When running `target module lookup` command, show the name of absolute
symbols. Also fix indentation issue after printing an absolute symbol.
Reviewed By: clayborg, DavidSpickett
Differential Revision: https://reviews.llvm.org/D134516
This adds a line break between each result address in the output of the
lldb command `target modules lookup`. Before this change, a new address
result will be printed on the same line as the summary of the last
result, making the output difficult to view.
Also adds a test for this command.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134111
Symbols that have the section index of SHN_ABS were previously creating extra top level sections that contained the value of the symbol as if the symbol's value was an address. As far as I can tell, these symbol's values are not addresses, even if they do have a size. To make matters worse, adding these extra sections can stop address lookups from succeeding if the symbol's value + size overlaps with an existing section as these sections get mapped into memory when the image is loaded by the dynamic loader. This can cause stack frames to appear empty as the address lookup fails completely.
This patch:
- doesn't create a section for any SHN_ABS symbols
- makes symbols that are absolute have values that are not addresses
- add accessors to SBSymbol to get the value and size of a symbol as raw integers. Prevoiusly there was no way to access a symbol's value from a SBSymbol because the only accessors were:
SBAddress SBSymbol::GetStartAddress();
SBAddress SBSymbol::GetEndAddress();
and these accessors would return an invalid SBAddress if the symbol's value wasn't an address
- Adds a test to ensure no ".absolute.<symbol-name>" sections are created
- Adds a test to test the new SBSymbol APIs
Differential Revision: https://reviews.llvm.org/D131705
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
This reverts commit 9429b67b8e300e638d7828bbcb95585f85c4df4d.
It broke the build on Windows, see comments on https://reviews.llvm.org/D130309
It also reverts these follow-ups:
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit f959d815f4637890ebbacca379f1c38ab47e4e14.
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit 0bbce7a4c2d2bff622bdadd4323f93f5d90e6d24.
Revert "Cache the value for absolute path in FileSpec."
This reverts commit dabe877248b85b34878e75d5510339325ee087d0.
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
Refactor the command option enum values and the command argument table
to connect the two. This has two benefits:
- We guarantee that two options that use the same argument type have
the same accepted values.
- We can print the enum values and their description in the help
output. (D129707)
Differential revision: https://reviews.llvm.org/D129703
Add `pcm-info` to the `target module dump` subcommands.
This dump command shows information about clang .pcm files. This command
effectively runs `clang -module-file-info` and produces identical output.
The .pcm file format is tightly coupled to the clang version. The clang
embedded in lldb is not guaranteed to match the version of the clang executable
available on the local system.
There have been times when I've needed to view the details about a .pcm file
produced by lldb's embedded clang, but because the clang executable was a
slightly different version, the `-module-file-info` invocation failed. With
this command, users can inspect .pcm files generated by lldb too.
Differential Revision: https://reviews.llvm.org/D129456
This is currently being done in an ad hoc way, and so for some
commands it isn't being checked. We have the info to make this check,
since commands are supposed to add their arguments to the m_arguments
field of the CommandObject. This change uses that info to check whether
the command received arguments in error.
A handful of commands weren't defining their argument types, I also had
to fix them. And a bunch of commands were checking for arguments by
hand, so I removed those checks in favor of the CommandObject one. That
also meant I had to change some tests that were checking for the ad hoc
error outputs.
Differential Revision: https://reviews.llvm.org/D128453
This fixes an issue that, when you start lldb or use `target create`
with a program name which is on $PATH, or not specify the .exe suffix of
a program in the working directory on Windows, you get a confusing
error, for example:
(lldb) target create notepad
error: 'C:\WINDOWS\SYSTEM32\notepad.exe' doesn't contain any 'host'
platform architectures: i686, x86_64, i386, i386
Fixes https://github.com/mstorsjo/llvm-mingw/issues/265
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D127436
Register positional argument details in `CommandObjectTargetModulesList`.
I recently learned that `image list` takes a module name, but the help info
does not indicate this. With this change, `help image list` will show that it
accepts zero or more module names.
This makes it easier to get info about specific modules, without having to
find/grep through the full image list.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D125154
Nowhere in lldb do we call this with a null pointer.
If we did, the first line of the function would fault anyway.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D125218
a debug session with only a remote path to the file you are debugging
using the SB API's. This patch makes it possible to do this using
target create --remote-file <some_path> without supplying a local file
as well.
Prior to this change we errored out saying that we haven't implemented
copying the binary back from the remote. I didn't implement the copy
back (in the case I'm interested in - iOS debugging - we don't
actually have a way for lldb to do that). This patch doesn't impede
doing that, I just didn't need it. I think for some object file
formats debugging w/o the binary file is hard because of what doesn't
get mapped in. I didn't try to arbitrate that, I'm assuming anybody
who has to do this knows what they are going to get.
If there's a connected platform that can check that the remote file
exists, it will do so, otherwise we trust the user's input - if it
isn't there the process launch is going to fail with no-such-file so
it will be pretty clear what went wrong.
Differential Revision: https://reviews.llvm.org/D124947
This adds a setting (`target.max-children-depth`) that will provide a default value for the `--depth` flag used by `expression` and `frame variable`.
