the directory to get one.
The disclosure itself is the opt-in working as designed: `directory_enabled` is
the owner's consent to expose a roster, every member reaches the route the same
way whether they call it from a session or through an app, and the SDK and the
teams recipes already document the directory as where a stable id comes from.
So the comments are what was wrong, not the route.
Removing `uuid` from the directory would be the other way to make them agree,
but it breaks `listDirectory()` for every caller and contradicts the published
recipes; that wants a decision, not a cleanup commit.
`#resolveRecipient` already refuses to treat an unconfirmed address as an
identity, and says why: "resolving it would hand the share to whoever registered
the address first." `#invite` then looked the same address up again and honoured
whatever that row said about blocking -- `blocksAllShares`, or a block on this
particular sender.
So registering an address you do not own, and never confirming it, was enough to
refuse every invite anyone sends to that mailbox. Nothing about that row is
evidence the mailbox is yours, which is the premise resolution already works
from. A team seat reaches this cheaply: those accounts are provisioned with
`requires_email_confirmation: false` and an address the owner typed.
The block is now honoured only for a row that confirmed the address. The alias
reasoning behind the lookup is unchanged -- a confirmed holder still cannot be
reached through a variant they did not type.
Not addressed here: the same unconfirmed seat still holds the address against
the real owner's signup, because `idx_user_owned_email` keys on having a
password rather than on confirmation. Narrowing that is a schema change and
wants its own ticket.
Provisioning a seat lets the owner supply any `email` that passes a format
check. Puter then mailed a working temporary password to it. Nothing confirms
the owner controls that address -- provisioned accounts are created with
`requires_email_confirmation: false`, because the team is the trust anchor for
the account, not for the mailbox. `resendActivation` reissues the credential and
mails it again, up to the 20/day `team:reset-password` budget, so the same
address can be hit repeatedly.
The credential now stays out of the mail on both paths, which is what
`resetMemberPassword` in the same file already does. Nothing is lost: all three
routes return `temporary_password` to the owner, and the SDK has always
documented that as the delivery -- "The returned password is shown once and is
not retrievable afterwards -- deliver it out of band." The mail still goes out,
naming the account and saying the team will supply the password.
The two tests that pinned the old shape are inverted rather than deleted; one of
them carried the rationale "without it this is the only copy", which the return
value contradicts.
`deleteTeam` tore seats down one at a time, each one awaiting a mail send, so a
full 40-seat team was 40 round trips end to end inside a single request. The
per-seat work is independent, so it now runs under the same bounded-concurrency
helper the rest of the backend uses for fan-out sends.
The loop also had no equivalent of the guard `disableMember` carries. That one
checks `suspended` before emitting, with the reason written down: a second
`team.account.disabled` opens a second byte charge that only one `enabled` will
ever close. Deleting a team emitted unconditionally, so any partial failure
followed by a retry double-charged every seat the first attempt had already
disabled. The seat teardown moves into one method both paths can state the same
way, and a retry now resumes instead of re-charging.
Failure semantics are unchanged: a seat that throws still aborts the delete and
leaves the team live, which is what makes the retry meaningful.
Touching this file reformats a few untouched spans -- it carried ten
pre-existing `prettier/prettier` errors that the repo's own pre-commit `eslint
--fix` resolves on any commit that stages it.
The cache docblock claimed `isMember` and `getByUid` were left uncached "for
that reason". Both go through it -- `getByUid` directly, `isMember` through
`getMembership` -- so the comment told a reader the opposite of the code, on the
two reads that decide authorization.
What makes it safe is the busting, not an exemption: every mutation here drops
the keys it touches, and the TTL is the backstop for the one path that does not
come through this store, the ON DELETE CASCADE on the membership row. No stale
window is constructible today; the comment now says why.
Also drops a one-line docblock stranded above it, describing a method that is no
longer in the file.
`listTeamsForUser` returned every row and the controller never read `req.query`,
so `limit`, `cursor` and `includeTotal` were accepted and ignored on the one
team route that did not paginate. The docs promise a capped page there, and
every sibling listing already honours it.
Keyset-paginated on `id` per doc/pagination.md, with the envelope the other
routes return. The app-actor directory filter still runs over the page, so an
app sees the same teams it saw before, just a page at a time.
Reads as the same enumeration surface `/query/app` refuses to be, so write down
that it is not: `/query/app` answers for apps the caller names, which is why it
must not confirm one it may not see. `select` is the listing a launcher reads,
and a listing that hid every app but your own would not be one. Protected apps
are still filtered by the permission check, and `user-can-edit` narrows it to
the caller's own.
A test already pins the behaviour by name; this is the reason behind it.
The collapse caught every `subject_does_not_exist` the rewriters raise, not just
the path resolver's. `app-root-dir:` 404s when the caller's own app has no
resolvable root directory, and that answer is theirs to have — four of its tests
said so.
Only a permission that parses as an `fs:` path can oracle someone else's tree,
so only that one collapses now.
`/auth/check-permissions` took an array of any length. `checkMany` batches the
scan so it is not the fan-out the report describes, but nothing stopped a caller
sending thousands of strings; it now takes the same 16 the grant and revoke
routes take.
`whoami()` returned `resp.json()` without looking at the status, so an expired
token resolved to an error body typed as a `User`. Callers read `username` off
it as undefined — which is how a consent prompt came to ask for
`/undefined/Documents`. It throws the documented `{ status, message }` shape
now, the same one the no-token path already threw.
Linking a provider identity already bound elsewhere answered 409 with the raw
provider subject and the other account's internal id in the message. The caller
needs to know there is a conflict, not whose it is; both stay in the log for
whoever is debugging it.
Status and legacy code are unchanged — OIDCService branches on the 409.
The signup paths read `allow` off a payload they initialise to `true`, so a
harness listener that throws leaves the verdict untouched and the signup goes
through. The outer try/catch the report points at is not where it happens:
`emitAndWait` already swallows each listener's error and carries on, so that
catch almost never fires and the throw never reaches it.
`emitAndWait` now records the failure on the metadata it was handed, and both
signup paths — OIDC and the ordinary one — refuse when it is set. Other emitters
are unaffected: the flag is only read where somebody is asking for a verdict.
The report named OIDC alone; the ordinary signup had the same hole, and it is
the path that matters more.
Test boots a server, registers a listener that throws, and posts a signup: 200
before, 403 now.
Two unrelated bugs in the same area.
`stat({ returnSize: true })` summed `fsentries` filtered on the *acting* user,
so a recipient asking for the size of a folder shared with them matched no rows
and read 0. The sum is over the owner's rows; the ACL check that let them stat
it is what decides whether they may ask at all.
`fs-access-levels` destructured the mode out of the permission but kept the
`.slice(1)` that used to skip it, so widening `fs:<id>:see:thumbnail` produced
`fs:<id>:read` and dropped the sub-scope. Anything granted below the mode stopped
being implied by a wider one. Latent — nothing ships a sub-scope today — and the
test fails without the fix.
`perms.request('appRootDir', { app: <someone else's> })` could never succeed —
only the app itself may claim its root dir — but the SDK read the refusal as
"not granted yet", prompted the user, took the grant, then polled until it gave
up and resolved undefined. A prompt the user cannot act on, and a live grant for
a directory the app will never reach.
The route now says which kind of refusal it is. `forbidden` alone could not
carry it: the SDK already treats that as the refusal a grant is about to lift,
and a unit test pins exactly that sequence, so a new `reason: 'app_mismatch'`
field rides alongside instead of changing the code clients read.
An entry refused that way is held back from the pooled grant and resolves
undefined without a prompt, which is what it resolved to before.
A share recipient addresses an entry as /<owner>/<uuid>/<name>, which is the
point of the mask: it says where the item is without naming the folders above
it. The 404 raised when a file's backing object has gone put `entry.path` in the
error fields, so reading or copying a shared file whose object had vanished
handed back the real path.
The fields carry the uuid alone now, on both the read and the copy site. The
caller already has it — it is what they named the entry by.
The existing ghost test asserted the path was present, so it is the regression
pin; the copy one was not checking fields at all and now does.
`fs:/path:mode` resolves through `getEntryByPath` with no ACL check, and a
missing entry answers 404 while an existing one carries on to the authorization
check and answers 403. The pair is a membership test for any path on the
deployment: grant routes take the permission as given, so anyone could ask
whether /someone-else/taxes.pdf is there.
The resolver keeps its 404 for a path inside the caller's own home, where
knowing it is missing is the useful answer and reveals nothing. Everywhere else
it answers with the same `permission_denied` the authorization check gives, so
the two cases are one case. ACLService already collapses them; this is the same
rule reaching the grant and revoke paths, which take an actor and so can tell
whose tree is being named.
Internal resolution still goes through `rewritePermission`: only the paths that
take a caller-supplied permission moved over.
The test grants on an existing foreign path and a missing one and asserts the
outcomes are identical; without the fix they are 403 and 404.
* docs: add the medium teams recipe
Built around what an app actually does with a team: an assignee picker
keyed on uuid, paging a large directory, scoping stored data per team,
sharing with everyone at once, and telling the three empty cases apart.
One playground example per section.
* docs: split the teams recipe into the two use cases it covered
The medium teams recipe carried six sections, which is the wrong shape for a
recipe: an agent reading llms.txt to answer "add team sharing" had to find it
inside a page called "Work With a Team", next to paging and team switching.
Two recipes, one use case each:
share-a-file-with-a-team the whole team, or one teammate via the directory
show-a-team-owner-panel gating an admin view on isOwner
Dropped rather than moved: paging and the empty/closed-directory cases, both
already in Add Team Support, and per-team data namespacing, which assumes
multiple teams we do not support yet.
Two corrections while rewriting. A team share names the team in `holder_team`;
`holder` is a username, so the old example printed the wrong field and told the
reader it meant "no one person". And `share()` takes a username for a person,
never a uuid — the picker now shares by username and keeps the uuid for what it
stores, which is what the rename advice was always about.
The old page also linked to /recipes/teams-read-membership/, which does not
exist; the slug is add-team-support.
* refine
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
Narrows the wire-shape changes to the callers that need them.
- request-level upstream 4xx stays strict only on the Anthropic route;
/drivers/call and the OpenAI routes fall back on any error again
- outage chains return 400 with the old codes; the Anthropic error
renderer maps them to 502/529 from the carried upstream status
- native Claude results report finish_reason 'stop' again (real reason
in stopReason); OpenAI routes still map the real value, and a stream
that carried tool calls never ends as a plain stop
- Claude usage carries thinking_tokens again, informational only and
added after pricing and the funds cap
- reasoning_effort is clamped to values each OpenAI model accepts;
Hoonify, MiniMax, ZAI and Meta only receive params they support
- OpenAI-form tool_choice from /drivers/call is normalized again
- /responses accepts background:false; mcp_servers is ignored; legacy
media block shapes pass the Anthropic route's validation
- OpenAI web search holds one call; only search actions are billed;
Azure bills Bing grounding requests; usd_cents includes search fees
* docs: medium kv recipes (PUT-1972)
Adds three recipes:
- Store a Set of Unique Values: an object as a set via update/remove,
quoted paths for values with dots, like button, recent searches
- Run Code Only Once: incr as an atomic claim, once per day, quotas,
sequential numbers, webhook dedupe in a worker
- Keep a Version History: incr version numbers, batch set with expireAt,
reverse list paging, restore, keep last N, delete by prefix
* docs: more medium kv recipes (PUT-1972)
Adds six recipes:
- Keep an Index in Sync: batch set for record + index keys, moving keys
on change, delete order, per-group counts vs includeTotal, search as
you type, rebuild and stale-entry cleanup
- Share Data Between Apps: appData scopes, appUuid on every call,
disableSharing private entries and the set-without-flag gotcha
- Save User Settings: defaults merge, nested paths, reset with remove,
form binding, sets inside settings, renaming a setting
- Split a Large Value Across Keys: size-based read/write cost, shards
numbered by incr, latest/older/all reads, expiring old shards
- Export or Delete Data: stream export, filtered batch import, delete by
prefix, delete before a date, flush
- Build a Shopping Cart: quoted SKUs, incr quantities, TTL via update,
hide-at-zero, server-side prices at checkout
Also adds a high score section to Add Counters, links Query a Collection
to the index recipe, and replaces its stale newest-first advice with
list({ reverse: true }).
* docs: simplify wording in medium kv recipes
Plainer prose throughout: shorter sentences, no bold or step-by-step
scaffolding, fewer defined terms. Code is unchanged apart from comments.
Fast mode has its own quota. Its 429 used to count as a route failure,
so the request was replayed on a reseller and the Claude route for that
model was marked unhealthy. The provider now retries once without speed.
The generic test covers the defect's shape; this one is the case the report
describes. `fs-access-levels` puts `manage:fs:<id>` in the higher set for
`fs:<id>:read`, so a delegate holding the manage terminates the issuer scan with
it as the leaf — which is how the old warm came to write a manage permission
under a holder granted nothing but read.
Without the fix the holder ends up with `manage:fs:<id>` in the flat view and
`canManagePermission` answers true for a read-only share, so they can re-share
the entry at any mode.
Two ways the flat KV view could say more than the SQL behind it.
On a miss the warm flattened the whole traversal and wrote every leaf under the
holder. Those leaves belong to the issuer: a holder granted one mode of a
resource by someone who holds the resource itself had the issuer's wider
permission written under their own key, and it answers later checks. The warm
now writes the holder's own row and nothing else, which is what the grant path
has always written.
Deleting an account cascaded the grants it issued out of SQL, but the flat
entries are keyed on the holder, so nothing removed them and they are trusted
without an issuer check. The access outlived the account, and the owner could no
longer see it to withdraw it. The refs are read before the row goes and cleared
after it, through the same batched delete a revoke uses, so peer regions hear
about it once.
Both fail without the fix: the warm test sees the issuer's wider permission
written under the holder, and the delete test reads the grant back from an
account that no longer exists.
* docs: add the medium fs recipe
readdir paging, streaming, sorting and recursion, plus the write and
mkdir options that decide what happens to an existing name. One
playground example per section.
* docs: ground the medium fs recipe and examples in the UI that lists
A file browser with infinite scroll and a count footer, a gallery sort
header, an upload endpoint deciding what to do with a repeated filename,
and a report generator writing into a folder tree that does not exist.
* refine
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
* docs: add the medium perms recipe
Batch requests behind one prompt, appData scopes, raw permission
strings with create, and the entries rejected before any dialog.
One playground example per section.
* docs: ground the medium perms recipe and examples in the screens that ask
A first-run setup, a settings page that renders its real state, a
companion widget reading another app's data, and an importer that wants
folders created on approval.
* refine
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
The Anthropic-compatible route flattened requests into the OpenAI-style
driver shape and rebuilt them for Claude, which dropped system blocks,
thinking, tool_choice, cache_control, betas and stop reasons. Claude
Code requests 400ed upstream and were silently served by a reseller.
- normalized driver args, stream chunks and results gain tool choice,
thinking, output format, stop sequences, caching, stop reasons, usage
details, reasoning signatures, server-tool blocks and safeguard results
- ClaudeProvider builds requests from those fields with a beta, tool and
body-field allowlist; meters fast mode, web search and advisor calls,
and no longer bills thinking tokens twice
- fallback only on route-level failures; outages map to 502/529
- vendor error envelopes on the Anthropic and OpenAI routes
- Anthropic route: native SSE with pings, count_tokens, /v1/models
- OpenAI-family providers and routes map the same fields; Responses web
search is metered; reasoning_effort gating fixed; /responses rejects
org-scoped stateful params and forces store:false
- puter.js: typedefs, new chat options, silent toString for new chunks
A client middleware inside the SDK retry loop logs every throttled attempt
(including ones that succeed on retry) with its operation, table, key,
client region and DynamoDB's throttling reason, plus batch items returned
unprocessed. Each target logs at most once a minute with a count of the
throttles folded into it. Puts log only the key attributes, using key
schemas registered by the KV store at startup.
* feat: let the account's own API token reach the routes it should
A privileged app is launched with the GUI session token today. Running one on a
full-access personal access token instead costs much less when it leaks, but
several routes those apps depend on refuse every access token, so the swap would
break them.
Admitted, each a read or a write the token's own HTTP reach already covers:
- the realtime socket handshake, which refused access tokens outright; FS
live updates and notifications stop without it
- GET /get-dev-profile and POST /profile, both puter.js surface
- GET /auth/list-permissions — a read of what was granted, not a grant
- GET /share/shared-by-me/apps and GET /share/audit, over grants
/share/shared-by-me already lists for the same credential
- POST /rao, which puter.js calls on every setAuthToken
Gated on `isAccountContext`, not the `full_access` claim alone, so a token with
an app anywhere in its chain is still refused and a socket for one never joins
the user room.
Left session-only: mint, session, 2FA, grant, team and billing, plus two the
list named. /share/blocks is a personal safety control whose only caller is the
desktop's Blocked Senders window. /app-feedback is reachable only from our own
GUI pages, and being unsubmittable programmatically on a user's behalf is the
property it was built with.
The new HTTP suite drives a real server with a minted token and fails on all six
admissions without the change; the block routes' existing metadata check already
pins their refusal.
* test: sort the two token shapes at the events handshake
* fix: carry the account-context invariant into the HTTP gate
`requireUserActorGate` admitted on the raw `full_access` claim while the socket
and /rao use `isAccountContext`, so one shape — a token carrying the claim with
an app in its chain, or an actor built without `makeActor` — would have been
refused in two places and admitted in the third. Unreachable today, since the
mint and the auth-time read both drop the claim when `app_uid` is present, but
it is the invariant this change states and it should hold at every enforcement
point.
The payout address goes back behind a plain session: `/get-dev-profile` is open
to the account's own token now, and the rest of what it answers is a developer's
own name and incentive-program status.
Also drops a cross-reference in EventsService to the socket posture this change
relaxed, and rewords the block-routes comment, which read as if access tokens
were admitted there rather than refused.
* fix: drop a revoked token's sockets, and read the dev-profile columns
Two gaps the review found, both reachable only because this branch lets the
account's own token hold a socket and call /get-dev-profile.
`#revokeAccessTokenTail` soft-revoked the session row and told no one, so a
revoked token kept its connection — and the account's `outer.gui.*` fan with it
— until the five-minute reauth sweep. Sockets now join a per-token room and a
new `auth.access-token.revoked` event drops exactly that room, so the account's
other tabs stay up. Session revoke keeps its account-wide eviction.
`/get-dev-profile` read `first_name`, `last_name`, `paypal` and the two
incentive flags off the user row, which carries none of them: the columns have
always been `dev_`-prefixed, so the endpoint answered nulls to everyone and
`puter.apps.getDeveloperProfile()` has never returned anything. Reads the real
columns, keeping the unprefixed name as a fallback for a deployment carrying
both. The payout address stays behind a plain session, so opening the route to
the account's token hands over a name and incentive status and nothing else.
Both fail without the fix: the socket test waits five seconds on a connection
that should already be gone, and the profile test reads back a seeded row.
* fix: close /open_item to tokens, and stop the node runner leaking sockets
`/open_item` carried `allowFullAccessToken`, but it grants an app a permission
on the user's behalf and mints the app token to go with it — a grant and a mint,
which stay session-only. Pre-existing, and missed by the first sweep here, which
only asked whether routes lacking the flag should gain it and never re-read the
ones that already had it. Refused at the top of the handler too, so a credential
that gets past the gate cannot leave an ACL row behind.
The node runner loads each SDK into a vm context and never closed it, so every
test leaked a socket, and every socket holds a per-(user, origin) connection
slot. Admitting the account's own token to the handshake pushed that past the
cap, and the whole events block failed with `events_connection_failed` while the
browser and workerd runners — which do not leak — passed. Closing the FS socket
and the events channel after each test gives the slots back.
* fix: announce only the revokes that can have a socket to drop
Every access-token revoke broadcast an eviction cluster-wide, including the
read-URL tokens `revokeReadUrl` retires constantly. A scoped token is refused at
the handshake, so none of those broadcasts could ever reach a connection.
The announcement now goes out only for a token the handshake would have
admitted: full access, no app in the chain. `revokeOwnAccessToken` refuses
full-access tokens outright, so that whole path is silent; a revoke by raw uuid
says nothing about the token and still announces, which costs a no-op broadcast
rather than leaving a revoked socket up.
Fails without it: the test revokes a scoped token and a full-access one through
the same entry point and counts the announcements.
* test: pin the mint route against the account's own token
`/auth/create-access-token` carries only `requireAuth`, so it never showed up
in the sweep over `requireUserActor` routes — the refusal lives in
`AuthService.createAccessToken`, which turns away any access-token actor
outright. That holds today, and a leaked full-access token minting itself a
sibling that survives revoking the original is exactly what the token swap is
meant to rule out, so it is worth a test rather than a reading.
* fix: let the recommended-apps test follow the list it tests
Two commits on main rewrote `RECOMMENDED_APP_NAMES` without touching the test,
which seeds `editor` and `camera` and asserts the result contains them. Neither
is on the list any more, so the resolved set came back empty and `test (base)`
has failed on every PR since.
The test now seeds the first two names off the list itself and asserts on those,
so the next edit to it cannot strand the test: prepending two unknown apps keeps
all four cases green.
* feat: let an extension waive a plan gate for one route or driver method
A plan gate about to refuse a caller now emits
`subscription.gate.<surface>` through `emitAndWait` first:
`route.<method>.<path>` for a route, `driver.<iface>.<method>` for a driver
method, `share.anyone` for link shares. The payload carries the actor, the
request and the requirement, and a listener that sets `allow` waives the plan
for that call. Callers the plan already covers never reach the hook, and a
listener that throws leaves the refusal in place.
* feat: mint godmode apps their own full-access token
`/auth/get-user-app-token` answers a desktop launch of a godmode app (the
`godmode` column) with a full-access token instead of an app token. Origin
lookups, the sign-in popups for pages outside the desktop, keep getting
ordinary app tokens, and only a web session may mint one.
The token carries the app in `godmode_app_uid`, read into
`accessToken.godmodeApp` for attribution only: `effectiveApp` stays null, so
it keeps the account's reach and passes the same gates as a personal access
token, including the vendor-compatible AI routes. It is refused once the app
is gone or no longer godmode.
Its row is an `access_token` session parented to the web session that asked,
with `app_uid` set, so signing out, revoking that session or revoking all
sessions takes it along, and the sessions list shows it under the app. Each
mint re-signs onto the same row with a 12h `exp` and moves the row's expiry
out, so the desktop keeps an open app alive while a copy taken earlier still
expires on schedule.
A full-access token may now mint scoped tokens (read URLs), parented to its
own row; it still may not mint full access. Revoking a full-access token
cascades to the tokens it minted.
An access token whose session row has a parent now authenticates only while
that parent is live, so a read URL a godmode app minted lapses with the app's
token, and through it with the desktop session.
* feat: launch godmode apps on their own token and renew it
The desktop asks for a godmode app's token at launch and blocks the launch if
it can't get one, as it does for other apps; a godmode app never runs on the
desktop's session token. While the window is open the desktop re-mints the
token once less than 6h of its 12h remain, checking on a timer and when the
tab becomes visible, and answers the app's `reauth_required` with a fresh one,
posted to the app's origin.
puter.js keeps a godmode token in sessionStorage like a session token, never
in localStorage. In app mode a 401 on a godmode token, background requests
included, asks the desktop for a new token and replays, and a `puter.token`
message is only taken from the embedding frame.
The sessions list shows a godmode token row with its app's title and icon.
* fix: keep a godmode token the same across renewals
Apps hand their launch token to code that never sees a replacement (the
terminal's Drive mount, a CLI's API key), so a token re-signed every renewal
broke those copies once the first one expired. The JWT now carries no `exp`
and a renewal moves only its row's expiry, so every copy keeps working while
the desktop keeps the app alive.
What still bounds it:
- only the desktop's web session can extend it; using the token never does,
and signing out or revoking that session revokes it;
- it lapses 12h after the desktop last asked, and a lapsed row is never
revived: the next launch gets a new token;
- however often it is renewed, a token is replaced after 7 days, and the old
one is revoked on the spot along with the tokens it minted and its sockets.
The desktop no longer re-posts a renewal that kept the same token, so the
app's sockets aren't rebuilt every few hours; an app that reports its token
stopped working is always answered.
* fix: reserve the feedback and no-reply mailbox names again
Signup checks names against `util/reservedUsernames`, but `fbl`, `noreply` and
`no-reply` were added to a second copy of the list in AuthController that
nothing reads any more, so they became claimable. Move them into the live list
and drop the copy.
---------
Co-authored-by: Daniel Salazar <[email protected]>
* fix(thumbnails): duplicate a copied thumbnail with GetObject + PutObject instead of CopyObject
CopyObject names its source as `<bucket>/<key>` in a header, which skips
any path in the client's endpoint, so it can miss an object that
Bucket/Key requests reach. The copy handler now reads the source object
(still behind the HeadObject size bound) and writes it under the copy's
key with its content type.
* fix(thumbnails): check the GetObject length before buffering a copied thumbnail
The size check runs on a HEAD and the read on a separate GET, so an object
replaced in between was read whole into memory. Reject a GET response whose
length exceeds the cap and destroy its body before reading.
* docs(agents): no credits or bug-report mentions in commits and PRs
* fix(ai): chat credit gate ceiling, in-flight holds and disconnects
- Cap output at min(max_tokens, context - prompt). The gate used
max_tokens - prompt, so any prompt longer than a model's output limit
was refused with 402 regardless of balance. Gemini 2.5 Pro's output
limit corrected to 65,536.
- Abort the upstream stream when the caller disconnects (driver calls and
the OpenAI/Anthropic-compatible routes), which ends the credit hold.
- A request refused only because the account's own in-flight requests
hold its balance gets 429 `credits_reserved` instead of 402; puter.js
retries it with exponential backoff (1s to 30s, about 2 minutes).
- When the balance caps a completion and it uses the whole cap, the
response carries `usage_limited` (non-stream `metadata`, stream `usage`
line), which puter.js already turns into the upgrade prompt.
* perf(ai): read the balance and its holds once per credit gate
The gate re-read holds, and the whole balance when any were held, to tell
spent from committed. getUsageHeadroom returns both halves from the same
reads getRemainingUsage already did.
ClickHouse's app_opens.app_uid is FixedString(40) and fails the whole
query on a longer value. Marketplace callers pass item ids into
getAppsStats, so one long listing-request id turned the seller's
listing-request list into a 500. Such ids can't have opens; they now
resolve to zero without being queried.
* fix(auth): issue reauth tokens only for browser sessions
A rejected token's 401 carried a signed reauth_token, which /signup turns
into a session on a temp account. Any revoked app or access token, a stale
token from a deleted app whose uid was reused, or a worker credential could
get one. Only a GUI/browser session's rejection now carries a reauth_token;
everything else still gets reauth_required without it. The stale-app check
also runs before the session is touched.
* fix(events): refuse worker creation from an events handler
workers.create minted a worker token with no handler depth, so a handler
could deploy a worker and chain writes through it at depth 0. A handler
actor can no longer create a worker; delivery, deploys and hot reload mint
from plain owner actors and are unaffected.
* fix(ai-ocr): bound the page count's parsing and close its under-counts
- Object-stream headers are capped (/N, /First) and read incrementally, and
the inflate budget scales with the file, so a crafted PDF can't spend
seconds and gigabytes before the credit check.
- An escaped /ObjStm type, an indirect /Count, untyped page leaves and an
object redefined to a smaller tree no longer lower the count.
- An account with no balance is refused before the file is parsed.
* fix(fs): add a switch to stop accepting pre-binding signed URLs
Signed URLs issued before owner binding are still accepted, and owner-signed
ones never expire, so the move-to-another-tree attack stays open for them
indefinitely. legacy_file_signatures (default on) can now turn them off, a
rate-limited warning counts their use so it's visible when they've died
out, and a non-UUID uid is refused before the entry lookup.
* fix(fs): hide the issuer's home uid from a scoped token's entries
A token scoped below the home could still learn the home's uid as the
parent_uid of a direct child (e.g. stat on ~/Documents). For access-token
actors that can't list the home, a direct child's parent uid is now null in
the v2 and legacy entry shapes, using the same rule as the root listing.
* fix(gui): ask for the 2FA code on the last step, right before enabling
The setup flow verified a code before the recovery-codes screen and sent
that same code to enable afterwards; by then it had usually expired, and
the user was sent back to the start. The code is now entered last and goes
straight to enable; a wrong code keeps the user on that step, and other
failures show the server's message. Enter submits the password step.
* test(fs): expect the legacy-signature flag in the signing config
* fix: apply the review's follow-ups to the merged-PR fixes
- Reauth tokens also require the session row to be a browser ('web')
session, not just the absence of the worker claim.
- The OCR page count only treats an untyped object as a page when it sits in
a page tree's /Kids, so outline items, widgets and name-tree leaves can't
inflate an honest PDF's count.
- The signed-URL uid guard checks the uuid's shape only, so a legacy row
whose uuid has nonstandard version/variant bits still resolves.
reclaimByUuid (#4064) cleared `database_id`, which exists only in the SQLite
and Postgres schemas. On MySQL the UPDATE fails with "Unknown column", so
ensureSystemSite throws: the puter-profiles row stays registered to the
admin, the site keeps 404ing, and every profile save returns 500 as it
retries the bootstrap. puter-app-icons takes the same path if its row isn't
already protected. System rows never carry a database binding, so there is
nothing to clear.
* fix(ai-ocr): check credits for the whole document before calling the provider
The pre-flight checked one page's cost because the page count was only
known from the provider's answer, so a 130-page PDF passed on a balance
worth a fraction of it and drove the account negative.
The driver now estimates pages before the call: a PDF's own count (read
from its page tree, including compressed object streams), capped by a
`pages` selection; one page for images and Textract, whose synchronous
API reads single-page documents. Other documents and PDFs it can't read
count 20 pages per MB, Mistral's 1,000-page limit at its 50 MB size cap.
The estimated cost is checked and held while the provider runs, so
concurrent calls see it. Usage is still metered from the pages the
provider reports.
* fix(ai-ocr): price the credit hold at the AI cost factor
Billing scales OCR usage by the ai.cost.factor hook, but the hold was sized
at the raw cost, so a balance covering N pages passed the check and was
then charged more. Hold through reserveAiCredits like the other AI drivers.
Follow-up to #4048. original_path/original_name decide where a GUI restore
lands, and the owner's restore is unchecked, so whoever sets them can aim a
file at another app's AppData root and block that app's launch. #4048 only
pinned them on move for non-account actors; a write could still set them,
and a share recipient's session counts as account context.
Writes now drop the trash keys for every caller. On move, only the account
that owns both source and destination may set them; anyone else moving into
the owner's Trash gets them recomputed from the entry, and other moves drop
them, including keys already on the row. Copies drop them on every branch.
The GUI only offers Restore for direct children of Trash, since nested rows
never carry legitimate trash metadata. The AppData/Trash checks for
cross-app deletes and create grants now ignore case, like the root guard.
Follow-up to #4052. A failed subscription lookup was cached for 5 s, but the
credit cache built from its fallback plan lived 15 s, so a paid user who
had spent past the free allowance got 402s for ~15 s after one failed read.
Credit entries built from a provisional answer (a failed lookup, or an
actor missing its email or numeric id) are now capped at that answer's
expiry and don't drive credit-state alerts.
A failed lookup that finishes after a concurrent successful one no longer
replaces the good cached answer, actors without a numeric id aren't cached
(resolvers key on it), and a failed credit refresh fails open briefly
instead of replaying a stale answer or blocking on the failing store.
The /metering/usage/:app handler repeated the "an app reads only its own
usage" check while the service still let any app read the global bucket.
The service now refuses an app actor anything but its own app, and the
handler only resolves names. Status codes for app actors are unchanged; a
user reading os-global gets their global usage instead of a name-lookup 404.
whoami no longer sets taskbar_items to undefined for app actors, and only
keys with a value count as built, so a listener can't fill one in for an
app. getMonthlyUsage's JSDoc notes allowanceInfo is account-wide.
New /sign signatures are an HMAC over uid, action, expiry and the entry's
owner at signing time. /file and /writeFile resolve the entry first and
verify against its current owner, so a move that hands the entry to another
account ends its URLs and stops /file minting child URLs from them. The URL
shape is unchanged; signatures in the previous format still verify, without
the owner check.
The per-account socket cap looked a plan up directly in its map, so
org_seat_free (team seats on a free team) got the paid cap. Route and
events limits already gave an unlisted free plan the default free entry;
that rule now lives in one helper, subscriptionOverride, used by all three.
Also publishes the socket connection caps, corrects the seat-plan line in
rate-limits-and-quotas.md, and makes the isFreeSubscription test assert
literal ids.
Setup returned a fresh secret and recovery codes to any session, and enable
flipped otp_enabled without proof of the secret, so a stolen session could
enroll its own authenticator and lock the owner out. Setup now lives at
/user-protected/setup-2fa behind the same password / OIDC revalidation gate as
disable-2fa, and enable requires a live code for the stored secret. The GUI
setup window asks for the password (or opens the revalidation popup) first,
and sends the code it already collected to enable.
An events handler could mint a fresh token for its own app through /sign or
/auth/create-access-token, and writes made with it started a new chain. An app
token minted from a handler token now carries its handler_depth and expires
with it; an access token carries the depth at the lifetime asked for.
Follow-up to #4056. Icons and profiles are now written as the system user,
so on a storage-limited install they counted against its allowance (100 MB
by default) and every write past that returned 413, including a user's
profile save. Both writes now pass the unmetered allowance, as writes the
system makes on users' behalf already may.
ensureSystemSite reclaims a mismatched subdomain row in place instead of
delete+create, so the name is never free for a user to register, the row
keeps its uuid, and `protected` is never cleared; the previous holder's
bindings are dropped. If the row vanished since the read it falls through
to create. puter-app-icons is now protected like puter-profiles, both names
are reserved from user registration, and they live in util/systemSite so
the subdomain driver doesn't import the services. The icon service's
shutdown wait is capped at 5 s so a stalled run can't hold up the metering
flush.
* fix: register system sites to the owner of their directory
The hosting middleware refuses a site whose user doesn't own its root
directory (absent a manage grant). The app-icons and profiles bootstraps
always registered their subdomain to the admin, but the directory can belong
to another user: a carried-over `/system` owned by the `system` user, which a
new child directory inherits. Those sites then 404 on every request.
Both bootstraps now go through ensureSystemSite, which registers the
subdomain to the directory's owner and replaces a row registered to anyone
else or pointing at another directory.
Fixes#4045
* fix: own system sites by the system user
`/system`, `/system/app_icons` and `/system/profiles` and their subdomains
belong to the system user, and icon and profile files are written as it.
ensureSystemSite re-owns directories another account created and replaces a
subdomain row registered to anyone else, so installs bootstrapped under the
admin move over on boot.
The bootstrap no longer waits for an admin account, so DefaultUserService
stops re-running it, and deployments without an admin get icons and profiles.
AppIconService lets in-flight icon runs finish on shutdown.
* fix: scope whoami billing details and monthly usage to the calling app (PUT-2015)
* fix(metering): refuse an app another app's detailed usage (PUT-2015)
* fix: keep launch tokens out of URLs and storage (PUT-2040)
- Strip the consumed launch token param from the app URL after load
- Never persist user session (godmode) tokens to localStorage; purge any stored one at boot
- Worker log socket sends the token as its first message instead of in the URL path
* fix: strip the private-app sign-in token from top-level URLs, keep godmode tokens across reloads (PUT-2040)
- Private-app gate: a top-level GET carrying ?puter.auth.token= that passes the gate gets the sticky cookie and a 302 to the same URL without the token. Framed launches are untouched.
- Godmode session tokens go to sessionStorage (never localStorage), so a frame reload stays signed in; cleared on sign-out or when an app token replaces it.
A personal access token scoped below the account (e.g. the one in an
account-minted getReadURL() URL) has effectiveApp === null, which the durable
list/unsubscribe/ack scope check and notif fetch read as account context. Gate
those on isAccountContext, as workers/handlers/kv-handles already do, and refuse
such tokens on durable subscribe.
* fix(fs): keep a vacated username off-limits to other accounts for an hour
Renaming a home rewrites descendant paths in the database, but their
cached entries keep the old path until they expire. ACL grants a home by
path prefix, so whoever takes the old name next must not be able to
before those entries are gone. renameUserHome now records the vacated
name, and the claim check every username-claim site already runs treats
it as taken for anyone but the account that left it.
* test: seed recommended apps that are still in the default list
The default list no longer includes editor or camera, so the ordering
test found neither.
The chat gate read `model.costs` directly to decide affordability, cap
`max_tokens` and size the credit hold, while usage is recorded at cost
times the AI cost factor, so all three ran low by the factor on every
request. The gate now resolves the factor and applies it to both rates.
The factor is looked up by the key the provider records usage under.
Providers expose that key through `meteringModelKey` and use it when
recording, so the gate and the charge can't drift apart; the
unreported-stream backstop records under the same key.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MeteringService knew about AI: it built the cost-factor facade, resolved
the `ai.cost.factor.*` hook and, since the previous commit, offered
`reserveAiCredits`. Metering stays agnostic to what it meters, so all of
that now lives with the AI drivers in `drivers/util/aiCostFactor.ts`.
`withAiCostFactor(metering, events, driver)` returns an
`AiMeteringService`: the service with recording scaled by the factor,
plus `costFactor` and `reserveAiCredits` for gates. The speech providers
take that type. MeteringService itself has no AI methods left.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
A data URL's filename came from its MIME subtype, so `audio/mpeg`
became `input.mpeg` and `audio/x-wav` became `input.x-wav`. OpenAI's
transcription API picks the decoder from the extension and rejected
both. Map the MIME types whose subtype isn't the extension.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A streamed write sends the caller's declared size to the object store as
the body length. A body that ends short of it was rejected as
IncompleteBody and surfaced as a 500.
Text-to-speech, speech-to-text and voice-changer providers checked
affordability against the unscaled provider cost and never reserved it,
so the gate ran low by the AI cost factor and concurrent requests could
each spend the whole balance. They now go through
`reserveAiCredits`, which scales the amount by the model's cost factor,
checks it, and holds it until the request finishes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Remove models providers have deprecated or retired, add newly released
ones, and move provider defaults off retired models. Gemini video (Veo
via the Gemini API) is removed; Infron and OpenRouter skip models their
listings mark deprecated. xAI bills cached prompt tokens only at the
cached rate. Claude Sonnet 4.6 max output raised to 128K.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* contact form recipe
* Potential fix for pull request finding 'Network failures cause unhandled fetch rejections'
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* minor
---------
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* Update recipes for storing a small list and store per id
* Potential fix for pull request finding 'Clarify that IDs must be path-safe or properly escaped'
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
---------
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
The account tab only offered changing the avatar. Add a "Remove photo"
action, shown while a picture is set, that clears it via
update_profile({ picture: null }) and resets every avatar to the default.
