Summary:
When enabling GPU codegen in polly, CMake will fail if NVPTX is not a target
supported by the LLVM polly is being built against. In that case, GPU codegen
should be switched off.
Reviewers: Meinersbur, grosser, bollu
Reviewed By: Meinersbur
Subscribers: mgorny, bollu, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D47888
llvm-svn: 334233
CMake insists that for each target, one uses only the non-keyword
version of target_link_library
target_link_library(mytarget lib)
or the one with PUBLIC/PRIVATE/INTERFACE keyword:
target_link_library(mytarget PUBLIC lib)
Otherwise, CMake fails with the error message:
The keyword signature for target_link_libraries has already been used with
the target "mytarget". All uses of target_link_libraries with a target
must be either all-keyword or all-plain.
Change all occurances of target_link_library to the newer keyworded
version to avoid such errors. Some already have been changed in r319840,
but might not be sufficient for all build configurations to build
the doxygen manual.
Reported-by: Tanya Lattner <tanyalattner@llvm.org>
llvm-svn: 322376
Summary:
There is a bug in the current lit configurations for the unittests. If gtest is not available, the site-config for the unit tests won't be generated. Because lit recurses through the test directory, the lit configuration for the unit tests will be discovered nevertheless, leading to a fatal error in lit.
This patch semi-gracefully skips the unittests if gtest is not available. As a result, running lit now prints this: `warning: test suite 'Polly-Unit' contained no test`.
If people think that this is too annoying, the alternative would be to pick apart the test directory, so that the lit testsuite discovery will always only find one configuration. In fact, both of these things could be combined. While it's certainly nice that running a single lit command runs all the tests, I suppose people use the `check-polly` make target over lit most of the time, so the difference might not be noticed.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: mgorny, bollu, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D34053
llvm-svn: 307651
Summary:
As of now, Polly uses llvm-config to set up LLVM dependencies in an out-of-tree build.
This is problematic for two reasons:
1) Right now, in-tree and out-of-tree builds in fact do different things. E.g., in an in-tree build, libPolly depends on a handful of LLVM libraries, while in an out-of-tree build it depends on all of them. This means that we often need to treat both paths seperately.
2) I'm specifically unhappy with the way libPolly is linked right now, because it just blindly links against all the LLVM libs. That doesn't make a lot of sense. For instance, one of these libs is LLVMTableGen, which contains a command line definition of a -o option. This means that I can not link an out-of-tree libPolly into a tool which might want to offer a -o option as well.
This patch (mostly) drop the use of llvm-config in favor of LLVMs exported cmake package. However, building Polly with unittests requires access to the gtest sources (in the LLVM source tree). If we're building against an LLVM installation, this source tree is unavailable and must specified. I'm using llvm-config to provide a default in this case.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: tstellar, bollu, chapuni, mgorny, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D33299
llvm-svn: 307650
Summary:
The custom `polly-check-format` target runs clang-format over all source files in the directory tree excluding lib/External. `isl_config.h` is a header file that is generated by CMake in the build directory, and it's not correctly formatted (which I also wouldn't consider necessary, as it is a generated file).
If the build directory is actually inside the Polly source directory (which it might be if you're building Polly out-of-tree), that check always fails. Hence this patch excludes this file from the check-format target.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: mgorny, llvm-commits, pollydev
Tags: #polly
Differential Revision: https://reviews.llvm.org/D33192
llvm-svn: 303060
Summary:
When compiling for GPU, one can now choose to compile for OpenCL or CUDA,
with the corresponding polly-gpu-runtime flag (libopencl / libcudart). The
GPURuntime library (GPUJIT) has been extended with the OpenCL Runtime library
for that purpose, correctly choosing the corresponding library calls to the
option chosen when compiling (via different initialization calls).
Additionally, a specific GPU Target architecture can now be chosen with -polly-gpu-arch (only nvptx64 implemented thus far).