The new setting uses the same default that's currently fixed in source: `UINT32_MAX`.
This provides two purposes:
1. Allowing downstream forks to provide a customized default.
2. Allowing users to set their own default.
Following `target.max-children-count`, a warning is emitted when the max depth is reached. The warning lets users know which flags or settings they can customize. This warning is shown only when the limit is the default value.
rdar://87466495
Differential Revision: https://reviews.llvm.org/D123954
Applied modernize-use-equals-default clang-tidy check over LLDB.
This check is already present in the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121844
This allows `image lookup -a ... -v` to print variables only if the given
address is covered by the valid ranges of the variables. Since variables created
in dwarf plugin always has empty scope range, print the variable if it has
empty scope.
Differential Revision: https://reviews.llvm.org/D119963
This patch changes the return value of Platform::GetName() to a
StringRef, and uses the opportunity (compile errors) to change some
callsites to use GetPluginName() instead. The two methods still remain
hardwired to return the same thing, but this will change once the ideas
in
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>
are implemented.
Differential Revision: https://reviews.llvm.org/D119146
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
The amount of roundtrips between StringRefs, ConstStrings and std::strings is
getting a bit out of hand, this patch avoid the unnecessary roundtrips.
Reviewed By: wallace, aprantl
Differential Revision: https://reviews.llvm.org/D112863
This adds the `target dump typesystem'`command which dumps the TypeSystem of the
target itself (aka the 'scratch TypeSystem'). This is similar to `target modules
dump ast` which dumps the AST of lldb::Modules associated with a selected
target.
Unlike `target modules dump ast`, the new command is not a subcommand of `target
modules dump` as it's not touching the modules of a target at all. Also unlike
`target modules dump ast` I tried to keep the implementation language-neutral,
so this patch moves our Clang `Dump` to the `TypeSystem` interface so it will
also dump the state of any future/downstream scratch TypeSystems (e.g., Swift).
That's also why the command just refers to a 'typesystem' instead of an 'ast'
(which is only how Clang is necessarily modelling the internal TypeSystem
state).
The main motivation for this patch is that I need to write some tests that check
for duplicates in the ScratchTypeSystemClang of a target. There is currently no
way to check for this at the moment (beside measuring memory consumption of
course). It's probably also useful for debugging LLDB itself.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D111936
Currently you can ask the target symbols add command to locate the debug
symbols for the current frame. This patch add an options to do that for
the whole call stack.
Differential revision: https://reviews.llvm.org/D110011
This moves the logic for adding symbols based on UUID, file and frame
into little helper functions. This is in preparation for D110011.
Differential revision: https://reviews.llvm.org/D110010
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
Mostly by converting uses of GetErrorStream to AppendError,
so that the call to SetStatus is implicit.
Some remain where it isn't certain that you'll have a message
to set, or you want the output to be on stdout.
One place in CommandObjectWatchpoint previously didn't set
the status to failed at all. However it's pretty obvious
that it should do so.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104697
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
A long time ago LLDB wanted to start using StringRef instead of
C-Strings/ConstString but was blocked by the fact that the StringRef constructor
that takes a C-string was asserting that the C-string isn't a nullptr. To
workaround this, D24697 introduced a special function called `withNullAsEmpty`
and that's what LLDB (and only LLDB) started to use to build StringRefs from
C-strings.
A bit later it seems that `withNullAsEmpty` was declared too awkward to use and
instead the assert in the StringRef constructor got removed (see D24904). The
rest of LLDB was then converted to StringRef by just calling the now perfectly
usable implicit constructor.
However, all the calls to `withNullAsEmpty` just remained and are now just
strange artefacts in the code base that just look out of place. It's also
curiously a LLDB-exclusive function and no other project ever called it since
it's introduction half a decade ago.
This patch removes all uses of `withNullAsEmpty`. The follow up will be to
remove the function from StringRef.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102597
Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking where applicable.
Differential revision: https://reviews.llvm.org/D94271
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
TargetList::CreateTarget automatically adds created target to the list, however,
CommandObjectTargetCreate does some additional preparation after creating a target
and which can fail. The command should remove created target if it failed. Since
the function has many ways to return, scope guard does this work safely.
Changes to the TargetList make target adding and selection more transparent.
Other changes remove unnecessary SetSelectedTarget after CreateTarget.
Differential Revision: https://reviews.llvm.org/D93052
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
This reverts commit f775fe59640a2e837ad059a8f40e26989d4f9831.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
There was a little thinko which meant when stopped in a frame with
debug information but whose CU didn't have any global variables we
report:
no debug info for frame <N>
This patch fixes that error message to say the intended:
no global variables in current compile unit
<rdar://problem/69086361>
Update the "image show-unwind" command output to show if the function
being shown is listed as a user-setting or platform trap handler.
Update the individual UnwindPlan dumps to show whether the unwind plan
is registered as a trap handler.
1. Added a new common completion TypeCategoryNames to provide a list of category names for completion;
2. Applied the completion to these commands: type category delete/enable/disable/list/define;
3. Added a related test case;
4. Bound the completion to the arguments of the type 'eArgTypeName'.
Reviewed By: teemperor, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84124