On failure the hint line says so and the picture stays.
The tab can render before the profile loads, so the profile loader also
reveals the button once a picture arrives. Also move the avatar hint
into i18n.
Three permission routes sized their work by the request body rather than by
the route, so one call could cost far more than its rate-limit slot implies.
- `extra` and `meta` were only type-checked. They ride every row a grant
writes (up to 16) and are re-serialised into the per-(user, app) cache on
each miss, so they are now capped at 4 KiB.
- `/auth/create-access-token` took a `permissions` array of any length: one
permission check and one sequential INSERT each. It now uses the same
16-per-request cap the grant routes already had, and runs every entry
through the validator those routes use.
- Withdrawing an app's cross-app data grants looks them up by permission
text, and no index on `user_to_app_permissions` led with `permission`.
Indexed per engine, mirroring what mysql_mig_22 / postgres_mig_11 /
sqlite 0067 did for `user_to_user_permissions`.
`grant-dev-app` validated none of its input — not even the type of `extra` —
so it now runs the same validator as its user-app sibling.
Two paths could also carry a permission wider than the `varchar(255)` column
it lands in. `grantUserAppPermission` already rejected that after rewriting;
`grantDevAppPermission` now does the same, and `createAccessToken` checks it
before the session row a failing INSERT would otherwise orphan.
Caps are published in rate-limits-and-quotas.md. Every in-tree caller sends
one permission and a small `extra`, so none of them change behaviour.
A page the browser gives no origin to — one opened straight from disk, or an
iframe sandboxed without `allow-same-origin` — serialises its origin as
`"null"`. `appUidFromOrigin` logged that at error level on every attempt and
the GUI sent it on three endpoints, so each refusal cost a 400 and an
error-level line while the user got nothing useful.
An opaque origin cannot name an app to mint a token for, and is not a valid
`postMessage` target to deliver one to, so these clients are refused rather
than supported. Make the refusal quiet, early and legible instead:
- AuthService: drop the `console.error` and say what the caller should do.
The accept/reject set is unchanged; a 400 is already counted per route.
- puter.js: `signIn()` rejects with `unsupported_origin` before opening
anything, which covers implicit auth too since it routes through `signIn`.
The load-time warning now covers sandboxed iframes, console-only — a modal
belongs in nobody else's embed.
- GUI: a popup whose opener has no attested origin says so and closes,
instead of rendering a blank window and wedging on a failed exchange.
Also fixes two faults this made reachable: `PuterDialog.open()` prefers the
popup branch, which reaches the `puter` global before the constructor that
assigns it has returned (`puter is not defined`, no SDK at all); and
`showModal()` throws where modals are blocked. `openNotice()` does neither.
Ordinary http(s) sign-in is unaffected.
One conflict, in workerInvoker.integration.test.ts: #3997 fixed the same
gap-marker flake this branch did, with a different barrier. Took theirs
— waiting on the `ev:qf` counter, which `#handlerFailed` writes strictly
after `discard`, so the marker is in and the lease cleared by the time it
reads 1. Their ordering also asserts the counter before flipping `answer`
back to 200, which closes the redelivery-clears-failures hole this
branch's version had removed the line to avoid.
Converted the two `vi.waitFor` calls #3997 added to `waitUntil`, the
helper this branch introduced for the rest of the file. Neither is wrong
today, since the new block fakes no timers, but a `jump()` added near
them later would hit exactly the drained-backoff trap the helper exists
for.
It describes our local two-server MySQL replication setup, which is
internal tooling rather than anything a self-hoster or contributor
needs. It now lives in the heyputer repo alongside the other internal
docs.
The suite it documented stays: the header comment now states the
env-var gate directly instead of pointing at a file this repo no
longer carries.
* fix: misc events and kv issues found during recipes
* test: cover handler depth on narrowed actors and created notifications
* test: fix stale legacy batch directory upload test and seat user-agent flake
* test: wait for the refusal to be recorded before claiming its gap marker
The refused-delivery test waited for `depth(subId)` to reach 1 before
claiming the marker, but `discard` removes the entry and appends the
marker in its place, so the depth is 1 before, during and after. The
wait returned at once, and the claim came back `inflight` — the refused
delivery still held the lease it was invoked on — leaving the assertion
reading `undefined`. It only passed on the slack in `invoked`'s poll
interval, which a loaded runner takes away.
Waiting on the claim itself is the barrier the depth was standing in
for. Dropping `answer = 200` with it: `beforeEach` already resets it,
and a redelivery settling before the last assertion would clear the
failure count it reads.
WebDAV emits the same GUI events the FS controllers do, and had the same
confusion: the payload was masked for the actor and addressed to the owner. A
recipient mounting a shared folder in Finder reproduced the disappearing-item
symptom exactly.
/touch prefixed `/` before expanding, so `~/AppData/<app>/f.txt` became a literal
`/~/...` that no longer looked like a tilde path — the shape puter.js sends for
every app-relative write answered 404.
A recipient addresses the owner's entries by a masked `/<owner>/<uuid>/<name>`
path. Routes that resolve an existing row unmask it on the way in, but the ones
that create a new entry had nothing to resolve and ran the ACL check against the
mask itself, which names no row — so mkdir, touch and the batch write/mkdir/
shortcut ops answered 404 `subject_does_not_exist` inside any shared folder.
They now expand client paths the same way every other legacy route does.
The GUI events carried the same confusion the other way: the payload was masked
for whoever made the request but addressed to the entry's owner, who cannot
resolve another user's mask. The owner's client dropped the row by uid and then
failed to re-add it under a path it had never heard of, so anything a recipient
touched vanished from the owner's open window until a refresh. Those events now
publish the owner's real path; responses to the actor stay masked.
Also fixes the desktop's `item.moved` handler reading `metadata` as an object
when the wire carries a JSON string: the name of a trashed item came out empty
(trashing renames the entry to its uid), and re-encoding the string left the
restore path parsing a string instead of an object. The parse the dashboard and
the explorer already open-coded is now one helper.
* docs: add the easy teams recipe and playground examples
Covers the read-only surface an app actually has: list(), listMembers()
and listDirectory(). Adds the teams recipe tag the build validates
against, and a Teams section to the playground.
Each example handles the two states that are easy to confuse: teams
turned off on the deployment (not_found) and a team that has not opened
its directory to apps (team_not_found).
* docs: open the teams recipe with what it lets an app build
* refine
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
`holds one it could not answer, for longer each time` freezes `Date` so a
hold written as `now + backoff` reads back as exactly `backoff`. But every
wait in the file went through `vi.waitFor`, which advances the faked clock
once per poll — measured at 50ms a poll. Each poll between the hold being
written and read therefore ate into the value: CI read a 2s hold as 525ms
and failed, on main one run and on this branch the next.
Polling now goes through `waitUntil`, which retries on `performance.now`
and real `setTimeout` — neither faked — so the clock only moves where
`jump` moves it. The holds then read exactly 2s/4s/8s/16s, so the
assertion is an equality rather than a one-second window that a slow
enough runner could always slide out of.
The unit tests inject the driver error because sqlite has neither a read
replica nor foreign-key enforcement, so neither half of this bug can
occur locally — they prove the handling, not that the situation arises.
This suite runs two MySQL servers in real replication and freezes the
follower with STOP REPLICA, so the row really is gone on the primary and
really is still served by the replica, and MySQL raises the foreign-key
errors itself. Against the pre-fix code all four cases fail, including
the unhandled "Cannot add or update a child row" the reported 500s were.
Opt-in behind PUTER_TEST_REPLICA_LAG, matching the env-gated provider
integration tests and their skipUnlessEnv helper, so CI and anyone
without the containers skip it. It builds and drops its own database
rather than touching local dev data.
Review of the first pass turned up two holes that made it ineffective.
CacheReplicationService always deleted the keys a peer broadcast and
never adopted a payload, so tombstones stopped at the region boundary:
peers dropped the marker, kept caching deleted rows off their own
replicas, and the multi-region case the fix was for stayed broken.
Tombstones are now the one payload a peer adopts — they carry no row,
only the fact of a delete.
user_to_app_permissions keys both the app and the user, and the drivers
don't all name the constraint, so a deleted *account* was being read as a
deleted app: a live app got tombstoned, the request 404'd for the wrong
reason, and the dead account was never retired, so the client retried and
re-tombstoned indefinitely. The insert site now asks the primary which
parent actually went away and answers 404 or 401 to match.
Also: re-check the tombstone after a cache write lands, since a row
cached under a live tombstone is never looked at again; extend the guard
to #refreshCache, which update() could otherwise use to undo a delete;
stop markDeleted tombstoning an address the deleted row never owned,
which was blocking the account that did own it; let the primary rather
than the tombstone decide in batched lookups; tombstone the id key when
no cached row names the others; and correct the leaf-store comment in
stores/index.ts now that SessionStore depends on UserStore.
* docs: add the easy perms recipe
Covers the supported surface: request() and check(). Adds the perms
recipe tag the build validates against.
* docs: add a playground example per operation in the perms recipe
One runnable example for each section: request a folder, request the
email address, request apps or subdomains, and check before prompting.
* docs: open the perms recipe with what it lets an app build
* docs: ground the perms examples in the UI that would ask
A photo editor exporting to Pictures, a checkout emailing a receipt, a
launcher listing apps, and a settings toggle that reads its own state
without raising a prompt.
* refine
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
* docs: add the easy fs sharing recipe
share(), listShared(), getShares() and unshare() — the fs ground the
existing recipes do not already cover.
* docs: add a playground example per operation in the fs sharing recipe
One runnable example for each section of the recipe: share, mode,
listShared, getShares and unshare.
* docs: open the sharing recipe with what it lets an app build
* docs: ground the sharing examples in a document-editor flow
Each example now sits in the UI that would call it — a Share button, a
role picker, a shared-with-me inbox, an access list, ending a review.
* remove redundant examples and refine recipe
---------
Co-authored-by: Reynaldi Chernando <[email protected]>
A delete lands on the primary and invalidates the cache, but a concurrent
request that misses the cache reads a replica that hasn't applied it yet,
finds the row, and writes it back under a fresh TTL — 24h for apps, 15m
for users. Every write referencing that resurrected row then fails its
foreign key and escapes as a raw driver error, so the route 500s until
the TTL expires. Origin-bootstrapped app uids are deterministic, so the
same origin keeps hitting the stale row and never re-bootstraps.
Deletes now tombstone their cache keys before dropping them. While a
tombstone is live the read path goes to the primary and the write path
refuses to cache; re-creating a row clears it. As a backstop, a write
rejected for a missing parent is answered as one: 404 for a vanished app,
401 for a vanished account, with the stale entry retired either way.
Also fixes cascadeDelete's identity lookup, which selected a column some
schemas lack and so threw into its catch, skipping the invalidation
entirely; and drops SessionStore's private copy of isUniqueViolation in
favour of the shared helper.
The existing team-share suite resolves shares through listings and store
reads, neither of which enters the permission scan, so a scan that never
terminates leaves it green. These ask the question the product asks —
can this member open the file — via ACLService.check.
Add claude-sonnet-5-5 ($2/$10 per MTok, 1M context, 128K output) and move
the bare claude-sonnet / claude-sonnet-latest aliases to it. Sonnet 5.5
rejects non-default sampling params and disabled thinking, so it joins the
temperature-omit, effort, and adaptive-thinking gates.
Co-authored-by: Claude Opus 5.5 <[email protected]>
create() inserted on the primary then read the row back through the
replica, so a replica that had not caught up answered the same as a team
that was not there and the call threw. Nothing rolled the insert back,
and the owner membership was never written, leaving a team its owner
could not see but which still counted against their cap.
Read back through pread in create() and update(), seed the row cache
with the result, and delete the row if the read-back still finds
nothing. #cached no longer stores a null, which would otherwise hold a
lagging replica's answer for the full TTL.
The group path recursed without the anti-cycle state, so a grant issued
into a group the issuer belongs to resolved back into itself and the
scan did not terminate. Thread the scan state through the group scanner
and skip an issuer already on the path, matching the user-to-user path.
Readings produced under a non-empty path are pruned for that path only,
so they are no longer written to or served from the shared scan cache.
* fix: open shared links with the intended account
* refactor: validate shared account hints in the GUI
* fix: scope the shared-link account hint to plain top-level visits
The hint no longer switches accounts in popups, embeds or action flows, and
only counts next to a share path the GUI would open. It is dropped from the
URL before any switch or prompt, so a reload never asks again. An unsaved
recipient gets a dismissible choice (sign in, or continue as the current
account) instead of a picker with no way out.
---------
Co-authored-by: Daniel Salazar <[email protected]>
* feat: let the Contact Us form carry screenshots and recordings
The form doubles as our bug-report channel, and the bugs worth reporting
are often the ones that need a picture: a visual glitch, or something that
takes five steps to reach. Up to 5 images or videos may now ride along
with the message, delivered as attachments on the support email.
Nothing the client says about a file is believed. The endpoint takes bare
base64 and re-derives all three of the things that matter from the decoded
bytes:
- Type, sniffed from magic numbers and matched against an allow-list of
PNG/JPEG/GIF/WebP and MP4/QuickTime/WebM. A declared MIME is never read,
so it cannot smuggle anything past the list. SVG is excluded on purpose
(it carries script, and support tooling renders what it is sent), as are
the non-video brands that share MP4's `ftyp` box -- HEIC, M4A, JPEG 2000.
- The file name, reduced to a display label with the extension taken from
the sniffed type. PNG bytes named `payload.html` arrive as
`payload.png`; a name can never carry the CR/LF that would break out of
a Content-Disposition header, nor the bidi overrides that make
`report<RLO>gnp.exe` render as `report.exe.mp4`.
- Size: 10 MB per file, 15 MB per submission, counted on decoded bytes.
Encoded length is capped before decoding, so an oversized payload costs
a length check rather than a 10 MB allocation. The total stays well
under the 25 MB most providers enforce, since the outgoing mail base64s
these again.
Base64 is decoded strictly, reusing the round-tripping decoder that
already guards app icons -- `Buffer.from(s, 'base64')` silently drops
characters it does not recognise, and the round-trip is what rejects
bytes smuggled after the payload. That decoder and the image sniffer move
from appIcon.ts to a new mediaSniff.ts, which gains the video counterpart.
One request is now worth megabytes of parsing and outbound mail, so the
existing per-user rate limit gains a per-IP backstop (which the per-user
counter cannot see through freshly minted accounts), a concurrency cap,
and a Content-Length gate that refuses an impossible body before anything
decodes it.
Payloads are not stored. They ride the email; the new
`feedback.attachments` column records names, types and sizes only, so an
abusive submission stays attributable once the mail has been dealt with.
Also fixes the form posting an empty message when Send was pressed with
nothing typed, and surfaces submit failures instead of leaving the button
disabled with no explanation.
* fix: stream Contact Us attachments as multipart instead of base64 JSON
Base64 in a JSON body went through the global JSON parser before the route
ran: raw buffer, rawBody copy, decoded string, parsed strings, then decoded
Buffers plus a re-encode for the strict check. A max-size submission peaked
around 110-135 MB of heap for 15 MB of files, and the route's Content-Length
check ran after all of it.
Attachments now arrive as multipart/form-data, which the global parser skips.
Auth, rate limit, concurrency and the Content-Length 413 all run before the
body is read, and busboy enforces the count, per-file and total caps while
streaming, so only the decoded file bytes are held (~16 MB peak). On a broken
limit the reader stops and the response closes the connection.
JSON stays supported for message-only posts; a JSON `attachments` field is
rejected.
* fix: deliver Contact Us 413s instead of resetting the upload
Closing the socket on a mid-stream limit sent the 413 and then reset the
connection with the client still uploading, so the client could see a
reset instead of the error. After a limit trips, the rest of the body is
now read and discarded, bounded by the body budget; past the budget the
request is destroyed.
Adds an HTTP-level test through the full middleware stack (FormData
upload, unauthenticated refusal, 413 on declared length before the body
is sent, 413 on a chunked upload over the per-file cap), trims comments
to the AGENTS.md length rule, and drops a box-drawing test divider.
---------
Co-authored-by: Daniel Salazar <[email protected]>
Browser uploads (Dev Center deploy, puter.fs.upload) PUT file bytes
directly to presigned URLs on the public S3 endpoint. That cross-origin
PUT is preflighted, and the bucket had no CORS rules, so RustFS answered
without Access-Control-Allow-Origin and the browser blocked the upload.
s3-init now runs put-bucket-cors on every boot after ensuring the bucket
exists (idempotent). Origins are open because the presigned URL is the
credential and the SDK sends no cookies. Document how to re-run and
verify in doc/self-hosting.md.
The Security tab only rendered the 2FA card for accounts with a confirmed
email, so a seat — provisioned without one by design — had no way to
enrol from the UI at all. It was the GUI twin of the enable-route check
fixed earlier: the rule could be required of accounts that could not
satisfy it. The card now shows for a seat too, giving it the ordinary
authenticator flow: QR, manual secret, six-digit code, recovery codes.
Disabling is refused while the seat's team requires 2FA. Without that a
member could switch off the factor their team mandates and lock
themselves out of everything until they enrolled again.
No method pages: requiring 2FA and resetting a member's factor are team
administration, which the docs deliberately do not publish — only
`list`, `listMembers` and `listDirectory` are app-callable.
But an app acting for a gated seat does meet `two_factor_required`, and
an undocumented 403 leaves it nothing to go on. It goes beside
`password_change_required` in rate-limits-and-quotas, which already
explains what a team's administration does to a member's requests.
Adds the Mistral and document-annotation img2txt examples to the
playground, states that Textract takes no options, and drops the
normalize mentions from the img2txt docs and types.
The SDK now checks Mistral inline sources against the size a base64
upload can reach inside the 50 MB JSON body (36 MB) instead of the
10 MB Textract limit; 50 MB let 38-50 MB inputs through to a body-parser
413. Retired-model messages no longer cite vendor dates.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Model sync against Mistral's listing, docs and a live call per id:
mistral-ocr-latest now serves OCR 4.1, so the catalog pins it (with
mistral-ocr-4 and the retired-but-redirected 2503) to mistral-ocr-4-1,
adds mistral-ocr-4-0 and OCR 3 (mistral-ocr-2512 / -3 / -3-0), and
rejects the retired mistral-ocr-2505 before any upstream call. Mistral
usage is metered per model at vendor rates: $4/1000 pages for OCR 4.x
with $5 annotations, $2 and $3 for OCR 3, replacing the flat $1 and $3.
Textract now calls DetectDocumentText instead of AnalyzeDocument with
LAYOUT. The layout feature cost $4/1000 pages while we billed the
$1.50 detect rate, and it only added text-less LAYOUT_* blocks that put
blank lines into img2txt output. Multi-page PDFs and unsupported
formats become a 400 that names Mistral as the alternative.
Request shape: a model name alone now selects its provider, so calls
differ only by model; an explicit provider still picks its default and
must agree with the model. Mistral options gain tableFormat,
extractHeader, extractFooter and documentAnnotationPrompt; annotation
formats accept the REST (json_schema.schema) or SDK
(jsonSchema.schemaDefinition) spelling and are validated before
billing. Non-image documents such as DOCX go as document_url.
Response shape: both providers return model, text and blocks with a
0-based page; Mistral also returns document_annotation, which was
billed but dropped. img2txt resolves to that annotation when
documentAnnotationFormat is set and to the text otherwise; the return
is a string for every model, so normalize has no effect on it.
Input size: OCR input is capped at the provider limit (10 MB Textract,
50 MB Mistral), and web inputs in loadFileInput are streamed under the
cap instead of buffered whole, which also bounds speech2txt URLs.
Docs: img2txt models, options, input limits, return value and errors;
OCR limits in the quotas page.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Found by driving the flow against a live instance: a provisioned seat
could reach `configure-2fa/setup` but never `enable`, which demands a
confirmed email. Seats are provisioned without one on purpose (PUT-1792,
the team being the trust anchor), so requiring 2FA of a team would have
locked out precisely the accounts the rule is for — permanently, since a
seat cannot enrol and the rule never lifts.
The check now passes for an account a team provisioned; every other
account still needs its address confirmed, with tests either way.
The card's note was also a line too long and rendered clipped, so it says
the same thing in the space the layout gives it.
An owner toggle beside the directory one, confirmed on the way on since
it locks out every account without 2FA until they enrol, and unconfirmed
on the way off since that only lifts a requirement.
A per-member Reset 2FA action, shown only while the rule is on — with it
off a member can clear their own factor and needs nobody's help. The
confirmation says what it does and what it leaves alone: signed out
everywhere, told about it, password unchanged.
`require2fa` rides the Team shape and `update()`, and `resetTwoFactor()`
joins the module beside `resetPassword()`, whose docblock already says
2FA is left alone — the two now read as the pair they are.
Forcing 2FA makes lockout materially likelier, and nothing could clear a
factor except the account holding it — `resetMemberPassword` leaves 2FA
alone on purpose, and admin only displays it. A seat that lost both its
authenticator and its recovery codes had no way back.
Its own route and its own audit action rather than folded into the
password reset, so that method keeps the property its comment claims: a
password reset alone is not takeover. The two together are, and for an
account the team created and pays for that is the team's to do — but it
has to be chosen and recorded, not arrived at sideways.
Bounded to `org_owned = 1`: a joined member's own login is not a team's
to reach into. The member is told, and signed out everywhere.
`group.require_2fa`, toggled by the owner through `PUT /teams/:uid` and
recorded in the audit log like `directory_enabled` — it changes what
every seat must hold to sign in, so it is not something a team should be
able to alter silently.
Enforced by deriving, not by stamping a flag on the user: a stamp left
behind by a member leaving, or by the rule being turned off, would lock
someone out of their own account with no team left to clear it. The seat
row already joins `group` and is already read per request, so it carries
the flag and the gate costs nothing extra. Toggling busts those rows, or
turning the rule off would leave members locked out until the TTL lapsed.
The gate rides the same `allowUnconfirmed` opt-out as the other pending-
requirement gates, so the routes a gated member must still reach stay
reachable — `configure-2fa` among them, which would otherwise be walled
off behind the very requirement it clears.
Scoped to `org_owned = 1`: the owner is not a seat of their own team, and
a joined member is an ordinary self-paying account whose personal login
is not a team's to dictate. The owner is held to the rule at the point it
matters — they cannot turn it on without 2FA of their own.
OpenAI's o3-pro, Mistral's mistral-large-2512 and zai-glm-5-2, and
DeepSeek's deepseek-v4-flash / deepseek-v4-flash-vision-exp are no
longer served by their upstream APIs, so drop them from the hardcoded
provider model lists (closesHeyPuter/puter#3945).
DeepSeek's legacy chat/reasoner aliases and default model previously
pointed at deepseek-v4-flash; they now resolve to deepseek-v4-pro, the
remaining model in that catalog, so existing callers keep working.
Signed-off-by: Anuj Shrivastava <[email protected]>
Signed-off-by: Anuj Shrivastava <[email protected]>
* fix(kv): keep disableSharing entries out of other apps' events (PUT-1876)
Private kv keys and values are no longer delivered to cross-app subscriptions, including forwarded and durable deliveries.
* fix(fs): refuse usernames whose home path still holds another account's rows (PUT-1877)
Username claims (signup, save_account, change-username, OIDC, team provisioning) now also check for leftover rows under /<name>/, and the root listing only returns the actor's own home.
* fix(puter-js): reconnect the events channel after a server-side disconnect (PUT-1881)
A server hang-up is retried with a bounded backoff; persistent handlers survive it and get an optional onError when the connection can't be restored.
* fix(backend): let the graceful shutdown finish before telemetry exits (PUT-1948)
The telemetry preload no longer exits on signals; the entry point drains, tears down top-down, flushes telemetry last, then exits. DB pools stay open until teardown.
* fix(fs): reserve quota for signed uploads in progress (PUT-1880)
startWrite/startBatchWrite hold each upload's declared size in a per-owner cache reservation until it completes, aborts or expires, so a burst of starts can't all read the same committed usage. Caps in-flight uploads at 10,000 per account.
* fix(fs): refuse to complete a signed upload whose object never arrived (PUT-1951)
Completion now 400s when the object store reports the key missing (transient errors stay lenient), abort no longer deletes an object a live entry still uses, and a ghost entry is only removed after a second miss at its recorded location.
* fix(metering): move usage to v2 keys with a small totals item, per-model detail shards and a 3-month TTL (PUT-1949)
The billed item holds only totals; per-model detail lives in 100 hash-sharded items read in one batch and cached for 60s, and more than 5,000 distinct usage types in a month fold into other. Global and per-app aggregates store totals only, appTotals comes from a prefix listing, a refused path only skips the key that refused it, exact reads near the allowance are throttled per key, and every metering record expires after 3 months. September usage restarts at deploy; the monthly-charge claim stays on the v1 key through September so recurring charges don't fire twice.
* test(events): let the worker backoff test tolerate a loaded run
* feat(events): scale KV event fan-out with the key owner's plan
A KV change delivers to up to 512 matching subscriptions (2,048 filter evaluations) for a paid key owner and 128 (512) otherwise, inline values are dropped once more than 128 match, and paid accounts may hold up to 512 share handles per app. The owner's plan is only looked up when a change has more candidates than any cap.
* test(metering): seed the 150-app listing test directly so it fits under coverage
Closing an account that owns a team left `owner_user_id` NULL while
`deleted_at` stayed NULL, so the team remained live while every team
route resolves by membership — which the deletion cascades away. The team
could then not be administered by anyone, and the accounts it provisioned
could not be closed. Declined now in both directions: live teams via
`countOwned`, and soft-deleted ones still holding accounts via a new
store read, since a deleted team's accounts are suspended rather than
removed.
The cap lock gave up after 200ms and proceeded unserialized, so
overlapping provisioning could each read the seat count before any insert
committed. It declines instead; a single create never contends. An
unreachable lock backend is a 503 rather than a silent pass.
An account a team provisioned can no longer create a team of its own
(PUT-1890) — that is not the intended lifecycle, since such accounts do
not go through the normal sign-up path. Keyed on `org_owned = 1`, so the
owner and joined members are unaffected, and not via `teamsAvailableTo`,
which is permissive by design.
The directory declines scoped access tokens, as `listMembers` already
bounds non-account callers.
* fix(tools): spawn npm.cmd through a shell on Windows
* fix(tools): join the npm command line on Windows to avoid DEP0190
Passing args alongside shell: true warns on Node 24. Test the spawn
tuple as data and run a real npm spawn instead of mocking child_process.
---------
Co-authored-by: Daniel Salazar <[email protected]>
* feat: allow browser extension origins in auth requests
Add chrome-extension://, moz-extension://, safari-extension://, safari-web-extension://, and extension:// to the protocol allow-list so browser extensions can obtain app tokens via /auth/get-user-app-token.
Extract WEB_AND_EXTENSION_PROTOCOLS constant in validation.js so the allow-list is defined once and shared by AuthService, AppStore, and AppDriver.
* fix: harden the extension-origin allow-list
Review follow-ups on the extension-origin change:
- Require a host in `validateUrl`. Only "special" schemes need an
authority, so `chrome-extension:` parsed with an empty hostname and
slipped past the reserved-system-host guard in AppDriver.
- Lowercase the host in `AuthService#normalizedOrigin`. `new URL()`
lowercases http(s) hosts but leaves opaque ones alone, so one
extension in two spellings resolved to two app uids — two AppData
trees, two permission sets — and missed the origin blocklist.
- Drop `extension:`. No browser emits it, and it accepted
`extension://evil.com` as an app origin.
- Freeze the allow-list and derive `validateUrl`'s http(s) default from
`WEB_PROTOCOLS` so the two spellings can't drift apart.
- Pin the tests to the real uid derivation, use unique extension ids so
a row left by another test can't mask the bootstrap path, and cover
the host-less and near-miss schemes.
- Fix the prettier/eslint failure in AppStore.js.
---------
Co-authored-by: Daniel Salazar <[email protected]>
Signup links can carry a bonusCode. Core checks its shape and previews it through `puter.signup-bonus.check`, refuses a dead code before the abuse hook records the attempt, then hands a live one to `puter.signup-bonus.validate` after `puter.signup.validate`, which may raise the phone/card gates; the accepted code rides on `puter.signup.success`, and OIDC carries it in the signed state. `user.card-verified` is now awaited like `user.phone-verified`. The signup form shows the offer and sends the code.
Tokens under the `oidc-state` scope share one signing key, so the payload is
what says which job a token belongs to. The popup-return proof now carries a
`purpose` claim, and each verifier accepts exactly one kind of token.
The return leg also sets a single-use companion cookie, mirroring the nonce
`/start` already uses, and stamps the action its redirect lands on. Redeeming
a proof requires the matching cookie — consumed on success only, so a rejected
call can't invalidate an in-flight return — and the popup honors only a proof
minted for its own action.
The cookie is host-only, so `/auth/oidc/verify-popup-return` is also served on
the GUI origin and the popup redeems it same-origin. The return leg always
lands the popup on `config.origin`, where both the cookie and the route live.
* fix: new cache costs for claude
* fix: refuse app-issued scoped tokens on events handler and worker routes
An access token an app mints (e.g. a getReadURL() token) resolves
effectiveApp to the issuing app, so #handlerApp and listEventsWorkers
treated it as the app: it could publish, remove and list handlers, and
list or destroy the app's worker, regardless of its permission manifest.
Refuse any scoped token there, as the kv-handle routes already do.
* test: freeze the clock before the first backoff read in workerInvoker
The first hold was read on real time, so a slow run measured the 2s
backoff as 1s.
A public origin-bootstrap app row planted on an alternate hosting domain
could resolve ahead of the owner's private app and skip the private
access gate (PUT-1883).
- get-user-app-token canonicalizes hosted-subdomain origins before uid
derivation and bootstrap, so every hosting variant shares one app row
- the app create/update conflict check crosses hosting-domain variants,
so an existing alt-host stub is absorbed by the owner's create
- resolveOwnedAppForHostedSite and the canonical-uid lookup order
matches private-first with a deterministic id tiebreak
- GET /teams and /teams/:uid/members admit apps for teams whose owner opened
the directory; apps get active members' usernames only
- events.workers.list() from an app returns only its own worker
- hide account-session-only SDK methods from the public types
- unpublish the updateProfile docs page (redirects to getProfile)
- revokeReadURL() works through a new /auth/revoke-own-access-token route
* feat(ai): sync GPT-6 Sol, GPT-6 Luna, and Claude Opus 5.5
* chore: remove documentation changes from model sync
* fix(ai): bill OpenAI cache writes and long-context pricing
GPT-5.6 and later bill prompt-cache writes at 1.25x input and report them
in `cache_write_tokens`, inside the input total. Both OpenAI calculators now
split them out of the prompt count and meter them under their own key, and
the six GPT-5.6+ models carry the rate.
GPT-6, GPT-5.6, GPT-5.5 and GPT-5.4 (incl. Pro) bill a request with more
than 272K input tokens at 2x input (cached reads and cache writes included)
and 1.5x output for the whole request. Models declare this as
`long_context_pricing`, and the ledger overrides, the reported `usd_cents`
and the credit gate all apply the multipliers.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
* fix(ai): bill GPT-5.6 Sol at OpenAI's promotional pricing
The catalog carried GPT-5.5's $5/$0.50/$30, but OpenAI bills GPT-5.6 Sol
at $4/$0.40/$20 per million input/cached/output tokens, promotional
through at least 2026-11-21. PUT-1943 tracks re-checking before then.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <[email protected]>
`ExecService.launchApp`, reachable from `puter.ui.launchApp`, launched any
named app with no check on the target. Gate it: a godmode target may only
be launched by a godmode caller. Desktop launches (tile, double-click,
URL) call `launch_app` directly and are unaffected; `connectToInstance`
already had its own allowlist.
A root was free to be renamed or moved, so it could be parked on a
username no account held yet. The next account to take that name
provisioned a second root at the same path, and from then on either row
could answer a lookup of it — new entries inherit their owner from
whichever row resolved as the parent, so one account's files were
created owned by the other, and renaming the parked root dragged the
other account's subtree along with it.
Rename and move now refuse a root, every username claim checks the home
path before the user row is written, and renameUserHome refuses to heal
onto a path another account holds.
- ProfileService keeps each profile as /system/profiles/<uuid>.profile,
admin-owned and served by the protected puter-profiles subdomain
- GET/POST /profile; puter.auth.getProfile/updateProfile, with
getProfilePicture reading through them
- another user's profile is served only while its owner is on a paid
plan (profileGate.enabled kill switch); the hosted file is gated
through the new site.access.check hook the hosting middleware asks
before streaming any file
- SubdomainStore.create takes isProtected
- the GUI reads and writes the profile through the SDK
- docs: getProfile, updateProfile, UserProfile, limits
PUT-1859 PUT-1860 PUT-1861 PUT-1862
The clickjacking guard in #3912 pinned `event.source` to `messageTarget`,
which is only assigned when `env === 'app'`. On a third-party site it is
undefined, so the UI listener dropped every message and
showOpenFilePicker, showSaveFilePicker and showDirectoryPicker never
settled.
Split the two environments. `app` still pins the host frame, whose origin
is whatever the deployment is served from. `web` has no host frame — the
picker popups post back directly — so pin the GUI origin we opened them
on, plus the set of popups we opened. Origin pinning is safe there,
unlike the parent-frame case, because we chose the URL, so self-hosted
and local deployments keep working.
Falls back to the origin alone when `event.source` is null: the picker
calls window.close() right after posting and a discarded browsing
context can drop the source.
PUT-1867
* fix(ai): send stable, non-sequential user identifiers to AI providers
A precedence bug in the AI providers' identifier expression made every
request send `user: ":undefined"` (the ternary bound the app-uid suffix to
the whole `actor.user.id + actor.app?.uid` sum instead of just the suffix),
or read `actor.user.id` on a missing user. The same expression also shipped
the sequential internal user id, letting AI vendors correlate a single
account across apps and sessions.
All eight OpenAI-, Azure-, xAI-, Meta- and ZAI-style providers now build
the identifier through one shared helper, `aiUserIdentifier()`:
- `puter-<user-uuid>[-<app-token>]`: the random user UUID is always
preserved in full; `maxLength` constrains only the app-bearing form
- app attribution reads `effectiveApp`, so access-token requests name the
issuing app instead of looking like direct user traffic
- the app token is truncated to fit the budget, and omitted entirely when
the remaining budget is below 8 chars, where a truncation could collide
with another app's uid
- nothing is sent for the system actor
- Meta and ZAI keep a caller-supplied `safety_identifier` / `user_id`
override, applied before the helper result
`user` is deprecated by OpenAI; the SDK types direct callers to
`safety_identifier` (abuse detection) and `prompt_cache_key` (cache-hit
bucketing). The four OpenAI/Azure chat providers and MetaProvider now send
`prompt_cache_key` as well, defaulting it to the same per-user identifier
unless the caller supplies one; Azure's Grok branch drops both fields,
matching its rejection of unknown args. The cap comment cites only verified
limits: OpenAI's 64 for `safety_identifier` (from the SDK types) and Z.AI's
6-128 for `user_id` (from Z.AI's docs); Meta and xAI document none, so none
is claimed.
The xAI image `#edit` path now carries the identifier like generation, and
takes a named-options param so `user` cannot be transposed with the
adjacent same-typed `aspectRatio`.
Tests share a four-actor matrix (`user` / `user+app` / `access token` /
`system`) with `assertActorMatrixIdentifiers()` across the six
OpenAI-style suites; the helper has exact-string and boundary coverage
(size caps, zero-budget and sub-base cases, no dangling separator, UUID
never truncated, collision guard); the Azure Grok assertions run under a
real user actor so they cannot pass vacuously. 212 provider-suite tests
pass; typecheck and ESLint are clean.
* fix(ai): lock the vendor identifier down and keep vitest out of the test util
Meta and Z.AI no longer let `custom` override the abuse identifier; it is
Puter's attribution, not the caller's. The shared test util exposes pure
field pickers instead of importing vitest into a file the production
tsconfig compiles. The helper's length-cap comment now matches vendor docs
(Meta does cap `safety_identifier` at 64), the redundant budget branch and
the unused export are gone, and the per-user `prompt_cache_key` trade-off is
stated once in the helper instead of five times in providers.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
---------
Co-authored-by: 404oops <[email protected]>
Co-authored-by: Claude Fable 5.1 <[email protected]>
* fix(ai-image): sync image catalogs, unify request shape, document models
Model sync against every vendor listing and a live generation sweep:
Gemini stable ids replace the retired preview spellings (2.5 Flash Image
delisted ahead of its 2026-10-02 shutdown), OpenAI gpt-image-1/-1-mini/-1.5
are delisted but routable until their shutdown dates with gpt-image-2 as
the default, xAI gains grok-imagine-image-2.0 with its quality tiers,
BytePlus gains the 3K/4K tiers and per-model pixel bounds, Cloudflare
gains SDXL Lightning/Base and SD 1.5 Inpainting, Replicate gains a
schema-driven catalog of 88 additional models with version-pinned
community predictions, and every Together image route is excluded for
the third-party data-sharing requirement.
Request normalization: the driver collapses ratio/width/height/aspect_ratio
into one imageSize with aspect-versus-pixel intent, validates prompt,
quality and resolution once, resolves provider hints (short names or
full driver ids) and aliases with exact ids winning over resellers, and
hands each provider an immutable copy of the caller's args. Providers
share prompt validation, aspect snapping, and content-sniffed data URIs
so responses carry the right MIME type. Replicate predictions are created
once, cancelled on abort or deadline, and bounded in input fan-out.
SDK: txt2img copies caller options, rejects blank prompts with
prompt_required in every call form, and documents that normalize has no
effect because the image return shape is already uniform.
Docs: txt2img options per provider, provider defaults and discovery,
availability notes, a new image model catalog and pricing page, and the
image-generation limits in the quotas page.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
* fix(ai-image): sniff SVG outputs correctly, reject hex/exponent dimensions
imageDataUri only decoded the first 24 base64 chars (18 bytes) before
sniffImageMime, which cannot see an <svg> root behind an XML prolog -
SVG outputs from recraft-v*-svg models were being labeled image/png.