Reviewers: grosser, bollu, Meinersbur, etherzhhb, singam-sanjay
Reviewed By: grosser, Meinersbur
Subscribers: singam-sanjay, llvm-commits, pollydev, nemanjai, mgorny, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32431
llvm-svn: 302379
Allow using a system's install jsoncpp library instead of the bundled
one with the setting POLLY_BUNDLED_JSONCPP=OFF.
This fixes llvm.org/PR32929
Differential Revision: https://reviews.llvm.org/D32922
llvm-svn: 302336
This reverts commit 17a84e414adb51ee375d14836d4c2a817b191933.
Patches should have been submitted in the order of:
1. D32852
2. D32854
3. D32431
I mistakenly pushed D32431(3) first. Reverting to push in the correct
order.
llvm-svn: 302217
Summary:
When compiling for GPU, one can now choose to compile for OpenCL or CUDA,
with the corresponding polly-gpu-runtime flag (libopencl / libcudart). The
GPURuntime library (GPUJIT) has been extended with the OpenCL Runtime library
for that purpose, correctly choosing the corresponding library calls to the
option chosen when compiling (via different initialization calls).
Additionally, a specific GPU Target architecture can now be chosen with -polly-gpu-arch (only nvptx64 implemented thus far).
Reviewers: grosser, bollu, Meinersbur, etherzhhb, singam-sanjay
Reviewed By: grosser, Meinersbur
Subscribers: singam-sanjay, llvm-commits, pollydev, nemanjai, mgorny, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32431
llvm-svn: 302215
Polly comes in two library flavors: One loadable module to use the
LLVM framework -load mechanism, and another one that host applications
can link to. These have very different requirements for Polly's
own dependencies.
The loadable module assumes that all its LLVM dependencies are already
available in the address space of the host application, and is not allowed
to bring in its own copy of any LLVM library (including the NVPTX
backend in case of Polly-ACC).
The non-module library is intended to be linked to using
target_link_libraries. CMake would then resolve all of its dependencies,
including NVPTX and ensure that only a single instance of each library
will be used.
Differential Revision: https://reviews.llvm.org/D32442
llvm-svn: 301558
The isl unittest modified its PATH variable to point to the LLVM bin dir.
When building out-of-LLVM-tree, it does not contain the
polly-isl-test executable, hence the test fails.
Ensure that the polly-isl-test is written to a bin directory in the
build root, just like it would happen in an inside-LLVM build.
Then, change PATH to include that dir such that the executable in it
is prioritized before any other location.
llvm-svn: 301096
Unittests are linked against a subset of LLVM libraries and its
transitive dependencies resolved by CMake. The information about indirect
library dependency is not available when building separately from
LLVM, which result in missing symbol errors while linking.
Resolve this issue by querying llvm-config about the available
LLVM libraries and link against all of them, since dependence
information is still not available.
llvm-svn: 301095
Generate a PollyConfig.cmake for use with Cmake's find_package in
out-of-tree projects.
Contributed-by: Philip Pfaffe <philip.pfaffe@gmail.com>
Differential Revision: https://reviews.llvm.org/D30495
llvm-svn: 297395
This patch adds an option to build against a version of libisl already
installed on the system. The installation is autodetected using the
pkg-config file shipped with isl.
The detection of the library is in the FindISL.cmake module that creates
an imported target.
Contributed-by: Philip Pfaffe <philip.pfaffe@gmail.com>
Differential Revision: https://reviews.llvm.org/D30043
llvm-svn: 296361
This is currently the minimum required version by LLVM. Since LLVM is
needed to build Polly, we also require at least that version.
Suggested-by: Philip Pfaffe <philip.pfaffe@gmail.com>
llvm-svn: 295672
Remove the unused function get_system_libs. Instead, run
'llvm-config --system-libs' to determine which libraries are required in
addition LLVM's for linking an executable. At the moment these are the unittests
that link to gtest and transitively depend on these system libs.
llvm-svn: 279743
Add the infrastructure for unittests to Polly and two simple tests for
conversion between isl_val and APInt. In addition, a build target
check-polly-unittests is added to run only the unittests but not the regression
tests.
