Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
Use both LLDB- and LLVM-specific tool/library directories when LLDB is
being built stand-alone. This ensures that the freshly-built tools
(and libraries) are used correctly.
Without this patch, the test suite uses LLVM_TOOLS_DIR and LLVM_LIBS_DIR
to locate lldb, and set PATH and LD_LIBRARY_PATH. When doing
a stand-alone build, these variables represent the installed LLVM.
As a result, tests either fail due to missing lldb executable
or use an earlier installed LLDB version rather than the one being
built.
To solve this, additional LLDB_TOOLS_DIR and LLDB_LIBS_DIR variables
are added and populated using LLVM_*_OUTPUT_INTDIR. Those variables
contain directories used to output built executables and libraries.
In stand-alone builds, they represent the build-tree directories
used by LLDB. In integrated builds, they have the same values as
LLVM_*_DIR and therefore using them does not harm.
The new variables are prepended to PATH and LD_LIBRARY_PATH to ensure
that freshly built binaries are preferred over potentially earlier
installed ones. Furthermore, paths used to locate various tools are
updated to match appropriate locations.
Differential Revision: https://reviews.llvm.org/D29985
llvm-svn: 295621
unittest/Utility to unittest/Target so the unit
tests can be run from xcode again.
The diff is enormous - I think zachary might have
put windows line endings or something with his last
commit? didn't look too closely but his commit & this
commit have every line being different.
llvm-svn: 295530
The testsuite's results formatter maintains a result_status_counts
structure solely for the purpose of setting the return status code
after the testsuite has run. This data is redundant with the
result_events structure that contains the results of individual
tests.
There are subtle bugs arising from this redundancy that make some
builds report no errors but a nonzero status. Rather than try to
make sure these two are always in agreement, I've just rewritten
the code that used to use the counts to now use the per-test
results.
<rdar://problem/30496966>
llvm-svn: 295522
Summary:
There have been a few new values added to a few LLVM enums
this change makes sure that LLDB code handles them correctly.
Reviewers: labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30005
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 295445
The way of injecting an error into the printf call was not working on
darwin - the C library still happily format the character. It only
returns an error after we use a wide character that does not fit into a
single byte, so switch the test to use that.
llvm-svn: 295443
Changes wrt. previous version:
- add #include <atomic>: fix build on windows
- add extra {} around the string literals used to initialize
llvm::StringLiteral: fix gcc build
llvm-svn: 295442
In the case we are stepping over the thread creation instruction, we
will end up calling Thread::SingleStep back-to-back twice (because of
the intermediate PTRACE_EVENT_CLONE stop). This will cause the cpu mask
to be set inappropriately (because the old SingleStepCheck object will
be destroyed after we create the new one), and the single-step will
fail.
Before the refactor the code was still incorrect in this case, but in a
different way (the thread was left with the incorrect mask after the
stepping was complete), so this was not easy to spot.
This fixes TestCreateDuringInstructionStep on the affected devices.
llvm-svn: 295440
While refactoring the code in r293046 I made a very basic error -
relying on destructor side-effects of a copyable object. Fix that and
make the object non-copyable.
This fixes the tests on the platforms that need this workaround, but
unfortunately we don't have a way to make a more platform-agnostic test
right now.
llvm-svn: 295345
TSan now has the ability to report races on "external" object, i.e. any library class/object that has read-shared write-exclusive threading semantics. The detection and reporting work almost out of the box, but TSan can now provide the type of the object (as a string). This patch implements this into LLDB.
Differential Revision: https://reviews.llvm.org/D30024
llvm-svn: 295342
effects was passed as an expression to assert() calls. If lldb is
built without asserts, the expression was eliminated and we lost
the side effects -- these methods stopped working.
<rdar://problem/30342959>
llvm-svn: 295271
Summary:
We currently have two log channel registration mechanisms. One uses a
set of function pointers and the other one is based on the
PluginManager.
The PluginManager dependency is unfortunate, as logging
is also used in lldb-server, and the PluginManager pulls in a lot of
classes which are not used in lldb-server.