Decode enough of the payload to cover the 8 KB SVG sniff window.
dimension() accepted string number literals ('0x10', '1e3') as if they
were decimal dimensions; restrict to plain decimal notation.
* docs(ai): link to the model directory instead of a static catalog
The image model catalog and pricing page duplicated the always up to date
model directory at developer.puter.com/ai/models. Link to the directory
from txt2img-related docs and keep the Together data-sharing exclusion
note self-contained.
---------
Co-authored-by: Claude Fable 5.1 <[email protected]>
The token grant writes `flag:app-is-authenticated` on the user->app row,
but the check asked for `service:<app_uid>:ii:flag:app-is-authenticated`.
Those never match, and the parent walk reduces the question to a bare
`service` — a root every user holds by default — so the check answered
true for any app_uid and handed back an app-under-user token for an app
the user had never opened.
Read the row the grant writes, through one shared constant so the two
cannot drift again, and mint against the resolved uid.
A cancelled account picker no longer leaves `popup_signin_consent` set:
with no relationship there is no token to flip it.
Chat and video drivers keyed their provider and model maps on plain objects,
so `model` or `provider` values such as `__proto__` reached Object.prototype
and surfaced as 500s. Both maps are now null-prototype objects and reject
those names as ordinary unknown models.
txt2vid now rejects blank or non-string prompts with `prompt_required` before
any request, tolerates `null` in either argument slot, and copies the caller's
options before resolving the `duration` alias and output path so frozen
option objects work and caller objects are never mutated.
Co-authored-by: Claude Fable 5.1 <[email protected]>
`validateUserPerms` started the linked SQL traversal beside the flat read
and returned on a flat hit without awaiting it. The hit is the common
case, so nearly every user-permission check left a floating promise: with
`keep_alive_on_uncaught` unset no `unhandledRejection` listener is
registered, so a DB wobble inside the traversal exits the process.
Run it only when the flat read misses. That also stops a SQL walk the
cache had already answered.
A present-but-empty `app_uid` fell through to checking the user, where
every `fs:` scope on their own file answers `true` — a prompt settled by
a question nobody answered. It is a 400 now.
The launch-path check also sat outside any catch, so a rejecting read
would have taken the whole launch down instead of falling through to the
prompt. Renamed the seam it is injected through to match the function it
defaults to, since wiring the token-based sibling in its place would send
an app uid as a bearer token and silently always prompt.
Opening `/app/<name>?file=<path>` asked for consent on every launch: the
gate prompted unconditionally and never read the `fs:<uid>:write` grant
its own Allow had written.
`/auth/check-permissions` takes an optional `app_uid` so the account can
ask what one of its apps holds, and the launch gate skips the dialog when
the answer is yes. Sessions only — an app or a scoped token asking would
be a window onto its neighbours' grants.
* Redesign the Teams tab in the dashboard
Hero card with a lettered tile, role pill, handle and headcount; the
directory setting becomes a settings row with the shared toggle switch;
the add-account form gets labels, Enter to submit, and a copy button on
the one-time password. The accounts and record tables drop the grid for
hairlines, avatar tiles and status pills, and stack into labelled rows
on phones so actions stay reachable. Loading, empty and error states
get a skeleton, a create call to action, and a retry.
Also fixes audit dates showing 1970 (the audit routes send unix
seconds), the actions cell breaking the row border by being a flex
table cell, and the "0 suspended" clause on a healthy team.
* Use the dashboard's overlay dialog in the Teams tab, not UIAlert
Adds UIDashboardDialog, a confirm / alert / prompt card built like the
share and properties modals: mounted in the dashboard window, revealed
after a frame, dismissed by Escape, the close button or a backdrop
press-and-release, with a focus trap and focus restored on close. On
phones it docks to the bottom as a sheet. The Teams tab's confirms,
error alerts, seat-limit warning and rename/create prompts all go
through it; UIAlert and UIPrompt are no longer imported there.
A local `npm install` (needed to pick up main's new `postal-mime`) wrote
`"extraneous": true` onto a bundled `@clack/prompts` dependency. It was the
branch's only lockfile change and it does not belong to this PR.
CI caught three HTTP-level tests the earlier merge left behind, and they
were right to fail: dropping this branch's `manage` gate in favour of
main's row filter lost a case main's filter does not cover.
Main bounds an app to the rows it issued. A *scoped* access token is not
an app, so it was falling through unbounded — `/fs/stat` with
`return_shares` handed a `fs:<uid>:list` token the owner's whole share
list. Addresses stayed withheld, but who else can reach a file is no
more a narrow token's business than the addresses are.
So the filter is generalised rather than the gate restored: a scoped
token is bounded to nothing, since it issues nothing under its own name.
Filtering it by a null app would have been worse than not filtering —
that matches the owner's own rows. Apps and sessions behave exactly as
they do on main, and a full-access token still holds the account's reach.
The three tests now assert the answer instead of a refusal, including
the one whose name had always promised a refusal its body never checked.
Two textual conflicts, both additive on each side: `isAccountContext`
(here) and `isPlainUserActor` (main) are both imported and both used,
and the `stat()` note keeps both sentences — this branch's on who may
read an invite address, main's on the share-read limit it spends.
The rest is adapting to main, which grew its own answer to half of what
this branch was for. `listSharesOf` there bounds an app to the rows it
issued itself; this branch instead required the credential to hold
`manage` and refused it otherwise. Main's is the better mechanism — it
answers the app rather than turning it away, and it hides other
issuers' rows outright rather than redacting a field on them — so the
`manage` gate goes, and with it the two tests that asserted the
refusal. They are replaced by tests that hold main's line: an app sees
none of the invites it did not send, with or without `manage`.
What this branch still carries is the gap main does not close. Its row
filter only applies to apps, so a plain manage delegate still reads the
owner's invite addresses; `#maySeeInviteAddress` is what withholds
those, and its delegate tests pass unchanged. The `stat()` note is
corrected to describe main's behaviour rather than the removed gate.
Review call from the ticket's author: a team share is the team's, not
one colleague's to withhold from another, so a personal block should not
hide it. This drops the enforcement added earlier on the branch — the
listing, its total and the fs-event fan-out no longer filter team rows
by the recipient's block list, and the SQL fragment that did it goes
with them.
What a block still does for a team share is suppress the notification,
which was already true before this branch: it stops the interruption
without pretending to stop the access. Leaving the team is what ends
that. Said so in the block API docs, the settings copy and the code,
since the mismatch between the two was the original complaint.
The unshare sweep is untouched — that half of the ticket stands.
* fix: charge stat's return_shares against the share-listing budget
`return_shares` on /fs/stat and the legacy /stat runs the same work as
GET /share/shares, but was only metered under fs:stat's far more
generous limit — and the two scopes stacked instead of sharing one
counter.
Adds consumeRouteRateLimit(req, spec), an imperative charge that
resolves the key and per-subscription limit exactly as rateLimitGate
does, so a handler can conditionally spend a second scope when a
request flag makes the route expensive. Both stat handlers now charge
share:list before doing the listing work; SHARE_LIST_LIMIT moves to a
shared share/limits.ts so all callers pin the same spec.
Closes PUT-1597.
* feat: consumeRouteRateLimit takes the array spec form too
Review follow-up on #3870: a multi-window spec passed whole would have
read an undefined window and silently never pruned. Charge each window
in order instead, refusing on the first refusal, matching the gate.
Emits ai.cost.multiplier.<driver>.<provider>:<model> before recording AI
usage, so what a model costs to charge is policy an extension owns rather
than a number in core. Nothing listening records the provider cost.
MeteringService.withAiCostMultiplier(driver) returns a view of the service
whose recording paths scale costOverride by the hook's answer; every AI
driver hands that view to its providers, so all of them are covered without
touching provider code.
* feat: one recipient field in the sharing dialogs, with suggestions
Both sharing dialogs asked twice: a text field for a person, and a
separate select, label, note and button for a team. Which control to use
was a fact about the API — a bare string is read as an email or a
username, so a team could not be typed — not something a user should
have to know.
Now there is one field. Clicking it offers who this account shared with
before, the teams it belongs to, and the people in them; typing narrows
the list. Choosing an offer locks the field to that recipient, so a team
picked by name still goes out by uid, and the note about a team grant
reaching everyone in it appears at the moment it applies. Anyone already
on the access list is left out of the offers, and a typed address still
works untouched.
Past recipients are kept in the account's key-value store, so they
follow the user between browsers; a typed address that turned out to
belong to an account is filed under the username the backend resolved.
Colleagues are read one page per team, cached for five minutes, and only
looked up once the field is actually used.
The picker is one helper shared by both dialogs so the two can't drift,
styled through `share-suggest-*` tokens each host restates in its own
palette. It opens in the flow rather than floating, which a scrolling
modal body and a mobile bottom sheet would otherwise clip.
* fix: float the recipient suggestions instead of resizing the dialog
The list opened in the flow, which pushed the Share button and everything
under it down and back up as it opened and closed — a dialog that resizes
under the cursor. It now hangs off the recipient row, out of the flow, and
floats over what follows it.
It goes inside the row rather than after it, so the row is its containing
block; as a sibling it resolved against whatever was positioned further up
and landed at the bottom of the scrolling body. Being out of flow it can
be cut off by that scroll container rather than scrolling itself, so on
open it measures the room between the row and the nearest clipping
ancestor, caps the list to it, and opens upwards where below is too tight.
* fix: keep the recipient field focused when the picker is wired onto it
Both sharing dialogs focus the recipient field as they open, and the
picker then moves that field into its wrapper. Moving an element takes
it out of the document for an instant, which drops its focus, so every
dialog opened with the caret in the field opened with the caret on
<body> instead.
* fix: keep the recipient suggestions inside the screen
The list sized itself against the nearest clipping ancestor alone. That
ancestor is the dialog's own scrolling body, which reaches past the
bottom of a short screen — or of any screen once the dialog has been
dragged low — so the list was placed below the fold and the user saw
nothing at all. The viewport bounds it too.
* fix: stop the suggestions flashing a loading box over the dialog
Clicking the recipient field put up a panel saying it was loading before
it knew there was anything to load. For the many accounts with no teams
and nobody shared with before, that panel covered the Share button for
as long as the round trip took and then vanished again. It now waits a
beat before saying anything, and leaves whatever is already listed in
place while a reload is in flight. A list still on its way also no
longer swallows the Escape that closes the dialog.
* fix: do not double-encode the recipient field's placeholder
`i18n()` encodes what it returns, which is right for a string dropped
into markup and wrong for one handed to `.attr()` — the entities show up
as themselves. Nothing is lost today because only English carries the
key, but the next translation with an apostrophe in it would read
`l'équipe`.
* chore: drop the styles for the team picker the field replaced
The desktop dialog's separate team control went with the one recipient
field; its rules stayed behind. The dashboard's equivalents were already
removed with its own markup.
* fix: let Enter share from the desktop dialog's recipient field
Typing a name and pressing Enter did nothing there: the field is in no
form, so the only way to send was to reach the button. The Dashboard's
dialog has always submitted on Enter, and the field now takes Enter to
choose a suggestion, which makes a second press that does nothing read
as a dead key. The picker still gets the press first while it is
choosing a row.
A provisioned account read as a plain "Free" plan with an "Upgrade for
more features" badge: nothing said the account belongs to a team, and
the prompt asked for an upgrade only its owner can buy. Its free tier is
not the free plan either — org_seat_free is half the allowance.
The card now names the team on both paths: a paid seat keeps its tier
and status and gains "Managed by <team>", and a seat with no tier reads
"Team account" instead of an upgrade pitch.
The Home tab read /marketplace/subscriptions/current and folded every
failure into the free state: a non-OK response left `subscription` null,
and the catch said so explicitly. So a refusal rendered as a confident
"Free" with an Upgrade badge.
That is reachable: verification gates are default-on for authenticated
routes, and a team seat that still owes its password change is refused
there — it then reads Free while its team pays for a tier. A rate limit
or a blip does the same to anyone.
The plan card moves into its own method so a failed read can return
without touching it, leaving the card as it was rather than naming a
plan the account does not have. A 200 carrying no subscription still
reads Free, which is the one case that actually means it.
- A full-access token was denied the address while `shared-by-me` still
handed it the same rows, so the clause bought no privacy and cost an
API client the address `unshare()` takes. `isAccountContext` is the
boundary the rest of the codebase already uses for 'acting as the
account': plain session or full-access token, never a scoped one.
- The Dashboard share modal dropped a withheld invite entirely, since
its aggregate keys a pending row on the address — so a delegate saw no
sign of an outstanding invite and accessCount under-reported who could
reach the item. It is now kept, keyed on the share uid, labelled, and
without the controls that would need a recipient to address.
getShares (and stat's return_shares, which runs the same listing) gated
on #assertCanManage's default 'see' mode, so any credential that could
see the node got every unclaimed invite's raw email — including an app
handed one file by the picker, a list-scoped token on the stat surface,
and a manage delegate reading the owner's invitees.
Two bounds, matching the invariant clientShare.ts already claimed:
- An invite's address goes only to the item's owner and to whoever sent
it, and never to an app or token. A delegate can revoke only what they
issued, so withholding costs them nothing they could act on.
- An app or token must hold manage reach of its own to read the listing
at all; it answers for the ancestors too, which is not what being
handed one file grants. tryListSharesOf turns that into an empty
shares array, so stat itself keeps working.
The share dialog names an unattributable invite rather than rendering a
blank row with a dead revoke button.
Closes PUT-1806.
The billing view now names each seat's status; the console passes it
through to the picker so a cancel-pending plan can be kept, plus the
two strings that flow renders.
* fix: list a link share only while the owner's plan covers it
* fix: fs limits for signed urls
* feat: a paid plan counts as a verified card for the sharing gate
#3874 added 0084_share-anyone-with-link.sql, taking the sqlite chain's
target user_version to 80, but CURRENT_SCHEMA_VERSION stayed at 79 —
and the test workflow only runs on PRs, so main broke silently and every
open PR's 'test (base)' job now fails on it.
* feat(email): inline cid attachments and Puter mailbox delivery for sendTransactional
EmailAttachment gains cid/contentDisposition so the transactional driver can send inline images. The SDK's EmailAttachment typedef now comes from types.js, which already carried cid. Docs describe delivery to <username>@puter.email recipients and the not_found code.
* feat: share with anyone with the link (PUT-1580); gate sharing on a verified phone or card
Review follow-ups on #3872: deleteActiveGroup ran even when every
canManagePermission check was denied, deleting the index row while the
team's grant survived — unlisted live access, the class this PR exists
to remove. And memberIdsAmong's join left deleted_at unqualified, which
only works while jct_user_group has no such column; #live now takes an
alias.
Review follow-up on #3871: the flush-level rule — shared_app on the
button only when every entry came through one app — had no direct
coverage. An app share and a plain share folded into one digest now
prove the line and item link keep their attribution while the button
stays clean.
Uploads stream from the page, so closing the tab loses a nearly-finished
one with no warning. The beforeunload handler only existed behind
prompt_user_when_navigation_away_from_puter, which is off by default.
Install it unconditionally and have it consult window.active_uploads,
the registry the progress code already maintains. The feature flag keeps
its open-window behavior.
Uploads now register in active_uploads before the first await in the
init callback: an upload failing while the progress window was still
opening used to run its delete ahead of the insert, leaving a phantom
entry that would have made the tab unclosable.
feat: the team seat experience — no email required, forced password change, team label, and plan-based limits (PUT-1792)
Note: Bypassing the code owners rule, since there are couple approvals in place for this.
Code review on the previous commit confirmed three ways the block filter
inside readUserGroupPerms turned a reversible block into permanent loss:
canManagePermission reads the same rows, so a block-suspended grant
looked revoked to #revokeDownstream's cascade, to unshare's authority
gate, and to invite claiming — deleting re-shares and invites that were
supposed to come back on unblock. The scan is now deliberately blind to
blocks; a block suspends delivery only (listing, count, fan-out,
telling), which the share store filters itself through one shared
notBlockedSql fragment owned by UserBlockStore.
The team-unshare sweep also now covers what it claimed to: a member's
re-share *to another team* is revoked with them (group rows swept in
#revokeDownstream, user path included), and the sweep is skipped
entirely while another issuer's grant still backs the team — members'
re-shares rest on that authority and revoking them would orphan live
access. The blanket block-all note in settings now says team shares
still arrive, matching what the code deliberately does.
A sender a member blocked could still land items in that member's
shared-with-me — and grant them real access — by sharing with a common
team. The group grant is one row and cannot exclude a member, so the
block is now enforced where delivery is derived per member: the
permission scan, the inbound listing and its count, and the fs-event
fan-out all skip team rows whose issuer the member blocked. Nothing is
revoked, so unblocking restores everything. Blocking now also bumps the
blocker's permission cache so it bites immediately. Direct shares keep
their contract: existing ones stand.
#unshareTeam swept re-shares by listing members with a 200 cap and
never following the cursor, so members past the cap kept their orphaned
rows. It now walks the share rows in the subtree — the set that can
actually need sweeping — and filters those issuers to members, which
has no cap by construction.
`gui_params.teams_ui` stays the deployment-wide switch; with it off, the
tab now also renders for a signed-in user who passes the email-domain
allowlist (membership included, so seats see their roster). Anonymous
renders hide it, and the API keeps deciding real access either way.
`teams_allowed_email_domains` limits who may enter the teams surface;
unset keeps today's behavior. Gated on the two routes that constitute
entry — creating a team, and the listing that shows the tab — with the
same 404 a teams-off deployment answers, so the GUI needs no change and
a staged rollout is indistinguishable from the feature being off.
Members of an existing team always pass, whatever their domain: an
allowed owner brought them in, and the surface follows the team.
Deleting a team suspends every provisioned seat, but every member route
resolved live teams only — so the suspended seats could never be
deleted afterwards, stranding the accounts and, on the billing side,
their paused subscriptions. deleteMember now resolves the team
soft-deleted or not, matching the audit reader.
It also gains the guard enableMember always had: only the team's own
suspension qualifies. A platform-suspended seat could previously be
cascade-deleted by the owner, destroying an account Puter had frozen.
When an app shares on a user's behalf, the mail now says so — the
digest line reads 'alice shared report.txt via Mail App', preferring
the app's title, then its name, then its index_url host. Both the
per-item links and the 'Open Puter' button carry a new shared_app
query param (the app's name, or its uid) so the GUI can match the
share back to the app; the button only carries it when the whole
digest came from one app. Plain shares are byte-for-byte unchanged.
Also drops SHARE_EMAIL_BATCH_SECONDS from 30 to 5: the window only
has to fold one gesture's worth of calls, and every second there is
a second the common single-share email arrives late.
Closes PUT-1798.
Every team route except the directory refuses app and API-token callers —
administration belongs to the account console. Publishing provisioning,
credentials, suspension and audit in the app-developer docs invited
integrations that would 403 on their first request, so those thirteen
pages are gone and the overview is rewritten around what an app can do:
detect team context with list(), look up colleagues with listDirectory(),
and share with a whole team.
listDirectory — the one app-callable method — was also the only one with
no page; it has one now, leading with its consent gate. The team
recipient joins the share() docs, where the integration actually happens.
From the adversarial review of this PR.
The forced password-change gate could deadlock: it POSTed to the
cookie-only route with a bare fetch, and both initgui call sites open it
before update_auth_data mints the session cookie — a fresh browser with a
token URL 401'd every submit inside a non-dismissible loop. It uses the
session-cookie retry wrapper now, taking the caller's token because
window.auth_token does not exist yet on that path. It also gains the
logout footer its sibling gates have; a lost temporary password was a
hard lock with devtools as the only exit.
Password recovery refused for seats: the address is admin-supplied and
never verified, so whoever holds that inbox could take the seat over at
any later time. A seat's recovery channel is its admin's reset.
change-email gets the same seat guard as change-username and deletion —
the address is where admin-issued credentials go.
The login response now carries `team` alongside requires_password_change:
no-reload logins store that payload as window.user verbatim, and every
seat restriction keys on it.
Smaller: the team-badge tooltip no longer double-encodes; the create-token
hint for an emailless account stops pointing at a verification it can
never perform; the quotas doc records the halved org_seat_free allowance;
the config template tells upgrading operators how to keep the old flat
cap; the SDK suite covers emailless provisioning and the owner-only uuid.
Review catch by @Salazareo: `org_seat_free` reached `FREE_SUBSCRIPTION_IDS`
and so the `requireSubscription` gate, but two other surfaces decide on
plan and neither consults that set.
`bySubscription` maps name `user_free` and `temp_free`. A plan that
matches no key fell through to the top-level `limit` -- the paid cap --
so a seat outranked an ordinary free account: 240 event listings a minute
against their 120, and the same shape across the kv, notification,
subdomain and worker drivers. Both resolvers now fall back to the
`user_free` entry for anything in the free set, which covers every driver
at once and any free plan added later.
`subscriberOnly` compared against the two named ids, so a seat could
reach a paid-only model. It asks the set now.
A paid plan that names no cap of its own still takes the base, and an
unresolved plan still takes the base; there are tests for both so the
fallback cannot widen into "free by default".
* Dashboard Files: keep rows in sorted order when icons resolve late
renderDirectory appended each row as soon as its icon resolved. Icons for
weblinks and .app files are read from the file itself, so those rows always
landed at the end of the listing regardless of the sort column or direction.
Resolve every icon first, then append the rows in sorted order; renderItem
takes the pre-resolved icon and still looks it up itself for single-row
callers (socket adds, instant folder creation).
* Rename: store the new item name raw in data attributes and the editor
rename_file wrote html_encode(new_name) into data-name, title and the
name editor's value. jQuery's attr()/val() store strings literally, so a
file renamed to "a&b.txt" carried data-name "a&b.txt": the dashboard
Files tab, which re-reads data-name for column truncation, then showed the
entity on screen, type-to-select and sorting compared the encoded string,
and the editor reopened on the encoded name. The initial render already
stores these raw; make the rename path match.
* Dashboard Files: Enter with several folders selected enters only the first
The Enter handler called pushNavHistory + renderDirectory for every selected
folder. Only the first render runs (renderDirectory drops calls while one is
in flight), but every folder was pushed onto the navigation history, so after
selecting two folders and pressing Enter, Back led to the folder already on
screen and Forward to one that was never opened. Enter now navigates into the
first selected folder only; selected files still open in their apps.
* Dashboard Files: don't offer to move items the user can't move
Trashing or cutting sends an item to its owner's trash or a new folder, which
a shared root or a read-only share can't do — the server answers Forbidden and
the user gets an error alert for an action that should not have been offered.
The single-item context menu already leaves Delete out for such rows; the
Delete key, Ctrl/Cmd+X, the multi-selection menu and the mobile selection bar
did not check. Route all of them through can_restructure, skipping rows that
can't move and hiding Cut/Delete when the whole selection can't.
* Dashboard Files: hide New Folder and Upload in the Shared view
Shared is a query over other people's items, not a directory. Both buttons
stayed visible there: New Folder did nothing, and Upload opened the OS file
picker and then silently dropped whatever the user picked. Hide them the same
way Trash already does.
* Dashboard Files: let the same file be picked again after a failed upload
The upload input was only cleared in the success callback, so after an upload
that failed, was cancelled, or was blocked (Shared view), choosing the same
file again fired no change event and nothing happened. Snapshot the picked
files and clear the input as soon as the change fires. This also drops the
document.querySelector('form').reset() that reset whichever form came first
in the document rather than this one.
* Dashboard Files: read saved preferences in parallel and re-sort immediately
init awaited four independent kv reads one after another before the first
listing could start, and handleSort awaited two kv writes before re-rendering,
so a sort click cost two round-trips before anything moved. Issue the reads
together and let the writes settle in the background. While here, set
$el_window before the first await (renderDirectory reached through a route
change or socket event during init threw and left renderingDirectory stuck),
and tolerate a corrupt saved column_widths value instead of failing init.
* Dashboard Files: show the loading spinner on the first directory load
showSpinner keyed off a loading flag, but clearing the listing at the start of
a navigation removed the overlay without resetting it: init's spinner was
wiped by the first render's clear, and the render's own showSpinner call then
no-oped, so the initial load ran with no indicator. Guard on the overlay's
presence instead.
* puter_signed_upload_error_correction
* docs: update signed upload behavior
* fix(puter-js): complete a bodiless response in the XHR shim
A response with no body at all (`fetch` gives `null`) threw inside the
shim's own `then`, the same way a missing content-type did: no 'load',
no 'error', the request hangs forever. Signed storage PUTs answer in
exactly that shape.
Adds the regression tests the content-type fix was missing — all three
hang against the shim as it was.
* refactor(puter-js): drop the signed batch-write env allowlist
With `nodejs`, `service-worker` and `web-worker` added, the list held
every value `puter.env` can take, so the gate decided nothing — and a
new env would have been silently routed to the legacy path.
The backend capability check (`signedBatchWriteSupported`, set from a
404/405/501 on `startBatchWrite`) is the one that still does work.
* test: run the directory-upload suite on node and workers
Both were pinned to browser because the legacy `/batch` fallback cannot
create a directory tree. Now that every platform takes the signed path
they are the regression test for it, and the stale comment goes with
them.
---------
Co-authored-by: Daniel Salazar <[email protected]>
- PUT-1800: gate `createWorkerSessionToken` on actor type, so an app or an
access token can no longer mint an app-less, root-shaped worker session;
`WorkerDriver` binds on `effectiveApp` instead of `app`.
- PUT-1799: add `isAccountContext` and read it where "no app" was being read
as "the account" — handler publish, events-worker listing, kv handle
mint/revoke/list. A scoped API token is no longer an account session.
- PUT-1802: re-authorize a durable row before its backlog drains, settling it
permanently when the grant is gone. Covers an ancestor-level unshare, which
the revoke settle deliberately leaves to the delivery re-check.
- PUT-1803: mask the owner's absolute path out of deliveries and subscription
anchors on a foreign node, the way every FS surface already does.
- PUT-1804: let a revoke reach rows already suspended for a resumable reason,
re-stamping them so a resume cannot hand over the held backlog.
- PUT-1805: apply the subscribe path's audience gate to `/events/fetch` before
the query, so a cursor can no longer count and name invisible notifications.
- PUT-1807: refuse `mode: 'manage'` from any actor holding an app — inside its
own AppData the ACL short-circuit would otherwise supply the reach.
- PUT-1808: take the sending peer from the verified signature header rather
than the request body.
- PUT-1810: re-base a kv share-handle row's stored match filter on the handle,
so the owner's absolute key prefix stays hidden.
- PUT-1814: escape LIKE wildcards and anchor the issuer-prefix queries on a
segment; anchor `manage:` stripping; reject a backslash in a share prefix;
assert a resolved actor in `subscribeDurable`.
- PUT-1815: bound the char/varchar columns behind `event_subscriptions` and
`kv_share_handles` at the store layer.
The Usage card's Upgrade link relabels to "Manage →" for anyone on a
plan, including a seat whose plan is its team's. Following it only
reaches a dialog saying so. Hidden for a seat, unchanged for everyone
else.
`i18n()` echoes a key it has no translation for, and a team tier has
none — so a seat's dashboard read "team-basic" where a personal plan
reads "Basic". The offering already travels with the subscription, so
its display name is right there; `i18n` stays the fallback for the
personal tiers that do have keys.
`config.default.json` shipped `max_seats_per_team: 50`, and that flat
override wins over the plan, so the free/paid caps were dead code on
every deployment that did not delete the key. A free owner got 50 seats.
The defaults now carry the two per-plan numbers and leave the flat
override unset; a deployment that wants one number for everyone still
sets it and still wins.
`#ownerPays` asked metering about an `{id, uuid}` stub, so a resolver
keyed on any other field missed and the answer came down to whether
something else had cached that user's plan first — the same team, at the
same seat count, was refused or allowed depending on nothing.
Running out of seats now says what raises the limit and offers the plan
picker, rather than reporting the number and stopping there. The record
table pages at ten rows instead of running off the bottom, and the team
card no longer labels the absence of a handle nothing here can set.
A provisioned account could rename itself, delete itself, and see a
Billing tab for a subscription it does not hold — all of it the team's,
not the account's. Each is now refused server-side and dropped from the
UI, keyed on one predicate: whoami reports a team only for an org-owned
seat, and the owner joined their own team.
The Teams tab showed a seat nothing but its own audit rows, so a member
could not see who else was on the team they were told they shared it
with. It now lists them; listMembers was already membership-gated and
already withholds from a member what is not theirs.
The dashboard share modal had no way to reach a team, though the desktop
dialog has had one since team sharing shipped and the SDK has always
taken `{ team }`. Same control, same copy, same helper. The access list
needed a team bucket to go with it: a team share names no holder, so the
aggregate dropped it and a team you had just shared with vanished.
The per-account subscription button did nothing. `listMembers` never
returned a member's uuid, the SDK's `toMember` dropped it, and the Plan
column read `seatTiers[undefined]`, so every seat rendered as Free and
the action dispatched with no seat.
The uuid is owner-only: it is what billing keys a seat's plan on, and one
member has no business identifying another.
The Teams tab was asking which tier with a UIAlert, which looked nothing like
the personal plan modal. It now dispatches the seat and lets the extension
render the grid, so the two match and OSS stays free of prices.
Carries `username` and `currentTier` so the picker can title itself and mark
the plan the account is already on.
It described a team-wide tier, which stopped existing when plans moved to the
account. What it still showed -- what each tier costs -- is in the Change plan
picker, next to the account it applies to, so nothing is lost by removing it.
`teamPlan.js` and its tests go with it, along with twelve i18n keys nothing
reads any more. `state.plan` stays: the Plan column and the picker both need
the catalogue and the seat assignments.
Per-tier quantities need to know *which* seats are active, not just how many:
the count has to be split by the tier each one is on. `countActiveSeats` answers
the old question and stays for the cap and the console copy.
Keyed by `uid` rather than the numeric id, because the billing side holds uids
and would otherwise have to look the team up twice. Same suspension filter, and
a test asserts the two agree so they cannot drift apart.
Falsified: dropping the suspension clause fails "leaves out a suspended seat,
matching countActiveSeats".
A row now carries up to five actions -- change plan, reissue, suspend or enable,
delete -- and five labelled buttons do not fit the cell. Each becomes a 30px
icon button.
The label is not dropped, only hidden: it stays as `title`, as `aria-label`, and
as visually-hidden text, so a screen reader and a hover both still get it. The
glyphs are `aria-hidden`, since the button already carries the name.
Inline SVG rather than files under `icons/`: these are one-place 24px line
glyphs, and the dashboard already inlines its sidebar chevron the same way. An
`edit` glyph is defined but unused, ready for the account-edit action.
Falsified: removing the visually-hidden label fails "keeps the label reachable
without showing it".
Reverses PUT-1788 D1 at the UI. A team keeps one subscription; each account sits
on its own tier within it.
The plan card stops being the chooser and becomes a summary: what each tier
costs per account, and how many accounts are on it. Choosing happens on the
account, with a Change plan action per row, because that is the thing the tier
now belongs to.
`memberPlanLabel` reads the seat's own assignment rather than the team's single
tier, so two accounts can honestly show different plans. The other three states
are unchanged and still matter: the owner is the payer, a suspended seat is not
billed whatever it was on, and a seat nobody bought a tier for is free.
The action only appears where a billing extension is present and a catalogue
came back, so a deployment that sells nothing shows prices and no dead buttons.
Per-seat billing context without per-seat subscriptions. PUT-1788 D1 stands: one
tier per team, one Stripe subscription, quantity = seat count. The tier is still
changed once, in the plan card.
Four states, because "on Team Basic" is not true of every row. The owner is the
payer and keeps their own personal plan, so they show as such rather than
inheriting the team's. A suspended seat reads "not billed" -- it stops costing a
per-account charge, which is the same rule the billing summary and the plan
card's seat count already use. A seat of a team that bought nothing reads free,
which is the reduced org-seat allowance. Everyone else shows the tier.
The rule is a helper in teamsConsole so it is testable, like the rest of that
file.
Falsified: dropping the payer branch fails "says the owner is the payer, not a
seat"; dropping the suspended branch fails "says a suspended seat is not
billed".
Tiers beyond a model's default are reachable as `<model>:<tier>` ids, so
the chat docs gain a Service tiers section covering what the suffixes
mean, that the tier named is the tier billed, and that a tier can carry
a smaller context window than its siblings.
The listModels return value described a `cost` object with `input` and
`output` keys. No such field is returned — pricing comes back as `costs`
alongside `costs_currency`, keyed per vendor and named by the model's
own `input_cost_key` / `output_cost_key`. Correct the prose and replace
the example with a real entry.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Infron sells the same model at several service tiers. `min_prompt_price`
and `min_completion_price` are the floor across all of them, so every
model with a flex tier was advertised at a batch-job price nobody gets
by default: 25 of 286 chat models, among them gpt-6-astra at $5/$25
against the $7.5/$37.5 a default request actually bills.
Price each tier from its own row in `providers[]` and pin that tier on
the request, so the price quoted is the price charged. Tiers beyond the
default are listed under their own `<model>:<tier>` ids, letting callers
opt into flex or priority by model name:
puter.ai.chat(prompt, { model: 'infron:openai/gpt-6-astra:flex' })
Suffix parsing matches the catalog exactly before reading a trailing
segment as a tier, since catalog ids can carry a colon of their own
(`deepseek/deepseek-v4-flash:free`). Tier variants take the context
window of their own offering, which differs from the model-level figure
for 11 of them.
Billing was never wrong — it bills Infron's reported `cost` — but the
understated prices fed the credit gate's output cap, which let a request
run roughly 50% past the balance it was gated against, and the fallback
path that prices per token when a response carries no cost.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
It filtered on `org_owned`, but the GUI annotates members to `orgOwned` --
so the count was always zero and the card read "billed for 0 accounts" beside
an accounts table saying two.
Uses `membersBillingSummary` now, the same count the table shows, which also
excludes suspended seats: they stop costing a per-account charge, which the
naive filter would have billed for.
`initgui` runs the verification gates in two places: the token-in-URL branch and
the session-restore/login branch. The password gate went into the first only, so
it never fired for the case it exists for -- a seat signing in through the login
form with the credential its administrator issued. The account reached the
desktop and then failed at every gated call with no prompt, which is the state
the gate was written to prevent.
Caught by manual testing, not by any test: both chains looked right in
isolation. Added an invariant test over initgui's source asserting each gate
appears on both paths and each loops until cleared, which is the shape of the
mistake rather than the instance of it.
Falsified: removing the login-path gate fails "runs the forced password change
on both paths" with `expected 1 to be 2`.
PUT-1796's UI half. The owner already manages accounts here, so the plan they
are billed for belongs on the same page rather than a tab away.
Pricing stays out of OSS. The card is drawn from whatever catalogue the server
returns, so this code knows no tier, no price and no payment provider -- a
deployment that sells nothing serves no catalogue and the card does not render.
`TabHome` already reads `/marketplace/subscriptions/current` the same way, so
OSS reading a prod-served endpoint is not a new idea here.
Two things are deliberately not offered rather than offered and broken. A tier
the server marks unavailable gets no button, because no Stripe price is
configured for it and buying would 422. And no button appears at all unless a
billing extension has set `window.team_billing_ui` -- the prices still render,
which is useful on its own, but nothing invites a click nobody can handle.
Checkout is Stripe's, so the button only dispatches `team-plan-purchase` with
the team and item id and lets the extension take it from there.
The markup is a helper rather than another branch in TabTeams, matching
teamBadge/credits/usageBudget, so it can be tested without the window stack.
Falsified: offering an unavailable tier fails "offers no button for a tier with
no configured price"; rendering buttons regardless of the extension fails
"offers no button without a billing extension to act on it".
342 GUI/SDK tests, 136 team backend tests, typecheck clean.
Three related limits.
Seats per team now depend on the owner's plan: 4 free, 40 paid, decided by
`subscriptionSatisfies(id, true)` -- which is `!FREE_SUBSCRIPTION_IDS.has(id)`,
so a plan an extension adds counts as paid without core knowing its name. The
existing `max_seats_per_team` still overrides both, so a deployment that already
set it keeps what it asked for, and `max_seats_per_team_free` / `_paid` tune
each. An unreadable plan takes the smaller cap: over-provisioning a free team is
the worse failure.
A seat of a team that pays for nothing resolves `org_seat_free`, half the
registered free plan. Without it a team is a way to mint free tiers -- provision
four seats and each arrives with a full free allowance nobody paid for. The
figures are derived from `REGISTERED_USER_FREE` rather than restated, so the two
cannot drift, and the id joins `FREE_SUBSCRIPTION_IDS` because nobody paid for
it either and it must not satisfy a plan gate.
It is a *default* resolver, so a paid team tier -- which only prod knows about,
through `registerSubscriptionResolver` -- still outranks it. The lookup is
`getOrgSeat`, already cached with its negatives, because almost nothing is a
seat.
Found while testing: the suite was reading `max_seats_per_team` out of the
developer's own config.json, so the cap under test was whatever that file said.
It would have passed here and failed in CI, which has no such file. The suite
now pins the value and the cap tests set their own.
Falsified three ways, each breaking only its own test: equal caps fails "lets a
paid owner past four"; a resolver returning null, and an unhalved allowance,
both fail "resolves half the free plan".
186 team/whoami tests, 159 metering tests, typecheck clean.
A provisioned account had no way to know it was one. That matters: the team can
reset its password and close it, which is exactly what the account-created email
already warns about, and nothing in the product repeated it afterwards.
`whoami` now carries `team: { uid, name }`. Two gates on it. Only user actors --
a seat's employer is no more an app's business than its phone number, which the
same handler already withholds. And only where `teams_enabled` is on, so a
deployment without teams is byte-identical.
It rides whoami rather than a route of its own because the sidebar needs it at
first paint. A `/teams/whoami` would add a request to every page load for every
user, and almost none of them are seats. The lookup costs nothing either way:
`getOrgSeat` is already cached, negative results included, precisely because
almost nothing is a seat. `team_name` comes off a join the query already made.
In the sidebar it sits under the Puter wordmark -- the conventional slot for
workspace context -- as a muted second line, hidden when the sidebar collapses.
Owners see nothing: they already know, and one may own several teams, so there
would be no single name to show.
The markup is a helper rather than another branch inside UIDashboard, matching
how appGroups/credits/usageBudget were pulled out, so it can be tested without
mocking the window stack.
Falsified: dropping the `isUser` gate fails "withholds it from an app actor" and
nothing else.
181 backend tests, 331 GUI/SDK tests, typecheck clean.
