(& because it makes it easier to test, this also improves
correctness/performance slightly by moving the last element in an insert
operation, rather than copying it)
llvm-svn: 210429
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
This would cause the last element in a range to be in a moved-from state
after an insert at a non-end position, losing that value entirely in the
process.
Side note: move_backward is subtle. It copies [A, B) to C-1 and down.
(the fact that it decrements both the second and third iterators before
the first movement is the subtle part... kind of surprising, anyway)
llvm-svn: 210426
Now the scheduler updates a node's ready time as soon as it is
scheduled, before releasing dependent nodes. There was a reason I
didn't do this initially but it no longer applies.
A53 is in-order and was running into an issue where nodes where added
to the readyQ too early. That's now fixed.
This also makes it easier for custom scheduling strategies to build
heuristics based on the actual cycles that the node was scheduled at.
The only impact on OOO (sandybridge/cyclone) is that ready times will
be slightly more accurate. I didn't measure any significant regressions.
llvm-svn: 210390
Add an isWindowsItaniumEnvironment function to Triple to mirror the other
Windows environments. This is simply a utility function to check if we are
targeting windows-itanium rather than windows-msvc.
llvm-svn: 210383
* Section association cannot use just the section name as many
sections can have the same name. With this patch, the comdat symbol in
an assoc section is interpreted to mean a symbol in the associated
section and the mapping is discovered from it.
* Comdat symbols were not being set correctly. Instead we were getting
whatever was output first for that section.
A consequence is that associative sections now must use .section to
set the association. Using .linkonce would not work since it is not
possible to change a sections comdat symbol (it is used to decide if
we should create a new section or reuse an existing one).
This includes r210298, which was reverted because it was asserting
on an associated section having the same comdat as the associated
section.
llvm-svn: 210367
We extended the .section syntax to allow multiple sections with the
same name but different comdats, but currently we don't make sure that
the output section has that comdat symbol.
That happens to work with the code llc produces currently because it looks like
.section secName, "dr", one_only, "COMDATSym"
.globl COMDATSym
COMDATSym:
....
but that is not very friendly to anyone coding in assembly or even to
llc once we get comdat support in the IR.
This patch changes the coff object writer to make sure the comdat symbol is
output just after the section symbol, as required by the coff spec.
llvm-svn: 210298
This is a first step in seeing if it is possible to make llvm-nm produce
the same output as darwin's nm(1). Darwin's default format is bsd but its
-m output prints the longer Mach-O specific details. For now I added the
"-format darwin" to do this (whos name may need to change in the future).
As there are other Mach-O specific flags to nm(1) which I'm hoping to add some
how in the future. But I wanted to see if I could get the correct output for
-m flag using llvm-nm and the libObject interfaces.
I got this working but would love to hear what others think about this approach
to getting object/format specific details printed with llvm-nm.
llvm-svn: 210285
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
Abstract variables within abstract scopes that are entirely optimized
away in their first inlining are omitted because their scope is not
present so the variable is never created. Instead, we should ensure the
scope is created so the variable can be added, even if it's been
optimized away in its first inlining.
This fixes the incorrect debug info in missing-abstract-variable.ll
(added in r210143) and passes an asserts self-hosting build, so
hopefully there's not more of these issues left behind... *fingers
crossed*.
llvm-svn: 210221
This is purely a documentation/whitespace cleanup for the format support
functions.
The current style does not duplicate the function/class names in the
documentation; conform to this style.
Additionally, there was a large amount of duplication of comments that added no
real value. Use block comments for the related sets of functions which are used
for type deduction and parameter container classes.
No functional change.
llvm-svn: 210190
Replicate the fact that ARM::WinEH::RuntimeFunction purposefully does not merge
functions to accommodate raw data access use cases in tools such as readobj.
Pointed out by Renato during post-commit review.
No functional change.
llvm-svn: 210189
As requested by AArch64 subtargets.
Note that this will have no effect until the
AArch64 target actually enables the pass like this:
substitutePass(&PostRASchedulerID, &PostMachineSchedulerID);
As soon as armv7 switches over, PostMachineScheduler will become the
default postRA scheduler, so this won't be necessary any more.