Both approach have the problem that they leave too much to do for the
user, and so the individual log channels end up reimplementing command
line argument parsing, category listing, etc.
Here, I replace the PluginManager-based approach with a one. The new API
is more declarative, so the user only needs to specify the list of list
of channels, their descriptions, etc., and all the common tasks like
enabling/disabling categories are hadled by common code. I migrate the
LogChannelDWARF (only user of the PluginManager method) to the new API.
In the follow-up commits I'll replace the other channels with something
similar.
Reviewers: clayborg, zturner, beanz
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D29895
llvm-svn: 295190
Summary:
It turns out listing each library twice is not enough to resolve all
references in a debug build on linux - a number of executables fails to
link with random symbols missing. Increasing the number to three seems
to be enough. The choice of lldbCore to set the multiplicity on is
somewhat arbitrary, but it seems fitting, as it is the biggest layering
transgressor.
Reviewers: beanz
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D29888
llvm-svn: 295189
Summary:
GCC emits also symbols for the __PRETTY_FUNCTION__ virtual variable,
which we accidentaly pick up when looking for functions for with
"unique_function_name" in the name. This makes the target.FindFunctions
call fail, as that symbol is not a function.
I also strenghten the test a bit to make sure we actually find all the
functions we are interested in. I've put a check that we find at least 6
functions, but maybe this should be *exactly* 6 ?
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29932
llvm-svn: 295170
With this patch, the only dependency left is from Utility
to Host. After this is broken, Utility will finally be
standalone.
Differential Revision: https://reviews.llvm.org/D29909
llvm-svn: 295088
Summary:
We've had two ways to print a "debug" log message.
- Log::GetDebug() was testing a Stream flag which was never set.
- Log::Debug() was checking for the presence of "log enable --debug"
flag.
Given that these two were used very rarely and we already have a
different way to specify "I want a more verbose log", I propose to remove
these two functions and migrate the callers to LLDB_LOGV. This commit
does that.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29823
llvm-svn: 294939
and use it in the appropriate log statements.
Formatting of chrono types in log messages was very clunky. This should
make it much nicer to use and give better output. For details of the
formatting options see the chrono formatter in llvm.
llvm-svn: 294738
This test is flaky on the windows->android bot. Change assertTrue to
assertEqual in the hope better error messages will direct us to the
problem.
llvm-svn: 294737
Summary:
This converts LLDB's logging to use llvm streams instead of
lldb_private::Stream and friends. The changes are mostly
straight-forward and amount to s/lldb_private::Stream/llvm::raw_ostream.
The part worth calling out is the rewrite of the StreamCallback class.
Previously this class contained a per-thread buffer of data written. I
assume this had something to do with it trying to make sure each log
line is delivered as a single event, instead of multiple (possibly
interleaved) events. However, this is no longer relevant as the Log
class already writes things to a temporary buffer and then delivers the
message as a single "write", so I have just removed the code in
question.
Reviewers: zturner, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29615
llvm-svn: 294736
After many expressions are evaluated we were spending time looking for open blocks on memory in the one or more AllocatedBlock objects and it would slow down expression evaluation.
I implemented a fixed size blocks implementation that maintains a sorted free list to fix the issue.
<rdar://problem/17962974>
llvm-svn: 294600
CommandObjectVersion.cpp calls lldb_private::GetVersion (present in lldbBase).
This should fix the unittest link on windows. I am not sure why is this not
present on other platforms -- my guess is that there lldbBase is included in
the link through some other dependency chain.
llvm-svn: 294549
Summary:
This patch removes the over-specified dependencies from LLDBDependencies and instead relies on the dependencies as expressed in each library and tool.
This also removes the library looping in favor of allowing CMake to do its thing. I've tested this patch on Darwin, and found no issues, but since linker semantics vary by system I'll also work on testing it on other platforms too.
Help testing would be greatly appreciated.
Reviewers: labath, zturner
Subscribers: danalbert, srhines, mgorny, jgosnell, lldb-commits
Differential Revision: https://reviews.llvm.org/D29352
llvm-svn: 294515
Inspired by r294145 for NetBSD, this reduces diffs between the FreeBSD
and Linux/NetBSD Platform implementations. Further diff reduction will
occur once FreeBSD switches to using the remote process plugin.
