Summary:
objdump was interpreting the function header containing the locals
declaration as instructions. To parse these without injecting target
specific code in objdump, MCDisassembler::onSymbolStart was added to
be implemented by the WebAssembly implemention.
WasmObjectFile now returns a code offset for the "address" of a symbol,
rather than the index. This is also more in-line with what other
targets do.
Also ensured that the AsmParser correctly puts each function
in its own segment to enable this test case.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56684
llvm-svn: 351460
This allows it to be used in an upcoming llvm-readobj change.
A small change in internal behaviour of the function is to always call
the microsoftDemangle function if the string does not have an itanium
encoding prefix, rather than only if it starts with '?'. This is
harmless because the microsoftDemangle function does the same check
already.
Reviewed by: grimar, erik.pilkington
Differential Revision: https://reviews.llvm.org/D56721
llvm-svn: 351448
This refactors the getRelocationValueString method.
It is a bit overcomplicated and it is possible to reduce it without
losing the functionality it seems.
Differential revision: https://reviews.llvm.org/D56778
llvm-svn: 351417
This is a cosmetic cleanup for the llvm-objdump code.
This patch:
* Renames things to match the official LLVM code style (lower case -> upper case).
* Removes few obviously excessive variables.
* Moves a few lines closer to the place of use, reorders the code a bit to simplify it,
to avoid doing excessive returns and to avoid using 'else` after returns.
I focused only on a llvm-objdump.h/llvm-objdump.cpp files. Few changes in the
MachODump.cpp and COFFDump.cpp are a result of llvm-objdump.h modification.
Differential revision: https://reviews.llvm.org/D56637
llvm-svn: 351171
This is https://bugs.llvm.org/show_bug.cgi?id=26892,
GNU objdump hides the special symbol entry:
SYMBOL TABLE:
000000000000a7e0 l F .text 00000000000003f9 bi_copymodules
while llvm-objdump does not:
SYMBOL TABLE:
0000000000000000 *UND* 00000000
000000000000a7e0 l F .text 000003f9 bi_copymodules
Patch makes the behavior of the llvm-objdump to be consistent with the GNU objdump.
Differential revision: https://reviews.llvm.org/D56076
llvm-svn: 350840
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
Should fix the http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25876/steps/build/logs/stdio:
/home/grosser/buildslave/polly-amd64-linux/llvm.src/tools/llvm-objdump/llvm-objdump.cpp:539:25: error: conditional expression is ambiguous; 'std::string' (aka 'basic_string<char>') can be converted to 'typename std::remove_reference<StringRef>::type' (aka 'llvm::StringRef') and vice versa
Target = Demangle ? demangle(*SymName) : *SymName;
llvm-svn: 349617
Improve compatibility with GNU objdump by showing `O` next to
global symbol names, instead of a blank space.
Patch by Higuoxing (Xing).
Reviewers: MaskRay
Differential Revision: https://reviews.llvm.org/D54380
llvm-svn: 346610
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
This fixes PR39402. The crash was caused when dereferencing nullptr in
DumpObject and printArchiveChild.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D53690
Patch by Xing GUO
llvm-svn: 345503
Changed the format call to match the surrounding code. Previously it was
printing an unsigned int while the return type being printed was
long unsigned int or wider. This caused problems for big-endian systems
which were discovered on mips64.
Also, the printed address had less characters than it should because the
character count was directly obtained from the number of bytes in the
address.
The tests were adapted to fit this fix and now use longer addresses.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D53403
llvm-svn: 344818
LLVM triple normalization is handling "unknown" and empty components
differently; for example given "x86_64-unknown-linux-gnu" and
"x86_64-linux-gnu" which should be equivalent, triple normalization
returns "x86_64-unknown-linux-gnu" and "x86_64--linux-gnu". autoconf's
config.sub returns "x86_64-unknown-linux-gnu" for both
"x86_64-linux-gnu" and "x86_64-unknown-linux-gnu". This changes the
triple normalization to behave the same way, replacing empty triple
components with "unknown".
This addresses PR37129.
Differential Revision: https://reviews.llvm.org/D50219
llvm-svn: 339294
Summary:
With Mach-O, there is a flag requirement discrepancy between working with
universal binaries and thin binaries. Many flags that don't require the `-macho`
flag (for example `-private-headers` and `-disassemble`) fail to work on
universal binaries unless `-macho` is given. When this happens, the error
message is unhelpful, stating:
The file was not recognized as a valid object file.
Which can lead to confusion.
This change allows generic flags to be used on universal binaries with and
without the `-macho` flag. This means flags that can be used for thin files can
be used consistently with fat files too.
To do this, the universal binary support within `ParseInputMachO()` is extracted
into a new function. This new function is called directly from `DumpInput()`
when the input binary is universal. Additionally the `-arch` flag validation in
`ParseInputMachO()` was extracted to be reused.
Reviewers: compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48702
llvm-svn: 338792
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Imagine we have a file with few sections, and one of them is .foo
with index N != 0.
Problem is that when llvm-objdump is given a -section=.foo parameter
it lists .foo as a section at index 0. That makes impossible to write
test cases which needs to find the index of the particular section,
while ignoring dumping of others.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49372
llvm-svn: 337361
Summary:
"Unknown" for platforms that were not manually added into the switch
did not make sense at all. Now it prints Target + addend for all
elf-machines that were not explicitly mentioned.
Addresses PR21059 and PR25124.
Original author: fedor.sergeev
Reviewers: jyknight, espindola, fedor.sergeev
Reviewed By: jyknight
Subscribers: eraman, dcederman, jfb, dschuff, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D36464
llvm-svn: 333726
Change relocation output so that relocation information follows
individual instructions rather than clustering them at the end
of packets.
This change required shifting block of code but the actual change
is in HexagonPrettyPrinter's PrintInst.
Differential Revision: https://reviews.llvm.org/D46728
llvm-svn: 332283
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
When disassembling with -D, skip virtual sections by printing "..." for
each symbol.
This patch also implements `MachOObjectFile::isSectionVirtual`.
Test case comes from:
```
.zerofill __DATA,__common,_data64unsigned,472,3
```
Differential Revision: https://reviews.llvm.org/D45824
llvm-svn: 330342
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