Targets using the old postRA schedule would then do:
substitutePass(&PostMachineSchedulerID, &PostRASchedulerID);
llvm-svn: 210167
These were not exposed previously because I didn't want out-of-tree
targets to be too dependent on their internals. They can be reused for
a very wide variety of processors with casual scheduling needs without
exposing the classes by instead using hooks defined in
MachineSchedPolicy (we can add more if needed). When targets are more
aggressively tuned or want to provide custom heuristics, they can
define their own MachineSchedStrategy. I tend to think this is better
once you start customizing heuristics because you can copy over only
what you need. I don't think that layering heuristics generally works
well.
However, Arch64 targets now want to reuse the Generic scheduling logic
but also provide extensions. I don't see much harm in exposing the
Generic scheduling classes with a major caveat: these scheduling
strategies may change in the future without validating performance on
less mainstream processors. If you want to be immune from changes,
just define your own MachineSchedStrategy.
llvm-svn: 210166
Also correct the llvm-config.h header guard so it doesn't depend on 'CONFIG_H'
which is commonly defined in external projects and caused trouble for
embedders.
In future llvm/Config/llvm-config.h will be installed, but not
the private llvm/Config/config.h header.
llvm-svn: 210144
This gets us closer to being able to remove LiveVariables entirely which is where dead instructions are currently tagged as such.
Reviewed by Jakob Olesen
llvm-svn: 210132
This patch changes GlobalAlias to point to an arbitrary ConstantExpr and it is
up to MC (or the system assembler) to decide if that expression is valid or not.
This reduces our ability to diagnose invalid uses and how early we can spot
them, but it also lets us do things like
@test5 = alias inttoptr(i32 sub (i32 ptrtoint (i32* @test2 to i32),
i32 ptrtoint (i32* @bar to i32)) to i32*)
An important implication of this patch is that the notion of aliased global
doesn't exist any more. The alias has to encode the information needed to
access it in its metadata (linkage, visibility, type, etc).
Another consequence to notice is that getSection has to return a "const char *".
It could return a NullTerminatedStringRef if there was such a thing, but when
that was proposed the decision was to just uses "const char*" for that.
llvm-svn: 210062
Instrumentation passes now use attributes
address_safety/thread_safety/memory_safety which are added by Clang frontend.
Clang parses the blacklist file and adds the attributes accordingly.
Currently blacklist is still used in ASan module pass to disable instrumentation
for certain global variables. We should fix this as well by collecting the
set of globals we're going to instrument in Clang and passing it to ASan
in metadata (as we already do for dynamically-initialized globals and init-order
checking).
This change also removes -tsan-blacklist and -msan-blacklist LLVM commandline
flags in favor of -fsanitize-blacklist= Clang flag.
llvm-svn: 210038
Replace the crufty build-time configure checks for program paths with
equivalent runtime logic.
This lets users install graphing tools as needed without having to reconfigure
and rebuild LLVM, while eliminating a long chain of inappropriate compile
dependencies that included GUI programs and the windowing system.
Additional features:
* Support the OS X 'open' command to view graphs generated by any of the
Graphviz utilities. This is an alternative to the Graphviz OS X UI which is
no longer available on Mountain Lion.
* Produce informative log output upon failure to indicate which programs can
be installed to view graphs.
Ping me if this doesn't work for your particular environment.
llvm-svn: 210001
Since we cannot yet use variadic templates, add a specialisation for
6-parameters to format. This is motivated by a need for the additional
parameter for formatting information for an unwind decoder for Windows on ARM.
llvm-svn: 209999
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
llvm-svn: 209998
DAG cycle detection is only enabled with ENABLE_EXPENSIVE_CHECKS. However we
can run it just before we would crash in order to provide more informative
diagnostics.
Now in addition to the "Overran sorted position" message we also get the Node
printed if a cycle was detected.
Tested by building several configs: Debug+Assert, Debug+Assert+Check (this is
ENABLE_EXPENSIVE_CHECKS), Release+Assert and Release. Also tried that the
AssignTopologicalOrder assert produces the expected results.
llvm-svn: 209977
Pass the DAG down to checkForCycles from all callers where we have it. This
allows target-specific nodes to be printed properly.
Also print some missing newlines.
llvm-svn: 209976
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
llvm-svn: 209967