Follows the previous commit. Dropping the email field entirely went one step too
far: without an address the temporary password shown once in the panel is the
only copy, and an admin who closes that panel has to issue a new one. The field
is back, marked optional, and now it buys something concrete.
`team_account_created` carried no credential -- it said the team "will send you
a temporary password separately". It now carries the username and the temporary
password, so an admin who supplies an address hands nothing over by side channel.
`#notifyUser` takes extra template variables, and both credential-issuing paths
pass the one they just minted: provisioning and re-issue. Re-issue passing the
fresh credential rather than the stale one is the case worth checking, and there
is a test that asserts the old password is absent from that mail.
With no address nothing is sent, which was already true -- `#notifyUser` returns
early without one -- and is now covered.
The docs said the notice carries no credential in two places. Both corrected.
Falsified: dropping the credential from the re-issue call fails "emails the fresh
credential on re-issue, not the old one" and nothing else.
178 backend tests, 326 GUI/SDK tests, typecheck clean.
The backend already refused every route with `password_change_required` until a
provisioned account replaced the password its administrator chose, and
`/user-protected/change-password` was already exempt so the account could act.
The client half was missing entirely: nothing in the GUI referenced that code,
so a seat signed in and then failed at everything with no prompt and no way out.
Two gaps, both closed here.
The flag never reached the client. Neither the login response nor `/whoami`
carried `requires_password_change`, so the GUI could not have known even if it
wanted to. It ships from both now, alongside the other three verification flags
the whoami extension already describes as "the flags the GUI acts on".
There was no window to show. `UIWindowChangePassword` is a settings dialog --
closable, and it never resolves on success -- so it cannot act as a gate.
`UIWindowPasswordChangeRequired` mirrors the existing `*Required` windows: it
resolves true only once the change lands, and `initgui` loops on it. It runs
last in the boot chain, matching the server order in assertVerifiedAccount.
It refuses a new password equal to the current one. Without that the account
stays on the credential its administrator still holds, which is the entire thing
the gate exists to end.
Falsified twice: dropping the same-password guard fails "refuses to reuse the
password the admin handed over", and resolving on a rejected response fails
"stays open on a rejected change, so the gate cannot be escaped" -- each
breaking only its own test.
175 backend tests, 326 GUI/SDK tests, typecheck clean.
PUT-1792. Two separate problems, both from treating a provisioned account like
a self-registered one.
`email` was required, so an admin creating ten seats had to invent ten addresses
and then keep track of ten uniqueness constraints -- for accounts that sign in
by username and never use the address. It is now optional at every layer, and
the add-account form does not ask for it at all: username is the only thing a
seat needs.
`requires_email_confirmation` was set to true, with the reasoning that an
admin-supplied address is unverified. True, but `requireVerifiedAccount` turns
away on exactly `requires_email_confirmation && !email_confirmed`, so a
freshly created seat was asked to confirm an address it may not hold and could
not use the product until it did. The team creating the account is the trust
anchor, not the mailbox, so this is now false either way.
An address is still accepted and still stored when given, because the notices
are worth delivering. `#notifyUser` already returned early on a missing
address, so `team_account_created`, `team_account_disabled`,
`team_password_reset` and `team_closed` degrade quietly with no new branching --
the temporary password is in the API response, which is the documented delivery.
`idx_user_owned_email` is partial and skips password-null rows, so omitting the
address sidesteps it rather than creating a collision surface. Two seats with no
address do not conflict, and there is a test for it.
Docs now say an emailless seat is recoverable only through its team's owner.
That falls out of the design rather than being a limitation of this change, but
it should be written down rather than discovered.
Falsified: putting `requires_email_confirmation: true` back fails
"never demands confirmation, with or without an address" with
`expected true to be false`, and nothing else.
164 team tests, 40 SDK tests, typecheck clean.
Per-account billing needs "how many accounts is this team getting the
benefit of", and neither existing count answers it. `countSeats` includes
suspended seats, because it bounds the seat cap and a suspended seat still
holds its username. `countPayers` counts the owner. Billing off `countSeats`
overcharges for suspended accounts, contradicting what the admin console
tells the owner: "0 suspended accounts cost nothing per account."
So this is a third, separate count rather than a change to either — the cap
must keep counting suspended seats.
An unactivated seat is deliberately still counted: it holds a temporary
password, not a suspension, and it is paid for. That is why the filter is
narrower than `listDirectory`'s, which also excludes
`requires_password_change`.
Falsified: dropping the suspended clause fails exactly one test
("drops a suspended seat from the active count but not from the cap",
expected 3 to be 2) and leaves the other 34 green.
OpenAI shuts the Sora Videos API down on 2026-09-24 and sora-2 was the
default txt2vid model, so the default moves to Veo 3.1 Lite on Gemini
and the OpenAI video provider goes. While there, the video catalogs are
brought in line with what each vendor serves today, the request options
are unified across providers, and the txt2vid docs are rewritten.
- driver: default provider gemini-video-generation with
veo-3.1-lite-generate-preview; a request under the generic `ai-video`
driver name lands on the default instead of the first-registered
provider; `WIDTHxHEIGHT` sizes map onto tier catalogs by the shorter
side and fill width/height
- openai video provider, the `openai-video-generation` alias, its
config template and migration entries, and Together's openai/sora-2*
rows removed
- gemini: Veo 3.1 Fast rates 10/12/30 cents per second for
720p/1080p/4K, Veo 3.1 Lite accepts reference images, URL image
inputs are fetched server-side through the SSRF-guarded fetch
- together: drop nine models retired upstream, add eighteen from the
live listing; per-second models are estimated from the catalog rate,
clamped to remaining credit and billed at the cost Together reports
on the job; tier-sized models take resolution/ratio;
input_reference/last_frame map onto keyframes; generate_audio is
forwarded
- byteplus: Seedance 2.5 (dreamina-seedance-2-5-260628) with per-model
reference-image caps
- util/imageInput: string-level image helpers shared by the image and
video drivers; ai-image/inputImage re-exports them unchanged
- puter.js types: provider and generate_audio options; docs: txt2vid
page rewritten with per-provider model tables, unified options and
four new playground examples
Known follow-up: Veo returns a key-protected Google file URL, so the
default clip cannot be played directly by a browser until the provider
fetches it server-side.
Co-authored-by: Claude Fable 5.1 <[email protected]>
When the chat fallback chain is exhausted, the driver already records
each attempt (model, provider, status, code, message, timeout) in the
error's `fields.attempts`, but the alarm keyed on the classified message
alone and the alarm client printed the error at inspect depth 2, so the
log and Slack line read `internal_error:All providers failed` with
nothing about which providers failed or why. Deduped repeats printed
only a count.
- The HTTP alarm gate now attaches an HttpError's `fields` to the alarm
under a single `details` key. One key can't shadow the gate's own
request fields, and a repeat from another thrower on a shared id
replaces it instead of merging into it.
- The chat driver logs one warn line per exhausted chain with the
completion id, the resolved route, the classified code and the
attempts as JSON, so every occurrence is greppable by trace even when
the alarm dedupes it. Chains marked `noAlarm` don't log.
- Docs: `fields` reaches both the client and the alarm, so it has to be
safe to show the caller.
Co-authored-by: Claude Fable 5.1 <[email protected]>
Members can already enumerate each other: `/teams/:uid/members` needs a user
actor and nothing more. The only thing this adds is admitting an app actor to
the same names, so an app can offer colleagues without the member driving it.
That is the whole risk, so it is off until the team owner turns it on.
`group.directory_enabled` defaults to 0, and a team that has not opted in
answers 404 rather than 403 -- whether a team has this on is not something an
app should be able to probe for either.
Three things bound what an app sees. The membership tested is always the
person's, never the app's, so an app installed by a member of one team can
never read another's. The page carries username and uuid and nothing else --
no email, activation state, usage or role. And suspended accounts and ones
that never took up their credential are left out, since offering someone who
cannot sign in is noise and their existence is not this list's to disclose.
Activation is the forced-change flag clearing, not the password existing: a
provisioned seat holds its temporary password from birth, so testing
`password IS NOT NULL` would have leaked exactly the accounts meant to be
excluded. A test covers that distinction.
Turning the directory on or off writes an audit row, because it changes who
can read the member list and that is not something a team should be able to
alter silently. Setting it to the value it already has records nothing.
The toggle lives in TabTeams, and turning it on asks for confirmation while
turning it off does not -- one grants access, the other only takes it away.
Closes PUT-1736.
* more recipes
* addition
* final
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* styling fix
---------
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
Two places a team becomes visible to a person rather than an API: the
Dashboard tab that administers it, and the share dialog that shares with it.
Squashed because they are one change to a reviewer. Both are the first GUI
consumers of `puter.teams`, both add strings to the same `en.js`, and both had
to answer the same question -- what a team looks like to someone who has
never seen one. Splitting them would mean reviewing that answer twice and
resolving the same translation conflict twice.
TabTeams (PUT-1740)
Registered in `builtinTabs` after `TabFiles`, as a plain object with
`html()` and `init($el_window)` like every other tab. The member table
carries the operations the API allows and nothing it does not: provision,
resend an activation, disable, restore, delete.
Deleting asks for confirmation naming the account, because the API deletes
on a single call -- PUT-1732 places the reversible step at disable, not in
front of the request, so the client is where a confirmation belongs.
The wording says plainly that disabling stops the per-account charge and
keeps the storage one, and that deleting is the only thing that ends it.
This is the one place a person decides between the two, so leaving them to
infer the difference costs them money.
Rendering and the billing arithmetic are pure functions in
`teamsConsole.js`, with tests beside them; the tab file is the DOM.
Share dialog (PUT-1762)
`UIWindowShare` gains the teams the caller owns as recipients. A
team is one entry in the list, not its members expanded -- sharing
reaches every member, and the per-person wording would understate what the
grant does.
`shareWorkspaces.js` holds the resolution and the deduplication, so the
dialog does not gain a second source of truth about who a recipient is.
Closes PUT-1740 and PUT-1762.
Team administration reaches the backend through the `/teams` routes
rather than a driver interface, because the gates it needs are route-level:
a user actor, a verified account, and a dual-window rate limit.
The module follows `apps/` and `perms/` in layout -- one file per method,
a thin `index.js`, a JSDoc-only `types.js`, and the `METHODS` rebinding so a
destructured method keeps its `this`. It does not follow `perms/lib/req.js`:
those endpoints resolve `{ error: true }` for backward compatibility, and
nothing here has callers to keep compatible, so this throws `PuterJSError`
with the backend's own code.
Every method takes a team `uid`. A handle is a mutable label that
deleting the team releases, so a stored handle can later resolve to a
different team.
The list methods offer the three forms `puter.apps.list()` does -- an array
by default, the page envelope under `cursor`/`includeTotal`, an async
iterator under `stream`. They refuse `offset`: these routes are keyset-only
and would otherwise return page one however far you asked to skip.
The surface covers the routes that exist today. Usage totals and member-email
correction have no backend route yet and are deliberately absent rather than
shipped as methods that 404. `deleteMember()` is here because the route it
needs lands in the commit below this one.
A disabled account persists indefinitely. Removing it is an explicit request,
never a timer, and it is refused on a live account with
`account_must_be_disabled_first` — which puts a reversible step in front of the
only irreversible operation in the feature.
The audit row is written before `cascadeDelete` runs. The FKs are ON DELETE SET
NULL and the `_keep` columns carry the identifiers, so the record of what was
done survives the account it names.
No second billing emit here: `cascadeDelete` already captures the seat and
fires `team.account.deleted` through UserAccountService, and emitting again
would close the storage charge twice. Disabling closed the per-account charge;
this closes the storage one, and it is the only thing that does.
There is no restore window, and none was wanted: the reversible step already
exists earlier at disable, a disabled account costs only the bytes it holds so
nothing pressures a hasty delete, and a restore promise means retaining data
the team explicitly asked to be rid of.
Published in rate-limits-and-quotas.md alongside the team-deletion note,
since the two are easy to confuse and only one of them frees a seat.
Closes PUT-1732.
Two halves of the same question -- what did the team do to me, and how do
I find out. One is pull, the other push.
The activity view (PUT-1746) was already user-scoped and already 404'd a
non-member; what was missing is the load-bearing half. A member is told a reset
happened, but a reset only matters alongside who signed in afterwards, so
`SessionStore.listSignIns` merges their own sign-ins into the same stream,
newest first, with a per-stream cursor. Without that row the audit says a
credential was issued and never says whether it was used.
The notices (PUT-1733) cover the two things a member cannot discover for
themselves: their account being disabled, and their team being closed.
Deliberately one each -- closing a team disables every account in it, so
sending both would tell one person twice about one event. Both say plainly that
nothing was deleted; the accounts persist, suspended, holding their files.
Squashed because they are one change to a reviewer: same audience, same
purpose, seven files, overlapping only in TeamService. Neither touches shared
platform code.
`user.requires_password_change` shipped with the team columns but nothing
enforced it and nothing ever cleared it, so a provisioned seat kept its
administrator-issued password indefinitely and `reissueCredential`'s
"already activated" 409 was unreachable.
Adds the fourth clause to `assertVerifiedAccount`, the only place a
verification gate may live -- WebDAV builds its own actor and calls that
function directly, so a second implementation would bypass it the way the
phone and card gates once were bypassed.
A gate that refuses everything also refuses the endpoint that clears it,
so `/user-protected/change-password` opts out with `allowUnconfirmed`.
That widens the route: an account pending email, phone or card
verification can now change its password, which it could not before. The
caller is authenticated and proves the current password, so this is
benign, but it is a behaviour change to a shared route.
Also here, because the gate is worthless without them:
- change-password and the recovery-token path clear the flag, and record
an `activate` entry when the account is a seat.
- Reset takes a live account back with a fresh credential, capped at 20
per day and audited as `reset_member_password` with no credential in
the row. Re-issue is audited the same way; it stays closed once a seat
has chosen its own password.
- An issued credential expires after 24h (new `temp_password_expires_at`
column, three dialects) and login refuses it after that, so an unused
reset dies instead of becoming a standing credential.
- 2FA is untouched by a reset, so a reset alone is not takeover.
`notifyShared` keyed every map off `ResolvedShare.holderId`. A team share
has no individual holder -- the grant is one row against the group and
`holder_user_id` is NULL -- so it was skipped everywhere and the call returned
having told nobody. Nothing errored: the share was created, resolved and listed
correctly. The failure mode was silence.
`#recipientsOf` now expands a team share to its live members at
announcement time, so the grant stays one row and only the telling fans out.
`#announce` and `#emailHolder` are both inside the per-recipient loop, so
members get the in-app notification and the email digest.
Bounded by `NOTIFY_FANOUT_CAP`, which logs when it bites rather than truncating
silently -- a shortened fan-out otherwise reads as "everyone knows". The
existing per-recipient budgets absorb the volume from there.
Wording is unchanged: "shared N items with you", not the team name.
A member who joins later resolves the grant through the scan but is not
retroactively told; announcements describe a moment, not a state.
Covers PUT-1726, PUT-1727 and PUT-1729. Together because a recipient without
the listing work produces a share that is created correctly, resolves
correctly, and never appears in "Shared with me" — a state nobody would ship.
The recipient. `ShareRecipient` gains `team` (uid) and `teamHandle`, resolved
before the email and username branches and never falling through to them.
Passing both is an error rather than a precedence rule, so a call site always
shows which was chosen: handles are released on soft delete and can be
reclaimed by an unrelated team, and a scripted share to a handle would
silently retarget. There is no bare-string spelling, since that would change
how existing strings are interpreted.
ACLService.setUserGroup mirrors setUserUser: same read-modify-write, same
one-mode-per-node rule, under a node lock keyed on the group.
One grant against the team, not one per member, so membership changes
apply without touching the grant and a share spends one unit of the daily
quota however many members there are. A member who joins afterwards gets
access, which is asserted.
The index row carries `holder_group_id` and leaves `holder_user_id` NULL, so
`0077`'s group index constrains it rather than the user-holder one.
Listing. `listByHolder` and `countByHolder` union the caller's teams into
the same keyset page — `ORDER BY id` still holds — and `#grantEvidence` gains
group grants as a third source. Without that third source the share is
filtered out of every listing as dead: nothing errors, the share simply is not
there, which is the one place a user would look for it.
Unsharing revokes the grant as well as deleting the index row. Deleting the
row alone would hide the share while leaving every member holding real access.
Closes PUT-1726, PUT-1727 and PUT-1729.
Two tickets, together because the fixture has no behaviour of its own — the
grant tests are its first real use, and "a grant to team A must not
resolve for B's members" is exactly a two-team assertion.
PUT-1719. Every query resolving team-scoped data has to take the
team as a parameter rather than infer it. One that forgets returns the
right rows against a database holding a single team, so a one-team
fixture does not give weaker coverage — it gives false confidence.
The fixture provides two teams, each with its own master and two
activated seats, plus a user in neither. Each team having its own master
is also what the shipped `max_teams_per_user: 1` requires, so it runs
against the real cap rather than lifting it the way the existing team suites
have to. Seats are activated before use: provisioning leaves
`requires_email_confirmation` set and `requireVerified` rejects them outright,
so an unactivated seat cannot call anything and every authorization assertion
built on one would be vacuous.
PUT-1725. The write half of group grants; the read half already worked, since
`#scanUserGroup` joins `jct_user_group` itself and resolves for whoever is a
member at scan time.
PermissionStore resolveGroupId, listGroupMemberUuids,
upsertUserGroupPerm, deleteUserGroupPerm,
auditUserGroupPerm
PermissionService grantUserGroupPermission, revokeUserGroupPermission
Both rewrite the permission first, so `fs:/path:mode` collapses to
`fs:<uuid>:mode` and a revoke names the same string the grant wrote; both gate
on `canManagePermission`; both audit into the existing
`audit_user_to_group_permissions`.
The delete is scoped to the issuer, so one issuer's revoke cannot drop
another's identical grant — the PK is (user_id, group_id, permission) and
user_id is the issuer.
Cache invalidation goes through `bumpCacheGenerations` with every member uuid
at once. That already announces to peer regions in a single event, so the
fan-out costs one broadcast rather than one per member.
There is no flat-KV equivalent for group grants, so unlike the user-to-user
path there is no second write to keep consistent and no second invalidation
surface.
Closes PUT-1719 and PUT-1725.
Math.ceil(len * 3 / 4) over-counts by 1-2 bytes on padded payloads, so thumbnails at the size limit were wrongly rejected. Subtract padding like ai dataUriByteLength.
A seat is a real Puter account: it takes a name from the global username pool
and gets a home directory. Nothing charges for one — that is prod's job — so
until it does, the only bound on creation is the request rate limit, which
bounds the rate and not the total.
max_teams_per_user default 1
max_seats_per_team default 50
Ordering is the substance of both checks. The team cap is tested before
the handle, so a capped user is told they are capped rather than that the name
they picked was unusable. The seat cap is tested before any account state
exists, so a refused provision does not burn a global username.
Soft-deleted teams do not count toward the owner's cap, so deleting frees
the slot — which does mean create, provision, delete, repeat still consumes
usernames over time, bounded by the daily rate limit. The caps raise the cost
and make the cycle audited; they do not close it.
Lowering the seat limit blocks new provisioning and disables nobody.
Both limits are published in rate-limits-and-quotas.md, and both keys are
documented in config.template.jsonc and config.default.json.
Closes PUT-1758.
A seat that exhausts its allowance is refused and cannot fix it itself — only
the team owner can add capacity. Something has to tell the owner, and that
something lives in prod, so OSS's job is to say when it happened.
`MeteringService` emits `metering.credit-state` from `rememberRemainingCredits`,
the single point where the verdict is computed, at 90% of the allowance and
again on exhaustion.
Emitted on a transition, never per request. A blocked account keeps trying and
every retry recomputes the verdict, so without that a retry loop would announce
hundreds of times. The state is tracked per uuid in process, under the same FIFO
bound as the credit cache, and dropped in `#dropCachedCredits` — so added
capacity re-arms the alert for the rest of the month.
The dedup that turns this into exactly one notice per member per month belongs
with whoever sends the mail, and needs a cross-region marker rather than a
per-cluster one.
Part of PUT-1750; the notification half is prod's.
The charge lives outside this repo, the way the marketplace extension cancels
Stripe subscriptions off `user.delete`. This is the trigger, and it is the
whole of what OSS owes billing.
team.account.created a seat exists and can be used
team.account.disabled it stopped, and still holds its bytes
team.account.enabled it resumed
team.account.deleted it is gone
team.deleted the team is gone; its accounts are not
Each carries the team uid, the affected account, and the owner's
`stripe_customer_id`. That column ships in the mysql and postgres schemas but
not sqlite, so the read is guarded and degrades to null, as `cascadeDelete`
already does.
Deleting a team emits one `team.account.disabled` per seat plus the
team event, rather than one bulk event: the accounts persist, suspended,
holding their files and their usernames. Deleting a team is not a way to
stop paying for the accounts in it.
`team.account.deleted` is captured before the row is deleted.
`jct_user_group.user_id` is ON DELETE CASCADE, so by the time a listener on
`user.delete` runs, nothing can say which team paid for the account.
`getOrgSeat` deliberately admits soft-deleted teams: their accounts still
exist, so the charge is still running.
Closes PUT-1712.
`addMember` refuses to turn an account that already has a password into a
team seat. No service path did this — `provisionAccount` always creates —
but the store permitted it, and the design rules out existing accounts joining
a team.
Provisioning passes the guard because it admits the account before setting its
temporary password.
There is no bypass parameter. Both HTTP suites now provision a real seat and
authenticate as it, using the same token-minting the harness uses for
`POST /login`. That surfaced something worth knowing: an unactivated seat
cannot call the API at all. Provisioning leaves `requires_email_confirmation`
set and `requireVerified` rejects it, so the suites activate the seat first —
which is the state a member is actually in when making requests.
`listMembers` and `getMembership` also return `u.uuid`, which the billing
events need in order to name the account without a second lookup.
`postMessage(message, transfer)` (or `{ transfer }`) moves ArrayBuffers,
MessagePorts, streams and the rest to the target app instead of copying
them. The second argument is optional, so existing callers are unchanged.
The transfer list rides in the message body as well as the real transfer
list: structured clone's memory map keeps those objects identical to the
ones inside `contents`, which is how the desktop picks them out mid-relay
and keeps transferring them onward rather than leaving copies behind. Both
`messageToApp` paths carry it — the direct iframe relay and the connection
path that `launchApp()` between apps actually uses.
The desktop forwards the list as-is and lets postMessage judge it. A list
that arrived through the SDK was already validated by the browser on the
first hop, and validating again here would mean an allowlist of
transferable types that silently downgrades an unrecognised one to a copy.
A bad list only reaches us from an app that hand-wrote the envelope; that
throws without detaching anything, and is caught so it cannot escape
`ipc_listener` as an unhandled rejection.
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
The SDK shorthand sends `{ image_url: { url } }` with no type. Claude
forwarded it untouched (Anthropic: "content.1.type: Field required"),
the OpenAI/Azure Responses providers sent a Chat Completions part the
Responses API rejects, and Mistral emitted snake_case `image_url` where
its SDK validates `imageUrl`. All three only appeared to work because
the fallback loop re-served them through OpenRouter.
- utils/mediaParts: canonicalise every inbound media part (untyped
shorthand, bare string URLs, Responses input_image, Anthropic image
blocks, Gemini inline_data) to the Chat Completions form in the
driver, so providers translate from one shape
- Claude → Anthropic image blocks (url / base64 sources), copy-on-write
- Responses processor → input_image with a string URL and detail, and
copies messages instead of mutating the caller's objects
- Mistral → camelCase imageUrl; the test that asserted the old shape
is corrected
- driver: 400 up front when the catalog says the model has no image or
video input; resolve puter_path parts per attempt for providers
without their own upload path (Claude keeps the Files API)
- move the Moonshot http→data-URL inliner to utils/inlineImages and
apply it to Grok-via-Azure and Gemini, whose upstreams cannot fetch
http image URLs
Fixes#3409
Co-Authored-By: Claude Fable 5.1 <[email protected]>
* fix(events): rename carries from, one retry on deploy-timeout, forward-path counters
- FSService.rename passes the pre-rename path so a folder subscription
sees op move with from, like a real move does
- deploy-timeout from the dispatcher gets one retry with the deployed
header and no second upload (ALREADY_DEPLOYED_MISS_REASONS)
- OTel counters events.forward.sent/received and events.single.attempt
- cross-app KV subscribe error hints at the three-segment parse
- docs: lease is 60 s, kv prefix example is fully qualified, move covers
rename
* feat(events): forward session subscriptions across regions, fast bumps, worker session cleanup
- session (onLocal) subscriptions now receive writes committed in other
regions: a transition-maintained remote-watch index (ev:sc / ev:rw),
watch/event forward items, replay through dispatchForwarded against
session rows only; events.forwardSession=false is the kill switch
- subscription and presence generation bumps also ride the addressed
forward channel (kind bump) so a peer sees a new durable row within
a queue window; the webhook fan stays as backstop
- workers.destroy revokes every holder's events:handlers session; app
deletion reaps the app's rows, backlog and handlers and revokes the
sessions; an hourly sweep revokes sessions whose app is gone
- docs: cross-region latency, per-region caps footnote, session
lifecycle
- puter.email.sendTransactional is the new name; send stays as a
deprecated alias with the same arguments and result
- fileInput: openFileInputStream / resolveFileInputEntry expose the
ACL-checked FS read as a stream; loadFileInput wraps them
- EmailAttachment accepts a `path` the transport streams on its own
txt2vid rejects missing prompts client-side with prompt_required, but txt2img sent the request to the backend. Add the same guard before the driver call.
* Add resilient PDF thumbnails to GUI uploads
* Keep GUI image thumbnails working with SDKs lacking the callback context
The desktop loads puter.js from js.puter.com by default, and the SDK
there predates the thumbnail callback context, so passing the PDF
generator made every image upload lose its thumbnail until the SDK
deploys. Fall back to the SDK's bundled image generator whenever the
running SDK passes no usable context, and cover both paths in the unit
and browser tests.
* Ignore preparation failures that land after an upload is cancelled
Cancelling during preparation already rejects the upload and fires the
abort callback. If the step that was in flight then fails, such as a
dropped directory that cannot be read, the error callback also fired and
the GUI showed an upload error for an upload the user had just
cancelled. Skip error reporting once preparation has been aborted.
* Give each PDF thumbnail worker four seconds
The per-PDF budget covers downloading PDF.js as well as rendering, and
the first PDF of a session on a slower connection ran out of time
before its assets had even loaded. Four seconds fits that first load on
ordinary connections while staying under the five-second batch cap, so
one stuck PDF still leaves the rest of the batch a chance.
The dispatcher's rehydrate callback reaches whichever backend answers the
API's public hostname. A backend with the runtime flag on that is not behind
that hostname, or the only one in the fleet with it on, could never get its
scripts deployed that way — the callback answered "disabled". The invoking
backend already knows the app and script, so on a dispatcher miss it deploys
the set itself and retries once, telling the dispatcher to skip its callback
and negative cache. The callback stays the path for evicted scripts.
Google shut down imagen-4.0-fast/standard/ultra in the Gemini API on
2026-08-17; live calls now return 404 "not found ... or is not supported
for predict". Drop the three entries, the generateImages code path that
only they used, and their tests; the integration test moves to
gemini-2.5-flash-image.
Moonshot's live /models listing and the Kimi pricing docs now carry only
kimi-k3, kimi-k2.7-code(-highspeed) and kimi-k2.6. Drop kimi-k2.5 and the
whole moonshot-v1-* family and repoint the unit and integration tests at
current models. kimi-k2.5 still resolves through OpenRouter.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Skipping the whole matrix job via a job-level `if` collapses it to a
single check with the unevaluated name template ("test (\${{
matrix.artifact }})") instead of expanding to "test (base)"/"test (pr)",
since there's no matrix context to fill in when the job never runs. That
check never matches a required-status-check pinned to "test (pr)", so
PRs that skip backend/puterjs testing block forever waiting on a check
that will never be reported. Gate the steps instead so the matrix always
expands with stable names, doing no real work when irrelevant.
* fix: withdrawing background consent revokes the app's events session
A background handler runs as a worker session for the subscriber and app.
Revoking `events:background` or uninstalling the app suspended the
subscriptions but left that session valid, so a token a handler had copied
out kept working until the user found the row in the sessions list. The
revocation settle now revokes the session too; the next consented delivery
mints a fresh one.
* fix: cleanup docs
- CODEOWNERS: default owners @Salazareo @ProgrammerIn-wonderland @jelveh
@jfcastro92, plus @reynaldichernando for src/docs.
- dependabot.yml: ignore semver-minor/major npm updates, patch only.
- backend-tests.yaml / puterjs-tests.yaml: trigger unconditionally and gate
the real work behind a dorny/paths-filter job instead of a workflow-level
path filter, so the checks always report (skipped when irrelevant) and
can be marked required. Also pins matrix job names to the artifact label
instead of the branch ref, which previously made the check name change
per PR and unusable as a required check.
* fix: harden events dispatch, single delivery and KV share handles
Dispatch: a filtered subscription used the anchor path stored at subscribe
time, so renaming or moving the anchor folder silently ended its deliveries;
dispatch now resolves the anchor's live path from the event's own ancestor
chain. A move out of a watched folder now reaches that folder's subscribers,
with `from` only for rows that watched the source side. Gap markers are
authorized like deliveries and coalesced per subscription and subject instead
of fanning per lost event. Session subscriptions: the per-socket cap decides
on the write, not before it; an orphaned watched-set token heals on refresh;
durable rows keep their watch window when a session subscribe touches the
same keys. `self` is false when the acting user is unknown.
Single delivery: a subscription in backoff or suspended with a backlog pinned
the sweeper's head and starved everyone behind it — the sweep now defers it.
Only a settled handler run bills a delivery. A socket-only account row no
longer wedges after two attempts nobody received. The lease is twice the
handler timeout; remote candidates have their own attempt counter; the region
depth reconcile runs once a minute region-wide with a bounded scan.
KV share handles: a grantee no longer sees the owner's namespace and absolute
prefix on the subscribe answer or listing, nor in the delivery token; revoking
a wider handle retires the handles it covers; minting the same handle twice
returns the existing one, after the delegation check; a row whose event
cannot be re-based onto its handle is dropped rather than delivered raw.
* fix: presence survives replication, long sessions and region churn
One presence item per (user, app) with per-region map fields lost a region
whenever two regions joined inside the replication window, and nothing ever
put it back. Presence is now one item per (user, app, region): each region
writes only its own, a leave or repair retires it conditionally on its own
write stamp, and a read is a prefix query. Items carry a 48 h ttl refreshed by
a claim-gated write off the existing socket renew path, at most once per
12 h, so a tab that stays connected keeps its region in the row. A region
that answered "no socket" or completed a leave releases a shared pin, so a
reconnect on another node rejoins and a flapping client cannot force a
replicated write per cycle. Cached rows expire after a minute; unaddressable
region names are filtered and pruned; relayed acks settle under a bounded
concurrency; the forward queue is bounded in bytes as well as items.
* feat: indexes for the event_subscriptions hot queries
Handler publish, remove and listing, and the hourly expiry and suspension
sweeps, all scanned `event_subscriptions`. Adds (app_uid, handler_name),
(expires_at) and (suspended_at, id), guarded on every engine. Existing
migrations: the postgres widens are now guarded so a boot does not take an
exclusive lock for a no-op, the kv_share_handles grantee FK gets an index,
the sqlite notification rebuild is transactional and idempotent.
* fix: notification writes go through the registry
The driver's `create` bypassed the type registry, producing uncatalogued
rows with no size bound; it now requires a registered type, caps the payload,
and answers 400 rather than 500 for a bad one. `mark_acknowledged` emits the
ack other tabs listen for, and only when a row was actually changed.
* fix: the handler scanner, unsubscribe, and the in-tab handler environment
The free-variable scanner skipped arrows inside a declaration's initializer,
so `const ids = event.items.map(x => x.id)` was refused, and treated a name
after a comma in a nested initializer as bound, so a real free variable slipped
through to fail on first delivery. `unsubscribe()` now drops the durable
routing entry so the events socket can close. A broadcast handler running in
the tab gets `user` and `fetch` like the worker gives it. `single` without
a handler name is refused before the round trip.
* docs: events limits, error codes and the background-workers section
Retention is deployment-configured rather than a fixed 14 days, and the
template no longer ships it armed. Documents `events_terminal`, the two
per-event gap reasons, the subject length and listing caps, the `from` field
on moves, and the handle-relative anchor. The sessions manager hides the
background-workers section when the server has none to show.
* feat: a background handler acts as the app does for its user
A handler's `user` was a five-minute access token scoped to the subscription's
`list` grant, which could stat the changed file but not read it, and could
not reach the app's KV or AppData — so an app told that a file was written
could do nothing with it. It now runs with the same authority the app has for
that user in a tab: an app-under-user worker session, one row per (user, app)
named `events:handlers`, visible and revocable in the sessions list. The
`events:background` consent is what authorizes running it unattended, and is
re-checked before every mint.
The wider token exposed two things: puter.js opens a filesystem socket the
moment it has a token, which would have parked the isolate in the app's own
delivery room and steered deliveries at it; the events client now opts out of
sockets (and the per-open bookkeeping) before construction, and is memoized
per token in the isolate. And four filesystem operations assumed a socket
exists; they no longer do.
* feat: bake published handlers into a generated events worker
* feat: deploy and address the per-app events worker behind a flag
* test: single delivery end to end through a real local worker
* feat: events workers run their own runtime, in their own namespace
An events worker was being deployed as an ordinary worker: default dispatch
namespace, a `subdomains` row, the router preamble, and an app-scoped worker
token baked in. The public dispatcher resolves any script in that namespace
straight off the hostname, so the worker answered at `<name>.puter.work`, and
the only thing in front of it was an unguessable name plus a check that a
`puter-auth` header was present — which the router never validates. Anyone who
learned the hostname could run an app's handlers with a body of their choosing,
in an isolate holding the owner's token as `me`.
Instead:
- Handlers run on their own runtime (`src/worker/src/events-runtime.js`), which
provides no `router` and no `me`, owns the single invoke route, and hands a
handler only `{ event, ctx, user, fetch, ack }`. `user` is built from the
invocation's delivery token, so a handler acts as the subscriber whose
delivery it is and nothing wider. The preamble build emits one bundle per
runtime; the shared half of the template is now included by both.
- The deploy target carries the runtime to prepend, the source to deploy, and
whether to mint a worker token at all, so an events worker deploys into the
`events` dispatch namespace from generated source with no token binding, no
`subdomains` row, and no claim on the owner's worker quota or worker list.
- An invocation carries a key derived from the deployment secret and the script
name, bound as a secret and checked in constant time inside the isolate,
which reads it once and drops it before handler code runs.
- Scripts are named after the handler set they contain, so publishing writes
rows and deploys nothing: a set is deployed the first time a delivery needs
it, and a changed set is a new script rather than an overwrite of a running
one. Publish responses keep the shape they had before the runtime existed.
- Invocations reach a worker only through the events dispatcher, which has no
zone route and requires the internal secret; the backend's own deploy path is
the rehydrate route the dispatcher calls on a namespace miss. Locally there is
no dispatcher, so the controller hands the service an in-process transport
that deploys on miss itself.
The SDK stops allowlisting `puter` as a handler global — a handler that reaches
for an ambient SDK is now refused at publish time, naming `user` instead, rather
than passing the scan and failing on its first delivery.
Requires `events.workerNamespace`, `events.dispatcherUrl` and
`events.internalSecret`; without them nothing is addressable and background
deliveries stay retriable, as they did with the runtime off.
* fix: a handler's delivery token gets through the read routes
An events handler acts as the subscriber through the access token its
invocation carried, but every FS read route refused scoped access tokens
outright, so `user.fs.stat(event.path)` — the design's own example — answered
403 inside the worker. The read-side routes now admit them; the ACL each
handler already runs intersects the token's grant with its issuer's, which is
the check that keeps a token to what it was minted for. The end-to-end suite
asserts the stat from inside the isolate.
* fix: shorthand-method handlers publish as functions
`{ ingest({ event }) { … } }` stringifies without the `function` keyword, so
its source is not an expression and the events worker baked it as a broken
stub — every delivery a retriable 500 until the subscription suspended, with
nothing at publish time to say why. The SDK now gives a shorthand method the
keyword before hashing and sending; getters, setters and computed names are
left for the server-side check to refuse.
* feat: an app's events worker is listable and destroyable
An app with published handlers has an events worker, and hosted deployments
bill it monthly per app, so its owner needs to see it and be able to take it
down. The core announces the lifecycle on the bus — `events.worker.create`
when an app's first handler is published, `events.worker.destroy` when its last
one goes — with the owner as the actor, so pricing can plug in from outside.
`GET /events/workers` lists the caller's workers (paginated, with the script
each set deploys as) and `POST /events/workers/destroy` removes every handler
of an app under the same owner scoping as the handler routes, suspending the
subscriptions bound to them. `puter.events.workers.list/destroy` in the SDK,
a docs page, and a 5 MB cap on an app's combined handler source
(`events_worker_too_large`) so a set that publishes can always deploy.
* fix: harden the events worker runtime for production
- A 4xx is terminal only when it carries the handled marker the runtime (and
the dispatcher) stamp on every answer that came from a script; an unmarked
4xx — an edge 404 for a wrong dispatcher hostname, a WAF page — stays
retriable and is logged, once per script per minute, with the runtime's
reason header.
- Script names are scoped to this backend's exposed API origin, so two
backends sharing a namespace never resolve one script with the wrong
endpoint binding or key. Shape unchanged.
- Each handler is validated in the exact context it is emitted into and the
whole generated file is compiled once; a source that would break the script
marks every handler broken instead of deploying a SyntaxError.
- Locally, events scripts live under their own registry key: the public local
worker host cannot reach them and an ordinary worker cannot take their name.
- A suspended or deleted app owner stops invocations; deploys are throttled
per app per hour; in-flight deploys are keyed by app and script; the
upstream deploy call times out; the generated source is size-capped with a
margin over the publish cap; boot fails when the runtime is on but its
preamble is not built. Byte-length secret compare, appUid shape check,
dispatcher URL prefix preserved, wider connection pool.
* feat: background workers are listed in the sessions manager
A user paying for an app's events worker needs somewhere to see it and take it
down. The sessions manager gets a section listing the apps that run event
handlers in the background, with a Destroy action that removes their published
handlers.