Differential Revision: https://reviews.llvm.org/D29667
llvm-svn: 294340
Instead just rely on LLDB_LOG().
This is part of an effort to sort out dependency hell in LLDB.
Error is in Utility, but Log is in Core. Core can depend on
Utility, but not vice versa. So this patch moves the knowledge
about how to log Errors from the Error class to the Log file.
Differential Revision: https://reviews.llvm.org/D29514
llvm-svn: 294210
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
Summary:
Update the code to the new world code.
These changes are needed for remote process plugin.
Sponsored by <The NetBSD Foundation>
Reviewers: emaste, clayborg, joerg, labath
Reviewed By: clayborg, labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29266
llvm-svn: 294145
don't create a platform.linux setting category, as it contains no
actual settings, and I don't forsee adding any soon. Also remove some
unused includes while I'm in there.
llvm-svn: 294114
Summary:
Per discussion in D28616, having two ways two request logging (log
enable lldb XXX verbose && log enable -v lldb XXX) is confusing. This
removes the first option and standardizes all code to use the second
one.
I've added a LLDB_LOGV macro as a shorthand for if(log &&
log->GetVerbose()) and switched most of the affected log statements to
use that (I've only left a couple of cases that were doing complex
computations in an if(log) block).
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29510
llvm-svn: 294113
Summary:
The current version of LLDB installs six.py into global python library directory. This approach produces conflicts downstream with distribution's py-six copy.
Introduce new configure option LLDB_USE_SYSTEM_SIX (disabled by default). Once specified as TRUE, six.py won't be installed to Python's directory.
Add new option in finishSwigWrapperClasses.py, namely --useSystemSix.
Sponsored by <The NetBSD Foundation>
Reviewers: mgorny, emaste, clayborg, joerg, labath
Reviewed By: labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29405
llvm-svn: 294071
Summary:
- GetFileWithUUID: All platforms except PlatformDarwin had this.
However, I see no reason why this code would not apply there as well.
- GetProcessInfo, FindProcesses: The implementation was the same in all classes.
- GetFullNameForDylib: This code should apply to all non-darwin
platforms. I've kept the PlatformDarwin override as the situation is
different there.
Reviewers: clayborg, krytarowski, emaste
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29496
llvm-svn: 294019
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
We started passing the list of libraries to link to the
add_lldb_unittest macro, but that macro wasn't actually doing anything
with them. Fix that.
llvm-svn: 293913
Summary:
various platforms very using nearly identical code for this method. As far as I
can tell there was nothing platform-specific about the differences, but rather
it looked like it was caused by tiny tweaks being made to individual copies
without affecting the overall functionality. I have taken the superset of all
these tweaks and put it into one method in the base class (incidentaly, nobody
was using the base class implementation of the method, as all classes were
overriding it). From the darwin class I took the slightly improved error
reporting (checking whether the file is readable) and the
ResolveExecutableInBundle call (which has no effect elsewhere as the function
is already a no-op on non-darwin platforms). From the linux class I took the
set-the-triple-vendor-to-host-if-unspecified tweak (present in PlatformKalimba
as well).
PlatformWindows has an identical copy as well. We could resolve that by pushing
this code further down into Platform class, that that would require pushing the
m_remote_platform_sp member as well, which seems like a bad design choice.
Reviewers: clayborg, emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29406
llvm-svn: 293910
print the path being requested.
Change the GetInfoItemByPathAsString docuemtnation in
the .i file to use docstring instead of autodoc so
the function signature is included in the python
help.
<rdar://problem/29999567>
llvm-svn: 293858
Summary:
Currently, in the default configuration, the "install" target will
install all llvm executables unversioned, except for three lldb tools
which will be installed versioned (with a non-versioned symlink). This
rectifies that situation.
Reviewers: beanz, sylvestre.ledru, mgorny
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D29126
llvm-svn: 293803
Summary:
Cannot pass object of non-POD type 'const CMIUtilString' through variadic function.