Clang's unittest mechanism served as as a blueprint which then was adapted to
Polly.
Differential Revision: https://reviews.llvm.org/D23833
llvm-svn: 279734
This previously was not required because in an out-of-tree build Polly would
only build libraries (LLVMPolly, libPolly, libPollyISL, libPollyPPCG), but no
executables where the libraries would be linked to. This will change when adding
unittests in a follow-up commit.
llvm-svn: 279730
The program 'llvm-lit', like 'not' and 'FileCheck' are necessary for running
check-polly. Warn of any of the three is not in LLVM_INSTALL_ROOT/bin directory.
llvm-svn: 279728
Instead of directly linking to ppcg's main source directory, we link to the
parent director. This allows us to access ppcg's include files with
'ppcg/cuda.h' and avoids a conflict with NVIDIA's cuda.h header.
Also drop an include directory that is currently not used.
llvm-svn: 275536
At this stage, we do not yet modify the IR but just generate a default
initialized ppcg_scop and gpu_prog and free both immediately. Both will later be
filled with data from the polly::Scop and are needed to use PPCG for GPU
schedule generation. This commit does not yet perform any GPU code generation,
but ensures that the basic infrastructure has been put in place.
We also add a simple test case to ensure the new code is run and use this
opportunity to verify that GPU_CODEGEN tests are only run if GPU code generation
has been enabled in cmake.
llvm-svn: 275389
There is no need to specifically match for isl, but we can exclude anything in
lib/External from formatting as we assume that externally contributed code
should always match the upstream code. This simplifies the cmake script and
allows additional external projects to be added without the need to explicitly
exclude them from formatting.
llvm-svn: 274557
This got accidentally dropped in r264283.
Also, drop the wwwfiles from the removal list. This is not needed any more as
we now explicitly list the directories that should be formatted.
llvm-svn: 264397
Refactor all ISL-related cmake build instructions into its own
CMakeLists.txt and build as a separate library.
This is useful to apply ISL-related build flags to ISL only and not to
Polly's files. Also, it the separation of both projects becomes clearer.
Proposed name of the library is Polly_isl. It is not "isl" to avoid
mix-up with potentially installed libisl.{a|so}.
Tested configurations:
- Windows with cmake 3.2
- Ubuntu with cmake 3.0.2
- Ubuntu with cmake 3.0.2 BUILD_SHARED_LIBS on
- Ubuntu with cmake 2.8.12.2 (LLVM minimum version)
- Ubuntu out-of-LLVM-tree
Differential Revision: http://reviews.llvm.org/D12810
llvm-svn: 248484
Summary:
Make clang-format run on each file independently using
add_custom_format (instead using a shell script in utils/). The targets
polly-{update|check}-format depend on these.
The primary motivation is to make them work on Windows, but also
improves them generally:
- Each file update/check can run in parallel (Although they do not take
long to run anyway)
- Implicit dependency on clang-format, so it recompiles if necessary
- polly-check-format shows the formatting difference if failing
Differential Revision: http://reviews.llvm.org/D12837
llvm-svn: 247581
When compiling Polly without LLVM sources but with system-installed
LLVM, the build process would not honor the LLVM_ENABLE_ASSERTIONS
setting LLVM was compiled with, but effectively assume that it is
switched off when compiling. During unit-tests llvm-lit would still
query the LLVM_ENABLE_ASSERTIONS flag and enable tests which require
assertions. Even if enabled for LLVM, Polly does not output its debug
info and statistics in this this mode such that 7 tests fail.
To fix, we query llvm-config --assertion-mode and if on, enable
assertions as HandleLLVMOptions.cmake would do.