* feat(gui): let users reposition and zoom a new profile picture
Picking a photo in the dashboard's Account tab used to stretch the whole
image into a 150x150 square, so anything that was not already square came
out distorted and off-center. The pick now opens an adjust step: a
dashboard-style modal (centered card on desktop, bottom sheet on phones)
where the user drags to reposition and zooms with the slider, pinch, or
wheel before saving. The saved result is the same 150x150 PNG as before.
Geometry lives in profilePictureCrop.js with unit tests; the modal owns the
DOM and pointer handling.
* fix(gui): stop double-encoding the crop modal's hint and frame label
i18n() already HTML-encodes its output, so wrapping it in html_encode()
again turned any apostrophe or ampersand in a translation into a literal
"'" / "&" on screen. Also puts the new profile_picture_* keys
in alphabetical order.
* fix(gui): let the crop frame take focus on click so arrow keys work after a drag
pointerdown's preventDefault() also cancels the click-to-focus that a
mousedown would have done, so after dragging the photo the arrow keys and
+/- went to the dialog container and did nothing. The frame now focuses
itself on pointerdown. Focus that arrives by pointer draws no ring; the
first key press lifts that so keyboard users still see where they are.
Also ignores secondary mouse buttons and treats a lost pointer capture as
a release so a pointer can't stay stuck in the gesture map.
* fix(gui): return focus to the avatar when the crop modal closes
The modal remembered document.activeElement to restore focus later, but
at that moment focus sits inside the file picker, which closes right
after -- so on Save, Cancel or Escape focus fell to <body>. The Account
tab now names its avatar as the place focus returns to, and the avatar
becomes a real button (role, tabindex, label, Enter/Space) so it can
hold that focus and be reached from the keyboard at all.
* fix(gui): announce the crop zoom as a magnification, not a 0-100 slider value
Screen readers read the range input's raw value, which maps to nothing a
user can picture. aria-valuetext now carries the zoom factor (1.0x-4.0x)
and follows every zoom source: slider, buttons, keys, wheel, pinch.
* fix(ai): make chat fallback reach streamed Claude calls and rank Azure explicitly
- ClaudeProvider opens the upstream stream and awaits its connection
before returning the populator, so an overloaded or rate-limited route
throws from complete() and reaches the driver's fallback loop instead
of surfacing as an error frame on a 200
- the OpenAI-compatible chat and completions routes only pin a provider
when the caller sent one, so they get the same preferred healthy route
puter.js callers do and unhealthy-route skipping applies to their
first attempt
- Azure is ranked ahead of the vendors it fronts by an explicit tier in
modelRouting rather than a price tie plus registration order
- drop Together's synthetic always-failing model-fallback-test-1 entry
- test that a 4xx leaves a route in rotation while a 503 marks it
Co-Authored-By: Claude Fable 5.1 <[email protected]>
* fix(ai): surface swallowed Claude stream errors, keep compat-route defaults
Review follow-ups on the fallback work.
- The pre-created event iterator only receives an error if a reader is
already waiting on it, so a failure landing between the connect and the
populator's first pull ended the stream cleanly — truncated content
billed and reported as a success. Rethrow when the stream is errored.
- A refused stream deleted its Anthropic uploads but left the caller's
message parts pointing at those file ids, so the fallback route was
handed handles it cannot resolve. processPuterPathUploads now returns a
restore() that both failure paths call.
- The OpenAI-compat routes keep pinning OpenAI when the caller sends no
model at all, so the default model stays put instead of moving to
Azure's.
- Say why /openai/v1/responses and /anthropic/v1/messages stay pinned:
each translates one provider's native shape by hand.
- PREFERRED_PROVIDERS is unexported and its doc now states the rank is
unconditional; the duplicated hidden-model list is one constant.
Co-Authored-By: Claude Opus 5 <[email protected]>
* fix(ai): undo the puter_path rewrite by field instead of snapshotting the part
Copying the content part kept whatever the caller sent on it — a large
inline `source` or `text` alongside `puter_path` — reachable until the
request ended, where overwriting the field used to make it garbage right
away. The only fields this function writes are `type`/`source` on success
and `type`/`text` on failure, and the fallback uploader keys off
`puter_path` alone, so restore undoes those three by name.
Co-Authored-By: Claude Opus 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5.1 <[email protected]>
* Add fs commands to cli
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
---------
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
Widen the notif: match filter and fetch scope for a session's own
generic developer/app-user subscribe: today it pins ref to the
session's own uuid, so a row naming an app (handler-suspension
notices, app-bound worker deploys) never matches live and never
replays on reconnect, even though the audience predicate already
grants the holder every such row it owns. The predicate is the
authority and already reruns per row/page after the match, so
widening the filter to it (account is unaffected — it never names an
app) adds no exposure.
An actor holding an app reads the `app-user` rows naming that app, plus its
`developer` rows when the holder owns it. `account` rows reach no app, and a
slice an actor may not see comes back empty rather than refused. The audience
predicate becomes the enforced read path in the same change that lifts the
blanket app-actor 403, layered behind an audience/app_uid SQL scope; two-segment
`notif:` subjects expand server-side from the actor's own app, so an app can
never name another app's uid.
No feature flag: `audience` defaults to 'account', so every pre-registry row is
default-denied to app actors and the backfill can only narrow.
* feat: presence and cross-region event forwarding (PUT-1679)
* fix: fan cache bumps to sibling nodes and stop the forward shed cascading (PUT-1679)
`outer.events.generationBumped` and `outer.events.presenceBumped` rode
`outer.*`, which the broadcast service only webhooks to peer regions;
only `outer.pubsub.*` also fans over Redis to a region's other nodes.
Both caches are per-process maps with no expiry, so a bump landing on
one node left its siblings stale until that user's next transition.
Renamed onto `outer.pubsub.events.*`; the listeners already accept the
`from_outside` copy the Redis re-emit carries.
`PeerForwardQueue.push` called `onOverflow` synchronously and the
handler pushed markers straight back, each of which re-tripped the
bound and shed the next item: one item over a 5000 bound recursed ~2200
deep, threw a RangeError, and turned ~2200 queued deliveries into gap
markers. It also re-summed `bytes` over the whole queue per drop. The
handler now returns its markers and the queue appends them past the
bound check, sheds deliveries before markers, keeps one pending marker
per (peer, subscription), and subtracts bytes per dropped item.
`compileMatch` turned every `*` into an unbounded `[^/]*`, so a subject
like `fs:~/x/*a*a*a*a*a*a*a*a*a*a*z` tested against a 24-char filename
with no `z` — both named by the same subscriber — cost the regex engine
C(34,10) splits before failing: 1.0 s per event at ten stars, 3.7 s at
eleven, on the fs-write dispatch path, inside the 256-character cap.
With one `*` per segment the delimiters pin each star and a wrong split
dies in one step; the single `**` is the only choice point left, so the
worst allowed shape is O(depth × length): 0.4 ms at depth 60 of 200-char
segments. Every documented pattern (`*.png`, `**/build.log`, `**/*.png`,
`dir/**`, `report-?.csv`) stays valid; `*a*`, `a**b` and `**/x/**` are
refused with `invalid_subject_pattern`. The rule is stated where the
syntax is introduced, on the limits page, and in onLocal's error table.
App payloads carried only the /app-icon endpoint URL, which 302s to the
icons hosting subdomain. Networks that mangle that redirect render no icon
at all, and every icon load pays a round trip for the hop.
Ship the direct subdomain URL as `iconCdnUrl` alongside it (taskbar items,
installedApps, recent/recommended launch apps, suggested apps), and have the
GUI load that first with the endpoint URL as a one-shot retry - desktop
taskbar, start menu, dashboard app grid and recents. Only rows whose `icon`
column is already an http(s) URL get one: a data: column means the resize
pipeline has not written anything to the subdomain yet.
Also folds the four copies of the generated-size list into one exported
APP_ICON_SIZES.
Covers PUT-1708, PUT-1709 and PUT-1743.
Twelve routes, every one setting requireUserActor -- that option is what
installs requireAuthGate, requireVerifiedAccount and requireNonAccessTokenGate,
because server.ts derives `needsAuth` from the route options. Reads need it as
much as writes: without an auth option a route gets no suspension check and
admits access tokens, so a just-disabled member could still read the roster and
a scoped third-party token could read the audit log.
Authority is checked before anything observable. Validating the body first made
POST /members answer 400 before 403, and resolving :username first turned the
member routes into a global username-existence oracle.
Provisioning applies the same username and email rules as signup rather than
its own -- USERNAME_REGEX, USERNAME_MAX_LENGTH, RESERVED_USERNAMES and
validator.isEmail, now exported from AuthController. Without them a workspace
could mint accounts signup would refuse, claim unregistered reserved names, and
mail arbitrary unvalidated addresses.
Handle problems are 400 or 409 rather than a bare Error, which the server turns
into a 500 and a deduped critical alarm -- an uppercase handle should not page
on-call.
Disable drops sessions through SessionStore.removeByUuid rather than a raw
DELETE. The store invalidates every composite cache key; without that a
disabled member kept authenticating from cache for the session TTL, which is
exactly the "takes effect on the next request, not after a cache TTL" property
disable is supposed to have. Revoking also preserves last_ip/last_user_agent,
which the member-facing audit view reads.
Audit writes live in TeamService at the point of each action rather than in the
route, so a caller reaching the service directly cannot skip them, and the SQL
lives in TeamStore. Audit reads map internal user ids to usernames, and remain
readable by the owner after the workspace is soft-deleted -- otherwise the
delete_team entry was written and immediately unreachable.
teams_enabled gates route registration through an optional isEnabled() the
server honours, so with it off the paths do not exist rather than existing and
refusing. It does not gate DDL.
TeamIsolation.http.test.ts asserts the negative the feature rests on: the
workspace manages accounts and cannot read them, including through a
full-access token and after the member is disabled. It asserts outcomes rather
than the absence of an implicator.
Covers PUT-1705. The master account supplies { username, email }; the account
is created with no password, gets the default filesystem tree, joins with
org_owned = 1, and receives a one-shot activation link.
Activation reuses password recovery rather than new token machinery: the same
pass_recovery_token, the same one-hour purpose-scoped JWT, the same
/action/set-new-password link. No team_activation table, no new token type,
and no unauthenticated endpoint on the team surface. Activation state needs no
column either -- an unactivated account is one with no password.
Applies the same username and email rules as signup rather than its own:
USERNAME_REGEX, USERNAME_MAX_LENGTH, RESERVED_USERNAMES and validator.isEmail,
now exported from AuthController. Without them a workspace could mint accounts
signup would refuse -- the username becomes the /username home-directory
segment -- claim unregistered reserved names, and send activation mail to
arbitrary unvalidated addresses at the route's daily limit.
Usernames come from Puter's global pool, so a taken one is refused with free
alternatives rather than silently modified: a suffixed name would appear in
every share dialog that person ever sees, and they never agreed to it. The
check runs before any write, so a rejected provision leaves no orphaned user
row -- asserted by a test on the workspace's member count.
The new account carries requires_email_confirmation, since the address came
from the administrator rather than its holder.
Adds a team_account_activation email template stating what the workspace can
and cannot do -- including that it can reset the password, which the design
requires be said rather than only claiming files are private.
free_storage stamping and the billing event are phase 3.
Covers PUT-1704 and PUT-1707: creating a workspace, admitting the master
account, and the whole of offboarding.
`createWorkspace` admits the creator with org_owned = 0, which is what makes
the master pay for itself and stay an invalid target of every member route.
`checkOwnerInvariant` asserts the rule no dialect can express -- the owner is
a member with org_owned = 0 and the only such member -- and a test breaks it
deliberately, since the schema cannot refuse a second one.
Three authority checks: 404 to a stranger so the endpoint is not an existence
oracle, 403 to a member who is not the master, and the master refused as a
target of member routes.
Handle problems surface as 400 (unusable) or 409 (taken), including the
unique-index race. `TeamStore` throws a bare Error, which the server would turn
into a 500 and a deduped critical alarm -- an uppercase handle should not page
on-call.
Disable writes `user.suspended` as well as suspended_at and suspended_reason.
PUT-1707 named only the latter two, but those are siblings added by 0061 and
0063 -- `userProtected` rejects on `if (user.suspended)` and reads neither.
Setting only the timestamp and reason would have recorded a disable that never
took effect, and disable is the whole of offboarding here.
Sessions are dropped through SessionStore.removeByUuid rather than a raw
DELETE. The store invalidates every composite cache key with its double-delete
pattern; without that a disabled member keeps authenticating from cache for the
session TTL, which is exactly the "next request, not after a cache TTL"
property disable is supposed to have. Revoking also preserves last_ip and
last_user_agent, which the member-facing audit view reads.
Files are untouched and re-enable restores the account.
Adds team_not_found, not_the_master_account and not_an_org_account to the
HttpError legacy codes, which the controller also needs.
Billing events, invalidateActorSubscription, audit rows and the GUI push are
deliberately not here -- they belong to phase 3 and PUT-1708.
Membership management for workspaces: addMember, removeMember,
getMembership, isMember, listMembers and listTeamsForUser. The permission
scan is untouched -- readUserGroupPerms already joins jct_user_group and
resolves group grants; this is the management side.
Resolves the ticket's "do not leave two writers" by splitting domains and
enforcing the split in SQL rather than by convention. Every existing caller
of GroupStore targets a seeded system group -- ADMIN_GROUP_UID,
default_user_group, default_temp_group -- never a team, so the two stores
were already disjoint in practice. GroupStore.addUsers/removeUsers now carry
`AND kind IS NULL`, making a team uid a no-op there, which costs no extra
query because it folds into the existing subquery and matches how addUsers
already treats an unknown username. TeamStore's writes select group_id from
a kind-filtered subquery, so neither store can reach the other's rows.
org_owned is written here but never accepted from a request; TeamService
sets it at provisioning and workspace creation only.
listMembers is keyset-paginated on id per doc/pagination.md, using the
shared cursor and limit helpers and fetching one row past the limit to
decide whether a cursor is warranted.
Passes 1/0 for org_owned rather than db.booleanValue, which yields a real
boolean on postgres and is rejected by the smallint column there -- sqlite
accepted it silently.
`GroupStore` has only addUsers/removeUsers; nothing creates, reads back or
lists a group at runtime. `TeamStore` is that missing half, scoped to rows
with `kind = 'team'`.
A workspace is addressed by `uid`, which `group` has carried as NOT NULL
UNIQUE since 0015. `handle` is a mutable display label with no addressing
role, so a rename invalidates nothing and a stale reference can never
resolve to a different workspace.
Soft delete releases the handle and keeps `name`. Nothing points at a
handle, so the name returns to the pool instead of being reserved forever
by a global unique index that cannot exclude dead rows -- mysql has no
partial indexes, so that exclusion was never available.
Handles validate to ^[a-z0-9]+(-[a-z0-9]+)*$, 3-64 chars, against a
reserved list. The charset is deliberately narrower than the column so the
engines' collations cannot disagree: mysql's utf8mb4_unicode_ci also folds
accents and eszett, which sqlite's NOCASE and postgres's lower() do not.
Every read filters `kind = 'team' AND deleted_at IS NULL`, which is what
makes the seeded admin/system groups unreachable rather than merely absent.
Handle lookups compare lower(handle) on postgres, where the index is on
that expression rather than the column.
Insert-only record of what a workspace administrator did to an account,
shaped like \`audit_user_to_group_permissions\` after 0019: nullable FK
beside a NOT NULL \`_keep\` column. The FKs are ON DELETE SET NULL, never
CASCADE, so hard-deleting an account cannot erase the record of the
resets performed on it.
Two indexes rather than one. The member's own view is the only place a
reset becomes visible to the account it was performed on, so
(user_id_keep, id) is a read path, not an optimisation.
\`share.holder_group_id\` mirrors \`holder_user_id\` from 0067. The existing
unique index does not constrain team shares at all -- it leads with
\`holder_user_id\`, which is NULL on every team share, and NULLs are
distinct -- so the group-scoped unique index is what prevents duplicates.
Drops the \`role\` column from the specified DDL: it contradicted the
settled single-administrator model.
Review follow-ups on the dedup migration.
mysql and postgres track no per-file applied state and re-execute every
migration on each boot, so the unguarded DELETE self-joined the whole table at
every process start, forever. Both now sit behind the same index-existence
check that guards the ALTER, which also stops a rolling deploy deleting on one
instance while another adds the index.
The dedup test was a false green. `targetVersion: 67` never applies 0071 -- the
loop breaks on `threshold + 1 >= targetVersion` but stamps the target anyway --
so the fixture asserted the current schema version on a database missing a
migration. It now replays the real 0072 file against a fully migrated database,
and a second test pins the off-by-one so nobody builds a fixture on it again.
\`jct_user_group\` had no unique constraint on (user_id, group_id) and
\`GroupStore.addUsers\` had no conflict clause, so re-adding a member
inserted a second row. \`readUserGroupPerms\` joins the junction table on
group_id alone, so each duplicate returned another copy of every group
permission the user holds.
Deduplicate keeping the lowest id, add the unique pair index, and make
\`addUsers\` ignore conflicts via the existing \`insertIgnoreInto\` helpers --
without that last part the index turns a re-add into a raised error, which
five call sites would log as a failed signup step.
mysql cannot delete from a table it reads in a subquery (error 1093), so
it uses a self-join with the same lowest-id-wins semantics.
Review follow-ups on the team columns.
NOCASE moves onto the `handle` column itself, not just the index. Index-only
NOCASE makes uniqueness case-insensitive while leaving `WHERE handle = ?`
case-sensitive, so the same lookup would match on mysql (utf8mb4_unicode_ci)
and miss on sqlite. Postgres still needs lower(handle) at the call site.
`requires_password_change` becomes NOT NULL DEFAULT 0 on all three dialects,
matching the three sibling `requires_*` flags. Left nullable, any query written
as `= 0` would silently exclude every pre-existing user.
Schema foundations for teams. Ships dark — nothing reads these columns yet.
group: kind, name, handle, plan_id, deleted_at
jct_user_group: org_owned
user: requires_password_change
`kind = 'team'` marks a workspace; the seeded system groups keep it NULL so a
team query can never surface them. `org_owned` distinguishes accounts the
workspace created from the master account, deciding who pays rather than who
may read. `requires_password_change` is a fourth `requires_*` flag for
assertVerifiedAccount, needed by the phase 5 reset flow but shipped here to
avoid a second three-dialect migration.
`handle` uniqueness is case-insensitive, and the dialects disagree by default:
mysql gets it from utf8mb4_unicode_ci, sqlite needs COLLATE NOCASE (as
0055 does for usernames), and postgres indexes lower(handle). Without this the
same migration would accept `Design-Team` next to `design-team` on sqlite and
postgres while mysql rejected it. Postgres handle lookups must therefore
compare lower(handle) to use the index.
idx_group_owner is sqlite-only: mysql and postgres already index that column.
idx_jct_user_group_group is composite, unlike the existing single-column keys.
The Errors section claimed a `{ message, code }` body and a single
ten-minute wait. The body also carries `error`, `errorCode`, `provider`,
`upstreamCode` and, for pre-job rejections, `upstreamStatus`, and the
Sora provider still waits five minutes and folds refusals into
`upstream_failed`. Document the fields and the exceptions.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
A video job that outlived its poll window, an SDK request that timed out,
or a Veo operation that finished with an error all reached the HTTP error
handler as plain Errors. Each became an unhandled 500 with critical
severity and paged on-call for what is the provider's pace or the
provider's fault.
Video providers now share one poll loop that gives up with a 504
`upstream_timeout`, treats a transient poll failure (timeout, dropped
connection, 408/429/5xx) as a missed poll rather than a failed job, and
stops polling with a 400 `client_aborted` when the caller disconnects, so
nothing is metered for a clip nobody will receive. The driver controller
exposes the disconnect as an `abortSignal` on the request context. The
window is ten minutes for every provider; Together and BytePlus move up
from five.
Failed jobs are classified: content-filter refusals become a 400
`bad_request` with `errorCode: moderation_flagged`, rejected parameters a
400 `upstream_bad_request`, and anything else a 502 `upstream_failed`,
each carrying the provider's own code. Veo's filtered output keeps
`disallowed_value` and gains the same `errorCode`. The sanitizer and
content-filter pattern move from the Replicate provider into a shared
util so image and video agree.
Status-less SDK connection timeouts are translated to a 504
`upstream_timeout` at the driver boundary, and the chat driver records
them per attempt so an all-timeout chain is a 504 and a mixed chain is
`upstream_failed` instead of an `internal_error` 500. The Together chat
client gets the same ten-minute request timeout as the other providers.
The OpenAI video provider is left alone beyond an import path: its API is
scheduled to shut down on 2026-09-24.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
* feat: events metering and quotas (PUT-1683)
* fix: drop the standing subscription charge and price single deliveries at 100 µ¢
An idle durable row costs nothing worth billing; the plan quotas bound how
many an account holds. Removing the daily line also removes the global
day-claim, the whole-table scan and the timer it rode on.
* test: stop asserting on documentation pages
The limits test read rate-limits-and-quotas.md and grepped it for numbers,
so every rewording of the page failed the backend suite. Docs are kept in
step by the PR and checked in review; AGENTS.md now says so.
* feat: delivery re-check cache, revocation and anchor settle (PUT-1677)
* fix: authorize re-anchors, settle each row once, purge revoked backlog (PUT-1677)
- A path-form row whose anchor is deleted only climbs to an ancestor its
holder may still watch under the mode it subscribed with; otherwise it ends
with `anchor_deleted`. It used to land on any surviving ancestor (a guest's
row on the owner's home), where the re-check denied every delivery but the
row still held an anchor slot and a filter evaluation there.
- After a climb the new anchor is re-verified and the climb repeated if a
recursive delete took that level too, instead of leaving the row on a dead uid.
- suspend() is one conditional write per row and reports which rows it was the
one to suspend; concurrent settles of the same grant (an unshare revokes
several strings) no longer each purge, forget and notify the same rows.
- One "subscriptions ended" notification per holder and app, carrying the count
and subjects, instead of one per row.
- A revoke that removed nothing no longer announces; the sweeper purges (not
defers) the backlog of a permission_revoked row; the reap purges pending
entries with the row.
- The delivery auth cache indexes entries by subscription so forget() is not a
scan of the whole cache.
* feat: pending event deliveries and delivery-class invariants (PUT-1676)
* fix: make pending delivery claims and drains atomic, keep the region under its ceiling (PUT-1676)
- claim() and the drain-time reindex run as Lua over the subscription's own
{subId}-tagged keys. Two claimers can no longer both lease the head, and a
drain that finds the queue empty deletes it in the same step it checks, so a
concurrent enqueue is never wiped between the two.
- An append writes the entry and its queue position in one MULTI (same slot),
with the index seeded before it and corrected after, so an entry is never
visible without its position and never left out of the sweeper's index.
- Pipelines no longer mix slots (index/counter vs. per-subscription keys), so
the store works on a multi-shard cluster, not only a single-shard one.
- Region shedding counts the marker it leaves behind; it used to stop one over
the ceiling and convert a real event into a marker on every enqueue after.
- A claimed or suspended subscription moves to the back of the sweeper's index,
so a delivery nobody settles cannot hold the head against every other backlog.
- `single` rows must carry a `worker` target: with sockets exhausted and no
handler, an unacknowledged delivery would sit at the head forever.
- A gap marker for a row with no socket target is dropped rather than counted
as a delivery of nothing.
- Backlog keys carry a 7-day TTL, refreshed by every claim, as a backstop for
keys a purge/enqueue race left unindexed.
* feat: durable event subscriptions store, cache, and routes (PUT-1673)
* fix: durable subscription hardening (PUT-1673)
- Expired rows stop delivering at dispatch time and no longer count toward
the per-account cap, instead of waiting for the sweep.
- The expiry sweep runs hourly with a jittered first pass shortly after boot;
a 24 h interval never fired on a fleet that redeploys more often than that.
- Only a durable generation bump marks peer regions cold. A session
subscribe/unsubscribe in one region used to force a primary read in every
other region on its next dispatch.
- `subject`/`anchor_path` widen to varchar(4096) to match `fsentries.path`,
and subjects longer than that are refused with `invalid_subject` rather than
failing the insert on MySQL/Postgres.
- The dispatch and durable integration suites wait for the specific delivery
they expect and assert only within their own folder; the old any-delivery
`settle()` let a late event from a previous test satisfy or pollute the
next one under CI load.
* feat: puter.events SDK module (PUT-1675)
* fix: end event subscriptions on a server-side disconnect and retry budget refusals (PUT-1675)
- A disconnect socket.io will not retry (`io server disconnect`) now fails
every subscription with `events_connection_failed` and drops the socket, so
the next onLocal() starts a fresh connection instead of reusing a dead one.
- The connection closes when the last subscription lapses on re-subscribe.
- A re-subscribe refused with `too_many_requests` is retried after 10 s
rather than ended for good.
- The API suite no longer passes when it cannot connect; every runtime it
runs on (node, browser, workerd) carries the socket.
OpenRouter and Together reject a request whose prompt plus max_tokens
overflows the model's context window. Both providers retried by deleting
max_tokens, which threw away the output cap the credit gate had sized to
the caller's remaining balance and let the retry run to the model's full
output limit with no second gate and no new hold.
The retry now goes through a shared helper that sizes a new cap from the
window and input count the rejection reports, falling back to the model's
declared context and a doubled prompt estimate, and never exceeds the cap
the gate set. When no window can be determined or no output fits, the
original rejection is rethrown instead of retrying uncapped. The rejected
params are copied rather than mutated, so the first attempt's record is
not rewritten after the fact.
Also corrects the estimator's own comment, which described the mean of
two approximations as a deliberate halving.
Co-authored-by: Claude Fable 5.1 <[email protected]>
A Replicate prediction that ran and ended `failed` reaches the provider as a
plain Error with no HTTP status, so the driver-boundary translator could not
classify it and it surfaced as an unhandled 500, a critical alarm, and an
on-call page. Most of these are the model's content filter refusing the
user's prompt.
Wrap the run call and classify the failure: content-filter refusals become
a 400 with `errorCode: moderation_flagged` (the code chat refusals already
use); anything else becomes a 502 `upstream_failed`, which the alarm gate
skips. Status-bearing SDK errors pass through untouched so the boundary
translator keeps handling them. Upstream messages are stripped of markup and
bounded so an HTML error page can no longer ride into a response body or an
alarm signature.
Documents the codes callers can now act on in the txt2img reference.
Co-authored-by: Claude Fable 5.1 <[email protected]>
* feat: app-scoped share listing and revoke surface (PUT-1670)
* fix: address review on app-scoped share surface
- Scope the uid-addressed revoke to the named row: only that row's
issuer's grant is withdrawn, and only that one invite cancelled —
an app or owner addressing one row no longer takes another issuer's
grant on the same (item, recipient) pair with it.
- Delete a pending row directly on uid-addressed revoke, so an invite
whose address registered but never claimed can still be withdrawn.
- Read the legacy `issuerAppUid` data key in the SQL app filter and
grouping, alongside the unified `issuedByApp`.
- Refuse malformed `appUid` input (duplicated param, empty string)
instead of silently listing everything, and refuse app-listing
cursors that decode but name no appUid.
- Derive the acting app from `effectiveApp` alone, per the actor
contract; drop the second derivation site.
- Pin the attribution semantics with tests: one row records one
issuance, so re-sharing the same pair re-attributes it to whoever
issued last, in both directions.
- Soften the uniform-404 docblocks to what the gates actually answer.
* feat: readable grant audit trail (PUT-1674)
* fix: cover the apps summary's no-app-group first page (PUT-1670)
listOutboundApps sorts the no-app group first via an empty-string
sentinel. Add a regression test pinning that a first page (no cursor)
actually returns it, and that the cursor it hands back resumes past it
into the app-keyed groups rather than skipping or repeating.
* feat: global outbound share listing (PUT-1664)
* fix: address review on outbound share listing
- Check share-row liveness per (holder, entry, issuer) so a grant
withdrawn outside unshare doesn't stay listed while another issuer
still reaches the same holder; batch the permission reads across the
whole page instead of per holder.
- Retire a revoked issuer's unclaimed invites in the revoke cascade,
and hide invites whose issuer lost their authority at read time.
- Unify the pending/active app-attribution key on `issuedByApp` and
dual-read the legacy `issuerAppUid` spelling.
- Add the missing share issuer index (sqlite, postgres) and correct
the listOutbound plan comment.
- Refuse cursors that decode but name no id instead of silently
restarting from page one.
- Consolidate the five hand-built ResolvedShare literals and the two
listing endpoints' parse/shape code.
- Ship the SDK surface: puter.fs.listSharedByMe() with docs, types,
suite coverage, and the rate-limit page entry.
Register claude-fable-5-1 in the Claude catalog and gate it in the
provider the same way as Fable 5: no sampling params, effort via
output_config, adaptive thinking with summarized display. The bare
claude-fable / claude-fable-latest aliases move to 5.1, matching how
the Opus aliases moved when Opus 5 landed.
Fable 5.1 keeps Fable 5's $10/$50 per MTok, 1M context and 128K output,
but bills cache reads at 0.025x input instead of the 0.1x every other
Claude model uses, so the catalog row carries its own rate and a test
pins it.
Co-authored-by: Claude Fable 5.1 <[email protected]>
The shell renders its anonymous markup — the marketing homepage, an
`/app/<name>` landing — off the session cookie alone, and that cookie is
set with no maxAge, so a browser drops it on quit while the GUI's
localStorage token lives on. A returning user is served the anonymous
page and the GUI only tears it down once `whoami` answers, a network
round-trip after first paint. That teardown is the flash.
Gate it before the paint instead. The shell now emits, as the first thing
in <head>, a rule hiding `.hide-if-logged-in` under an <html> class that
an inline script adds iff `auth_token_v2` is in localStorage. The rule is
already in the cascade when the markup is parsed, so a browser holding a
token never paints it at all.
`initgui` settles the guess the token represents: `whoami` confirming the
session removes the nodes outright (replacing the old `#appLanding`
removal), and no session — none stored, or one `whoami` rejected — drops
the class so the markup comes back. The gate carries its own 12s failsafe
so a bundle that never boots can't strand a blank page.
SEO is unaffected: the HTML is byte-identical for every client, nothing
branches on user-agent, and a crawler has no stored token so it never
adds the class. Unreadable storage fails open the same way.
Anonymous markup opts in with `class="hide-if-logged-in"`, which
`home.html` already carried.
Drop the delayed fade-out when a logged-in user reaches the GUI and remove the landing overlay immediately instead. This avoids the overlay sitting above the email/phone/card verification gates because of its z-index.
Remove the /app landing overlay once `whoami` confirms the user is authenticated, even if the server rendered the page as anonymous because the session cookie was missing. This prevents the overlay from covering the email, phone, and card verification gates during localStorage-based session restores.
On device-phone/device-tablet, style.css pins every .window to
z-index 9999999 !important — including the fullpage dashboard window.
The Add Existing Account login dialog opens with backdrop: true, and
the .window-backdrop wrapper is not a .window, so it kept its small
inline z-index and rendered entirely behind the dashboard.
Pass stay_on_top: true like every other backdropped dashboard dialog,
and make the Forgot-password child dialog inherit the flag so it does
not open buried under the now stay-on-top login window's backdrop.
Verified with Playwright on iPhone 13 emulation and a desktop
viewport: login and recover-password dialogs stack above the
dashboard in both.
The app shell fed the row's full description into <meta name=
"description">, og:description and twitter:description. Long
descriptions now collapse whitespace and cut at a word boundary with an
ellipsis, never exceeding 150 characters.
Co-authored-by: Claude Fable 5 <[email protected]>
The JSDoc claimed non-app actors are rejected; they are passed through, and
the check reads `actor.app` rather than `effectiveApp`, so an app in the
token chain is invisible to it. Callers depend on the pass-through — routes
combining `adminOnly` + `allowedAppIds` are reached with an admin's browser
session, and the dev-account surface is called from the desktop's own
session — so the docs are corrected instead of the behavior, on the gate and
on the `allowedAppIds` route option. Tests cover the gate per actor shape
(user session, worker, full-access token, app-issued access token,
app-under-user allowed/disallowed) and the admin composition.
A live audit of every keyed provider's /models endpoint against the hardcoded
catalogs found no stale entries but large gaps. This backfills them under four
rules: nothing vendor-deprecated, nothing without a price confirmed on the
vendor's official pricing page (each entry's source was recorded during
review), nothing absent from the live /models listing, and nothing that fails
a live routing probe.
Added: 46 Alibaba entries (qwen3/3.5/3.7/3.8 families, VL/omni/MT lines, and
Model Studio's hosted GLM/DeepSeek/Kimi third-party models) plus 9 dated
aliases; OpenAI chat-latest and gpt-4o-2024-11-20 plus 16 snapshot aliases;
Gemini gemma-4-31b-it and gemma-4-26b-a4b-it (vendor-documented free tier)
plus rolling -latest aliases; Mistral-hosted zai-glm-5-2 and a
mistral-medium-3.5 alias; deepseek-v4-flash-vision-exp; glm-5.3-flash.
Culled by the rules: 15 vendor-deprecated OpenAI entries (the 3.5/4/4-turbo
legacy line, gpt-4o-2024-05-13, o1-pro, four chat-latest predecessors, the
5.x codex line — deprecations page, most shut down 2026-10-23) and dated
aliases onto the deprecated o1/o3-mini/o4-mini; qwen3-vl-flash-2025-10-15
(live routing probe returned upstream 400 twice). Tiered Alibaba prices are
encoded at the base tier and busy-hour rates where time-of-day priced, noted
in comments.
Every surviving addition was verified end-to-end through a local deployment:
58/58 answered a live prompt, including all 46 Alibaba entries and every
spot-checked alias.
Not changed, flagged for maintainers: pre-existing o1, o3-mini and o4-mini
entries are now vendor-deprecated (shutdown 2026-10-23); the pre-existing
deepseek-v4-flash/-pro prices no longer match DeepSeek's current pricing
page; gemma-4 emits its own <thought> markup inline in content.
Co-Authored-By: Claude Fable 5 (1M context) <[email protected]>
Live-probing magistral-small-latest showed the model inlines its reasoning as
answer prose in a flat string — no ThinkChunk content, no markers, nothing a
client can separate. Mistral's chunked thinking shape is requested via
`prompt_mode: 'reasoning'`, which the provider previously dropped on the
floor: there was no way to even ask for it.
`custom.prompt_mode` now forwards to the SDK's `promptMode`, following the
BytePlus custom-params precedent. Opt-in rather than a default because the
API rejects the mode where the account/model lacks it ('Reasoning prompt
mode is not enabled for this model', code 3051) — verified end-to-end: the
3051 travels back through the stack, which also proves the parameter is
delivered. The moment Mistral enables the mode, the ThinkChunk content flows
into the existing splitter and comes out as `message.reasoning` and
`reasoning` stream chunks with no further changes.
Co-Authored-By: Claude Fable 5 (1M context) <[email protected]>
The SDK-wide flag now mirrors the per-call option's tri-state. Left unset
(the default), the release-date policy applies: models released on or after
2026-09-01 are normalized to the OpenAI shape, older models keep their
vendor-native shape, and nothing rides the wire — the server's policy
resolution decides. Setting `true` force-normalizes every chat() call
regardless of release date; `false` disables normalization for every call;
either explicit value is sent on each call that doesn't set its own.
A per-call `normalize` overrides the flag in both directions, and assigning
`undefined` restores the policy.
Co-Authored-By: Claude Fable 5 <[email protected]>
Creating a hosted subdomain gated `root_dir` on `write`, and hosting serves
everything under that directory with the ACL deliberately bypassed. So a
recipient of a `write` share could point a `*.puter.site` subdomain at the
owner's folder and make the subtree world-readable — continuously, covering
files the owner added later, with the row under the recipient's account where
nothing the owner can list would show it. `update` had the same gate for a
changed `root_dir`.
`#checkPublishAccess` now decides both: the actor's own tree still takes
`write`, anyone else's takes `manage` — "Can edit & share", the level that
delegates the decision.
Keyed on who owns the entry rather than asking for `manage` outright, which is
what the ticket proposed. `manage`'s is-owner implicator declines to answer for
app actors, so a flat `manage` would refuse every app publishing a directory
its user handed it, with no way for the app to obtain the grant. The write
check still runs first — it is what masks a directory the caller cannot see as
a 404 — and `manage` satisfies every lower mode, so the order costs a
manage-holder nothing.
The GUI's Publish As Website item reuses the own-it-or-`manage` answer it
already computes for sharing, so it is not offered where this would refuse.
Docs state the rule on `hosting.create()` and in `share()`'s level list.
Regression tests fail without the driver change: a write-share recipient is
refused on create and on repointing an existing subdomain, while `manage` and
the actor's own directory are accepted.
Opening a file you hold read-but-not-write access on (a read-only share)
failed silently. For such a file the backend correctly omits write_url from
the /open_item signature, but launchApp appended it to the app iframe URL
unconditionally. URLSearchParams coerces undefined to the string \"undefined\",
so the app received puter.item.write_url=\"undefined\" — truthy, so the editor
believed the file was writable, and an invalid URL, so it broke on open. Only
read-only shares hit this; files you can write carry a real write_url.
Extract the puter.item.* param building into append_signed_item_params and
guard the write_url append so it is only added when present. launchApp.js is
too coupled to UIWindow/jQuery/window globals to unit-test directly, so the
pure helper carries the logic and its own test, matching the helpers/ pattern.
Regression test pins both directions: a read-only signature omits write_url
entirely (no \"undefined\"), and a writable signature still forwards it.
The fs-path-to-uid permission rewriter split permission strings on the raw
\`fs:\` substring instead of parsing on component boundaries. A path can
itself contain \`fs:\` — a home dir named \`…fs\`, or \`fs\` in the mode
position — and the raw split mistook that for the mode delimiter.
Crafting \`fs:/<victim>fs:junk:read\` made the split do two things at once:
it dropped the \`junk:read\` mode, and it consumed the trailing \`fs\`, turning
the harmless-looking nonexistent path shown in the consent dialog into the
victim's real home path. The rewriter then stored a bare \`fs:<home_uuid>\`,
which subsumes every mode via parent-permission matching — full
read+write+delete from a request the user saw as \`junk:read\`.
Parse with PermissionUtil.split() in both matches() and rewrite(), matching
every other permission parser, and locate the \`fs\` component by position
(after an optional \`manage\` prefix). The path component is now exactly what
sits between \`fs\` and the next unescaped colon, and all trailing components
are preserved as the mode — so an embedded \`fs:\` is data, never a delimiter.