This behavior is undefined according to C++11 5.2.2/7:
> Passing a potentially-evaluated argument of class type having a non-trivial copy constructor, a non-trivial move contructor, or a non-trivial destructor, with no corresponding parameter, is conditionally-supported with implementation-defined semantics.
Replace SetErrorDescriptionn(errMsg); with SetErrorDescription(errMsg);
Original patch by Tobias Nygren (NetBSD).
Sponsored by <The NetBSD Foundation>
Reviewers: clayborg, labath, emaste, joerg, ki.stfu
Reviewed By: labath, ki.stfu
Subscribers: tnn, ki.stfu, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29256
llvm-svn: 293774
Summary:
Use ProcessLauncherPosixFork in Linux and NetBSD.
Changes to ProcessLauncherLinux:
- Limit personality.h and ASLR code to Linux.
- Reuse portable ptrace(2) PT_TRACE_ME operation available on Linux and BSDs.
- Limit ETXTBSY error path from execve(2) to Linux.
- In LaunchProcess declaration change virtual to override.
This code should be readily available for FreeBSD.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, labath, emaste
Reviewed By: labath
Subscribers: danalbert, srhines, mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29347
llvm-svn: 293768
Mac OS X 10.11, El Capitan, released c. Oct 2015) I conditionalized
the use of the framework on "if sdk == macosx 10.11". But since
macOS 10.12 has shipped this year, the framework was no longer being
built in. I can either start listing every OS 10.11 and newer, or
remove the version check.
This will break building lldb with xcodebuild / Xcode for people
running Mac OS X 10.10 or older. If so, I'll back this change out.
I'm not sure if we have many people working on macs running the
older OSes on their build systems.
<rdar://problem/30159130>
llvm-svn: 293742
Summary:
Problem:
There are three filelds in the ELF header - e_phnum, e_shnum, and e_shstrndx -
that could be bigger than 64K and therefore do not fit in 16 bits reserved for
them in the header. If this happens, pretty often there is a special section at
index 0 which contains their real values for these fields in the section header
in the fields sh_info, sh_size, and sh_link respectively.
Fix:
- Rename original fields in the header declaration. We want to have them around
just in case.
- Reintroduce these fields as 32-bit members at the end of the header. By default
they are initialized from the header in Parse() method.
- In Parse(), detect the situation when the header might have been extended into
section info #0 and try to read it from the same data source.
- ObjectFileELF::GetModuleSpecifications accesses some of these fields but the
original parse uses too small data source. Re-parse the header if necessary
using bigger data source.
- ProcessElfCore::CreateInstance uses header with potentially sentinel values,
but it does not access these fields, so a comment here is enough.
Reviewers: labath
Reviewed By: labath
Subscribers: davidb, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29095
Author: Eugene Birukov <eugenebi@hotmail.com>
llvm-svn: 293714
Summary:
This patch does two things. First it updates all the ABI plugins with accurate dependencies, and second it adds a tracking mechanism for add_lldb_library to denote plugin libraries, allowing us to build up a list of all the configured plugins.
This list of generated plugins will be used during generating liblldb so that we can link all the plugins into the library.
If this patch looks good I will update all the other plugins in subsequent patches.
Reviewers: labath, zturner
Subscribers: nemanjai, mgorny, lldb-commits, jgosnell
Differential Revision: https://reviews.llvm.org/D29348
llvm-svn: 293696
This change reverts the lldb-server part of r293686, which is having trouble on Linux bots. I'm not sure if I can make lldb-server work correctly until the full dependency graph is fixed.
llvm-svn: 293690
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
The Boundary Table Entries are stored in the application memory and allow
to store boundary info for all the pointers of the program, also those that
otherwise wouldn't fit in the 4 bound registers provided by the HW.
Here is an example of how it works:
* mpx-table show <pointer>
lbound = 0x..., ubound = 0x..., (pointer value = 0x..., metadata = 0x...)
* mpx-table set <pointer>
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29078
llvm-svn: 293660
This patch adds CMake options to add_lldb_library and add_lldb_executable for specifying LLVM components and direct library links.
