Some build bots have not been updated to the new minimal CMake version.
Reverting for now and ping the buildbot owners.
This reverts commit 44c6b905f8.
This partly undoes D137724.
This change has been discussed on discourse
https://discourse.llvm.org/t/rfc-upgrading-llvms-minimum-required-cmake-version/66193
Note this does not remove work-arounds for older CMake versions, that
will be done in followup patches.
Reviewed By: mehdi_amini, MaskRay, ChuanqiXu, to268, thieta, tschuett, phosek, #libunwind, #libc_vendors, #libc, #libc_abi, sivachandra, philnik, zibi
Differential Revision: https://reviews.llvm.org/D144509
Add a variant of the clspv target that is built using spir64.
This is a pre-requisite to supporting spir64 in clspv which is
required to take advantage of SPV_KHR_physical_storage_buffer which
in turn enables more OpenCL C programs to be compiled with clspv.
https://reviews.llvm.org/D116668
Just defensive CMake-ing. I pulled this from D115544 and D99484 which
are blocked on some lldb CI failures I don't yet understand. Hoping to land
something smaller in the meantime.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D115566
This reverts commit 492de35df4.
I tried to apply John's changes in 8d897ec915 that were expected to
fix his patch but that didn't work unfortunately.
Reverting this again to fix the macOS bots and leave him more time to
investigate the issue.
This reverts commit 797b50d4be.
See the original D99484. @mib who noticed the original problem could not longer
reproduce it, after I tried and also failed. We are threfore hoping it went
away on its own!
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D115544
This is a new draft of D28234. I previously did the unorthodox thing of
pushing to it when I wasn't the original author, but since this version
- Uses `GNUInstallDirs`, rather than mimics it, as the original author
was hesitant to do but others requested.
- Is much broader, effecting many more projects than LLVM itself.
I figured it was time to make a new revision.
I am using this patch (and many back-ports) as the basis of
https://github.com/NixOS/nixpkgs/pull/111487 for my distro (NixOS). It
looked like people were generally on board in D28234, but I make note of
this here in case extra motivation is useful.
---
As pointed out in the original issue, a central tension is that LLVM
already has some partial support for these sorts of things. For example
`LLVM_LIBDIR_SUFFIX`, or `COMPILER_RT_INSTALL_PATH`. Because it's not
quite clear yet what to do about those, we are holding off on changing
libdirs and `compiler-rt`. for this initial PR.
---
On the advice of @lebedev.ri, I am splitting this up a bit per
subproject, starting with LLVM. To allow it to be more easily reviewed. This and the subsequent patch must be landed together, as this will not build alone. But the rest can be landed on their own.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D100810
The rounding during type conversion uses multiple conversions, selecting
between them to try to discover if rounding occurred. This appears to
not have been tested, since it would generate code of the form:
float convert_float_rtp(char x)
{
float r = convert_float(x);
char y = convert_char(y);
[...]
}
which will access uninitialised data. The idea appears to have been to
have done a char -> float -> char roundtrip in order to discover the
rounding, so do this.
Discovered by inspection.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed By: jvesely
Differential Revision: https://reviews.llvm.org/D81999
cf3ef15a6e ("[OpenCL] Add builtin
declarations by default.")
switched behaviour to include "opencl-c-base.h". We don't want or need
that for libclc so pass the flag to revert to old behaviour.
Fixes build since cf3ef15a6e
Reviewed By: tstellar
Differential Revision: https://reviews.llvm.org/D99794
Stop using the compatibility spellings of `OF_{None,Text,Append}`
left behind by 1f67a3cba9. A follow-up
will remove them.
Differential Revision: https://reviews.llvm.org/D101650
Add clspv as a new target for libclc. clspv is an open-source compiler that compiles OpenCL C to Vulkan SPIR-V. Compiles for the spir target.
The clspv target differs from the the spirv target in the following ways:
* fma is modified to use uint2 instead of ulong for mantissas. This results in lower performance fma, but provides a implementation that can be used on more Vulkan devices where 64-bit integer support is less common.
* Use of a software implementation of nextafter because the generic implementation depends on nextafter being a defined builtin function for which clspv has no definition.
* Full optimization of the library (-O3) and no conversion to SPIR-V
This library is close to what would be produced by running opt -O3 < builtins.opt.spirv-mesa3d-.bc > builtins.opt.clspv--.bc and continuing the build from that point.
Reviewer: jvesely
Differential Revision: https://reviews.llvm.org/D94013
The script's shebang wants Python 3, so we use FindPython3. The
original code didn't work when an unversioned python was not available.
This is explicitly allowed in PEP 394. ("Distributors may choose to set
the behavior of the python command as follows: python2, python3, not
provide python command, allow python to be configurable by an end user
or a system administrator.")
Also I think it's actually required, so let the configuration fail if we
can't find it.
Lastly remove the shebang, since the script is only run via interpreter
and doesn't have the executable bit set anyway.
Reviewed By: jvesely
Differential Revision: https://reviews.llvm.org/D88366
Add targets to emit SPIR-V targeted to Mesa's OpenCL support, using
SPIR-V 1.1.
Substantially based on Dave Airlie's earlier work.
libclc: spirv: remove step/smoothstep apis not defined for SPIR-V
libclc: disable inlines for SPIR-V builds
Reviewed By: jvesely, tstellar, jenatali
Differential Revision: https://reviews.llvm.org/D77589
The SPIR spec states that all OpenCL built-in functions should be
overloadable and mangled, to ensure consistency.
Add the overload attribute to functions which were missing them:
work dimensions, memory barriers and fences, and events.
Reviewed By: tstellar, jenatali
Differential Revision: https://reviews.llvm.org/D82078
Fix FP_ILOGBNAN definition to match the opencl-c-base.h one and
guarantee that FP_ILOGBNAN and FP_ILOGB0 are different. Doing that
implies fixing ilogb() implementation to return the right value.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed By: jvesely
Differential Revision: https://reviews.llvm.org/D83473
Summary:
The llvm libraries depend on the symbols in the system libaries, so
the system libraries need to be added after.
Reviewers: jvesely
Reviewed By: jvesely
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78535
This is required for using the Ninja backend on Windows, as it passes
commands directly to CreateProcess, and does not allow the shell to
interpret them: https://ninja-build.org/manual.html#ref_rule_command
Using the Visual Studio backend is not possible as attempting to create
a static library target comprised entirely of novel languages not known
to the Visual Studio backend built in to CMake's C++ source will
generate nothing at all.
reviewer: jvesely
Differential Revision: https://reviews.llvm.org/D77165
We don't want the regular linker flags for these invocations, since
we're not compiling to the target machine anyway. This fixes things like
'/machine:x64' being unknown when invoked under Windows.
reviewer: jvesely
Differential Revision: https://reviews.llvm.org/D77164
When providing a fake compiler, libclc currently uses 'true' which does
not exist on Windows. Use echo instead as the no-op.
reviewer: jvesely
Differential Revision: https://reviews.llvm.org/D77163
CMake requires library lists on Windows to be split by semi-colons,
rather than the spaces we get from llvm-config. Fix this by a
substitution on Windows.
reviewer: jvesely
Differential Revision: https://reviews.llvm.org/D77162
Fixes a wimpy-mode CTS failure for asin(float).
Passes non-wimpy for both float/double on RX580.
Signed-off-by: Aaron Watry <awatry@gmail.com>
Tested-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