The crafted input now addresses the nonexistent \`/<victim>fs\` and 404s.
Regression tests pin both halves: the exact PoC must 404, and an \`fs:\` in
the mode position must survive the rewrite instead of collapsing to a bare
permission. Both fail on the old rewriter and pass on the fix.
`env = 'app'` was decided by the presence of a `puter.app_instance_id` query
parameter and nothing else, so a crafted link put any page that loads the SDK
into app mode — and app mode is what makes the URL's `puter.api_origin`
authoritative for every credentialed call.
App mode now also requires the document to be framed. The GUI only ever
launches an app into an iframe, so this costs a real app nothing while a
top-level document carrying the parameters is treated as the third-party site
it is. It is not an attestation that the framing document is the GUI — a
cross-origin ancestor's identity is not readable — so the token paths carry the
rest:
- The `web` boot branch adopted a stored token without consulting the origin it
was bound to, which is what completed the fixation: one link plants a token
bound to an attacker's origin, and every later visit adopted it. It now
applies the same binding rule the app branch does, and drops a token that
fails it rather than leaving it to be re-read.
- `signIn()` had no env guard, and in app mode delivered a real token to
whatever `puter.api_origin` the launching URL named. Apps get their token
from the session that launched them, so it now rejects there with
`not_available_in_app`. Nothing internal reaches it in app mode:
`authenticateWithPuter` and both implicit-auth call sites already gate on
`env === 'web'`.
- The cross-origin-isolated branch polled `${this.APIOrigin}/login/wait` and
adopted whatever came back. Pinned to `defaultAPIOrigin`, the same way the
popup and its message handler already pin `defaultGUIOrigin`.
Backward compatibility: no signature, response field or existing error code
changes. The only behaviour a caller can observe is the new `signIn()`
rejection, which replaces a call that could not have worked correctly.
Covers the SDK side of the parameter PUT-1395 and PUT-1427 closed on the GUI.
Review of the previous change found three of its claims unmet.
The image-generation crash it reported fixed is still reachable. The assert was
scattered across three helpers, and Gemini and OpenAI call `isHttpUrl` directly
on `input_images` without going through any of them — so two of seven providers
still 500 on a non-string. `isHttpUrl` now refuses a non-string itself, and the
shape is settled once in `ImageGenerationDriver.generate`, where the driver call
arrives, rather than per helper. That also covers `input_images` that isn't an
array, which produced a different crash per provider.
The sixth case in the ticket, previously unlocated, is
`Messages.js` reading `tool_call.function.name` with no guard — reachable with
`{"messages":[{"role":"assistant","tool_calls":[{"id":"x"}]}]}`. Guarded, along
with the same shape in `make_claude_tools`: a TypeError there carries no status,
so the retry loop reads it as a provider failure and marks the route unhealthy
for every caller.
`#hardExpiryFromExpiresIn` returning null for a bad type moved the failure past
the session INSERT, leaving an orphaned non-expiring row and still answering
500. Reverted; the controller guard is the fix, now covering fractions,
negatives and unparseable durations rather than only wrong types.
Also: the batch write handlers check that the body is an array but not what is
in it, so a null element 500s the same way; `#requireObjectBody` accepted an
array despite its name; `handleCreateAccessToken` destructured a body that may
be absent; and two AGPL notices had been rewrapped with a Markdown link.
A socket was checked once at handshake and never again. Nothing in the backend
disconnected one, so logout-everywhere, password reset, session revoke and
suspension all left every connection streaming legacy FS entries, upload paths
and notification bodies — up to 400 per account — on a credential that had
already been revoked.
Three gaps, three fixes:
- The handshake skipped the suspension and pending-verification checks every
authenticated HTTP route gets. `decideSocketAuth` now applies both.
- `revokeCascade` reports which rows it revoked, AuthService announces that as
`auth.sessions.revoked`, and SocketService drops the account's room. The
whole room goes, not just the revoked session: narrowing it would need
`fetchSockets`, which the adapter builds on `serverCount()` — and that calls
node-redis's `send_command`, which ioredis does not implement. A connection
whose session survived reconnects on its own and re-authenticates.
- A bulk suspension writes `user.suspended` without touching `sessions`, so no
revoke fires. A five-minute sweep re-verifies each live socket's token and
drops the ones that no longer authenticate. De-duplicated by token, since a
browser's tabs share one.
Each of these read a field off caller input that wasn't the shape the code
assumed, threw a TypeError, and was served as a 500 with a critical page.
- POST /fs/write and /startWrite: a request whose body never parsed left
`req.body` undefined, and the first read of `fileMetadata` threw.
- POST /drivers/call, image generation: `input_image` / `input_images` entries
are documented as strings but nothing checked, so a number or an object
reached `.startsWith`. Type confusion on caller input, so reachable on
demand rather than by accident.
- POST /auth/create-access-token: `expiresIn` went to the expiry parser
unvalidated, where anything but a string or a number has no `.trim`.
- POST /login/wait: destructuring `session` out of an absent body threw.
Same class as the POST /login body ticket; that one covers /login itself.
The only thing in front of the bcrypt compare on the DAV host was the 600/min
request ceiling, keyed on a fingerprint that rotates with client-controlled
headers. /login guards the same credential with a captcha and two much tighter
buckets; DAV had neither, which left password and TOTP guessing viable from a
host that answers any origin.
The request ceiling can't double as a credential ceiling — a working DAV client
resends its credentials on every request — so the new buckets count only
verifications that failed: 10 per account and 50 per address per 15 minutes,
sized like /login's. They're read before the compare, so an exhausted bucket
costs no bcrypt round, and successful requests never draw them down. `-token`
attempts are held by the address bucket alone; bucketing them per account would
let bad tokens lock out good ones.
Reading a bucket without spending from it is new, hence `peekRateLimit` and the
matching `peek` on all three backends.
Also documents the DAV limits, which were undisclosed.
Both signup paths read the x-forwarded-for header directly for the
puter.signup.validate event, the puter.signup.success event and the
signup_ip_forwarded column. Behind an appending proxy a client can prefix that
header with anything it likes, which gives every per-IP abuse signal a fresh
bucket per request.
req.ip is the value `trust proxy` resolves, so it is the one the server can
stand behind; server.ts already uses it for the ip.validate gate for exactly
this reason. All three now share one derivation, so a per-IP counter is written
and read under the same key. The raw chain is still recorded, but only as
audit_metadata.ip_fwd, where nothing keys on it.
Rows written before this hold whatever the proxy appended, so per-IP velocity
over the trailing window is undercounted until they age out.
All three block routes set only `subdomain`, `requireVerified` and a rate
limit, and the controller's actor check accepts anything carrying a user, so an
app-under-user token passed. Unlike `share` and `revoke`, nothing else bounded
them: an app the user authorized once could read exactly whom they had blocked,
then clear the list — blanket switch and per-username — and reopen the channel.
A block list is a personal safety control, not something an app can otherwise
reach, so it falls outside the "an app can share what it can already reach"
carve-out the other share routes rely on. `requireUserActor` on all three, and
deliberately without `allowFullAccessToken`: this is security management, which
stays closed to every access token, personal ones included.
The only caller is the desktop's Blocked Senders window, which sends the user's
own session token.
Tests fail without the gate: an app token minted through
/auth/get-user-app-token is refused on all three routes while the user's own
session still succeeds, and a metadata check pins the gate on every block route
so a fourth cannot quietly ship without it.
The comment claimed the fallback loop cannot be driven from a test — false
since ChatCompletionDriver.test.ts gained a two-attempt fallback test that
drives the actual loop. Say where that test lives instead.
Co-Authored-By: Claude Fable 5 (1M context) <[email protected]>
Third triple-check round. Ten findings were put through independent skeptics
first; six did not survive — pre-existing on main, inert, or resting on a false
premise — and are not acted on here.
Mistral streamed thinking now goes to `reasoning` on every path. The previous
commit gated the split, which made this the only place in the repo where
chain-of-thought reached the visible text channel, and made Mistral the only
provider whose streamed chunk *types* depend on a response-format flag. Every
other reasoning path routes thinking to `reasoning` unconditionally —
ClaudeProvider's thinking_delta, the DeepSeek/OpenRouter rename, and this
branch's own Responses summary-delta handler. Removing the gate restores that
uniformity and makes the documented promise that streaming is unaffected by
normalization true again; the two opposing tests collapse into one that runs the
same fixture with and without `normalize` and asserts identical event streams.
Docs stop claiming older models are unchanged. Four reasoning fields were made
consistent across all models, ungated, and one of them removes a field: on
non-streaming responses `message.reasoning_content` is now `message.reasoning`.
chat.md gains a table naming all four so a caller reading `reasoning_content`
learns why it disappeared, instead of reading that nothing changed for them.
Adds the driver-level fallback test. Writing it surfaced that the invariant it
was meant to assert is false and always was: the driver rewrites string
`content` into text blocks in place on the caller's own messages
(`normalize_single_message`, pre-existing) before any provider runs. The test
now asserts what is true and load-bearing — both attempts receive the same array
reference, and the reasoning artifacts survive attempt 1 so attempt 2 can still
replay them.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Acts on a second triple-check audit.
`normalized` means one thing. The driver stamped it on both the OpenAI-shape
path and the legacy `response.normalize` path, which converts toward Anthropic
blocks — so a caller could get `normalized: true` alongside array content, and
the flag told them nothing they could branch on. The legacy branch no longer
sets it. That branch is reachable only by a direct driver call with
`response.normalize` and no `normalize`; the four wire routes pin
`normalize: false`, which skips it.
Mistral streaming, split by concern. Flattening a reasoning model's chunked
`delta.content` to a string is a correctness floor and stays ungated — the
shared handler passes the value straight to `addText`, so an array reaches the
caller as stringified objects. Splitting the thinking text out into a
`reasoning` delta is the dialect change and now sits behind the policy gate
like the non-streaming remap. On the native path the thinking text is kept
inline rather than dropped.
Mistral `finishReason` is deleted only once its value carried over. The delete
ran unconditionally, so a non-string `finishReason` with no `finish_reason`
left the choice with no finish reason at all.
Four doc claims corrected against the code paths they cover: `content` is
string-or-null on normalized responses (tool-only turns carry no text, and the
`// always a string` example comment was wrong); `reasoning_details` is not
scoped to normalized responses, since Responses models emit it either way; and
the release-date rule depends on the serving provider's own dates — OpenRouter
derives them from its live API, so models newly listed there from 2026-09-01
normalize by default.
Adds the test the copy-on-write fix was actually for: one messages array sent
through two sequential calls, asserting the caller's array is untouched and
both attempts carried the thinking signature. That is the fallback hazard; the
harness wires one provider per model, so the fallback loop itself cannot be
driven from a provider test.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Acts on a triple-check audit of this branch.
Gate the Mistral dialect remap. The camelCase→snake_case rewrite and the
chunked-content flattening were firing for every Mistral call regardless of
`normalize` or the cutoff, deleting `finishReason` and `message.toolCalls` out
from under any caller reading them. Both now sit behind the policy resolution
the driver already used, extracted as `shouldPresentAsOpenAI` so the provider
and the driver cannot drift. The streaming chunk-array split stays ungated:
handing an array to `addText` is a plain bug, and streamed chunks are
provider-uniform by design. The conformance matrix now passes `normalize: true`,
which is the contract it was always testing.
Unify the reasoning join. Three code paths produced two separators while one
doc sentence described them all: the coercer joined thinking segments with '',
the Responses handler and Mistral with '\n\n'. The coercer now matches, and
chatresponse.md's claim is true for every path it covers. Text blocks still
join with '' — Anthropic splits prose mid-sentence across them.
finish_reason is an open set. chat.md's normalize bullet and the SDK
ChatMessage typedef still declared a closed four-value set, contradicting the
documented pass-through of unmapped vendor reasons and the coercer that
implements it.
Stop mutating caller messages. Both reasoning-replay input paths deleted
output-only fields from the caller's own message objects, which the driver
reuses across fallback attempts. Both strip a copy now; tests pass a frozen
message through each.
Drop three dead things the type cleanup left: the no-op ChatProvider
checkModeration stub (no subclasses, no callers — its removal restores a
pre-existing baselined TS2420), the redundant second normalizeReasoningContent
call in BytePlus and ZAI, and the coercer's bare-string branch that no provider
reaches. A bare string now passes through by reference instead of being
coerced.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Commit 6b4f5b01f dropped 31 entries (49 error instances) from
tools/typecheck-baseline.json as a side effect of fixing the AI-code type
errors they suppressed. The file is a ledger the maintainer owns, and shrinking
it inside a feature PR ships a CI-gate change nobody asked for.
Restoring is free: tools/typecheck.mjs fails only on *regressions*
(count > baseline), so stale entries are non-fatal — the gate prints "49
baselined error(s) fixed. Run npm run typecheck:update to lock that in." and
exits 0. Nothing else in the repo reads the file, vitest included, and
tsconfig.build.json's noCheck:true means emit is unaffected. The errors stay
fixed in the source either way; only the ledger's own bookkeeping is deferred
to whenever the maintainer chooses to regenerate it.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
`magistral-*` returns `message.content` as a ContentChunk[] rather than a
string, with the thinking text nested one level deeper inside `thinking`
chunks. The camelCase remap did not touch it, so a non-streamed magistral
response reached the caller as an array with no `reasoning` — the one case
left where a provider did not produce the equalized shape this branch
promises. Streaming had the matching bug: the chunk array was handed to
addText, which would have stringified it into the text stream.
Both paths now split chunked content into a string `content` plus a
`reasoning` string, joining multiple thinking chunks with a blank line as the
Responses handler and the Anthropic coercer do. The streaming fix rides the
existing Mistral-only `chunk_but_like_actually` hook, so no new deviation is
introduced.
The conformance matrix had no Mistral reasoning fixture, which is why it
missed this; it now has one carrying chunked content, verified to fail
without the flattening.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Rules from the post-normalization review: don't silently change what existing
models return, verify doc claims against every code path they cover, record
self-disclosed defects in the PR draft, finish with a fresh build + suites, and
check git stash before concluding an edit was lost. Plus the standing
typecheck-baseline no-go.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Closes the reasoning gaps left open by the normalization work.
Reasoning replay. The coercer dropped Anthropic thinking-block signatures and
the Responses handler dropped reasoning item ids/encrypted_content, so a
normalized reasoning turn could not be replayed — Anthropic rejects an
extended-thinking tool-use continuation whose thinking blocks lost their
signature. Both now ride `message.reasoning_details` verbatim, and both input
paths accept them back: ClaudeProvider splices the blocks ahead of the content
(Anthropic requires them to lead), and the Responses input processor expands
them into standalone `reasoning` items. Output-only fields a replayed message
carries (`reasoning`, `refusal`, `normalized`) are stripped on both paths,
since neither upstream accepts them. The docs caveat recommending
`normalize: false` for agentic Claude loops is gone; it is no longer true.
Unmapped stop reasons. chatresponse.md promised a vendor `finish_reason` with
no OpenAI analog "passes through unchanged" — true for the Mistral remap, false
for the Anthropic coercer, which discarded it. Anthropic's `pause_turn` means
"continue this turn", so flattening it to `stop` destroyed the signal. The
coercer now passes unmapped values through verbatim, matching both the doc and
the Mistral path, and the docs gain the full Anthropic stop-reason table.
Reasoning summaries. Multi-part summaries joined with '' instead of a blank
line, and the streaming Responses path emitted no reasoning at all;
`response.reasoning_summary_text.delta` now feeds the same `reasoning` stream
channel the chat-completions handler uses.
Types. `text?: string & { verbosity?: ... }` was an uninhabitable intersection
(providers read `text?.verbosity` as an object), and the verbosity enum was
`'concise' | 'detailed'` where OpenAI accepts `'low' | 'medium' | 'high'`.
Adds `reasoning`, `reasoning_details`, and `refusal` to the SDK ChatMessage
typedef.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Adds the upstream Hoonify provider (feat #3499, merged after this
branch was cut) to the cross-provider output conformance suite. It
speaks the OpenAI chat-completions dialect and conforms out of the box.
Co-Authored-By: Claude Fable 5 <[email protected]>
Introduces a new `normalize` option for chat completions, plus release-date based default normalization (post-2026-09-01) to coerce provider-native outputs into a consistent OpenAI-style shape. Adds shared normalization utilities, extensive driver/provider consistency tests, and controller safeguards that pin provider-native output where route-specific translators are used. Also wires the option through puter.js (`chat` options and `puter.ai.normalize` default), updates AI/chat response docs and examples, and resolves related TypeScript typing issues reflected in the typecheck baseline.
`puter.perms.request()` already pooled a permission read and prompted only
for what was missing. The raw `puter.ui.requestPermission()` did not, so
every caller still on it re-asked the user on each launch — including
`perms.requestAppData()`, whose own docs promise the opposite, and the
driver-denial retry.
- puter.js: `ui.requestPermission()` reads what is held before prompting and
resolves true when the whole request is covered. Only in env=app and
env=web, the environments that raise a prompt; elsewhere the method still
answers false without asking anyone. A check that cannot be made — no
token, an unreadable request shape, a failed read, or one that outlasts its
timeout — falls through to the prompt rather than standing in for an
answer. Public signature unchanged.
- GUI: the request-permission popup asks the same question as the app, using
the user-app token its own exchange already mints, and skips the dialog
when the access is held. This is the one case the SDK cannot settle for
itself: a signed-out site holds no token to check with. An origin the
browser does not vouch for never reaches the check, since the exchange
fails first.
Both checks are time-boxed, because each one stands in front of something
that is waiting: the popup's gates the dialog, so a stalled read would leave
the prompt unshown and the opener pending, and the SDK's spends the browser's
transient activation, which a slow read would cost the popup.
Note that driver, service and feature scopes are implicitly granted to every
app (backend/data/hardcoded-permissions.js), so requests for those now
settle silently — the dialog was asking about access the app already had.
Consent scopes (email, fs, apps, subdomains, app-data, app-root-dir) are
unaffected and still prompt until granted.
Fixes a bug this method already had on the way past: `pollDecision` read an
undeclared `permission`, so every attempt threw a ReferenceError into its
network-failure catch and the COOP-severed-opener recovery burned its full
five-minute timeout before answering false. It polls `requested` now, and
requires the whole list.
Tests: the e2e suite drove its dialogs with an implicitly-held driver
permission, so the fixture now asks for a driver nothing implies, fresh per
page load, which also removes the cross-test grant carry-over the old
revokes worked around. The reconciliation tests ask for the held scope plus
an unheld one, since a fully-held request no longer reaches a dialog. Adds a
backend contract test for check-permissions under an app-under-user actor,
which is what the two new client paths rest on.
The panel listed only what the user hadn't dismissed, so acting on a
notification made it vanish. It now shows the 30 most recent regardless
of state, with read/unread as a visual flag: unread rows carry a dot and
a check to mark them read; reading one (check, click-through, toast
close, mark-all, or an ack from another tab) leaves it listed but
quieter. The badge, tab title, and header count follow the unread count.
* Show share notifications in the dashboard
The dashboard opens its own socket but never listened for notif.* events,
so a file shared with a user on the dashboard was announced to nobody.
Add a notification center to the dashboard: a bell in the sidebar with the
unread count (a dot when collapsed, and on the mobile hamburger), a panel
anchored to it — a bottom sheet on phones — listing what the server still
holds as unacknowledged, and toasts for what arrives live. Clicking a share
lands on Files › Shared with the item selected; dismissing, and "Mark all as
read", acknowledge on the server so other tabs clear too. A toast timing out
is not a dismissal: the entry stays unread in the panel.
Arrivals fold in by uid (a regrouped share rewrites its row and toast in
place), the panel refreshes on open, reconnect and tab focus so shares the
backend folds in silently past the sender's budget still surface, and a
burst on connect is capped at three toasts plus a summary.
Backend: notif.unreads carries created_at so delivered-on-connect items can
be dated, and listings break same-second ties by id so order is stable.
The desktop's mark-ack calls move to a shared helper; UINotification gains an
optional auto-hide timeout that pauses on hover/focus.
* fix: look up notification glyphs and icons by own key only
A notification whose `source` or `icon` was a prototype key such as
`constructor` made the glyph lookup return a function, and the toast
icon builder then threw inside the socket handler — which dropped the
whole burst of toasts it was part of. The list rendered the same entry
as "[object Object]".
* fix: show dashboard toasts above open app windows
App windows opened from the dashboard are stay-on-top and stack in the
99999999+ band, so the toast container at 10000000 sat underneath them:
any notification arriving while an app was open — the usual state of a
dashboard session — was drawn behind the app and never seen.
* fix: reveal the dashboard when a toast is clicked over an open app
Clicking a share toast switches the dashboard to Shared, and the "N new
notifications" toast opens the panel — both inside the dashboard window.
With an app maximized over it, all of that happened out of sight and the
click appeared to do nothing. Minimize the covering app windows first,
the way the minimize controls do, landing the URL on the dashboard's own
route, and act once the history pop has settled so the tab switch is not
traversed over.
* fix: keep keyboard focus in the notifications panel across re-renders
Every change to the list rebuilds its rows, which dropped focus to the
document body: dismissing an entry with Enter threw the keyboard out of
the dialog (the row it had just been moved to was replaced), and so did
any arrival while an entry was focused. Put focus back on the same entry
after a render, or on the one that took a dismissed entry's place, and
let Shift+Tab from the panel itself wrap to the last control instead of
leaving the dialog.
* fix: keep the notifications panel inside short viewports
The anchored panel is bottom-aligned with the bell and grows upward, but
its height was capped only by the viewport (560px or 100vh - 24px), not
by the room above the bell — on a short window the header ran off the
top of the page. Cap it to that room, so the list scrolls instead.
* fix: make notifications with nowhere to go inert in the panel
An entry with no target (a worker deploy result) showed a default cursor
yet, when clicked, was dismissed and took the panel with it — nothing
opened, the entry was gone, and the list had closed. Render such entries
as text with the ✕ as their only action; only share entries remain
buttons. The ✕ now names its notification for screen readers, since on
an inert entry it is the only focusable control.
* fix: stop a listing in flight from resurrecting dismissed notifications
The list is refreshed on open, on reconnect, and when the tab comes back
into view; a dismissal landing while that listing is in flight was undone
when it resolved, since the server's snapshot predates the ack. When the
listing also resolved after the server's own ack event, nothing removed
the entry again and it stayed until the next refresh. Leave out of the
reconciliation whatever was acknowledged — here or in another tab —
since the listing was requested.
The realtime fan-out resolved its audience straight from the `share`
index, which has no live-grant check. `/auth/revoke-user-user` deletes
the permission and leaves the index row, so a revoked recipient's socket
kept receiving name, size, masked path and mtime for every write and
move under the folder, with no expiry.
The service already solves this elsewhere — `#reachingHolders` returns
exactly the holder/entry pairs whose grant still stands, and
`listSharedWithMe` was moved onto it for the same reason. The realtime
path never got the same treatment; it does now.
Free on the unshared path: with no share rows reaching the entry there
are no holders to check, so the write path every user takes is unchanged.
Pinned by a test that counts permission reads.
A grant on the entry itself is keyed on uuid, so it follows the entry
into the owner's Trash. Both ends of the move then resolved, and the
recipient was told the shared item had moved — to the GUID name Trash
gave it. Their own copy got renamed to a GUID and stayed on screen.
`shared-with-me` has always omitted trashed entries, so the listing and
the event disagreed; only the event was wrong. Trashing now reports
item.removed at the path the recipient knew, which is also what the
desktop's data-path selector needs to find the row. Restoring out of
Trash reports item.added.
A move that leaves the recipient's masked address unchanged now stays
quiet — a share masks its own root, so the owner shuffling it around
their tree is invisible to the recipient and the event carried nothing.
Both ways a file can vanish were silent for anyone holding the folder
above it, so a third party's window kept showing a file that was gone
and 404'd on click.
A delete built its audience from the permission rows it removed, and a
file inside a shared folder has no grant of its own — only the folder
does — so the audience was empty. A move resolved its audience from the
entry's new path, and the GUI's Delete is a move to the owner's Trash,
where no recipient has a share.
Resolve the audience from where the entry was rather than from the
grants that went with it:
- Deletes also fan out to holders reaching the entry through an
ancestor, coalesced by parent so a subtree stays a couple of queries.
A holder covered by both passes is told once.
- Moves resolve both ends. Reaching both is item.moved, only the
destination item.added, only the origin item.removed.
Recipients are named by the path they knew, masked through their own
share rather than the owner's tree.
Browsers only allow documentPictureInPicture.requestWindow() from a
top-level document, and an app lives in an iframe, so an app calling it
gets NotAllowedError ("only allowed from a top-level browsing context").
The `document-picture-in-picture` token in the iframe's `allow` list does
nothing — it is not a policy feature the browser knows. Video PiP
(video.requestPictureInPicture) already works inside apps.
The GUI is the top-level document, so a new PictureInPictureService opens
the window for the app and fills it with an iframe of a page the app names,
which must come from the app's own origin (checked against the message's
origin, now carried on the IPC caller context). One window per app
instance; it closes with the app's window, and the app hears about a close
it didn't ask for. The window's opener is the GUI, so the page inside it
can reach its app's frame through parent.opener.frames and share objects
directly — a MediaStream included, which postMessage cannot carry (tracks
are not transferable between windows in Chromium).
puter.js gains puter.ui.requestPictureInPicture({ url, width, height,
onClose }) and puter.ui.exitPictureInPicture(), with docs.
Sharing a file with someone who already had it answered "Shared with
X", the same as a first share, so the dialog claimed to have done
something it had not.
The service already knew — it computes isNew to decide whether to
notify the recipient — but the flag stopped at the controller. It now
travels on share results only; a listing describes standing access and
says nothing about it.
Which of the three things happened is settled client-side, since the
mode each recipient holds is already on screen: created access, raised
or lowered it, or changed nothing. That keeps the previous mode off the
wire, and an older backend that omits isNew still reads as a share,
which is what these dialogs said before.
A recipient given "can edit & share" could not pass that level on: the
dialog offered it, the server refused it, and the refusal was a bare
403 Forbidden that reads as a bug. Handing out manage needs authority
over manage, which only the owner has — the refusal is right, the dead
end and the silence were not.
The dropdown now withholds it from anyone who does not own the item; a
row already set to it keeps it, so opening the dialog cannot downgrade
the owner's own grant, and a mixed selection follows its strictest item.
The server says why, and only to someone who can already share the item
— a stranger still gets the ACL's own safe error, which does not admit
the node exists.
Verified against a running server: a delegate grants read and write as
before, and manage now answers cannot_delegate_manage with a sentence
naming the owner as the one who can.
Below 480px the Files tab hides its directories sidebar, which was the only
entry point to Shared (a query, not a directory) and Trash (filtered out of
the Home listing). Home now carries a row for each; CSS shows them only at
the widths where the sidebar is hidden, using the complementary breakpoint so
the two never both show or both disappear.
The rows borrow the item markup for layout but aren't `.item`, so sorted
insert, selection restore, share-link selection and socket updates ignore
them. The footer count and keyboard select-all exclude them explicitly, and
the placeholder-removal sweeps leave them in place. They navigate on tap and
offer the same menu as their sidebar entry via the ⋯ button or long-press;
the Trash icon tracks empty/full alongside the sidebar's.
Also guard the `window.user.directories` lookup in renderDirectory: it is
undefined for some sessions, and since `puter://shared` doesn't look like a
path it always reached that branch, threw outside the try, and left the
spinner up with navigation stuck — from the desktop sidebar as well.
It sat on the icon box's corner, which is 5px outside the artwork on
every side, so the dot read as clipped — half of it hanging over empty
padding with the icon's own drop-shadow falling across it. Nudged in on
both axes: 7px on the desktop, 2px on the dashboard rows.
Review feedback: too big, and in the wrong place. It sat in the badge
cluster, which the dashboard pins to the row's top-left corner rather
than to the icon — and at 12px it dominated a 24px row icon.
Now a dot on the icon itself, lower-right: 9px on the desktop's 45px
icons, 7px on the dashboard's 24px rows. Anchoring to .item-icon rather
than to the badge cluster is what keeps it on the corner at both sizes.
Dropping the people glyph with it — unreadable at either size, and
colour was the signal the ticket asked for.
A shared file looked exactly like a regular one. The data to tell them
apart arrived with the readdir/stat share flag; nothing rendered it.
Adds the badge to both listings — UIItem (desktop, explorer windows,
file dialogs) and the dashboard's Files rows — fed from is_shared, and
keeps it in step with the share dialogs: both funnel every grant, mode
change and revoke through one render, so the badge follows without
waiting for a re-listing.
Inherited access is deliberately not badged. It is a state of the folder
that was shared, so marking every file inside would repeat one fact on
hundreds of items; the backend flag is direct-only for the same reason.
The icon (owner-shared.svg) and the strings (item_shared_by_you, in 40
locales) were already in the tree, unused — only the wiring was missing.
The blue ring is doing the work: list view shrinks badges to 8px, where
a glyph is illegible and the white circle the sibling badges use
disappears into the row.
Replace the Files tab's viewport-height sizing with flex-based layout sizing through the dashboard content chain. This keeps the internal file list within the visible content area on mobile browsers, preventing the bottom rows from being clipped when browser toolbars are shown.
Raised in review: could an event from another node re-trigger the
fan-out? Not today — broadcast carries outer.* and pubsub.* only, so
fs.* never crosses a node boundary, and the emitted outer.gui.* is
consumed on the peer by SocketService while ShareService listens to
fs.* alone, so nothing re-enters.
That safety is a property of what broadcast happens to replicate, which
is not this service's to rely on. The handlers now skip anything tagged
from_outside: the node that did the write has already told the audience,
and a second fan-out would only duplicate it.
A recipient's client keeps its cache fresh from fs events pushed over
their socket, and ShareService fans those out to holders — but only for
write, move and delete. A new entry emits fs.create.<flavor>, not
fs.write.file, and an in-place rename emits fs.rename; neither had a
listener, so a recipient watching a shared folder never learned that a
file appeared in it or was renamed. Part of why: those keys and
outer.gui.item.renamed were missing from the typed event map, so a
listener for them did not compile.
Delivering the event is only half of it. Paths were masked against the
entry itself, so item.added named a parent no cached listing was keyed
on, and the payload carried no dirpath, which is how the desktop finds
the container to render into — the event would have arrived and changed
nothing. Paths are now masked at the share the holder reached the entry
through, which is the address their own reads returned, and from_path on
a move and old_path on a rename travel the same way (dropped when the
move started outside the share, self-masked when the share is on the
entry itself, where the root already carries the new path).
Creates fire per entry, so an upload would have cost one share lookup
per file; they are coalesced by parent folder the way subtree deletes
already are. Measured on a 25-file burst into one folder: 25 lookups
before, 1 after. A holder with a share on both a folder and something
inside it is told once, by the nearer of the two.
stat() and readdir() return FSItemRead, so the is_shared the docs lead
with typechecks for TypeScript consumers rather than erroring on FSItem.
The docs said "you have shared", but the query has no issuer predicate:
a manage delegate's re-share sets the owner's flag too, which is the
useful answer and matches getShares().
Nothing invalidated the SDK entry cache on share or unshare — the socket
handlers only fire on item mutations — so is_shared, which now rides in
the cached entry, stayed stale for every consistency: 'eventual' read.
That includes the GUI's own listing refresh, which defaults to it, so a
badge would not have appeared until an unrelated write flushed the cache.
revoke-user-user withdraws a grant without touching the share index, so
the row outlived the access — invisible until now, because listSharesOf
filters against live grants, but the new flag reads the index and would
report a file as shared to nobody, permanently.
Drop the row where the grant goes. The alternative, filtering liveness on
the read side, is the per-entry work the flag exists to avoid.
Around 500 tests run through one seeded free-tier account, so the
per-tier windows were throttling the suite rather than anything it
tests — adding a single readdir was enough to trip fs:readdir-burst.
Resolve the seeded users to the unlimited policy, alongside the
subscription gate the harness already turns off for the same reason.
Test config only; no published limit changes.
Carry the flag into the v1 entry shape and add returnShares to stat(),
whose shares are mapped into the same Share objects getShares() returns.
returnShares joins the dedupe key and bypasses the entry cache in both
directions — a result carrying share data is never written to it, so a
later plain stat cannot serve other people's names from cache.
isShared on /fs/stat and /fs/readdir, is_shared on their legacy
counterparts, and return_shares now fills the shares array the legacy
stat has been stubbing with []. Null for entries the caller does not own,
so a share recipient is never told who else can reach the owner's files.
The share-to-wire mapper moves out of ShareController so both controllers
publish one shape.
Directory listings need a shared/not-shared flag per entry. Ask the share
index once per batch, chunked, rather than a query per entry, and answer
only for entries the caller owns so listing a foreign directory never
queries at all. Direct shares only — inherited access stays with
listSharesOf, which already reports it.
A peer server could only be reached by the invite code the signaller
minted for it, which is unknowable ahead of time and dies with the
server's socket. Any app that wanted a link to share in advance or reuse
had to run a registry of its own that maps a stable code to whatever
invite is live — and keep it live, since the signaller socket can drop
without the library saying a word (`onclose` was an empty function),
leaving a host serving an invite nobody can dial.
`serve({ name })` serves under a room name of the caller's choosing;
`connect(name)` dials it. A name is held by whoever serves it and free
once they stop; serving a held name from another identity rejects with
`name_in_use`, from the same identity it takes over. A connection to a
room nobody serves fails with `no_host`, so a lobby has a definite answer
to poll on instead of guessing between "not yet" and "gone".
`serve({ guestGrant })` and `server.setGuestGrant()` leave a guest grant
with the signaller, which hands it to every anonymous guest in the connect
reply; the connection redeems it before making its offer, so a guest with
no session gets relays without the app publishing the grant anywhere.
A server whose signaller socket drops now re-registers on its own with
backoff — under the same name, or a fresh code announced by the new
`reconnect` event — and pings the socket to keep idle proxies from cutting
it. It fires `close` (`replaced`, `name_in_use`) when it has to stand
down for good. Existing connections are peer-to-peer and never affected.
Signaller refusals reach the connection's `error` event as an Error with
a `code` next to the message. Keepalive replies and stray frames no longer
throw in the message handlers.
Co-Authored-By: Claude Fable 5 <[email protected]>
A share email lands on `/?shared=…`, and its recipient is signed out or
in a temporary session more often than not. Password login reloads the
same URL, so the link came back with it — but an OIDC login leaves the
origin and returns to a URL the backend builds from a whitelist of bare
paths. `return_to` was a pathname only, and `/` wasn't on the list, so
the recipient came back signed in on the Dashboard's Apps tab with
nothing to say what had just been shared with them.
`shared` now travels with the path. The GUI sends it along with the
return path; the backend accepts it as the one parameter a `return_to`
may carry, and only values shaped like the masked share path the mail was
built from — everything else rejects the whole value, the path is still
matched as a raw string so a protocol-relative one can't smuggle an
origin through, and the query is rebuilt rather than reflected. The items
ride onto the error page too, so a failed attempt retries on the link
instead of losing it.
The root joins the whitelist for this, but only when it names something:
on its own it is where the flow already lands.
src/gui/src/helpers was mostly snake_case, disagreeing with itself and
with the camelCase file convention in AGENTS.md. Rename the 45 offenders
with git mv and repoint every import specifier at the new paths.
Files only — exported symbols are unchanged. applyItemAddedToContainers.js
still exports apply_item_added_to_containers and no call site is edited
beyond its import line; those identifiers cross module boundaries and some
hang off window, so renaming them is a separate, riskier change.
* Land share-email links in the Dashboard's Shared view
A share email's links opened the item on the desktop, and "Open Puter"
went to the bare origin — the recipient arrived on Home with nothing to
say what had just been shared. Every link now lands in the Dashboard's
Files tab, on Shared, with the shared items selected.
Each named file still links to itself. "Open Puter" carries every item
in the mail (?shared=a&shared=b), so the whole batch lands highlighted;
the digest records now keep each item's masked path for that. The
button's href is rendered raw like the item links, so `=` and `&` read
the same in the html and text parts, and the unsubscribe link is built
from a separate origin value.
On the GUI side `/?shared=` boots the dashboard rather than the desktop;
`/desktop?shared=` keeps opening the item in place. The Files tab
selects the rows by uid, which survives a rename. A share only reaches a
real account, so a share link never mints a temp user and an existing
temp session is asked to sign in first, as the desktop already did. The
address-bar cleanup both shells need moves into a helper.
* Keep the share email's button link within what mail clients tolerate
The "Open Puter" link names every item in the mail, capped at twenty. But
a single item's parameter is ~150 characters once the owner, uuid and an
encoded name are in it, so twenty of them run to several kilobytes — past
the ~2000 characters where older mail clients cut a URL off or stop making
it clickable — and the count alone couldn't do what its comment promised
for the mail's primary button.
Add a length budget beside the count: items go in, in digest order, only
while the whole link stays under it, so the button always works and the
first items are the ones highlighted. A single item always fits.
* Keep a share link's own item however long its name runs
`shareDeepLink` now builds through `sharedViewLink`, whose length budget
applied to the first item too: a parameter that alone overran it was
dropped, and the link came out as a bare `?shared=`. A name of a few
hundred characters — the GUI allows five hundred, and encoding triples
every non-ASCII one — was enough, so that item's own link in the mail
landed on Shared with nothing picked out, where it used to open the item.
The first item now always goes in; the budget only decides how many more
join it. One long link is still the item the mail is about, and it is no
worse than a bare origin for the clients that truncate it.
Sharing was one item at a time: the only way to give someone four files
was to open the dialog four times. A multi-selection now offers Share in
its context menu and in the mobile selection bar, and UIShareModal takes
a list of items.
With several items the access list folds into one row per person rather
than repeating per file, so a grant, a mode change or a revoke is one
decision about a person. A row says what it can't otherwise show: how
much of the selection the person reaches ("On 2 of 4 items", with an
"Add to all" that extends them), a mode select that rests on a
placeholder when their grants disagree rather than presenting one item's
mode as the batch's, and inherited grants left uncontrollable where they
belong. Changing a mode touches only the items the person already holds
— nothing here widens access without saying so.
Requests are chunked to the documented 50-items-per-request cap, and a
selection past it skips the per-item listing instead of firing one
request per file on every refresh.
The eligibility rule the Share entry already used moves into a shared
can_share() helper, since the multi-select menu needs the same answer
for every row.
Merge the .md extension case into the plain-text branch so it suggests ['editor', 'code'] instead of ['markus', 'editor', 'code']. Update the related test to use 'viewer'/'png' as the built-in guard example since 'markus'/'md' no longer applies.