This patch is NFC, but it is a small separable bit of a series of much larger patches that I'll be landing over the next day or two.
llvm-svn: 293647
Summary:
To retrieve the native thread ID there must be called _lwp_self().
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, emaste, labath
Reviewed By: joerg, clayborg, labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29264
llvm-svn: 293625
Summary:
Remove dependency on the proc (/proc) filesystem, which is optional.
KERN_PROC_PATHNAME is available in NetBSD-current and will land NetBSD 8.0.
Older stable versions of NetBSD will not be supported.
Sponsored by <The NetBSD Foundation>
Reviewers: emaste, joerg, labath, clayborg
Reviewed By: clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29089
llvm-svn: 293392
Summary:
Real-Time Signals are available in NetBSD-current and will land NetBSD 8.0.
Older stable versions of NetBSD will not be supported.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, clayborg, emaste
Reviewed By: labath, clayborg, emaste
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29091
llvm-svn: 293391
header line, backtrace output) was to remove the current pc value
from frames where we have source level information. We've been
discussing this for the past week and based on input from a group
of low level users, I believe this is the wrong default behavior
for the command line lldb tool.
lldb's backtrace will include the pc value for all stack frames
regardless of whether they have source level debug information or
not.
A related part of r286288 removes the byte offset printing for
functions with source level information (e.g. "main + 22 sourcefile.c:10"
is printed as "main sourcefile.c:10"). I don't see a compelling
case for changing this part of 286288 so I'm leaving that as-is
(in addition to the rest of 286288 which is clearly better than
the previous output style).
<rdar://problem/30083904>
llvm-svn: 293366
I foolishly thought I could simplify the condition to cover all android
targets. I was wrong - i386 headers don't define __NR_accept.
Revert back to enabling the workaround on arm an mips only.
llvm-svn: 293282
This moves the accept hack from the android toolchain file into
LLDBConfig.cmake. This allows successful lldb android compilation
without relying on our custom toolchain file.
llvm-svn: 293281
requires that this private framework be available - and it is not
available earlier than macOS 10.12 - to build lldb), dlopen the
framework binary on demand in debugserver. We're already using
dlsym() to look up all the symbols so there is no need to use weak
linking here.
<rdar://problem/30158797>
llvm-svn: 293135
The main motivation for me doing this is being able to build an arm
android lldb-server against api level 9 headers, but it seems like a
good cleanup nonetheless.
The entirety of the cpu_set_t dance now resides in SingleStepCheck.cpp,
which is only built on arm64.
llvm-svn: 293046
Summary: This commit adds an option to set PC to the entry point of the file loaded using "target module load" command. In D28804, Greg asked me to separate this part under a different option.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28944
llvm-svn: 292989
Summary: LLDB was using packet size advertised by the target as the max memory size to write in one go. It is wrong because packets have other overhead apart from memory payload. Also memory transferred through 'm' and 'M' packets needs 2 bytes in packet to transfer 1 of memory.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28808
llvm-svn: 292987
It turns out things are not as simple as I hoped. sys/personality.h
exists on all androids but it does not define the required symbols on
all platform levels.
Add a compile check for platform level to compile against both new and
old android headers.
llvm-svn: 292939
Implementation of software single step for FreeBSD on ARM. The code is
largely based on the Linux implementation of the same functionality.
Patch by Dmitry Mikulin!
Differential Revision: https://reviews.llvm.org/D25756
llvm-svn: 292937
On android API level 9 the header does not get included transitively.
Include it directly.
As far as I can see, all non-windows platforms should have this header.