We cannot reliably use HandleLLVMOptions.cmake itself as the host's
LLVM build might have been built using automake and distributions
change file locations (e.g. Debian to
/usr/share/llvm-${VERSION}/cmake/HandleLLVMOptions.cmake).
llvm-svn: 247470
Put all Polly targets into a single "Polly" category (i.e.
solution folder). Previously there was no recognizable scheme and most
categories contained just one or two targets or targets didn't belong
to any category.
Reviewers: grosser
llvm-svn: 242779
Remove the polly_headers_do_not_build project. Visual Studio is capable
of finding the headers itself, although they are not listed explicitly.
For explicit listing, the headers should be added to the relevant
target.
Reviewers: grosser
llvm-svn: 242777
There were two issues:
* ISL's configure generates include/isl/stdint.h, not isl/stdint.h as
assumed. This is also changed in the CMake build.
* Need to pass --with-int=imath to ISL's configure; the default is gmp.
Polly's configure has been regenerated due to changing configure.ac
llvm-svn: 240657
Currently the Polly repository contains the ISL sources with bogus
isl_config.h and gitversion.h. This is problematic. In this state a
macro
#define __attribute__(x)
becomes active in the source, leading to various problems e.g. when
included before system header files. This patch will instead generate
the two files specific to the host system at configure-time.
For CMake, we replicate the tests that ISL's configure performs using
try_compile(). In autotools build, we just invoke ISL's configure to
generate the two files. This consequently required regenerating
autoconf/configure.
'make dist' distributions of ISL contain a file GIT_HEAD_ID which
contains the version the distribution is derived from. The repository
files themselves do not contain such a hint. In a later commit we will
replace the isl directory by the contents of such a .tar.gz. It does
not contain the files imdrover.c iprime.c pi.c and rsamath.c currently
compiled into Polly, but not used and therefore are removed by this
patch.
In the long term we plan to generate a dedicated library for ISL instead
of adding its files to Polly.
This also does not yet include the switch to small-integer optimized ISL
nor enabling C99 mode required for the former. Those will come as well
in separate patches.
Differential version: http://reviews.llvm.org/D10603
Reviewers: grosser
llvm-svn: 240301
We do not have buildbots or anything that tests this functionality, hence it
most likely bitrots. People interested to use this functionality can always
recover it from svn history.
llvm-svn: 233570
With this patch Polly is always GPL-free (no dependency on GMP any more). As a
result, building and distributing Polly will be easier. Furthermore, there is no
need to tightly coordinate isl and Polly releases anymore.
We import isl b3e0fa7a05d as well as imath 4d707e5ef2. These are the git
versions Polly currently was tested with when using utils/checkout_isl.sh. The
imported libraries are both MIT-style licensed.
We build isl and imath with -fvisibility=hidden to avoid clashes in case other
projects (such as gcc) use conflicting versions of isl. The use of imath can
temporarily reduce compile-time performance of Polly. We will work on
performance tuning in tree.
Patches to isl should be contributed first to the main isl repository and can
then later be reimported to Polly.
This patch is also a prerequisite for the upcoming isl C++ interface.
llvm-svn: 228193
This commit drops the Cloog support for Polly. The scripts and
documentation are changed to only use isl as prerequisity. In the code
all Cloog specific parts have been removed and all relevant tests have
been ported to the isl backend when it was created.
llvm-svn: 223141
Arcanist (arc) will now always run linters before uploading any new
commit to Phabricator. All errors/warnings (or their absence) will be
shown in the web interface together with a explanation by the commiter
(arcanist will ask the commiter if the build was not clean).
The linters include:
- clang-format
- spelling check
- permissions check (aka. chmod)
- filename check
- merge conflict marker check
Note, that their scope is sometimes limited (see .arclint for
details).
This commit also fixes all errors and warnings these linters reported,
namely:
- spelling mistakes and typos
- executable permissions for various text files
Differential Revision: http://reviews.llvm.org/D4916
llvm-svn: 215871