- Add modelLookupNames() and route every provider's list() through it so
repeated or self-referential aliases can't double-list a model.
- Stop the chat/image/video drivers' #buildModelMap from writing through
to the module-level catalog constants (ids/aliases accumulated across
instantiations); bucket copies preserve the models() wire shape.
- Remove self-aliases and exact duplicates from the claude, deepseek,
groq, mistral, and openai catalogs; fold the duplicated
gemini-3.7-flash entry — this corrects the live cached-token price
from 8 to 7.5 and the knowledge date to 2026-03 (the previously
effective first entry carried stale values).
- ClaudeProvider: derive default max_tokens from the resolved entry
instead of a second name-based lookup that capped dated ids at 4096.
- Add cross-provider catalog invariants (modelCatalogs.test.ts) with a
disk-scan registration guard, plus regression tests for catalog
non-mutation, alias-dedup routing, wire shape, and max_tokens ceilings.
Co-Authored-By: Claude Fable 5 <[email protected]>
A share email named the file but had nowhere to go: the only link was "Open
Puter", and finding what someone shared meant hunting for it under Shared. Each
named file in the digest now links to itself, and a notification covering a
single item points at that item.
The link carries one parameter, the masked path a recipient is already given:
https://puter.com/?shared=%2Falice%2F<uuid>%2Freport.txt
Its second segment is the uuid, so there is no second copy of it to disagree
with the path, and the GUI can still find the entry when a rename has left the
name segment stale - it stats the path, then falls back to the uuid.
Built from the owner, uuid and name rather than from `ResolvedShare.path`.
That path is masked for whoever made the request, and the issuer owns the
entry, so it comes back as the owner's *real* path - mailing it would tell the
recipient which folders the owner keeps things in, which is the one thing
masking exists to prevent. A test asserts the real path never reaches the mail.
`digestLines` now returns `lead`/`items`/`trail` beside `what`, so the template
can put an anchor around each name while Handlebars keeps escaping the names
themselves; the URL is machine-built from the configured origin and one encoded
path, so it stays literal. Concatenating the parts reproduces `what` exactly,
which a test pins - the linked and sentence forms must not describe different
shares.
Notifications carry the masked path rather than a URL: the recipient is already
in the GUI, which opens the item in place instead of reloading. Only a
single-item notification gets a target; folding into a group drops it rather
than picking one of five.
In the GUI, `?shared=` joins `?download=` and `?app=` as a param that keeps the
desktop booting at `/`, and the handler reuses the `/@user` public-folder flow -
extracted to `open_path_target`, which carried a TODO asking for exactly this -
so a file opens in its associated app and a folder in an explorer window. The
param is stripped from the address bar first, so a reload lands on the desktop
rather than opening the item twice.
Invites are deliberately not linked: there is no account to route to yet, and
the invite's own call to action is to create one.
Rolling-deploy safe: a digest entry queued before this has `names` and no
`items`, and still flushes - without links. New entries write both, so a node
on the previous build can flush them too.
Both were left as follow-ups on the previous commit.
Thirteen `puter.perms` method pages went when the surface collapsed onto
`request(resource, details)`, and `requestAppData` moved to `/Perms/appData`.
All fourteen had shipped, so an external link or a bookmark landed on nothing.
The build already generates meta-refresh redirects from a map; they are entries
in it now. Pages that only ever existed on the branch that removed them are
deliberately absent — nobody can hold a link to a URL that was never published.
Six documented APIs annotated a code block with a playground id but had no
example file behind it, so the build warned on every one and the Try-it link
resolved to nothing: `fs.share`, `fs.unshare`, `fs.listShared`, `fs.getShares`,
`ai.txt2speech` with Speechify, and `ui.showFeedbackDialog`. The files are the
documented blocks themselves, extracted rather than rewritten, so the example
and the page it appears on cannot drift. Each is indexed in `examples.js` beside
its siblings.
The build now runs clean: 12 warnings to none.
`app-root-dir:` was listed among the raw permission strings, but it reads as
nothing during a permission check - the rewriter yields the sentinel outside a
grant, so `check()` reports it ungranted even once it is and `request()` prompts
every call. Both contradict what the same page promises. The `'appRootDir'`
resource is the supported path and asks the server instead; the list now says so
rather than implying the string behaves like its neighbours.
The playground listed no perms examples at all: six files existed but nothing
referenced them in examples.js, so a freshly-reshaped API shipped with nothing
runnable. Adds a Perms group after UI, matching the sidebar's order, and two
examples for the features that had none - one prompt covering several resources,
and check() deciding whether to prompt.
2026-08-21 10:20:05 -04:00
1719 changed files with 322776 additions and 42008 deletions
Guidance for AI coding agents working in this repository. Read this before making changes. FOLLOW GUIDANCE AS CLOSELY AS POSSIBLE. If you think the guidance is wrong, raise an issue or flag a maintainer — don't just do what you think is right. This is the source of truth for how we write code, tests, and docs in this repo.
Guidance for AI coding agents working in this repository, and the source of truth for how we write code, tests, and docs here. Read it before making changes. FOLLOW GUIDANCE AS CLOSELY AS POSSIBLE. If you think a rule is wrong, raise an issue or flag a maintainer instead of doing what you think is right.
## Documentation Index
Use these as the source of truth before exploring further:
- [README.md](README.md) — project overview and quickstart.
- [doc/contributing-apis.md](doc/contributing-apis.md) — adding and maintaining public APIs end to end (backend surface → puter.js → types → docs → tests). Follow it for any API work.
- [doc/pagination.md](doc/pagination.md) — the one pagination convention for list APIs (limit/cursor/offset/includeTotal, envelope shape, cursor semantics).
- [doc/alarms.md](doc/alarms.md) — raising alarms and picking a severity (what pages, what only gets recorded), plus the config that routes them.
- [CONTRIBUTING.md](CONTRIBUTING.md) — contributor entry point and PR conventions.
- [SECURITY.md](SECURITY.md) — how to report vulnerabilities (do not file them publicly).
- [BUG-BOUNTY.md](BUG-BOUNTY.md) — bounty program scope.
- [TRADEMARK.md](TRADEMARK.md) — trademark usage.
@@ -26,14 +26,16 @@ These apply everywhere — backend, puter.js, and GUI.
### Language & files
- Write ES modules, not CommonJS — we transpile and build as needed.
- TypeScript preferred for new files in the backend and extensions; convert existing JS there opportunistically when you're already touching a file. The GUI and puter.js are plain JavaScript — don't introduce TypeScript files in them. In puter.js, type with JSDoc instead (see the puter.js section for what must be typed).
-**Reuse before adding.** Search for an existing type, helper, or implementation and extend it; only add a new one when nothing suitable exists.
- Make new types findable: descriptive `PascalCase` names, exported from the obvious entry point. A type used from many places belongs in the owning module's `types.ts` (e.g. [src/backend/controllers/types.ts](src/backend/controllers/types.ts)) rather than bloating a logic file; a type with a single consumer can stay next to it.
- Naming: `camelCase` for variables/functions, `PascalCase` for classes and files containing a class (`AuthService.ts`). **Prefer `camelCase` for all new code** — new local variables, parameters, functions, and internal object properties. `snake_case` is reserved for identifiers that are part of an external contract: wire/JSON keys sent to or received from the backend, stable API error codes, public option names that already ship as `snake_case`, and established `puter_*` namespaced fields. Don't rename those (it's a breaking change), but don't introduce new `snake_case`alongside them either — a camelCase local can carry a value into a`snake_case` wire key (`{ operation_id: operationId }`).
- TypeScript preferred for new files in the backend and extensions; convert existing JS there opportunistically when you're already touching a file. The GUI and puter.js are plain JavaScript — don't introduce TypeScript files in them.
-In plain-JS files, typing with JSDoc (`@type`/`@param`/`@returns`, `@typedef` for shared shapes, using the TypeScript type system) is encouraged. API types must not be `unknown` or untyped `...args`: spell out the real parameter and return shapes, unless the value passes through transparently to an upstream layer that owns its type. puter.js has stricter rules ([below](#types)).
- Make new types findable: descriptive `PascalCase` names, exported from the obvious entry point. A type used from many places goes in the owning module's `types.ts` (e.g. [src/backend/controllers/types.ts](src/backend/controllers/types.ts)); a type with a single consumer can stay next to it.
- Naming: `camelCase` for variables and functions, `PascalCase` for classes and files containing a class (`AuthService.ts`). **Prefer `camelCase` for all new code**, including parameters and internal object properties. `snake_case` is reserved for external contracts that already use it: wire/JSON keys, stable API error codes, public option names that already ship as `snake_case`, and established `puter_*` namespaced fields. Don't rename those (it's a breaking change), and don't add new `snake_case`beside them; a camelCase local can carry a value into a wire key (`{ operation_id: operationId }`).
### Comments
Keep comments light; prefer self-documenting code. Comment only when the _why_ is non-obvious or a usage detail would trip the next reader. Use `//` for single lines and `/** ... */` JSDoc when it genuinely needs more — if a comment runs long, it's probably too long. Don't restate the code and don't reference the current task, PR, or version — those rot. **No ticket references** (`PUT-1234`, `// fix for FOO-99`) in code, comments, or test names; describe the why in domain terms, not project-management terms. Use plain ASCII `-` in comment section dividers (`// -- Section --`), never box-drawing characters.
Prefer self-documenting code. Comment only when the _why_ is non-obvious or a usage detail would trip the next reader. **A comment is a sentence or two**: one or two lines of `//`, a few of `/** ... */` JSDoc. State the constraint and stop. Don't restate the code, narrate history ("used to swallow the failure, which meant…"), argue the design, or explain parameters the signature already shows. Reasoning that needs paragraphs belongs in a design doc.
Don't reference the current task, PR, or version; those rot. **No ticket references** (`PUT-1234`, `// fix for FOO-99`) in code, comments, or test names: describe the why in domain terms. Section dividers use plain ASCII (`// -- Section --`), never box-drawing characters.
### Security & privacy
@@ -45,98 +47,148 @@ Before opening a PR, scan the diff for:
When in doubt, return less. Auth-, permission-, or data-export-related changes deserve an explicit callout in the PR description.
Commit messages and PR descriptions never credit anyone or mention a bug report. For security fixes, state what the change does mechanically ("scoped tokens do xyz now"), not the vulnerability or how it could be abused.
### Reuse and abstraction
- **Search before you build.** Before writing a type, helper, cache/TTL map, retry, lock, pagination, validator, serializer, error mapper, host/email normalizer, or provider adapter, grep `src/backend/util/`, the owning layer, and `extensions/` for one that exists, and extend it instead of adding a parallel copy. If you find two copies, consolidate them or flag it. Before opening the PR, check the diff for new helpers that duplicate existing ones.
- **One path per operation.** Single-item variants call the batch version. Legacy and v2 endpoints share one service method. A second entry point (OIDC, WebDAV, admin, cron) calls the same service as the first instead of re-implementing it.
- **No abstraction without a second caller.** No base class, interface, factory, registry, decorator, or option bag with one implementation. No wrappers that only forward, no interface methods nobody calls, no methods only tests call.
- **Variants are data.** Providers or models that differ only in constants (base URL, prices, key names) are entries in a table read by one implementation, not one file each.
### Hot paths
- No per-row queries or awaits in loops: use the store's batch method (add one if missing) or [src/backend/util/concurrency.ts](src/backend/util/concurrency.ts).
- Bound everything: queries get `LIMIT`/pagination, in-memory maps get eviction, outbound calls get a timeout and a size cap.
- Build clients, catalogs, and config-derived lookups once, not per request.
- Listeners on fleet-wide events (`fs.write.file`, route lifecycle) return before any I/O for requests they don't concern.
### Working rules of thumb
- **Run it, don't just compile it.** "It type-checks" is not "it works." Exercise the code path end-to-end at least once.
- **Read the neighbors before writing.** Match the shape of similar things already in the tree. If you think the existing pattern is wrong, raise it — don't quietly diverge.
- **Test new behavior.** Every new function, endpoint, driver method, or logic branch gets a test; every bug fix gets a regression test that fails before the fix. If something is genuinely hard to test, skip it but say so in the PR.
- **Boy Scout Rule, proportional to the change.** Fix the obvious typo or dead import in files you're already touching; don't ride a refactor along with a bug fix.
- **Understand what you commit.** AI assistance is fine; shipping code you couldn't defend in review is not.
- **Boy Scout Rule, proportional to the change.** In files you're already touching, fix the typo, the dead import, the missing test, the bit you had to read twice. Don't ride a refactor along with a bug fix.
- **Understand what you commit.** AI assistance is fine; shipping code you couldn't have written, debugged, or defended in review is not.
- **A limit change is not done until the docs change with it.** Every rate limit, concurrency cap, quota, and allowance in the code is published in [src/docs/src/rate-limits-and-quotas.md](src/docs/src/rate-limits-and-quotas.md) — an undisclosed limit is one developers discover as a service failure. If a PR moves any of these numbers, the same PR updates that page. The numbers live in `src/backend/controllers/fs/limits.ts` (filesystem), `src/backend/drivers/util/aiLimits.ts` (all AI drivers), per-driver `rateLimit`/`concurrent` configs, and `src/backend/data/subPolicies/` (free-tier allowances).
---
## Local development
To test a local Docker build, use the gitignored `docker-compose.override.yml` described in [Self-Hosting → Building from source](doc/self-hosting.md#building-from-source-instead-of-pulling). Keep local build settings there, not in `docker-compose.yml`.
When budget checks block unrelated local API tests, you may set `"unlimitedMetering": true` without further approval. Merge it into the gitignored `config.json` (`npm start`) or `puter/config/config.json` (Docker) and restart Puter. It covers every account on that instance, guests included, and usage is still recorded. Keep normal settings when testing budget or subscription enforcement, and leave shared defaults unchanged.
---
## Backend
A layered stack with explicit dependency injection: each layer depends only on the layers beneath it, receives them through its constructor, and`PuterServer` ([src/backend/server.ts](src/backend/server.ts)) wires the whole thing together. [doc/architecture.md](doc/architecture.md) is the full reference.
Controllers → drivers (optional) → services → stores → clients, all configured from `IConfig`. Each layer depends only on the layers beneath it and receives them through its constructor;`PuterServer` ([src/backend/server.ts](src/backend/server.ts)) wires them. [doc/architecture.md](doc/architecture.md) is the full reference.
| **Controllers** | [src/backend/controllers/](src/backend/controllers/) | Route handlers: parse/validate input, per-route gates via `RouteOptions` (auth, subdomain, rate limit, body parsers), call services, format responses. |
| **Drivers** | [src/backend/drivers/](src/backend/drivers/) | Optional RPC-style handlers on `/drivers/*`; thin shells that validate inputs and call services/stores. |
| **Services** | [src/backend/services/](src/backend/services/) | Business logic. Assume the caller is already authenticated/authorized. |
| **Stores** | [src/backend/stores/](src/backend/stores/) | Persistence; wraps clients in the domain shapes services consume. |
| **Clients** | [src/backend/clients/](src/backend/clients/) | Adapters for external/internal services (sql, redis, s3, email, event bus). Protocols, not domain concepts. |
| **Config** | `config.*.json` → `IConfig` | Flat, typed config object every layer receives at construction. |
A public API can be a controller or a driver. Prefer a controller when you need fine-grained control over routes and gates; [doc/contributing-apis.md](doc/contributing-apis.md#controller-or-driver) has the decision guide.
A public API can be exposed through either a controller or a driver — both are supported; prefer a controller when you need fine-grained control over routes and gates. [doc/contributing-apis.md](doc/contributing-apis.md) has the decision guide with links to the decorators and middleware for each.
Layer rules:
Cross-layer rules:
- **Don't reach across layers.** Controllers don't poke clients; services don't register routes. If you want to, the abstraction is wrong — fix the abstraction.
- **Don't reach across layers.** Controllers don't poke clients; services don't register routes; lower layers never import from controllers. If you want to, the abstraction is wrong; fix the abstraction.
- **Gates run at the edge.** Controllers and drivers validate input and apply auth gates; services assume the caller is already authenticated and authorized.
- **Don't call sideways within a layer for code reuse.** Two services needing the same logic means a util/helper, not a service-to-service dependency.
- **Prefer explicit arguments over`Context` (ALS).** Reach for [Context](src/backend/core/context.ts) only for genuinely request-scoped values that would otherwise thread through many layers — today mostly `actor` and `req`.
- **A table's store owns every query against it.** Services, controllers, and extensions don't run raw SQL/redis against a table that has a store; add the store method so cache invalidation stays with the write.
- **Drivers and controllers stay thin.** Domain rules a second entry point needs (signup, app CRUD, worker deploy, AI routing/billing) live in a service, not in the first driver or controller that needed them.
- **Prefer explicit arguments over [`Context`](src/backend/core/context.ts) (ALS).** Use it only for request-scoped values that would otherwise thread through many layers; today that's mostly `actor` and `req`.
### Extensions
[extensions/](extensions/) parallels the layered stack and is for **non-crucial parts of the system** — Puter still works with the extension removed. If core needs to call it, it belongs in core, not an extension (see [whoami](extensions/whoami.ts) as the cautionary example). The `extension` global ([src/backend/extensions.ts](src/backend/extensions.ts)) exposes:
-`extension.registerClient/Store/Service/Driver/Controller(name, Class)` for first-class additions.
-`extension.on(event, handler)` and `extension.get/post/put/delete/patch/use(path, opts?, handler)` for the lightweight common case. `opts` is the same `RouteOptions` controllers use.
-`extension.import('client' | 'store' | 'service' | 'controller' | 'driver')` — lazy proxy to instantiated core objects. `extension.config` exposes live config.
Follow the same layered structure inside an extension — unless it only needs a few route handlers, in which case the lightweight helpers are enough on their own.
[extensions/](extensions/) is for **non-crucial parts of the system**: Puter must still work with the extension removed. If core needs to call it, it belongs in core ([whoami](extensions/whoami.ts) is the cautionary example). Inside an extension, follow the same layered structure, unless it only needs a few route handlers, in which case the `extension.get/post/...` helpers are enough on their own. The `extension` API is in [doc/architecture.md](doc/architecture.md#extension-api).
### Backend tests
- Vitest; test files sit next to the code they test (`*.test.ts` / `*.test.js`). Run with `npm run test:backend`.
- **Mock data, not methods.** Stub inputs (fixtures, fake rows, payloads), not the function under test or the layer beneath it — over-mocking produces tests that pass while production breaks. If you must mock, mock at a real boundary (a client/external service).
- **Prefer the test server over mocking deps.** `setupPuterTestEnv()` in [src/backend/testUtil.ts](src/backend/testUtil.ts) boots a fully in-memory backend; hit a real database/client shape where reasonable — integration shapes catch what mocked unit tests miss.
- **Test code, not docs.** Never write a test that reads a file under `src/docs/` and asserts on its wording or numbers. Docs are kept in step by the PR (see the limits rule above) and checked in review; a test that greps a markdown page fails on every rewording and verifies nothing about behavior.
---
## puter.js (the SDK)
[src/puter-js/](src/puter-js/) is the public SDK. It ships live from `https://js.puter.com/v2/` with no version pinning — every existing app picks up changes immediately. Treat every observable behavior (signatures, response fields, error codes) as something a production app depends on.
[src/puter-js/](src/puter-js/) is the public SDK. It ships live from `https://js.puter.com/v2/` with no version pinning, so every change reaches every existing app at once; see [Rule zero](doc/contributing-apis.md#rule-zero-dont-break-callers).
Layout: SDK modules in [src/puter-js/src/modules/](src/puter-js/src/modules/) (one file or directory per area — `FileSystem/`, `kv/`, `ai/`, …), shared plumbing in [src/puter-js/src/lib/](src/puter-js/src/lib/), generated (gitignored) type declarations in `src/puter-js/types/`, API tests in [src/puter-js/tests/api/](src/puter-js/tests/api/), UI e2e tests in [src/puter-js/tests/e2e/](src/puter-js/tests/e2e/), developer docs in [src/docs/](src/docs/).
Language & typing: puter.js source is plain JavaScript — never TypeScript files — typed via JSDoc. **The JSDoc is the source of truth for the SDK's types.**`src/puter-js/types/` is `tsc --emitDeclarationOnly` output: the SDK build (`npm run build` in `src/puter-js`) generates it, the npm tarball ships it so TypeScript consumers get declarations, and git ignores it — it is never committed and never edited by hand. `npm run check:puterjs:types` generates it in CI and type-checks the result without `skipLibCheck`. The one hand-written declaration file is [src/puter-js/index.d.ts](src/puter-js/index.d.ts), which decides what is public and re-exports the generated names.
Every SDK change carries all five of these, or the PR is incomplete. [doc/contributing-apis.md](doc/contributing-apis.md) has the steps for each.
Declare a shape where it belongs, and reference it with an `import(...)` type from elsewhere. A shape more than one file needs lives in the module's `types.js`; a shape shared across modules lives in [src/puter-js/src/lib/types.js](src/puter-js/src/lib/types.js); a shape with one consumer can stay next to it:
1.**Backward compatibility**, unless a maintainer explicitly signs off on a break ([rules](doc/contributing-apis.md#maintaining-an-existing-api)).
2.**Tests** in the cross-platform API suite, or the Playwright harness for desktop-rendered `puter.ui.*` ([steps](doc/contributing-apis.md#6-tests)).
3.**Docs** in [src/docs/src/](src/docs/src/) that match the implementation exactly ([steps](doc/contributing-apis.md#5-docs), [writing rules](#developer-docs)).
4.**Types**, per the rules below.
5.**Error handling**: `{ message, code }` with stable `snake_case` codes, as in [modules/kv/](src/puter-js/src/modules/kv/) ([steps](doc/contributing-apis.md#3-puterjs)).
### Types
puter.js source is plain JavaScript typed via JSDoc, and **the JSDoc is the source of truth for the SDK's types**. `src/puter-js/types/` is `tsc --emitDeclarationOnly` output: the SDK build (`npm run build` in `src/puter-js`) generates it, the npm tarball ships it, and git ignores it. Never commit or hand-edit it. `npm run check:puterjs:types` generates it and type-checks the result without `skipLibCheck`; run it after any type change. The one hand-written declaration file is [src/puter-js/index.d.ts](src/puter-js/index.d.ts): it decides what is public and re-exports the generated names, so name a new type there if consumers should be able to import it.
- Public (exposed) methods carry JSDoc types for parameters and return value, with one `@overload` block per accepted call form; those overloads _are_ the published signature. Typing private helpers is at your discretion; annotate where it helps the next reader.
- Tag members `@internal`, not `@private`, to strip them from the generated declarations.
- Declarations must match runtime behavior exactly. A wrong type is worse than a missing one.
Declare a shape where it belongs and reference it elsewhere with an `import(...)` type. A shape more than one file needs lives in the module's `types.js`; one shared across modules lives in [src/puter-js/src/lib/types.js](src/puter-js/src/lib/types.js); one with a single consumer can stay next to it:
Use `@typedef {Object}` + `@property` for any shape whose fields need documenting — it is the only JSDoc form that carries a doc comment per field into the generated declaration. Keep the inline object-literal form for small internal shapes with nothing to say about each field, and prefer `unknown` over `*`:
Use `@typedef {Object}` + `@property` for any shape whose fields need documenting; it's the only JSDoc form that carries a per-field doc comment into the generated declarations. Use the inline form for small internal shapes with nothing to say per field, and prefer `unknown` over `*`:
Public (exposed) methods must carry JSDoc types — parameters and return value — with one `@overload` block per accepted call form, since those overloads *are* the published signature. Unexposed/private helpers are typed at the contributor's discretion: annotate where it helps the next reader, and either way keep them clean. Members tagged `@internal` are stripped from the generated declarations, so use that tag rather than `@private` to keep something off the public surface.
---
Typing in JS files is encouraged: annotate with JSDoc `@type`/`@param`/`@returns` using the TypeScript type system, and define shared shapes with `@typedef`. API types must not be `unknown` or untyped `...args` — spell out the real parameter and return shapes; the only exception is values passed through transparently to an upstream layer that owns their type. For example:
## Developer docs
```js
/**
* @typedef {{key:string, value: unknown}} KVEntry
*/
[src/docs/src/](src/docs/src/) is the published puter.js documentation: one reference page per method (`<Area>/<method>.md`, [steps](doc/contributing-apis.md#5-docs)) and recipes in [src/docs/src/recipes/](src/docs/src/recipes/).
/** @type {KVEntry[]} */
letentries=[];
```
### Page structure
Every SDK change carries all five of the following — a puter.js PR missing one is incomplete:
The reference has two kinds of page:
1.**Backward compatibility.** Mandatory unless a maintainer explicitly signs offon a break. Existing call signatures keep working (including both positional and options-object forms where a method supports them); new parameters are optional with defaults that preserve old behavior; never rename or repurpose existing params, response fields, or error codes. New parameter names are `camelCase` (existing `snake_case` stays for compatibility). Say in the PR how existing callers are unaffected.
2.**Tests.** Add or extend a suite in [tests/api/suites/](src/puter-js/tests/api/suites/) (`<area>.suite.ts`; register new suites in `suites/index.ts` — no globbing). One suite runs unchanged on node, browser, and workerd via `npm run test:puterjs`; never write a per-platform test. The runners execute the **built** bundle — run `npm run build:workerLib` after SDK changes or the suite silently tests stale code. For `puter.ui.*` methods rendered by the desktop, use the Playwright e2e harness instead — see [src/puter-js/TESTING.md](src/puter-js/TESTING.md).
3.**Docs.** New or changed APIs update [src/docs/src/](src/docs/src/): the method page (`<Area>/<method>.md`, with frontmatter and a runnable example) and the area overview when the surface changes. Docs are the contract users code against — signatures, defaults, and return shapes must match the implementation exactly.
4.**Types.** Type the change in JSDoc on the implementation, then run `npm run check:puterjs:types` to confirm it still produces declarations that type-check. Name any new type in [src/puter-js/index.d.ts](src/puter-js/index.d.ts) if consumers should be able to import it. Declarations must match runtime behavior exactly — a wrong type is worse than a missing one.
5.**Error handling.** Reject/throw `{ message, code }` objects with stable `snake_case` codes, matching the existing modules (see `KV.js`). Validate cheap preconditions client-side before making the network call; pass backend errors through unchanged rather than swallowing or re-wrapping them. Error codes are API surface — changing one is a breaking change.
- **API overview pages** (`<Area>.md`, such as [KV.md](src/docs/src/KV.md)) give a quick top-level picture of what the API is for and what it can do, with short examples and a list of its functions that links every function page in the area. Leave out the details. The first sentence of the intro says what the API is about. This is a judgment call too: when the API depends on a Puter concept the reader may not know, such as Teams, the first sentence can name it and the sentences after it explain it.
- **Function pages** (`<Area>/<method>.md`) hold the details: parameters, defaults, return values, errors, limits, and edge cases.
[doc/contributing-apis.md](doc/contributing-apis.md) walks the full lifecycle of adding an API across backend + SDK.
An overview page answers "what is this API and is it what I need?", and a function page answers "how exactly does this call behave?". A change to one function usually only touches that function's page, so a new `kv.list()` option goes in `KV/list.md` without a matching update to `KV.md`. Don't copy a function's options, limits, or edge cases onto the overview page for completeness. Where a detail goes is a judgment call, not a hard rule: update the overview when a change affects how someone would describe the API as a whole.
When you add a page, add it to [src/docs/src/sidebar.js](src/docs/src/sidebar.js) under its area, or it won't show up in the navigation. When you add a runnable example, add its HTML to `src/docs/src/playground/examples/<slug>.html`, register the slug in [src/docs/src/examples.js](src/docs/src/examples.js), and link the code block to it by putting the slug after the language with a semicolon (` ```html;kv-set `).
### Writing docs
These apply to reference pages and recipes alike.
- **Document the developer-facing side only.** The reader is building on top of puter.js, so cover what affects their code: signatures, defaults, return shapes, errors, limits, and behavior they can observe. Leave out internal workings (which service handles the call, storage layout, caching, retries) unless they change what the developer has to do. [rate-limits-and-quotas.md](src/docs/src/rate-limits-and-quotas.md) is the exception: it publishes every limit, including timeouts and caps that come from how the backend works.
- **Describe the current state.** Docs aren't a changelog. Write how the API behaves now, without "now", "no longer", "existing code is unaffected", or other wording that compares it to an older version.
- **Verify before you document.** Run the calls you describe against a running Puter instead of inferring behavior from the source.
- **Write plainly.** Use the literal words a developer would say out loud, with contractions and everyday words. No idioms or figurative verbs ("walk away from something shared with you" → "remove your own access", "nothing to page through" → "without pagination"). No formal register ("present only while more pages remain" → "includes a `cursor` if there are more pages to load"). Prefer dev terms such as atomic, concurrent, and insertion order.
- **State the rule, then its consequence, in short sentences.** No metaphor in place of a rule. Name a concrete action ("you can create any files and folders inside it") over an abstract permission ("yours to organize freely"). Cut a sentence that only repeats the next one.
- **Describe behavior directly.** No quoted inner-voice phrases. Write "`isNew` is `true` when the person did not have access before", not "this tells 'I just gave this to someone' from 'they already had it'".
- **Keep references easy to follow.** Name what a list or code block belongs to in the sentence directly above it. Name a thing once and keep that name. Introduce an actor as "a user" before giving them a role: "A user can create a team. The user who creates the team becomes its owner."
- **Sentence mechanics.** Never start a sentence with inline code: write "To store data, use the [`set()`](/KV/set/) method." Link every inline mention of an API to its page, every time. No em dashes, and no colons or semicolons mid-sentence; a colon that introduces a code block is fine.
- **Show the correct way.** No "don't" and no wrong-way-first examples, in recipes and playground examples alike. Mention a wrong approach only when developers already hit it in practice, and state how it fails as a fact: "`add()` reads a plain object as a path map, so the call rejects with …".
### Recipes
Recipes are tested, copy-pasteable patterns for a task, one layer above the per-method reference, often combining several APIs. Agents find them through the `## Recipes` section of `llms.txt`.
- **Files.** One `.md` per recipe in [src/docs/src/recipes/](src/docs/src/recipes/), with `title`, `description`, `tags`, and optional `order` front matter; they're picked up automatically. Tags must exist in [src/docs/src/recipe-tags.js](src/docs/src/recipe-tags.js) or the build fails. Quote a `description` that contains a colon followed by a space. Every top-level `.md` in that directory is built as a recipe, so keep other markdown out of it.
- **Title.** Short, Title Case, starts with a verb, and leaves out "to Your App" ("Add Team Support", "Deploy Workers Programmatically"). The slug is the title in kebab case, with no API-name prefix. In `llms.txt` an agent sees only the title and description before deciding to open a recipe, so word them to match the task the reader is trying to do.
- **Description.** Written for someone who has never heard of Puter. Start with "Learn how to", put the action first, and say what the reader's app gains: "Learn how to add file sharing to your app with Puter.js, so users can share files in their Puter account with other people." No API names, no mechanism, no list of example cases, and no "not just …" contrast.
- **Intro.** Explain the situation and why you'd do this, tied to something the reader already knows ("`puter.kv` is your database in Puter.js"). No "Use this when" bullet list.
- **Structure.** Get to the first working call as early as possible, then add validation, rate limits, and sign-in after it. Explain a Puter concept the first time it appears, such as what `me.puter` is or that `puter.workers.exec()` opens the Puter sign-in window. Split recipes by what the reader needs, not by technique, and give a family of recipes a shared tag.
- **Link to the reference for full option lists.** Mention only the options the recipe uses, then link to the function page for the rest ("All the sort options are listed on [`puter.fs.readdir()`](/FS/readdir/)."). A copied list of options, rules, or scopes goes stale when the reference changes.
- **Limits.** Mention a limit only when it's the reason for a pattern the recipe uses, such as one wildcard subscription instead of one per key, and link to [rate-limits-and-quotas.md](src/docs/src/rate-limits-and-quotas.md) or the function page for the number. Leave out limits that code following the recipe never reaches.
- **Code.** Platform-neutral: just the code, with top-level `await`. No `<script>` or `<html>` wrapper, no IIFE.
- **Tradeoffs.** Justify a choice with one scenario the reader can picture right away, in about two short paragraphs, or fold each point into the section where it matters. The description states the benefit only.
- **Notes.** Leave out `## Notes` by default. Use it only to point to an architecturally different approach. A limit the recipe needs goes in the section it applies to, and other facts belong on the linked reference page.
---
@@ -144,7 +196,7 @@ Every SDK change carries all five of the following — a puter.js PR missing one
[src/gui/](src/gui/) is the Puter desktop: deliberately plain JavaScript + jQuery with HTML-string templates. Don't introduce a UI framework or a new rendering pattern.
The guiding rule here is **conformity over novelty** — match the existing design and code structure even where you'd personally choose differently. A visually or structurally divergent addition is a defect even when it works.
**Conformity over novelty**: match the existing design and code structure even where you'd choose differently. A visually or structurally divergent addition is a defect even when it works.
- **Reuse existing UI primitives before writing new ones.** Windows and dialogs are `UIWindow*` functions in [src/gui/src/UI/](src/gui/src/UI/); generic pieces already exist (`UIAlert`, `UIPrompt`, `UIContextMenu`, `UINotification`, `UIPopover`, widgets in [UI/Components/](src/gui/src/UI/Components/)). A new window should read like its neighbors: an async function taking an options object, composing an HTML string, wiring behavior with jQuery, delegating to `UIWindow(...)`.
- **Match the visual language.** Use existing CSS classes (`button`, `button-primary`, window chrome, form styles) and copy the layout patterns of neighboring windows; new styles go in [src/gui/src/css/](src/gui/src/css/) following existing conventions. Verify anything positional (menus, overlays, z-index) on both desktop and mobile viewports.
- Denial of Service (DoS), spam, or volumetric attacks.
- Physical security issues.
## Eligibility
We pay bounties for issues that threaten user security and privacy, or the security and health of the platform. We appreciate every report, but hardening suggestions and correctness bugs are not eligible, even when we fix them. Please open a GitHub issue for those.
A report must show how an attacker can directly perform the action against another account or the system. It is not eligible if it:
- Starts from access the attacker should not already have: a stolen session or token, the victim's password, a root or full-access token, or script execution on `puter.com`.
- Needs the victim to do more than ordinary use (opening a link or an app), such as publishing their own secrets, sending a verification link to an address they don't control, or approving a prompt that accurately states what it grants.
- Gives the attacker nothing they couldn't already get through a supported API.
- Only reproduces in a non-default or development setup (SQLite, a `custom` OIDC provider, an unset outbound proxy, cookies or config planted by hand). Findings in the open-source code must affect `puter.com` or a default self-hosted install.
**Shared state.** Sharing files, KV entries, or cross-app KV access means the sharer trusts the sharee. Exploits that depend on that trust, such as a sharee misusing access the sharer granted, may be treated as hardening or lower severity.
Hardening we ship in a public PR does not make similar code paths vulnerabilities. They are judged by these same rules.
## Known Non-Issues (Please Check Before Submitting)
The following have already been reviewed and determined **not to be vulnerabilities**. Reports that only re-describe one of these are **not eligible for a reward** and will be closed as non-issues — even if they include new code references. Please review this list before submitting:
- **XSS / CORS / token issues scoped to `api.puter.com`.** The primary user session cookie lives on `puter.com`, not on the API origin, so reflected/stored XSS, CORS, or token handling on `api.puter.com` is generally out of scope. Two exceptions we _do_ evaluate on their merits — please report these: (a) attacker-controlled content served **inline** (e.g. an HTML `Content-Type`) from API file/response endpoints, and (b) anything that abuses the app-scoped `puter_token_v2` companion cookie set on the API host.
- **XSS / CORS / token issues scoped to `api.puter.com`.** The primary user session cookie lives on `puter.com`, not on the API origin, so reflected/stored XSS, CORS, or token handling on `api.puter.com` is out of scope. This explicitly includes **missing `Content-Security-Policy: sandbox` on any endpoint that serves a file inline** — `/token-read`, `/file`, `/fs/read`, WebDAV, and any MIME type the `applyInlineContentSecurity` allow-list does not cover (`text/xsl`, `image/svg+xml`, `application/xhtml+xml`, …). Script execution on the API origin has nothing to reach: there is no session cookie, no `localStorage`, and no ambient credential there. WebDAV additionally has to return an accurate MIME type for real WebDAV clients. The one exception we _do_ evaluate on its merits is anything that abuses the app-scoped `puter_token_v2` companion cookie set on the API host — if your report does not name a specific credential that is actually reachable from the API origin, it is this non-issue.
- **SSRF via `secureFetch`.** Production routes outbound requests through an isolated proxy that has no access to internal/SSRF-sensitive resources.
- **Attacks that depend on guessing an `appInstanceID` or app UID.** These are random 128-bit secret values and are not considered guessable.
- **Apps invoking drivers, creating workers, or using KV.** Applications are intended to do this; worker permissions are scoped to the owning app. This is by design.
- **App metadata or app user-count "leaks".** This information is currently public by design.
- **General "token in a URL" / token-lifetime designs** — signed directory URLs exposing children, a write signature implying read, or app tokens outliving a web session. These are current intended behaviors.
- **App metadata or app user-count "leaks".** This information is currently public by design. This covers **private apps** too: private apps are an unreleased, admin-only beta for paid listings in the Puter App Center. Their `index_url` and other metadata are not secret, the flag is not user-settable, and no production app relies on it. Reports that a private app's metadata is reachable through a sibling route (taskbar items, `/get-launch-apps`, `index_url` drift on the hosting gate, etc.) are normalization work, not vulnerabilities.
- **Worker hot-reload driven by a share recipient.** Sharing a worker's source file with write access is how you let a collaborator change that worker's code and have it deploy live. The redeploy running as the file owner, with the owner's worker credentials, is the intended behavior of that grant — the owner chose to hand out write access to executable code. If you do not want that, do not share the source file with write access.
- **Re-claiming a site or worker name its owner deleted.** A hosted site or worker name that its owner deletes is treated as abandoned by that owner. If one of their apps still points at it, whoever claims the name next serves that app's `index_url` and receives what the app is launched with, and a new app on the same origin may share the old one's identity. Guarding app identities against being recycled this way is ongoing hardening, not a security boundary, so new ways to re-claim an abandoned name, or to inherit an app's tokens or data through one, are not eligible.