If that turns out to be incorrect, we can add some ifdefs around that.
llvm-svn: 292931
which led to
ERROR: test_auxv_chunked_reads_work_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_auxv_data_is_correct_size_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_auxv_keys_look_valid_debugserver (tools/lldb-server/TestGdbRemoteAuxvSupport.py)
ERROR: test_qSupported_returns_known_stub_features_debugserver (tools/lldb-server/TestLldbGdbServer.py)
failures because debugserver was advertising compression being available, e.g.
send packet: $qSupported:xmlRegisters=i386,arm,mips#12
read packet: $qXfer:features:read+;PacketSize=20000;qEcho+;SupportedCompressions=zlib-deflate;DefaultCompressionMinSize=384#00
maybe these tests should be a little more accepting of additional
features. but I didn't mean for this to be enabled on mac native.
llvm-svn: 292890
Summary:
getcwd() is not available (well.. um.. deprecated?) on windows, and the way
PosixApi.h is providing it causes strange compile errors when it's included in
the wrong order. The best way to avoid that is to just not use chdir.
This replaces all uses of getcwd in generic code. There are still a couple of
more uses, but these are in platform-specific code.
chdir() is causing a similar problem, but for that there is no llvm equivalent
for that (yet).
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28858
llvm-svn: 292795
Summary:
The server was no longer sending the thread PCs the way the client
expected them.
I changed the server to send them back as a threadstop info field,
similar to the Apple version of the server.
I also changed the client to look for them there, before querying the
server.
I added a test to ensure the server doesn't stop sending them.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D28880
Author: Jason Majors
llvm-svn: 292611
For bare-metal targets, lldb was missing a command like 'load' in gdb
which can be used to create executable image on the target. This was
discussed in
http://lists.llvm.org/pipermail/lldb-dev/2016-December/011752.html
This commits adds an option to "target module load" command to provide
that functionality. It does not set the PC to entry address which will
be done separately.
Reviewed in https://reviews.llvm.org/D28804
llvm-svn: 292499
Use the LLDB_LOG macro instead of the more verbose if(log) ... syntax.
I have also consolidated the log channels (everything now goes to the posix
channel, instead of a mixture of posix and lldb), and cleaned up some of the
more convoluted log statements.
llvm-svn: 292489
starts up, we need to clear the target's image list and only add
the binaries into the target that are actually present in this
process run.
<rdar://problem/29857613>
llvm-svn: 292454
This adds the LLDB_LOG macro, which enables one to write more succinct log
statements.
if (log)
log->Printf("log something: %d", var);
becomes
LLDB_LOG(log, "log something: {0}, var);
The macro still internally does the "if(log)" dance, so the arguments are only
evaluated if logging is enabled, meaning it has the same overhead as the
previous syntax.
Additionally, the log statements will be automatically prefixed with the file
and function generating the log (if the corresponding new argument to the "log
enable" command is enabled), so one does not need to manually specify this in
the log statement.
It also uses the new llvm formatv syntax, which means we don't have to worry
about PRIx64 macros and similar, and we can log complex object (llvm::StringRef,
lldb_private::Error, ...) more easily.
Differential Revision: https://reviews.llvm.org/D27459
llvm-svn: 292360
Summary:
The NDK cmake toolchain file defines CMAKE_SYSTEM_NAME=Android, so switch the
build to use that. I have also updated the in-tree toolchain file to do that
(instead of defining __ANDROID_NDK__), so it can still be used to build.
After migrating the last bits of non-toolchainy bits out of the in-tree
toolchain, I intend to delete it.
Reviewers: tberghammer, danalbert
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D28775
llvm-svn: 292212
The unit test I added in the previous commit discovered a bug in
PrependPathComponent on windows -- it was calling SetFile with the host native
path syntax, whereas it should be explicitly specifying the path syntax (as
AppendPathComponent does). This fixes it.
llvm-svn: 292106
Summary:
PrependPathComponent was unconditionally inserting path separators between the
path components. This is not correct if the prepended path is "/", which caused
problems down the line. Fix the function to use the same algorithm as
AppendPathComponent and add a test. This fixes one part of llvm.org/pr31611.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28677
llvm-svn: 292100
We are going to turn off buffer overflow introduced by gcc by turning off
FORTIFY_SOURCE.
Differential revision: https://reviews.llvm.org/D28666
llvm-svn: 291949
Summary:
I came across this while trying to understand what Log::Debug does. It turns out
it does not do anything, as there is no instance of someone setting a debug flag
on a stream. The same is true for the Verbose and AddPrefix flags. Removing
these will enable some cleanups in the Logging class, and it brings us closer
towards the long term goal of standardizing on llvm stream classes.