- **Share-mode downgrades that do not cascade.** Demoting a delegate does not retroactively revoke the grants that delegate already issued downstream. Shares are independent grants once issued, not a live-evaluated chain. Revoking the downstream grant is a separate, supported action.
- **Metering, credit-hold, and quota inaccuracies.** Credit holds and quota checks are up-front estimates, and actual usage is billed afterwards. Overspend that is bounded and still billed is a correctness bug, including concurrent requests that exceed a hold or quota by some margin; the per-account concurrency and rate-limit gates are the control we rely on. Report these only if you can use a service without it being billed, or overspend without bound.
- **Existence-only oracles.** A response that tells "exists but forbidden" apart from "not found" for a path or ID the caller already supplied, without revealing anything else about it, is hardening.
- **Session and credential lifecycle around 2FA enrollment.** Enrolling in 2FA is not a credential-revocation event: existing authenticated sessions stay valid, and outstanding password-reset links stay valid. Likewise, account-management actions behind the `/user-protected/*` gate are password-gated by design, not TOTP-gated. A recovery code that stops being accepted fails _closed_ — it denies access rather than granting it, so it is a bug report, not a vulnerability.
- **Group permissions** (`/auth/revoke-user-group` and siblings). The group-permission surface is unfinished and not exposed anywhere in the product. Findings there are not reachable by any user.
- **Missing Subresource Integrity (SRI) on external scripts/styles.** Accepted as hardening, not as a vulnerability, absent a demonstrated compromise of the CDN in question.
- **General "token in a URL" / token-lifetime / token-storage designs** — signed directory URLs exposing children, a write signature implying read, app tokens outliving a web session, or the session token being held in `localStorage` on `puter.com`. These are current intended behaviors. Shorter-lived tokens with a refresh flow are on the roadmap; their absence is not a vulnerability on its own. Show a reproducible attack that does not already presuppose script execution on `puter.com`.
- **Missing PKCE, unverified `id_token` signatures, or other OIDC hardening.** Provider tokens are obtained through a server-to-server authorization-code exchange with the provider's token endpoint over TLS, so the resulting `id_token` / userinfo claims are trusted from that channel rather than from local JWKS signature verification — the callback never accepts a caller-supplied `id_token`. Adding local signature / `aud` / `iss` / `exp` checks is welcome defense-in-depth (please open a GitHub issue/PR), but their absence is not an account-takeover vector on its own.
- **JWT "algorithm confusion" / unpinned `algorithms` in `jwt.verify`.** Puter's session tokens are HMAC-signed (HS256) with a server-side secret, and there is no asymmetric public key anywhere in the verification path, so `alg`-substitution attacks do not apply. Explicitly pinning `algorithms` is a fine hardening PR, but it is not a vulnerability.
- **Static-source "SQL injection" in internal pagination.** Findings such as `LIMIT ${limit}` in list/notification queries: the limit is numerically coerced and clamped before it reaches the query, so it is not reachable with attacker-controlled string input. Hardening PRs to the internal stores are welcome, but these are not exploitable as reported.
@@ -45,7 +68,7 @@ To participate, you must:
3.**Respect availability**: Do not perform denial-of-service attacks or automated scans that degrade service.
4.**Follow disclosure policy**: Do not publicly disclose vulnerabilities until we have confirmed and patched the issue.
5.**Act in good faith**: Make every effort to avoid privacy violations, destruction of data, and interruption or degradation of services.
6.**Check the Known Non-Issues list**: Reports matching an item in the "Known Non-Issues" section above are not eligible and will be closed.
6.**Check Eligibility and Known Non-Issues**: Reports that fall outside "Eligibility" or match an item in "Known Non-Issues" above are not eligible and will be closed.
Reports that do not meet these guidelines may not be eligible for a reward.
@@ -56,14 +79,14 @@ Reports **MUST** demonstrate a **working, reproducible exploit with real impact*
- Exact steps to reproduce, the relevant request/response or code path, and the commit or version you tested.
- The **observed** result versus the **expected** result.
- For client-side, UI, or authentication-flow bugs: a short screen recording (≤ 2 minutes) showing the exploit working end-to-end on a real Puter instance.
- For server-side bugs: a runnable proof-of-concept and screenshot or video showing the attack process.
- For server-side bugs: a runnable proof-of-concept and screenshot or video showing the attack process. A unit test or in-process harness alone does not count; show it against a running instance.
Reports based solely on reading the source ("source review only, not tested") or unverified AI/LLM-generated reports are the **lowest triage priority and not eligible for bounty**.
If you used an AI tool to help find an issue, you must personally verify that it actually reproduces before submitting.
If you used an AI tool to help find an issue, you must personally verify that it actually reproduces before submitting. Reports sent by automated agents are not eligible.
Please submit **one issue per report**.
Bundled "audit packs" of many speculative findings will not be elligible for bounty; send each confirmed issue separately.
Additionally please **DO NOT** submit too many issues at once; these will be treated as a bundled report, and will not be elligible for bounty.
Bundled "audit packs" of many speculative findings will not be eligible for bounty; send each confirmed issue separately.
Additionally please **DO NOT** submit too many issues at once; these will be treated as a bundled report, and will not be eligible for bounty.
## Reporting Process
@@ -76,6 +99,8 @@ Include:
- Suggested remediation (if available)
- Paypal id where we can send the bounty (if eligible)
Send the full report in your first email. We don't reply to messages that only ask whether we run a bounty or where to report.
We aim to acknowledge receipt within **72 hours** and provide a resolution timeline.
## Reward Structure
@@ -88,7 +113,7 @@ We offer monetary rewards based on the severity of the vulnerability, as determi
- **Low: \$50 – \$100**
Non-security issues, suggestions, and best practices feedback are always welcome, but may not qualify for a reward.
If multiple researchers report the same issue, the bounty will be awarded to the first eligible report we receive.
If multiple researchers report the same issue, the bounty will be awarded to the first eligible report we receive. Issues we already know about, from internal review, an open ticket, or a fix already in a public commit or PR, count as duplicates.
Thanks for contributing. These rules aren't strictly enforced — but following them makes every PR easier. If anything's unclear, ping a core maintainer or open the PR and ask.
Thanks for contributing. These rules aren't strictly enforced, but following them makes every PR easier. If anything's unclear, ping a core maintainer or open the PR and ask.
New to the backend? Start with [doc/architecture.md](doc/architecture.md).
-New to the backend? Start with [doc/architecture.md](doc/architecture.md).
- Code, test, and docs conventions for the whole repo live in [AGENTS.md](AGENTS.md). It's written for AI agents; the conventions apply to human contributors too.
- Adding or changing a public API (an endpoint, driver method, or puter.js method)? Follow [doc/contributing-apis.md](doc/contributing-apis.md): backward compatibility, [developer docs](src/docs/), types, and tests all move in the same PR.
- Found a vulnerability? Report it privately per [SECURITY.md](SECURITY.md).
---
## 1. Test it. Run it.
## Before you open a PR
Run the affected code path end-to-end before opening a PR. "It builds" is not "it works."
Check your diff against these sections of AGENTS.md:
Add tests for new behavior, endpoints, or bug fixes. If something's genuinely hard to test, say so in the PR.
## 2. Follow existing patterns
Match the shape of similar code already in the repo. [doc/architecture.md](doc/architecture.md) is the source of truth for layers, wiring, and naming. If you think a pattern is wrong, raise it — don't quietly diverge.
In plain-JS files, typing is encouraged via JSDoc `@type` annotations using the TypeScript type system, with `@typedef` for shared shapes. Don't type API surfaces as `unknown` or untyped `...args` unless the values are passed through transparently to an upstream layer that owns their type.
## 3. Don't expose system or user information
Scan your diff for stray logs, debug routes, internal paths, secrets, tokens, or user data in errors/responses. When in doubt, return less. Flag any auth, permission, or data-export changes in the PR description.
For private security reports, see [SECURITY.md](SECURITY.md).
## 4. AI-assisted code is fine — understood code is required
Don't commit code you couldn't have written, debugged, or defended yourself. Read the diff, run it, and be ready to explain it in review.
## 5. Adding or changing APIs
If you add or change a public API (an endpoint, driver method, or puter-js method), follow [doc/contributing-apis.md](doc/contributing-apis.md) — backward compatibility, [developer docs](src/docs/), types, and tests all move in the same PR.
The same rule applies to limits: rate limits, concurrency caps, quotas, and allowances are published in [src/docs/src/rate-limits-and-quotas.md](src/docs/src/rate-limits-and-quotas.md), and a PR that changes one of those numbers updates that page in the same PR. A limit nobody published is a limit developers only discover as a service failure.
Fix the typo, the dead import, the missing test, the bit you had to read twice. Keep cleanup proportional to the change — no refactors riding along on bug fixes.
---
- [Working rules of thumb](AGENTS.md#working-rules-of-thumb): run it end to end, test new behavior and bug fixes, understand every line you commit (AI assistance is fine), leave touched files a bit better, and publish limit changes.
- [Reuse and abstraction](AGENTS.md#reuse-and-abstraction) and [hot paths](AGENTS.md#hot-paths).
- [Security & privacy](AGENTS.md#security--privacy): expose nothing the caller doesn't need.
**→** This should launch Puter at http://puter.localhost:4100
To run this checkout with Docker, follow [Building from source](./doc/self-hosting.md#building-from-source-instead-of-pulling). Create a local `docker-compose.override.yml` to select the local build; keeping these settings out of `docker-compose.yml` avoids conflicts when pulling updates and keeps local configuration out of pull requests.
<br/>
@@ -113,7 +117,9 @@ This repository, including all its contents, sub-projects, modules, and componen
Loosely inspired by the Controller–Service–Repository pattern with dependency injection. The backend is organized as a stack of layers where each layer only depends on the layers beneath it, and `PuterServer` ([src/backend/server.ts](../src/backend/server.ts)) instantiates each layer in order and hands the instances down to the next.
Loosely inspired by the Controller–Service–Repository pattern with dependency injection. The backend is a stack of layers; each depends only on the layers beneath it and receives them through its constructor from `PuterServer` ([src/backend/server.ts](../src/backend/server.ts)), which instantiates the layers in order. The rules for working within the layers are in [AGENTS.md](../AGENTS.md#backend).
## Layers
@@ -31,8 +31,6 @@ block-beta
style CFG fill:#334155,stroke:#1e293b,color:#fff
```
Each layer only depends on the layers beneath it, and every dependency is injected through the constructor by `PuterServer`. Extensions sit alongside this stack and can register into any layer — see [Extensions](#extensions) below.
| Layer | Lives in | Responsibility |
| --- | --- | --- |
| **Controllers** | [src/backend/controllers/](../src/backend/controllers/) | Route handlers. Parse + validate input, apply per-route gates (auth, subdomain, rate limit, body parsers — see `RouteOptions`), call into services, format responses. |
@@ -42,7 +40,7 @@ Each layer only depends on the layers beneath it, and every dependency is inject
| **Config** | `config.*.json` → `IConfig` | The flat, typed config object every layer receives at construction. |
Each layer receives the layers beneath it through its constructor, so dependencies are explicit and traceable from `PuterServer`. A controller does not reach into a client directly; if it needs one, the right move is usually a service.
Extensions sit alongside this stack and can register into any layer; see [Extensions](#extensions).
## Entry point: `PuterServer`
@@ -55,17 +53,25 @@ Each layer receives the layers beneath it through its constructor, so dependenci
## Context (ALS)
We use [`Context`](../src/backend/core/context.ts) — backed by `AsyncLocalStorage` — to carry per-request state without threading it through every function signature. It is used **sparingly**, mostly for `actor` and `req`. The request-context middleware opens a scope per request after the auth probe runs; anything inside a request handler can call `Context.get('actor')` / `Context.get('req')` instead of plumbing it as an argument.
[`Context`](../src/backend/core/context.ts), backed by `AsyncLocalStorage`, carries per-request state without threading it through every function signature. The request-context middleware opens a scope per request after the auth probe runs, so anything inside a request handler can call `Context.get('actor')` / `Context.get('req')`. It's used sparingly, mostly for `actor` and `req`; see the [Context rule](../AGENTS.md#backend).
Prefer explicit arguments. Reach for `Context` only when the value is truly request-scoped and would otherwise need to thread through many layers.
## Actors
An [`Actor`](../src/backend/core/actor.ts) is who a request is acting as. Its two app fields are not interchangeable: `app` is the app the actor carries *directly* (an app-under-user token), while `effectiveApp` is the app it ultimately acts as — its own, or the one that issued its access token. An access-token actor has no `app` of its own, so a gate that reads `app` answers "no app" for it and falls open.
`makeActor` resolves `effectiveApp` once at construction, and `assertResolvedActor` at the request edge rejects any actor that skipped it — so reading `effectiveApp` needs no fallback. Reach for `app` only where the direct app genuinely is the question, and say why in a comment.
-`actor.effectiveApp` — which app is acting. This is the default; nearly every scoping rule, namespace key and attribution wants it.
-`isAppActor(actor)` — a direct app actor specifically. Use it where a token must *not* be treated as its issuer, e.g. the permission scanners that read an app's own grant rows.
-`isPlainUserActor(actor)` — the account acting through nothing at all; `isAccountContext(actor)` for the wider "the account's own reach", which also admits a full-access token.
## Extensions
Extensions live alongside core ([packages/puter/extensions/](../extensions/)) and parallel the layered stack. They are meant for **non-crucial parts of the system** — things Puter still works without if removed.
Extensions live in [extensions/](../extensions/), parallel the layered stack, and hold the parts of the system Puter still works without. [AGENTS.md](../AGENTS.md#extensions) has the rule for what belongs in one.
- **Good extensions**: [thumbnails](../extensions/thumbnails.ts), [serverInfo](../extensions/serverInfo.ts), [devWatcher](../extensions/devWatcher.ts) — opt-in features cleanly bolted on.
- **Should probably be core**: [metering](../extensions/metering.ts), [appTelemetry](../extensions/appTelemetry.ts) — clients now expect these to be present, so the "extension" framing is misleading.
- **Shouldn't have been an extension**: [whoami](../extensions/whoami.ts) — it's load-bearing for every authenticated client. Keep this one in mind as a cautionary example when deciding whether something belongs in an extension.
- **Shouldn't have been an extension**: [whoami](../extensions/whoami.ts) — it's load-bearing for every authenticated client.
### Extension API
@@ -88,17 +94,22 @@ import { extension } from '@heyputer/backend/src/extensions';
The `app.recommended` event lets extensions customize desktop recommendations.
Its `appNames` array starts as a fresh copy of the default ordered names on each
call. Listeners may mutate or replace it, including setting it to an empty array.
Async listeners are awaited before names are resolved to app summaries; names
that do not exist are skipped.
- **TypeScript preferred** in new code where feasible. Existing JS is fine; convert opportunistically when you're already touching a file.
- **`camelCase`** for variable/function names; **`PascalCase`** for classes and for files that contain a class (`AuthService.ts`, `KVStoreDriver.ts`).
- **Deduplicate**. If two services need the same logic, lift it into a util/helper rather than calling sideways across the same layer — services should not depend on other services for code reuse.
- **Don't reach across layers.** Controllers do not poke clients directly; services do not register routes. If you find yourself wanting to, that's usually a signal the abstraction is wrong.
@@ -12,21 +12,7 @@ Every change is backward compatible unless a maintainer has explicitly agreed to
## Core or extension?
The first decision is where the API lives.
If the API is **not crucial to core functionality — nothing in core will call it — prefer an extension** over wiring it into core. Extensions live in [extensions/](../extensions/), parallel the core layered stack, and reach core through `extension.import(...)`:
extension.post('/my-feature/frobnicate',opts,handler);// or plain routes
```
Follow the same layered structure inside the extension (driver/controller → service → store) unless it genuinely only needs a couple of route handlers — then the lightweight `extension.get/post/...` helpers are enough on their own.
The test is the direction of dependency: Puter must still work with the extension removed. The moment core needs to call your API, it belongs in core — see [whoami](../extensions/whoami.ts) for the cautionary example of a load-bearing "extension".
The first decision is where the API lives. If **nothing in core will call it, prefer an extension** over wiring it into core. [AGENTS.md](../AGENTS.md#extensions) has the rule and its test; [architecture.md](architecture.md#extension-api) documents the `extension` API.
## Adding a new API
@@ -35,13 +21,13 @@ Work through all seven steps; the PR is complete when every one is.
### 1. Design the surface first
- Sketch the signature, options, return shape, and error cases before writing code. Find the two or three most similar existing APIs and match their conventions.
- New parameter and field names are `camelCase`. (Existing `snake_case` names stay where they already exist.)
- New parameter and field names follow the [naming rule](../AGENTS.md#language--files) (`camelCase`).
- Anything returning a list follows the [pagination convention](pagination.md): `limit`/`cursor` in, `{ items, cursor, total }` envelope out.
- Prefer an options object over a growing list of positional parameters, but keep the common case callable with a single argument where siblings do.
### 2. Backend
Follow the layered stack ([architecture.md](architecture.md)): a controller or driver at the edge, business logic in a service, persistence in a store. The edge parses and validates input and applies gates; services assume the caller is already authorized. Return exactly what the caller needs and no more — every response field you ship is permanent — and use stable `snake_case` error codes.
Follow the layered stack ([architecture.md](architecture.md), [layer rules](../AGENTS.md#backend)): a controller or driver at the edge, business logic in a service, persistence in a store. Return exactly what the caller needs and no more — every response field you ship is permanent — and use stable `snake_case` error codes.
#### Controller or driver?
@@ -53,10 +39,17 @@ Both are supported ways to define an API. **Prefer a controller when you need fi
#### Middleware and gates
- **Controller routes** (and extension routes — same options) take [`RouteOptions`](../src/backend/core/http/types.ts): auth gates (`requireAuth`, `requireUserActor`, `noUserSession`, `adminOnly`, `allowedAppIds`, and the access-token controls), `subdomain` routing, per-route `rateLimit`, body parsers, and arbitrary extra `middleware`. The auth flavors are subtle and default-deny — read the JSDoc on each field before picking.
- **Driver methods** get their policies from the `@Driver` options: per-method `rateLimit` (limit/window/backend), `concurrent` in-flight caps (optionally `bySubscription`), `requireSubscription`, and `noUserSession`. The `/drivers/call` surface enforces them.
- **A surface only paying accounts should reach** declares`requireSubscription` — the route option on a controller endpoint, the per-method `@Driver({ requireSubscription })` block on a driver (`/drivers/call` is one shared route, so a driver's requirement can't live in route options). `true` accepts any plan that isn't free, so a plan registered by an extension counts without core naming it; an array of policy ids (`['business', 'pro']`) accepts only those; `false`is "no requirement", the same as leaving it out. An empty array is a boot error rather than a silent no-op — it reads as subscribers-only while admitting everyone. Off unless asked for, and answered from the metering service's cached per-actor subscription, so it costs a map lookup. Distinct from`requireCredits`: this asks which plan the account is on, not whether it has budget left. Deployments with no paid plans (self-hosted installs) turn the whole thing off with `meteringEnforcement.subscriptions: false`.
- **An account must have verified a specific factor** — `requireVerified` (email, and only under `strict_email_verification_required`), `requirePhoneVerified`, `requireCardVerified`. These are opt-in and require the factor to have actually been verified, unlike the default-on gate that turns away accounts still carrying a pending verification the abuse harness asked for.
- **An endpoint that spends metered resources** on the caller's behalf — moving file content, making object-store requests, anything else the account is billed for — also declares `requireCredits: true`, which turns an account with nothing left of its budget away with a 402 before the handler runs. Endpoints that only describe or delete things deliberately don't: an account that has run out still has to be able to see what it has, clear it, and reach its billing pages. Drivers have no route options to declare this on, so they call `assertActorHasCredits` themselves ([src/backend/services/metering/enforcement.ts](../src/backend/services/metering/enforcement.ts)) — see `KVStoreDriver`, which does it once for every method.
- **Driver methods** get their policies from the `@Driver` options: per-method `rateLimit` (limit/window/backend), `concurrent` in-flight caps (optionally `bySubscription`), `requireSubscription`,`requireReputation`, and `noUserSession`. The `/drivers/call` surface enforces them.
- **Paying accounts only:**`requireSubscription`, as a route option on a controller endpoint or in the per-method `@Driver({ requireSubscription })` block on a driver (`/drivers/call` is one shared route, so a driver's requirement can't live in route options). `true` accepts any plan that isn't free, so a plan an extension registers counts without core naming it; an array of policy ids (`['business', 'pro']`) accepts only those; `false`or leaving it out means no requirement. An empty array is a boot error, since it would read as subscribers-only while admitting everyone. The check is a map lookup on the metering service's cached per-actor subscription. It asks which plan the account is on;`requireCredits` asks whether it has budget left. Deployments with no paid plans (self-hosted installs) turn it off with `meteringEnforcement.subscriptions: false`.
- **Trusted-enough accounts only:** `requireReputation`, as a route option or in the per-method `@Driver({ requireReputation })` block. Opt-in; implies `requireAuth`. The value names a tier, and `reputationGate.tiers` in config sets the score that tier takes, so a deployment can retune it without editing the surface. A tier the running config doesn't define is inert and everyone passes, so an install that doesn't score its accounts never turns traffic away on a score it never computed. `reputationGate.enabled: false` stops every declared gate at once. Denials are a bare 403 `reputation_required` that names neither the score nor the tier. Nothing in the tree declares one yet.
- **A specific verified factor:** `requireVerified` (email, and only under `strict_email_verification_required`), `requirePhoneVerified`, `requireCardVerified`. Opt-in, and the factor must actually have been verified, unlike the default-on gate that turns away accounts still carrying a pending verification the abuse harness asked for. `requireAnyVerified: ['phone', 'card']` is the OR of the last two: any listed factor verified at any point passes, as does a paid plan when `card` is listed (a paying account already has a card on file). Otherwise only the factors the deployment can verify are asked for (an SMS provider configured, a card gate an extension reports on); with none verifiable the gate is inert rather than locking the route on a self-hosted install. A denial carries the first verifiable factor's code plus `factors`(the verifiable ones, in the route's order), so a client can lead with one flow and offer the other. `verifiedFactorGate.enabled: false` in config stops every declared gate at once, e.g. during an SMS-provider outage.
- **Metered spend:** an endpoint that spends metered resources on the caller's behalf (moving file content, object-store requests, anything else the account is billed for) declares `requireCredits: true`, which turns an account with no budget left away with a 402 before the handler runs. Endpoints that only describe or delete things deliberately don't: an account that has run out still has to see what it has, clear it, and reach its billing pages. Drivers have no route options, so they call `assertActorHasCredits` themselves ([src/backend/services/metering/enforcement.ts](../src/backend/services/metering/enforcement.ts)) — see `KVStoreDriver`, which does it once for every method.
Provider sign-in requires the account's authenticator or a recovery code when 2FA is enabled, including signup callbacks that resolve an existing account. The five-minute challenge uses the same single-use `/login/otp` and `/login/recovery-code` verification as password sign-in. The GUI carries it in a URL fragment and removes it before initialization. A session and successful popup-return proof are issued only after verification; cancelling retains the popup's signed retry context without marking it authenticated.
Disabling 2FA through `/user-protected/disable-2fa` requires both password or OIDC revalidation and the current six-digit authenticator `code`. Missing, malformed, or incorrect codes leave the secret and recovery codes intact. A team's requirement for 2FA still prevents disabling it.
Email changes through `/user-protected/change-email` require the password or OIDC revalidation cookie, plus a six-digit `code` from the authenticator when 2FA is enabled. Missing or malformed codes return `400 bad_request`; incorrect codes return `401 code_mismatch`. Both include `factor: 'otp'`. Confirmation links are bound to that verified request. A 2FA-enabled account must request a new link if its existing link was issued without second-factor verification.
### 3. puter.js
@@ -65,33 +58,32 @@ Both are supported ways to define an API. **Prefer a controller when you need fi
### 4. Types
-Type the method where you wrote it, in JSDoc: `@param`/`@returns` on the implementation, one `@overload` block per accepted call form, and `@typedef {Object}` + `@property` for any new shape. The JSDoc is the source of truth — declarations are generated from it, so there is nothing to keep in sync by hand.
- Put a shape more than one file needs in the module's `types.js` (e.g. [src/puter-js/src/modules/kv/types.js](../src/puter-js/src/modules/kv/types.js)); anything shared across modules goes in [src/puter-js/src/lib/types.js](../src/puter-js/src/lib/types.js). A shape with one consumer can stay next to it.
- Run `npm run check:puterjs:types` — it generates the declarations and type-checks the published surface without `skipLibCheck`. **Never edit anything under `src/puter-js/types/`**: it is gitignored build output, produced by the SDK build and shipped in the npm tarball, and the next build overwrites it.
- Name the new type in [src/puter-js/index.d.ts](../src/puter-js/index.d.ts) if consumers should be able to import it. That file is the one hand-written declaration in the package: it decides what is public and re-exports nothing else.
Type the method in JSDoc on the implementation, following the [puter.js type rules](../AGENTS.md#types) (overloads, where shapes live, `index.d.ts`), then run `npm run check:puterjs:types`. Declarations are generated from the JSDoc, so there is nothing to keep in sync by hand.
### 5. Docs
- Add the method page at [src/docs/src/](../src/docs/src/)`<Area>/<method>.md` — frontmatter (`title`, `description`, `platforms`), syntax, parameters, return value, and at least one runnable example — and update the area overview (`<Area>.md`). Copy the structure of an existing page.
- The docs are the contract users code against: signatures, defaults, and return shapes match the implementation exactly.
### 6. Tests
- **Backend:** colocated Vitest tests; prefer the in-memory test server (`setupPuterTestEnv` in [src/backend/testUtil.ts](../src/backend/testUtil.ts)) over mocking.
- **SDK:** add cases to [src/puter-js/tests/api/suites/](../src/puter-js/tests/api/suites/)`<area>.suite.ts` (register new suites in `suites/index.ts`). One suite runs on node, browser, and workerd via `npm run test:puterjs` — never write per-platform tests, and rebuild first with `npm run build:workerLib` since the runners execute the built bundle.
- **Backend:** see [backendtests](../AGENTS.md#backend-tests).
- **SDK:** add cases to [src/puter-js/tests/api/suites/](../src/puter-js/tests/api/suites/)`<area>.suite.ts` (register new suites in `suites/index.ts`; there is no globbing). One suite runs on node, browser, and workerd via `npm run test:puterjs`; never write per-platform tests. The runners execute the built bundle, so run `npm run build:workerLib` first or the suite silently tests stale code.
- **Desktop-rendered UI** (`puter.ui.*`): add a Playwright spec per [src/puter-js/TESTING.md](../src/puter-js/TESTING.md).
### 7. Security pass
Scan the diff before opening the PR: no internals leaked in errors or logs, no over-broad responses, auth gates present. Flag anything auth-, permission-, or data-export-related in the PR description.
Run the [security & privacy](../AGENTS.md#security--privacy) check on the diff, and confirm the auth gates are present.
## Maintaining an existing API
Changes are **additive by default**:
- Existing call signatures keep working, including both positional and options-object forms where a method supports them. Say in the PR how existing callers are unaffected.
- New parameters are optional, with defaults that reproduce the old behavior exactly.
- Never rename, repurpose, or remove existing parameters, response fields, or error codes. Don't change types, ordering guarantees, or which fields are present when.
- New behavior that could surprise existing callers goes behind an opt-in flag.
- Docs, types, and tests move in the same PR as the behavior. A signature change with stale docs is a bug — the docs are the contract users code against.
- Docs, types, and tests move in the same PR as the behavior; a signature change with stale docs is a bug.
- Bug fixes come with a regression test that fails before the fix. Be suspicious of fixes that change observable behavior: someone may depend on the bug. When in doubt, ask a maintainer.
| `puter-smtp` | `ghcr.io/heyputer/puter` | Receives mail over SMTP and files it into user mailboxes |
State lives under `./puter/data/<service>/`.
---
@@ -144,6 +150,16 @@ Why these knobs:
-`providers.ollama.enabled: false` — Puter auto-probes a local Ollama at `127.0.0.1:11434` by default; without one running you'd see `ECONNREFUSED` on every boot. To run a bundled Ollama, see [Optional: local LLM (Ollama)](#optional-local-llm-ollama) below.
-`s3.s3Config.forcePathStyle: true` — RustFS / MinIO / fauxqs need path-style URLs (`<endpoint>/<bucket>`). Real AWS S3 wants virtual-hosted (`<bucket>.<endpoint>`) — drop this flag (or set `false`) when you swap to real S3.
-`s3.s3Config.publicEndpoint` — `endpoint` (`http://s3:9000`) only resolves inside the docker network; presigned upload/download URLs handed to the browser need a host-reachable URL. Caddy routes the `s3.<domain>` subdomain to RustFS internally and preserves the Host header end-to-end (required for S3 signature validation), so the browser hits the same port/protocol as the rest of the app — no separate published port, no mixed-content surprises when you turn on TLS. Switch to `https://s3.<your-domain>` once you enable TLS in Step 3. Real AWS S3 doesn't need this — its endpoint is already public; drop the field entirely.
- **Bucket CORS** — the browser uploads file bytes straight to RustFS with a cross-origin `PUT` to the presigned URL (Dev Center deploy, `puter.fs.upload`). That only works if the bucket answers the `OPTIONS` preflight with `Access-Control-Allow-*` headers. The `s3-init` container applies those rules on every boot (`put-bucket-cors`, origins `*` — the signed URL is the credential, and the SDK sends no cookies). If deploys fail with `No 'Access-Control-Allow-Origin' header is present`, re-run it: `docker compose run --rm s3-init`. Verify with:
You should see `access-control-allow-origin`, `allow-methods: GET, HEAD, PUT, POST, DELETE`, `allow-headers: *`, and `max-age: 3600`.
- `trust_proxy: 1` — Caddy terminates TLS and forwards `X-Forwarded-For`. Without this, `req.ip` is the docker-network address of the Caddy container instead of the real client IP, which breaks rate limiting and IP-based audit logs. `1` = one trusted hop (Caddy). Bump to `2` if you put Cloudflare in front of Caddy; never set `true` (it trusts every hop and makes XFF forgeable).
> If you ever change `MARIADB_PASSWORD` after first boot, `.env` alone won't update MariaDB — its credentials are baked into `./puter/data/mariadb/` on first init. Either rotate the password inside MariaDB by hand or `docker compose down && rm -rf ./puter/data/mariadb` to start fresh.
@@ -200,7 +216,7 @@ Drop the resulting `fullchain.pem` and `privkey.pem` into `./puter/tls/`.
[mysql] running migrations from /opt/puter/dist/src/backend/clients/database/migrations/mysql: 2 file(s)
[mysql] running migrations from /opt/puter/dist/src/backend/clients/database/migrations/mysql: <n> file(s)
[mysql] applied mysql_mig_1.sql (...)
[mysql] applied mysql_mig_2.sql (9 statements)
...
```
Then open **<https://puter.local>** (or `http://` if you skipped TLS). Login is `admin` — the temp password is printed once in the puter container logs on first boot:
Then open **<https://puter.localhost>** (or `http://` if you skipped TLS). Login is `admin`; its temporary password is printed in the puter container logs on every boot until you change it:
```bash
docker compose logs puter | grep tmp_password
docker compose logs puter | grep "password for admin"
```
Change it in Settings after first login.
@@ -378,14 +394,14 @@ Full provider list (chat, image, video, TTS, OCR) is in the template.
### Per-user storage quota
Default is 100 MB per user.
Storage is unlimited by default (bounded by host disk). To cap each user:
```json
"storage_capacity": 5368709120, // 5 GB
"is_storage_limited": true
```
Set `is_storage_limited: false` for unlimited (bounded by host disk).
`storage_capacity` defaults to 100 MB.
### Usage metering and budgets
@@ -397,8 +413,8 @@ deletion, stay available so an account can always see what it has and clear it.
On a self-hosted install this is almost certainly not what you want. There is
nowhere to buy more, so accounts are held to the free monthly allowance
(US$0.25 of measured cost — roughly 2 GiB of downloads) and start being refused
after that. Turn it off:
(US$0.50 of measured cost for a registered account, roughly 2.5 GiB of
downloads) and start being refused after that. Turn it off:
```json
"unlimitedMetering": true
@@ -418,6 +434,17 @@ Calls driven by a deployed worker are exempt from enforcement by default,
because a worker has no prompt to show and nobody watching it fail. Set
`"meteringEnforcement": { "workers": true }` to include them.
Monthly usage records expire on their own once they're old enough to be of no
further use — `meteringRetentionMonths` full months past the month they
belong to, 3 by default. Set it to `0` to keep every month's records forever:
```json
"meteringRetentionMonths": 6
```
Changing it, including to `0`, applies to records first written after the
change; records already stamped keep their expiry.
### Captcha on signup / login
Built-in proof-of-work captcha — no external service needed.
@@ -437,9 +464,10 @@ temporary or permanent one.
"disable_user_signup": true
```
### Block disposable email TLDs
### Block disposable email domains
Only enforced when `env: "prod"`.
Addresses on these domains (suffix match, so subdomains too) can't sign up or be
@@ -486,14 +514,125 @@ Without `--profile ai`, the `ollama` containers stay down and Puter (with `enabl
For GPU acceleration (NVIDIA), uncomment the `deploy:` block under the `ollama` service in [docker-compose.yml](../docker-compose.yml). Requires `nvidia-container-toolkit` on the host.
## Optional: receiving mail over SMTP
Puter can give each account a mailbox at a domain you control. Two pieces are
involved, and they are configured together under `userEmail`:
- an **ingress endpoint** (`POST /email/ingress`) that files a message into the
recipient's `~/.mail`. It exists whenever `userEmail.secret` is set.
- the **`puter-smtp` receiver**, which accepts mail from other mail servers and
hands each message to that endpoint. It runs as its own process, behind the
`smtp` compose profile.
> **Read this before you expose it.** An inbound mail server is unauthenticated
> by nature: anyone on the internet may hand it a message for any address in
> `localDomains`. Puter performs **no** spam filtering and **no** SPF, DKIM or
> DMARC checks — whatever is delivered is stored in the recipient's mailbox and
> counts against their storage. If that is not acceptable, put a filtering relay
> in front of it and point `localDomains` at that instead.
1. Configure it in `puter/config/config.json`:
```json
"userEmail": {
"secret": "a long random string",
"localServer": true,
"localDomains": ["example.com"]
}
```
`secret` is shared between the two halves; generate it with
`openssl rand -hex 32`. `localDomains` lists the domains this server accepts
mail for — anything else is refused at `RCPT TO`, which is what stops it
being used as an open relay. It has no default, and the receiver refuses to
start without it.
The receiver posts to `<api_base_url>/email/ingress` unless you set
`localIngressUrl`. The endpoint is served on the `api` subdomain, so if you
point it at an internal address to skip the reverse proxy, name that virtual
`localIngressHost` defaults to the host of `api_base_url`, which is usually
what you want.
2. Bring it up with the `smtp` profile:
```bash
docker compose --profile smtp up -d
docker compose logs -f puter-smtp
```
3. Point DNS at it:
```dns
mx.example.com. A 203.0.113.10
example.com. MX 10 mx.example.com.
```
Also set a `PTR` record for the address that resolves back to
`mx.example.com` — many senders refuse mail from a server without one.
Inbound TCP port 25 must reach the host. **Most cloud providers block port
25 by default and residential ISPs block it permanently**; if you cannot get
it unblocked, this will not work no matter how it is configured. The
container itself binds 2525 (it runs unprivileged) and compose publishes
`${SMTP_PORT:-25}` onto it, so you can move the host port if you need to.
A message is held in memory while it is being delivered, so peak memory is
bounded by `localMaxClients` (default 20) times the 25 MiB message ceiling.
Lower `localMaxClients` on a small host. There is no queue and no retry
schedule — if delivery fails, the sending server is told to try again later and
retrying is its job.
Mail is stored as `message/rfc822` objects under `~/.mail/objects/<date>/` and
read back through `puter.email` in the SDK.
Every setting is documented in
[config.template.jsonc](../config.template.jsonc). Two deliberate limits, both
in the name of keeping the self-hosted path simple: it does not offer STARTTLS,
so mail arrives in the clear, and it applies no per-sender rate limiting. Put a
filtering relay in front if either matters to you.
Note this is a *receiving* server only: it never sends, and it must not be used
for authenticated submission. Outbound transactional mail is the separate
`email` block above.
## Building from source instead of pulling
If you want to test local Dockerfile changes against the full stack, uncomment the `build:` block in [docker-compose.yml](../docker-compose.yml) under the `puter` service, change `pull_policy: always` → `pull_policy: never`, then:
To run a local build against the full stack, use a source checkout and complete
the configuration steps above. Create `docker-compose.override.yml` in the
repository root, next to [docker-compose.yml](../docker-compose.yml):
```yaml
services:
puter:
pull_policy: never
build:
context: .
```
If that file already exists, merge these settings into its `puter` service.
Compose merges the override automatically: `build.context: .` builds this
checkout, and `pull_policy: never` stops it pulling the published image. Git
ignores the override, so local build settings stay out of pull requests and
don't conflict with `docker-compose.yml` when you pull updates.
From the repository root, build and start the stack:
```bash
docker compose up -d --build
```
Run the same command after changing or pulling source code to rebuild the image.
To return to the published image, remove the local build settings (or the override
file if those are its only settings), then run `docker compose up -d`.
---
## Managing running backend
@@ -521,11 +660,11 @@ Migrations re-apply idempotently across pulls. Volumes are preserved.
**Site loads but I get a 502 / "Bad Gateway" from Caddy.**
The puter container failed to come up. `docker compose logs puter` will tell you which dependency rejected it (most often DB password mismatch between `.env` and `config.json`).
**Login screen says "admin password not set".**
First-boot temp password is logged once. Find it: `docker compose logs puter | grep "tmp_password"`. After login, change it in Settings.
**Can't find the admin password.**
It's logged on every boot until you change it: `docker compose logs puter | grep "password for admin"`. After login, change it in Settings.
**Healthcheck reports unhealthy but the site works.**
The healthcheck hits `puter.localhost:4100/test` from inside the container. If you changed `domain` or `port`, the check still uses defaults. The site itself is fine.
The compose healthcheck requests `http://localhost:4100/` from inside the container. If you changed `port` or set `allow_all_host_values: false`, the check fails while the site itself is fine.
**Nothing resolves at `puter.example.com` after DNS changes.**
DNS propagates slowly. `dig puter.example.com` and `dig api.puter.example.com` should both return your server IP. If not, give it 5–60 minutes.
Loaded 100 of 1719 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Nariman Jelveh