I have removed these flags and all code the code which tested for their
presence -- there wasn't much of it, mostly in SymbolFileDWARF, which is
probably going away at some point anyway.
The eBinary flag still has some users, so I am letting it life for the time
being.
Reviewers: clayborg, zturner
Subscribers: aprantl, beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D28616
llvm-svn: 291895
Summary:
The formatter supports the same options as the string-like classes, i.e. the
ability to truncate the displayed string. I don't anticipate it would be much
used, but it seems consistent.
Reviewers: zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D28519
llvm-svn: 291759
Previously it failed to handle nested types inside templated classes
making it impossible to look up these types using the fully qualified
name.
Differential revision: https://reviews.llvm.org/D28466
llvm-svn: 291559
The llvm_config hack for lldb-server is only necessary for !DYLIB builds, as
otherwise we would get unresolved symbols from lldb libraries which do not track
their dependencies correctly (all of them). In a DYLIB build, the so will
already be added to the link dependencies and we can use that to resolve all
missing symbols.
The proper fix for this would be to have each lldb library track its
dependencies correctly.
llvm-svn: 291555
We currently limit the length of TSan returned backtraces to 8, which is not necessary (and a bug, most likely). Let's remove this.
Differential Revision: https://reviews.llvm.org/D28035
llvm-svn: 291522
Aleksey Shlyapnikov found the memory leak I introduced, recommitted the
Clang change with a fix for this.
This reapplies r291200 reverted in r291250
llvm-svn: 291271
Older clangs (<=3.6) complain about a redefinition when we try to specialize a
templace function declared with = delete. Instead, I just don't define the
function body, which will trigger a linker error if someone tries to use an
unknown function.
llvm-svn: 291226
Summary:
To implement wide character reading, editline was mixing FILE*-based access with
a Connection-based one (plus it did some selects on the raw FD), which is very
fragile. Here, I replace it with one which uses only a Connection-based reads.
The code is somewhat longer as I had to read characters one by one to detect the
end of the multibyte sequence.
I've verified that international characters still work in lldb command line on
OSX.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28356
llvm-svn: 291220
Wasn't sure I could include ErrorHandling.h here, and evidently I wasn't
building this part (must've made the change using sed after getting
tired of fixing each compilation error individually).
llvm-svn: 291204
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
Summary:
Some of the mi commands implemented in lldb-mi are incomplete/not confirming to the spec.
- `gdb-show` and `gdb-set` doesn't support getting/setting `disassembly-flavor`
- `environment-cd` should also change the working directory for inferior
- debugger CLI output should be printed as console-stream-output record, rather than being dumped directly
to stdout
- `target-select` should provide inner error message in mi response
Related bug report:
- https://llvm.org/bugs/show_bug.cgi?id=28026
- https://llvm.org/bugs/show_bug.cgi?id=28718
- https://llvm.org/bugs/show_bug.cgi?id=30265
Reviewers: ki.stfu, abidh
Subscribers: abidh, ki.stfu, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D24711
llvm-svn: 291104
Added an extra field parser to the `RSModuleDescriptor` class enabling us to
check whether the versions of LLVM used to generated the debug symbols match
across the RenderScript compiler frontend (llvm-rs-cc) and backend (bcc); if
they do not, we warn the user that the debugging experience may be suboptimal
as LLVM IR debug information has no compatibility guarantees.
llvm-svn: 290957
lldb-gtest binary that xcode builds for -scheme lldb-gtest; these tests
won't run on macosx systems. Fixes testsuite failures we started
seeing after 290819.
<rdar://problem/29853778>
llvm-svn: 290917
Previously it parsed /proc/<pid>/maps for every module separately
resulting in a very slow response time. This CL add some caching and
optimizes the implementation to improve the code from O(n*m) to O(n+m)
where n is the number of modules requested and m is the number of
files mapped into memory.
Differential revision: https://reviews.llvm.org/D28233
llvm-svn: 290895
